3M™ Speedglas™ 9000 FlexView

3M Personal Safety
3M Speedglas 9000
FlexView Welding Helmet
™
™
Care and Maintenance
To optimise the effective lifetime of your welding equipment and avoid the additional cost of replacement, regular maintenance is important.
Before Use
• Inspect inner and outer protection plates
and filter glass. Replace if cracked, pitted or
scratched
• Ensure low battery indicator is not flashing
• Inspect the complete Speedglas system for
worn or damaged parts.
Replace if necessary
• Check that the sensors on the welding filter
are clean and uncovered
• Verify the sweatband is in place.
Replace if necessary
• Replace any accessories used as necessary
After Use
• Clean with cloth dampened with a mild
solution of detergent and luke warm water
• Clean the welding filter with a clean, lint-free
tissue or cloth
DO NOT immerse in water
DO NOT use solvents
• Store in a dry, clean area / locker away
from direct sunlight, high temperatures and
solvents Ordering Consumables, Repair Parts and
Accessories
To request a quote or place an order for these
items, please contact your 3M Approved
Distributor.
Further Information and Advice
If you require additional guidance on the
Care and Maintenance of your 3M Welding
Equipment, please contact the Helpline or your
local 3M representative.
16 75 20
16 80 00
16 80 10
16 91 00
70 50 15
16 90 01
42 80 00
42 80 20
42 80 40
16 40 05
42 60 00
42 70 00
42 70 71
40 00 70
40 00 80
40 00 40
43 10 00
3M Health & Safety Helpline
Monday - Friday 9 to 5
0870 60 800 60 UK
1 800 320 500 IRELAND
19 71 40
@3M_UK_Safety
3M Centre
Cain Road, Bracknell
Berkshire RG12 8HT
Tel: 0870 60 800 60
www.3M.co.uk/Safety
17 10 20-23
42 20 00
44 20 00
3M Personal Safety Division
3M United Kingdom plc
16 40 09
44 10 00
42 30 00
44 05 00
3M™ Speedglas™ 9000 FlexView Welding Helmet
Welding helmet with SideWindows and Speedglas 9002V filter, variable shade 9 – 13
Welding helmet with SideWindows and Speedglas 9002X filter, variable shade 9 – 13
Accessories and spare parts Speedglas 9000 FlexView Welding Helmet
Ear and throat protection in leather (3 parts)
Head cover, big
Headband including assembly parts
Sweatband towelling (2 pcs). Also available as a mini pack case of 5 packs
Sweatband in leather
Sweatband fleece
Throat cover
Hood throat/head
Magnifying Lens 1.0
Magnifying Lens 2.5
Welding filter holder
Speedglas 9002D filter shade 9 and 11
Speedglas 9002V filter shade 9-13
Speedglas 9002X filter shade 9-13
Battery pkg of 2
Protective visor 120 x 90 mm, pkg of 10
Outer protection plate standard (pk of 10) marked 42 01 50.
Also available as a mini pack case of 10 packs
Outer protection plate scratch resistant (pk of 10) marked 42 01 0.
Also available as a mini pack case of 5 packs
Outer protection plate heat resistant (pk of 10)
Inner protection plate, pkg of 5. Plate marking 42 02 00
Inner protection plate+1 shade number Speedglas 9002D/9002V (pk of 5)
Inner protection plate+2 shade number Speedglas 9002D/9002V (pk of 5)
Battery cover (pk of 2)
Speedglas FlexView Conversion Kit
Middle shield, black
Heat reflecting front, silver
3M Ireland Limited
The Iveagh Building
The Park
Carrickmines
Dublin 18
Tel: 1 800 320 500
17808
3M and Speedglas are trademarks of 3M Company
Please recycle. Printed in UK.
© 3M 2014. All rights reserved.
REPLACE ALL DAMAGED PARTS IMMEDIATELY TO ENSURE
CORRECT LEVELS OF PROTECTION
For more information on all our products, call 3M Personal Safety Division on 0870 60 800 60 (UK) and 1800 320 500 (Ireland) or visit www.3M.co.uk/safety
CH9000FVWCMP
To download this poster please visit:
www.3M.co.uk/maintenancepack or scan the QR code
3M Part No
44 18 70
44 18 80
16 40 05
16 40 09
70 50 15
16 75 20
16 80 00
16 80 10
16 90 01
16 91 00
17 10 20
17 10 23
19 71 40
40 00 40
40 00 70
40 00 80
42 20 00
42 30 00
42 60 00
42 70 00
42 70 71
42 80 00
42 80 20
42 80 40
43 10 00
44 05 00
44 10 00
44 20 00