Fulham Electronic Ballasts

Lighting...Global. Intelligent. Sustainable.
Fulham Electronic Ballasts
FLUORESCENT
230 • 240 50/60Hz
Product Numbering System
Fulham Co. Ltd.
12705 S. Van Ness Ave., Hawthorne CA
Page
13
Date
T5/T8
2011/11/29
FLUORESCENT
ELECTRONIC BALLASTS
G l oba l R egu l a(Example)
r B a l l a st M od el N u m ber
MASTER MODEL NUMBER REFERENCE
HSC
240
1
36
X
T8
O
A
E
F u n ct i on
A = Nothing C = EMI
B = Over Voltage Protection
D = EMI + Over Voltage Protection
E = High Voltage Rating
F = High Voltage Rating + EMI
C er t i fi ca t i on
U = UL, cULus
E = CE
V = VDE, TUV, ENEC J = CCC
L = UL Only
A = None
D i m m i n g C on t r ol T y p e
A = Dali
B = DMX
N = DMX + Dali M = 0-10V (2 Wire)
T = Triac
O = Non Dimming
R = Wireless Remote
S = Sensor 0-10V (4 Wire)
L am p T ype
12 = T12
T8 = T8
T5 = T5
CF = CFL
C a se T y p e
L = Long Metal C = Cube Metal
X = Long Plastic Y = Cube Plastic
B = Back Leads Metal N = only PCB without cabinet
Z = Back Leads Plastic
I = Long Metal Slim
H = Long Plastic Slim
U = Ultra Long Plastic Slim
T a r get L a m p P ow er
N u m ber of L a m p s
I n p u t V ol t a ge
UNV = 120V-277V
MLT = 120V - 240V
MID = 208V - 240V
MIE = 240V - 277V
MIF = 208V - 277V
230 = 220V-240V
# # # = Dedicated e.g. 120V
R egu l a r B a l l a st T y p e
RHA = Active Power Factor Correction + Preheat Start
HPY = High Power Factor + Rapid Start
NPY = Normal Power Factor + Rapid Start
HSC = Passive Power Factor Correction + Rapid Start
NSC = Normal Power Factor + Rapid Start (Economic)
Model Number
Approved by: Fengchang (Mike) Hu – Oct. 10, 2011
Ver. 2.3
Operates Lamps
Ballast Size
HPY-230-118-XT8-OAA
1 x F18T8
L 150mm, W 40mm, H 28mm / L 5.905", W 1.575", H 1.102"
HPY-230-136-XT8-OAA
1 x F36T8
L 150mm, W 40mm, H 28mm / L 5.905", W 1.575", H 1.102"
HPY-230-218-XT8-OAA
2 x F18T8
L 150mm, W 40mm, H 28mm / L 5.905", W 1.575", H 1.102"
HPY-230-236-XT8-OAA
2 x F36T8
L 210mm, W 40mm, H 30mm / L 8.267", W 1.575", H 1.181"
HPY-230-418-XT8-OAA
4 x F18T8
L 210mm, W 40mm, H 30mm / L 8.267", W 1.575", H 1.181"
HPA-MLT-118-XT8-OAA
1 x F18T8
L 140mm, W 40mm, H 28mm / L 5.512", W 1.575", H 1.102"
HPA-MLT-136-XT8-OAA
1 x F36T8
L 140mm, W 40mm, H 28mm / L 5.512", W 1.575", H 1.102"
HPA-MLT-218-XT8-OAA
2 x F18T8
L 140mm, W 40mm, H 28mm / L 5.512", W 1.575", H 1.102"
HPA-MLT-236-XT8-OAA
2 x F36T8
L 200mm, W 40mm, H 30mm / L 7.874", W 1.575", H 1.181"
HPA-MLT-418-XT8-OAA
4 x F18T8
L 200mm, W 40mm, H 30mm / L 7.874", W 1.575", H 1.181"
2
FLUORESCENT
230 • 240 50/60Hz
Model Number
Description
Type
Termination
HSC 240 111 YCF OAA
1X11W<35% THD CFL D/E 2/4 PIN
Economic
Connector
HSC 240 118 YCF OAA
1X18W<35% THD CFL D/E 2/4 PIN
Economic
Connector
HSC 240 118 HT8 OAA
1X18W<35% THD FTL T8 (Also for 1X20W T12 and 1X18W PLL “L” lamps)
Economic
Wire
HSC 240 136 HT8 OAA
1X36W<35% THD FTL T8 (Also for 1X40W T12 and 1X36W PLL “L” lamps)
Economic
Wire
HSC 240 118 XT8 OAA
1X18W<35% THD FTL T8 (Also for 1X20W T12 and 1X18W PLL “L” lamps)
Economic
Wire
HSC 240 136 XT8 OAA
1X36W<35% THD FTL T8 (Also for 1X40W T12 and 1X36W PLL “L” lamps)
Economic
Wire
HSC 240 118 UT8 OAA
1X18W<35% THD FTL T8 (Also for 1X20W T12 and 1X18W PLL “L” lamps)
Economic
Wire/Connector
HSC 240 136 UT8 OAA
1X36W<35% THD FTL T8 (Also for 1X40W T12 and 1X36W PLL “L” lamps)
Economic
Wire/Connector
HSC 240 136 XT8 OAE
1X36W<30% THD FTL T8 (Also for 1X40W T12 and 1X36W PLL “L” lamps)
Commercial
Wire
HSC 240 114 UT5 OAE
1X14W<30% THD FTL T5
Commercial
Wire/Connector
HSC 240 124 UT5 OAE
1X24W<30% THD FTL T5
Commercial
Wire/Connector
HSC 240 128 UT5 OAE
1X28W<30% THD FTL T5
Commercial
Wire/Connector
HSC 240 136 UT8 OAE
1X36W<30% THD FTL T8 (Also for 1X40W T12 and 1X36W PLL “L” lamps)
Commercial
Wire/Connector
HSC 240 218 UT8 OAE
2X18W<30% THD FTL T8 (Also for 2X20W T12 and 2X18W PLL “L” lamps)
Commercial
Wire
HSC 240 118 UT8 OAE
1X18W<30% THD FTL T8 (Also for 1X20W T12 and 1X18W PLL “L” lamps)
Commercial
Wire/Connector
HSC 240 128 NT5 OAE
1x28W<20% THD FTL T5 (No case; only PCB without cabinet)
Commercial
Wire
HPY 240 218 YCF OAE
2X18W<20% THD CFL D/E 4 PIN
Professional
Connector
HPY 240 226 YCF OAE
2X26W<20% THD CFL D/E 4 PIN
Professional
Connector
HPY 240 218 YCF OAF
2X18W<10% THD CFL D/E 4 PIN
Professional
Connector
HPY 240 226 YCF OAF
2X26W<10% THD CFL D/E 4 PIN
Professional
Connector
HPY 240 218 LT8 OAE
2X18W<20% THD FTL T8 (Also for 2X20W T12 and 2X18W PLL “L” lamps)
Professional
Connector
HPY 240 136 LT8 OAE
1X36W<20% THD FTL T8 (Also for 1X40W T12 and 1X36W PLL “L” lamps)
Professional
Connector
HPY 240 236 IT8 OAE
2X36W<20% THD FTL T8 (Also for 2X40W T12 and 2X36W PLL “L” lamps)
Professional
Connector
HPY 240 114 LT5 OAE
1X14W<20% THD FTL T5
Professional
Connector
HPY 240 214 LT5 OAE
2X14W<30% THD FTL T5
Professional
Connector
HPY 240 224 LT5 OAE
2X24W<30% THD FTL T5
Professional
Connector
HPY 240 128 LT5 0AE
1X28W<20% THD FTL T5
Professional
Connector
HPY 240 228 IT5 OAE
2X28W<20% THD FTL T5
Professional
Connector
HPY 240 136 IT8 OAF
1X36W<10% THD FTL T8 (Also for 1X40W T12 and 1X36W PLL “L” lamps)
Professional
Connector
HPY 240 236 IT8 OAF
2X36W<10% THD FTL T8 (Also for 2X40W T12 and 2X36W PLL “L” lamps)
Professional
Connector
HPY 240 114 IT5 OAF
1X14W<10% THD FTL T5
Professional
Connector
HPY 240 214 IT5 OAF
2X14W<10% THD FTL T5
Professional
Connector
HPY 240 124 IT5 OAF
1X24W<10% THD FTL T5
Professional
Connector
HPY 240 224 IT5 OAF
2X24W<10% THD FTL T5
Professional
Connector
HPY 240 128 IT5 OAF
1X28W<10% THD FTL T5
Professional
Connector
HPY 240 228 IT5 OAF
2X28W<10% THD FTL T5
Professional
Connector
RHA 240 154 LT5 OAD
1X54W<10% THD FTL T5 (Also for 1X T8 58W, 1X TC-L 55W lamp)
Professional
Connector
RHA 240 254 LT5 OAD
2X54W<5% THD FTL T5 (Also for 2X T8 58W, 2X TC-L 55W lamp)
Professional
Connector
RHA 240 414 LT5 OAD
4X14W<5% THD FTL T5 (Also for 3X T5 14W lamp)
Professional
Connector
3
FLUORESCENT
230 50/60Hz
RoHS
VDE
COMPLIANT
FLUORESCENT
ELECTRONIC BALLASTS
FEATURES
APPLICATIONS
• ENEC / VDE / EMC certified
• Designed to CE requirements
• Programmed Preheat Lamp Start
• Cut-Off Technology
• End of Life Protection (EOL)
• High Power Factor
• Active Power Factor Control (APFC)
• Auto-Restart
• Standard distances between the mounting holes
• Solid Housing and Electronics
• 5 Year Warranty - 50,000 hour life
• Decorative
• Architectural
• Industrial
• Commercial
• Wall Washing / Flood Lighting
COMMON SPECIFICATIONS
Input Voltage:
220 - 240 VAC (±10%)
Power Line Frequency:
50/60Hz
Overvoltage Consistency (V AC, 1h):
320
Power Factor - APFC (λ):
≥ 0.96
< 10%
Line Current Harmonics:
Lamp Operating Frequency:
> 42,000Hz
Preheat Lamp Start (Seconds):
≤ 1.5
Max. Case Hot Spot Temperature Tc:
70ºC
Ambient Temperature: CFL: -25°C to +60°C; T5/T8: -25°C to +50°C
Expected Service Life at Ta max.:
50,000 hours
CFL LAMP OPERATION
BALLASTS
10W
RHS 230 113 C CFL
1
1
RHS 230 118 C CFL
1
RHS 230 142 C CFL
1
RHS 230 213 C CFL
2
RHS 230 218 C CFL
2
RHS 230 232 C CFL
2
RHS 230 242 C CFL
2
TC-DEL (Quad)
13W
18W
26W
TC-TEL (Triple)
18W 26W
32W
13W
1
TC-SEL (Twin)
9W
11W
1
1
2
2
1
1
2
TC-L (Twin Hi-Lumen)
18W
21W
42W
1
1
1
2
1
1
1
1
2
2
2
2
2
2
2
Ballast Size 1 (L x W x H in mm): 280 x 30 x 21 - Ballast Size 2 (L x W x H in mm): 360 x 30 x 21
BALLASTS
BALLAST
SIZE
14W
21W
28W
T16 (T5)
35W
RHS 230 135 L T5
1
1
1
1
1
RHS 230 149 L T5
1
RHS 230 154 L T5
1
RHS 230 180 L T5
2
RHS 230 235 L T5
2
RHS 230 249 L T5
2
RHS 230 254 L T5
2
RHS 230 414 L T5
2
T8 LAMP OPERATION
Yes
Yes
Yes
CFL: Thermoplast - T5/T8: Metal
EN 61547
EN 61000-3-2
EN 55015
EN 60929:2006-03
EN 61347-1:2008+A1:2011-02
EN 61347-2-3: 2011+AC:2011-11
Ballast Size 1 (L x W x H in mm): 103 x 67 x 31 - Ballast Size 2 (L x W x H in mm): 123 x 79 x 31
BALLAST
SIZE
T5 LAMP OPERATION
Automatic Restart after lamp change:
Cut-Off Technology:
End of Life Protection (EOL):
Case Material:
Immunity:
Harmonic Content:
Radio Interference Suppression:
ENEC, VDE, CE:
49W
54W
80W
TC-L (Twin Hi-Lumen)
55W
1
1
1
1
2
2
2
2
2
2
3/4
Ballast Size 1 (L x W x H in mm): 280 x 30 x 21 - Ballast Size 2 (L x W x H in mm): 360 x 30 x 21
BALLASTS
BALLAST
SIZE
18W
1
RHS 230 118 L T8
1
RHS 230 136 L T8
1
RHS 230 158 L T8
1
RHS 230 218 L T8
1
RHS 230 236 L T8
1
RHS 230 258 L T8
1
RHS 230 418 L T8
2
T26 (T8)
36W
58W
18W
TC-L (Twin Hi-Lumen)
24W
36W
40W
1
1
1
1
1
1
2
2
2
2
2
3/4
4
FLUORESCENT
230 50/60Hz
RoHS
DIMMABLE
FLUORESCENT
ELECTRONIC BALLASTS
FEATURES
COMPLIANT
APPLICATIONS
• Designed to CE requirements
• Decorative
• ENEC/VDE Certified
• Architectural
• Programmed Preheat Lamp Start
• Industrial
• Dimming 0-10V
• Commercial
• Cut-Off Technology
• Wall Washing / Flood Lighting
• End of Life Protection (EOL)
• High Power Factor
• Active Power Factor Control (APFC)
• Auto-Restart
• Standard distances between the mounting holes
• Solid Housing and Electronics
• 5 Year Warranty - 50,000 hour life
COMMON SPECIFICATIONS
Input Voltage:
Power Line Frequency:
Input Power Factor (PF) (λ):
Line Current Harmonics (ATHD):
Dimming Interface:
Lamp Operating Frequency:
Lamp Starting Type:
Preheat Time [S]:
Overvoltage Protection [V, hr]:
Undervoltage Protection [V]:
220 - 240 VAC
50/60Hz
> 0.98
< 10%
0 to 10V
> 42,000Hz
Programmed Preheat
< 1.5
Yes
Yes
Expected Service Life at Ta max.:
50,000 hours
CFL LAMP OPERATION
Yes
Yes
Yes
CFL: Thermoplast - T5/T8: Metal
EN 61547
EN 61000-3-2
EN 55015
EN 60929:2006-03
EN 61347-1:2008+A1:2011-02
EN 61347-2-3: 2011+AC:2011-11
Ballast Size 1 (L/W/H in mm): 103 x 67 x 31 Ballast Size 2 (L/W/H in mm): 123 x 79 x 31
BALLASTS
BALLAST
SIZE
RHD 230 140 C CFL
RHD 230 213 C CFL†*
RHD 230 218 C CFL†*
RHD 230 232 C CFL†*
1
2
2
2
T5 LAMP OPERATION
Automatic Restart after lamp change:
Cut-Off Technology:
End of Life Protection (EOL):
Case Material:
Immunity:
Harmonic Content:
Radio Interference Suppression:
ENEC, VDE, CE:
TC-DEL (Quad)
10W
2
13W
TC-TEL (Triple)
18W
26W
13W
2
18W
26W
T16R (T5 Circline)
32W
22W
40W
1
1
2
2
2
2
2
2
Ballast Size 1 (L x W x H in mm): 280 x 30 x 21 - Ballast Size 2 (L x W x H in mm): 360 x 30 x 21
BALLASTS
BALLAST
SIZE
RHD 230 135 L T5†*
RHD 230 235 L T5†*
RHD 230 139 L T5
RHD 230 239 L T5†
RHD 230 154 L T5
RHD 230 254 L T5†
RHD 230 414 L T5
T16 (T5)
35W
14W
21W
28W
1
2
1
2
1
2
2
1
2
1
2
1
2
RHDC 230 135 L T5
1
1
1
1
1
RHDC 230 235 L T5†
2
2
2
2
2
39W
54W
1
2
1
2
1
2
4
RACEHORSE DIMMABLE AUTO-DIM
T8 LAMP OPERATION
Ballast Size 1 (L x W x H in mm): 280 x 30 x 21 - Ballast Size 2 (L x W x H in mm): 360 x 30 x 21
BALLASTS
BALLAST
SIZE
RHD 230 136 L T8†
RHD 230 236 L T8†
RHD 230 158 L T8†
RHD 230 258 L T8†
RHD 230 418 L T8
1
2
1
2
2
T26 (T8)
18W
36W
58W
1
2
1
2
4
5
FLUORESCENT
120-277 UNV 50/60Hz
CFL FLUORESCENT
ELECTRONIC BALLASTS
FEATURES
APPLICATIONS
• 120V-277V
• < 10% ATHD
• High Power Factor
• End of Life (EOL) Protection
• Operate 1 or 2 Lamps
• Twin, Triple, Quad, Double Quad 9-70W
• UL, cULus
• 90ºC Max. Operating Temp.
• -30ºC Min. Start Temp.
• Compact Case
• No studs on bottom plate
• Retail & Industrial Medium & High Bay
• Canopy Lighting
• Flood Lighting
• Parking Garages
• Gymnasiums
• Indirect Wall Washing
• Downlighting
• Outdoor Architectural
• Post Tops
• Wall Sconces
• Ceiling Surface Mount
• Air Handling Spaces (BLS Models)
RaceHorse Kits
COMMON SPECIFICATIONS
Operating Voltage:
120V-277V (Universal Voltage)
Lamp Starting Temp.:
See Lamp Specifications
Frequency:
50/60Hz
Ballast Maximum Case Temp.:
167ºF­­­­­­­ (75ºC) - 5 Year Warranty
ATHD:
< 10% Meets ANSI C82.11-1993
Ballast Maximum Case Temp.:
194ºF­­­­­­­ (90ºC) - 3 Year Warranty
Protection/Output:
Open Lamp, Shorted Lamp, End of Life
Ballast Lamp Starting Mode:
Programmed Start
Input Over Current Protection:
Fuse
Inherent Thermal Protection
Class P
Transient Protection:
C62.41 Class A 7 strikes
Sound Rating
"A"
Regulatory Approvals:
UL & cULus Listed Type 1 Outdoor
Remote Mounting
18’ Maximum at -18ºC
High Power Factor:
> .98
Anti-Arcing Protection
UL Type CC
Open Circuit Voltage:
< 300V RMS Max.
Ballast Min. Operating Temp.:
-22°F (-30ºC)
RHA-EMI: FCC CFR Title 47 Part 18 non-consumer
(RH-EMI: FCC CFR Title 47 Part 18 consumer & non-consumer)
BLS models are approved for air handling spaces
RACEHORSE 1
Model No.
RHA-UNV-213-C
Max Load
26W
Max Input Current .28 AMP
Ballast Size
L 5.1", W 2.4", H 1"
(4.3" case)
Ballast Weight
5.2 oz.
Case Quantity
BLS Models: 50 pcs/ case
C Models: 50 pcs/ case
Kits (K): 20 pcs/ case
RACEHORSE 2†
RHA-UNV-218-C
36W
.344 AMP
L 5.1", W 2.4", H 1"
(4.3" case)
5.2 oz.
BLS Models: 40 pcs/ case
C Models: 50 pcs/ case
Kits (K): 20 pcs/ case
RACEHORSE 3†
RHA-UNV-226-C
57W
.52 AMP
L 5.1", W 2.4", H 1"
(4.3" case)
5.2 oz.
BLS Models: 40 pcs/ case
C Models: 50 pcs/ case
Kits (K): 20 pcs/ case
RACEHORSE 4†
RHA-UNV-242-C
84W
.752 AMP
L 5.1", W 2.4", H 1"
(4.3" case)
7 oz.
BLS Models: 50 pcs/ case
C Models: 50 pcs/ case
Kits (K): 30 pcs/ case
LAMP OPERATION
Model Number
RHA-UNV-213-C
RHA-UNV-218-C
RHA-UNV-226-C
# of Lamps
1x
2x
1x
2x
1x
2x
1x
RHA-UNV-242-C
2x
Lamp Type / Designation
13CFQ, 13CFTR, 2D16W
7CFT, 9CFT, 13CFQ, 13CFTR, 2D10W
18CFQ, 18CFTR, 2D21W
18CFQ, 18CFTR, 2D16W, 2D21W
13CFT, 26CFQ, 26CFTR, 32CFTR, 42CFTR, 2D21W, 2D28W, 2D38W, T5CR22W, FT18, FT36/39,
T5CR40W, FT24/27, 57CFM
13CFT, FT18W, 26CFQ, 26CFTR, FT24/27, 2D21W, F24T5HO
CFM57, CFM70, 42CFTR, FT24/27, FT36/39, FT40, 2D28W, 2D38W, T5CR40W, 36TUV, GPH793T5L
26CFQ, 26CFTR, 32CFTR, 42CFTR, FT24/27, FT36/39, FT40, 2D28W, 2D38W, T5CR22W, T5CR40W,
36TUV, GPH793T5L
† These products have previously been tested as per SASO guidelines and comply with the SASO standards. If you are
interested in your shipment being accompanied by a SASO conformity certificate, this can be arranged at cost for the testing.
Please contact the Middle East regional office for details.
6
FLUORESCENT
120-277 UNV 50/60Hz
T5HO & T5HE FLUORESCENT
ELECTRONIC BALLASTS
FEATURES
APPLICATIONS
• 120V-277V
• < 10% ATHD
• High Power Factor
• End of Life (EOL) Protection
• Operate 1x, 2x, 3x & 4x Lamps
• TW, CR, T5HO, T5HE
• UL, cULus
• Programmed Preheat Start
• Retail and Industrial Medium and High Bay
• Canopy Lighting
• Flood Lighting
• Parking Garages
• Gymnasiums
• Indirect Wall Washing
• Downlighting
• Outdoor Architectural
• Post Tops
COMMON SPECIFICATIONS
Operating Voltage:
120V-277V (Universal Voltage)
High Power Factor:
> .98
Frequency:
50/60Hz
Open Circuit Voltage:
600 V RMS Max.
ATHD:
< 10%
Ballast Min. Operating Temp.:
-18°C (0°F)
Protection/Output:
Protection/Input:
End of Life (EOL)
Ballast Maximum Case Temp.:
167ºF­­­­­­­ (75ºC) - 5 Year Warranty
Over Current:
Fuse
Ballast Maximum Case Temp.:
194ºF­­­­­­­ (90ºC) - 3 Year Warranty
Transient Protection:
C62.41 Class A 7 strikes
Ballast Lamp Starting Mode:
Programmed Preheat Start
EMI: FCC CFR Title 47 Part 18 non-consumer
Inherent Thermal Protection
Class P
Regulatory Approvals:
Sound Rating
"A"
UL & cULus Listed Type 1 Outdoor
Model No.
RH21-UNV-224 LT5
RHA-UNV-224-LT5
RH22-UNV-239 LT5
RHA-UNV-239-LT5
Max. Load
52W
54W
87W
93W
Max. Current
0.44 AMP
0.45 AMP
0.73 AMP
0.78 AMP
Ballast Size
L 16.89", W 1.20", H 1"
L 9.45", W 1.31", H 1.06"
L 16.34", W 1.18", H 1"
L 9.45", W 1.31", H 1.06"
Connector Type
No Leads
Leads
No Leads
Leads
Case Quantity
20 pcs.
20 pcs.
20 pcs.
20 pcs.
Compliance
RoHS
RoHS
RoHS
RoHS
Model No.
RH23-UNV-254 LT5
RH28-UNV-454 LT5
RH13-UNV-228 LT5
RHA-UNV-228-LT5
RH14-UNV-235 LT5
Max. Load
115W
238W
67W
67W
77W
Max. Current
0.96 AMP
1.96 AMP
0.56 AMP
0.56 AMP
0.64 AMP
Ballast Size
L 16.88", W 1.23", H 1"
L 16.88", W 2.29", H 1"
L 16.89", W 1.20", H 1" L 9.45", W 1.31", H 1.06" L 16.89", W 1.20", H 1"
Connector Type
Push-in
Leads
No Leads
Leads
No Leads
Case Quantity
30 pcs.
15 pcs.
20 pcs.
20 pcs.
20 pcs.
RoHS
RoHS
RoHS
Compliance
LAMP OPERATION
Model Number
RH21-UNV-224 LT5
RHA-UNV-224-LT5
RH22-UNV-239 LT5
RHA-UNV-239-LT5
RH23-UNV-254 LT5
RH28-UNV-454 LT5
RH13-UNV-228 LT5
RHA-UNV-228-LT5
RH14-UNV-235 LT5
# of Lamps
1x
2x
1x
2x
1 each
1x
2x
3x
4x
1x
2x
1x
2x
Lamp Type / Designation
F24T5HO, F39T5HO, FT24W, T5CR22W, T5CR40W, FT40W, FT36W
F24T5HO, FT24W, T5CR22W
F39T5HO, F24T5HO, T5CR40W, T5CR22W, FT36W, FT24W, FT40W
F39T5HO, F24T5HO, T5CR40W, T5CR22W, FT36W, FT24W
T5CR22W + T5CR40W
F54T5HO, FT55W, FT50W, FT36W, FC12T5 55W
F54T5HO, FT55W, FT50W, FT36W, FC12T5 55W
F54T5HO, FT55W, FT50W, FT36W, FC12T5 55W
F54T5HO, FT55W, FT50W, FT36W, FC12T5 55W
F28T5/HE, F21T5/HE, F14T5/HE
F28T5/HE, F21T5/HE, F14T5/HE
F35T5/HE, F28T5/HE, F21T5/HE
F35T5/HE, F28T5/HE, F21T5/HE, F14T5/HE
7
FLUORESCENT
COMMERCIAL GRADE
220 • 120-240 MLT 50/60Hz
COMMERCIAL GRADE
T8/T12 FLUORESCENT
ELECTRONIC BALLASTS
COMMON SPECIFICATIONS
LAMP OPERATION
Input Voltage:
Power Factor:
Efficacy Factor:
ATHD:
Current Crest Factor:
Sound Rating:
Ballast Type:
Voltage Transients:
Min. Operating Temp.:
Max. Case Temp.:
Model Number
220V ± 10%, 50/60Hz
> 0.98
> 88%
< 25%
< 1.7
"A"
Rapid Start
ANSI 62.41
-10ºC (14ºF)
75ºC (167ºF)
BALLAST SIZES (mm)
WHCG5 220 T12 RS
WHCG5 220 T12 RS L
WHCG6 220
L 235, W 40, H 25.4
L 240.5, W 43.8, H 25.4
L 240.5, W 43.7, H 25.4
# of Lamps
Lamp Type / Designation
WHCG5 220 T12 RS
WHCG5 220 T12 RS L*†
1 x, 2 x
F36T8, F40T12
WHCG6 220 T12 RS
WHCG6 220 T12 RS L*†
1 x, 2 x
F18T8, F20T12
WHCG9 220 T12 RS
2x
3 x, 4 x
F36T8, F40T12
F18T8, F20T12
*Ballasts with lead wire lengths as follows:
Black
630mm
Red
730mm
White
630mm
Blue
710mm
Yellow
1210mm
PROJECT GRADE
T8/T12 FLUORESCENT
ELECTRONIC BALLASTS
COMMON SPECIFICATIONS 220V
LAMP OPERATION 220V
Input Voltage:
220V ± 10%, 50/60Hz
Model Number
Power Factor:
> 0.98
Efficacy Factor:
> 88%
ATHD:
< 10%
Current Crest Factor:
< 1.7
EMI/RFI Compliance:
FCC PART 18, non-consumer
Sound Rating:
"A"
Ballast Type:
Rapid Start
Voltage Transients:
ANSI 62.41
Min. Operating Temp.:
-10ºC (14ºF)
Max. Case Temp.:
75ºC (167ºF)
Approvals/Class:
UL Listed, Class P, 1 Outdoor
# of Lamps
Lamp Type
WHSG5 220 T12 RS
1 x, 2 x
F36T8, F40T12
WHSG6 220 T12 RS
1 x, 2 x
F18T8, F20T12
WHSG9 220 T12 RS
2x
3 x, 4 x
F36T8, F40T12
F18T8, F20T12
†
†
WHSG5-220 - Ballast Size (mm): 235 L x 40 W x 25.4 H
WHSG6-220 - Ballast Size (mm): 235 L x 40 W x 25.4 H
WHSG9-220 - Ballast Size (mm): 255 L x 40 W x 25.4 H
COMMON SPECIFICATIONS 120-240V
LAMP OPERATION MLT 120-240V
Input Voltage:
120V-240V ± 10%, 50/60Hz
Power Factor:
> 0.98
Model Number
Efficacy Factor:
> 88%
ATHD:
< 10%
Current Crest Factor:
<1.7
EMI/RFI Compliance:
FCC PART 18, non-consumer
Sound Rating:
"A"
Ballast Type:
Rapid Start
Voltage Transients:
ANSI 62.41
Min. Operating Temp.:
-10ºC (14ºF)
Max. Case Temp.:
75ºC (167ºF)
Approvals/Class:
UL Listed, Class P, 1 Outdoor
WHSG5 MLT T12 RS
# of Lamps
†
1 x, 2 x
WHSG6 MLT T12 RS†
1x
2x
WHSG9 MLT T12 RS†
2x
3 x, 4 x
Lamp Type
F36T8, F40T12
F18T8, F36T8, F20T12, F40T12
F18T8, F20T12
F36T8, F40T12
F18T8, F20T12
WHSG5-MLT - Ballast Size (mm): 235 L x 40 W x 25.4 H
WHSG6-MLT - Ballast Size (mm): 235 L x 40 W x 25.4 H
WHSG9-MLT - Ballast Size (mm): 255 L x 40 W x 25.4 H
† These products have previously been tested as per SASO guidelines and comply with the SASO standards. If you are
interested in your shipment being accompanied by a SASO conformity certificate, this can be arranged at cost for the testing.
Please contact the Middle East regional office for details.
8
FLUORESCENT
120-277 UNV 50/60Hz
SPECIFIER GRADE
T8/T12 FLUORESCENT
ELECTRONIC BALLASTS
FEATURES
APPLICATIONS
• Drop In Replacement for Magnetic Ballasts
• Parallel Lamp Operation
• Specifier Grade = < 10% ATHD
• High Ballast Factor (1.18) Available
• Low Ballast Factor (0.78) Available
• Offices
• Schools
• Hotels
• Apartments
• Retirement Complexes
• Industrial
• Retail Stores
COMMON SPECIFICATIONS
LAMP OPERATION
Power Factor:
Model Number
98.5 % Min.
# of Lamps
Lamp Type / Designation
Universal Voltage for T8 - (Instant Start) <10% ATHD
ATHD:
Less than 10%
EMI: FCC CFR Title 47 Part 18 non-consumer
Ballast Factor::
>.87
Lamp CF:
< 1.7
Starting Method:
T8: Instant Start
T12HO: Modified Rapid Start
Regulatory Approvals: UL & cULus Listed Type1 or
Type 2
Min. Starting Temp. :
0°F (-18°C)
Inherent Thermal
Class P
Protection:
Transient Protection:
C62.41 Class A 7 strikes
Ballast Sizes:
T8: L 9.5”, W 1.38”, H 1.0”
(L 240mm, W 35mm, H 25mm)
T12HO: L 11.75”, W 2.3”, H 1.6”
(L 299mm, W 58mm, H 41mm)
Weights:
T8: 1.5 lbs. (700g)
T12HO: 4.0 lbs. (1.8 kg)
WHSG1-UNV-T8-IS
1x
1x
WHSG2-UNV-T8-IS
2x
2x
3x
3x
4x
1x
2x
WHSG3-UNV-T8-IS
WHSG4-UNV-T8-IS
WHSG8-UNV-T8 SL
F17T8, F25T8, F32T8, F40T8, FBO31T8,
F32T8/30, F32T8/28, F32T8/25
F17T8, F25T8, F32T8, F40T8, FBO31T8,
F32T8/30, F32T8/28, F32T8/25
F17T8, F25T8, F32T8, FBO31T8,
F32T8/30, F32T8/28, F32T8/25
F25T8, F32T8, F40T8
F17T8, F25T8, F32T8
F25T8, F32T8, F40T8
F17T8, F25T8, F32T8
F96T8, F96T8HO,
F96T8
Model No.
WHSG1-UNV-T8-IS
WHSG2-UNV-T8-IS
WHSG3-UNV-T8-IS
WHSG4-UNV-T8-IS
WHSG8-UNV-T8 SL
Input Voltage
120V-277V
50/60Hz
120V-277V
50/60Hz
120V-277V
50/60Hz
120V-277V
50/60Hz
120V-277V
50/60Hz
Input Power
33W
59W
85W
112W
109W
Max. Current
.28 AMP
.50 AMP
.71 AMP
.93 AMP
.92 AMP
Black/White Wires
24"
24"
24"
28"
25"
Red Wires
46"
46"
46"
30"
79"
Blue Wires
32"
32"
32"
30"
46"
Yellow Wires
N/A
N/A
N/A
46"
N/A
Case Qty
25 pcs.
25 pcs.
25 pcs.
25 pcs.
25 pcs.
NEMA
Premium



NEMA Premium / CEE Lamp Ballast Combinations: These ballasts meet new, high efficiency standards in combination with T8 four foot lamps.
Please contact Fulham Customer Service for details.
9
FLUORESCENT
230 50/60Hz
COMMON SPECIFICATIONS
Operating Voltage:
230VAC±10%
Frequency:
50/60Hz
Starting Type:
230V FLUORESCENT
Rapid Start
ELECTRONIC
BALLASTS
Starting Temperature:
14ºF (-10°C)
COMMON SPECIFICATIONS
Ballast Max Case Temperature: 158ºF (70ºC)
Operating Voltage:
230VAC±10%
Transient Protection:
Frequency:
50/60Hz
EMI: FCC CFR Title 47 Part 18 non-consumer
Starting Type:
Rapid Start
Sound Rating:
"A"
Starting Temperature:
14ºF (-10°C)
CCF:
< 1.7
Normal Power Factor:
> .5
Ballast Max Case Temperature: 158ºF (70ºC)
C62.41 Class A 7 strikes
Model Number
Operates Lamps
Ballast Size
SC-230-113-LT5
1 x F8T5, F13T5
L 121mm, W 24mm, H 19mm / L 4.76", W .95", H .73"
SC-230-118-LT8
1 x F18T8
L 121mm, W 24mm, H 19mm / L 4.76", W .95", H .73"
FLUORESCENT
120 50/60Hz
LINEAR, COMPACT
& CIRCLE LAMP
ELECTRONIC BALLASTS
COMMON SPECIFICATIONS
Operating Voltage:
120VAC±10% or
230VAC±10%
Frequency:
50/60Hz
Starting Type:
Rapid Start
Starting Temperature: 14ºF (-10°C)
Ballast Max Case Temperature: 158ºF (70ºC)
Transient Protection:
C62.41 Class A 7
strikes
Regulatory Approvals:
UL & cULus Listed
Type 1 or Type 2
EMI: FCC CFR Title 47 Part 18 non-consumer
Sound Rating:
"A"
CCF:
< 1.7
Normal Power Factor:
> .5
LAMP OPERATION
SUGARCUBES FOR T5, T8
Model Number
Operates Lamps
SC-120-108-LT5*
1 x F6T5, F8T5
SC-120-113-LT5*
1 x F13T5, F14T5
Ballast Size: L 4.76", W 1.05", H .76"
SC-120-125-LT8*
1 x F17T8, F25T8
Ballast Size: L 4.76", W .95", H .73"
SUGARCUBES FOR CFL
SC-120-113-CFL*
1 x 13CFQ/E, F15T8, F17T8, 13W Spiral
SC-120-118-CFL
1 x 18CFQ/E, 18CFTR/E
Ballast Size: L 3.09", W 1.45", H 1"
*Also cULus listed.
10
ELECTRONIC HID
220-240 50/60Hz
LOW FREQUENCY
230V ELECTRONIC HID
MH BALLASTS
FEATURES
• Outdoor Listed
• Energy-Efficient Compared to Magnetic • Superior Lumen Maintenance
• Faster Strike and Restrike Times
• Low Noise
• Extended Lamp Life
• Light Weight, Compact Ballast Profiles
• Less Color Shift Over Time
Frequency
50/60Hz
Short Circuit Operation Protection
Yes
CCF
<1.5
Open Circuit Operation Protection
Yes
Min Starting Temp.
-30ºC/-20ºF
Ignitor Failure Protection
Yes
Max Case Temp.
85ºC
End of Lamp Life Protection
Yes
EMI/RFI
FCC PART18 CLASS A, NON-CONSUMER
Thermal Protection
Yes
MODELS
DESCRIPTION
CASE SIZE (mm) LxWxH
CASE SIZE (inches) LxWxH
H1-230-20HSC
20/22W 220-240V MH Side Terminals
100 x 74.5 x 32*
4.33" x 2.95" x 1.26"*
H2-230-35HSC
35W 220-240V MH Side Terminals
100 x 74.5 x 32*
4.33" x 2.95" x 1.26"*
H5-230-70HSC
70W 220-240V MH Side Terminals
100 x 74.5 x 32*
4.33" x 2.95" x 1.26"*
H7-230-150HSC
150W 220-240V MH Side Terminals
164 x 91 x 38**
6.57" x 3.58" x 1.50"**
*Mounting length 97mm/3.81” (20-70W)
**Mounting length 154mm/6.06” (150W)
ELECTRONIC HID
220-240 50/60Hz
INDUSTRIAL
230V ELECTRONIC HID
MH BALLASTS
LAMP DATA
CATALOG NUMBER
INPUT VOLTS
(V)
LINE CURRENT
(A)
INPUT POWER
(W)
MINIMUM
POWER FACTOR
TC MAX
(ºC)
250
1
HXE-230-250-HBSLS
220-240
1.23
275
≥ 0.98
80
400
1
HXE-230-400-HBSLS
220-240
1.93
430
≥ 0.98
80
65
NUMBER
65
WATTS
240
226
210
CASE LENGTH
240mm
(9.44")
CASE LENGTH
240mm (9.44")
CASE WIDTH
95mmCASE
(3.74")
WIDTH
95mm (3.74")
HEIGHT
MOUNTING LENGTH
26
6
40
95
26
6
40
95
240
226
210
MOUNTING WIDTH
WEIGHT
65mm (2.56")
40mm (1.57")
0.85kg (1.87lb)
HEIGHT 226mm (8.90")
MOUNTING LENGTH
MOUNTING WIDTH
65mm (2.56")
226mm (8.90")
40mm (1.57")
WEIGHT
0.85kg (1.8
11
LED DRIVERS & MODULES
Also, contact us for more information about our
latest LED Drivers and LED Modules.
Fulham Company Ltd. (Middle East)
LOB-2, No 127 P.O. Box 261051
Jebel Ali Free Zone, Dubai, United Arab
Emirates
Tel: +9714-8873577 Fax: +9714-8873599
[email protected]
Fulham Headquarters (USA)
12705 S. Van Ness Avenue
Hawthorne, CA 90250
Tel: (323) 599-5000
Fax: (323) 754-9060
[email protected]
www.fulham.com
Fulham (India) Pvt. Ltd.
343, Kaliandas Udyog Bhavan
Sadanand Tandel Marg,
Near Century Bazar
Prabhadevi, Mumbai - 400025
Tel: +91 22 66388775-9
[email protected]
[email protected]
Fulham (India) Pvt. Ltd.
Survey No. 26-3
Village Narhe
Taluka Haveli, District: Pune 411041
Tel: +91 20 24690703/4
Fax: +91 20 24690712
[email protected]
[email protected]
Fulham Company Ltd. (International)
Unit 6, 6/F, Kowloon Plaza
485 Castle Peak Road
Cheung Sha Wan, Kowloon
Hong Kong
Tel: +852-2314-4801
Fax: +852-2314-4186
[email protected]
Lighting...Global. Intelligent. Sustainable.
Fulham Company GmbH (Europe)
Karolinenstrasse 18
D-58507 Lüdenscheid
Germany
Handelsregister Iserlohn: HR B 6286
USt.-IdNr.: DE253959344
Fon: +49 2351 4327416
Fax: +49 2351 6567349
Mobile: +49 152-0-9838495
[email protected]
Fulham Electronic Co. Ltd.
(North China)
No. 9 Xingchang Road, Nanshaozhen
Changping Science Park
Beijing 102200
P.R. China
Tel : +86-10-6073-5858
Fax : +86-10-6073-3765
[email protected]
www.fulham.com