POP Avdel Speed Fastening Systems

Transcription

POP Avdel Speed Fastening Systems
Speed Fastening® Systems
Speed Fastening® Systems
Reduce Assembly Costs with the most effective
blind fastening technology.
Holding your world together®
Speed fasteners
High precision, system-compatible function, ease of operation and
quick processes are guaranteed because you can fasten continuously
from magazine or bowl fed fasteners and place up to 60 fasteners per
minute. For fast and reliable assembly processes.
Speed Fastening Systems can reduce assembly costs, shorten cycle times, increase productivity
and reduce rework and other quality costs. Speed Fastening Systems are well suited for use in
small, medium and large batch processes as well as continuous production lines.
Installation
For smaller batches, we offer a choice of power tools and simple assembly workstations. For
larger batches, multihead systems offer a cost effective solution. For continuous flow lines, we
have the technology to develop fully automated assembly systems.
Applications
Speed Fastening Systems can be used to assemble metal and plastics, composite material and
electronic components. With an average cycle time of less than two seconds, these systems
provide a fast installation from one side (blind).
Mission
Together with our customers, we develop blind fastening systems that simplify your
production process and improve the quality of your products. In every case, we not only see
ourselves as a provider of fasteners, tools and machines but as a development and system
partner with the objective of helping our customers improve their assembly performance.
-2-
www.StanleyEngineeredFastening.com
Table of Contents
Systems Range Overview
Speed Fastening® Systems
4
Range Overview
5
The Range of
Speed Fasteners
Specifying a Speed Fastening® System
6-7
Selection Guide
8 - 10
NeoSpeed®
11
Briv 12
®
Chobert®
13
Double Flush Chobert
14
®
Grovit® 15
Rivscrew®
16
Rivscrew® PL
17
Avtronic 18
®
Avsert® 19
Installation Equipment
Avlug®
20
Customised Designs
21
Installation Systems
22
Power Tools
23 - 24
Workstations
25 - 26
Data Sheets
Assembly Workstations
27
NeoSpeed®Fastener
28 - 33
Equipment
34 - 35
Briv Fastener
36 - 44
Equipment
60 - 62
Chobert 45 - 63
®
Fastener
®
Equipment
60 - 61, 63
Double Flush Chobert Fastener
57
Equipment
60 - 61, 63
®
Grovit
®
Fastener
58 - 59
Equipment
60 - 61, 63
Rivscrew 64 - 67
Fastener
®
Equipment
69 - 71
Rivscrew PL
68
®
Fastener
Equipment
Avtronic ®
Fastener
72 - 73
Equipment
Avsert ®
69 - 71
74 - 75
Fastener
76 - 77
Equipment
78
Avlug Fastener
79
Equipment
80 - 81
®
-3-
www.StanleyEngineeredFastening.com
®
Speed Fastening Systems
Speed Fastening is a unique assembly system designed for rapid and reliable fastening in medium and high
volume applications. Originally designed for the aviation industry, Speed Fastening Systems are now used by
many of the world’s foremost manufacturing companies in sectors as diverse as household goods, lighting,
electronic sub-assemblies, light metal fabrication and automotive. Speed fasteners are available in a wide range
of materials, finishes, lengths and diameters and are ideal for fastening metals, plastics, composites and
electronic components.
Speed fasteners are single piece fasteners which are either magazine fed or fed via a vibrating bowl to a wide
choice of installation equipment. This ranges from the ultra-lightweight 753 power tool to fully automated,
state of the art assembly systems.
Benefits of assembly
Increased manufacturing throughput
Improved joint quality
A Speed Fastening System can be fully optimised to give
Speed installation technology provides a consistent,
cycle times of less than two seconds. This rapid, blind
repeatable joint. What’s more, unlike threaded
sided process delivers a throughput up to four times
fasteners, there is no requirement for torque control –
greater than a traditional threaded or riveted solution.
no more problems of stripped holes or loose joints.
Reduced component handling
Improved joint performance
The fasteners are fed via a magazine or into a bowl
Once installed speed fasteners give excellent clamp up,
feeder. This eliminates the need for individual
shear and tension performance. They are also virtually
component handling, saves time and reduces the
immune from vibration loosening.
potential for operator injury.
Process flexibility
No component spillage
Speed Fastening Systems can be used for low volume,
Because the fasteners are captively held they will not
off-line batch or jobbing shop work through to flow
be dropped onto the floor or into the application. This
line processes. From hand held power tools to multi-
avoids wasted time and improves product quality while
headed modular workstations, we can design a Speed
improving the work environment.
Fastening System to suit your assembly requirements.
A wide variety of products in many industries are
No stem loss
assembled with these systems including automotive,
Traditional breakstem rivets all too often suffer from
electronics, domestic appliance and general industrial.
stem loss once installed. This can lead to application
rattle, electrical short circuits or worse.
Speed fasteners have no stems.
Time Analysis
140
Speed Fastening is the
120
more efficient system
100
after only 10 placed
80
Time
rivets.
60
B re
40
ak
m
s te
Ri v
etin
ys t
gS
Sp
em
s
®
in g
a s te n
eed F
System
s
20
0
10
20
30
40
50
60
70
80
Placed Rivets
-4-
www.StanleyEngineeredFastening.com
Range Overview
Brand
Material
Key features
NeoSpeed®
Aluminium Alloy
Steel
Stainless Steel A4
Wide grip range
High joint clamp
Hole filling
Very high strength
Briv®
Aluminium Alloy
Steel
Stainless Steel A2
Brass
Bulbed tail form
Large headform
High joint clamp
Good joint gap closure
Rivscrew®
Steel
Threaded fastener
Removable with hex key and reusable
Fastens into materials up to
Vickers hardness 105 Hv5
Chobert®
Aluminium Alloy
Steel
Brass
Internal tapered bore
Controlled clamp
High shear
Ideal for soft and brittle materials
Double Flush Chobert®
Steel
Flush surface on both sides of the joint
Reduces excess space requirements
within the chassis
Grovit®
Aluminium Alloy
Steel
Designed for blind hole applications
Annular grooves on body
For use in wood, plastics, fibreglass and
aluminium
Avtronic®
Brass
Aluminium Alloy
Attaches DIN 41612 connectors
and other components to PCBs
Annular grooves on body
Avsert®
Brass
Threaded stand-off pillars for PCBs
Internally threaded bore
Many stand-off heights
Avlug®
Brass
Solderable terminal posts for PCBs
Rolled/knurled shank
Assembly with standard tool
Fasteners fed via a vibrating bowl
-5-
Magazine fed fasteners
www.StanleyEngineeredFastening.com
Specifying a Speed Fastening
®
System
To optimise the performance of your Speed Fastening System, it is important to select the correct combination of
fastener, nose equipment, mandrel and follower spring. It is also critical to ensure that the combination selected is
suited for use with your choice of installation process. If you need any help in specifying the required components,
do not hesitate to contact your local STANLEY Engineered Fastening representative. Further information on
corrosion, safety and RoHS can be found on our website www.StanleyEngineeredFastening.com.
Fastener Selection
Standard Fasteners
Specialist Fasteners
Removability
Avtronic®
Rivscrew® fasteners are
Designed for attaching
Speed fasteners are
ideal for applications
DIN and other connectors,
available in Stainless
requiring disassembly for
card ejectors and heatsinks
Steel, Steel, Aluminium
repair or rework. They
to printed circuit boards.
and Brass. The choice
can simply be unscrewed
Fastener Material &
Surface Finish
of material should be
using a standard
Avsert®
made on the basis of
hexagonal allen key.
Cost effective stand-off
performance (shear
pillars for printed circuit
and tensile strength),
boards.
Clamp
Briv® fasteners should be
suitability for use with
the parent material and
specified in applications
Avlug®
corrosion resistance. For
requiring high clamp
Cost effective terminal
performance data please
loads. NeoSpeed
posts for printed circuit
see the relevant technical
boards.
data sheets.
®
fasteners combine high
clamp throughout a wide
grip range. Chobert®
fasteners provide a
lighter, controlled clamp
making them ideal for
softer or low strength
materials.
Head Style
Fasteners are available
with dome head.
NeoSpeed®, Briv®
and Chobert® are
also available with
countersunk head style.
Other head diameters
may also be available as
specials – please contact
your local STANLEY
Engineered Fastening
representative.
-6-
www.StanleyEngineeredFastening.com
Typical placing sequence
1.
2.
1. The mandrel with pre-loaded
fastener is located in the hole.
3.
2. Tool activation pulls the
mandrel through the fastener,
expanding it within the hole to
provide high clamp and secure
joints.
3. At the end of the installation
cycle, the next fastener is automatically delivered to the nose
of the tool, ready to repeat the
assembly process.
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
The surface finishes for our speed fasteners are as follows:
Steel
Zinc plate and clear passivation
Option:
Epoxy paint
Zinc-nickel (with clear or black passivation)
Organic coatings
Aluminium Alloy
Natural
Option:
Anodising (clear or colour dyed)
Epoxy paint
Stainless Steel
Passivated
Brass
Brightened
Tin plated (for solderability)
Almost all our fastener families may be specified with alternative surface finishes to provide
increased corrosion resistance or a specific colour to suit your special application.
-7-
www.StanleyEngineeredFastening.com
Speed Fastening® Systems
START
No
Do you require a Threaded
Stand-off Pillar?
Is removability required?
Yes
Avsert®
Sizes ø:
M2.5 and M3 threads
Material:
Tin plated Brass
No
Is high clamp required in
assembly?
Yes
Yes
Is wide grip range required?
No
Yes
No
NeoSpeed®
Sizes ø:
3.2 - 4.8 mm (1/8"-3/16")
Materials:
Aluminium, Steel,
Stainless Steel A4
Head Styles:
Mushroom, Countersunk
Is the fastener going into a
blind hole?
No
Are you attaching electrical
connectors to PCB?
Yes
Yes
Grovit®
Avtronic®
Sizes ø:
2.4 - 4.8 mm (3/32"-3/16")
Materials:
Aluminium, Steel
Head Style:
Dome, Countersunk
Sizes ø:
2.5 and 2.8 mm
Materials:
Electro tin plated Brass,
Aluminium
Head Style:
Dome
-8-
www.StanleyEngineeredFastening.com
No
This selection guide is designed to illustrate which fasteners may be the most suitable for your
application. This guide does not include the full range of POP Avdel products; our Applications
Engineers are available to advise as to the best solution for your specific application needs.
Is the rear sheet thermoplastic?
Yes
No
Rivscrew® PL
Is solderability required?
Briv®
No
Yes
Sizes ø:
2.4 - 6.0 mm (3/32"-.236")
Materials:
Aluminium, Steel,
Stainless Steel A2
Head Styles:
Dome, Countersunk
Rivscrew®
Rivscrew®
Do you require a terminal post?
Sizes ø:
2.8 - 4.8 mm
Material:
Steel
Head Style:
Dome
Sizes ø:
3.0 - 4.5 mm
Material:
Steel
Head Style:
Dome
Sizes ø:
2.8 - 4.0 mm
Material:
Tin plated Steel
(optional)
Head Style:
Dome
Do you require a flush appearance
on both sides of the application?
No
Yes
Yes
No
Avlug®
Double Flush
Chobert®
Chobert®
Sizes ø:
1.6 - 3.2 mm (1/16"-1/8")
Material:
Electro tin plated Brass
Head Style:
Dome
Size ø:
3.2 mm (1/8")
Material:
Steel
Head Style:
Countersunk
-9-
Sizes ø:
2.4 - 6.4 mm (3/32"-1/4")
Materials:
Aluminium, Steel, Brass
Head Styles:
Dome, Low Profile,
Countersunk
www.StanleyEngineeredFastening.com
Selection Guide
This table is designed as a guide to help you select the most suitable speed fastener for your particular application. Full technical
and performance data for each speed fastener can also be found on our website or contact your local representative.
Chobert®
Double Flush Chobert®
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
• •
Series
6.4 mm (1/4")
4.8 mm (3/16")
4.0 mm (5/32")
28
30
32
33
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
1801
1802
1804
1821
1822
1831
1833
1841
1861
1121
1122
1124
1125
1131
1132
1135
1136
1141
1142
1143
1144
1147
1148
1162
1164
1110
1101
1103
1104
1722
1723
1733
1772
1742
12
12
12
12
12
12
12
12
12
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
14
15
15
15
16
16
16
16
17
36
38
36
39
41
42
42
44
36
45
47
51
49
49
51
49
51
53
53
53
53
53
53
55
56
57
58
59
59
64
64
66
67
68
1188
18 72
1189
18 73
1117
19
1118
19 77
1107
20 79
•
•
•
• •
• •
• •
• • •
M3
11
11
11
11
M2.5
57101
57121
57141
57221
6.0 mm
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
• •
• •
•
• •
- 10 -
•
Page
•
•
•
4.5 mm
3.5 mm
3.2 mm (1/8")
3.0 mm
2.8 mm
•
•
•
•
•
2.5 mm
2.4 mm (3/32")
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.6 mm (1/16")
•
• •
•
•
Fastener Size (nom)
•
•
•
•
Counter­sunk
Low profile
Dome
Anodysed red
Nickel plated
Passivated
Tin plated
•
•
•
•
•
•
•
•
•
Polished/bright
Zinc plated
•
•
•
•
•
•
•
•
•
Natural
Brass
Stainless Steel
•
•
•
•
Rivscrew®
Rivscrew® PL
Grovit®
•
•
•
•
•
•
Avlug® Avsert® Avtronic®
•
•
•
•
•
•
•
Head
Style
Data Sheet
Briv®
•
•
•
•
Finish
Description
NeoSpeed®
•
Steel
Aluminium 5 % Mg
Aluminium 3.5 % Mg
Material
Aluminium 2.5 % Mg
Product
Range
76
www.StanleyEngineeredFastening.com
®
NeoSpeed
Wide Grip Range
Speed fasteners with a unique splined rivet design
combine high clamp throughout a wide grip range
- simply the strongest, most versatile speed riveting
system in the world.
Key features and benefits
• The NeoSpeed fastening process delivers a through-
• 3x greater hole size tolerance than standard
put up to four times greater than traditional threaded
or breakstem fasteners
breakstem rivets
• Far less sensitive to application variations
• Multi-grip capability accommodates wide variations in
• Easier specification due to one-rivet x one mandrel
material thickness
solution
• One rivet can be used to replace several standard grip
• Typically half the installed weight versus an equivalent
fasteners
breakstem rivet
• External splines fill rear sheet and oversize front sheet
• Supply options: paper magazine of fasteners or pre-
holes
Specifications
Sizes:
3.2 mm to 4.8 mm
loaded disposable mandrel (Cartridge)
Typical placing sequence
1.
2.
3.
(1/8" to 3/16")
Materials:
Aluminium Alloy, Steel,
Stainless Steel A4
Head Styles:
Mushroom , Countersunk
Avdel Patent protected.
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• Automotive
Airbags
Interior
Seat & trim
Rapid action door
Computer cabinet
Solar panel
• Electronics
• Domestic appliances
• Electrical equipment
• General light fabrication
Heating
- 11 -
www.StanleyEngineeredFastening.com
®
Briv
High Shear, High Clamp Fasteners
Speed fasteners with a bulbed tail provide consistent
high clamp and shear. Can be used to assemble many
materials including metal, plastic and aluminium alloy.
Key features and benefits
• Bulbed tail and foreshortening of the fastener during
installation ensures high clamp
• Lower in-place costs than welding or nail rivets
• Bright tin plated brass option for ease of soldering
• Bulbed tail and large head style provide a large
and good electrical conductivity
bearing area for soft materials
• Stainless steel option for applications subject to
• Tapered tail for ease of hole entry
high temperature or corrosion
• Expands radially during installation to ensure
• Can be bowl fed for larger volume applications using
maximum hole fill
Specifications
Sizes:
2.4 mm (3/32") to 6 mm
automated equipment
Typical placing sequence
1.
2.
3.
Materials:
Aluminium Alloy, Steel,
Stainless Steel A2, Brass
Head Styles:
Dome, Countersunk
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• Automotive
Vacuum pump for diesel engines
Domestic heating systems
Office furniture
Computer cabinet
Automotive plastic connector
to moulded chassis
Automotive stereo speaker
• Electronic components
• Sheet metal
• Electrical engineering
• Domestic appliances
• Furniture
• General light fabrication
- 12 -
www.StanleyEngineeredFastening.com
®
Chobert
For Soft and Brittle Materials
Speed fasteners which provide consistent
controlled clamp, ideal for soft or brittle materials.
Key features and benefits
• Internally tapered bore ensures consistent light
• Bright tin plated brass option for ease of soldering
clamp to reduce potential damage to materials
• Expands radially during installation to ensure
and good electrical conductivity
• Can be bowl fed for larger volume applications
maximum hole fill
using automated equipment
• Lower in-place costs than welding or nail rivets
• Ideal pivot pin or hose tail
Specifications
Sizes:
2.4 mm to 6.4 mm
Typical placing sequence
1.
2.
3.
(3/32" to 1/4")
Materials:
Aluminium Alloy,
Steel and Brass
Head Styles:
Dome, Low Profile,
Countersunk
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• Automotive
Window hinge
Alloy tube with nylon bush
Computer rack glass door hinge
Housing for car alarm
Composite material latch for
wheel cover
Cooler
• Electronic components
• Sheet metal
• Electrical engineering
• Injection moulded
components
• Switchgear
• Domestic appliances
• General sheet metal
• General light fabrication
- 13 -
www.StanleyEngineeredFastening.com
®
Double Flush Chobert
Speed Fastening® rivet with countersunk head for use in
exceptionally thin sheet materials. Based on the Chobert
design, it is an ideal solution for fastening in the
electronics industry and other applications where rear
protrusion and rivet stem loosening are undesirable.
Key features and benefits
• Flush surface on both sides of the joint*
• Provides superior joint strength when compared to
• Reduces excess space requirements within the chassis
• Common hole form can be used throughout the
competitive technologies
• One-piece fastener eliminates potential stem fall out
chassis design to reduce complexity
• Expands radially in the material during installation
that can cause electrical problems
* Rear sheet tail protrusion of installed fastener up to 0.5 mm is
• Can be installed from either direction if accessible
Specifications
Size:
3.2 mm (1/8")
permissible
Typical placing sequence
1.
2.
3.
Material:
Steel
Head Style:
Countersunk
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• Computer chassis
Computer chassis
Gas firing
• Electronic devices and
components
• Automotive applications
• Domestic appliances
• HVAC
• General thin sheet fabrications where material
cost and blindside space
is at a premium
- 14 -
www.StanleyEngineeredFastening.com
®
Grovit
For Blind Hole Applications
Designed for blind hole applications in wood, plastics,
fibre- glass and aluminium. Can also be used in harder
substrates.
Key features and benefits
• Annular grooves on the body expand radially
• Provide a vibration resistant joint and increased
during installation
Specifications
Sizes:
2.4 mm to 4.8 mm
pull-out resistance
Typical placing sequence
1.
2.
3.
(3/32" to 3/16")
Materials:
Zinc plated Steel and
Aluminium Alloy
Head Style:
Dome, Countersunk
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• Automotive
Grovit® fastener in timber
Trouser press
Trouser press (detail)
PVC connector block in air
conditioning unit
Grovit® fastener used as a quick
connect low pressure bleed hose
PVC strip connector
• Domestic appliances
• Electrical equipment
• Injection moulded
components
- 15 -
www.StanleyEngineeredFastening.com
®
Rivscrew
Threaded, Removable Fasteners
Threaded, removable speed fasteners that combine
the speed of rivet placement with the removability of
a screw.
Key features and benefits
• Expands radially during installation to form a thread
• Can be used to fasten most materials up to Vickers
in host material, eliminating the risk of over torquing
and strip-out
hardness 105 Hv5
• Eliminates the need for costly tapping or thread-
• Placed using a hexagon mandrel which expands the
forming operations
threaded diameter radially, adjacent to its six corners
• Bright tin plated steel option for ease of soldering
• Removable for servicing with a hex key and reusable
• Providing a higher vibration resistant “thread lock”
and good electrical conductivity
• Can be bowl fed for larger volume applications using
in the parent material compared to standard screws
Specifications
Sizes:
2.8 mm to 4.8 mm
automated equipment
Typical placing sequence
1.
2.
3.
Materials:
Zinc plated steel
Optional: tin plated
Head Style:
Dome*
*The placed head style depends
on the nose equipment used,
standard Rivscrew nose equipment gives a dome head style.
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• Aluminium die-cast
boxes
Rivscrew® is removable and
reusable
Automotive die-cast chassis
with PCB
Heatsinks to processor cartridges
Alternator diode plate to nylon
moulding
Semi-conductors to heatsinks
and printed circuit boards
Seat belt tensioner
• Cast magnesium
• Semi-conductors to
thin wall and extruded
heatsinks
• Semi-conductors to PCBs
• PCBs to chassis
assemblies
• Fastening into injection
moulded plastic bosses
• General engineering
involving plastics, nylon,
polycarbonate etc.
- 16 -
www.StanleyEngineeredFastening.com
®
Rivscrew PL For Plastics
Threaded, removable speed fasteners that combine
the speed of rivet placement with the removability of
a screw.
Key features and benefits
Rivscrew PL fasteners have the same features and benefits as the standard Rivscrew fastener plus:
• Especially designed for soft and hard plastics
• Wide grip range from 3.0 to 11.8 mm covered by
• Special thread design for a wide range of plastics
one fastener
with a flexural modulus between 340,000 and
1,400,000 p.s.i (2,000 to 10,000 N/mm²)
Specifications
Sizes:
3.0 mm to 4.5 mm
Typical placing sequence
1.
2.
3.
Material:
Zinc plated steel
Head Style:
Dome
Avdel Patent Protected
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• Automotive components
Removable and reusable
Electric components
Head lamps
Printer & copiers
Dust cleaner
Fender attachment
• Lighting
• Plastic trim
• Home electronics
• Domestic appliances
• Toys
• Plastic enclosures
- 17 -
www.StanleyEngineeredFastening.com
®
Avtronic
For Attaching Connectors to PCBs
Initially designed to attach DIN 41612 connectors to
PCBs but can also be used to attach a wide range of
other connectors and components.
Key features and benefits
• Annular grooves on the body expand radially during
• Various body lengths provide a wide grip range to
installation
accommodate most combinations of connector and
• Provide a vibration resistant joint, increased pull-out
resistance and good residual clamp
PC board thickness
• Ideal tack rivet
• Can be used in blind hole applications
Specifications
Sizes:
2.5 mm and 2.8 mm
Typical placing sequence
1.
2.
3.
Materials:
Electro tin plated Brass
and Aluminium Alloy
Head Style:
Dome
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• DIN and other connectors
• Heatsinks
Surface mounted connectors
to PCBs
Electronic component
atttachment
Automotive vertical mounted
connectors
Traffic light reflector and
contact point
DIN 41612 male edge connector
• Card ejectors
• Brackets and stiffener
bars
- 18 -
www.StanleyEngineeredFastening.com
®
Avsert
Threaded Stand-off Pillars for PCBs
Threaded stand-off pillars for PCBs in a range of metric
internal threads and many stand-off heights.
Key features and benefits
• Internally threaded bore takes a threaded part e.g.
• Can be used for board thicknesses of 0.8 – 2.0 mm
D-subminiature connectors
(short spigot) or 0.8 –2.4 mm max (long spigot).
• Available in many stand-off heights to accommodate
• Suitable as a female mating bush for D-subminiature
a wide variety of components
Specifications
Sizes:
M2.5 x 0.45 and
connectors
Typical placing sequence
1.
2.
3.
M3 x 0.5 threads
Materials:
Tin plated Brass
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• Aluminium geartrays
and extrusions
Stand-off pillar
• D-connectors
• PCBs
• Telecommunications
equipment
DB25 subminiature connector
4.40 UNC female
Female mounting bush
- 19 -
www.StanleyEngineeredFastening.com
®
Avlug
Solderable Terminal Posts
Secure, easy-to-solder terminal posts for PCBs.
Key features and benefits
• Rolled/knurled shank ensures secure placement in
• Available with diameters as small as 1.6 mm for
the PCB
assembly of smaller components
• Suitable for wire wrapping or a test point for
CRO tubes
Specifications
Sizes:
1.6 mm to 3.2 mm
Typical placing sequence
1.
2.
3.
(1/16" – 1/8")
Material:
Electro tin plated Brass
Head Style:
Dome
Please visit our website www.StanleyEngineeredFastening.com for fastener placing animations.
Assembly applications
• Terminal posts
Terminal post - wire wrap
• Wire wrap
- 20 -
www.StanleyEngineeredFastening.com
Customised Designs
As you would expect from a leader in fastening solutions, we can design and manufacture Speed Fasteners with
a wide variety of forms and finishes to meet your unique assembly requirements. Shown below are just a few
examples of our customised capabilities. Whether you require custom fastener geometry, a particular finish,
different fastener material, limited access tooling, or anything else not offered as standard product, please
contact us to discuss your special requirements.
NeoSpeed® Speed Fastener - Black Anodised Finish
- Aluminium, black anodised
- More wear & corrosive resistant part
Briv® Speed Fastener - Customer specific painted finish
- Aluminium
- Custom painted finish
Briv® Speed Fastener - Anodised to Customer Colour & Head Marking
- Aluminium - blue anodised
- Customer logo on part for tamper resistance
Chobert® Speed Fastener - Stand-off Rivet
- Aluminium, natural
- Very large flange shouldered stand-off rivet
Speed Fasteners - Hose Barb
- Aluminium, natural
- For use on compressed air tubes
Avplas® Speed Fastener - Removable
- Aluminium, natural
- Removable fastener for plastics
Avlug® Miniature Speed Fastener - Solderable Terminal Post
- Brass, Tin plated
- Solderable Terminal Posts
- Diameter 1.6 mm (1/16")
Miniature Speed Fastener
- Aluminium, natural
- For use in electronic applications
- Diameters 1.6 - 2.0 mm (1/16" - .078")
- 21 -
www.StanleyEngineeredFastening.com
Installation Systems
From cost-effective power tools to custom assembly systems, Speed Fastening® equipment offers rapid and
reliable assembly to meet your specific requirements. The equipment is an integral part of the Speed Fastening
System and offers the following benefits:
•High speed, reliable fastener feed
•Quick reload
•Assembly cycle times within two seconds
•Low maintenance costs
•Single side assembly
•Ideal for low volume batch work through
•Simple operation
to fully automated assembly lines
Power Tools
For low volume production
Power tools
753 Standard tool
7537 Power tool
Workstations
7535 Pantograph workstation
Mini-MAS
Twin head fixed pitch
workstation
23 placing heads to assemble a
computer chassis
up to 500,000 fastener p.a.
Workstations
For medium volume
production from 250,000
up to 1,000,000 fastener
p.a.
Assembly Workstations
For high volume
production > 1,000,000
Bespoke systems
fastener p.a.
- 22 -
www.StanleyEngineeredFastening.com
Power Tools
7530 Power Tool
High performance, hydro-pneumatic power tool in heavy duty plastic, designed for rapid, blind side installation
of speed fasteners. The intensifier is separated from the power tool. One tool places all speed fasteners except
ø 1.6 mm (1/16") Avlug®. For ø 1.6 mm Avlug use the 7536 power tool.
•Average cycle time of less than 2 seconds to increase
•Available with in-line handle or bottom hose
productivity – up to 1500 fasteners per hour
configuration
•High capacity, magazine fed fasteners reduces
•Low maintenance handtool maximises productive
component handling and subsequent spillage
time – no requirement for specialist maintenance
•Robust & durable construction makes it suitable
for most industrial environments
training
•Long life, self priming intensifier provides consistent
•Lightweight construction (split handtool and
intensifier) and low actuation recoil reduces
actuation and hence joint formation
•Long reach barrel for use in many difficult access
operator fatigue
753 Standard tool
applications
Suspended
7536
Autoload
A suspended version is available that can be supported on a balancer to be quickly and easily moved or discarded
– reducing downtime and operator fatigue.
The Autoload system is ideal for high volume production > 5,000,000 fasteners per year. Autoload provides bowl
fed fasteners to minimise reloading downtime and maximise productivity. The fasteners are automatically loaded onto the mandrel. When fasteners on one mandrel are spent, the tool is placed in the nest, and the system
inserts a fully-loaded replacement into the modified 753 tool. The system features an operator interface board
that displays real-time reports on machine cycles and fault diagnostics. The data also can be linked to a network
allowing off-site monitoring and maintenance.
- 23 -
www.StanleyEngineeredFastening.com
Power Tools
7537 Power Tool
Lightweight, hydro-pneumatic power tool with integrated intensifier places all speed fasteners except ø 1.6 mm
(1/16") Avlug® fastener.
•Average cycle time of approx. 1 second increases
•Can place the same range of fasteners and uses
productivity
•No need for long umbilical makes it flexible to use
in different production environment
the same nose equipment as 7530 powertool
•Ease of maintenance due to integral cycle counter
•Patent Protected features
•Specially toughened plastic body and heavy duty
rubber base increase the impact resistance and
durability
7537
- 24 -
www.StanleyEngineeredFastening.com
Workstations Single-head
These single-head workstations can place the entire range of Speed Fastening® Systems and stand out for their
ergonomic design. Rapid assembly makes them cost-effective, even with small batch sizes. Simple to operate,
high mobility and easy integration into the production process are the main features. Time-consuming training
of an operator is not necessary. The hydraulic riveting units provide a smooth and shock-free riveting, ideal for
sensitive components. All tools only require compressed-air supply.
Pantograph Workstation
•Tool supported on an extendable arm
•The arm can be moved around the worktop to make
•Wide arm reach to over 0.8 m
space for other tasks
•Single hand operation
•Intensifier can be bench or floor mounted
Fixed Arm Workstation
•Tool supported on a fixed arm
•Height adjustable arm to meet the operator’s precise
•Foot pedal control, leaving both hands free to
ergonomic needs
position the workpiece
•Easy alignment of workpiece
Underbench Workstation
•Cost-effective workstation, requiring minimum space
•Easy alignment and precision assembly of small
•Mounted below the worktop leaving a free work
components
surface
•Integral safety guard
•Foot pedal control, leaving both hands free to
position the workpiece
70510 Underbench workstation
70510 Underbench workstation
7535 Pantograph workstation
- 25 -
7535 Fixed arm workstation
www.StanleyEngineeredFastening.com
Workstations Multi-head
Mini-MAS
The Mini-MAS is a twin-head assembly station for fast, parallel assembly with compact and ergonomic design
making it very easy to integrate into existing assembly lines.
•Double-head parallel riveting optimizes your assembly
and increases the quality of the joining
•Suitable for many applications
•Hydraulic riveting modules provide smooth and
•The rivets are presented in pairs and provide practical
jig points for your components
shock-free riveting
•Activation by a foot pedal, leaving the hands free
•Possible linear positioning of one riveting module
for component handling
provides progressive adjustment of the riveting pitch
•Seated workstation (stand version optional available)
from 29 mm up to 120 mm (close pitch version 17 mm
•ESD construction as an option
– 108 mm)
Mini-MAS
Standard nose equipment
Close pitch version
Multi-head Assembly Workstations
Multi-head assembly workstations are designed for the synchronous placement of multiple fasteners. Systems
can be simple fixed, two head workstations or complex systems where as many as 60 fasteners can be placed at
the same time. Most multi headed systems are customised to some extent which means that the user can enjoy
the benefits of an assembly solution designed to their own specific requirements.
•Synchronous fastener placement maximises
•Diagnostics capability improves quality control;
preventive maintenance regimes can be implemented
productivity and throughput
•In built fixturing reduces assembly time
•These workstations can be readily integrated into
existing production facilities
•Modular assembly technology reduces maintenance
costs
- 26 -
www.StanleyEngineeredFastening.com
Assembly Workstations
Automated Assembly Systems
Automated assembly systems are designed for integration within production lines and offer a complete operator
free assembly solution for highest levels of productivity.
•Bowl fed fasteners for continuous fastening
•Modular design with simple equipment access for
•In line integration
simple maintenance processes
•Diagnostic capability through operator interface
MIRS System to assemble vacuum pump
PMP System
29 placing heads to assemble computer chassis
10 placing heads to assemble automotive sealing strips
- 27 -
www.StanleyEngineeredFastening.com
NeoSpeed® 57101 Series
Aluminium
English
Français
Deutsch
Italiano
Español
Mushroom head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Aluminium Alloy*
(5% Mg)
Natural
Alliage d'aluminium*
(5% Mg)
Brut
Aluminium*
(5% Mg)
Blank
Lega di alluminio*
(5% Mg)
Nessuna finitura
Aluminio*
(5% Mg)
Natural
* : BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555
D
L
øB
øA
Front sheet
ø
nom.
3.2
(1/8")
4.0
(5/32")
4.8
(3/16")
min.
max.
0.4
2.0
0.4
4.5
0.4
8.6
0.5
2.2
0.5
5.0
0.5
9.1
0.6
2.4
0.6
5.2
0.6
9.2
Rear sheet
Front sheet
Rear sheet
Pièce avant /
oberes Bauteil /
lamiera
anteriore /
pieza delantera
Pièce arriere /
unteres Bauteil /
lamiera
posteriore /
pieza trasera
Fasteners
per pod
øB
D
L
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
øA
min.
max.
min.
max.
max. max. max. max.
3.35
3.62
3.26
3.42
6.53 1.10
kN1)
kN1)
0.76
1.25
4.8
7.3 3.17
11.5
5.4
4.10
4.43
3.97
4.18
8.18 1.25
8.0 3.90
1.19
1.90
11.7
5.8
5.00
5.40
4.85
5.10
9.71 1.50
8.9 4.79
12.7
1.66
2.90
Part No/ref
±1
52
57101-03204
37
57101-03207
24
57101-03211
47
57101-04005
33
57101-04007
23
57101-04011
44
57101-04805
30
57101-04808
22
57101-04812
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 28 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
NeoSpeed® 57101 "Cartridge" Series
Aluminium
NeoSpeed® "Cartridge":
Pre-loaded disposable mandrel / Aiguille pré-chargée jetable / Vormagaziniert auf Einwegdorn / Precaricato su mandrino monouso /
Mandril desechable precargado
Plastic follower (disposable) / Manchette plastique (jetable) / Kunststoffmanschette (Einweg) /
Manicotto sintetico (monouso) / Manguito plástico (desechable)
NeoSpeed rivets (details below) / Rivets NeoSpeed (détails cf. cidessous)/ NeoSpeed Niete (Details s. unten) / Rivetti NeoSpoeed
(dettàgli vedi sotto)/ Remaches NeoSpeed (detalles véase abajo)
Steel mandrel (disposable) /
Aiguille acier (jetable) /
Einwegdorn aus Stahl /
Mandrino acciaio (monouso) /
Mandril acero (desechable)
NeoSpeed® Rivets:
English
Français
Deutsch
Italiano
Español
Mushroom head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Aluminium Alloy*
(5% Mg)
Natural
Alliage d'aluminium*
(5% Mg)
Brut
Aluminium*
(5% Mg)
Blank
Lega di alluminio*
(5% Mg)
Nessuna finitura
Aluminio*
(5% Mg)
Natural
* : BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555
D
L
øB
øA
Front sheet
ø
nom.
3.2
(1/8")
4.0
(5/32")
4.8
(3/16")
min.
max.
0.4
2.0
0.4
4.5
Rear sheet
Front sheet /
Rear sheet /
Pièce avant /
oberes Bauteil /
lamiera
anteriore /
pieza delantera
Pièce arriere /
unteres Bauteil /
lamiera
posteriore /
pieza trasera
min.
max.
min.
max.
Fasteners
per
cartridge /
øB
D
L
Nombre de
rivets par
aiguille /
Niete pro
Dorn /
Rivetti per
mandrino /
Uds./mandril
øA
max. max. max. max.
kN1)
kN1)
4.8
3.35
3.62
3.26
3.42
6.53 1.10
7.3 3.17
0.76
1.25
Cartridge
Part No/ref
±1
52
57101-13204
37
57101-13207
0.4
8.6
11.5
24
57101-13211
0.5
2.2
5.4
47
57101-14005
0.5
5.0
33
57101-14007
4.10
4.43
3.97
4.18
8.18 1.25
8.0 3.90
1.19
1.90
0.5
9.1
11.7
23
57101-14011
0.6
2.4
5.8
44
57101-14805
0.6
5.2
31
57101-14808
0.6
9.2
22
57101-14812
5.00
5.40
4.85
5.10
9.71 1.50
8.9 4.79
12.7
1.66
2.90
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 29 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
NeoSpeed® 57121 Series
Steel
English
Français
Deutsch
Italiano
Español
Mushroom head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Steel*
Zinc plated
Clear trivalent
passivated
Acier*
Revêtement zingué
Passivation claire
trivalente
Stahl*
Verzinkt
Klar chromatiert,
Cr6-frei
Acciaio*
Zincato
Passivazione chiara
trivalente
Acero*
Zincado
Pasivado claro trivalente
* : EN 10263-2 C8C SAE 1008 DIN 1654 QSt34-3
D
L
øB
øA
Front sheet
Front sheet
3.2
(1/8")
4.0
(5/32")
4.8
(3/16")
min.
max.
0.4
2.0
0.4
4.5
min.
max.
Fasteners
per pod
Rear sheet
Pièce avant /
Pièce arriere /
oberes Bauteil / unteres Bauteil /
lamiera
lamiera
anteriore /
posteriore /
pieza delantera
pieza trasera
ø
nom.
Rear sheet
min.
max.
øB
D
L
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
øA
max. max. max. max.
kN1)
kN1)
4.8
3.35
3.62
3.26
3.42
6.53 1.10
7.3 3.17
0.4
8.6
11.5
0.5
2.2
5.4
0.5
5.0
4.10
4.43
3.97
4.18
8.18 1.25
8.0 3.90
0.5
9.1
11.7
0.6
2.4
5.8
0.6
5.2
0.6
9.2
5.00
5.40
4.85
5.10
9.71 1.50
8.9 4.79
12.7
1.16
1.80
2.00
2.60
1.87
3.00
2.80
4.20
Part No/ref
±1
52
57121-03204
37
57121-03207
24
57121-03211
47
57121-04005
33
57121-04007
23
57121-04011
44
57121-04805
30
57121-04808
22
57121-04812
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 30 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
NeoSpeed® 57121 "Cartridge" Series
Steel
NeoSpeed® "Cartridge":
Pre-loaded disposable mandrel / Aiguille pré-chargée jetable / Vormagaziniert auf Einwegdorn / Precaricato su mandrino monouso /
Mandril desechable precargado
Plastic follower (disposable) / Manchette plastique (jetable) / Kunststoffmanschette (Einweg) /
Manicotto sintetico (monouso) / Manguito plástico (desechable)
NeoSpeed rivets (details below) / Rivets NeoSpeed (détails cf. cidessous)/ NeoSpeed Niete (Details s. unten) / Rivetti NeoSpoeed
(dettàgli vedi sotto)/ Remaches NeoSpeed (detalles véase abajo)
Steel mandrel (disposable) /
Aiguille acier (jetable) /
Einwegdorn aus Stahl /
Mandrino acciaio (monouso) /
Mandril acero (desechable)
NeoSpeed® Rivets:
English
Français
Deutsch
Italiano
Español
Mushroom head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Steel*
Zinc plated
Clear trivalent
passivated
Acier*
Revêtement zingué
Passivation claire
trivalente
Stahl*
Verzinkt
Klar chromatiert,
Cr6-frei
Acciaio*
Zincato
Passivazione chiara
trivalente
Acero*
Zincado
Pasivado claro trivalente
* : EN 10263-2 C8C SAE 1008 DIN 1654 QSt34-3
D
L
øB
øA
Front sheet
ø
nom.
3.2
(1/8")
4.0
(5/32")
4.8
(3/16")
min.
max.
0.4
2.0
0.4
4.5
Rear sheet
Front sheet /
Rear sheet /
Pièce avant /
oberes Bauteil /
lamiera
anteriore /
pieza delantera
Pièce arriere /
unteres Bauteil /
lamiera
posteriore /
pieza trasera
Fasteners
per
cartridge /
øB
D
L
Nombre de
rivets par
aiguille /
Niete pro
Dorn /
Rivetti per
mandrino /
Uds./mandril
øA
min.
max.
min.
max.
max. max. max. max.
3.35
3.62
3.26
3.42
6.53 1.10
kN1)
kN1)
1.16
1.87
4.8
7.3 3.17
0.4
8.6
11.5
0.5
2.2
5.4
0.5
5.0
0.5
9.1
0.6
2.4
0.6
5.2
0.6
9.2
4.10
4.43
3.97
4.18
8.18 1.25
8.0 3.90
11.7
1.80
2.00
3.00
2.80
5.8
5.00
5.40
4.85
5.10
9.71 1.50
8.9 4.79
12.7
2.60
4.20
Cartridge
Part No/ref
±1
52
57121-13204
37
57121-13207
24
57121-13211
47
57121-14005
33
57121-14007
23
57121-14011
44
57121-14805
31
57121-14808
22
57121-14812
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 31 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
NeoSpeed® 57141 Series
Stainless Steel A4
English
Français
Deutsch
Italiano
Español
Mushroom head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
A4 Stainless Steel*
Passivated
A4 Inox*
Passivation
A4 Edelstahl*
Passiviert
A4 Acciaio inox*
Passivazione
A4 Acero inoxidable*
Pasivado
*: EN 10263-5 / X3CrNiCuMo17-11-3-2 / Werkstoff 1.4578 / AISI 316Cu
D
L
øB
øA
Front sheet
Front sheet
3.2
(1/8")
4.0
(5/32")
4.8
(3/16")
min.
max.
min.
max.
Fasteners
per pod
Rear sheet
Pièce avant /
Pièce arriere /
oberes Bauteil / unteres Bauteil /
lamiera
lamiera
anteriore /
posteriore /
pieza trasera
pieza delantera
ø
nom.
Rear sheet
min.
max.
øB
D
4.5
2.2
0.5
5.0
0.5
7.1
0.6
2.4
0.6
5.2
0.6
7.2
kN1)
kN1)
4.8
3.35
3.62
3.26
3.42
6.27 1.12
6.6
0.5
øA
max. max. max. max.
2.0
0.4
L
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
7.3 3.17
1.85
5.4
4.43
3.97
4.18
7.93 1.25
8.0 3.84
9.7
2.80
2.90
5.8
5.00
5.30
4.85
5.10
9.45 1.50
8.9 4.82
10.9
4.40
±1
52
57141-03204
37
57141-03207
29
57141-03209
4.30
47
57141-04005
4.00
33
57141-04007
3.90
28
57141-04009
6.50
44
57141-04805
5.90
30
57141-04808
5.80
25
57141-04810
2.75
9.5
4.10
Part No/ref
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 32 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
NeoSpeed® 57221 Series
Steel
English
Français
Deutsch
Italiano
Español
120° Countersunk head
120° Tête fraisée
120° Senkkopf
120° Testa svasata
120° Cabeza avellanada
Steel*
Zinc plated
Clear trivalent
passivated
Acier*
Revêtement zingué
Passivation claire
trivalente
Stahl*
Verzinkt
Klar chromatiert,
Cr6-frei
Acciaio*
Zincato
Passivazione chiara
trivalente
Acero*
Zincado
Pasivado claro trivalente
* : EN 10263-2 C8C SAE 1008 DIN 1654 QSt34-3
0.81 ref.
L
D
øB
øA
120°
ø5.9
- 6.2
Rear sheet
Front sheet1)
ø
nom.
3.2
(1/8")
min.
max.
Front sheet
Rear sheet
Pièce avant /
oberes Bauteil /
lamiera
anteriore /
pieza delantera
Pièce arriere /
unteres Bauteil /
lamiera
posteriore /
pieza trasera
min.
max.
min.
max.
Fasteners
per pod
øB
D
4.5
3.26
3.34
3.26
3.42
øA
max. nom. max. max.
2.0
1.0
L
5.84 0.80
8.6
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
Part No/ref
kN2)
kN2)
±1
4.8
0.94
1.92
64
57221-03204
7.3 3.17
1.15
1.76
42
57221-03207
1.15
1.68
27
57221-03211
11.5
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) Front sheet thickness must exceed the full depth of countersink. / L’épaisseur de la pièce recevant la tête fraisée doit être plus
importante que la profondeur de fraisage. / Die Materialstärke des oberen Bauteils muss die volle Tiefe der Senkung überschreiten. / Spessore della lamiera anteriore deve superare la profondità di svasatura. / El espesor de la pieza delantera debe
superar la profundidad de avellanado.
2) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 33 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
NeoSpeed® Nose Equipment
Ensembles de nez / Mundstücke / Equipaggiamento /
Equipos de colocación
STANDARD CAM OPERATED
STANDARD
'B'
'B'
31.8
1.25
28.6
1.125
'E'
34
1.34
'E'
33.5
1.32
'D'
'D'
TAPERED
RECESSED
Nose equipment with addition of a twist
cam to ease and speed up the nose jaw
opening thus the pod reloading procedure.
Ensembles de nez avec, en plus, une came
facilitant et accélérant l'ouverture du nez de
pose, et donc le rechargement en fixations.
Zum leichteren Magazinieren haben diese
Mundstücke durch einen Drehring zu
öffnende Mundstückschnäbel.
Equipaggiamento con l'aggiunta di una
camma per facilitare e rendere più veloce
l'apertura della testata e pertanto la procedura di ricarica dell'astuccio portarivetti.
Boquillas que incorporan una leva para
facilitar y hacer más rápida la apertura de la
boquilla y el procedimiento de carga.
HeadStyle
Nose Equipment
Nez de pose
Mundstück
Testata
Boquilla
Part No/ref
Standard cam operated
07530-03200
Countersunk2)
Standard
4.0 (5/32")
Mushroom1)
Standard cam operated
4.8 (3/16")
Mushroom
Standard cam operated
ø
nom.
3.2 (1/8")
Forme de tête
Kopfform
Forma della testa
Forma de cabeza
Applications with no or little access
restrictions.
Pour applications ne présentant que peu
ou pas de contraintes d'accès.
Für alle gut zugänglichen Nietpunkte.
Adatta per applicazioni senza restrizioni di
accesso o con restrizioni di accesso limitate.
Apta para aquellas aplicaciones sin ninguna
o pocas restricciones da acceso.
Mushroom1)
1)
Dimensions
Dimension / Abmessungen /
Dimensioni / Dimensiones
B
D
E
10.41
29.97
5.08
07170-03104
9.14
33.02
4.06
07530-03300
12.90
33.02
6.10
07530-03400
14.22
29.97
8.38
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1)
2)
Tête plate / Flachrundkopf / testa a fungo / cabeza alomada
Tête fraisée / Senkkopf / testa svasata / cabeza avellanada
- 34 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
NeoSpeed® Mandrel and Spring Information
Aiguilles et Ressorts d'aiguille / Nietdorne und -federn /
Mandrini e Molle / Mandriles y Muelles
Mandrel / Aiguille / Nietdorn /
Mandrino / Mandril
Spring / Ressort d'aiguille / Nietdornfeder /
Molla / Muelle
P
P
øH
øH
"V" cut
Mandrel for stainless steel NeoSpeed
Description
Material
ø
nom.
3.2 (1/8")
4.0 (5/32")
4.8 (3/16")
Mandrel1)
Part No/ref
Matériaux
Material
Materiale
Material
Description
Beschreibung
Descrizione
Descripción
øH
P
nom.
max.
Aluminium2), Steel3)
Standard
2.30
3.05
07530-06014
Stainless Steel
Aluminium2), Steel3)
Stainless Steel4)
Aluminium2), Steel3)
Stainless Steel4)
Standard
Standard
Standard
Standard
Standard
2.39
2.67
2.93
3.53
3.43
3.05
3.45
3.50
3.99
3.96
07530-06804
07530-06015
07530-06805
07530-06016
07530-06806
4)
Spring1)
Part No/ref
07150-06814
07170-06875
07170-06876
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) for use with paper magazine / pour utilisation avec chargeur papier / für Verarbeitung mit Papiermagazin / da usare con caricatori blister di carta / sólo para remaches en tiras de papel
2) Aluminium / Aluminium / Alluminio / Aluminio
3) Acier / Stahl / Acciaio / Acero
4) Inox / Edelstahl / Acciaio inox / Acero inoxidable
- 35 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® 1801/ (1804 / 1861) Series
Aluminium
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Aluminium alloy*
(5 % Mg)
Natural
Alliage d‘aluminium*
(5% Mg)
Brut
Aluminium*
(5 % Mg)
Blank
Lega di alluminio*
(5% Mg)
Nessuna finitura
Aluminio*
(5% Mg)
Natural
*: BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555
Optional on request / sur demande / auf Anfrage / su richiesta / bajo petición:
For anodized, dyed red replace part no. 01801 with 01804 / pour anodisé rouge remplacer la série 01801 par 01804 / für rot
eloxiert ersetzen Sie 01801 durch 01804 / per anodizzato rosso sostituire 01801 con 01804 / para anodizado rojo cambiar 01801
por 01804
For 2.5 % Mg aluminium alloy replace part no. 01801 with 01861 / pour 2.5 % Mg alliage d'aluminium remplacer la série 01801
par 01861 / für 2.5 % Mg Aluminium-Legierung ersetzen Sie 01801 durch 01861 / per 2.5 % Mg lega di alluminio sostituire 01801
con 01861 / para Aluminio (2,5 % de Mg) cambiar 01801 por 01861
D
L
øA
øB
Fasteners
per pod
ø
nom.
2.4
(3/32")
3.2
(1/8")
min.
D
L
øA
max.
max.
max.
max.
max.
1.14
2.42
3.98
64
01801-00304
2.15
3.43
5.00
52
01801-00306
3.17
4.45
6.02
44
01801-00308
4.19
5.47
7.04
38
01801-00310
5.20
6.48
34
01801-00312
6.22
7.50
9.07
30
01801-00314
6.73
8.00
9.57
28
01801-00315
7.24
8.51
10.08
27
01801-00316
7.75
9.02
10.59
26
01801-00317
0.64
1.91
3.86
59
01801-00403
1.14
2.42
4.37
58
01801-00404
1.65
2.87
4.87
50
01801-00405
2.15
3.43
5.39
48
01801-00406
3.17
4.45
42
01801-00408
4.19
5.47
7.42
37
01801-00410
5.20
6.48
8.44
33
01801-00412
6.22
7.50
9.45
29
01801-00414
7.24
8.51
10.46
26
01801-00416
3.26
2.44
3.34
4.11
6.53
0.89
0.99
8.05
6.41
2.35
3.14
kN1)
0.27
0.76
kN1)
Part No/ref
min.
2.36
max.
øB
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
0.44
1.31
±1
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 36 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® 1801 / (1804 / 1861) Series
Aluminium
D
L
øA
øB
Fasteners
per pod
ø
4.0
(5/32")
4.8
(3/16")
6.0
min.
D
L
øA
max.
max.
max.
max.
max.
1.57
2.93
4.91
52
01801-00505
2.15
3.43
5.41
49
01801-00506
2.66
3.94
5.92
44
01801-00507
3.68
4.96
39
01801-00509
4.69
5.97
34
01801-00511
5.71
6.99
8.97
31
01801-00513
6.73
8.00
9.98
26
01801-00515
7.75
9.02
11.00
24
01801-00517
1.65
3.30
5.39
46
01801-00606
2.03
3.94
6.10
42
01801-00607
3.68
5.21
7.37
35
01801-00609
4.95
6.48
31
01801-00611
6.22
7.75
27
01801-00613
4.85
4.04
4.93
8.18
9.71
0.99
1.17
6.94
7.95
8.64
9.91
3.88
4.77
kN1)
1.14
1.51
kN1)
Part No/ref
min.
3.97
max.
øB
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
1.74
2.74
±1
7.49
9.02
11.18
24
01801-00615
8.76
10.29
12.45
22
01801-00617
10.03
11.56
13.46
20
01801-00619
2.66
3.94
6.93
37
01801-06007
3.68
4.95
7.94
33
01801-06009
4.70
5.96
29
01801-06011
5.71
6.98
26
01801-06013
6.73
7.99
10.99
24
01801-06015
7.74
9.01
12.00
23
01801-06017
5.94
6.02
11.55
1.35
8.96
9.98
5.90
1.69
3.29
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 37 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® 1802 Series
Aluminium
English
Français
Deutsch
Italiano
Español
120° Countersunk
120° Tête fraisée
120° Senkkopf
120° Testa svasata
120° Cabeza avellanada
Aluminium alloy*
(5 % Mg)
Natural
Alliage d‘aluminium*
(5% Mg)
Brut
Aluminium*
(5 % Mg)
Blank
Lega di alluminio*
(5% Mg)
Nessuna finitura
Aluminio*
(5% Mg)
Natural
*: BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555
0.81
L
D
øA
øB
ø6.02/
5.72
120°
120°
ø3.34/3.26
Fasteners
per pod
ø
nom.
3.2
(1/8")
4,0
(5/32")
min.
D
L
øA
max.
max.
max.
max.
max.
1.52
2.79
4.77
64
01802-00406
2.54
3.81
5.79
52
01802-00407
3.56
4.83
44
01802-00408
4.57
5.84
7.82
38
01802-00410
5.59
6.86
8.84
33
01802-00411
1.57
2.93
5.18
59
01802-00505
2.15
3.43
5.69
54
01802-00506
2.66
3.94
49
01802-00507
3.68
4.96
42
01802-00509
4.69
5.97
8.22
36
01802-00511
5.71
6.99
9.24
32
01802-00513
3.97
3.34
4.04
5.84
6.98
0.76
1.02
6.81
6.19
7.21
3.17
3.90
kN1)
0.76
1.13
kN1)
Part No/ref
min.
3.26
max.
øB
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
1.31
1.73
±1
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 38 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® 1821 Series
Steel
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Low carbon steel*
Acier bas carbone*
Stahl*
Acciaio a basso tenore di Acero bajo en carbono*
carbonio*
Zincato
Zincado
Passivazione chiara
Pasivado claro trivalente
trivalente
Zinc plated
Revêtement zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
*: SAE 1008 / EN 10263-2 C8C (DIN 10263-2 C8C, Qst 34-3)
D
L
øA
øB
Fasteners
per pod
ø
nom.
3.2
(1/8")
4.0
(5/32")
min.
D
L
øA
max.
max.
max.
max.
max.
0.64
1.91
3.86
59
01821-00403
1.14
2.42
4.37
58
01821-00404
1.65
2.87
4.87
50
01821-00405
2.15
3.43
5.39
48
01821-00406
3.17
4.45
42
01821-00408
4.19
5.47
7.42
37
01821-00410
5.20
6.48
8.44
33
01821-00412
6.22
7.50
9.45
29
01821-00414
7.24
8.51
10.46
26
01821-00416
1.57
2.93
4.91
52
01821-00505
2.15
3.43
5.41
49
01821-00506
2.66
3.94
5.92
44
01821-00507
3.68
4.96
39
01821-00509
4.69
5.97
34
01821-00511
5.71
6.99
8.97
31
01821-00513
6.73
8.00
9.98
26
01821-00515
7.75
9.02
11.00
24
01821-00517
3.97
3.34
4.04
6.53
8.18
0.99
0.99
6.41
6.94
7.95
3.17
3.90
kN1)
1.13
1.65
kN1)
Part No/ref
min.
3.26
max.
øB
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
1.82
2.80
±1
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 39 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® 1821 Series
Steel
D
L
øA
øB
Fasteners
per pod
ø
4.8
(3/16")
6.0
min.
max.
øB
D
L
øA
max.
max.
max.
max.
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
kN1)
kN1)
Part No/ref
min.
max.
1.65
3.30
5.39
46
01821-00606
2.03
3.94
6.10
42
01821-00607
3.68
5.21
35
01821-00609
4.95
6.48
31
01821-00611
6.22
7.75
9.91
27
01821-00613
7.49
9.02
11.18
24
01821-00615
8.76
10.29
12.45
22
01821-00617
2.66
3.94
6.93
37
01821-06007
7.37
4.85
4.93
9.71
1.17
8.64
4.79
2.25
3.71
±1
3.68
4.95
7.94
33
01821-06009
4.70
5.96
8.96
29
01821-06011
5.71
6.98
26
01821-06013
6.73
7.99
10.99
24
01821-06015
7.74
9.01
12.00
23
01821-06017
5.94
6.02
11.55
1.35
9.98
5.93
2.58
4.22
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 40 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® 1822 Series
Steel
English
Français
Deutsch
Italiano
Español
120° Countersunk
120° Tête fraisée
120° Senkkopf
120° Testa svasata
120° Cabeza avellanada
Low carbon steel*
Acier bas carbone*
Stahl*
Acciaio a basso tenore di Acero bajo en carbono*
carbonio*
Zincato
Zincado
Passivazione chiara
Pasivado claro trivalente
trivalente
Zinc plated
Revêtement zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
*: SAE 1008 / EN 10263-2 C8C (DIN 10263-2 C8C, Qst 34-3)
0.81 (1822 series)
0.79 (specials)
L
D
øB
øA
120°
120°
ø6.02/
5.89
ø3.34/3.26
Fasteners
per pod
ø
nom.
3.2
(1/8")
4.0
(5/32")
min.
D
L
øA
max.
max.
max.
max.
max.
1.52
2.79
4.77
64
01822-00406
2.54
3.81
5.79
52
01822-00407
3.56
4.83
44
01822-00408
4.57
5.84
7.82
38
01822-00410
5.59
6.86
8.84
33
01822-00411
1.57
2.93
5.18
59
01822-00505
2.15
3.43
5.69
54
01822-00506
2.66
3.94
49
01822-00507
3.68
4.96
42
01822-00509
4.69
5.97
8.22
36
01822-00511
5.71
6.99
9.24
32
01822-00513
3.97
3.34
4.04
5.84
6.98
0.76
1.02
6.81
6.19
7.21
3.17
3.90
kN1)
0.95
1.65
kN1)
Part No/ref
min.
3.26
max.
øB
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
1.65
2.80
±1
Special Option: designed for thin sheet applications / Conçu pour des applications de faible épaisseur / für geringe Materialstärken /
Progettato per applicazioni in spessori sottili/ Diseñado para aplicaciones de chapa fina
3.2
(1/8")
1.27
2.29
1.45
1.70
3.26
3.34
5.84
0.74
4.32
0.69
4.19
3.17
0.95
1.65
72
01810-06480
72
01810-10375
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 41 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® 1833 / (1831) Series
Brass
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Brass*
Electro tin plated**
Laiton*
Kupfer-Zink Legierung* Ottone*
Etamage électrolytique** verzinnt**
Stagnato**
Latón*
Estañado electrolítico**
*: BS EN 12166 CW 508L DIN 17660 CuZn37
**: We recommend tin plated parts 1833 Series are installed within 9 months from the date they were produced.
Nous conseillons d’utiliser les pièces en laiton étamé du série 1833 sous un délai de 9 mois après la date de production.
Wir empfehlen, verzinnte Niete der Serie 1833 innerhalb 9 Monaten nach Produktionsdatum zu verarbeiten.
Raccomandare di utilizzare i prodotti stagnati serie 1833 entro 9 mesi a decorrere dalla data di fabbricazione.
Recomendamos utilizar sus piezas estañadas serie 1833 antes de 9 meses desde la fecha de su fabricación.
Optional on request / sur demande / auf Anfrage / su richiesta / bajo petición:
For brightened Brass finish replace 01833 with 01831 / Pour finition brillante remplacer la série 01833 par 01831 /
Für Oberfläche blank ersetzen Sie 01833 durch 01831 / Per finitura brillante sostituire 01833 con 01831 /
Para acabado brillante cambiar 01833 por 01831
D
L
øA
øB
Fasteners
per pod
ø
nom.
2.4
(3/32")
3.2
(1/8")
min.
D
L
øA
max.
max.
max.
max.
max.
1.14
2.42
3.99
64
01833-00304
2.15
3.43
5.01
52
01833-00306
3.17
4.45
6.02
44
01833-00308
4.19
5.47
7.04
38
01833-00310
5.20
6.48
34
01833-00312
6.22
7.50
9.07
30
01833-00314
6.73
8.00
9.57
28
01833-00315
7.24
8.51
10.08
27
01833-00316
2.44
4.11
0.89
8.06
2.35
kN1)
0.44
kN1)
Part No/ref
min.
2.36
max.
øB
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
0.89
±1
7.75
9.02
10.59
26
01833-00317
0.64
1.91
3.86
64
01833-00403
1.14
2.42
4.37
58
01833-00404
2.15
3.43
5.39
50
01833-00406
3.17
4.45
42
01833-00408
4.19
5.47
37
01833-00410
5.20
6.48
8.44
33
01833-00412
6.22
7.50
9.45
29
01833-00414
7.24
8.51
10.46
26
01833-00416
3.26
3.34
6.53
0.99
6.41
7.42
3.16
1.11
1.91
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 42 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® 1833 / (1831) Series
Brass
D
L
øA
øB
Fasteners
per pod
ø
nom.
4.0
(5/32")
4.8
(3/16")
min.
D
L
øA
max.
max.
max.
max.
max.
1.57
2.93
4.91
52
01833-00505
2.15
3.43
5.41
48
01833-00506
2.66
3.94
5.92
44
01833-00507
3.68
4.96
38
01833-00509
4.69
5.97
34
01833-00511
5.71
6.99
8.97
30
01833-00513
6.73
8.00
9.98
27
01833-00515
7.75
9.02
11.00
25
01833-00517
1.65
3.30
5.39
46
01833-00606
2.03
3.94
6.10
42
01833-00607
3.68
5.21
7.37
35
01833-00609
4.95
6.48
31
01833-00611
6.22
7.75
27
01833-00613
7.49
9.02
11.18
24
01833-00615
8.76 10.29
12.45
22
01833-00617
10.03 11.56
13.46
20
01833-00619
4.85
4.04
4.93
8.18
9.71
0.99
1.17
6.94
7.95
8.64
9.91
3.90
4.79
kN1)
1.87
2.31
kN1)
Part No/ref
min.
3.97
max.
øB
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
2.75
3.60
±1
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 43 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® 1841 Series
Stainless Steel A2
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
A2 Stainless Steel*
Polished
A2 Inox*
Poli
A2 Edelstahl*
Blank
A2 Acciaio inox*
Lucido
A2 Acero inoxidable*
Pulido
*: BS 3111 394S17 Werkstoff 1.4567
D
L
øA
øB
Fasteners
per pod
ø
nom.
3.2
(1/8")
4.0
(5/32")
4.8
(3/16")
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
øB
D
L
øA
max.
kN1)
kN1)
3.16
1.33
1.96
min.
max.
max.
max.
max.
3.26
3.34
6.53
0.99
5.39
Part No/ref
min.
max.
1.14
2.42
2.15
3.43
3.17
4.45
1.57
2.93
4.91
52
01841-00505
2.15
3.43
5.41
49
01841-00506
2.66
3.94
44
01841-00507
3.68
4.96
38
01841-00509
4.69
5.97
7.95
34
01841-00511
5.71
6.99
8.97
30
01841-00513
1.65
3.30
5.39
46
01841-00606
2.03
3.94
6.10
42
01841-00607
3.68
5.21
7.37
35
01841-00609
4.32
5.84
32
01841-00610
4.95
6.48
31
01841-00611
6.22
7.75
9.91
27
01841-00613
7.49
9.02
11.18
24
01841-00615
8.76
10.29
12.45
22
01841-00617
4.37
6.41
3.97
4.85
4.04
4.93
8.18
9.71
0.99
1.17
5.92
6.94
8.00
8.64
3.87
4.77
2.45
3.56
3.6
5.12
±1
58
01841-00404
50
01841-00406
42
01841-00408
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 44 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1121 Series
Steel
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Low carbon steel*
Acier bas carbone*
Stahl*
Acciaio a basso tenore di Acero bajo en carbono*
carbonio*
Zincato
Zincado
Passivazione chiara
Pasivado claro trivalente
trivalente
Zinc plated
Revêtement zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
*: SAE 1008 / EN 10263-2 C8C DIN 10263-2 C8C Qst 34-3
L
D
øB
øA
Fasteners per pod
ø
nom.
3.2
(1/8")
4.0
(5/32")
min.
max.
min.
max.
øB
D
L
øA
max.
max.
nom.
max.
Nombre de rivets
par chargeur /
Niete pro Magazin /
Rivetti per caricatore/
Uds./carga
kN1)
Part No/ref
±1
1.57
3.2
71
01121-00404
0.79
2.36
4.0
57
01121-00405
1.57
3.18
51
01121-00406
3.18
4.75
39
01121-00408
4.75
6.35
7.9
32
01121-00410
6.35
7.92
9.5
27
01121-00412
1.57
3.18
4.8
47
01121-00506
3.18
4.75
6.4
38
01121-00508
4.75
6.35
7.9
31
01121-00510
6.35
7.92
27
01121-00512
3.26
4.09
3.34
4.17
5.47
6.48
1.12
1.45
4.8
6.4
9.5
3.25
4.04
1.42
2.44
7.92
9.52
11.1
23
01121-00514
9.52
11.10
12.7
21
01121-00516
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 45 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1121 Series
Steel
L
D
øB
øA
Fasteners per pod
ø
nom.
4.8
(3/16")
6.4
(1/4")
min.
max.
min.
max.
øB
D
L
øA
max.
max.
nom.
max.
Nombre de rivets
par chargeur /
Niete pro Magazin /
Rivetti per caricatore/
Uds./carga
kN1)
Part No/ref
±1
1.57
4.0
50
01121-00605
1.57
3.18
5.6
38
01121-00607
3.18
4.75
7.2
33
01121-00609
4.75
6.35
28
01121-00611
6.35
7.92
24
01121-00613
7.92
9.52
12.0
21
01121-00615
9.52
11.10
13.5
19
01121-00617
11.10
12.70
15.1
17
01121-00619
3.18
4.75
7.2
32
01121-00809
4.75
6.35
8.8
27
01121-00811
6.35
7.92
24
01121-00813
7.92
9.52
21
01121-00815
9.52
11.10
13.5
19
01121-00817
11.10
12.70
15.1
17
01121-00819
4.85
6.35
4.93
6.43
8.87
10.44
1.78
2.11
8.8
10.0
10.0
12.0
4.85
6.35
3.20
4.40
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 46 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1122 Series
Steel
English
Français
Deutsch
Italiano
Español
Countersunk head
Tête fraisée
Senkkopf
Testa svasata
Cabeza avellanada
Low carbon steel*
Acier bas carbone*
Stahl*
Acciaio a basso tenore di Acero bajo en carbono*
carbonio*
Zincato
Zincado
Passivazione chiara
Pasivado claro trivalente
trivalente
Zinc plated
Revêtement zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
*: BS 3111 Type 0 SAE 1008 DIN 1654 Qst 34-3
L
D
øA
øB
120°
Fasteners per pod
ø
nom.
3.2
(1/8")
4.0
(5/32")
min.
D
L
øA
min.
max.
max.
max.
max.
0.91
1.57
3.4
90
01122-00404
0.91
2.36
4.1
72
01122-00405
1.57
3.17
61
01122-00406
3.17
4.75
46
01122-00408
4.75
6.35
8.1
37
01122-00410
6.35
7.92
9.7
31
01122-00412
1.57
3.17
4.9
61
01122-00506
3.17
4.75
6.5
46
01122-00508
4.75
6.35
8.1
37
01122-00510
6.35
7.92
31
01122-00512
4.09
3.34
4.17
5.20
6.22
0.92
0.97
4.9
6.5
9.7
3.25
4.04
kN1)
Part No/ref
min.
3.26
max.
øB
Nombre de rivets par
chargeur /
Niete pro Magazin/
Rivetti per caricatore/
Uds./carga
1.40
2.40
±1
7.92
9.52
11.3
26
01122-00514
9.52
11.10
12.9
23
01122-00516
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 47 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1122 Series
Steel
L
D
øA
øB
120°
Fasteners per pod
ø
nom.
4.8
(3/16")
6.4
(1/4")
min.
D
L
øA
min.
max.
max.
max.
max.
1.57
3.17
5.7
52
01122-00607
3.17
4.75
7.3
41
01122-00609
4.75
6.35
8.9
33
01122-00611
6.35
7.92
28
01122-00613
9.52
12.1
25
01122-00615
9.52
11.10
13.7
22
01122-00617
11.10
12.70
15.3
19
01122-00619
6.35
7.92
10.5
28
01122-00813
7.92
9.52
12.1
25
01122-00815
9.52
11.10
13.7
22
01122-00817
11.10
12.70
19
01122-00819
12.70
14.27
16.8
18
01122-00821
14.27
15.87
18.4
16
01122-00823
15.87
17.45
20.0
15
01122-00825
6.43
8.61
10.19
1.43
1.45
10.5
15.3
4.85
6.35
3.20
±1
7.92
6.35
4.93
kN1)
Part No/ref
min.
4.85
max.
øB
Nombre de rivets par
chargeur /
Niete pro Magazin/
Rivetti per caricatore/
Uds./carga
4.40
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 48 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1125 / 1131 / (1135) Series
Aluminium
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Aluminium alloy
Natural
Alliage d‘aluminium
Brut
Aluminium
Blank
Lega di alluminio
Nessuna finitura
Aluminio
Natural
Optional on request / sur demande / auf Anfrage / su richiesta / bajo petición:
For 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 Aluminium alloy replace part no. 01125 with 01135 /
pour 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 alliage d'aluminium remplacer la série 01125 par 01135 /
für 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 Aluminium-Legierung ersetzen Sie 01125 durch 01135 /
per 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 lega di alluminio sostituire 01125 con 01135 /
para 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 Aluminio cambiar 01125 por 01135
L
D
øB
øA
Fasteners
per pod
ø
nom.
2.4
(3/32")
3.2
(1/8")
4.0
(5/32")
øB
D
L
øA
max.
max.
± 0.18
max.
Aluminium
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
2.5 % Mg
AA 5052
DIN 1725
AlMg2.5
Werkstoff 3.3523
3.5 % Mg
BS 1473
5154A
DIN 1725
AlMg3.5
Werkstoff 3.3535
±1
Part No/ref
01131-00304
1.57
3.17
73
Part No/ref
01125-00304
1.57
3.17
4.75
52
01125-00306
01131-00306
3.17
4.75
6.35
41
01125-00308
01131-00308
4.75
6.35
33
01125-00310
01131-00310
6.35
7.92
9.52
28
01131-00312
7.92
9.52
11.10
24
01131-00314
9.52 11.10
12.70
22
min.
max.
min.
2.49
max.
2.55
4.14
0.94
7.92
2.48
01131-00316
0.00
1.57
3.17
71
01125-00404
01131-00404
1.57
3.17
4.75
51
01125-00406
01131-00406
3.17
4.75
6.35
39
01125-00408
01131-00408
4.75
6.35
32
01125-00410
01131-00410
6.35
7.92
9.52
27
01125-00412
01131-00412
7.92
9.52
11.10
23
01125-00414
1.57
3.17
4.75
47
01125-00506
01131-00506
3.17
4.75
6.35
38
01125-00508
01131-00508
4.75
6.35
7.92
31
01125-00510
01131-00510
6.35
7.92
27
01125-00512
01131-00512
7.92
9.52
23
01125-00514
01131-00514
3.26
4.09
3.34
4.17
5.52
6.53
1.15
1.48
7.92
9.52
11.10
3.25
4.06
9.52 11.10
12.70
01125-00516
01131-00516
11.10 12.70
14.40
21
01125-00518
01131-00518
12.70 14.27
16.00
01125-00520
01131-00520
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
- 49 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1125 / 1131 / (1135) Series
Aluminium
L
D
øB
øA
Fasteners
per pod
ø
min.
nom.
max.
min.
D
L
øA
max.
max.
± 0.18
max.
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
2.5 % Mg
AA 5052
DIN 1725
AlMg2.5
Werkstoff 3.3523
3.5 % Mg
BS 1473
5154A
DIN 1725
AlMg3.5
Werkstoff 3.3535
±1
Part No/ref
Part No/ref
01131-00605
1.57
3.96
50
1.57
3.17
5.56
38
01125-00607
01131-00607
3.17
4.75
7.14
33
01125-00609
01131-00609
4.75
6.35
8.74
28
01125-00611
01131-00611
6.35
7.92
24
01125-00613
01131-00613
7.92
9.52
11.91
21
01125-00615
01131-00615
9.52 11.10
13.49
19
01125-00617
01131-00617
11.10 12.70
15.09
17
01125-00619
01131-00619
7.14
32
01131-00809
4.8
(3/16")
6.4
4.85
4.93
8.92
1.81
10.31
4.82
3.17
4.75
4.75
6.35
8.74
27
01131-00811
6.35
7.92
10.31
24
01131-00813
7.92
9.52
21
01131-00815
19
01131-00817
9.52 11.10
(1/4")
max.
øB
Aluminium
11.91
6.35
6.43
10.49
2.14
13.49
6.32
11.10 12.70
15.09
17
01131-00819
12.70 14.27
16.66
16
01131-00821
14.27 15.87
18.26
14
01131-00823
15.87 17.45
19.84
13
01131-00825
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
ø
nom.
2.4 mm
(3/32")
3.2 mm
(1/8")
4.0 mm
(5/32")
4.8 mm
(3/16")
6.4mm
(1/4")
1125 Series
kN1)
1131 Series
kN1)
0.30
0.50
0.60
0.80
1.00
1.60
1.50
2.00
2.70
1) typical values / valeurs moyennes / typische Werte /
Valori tipici / valores típicos
- 50 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1132 / (1124 / 1136) Series
Aluminium
English
Français
Deutsch
Italiano
Español
Countersunk head
Tête fraisée
Senkkopf
Testa svasata
Cabeza avellanada
Aluminium alloy*
Natural
Alliage d‘aluminium*
Brut
Aluminium*
Blank
Lega di alluminio*
Nessuna finitura
Aluminio*
Natural
*: 3.5 % Mg BS 1473 5154A DIN 1725 Werkstoff 3.3535
Optional on request / sur demande / auf Anfrage / su richiesta / bajo petición:
For 2.5 % Mg AA 5052 DIN 1725 AlMg2.5 Werkstoff 3.3523 Aluminium alloy replace part no. 01132 with 01124 /
pour 2.5 % Mg AA 5052 DIN 1725 AlMg2.5 Werkstoff 3.3523 alliage d'aluminium remplacer la série 01132 par 01124 /
für 2.5 % Mg AA 5052 DIN 1725 AlMg2.5 Werkstoff 3.3523 Aluminium-Legierung ersetzen Sie 01132 durch 01124 /
per 2.5 % Mg AA 5052 DIN 1725 AlMg2.5 Werkstoff 3.3523 lega di alluminio sostituire 01132 con 01124 /
para 2.5 % Mg AA 5052 DIN 1725 AlMg2.5 Werkstoff 3.3523 Aluminio cambiar 01132 por 01124
For 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 Aluminium alloy replace part no. 01132 with 01136 /
pour 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 alliage d'aluminium remplacer la série 01132 par 01136 /
für 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 Aluminium-Legierung ersetzen Sie 01132 durch 01136 /
per 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 lega di alluminio sostituire 01132 con 01136 /
para 5 % Mg BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555 Aluminio cambiar 01132 por 01136
L
D
øA
øB
120°1)
120°
1)
ø 2.4 = 100°
Fasteners per pod
ø
nom.
min.
max.
min.
max.
øB
D
L
øA
min.
max.
max.
max.
1.57
2.4
(3/32")
3.2
(1/8")
4.0
(5/32")
1.57
3.17
3.17
4.75
Nombre de rivets par
chargeur /
Niete pro Magazin /
Rivetti per caricatore /
Uds./carga
kN1)
3.31
2.55
4.16
0.89
6.48
±1
90
4.88
2.49
2.46
0.50
Part No/ref
01132-00304
61
01132-00306
46
01132-00308
4.75
6.35
8.06
37
01132-00310
6.35
7.92
9.66
31
01132-00312
1.57
3.31
90
01132-00404
1.57
3.17
4.88
61
01132-00406
3.17
4.75
46
01132-00408
4.75
6.35
3.26
3.34
5.20
0.92
8.06
6.48
3.25
0.90
37
01132-00410
6.35
7.92
9.66
31
01132-00412
1.57
3.17
4.88
61
01132-00506
3.17
4.75
6.48
46
01132-00508
4.75
6.35
8.06
37
01132-00510
6.35
7.92
31
01132-00512
4.09
4.17
6.22
0.97
9.66
4.04
1.60
7.92
9.52
11.23
26
01132-00514
9.52
11.10
12.83
23
01132-00516
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 51 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1132 / (1124 / 1136) Series
Aluminium
L
D
øA
øB
120°1)
120°
1)
ø 2.4 = 100°
Fasteners per pod
ø
nom.
4.8
(3/16")
6.4
(1/4")
min.
max.
min.
max.
øB
D
L
øA
min.
max.
max.
max.
Nombre de rivets par
chargeur /
Niete pro Magazin /
Rivetti per caricatore /
Uds./carga
kN1)
Part No/ref
±1
1.57
3.17
5.69
52
01132-00607
3.17
4.75
7.27
41
01132-00609
4.75
6.35
33
01132-00611
6.35
7.92
28
01132-00613
8.87
4.85
4.93
8.61
1.43
10.44
4.80
2.00
7.92
9.52
12.04
25
01132-00615
9.52
11.10
13.62
22
01132-00617
11.10
12.70
15.22
19
01132-00619
3.17
4.75
7.27
41
01132-00809
4.75
6.35
8.87
33
01132-00811
6.35
7.92
10.44
28
01132-00813
6.35
6.43
10.19
1.45
12.04
6.30
2.70
7.92
9.52
25
01132-00815
9.52
11.10
13.62
22
01132-00817
11.10
12.70
15.22
19
01132-00819
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 52 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1143 Series
(1141 / 1142 / 1144 / 1147 / 1148)
Brass
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Brass*
Electro tin plated**
Laiton*
Kupfer-Zink-Legierung* Ottone*
Etamage électrolytique** verzinnt**
Stagnato**
Latón*
Estañado electrolitico**
*: EN 12166 CW 508L DIN 17660 CuZn37
**: We recommend tin plated parts 1143 and 1144 Series are installed within 9 months from the date they were produced.
Nous conseillons d’utiliser les pièces en laiton étamé du séries 1143 et 1144 sous un délai de 9 mois après la date de production.
Wir empfehlen, verzinnte Niete der Serien 1143 und 1144 innerhalb 9 Monaten nach Produktionsdatum zu verarbeiten.
Raccomandare di utilizzare i prodotti stagnati serie 1143 e 1144 entro 9 mesi a decorrere dalla data di fabbricazione.
Recomendamos utilizar sus piezas estañadas serie 1143 y 1144 antes de 9 meses desde la fecha de su fabricación.
Options on request - see next page / Option sur demande - voir page suivant / Optionen auf Anfrage - siehe nächste Seite /
Opzioni su richiesta - vedi pagina successiva / Opciones bajo petición - ver la página siguiente
L
D
øB
øA
Fasteners per pod
ø
nom.
min.
max.
min.
max.
øB
D
L
øA
max.
max.
nom.
max.
1.57
2.4
(3/32")
3.2
(1/8")
4.0
(5/32")
1.57
3.17
3.17
4.75
Nombre de rivets par
chargeur /
Niete pro Magazin /
Rivetti per caricatore /
Uds./carga
kN1)
3.17
2.55
4.09
0.92
6.35
±1
73
4.75
2.49
2.47
0.60
Part No/ref
01143-00304
52
01143-00306
41
01143-00308
4.75
6.35
7.92
33
01143-00310
6.35
7.92
9.52
28
01143-00312
1.57
3.17
71
01143-00404
1.57
3.17
4.75
51
01143-00406
3.17
4.75
4.75
6.35
1.57
3.17
4.75
47
01143-00506
3.17
4.75
6.35
38
01143-00508
4.75
6.35
31
01143-00510
3.26
3.34
5.46
1.12
6.35
3.25
1.10
7.92
4.09
4.17
6.47
1.45
7.92
9.52
4.04
1.80
39
01143-00408
32
01143-00410
6.35
7.92
27
01143-00512
7.92
9.52
11.10
23
01143-00514
9.52
11.10
12.70
21
01143-00516
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 53 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1143 Series
(1141 / 1142 / 1144 / 1147 / 1148)
Brass
L
D
øB
øA
Fasteners per pod
ø
nom.
4.8
(3/16")
min.
max.
min.
max.
øB
D
L
øA
max.
max.
nom.
max.
Nombre de rivets par
chargeur /
Niete pro Magazin /
Rivetti per caricatore /
Uds./carga
kN1)
Part No/ref
±1
1.57
3.17
5.56
38
01143-00607
3.17
4.75
7.14
33
01143-00609
4.75
6.35
6.35
7.92
4.85
4.93
8.86
1.78
8.74
10.31
4.85
2.50
28
01143-00611
24
01143-00613
7.92
9.52
11.91
21
01143-00615
9.52
11.10
13.49
19
01143-00617
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
Optional on request / sur demande / auf Anfrage / su richiesta / bajo petición:
Dome head bright Brass: replace part no. 01143 with 01141. Details on request.
Tête plate Laiton brilliante: remplacer la série 01143 par 01141. Détails sur demande.
Flachrundkopf Kupfer-Zink-Legierung blank: ersetzen Sie 01143 durch 01141. Details auf Anfrage.
Testa tonda Ottone brillante: sostituire 01143 con 01141. Dettagli su richiesta.
Cabeza alomada Latón brillante: cambiar 01143 por 01141. Más información bajo petición.
Dome head nickel plated Brass: replace part no. 01143 with 01147. Details on request.
Tête plate Laiton nickelé: remplacer la série 01143 par 01147. Détails sur demande.
Flachrundkopf Kupfer-Zink-Legierung vernickelt: ersetzen Sie 01143 durch 01147. Details auf Anfrage.
Testa tonda Ottone nichelato: sostituire 01143 con 01147. Dettagli su richiesta.
Cabeza alomada Latón niquelado: cambiar 01143 por 01147. Más información bajo petición.
Countersunk head bright Brass: replace part no. 01143 with 01142. Details on request.
Tête fraisée Laiton brilliante: remplacer la série 01143 par 01142. Détails sur demande.
Senkkopf Kupfer-Zink-Legierung blank: ersetzen Sie 01143 durch 01142. Details auf Anfrage.
Testa svasata Ottone brillante: sostituire 01143 con 01142. Dettagli su richiesta.
Cabeza avellanada Latón brillante: cambiar 01143 por 01142. Más información bajo petición.
Countersunk head electro tin plated Brass**: replace part no. 01143 with 01144. Details on request.
Tête fraisée Laiton etamage èlectrolytique**: remplacer la série 01143 par 01144. Détails sur demande.
Senkkopf Kupfer-Zink-Legierung verzinnt**: ersetzen Sie 01143 durch 01144. Details auf Anfrage.
Testa svasata Ottone stagnato**: sostituire 01143 con 01144. Dettagli su richiesta.
Cabeza avellanada Latón estañado electrolitico**: cambiar 01143 por 01144. Más información bajo petición.
Countersunk head nickel plated Brass: replace part no. 01143 with 01148. Details on request.
Tête fraisée Laiton nickelé: remplacer la série 01143 par 01148. Détails sur demande.
Senkkopf Kupfer-Zink-Legierung vernickelt: ersetzen Sie 01143 durch 01148. Details auf Anfrage.
Testa svasata Ottone nichelato: sostituire 01143 con 01148. Dettagli su richiesta.
Cabeza avellanada Latón niquelado: cambiar 01143 por 01148. Más información bajo petición.
- 54 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1162 Series
Aluminium
English
Français
Deutsch
Italiano
Español
Low profile head
Tête profil bas
Flachkopf
Testa basso profilo
Cabeza perfil bajo
Aluminium alloy*
(2.5 % Mg)
Natural
Alliage d‘aluminium*
(2.5% Mg)
Brut
Aluminium*
(2.5 % Mg)
Blank
Lega di alluminio*
(2.5% Mg)
Nessuna finitura
Aluminio*
(2.5% Mg)
Natural
*: AA 5052 DIN 1725 AlMg2.5 Werkstoff 3.3523
L
D
øB
øA
Fasteners per pod
ø
nom.
3.2
(1/8")
4.0
(5/32)
4.8
(3/16")
min.
max.
min.
max.
øB
D
L
øA
max.
max.
max.
max.
Nombre de rivets par
chargeur /
Niete pro Magazin/
Rivetti per caricatore/
Uds./carga
kN1)
Part No/ref
±1
1.57
3.46
71
01162-00404
1.57
3.17
5.06
51
01162-00406
3.17
4.75
6.63
39
01162-00408
4.75
6.35
32
01162-00410
6.35
7.92
9.81
27
01162-00412
7.92
9.52
11.38
23
01162-00414
3.26
3.34
6.66
1.05
8.23
3.24
0.60
9.52
11.10
12.96
21
01162-00416
1.57
3.17
4.86
47
01162-00506
2.36
3.93
5.64
3.17
4.75
4.75
6.35
6.35
7.92
7.92
9.52
9.52
11.10
01162-00507
6.46
4.09
4.17
8.16
1.30
38
01162-00508
31
01162-00510
9.63
27
01162-00512
11.21
23
01162-00514
12.81
21
01162-00516
8.03
4.05
1.00
1.57
4.55
50
01162-00605
1.57
3.17
5.85
38
01162-00607
3.17
4.75
7.42
33
01162-00609
4.75
6.35
9.02
28
01162-00611
6.35
7.92
24
01162-00613
4.85
4.93
10.06
1.55
10.60
4.82
1.50
7.92
9.52
12.20
21
01162-00615
9.52
11.10
13.77
19
01162-00617
11.10
12.70
15.37
17
01162-00619
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 55 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Chobert® 1164 Series
Aluminium
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Aluminium alloy*
(2.5 % Mg)
Natural
Alliage d‘aluminium*
(2.5% Mg)
Brut
Aluminium*
(2.5 % Mg)
Blank
Lega di alluminio*
(2.5% Mg)
Nessuna finitura
Aluminio*
(2.5% Mg)
Natural
*: AA 5052 DIN 1725 AlMg2.5 Werkstoff 3.3523
L
D
øB
øA
Fasteners per pod
ø
nom.
3.2
undersized2)
(1/8")
min.
max.
rec.
øB
D
L
øA
max.
max.
± 0.18
max.
Nombre de rivets par
chargeur /
Niete pro Magazin/
Rivetti per caricatore/
Uds./carga
Part No/ref
±1
1.60
3.18
71
01164-00404
1.60
3.17
4.75
51
01164-00406
3.17
4.77
6.35
39
01164-00408
4.77
6.35
32
01164-00410
6.35
7.92
9.52
27
01164-00412
7.92
9.50
11.10
23
01164-00414
9.50
11.07
12.70
21
01164-00416
3.05
5.12
1.15
7.92
3.01
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
2) undersized / dimension inférieure / Untermaß / misura inferiore / dimensión iinferior
- 56 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Double Flush Chobert® 1110 Series
Steel
English
Français
Deutsch
Italiano
Español
120° Countersunk
120° Tête fraisée
120° Senkkopf
120° Testa svasata
120° Cabeza avellanada
Low carbon steel*
Acier bas carbone*
Stahl*
Acciaio a basso tenore
di carbonio*
Zincato
Passivazione chiara
trivalente
Acero bajo en carbono*
Zinc plated
Revêtement zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
Zincado
Pasivado claro trivalente
*: EN 10263-2 C8C DIN 10263-2 C8C Qst 34-3
+0.05
0.81 - 0
ref.
L
D
121°
119°
øB
Rear sheet tail protrusion of installed fastener
is application dependent - up to 0.5 mm is
permissible.
+0.05
0.81 - 0
ref.
Le dépassement en face arrière après pose
dépend de l’application – possible jusqu’à 0,5 mm.
+0.076
+0.076
øA
120° 6.22- 0
6.22 - 0
120°
Der Bauteilüberstand des gesetzten Verbinders
auf der Blindseite ist applikationsabhängig - bis
zu 0,5 mm ist zulässig.
L'entità della sporgenza posteriore del rivetto
installato è dipendente dall'applicazione. Fino a
0,5 mm è ammessa.
El remache una vez colocado, sobresale por la
parte trasera de la chapa hasta un máximo de
0,5mm permitidos.
Fasteners
per pod
ø
nom.
min.
max.
3.2
2.00
2.67
2.41
2.92
(1/8")
Nombre de
rivets par
chargeur/
Niete pro
Magazin/
Rivetti per
caricatore/
Uds./carga
øB
D
L
øA
max.
max.
kN1)
kN1)
3.25
1.02
1.52
min.
max.
max.
max.
3.26
3.34
5.46
0.76
2.49
2.79
Part No/ref
typ.
120
01110-11708
112
01110-11294
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 57 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Grovit® 1101 Series
Steel
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Low carbon steel*
Acier bas carbone*
Stahl*
Acciaio a basso tenore di Acero bajo en carbono*
carbonio*
Zincato
Zincado
Passivazione chiara
Pasivado claro trivalente
trivalente
Zinc plated
Revêtement zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
*: SAE 1008 / EN 10263-2 C8C DIN 10263-2 C8C Qst 34-3
D
Y
L
øB
øJ
M
No. of grooves
No. of
grooves
ø
Y
nom.
max.
min.
3.6
3.45
3.2
(1/8")
4.0
(5/32")
4.8
(3/16")
D
L
øJ
M
max.
max.
max.
max.
max.
max.
3.55
5.6
1.0
8.8
3.43
3.2
3
1.6
3
4.4
3.2
4
4.8
4
2.4
3
8.8
4
7.2
4.40
4.50
6.6
1.3
5.2
3.2
7.2
10.4
4.37
11.9
5.08
5.18
9.0
1.7
8.0
15.9
5.05
Nombre de rivets
par chargeur /
Niete pro Magazin/
Rivetti per caricatore / Uds./carga
cannelures /
Rillen /
rigature /
aros
øB
2.8
Fasteners per pod
Part No/ref
kN1)
±1
1.20
32
01101-00410
36
01101-00508
25
01101-00512
22
01101-00514
31
01101-00609
17
01101-00619
2.20
3.50
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 58 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Grovit® 1103 / (1104) Series
Aluminium
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Aluminium alloy*
(2.5 % Mg)
Natural
Alliage d‘aluminium*
(2.5% Mg)
Brut
Aluminium*
(2.5 % Mg)
Blank
Lega di alluminio*
(2.5% Mg)
Nessuna finitura
Aluminio*
(2.5% Mg)
Natural
*: AA 5052, DIN 1725 AlMg2.5 Werkstoff 3.3523
Optional on request / sur demande / auf Anfrage / su richiesta / bajo petición:
120° countersunk head: replace part no. 01103 with 01104. Details on request.
120° tête fraisée: remplacer la série 01103 par 01104. Détails sur demande.
120° Senkkopf: ersetzen Sie 01103 durch 01104. Details auf Anfrage.
120° testa svasata: sostituire 01103 con 01104. Dettagli su richiesta.
120° cabeza avellanada: cambiar 01103 por 01104. Más información bajo petición.
D
Y
L
øB
øJ
M
No. of grooves
No. of
grooves /
ø
Y
nom.
max.
min.
2.0
3.6
2.4
(3/32")
3.2
(1/8")
4.0
2.8
(5/32")
5.2
4.8
3.2
(3/16")
7.2
øB
D
L
øJ
M
max.
max.
max.
max.
max.
max.
2.56
2.66
4.2
1.0
5.6
2.54
2.0
3.45
3.53
5.6
1.2
8.8
3.43
4.40
4.50
6.6
1.4
5.08
5.18
9.0
1.7
7.2
11.9
8.0
15.9
4.37
5.05
Fasteners per pod
Nombre de rivets
par chargeur /
Niete pro Magazin/
Rivetti per caricatore / Uds./carga
cannelures/
Rillen /
rigature /
aros
Part No/ref
kN1)
±1
2
0.28
46
01103-00306
3.2
3
0.50
32
01103-00410
1.6
3
36
01103-00508
22
01103-00514
31
01103-00609
17
01103-00619
4.8
4
2.4
3
8.8
4
0.82
1.16
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 59 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv®, Chobert® & Grovit® Nose Equipment
Ensembles de nez / Mundstücke / Equipaggiamento /
Equipos de colocación
LONG
LIMITED ACCESS
STANDARD
28.6
1.125
'B'
'B'
28.6
1.125
'B'
20.5
0.81
'E'
33.5
1.32
1
'E'
'D'
9
10
8
33.5
1.32
'D'
41.4
1.63
'D'
'E'
3
5
FLAT
FLAT
Applications with no or little access
restrictions.
Pour applications ne présentant que peu
ou pas de contraintes d'accès.
Für alle gut zugänglichen Nietpunkte.
Adatta per applicazioni senza restrizioni di
accesso o con restrizioni di accesso limitate.
Apta para aquellas aplicaciones sin ninguna
o pocas restricciones da acceso.
Allows access into very restrictive
applications.
Permet d'accéder à des applications à accès
très limité.
Für eng an den Bauteilseiten anliegende
Nietpunkte.
Consente l'accesso ad applicazioni con
serie restrizioni di accesso.
Permite el acceso en aplicaciones de acceso
extremadamente limitado.
Allows more penetration into applications.
Permet une pénétration supérieure dans les
applications sans autres contraintes d'accès.
Für tiefsitzende und eng an den Bauteilseiten anliegende Nietpunkte.
Consente una penetrazione maggiore
nell'applicazione senza altre restrizioni di
accesso.
Permite una mayor profundidad de acceso
en aquellas aplicaciones sin restricción de
acceso en anchura.
STANDARD CAM OPERATED
LIMITED ACCESS CAM OPERATED
LONG CAM OPERATED
UNIVERSAL RECESSED TAPERED
FLAT
'B'
31.8
1.25
31.8
1.25
'E'
34
1.34
'B'
'B'
'E'
'D'
37.1
1.46
'D'
34
1.34
'D'
'E'
31.8
1.25
2
4
6
FLAT
FLAT
FLAT
Nose equipment with addition of a twist cam to ease and speed up the nose jaw opening thus the pod reloading procedure.
Ensembles de nez avec, en plus, une came facilitant et accélérant l'ouverture du nez de pose, et donc le rechargement en fixations.
Zum leichteren Magazinieren haben diese Mundstücke durch einen Drehring zu öffnende Mundstückschnäbel.
Equipaggiamento con l'aggiunta di una camma per facilitare e rendere più veloce l'apertura della testata e pertanto la procedura di ricarica
dell'astuccio portarivetti.
Boquillas que incorporan una leva para facilitar y hacer más rápida la apertura de la boquilla y el procedimiento de carga.
LONG CURVED
'B'
'F'
28.6
1.125
RIVET
Ø
1/8
5/32
3/16
'D'
33.5
1.32
mm
15.7
17.5
18.3
Type
Œ - ’Flat / Plat / Flach / Piatta / Plana
“
Tapered / Biseauté / Spitz / A punta / Conica
”
Universal / Universel / Für erhöhte Klammerkraft / Universale / concava
•
Recessed / En retrait / Spezial / Incassata / Apriete
'E'
'F'
in.
.620
.690
.720
7
FLAT
Allows more penetration into applications.
Permet une pénétration supérieure dans les applications à accès limité.
Für tiefsitzende und eng an den Bauteilseiten anliegende Nietpunkte.
Consente una penetrazione maggiore nelle applicazioni con restrizioni di accesso.
Permite una mayor penetración en las aplicaciones con acceso limitado.
- 60 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv®, Chobert® & Grovit® Nose Equipment
Ensembles de nez / Mundstücke / Equipaggiamento /
Equipos de colocación
ø
nom.
2.4
(3/32")
3.2
(1/8")
4.0
(5/32")
4.8
(3/16")
6.0
6.4
(1/4")
Fastener
Rivets / Niettyp /
Rivetti / Remaches
Nose Equipment
Nez de pose / Mundstück /
Testata / Boquilla
Standard
Standard cam operated
Briv® / Chobert® /
Limited access
Grovit®
Limited access cam operated
Standard tapered
Standard
Standard cam operated
Long
Briv® / Chobert® /
Grovit®
Long cam operated
Long curved
Standard tapered
Double Flush Chobert®
Standard cam operated
Standard
Standard cam operated
®
®
Briv / Chobert /
Long
Grovit®
Long cam operated
Long curved
Chobert® / Grovit®
Standard tapered
Standard
Standard
cam operated
Briv® / Chobert® /
Long
®
Grovit
Long cam operated
Long curved
Chobert® / Grovit®
Standard tapered
Standard
Standard
cam operated
Briv®
Long
Long cam operated
Standard
Standard
cam operated
Chobert®
Long
Long cam operated
Type
Dimensions
Part No/ref
Dimension / Abmessungen /
Dimensioni / Dimensiones
B
Œ

Ž

“
Œ


‘
’
“

Œ


‘
’
“
Œ


‘
’
“
Œ


‘
Œ


‘
07150-03003
07170-04500
07274-01000
07177-03003
07170-03103
07150-03004
07170-04600
07150-04004
07170-05000
07150-05004
07170-03104
07537-03100
07150-03005
07170-04700
07150-04005
07170-05100
07150-05005
07150-03105
07150-03006
07170-04800
07150-04006
07170-05200
07150-05006
07150-03106
07170-05800
07170-05600
07170-05900
07170-05700
07150-03008
07170-04900
07150-04008
07170-05300
9.14
9.14
5.59
5.08
9.14
10.41
12.19
11.18
14.22
16.33
16.26
D
33.02
33.02
27.18
29.97
33.02
29.97
29.97
55.37
55.37
53.85
30.23
29.07
33.02
33.02
58.42
58.42
56.64
33.02
29.97
29.97
58.42
58.42
56.13
29.97
30.65
30.65
55.65
55.65
29.97
29.97
55.37
55.37
Head forming Nose Equipment / a formage de tête / kopfformend / a formatura di testa / tipo de boquilla
2.4
07150-03203
9.14
33.78
”
(3/32")
3.2
(1/8")
Briv®
4.0
1)
(5/32")
4.8
(3/16")
Standard
•
”
•
”
•
”
07170-03004
07150-03204
07170-03005
07150-03205
07170-03006
07150-03206
10.41
12.19
14.22
30.48
30.99
33.53
34.29
30.48
31.50
E
4.06
5.08
5.95
6.10
8.38
13.14
9.91
6.60
7.62
7.69
10.41
12.01
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) except stainless steel and countersunk / sauf inox et tête fraisée / außer Edelstahl und Senkkopf / eccetto acciaio inox e testa
svasata / excepto acero inoxidable y cabeza avellanada
” maximises clench but reduces grip range by approx. 0.4 mm / obtenir le plus fort serrage possible, mais la prise maximum se
trouve réduite d'envion 0,4 mm / maximierte Klammerkraft bei Verringerung des Klemmbereiches um ca. 0,4 mm / ottiene la
ribaditura più alta possibile, ma la distanza massima tra i centri dei rivetti viene ridotta di circa 0,4 mm / se alcanza un máximo
apriete en la fijación, pero el espesor máximo se reduce en aproximadamente 0,4 mm
•increases clench without affecting grip range / Augmente le sertissage sans influencer l’epeseur / erhöhte Klammerkraft bei
gleichem Klemmbereich / aumenta la ribaditura (la presa di rivettatura) senza compromettere lo spessore / incrementa el apriete
sin afectar al rango de espesores a remachar
- 61 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Briv® Mandrel & Spring Information
Aiguilles et Ressorts d'aiguille / Nietdorne und -federn /
Mandrini e Molle / Mandriles y Muelles
Mandrel / Aiguille / Nietdorn /
Mandrino / Mandril
Spring / Ressort d'aiguille / Nietdornfeder /
Molla / Muelle
P
P
P
P
øH
øH
øH
"V" cut
Mandrel for stainless steel Briv
Description
Description
Beschreibung
Descrizione
Descripción
ø
Standard Nose Equipment
øH
nom.
as rec.
+ 0.10
+0.20
3.2 (1/8")
Aluminium,
Steel, Brass
+ 0.13
+ 0.25
3.2 (1/8")
Stainless Steel
+ 0.13
4.0 (5/32")
Aluminium,
Steel, Brass
+ 0.13
+ 0.25
4.0 (5/32")
Stainless Steel
+ 0.13
Aluminium,
Steel, Brass
4.8 (3/16")
Stainless Steel
6.0
Aluminium,
Steel
P
max.
2.4 (3/32")
Aluminium,
Brass
4.8 (3/16")
Nez de pose Standard
Standard-Mundstück
Testata Standard
Boquilla Estándard
as rec.
as rec.
as rec.
as rec.
as rec.
+ 0.13
+ 0.25
+ 0.30
as rec.
+ 0.13
as rec.
+ 0.13
+ 0.25
Standard green
1. oversize yellow
2. oversize blue
Standard green
1. oversize yellow
2. oversize blue
Standard green
1. oversize yellow
Standard green
1. oversize yellow
2. oversize blue
Standard green
1. oversize yellow
Standard green
1. oversize yellow
2. oversize blue
3. oversize red
Standard green
1. oversize yellow
Standard green
1. oversize yellow
2. oversize blue
1.83
1.93
2.01
2.34
2.46
2.59
2.53
2.65
2.79
2.92
3.05
3.05
3.15
3.58
3.71
3.84
3.85
3.81
3.90
4.54
4.65
4.79
3.02
3.12
3.20
3.05
3.20
3.38
3.07
3.25
3.45
3.61
3.78
3.20
3.35
3.99
4.17
4.32
4.39
3.81
3.96
4.18
4.34
4.49
Mandrel
Part No/ref
07150-06013
07150-06113
07150-06213
07271-06414
07271-06514
07271-06614
07170-06804
07170-06824
07150-06015
07150-06115
07150-06215
07170-06805
07170-06825
07150-06016
07150-06116
07150-06216
07150-06316
07170-06806
07170-06826
07150-06018
07150-06118
07150-06218
Long Nose Equipment
Nez de pose Long
Langes Mundstück
Testata Lunga
Boquilla Larga
Spring
Part No/ref
Mandrel
Part No/ref
Spring
Part No/ref
07150-068031)
N/A
N/A
07150-06814
07150-06814
07170-06875
07170-06875
07170-06876
07170-06876
07150-06846
07271-07414
07271-07514
07271-07614
07170-07804
07170-07824
07150-07015
07150-07115
07150-07215
07170-07805
07170-07825
07150-07016
07150-07116
07150-07216
07150-07316
07170-07806
07170-07826
07150-07018
07150-07118
07150-07218
07150-07814
07150-07814
07170-07875
07170-07875
07170-07876
07170-07876
07150-07846
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) For use with standard flat nosepiece. For tapered nosepiece use spring 07170-06873 and for limited access nosepiece use
07170-06903.
Pour utilisation avec nez de pose standard. Avec le nez de pose biseauté utilisez le ressort d'aiguille 07170-06873 et avec le nez de pose
en retrait utilisez le 07170-06903.
Für Verwendung mit Standard Mundstück flach. Bei spitzem Mundstück verwenden Sie Feder 07170-06873 und bei abgesetztem
Mundstück Feder 07170-06903.
Per uso con nasello standard a filo. Con nasello a punta usate molle 07170-06873 e con nasello incassata usate molle 07170-06903.
Para uso con boquilla estándar plana. Con boquilla cónica utilizar muelle 07170-06873 y con boquilla de acceso limitado utilizar
07170-06903.
English
Français
Deutsch
Italiano
Español
Aluminium
Brass
Steel
Stainless Steel
Standard green
1. oversize yellow
2. oversize blue
3. oversize red
Aluminium
Laiton
Acier
Inox
Standard verte
1. surdimensionée jaune
2. surdimensionée bleue
3. surdimensionée rouge
Aluminium
Kupfer-Zink Leg.
Stahl
Edelstahl
Standard grün
1. Übermaß gelb
2. Übermaß blau
3. Übermaß rot
Alluminio
Ottone
Acciaio
Acciaio inox
Standard verde
1. maggiorazione giallo
2. maggiorazione blu
3. maggiorazionerosso
Aluminio
Latón
Acero
Acero inoxidable
Estándard verde
1. sobremedida amarillo
2. sobremedida azul
3. sobremedida rojo
- 62 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
øH
Chobert® & Grovit® Mandrel & Spring Information
Aiguilles et Ressorts d'aiguille / Nietdorne und -federn /
Mandrini e Molle / Mandriles y Muelles
Mandrel / Aiguille / Nietdorn /
Mandrino / Mandril
Spring / Ressort d'aiguille / Nietdornfeder /
Molla / Muelle
P
P
øH
øH
Short Reach (S/R) mandrel
Description
Description
Beschreibung
Descrizione
Descripción
ø
Standard Nose Equipment
øH
Nez de pose Standard
Standard-Mundstück
Testata Standard
Boquilla Estándard
P
P
S/R
max.
max.
1.84
4.22
Mandrel1)
Part No/ref
1.80 07150-06003
Brass,
Aluminium
+ 0.04 1. oversize yellow 1.88
4.42
1.98 07150-063031)
3.2 (1/8")
as rec.
nom.
2.4 (3/32")
as rec.
Standard green
Long Nose Equipment
Nez de pose Long
Langes Mundstück
Testata Lunga
Boquilla Larga
Spring
Part No/ref
Mandrel3)
Spring
Part No/ref
Part No/ref
07150-07003
S/R only
07150-068032) =07150-09103 07150-07803
07150-07103
07150-07004
07150-07104
07150-06804
07150-07804
07150-07204
07150-07304
2. oversize blue 1.93 4.70 N/A 07150-06103
Standard green 2.24 5.49 2.29 07150-06004
Aluminium + 0.10 1. oversize yellow 2.34 6.02 2.49 07150-06104
Steel, Brass
+ 0.25 2. oversize blue 2.49 6.81 2.79 07150-06204
Chobert® /
Grovit®
+ 0.35 3. oversize red 2.59 7.32 3.00 07150-06304
3.2 (1/8") as rec. Standard green 2.24 N/A 2.29 07150-08004
Double Flush + 0.10 1. oversize yellow 2.34 N/A 2.49 07150-08104 07271-06630
N/A
N/A
Chobert®
+ 0.25 2. oversize blue 2.49 N/A 2.79 07150-08204
as rec. Standard green 2.72 6.20 2.54 07150-06005
07150-07005
4.0 (5/32") + 0.20 1. oversize yellow 2.92 7.21 2.95 07150-06105 07170-06875 07150-07105 07170-07875
Aluminium,
2. oversize blue 3.10 8.13 3.30 07150-06205
07150-07205
Steel, Brass + 0.38
+ 0.63 3. oversize red 3.35 9.45 3.81 07150-06305 07150-06805 07150-07305 07150-07805
4.8 (3/16") as rec. Standard green 3.35 6.27 2.59 07150-06006 07170-06876 07150-07006 07170-07876
Aluminium, + 0.35 1. oversize yellow 3.71 8.13 3.30 07150-06106
07150-07106
Steel, Brass + 0.60 2. oversize blue 3.96 9.45 3.81 07150-06206 07150-06806 07150-07206 07150-07806
07150-07008
6.4 (1/4") as rec. Standard green 4.67 6.81 2.79 07150-06008
07150-06808
07150-07808
Alum., Steel + 0.30 1. oversize yellow 4.98 8.38 3.40 07150-06108
07150-07108
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1)For S/R mandrel substitute 6 with 8 (07150-06xxx => 07150-08xxx), exception: 07150-06303 becomes 07150-08103.
+ 0.09
Pour aiguille S/R remplacer 6 par 8 (07150-06xxx => 07150-08xxx), exception: 07150-06303 change à 07150-08103.
Für S/R Nietdorn ersetzen Sie 6 durch 8 (07150-06xxx => 07150-08xxx), Ausnahme: 07150-06303 wird zu 07150-08103.
Per mandrino S/R sostituire 6 con 8 (07150-06xxx => 07150-08xxx), eccezione: 07150-06303 cambia 07150-08103.
Con mandril cono corto S/R cambiar 6 por 8 (07150-06xxx => 07150-08xxx), excepción: 07150-06303 cambia a 07150-08103.
2)For use with standard flat nosepiece. Tapered nosepiece uses spring 07170-06873 and limited access nosepiece uses 07170-06903.
Pour utilisation avec nez de pose standard. Avec le nez de pose biseauté utilisez le ressort d'aiguille 07170-06873 et avec le nez de pose
en retrait utilisez le 07170-06903.
Für Verwendung mit Standard Mundstück flach. Bei spitzem Mundstück verwenden Sie Feder 07170-06873, bei abgesetztem Mundstück Feder
07170-06903.
Per uso con nasello standard a filo. Con nasello a punta usate molle 07170-06873 e con nasello incassata usate molle 07170-06903.
Para uso con boquilla estándar plana. Con boquilla cónica utilizar muelle 07170-06873 y con boquilla de acceso limitado utilizar 07170-06903.
3)For S/R mandrel substitute 7 with 9 (07150-07xxx => 07150-09xxx)
Pour aiguille S/R remplacer 7 par 9 (07150-07xxx => 07150-09xxx)
Für S/R Nietdorn ersetzen Sie 7 durch 9 (07150-07xxx => 07150-09xxx)
Per mandrino S/R sostituire 7 con 9 (07150-07xxx => 07150-09xxx)
Con mandril cono corto S/R cambiar 7 por 9 (07150-07xxx => 07150-09xxx)
English
Aluminium
Brass
Steel
Stainless Steel
Standard green
1. oversize yellow
2. oversize blue
3. oversize red
Français
Aluminium
Laiton
Acier
Inox
Standard verte
1. surdimensionée jaune
2. surdimensionée bleue
3. surdimensionée rouge
Deutsch
Aluminium
Kupfer-Zink Leg.
Stahl
Edelstahl
Standard grün
1. Übermaß gelb
2. Übermaß blau
3. Übermaß rot
- 63 -
Italiano
Alluminio
Ottone
Acciaio
Acciaio inox
Standard verde
1. maggiorazione giallo
2. maggiorazione blu
3. maggiorazionerosso
Español
Aluminio
Latón
Acero
Acero inoxidable
Estándard verde
1. sobremedida amarillo
2. sobremedida azul
3. sobremedida rojo
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Rivscrew® 1722 / (1723) Series
Steel
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Stahl*
Acciaio a basso tenore di Acero bajo en carbono*
carbonio*
Zincato
Zincado
Passivazione chiara
Pasivado claro trivalente
trivalente
Low carbon steel*
Acier à faible teneur en
carbone*
Zinc plated
Revêtement zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
* : BS 3111 Type 0, SAE 1008, DIN 1654 Qst 34-3
Optional on request / sur demande / auf Anfrage / su richiesta / bajo petición:
Tin plated: replace part no. 01722 with 01723. / Etamé: remplacer la série 01722 par 01723. / Verzinnt: ersetzen Sie 01722 durch
01723. Stagnato: sostituire 01722 con 01723. / Estañado: cambiar 01722 por 01723.
M
D
øB
øH
øC
L
Front
sheet
Front sheet
ø
øH
nom.
max.
W
V
max.
Fasteners
per pod
Rear sheet
pièce à fixer / pièce support/
oberes Bauteil / unteres Bauteil/
piastra frontale/ piastra posteriore / pieza
pieza anterior
posterior
min.
Rear
sheet
≤ 105 HV5
min.
max.
øC
M
W
V
max.
max.
min.
max.
5.2
6.2
7.2
8.2
10.1
5.2
6.2
7.2
8.2
9.2
10.1
13.1
2.85
3.85
1.62 4.83
5.82
7.80
2.85
3.85
4.83
1.62 5.82
6.81
7.80
10.72
2.8
2.6
2.95
3.02
2.62
2.70
5.9
3.0
2.8
3.07
3.15
2.82
2.89
5.9
øB1)
D1)
max. max.
6.1
1.4
6.1
1.4
L
Nombre de
rivets par
chargeur/
Niete pro
Magazin/
Rivetti per
caricatore /
Uds./carga
max.
±1
4.0
5.0
6.0
7.0
9.0
4.0
5.0
6.0
7.0
8.0
9.0
11.9
62
52
43
38
30
62
52
43
38
34
30
23
Part No/ref
01722-02806
01722-02807
01722-02809
01722-02810
01722-02812
01722-03006
01722-03007
01722-03009
01722-03010
01722-03011
01722-03012
01722-03016
all dimensions in mm / en milimètres / alle Maße in mm / in millimetri / en milímetros
1) Dimensions B and D are generated during the installation process and should only be used as an indication of the minimum
space required.
Les cotes B et D ne sont données qu'à titre et représentent l'encombrement maximal de la tête du Rivscrew après pose.
Maße B und D werden während der Verarbeitung erzeugt und sollten nur als Anhaltspunkt für den minimalen Platzbedarf
verwendet werden.
Le dimensioni B e D sono generate durante il processo d‘installazione e devono essere usate solo come un‘indicazione del minimo
spazio richiesto.
Las dimensiones B y D se conforman en el proceso de colocación y deben tomarse como orientativas para comprobar el espacio
mínimo necesario.
- 64 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Rivscrew® 1722 / (1723) Series
Steel
M
D
øB
øH
øC
L
Front
sheet
Front sheet
ø
øH
nom.
max.
Rear
sheet
≤ 105 HV5
W
V
Fasteners
per pod
Rear sheet
pièce à fixer / pièce support/
oberes Bauteil / unteres Bauteil/
piastra frontale/ piastra posteriore / pieza
pieza anterior
posterior
min.
max.
min.
max.
øC
M
W
V
max.
max.
min.
max.
3.1
3.50
3.58
3.10
3.17
6.0
3.6
4.19
4.27
3.61
3.68
6.3
Part No/ref
max.
±1
4.0
62
01722-03506
6.2
3.85
5.0
52
01722-03507
6.0
43
01722-03509
7.0
38
01722-03510
8.2
max. max.
L
2.85
4.83
1.62
5.82
6.1
1.4
9.2
6.81
8.0
34
01722-03511
10.1
7.80
9.0
30
01722-03512
14.1
11.76
12.9
21
01722-03517
5.2
2.85
4.0
62
01722-04006
6.2
3.85
5.0
52
01722-04007
6.0
43
01722-04009
7.0
38
01722-04010
8.0
34
01722-04011
7.2
4.0
D1)
5.2
7.2
3.5
øB1)
Nombre de
rivets par
chargeur/
Niete pro
Magazin/
Rivetti per
caricatore /
Uds./carga
8.2
4.83
1.62
5.82
6.4
1.4
9.2
6.81
10.1
7.80
9.0
30
01722-04012
12.1
9.78
11.0
25
01722-04015
all dimensions in mm / en milimètres / alle Maße in mm / in millimetri / en milímetros
1)Dimensions B and D are generated during the installation process and should only be used as an indication of the minimum
space required.
Les cotes B et D ne sont données qu'à titre et représentent l'encombrement maximal de la tête du Rivscrew après pose.
Maße B und D werden während der Verarbeitung erzeugt und sollten nur als Anhaltspunkt für den minimalen Platzbedarf
verwendet werden.
Le dimensioni B e D sono generate durante il processo d‘installazione e devono essere usate solo come un‘indicazione del minimo
spazio richiesto.
Las dimensiones B y D se conforman en el proceso de colocación y deben tomarse como orientativas para comprobar el espacio
mínimo necesario.
Hex Key Size
nom.
kN
kN
Dim. clef 6 pans
Sechskantgröße
Dim. chiave esagonale
llave Allen
2.8
0.90
0.70
1.60 (1/16")
3.0
0.90
0.80
1.60 (1/16")
3.5
1.00
1.00
2.0 (5/64")
4.0
1.30
1.20
2.5
ø
- 65 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Rivscrew® 1733 Series
Steel
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Stahl*
Acciaio a basso tenore di Acero bajo en carbono*
carbonio*
Zincatura
Zincado
Passivazione chiara
Pasivado claro trivalente
trivalente
Low carbon steel*
Acier à faible teneur en
carbone*
Zinc plated
Revêtement zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
* : SAE 1008
M
D
L
øC
øH
Rear
sheet
Front
sheet
Front sheet
≤ 80 HV5
W
V
Hex Key Size
Rear sheet
pièce à fixer / pièce support /
oberes Bauteil / unteres Bauteil /
piastra frontale / piastra postepieza anterior
riore /
pieza posterior
ø
øH
nom.
max.
min.
max.
min.
max.
4.8
4.48
4.90
5.00
4.50
4.60
M
øC
D
max. max. max.
8.4
13.3
9.5
1.7
W
min.
2.8
V
L
Dim. clef 6
pans /
Sechskantgröße /
Dim. chiave
esagonale /
llave Allen
max. max.
6.5
8.7
11.5 13.5
Fasteners
per pod
Nombre de
rivets par
chargeur /
Niete pro
Magazin /
Rivetti per
caricatore /
Uds./carga
Part No/ref
±1
2.5
28
01733-04810
19
01733-04816
all dimensions in mm / en milimètres / alle Maße in mm / in millimetri / en milímetros
- 66 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Rivscrew® 1772 Series
Steel
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Stahl*
Acciaio a basso tenore di Acero bajo en carbono*
carbonio*
Zincatura
ZincadoPasivado claro
Passivazione chiara
trivalente
trivalente
Low carbon steel*
Acier à faible teneur en
carbone*
Zinc plated
Revêtement zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
* : BS 31110 Type 0, SAE 1008, DIN 1654 QSt 34-3
M
D
øC
øH
Rear
sheet
Front
sheet
ø
øH
nom. max.
W
V
Front sheet
Rear sheet
pièce à fixer /
oberes Bauteil/
piastra frontale/
pieza anterior
pièce support/
unteres Bauteil/
piastra posteriore / pieza
posterior
min.
max.
min.
≤ 105 HV5
Hex Key Size
M
øC
D
W
V
2.8 2.60 2.95
3.02
2.62
2.70
3.0 2.82 3.07
3.15
2.82
2.89
3.5 3.09 3.50
3.58
3.10
3.17
4.0 3.60 4.19
4.27
3.61
3.68
6.2
1.2
1.62
6.2
1.2
1.62
6.2
1.2
1.62
6.2
1.2
1.62
3.15
4.17
5.18
6.17
8.79
3.15
4.17
5.18
6.17
7.87
8.79
11.61
3.15
4.17
5.18
6.17
7.87
8.79
11.99
2.85
3.85
4.83
5.82
6.81
7.80
9.78
Fasteners
per pod
Dim. clef 6
tenue au
Nombre de
pans /
couple /
rivets par
SechskantVerdrehchargeur /
größe /
moment /
Niete pro
Dim. chiave
coppia di
Magazin /
esagonale / rotazione /
Rivetti per
llave Allen resistencia al caricatore /
giro
Uds./carga
max. max. max. max. min. max.
4.2
6.2
7.2
7.3
9.8
4.2
5.2
6.2
7.3
8.9
9.8
12.7
4.2
5.2
6.2
7.3
8.9
9.8
12.7
4.2
5.2
6.2
7.3
8.2
9.2
11.2
Torque-toturn
Nm
1.60
(1/16")
0.28
1.60
(1/16")
0.28
2.0
(5/64")
0.56
2.50
0.62
Part No/ref
±1
62
59
43
38
30
62
52
43
38
43
30
23
62
52
43
38
34
30
21
62
52
43
38
34
30
25
01772-02806
01772-02807
01772-02809
01772-02810
01772-02812
01772-03006
01772-03007
01772-03009
01772-03010
01772-03011
01772-03012
01772-03016
01772-03506
01772-03507
01772-03509
01772-03510
01772-03511
01772-03512
01772-03517
01772-04006
01772-04007
01772-04009
01772-04010
01772-04011
01772-04012
01772-04015
all dimensions in mm / en milimètres / alle Maße in mm / in millimetri / en milímetros
- 67 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Rivscrew® PL 1742 Series
Steel
English
Français
Deutsch
Italiano
Español
Dome head
Tête bombée
Flachrundkopf
Testa tonda
Cabeza alomada
Stahl*
Acciaio a basso tenore di Acero bajo en carbono*
carbonio*
Zincato
Zincado
Passivazione chiara
Pasivado claro trivalente
trivalente
Low carbon steel*
Acier à faible teneur en
carbone*
Zinc plated
Zingué
Clear trivalent passivated Passivation claire
trivalente
Verzinkt
Klar chromatiert,
Cr6-frei
* : BS 3111 Type 0, SAE 1008, DIN 1654 Qst 34-3
V
M
W
øH
øC
D
Front sheet
ø
øH
nom.
max.
3.0
Rear
sheet
Front
sheet
2.81
Rear sheet
Pièce à fixer
Pièce support
oberes Bauteil
unteres Bauteil
piastra frontale piastra posteriore
pieza anterior
pieza posterior
min.
3.28
max.
3.35
min.
2.82
max.
2.90
Hex Key Size
øC
D
M
W
V
max
max
max.
min.
max.
6.2
6.93
5.46
10.11
8.64
13.28
6.93
3.5
3.09
3.53
3.63
3.10
3.18
6.2
1.19
4.0
3.39
4.09
4.17
3.40
3.47
8.1
4.93
5.00
4.00
4.08
8.1
11.81
5.46
8.64
13.28
11.81
6.93
5.46
10.11
8.64
6.93
3.99
2.79
10.11
13.28
4.5
Dim. clef 6 pans/
Sechskantgröße/
Dim. chiave
esagonale /
llave Allen
3.04
11.81
1.60
(1/16")
1.60
(1/16")
2.00
(5/64")
5.46
10.11
8.64
13.28
11.81
Part No/ref
01742-03008
01742-03012
01742-03016
01742-03508
01742-03512
01742-03516
01742-04008
01742-04012
01742-04016
01742-04508
2.50
01742-04512
01742-04516
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
- 68 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Rivscrew® & Rivscrew® PL Nose Equipment
Ensembles de nez / Mundstücke / Equipaggiamento / Equipos de colocación
Rivscrew® 1722 / 1723 Series
Head forming / a formage de tête / kopfformend / a formatura di testa / Tipo de boquilla
STANDARD CAM OPERATED
LONG
28.58
1.125
32.64
1.285
'B'
'B'
'E'
31.8
1.25
'E'
34
1.34
'D'
25.4
1.0
'D'
HEAD FORMING (HF)
HEAD FORMING (HF)
Applications with no or little access
restrictions.
Pour applications ne présentant que peu
ou pas de contraintes d'accès.
Für alle gut zugänglichen Nietpunkte.
Adatta per applicazioni senza restrizioni di
accesso o con restrizioni di accesso limitate.
Apta para aquellas aplicaciones sin ninguna
o pocas restricciones da acceso.
Allows more penetration into applications.
Permet une pénétration supérieure dans les
applications sans autres contraintes d'accès.
Für tiefsitzende und eng an den Bauteilseiten anliegende Nietpunkte.
Consente una penetrazione maggiore
nell'applicazione senza altre restrizioni di
accesso.
Permite una mayor profundidad de acceso
en aquellas aplicaciones sin restricción de
acceso en anchura.
Rivscrew® 1772 / 1733 Series & Rivscrew® PL
Rivscrew® 1733 Series
LONG
STANDARD CAM OPERATED
STANDARD
28.6
1.125
'B'
'B'
'B'
31.8
1.25
28.6
1.125
'E'
'E'
33.5
1.32
'D'
FLAT
Applications with no or little access
restrictions.
Pour applications ne présentant que peu
ou pas de contraintes d'accès.
Für alle gut zugänglichen Nietpunkte.
Adatta per applicazioni senza restrizioni di
accesso o con restrizioni di accesso limitate.
Apta para aquellas aplicaciones sin ninguna
o pocas restricciones da acceso.
34
1.34
'D'
FLAT
33.5
1.32
'D'
'E'
FLAT
Nose equipment with addition of a twist
cam to ease and speed up the nose jaw
opening thus the pod reloading procedure.
Ensembles de nez avec, en plus, une came
facilitant et accélérant l'ouverture du
nez de pose, et donc le rechargement en
fixations.
Zum leichteren Magazinieren haben diese
Mundstücke durch einen Drehring zu
öffnende Mundstückschnäbel.
Equipaggiamento con l'aggiunta di una
camma per facilitare e rendere più veloce
l'apertura della testata e pertanto la procedura di ricarica dell'astuccio portarivetti.
Boquillas que incorporan una leva para
facilitar y hacer más rápida la apertura de
la boquilla y el procedimiento de carga.
Allows more penetration into applications.
Permet une pénétration supérieure dans les
applications sans autres contraintes d'accès.
Für tiefsitzende und eng an den Bauteilseiten anliegende Nietpunkte.
Consente una penetrazione maggiore
nell'applicazione senza altre restrizioni di
accesso.
Permite una mayor profundidad de acceso
en aquellas aplicaciones sin restricción de
acceso en anchura.
- 69 -
www.StanleyEngineeredFastening.com
Please check
for latest data and installation information.
Rivscrew® & Rivscrew® PL Nose Equipment
Ensembles de nez / Mundstücke / Equipaggiamento /
Equipos de colocación
ø
nom.
Fastener
Rivets / Niettyp /
Rivetti / Remaches
2.8 mm
3.0 mm
3.5 mm
Rivscrew®
1722 / 1723
Series
4.0 mm
2.8 mm
3.0 mm
3.5 mm
Rivscrew®
1772 Series
(pre-formed
head)
4.0 mm
4.8 mm
3.0 mm
3.5 mm
4.0 mm
4.5 mm
Rivscrew®
1733 Series
(preformed
head)
Rivscrew® PL
(preformed
head)
Dimensions
Nose Equipment /
Part No/ref
B
D
E
Standard cam operated
07271-03000
10.41
29.97
6.10
Nez de pose / Mundstück /
Testata / Boquilla
Dimension / Abmessungen /
Dimensioni / Dimensiones
Long
07271-08600
15.50
67.10
6.35
Standard cam operated
07271-03000
10.41
29.97
6.10
Long
07271-08600
15.50
67.10
6.35
Standard cam operated
07271-03500
10.41
29.97
6.10
Long
07271-08700
15.50
67.10
6.35
Standard cam operated
07271-04000
10.41
29.97
6.35
15.50
67.10
7.10
10.41
29.97
5.08
12.19
33.02
6.10
Long
07271-08800
Standard
07150-03004
Standard cam operated
07170-04600
Standard
07150-03004
Standard cam operated
07170-04600
Standard
07150-03004
Standard cam operated
07170-04600
Standard
07150-03005
Standard cam operated
07170-04700
Standard
07150-03006
29.97
14.22
8.38
Long
07150-04006
58.42
Standard cam operated
07170-04600
10.41
29.97
5.08
Standard
07150-03005
12.19
33.02
6.10
all dimensions in mm / en milimètres / alle Maße in mm / in millimetri / en milímetros
- 70 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Rivscrew® & Rivscrew® PL Mandrel & Spring Information
Aiguilles et Ressorts d'aiguille / Nietdorne und -federn /
Mandrini e Molle / Mandriles y Muelles
Mandrel / Aiguille / Nietdorn /
Mandrino / Mandril
Spring / Ressort d'aiguille / Nietdornfeder /
Molla / Muelle
P
H
Nose
ø
Nez
Mundstück
Testata
Boquilla
Description
Mandrel
Description
Beschreibung
Descrizione
Descripción
H
A/F
nom.
Part No/ref.
Rivscrew® 1722 / 1723
07271-03000
Standard cam operated
2.8
07271-08600
Long
07271-03000
Standard cam operated
3.0
07271-08600
Long
07271-03500
Standard cam operated
3.5
07271-08700
Long
07271-04000
Standard cam operated
4.0
07271-08800
Long
Rivscrew® 1772 Series (preformed head)
07150-03004
Standard
2.8
07170-04600
Standard cam operated
07150-03004
Standard
3.0
07170-04600
Standard cam operated
07150-03004
Standard
3.5
07170-04600
Standard cam operated
07150-03005
Standard
4.0
07170-04700
Standard cam operated
Rivscrew® 1733 Series (preformed head)
07150-03006
Standard
4.8
07150-04006
Long
Rivscrew® PL 1742 (preformed head)
3.0
07170-04600
Standard cam operated
3.5
4.0
07150-03005
Standard
4.5
P
max.
Spring
Aiguille
Niedorn
Mandrino
Mandril
Ressort d'aguille
Nietdornfeder
Molla
Muelle
Part No/ref
Part No/ref
07271-06030
07271-07030
07271-06030
07271-07030
07271-06035
07271-07035
07271-06140
07271-07140
07271-06630
07271-07630
07271-06630
07271-07630
07271-06635
07271-07635
07271-06640
07271-07640
1.65
3.23
1.65
3.23
2.10
3.35
2.62
3.81
1.65
3.23
07271-06030
07271-06630
1.65
3.23
07271-06030
07271-06630
2.10
3.35
07271-06035
07271-06635
2.62
3.81
07271-06140
07271-06640
2.62
3.81
07271-06140
07271-07140
07271-06640
07271-07640
1.65
3.75
07279-06429
07271-06630
2.10
2.62
3.35
3.81
07271-06035
07271-06140
07271-06635
07271-06640
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
- 71 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avtronic® 1188 Series
Brass
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Brass*
Electro tin plated**
Laiton*
Kupfer-Zink Legierung* Ottone*
Etamage électrolytique** verzinnt**
Stagnato**
Latón*
Estañado electrolítico**
*: BS EN 12166 CW 508L DIN 17660 CuZn37
**: We recommend tin plated parts 1188 Series are installed within 9 months from the date they were produced.
Nous conseillons d’utiliser les pièces en laiton étamé du série 1188 sous un délai de 9 mois après la date de production.
Wir empfehlen, verzinnte Niete der Serie 1188 innerhalb 9 Monaten nach Produktionsdatum zu verarbeiten.
Raccomandare di utilizzare i prodotti stagnati serie 1188 entro 9 mesi a decorrere dalla data di fabbricazione.
Recomendamos utilizar sus piezas estañadas serie 1188 antes de 9 meses desde la fecha de su fabricación.
øB
D
øB
L ≤ 10 mm:
D
L > 10 mm:
L
0.76
± 0.38
L
øJ
øJ
0.76
± 0.38
Fasteners per pod
ø
øB
D
L
øJ
F
nom.
min.
max.
max.
max.
max.
max.
kN1)
2.50
2.60
4.14
0.94
2.80
2.90
4.14
0.94
±1
51
01188-02506
6.78
41
01188-02508
8.36
33
01188-02510
28
01188-02512
24
01188-02514
13.13
21
01188-02516
14.71
19
01188-02518
16.31
17
01188-02520
17.88
16
01188-02522
11.53
2.48
0.045
5.18
52
01188-02806
6.78
41
01188-02808
8.36
33
01188-02810
28
01188-02812
24
01188-02814
13.13
21
01188-02816
14.71
19
01188-02818
16.31
17
01188-02820
17.88
16
01188-02822
9.96
2.8
Part No/ref
5.18
9.96
2.5
Nombre de rivets
par chargeur/
Niete pro Magazin/
Rivetti per
caricatore /
Uds./carga
11.53
2.74
0.067
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 72 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avtronic® 1189 Series
Aluminium
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Aluminium alloy*
(5 % Mg)
Natural
Alliage d'aluminium*
(5% Mg)
Brut
Aluminium*
(5 % Mg)
Blank
Lega di alluminio*
(5% Mg)
Nessuna finitura
Aluminio*
(5% Mg)
Natural
*: BS 1473 5056A DIN 1725 AlMg5 Werkstoff 3.3555
øB
D
øB
L ≤ 10 mm:
D
L > 10 mm:
L
L
0.76
± 0.38
øJ
øJ
0.76
± 0.38
Fasteners per pod
ø
øB
D
L
D
max.
max.
max.
max.
F
nom.
min.
max.
kN
1)
2.50
2.60
4.14
0.94
2.80
2.90
4.14
0.94
±1
5.18
51
01189-02506
41
01189-02508
8.36
33
01189-02510
28
01189-02512
24
01189-02514
13.13
21
01189-02516
14.71
19
01189-02518
16.31
17
01189-02520
17.88
16
01189-02522
11.53
2.48
0.03
5.18
52
01189-02806
6.78
41
01189-02808
8.36
33
01189-02810
28
01189-02812
24
01189-02814
13.13
21
01189-02816
14.71
19
01189-02818
16.31
17
01189-02820
17.88
16
01189-02822
9.96
2.8
Part No/ref
6.78
9.96
2.5
Nombre de rivets
par chargeur/
Niete pro Magazin/
Rivetti per caricatore / Uds./carga
11.53
2.74
0.04
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) typical values / valeurs moyennes / typische Werte / Valori tipici / valores típicos
- 73 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avtronic® Nose Equipment
Ensembles de nez / Mundstücke / Equipaggiamento /
Equipos de colocación
LONG
STANDARD
LIMITED ACCESS CAM OPERATED
28.6
1.125
'B'
'B'
'B'
28.6
1.125
31.8
1.25
'E'
'E'
33.5
1.32
'D'
33.5
1.32
ø
nom.
2.5
2.8
Nose Equipment
37.1
1.46
'E'
'D'
FLAT
FLAT
Allows more penetration into applications.
Permet une pénétration supérieure dans
les applications sans autres contraintes
d'accès.
Für tiefsitzende und eng an den Bauteilseiten anliegende Nietpunkte.
Consente una penetrazione maggiore
nell'applicazione senza altre restrizioni di
accesso.
Permite una mayor profundidad de acceso
en aquellas aplicaciones sin restricción de
acceso en anchura.
Allows access into very restrictive
applications.
Permet d'accéder à des applications à accès
très limité.
Für eng an den Bauteilseiten anliegende
Nietpunkte.
Consente l'accesso ad applicazioni con
serie restrizioni di accesso.
Permite el acceso en aplicaciones de acceso
extremadamente limitado.
FLAT
Applications with no or little access
restrictions.
Pour applications ne présentant que peu
ou pas de contraintes d'accès.
Für alle gut zugänglichen Nietpunkte.
Adatta per applicazioni senza restrizioni di
accesso o con restrizioni di accesso limitate.
Apta para aquellas aplicaciones sin ninguna
o pocas restricciones da acceso.
'D'
Nez de pose / Mundstück /
Testata / Boquilla
Dimensions
Part No/ref
Dimension / Abmessungen /
Dimensioni / Dimensiones
B
D
Standard
07150-03003
9.14
33.02
Long
07150-04003
10.41
58.42
Limited Access
07271-08000
10.41
29.97
Standard
07271-05600
9.14
33.02
Long
07271-05900
10.41
58.42
Limited Access
07271-08100
10.16
29.97
E
4.06
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
- 74 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avtronic® Mandrel & Spring Information
Aiguilles et Ressorts d'aiguille / Nietdorne und -federn /
Mandrini e Molle / Mandriles y Muelles
Mandrel / Aiguille / Nietdorn /
Mandrino / Mandril
Spring / Ressort d'aiguille / Nietdornfeder /
Molla / Muelle
P
øH
Standard
Nose Equipment
Description
Description
Beschreibung
Descrizione
Descripción
ø
1)
nom.
2.5
2.8
as rec.
+ 0.07
+ 0.15
as rec.
+ 0.07
+ 0.15
øH
P
max.
Nez de pose Standard
Standard-Mundstück
Testata Standard
Boquilla Estándard
Mandrel
Part No/ref
Spring
Part No/ref
Standard green 1.78 3.56 07170-06025
Long Nose Equipment
Nez de pose Long
Langes Mundstück
Testata Lunga
Boquilla Larga
Mandrel
Part No/ref
07170-07025
Spring
Part No/ref
Limited Access
Equipment
Nez d'accès limité
Mundstück abgesetzt
Testata Accesso limitato
Boquilla Acceso limitado
Mandrel
Part No/ref
Spring
Part No/ref
07170-06025
1. oversize yellow 1.85 3.56 07170-06125 07150-06803 07170-07125 07150-07803 07170-06125 07150-06803
2. oversize blue 1.93 3.56 07170-06225
07170-07225
07170-06225
07170-07028
07170-06028
1. oversize yellow 2.08 3.81 07170-06128 07170-06528 07170-07128 07170-07528 07170-06128 07170-06873
2. oversize blue 2.16 3.81 07170-06228
07170-07228
07170-06228
Standard green 2.01 3.81 07170-06028
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) Standard green / Standard verte / Standard grün / Standard verde / Estándar verde
1. oversize yellow / 1. surdimensionée jaune / 1. Übermaß gelb / 1. maggiorazione giallo / 1. sobremedida amarillo
2. oversize blue / 2. surdimensionée bleue / 2. Übermaß blau / 2. maggiorazione blu / 2. sobremedida azul
- 75 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avsert® 1117 Series
Brass
English
Français
Deutsch
Italiano
Español
Short spigot
Pion court
Kurzer Schaft
Piedino corto
Espiga corta
Brass*
Tin plated**
Laiton*
Etamé**
Kupfer-Zink Legierung* Ottone*
verzinnt**
Stagnato**
Latón*
Estañado**
*: CuZn38Pb1.5 (ROHS conform)
**: ROHS conform; We recommend tin plated Avsert are installed within 24 months from the date they were produced.
Nous conseillons d’utiliser Avsert en laiton étamé sous un délai de 24 mois après la date de production.
Wir empfehlen, verzinnte Avsert innerhalb 24 Monaten nach Produktionsdatum zu verarbeiten.
Raccomandare di utilizzare i Avsert stagnati entro 24 mesi a decorrere dalla data di fabbricazione.
Recomendamos utilizar sus Avsert estañadas antes de 24 meses desde la fecha de su fabricación.
Y
L
M
2.5
øB
øA
T
Fasteners per pod
ø
nom.
M2.5 x
0.45
M3 x
0.5
Y
min.
0.8
max.
2.0
min.
2.70
max.
2.80
øB
L
øA
T
M
max.
± 0.1
max.
min.
± 0.2
5.5
3.4
8.0
36
01117-06555
6.0
3.9
8.5
34
01117-06560
4.9
9.5
30
01117-06570
8.0
5.9
10.5
27
01117-06580
9.0
5.9
11.5
25
01117-06590
5.5
3.4
8.0
36
01117-07055
3.9
8.5
34
01117-07060
4.9
9.5
30
01117-07070
8.0
5.9
10.5
27
01117-07080
9.0
5.9
11.5
25
01117-07090
4.05
7.0
2.69
6.0
0.8
2.0
3.30
3.40
Nombre de rivets
par chargeur /
Niete pro Magazin/
Rivetti per
carica-tore /
Uds./carga
4.83
7.0
3.28
Nm max.1)
0.85
1.38
Part No/ref
±1
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) As tested in 1.5 mm thick glass fibre reinforced board to specification NEMA-L11-1971 Type FR4.
Testé dans circuit imprimé fibre / époxy 15/10 selon NEMA-L11-1971 type FR4.
Getestet in 1,5 mm starker glasfaserverstärkter Leiterplatte nach Spezifikation NEMA-L11-1971 Typ FR4.
Testato in un circuito rinforzato con fibra di vetro di 1,5 mm come da specifica NEMA-L11-1971 tipo FR4.
Testado en una tarjeta reforzada con fibra de vidrio de 1,5 mm.
- 76 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avsert® 1118 Series
Brass
English
Français
Deutsch
Italiano
Español
Long spigot
Pion long
Langer Schaft
Piedino lungo
Espiga larga
Brass*
Tin plated**
Laiton*
Etamé**
Kupfer-Zink Legierung* Ottone*
verzinnt**
Stagnato**
Latón*
Estañado**
*: CuZn38Pb1.5 (ROHS conform)
**: ROHS conform; We recommend tin plated Avsert are installed within 24 months from the date they were produced.
Nous conseillons d’utiliser les Avsert en laiton étamé sous un délai de 24 mois après la date de production.
Wir empfehlen, verzinnte Avsert innerhalb 24 Monaten nach Produktionsdatum zu verarbeiten.
Raccomandare di utilizzare i Avsert stagnati entro 24 mesi a decorrere dalla data di fabbricazione.
Recomendamos utilizar sus Avsert estañadas antes de 24 meses desde la fecha de su fabricación.
Y
L
M
4.0
øB
øA
T
Fasteners per pod
ø
nom.
M2.5 x
0.45
M3 x
0.5
Y
min.
0.8
max.
2.4
min.
2.70
max.
2.80
øB
L
øA
T
M
max.
± 0.1
max.
min.
± 0.2
5.5
3.4
9.5
30
01118-06555
6.0
3.9
10.0
29
01118-06560
4.9
11.0
26
01118-06570
4.05
7.0
2.69
2.4
3.30
3.40
4.83
Nm max.1)
0.96
Part No/ref
±1
8.0
5.9
12.0
24
01118-06580
9.0
5.9
13.0
22
01118-06590
5.5
3.4
9.5
30
01118-07055
6.0
0.8
Nombre de rivets
par chargeur /
Niete pro Magazin/
Rivetti per
carica-tore /
Uds./carga
3.9
10.0
4.9
11.0
8.0
5.9
9.0
5.9
7.0
3.28
29
01118-07060
26
01118-07070
12.0
24
01118-07080
13.0
22
01118-07090
1.52
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) As tested in 1.5 mm thick glass fibre reinforced board to specification NEMA-L11-1971 Type FR4.
Testé dans circuit imprimé fibre / époxy 15/10 selon NEMA-L11-1971 type FR4.
Getestet in 1,5 mm starker glasfaserverstärkter Leiterplatte nach Spezifikation NEMA-L11-1971 Typ FR4.
Testato in un circuito rinforzato con fibra di vetro di 1,5 mm come da specifica NEMA-L11-1971 tipo FR4.
Testado en una tarjeta reforzada con fibra de vidrio de 1,5 mm.
- 77 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avsert® Nose Equipment
Ensembles de nez / Mundstücke / Equipaggiamento / Equipos de colocación
STANDARD CAM OPERATED
STANDARD
'B'
'B'
31.8
1.25
28.6
1.125
'E'
'E'
33.5
1.32
34
1.34
'D'
FLAT
FLAT
Applications with no or little access
restrictions.
Pour applications ne présentant que peu
ou pas de contraintes d'accès.
Für alle gut zugänglichen Nietpunkte.
Adatta per applicazioni senza restrizioni di
accesso o con restrizioni di accesso limitate.
Apta para aquellas aplicaciones sin ninguna
o pocas restricciones da acceso.
ø
nom.
Nose equipment with addition of a twist
cam to ease and speed up the nose jaw
opening thus the pod reloading procedure.
Ensembles de nez avec, en plus, une came
facilitant et accélérant l'ouverture du
nez de pose, et donc le rechargement en
fixations.
Zum leichteren Magazinieren haben diese
Mundstücke durch einen Drehring zu
öffnende Mundstückschnäbel.
Equipaggiamento con l'aggiunta di una
camma per facilitare e rendere più veloce
l'apertura della testata e pertanto la procedura di ricarica dell'astuccio portarivetti.
Boquillas que incorporan una leva para
facilitar y hacer más rápida la apertura de
la boquilla y el procedimiento de carga.
Nose Equipment
Nez de pose / Mundstück
Testata / Boquilla
M2.5 x 0.45
M3 x 0.5
'D'
Dimensions
Dimension / Abmessungen /
Dimensioni / Dimensiones
Part No/ref
D
E
9.14
33.02
4.06
10.41
29.97
5.08
B
Standard
07150-03003
Standard
07150-03004
Standard cam operated
07170-04600
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
Avsert® Mandrel & Spring Information
Aiguilles et Ressorts d'aiguille / Nietdorne und -federn / Mandrini e Molle / Mandriles y Muelles
Mandrel / Aiguille / Nietdorn /
Mandrino / Mandril
Spring / Ressort d'aiguille / Nietdornfeder /
Molla / Muelle
P
øH
ø
Description
nom.
Description / Beschreibung /
Descrizione / Descripción
M2.5 x 0.45
M3 x 0.5
Standard green
Standard green
øH
1.84
2.24
P
max.
Mandrel
Part No/ref
Spring
Part No/ref
3.68
4.70
07150-06003
07150-06004
07150-06803
07150-06804
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
- 78 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avlug® 1107 Series
Brass
English
Français
Deutsch
Italiano
Español
Dome head
Tête plate
Flachrundkopf
Testa tonda
Cabeza alomada
Brass*
Tin plated**
Laiton*
Etamé**
Kupfer-Zink Legierung* Ottone*
verzinnt**
Stagnato**
Latón*
Estañado**
*: BS EN 12166 CW 508L DIN 17660 CuZn37
**: We recommend tin plated parts 1107 Series are installed within 9 months from the date they were produced.
Nous conseillons d’utiliser les pièces en laiton étamé du série 1107 sous un délai de 9 mois après la date de production.
Wir empfehlen, verzinnte Niete der Serie 1107 innerhalb 9 Monaten nach Produktionsdatum zu verarbeiten.
Raccomandare di utilizzare i prodotti stagnati serie 1107 entro 9 mesi a decorrere dalla data di fabbricazione.
Recomendamos utilizar sus piezas estañadas serie 1107 antes de 9 meses desde la fecha de su fabricación.
øB
D
øB
D
M
M
L
L
øJ
øJ
ø1.6 mm
ø2.4 & 3.2 mm
No. of
grooves
ø
nom.
1.6
(1/16")
2.4
(3/32")
3.2
(1/8")
min.
max.
øB
D
L
øJ
M
max.
max.
max.
max.
max.
1.79
2.04
2.60
3.43
3.36
3.43
1.80
1.93
2.80
0.61
2.62
2.74
4.15
0.94
3.38
3.51
5.52
1.15
4.11
6.51
8.36
9.96
9.96
Fasteners per pod
Nombre de rivets par
chargeur /
cannelures
Niete pro Magazin /
Rillen
rigature Rivetti per caricatore /
Uds./carga
aros
Part No/ref
±1
62
01107-00205
42
01107-00208
2
33
01107-00310
3
28
01107-00312
3
26
01107-00412
4
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
- 79 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avlug® Nose Equipment
Ensembles de nez / Mundstücke / Equipaggiamento /
Equipos de colocación
LONG
STANDARD CAM OPERATED
STANDARD
28.6
1.125
'B'
'B'
'B'
31.8
1.25
28.6
1.125
'E'
'E'
33.5
1.32
34
1.34
'D'
Applications with no or little access
restrictions.
Pour applications ne présentant que peu
ou pas de contraintes d'accès.
Für alle gut zugänglichen Nietpunkte.
Adatta per applicazioni senza restrizioni di
accesso o con restrizioni di accesso limitate.
Apta para aquellas aplicaciones sin ninguna
o pocas restricciones da acceso.
1.6
1)
(1/16")
2.4
(3/32")
3.2
(1/8")
'D'
'E'
FLAT
Allows more penetration into applications.
Permet une pénétration supérieure dans
les applications sans autres contraintes
d'accès.
Für tiefsitzende und eng an den Bauteil­
seiten anliegende Nietpunkte.
Consente una penetrazione maggiore
nell'applicazione senza altre restrizioni di
accesso.
Permite una mayor profundidad de acceso
en aquellas aplicaciones sin restricción de
acceso en anchura.
Nose equipment with addition of a twist
cam to ease and speed up the nose jaw
opening thus the pod reloading procedure.
Ensembles de nez avec, en plus, une came
facilitant et accélérant l'ouverture du
nez de pose, et donc le rechargement en
fixations.
Zum leichteren Magazinieren haben diese
Mundstücke durch einen Drehring zu
öffnende Mundstückschnäbel.
Equipaggiamento con l'aggiunta di una
camma per facilitare e rendere più veloce
l'apertura della testata e pertanto la procedura di ricarica dell'astuccio portarivetti.
Boquillas que incorporan una leva para
facilitar y hacer más rápida la apertura de
la boquilla y el procedimiento de carga.
Nose Equipment
nom.
33.5
1.32
FLAT
TAPERED
ø
'D'
Nez de pose / Mundstück /
Testata / Boquilla
Dimensions
Part No/ref
Dimension / Abmessungen /
Dimensioni / Dimensiones
D
E
5.46
25.40
2.67
9.14
33.02
10.41
58.4
B
Standard
07154-03102
Standard
07150-03003
Standard cam operated
07170-04500
Standard tapered
07150-03103
Long
07150-04003
Standard
07150-03004
Standard cam operated
07170-04600
Standard tapered
07170-03104
Long
07150-04004
4.06
29.97
10.41
30.23
5.08
55.4
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) Installation only with handtool type 7536 / Outil de pose model 7536 seulement / Verarbeitung nur mit Druckluftgerät Typ 7536
Piazzamento solo can attrezzo modello 7536 / Colocación solo con máquina modelo 7536
- 80 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Avlug® Mandrel & Spring Information
Aiguilles et Ressorts d'aiguille / Nietdorne und -federn /
Mandrini e Molle / Mandriles y Muelles
Spring / Ressort d'aiguille / Nietdornfeder
Molla / Muelle
Mandrel / Aiguille / Nietdorn
Mandrino / Mandril
P
øH
Description
Description
Beschreibung
Descrizione
Descripción
ø
(1/16")
2.4
(3/32")
3.2
(1/8")
øH
2)
nom.
1.61)
Standard Nose Equipment
as rec.
+ 0.10
as rec.
+ 0.10
as rec.
P
Nez de pose Standard
Standard-Mundstück
Testata Standard
Boquilla Estándard
max.
Mandrel
Part No/ref
1. oversize yellow
1.30
1.43
1.93
2.06
9.01
9.67
8.97
12.14
07154-06602
07155-06702
07150-06603
07150-06703
Standard green
2.49
15.06
07150-06604
Standard green
1. oversize yellow
Standard green
Long Nose Equipment
Nez de pose Long
Langes Mundstück
Testata Lunga
Boquilla Larga
Spring
Part No/ref
Mandrel
Part No/ref
Spring
Part No/ref
07154-06802
N/A
N/A
07150-06803
07150-07603
07150-07703
07150-07803
07150-06804
07150-07604
07150-07804
all dimensions in mm / en millimètres / alle Maße in mm / in millimetri / en milímetros
1) Installation only with handtool type 7536 / Outil de pose model 7536 seulement / Verarbeitung nur mit Druckluftgerät Typ 7536
Piazzamento solo con attrezzo modello 7536 / Colocación solo con máquina modelo 7536
2) Standard green / Standard verte / Standard grün / Standard verde / Estándar verde
1. oversize yellow / 1. surdimensionée jaune / 1. Übermaß gelb / 1. maggiorazione giallo / 1. sobremedida amarillo
- 81 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
- 82 -
Please check
www.StanleyEngineeredFastening.com
for latest data and installation information.
Powerful Brands. Breakthrough Solutions.
At STANLEY Engineered Fastening we believe in seeking ways to serve our customers better. We create the future by anticipating
our customers needs. Through diversifying our product lines, creating unique assembly technologies and offering a breadth of service
to meet the demands of industry worldwide, STANLEY Engineered Fastening provides technological solutions to over 100 different
industries.
Avdel®
POP®
Avdel has been producing assembly
systems since 1936 and offers a
comprehensive range of fasteners
and tooling.
From 2mm micro rivets to 1/4"structural
rivets, POP blind rivets meet the needs of
multiple markets.
Spiralock®
Dodge®
With a focus on high-quality threaded
inserts for plastics products, Dodge has
been a leader in the fastening market
since the 1950s.
Spiralock is a technologically superior
fastening system ideally suited for
threaded joint applications subjected
to heavy shock and vibration.
STANLEY Assembly
Technologies
®
Gripco
Gripco has been providing quality nut and
threaded assembled products since 1904.
Heli-Coil®
Based on a long history that began in
the aerospace industry, Heli-Coil offers a
vast range of high-quality thread inserts.
iForm®
iForm continues a proud heritage since
1969 and represents over 40 years of
creative threaded fastener application
engineering.
www.StanleyEngineeredFastening.com
STANLEY Assembly Technologies supplies
production solutions to the global
assembly market.
Tucker®
A one-sided drawn-arc welding process
is the foundation of the Tucker No-Hole
assembly solution.
Warren®
Whether it's plastic, metal, or a
combination of the two, Warren can
design a product that will suit your
environment.
STANLEY Engineered Fastening, a Stanley Black & Decker Inc. Company has
been revolutionizing fastening and assembly technologies for a variety of
industries for more than 40 years.
For more information, please visit our website
www.StanleyEngineeredFastening.com
Quick Links:
Our locations
http://www.stanleyengineeredfastening.com/contact/global-locations
Request Information
http://www.stanleyengineeredfastening.com/econtact/request-information
Resource Center
http://www.stanleyengineeredfastening.com/resource-center
© 2014 Stanley Black & Decker, Inc., Rev. 02.2016 Avdel®, Avlug®, Avplas®, Avsert®, Avtronic®, Briv ®, Chobert®, Grovit®, NeoSpeed®, POP ®, Rivscrew ®, Speed Fastening®, and Holding your world
together ® are registered trademarks of Stanley Black & Decker, Inc. and its affiliates.
Data shown is subject to change without prior notice as a result of continuous product development and improvement policy.
Your local STANLEY Engineered Fastening representative is at your disposal should you need to confirm latest information.