385C FS Front Shovel

385C FS
Front Shovel
Engine
Engine Model
Net Power – ISO 9249 at 1,800 rpm
Net Power – ISO 14396
Gross Power – SAE J1995
Cat® C18 Diesel Engine
with ACERT™ Technology
390 kW (530 hp)
401 kW (537 hp)
412 kW (553 hp)
Weights
Operating Weight with 5.7 m3 rock
bucket, 650 mm shoes
Drive
Maximum Travel Speed
Maximum Drawbar Pull
90 600 kg
4.5 km/h
592 kN
Features
Engine
The Cat® C18 engine features ACERT™ Technology
to meet emission regulations with exceptional
performance, fuel efficiency, and proven reliability.
Environmentally Responsible Design
Quieter operation, lower emissions, and less fluid
disposal will help you meet or exceed regulations
and protect the environment.
Undercarriage and Structures
The strength of the undercarriage is a major factor
in machine durability. Combined with a tough
upper structure, the 385C FS is built to withstand
the harshest digging forces.
Hydraulics
Proportional Priority Pressure Compensated (PPPC)
system with state-of-the-art electronic control
ensures hydraulic system efficiency and productivity.
Front Linkage
The 385C FS offers excellent reach and digging
forces. Linkage keeps the bucket parallel to the
ground during penetration; the master cylinder
maintains a level bucket while raising the boom.
Operator Station
The cab provides improved visibility and comfort.
The new full-color monitor features enhanced
functionality.
Service and Maintenance
Fast, easy service has been designed in with
extended intervals for increased productivity
and reduced maintenance costs. Plus Cat dealers
offer a wide range of services to maximize your
machine's performance. Ask for details.
Contents
Engine ...................................................................3
Environmentally Responsible Design ..............4
Undercarriage and Structures .........................5
Hydraulics ............................................................6
Front Linkage .......................................................7
Operator Station ..................................................8
Electronic Control System ...............................10
Service and Maintenance ...............................11
Complete Customer Support ...........................12
Specifications ....................................................13
Standard Equipment .........................................16
Optional Equipment...........................................17
2
Designed for aggressive digging and fast cycle
times, this high-performance loading tool delivers the
dependability you need to maximize your productivity.
Developed specifically for high-production mining
applications, the 385C Front Shovel delivers high
bucket fill factors and fast cycle times to maximize
your productivity. It is designed and built to meet
the performance and reliability expectations of
Cat customers.
Engine
A combination of innovations working at the point of combustion, ACERT
Technology optimizes engine performance while meeting emission regulations.
Diesel Engine
The Cat C18, with ACERT Technology, is an 18.1 L,
six-cylinder, 390 kW (530 hp) engine with mechanically
actuated electronic fuel injection (MEUI) and overhead
camshaft. ACERT Technology provides outstanding engine
performance through advanced electronic control, precision
fuel delivery, and refined air management.
Fuel Consumption
The Advanced Diesel Engine Management (A4) controller
uses sensors throughout the engine to manage engine load
and performance. The A4 controller is the muscle behind
engine responsiveness, self-diagnostics, controlling emissions,
and fuel economy.
Fuel System
The MEUI system combines high-pressure injection and
electronic control in a single compact unit. The electronic
unit injector is an integral part of the C18 fuel system.
Computerized electronic control provides precise metering
and timing of fuel injection.
Cooling System
High-capacity, side-by-side cooling system allows operation in
ambient temperatures up to 52° C. The Electric Power Control
(EPC) controls the fan speed based on coolant temperature
and hydraulic oil temperature for optimized cooling.
Turbocharger
The C18 engine uses a water-cooled, center-section waste gated
turbocharger for improved performance. This turbocharger
controls the air volume to the cylinders and works efficiently
during low and high load conditions.
Emissions
ACERT Technology is a differentiated technology that
reduces emissions at the point of combustion. The technology
capitalizes on proven Caterpillar leadership in three core
engine systems: fuel, air, and electronics.
Cold Weather Starting Kit
The kit consists of two additional batteries, heavy-duty
harness, large capacity starting motor, and the ether starting
aid. With this kit, the excavator has the capability to start
at –32° C.
3
Environmentally Responsible Design
Cat machines not only help you build a better world,
they help maintain and preserve the environment.
Outstanding Performance
Many features are designed to provide outstanding performance, which can mean more work done in a day, less fuel consumption, and minimal impact on our environment. Low Exhaust Emissions
The Cat C18 diesel engine utilizes unique ACERT Technology to meet exhaust emissions regulations while assuring optimum fuel efficiency.
Quiet Operation
The hydraulically driven cooling fan is thermostatically controlled so the fan only runs at the speed necessary to maintain correct system operating temperatures. The result is cool, quiet operation with less disturbance to the surrounding environment.
Ozone Protection
To help preserve the earth’s ozone layer, the air conditioning unit uses only R-134a refrigerant, which does not contain harmful chlorofluorocarbons (CFC’s).
Fewer Leaks and Spills
Engine oil and encapsulated hydraulic oil filters are positioned vertically and are easy to reach to minimize
spillage. Service intervals are extended to reduce the times fluids are changed and handled. The new hydraulic oil fine filtration system attachment extends the service interval from 2,000 to 5,000 hours. Compatible with Cat HEES hydraulic bio-oil for ecologically sensitive applications. Finally, the new Cat Extended Life Coolant extends service (up to 6,000 hours) so there is less need for fluid disposal.
4
Undercarriage and Structures
Durable undercarriage absorbs stresses and provides excellent stability.
Track
New grease-lubricated track called GLT4 comes standard.
Track links are assembled and sealed with grease to decrease
internal bushing wear, reduce travel noise, and extend service
life to lower operating costs.
Track Roller Frame
A longer recoil spring improves durability and service life
of the undercarriage; an offset idler increases stability while
working over the front of the machine.
Idler Guards and Track Guides
Idler guards and center track guides to maintain track
alignment are standard. Optional two-piece full-length track
guiding guards are available.
Positive Pin Retention 2 (PPR2)
PPR2 track link is standard. PPR2 is designed to prevent
looseness of the track pin in the link, which reduces stress,
eliminates pin walking, and increases service life.
Final Drives
The three-stage reduction planetary type final drives
function as a compact drive/brake unit that delivers excellent
performance and reliability.
Carbody Design
The X-shaped, box-section carbody provides excellent
resistance to torsional bending. The upper structure weight
and stresses are distributed evenly across the full length of
the track roller frame. Robot welding ensures consistent,
durable welds.
Travel Motors
Two-speed axial piston hydraulic motors provide drive power.
Speed selection is automatic when the high-speed position is
selected. Travel motors have internal disk brakes to hold the
machine when stationary, and the motors are protected from
damage by rigid covers.
Upper Frame
The rugged main frame is designed for maximum durability.
Box-section channels improve upper frame rigidity. A new
boom foot design transfers load more efficiently with less
stress in critical areas. Also, reinforced lift cylinder and
swing drive mounts increase structure durability in rock
and quarry applications.
5
Hydraulics
Cat hydraulics deliver power and control to keep material moving at high volume.
Hydraulic System
The hydraulic system includes a three-pump system with an
independent swing circuit and a hydraulic circuit utilizing the
proven Proportional Priority Pressure Compensated (PPPC)
system. Cat electronic control and activation ensures high
hydraulic system efficiency and excellent productivity.
PPPC System
The PPPC system provides many advancements. Cylinder speed
is directly related to the operator’s movement of the joystick
from feathering to full speed. Flow to cylinders during multi­
functional operation is directly controlled by the operator and
is not dependent on loads. Also, the controller reduces pump
output to save power when joysticks are in the neutral position.
Power Management Control
The pump valve electronic controller is central to power
management control and provides highly efficient control
for the pumps, valves, and engine.
Swing Performance
The three-pump system with independent swing gives priority
to the swing circuit for strong swing acceleration and easily
controlled multi-function operation.
Component Layout
The hydraulic pumps, control valve, and hydraulic tank are
close together to minimize piping length. The swing control
valve is mounted directly on the swing motor. Main and swing
pump suction and discharge lines have large diameters, which
combine with the component layout to guarantee high efficiency.
Auxiliary Hydraulics
An auxiliary valve is standard and is used for the bottom
dump circuit. It is driven electrically based on commands
from the pump valve controller.
Front Linkage Hydraulic System
The hydraulic system for the implement consists of two boom
cylinders, a stick cylinder, two bucket cylinders, two bottom
dump cylinders, and a master cylinder.
Hydraulic Oil Filtration System
The hydraulic system features six standard filters. These filters
improve reliability, extend the life of hydraulic equipment and
hydraulic oil, boost performance, and reduce running costs.
A fine filtration system is available as an attachment.
6
Front Linkage
The 385C FS delivers higher production and efficiency to all jobs.
Parallelogram Linkage
The Cat 385C FS Front Shovel features parallelogram-type front linkage with a master cylinder.
The linkage automatically keeps the bucket parallel to the ground. This allows excellent penetration,
fast loading, and a smooth floor cleanup. The operator can concentrate on the boom and stick rather
than bucket adjustments. The master cylinder circuit automatically maintains a level bucket while
raising the boom. It aids in bucket positioning both above and below grade, eliminating constant
adjustment during the work cycle. The master cylinder arrangement also uses bucket cylinder circuit
pressure to increase the boom lifting force.
Boom
The boom is 4.6 m long and features a rigid structure with a number of steel castings. The cast-steel
portions are structured into a box to reduce the weight of the boom nose and boom foot.
Stick
The 385C FS offers a 3.4 m long stick. The stick nose and stick foot are made of cast steel. The middle
portion has a box structure fabricated with steel plates. The stick cylinder mounting bracket is reinforced
from the inside.
Bottom Dump Bucket
The recommended bucket for the 385C FS is a bottom dump bucket. It is designed for strength,
performance, and long service life.
Linkage Pin
All pins used in the 385C FS front linkage have thick chrome plating, giving them high wear and
corrosion resistance. The diameter of each pin is made as large as possible to smoothly distribute the
shear and bending loads associated with the digging and lifting forces.
7
Operator Station
Designed for simple, easy operation and comfort, the 385C FS allows
the operator to focus on production.
Cab Design
The workstation has been designed to be spacious, quiet, and comfortable for the operator, assuring
high productivity throughout the entire workday. Switches are conveniently located for easy access.
The monitor is located to provide excellent visibility and access.
Seat
The seat provides a variety of adjustments, including fore/aft, height and weight to suit the operator.
Also included are adjustable armrests and a retractable seat belt. For additional comfort, a new heated
air suspension seat is available as an attachment.
Skylight
An enlarged skylight with sunshade provides excellent visibility and good ventilation.
Hydraulic Activation Control Lever
The hydraulic activation control lever deactivates hydraulic functions during engine startup and
prevents unintentional machine operation.
8
Climate Control
Positive filtered ventilation with a pressurized cab comes
standard. Fresh air or recirculated air can be selected with
a switch on the left console.
Windows
To maximize visibility, all glass is affixed directly to the cab,
eliminating the use of window frames. A choice of fixed or
easy-to-open split front windshield meets operator preference
and application conditions.
•
50/50 split front windshield allows both upper and lower
portions to be stored in an overhead position.
•
70/30 split front windshield stores the upper portion
above the operator. The lower front windshield features
a rounded design to maximize downward visibility and
improves wiper coverage.
•
Both openable versions feature a one-touch action
release system.
•
he fixed front windshield is available in standard-duty
T
laminated glass or high-impact-resistant laminated glass.
Wipers
Parallelogram wiper, including a washer nozzle, is mounted
below the cab windshield, optimizing the operator’s viewing
area and offering continuous and intermittent modes.
Monitor
The compact, full-color monitor has functions to
display machine, maintenance, diagnostic, and prognostic
information. The angle of the monitor can be adjusted to face
the operator and prevent sun glare.
Cab Exterior
The exterior design uses thick steel tubing along the bottom
perimeter of the cab, improving the resistance of fatigue and
vibration. This design allows the FOGS to be bolted directly
to the cab at the factory or as an attachment later, enabling
the machine to meet specifications and job site requirements.
Consoles
Redesigned consoles feature a simple, functional design
to reduce operator fatigue, ease of switch operation, and
excellent visibility. Both consoles have attached armrests
and allow the height of the armrests to be adjusted.
Standard Cab Equipment
To enhance operator comfort and productivity, the cab
includes a lighter, drink holder, coat hook, service meter,
literature holder, magazine rack, and storage compartment.
The cab can be equipped with optional 12 volt converter and
up to two 12V-7 amp electrical sockets to provide additional
electrical resources.
Machine Security
An optional Machine Security System (MSS) is available from
the factory. MSS uses a special Cat key with an embedded
electronic chip for controlling unauthorized machine operation.
Product Link
The machine comes Product Link ready from the factory.
Cab Mounts
The cab shell is attached to the frame with viscous rubber
cab mounts, which dampen vibrations and sound levels while
enhancing operator comfort.
Cab Riser
To provide excellent forward visibility for truck loading and
other applications, an 870 mm cab riser is standard on the
385C Front Shovel.
9
Electronic Control System
Managing the engine and hydraulics for maximum performance is simple.
Monitor Display Screen
The monitor is a full-color 400 × 234 pixels Liquid Crystal
Display (LCD) graphic display. The Master Caution Lamp
blinks ON and OFF when one of the critical conditions
below occurs:
•
Engine oil pressure low
•
Coolant temperature high
•
Hydraulic oil temperature high
Under normal conditions or the default condition, the monitor
display screen is divided into four areas: clock and throttle
dial, gauge, event display, and multi-information display.
Clock and Throttle Dial Display
The clock, throttle dial, and gas station icon with green color
are displayed in this area.
Gauge Display
Three analog gauges – fuel level, hydraulic oil temperature,
and coolant temperature – are displayed in this area.
Event Display
Machine event information is displayed in this area along
with the icon and language.
Multi-information Display
This area is reserved for displaying information that is
convenient for the operator. The Cat logo is displayed when
no information is available to display.
Operator Gain/Response
This is used to suit the operator’s preference or application.
•
Quicker for fast response and more production
•
Slower for more precision
•
Three preset settings with 21 available settings
Electronic Joysticks
Electronic joysticks provide features not possible with
hydraulic pilot valves:
10
•
Eliminate pilot lines in cab for quieter operation
•
Adjustable gain/response
Service and Maintenance
Fast, easy service has been designed in with extended service
intervals, advanced filtration, convenient filter access, and user-friendly
electronic diagnostics.
Service Points and Intervals
Service points are centrally located with easy access to facilitate routine maintenance. Service intervals for engine oil and oil
and fuel filters extend to 500 hours to reduce maintenance costs.
Oil Sample and Pressure Ports
Oil sample and pressure ports provide easy checking of machine condition and are standard on every machine.
Hydraulic Capsule Filters
The return filters or capsule filters for the hydraulic system are located beside the hydraulic tank. The filter elements are
removable without spilling hydraulic oil.
Remote Greasing Block
A concentrated remote greasing block on the boom delivers grease to hard-to-reach locations.
Radial Seal Cleaner
Radial seal main air cleaner with precleaner has a double-layered filter element for more efficient filtration. No tools are
required to change the element.
Fuel-Water Separator
The water separator removes water from fuel, even when under pressure, and water level can be monitored in the cab.
11
Complete Customer Support
Cat dealer services help you operate longer with lower costs.
Machine Selection
Make detailed comparisons of the machines you are
considering before you buy. What are the job requirements,
machine attachments, and operating hours? What production
is needed? Your Cat dealer can provide recommendations.
Purchase
Consider the financing options available as well as day-to­
day operating costs. This is also the time to look at dealer
services that can be included in the cost of the machine to
yield lower equipment owning and operating costs over
the long run.
Customer Support Agreements
Cat dealers offer a variety of product support agreements
and work with customers to develop a plan the best meets
specific needs. These plans can cover the entire machine,
including attachments, to help protect the customer’s
investment.
Operation
Improving operating techniques can boost your profits.
Your Cat dealer has videotapes, literature, and other ideas to
help you increase productivity, and Caterpillar offers certified
operator training classes to help maximize the return on
your investment.
Product Support
You will find nearly all parts at our dealer parts counter.
Cat dealers utilize a worldwide computer network to find
in-stock parts to minimize machine downtime. You can save
money with Cat remanufactured components.
Maintenance Services
Repair option programs guarantee the cost of repairs up
front. Diagnostic programs such as scheduled oil sampling,
coolant sampling, and technical analysis help you avoid
unscheduled repairs.
Replacement
Repair, rebuild, or replace? Your Cat dealer can help you
evaluate the cost involved so you can make the right choice.
12
385C FS Front Shovel Specifications
Engine
Engine Model
Net Power at 1,800 rpm
ISO 9249
EEC 80/1269
Net Power – ISO 14396
Gross Power – SAE J1995
Bore
Stroke
Displacement
Hydraulic System
Cat® C18 Diesel
Engine with
ACERT™
Technology
390 kW (530 hp)
390 kW (530 hp)
401 kW (537 hp)
412 kW (553 hp)
145 mm
183 mm
18.1 L
• All engine horsepower (hp) are metric
including front page.
• The C18 engine meets Stage IIIA emission
requirements.
• Net power advertised is the power available
at the flywheel when the engine is equipped
with fan, air cleaner, muffler, and alternator.
• No engine derating required below 2300 m
altitude.
Drive
Maximum Travel Speed
Maximum Drawbar Pull
4.5 km/h
592 kN
Swing Mechanism
Swing Speed
Swing Torque
6.4 rpm
260 kN·m
Undercarriage
Track Width
Standard
Optional
Number of Shoes
Each Side
Number of Track Rollers
Each Side
Number of Carrier Rollers
Each Side
650 mm
750 mm
47
8
3
Weights
Operating Weight with
5.7 m3 rock bucket,
650 mm shoes
90 600 kg
Main/Travel
Circuit
Pump
Maximum Flow
at Rated Speed
Relief Valve Setting
Main
Travel
Number of Main Pumps
Swing
Circuit
Pump
Maximum Flow at
Rated Speed (total)
Relief Valve Setting
Accelerating
Number of Swing Pumps
Pilot
Circuit
Pump
Maximum Flow at
Rated Speed
Relief Valve Setting
Controls
Number of Pilot Pumps
Cylinders
Boom
Bore
Stroke
Master
Bore
Stroke
Stick
Bore
Stroke
Bucket
Bore
Stroke
Bottom Dump
Bore
Stroke
Service Refill Capacities
Closed center,
load sensing
Piston, variable
2 × 490 L/min
320 bar
350 bar
2
Open center,
load sensing
Piston, variable
450 L/min
Fuel Tank
Cooling System
Engine Oil
Swing Drive (each)
Final Drive (each)
Hydraulic System
(including tank)
Hydraulic Tank
1240 L
101 L
65 L
19 L
21 L
995 L
810 L
Cab/FOGS
• Cab/FOGS meets ISO 10262:1998.
• Standard air conditioning system contains
environmentally friendly R134a refrigerant.
Sound
Operator Sound
260 bar
1
Open center
Gear
90 L/min
• The operator sound level measured
according to the procedures specified in
ISO 6394:1998 is 76 dB(A), for cab offered
by Caterpillar, when properly installed and
maintained and tested with the doors and
windows closed.
• Hearing protection may be needed when
operating with an open operator station
and cab (when not properly maintained or
doors/windows open) for extended periods
or in noisy environment.
41 bar
1
Exterior Sound
180 mm
1415 mm
• The labeled spectator sound power level
measured according to the test procedures
and conditions specified in 2000/14/EC is
109 dB(A).
152 mm
1953 mm
220 mm
1855 mm
178 mm
1810 mm
160 mm
275 mm
13
385C FS Front Shovel Specifications
Dimensions
All dimensions are approximate.
10
4
5
1
2
11
6
9
3
8
7
Boom
4600 mm
Boom
4600 mm
Stick
1 Boom Top Height
Cab Top Height
with FOPS
3480 mm
4500 mm
Stick
4 Upper Structure Width
3480 mm
3470 mm
5 Tail Swing Radius
6 Minimum Ground Clearance
7 Overall Length
Counterweight Removed
Bucket and Stick Removed
Boom, Bucket and Stick Removed
8 Track Length
4590 mm
4660 mm
without FOPS
4520 mm
2 Engine Hood Height
without Handrail
3510 mm
with Handrail
3 Overall Width (retracted)
650 mm Shoes
750 mm Shoes
Overall Width (extended)
650 mm Shoes
750 mm Shoes
3610 mm
3400 mm
3500 mm
4160 mm
4260 mm
850 mm
14 250 mm
13 790 mm
8600 mm
7460 mm
5840 mm
9 Track Gauge Width
Extended Position
3510 mm
Retracted Position
2750 mm
10 Width over Walkways
11 Counterweight Clearance
4390 mm
1630 mm
Buckets for K Series™ Tooth System
All dimensions are approximate.
1
1 Rock
2 Rock with Spill Plate
3 Heavy Duty Rock
14
2
3
Capacity
4.6 m3
5.7 m3
6.5 m3
5.7 m3
Width
2540 mm
2670 mm
2670 mm
2670 mm
Tip Radius
2640 mm
2694 mm
2894 mm
2694 mm
Weight
9880 kg
10 400 kg
10 765 kg
10 598 kg
5.2 m3
5.7 m3
2670 mm
2670 mm
2583 mm
2694 mm
10 650 kg
11 050 kg
Working Ranges
All dimensions are approximate.
m
12
11
1O
9
8
7
7
6
5
6
5
4
3
2
1
O
3
1
2
1
4
2
3
4
12 11 10
9
8
7
6
5
4
3
2
1
0
m
M3.4JB
Stick Length
3480 mm
Boom Length
4600 mm
Rock Bucket
1 Maximum Reach
2 Maximum Reach at Ground Level
3 Maximum Level Crowd Distance
4 Maximum Digging Depth
5 Maximum Digging Height
6 Maximum Dump Height
7 Reach at Maximum Dump Height
Bucket Breakout Force* (ISO)
Stick Breakout Force* (ISO)
5.2 m3
10 350 mm
9900 mm
3920 mm
2850 mm
11 260 mm
7430 mm
5690 mm
538 kN
429 kN
*Forces shown are for 5.2 m3 rock bucket.
15
385C FS Front Shovel Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
Electrical
Alternator – 75 amp
Lights working
Cab interior
Cab mounted, two
Frame mounted
Storage box mounted, one
Signal/warning horn
Engine/Powertrain
Air filter with precleaner
Automatic engine speed control
Automatic swing parking brake
Automatic travel parking brakes
Cat C18 ATAAC with ACERT Technology,
altitude capability to 2300 m without derating
Fuel filter
High ambient cooling, 52° C capability
Side-by-side cooling system with separately
mounted AC condenser and variable
speed fan
Two speed travel
Water separator, with level indicator,
for fuel line
Guards
FOGS (Falling Object Guard System)
including overhead and windshield guards
Heavy duty bottom guards on upper frame
Heavy duty swivel guard on undercarriage
Heavy duty travel motor guards
on undercarriage
Idler and center section track guiding guards
Quarry application (cylinder guard,
swing motor and drive guard)
16
Operator Station
Adjustable armrest
Air conditioner, heater and defroster
with automatic climate control
Ashtray and 24 volt lighter
Beverage/cup holder
Cab riser 870 mm
Capability to install 2 additional pedals
Coat hook
Console mounted electronic type joysticks
with adjustable gain and response
Electrical provision for seat heater
EU sound criteria package
Floor mat, washable
High resistant cab window
Instrument panel and gauges with full color
graphical display, start up level checks
Joystick, thumb wheel modulation joystick for
use with front shovel bottom dump bucket
Literature compartment
Neutral lever (lock out) for all controls
Positive filtered ventilation, pressurized cab
Rear window, emergency exit
Retractable seat belt 51 mm width
Sliding upper door window
Stationary skylight (polycarbonate)
Storage compartment suitable for lunch box
Sunshade for windshield and skylight
24V radio ready
(harness, 2 speakers, flexible type antenna)
Travel control pedals
with removable hand levers
Utility space for magazines
Windshield wipers and washers
(upper and lower)
Windshield one-piece high impact resistant
Undercarriage
650 mm clipped double grouser shoes,
standard length, variable gauge
Grease lubricated track GLT 4
Hydraulic track adjusters
Steps – four
Other Standard Equipment
Boom and stick reducting valve
Cat branded XT hoses
Cat batteries
Cat one key security system with locks
for doors, cab and fuel cap
Cat walks – left side and right side
Cross-roller type swing bearing
Heavy lift mode
High pressure cut off
Hydraulic circuit for bottom dump bucket
Mirrors – left and right
S·O·SSM quick sampling valves
for engine oil and hydraulic oil
Steel firewall between engine
and hydraulic pumps
Wiring provisions for Product Link,
Auto-lube System and lighted beacon
385C FS Front Shovel Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
Front Linkage
Boom 4600 mm
Stick 3480 mm
Buckets
(see Buckets for K Series™ Tooth System)
Tips, cutting edge protection segments,
and sidebar protector
Track
Double grouser shoes 750 mm
Guards
Track guiding guards
Two piece full length
Miscellaneous Options
Auto-lubrication device including boom
and stick (not bucket)
Bio-degradable hydraulic oil (saturated,
synthetic ester, 5,000 hours change interval)
Converters, 7 amp – 12V
– One
– Two
Counterweight removed device
Electric refueling pump without shut off
Fast fill engine oil system
Fast fill fuel system
Fine filtration filter
Hydraulic tank shut-off valve
Jump start terminals
Oil quick change system
Radiator screen
Reversible cooling fan
including protective screen
Starting aid for cold weather with ether
Stick lowering control device
Travel alarm with cut off switch
Operator Compartment
Lunch box storage with lid
Machine security system with
programmable keys
Radio
AM/FM radio mounted in right hand
console with antenna and two speakers
Radio ready mounting at rear location
including 24V to 12V converter speakers,
antenna
Seat
Adjustable high-back seat
with mechanical suspension
Adjustable high-back seat
with air suspension
Adjustable high-back heated seat
with air suspension
Straight travel pedal
17
Notes
18
19
385C FS Front Shovel
For more complete information on Cat products, dealer services, and industry solutions,
visit us on the web at www.cat.com
© 2011 Caterpillar Inc.
All rights reserved
Materials and specifications are subject to change without notice. Featured machines
in photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow”
and the “Power Edge” trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.
20
AEHQ6354 (12-2011)
(Asia Pacific)