installation instructions for your mazda cx-9 second

THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liner is custom molded to fit your Mazda CX-9. The liner is made to take the place of your factory
floor mat. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liner.
However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest way
to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor
All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.
INSTALLATION INSTRUCTIONS FOR YOUR MAZDA CX-9 SECOND
SEAT FLOOR LINER
FRONT OF VEHICLE
INSTALLATION FOR USE WITHOUT 3RD ROW SEAT ACCESS
BEFORE INSTALLING YOUR HUSKY FLOOR LINER FIRST MAKE SURE THE FRONT ROW SEATS ARE MOVED
TO THEIR MOST FORWARD POSITIONS. THEN, MOVE THE SECOND ROW SEATS TO THEIR MOST REARWARD
POSITIONS. WITH THIS COMPLETED, INSERT LINER INTO VEHICLE WITH THE LINER TILTED DOWN IN THE
BACK SO THAT THE REAR EDGE OF THE LINER CAN BE TUCKED UNDERNEATH THE SLIDE RELEASE
HANDLE OF THE SECOND ROW SEAT. THE LINER MUST BE POSITIONED UNDER THIS HANDLE TO FIT
PROPERLY.
INSTALLATION FOR USE WITH ACCESS TO 3RD ROW SEATS
TO ALLOW THE SECOND ROW SEATS TO SLIDE FORWARD AND THEREBY GAIN 3RD ROW SEAT ACCESS, YOU
WILL NEED TO TRIM YOUR LINER AS SHOWN (SEE FIGURE 1 AND FIGURE 2 ON THE BACK OF THIS PAGE).
ONCE LINER IS TRIMMED, FOLLOW INSTRUCTIONS ABOVE TO INSTALL LINER IN VEHICLE.
VEHICLE WITH THE LINER TILTED DOWN IN THE BACK SO THAT THE REAR EDGE OF THE LINER CAN BE
TUCKED UNDERNEATH THE SLIDE RELEASE HANDLE OF THE SECOND ROW SEAT. THE LINER MUST BE
POSITIONED UNDER THIS HANDLE TO FIT PROPERLY
6359_Installati…Instruction.doc
12/15/2006
1
2
3
TO ALLOW THE SEAT SLIDES TO MOVE FORWARD, TRIM AWAY THE MATERIAL FROM THE THREE
AREAS SHOWN ABOVE. USE THE MOLDED IN EDGES AS YOUR TRIMMING GUIDES
6359_Installati…Instruction.doc
12/15/2006