Mechanical Power Transmission Solutions

Hyspecs Transmissions Ltd
Mechanical Power Transmission
Solutions
Introduction
HYTRANS (Hyspecs Transmissions Ltd) is a division of
Hyspecs Holdings Ltd.
Hyspecs Holdings Ltd is made up of:
•
•
•
HYTRANS (Hyspecs Transmissions)
HYSPECS (Hydraulic Specialties North & South Island)
HYTECH (Hyspecs Technologies)
Our locations
We employ 42 people
across our branches in
Auckland & Christchurch,
enabling national
coverage.
10 sales territories
covered by our sales
staff.
Our home bases
Auckland
9 Lady Ruby Drive
East Tamaki
Ph: 09 274 9985
Fax: 09 274 4441
Christchurch
40 Durham Street
Sydenham
Ph: 03 366 1872
Fax: 03 366 1431
in a nutshell
•
•
•
•
•
HYTRANS is a 100% New Zealand owned and operated
company. Our main focus is to provide “engineered sales
solutions” & transmission advice
Is located in Auckland and Christchurch, within the HYSPECS
premises
Exclusive NZ rights to Comer Planetary Drives (SOM)
Our full line of Planetary Drives fits perfectly with existing lines
of HYSPECS electric or hydraulic motors and other hydraulic
accessories
Wide range of transmission accessories including transmission
chain & sprockets, conveyor chain, vee belts and taper lock
pulleys, timing belts, shaft couplings and shaft locking bushes,
AC motor controllers, conveyor components, clutches and
brakes, modular belting, oil coolers & worm boxes
in a nutshell
•
•
•
HYSPECS is a 100% New Zealand owned and operated
company. Hyspecs was formed in 1972 as an alternative to the
single brand, multi-national suppliers in existence at the time.
We offered then, as we do now, an extensive range of
hydraulic equipment.
Stocked product lines range from simple hand or gear pumps,
geroler motors, manual control valves, through to custom
cartridge manifolds and load sensing equipment with electroproportional and servo valving. Product is sourced from around
the world through selected well-known, quality companies.
Dedicated industrial hydraulic project engineer.
in a nutshell
•
•
HYTECH is a 100% New Zealand owned and operated
company. Hytech was established in 2002 to fulfil a growing
industry requirement for timely, small run, CNC milled
aluminium and steel components.
Hytech’s primary market is the hydraulic manifold industry.
Hytech manufactures and stocks a full line of standard
hydraulic manifolds. With the aid of in-house designers,
custom aluminium and steel manifolds are also designed and
produced. Custom manifolds offer multiple function, layout,
port and cavity options, to suit your specific requirements.
Assembly Centres
•
•
•
•
•
•
•
•
•
Purpose built centres
located in both Auckland
and Christchurch
branches
Test bench facilities for
hydraulic and electric
motors
Gearbox repair service
Hydraulic motor and ram
repair service
Workshop services
include:
Full machining services
Boring and keyway
service
Taper lock bore
Shafts made
Why choose HYTRANS?
•
•
Experienced staff to offer the right solution
Power Transmission Solutions - give us your power
transmission problems and we will provide you with the
solution - right to the driven shaft
• Total drive system advice - Industrial - Marine - Mobile
• We have the total industry experience to offer the right
product for the application
• National coverage - 9 Sales Engineers on the road,
supported by qualified internal staff & product specialists
• Assembly centres in both Auckland & Christchurch. We
can deliver to most parts of the country – Overnight
• Hydraulic test bench & electric test facilities
• Large stock holding and 24/7 technical sales and service
backup
• Dedicated service division
Hyspecs Transmissions Ltd
PRODUCT SHEETS
Planetary drives
Hydraulic Input
Brake
Connection Flange
Reduction Kit
Electric Input
SAE Input
Output
Free Input
Worm Input
Planetary drives
CPC
•
•
•
•
PC
MC
Comer planetary drives are a compact modular
design, fully reversible, final drive system,
designed specifically for use with hydraulic and
electric motors
Flexible range of ratio's combinations & mounting
configurations - foot, flange, shrink disc
Free input and worm box mounts with spindle
and wheel mounts available on indent.
Ratios from 3.55:1 & stacking to five stages
MS
FS
Gearboxes: Comer Industries
•
Full range up to 650000 Nm
Mounting configurations:
• Inline
• Right angle
• Shaft mount
• Foot mount
• Flange mount
• Hydraulic input
• Electric input
• Free input shaft
• Splined input shaft
• Worm box input
• Special harsh environment
coatings and protection
CAD Drawings
•
CAD drawings can be created and printed as
required.
Electric motors
•
•
•
•
•
•
•
•
Hengshui 3-phase
electric motors ranging
from 0.12 to 315 kW
4-pole (approx 1440 rpm)
with 2,6, and 8 pole
available options
Foot and Flange mounts
Motors exceed
requirements of AS/NZ
1359:2004
Many different motor
accessories and options
available; Brake, Vector,
Servo and Stainless
motors
Variable speed drives
Soft starters
Access to other brands
to maintain plant
standards
Hydraulic motors
•
•
•
Low speed, high torque
Poclain radial piston
motors and
geroler/gerotor CharLynn motors
High speed, low torque
Eaton piston motors and
gear motors by Galtech
Brake options available
on all motors
PGR/PGW Wheel Output
•
•
•
Suitable for driving rubber tired or tracked self-propelled
vehicles
Single or 2 stage reduction model with transmission
torques up to 16000 Nm
Integrated parking brake
PG PR Slew & Yaw Drives
Reduction Boxes - Motovario
•
•
Variators
Fractional H.P. and
smaller power
reduction boxes
Hydraulic Input Worm Box
•
•
Hollow or male output shaft
Input designed to fit standard SAE motors
Rossi Gearboxes
•
•
•
Shaft Mount
90 Degree
Inline foot mount
Brakes
Ausco & Fairfield Brakes
Comer
Failsafe Brake
Caliper Brake
Clutches
•
•
•
•
•
Electromagnetic
Manual
Hydraulic
Pneumatic
Cone Clutches
Specialist Segmented Sprockets
•
Steel or plastic
Shaft Couplings (Taper Lock)
•
From 72 Nm – 7200 Nm (max)
Tyre Couplings
•
•
Up to a maximum torque of 42740 Nm
Max Dynamic tyre couplings
Chain & Rigid Couplings
•
•
Chain Coupling - up to 13740 Nm and 140 mm
maximum bore size
Parallel-keyed rigid coupling (single or double split)
Gear and Spider Couplings
Taper Lock Pulleys, Bushes &
Vee Belts
•
•
•
•
•
•
•
•
•
Imperial bore sizes 3/8” – 5”
Metric bore sizes 9mm – 125mm
Pulleys in SP2, SPA, SPB, SPC sections with larger on
request
Weld in hubs up to size 5050
Classical sections Z, A, B, C, D
Wedge sections SPZ, SPA, SPB, SPC
Raw edge XPZ, XPA, XPB, XPC
Variable speed belts
Joinable vee belting
Shaft Locking Bushes
•
•
Flanged up to 130 mm bore
Non-flanged up to 250 mm bore
Synchronous Drives
•
•
•
•
•
•
•
Trapezoidal pitches XL,
L, H, XH
H.T.D 3M, 5M, 8M, 14M
Linear HTD 8M, HTD
14M
Poly chain GT2 8mm,
14mm
Metric T2.5, T5, T10
Double sided T5 & T10,
AT5 & AT10
Custom made pulleys on
request
White PU Belting
•
•
•
White polyurethane
belting
Numerous belt section
options available
Numerous profile options
available
Transmission Chain & Sprockets
•
•
•
BSS, ASA, Double pitch
Sprockets: Full range Simplex, Duplex Triplex plus
specials on request
Lubricators
Conveyor & Mill Chains
•
•
•
Conveyor chains (including special
attachments)
Agricultural chain & sprockets
Mill chain – wide and narrow series
Troughing Rollers / Idlers
Conveyor Components or
Complete Systems
Modular Plastic Belting
•
•
•
Options including; flush top, raised top, perforated top
and low back pressure (side flexing and straight
running)
Side flexing and straight running table top chain
Many options of tracking guides
Table Top Chain & Profiles
Emmegi Oil Coolers
•
•
•
•
•
•
Air/oil and sea/fresh
water/oil coolers
Oil flow to 280 l/min
Offline coolers with
own electric motor
and pump
Bypass check
valves for
overpressure
protection
12/24 VDC, single
and 3-phase AC
electric motors
IP 65 rating
available