Universal Scanner

 The image cannot be displayed. Your computer may not have enough memory to open the image, or the image may have been corrupted. Restart your computer, and then open the file again. If the red x still appears, you may have to delete the image and then insert it again.
Universal Scanner
Trovan LID560-MULTI
User Guide and Warranty
Information
Contents
The petDetect Universal Scanner
1
Fitting the Battery
2
Operating the Scanner
2
Correct Scanning Technique
3
Scanner Read List
4
Scanner Troubleshooting
5
Warranty
5
Detect Universal Scanner
universal scanner can read all microchips used in animal identification, regardless of where the microchip
microchip it will read are:
ISO FDX-A
ISO FDX-B
FECAVA
Trovan ID-100 Unique
AVID Encrypted
PSK1
PSK2
ASK 64gb
d, the microchip ID will be shown on the 2 x 16 character display, which has backlighting. The scanner has
epending on the type of microchip detected. Included in the box are your scanner, a battery and a belt cli
tective case for your petDetect Universal Scanner on our website for added protection.
attery life, the scanner will automatically switch off after 30 seconds of non-use.
an overview of your petDetect Universal Scanner.
Display
Scanning Hot Spot
(For illustrative purposes only)
Power/ Scan Button
Battery Cover
he battery
equires one 9v alkaline battery. To fit or remove a battery, slide the cover on the rear of the scanner dow
e. It should come away with ease. Fit the battery ensuring that the positive terminal is correctly positione
before use.
crochip is located within the allotted time a ‘No Code’ message will display. To continue scanning, press th
ore repeating step 2.
o turn the beeping off via the programming menu. See page 5 for details.
ain the animal being scanned has a microchip and the scanner fails to locate one, repeat scanning a second
ll fail to get a reading, please go to the Scanner Troubleshooting section on page 5 for further advice.
ocate a chip in an animal you are led to believe has not already been microchipped or has more than one
ATELY and contact Petlog on +44 (0) 1296 336 579 for advice.
Scanning Technique
operly assess whether an animal has a microchip we recommend the technique listed below. Microchips h
o migrate to many different areas so correct and thorough scanning every time is crucial to ensure animal
more than one microchip or deemed strays and rehomed when this is not the case.
ocation of microchips in companion animals is just under the skin directly between the shoulder blades. A
scanned in the first instance.
e scanner over the surface of the animal so the scanning hot spot on the reverse of the scanner is in conta
owly. The scanner needs time to transmit the signal and the microchip needs time to respond. The scann
ocked from side to side during scanning; this action helps maximize the potential for success by allowing fo
n in chip positioning.
crochip isn’t present in the usual area (A) then the rest of the animal should be thoroughly scanned. Scan
pattern down the back of the animal starting from the left shoulder (B),
he slow S pattern on both sides of the animal from head to tail (C and D.)
ochip is still not found, slowly scan the chest and abdomen using the same S pattern from head to tail.
can be adapted to suit the type of animal you are scanning for a microchip provided you always scan slow
Read List
Universal Scanner read list shows the types of microchip your scanner is set to find. The factory standard
rd, ISO FDX-B, Fecava and Avid Encrypted. To edit the read list you must access the programming menu.
w:
he scanner on by pressing the power/scan button.
e button 5 times with a maximum interval of 0.3 seconds between presses. On the 5th press, hold down th
ong beep. The scanner will then remove it’s current read list.
proximately 5 seconds, the scanner will emit a second long button and show ‘release button’. You can no
nner will the cycle through types of microchips it is capable of finding. They will display for 4 seconds each
he microchip type to your read list you must press the button.
cling through the types once, the scanner will display ‘Alarm off’. Press to turn off the beeping sound whe
nner will now turn off. The new settings are applied and you can use your scanner as normal.
Troubleshooting
ears not to be working correctly then we recommend checking the following things:
BATTERY LEVELS IN THE SCANNER CAUSE MOST NON-READS
he scanner is fully charged, or a compatible battery is in place - remember Alkaline only!
he read list is set to recognize the right types of microchip.
or any damage to the scanner.
he above environmental conditions are being met i.e. you aren’t scanning in extreme cold, the scanner isn
anning right next to electrical equipment. If required remove any metal collars/tags/harnesses from the an
unction with a test microchip.
ou are scanning slowly and are holding the scanner against the animal’s fur/skin. Follow the scanning proto
d already.
anner still isn’t picking up a microchip, then we recommend the animal is scanned with another scanner; p
l one in case it has a foreign or encrypted microchip in place.
y
Scanner is guaranteed against defects in materials and workmanship, under normal use, for a period one
petDetect
c/o Biotope Ltd
PO BOX 60
Winchester
SO23 9XN
Telephone: +44 (0)1962 813554
Fax: +44 (0)1962 877412
Web: www.pet-detect.com
Email: [email protected]