Lyndex Std Catalog - Dyke House Company

Transcription

L
Y
N
D
E
X
N
I
K
K
E
N
S
T
A
N
D
A
R
D
P
R
O
D
U
C
T
C
A
T
A
L
O
G
STANDARD PRODUCT CATALOG
www.lyndexnikken.com • 800-543-6237
CAT2004-STD
STANDARD PRODUCT CATALOG
Best of all, the quality that you’ve come to expect from
Lyndex is further reinforced through the addition of
Nikken products.
Complementing this extensive inventory is expanded
support. From Lyndex-Nikken, you are assured of the
highest levels of knowledge-based engineering and
service.
Over the years, Lyndex’s product line has evolved to
include a vast selection of toolholding and accessories.
Commitment of quality products and excellent service
has earned Lyndex industry-wide attention.
Partnering with Nikken has further enhanced opportunities for Lyndex and Lyndex customers.
Nikken Kosakusho Works, Ltd. has dominated Japan’s
toolholding market almost since its inception in 1953.
Established by Mr. Matsumoto, a top name in Japan’s
machine tool market, Nikken is committed to technological advancement and customer satisfaction.
Today, Nikken annually produces over 300,000 toolholders, 2,500 CNC rotary tables and 250,000 reamers.
A global company, Nikken’s sales and technical service
network consists of over 600 employees worldwide.
Through joining forces with Lyndex, Nikken will further
establish its presence in the U.S. toolholding marketplace.
STUB, BORING, BLANK
Lyndex Corporation began in 1979 as a supplier of 5C
and R8 collets. The company was founded with a
vision of becoming the industry’s premier supplier of
quality toolholders.
TAP HOLDERS
DRILL CHUCKS
Superior quality and technology, as well as selection
and service, make Lyndex-Nikken your single source
for toolholders and machine tool accessories.
END MILL HOLDERS
From the joining of these two great companies emerges
an even greater company. Lyndex-Nikken boasts a
broader product line, more service personnel and a
higher degree of engineering support and technology.
SHELL MILL HOLDERS
Though only recently established, Lyndex-Nikken
already has a long history of success. Founded nearly
three decades ago, Lyndex Corporation set the standard
for quality toolholding in the U.S. Nikken, on the other
hand, was established in Japan over a half century ago
and has a rock solid reputation as the number one manufacturer of toolholders and machine tool accessories.
COLLET CHUCKS
Lyndex-Nikken. Together, Lyndex and Nikken represent
the best of both worlds: Extreme Quality and Advanced
Technology.
MILLING CHUCKS
LYNDEX-NIKKEN
1
LYNDEX-NIKKEN
MILLING CHUCKS
Advanced Products
Standard Products
Our complete range of quality-driven toolholding
solutions are designed to meet your strictest requirements. Our extensive line features the industry’s most
trusted ER Collet Chucks, End Mill Holders and Tap
Holders.
CNC Rotary Tables
Our complete line of CNC Rotary Tables are known
worldwide for their wear-resistance, rigidity and highspeed rotation. Ion-nitrided worm wheels and carbide
worm screws reduce friction and wear by up to 8 times
(compared to common phosphorous bronze and aluminum bronze worm construction).
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
Maximize the potential of your machine tools with our
technologically superior tooling. Our advanced line
includes High-Speed SK, Insider Collet Chucks, Ultralock Milling Chucks, our HSBalance™ tooling line as
well as productivity-driven AngleHeads and HiSpinners.
2
Hole Making
Featuring the ZMAC, our world-class boring heads are
extremely rigid and precise. A shoulder support and
locking screw (located closer to the cutting edge)
ensures stable operation. The dial ring and cartridge
are precision-matched for improved accuracy.
Live Tools
SHELL MILL HOLDERS
END MILL HOLDERS
Our Alps and Benz line of live tooling meets the industry’s demand for superior technology, precision and
selection. Choose from standard or custom designs in
axial or radial configurations. Various shank tooling
and collets are available.
MILLING CHUCKS
LYNDEX-NIKKEN
Presetters
COLLET CHUCKS
Presetters from Elbo Controlli reduce valuable tooling setup time. Our E238, E348, E450 and E458 presetters maximize accuracy and ease of operation, are solidly constructed, include an intuitive icon-driven control system and feature a specially designed C-MOS camera system.
Nikken Worldwide
3
1
4
DRILL CHUCKS
5
2
6
7
8
10
9
Japan
1.
2.
3.
4.
5.
6.
USA
UK
France
Spain
Sweden
Germany
Lyndex Nikken
Nikken Kosakusho UK
Procomo France S.A.
Cutting Tool S.L.
Nikken Scandinavia AB
Nikken Deutschland
Tel:
Tel:
Tel:
Tel:
Tel:
Tel:
Nikken Kosakusho Works Tel: 072-869-5820
(847) 367-4800
(01709) 366306
01.69.19.17.35
(943) 494144
(031) 519855
0049 (0) 6142/55060-0
7. Switzerland
8. Italy
9. Turkey
10. Korea
11. China
Nikken Switzerland AG
Vega International
Nikken Turkey
Korea Nikken LTD.
Nikken China
Tel:
Tel:
Tel:
Tel:
Tel:
(041) 748-5000
(011) 9456330
(0216) 464-0620
(032) 763-4461
(021) 6210-2506
STUB, BORING, BLANK
TAP HOLDERS
11
3
Nikken’s Osaka-Daito Factory
Open in 2003, Nikken’s state of the art production facility sits on 12 acres and includes 237,000 square feet of
manufacturing space and 26,000 square feet of office space.
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
LYNDEX-NIKKEN
Heat Treatment
TAP HOLDERS
Central Control
STUB, BORING, BLANK
Material House
4
Factory No. 1
Turning
Machining
Grinding
Assembling
Inspection
Factory No. 2
Grinding
Assembling
Inspection
Warehouse
Office
Management
Sales
Design/Development
Financial
Tool Grinding Line
DRILL CHUCKS
Carbonizing and Sub-Zero Treatment
Ion Nitriding
TAP HOLDERS
NC Lathe Line
STUB, BORING, BLANK
COLLET CHUCKS
Machine Center Line with 3Lock Spindles
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
LYNDEX-NIKKEN
5
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
LYNDEX-NIKKEN
Lyndex-Nikken Part Numbers
We continue to utilize our original system for the standard products (shown below) and have incorporated Nikken’s
part numbers for their product.
The Taper Descriptions are self-explanatory with the addition of:
C = Milling Chucks
SK = SK / LSK
MMC = MMC / Insider
Nikken Example: CAT40-GSK25C-90
SZF = Bullseye
VC = VC Holder
CAT40 - GSK25C - 90
FMD = Face Mill Adapter
Taper High Speed SK High Pressure Gage Line
MCAT or MBT = 3Lock Taper
Coolant Thru
NPU = Drill Chuck
MOL = Fluid Head - Side Lock Style
MOK = Fluid Head - SK Collet Style
MOC = Fluid Head - Milling Chuck Style
G in conjunction with C or SK = High Speed
F = Din 69871 FormB (Flange Coolant)
C in conjunction with SK = High Pressure Coolant
Here's how we derive our Lyndex toolholder part numbers.
Reviewing this numbering system will help you to quickly identify Lyndex toolholders in this catalog.
The example, item C5006–0500B, is a CT50 taper 1/2" balanceable end mill holder.
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
C 50 0 6 – 0500 B
6
Taper Type
Taper Size
B = BT
C = CAT
HSK = HSK
M = Morse Taper
N = NMTB
R = R8
S = Straight
W = Weldon
If N/C tooling,
taper sizes are
directly noted (30,
40, 50, 63A, etc.)
Other tooling is
shown as follows:
10
12
15
75
=
=
=
=
1"
1-1/4"
1-1/2"
3/4"
M02 =
M03 =
M04 =
MT#2
MT#3
MT#4
Imperial (inch) sized collets are
shown with item number suffixes
denoting 64ths of an inch:
i.e.- Item 100–032 is a 1/2"
100TG collet
Metric sized collets are shown with
item number suffixes denoting its
maximum capacity in thousandths
of an inch:
i.e.- Item E25–196 is a 4 - 5mm
ER25 collet
Holder Length
S = stubby length
0 = std. length
1 = long
2 = ext. length
3 = extra ext.
Holder Type
1
2
3
4
5
6
7
8
=
=
=
=
=
=
=
=
Shell Mill
Stub Mill
Jacobs Taper
Morse Taper
Tap
End Mill
Collet Chuck
Blank Bar
Specialty holders are noted as
follows:
BH = Boring Head
F1 = Face Mill
FH = FlexHead™
HS = HiSpinner®
RA = RiteAngleHead™
R5 = Rigid Tap
FA = FixedAngleHead™
SF = Shrink Fit
Holder
Size/Style
Holder size is
shown in
thousandths:
0125 = 1/8"
0500 = 1/2" etc.
Collet chucks are
designated as:
0008 = ER8
0011 = ER11
0016 = ER16
0020 = ER20
0025 = ER25
0032 = ER32
0040 = ER40
0250 = 25TG
0500 = 50TG
0750 = 75TG
1000 = 100TG
1500 = 150TG
All specifications listed in this catalog are subject to change without notice.
Special
Special notations
may apply:
A
B
(C)
DIN
= Aerospace
= Balanceable
= Coolant
= DIN Coolant
SHELL MILL HOLDERS
CT Taper Shell Mill Holders
CT Taper Face Mill Holders
BT Taper Shell Mill Holders
BT Taper Face Mill Holders
HSK Shell Mill Holders
HSK Face Mill Holders
NMTB Taper Shell Mill Holders
NMTB Taper Face Mill Holders
R8 Shell Mill Holders
Replacement Parts
COLLET CHUCKS
ER Series
CT Taper Collet Chucks
CT Extended Length Collet Chucks
BT Taper Collet Chucks
24-26
27
28-31
32
33
34
35
36-37
37
38
39
40
41
41
42
43
43
44
44
45-54
46-47
47
48-49
49
50
51
52
52
53
54
55-108
56-57
58
59-60
DRILL CHUCKS
Integral Keyless Drill Chucks
CT Taper
BT Taper
NMTB Taper
HSK
Straight Shank
Replacement Chucks & Wrenches
Jacobs Taper Holders
CT Taper
BT Taper
NMTB Taper
R8 Taper
Jacobs® Drill Chucks
Morse Taper Holders
CT Taper
BT Taper
NMTB Taper
R8 Taper
99
100
101
101
102-104
105
106
107-108
END MILL HOLDERS
85-86
87
88
88
89
89
90-96
97
98
SHELL MILL HOLDERS
CT40 End Mill Holders
CT50 Aerospace End Mill Holders
CT Extended Length End Mill Holders
BT30 End Mill Holders
HSK63A End Mill Holders
HSK100A End Mill Holders
NMTB30 End Mill Holders
R8 End Mill Holders
Straight Shank End Mill Holders
MT End Mill Holders
Replacement Set Screws
23-44
60-61
61
62
62
63-79
80-82
83
84
109-116
110
110
110
110
111
111
112
112
113
113
114
115
115
116
116
DRILL CHUCKS
END MILL HOLDERS
10-12
13
14
15
16
17-20
21-22
HSK Collet Chucks
NMTB Taper Collet Chucks
R8 Collet Chucks
Collet Extensions
Collets - Standard & Coolant
Tap Collets - Standard & Coolant
Collet Racks & Kits
Replacement Nuts & Wrenches
TG Series
R8 Collet Chuck
SS Collet Chucks
MT Collet Chucks
Collets - Standard & Coolant
Collet Racks & Accessories
Replacement Nuts & Wrenches
DA Series
Collet Extensions
Collets & Sets
Collet Racks & Kits
Replacement Parts
Collet Dimensional Data
TAP HOLDERS
Technical Characteristics and Features
CT Taper Ultra-Lock™
BT Taper Ultra-Lock™
NMTB Taper Ultra-Lock™
HSK Taper Ultra-Lock™
Milling Chuck Collets
Milling Chuck Collets Accessories
9-22
STUB, BORING, BLANK
MILLING CHUCKS
COLLET CHUCKS
Table of Contents
MILLING CHUCKS
LYNDEX-NIKKEN
7
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
LYNDEX-NIKKEN
8
Table of Contents (continued)
TAP HOLDERS
Standard Tap Holders
CT Taper - Tension/Compression
CT Taper - Rigid
BT Taper - Tension/Compression
BT Taper - Rigid
NMTB Taper - Tension/Compression
HSK Taper - Tension/Compression
HSK Taper - Rigid
Straight Shank - Tension/Compression
Weldon Shank - Tension/Compression
Weldon Shank - Rigid
MT - Tension/Compression
Coolant Thru Tap Holders
CT Taper - Tension/Compression
CT Taper - Rigid
BT Taper - Tension/Compression
BT Taper - Rigid
Weldon Shank - Tension/Compression
Weldon Shank - Rigid
Tap Collets
Positive Drive -Standard & Slotted
Positive Drive - ISO/DIN/JIS
Positive Drive - Collet Sets
Torque Control - Standard & Slotted
Torque Control - Collet Sets
Torque Control - ISO/DIN/JIS
Tap Collet Reducers
Tap Collet Racks & Wrenches
Tap Collet Dimensional Data
STUB, BORING, BLANK
Stub Mill Holders
CT Taper
BT Taper
NMTB Taper
R8 Taper
Replacements Nuts & Spacers
Boring Head Holders
CT Taper
BT Taper
NMTB Taper
Blank Bars
CT Taper
BT Taper
NMTB Taper
HSK Taper
117-142
118
118
119
120
120
121
122
123
123
124
124
125
125
126
126
127
127
128-130
131-133
134
135-137
137
138-140
141
141
142
143-148
144
144
145
145
146
147
147
147
148
148
148
148
R8/5C/3J/16C COLLETS
R8 Collets
R8 Inch Collets & Sets
R8 Metric Collets
R8 Racks
5C Collets
5C Round Collets & Sets
5C Hex Collets
5C Square Collets
5C Step Collets
5C Stops & Blocks
5C Rack & Wrench
3J Collets
3J Round Collets
3J Hex Collets
3J Square Collets
3J Stop & Wrench
16C Collets
16C Round Collets
16C Hex Collets
16C Square Collets
16C Stop & Wrench
RETENTION STUDS
Dimensional Information
CT Taper
BT Taper
ACCESSORIES
ToolJaws™
Tightening Fixtures
PointFinders™
XYZSetters™
ZeroSetters™
FlashPoint™
Spindle Wipes
Tool Wagon
TECHNICAL SECTION
Technical Data
149-160
150
151
151
152-153
154
154
154
155
155
156
157
157
157
158
159
159
159
161-164
162
163
164
165-172
166-167
167
168
169
169
170
171
172
173-182
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
MILLING CHUCKS
9
Nikken Ultra Lock Milling Chuck
Sub Zero Treatment
Nikken Toolholders are
all subjected to ultra low
temperature treatment of
-90ºC after carburizing.
This treatment removes
residual austenite to
prevent deformation for
many years
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
MILLING CHUCKS
10
Chucking Torque and Durability
All of the Ultra Lock Milling Chucks incorporate the
multi-roller system including 140% more needle rollers
than the other imitations. In addition, The retainer is
not made of phosphorus bronze, but of a special steel
which will never break.
Nikken
Multi-Roller
System
Nikken’s Needle roller bearings are arranged in perfect order and density to allow for even gripping
torque and smooth operation
Imitation
Multi-Roller
System
Uniform Chip Size
Effects of Internal Slots
Stable Milling with Stopper
Internal slots allow for no decrease in gripping torque
even if oil remains on the end mill shank. Without slots,
chucking torque is greatly reduced allowing for slippage.
The tightening stopper is located where the maximum
efficiency of chucking torque is exerted. Tightening the
chuck close to the flange face ensures smooth, stable
and reliable milling work.
Thick wall and slots
provides strong chucking torque and rigidity.
Further, slots function
as an escape for oil.
Fine Run-Out Accuracy
The finest run-out accuracy of any Milling Chuck
(0.0002 at 4.0” from the nose).
Chucking Torque Test Data (C42)
%
Nikken
With 3,600 ft. lbs. 3,500 ft. lbs.
Slots
5%
down
Others
Without 2,500 ft lbs
Slots
67%
down
900 ft. lbs.
4”
0
1
2
5
4
3
High Speed Tools
Lyndex-Nikken has a wide
range of high speed products
available. Please refer to our
Advanced Product Catalog
for more information about
Nikken’s high speed Milling
Chucks.
TAP HOLDERS
Trace
amounts
of oil
STUB, BORING, BLANK
Oil is
removed
completly
COLLET CHUCKS
Internal slots together with a thickened wall of the
chuck body ensures no distortion even at heavy
milling. Thus, smooth milling work is achieved without
the vibration or slipping of the end mill.
Only the Ultra-Lock
Milling Chuck perfectly
clamps even at 3mm
from the chuck nose.
DRILL CHUCKS
Rigidity and Chucking Torque
SHELL MILL HOLDERS
END MILL HOLDERS
Consistent chips show optimum performance of cutting
tool, generating maximum tool life.
MILLING CHUCKS
MILLING CHUCKS
11
Ultra-Lock™ Milling Chuck Collets
The Ultra-Lock™ Milling Chuck Collets are designed to insure uniform collapsing
around the cutting tool shank. This provides maximum gripping power as well as
concentric positioning of the cutting tool. Collets are available for all Ultra-Lock
Milling Chucks in inch and metric sizes including coolant thru styles. Cutting tool
shank tolerance is H7.
Examples of Coolant Thru Options
For Grooving.
For cutters with cutting
diameter which is larger
then the shank diameter
Prevention of the swarf
contamination.
A front nut with an O-ring
seal, for use with coolant
thru cutter, is also available as an option
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
MILLING CHUCKS
12
Coolant-Thru Nut
Slotted Nut
When paired with the Ultra-Lock™ Milling Chuck
Coolant Collet (not shown), the Coolant-Thru Nut
forms a complete seal around the cutting tool. This
combination is well suited for coolant-thru cutting
tools. Both the Coolant Collet and the Coolant-Thru
Nut must be ordered on size for each cutting tool (see
page 21-22 for sizes and part numbers).
When paired with the Ultra-Lock™ Milling Chuck
Coolant Collet (not shown), the Slotted Nut allows
coolant to travel down the shank of the cutting tool to
the cutting edge. This combination is well suited for noncoolant-thru cutting tools. Both the Coolant Collet and
the Slotted Nut must be ordered on size for each cutting
tool (see page 21-22 for sizes and part numbers).
MILLING CHUCKS
Collet Series
Clamping Range
d
L
L1
D
CAT40-C3/4-85
CAT40-C3/4-105
CAT40-C3/4-120
CAT40-C1-85
CAT40-C1-105
CAT40-C1.1/4-85
CAT40-C1.1/4-105
CAT40-C1.1/4-120
CAT40-C32-105
CAT45-C3/4-90
CAT45-C1-105
CAT45-C1.1/4-105
CAT50-C3/4-105
CAT50-C3/4-135
CAT50-C3/4-165
CAT50-C1-105
CAT50-C1-135
CAT50-C1.1/4-90
CAT50-C1.1/4-105
CAT50-C1.1/4-135
CAT50-C1.1/4-165
CAT50-C32-105
CAT50-C32-165
CAT50-C2-125
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT45
CT45
CT45
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
KM3/4
KM3/4
KM3/4
KM1
KM1
KM1-1/4
KM1-1/4
KM1-1/4
KM32
KM3/4
KM1
KM1-1/4
KM3/4
KM3/4
KM3/4
KM1
KM1
KM1-1/4
KM1-1/4
KM1-1/4
KM1-1/4
KM32
KM32
KM2
0.125-0.750"
0.125-0.750"
0.125-0.750"
0.125-1.000"
0.125-1.000"
0.187-1.250"
0.187-1.250"
0.187-1.250"
3mm - 32mm
0.125-0.750"
0.125-1.000"
0.187-1.250"
0.125-0.750"
0.125-0.750"
0.125-0.750"
0.125-1.000"
0.125-1.000"
0.187-1.250"
0.187-1.250"
0.187-1.250"
0.187-1.250"
3mm - 32mm
3mm - 32mm
1.000-2.000"
0.750"
0.750"
0.750"
1.000"
1.000"
1.250"
1.250"
1.250"
32mm
0.750"
1.000"
1.250"
0.750"
0.750"
0.750"
1.000"
1.000"
1.250"
1.250"
1.250"
1.250"
32mm
32mm
2.000"
3.346”
4.134”
4.724"
3.346”
4.134”
3.346”
4.134”
4.724”
4.134”
3.543”
4.134”
4.134”
4.134”
5.315”
6.496"
4.134”
5.315”
3.543"
4.134”
5.315”
6.496"
4.134”
6.496"
4.921”
3.150”
3.150”
3.150”
3.150”
3.150”
3.031"
3.543"
4.134”
3.543"
3.150”
3.150”
4.134”
3.150”
3.150”
3.150”
3.150”
3.150”
4.134”
4.134”
4.134”
4.134”
4.134”
4.134”
3.228”
2.047”
2.047”
2.047”
2.362”
2.362”
2.717”
2.717”
2.717”
2.717"
2.047”
2.362”
2.717”
2.047”
2.047”
2.047”
2.362”
2.362”
2.717”
2.717”
2.717”
2.717”
2.717"
2.717"
4.134”
SHELL MILL HOLDERS
Taper
COLLET CHUCKS
Part Number
DRILL CHUCKS
D
END MILL HOLDERS
MILLING CHUCKS
CT TAPER ULTRA-LOCK™ MILLING CHUCKS
Taper
Collet Series
Clamping Range
d
L
L1
D
CAT40-C3/4F-85
CAT40-C3/4F-105
CAT40-C1F-105
CAT40-C1F-85
CAT40-C1.1/4F-105
CAT40-C1.1/4F-120
CAT50-C3/4F-105
CAT50-C3/4F-135
CAT50-C1F-105
CAT50-C1F-135
CAT50-C1.1/4F-105
CAT50-C1.1/4F-135
CT40
CT40
CT40
CT40
CT40
CT40
CT50
CT50
CT50
CT50
CT50
CT50
KM3/4
KM3/4
KM1
KM1
KM1-1/4
KM1-1/4
KM3/4
KM3/4
KM1
KM1
KM1-1/4
KM1-1/4
0.125-0.750"
0.125-0.750"
0.125-1.000"
0.125-1.000"
0.187-1.250"
0.187-1.250"
0.125-0.750"
0.125-0.750"
0.125-1.000"
0.125-1.000"
0.187-1.250"
0.187-1.250"
0.750"
0.750"
1.000"
1.000"
1.250"
1.250"
0.750"
0.750"
1.000"
1.000"
1.250"
1.250"
3.346”
4.134”
4.134”
3.346”
4.134”
4.724”
4.134”
5.315”
4.134”
5.315”
4.134”
5.315”
3.150”
3.150”
3.150”
3.150”
3.543"
4.134”
3.150”
3.150”
3.150”
3.150”
4.134”
4.134”
2.047”
2.047”
2.362”
2.362”
2.717”
2.717”
2.047”
2.047”
2.362”
2.362”
2.717”
2.717”
STUB, BORING, BLANK
Part Number
TAP HOLDERS
CT TAPER ULTRA-LOCK™ MILLING CHUCKS (DIN)
Note: Spanner Wrench not included.
13
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
MILLING CHUCKS
14
BT TAPER ULTRA-LOCK™ MILLING CHUCKS
D
Part Number
Taper
Collet Series
Clamping Range
d
L
L1
D
BT30-C3/4-75
BT35-C3/4-70
BT40-C3/4-70
BT40-C3/4-105
BT40-C1-70
BT40-C1-90
BT40-C1.1/4-85
BT40-C1.1/4-120
BT40-C32-105
BT45-C1.1/4-85
BT50-C3/4-105
BT50-C3/4-135
BT50-C1-105
BT50-C1-135
BT50-C1.1/4-90
BT50-C1.1/4-135
BT50-C2-105
BT50-C32-105
BT50-C32-165
BT30
BT35
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT45
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
KM3/4
KM3/4
KM3/4
KM3/4
KM1
KM1
KM1-1/4
KM1-1/4
KM32
KM1-1/4
KM3/4
KM3/4
KM1
KM1
KM1-1/4
KM1-1/4
KM2
KM32
KM32
0.125-0.750"
0.125-0.750"
0.125-0.750"
0.125-0.750"
0.125-1.000"
0.125-1.000"
0.187-1.250"
0.187-1.250"
3mm - 32mm
0.187-1.250"
0.125-0.750"
0.125-0.750"
0.125-1.000"
0.125-1.000"
0.187-1.250"
0.187-1.250"
1.000-2.000"
3mm - 32mm
3mm - 32mm
0.750"
0.750"
0.750"
0.750"
1.000"
1.000"
1.250"
1.250"
32mm
1.250"
0.750"
0.750"
1.000"
1.000"
1.250"
1.250"
2.000"
32mm
32mm
2.953”
2.756”
2.756”
4.134”
2.756”
3.543”
3.346”
4.724”
4.134”
3.346”
4.134”
5.315”
4.134”
5.315”
3.543”
5.315”
4.134”
4.134”
6.496"
3.150”
3.150”
3.150”
3.150”
3.150”
3.150”
3.031”
4.134”
3.543"
4.134”
3.150”
3.150”
3.150”
3.150”
4.134”
4.134”
3.543”
4.134”
4.134”
2.047”
2.047”
2.047”
2.047”
2.362”
2.362”
2.717”
2.717”
2.717"
2.717”
2.047”
2.047”
2.362”
2.362”
2.717”
2.717”
4.134”
2.717"
2.717"
MILLING CHUCKS
d
L
L1
D
NMTB40
NMTB40
NMTB50
NMTB50
NMTB50
KM3/4
KM1-1/4
KM3/4
KM1-1/4
KM2
0.125-0.750"
0.187-1.250"
0.125-0.750"
0.187-1.250"
1.000-2.000"
0.750"
1.250"
0.750"
1.250"
2.000"
2.756”
4.134”
2.559”
3.543”
4.134”
3.150”
3.150”
3.150”
4.134”
3.543”
2.047”
2.717”
2.047”
2.717”
4.134”
SHELL MILL HOLDERS
Clamping Range
COLLET CHUCKS
Collet Series
DRILL CHUCKS
NMTB40-C3/4-70
NMTB40-C1.1/4-105
NMTB50-C3/4-65
NMTB50-C1.1/4-90
NMTB50-C2-105
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
NMTB TAPER ULTRA-LOCK™ MILLING CHUCKS
15
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
MILLING CHUCKS
16
HSK TAPER ULTRA-LOCK™ MILLING CHUCKS
D
Part Number
HSK63A-C3/4-95
HSK63A-C3/4-110
HSK63A-C1-100
HSK63A-C1-130
HSK63A-C1.1/4-110
HSK63A-C1.1/4-130
HSK63A-C32-130
HSK100A-C3/4-115
HSK100A-C3/4-135
HSK100A-C1-115
HSK100A-C1-135
HSK100A-C1.1/4-115
HSK100A-C1.1/4-165
HSK100A-C32-135
HSK100A-C2-125
Taper
Collet Series
Clamping Range
d
L
L1
D
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
KM3/4
KM3/4
KM1
KM1
KM1-1/4
KM1-1/4
KM32
KM3/4
KM3/4
KM1
KM1
KM1-1/4
KM1-1/4
KM32
KM2
0.125-0.750"
0.125-0.750"
0.125-1.000"
0.125-1.000"
0.187-1.250"
0.187-1.250"
3mm - 32mm
0.125-0.750"
0.125-0.750"
0.125-1.000"
0.125-1.000"
0.187-1.250"
0.187-1.250"
3mm - 32mm
1.000-2.000"
0.750"
0.750"
1.000"
1.000"
1.250"
1.250"
32mm
0.750"
0.750"
1.000"
1.000"
1.250"
1.250"
32mm
2.000"
3.740”
4.331”
3.937”
5.118”
4.331”
5.118”
5.118”
4.528”
5.315”
4.528”
5.315”
4.528”
6.496”
5.315"
4.921”
2.480”
3.150”
2.972”
3.150”
3.268”
3.189”
4.055"
3.150”
3.150”
3.150”
3.150”
3.268”
3.189”
4.055"
3.543”
2.047”
2.047”
2.362”
2.362”
2.717”
2.717”
2.717”
2.047”
2.047”
2.362”
2.362”
2.717”
2.717”
2.717”
4.134”
Note: Coolant tubes are not included.
Spanner Wrench not included.
MILLING CHUCK SPANNER WRENCHES
Part Number
9HC22
9HC25
9HC32
9HC50
9HC32
Description
3/4" Milling Chuck Spanner Wrench
1" Milling Chuck Spanner Wrench
1.1/4" Milling Chuck Spanner Wrench
2" Milling Chuck Spanner Wrench
32mm Milling Chuck Spanner Wrench
MILLING CHUCKS
KM3/4-1/8
KM3/4-3/16
KM3/4-1/4
KM3/4-5/16
KM3/4-3/8
KM3/4-7/16
KM3/4-1/2
KM3/4-9/16
KM3/4-5/8
Size
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
KM1000 INCH COLLETS
Part Number
Size
KM1-1/8
KM1-3/16
KM1-1/4
KM1-5/16
KM1-3/8
KM1-7/16
KM1-1/2
KM1-5/8
KM1-3/4
KM1-7/8
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
KM32 INCH COLLETS
Part Number
Size
KM32-3/16
KM32-1/4
KM32-5/16
KM32-3/8
KM32-7/16
KM32-1/2
KM32-9/16
KM32-5/8
KM32-3/4
KM32-7/8
KM32-1
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
KM2000 INCH COLLETS
Part Number
Size
KM2-1
KM2-1-1/4
KM2-1-1/2
1"
1-1/4"
1-1/2"
END MILL HOLDERS
SHELL MILL HOLDERS
Part Number
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
COLLET CHUCKS
KM0750 INCH COLLETS
KM1.1/4-3/16
KM1.1/4-1/4
KM1.1/4-5/16
KM1.1/4-3/8
KM1.1/4-7/16
KM1.1/4-1/2
KM1.1/4-9/16
KM1.1/4-5/8
KM1.1/4-3/4
KM1.1/4-7/8
KM1.1/4-1
Size
DRILL CHUCKS
Part Number
TAP HOLDERS
KM1250 INCH COLLETS
STUB, BORING, BLANK
KM Collets (inch)
MILLING CHUCKS
MILLING CHUCKS
17
END MILL HOLDERS
MILLING CHUCKS
MILLING CHUCKS
KM Collets (metric)
KM0750 METRIC COLLETS
Part Number
KM3/4-6
KM3/4-7
KM3/4-8
KM3/4-10
KM3/4-12
KM3/4-14
KM3/4-16
Size
6mm
7mm
8mm
10mm
12mm
14mm
16mm
KM32 METRIC COLLETS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
18
Part Number
KM1-6
KM1-8
KM1-10
KM1-12
KM1-14
KM1-16
KM1-18
KM1-20
Part Number
Size
Size
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
Part Number
Size
KM1.1/4-6
KM1.1/4-8
KM1.1/4-10
KM1.1/4-12
KM1.1/4-14
KM1.1/4-16
KM1.1/4-20
KM1.1/4-25
6mm
8mm
10mm
12mm
14mm
16mm
20mm
25mm
KM32-6
KM32-8
KM32-10
KM32-12
KM32-14
KM32-16
KM32-20
KM32-25
KM32-26
6mm
8mm
10mm
12mm
14mm
16mm
20mm
25mm
26mm
Size
NK3/4-1/8
NK3/4-3/16
NK3/4-1/4
NK3/4-5/16
NK3/4-3/8
NK3/4-7/16
NK3/4-1/2
NK3/4-9/16
NK3/4-5/8
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
NK1000 INCH COLLETS
Part Number
NK1-1/8
NK1-3/16
NK1-1/4
NK1-5/16
NK1-3/8
NK1-7/16
NK1-1/2
NK1-5/8
NK1-3/4
NK1-7/8
Size
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
NK32 INCH COLLETS
Part Number
Size
NK32-3/16
NK32-1/4
NK32-5/16
NK32-3/8
NK32-7/16
NK32-1/2
NK32-9/16
NK32-5/8
NK32-3/4
NK32-7/8
NK32-1
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
NK2000 INCH COLLETS
Part Number
Size
NK2-1
NK2-1-1/4
NK2-1-1/2
1"
1-1/4"
1-1/2"
END MILL HOLDERS
SHELL MILL HOLDERS
Part Number
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
COLLET CHUCKS
NK0750 INCH COLLETS
NK1.1/4-3/16
NK1.1/4-1/4
NK1.1/4-5/16
NK1.1/4-3/8
NK1.1/4-7/16
NK1.1/4-1/2
NK1.1/4-9/16
NK1.1/4-5/8
NK1.1/4-3/4
NK1.1/4-7/8
NK1.1/4-1
Size
DRILL CHUCKS
Part Number
TAP HOLDERS
NK1250 INCH COLLETS
STUB, BORING, BLANK
NK Collets Depth Adjustable (inch)
MILLING CHUCKS
MILLING CHUCKS
19
END MILL HOLDERS
MILLING CHUCKS
MILLING CHUCKS
NK Collets Depth Adjustable (metric)
NK0750 METRIC COLLETS
Part Number
NK3/4-6
NK3/4-7
NK3/4-8
NK3/4-10
NK3/4-12
NK3/4-14
NK3/4-16
Size
6mm
7mm
8mm
10mm
12mm
14mm
16mm
NK32 METRIC COLLETS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
20
Part Number
NK1-6
NK1-8
NK1-10
NK1-12
NK1-14
NK1-16
NK1-18
NK1-20
Size
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
Part Number
Size
NK1.1/4-6
NK1.1/4-8
NK1.1/4-10
NK1.1/4-12
NK1.1/4-14
NK1.1/4-16
NK1.1/4-20
NK1.1/4-25
6mm
8mm
10mm
12mm
14mm
16mm
20mm
25mm
Part Number
NK32-6
NK32-8
NK32-10
NK32-12
NK32-14
NK32-16
NK32-20
NK32-25
NK32-26
Size
6mm
8mm
10mm
12mm
14mm
16mm
20mm
25mm
26mm
MILLING CHUCKS
Coolant-Thru Nut
Slotted Nut
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
6mm
7mm
8mm
10mm
12mm
14mm
16mm
CCK3/4-1/8
CCK3/4-3/16
CCK3/4-1/4
CCK3/4-5/16
CCK3/4-3/8
CCK3/4-7/16
CCK3/4-1/2
CCK3/4-9/16
CCK3/4-5/8
CCK3/4-6
CCK3/4-7
CCK3/4-8
CCK3/4-10
CCK3/4-12
CCK3/4-14
CCK3/4-16
CKFN3/4-1/8C
CKFN3/4-3/16C
CKFN3/4-1/4C
CKFN3/4-5/16C
CKFN3/4-3/8C
CKFN3/4-7/16C
CKFN3/4-1/2C
CKFN3/4-9/16C
CKFN3/4-5/8C
CKFN3/4-6C
CKFN3/4-7C
CKFN3/4-8C
CKFN3/4-10C
CKFN3/4-12C
CKFN3/4-14C
CKFN3/4-16C
CKFN3/4-1/8
CKFN3/4-3/16
CKFN3/4-1/4
CKFN3/4-5/16
CKFN3/4-3/8
CKFN3/4-7/16
CKFN3/4-1/2
CKFN3/4-9/16
CKFN3/4-5/8
CKFN3/4-6
CKFN3/4-7
CKFN3/4-8
CKFN3/4-10
CKFN3/4-12
CKFN3/4-14
CKFN3/4-16
Slotted Nut
SHELL MILL HOLDERS
Coolant Collet
COLLET CHUCKS
Size
END MILL HOLDERS
MILLING CHUCKS
3/4 INCH COOLANT THRU ACCESSORIES
Coolant-Thru Nut
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
7/8"
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
CCK1-1/8
CCK1-3/16
CCK1-1/4
CCK1-5/16
CCK1-3/8
CCK1-7/16
CCK1-1/2
CCK1-5/8
CCK1-3/4
CCK1-7/8
CCK1-6
CCK1-8
CCK1-10
CCK1-12
CCK1-14
CCK1-16
CCK1-18
CCK1-20
CKFN1-1/8C
CKFN1-3/16C
CKFN1-1/4C
CKFN1-5/16C
CKFN1-3/8C
CKFN1-7/16C
CKFN1-1/2C
CKFN1-5/8C
CKFN1-3/4C
CKFN1-7/8C
CKFN1-6C
CKFN1-8C
CKFN1-10C
CKFN1-12C
CKFN1-14C
CKFN1-16C
CKFN1-18C
CKFN1-20C
CKFN1-1/8
CKFN1-3/16
CKFN1-1/4
CKFN1-5/16
CKFN1-3/8
CKFN1-7/16
CKFN1-1/2
CKFN1-5/8
CKFN1-3/4
CKFN1-7/8
CKFN1-6
CKFN1-8
CKFN1-10
CKFN1-12
CKFN1-14
CKFN1-16
CKFN1-18
CKFN1-20
TAP HOLDERS
Coolant Collet
STUB, BORING, BLANK
Size
DRILL CHUCKS
1 INCH COOLANT THRU ACCESSORIES
21
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
MILLING CHUCKS
1.1/4 INCH COOLANT THRU ACCESSORIES
Size
Coolant Collet
Coolant-Thru Nut
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
6mm
8mm
10mm
12mm
14mm
16mm
20mm
25mm
CCK1.1/4-3/16
CCK1.1/4-1/4
CCK1.1/4-5/16
CCK1.1/4-3/8
CCK1.1/4-7/16
CCK1.1/4-1/2
CCK1.1/4-9/16
CCK1.1/4-5/8
CCK1.1/4-3/4
CCK1.1/4-7/8
CCK1.1/4-1
CCK1.1/4-6
CCK1.1/4-8
CCK1.1/4-10
CCK1.1/4-12
CCK1.1/4-14
CCK1.1/4-16
CCK1.1/4-20
CCK1.1/4-25
CKFN1.1/4-3/16C
CKFN1.1/4-1/4C
CKFN1.1/4-5/16C
CKFN1.1/4-3/8C
CKFN1.1/4-7/16C
CKFN1.1/4-1/2C
CKFN1.1/4-9/16C
CKFN1.1/4-5/8C
CKFN1.1/4-3/4C
CKFN1.1/4-7/8C
CKFN1.1/4-1C
CKFN1.1/4-6C
CKFN1.1/4-8C
CKFN1.1/4-10C
CKFN1.1/4-12C
CKFN1.1/4-14C
CKFN1.1/4-16C
CKFN1.1/4-20C
CKFN1.1/4-25C
Slotted Nut
CKFN1.1/4-3/16
CKFN1.1/4-1/4
CKFN1.1/4-5/16
CKFN1.1/4-3/8
CKFN1.1/4-7/16
CKFN1.1/4-1/2
CKFN1.1/4-9/16
CKFN1.1/4-5/8
CKFN1.1/4-3/4
CKFN1.1/4-7/8
CKFN1.1/4-1
CKFN1.1/4-6
CKFN1.1/4-8
CKFN1.1/4-10
CKFN1.1/4-12
CKFN1.1/4-14
CKFN1.1/4-16
CKFN1.1/4-20
CKFN1.1/4-25
COLLET CHUCKS
2 INCH COOLANT THRU ACCESSORIES
Size
Coolant Collet
Coolant-Thru Nut
1"
1.1/4"
1.1/2"
CCK2-1
CCK2-1.1/4
CCK2-1.1/2
CKFN2-1C
CKFN2-1.1/4C
CKFN2-1.1/2C
Slotted Nut
CKFN2-1
CKFN2-1.1/4
CKFN2-1.1/2
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
32 MM COOLANT THRU ACCESSORIES
22
Size
Coolant Collet
Coolant-Thru Nut
Slotted Nut
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
6mm
8mm
10mm
12mm
14mm
16mm
20mm
25mm
CCK32-3/16
CCK32-1/4
CCK32-5/16
CCK32-3/8
CCK32-7/16
CCK32-1/2
CCK32-9/16
CCK32-5/8
CCK32-3/4
CCK32-7/8
CCK32-1
CCK32-6
CCK32-8
CCK32-10
CCK32-12
CCK32-14
CCK32-16
CCK32-20
CCK32-25
CKFN32-3/16C
CKFN32-1/4C
CKFN32-5/16C
CKFN32-3/8C
CKFN32-7/16C
CKFN32-1/2C
CKFN32-9/16C
CKFN32-5/8C
CKFN32-3/4C
CKFN32-7/8C
CKFN32-1C
CKFN32-6C
CKFN32-8C
CKFN32-10C
CKFN32-12C
CKFN32-14C
CKFN32-16C
CKFN32-20C
CKFN32-25C
CKFN32-3/16
CKFN32-1/4
CKFN32-5/16
CKFN32-3/8
CKFN32-7/16
CKFN32-1/2
CKFN32-9/16
CKFN32-5/8
CKFN32-3/4
CKFN32-7/8
CKFN32-1
CKFN32-6
CKFN32-8
CKFN32-10
CKFN32-12
CKFN32-14
CKFN32-16
CKFN32-20
CKFN32-25
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
23
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
24
CT40 END MILL HOLDERS
D
Part Number
Taper
C40S6-0125
C4006-0125
C4016-0125
C40S6-0187
C4006-0187
C4016-0187
C40S6-0250
C4006-0250
C4016-0250
C40S6-0312
C4006-0312
C4016-0312
C40S6-0375
C4006-0375
C4016-0375
C4026-0375
C4006-0437
C4016-0437
C40S6-0500
C4006-0500
C4016-0500
C4026-0500
C40S6-0625
C4006-0625
C4016-0625
C4026-0625
C40S6-0750
C4006-0750
C4016-0750
C4026-0750
C40S6-0875
C4006-0875
C4016-0875
C40S6-1000
C4006-1000
C4016-1000
C40S6-1250
C4006-1250
C4016-1250
C4006-1500
C4016-1500
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
d
1/8”
1/8”
1/8”
3/16”
3/16”
3/16”
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
3/8”
3/8”
3/8”
3/8”
7/16”
7/16”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
3/4”
7/8”
7/8”
7/8”
1”
1”
1”
1-1/4”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
L
L1
D
1.38”
2.36”
4.00”
1.38”
2.50”
4.00”
1.38”
2.50”
4.00”
1.38”
2.50”
4.00”
1.38”
2.50”
4.00”
5.00”
2.50”
4.00”
1.75”
2.50”
4.00”
5.00”
1.75”
3.00”
4.00”
5.50”
1.75”
3.00”
4.00”
5.50”
1.75”
3.50”
6.00”
2.00”
4.00”
6.00”
2.00”
4.00”
6.00”
4.50”
6.00”
0.74”
0.63”
0.63”
0.94”
0.86”
0.86”
1.18”
1.10”
1.10”
1.34”
1.26”
1.26”
1.34”
1.26”
1.26”
1.26”
1.50”
1.50”
1.50”
1.50”
1.50”
1.50”
1.61”
1.61”
1.61”
1.61”
1.77”
1.77”
1.77”
1.77”
2.08”
2.08”
2.08”
2.36”
2.36”
2.36”
2.28”
2.55”
2.55”
2.55”
2.83”
0.75”
0.75”
0.75”
0.75”
0.75”
0.75”
0.79”
0.79”
0.79”
0.87”
0.87”
0.87”
1.00”
1.00”
1.00”
1.00”
1.38”
1.38”
1.38”
1.38”
1.38”
1.38”
1.65”
1.65”
1.65”
1.65”
1.89”
1.75”
1.75”
1.75”
1.94”
2.00”
2.00”
2.25”
2.36”
2.36”
2.25”
2.48”
2.48”
2.99”
2.99”
Set Screw
6-32X1/4
6-32X1/4
6-32X1/4
8-32X1/4
8-32X1/4
8-32X1/4
1/4-28X1/4
1/4-28X1/4
1/4-28X1/4
5/16-24X1/4
5/16-24X1/4
5/16-24X1/4
3/8-24X5/16
3/8-24X5/16
3/8-24X5/16
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
5/8-18X1/2 (2)
3/4-16X11/16
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
END MILL HOLDERS
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
25mm
32mm
L1
D
2.50”
2.50”
2.50”
2.50”
3.00”
3.00”
3.00”
3.00”
4.00”
4.00”
1.10”
1.25”
1.25”
1.50”
1.61”
1.61”
1.77”
1.77”
2.36”
2.36”
0.78”
0.87”
1.00”
1.38”
1.65”
1.65”
1.75”
1.75”
2.36”
2.48”
Note: End Mill Holders come equipped with set screws.
HSBALANCE™ End Mill Holders
For high speed applications, refer to the HSBALANCE™ section in the Advanced Product Catalog
Set Screw
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18x1/2
5/8-18x1/2
3/4-16X11/16 (2)
3/4-16X11/16 (2)
SHELL MILL HOLDERS
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
L
COLLET CHUCKS
C4006-6
C4006-8
C4006-10
C4006-12
C4006-14
C4006-16
C4006-18
C4006-20
C4006-25
C4006-32
d
DRILL CHUCKS
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
CT40 END MILL HOLDERS (METRIC)
25
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
CT40 END MILL HOLDERS - DIN
D
Part Number
Taper
C4006-0125DIN
C4016-0125DIN
C4006-0187DIN
C4016-0187DIN
C4006-0250DIN
C4016-0250DIN
C4006-0312DIN
C4016-0312DIN
C4006-0375DIN
C4016-0375DIN
C4006-0437DIN
C4016-0437DIN
C4006-0500DIN
C4016-0500DIN
C4006-0625DIN
C4016-0625DIN
C4006-0750DIN
C4016-0750DIN
C4006-0875DIN
C4016-0875DIN
C4006-1000DIN
C4016-1000DIN
C4006-1250DIN
C4016-1250DIN
C4006-1500DIN
C4016-1500DIN
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
d
1/8”
1/8”
3/16”
3/16”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
7/16”
7/16”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
7/8”
7/8”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
L
L1
D
2.36”
4.00”
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
3.00”
4.50”
3.00”
4.50”
3.50”
5.00”
4.00”
5.50”
4.00”
5.50”
4.50”
6.00”
0.63”
0.63”
0.86”
0.86”
1.10”
1.10”
1.26”
1.26”
1.26”
1.26”
1.50”
1.50”
1.50”
1.50”
1.61”
1.61”
1.77”
1.77”
2.08”
2.08”
2.36”
2.36”
2.55”
2.55”
2.60”
2.60”
0.75”
0.75”
0.75”
0.75”
0.79”
0.79”
0.87”
0.87”
1.00”
1.00”
1.38”
1.38”
1.38”
1.38”
1.65”
1.65”
1.75”
1.75”
2.00”
2.00”
2.36”
2.36”
2.48”
2.48”
2.99”
2.99”
L
L1
D
2.50”
2.50”
2.50”
2.50”
3.00”
3.00”
3.00”
3.00”
4.00”
4.00”
1.10”
1.25”
1.25”
1.50”
1.61”
1.61”
1.77”
1.77”
2.36”
2.36”
0.78”
0.87”
1.00”
1.38”
1.65”
1.65”
1.75”
1.75”
2.36”
2.48”
6-32X1/4
6-32X1/4
8-32X1/4
8-32X1/4
1/4-28X1/4
1/4-28X1/4
5/16-24X1/4
5/16-24X1/4
3/8-24X5/16
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
5/8-18X1/2 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
CT40 END MILL HOLDERS (METRIC) - DIN
Part Number
C4006-6DIN
C4006-8DIN
C4006-10DIN
C4006-12DIN
C4006-14DIN
C4006-16DIN
C4006-18DIN
C4006-20DIN
C4006-25DIN
C4006-32DIN
Taper
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
d
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
25mm
32mm
Note: “DIN” designates suitability for coolant through the flange per DIN 69871 Form B specs.
26
Set Screw
Set Screw
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18x1/2
5/8-18x1/2
3/4-16X11/16 (2)
3/4-16X11/16 (2)
END MILL HOLDERS
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
7/8”
1”
1-1/4”
1-1/2”
2”
L1
D
2.36”
2.50”
2.50”
2.50”
2.50”
2.50”
3.00”
3.00”
3.50”
4.00”
4.00”
4.50”
5.50”
0.63”
0.87”
1.10”
1.26”
1.26”
1.50”
1.61”
1.77”
2.08”
2.36”
2.55”
2.83”
3.34”
0.75”
0.75”
0.78”
0.87”
1.00”
1.38”
1.65”
1.89”
2.00”
2.36”
2.48”
2.99”
3.74”
Set Screw
6-32X1/4
8-32X1/4
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2(2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
1”-14X7/8 (2)
SHELL MILL HOLDERS
CT45
CT45
CT45
CT45
CT45
CT45
CT45
CT45
CT45
CT45
CT45
CT45
CT45
L
COLLET CHUCKS
C4506-0125
C4506-0187
C4506-0250
C4506-0312
C4506-0375
C4506-0500
C4506-0625
C4506-0750
C4506-0875
C4506-1000
C4506-1250
C4506-1500
C4506-2000
d
DRILL CHUCKS
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
27
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
28
D
Part Number
Taper
C50S6-0250
C5006-0250
C5016-0250
C5026-0250
C5036-0250
C5006-0312
C5016-0312
C5026-0312
C50S6-0375
C5006-0375
C5016-0375
C5026-0375
C5036-0375
C5006-0437
C5016-0437
C5026-0437
C5036-0437
C50S6-0500
C5006-0500
C5016-0500
C5026-0500
C5036-0500
C50S6-0625
C5006-0625
C5016-0625
C5026-0625
C5036-0625
C50S6-0750
C5006-0750
C5016-0750
C5026-0750
C5036-0750
C50S6-0875
C5006-0875
C5016-0875
C50S6-1000
C5006-1000
C5016-1000
C5026-1000
C50S6-1250
C5006-1250
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
d
1/4”
1/4”
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
3/8”
3/8”
3/8”
3/8”
3/8”
7/16”
7/16”
7/16”
7/16”
1/2”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
3/4”
3/4”
7/8”
7/8”
7/8”
1”
1”
1”
1”
1-1/4”
1-1/4”
L
L1
D
1.38”
2.50”
4.00”
6.00”
8.00”
2.50”
4.00”
6.00”
1.38”
2.50”
4.00”
6.00”
8.00”
2.50”
4.00”
6.00”
8.00”
1.75”
2.63”
4.00”
6.00”
8.00”
1.75”
3.00”
4.00”
6.00”
8.00”
1.75”
3.00”
4.00”
6.00”
8.00”
1.75”
3.75”
6.00”
2.00”
4.00”
6.00”
8.00”
2.00”
4.00”
1.10”
1.10”
1.10”
1.10”
1.10”
1.26”
1.26”
1.26”
1.26”
1.26”
1.26”
1.26”
1.26”
1.50”
1.50”
1.53”
1.48”
1.50”
1.50”
1.50”
1.50”
1.48”
1.61”
1.61”
1.61”
1.61”
1.57”
1.77”
1.77”
1.77”
1.77”
1.76”
2.08”
2.08”
2.08”
2.36”
2.36”
2.36”
2.36”
2.55”
2.55”
0.79”
0.79”
0.79”
0.79”
0.79”
0.87”
0.87”
0.87”
1.00”
1.00”
1.00”
1.00”
1.00”
1.38”
1.38”
1.38”
1.38”
1.38”
1.38”
1.38”
1.38”
1.38”
1.65”
1.65”
1.65”
1.65”
1.65”
1.89”
1.89”
1.89”
1.89”
1.89”
2.00”
2.00”
2.00”
2.36”
2.36”
2.36”
2.36”
2.75”
2.48”
Set Screw
1/4-28X1/4
1/4-28X1/4
1/4-28X1/4
1/4-28X1/4
1/4-28X1/4
5/16-24X1/4
5/16-24X1/4
5/16-24X1/4
3/8-24X5/16
3/8-24X5/16
3/8-24X5/16
3/8-24X5/16
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
9/16-18X1/2
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
5/8-18X1/2 (2)
3/4-16X11/16
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16
3/4-16X11/16 (2)
Taper
C5016-1250
C5026-1250
C50S6-1500
C5006-1500
C5016-1500
C5026-1500
C50S6-2000
C5006-2000
C5016-2000
C5026-2000
C5006-2500
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
d
1-1/4”
1-1/4”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
2”
2”
2”
2”
2-1/2”
L
L1
D
6.00”
8.00”
2.25”
4.50”
7.00”
9.00”
3.63”
5.37”
8.00”
10.00”
6.00”
2.55”
2.55”
2.83”
2.83”
2.83”
2.83”
3.34”
3.34”
3.34”
3.34”
3.66”
2.48”
2.48”
2.75”
2.99”
2.99”
2.99”
3.74”
3.74”
3.74”
3.74”
4.25”
L
L1
D
2.50”
2.50”
2.50”
2.63”
3.00”
3.00”
3.00”
3.00”
4.00”
4.00”
4.50”
4.50”
5.37”
1.10”
1.10”
1.26”
1.50”
1.61”
1.61”
1.77”
1.77”
2.36”
2.55”
2.95”
2.83”
3.35”
0.79”
0.87”
1.00”
1.38”
1.65”
1.65”
1.89”
1.89”
2.36”
2.48”
3.07”
3.07”
3.74”
Set Screw
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
1”-14X7/8 (2)
1”-14X7/8 (2)
1”-14X7/8 (2)
1”-14X7/8 (2)
1”-14X7/8 (2)
(2)
(2)
(2)
(2)
(2)
SHELL MILL HOLDERS
CT50 END MILL HOLDERS (METRIC)
Taper
C5006-6
C5006-8
C5006-10
C5006-12
C5006-14
C5006-16
C5006-18
C5006-20
C5006-25
C5006-32
C5006-40
C5006-42
C5006-50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
d
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
25mm
32mm
40mm
42mm
50mm
End Mill Holders
For high speed applications, refer to the HSBALANCE™ section in the Advanced Product Catalog
Set Screw
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
1”-14X7/8 (2)
DRILL CHUCKS
Part Number
COLLET CHUCKS
D
(2)
(2)
(2)
(2)
TAP HOLDERS
Part Number
END MILL HOLDERS
CT50 END MILL HOLDERS (cont.)
MILLING CHUCKS
END MILL HOLDERS
STUB, BORING, BLANK
HSBALANCE™
29
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
30
CT50 END MILL HOLDERS - DIN
D
Part Number
Taper
C5006-0250DIN
C5016-0250DIN
C5026-0250DIN
C5006-0312DIN
C5016-0312DIN
C5026-0312DIN
C5006-0375DIN
C5016-0375DIN
C5026-0375DIN
C5006-0437DIN
C5016-0437DIN
C5026-0437DIN
C5006-0500DIN
C5016-0500DIN
C5026-0500DIN
C5006-0625DIN
C5016-0625DIN
C5026-0625DIN
C5006-0750DIN
C5016-0750DIN
C5026-0750DIN
C5006-0875DIN
C5016-0875DIN
C5026-0875DIN
C5006-1000DIN
C5016-1000DIN
C5026-1000DIN
C5006-1250DIN
C5016-1250DIN
C5026-1250DIN
C5006-1500DIN
C5016-1500DIN
C5026-1500DIN
C5006-2000DIN
C5006-2500DIN
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
d
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
3/8”
3/8”
3/8”
7/16”
7/16”
7/16”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
7/8”
7/8”
7/8”
1”
1”
1”
1-1/4”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
1-1/2”
2”
2-1/2”
L
L1
D
2.50”
4.00”
6.00”
2.50”
4.00”
6.00”
2.50”
4.00”
6.00”
2.50”
4.00”
6.00”
2.63”
4.00”
6.00”
3.00”
4.00”
6.00”
3.00”
4.00”
6.00”
3.75”
6.00”
8.00”
4.00”
6.00”
8.00”
4.00”
6.00”
8.00”
4.50”
7.00”
9.00”
5.37”
6.00”
1.10”
1.10”
1.10”
1.26”
1.30”
1.30”
1.26”
1.26”
1.26”
1.50”
1.50”
1.53”
1.50”
1.50”
1.50”
1.61”
1.61”
1.61”
1.77”
1.77”
1.77”
2.08”
2.08”
2.08”
2.36”
2.36”
2.36”
2.55”
2.55”
2.55”
2.75”
2.75”
2.75”
3.34”
3.66”
0.79”
0.79”
0.79”
0.87”
0.87”
0.87”
1.00”
1.00”
1.00”
1.38”
1.38”
1.38”
1.38”
1.38”
1.38”
1.65”
1.65”
1.65”
1.89”
1.89”
1.89”
2.00”
2.00”
2.00”
2.36”
2.36”
2.36”
2.48”
2.48”
2.48”
2.99”
2.99”
2.99”
3.74”
4.25”
Set Screw
1/4-28X1/4
1/4-28X1/4
1/4-28X1/4
5/16-24X1/4
5/16-24X1/4
5/16-24X1/4
3/8-24X5/16
3/8-24X5/16
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
5/8-18X1/2 (2)
5/8-18X1/2 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
1”-14X7/8 (2)
1”-14X7/8 (2)
END MILL HOLDERS
MILLING CHUCKS
CT50 END MILL HOLDERS (METRIC) - DIN
D
2.50”
2.50”
2.50”
2.63”
3.00”
3.00”
3.00”
3.00”
4.00”
4.00”
4.50”
4.50”
5.37”
1.10”
1.10”
1.26”
1.50”
1.61”
1.61”
1.77”
1.77”
2.36”
2.55”
2.76”
2.76”
3.35”
0.79”
0.87”
1.00”
1.38”
1.65”
1.65”
1.89”
1.89”
2.36”
2.48”
3.07”
3.07”
3.74”
End Mill Holders come equipped with set screws.
Set Screw
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
1-14X7/8 (2)
(2)
(2)
(2)
(2)
SHELL MILL HOLDERS
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
25mm
32mm
40mm
42mm
50mm
L1
COLLET CHUCKS
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
L
DRILL CHUCKS
C5006-6DIN
C5006-8DIN
C5006-10DIN
C5006-12DIN
C5006-14DIN
C5006-16DIN
C5006-18DIN
C5006-20DIN
C5006-25DIN
C5006-32DIN
C5006-40DIN
C5006-42DIN
C5006-50DIN
d
TAP HOLDERS
Taper
STUB, BORING, BLANK
Part Number
END MILL HOLDERS
D
31
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
32
CT50 AEROSPACE END MILL HOLDERS
D
Part Number
Taper
C5006-0375A
C5016-0375A
C5026-0375A
C5006-0500A
C5016-0500A
C5026-0500A
C5006-0625A
C5016-0625A
C5026-0625A
C5006-0750A
C5016-0750A
C5026-0750A
C5006-0875A
C5016-0875A
C5026-0875A
C5006-1000A
C5016-1000A
C5026-1000A
C5006-1250A
C5016-1250A
C5026-1250A
C5006-1500A
C5006-2000A
C5016-2000A
C5006-2500A
C5016-2500A
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
d
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
7/8”
7/8”
7/8”
1”
1”
1”
1-1/4”
1-1/4”
1-1/4”
1-1/2”
2”
2”
2-1/2”
2-1/2”
L
L1
D
2.82”
4.69”
6.69”
2.73”
4.60”
6.60”
2.66”
4.53”
6.53”
2.63”
4.50”
6.50”
2.63”
4.50”
6.50”
3.00”
4.50”
6.50”
3.00”
4.50”
6.50”
4.00”
5.35”
7.35”
5.35”
7.35”
1.52”
1.52”
1.52”
1.68”
1.68”
1.68”
1.74”
1.74”
1.74”
2.01”
2.01”
2.01”
2.01”
2.01”
2.01”
2.27”
2.27”
2.27”
2.27”
2.27”
2.27”
2.27”
3.38”
3.38”
3.38”
3.38”
1.37”
1.37”
1.37”
1.63”
1.63”
1.63”
1.81”
1.81”
1.81”
2.00”
2.00”
2.00”
2.25”
2.25”
2.25”
2.63”
2.63”
2.63”
2.87”
2.87”
2.87”
3.25”
4.00”
4.00”
5.00”
5.00”
Note: Lyndex Aerospace End Mill Holders accept end mills with a 5º angled flat shank (per NAS 987).
Set Screw
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
3/8-24UNF
1/2-20UNF
1/2-20UNF
1/2-20UNF
1/2-20UNF
1/2-20UNF
1/2-20UNF
1/2-20UNF
1/2-20UNF
1/2-20UNF
3/4-16UNF
3/4-16UNF
3/4-16UNF
3/4-16UNF
3/4-16UNF
3/4-16UNF
3/4-16UNF
3/4-16UNF(2)
3/4-16UNF(2)
3/4-16UNF(2)
3/4-16UNF(2)
END MILL HOLDERS
9.00"
9.00"
9.00"
9.00"
9.00"
9.00"
9.00"
15.00"
15.00"
15.00"
15.00"
15.00"
15.00"
15.00"
L1
1.10"
1.26"
1.50"
1.61"
1.77"
2.08"
2.36"
1.26"
1.48"
1.56"
1.76"
2.08"
2.36"
2.55"
D
.79"
1.00"
1.38"
1.65"
1.75"
2.00"
2.36"
1.00"
1.38"
1.65"
1.89"
2.00"
2.36"
2.48"
Set Screw
1/4-28X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
3/4-16X11/16 (2)
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
SHELL MILL HOLDERS
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
L
COLLET CHUCKS
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT50
CT50
CT50
CT50
CT50
CT50
CT50
d
DRILL CHUCKS
C4046-0250
C4046-0375
C4046-0500
C4046-0625
C4046-0750
C4046-0875
C4046-1000
C5066-0375
C5066-0500
C5066-0625
C5066-0750
C5066-0875
C5066-1000
C5066-1250
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
NEW EXTENDED LENGTH END MILL HOLDERS
33
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
34
BT30 END MILL HOLDERS
D
Part Number
Taper
B3006-0125
B3006-0187
B3006-0250
B3006-0312
B3006-0375
B3006-0437
B3006-0500
B3006-0625
B3006-0750
B3006-0875
B3006-1000
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
d
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
3/4”
7/8”
1”
L
L1
D
2.36”
2.36”
2.36”
2.36”
2.36”
2.36”
2.36”
2.50”
3.00”
3.54”
3.54”
0.63”
0.87”
1.10”
1.26”
1.26”
1.50”
1.50”
1.61”
1.77”
2.09”
2.36”
0.75”
0.75”
0.79”
0.87”
1.00”
1.38”
1.38”
1.65”
1.88”
2.00”
2.36”
L
L1
D
2.50”
2.50”
2.50”
2.50”
2.50”
2.50”
3.50”
3.50”
3.50”
1.10”
1.26”
1.26”
1.50”
1.61”
1.61”
1.65”
1.65”
2.36”
0.79”
0.87”
1.00”
1.38”
1.65”
1.65”
1.89”
1.89”
2.36”
Set Screw
6-32X1/4
8-32X1/4
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
3/4-16X11/16 (2)
BT30 END MILL HOLDERS (METRIC)
Part Number
Taper
B3006-6
B3006-8
B3006-10
B3006-12
B3006-14
B3006-16
B3006-18
B3006-20
B3006-25
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
d
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
25mm
Set Screw
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
3/4-16X11/16(2)
END MILL HOLDERS
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
3/4”
7/8”
1”
1-1/4”
L1
D
2.36”
2.38”
2.38”
2.38”
2.38”
2.38”
2.38”
2.50”
2.50”
3.50”
3.50”
3.50”
0.63”
0.87”
1.10”
1.26”
1.26”
1.50”
1.50”
1.61”
1.77”
2.09”
2.36”
2.24”
0.75”
0.75”
0.79”
0.87”
1.00”
1.38”
1.38”
1.65”
1.89”
2.00”
2.36”
2.48”
Set Screw
6-32X1/4
8-32X1/4
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
SHELL MILL HOLDERS
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
L
COLLET CHUCKS
B3506-0125
B3506-0187
B3506-0250
B3506-0312
B3506-0375
B3506-0437
B3506-0500
B3506-0625
B3506-0750
B3506-0875
B3506-1000
B3506-1250
d
DRILL CHUCKS
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
35
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
36
D
Part Number
Taper
B40S6-0125
B4006-0125
B4016-0125
B40S6-0187
B4006-0187
B4016-0187
B40S6-0250
B4006-0250
B4016-0250
B40S6-0312
B4006-0312
B4016-0312
B40S6-0375
B4006-0375
B4016-0375
B4006-0437
B40S6-0500
B4006-0500
B4016-0500
B40S6-0625
B4006-0625
B4016-0625
B40S6-0750
B4006-0750
B4016-0750
B4006-0875
B4016-0875
B40S6-1000
B4006-1000
B4016-1000
B40S6-1250
B4006-1250
B4016-1250
B4006-1500
B4016-1500
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
d
1/8”
1/8”
1/8”
3/16”
3/16”
3/16”
1/4”
1/4”
1/4”
5/16”
5/16”
5/16”
3/8”
3/8”
3/8”
7/16”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
7/8”
7/8”
1”
1”
1”
1-1/4”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
L
L1
D
1.38”
2.36”
4.00”
1.38”
2.50”
4.00”
1.38”
2.50”
4.00”
1.38”
2.50”
4.00”
1.38”
2.50”
4.00”
2.50”
1.75”
2.50”
4.00”
1.75”
2.50”
4.00”
1.75”
2.50”
4.00”
3.38”
6.00”
2.00”
3.56”
6.00”
2.00”
3.56”
6.00”
4.50”
6.00”
0.78”
0.63”
0.63”
0.98”
0.86”
0.86”
1.18”
1.10”
1.10”
1.38”
1.26”
1.26”
1.38”
1.26”
1.26”
1.53”
1.57”
1.50”
1.57”
1.61”
1.61”
1.61”
1.77”
1.77”
1.77”
2.08”
2.08”
2.28”
2.36”
2.36”
2.16”
2.56”
2.56”
2.83”
2.83”
0.75”
0.75”
0.75”
0.75”
0.75”
0.75”
0.79”
0.79”
0.79”
0.87”
0.87”
0.87”
1.00”
1.00”
1.00”
1.38”
1.38”
1.38”
1.38”
1.65”
1.65”
1.65”
1.89”
1.89”
1.89”
2.00”
2.00”
2.25”
2.36”
2.36”
2.25”
2.48”
2.48”
2.99”
2.99”
Set Screw
6-32X1/4
6-32X1/4
6-32X1/4
8-32X1/4
8-32X1/4
8-32X1/4
1/4-28X1/4
1/4-28X1/4
1/4-28X1/4
5/16-24X1/4
5/16-24X1/4
5/16-24X1/4
3/8-24x5/16
3/8-24x5/16
3/8-24x5/16
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2(2)
5/8-18X1/2(2)
3/4-16X11/16
3/4-16X11/16(2)
3/4-16X11/16(2)
3/4-16X11/16
3/4-16X11/16(2)
3/4-16X11/16(2)
3/4-16X11/16(2)
3/4-16X11/16(2)
6mm
6mm
8mm
8mm
10mm
10mm
12mm
12mm
14mm
14mm
16mm
16mm
18mm
18mm
20mm
20mm
25mm
25mm
32mm
32mm
L1
D
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
2.50”
4.00”
3.56”
6.00”
3.56”
6.00”
1.10”
1.10”
1.26”
1.26”
1.26”
1.26”
1.50”
1.50”
1.61”
1.61”
1.61”
1.61”
1.77”
1.77”
1.77”
1.77”
2.36”
2.36”
2.56”
2.56”
0.79”
0.79”
0.87”
0.87”
1.00”
1.00”
1.38”
1.38”
1.65”
1.65”
1.65”
1.65”
1.89”
1.89”
1.89”
1.89”
2.36”
2.36”
2.48”
2.48”
L
L1
D
3.00”
3.00”
3.00”
3.00”
3.00”
3.00”
3.00”
3.00”
4.00”
4.00”
4.00”
4.50”
5.00”
0.63”
0.87”
1.10”
1.26”
1.26”
1.53”
1.61”
1.77”
2.08”
2.36”
2.55”
2.83”
3.34”
0.75”
0.75”
0.79”
0.87”
1.00”
1.38”
1.65”
1.89”
2.00”
2.36”
2.48”
3.00”
3.75”
Set Screw
1/4-28X1/4
1/4-28X1/4
5/16-24X1/4
5/16-24X1/4
3/8-24X5/16
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2
3/4-16X11/16(2)
3/4-16X11/16(2)
3/4-16X11/16(2)
3/4-16X11/16(2)
COLLET CHUCKS
D
Part Number
Taper
B4506-0125
B4506-0187
B4506-0250
B4506-0312
B4506-0375
B4506-0500
B4506-0625
B4506-0750
B4506-0875
B4506-1000
B4506-1250
B4506-1500
B4506-2000
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT45
END MILL HOLDERS
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
L
d
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
7/8”
1”
1-1/4”
1-1/2”
2”
Set Screw
6-32X1/4
8-32X1/4
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2(2)
3/4-16X11/16(2)
3/4-16X11/16(2)
3/4-16X11/16(2)
1-14X7/8(2)
DRILL CHUCKS
B4006-6
B4016-6
B4006-8
B4016-8
B4006-10
B4016-10
B4006-12
B4016-12
B4006-14
B4016-14
B4006-16
B4016-16
B4006-18
B4016-18
B4006-20
B4016-20
B4006-25
B4016-25
B4006-32
B4016-32
d
TAP HOLDERS
Taper
STUB, BORING, BLANK
Part Number
SHELL MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
37
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
38
D
Part Number
Taper
B5006-0250
B5016-0250
B5006-0375
B5016-0375
B5006-0500
B5016-0500
B5006-0625
B5016-0625
B5006-0750
B5016-0750
B5006-0875
B5016-0875
B5006-1000
B5016-1000
B5006-1250
B5016-1250
B5006-1500
B5016-1500
B5006-2000
B5016-2000
B5006-2500
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
d
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
7/8”
7/8”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
2”
2-1/2”
L
L1
D
3.00”
6.00”
2.75”
6.00”
3.00”
6.00”
3.00”
6.00”
3.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.50”
7.00”
5.00”
8.00”
6.00”
1.10”
1.10”
1.26”
1.26”
1.50”
1.50”
1.61”
1.61”
1.77”
1.77”
2.08”
2.08”
2.36”
2.36”
2.56”
2.56”
2.83”
2.83”
3.34”
3.34”
3.66”
0.78”
0.78”
1.00”
1.00”
1.38”
1.38”
1.65”
1.65”
1.89”
1.89”
2.00”
2.00”
2.36”
2.36”
2.48”
2.48”
2.99”
2.99”
3.74”
3.74”
4.25”
L
L1
D
2.50”
2.50”
2.75”
3.00”
3.00”
3.00”
3.00”
3.00”
4.00”
4.00”
4.49”
4.49”
5.00”
1.10”
1.25”
1.25”
1.50”
1.61”
1.61”
1.77”
1.77”
2.36”
2.55”
2.83”
2.83”
3.34”
0.79”
0.87”
1.00”
1.38”
1.65”
1.65”
1.89”
1.89”
2.36”
2.48”
3.07”
3.07”
3.74”
Set Screw
1/4-28X1/4
1/4-28X1/4
3/8-24X5/16
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
5/8-18X1/2 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
1-14X7/8 (2)
1-14X7/8 (2)
1-14X7/8 (2)
Part Number
Taper
B5006-6
B5006-8
B5006-10
B5006-12
B5006-14
B5006-16
B5006-18
B5006-20
B5006-25
B5006-32
B5006-40
B5006-42
B5006-50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
d
6mm
8mm
10mm
12mm
14mm
16mm
18mm
20mm
25mm
32mm
40mm
42mm
50mm
Set Screw
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
1-14X7/8 (2)
(2)
(2)
(2)
(2)
END MILL HOLDERS
MILLING CHUCKS
HSK63A END MILL HOLDERS
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
3/16”
3/16”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
7/16”
7/16”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
3.00”
5.00”
3.00”
5.00”
3.00”
5.00”
3.50”
5.00”
4.00”
5.00”
4.00”
5.00”
4.00”
5.00”
4.50”
6.00”
4.50”
6.00”
4.50”
6.00”
0.866"
0.866"
1.102"
1.102"
1.417"
1.417"
1.574”
1.574”
1.771”
1.771”
1.771”
1.771”
1.889”
1.889”
1.968"
1.968"
2.755"
2.755"
2.952"
2.952"
Coolant Tubes are sold separately.
D
0.748"
0.748"
0.787"
0.787"
0.874"
0.874"
1.00"
1.00"
1.378"
1.378"
1.378"
1.378"
1.654"
1.654"
1.889"
1.889"
2.363"
2.363"
2.88”
2.88”
Set Screw
8-32X1/4
8-32X1/4
1/4-28X1/4
1/4-28X1/4
5/16-24X1/4
5/16-24X1/4
3/8-24X5/16
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
SHELL MILL HOLDERS
L1
(2)
(2)
(2)
(2)
COLLET CHUCKS
L
DRILL CHUCKS
d
TAP HOLDERS
HSK63A-0187-3.00
HSK63A-0187-5.00
HSK63A-0250-3.00
HSK63A-0250-5.00
HSK63A-0312-3.00
HSK63A-0312-5.00
HSK63A-0375-3.50
HSK63A-0375-5.00
HSK63A-0437-4.00
HSK63A-0437-5.00
HSK63A-0500-4.00
HSK63A-0500-5.00
HSK63A-0625-4.00
HSK63A-0625-5.00
HSK63A-0750-4.50
HSK63A-0750-6.00
HSK63A-1000-4.50
HSK63A-1000-6.00
HSK63A-1250-4.50
HSK63A-1250-6.00
Taper
STUB, BORING, BLANK
Part Number
END MILL HOLDERS
D
39
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
40
HSK100A END MILL HOLDERS
D
Part Number
HSK100A-0187-4.00
HSK100A-0187-6.00
HSK100A-0250-4.00
HSK100A-0250-6.00
HSK100A-0312-4.00
HSK100A-0312-6.00
HSK100A-0375-4.00
HSK100A-0375-6.00
HSK100A-0437-4.00
HSK100A-0437-6.00
HSK100A-0500-4.00
HSK100A-0500-6.00
HSK100A-0625-4.00
HSK100A-0625-6.00
HSK100A-0750-4.00
HSK100A-0750-6.00
HSK100A-1000-4.00
HSK100A-1000-6.00
HSK100A-1250-4.00
HSK100A-1250-6.00
Taper
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
d
3/16”
3/16”
1/4”
1/4”
5/16”
5/16”
3/8”
3/8”
7/16”
7/16”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
Coolant Tubes are sold separately.
L
L1
D
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
0.867"
0.867"
1.102"
1.102"
1.220"
1.220"
1.260"
1.260"
1.496"
1.496"
1.575"
1.575"
1.693"
1.693"
1.969"
1.969"
2.559"
2.559"
2.559"
2.559"
0.748"
0.748"
0.787"
0.787"
0.866"
0.866"
1.00"
1.00"
1.378"
1.378"
1.378"
1.378"
1.654"
1.654"
1.890"
1.890"
2.362"
2.362"
2.480"
2.480"
Set Screw
8-32X1/4
8-32X1/4
1/4-28X1/4
1/4-28X1/4
5/16-24X1/4
5/16-24X1/4
3/8-24X5/16
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
3/4-16X11/16
(2)
(2)
(2)
(2)
END MILL HOLDERS
Taper
N3006-0125
N3006-0187
N3006-0250
N3006-0312
N3006-0375
N3006-0500
N3006-0625
N3006-0750
N3006-0875
N3006-1000
N3006-1250
NMTB30
NMTB30
NMTB30
NMTB30
NMTB30
NMTB30
NMTB30
NMTB30
NMTB30
NMTB30
NMTB30
d
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
5/8”
3/4”
7/8”
1”
1-1/4”
L
L1
D
1.75”
1.75”
1.75”
1.75”
1.75”
1.75”
1.75”
2.25”
2.50”
2.69”
3.62”
0.63”
0.87”
1.10”
1.26”
1.26”
1.57”
1.69”
1.85”
1.96”
2.24”
2.24”
0.75”
0.75”
0.79”
0.87”
1.00”
1.38”
1.43”
1.89”
2.01”
2.36”
2.48”
L
L1
D
2.31”
2.31”
2.31”
2.31”
2.31”
2.31”
2.31”
2.31”
2.31”
2.94”
3.37”
3.69”
3.95”
0.63”
0.87”
1.10”
1.26”
1.26”
1.50”
1.50”
1.61”
1.77”
2.09”
2.36”
2.56”
2.56”
0.75”
0.75”
0.79”
0.87”
1.00”
1.38”
1.38”
1.65”
1.89”
2.01”
2.36”
2.48”
2.99”
Set Screw
6-32X1/4
8-32X1/4
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
3/4-16X11/16
3/4-16X11/16 (2)
COLLET CHUCKS
Part Number
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
NMTB30 END MILL HOLDERS
DRILL CHUCKS
D
N4006-0125
N4006-0187
N4006-0250
N4006-0312
N4006-0375
N4006-0437
N4006-0500
N4006-0625
N4006-0750
N4006-0875
N4006-1000
N4006-1250
N4006-1500
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
d
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
3/4”
7/8”
1”
1-1/4”
1-1/2”
Set Screw
6-32X1/4
8-32X1/4
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
TAP HOLDERS
Taper
STUB, BORING, BLANK
Part Number
41
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
42
D
Part Number
Taper
N5006-0250
N5006-0375
N5016-0375
N5006-0500
N5016-0500
N5006-0625
N5016-0625
N5006-0750
N5016-0750
N5006-0875
N5016-0875
N5006-1000
N5016-1000
N5006-1250
N5016-1250
N5006-1500
N5016-1500
N5006-2000
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
d
1/4”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
7/8”
7/8”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
L
L1
D
2.75”
2.75”
4.50”
2.75”
4.50”
2.75”
4.50”
2.88”
4.50”
2.88”
4.50”
3.50”
5.50”
3.50”
5.50”
4.00”
6.00”
4.69”
1.10”
1.26”
1.26”
1.50”
1.50”
1.61”
1.61”
1.77”
1.77”
2.09”
2.09”
2.36”
2.36”
2.56”
2.56”
2.83”
2.83”
3.34”
0.79”
1.00”
1.00”
1.38”
1.38”
1.65”
1.65”
1.89”
1.89”
2.01”
2.01”
2.36”
2.36”
2.48”
2.48”
2.99”
2.99”
3.74”
Note: All NMTB toolholder flanges are qualified for use with Erickson QC spindles.
Set Screw
1/4-28X1/4
3/8-24X5/16
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
5/8-18X1/2 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
1-14X7/8 (2)
END MILL HOLDERS
830-008
830-012
830-016
830-020
830-024
830-028
830-032
830-040
830-048
830-056
830-064
830-080
830-096
Taper
R8
R8
R8
R8
R8
R8
R8
R8
R8
R8
R8
R8
R8
d
L
L1
D
1.33”
1.33”
1.33”
1.75”
1.33”
1.33”
1.33”
1.50”
2.37”
2.75”
3.25”
3.25”
3.75”
0.63”
0.87”
1.10”
1.26”
1.26”
1.50”
1.50”
1.61”
1.77”
2.36”
2.76”
2.56”
2.83”
0.75”
0.75”
0.79”
0.87”
1.00”
1.38”
1.38”
1.65”
1.89”
2.01”
2.36”
2.48”
2.99”
L
L1
D
D1
6.00”
6.00”
6.00”
6.00”
6.00”
6.00”
0.63”
0.86”
1.10”
1.26”
1.26”
1.49”
.750”
.750”
.750”
.750”
1.00”
1.00”
0.50”
0.56”
0.75”
0.75”
1.00”
1.00”
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
3/4”
7/8”
1”
1-1/4”
1-1/2”
Set Screw
6-32X1/4
8-32X1/4
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16
7/16-20X3/8
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
5/8-18X1/2 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
3/4-16X11/16 (2)
STRAIGHT SHANK END MILL HOLDERS
SHELL MILL HOLDERS
Part Number
COLLET CHUCKS
D
END MILL HOLDERS
MILLING CHUCKS
R8 END MILL HOLDERS
S7506-0125
S7506-0187
S7506-0250
S7506-0312
S1006-0375
S1006-0500
d
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
Set Screw
6-32X1/4
8-32X1/4
1/4-28X1/4
5/16-24X1/4
3/8-24X5/16 (2)
1/4-28x1/4 (2)
STUB, BORING, BLANK
Part Number
TAP HOLDERS
DRILL CHUCKS
D
43
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
END MILL HOLDERS
MORSE TAPER END MILL HOLDERS
D
Part Number
Taper
M0206-0125
M0206-0187
M0206-0250
M0206-0312
M0206-0375
M0206-0500
M0306-0250
M0306-0312
M0306-0375
M0306-0500
M0406-0375
M0406-0500
M0406-0625
M0406-0750
MT#2
MT#2
MT#2
MT#2
MT#2
MT#2
MT#3
MT#3
MT#3
MT#3
MT#4
MT#4
MT#4
MT#4
STUB, BORING, BLANK
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
1/4”
5/16”
3/8”
1/2”
3/8”
1/2”
5/8”
3/4”
L
L1
D
1.50”
1.50”
1.50”
1.50”
1.63”
1.81”
1.50”
1.50”
1.88”
1.94”
2.00”
2.31”
2.50”
2.75”
0.67”
0.87”
1.07”
1.26”
1.26”
1.53”
1.07”
1.26”
1.26”
1.50”
1.35”
1.46”
1.61”
1.77”
0.75”
0.75”
0.79”
0.87”
1.00”
1.26”
0.79”
0.87”
1.00”
1.38”
1.00”
1.38”
1.65”
1.89”
REPLACEMENT EMH SET SCREWS
Part Number
Size of Holder I.D.
S6-32X1/4
S8-32X1/4
S1-14x7/8
S1/4-28x1/4
S5/16-24X1/4
S3/8-24X5/16
S7/16-20X3/8
S9/16-18X1/2
S5/8-18X1/2
S3/4-16X11/16
1/8”
3/16”
2”, 2-1/2”
1/4”, 6mm
5/16”, 8mm
3/8”, 7/16”,10mm
1/2”, 12mm
5/8”, 14-16mm
3/4”, 7/8”, 18-20mm
1”, 1-1/4”, 1-1/2”, 25-42mm
REPLACEMENT AEROSPACE EMH SET SCREWS
Part Number
44
d
Size of Holder I.D.
S3/4-16UNF
1”, 1-1/4”, 1-1/2”, 2”, 2-1/2”
Aerospace End Mill Holder
S1/2-20UNF
5/8”, 3/4”, 7/8”
S3/8-24UNF
3/8”, 1/2”
Set Screw
6-32X1/4
8-32X1/4
1/4-28X1/4
5/16-24X5/16
3/8-24X5/16
7/16-20X3/8
1/4-28X1/4
5/16-24X5/16
3/8-24X5/16
7/16-20X3/8
3/8-24X5/16
7/16-20X3/8
9/16-18X1/2
5/8-18X1/2
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
SHELL MILL HOLDERS
45
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
SHELL MILL HOLDERS
46
CT TAPER SHELL MILL HOLDERS
D
Part Number
Taper
C4001-0500
C4001-0750
C4011-0750
C4001-1000
C4011-1000
C4001-1250
C4011-1250
C4001-1500
C4011-1500
C4501-0750
C4501-1000
C4501-1250
C4501-1500
C4501-2000
C5001-0750
C5011-0750
C5021-0750
C5031-0750
C5001-1000
C5011-1000
C5021-1000
C5031-1000
C5001-1250
C5011-1250
C5021-1250
C5031-1250
C5001-1500
C5011-1500
C5021-1500
C5031-1500
C5001-2000
C5011-2000
C5021-2000
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT45
CT45
CT45
CT45
CT45
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
d
L
1/2”
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
3/4”
3/4”
3/4”
3/4”
1”
1”
1”
1”
1-1/4”
1-1/4”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
2”
2”
2”
Shell Mill Holders
For high speed applications, refer to the
1.75”
1.75”
4.00”
1.75”
4.00”
2.00”
4.00”
2.00”
4.00”
1.75”
1.75”
1.75”
2.00”
2.00”
1.75”
4.00”
6.00”
8.00”
1.75”
4.00”
6.00”
8.00”
1.75”
4.00”
6.00”
8.00”
2.00”
4.00”
6.00”
8.00”
2.00”
4.00”
6.00”
D
1.38”
2.00”
2.00”
2.38”
2.38”
2.88”
2.88”
3.80”
3.80”
2.00”
2.25”
2.88”
3.80”
4.38”
2.00”
2.00”
2.00”
2.00”
2.75”
2.75”
2.75”
2.75”
2.88”
2.88”
2.88”
2.88”
3.80”
3.80”
3.80”
3.80”
4.38”
4.38”
4.38”
L1
0.57”
0.67”
0.67”
0.67”
0.67”
0.67”
0.67”
0.93”
0.93”
0.67”
0.67”
0.67”
0.93”
0.93”
0.67”
0.67”
0.67”
0.67”
0.69”
0.69”
0.69”
0.69”
0.69”
0.69”
0.69”
0.69”
0.93”
0.93”
0.93”
0.93”
0.93”
0.93”
0.93”
Key Size
1/4”
5/16”
5/16”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
5/16”
3/8”
1/2”
5/8”
3/4”
5/16”
5/16”
5/16”
5/16”
3/8”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
HSBALANCE™
HSBALANCE™
section in the Advanced Products Catalog
Arbor Thread
1/4”-28
3/8”-24
3/8”-24
1/2”-20
1/2”-20
5/8”-18
5/8”-18
3/4”-16
3/4”-16
3/8”-24
1/2”-20
5/8”-18
3/4”-16
1”-14
3/8”-24
3/8”-24
3/8”-24
3/8”-24
1/2”-20
1/2”-20
1/2”-20
1/2”-20
5/8”-18
5/8”-18
5/8”-18
5/8”-18
3/4”-16
3/4”-16
3/4”-16
3/4”-16
1”-14
1”-14
1”-14
SHELL MILL HOLDERS
Part Number
Taper
C4001-22
C4001-27
C4001-32
C4001-40
C5001-22
C5001-27
C5001-32
C5001-40
CT40
CT40
CT40
CT40
CT50
CT50
CT50
CT50
d
L
22mm
27mm
32mm
40mm
22mm
27mm
32mm
40mm
D
50mm
50mm
50mm
60mm
60mm
60mm
60mm
60mm
40mm
48mm
58mm
67mm
40mm
48mm
58mm
67mm
L1
19mm
21mm
24mm
27mm
19mm
21mm
24mm
27mm
Key Size
10mm
12mm
14mm
16mm
10mm
12mm
14mm
16mm
Arbor Thread
M10
M12
M16
M20
M10
M12
M16
M20
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
CT TAPER SHELL MILL HOLDERS (METRIC)
CT TAPER FACE MILL HOLDERS
d
L
D
L1
Key Size
CT50
CT50
2”
2-1/2”
2.95”
2.95”
5.06”
5.00”
0.86”
1.18”
3/4”
1.00”
Note: Face Mill Holders are supplied with four 5/8 - 11 mounting bolts.
TAP HOLDERS
C50F1-2000
C50F1-2500
Taper
STUB, BORING, BLANK
Part Number
DRILL CHUCKS
COLLET CHUCKS
D
47
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
SHELL MILL HOLDERS
48
BT TAPER SHELL MILL HOLDERS
D
Part Number
Taper
B3001-0500
B3001-0750
B3001-1000
B3501-0500
B3501-0750
B3501-1000
B3501-1250
B4001-0500
B4001-0750
B4001-1000
B4001-1250
B4001-1500
B4501-0500
B4501-0750
B4501-1000
B4501-1250
B4501-1500
B5001-0750
B5001-1000
B5011-1000
B5021-1000
B5001-1250
B5011-1250
B5021-1250
B5001-1500
B5011-1500
B5021-1500
B5001-2000
B5011-2000
BT30
BT30
BT30
BT35
BT35
BT35
BT35
BT40
BT40
BT40
BT40
BT40
BT45
BT45
BT45
BT45
BT45
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
d
L
1/2”
3/4”
1”
1/2”
3/4”
1”
1-1/4”
1/2”
3/4”
1”
1-1/4”
1-1/2”
1/2”
3/4”
1”
1-1/4”
1-1/2”
3/4”
1”
1”
1”
1-1/4”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
1-1/2”
2”
2”
Shell Mill Holders
1.19”
1.19”
1.19”
1.19”
1.19”
1.19”
1.44”
1.75”
1.75”
1.75”
2.00”
2.00”
1.75”
1.75”
1.75”
1.75”
2.00”
1.75”
1.75”
4.00”
6.00”
2.00”
4.00”
6.00”
2.00”
4.00”
6.00”
2.00”
4.00”
D
1.38”
2.00”
2.38”
1.38”
2.00”
2.38”
2.88”
1.38”
2.00”
2.38”
2.88”
3.80”
1.38”
2.00”
2.38”
2.88”
3.80”
2.00”
2.38”
2.38”
2.38”
2.88”
2.88”
2.88”
3.80”
3.80”
3.80”
4.38”
4.38”
L1
0.57”
0.67”
0.67”
0.57”
0.67”
0.67”
0.67”
0.57”
0.67”
0.67”
0.67”
0.92”
0.57”
0.67”
0.67”
0.67”
0.92”
0.67”
0.68”
0.68”
0.68”
0.68”
0.68”
0.68”
0.93”
0.93”
0.93”
0.93”
0.93”
Key Size
1/4”
5/16”
3/8”
1/4”
5/16”
3/8”
1/2”
1/4”
5/16”
3/8”
1/2”
5/8”
1/4”
5/16”
3/8”
1/2”
5/8”
5/16”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
5/8”
3/4”
3/4”
HSBALANCE™
HSBALANCE™
Arbor Thread
1/4”-28
3/8”-24
1/2”-20
1/4”-28
3/8”-24
1/2”-20
5/8”-18
1/4”-28
3/8”-24
1/2”-20
5/8”-18
3/4”-16
1/4”28
3/8”-24
1/2”-20
5/8”-18
3/4”-16
3/8”-24
1/2”-20
1/2”-20
1/2”-20
5/8”-18
5/8”-18
5/8”-18
3/4”-16
3/4”-16
3/4”-16
1”-14
1”-14
SHELL MILL HOLDERS
Part Number
Taper
B4001-22
B4001-27
B4001-32
B4001-40
BT40
BT40
BT40
BT40
d
L
22mm
27mm
32mm
40mm
D
50mm
50mm
50mm
60mm
40mm
48mm
58mm
67mm
L1
19mm
21mm
24mm
27mm
Key Size
10mm
12mm
14mm
16mm
Arbor Thread
M10
M12
M16
M20
BT TAPER FACE MILL HOLDER
COLLET CHUCKS
D
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
BT TAPER SHELL MILL HOLDERS (METRIC)
BT50
BT50
2"
2-1/2"
L
3.00"
3.00"
Note: Face Mill Holders are supplied with four 5/8 - 11 mounting bolts.
D
5.06"
5.00"
L1
0.86"
1.18"
Key Size
3/4"
1"
DRILL CHUCKS
B50F1-2000
B50F1-2500
d
TAP HOLDERS
Taper
STUB, BORING, BLANK
Part Number
49
HSK63A SHELL MILL HOLDERS
D
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
SHELL MILL HOLDERS
Part Number
HSK63A-SM0750-3.00
HSK63A-SM0750-5.00
HSK63A-SM1000-3.00
HSK63A-SM1000-5.00
HSK63A-SM1250-3.00
HSK63A-SM1250-5.00
Taper
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
d
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
L
3.00”
5.00”
3.00”
5.00”
3.00”
5.00”
D
1.693"
1.693"
2.165"
2.165"
2.756"
2.756"
L1
0.669"
0.669"
0.669"
0.669"
0.669"
0.669"
Key Size
Arbor Thread
5/16”
5/16”
3/8”
3/8”
1/2”
1/2”
3/8”-24
3/8”-24
1/2”-20
1/2”-20
5/8”-18
5/8”-18
Key Size
Arbor Thread
5/16”
5/16”
3/8”
3/8”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/8”-24
3/8”-24
1/2”-20
1/2”-20
5/8”-18
5/8”-18
3/4”-16
3/4”-16
1”-14
1”-14
HSK100A SHELL MILL HOLDERS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
D
50
Part Number
HSK100A-SM0750-4.00
HSK100A-SM0750-6.00
HSK100A-SM1000-4.00
HSK100A-SM1000-6.00
HSK100A-SM1250-4.00
HSK100A-SM1250-6.00
HSK100A-SM1500-4.00
HSK100A-SM1500-6.00
HSK100A-SM2000-4.00
HSK100A-SM2000-6.00
Taper
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
d
3/4”
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
2”
2”
L
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
D
1.693"
1.693"
2.165"
2.165"
2.756"
2.756"
3.504"
3.504"
4.488"
4.488"
L1
0.669"
0.669"
0.669"
0.669"
0.669"
0.669"
0.902"
0.902"
0.902"
0.902"
Note: Coolant tubes are not included.
HSBALANCE™
Shell Mill Holders
HSBALANCE™
SHELL MILL HOLDERS
HSK100A
HSK100A
HSK100A
HSK100A
2”
2”
2-1/2”
2-1/2”
4.00”
6.00”
4.00”
6.00”
D
5.062"
5.062"
5.062"
5.062"
L1
0.866"
0.866"
0.866"
0.866"
Key Size
3/4”
3/4”
1.00”
1.00”
SHELL MILL HOLDERS
L
COLLET CHUCKS
d
DRILL CHUCKS
HSK100A-FM2000-4.00
HSK100A-FM2000-6.00
HSK100A-FM2500-4.00
HSK100A-FM2500-6.00
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
HSK100A FACE MILL HOLDER
51
NMTB TAPER SHELL MILL HOLDERS
D
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
SHELL MILL HOLDERS
Part Number
Taper
N3001-0500
N3001-0750
N3001-1000
N3001-1250
N4001-0500
N4001-0750
N4001-1000
N4001-1250
N4001-1500
N5001-0750
N5001-1000
N5001-1250
N5001-1500
N5001-2000
NMTB30
NMTB30
NMTB30
NMTB30
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
d
L
1/2”
3/4”
1”
1-1/4”
1/2”
3/4”
1”
1-1/4”
1-1/2”
3/4”
1”
1-1/4”
1-1/2”
2”
D
1.25”
1.31”
1.31”
1.44”
0.87”
0.87”
1.31”
1.50”
1.63”
1.25”
1.88”
1.88”
1.88”
1.88”
1.38”
2.00”
2.38”
2.88”
1.38”
1.94”
2.38”
2.88”
3.50”
2.00”
2.38”
2.88”
3.50”
4.38”
L1
0.57”
0.67”
0.67”
0.67”
0.57”
0.67”
0.67”
0.67”
0.93”
0.67”
0.67”
0.67”
0.93”
0.93”
Key Size
1/4”
5/16”
3/8”
1/2”
1/4”
5/16”
3/8”
1/2”
5/8”
5/16”
3/8”
1/2”
5/8”
3/4”
Arbor Thread
1/4”-28
3/8”-24
1/2”-20
5/8”-18
1/4”-28
3/8”-24
1/2”-20
5/8”-18
3/4”-16
3/8”-24
1/2”-20
5/8”-18
3/4”-16
1”-14
NMTB TAPER FACE MILL HOLDERS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
D
52
Part Number
Taper
N50F1-2000
N50F1-2500
NMTB50
NMTB50
d
2”
2-1/2”
L
3.00”
3.00”
D
5.05”
5.00”
Face Mill Holders are supplied with four 5/8 - 11 mounting bolts.
L1
0.87”
1.18”
Key Size
3/4”
1”
SHELL MILL HOLDERS
1.00”
1.00”
1.00”
1.00”
1.75”
D
1.38”
2.00”
2.38”
2.88”
3.50”
L1
0.57”
0.69”
0.69”
0.69”
0.94”
Key Size
1/4”
5/16”
3/8”
1/2”
5/8”
Arbor Thread
1/4”-28
3/8”-24
1/2”-20
5/8”-18
3/4”-16
SHELL MILL HOLDERS
1/2”
3/4”
1”
1-1/4”
1-1/2”
L
COLLET CHUCKS
R8
R8
R8
R8
R8
d
DRILL CHUCKS
850-032
850-048
850-064
850-080
850-096
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
R8 SHELL MILL HOLDERS
53
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
SHELL MILL HOLDERS
54
REPLACEMENT SHELL MILL HOLDER KEYS
Part Number
1/2-KEYSET
3/4-KEYSET
1-KEYSET
1-1/4-KEYSET
1-1/2-KEYSET
2-KEYSET
2-1/2-KEYSET
22-KEYSET
27-KEYSET
32-KEYSET
40-KEYSET
Description
Two
Two
Two
Two
Two
Two
Two
Two
Two
Two
Two
1/4” Locating Pins
5/16” Keys with Screws
1” Keys with Screws
10mm Keys with Screws
REPLACEMENT ARBOR SCREWS
Part Number
A5/8-11
A1/4-28
A3/8-24
A1/2-20
A5/8-18
A3/4-16
A1-14
A10mm-P1.5
A12mm-P1.75
A16mm-P2
A20mm-P2.5
Description
Face Mill Mounting Bolt
Use with 1/2” Holders
Use with 3/4” Holders
Use with 1” Holders
Use with 1-1/4” Holders
Use with 1-1/2” Holders
Use with 2” Holders
Use with 22.0mm Holders
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
55
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
56
ER COLLET CHUCKS
ER Chucks are used for precision work.
ER Collets provide greater gripping strength and higher precision than double angle collets.
To use: first insert the collet into the chuck nut by squeezing the collet and pressing its face into the chuck
nut’s retaining ring until the collet’s collar is fully seated. Then load the collet into the chuck, insert a cutting
tool, and tighten with the appropriate nut wrench.
To remove: simply squeeze the collet while pulling it from the chuck nut at an angle.
CT TAPER ER COLLET CHUCKS
D
Part Number
Taper
Collet Series
C4007-0008
C4017-0008
C4007-0011
C4017-0011
C4027-0011
C40S7-0016
C4007-0016
C4017-0016
C4007-0020
C4017-0020
C4027-0020
C4007-0025
C4017-0025
C4027-0025
C4007-0032
C4017-0032
C4007-0040
C4017-0040
C5007-0016
C5017-0016
C5027-0016
C5007-0020
C5017-0020
C5027-0020
C5037-0020
C5007-0025
C5017-0025
C5027-0025
C5037-0025
C5007-0032
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
ER8
ER8
ER11
ER11
ER11
ER16
ER16
ER16
ER20
ER20
ER20
ER25
ER25
ER25
ER32
ER32
ER40
ER40
ER16
ER16
ER16
ER20
ER20
ER20
ER20
ER25
ER25
ER25
ER25
ER32
Collet Range
.019-.196”
.019-.196”
.019-.275”
.019-.275”
.019-.275”
.019-.406”
.019-.406”
.019-.406”
.039-.511”
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.039-.629”
.078-.787”
.078-.787”
.118-1.023”
.118-1.023”
.019-.406”
.019-.406”
.019-.406”
.039-.511”
.039-.511”
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.039-.629”
.039-.629”
.078-.787”
L
L1
D
2.50”
4.00”
2.50”
4.00”
6.00”
2.25”
3.50”
6.00”
2.50”
4.00”
6.00”
2.50”
4.00”
6.00”
3.13”
5.00”
3.13”
5.00”
4.12”
6.00”
8.00”
2.50”
4.00”
6.00”
8.00”
2.50”
4.00”
6.00”
8.00”
4.00”
0.51”
0.51”
0.65”
0.65”
0.65”
0.87”
0.87”
0.87”
1.06”
1.06”
1.06”
1.18”
1.18”
1.18”
1.34”
1.34”
1.50”
1.50”
0.87”
0.87”
0.87”
1.06”
1.06”
1.06”
1.06”
1.18”
1.18”
1.18”
1.18”
1.34”
0.47”
0.47”
0.75”
0.75”
0.75”
1.26”
1.26”
1.26”
1.38”
1.38”
1.38”
1.65”
1.65”
1.65”
1.97”
1.97”
2.48”
2.48”
1.26”
1.26”
1.26”
1.38”
1.38”
1.38”
1.38”
1.65”
1.65”
1.65”
1.65”
1.97”
Part Number
Taper
Collet Series
C5017-0032
C5027-0032
C5007-0040
C5017-0040
C5027-0040
CT50
CT50
CT50
CT50
CT50
ER32
ER32
ER40
ER40
ER40
Collet Range
.078-.787”
.078-.787”
.118-1.023”
.118-1.023”
.118-1.023”
L
L1
D
6.00”
8.00”
4.00”
6.00”
8.00”
1.34”
1.34”
1.50”
1.50”
1.50”
1.97”
1.97”
2.48”
2.48”
2.48”
Note: Chucks are equipped with a left-hand-threaded stop screw and a chuck nut.
HSBalance™ ER Collet Chucks
Use HSBALANCE™ CT Taper ER Collet Chucks for high speed applications. See
Catalog.
HSBALANCE™
section in our Advanced Product
END MILL HOLDERS
CT TAPER ER COLLET CHUCKS (cont.)
MILLING CHUCKS
COLLET CHUCKS
CT TAPER ER COLLET CHUCKS (DIN)
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER40
ER40
ER16
ER16
ER16
ER20
ER20
ER20
ER25
ER25
ER25
ER32
ER32
ER32
ER40
ER40
ER40
Collet Range
.019-.406”
.019-.406”
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.078-.787”
.078-.787”
.118-1.023”
.118-1.023”
.019-.406”
.019-.406”
.019-.406”
.039-.511”
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.039-.629”
.078-.787”
.078-.787”
.078-.787”
.118-1.023”
.118-1.023”
.118-1.023”
L
L1
D
3.50”
6.00”
2.50”
4.00”
2.50”
4.00”
3.13”
5.00”
3.13”
5.00”
4.13”
6.00”
8.00”
2.50”
4.00”
6.00”
2.50”
4.00”
6.00”
4.00”
6.00”
8.00”
4.00”
6.00”
8.00”
0.87”
0.87”
1.18”
1.06”
1.18”
1.18”
1.89”
1.34”
2.05”
1.50”
0.87”
0.87”
0.87”
1.06”
1.06”
1.06”
1.18”
1.18”
1.18”
2.09”
1.34”
1.34”
2.13”
1.50”
1.50”
1.26”
1.26”
1.38”
1.38”
1.65”
1.65”
1.97”
1.97”
2.48”
2.48”
1.26”
1.26”
1.26”
1.38”
1.38”
1.38”
1.65”
1.65”
1.65”
1.97”
1.97”
1.97”
2.48”
2.48”
2.48”
DRILL CHUCKS
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
Collet Series
TAP HOLDERS
C4007-0016DIN
C4017-0016DIN
C4007-0020DIN
C4017-0020DIN
C4007-0025DIN
C4017-0025DIN
C4007-0032DIN
C4017-0032DIN
C4007-0040DIN
C4017-0040DIN
C5007-0016DIN
C5017-0016DIN
C5027-0016DIN
C5007-0020DIN
C5017-0020DIN
C5027-0020DIN
C5007-0025DIN
C5017-0025DIN
C5027-0025DIN
C5007-0032DIN
C5017-0032DIN
C5027-0032DIN
C5007-0040DIN
C5017-0040DIN
C5027-0040DIN
Taper
STUB, BORING, BLANK
Part Number
COLLET CHUCKS
SHELL MILL HOLDERS
D
57
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
58
NEW EXTENDED LENGTH COLLET CHUCKS
Part Number
Taper
Collet Series
L
L1
D
C4047-0008
C4047-0016
C4047-0020
C4047-0032
C5057-0016
C5057-0020
C5057-0032
C5057-0040
CT40
CT40
CT40
CT40
CT50
CT50
CT50
CT50
ER8
ER16
ER20
ER32
ER16
ER20
ER32
ER40
9.00"
9.00"
9.00"
9.00"
12.00"
12.00"
12.00"
12.00"
0.51"
0.87"
1.06"
1.34"
0.87"
1.06"
1.34"
1.50"
0.47"
1.26"
1.38"
1.97"
1.26"
1.38"
1.97"
2.48"
Collet Range
.019-.196"
.019-.406"
.039-.511"
.078-.787"
.019-.406"
.039-.511"
.078-.787"
.118-1.023"
COLLET CHUCKS
ER8
ER8
ER11
ER11
ER16
ER16
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER11
ER11
ER16
ER20
ER25
ER32
ER8
ER8
ER11
ER11
ER11
ER16
ER16
ER20
ER20
ER20
ER25
ER25
ER25
ER32
ER32
ER40
ER40
ER16
ER16
.019-.196”
.019-.196”
.019-.275”
.019-.275”
.019-.406”
.019-.406”
.019-.406”
.019-.406”
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.078-.787”
.078-.787”
.019-.275”
.019-.275”
.019-.406”
.039-.511”
.039-.629”
.078-.787”
.019-.196”
.019-.196”
.019-.275”
.019-.275”
.019-.275”
.019-.406”
.019-.406”
.039-.511”
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.039-.629”
.078-.787”
.078-.787”
.118-1.023”
.118-1.023”
.019-.406”
.019-.406”
L
L1
D
2.00”
4.00”
2.00”
4.00”
2.36”
4.00”
5.00”
6.00”
2.50”
4.00”
2.00”
4.00”
3.00”
5.00”
2.00”
4.00”
3.00”
2.50”
2.50”
3.00”
2.50”
4.00”
2.50”
4.00”
6.00”
3.50”
5.00”
2.50”
4.00”
6.00”
2.25”
4.00”
6.00”
3.13”
5.00”
3.13”
5.00”
4.12”
6.00”
0.51”
0.51”
0.65”
0.65”
0.87”
0.87”
0.87”
0.87”
1.06”
1.06”
1.18”
1.18”
1.34”
1.34”
0.65”
0.65”
0.87”
1.06”
1.18”
1.34”
0.51”
0.51”
0.65”
0.65”
0.65”
0.87”
0.87”
1.06”
1.06”
1.06”
1.18”
1.18”
1.18”
1.34”
1.34”
1.50”
1.50”
0.87”
0.87”
0.47”
0.47”
0.75”
0.75”
1.26”
1.26”
1.26”
1.26”
1.38”
1.38”
1.65”
1.65”
1.97”
1.97”
0.75”
0.75”
1.26”
1.38”
1.65”
1.97”
0.47”
0.47”
0.75”
0.75”
0.75”
1.26”
1.26”
1.38”
1.38”
1.38”
1.65”
1.65”
1.65”
1.97”
1.97”
2.50”
2.50”
1.26”
1.26”
SHELL MILL HOLDERS
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT35
BT35
BT35
BT35
BT35
BT35
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT50
BT50
Collet Range
COLLET CHUCKS
B3007-0008
B3017-0008
B3007-0011
B3017-0011
B3007-0016
B3017-0016
B3027-0016
B3037-0016
B3007-0020
B3017-0020
B3007-0025
B3017-0025
B3007-0032
B3017-0032
B3507-0011
B3517-0011
B3507-0016
B3507-0020
B3507-0025
B3507-0032
B4007-0008
B4017-0008
B4007-0011
B4017-0011
B4027-0011
B4007-0016
B4017-0016
B4007-0020
B4017-0020
B4027-0020
B4007-0025
B4017-0025
B4027-0025
B4007-0032
B4017-0032
B4007-0040
B4017-0040
B5007-0016
B5017-0016
Collet Series
DRILL CHUCKS
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
BT TAPER ER COLLET CHUCKS
59
BT TAPER ER COLLET CHUCKS (cont.)
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
Part Number
Taper
B5007-0020
B5017-0020
B5007-0025
B5017-0025
B5007-0032
B5017-0032
B5007-0040
B5017-0040
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
Collet Series
Collet Range
ER20
ER20
ER25
ER25
ER32
ER32
ER40
ER40
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.078-.787”
.078-.787”
.118-1.023”
.118-1.023”
L
L1
D
2.75”
4.00”
2.63”
4.00”
4.00”
6.00”
4.00”
6.00”
1.06”
1.06”
1.18”
1.18”
1.34”
1.34”
1.50”
1.50”
1.38”
1.38”
1.65”
1.65”
2.00”
2.00”
2.50”
2.50”
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
HSK63A ER COLLET CHUCKS
60
D
Part Number
HSK63A-ER16-3.00
HSK63A-ER16-5.00
HSK63A-ER20-3.00
HSK63A-ER20-5.00
HSK63A-ER25-3.00
HSK63A-ER25-5.00
HSK63A-ER32-4.00
HSK63A-ER32-6.00
HSK63A-ER40-4.00
HSK63A-ER40-6.00
Taper
Collet Series
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER40
ER40
Collet Range
.019-.393”
.019-.393”
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.078-.787”
.078-.787”
.118-1.023”
.118-1.023”
L
3.00”
5.00”
3.00”
5.00”
3.00”
5.00”
4.00”
6.00”
4.00”
6.00”
L1
0.866"
0.866"
1.062"
1.062"
1.181"
1.181"
1.260"
1.260"
1.496"
1.496"
D
1.260"
1.260"
1.378"
1.378"
1.654"
1.654"
1.969"
1.969"
2.480"
2.480"
COLLET CHUCKS
Part Number
HSK100A-ER16-4.00
HSK100A-ER16-6.00
HSK100A-ER20-4.00
HSK100A-ER20-6.00
HSK100A-ER25-4.00
HSK100A-ER25-6.00
HSK100A-ER32-4.00
HSK100A-ER32-6.00
HSK100A-ER40-4.00
HSK100A-ER40-6.00
Taper
Collet Series
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER40
ER40
Collet Range
L
.019-.393”
.019-.393”
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.078-.787”
.078-.787”
.118-1.023”
.118-1.023”
L1
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
4.00”
6.00”
0.866"
0.866"
1.062"
1.062"
1.181"
1.181"
1.260"
1.260"
1.496"
1.496"
D
1.260"
1.260"
1.378"
1.378"
1.654"
1.654"
1.969"
1.969"
2.480"
2.480"
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
HSK100A ER COLLET CHUCKS
COLLET CHUCKS
Note: Coolant tubes sold separately.
NMTB TAPER ER COLLET CHUCKS
Taper
N3007-0011
N3007-0016
N4007-0011
N4007-0016
N4007-0025
N5007-0016
N5007-0025
NMTB30
NMTB30
NMTB40
NMTB40
NMTB40
NMTB50
NMTB50
Collet Series
ER11
ER16
ER11
ER16
ER25
ER16
ER25
Collet Range
L
L1
D
.019-.275”
.019-.406”
.019-.275”
.019-.406”
.039-.629”
.019-.406”
.039-.629”
2.00”
1.77”
2.00”
1.77”
2.00”
2.00”
2.00”
0.65”
0.87”
0.65”
0.87”
1.18”
0.87”
1.18”
0.75”
1.26”
0.75”
1.26”
1.65”
1.26”
1.65”
STUB, BORING, BLANK
Part Number
TAP HOLDERS
DRILL CHUCKS
D
61
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
62
R8 COLLET CHUCKS
Part Number
Taper
R8007-0016
R8007-0020
R8007-0025
R8
R8
R8
Collet Series
ER16
ER20
ER25
Collet Range
L
L1
D
.019-.406”
.039-.511”
.039-.629”
1.00”
2.00”
2.50”
2.83”
1.50”
1.64”
1.25”
1.38”
1.66”
ER COLLET CHUCK EXTENSIONS
D
Part Number
Collet Series
ER8-EXT-500
ER8-EXT-625
E11-EXT
E11-EXT-500
E11-EXT-625
E16-EXT
E16-EXT-625
E16-EXT-750
E20-EXT-100
E20-EXT-125
E20-EXT-750
E25-EXT
E25-EXT-100
E25-EXT-750
E32-EXT-100
E32-EXT-125
ER8
ER8
ER11
ER11
ER11
ER16
ER16
ER16
ER20
ER20
ER20
ER25
ER25
ER25
ER32
ER32
Collet Range
.019-.196”
.019-.196”
.019-.275”
.019-.275”
.019-.275”
.019-.406”
.019-.406”
.019-.406”
.039-.511”
.039-.511”
.039-.511”
.039-.629”
.039-.629”
.039-.629”
.078-.787”
.078-.787”
D
D1
L
L1
1/2”
5/8”
3/4”
1/2”
5/8”
1”
5/8”
3/4”
1”
1-1/4”
3/4”
1-1/4”
1”
3/4”
1”
1-1/4”
0.47”
0.47”
0.75”
0.75”
0.75”
1.26”
1.26”
1.26”
1.38”
1.38”
1.38”
1.65”
1.65”
1.65”
1.97”
1.97”
5.95”
5.95”
5.65”
6.11”
6.11”
5.89”
6.48”
6.48”
6.40”
6.40”
6.67”
6.00”
6.85”
6.85”
7.09”
7.09”
0.75”
0.75”
0.91”
0.91”
0.91”
1.28”
1.28”
1.28”
1.48”
1.48”
1.48”
1.65”
1.65”
1.65”
1.85”
1.85”
L2
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
5.00”
COLLET CHUCKS
The Most Complete Range of ER Collets Available Anywhere
Every inch and metric size available in both standard and
patented coolant-thru designs in our most popular series.
ER Collets are ideal for high speed/high precision drilling
operations.
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
Precision ER Collets
TAP HOLDERS
Coolant-thru collets are sealed by design. They contain
no wearable rubber or silicone and do not require special
nuts or discs.
• Unique patented design is solid steel.
• No discs, plugs or other hardware are needed.
• No rubber or silicone to wear out.
• Maximum pressure of 1000psi.
STUB, BORING, BLANK
ER Coolant Collets feature a patented staggered slot design
that prevents coolant from reaching the collet’s face.
DRILL CHUCKS
• Tolerance: Guaranteed to be within 0.0003” at the collet’s nose.
• Accuracy: Less than 0.0004” at 4 x D
63
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
ER SERIES 8 COLLETS (metric) Size Range: 0.5 - 5.0mm (.019 - .196”)
Part Number
ER8-039
ER8-059
ER8-078
ER8-098
ER8-118
ER8-137
ER8-157
ER8-177
ER8-196
ER8-09S
Size
Collapse range
1.0mm
1.0-0.5mm
1.5mm
1.5-1.0mm
2.0mm
2.0-1.5mm
2.5mm
2.5-2.0mm
3.0mm
3.0-2.5mm
3.5mm
3.5-3.0mm
4.0mm
4.0-3.5mm
4.5mm
4.5-4.0mm
5.0mm
5.0-4.5mm
9 Piece Set 0.5mm - 5.0mm by 0.5mm
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
ER SERIES 11 COLLETS SIZE RANGE: 1/32 - 17/64”
Part Number
E11-002
E11-003
E11-004
E11-005
E11-006
E11-007
E11-008
E11-009
E11-010
E11-011
E11-012
E11-013
E11-014
E11-015
E11-016
E11-017
E11-14S
TAP HOLDERS
STUB, BORING, BLANK
1/32"
3/64"
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
11/64"
3/16"
13/64"
7/32"
15/64"
1/4"
17/64"
14 Piece Set
Collapse range
1/32" - .0233"
3/64" - 1/32"
1/16" - 3/64"
5/64" - 1/16"
3/32" - 5/64"
7/64" - 3/32"
1/8" - 7/64"
9/64" - 1/8"
5/32" - 9/64"
11/64" - 5/32"
3/16" - 11/64"
13/64" - 3/16"
7/32" - 13/64"
15/64" - 7/32"
1/4" - 15/64"
17/64" - 1/4"
1/16" - 1/4" by 64ths
ER SERIES 11 COLLETS (metric) SIZE RANGE: .05 - 7.0MM (.019 - 0.275)
Part Number
64
Size
E11-039
E11-059
E11-078
E11-098
E11-118
E11-137
E11-157
E11-177
E11-196
E11-216
E11-236
E11-255
E11-275
E11-12S
Size
1.0mm
1.5mm
2.0mm
2.5mm
3.0mm
3.5mm
4.0mm
4.5mm
5.0mm
5.5mm
6.0mm
6.5mm
7.0mm
12 Piece Set 1.0mm - 7.0mm
Collapse range
1.0-0.5mm
1.5-1.0mm
2.0-1.5mm
2.5-2.0mm
3.0-2.5mm
3.5-3.0mm
4.0-3.5mm
4.5-4.0mm
5.0-4.5mm
5.5-5.0mm
6.0-5.5mm
6.5-6.0mm
7.0-6.5mm
by 0.5mm
COLLET CHUCKS
SIZE RANGE: 4.0 - 7.0mm
Part Number
E11-157(C)
E11-177(C)
E11-196(C)
E11-216(C)
E11-236(C)
E11-255(C)
E11-275(C)
E11-7S(C)
Size
4.0mm
4.5mm
5.0mm
5.5mm
6.0mm
6.5mm
7.0mm
7 Piece Set 3.9mm -
Collapse range
4.0mm - 3.9mm
4.5mm - 4.4mm
5.0mm - 4.9mm
5.5mm - 5.4mm
6.0mm - 5.9mm
6.5mm - 6.4mm
7.0mm - 6.9mm
7.0mm by 0.5mm
See dimensional data for ER Collets
on page 107
END MILL HOLDERS
Note: Our patented ER Coolant Collets are
designed for use with cylindrical shank
tools (no flats). Cutting tool should be
inserted the full length of the collet. If
these conditions are not met, coolant
leakage may result. Seals up to maximum
coolant pressure of 1000 PSI.
SHELL MILL HOLDERS
ER SERIES 11 COOLANT COLLETS (metric)
COLLET CHUCKS
3/16"
.187" - .183"
13/64"
.203" - .199"
7/32"
.218" - .214"
15/64"
.234" - .230"
1/4"
.250" - .246"
17/64"
.265" - .261"
6 Piece Set 3/16” - 17/64” by 64ths
DRILL CHUCKS
Collapse range
TAP HOLDERS
E11-012(C)
E11-013(C)
E11-014(C)
E11-015(C)
E11-016(C)
E11-017(C)
E11-6S(C)
Size
STUB, BORING, BLANK
Part Number
MILLING CHUCKS
ER SERIES 11 COOLANT COLLETS SIZE RANGE: 3/16 - 17/64”
65
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
66
Part Number
E16-002
E16-004
E16-006
E16-008
E16-010
E16-012
E16-014
E16-016
E16-018
E16-020
E16-022
E16-024
E16-026
E16-12S
Size
Collapse range
1/32”
1/32" - 0.0233"
1/16”
1/16" - 1/32"
3/32”
3/32" - 1/16"
1/8”
1/8" - 3/32"
5/32”
5/32" - 1/8"
3/16”
3/16" -5/32"
7/32”
7/32" - 3/16"
1/4”
1/4" - 7/32"
9/32”
9/32" - 1/4"
5/16”
5/16" - 9/32"
11/32”
11/32" - 5/16"
3/8”
3/8" - 11/32"
13/32”
13/32" - 3/8"
12 Piece Set 1/32" - 13/32" by 32nds
ER SERIES 16 COLLETS (metric)
SIZE RANGE: 1.0 - 13.0mm (0.039-0.511”)
Part Number
E16-039
E16-059
E16-078
E16-098
E16-118
E16-137
E16-157
E16-177
E16-196
E16-216
E16-236
E16-255
E16-275
E16-295
E16-314
E16-334
E16-354
E16-374
E16-393
E16-09S
Size
Collapse range
1.0mm
1.0-0.5mm
1.5mm
1.5-1.0mm
2.0mm
2.0-1.5mm
2.5mm
2.5-2.0mm
3.0mm
3.0-2.5mm
3.5mm
3.5-3.0mm
4.0mm
4.0-3.5mm
4.5mm
4.5-4.0mm
5.0mm
5.0-4.5mm
5.5mm
5.5-5.0mm
6.0mm
6.0-5.5mm
6.5mm
6.5-6.0mm
7.0mm
7.0-6.5mm
7.5mm
7.5-7.0mm
8.0mm
8.0-7.5mm
8.5mm
8.5-8.0mm
9.0mm
9.0-8.5mm
9.5mm
9.5-9.0mm
10.0mm
10.0-9.5mm
9 Piece Set 1.0mm - 10.0mm by 1mm
COLLET CHUCKS
Part Number
E16-157(C)
E16-177(C)
E16-196(C)
E16-216(C)
E16-236(C)
E16-255(C)
E16-275(C)
E16-295(C)
E16-314(C)
E16-334(C)
E16-354(C)
E16-374(C)
E16-393(C)
E16-13S(C)
Size
on page 107
END MILL HOLDERS
SHELL MILL HOLDERS
COLLET CHUCKS
3/32"
.0937" - .0897"
7/64"
.109" - .105"
1/8"
.125" - .121"
9/64"
.140" - .136"
5/32"
.156" - .152"
11/64"
.171" - .167"
3/16"
.187" - .183
13/64"
.203" - .199"
7/32"
7/32" - 13/64"
15/64"
15/64" - 7/32"
1/4"
1/4" - 15/64"
17/64"
17/64" - 1/4"
9/32"
9/32" -17/64"
19/64"
19/64" - 9/32"
5/16"
5/16" - 19/64"
21/64"
21/64" - 5/16"
11/32"
11/32" - 21/64"
23/64"
23/64" - 11/32"
3/8"
3/8" - 23/64"
25/64"
25/64" - 3/8"
13/32"
13/32" - 25/64"
11 Piece Set 3/32" - 13/32" by 32nds
Collapse range
4.0mm
4.0mm - 3.9mm
4.5mm
4.5mm - 4.4mm
5.0mm
5.0mm - 4.5mm
5.5mm
5.5mm - 5.0mm
6.0mm
6.0mm - 5.5mm
6.5mm
6.5mm - 6.0mm
7.0mm
7.0mm - 6.5mm
7.5mm
7.5mm - 7.0mm
8.0mm
8.0mm - 7.5mm
8.5mm
8.5mm - 8.0mm
9.0mm
9.0mm - 8.5mm
9.5mm
9.5mm - 9.0mm
10.0mm
DRILL CHUCKS
E16-006(C)
E16-007(C)
E16-008(C)
E16-009(C)
E16-010(C)
E16-011(C)
E16-012(C)
E16-013(C)
E16-014(C)
E16-015(C)
E16-016(C)
E16-017(C)
E16-018(C)
E16-019(C)
E16-020(C)
E16-021(C)
E16-022(C)
E16-023(C)
E16-024(C)
E16-025(C)
E16-026(C)
E16-11S(C)
Collapse range
TAP HOLDERS
Size
STUB, BORING, BLANK
Part Number
MILLING CHUCKS
ER SERIES 16 COOLANT COLLETS SIZE RANGE: 3/32” - 13/32”
67
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
Part Number
Size
Collapse range
E20-004
E20-006
E20-008
E20-010
E20-012
E20-014
E20-016
E20-018
E20-020
E20-022
E20-024
E20-026
E20-028
E20-030
E20-032
E20-15S
1/16"
3/32"
1/8"
5/32"
3/16"
7/32"
1/4"
9/32"
5/16"
11/32"
3/8"
13/32"
7/16"
15/32"
1/2"
15 Piece Set 1/16" -
1/16" - 1/32"
3/32" - 1/16"
1/8" - 3/32"
5/32" - 1/8"
3/16" - 5/32"
7/32" - 3/16"
1/4" - 7/32"
9/32" - 1/4"
5/16" - 9/32"
11/32" - 5/16"
3/8" - 11/32"
13/32" - 3/8"
7/16" - 13/32"
15/32" - 7/16"
1/2" - 15/32"
1/2" by 32nds
SIZE RANGE: 1.0 - 13.0mm (0.039” - 0.511”)
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
Part Number
68
E20-078
E20-118
E20-137
E20-157
E20-196
E20-236
E20-275
E20-314
E20-354
E20-393
E20-433
E20-452
E20-472
E20-511
E20-11S
Size
Collapse range
2.0mm
2.0-1.0mm
3.0mm
3.0-2.5mm
3.5mm
3.5-2.5mm
4.0mm
4.0-3.5mm
5.0mm
5.0-4.0mm
6.0mm
6.0-5.0mm
7.0mm
7.0-6.0mm
8.0mm
8.0-7.0mm
9.0mm
9.0-8.0mm
10.0mm
10.0-9.0mm
11.0mm
11.0-10.0mm
11.5mm
11.5-11.0mm
12.0mm
12.0-11.0mm
13.0mm
13.0-12.0mm
COLLET CHUCKS
E20-010(C)
E20-011(C)
E20-012(C)
E20-013(C)
E20-014(C)
E20-015(C)
E20-016(C)
E20-017(C)
E20-018(C)
E20-019(C)
E20-020(C)
E20-021(C)
E20-022(C)
E20-023(C)
E20-024(C)
E20-025(C)
E20-026(C)
E20-027(C)
E20-028(C)
E20-029(C)
E20-030(C)
E20-031(C)
E20-032(C)
E20-12S(C)
5/32"
11/64"
3/16"
13/64"
7/32"
15/64"
1/4"
17/64"
9/32"
19/64"
5/16"
21/64"
11/32"
23/64"
3/8"
25/64"
13/32"
27/64"
7/16"
29/64"
15/32"
31/64"
1/2"
12 Piece Set 5/32"
.156" - .152"
.171" - .167"
187" - .183
.203" - .199"
7/32" - 13/64"
15/64" - 7/32"
1/4" - 15/64"
17/64" - 1/4"
9/32" - 17/64"
19/64" - 9/32"
5/16" - 19/64"
21/64" - 5/16"
11/32" - 21/64"
23/64" - 11/32"
3/8" - 23/64"
25/64" - 3/8"
13/32" - 25/64"
27/64" - 13/32"
7/16" - 27/64"
29/64" - 7/16"
15/32" - 29/64"
31/64" - 15/32"
1/2" - 31/64"
- 1/2" by 32nds
on page 107
END MILL HOLDERS
Collapse range
SHELL MILL HOLDERS
Size
COLLET CHUCKS
Part Number
MILLING CHUCKS
SIZE RANGE: 5.0 - 130.mm
5.0mm - 4.9mm
5.5mm - 5.4mm
6.0mm - 5.5mm
6.5mm - 6.0mm
7.0mm - 6.5mm
7.5mm - 7.0mm
8.0mm - 7.5mm
8.5mm - 8.0mm
9.0mm - 8.5mm
9.5mm - 9.0mm
10.0mm - 9.5mm
10.5mm - 10.0mm
11.0mm - 10.5mm
11.5mm - 11.0mm
12.0mm - 11.5mm
12.5mm - 12.0mm
13.0mm - 12.5mm
13.0mm by 0.5mm
DRILL CHUCKS
5.0mm
5.5mm
6.0mm
6.5mm
7.0mm
7.5mm
8.0mm
8.5mm
9.0mm
9.5mm
10.0mm
10.5mm
11.0mm
11.5mm
12.0mm
12.5mm
13.0mm
17 Piece Set 5.0mm -
Collapse range
TAP HOLDERS
E20-196(C)
E20-216(C)
E20-236(C)
E20-255(C)
E20-275(C)
E20-295(C)
E20-314(C)
E20-334(C)
E20-354(C)
E20-374(C)
E20-393(C)
E20-413(C)
E20-433(C)
E20-452(C)
E20-472(C)
E20-492(C)
E20-511(C)
E20-17S(C)
Size
STUB, BORING, BLANK
Part Number
69
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
70
ER SERIES 25 COLLETS SIZE RANGE: 1/16” - 5/8”
Part Number
E25-004
E25-006
E25-008
E25-010
E25-012
E25-014
E25-016
E25-018
E25-020
E25-022
E25-024
E25-026
E25-028
E25-030
E25-032
E25-034
E25-036
E25-038
E25-040
E25-19S
Size
1/16"
3/32"
1/8"
5/32"
3/16"
7/32"
1/4"
9/32"
5/16"
11/32"
3/8"
13/32"
7/16"
15/32"
1/2"
17/32"
9/16"
19/32"
5/8"
19 Piece Set 1/16" -
Collapse range
1/16" - 1/32"
3/32" - 1/16"
1/8" - 3/32"
5/32" - 1/8"
3/16" - 5/32"
7/32" - 3/16"
1/4" - 7/32"
9/32" - 1/4"
5/16" - 9/32"
11/32 - 5/16"
3/8" - 11/32"
13/32" - 3/8"
7/16" - 13/32"
15/32" - 7/16"
1/2" - 15/32"
17/32" - 1/2"
9/16" - 17/32"
19/32" - 9/16"
5/8" - 19/32"
5/8" by 32nds
SIZE RANGE: 1.0 - 16.0mm (0.039” - 0.629”)
Part Number
E25-078
E25-118
E25-137
E25-157
E25-196
E25-236
E25-275
E25-314
E25-354
E25-393
E25-433
E25-452
E25-472
E25-511
E25-551
E25-590
E25-629
E25-14S
Size
Collapse range
2.0mm
2.0-1.0mm
3.0mm
3.0-2.0mm
3.5mm
3.5-2.5mm
4.0mm
4.0-3.0mm
5.0mm
5.0-4.0mm
6.0mm
6.0-5.0mm
7.0mm
7.0-6.0mm
8.0mm
8.0-7.0mm
9.0mm
9.0-8.0 mm
10.0mm
10.0-9.0mm
11.0mm
11.0-10.0mm
11.5mm
11.5-11.0mm
12.0mm
12.0-11.0mm
13.0mm
13.0-12.0mm
14.0mm
14.0-13.0mm
15.0mm
15.0-14.0mm
16.0mm
16.0-15.0mm
COLLET CHUCKS
on page 107
END MILL HOLDERS
SHELL MILL HOLDERS
7/32" - 13/64"
15/64" - 7/32"
1/4" - 15/64"
17/64" - 1/4"
9/32" - 17/64"
19/64" - 9/32"
5/16" - 19/64"
21/64" - 5/16"
11/32" - 21/64"
23/64" - 11/32"
3/8" - 23/64"
25/64" - 3/8"
13/32" - 25/64"
27/64" - 13/32"
7/16" - 27/64"
29/64" - 7/16"
15/32" - 29/64"
31/64" - 15/32"
1/2" - 31/64"
33/64" - 1/2"
17/32" - 33/64"
35/64" - 17/32"
9/16" - 35/64"
37/64" - 9/16"
19/32" - 37/64"
39/64" - 19/32"
5/8" - 39/64"
- 5/8" by 32nds
COLLET CHUCKS
7/32"
15/64"
1/4"
17/64"
9/32"
19/64"
5/16"
21/64"
11/32"
23/64"
3/8"
25/64"
13/32"
27/64"
7/16"
29/64"
15/32"
31/64"
1/2"
33/64"
17/32"
35/64"
9/16"
37/64"
19/32"
39/64"
5/8"
13 Piece Set 1/4"
DRILL CHUCKS
E25-014(C)
E25-015(C)
E25-016(C)
E25-017(C)
E25-018(C)
E25-019(C)
E25-020(C)
E25-021(C)
E25-022(C)
E25-023(C)
E25-024(C)
E25-025(C)
E25-026(C)
E25-027(C)
E25-028(C)
E25-029(C)
E25-030(C)
E25-031(C)
E25-032(C)
E25-033(C)
E25-034(C)
E25-035(C)
E25-036(C)
E25-037(C)
E25-038(C)
E25-039(C)
E25-040(C)
E25-13S(C)
Collapse range
TAP HOLDERS
Size
STUB, BORING, BLANK
Part Number
MILLING CHUCKS
71
COLLET CHUCKS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
72
Part Number
on page 107
E25-236(C)
E25-255(C)
E25-275(C)
E25-295(C)
E25-314(C)
E25-334(C)
E25-354(C)
E25-374(C)
E25-393(C)
E25-413(C)
E25-433(C)
E25-452(C)
E25-472(C)
E25-492(C)
E25-511(C)
E25-531(C)
E25-551(C)
E25-570(C)
E25-590(C)
E25-610(C)
E25-629(C)
E25-21S(C)
Size
6.0mm
6.5mm
7.0mm
7.5mm
8.0mm
8.5mm
9.0mm
9.5mm
10.0mm
10.5mm
11.0mm
11.5mm
12.0mm
12.5mm
13.0mm
13.5mm
14.0mm
14.5mm
15.0mm
15.5mm
16.0mm
21 Piece Set 6.0mm
Collapse range
6.0mm - 5.9mm
6.5mm - 6.4mm
7.0mm - 6.9mm
7.5mm - 7.4mm
8.0mm - 7.9mm
8.5mm - 8.0mm
9.0mm - 8.9mm
9.5mm - 9.4mm
10.0mm - 9.5mm
10.5mm - 10.0mm
11.0mm - 10.5mm
11.5mm - 11.0mm
12.0mm - 11.5mm
12.5 - 12.0mm
13.0mm - 12.5mm
13.5mm - 13.0mm
14.0mm - 13.5mm
14.5mm - 14.0mm
15.0mm - 14.5mm
15.5mm - 15.0mm
16.0mm - 15.5mm
- 16.0mm by 0.5mm
SIZE RANGE: 2 - 20mm (0.078” - 0.787”)
Part Number
E32-118
E32-137
E32-157
E32-196
E32-236
E32-275
E32-314
E32-354
E32-393
E32-433
E32-452
E32-472
E32-511
E32-551
E32-590
E32-629
E32-669
E32-708
E32-748
E32-767
E32-787
E32-18S
Size
Collapse range
3.0mm
3.0-2.0mm
3.5mm
3.5-2.5mm
4.0mm
4.0-3.0mm
5.0mm
5.0-4.0mm
6.0mm
6.0-5.0mm
7.0mm
7.0-6.0mm
8.0mm
8.0-7.0mm
9.0mm
9.0-8.0mm
10.0mm
10.0-9.0mm
11.0mm
11.0-10.0mm
11.5mm
11.5-10.5mm
12.0mm
12.0-11.0mm
13.0mm
13.0-12.0mm
14.0mm
14.0-13.0mm
15.0mm
15.0-14.0mm
16.0mm
16.0-15.0mm
17.0mm
17.0-16.0mm
18.0mm
18.0-17.0mm
19.0mm
19.0-18.0mm
19.5mm
19.5-18.5mm
20.0mm
20.0-19.0mm
END MILL HOLDERS
1/8" - 3/32"
5/32" - 1/8"
3/16" - 5/32"
7/32" - 3/16"
1/4" - 7/32"
9/32" - 1/4"
5/16" - 9/32"
11/32" - 5/16"
3/8" - 11/32"
13/32" - 3/8"
7/16" - 13/32"
15/32" - 7/16"
1/2" - 15/32"
17/32" - 1/2"
9/16" - 17/32"
19/32" - 9/16"
5/8" - 19/32"
21/32" - 5/8"
11/16" - 21/32"
23/32" - 11/16"
3/4" - 23/32"
25/32" - 3/4"
3/4" by 32nds
SHELL MILL HOLDERS
1/8"
5/32"
3/16"
7/32"
1/4"
9/32"
5/16"
11/32"
3/8"
13/32"
7/16"
15/32"
1/2"
17/32"
9/16"
19/32"
5/8"
21/32"
11/16"
23/32"
3/4"
25/32"
21 Piece Set 1/8" -
COLLET CHUCKS
E32-008
E32-010
E32-012
E32-014
E32-016
E32-018
E32-020
E32-022
E32-024
E32-026
E32-028
E32-030
E32-032
E32-034
E32-036
E32-038
E32-040
E32-042
E32-044
E32-046
E32-048
E32-050
E32-21S
Collapse range
DRILL CHUCKS
Size
TAP HOLDERS
Part Number
STUB, BORING, BLANK
ER SERIES 32 COLLETS SIZE RANGE: 1/8” - 25/32”
MILLING CHUCKS
COLLET CHUCKS
73
COLLET CHUCKS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
74
on page 107
Part Number
Size
E32-016(C)
E32-017(C)
E32-018(C)
E32-019(C)
E32-020(C)
E32-021(C)
E32-022(C)
E32-023(C)
E32-024(C)
E32-025(C)
E32-026(C)
E32-027(C)
E32-028(C)
E32-029(C)
E32-030(C)
E32-031(C)
E32-032(C)
E32-033(C)
E32-034(C)
E32-035(C)
E32-036(C)
E32-037(C)
E32-038(C)
E32-039(C)
E32-040(C)
E32-041(C)
E32-042(C)
E32-043(C)
E32-044(C)
E32-045(C)
E32-046(C)
E32-047(C)
E32-048(C)
E32-049(C)
E32-050(C)
E32-17S(C)
1/4"
17/64"
9/32"
19/64"
5/16"
21/64"
11/32"
23/64"
3/8"
25/64"
13/32"
27/64"
7/16"
29/64"
15/32"
31/64"
1/2"
33/64"
17/32"
35/64"
9/16"
37/64"
19/32"
39/64"
5/8"
41/64"
21/32"
43/64"
11/16"
45/64"
23/32"
47/64"
3/4"
49/64"
25/32"
17 Piece Set 1/4"
Collapse range
1/4" - 15/64"
17/64" - 1/4"
9/32" - 17/64"
19/64" - 9/32"
5/16" - 19/64"
21/64" - 5/16"
11/32" - 21/64"
23/64" - 11/32"
3/8" - 23/64"
25/64" - 3/8"
13/32" - 25/64"
27/64" - 13/32"
7/16" - 27/64"
29/64" - 7/16"
15/32" - 29/64"
31/64" - 15/32"
1/2" - 31/64"
33/64" - 1/2"
17/32" - 33/64"
35/64" - 17/32"
9/16" - 35/64"
37/64" - 9/16"
19/32" - 37/64"
39/64" - 19/32"
5/8" - 39/64"
41/64" - 5/8"
21/32" - 41/64"
43/64" - 21/32"
11/16" - 43/64"
45/64" - 11/16"
23/32" - 45/64"
47/64" - 23/32"
3/4" - 47/64"
49/64" - 3/4"
25/32" - 49/64"
- 3/4" by 32nds
COLLET CHUCKS
MILLING CHUCKS
END MILL HOLDERS
on page 107
SHELL MILL HOLDERS
COLLET CHUCKS
10.0mm - 9.9mm
10.5mm - 10.4mm
11.0mm - 10.9mm
11.5mm - 11.4mm
12.0mm - 11.9mm
12.5mm - 12.4mm
13.0mm - 12.9mm
13.5mm - 13.0mm
14.0mm - 13.5mm
14.5mm - 14.4mm
15.0mm - 14.9mm
15.5mm - 15.4mm
16.0mm - 15.5mm
16.5mm - 16.0mm
17.0mm - 16.5mm
17.5mm - 17.0mm
18.0mm - 17.5mm
18.5mm - 18.0mm
19.0mm - 18.5mm
19.5mm - 19.0mm
20.0mm - 19.5mm
20.0mm by 0.5mm
DRILL CHUCKS
10.0mm
10.5mm
11.0mm
11.5mm
12.0mm
12.5mm
13.0mm
13.5mm
14.0mm
14.5mm
15.0mm
15.5mm
16.0mm
16.5mm
17.0mm
17.5mm
18.0mm
18.5mm
19.0mm
19.5mm
20.0mm
21 Piece Set 10.0mm -
Collapse range
TAP HOLDERS
E32-393(C)
E32-413(C)
E32-433(C)
E32-452(C)
E32-472(C)
E32-492(C)
E32-511(C)
E32-531(C)
E32-551(C)
E32-570(C)
E32-590(C)
E32-610(C)
E32-629(C)
E32-649(C)
E32-669(C)
E32-688(C)
E32-708(C)
E32-728(C)
E32-748(C)
E32-767(C)
E32-787(C)
E32-21S(C)
Size
STUB, BORING, BLANK
Part Number
75
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
76
ER SERIES 40 COLLETS SIZE RANGE: 5/32” - 1”
Part Number
Size
E40-010
E40-012
E40-014
E40-016
E40-018
E40-020
E40-022
E40-024
E40-026
E40-028
E40-030
E40-032
E40-034
E40-036
E40-038
E40-040
E40-042
E40-044
E40-046
E40-048
E40-050
E40-052
E40-054
E40-056
E40-058
E40-060
E40-062
E40-064
E40-25S
5/32"
3/16"
7/32"
1/4"
9/32"
5/16"
11/32"
3/8"
13/32"
7/16"
15/32"
1/2"
17/32"
9/16"
19/32"
5/8"
21/32"
11/16"
23/32"
3/4"
25/32"
13/16"
27/32"
7/8"
29/32"
15/16"
31/32"
1"
25 Piece Set 1/4"
Collapse range
5/32" - 1/8"
3/16" - 5/32"
7/32" - 3/16"
1/4" - 7/32"
9/32" - 1/4"
5/16" - 9/32"
11/32 - 5/16"
3/8" - 11/32"
13/32" - 3/8"
7/16" - 13/32"
15/32" - 7/16"
1/2" - 15/32"
17/32" - 1/2"
9/16" - 17/32"
19/32" - 9/16"
5/8" - 19/32"
21/32" - 5/8"
11/16" - 21/32"
23/32" - 11/16"
3/4" - 23/32"
25/32 - 3/4"
13/16" - 25/32"
27/32" - 13/16"
7/8" - 27/32"
29/32" - 7/8"
15/16" - 29/32"
31/32" - 15/16"
1" - 31/32"
- 1" by 32nds
COLLET CHUCKS
on page 107
SHELL MILL HOLDERS
4.0mm
4.0-3.0mm
5.0mm
5.0-4.0mm
6.0mm
6.0-5.0mm
7.0mm
7.0-6.0mm
8.0mm
8.0-7.0mm
9.0mm
9.0-8.0 mm
10.0mm
10.0-9.0mm
11.0mm
11.0-10.0mm
11.5mm
11.5-10.5mm
12.0mm
12.0-11.0mm
13.0mm
13.0-12.0mm
14.0mm
14.0-13.0mm
15.0mm
15.0-14.0mm
16.0mm
16.0-15.0mm
17.0mm
17.0-16.0mm
18.0mm
18.0-17.0mm
19.0mm
19.0-18.0mm
19.5mm
19.5-18.5mm
20.0mm
20.0-19.0mm
21.0mm
21.0-20.0mm
22.0mm
22.0-21.0mm
23.0mm
23.0-22.0mm
24.0mm
24.0-23.0mm
25.0mm
25.0-24.0mm
26.0mm
26.0-25.0mm
COLLET CHUCKS
Collapse range
DRILL CHUCKS
E40-157
E40-196
E40-236
E40-275
E40-314
E40-354
E40-393
E40-433
E40-452
E40-472
E40-511
E40-551
E40-590
E40-629
E40-669
E40-708
E40-748
E40-767
E40-787
E40-826
E40-866
E40-905
E40-944
E40-984
E40-1023
E40-23S
Size
TAP HOLDERS
Part Number
STUB, BORING, BLANK
SIZE RANGE: 3 - 26mm (0.118” - 1.023”)
END MILL HOLDERS
MILLING CHUCKS
77
COLLET CHUCKS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
78
Part Number
E40-393(C)
E40-413(C)
E40-433(C)
E40-452(C)
E40-472(C)
E40-492(C)
E40-511(C)
E40-531(C)
E40-551(C)
E40-570(C)
E40-590(C)
E40-610(C)
E40-629(C)
E40-649(C)
E40-669(C)
E40-688(C)
E40-708(C)
E40-728(C)
E40-748(C)
E40-767(C)
E40-787(C)
E40-807(C)
E40-826(C)
E40-846(C)
E40-866(C)
E40-885(C)
E40-905(C)
E40-925(C)
E40-944(C)
E40-964(C)
E40-984(C)
E40-1003(C)
E40-1023(C)
E40-33S(C)
Size
Collapse range
10.0mm
10.0mm - 9.9mm
10.5mm
10.5mm- 10.4mm
11.0mm
11.0mm - 10.9mm
11.5mm
11.5mm - 11.4mm
12.0mm
12.0mm - 11.9mm
12.5mm
12.5mm - 12.4mm
13.0mm
13.0mm - 12.9mm
13.5mm
13.5mm - 13.4mm
14.0mm
14.0mm - 13.9mm
14.5mm
14.5mm - 14.4mm
15.0mm
15.0mm - 14.9mm
15.5mm
15.5mm - 15.4mm
16.0mm
16.0mm - 15.9mm
16.5mm
16.5mm - 16.4mm
17.0mm
17.0mm - 16.9mm
17.5mm
17.5mm - 17.4mm
18.0mm
18.0mm - 17.5mm
18.5mm
18.5mm - 18.0mm
19.0mm
19.0mm - 18.5mm
19.5mm
19.5mm - 19.0mm
20.0mm
20.0mm - 19.5mm
20.5mm
20.5mm - 20.0mm
21.0mm
21.0mm - 20.5mm
21.5mm
21.5mm - 21.0mm
22.0mm
22.0mm - 21.5mm
22.5mm
22.5mm - 22.0mm
23.0mm
23.0mm - 22.5mm
23.5mm
23.5mm - 23.0mm
24.0mm
24.0mm - 23.5mm
24.5mm
24.5mm - 24.0mm
25.0mm
25.0mm - 24.5mm
25.5mm
25.5mm - 25.0mm
26.0mm
26.0mm - 25.0mm
COLLET CHUCKS
on page 107
SHELL MILL HOLDERS
12.0mm
12.0-11.0mm
13.0mm
13.0-12.0mm
14.0mm
14.0-13.0mm
15.0mm
15.0-14.0mm
16.0mm
16.0-15.0mm
17.0mm
17.0-16.0mm
18.0mm
18.0-17.0mm
19.0mm
19.0-18.0mm
20.0mm
20.0-19.0mm
21.0mm
21.0-20.0mm
22.0mm
22.0-21.0mm
23.0mm
23.0-22.0mm
24.0mm
24.0-23.0mm
25.0mm
25.0-24.0mm
26.0mm
26.0-25.0mm
27.0mm
27.0-26.0mm
28.0mm
28.0-27.0mm
29.0mm
29.0-28.0mm
30.0mm
30.0-29.0mm
31.0mm
31.0-30.0mm
32.0mm
32.0-31.0mm
33.0mm
33.0-32.0mm
34.0mm
34.0-33.0mm
COLLET CHUCKS
Collapse range
DRILL CHUCKS
E50-472
E50-511
E50-551
E50-590
E50-629
E50-669
E50-708
E50-748
E50-787
E50-826
E50-866
E50-905
E50-944
E50-984
E50-1023
E50-1062
E50-1102
E50-1141
E50-1181
E50-1220
E50-1259
E50-1299
E50-1338
E50-23S
Size
TAP HOLDERS
Part Number
STUB, BORING, BLANK
SIZE RANGE: 11 - 34mm (0.433” - 1.338”)
END MILL HOLDERS
MILLING CHUCKS
79
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
80
ER TAP COLLETS
ER Tap Collets feature a unique design that incorporates an internal square drive with our popular
ER Series collets. The square drive matches the tap square, providing a tight fit for all rigid tapping
applications. Utilizing Lyndex-Nikken’s ER tap collets and standard ER collet chuck (available in 4 different gauge lengths) allows you to vary the gauge length of your tapping application without the need
for special tap holders.
D
L1
Part Number
Tap Size Inch
Tap Size Metric
L1
Ø
ET16-168
ET16-194
ET16-220
ET16-255
ET20-168
ET20-194
ET20-220
ET20-255
ET20-318
ET20-323
ET20-367
ET20-381
ET25-168
ET25-194
ET25-220
ET25-255
ET25-318
ET25-323
ET25-367
ET25-381
ET25-429
ET25-437
ET25-480
ET32-168
ET32-194
ET32-220
ET32-255
ET32-318
ET32-323
ET32-367
ET32-381
ET32-429
ET32-437
#8, 5/32”
#10, 3/16”
#12, 7/32”
#14, 1/4”
#8, 5/32”
#10, 3/16”
#12, 7/32”
#14, 1/4”
5/16”
7/16”
1/2”
3/8”
#8, 5/32”
#10, 3/16”
#12, 7/32”
#14, 1/4”
5/16”
7/16”
1/2”
3/8”
9/16”
1/8” NPT(L)
5/8”
#8, 5/32”
#10, 3/16”
#12, 7/32”
#14, 1/4”
5/16”
7/16”
1/2”
3/8”
9/16”
1/8” NPT
M4
M4.5, M5
M6, M6.5
M4
M4.5, M5
M6, M6.5
M7, M6.5
M12, M12.5
M10
M4
M4.5, M5
M6, M6.5
M7, M6.5
M12, M12.5
M10
M14
M16
M4
M4.5, M5
M6, M6.5
M7, M6.5
M12, M12.5
M10
M14
-
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
22.0mm
22.0mm
25.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
22.0mm
22.0mm
.168
.194
.220
.255
.168
.194
.220
.255
.318
.323
.367
.381
.168
.194
.220
.255
.318
.323
.367
.381
.429
.437
.480
.168
.194
.220
.255
.318
.323
.367
.381
.429
.437
.131
.152
.165
.191
.131
.152
.165
.191
.238
.242
.275
.286
.131
.152
.165
.191
.238
.242
.275
.286
.322
.328
.360
.131
.152
.165
.191
.238
.242
.275
.286
.322
.328
M16
M18
M20
M6, M6.5
M7, M6.5
M12, M12.5
M10
M14
M16
M18
M20
M22
M24
M25
See dimensional data for ER Collets on page 107
25.0mm
25.0mm
25.0mm
25.0mm
25.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
22.0mm
22.0mm
25.0mm
25.0mm
25.0mm
25.0mm
25.0mm
25.0mm
25.0mm
25.0mm
25.0mm
28.0mm
.480
.542
.562
.590
.652
.255
.318
.323
.367
.381
.429
.437
.480
.542
.562
.590
.652
.687
.697
.700
.760
.800
.360
.406
.421
.442
.489
.191
.238
.242
.275
.286
.322
.328
.360
.406
.421
.442
.489
.515
.523
.531
.570
.600
END MILL HOLDERS
5/8”
11/16”
1/4” NPT
3/4”
13/16”
#14, 1/4”
5/16”
7/16”
1/2”
3/8”
9/16”
1/8” NPT
5/8”
11/16”
1/4” NPT
3/4”
13/16”
1/2” NPT
7/8”
3/8” NPT
15/16”
1”
Ø
SHELL MILL HOLDERS
ET32-480
ET32-542
ET32-562
ET32-590
ET32-652
ET40-255
ET40-318
ET40-323
ET40-367
ET40-381
ET40-429
ET40-437
ET40-480
ET40-542
ET40-562
ET40-590
ET40-652
ET40-687
ET40-697
ET40-700
ET40-760
ET40-800
L1
COLLET CHUCKS
Tap Size Metric
DRILL CHUCKS
Tap Size Inch
TAP HOLDERS
Part Number
STUB, BORING, BLANK
ER TAP COLLETS (cont.)
MILLING CHUCKS
COLLET CHUCKS
81
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
ER TAP COOLANT COLLETS
ER Tap Collets feature a unique design that incorporates an internal square drive with our popular
ER Series collets. The square drive matches the tap square, providing a tight fit for all rigid tapping
applications. Utilizing Lyndex-Nikken’s ER tap collets and standard ER collet chuck (available in 4 different gauge lengths) allows you to vary the gauge length of your tapping application without the need
for special tap holders. Lyndex-Nikken has now combined the versatility of our ER tapping collets with
the popularity of our coolant collets to create our patented ER Coolant Tap Collets.
D
Part Number
Tap Size Inch
Tap Size Metric
L1
Ø
ET16-255(C)
ET16-318(C)
ET20-255(C)
ET20-318(C)
ET20-323(C)
ET20-367(C)
ET20-381(C)
ET25-318(C)
ET25-323(C)
ET25-367(C)
ET25-381(C)
ET25-429(C)
ET25-480(C)
ET32-255(C)
ET32-318(C)
ET32-323(C)
ET32-367(C)
ET32-381(C)
ET32-429(C)
ET32-480(C)
ET32-542(C)
ET32-590(C)
ET32-652(C)
ET40-323(C)
ET40-367(C)
ET40-381(C)
ET40-429 (C)
ET40-480(C)
ET40-542(C)
ET40-590(C)
ET40-652(C)
ET40-697(C)
ET40-760(C)
ET40-800(C)
#14, 1/4”
5/16”
#14, 1/4”
5/16”
7/16”
1/2”
3/8”
5/16”
7/16”
1/2”
3/8”
9/16”
5/8”
#14, 1/4”
5/16”
7/16”
1/2”
3/8”
9/16”
5/8”
11/16”
3/4”
13/16”
7/16”
1/2”
3/8”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
1”
M6, M6.5
M7, M6.5
M6, M6.5
M7, M6.5
M12, M12.5
M10
M7, M6.5
M12, M12.5
M10
M14
M16
M6, M6.5
M7, M6.5
M12, M12.5
M10
M14
M16
M18
M20
M12, M12.5
M10
M14
M16
M18
M20
M22
M24
M25
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
22.0mm
25.0mm
18.0mm
18.0mm
18.0mm
18.0mm
18.0mm
22.0mm
25.0mm
25.0mm
25.0mm
25.0mm
18.0mm
18.0mm
18.0mm
22.0mm
25.0mm
25.0mm
25.0mm
25.0mm
25.0mm
25.0mm
28.0mm
.255
.318
.255
.318
.323
.367
.381
.318
.323
.367
.381
.429
.480
.255
.318
.323
.367
.381
.429
.480
.542
.590
.652
.323
.367
.381
.429
.480
.542
.590
.652
.697
.760
.800
Note: Seals up to maximum coolant pressure of 1000 PSI.
82
.191
.238
.191
.238
.242
.275
.286
.238
.242
.275
.286
.322
.360
.191
.238
.242
.275
.286
.322
.360
.406
.422
.489
.242
.275
.286
.322
.360
.406
.422
.489
.523
.570
.600
DELUXE ER COLLETS SETS
Part Number
Includes E11-KIT RACK, E11-EXT, E11-12S
Includes E20-KIT RACK, E20-EXT-100, E20-11S
Includes E32-KIT RACK, E32-EXT-125, E32-12S
ER COLLET RACKS
ER11
ER16
ER20
ER25
ER32
ER40
collet
collet
collet
collet
collet
collet
rack,
rack,
rack,
rack,
rack,
rack,
21
21
28
18
21
18
collet
collet
collet
collet
collet
collet
capacity
capacity
capacity
capacity
capacity
capacity
ER KIT RACKS
Part Number
ER11–KIT
ER16–KIT
ER20–KIT
ER25–KIT
ER32–KIT
RACK
RACK
RACK
RACK
RACK
Description
Holds
Holds
Holds
Holds
Holds
(1)
(1)
(1)
(1)
(1)
ER11
ER16
ER20
ER25
ER32
extension
extension
extension
extension
extension
and
and
and
and
and
20
12
14
14
18
collets
collets
collets
collets
collets
SHELL MILL HOLDERS
ER11–RACK
ER16–RACK
ER20–RACK
ER25–RACK
ER32–RACK
ER40–RACK
Description
COLLET CHUCKS
Part Number
DRILL CHUCKS
ER11–KIT
ER16–KIT
ER20–KIT
ER25–KIT
ER32–KIT
Description
END MILL HOLDERS
These form-fitted racks are made from specially treated premium hardwood.
MILLING CHUCKS
COLLET CHUCKS
ER8-NUT
E11-NUT
E16-NUT
E20-NUT
E25-NUT
E32-NUT
E40-NUT
Description
ER8 Complete Nut
ER11 Complete (Hex) Nut
ER16 Complete Nut
ER20 Complete Nut
ER25 Complete Nut
ER32 Complete Nut
ER40 Complete Nut
STUB, BORING, BLANK
Part Number
TAP HOLDERS
REPLACEMENT ER CHUCK NUTS
83
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
ER REPLACEMENT NUT PARTS
Part Number
ER16-1
ER20-1
ER25-1
ER32-1
ER40-1
DRILL CHUCKS
TAP HOLDERS
STUB, BORING, BLANK
ER16
ER20
ER25
ER32
ER40
Nut
Nut
Nut
Nut
Nut
Bearing/Spacer
Bearing/Spacer
Bearing/Spacer
Bearing/Spacer
Bearing/Spacer
Set
Set
Set
Set
Set
ER CHUCK NUT WRENCHES
Part Number
08-HSSPAN
011–HEX
016–SPAN
020–SPAN
025–SPAN
032–SPAN
040–SPAN
011–HEX(TORQUE)
016–SPAN(TORQUE)
020–SPAN(TORQUE)
025–SPAN(TORQUE)
032–SPAN(TORQUE)
040–SPAN(TORQUE)
Description
Fits ER8 Chuck Nut
Fits ER11 Chuck Nut
Fits ER16 Chuck Nut
Fits ER20 Chuck Nut
Fits ER25 Chuck Nut
Fits ER32 Chuck Nut
Fits ER40 Chuck Nut
ER11 Torque Hex Wrench
ER16 Torque Spanner Wrench
Note: (Torque) indicates adapter to be used with torque wrench.
REPLACEMENT ER BACKUP SCREWS
Part Number
84
Description
ER8-3
ER11-3
ER16-3
ER20-3
ER25-3
ER32-3
ER40-3
Description
ER8 Backup Screws
ER11 Backup Screws
ER16 Backup Screws
ER20 Backup Screws
ER25 Backup Screws
ER32 Backup Screws
ER40 Backup Screws
COLLET CHUCKS
MILLING CHUCKS
TG COLLET CHUCKS
TG Chucks are used for precision work.
TG Collets provide greater grip strength and higher precision than double angle collets.
CT TAPER TG COLLET CHUCKS
Collet Range
C4007-0250
C4017-0250
C4007-0500
C4017-0500
C40S7-0750
C4007-0750
C4017-0750
C40S7-1000
C4007-1000
C4017-1000
C4007-1500
C4507-0750
C4507-1000
C4517-1000
C4507-1500
C4517-1500
C5007-0500
C5017-0500
C5007-0750
C5017-0750
C5007-1000
C5017-1000
C5027-1000
C5037-1000
C5007-1500
C5017-1500
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT40
CT45
CT45
CT45
CT45
CT45
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
CT50
25TG
25TG
50TG
50TG
75TG
75TG
75TG
100TG
100TG
100TG
150TG
75TG
100TG
100TG
150TG
150TG
50TG
50TG
75TG
75TG
100TG
100TG
100TG
100TG
150TG
150TG
3/64-1/4”
3/64-1/4”
1/8-1/2”
1/8-1/2”
3/64-3/4”
3/64-3/4”
3/64-3/4”
3/64-1”
3/64-1”
3/64-1”
1/2-1-1/2”
3/64-3/4”
3/64-1”
3/64-1”
1/2-1-1/2”
1/2-1-1/2”
1/8-1/2”
1/8-1/2”
3/64-3/4”
3/64-3/4”
3/64-1”
3/64-1”
3/64-1”
3/64-1”
1/2-1-1/2”
1/2-1-1/2”
L
2.25”
4.00”
2.50”
4.00”
2.50”
3.00”
5.00”
2.75”
3.50”
5.50”
6.00”
3.50”
3.50”
5.50”
4.00”
5.50”
2.50”
4.00”
3.50”
5.50”
3.50”
5.50”
7.50”
10.00”
3.50”
6.00”
L1
D
0.61”
0.61”
1.30”
1.30”
1.61”
1.61”
1.61”
2.13”
2.13”
2.13”
2.88”
1.61”
2.12”
2.12”
2.80”
2.87”
1.30”
1.30”
1.61”
1.61”
2.13”
2.13”
2.13”
2.13”
2.88”
2.88”
0.75”
0.75”
1.34”
1.34”
1.89”
1.89”
1.89”
2.50”
2.50”
2.50”
3.50”
1.89”
2.50”
2.50”
3.50”
3.50”
1.34”
1.34”
1.89”
1.89”
2.50”
2.50”
2.50”
3.50”
3.50”
3.50”
COLLET CHUCKS
Collet Series
DRILL CHUCKS
Taper
TAP HOLDERS
Part Number
SHELL MILL HOLDERS
END MILL HOLDERS
D
STUB, BORING, BLANK
Note: Chucks are equipped with a left-hand-threaded stop screw and a chuck nut.
For high speed applications, refer to the HSBALANCE™ section in the Advanced Products Catalog.
85
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
86
CT TAPER TG COLLET CHUCKS (DIN)
D
Part Number
C4007-1000DIN
C4007-1500DIN
C5007-0750DIN
C5017-0750DIN
C5007-1000DIN
C5017-1000DIN
C5027-1000DIN
C5007-1500DIN
C5017-1500DIN
Taper
Collet Series
Collet Range
L
L1
D
CT40
CT40
CT50
CT50
CT50
CT50
CT50
CT50
CT50
100TG
150TG
75TG
75TG
100TG
100TG
100TG
150TG
150TG
3/64-1”
1/2-1-1/2”
3/64-3/4”
3/64-3/4”
3/64-1”
3/64-1”
3/64-1"
1/2-1-1/2”
1/2-1-1/2”
3.50”
6.00”
3.50”
5.50”
3.50”
5.50”
7.50"
3.50”
6.00”
2.32”
2.88”
1.61”
1.61”
2.13”
2.13”
2.12"
2.87”
3.94”
2.50”
3.50”
1.89”
1.89”
2.50”
2.50”
2.50"
3.50”
3.50”
To use: first insert the collet into the chuck nut by squeezing the collet and pressing its face into the chuck nut’s
retaining ring until the collet’s collar is fully seated. Then load the assembly into the chuck, insert a cutting tool, and
tighten with the appropriate nut wrench to the recommended tightening torque.
To remove: simply squeeze the collet while pulling it from the chuck nut at an angle. Our handy 100TG or 150TG
Collet Squeezers ease the removal of these larger collets.
COLLET CHUCKS
L
L1
D
B3007-0250
B3017-0250
B3007-0500
B3017-0500
B3007-0750
B3007-1000
B3507-0250
B3517-0250
B3507-0500
B3517-0500
B3507-0750
B3507-1000
B4007-0250
B4017-0250
B4007-0500
B4017-0500
B4007-0750
B4007-1000
B4017-1000
B4007-1500
B4507-0750
B4507-1000
B4517-1000
B4507-1500
B4517-1500
B5007-0500
B5017-0500
B5007-0750
B5017-0750
B5007-1000
B5017-1000
B5007-1500
B5017-1500
BT30
BT30
BT30
BT30
BT30
BT30
BT35
BT35
BT35
BT35
BT35
BT35
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT45
BT45
BT45
BT45
BT45
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
25TG
25TG
50TG
50TG
75TG
100TG
25TG
25TG
50TG
50TG
75TG
100TG
25TG
25TG
50TG
50TG
75TG
100TG
100TG
150TG
75TG
100TG
100TG
150TG
150TG
50TG
50TG
75TG
75TG
100TG
100TG
150TG
150TG
3/64-1/4”
3/64-1/4”
1/8-1/2”
1/8-1/2”
3/64-3/4”
3/64-1”
3/64-1/4”
3/64-1/4”
1/8-1/2”
1/8-1/2”
3/64-3/4”
3/64-1”
3/64-1/4”
3/64-1/4”
1/8-1/2”
1/8-1/2”
3/64-3/4”
3/64-1”
3/64-1”
1/2-1-1/2”
3/64-3/4”
3/64-1”
3/64-1”
1/2-1-1/2”
1/2-1-1/2”
1/8-1/2”
1/8-1/2”
3/64-3/4”
3/64-3/4”
3/64-1”
3/64-1”
1/2-1-1/2”
1/2-1-1/2”
1.75”
4.00”
2.00”
4.00”
2.50”
3.94”
1.75”
4.00”
2.00”
4.00”
2.50”
3.13”
2.00”
4.00”
2.25”
4.00”
3.00”
3.50”
5.50”
5.50”
3.50”
3.50”
5.50”
4.00”
5.50”
2.63”
4.00”
3.50”
5.50”
3.50”
5.50”
4.00”
6.00”
0.61”
0.61”
1.30”
1.30”
1.61”
2.24”
0.61”
0.61”
1.30”
1.30”
1.61”
2.24”
0.61”
0.61”
1.30”
1.30”
1.61”
2.13”
2.13”
2.87”
1.60”
2.13”
2.13”
2.87”
2.87”
1.30”
1.30”
1.61”
1.61”
2.13”
2.13”
2.87”
2.87”
0.75”
0.75”
1.34”
1.34”
1.89”
2.50”
0.75”
0.75”
1.34”
1.34”
1.89”
2.50”
0.75”
0.75”
1.34”
1.34”
1.89”
2.50”
2.50”
3.50”
1.89”
2.50”
2.50”
3.50
3.50”
1.34”
1.34”
1.89”
1.89”
2.50”
2.50”
3.50”
3.50”
SHELL MILL HOLDERS
Collet Range
COLLET CHUCKS
Collet Series
DRILL CHUCKS
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
BT TAPER TG COLLET CHUCKS
87
NMTB TAPER TG COLLET CHUCKS
D
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
88
Part Number
Taper
Collet Series
Collet Range
L
L1
D
N3007-0750
N3007-1000
N4007-0750
N4007-1000
N4007-1500
N5007-0750
N5007-1000
N5007-1500
NMTB30
NMTB30
NMTB40
NMTB40
NMTB40
NMTB50
NMTB50
NMTB50
75TG
100TG
75TG
100TG
150TG
75TG
100TG
150TG
3/64-3/4”
3/64-1”
3/64-3/4”
3/64-1”
1/2-1-1/2”
3/64-3/4”
3/64-1”
1/2-1-1/2”
2.50”
3.94”
2.50”
3.00”
5.00”
3.00”
3.50”
5.00”
1.61”
2.24”
1.61”
2.12”
2.87”
1.61”
2.12”
2.87”
1.89”
2.50”
1.89”
2.50”
3.50”
1.89”
2.50”
3.50”
R8 100TG COLLET CHUCK
D
Part Number
Taper
Collet Series
Collet Range
L
L1
D
R8007-1000
R8
100TG
3/64-1"
3.25"
2.17"
2.50"
COLLET CHUCKS
MILLING CHUCKS
FEATURES OF STRAIGHT SHANK TOOLING
STRAIGHT SHANK TG COLLET CHUCKS
D
Collet Series
Collet Range
D
S1007-0750
S1207-1000
S1507-1000
75TG
100TG
100TG
3/64-3/4”
3/64-1”
3/64-1”
1.00”
1.25”
1.50”
L
7.50”
5.33”
9.00”
L1
L2
D1
2.08”
2.73”
2.73”
5.00”
2.28”
6.00”
1.89”
2.50”
2.50”
COLLET CHUCKS
Part Number
SHELL MILL HOLDERS
END MILL HOLDERS
• Straight shank tooling may be used to extend tooling reach for extended length operations.
• This option is less costly than extended length integral shank tooling.
• They may be used with any size machining center or lathe.
• When loaded into larger holders, their reduced O.D. permits drilling operations within large holes
or whenever tight clearances are encountered.
MORSE TAPER TG COLLET CHUCKS
Taper
Collet Series
M0307-1000
M0407-1000
MT 3
MT 4
100TG
100TG
Collet Range
3/64-1”
3/64-1”
L
L1
D
3.25”
3.25”
2.73”
2.73”
2.50”
2.50”
STUB, BORING, BLANK
Part Number
TAP HOLDERS
DRILL CHUCKS
D
89
MILLING CHUCKS
COLLET CHUCKS
LYNDEX TG COLLETS - PRECISE!
TG Standard Collets collapse approximately 1/64”. Precisely machined to exacting standards, TG Collets are a
good choice for high speed/high precision milling and drilling operations.
• Tolerance: Guaranteed to be within 0.0003” at the collet’s nose.
• Accuracy: Less than 0.0005” at 4 x D
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
25TG COLLETS
Part Number
Size
Part Number
Size
025-003
025-004
025-005
025-006
025-007
025-008
025-009
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
025-010
025-011
025-012
025-013
025-014
025-015
025-016
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
25TG COLLETS SETS
Part Number
025-113
50TG COLLETS
STUB, BORING, BLANK
Description
13 Piece 25TG Collet Set: 1/16” - 1/14” by 64ths
Size Range: 1/8 - 1/2”
Part Number
Size
Part Number
Size
050-008
050-009
050-010
050-011
050-012
050-013
050-014
050-015
050-016
050-017
050-018
050-019
050-020
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
050-021
050-022
050-023
050-024
050-025
050-026
050-027
050-028
050-029
050-030
050-031
050-032
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
50TG COLLETS SETS
Part Number
90
Size Range: 3/64 - 1/4”
050-113
050-125
Description
13 Piece 50TG Collet Set: 1/8” - 1/2” by 32nds
25 Piece 50TG Collet Set: 1/8” - 1/2” by 64ths
COLLET CHUCKS
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
075-026
075-027
075-028
075-029
075-030
075-031
075-032
075-033
075-034
075-035
075-036
075-037
075-038
075-039
075-040
075-041
075-042
075-043
075-044
075-045
075-046
075-047
075-048
13/32”
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
75TG COLLETS SETS
Part Number
075-112
075-117
075-123
075-127
075-145
Description
12
17
23
27
45
Piece
Piece
Piece
Piece
Piece
75TG
75TG
75TG
75TG
75TG
Collet
Collet
Collet
Collet
Collet
Set:
Set:
Set:
Set:
Set:
1/16” - 3/4” by 16ths
1/8” - 3/8” by 64ths
1/16” - 3/4” by 32nds
3/32” - 1/2” by 64ths
1/16” - 3/4” by 64ths
See dimensional data for TG Collets
on page 107
END MILL HOLDERS
075-003
075-004
075-005
075-006
075-007
075-008
075-009
075-010
075-011
075-012
075-013
075-014
075-015
075-016
075-017
075-018
075-019
075-020
075-021
075-022
075-023
075-024
075-025
SHELL MILL HOLDERS
Size
COLLET CHUCKS
Part Number
DRILL CHUCKS
Size
TAP HOLDERS
Part Number
MILLING CHUCKS
Size Range: 3/64 - 3/4”
STUB, BORING, BLANK
75TG COLLETS
91
COLLET CHUCKS
MILLING CHUCKS
75TG COOLANT COLLETS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
Part Number
92
Note: Our TG coolant collets seals up to maximum coolant pressure of 750 PSI.
075-008(S)
075-009(S)
075-010(S)
075-011(S)
075-012(S)
075-013(S)
075-014(S)
075-015(S)
075-016(S)
075-017(S)
075-018(S)
075-019(S)
075-020(S)
075-021(S)
075-022(S)
075-023(S)
075-024(S)
075-025(S)
075-026(S)
075-027(S)
075-028(S)
Size
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
7/16”
Size Range: 1/8 - 3/4”
Part Number
075-029(S)
075-030(S)
075-031(S)
075-032(S)
075-033(S)
075-034(S)
075-035(S)
075-036(S)
075-037(S)
075-038(S)
075-039(S)
075-040(S)
075-041(S)
075-042(S)
075-043(S)
075-044(S)
075-045(S)
075-046(S)
075-047(S)
075-048(S)
Size
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
COLLET CHUCKS
100-003
100-004
100-005
100-006
100-007
100-008
100-009
100-010
100-011
100-012
100-013
100-014
100-015
100-016
100-017
100-018
100-019
100-020
100-021
100-022
100-023
100-024
100-025
100-026
100-027
100-028
100-029
100-030
100-031
100-032
100-033
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
100-034
100-035
100-036
100-037
100-038
100-039
100-040
100-041
100-042
100-043
100-044
100-045
100-046
100-047
100-048
100-049
100-050
100-051
100-052
100-053
100-054
100-055
100-056
100-057
100-058
100-059
100-060
100-061
100-062
100-063
100-064
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
49/64”
25/32”
51/64”
13/16”
53/64”
27/32”
55/64”
7/8”
57/64”
29/32”
59/64”
15/16”
61/64”
31/32”
63/64”
1”
100TG COLLET SETS
8 Piece 100TG Standard Collet Set: 1/8” - 1” by 8ths
21 Piece 100TG Standard Collet Set: 3/8” - 1” by 32nds
23 Piece 100TG Coolant Collet Set: 1/16” - 3/4” by 32nds
30 Piece 100TG Standard Collet Set: 3/32” - 1” by 32nds
45 Piece 100TG Standard Collet Set: 1/16” - 3/4” by 64ths
TAP HOLDERS
100-108
100-111
100-115
100-121
100-123
100-130
100-141
100-145
100-159
Description
STUB, BORING, BLANK
Part Number
on page 107
END MILL HOLDERS
Size
SHELL MILL HOLDERS
Part Number
COLLET CHUCKS
Size
DRILL CHUCKS
Part Number
MILLING CHUCKS
100TG COLLETS Size Range: 3/64 - 1”
93
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
100TG COLLETS (METRIC) Size Range: 4 - 26mm
Part Number
Size
Part Number
Size
100-204
100-206
100-208
100-210
100-212
100-214
100-216
4mm
6mm
8mm
10mm
12mm
14mm
16mm
100-218
100-220
100-222
100-224
100-225
100-226
18mm
20mm
22mm
24mm
25mm
26mm
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
NON-PULL 100TG COLLETS Size Range: 3/8 - 1”
94
Part Number
Size
Part Number
Size
100-324
100-332
100-340
3/8”
1/2”
5/8”
100-348
100-356
100-364
3/4”
7/8”
1”
COLLET CHUCKS
100TG COOLANT COLLETS (METRIC) Size Range: 6 - 26MM
Part Number
100-206(S)
100-208(S)
100-210(S)
100-212(S)
100-214(S)
100-216(S)
Size
6mm
8mm
10mm
12mm
14mm
16mm
Part Number
100-218(S)
100-220(S)
100-222(S)
100-224(S)
100-225(S)
100-226(S)
END MILL HOLDERS
Note: Our TG coolant collets seals up to maximum coolant pressure of 750 PSI.
on page 107
SHELL MILL HOLDERS
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
49/64”
25/32”
51/64”
13/16”
53/64”
27/32”
55/64”
7/8”
57/64”
29/32”
59/64”
15/16”
61/64”
31/32”
63/64”
1”
COLLET CHUCKS
100-041(S)
100-042(S)
100-043(S)
100-044(S)
100-045(S)
100-046(S)
100-047(S)
100-048(S)
100-049(S)
100-050(S)
100-051(S)
100-052(S)
100-053(S)
100-054(S)
100-055(S)
100-056(S)
100-057(S)
100-058(S)
100-059(S)
100-060(S)
100-061(S)
100-062(S)
100-063(S)
100-064(S)
Size
Size
18mm
20mm
22mm
24mm
25mm
26mm
DRILL CHUCKS
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
Part Number
TAP HOLDERS
100-016(S)
100-017(S)
100-018(S)
100-019(S)
100-020(S)
100-021(S)
100-022(S)
100-023(S)
100-024(S)
100-025(S)
100-026(S)
100-027(S)
100-028(S)
100-029(S)
100-030(S)
100-031(S)
100-032(S)
100-033(S)
100-034(S)
100-035(S)
100-036(S)
100-037(S)
100-038(S)
100-039(S)
100-040(S)
Size
STUB, BORING, BLANK
Part Number
MILLING CHUCKS
100TG COOLANT COLLETS Size Range: 1/4 - 1”
95
COLLET CHUCKS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
150TG COLLETS Size Range: 1/2 - 1-1/2”
Part Number
on page 107
Size
150-032
150-033
150-034
150-035
150-036
150-037
150-038
150-039
150-040
150-041
150-042
150-043
150-044
150-045
150-046
150-047
150-048
150-049
150-050
150-051
150-052
150-053
150-054
150-055
150-056
150-057
150-058
150-059
150-060
150-061
150-062
150-063
150-064
Part Number
Size
150-065
150-066
150-067
150-068
150-069
150-070
150-071
150-072
150-073
150-074
150-075
150-076
150-077
150-078
150-079
150-080
150-081
150-082
150-083
150-084
150-085
150-086
150-087
150-088
150-089
150-090
150-091
150-092
150-093
150-094
150-095
150-096
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
49/64”
25/32”
51/64”
13/16”
53/64”
27/32”
55/64”
7/8”
57/64”
29/32”
59/64”
15/16”
61/64”
31/32”
63/64”
1”
1-1/64”
1-1/32”
1-3/64”
1-1/16”
1-5/64”
1-3/32”
1-7/64”
1-1/8”
1-9/64”
1-5/32”
1-11/64”
1-3/16”
1-13/64”
1-7/32”
1-15/64”
1-1/4”
1-17/64”
1-9/32”
1-19/64”
1-5/16”
1-21/64”
1-11/32”
123/64”
1-3/8”
1-25/64”
1-13/32”
1-27/64”
1-7/16”
1-29/64”
1-15/32”
1-31/64”
1-1/2”
STUB, BORING, BLANK
TAP HOLDERS
150TG COLLET SETS
96
Part Number
150-113
150-117
150-125
150-133
150-149
150-165
Description
13
17
25
33
49
65
Piece
Piece
Piece
Piece
Piece
Piece
150TG
150TG
150TG
150TG
150TG
150TG
Collet
Collet
Collet
Collet
Collet
Collet
Set:
Set:
Set:
Set:
Set:
Set:
3/4”
1/2”
3/4”
1/2”
3/4”
1/2”
-
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
by
by
by
by
by
by
16ths
16ths
32nds
32nds
64ths
64ths
100TG Collet Squeezer
150TG Collet Squeezer
100TG COLLET RACK
This deluxe rack is made of specially treated premium hardwood.
100TG COLLET RACK
Part Number
100TG-RACK
Description
100TG Collet Rack, 40 Collet Capacity
END MILL HOLDERS
100TG-PULL
150TG-PULL
Description
SHELL MILL HOLDERS
Part Number
COLLET CHUCKS
TG COLLET SQUEEZERS
DRILL CHUCKS
Collet squeezers are handy for quickly removing 100TG and 150TG collets from collet chuck nuts.
Simply remove the cutting tool from your collet, slip a collet squeezer over the back end of the collet,
and press down. The collapsed collet will slip out of the chuck nut.
TAP HOLDERS
TG COLLET SQUEEZERS
STUB, BORING, BLANK
TG COLLET ACCESSORIES
MILLING CHUCKS
COLLET CHUCKS
97
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
REPLACEMENT TG CHUCK NUTS
Part Number
25TG-NUT
50TG-NUT
75TG-NUT
100TG-NUT
100TG-HEXNUT
150TG-NUT
Description
25TG Complete Hex Nut
50TG Complete Nut
75TG Complete Nut
100TG Complete Nut
100TG Complete Hex Nut
150TG Complete Nut
REPLACEMENT TG CHUCK NUT PARTS
SHELL MILL HOLDERS
Part Number
50TG-1
75TG-1
100TG-1
150TG-1
Description
50TG Nut Bearing/Spacer Set
DRILL CHUCKS
COLLET CHUCKS
TG CHUCK NUT WRENCHES
Part Number
25TG-HEX
50TG-SPAN
75TG-SPAN
100TG-SPAN
150TG-SPAN
50TG-SPAN(Torque)
75TG-SPAN(Torque)
100TG-SPAN(Torque)
150TG-SPAN(Torque)
Description
Fits 25TG Chuck Nuts
50TG Torque Spanner Wrench
Note: (Torque) indicates adapter to be used with torque wrench.
STUB, BORING, BLANK
TAP HOLDERS
REPLACEMENT TG BACKUPSCREWS
98
Part Number
25TG-3
50TG-3
75TG-3
75TG-3C
100TG-3
100TG-3C
150TG-3
150G-3C
Description
25TG
50TG
75TG
75TG Coolant
100TG
100TG Coolant
150TG
150TG Coolant
COLLET CHUCKS
MILLING CHUCKS
DOUBLE ANGLE COLLETS
Double Angle Collets may be successfully employed for most routine applications, except milling.
DA Collets are precision ground for accurate seating within the collet chucks.
Lyndex-Nikken recommends using TG or ER Collet Systems for more precise machining.
Their inherent design characteristics assure excellent toolholding capability and better precision.
Collet Range
L
L1
D
C4007-0100
C4017-0100
C4007-0180
C4017-0180
C4007-0200
C4007-0300
C4507-0180
C5007-0180
C5017-0180
CT40
CT40
CT40
CT40
CT40
CT40
CT45
CT50
CT50
100DA
100DA
180DA
180DA
200DA
300DA
180DA
180DA
180DA
3/64-9/16”
3/64-9/16”
3/64-3/4”
3/64-3/4”
3/64-3/8”
3/64-1/4”
3/64-3/4”
3/64-3/4”
3/64-3/4”
3.50”
6.00”
4.00”
6.00”
3.00”
3.00”
4.00”
4.00”
6.00”
1.15”
1.15”
1.50”
1.50”
1.03”
0.84”
1.50”
1.50”
1.50”
1.06”
1.06”
1.44”
1.44”
0.86”
0.55”
1.44”
1.44”
1.44”
Note: For light or medium milling, we recommend using ER or TG Collet Chucks. DA Collet Chucks are not designed for
milling and can crack at the nose when over-tightened or radial load is applied. DA Collet Chucks are therefore not
warrantied against cracking.
Chucks are equipped with a left-hand-threaded stop screw and a chuck nut.
COLLET CHUCKS
Collet Series
DRILL CHUCKS
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
SHELL MILL HOLDERS
END MILL HOLDERS
CT TAPER DA COLLET CHUCKS
99
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
100
BT TAPER DA COLLET CHUCKS
D
Part Number
Taper
Collet Series
Collet Range
L
L1
D
B3007-0100
B3007-0180
B3007-0200
B3007-0300
B3507-0100
B3507-0180
B3507-0200
B3507-0300
B4007-0100
B4017-0100
B4007-0180
B4017-0180
B4007-0200
B4007-0300
B4507-0180
B5007-0180
B5017-0180
BT30
BT30
BT30
BT30
BT35
BT35
BT35
BT35
BT40
BT40
BT40
BT40
BT40
BT40
BT45
BT50
BT50
100DA
180DA
200DA
300DA
100DA
180DA
200DA
300DA
100DA
100DA
180DA
180DA
200DA
300DA
180DA
180DA
180DA
3/64-9/16”
3/64-3/4”
3/64-3/8”
3/64-1/4”
3/64-9/16”
3/64-3/4”
3/64-3/8”
3/64-1/4”
3/64-9/16”
3/64-9/16”
3/64-3/4”
3/64-3/4”
3/64-3/8”
3/64-1/4”
3/64-3/4”
3/64-3/4”
3/64-3/4”
3.00”
3.00”
3.00”
3.00”
3.00”
4.00”
3.00”
3.00”
3.50”
6.00”
4.00”
6.00”
3.00”
3.00”
4.00”
4.00”
6.00”
1.15”
1.51”
1.03”
1.04”
1.15”
1.51”
1.03”
1.04”
1.15”
1.15”
1.51”
1.51”
1.03”
1.04”
1.51”
1.51”
1.51”
1.06”
1.44”
0.86”
0.55”
1.06”
1.44”
0.86”
0.55”
1.06”
1.06”
1.44”
1.44”
0.86”
0.55”
1.44”
1.44”
1.44”
COLLET CHUCKS
Part Number
Taper
Collet Series
Collet Range
L
L1
D
N3007-0100
N3007-0180
N3007-0200
N3007-0300
N4007-0100
N4007-0180
N4007-0200
N4007-0300
N5007-0180
NMTB30
NMTB30
NMTB30
NMTB30
NMTB40
NMTB40
NMTB40
NMTB40
NMTB50
100DA
180DA
200DA
300DA
100DA
180DA
200DA
300DA
180DA
3/64-9/16”
3/64-3/4”
3/64-3/8”
3/64-1/4”
3/64-9/16”
3/64-3/4”
3/64-3/8”
3/64-1/4”
3/64-3/4”
2.75”
3.00”
2.50”
2.50”
2.75”
3.00”
2.50”
2.50”
3.50”
1.15”
1.51”
1.03”
0.85”
1.15”
1.51”
1.03”
0.85”
1.51”
1.06”
1.44”
0.86”
0.55”
1.06”
1.44”
0.86”
0.55”
1.44”
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
NMTB TAPER DA COLLET CHUCKS
COLLET CHUCKS
• Straight shank tooling may be used to extend tooling reach for extended length operations.
• When loaded into larger holders, their reduced O.D. permits drilling operations within large holes
Part Number
010-EXT-S
010-EXT
018-EXT-S
018-EXT
020-EXT-S
020-EXT
030-EXT-S
030-EXT
Taper
100DA
100DA
180DA
180DA
200DA
200DA
300DA
300DA
Collet Series
3/64-9/16”
3/64-9/16”
3/64-3/4”
3/64-3/4”
3/64-3/8”
3/64-3/8”
3/64-1/4”
3/64-1/4”
Collet Range
1”
1”
1-1/4”
1-1/4”
3/4”
3/4”
1/2”
1/2”
L
4.94”
7.44”
4.90”
7.40”
4.67”
7.17”
4.42”
6.92”
L1
1.66”
1.66”
1.83”
1.83”
1.34”
1.34”
1.18”
1.18”
D
3.00”
5.50”
3.00”
5.50”
3.00”
5.50”
3.00”
5.50”
1.06”
1.06”
1.44”
1.44”
0.86”
0.86”
0.55”
0.55”
STUB, BORING, BLANK
D
TAP HOLDERS
DRILL CHUCKS
DA COLLET CHUCK EXTENSIONS
101
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
DOUBLE ANGLE COLLETS
Double Angle Collets may be successfully employed for most routine applications, except milling.
DA Collets are precision ground for accurate seating within the collet chucks.
Lyndex-Nikken recommends using TG or ER Collet Systems for more precise machining.
Their inherent design characteristics assure excellent toolholding capability and better precision.
300DA COLLETS Size Range: 3/64 - 1/4”
Part Number
Size
Part Number
030-003
030-004
030-005
030-006
030-007
030-008
030-009
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
030-010
030-011
030-012
030-013
030-014
030-015
030-016
STUB, BORING, BLANK
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
300DA COLLETS SETS
Part Number
030-107
030-109
030-113
030-114
Size
7 Piece 300DA Collet Set:
1/16 - 1/4” by 32nds
1/8 - 1/4” by 64ths
1/16 - 1/4” by 64ths
3/64 - 1/4” by 64ths
Part Number
020-003
020-004
020-005
020-006
020-007
020-008
020-009
020-010
020-011
020-012
020-013
Size
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
Part Number
020-014
020-015
020-016
020-017
020-018
020-019
020-020
020-021
020-022
020-023
020-024
Size
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
200DA COLLETS SETS
Part Number
102
Size
020-109
020-111
020-117
020-121
Size
1/8 - 3/8” by 32nds
1/16 - 3/8” by 32nds
1/8 - 3/8” by 64ths
1/16 - 3/8” by 64ths
COLLET CHUCKS
Part Number
010-003
010-004
010-005
010-006
010-007
010-008
010-009
010-010
010-011
010-012
010-013
010-014
010-015
010-016
010-017
010-018
010-019
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
010-020
010-021
010-022
010-023
010-024
010-025
010-026
010-027
010-028
010-029
010-030
010-031
010-032
010-033
010-034
010-035
010-036
Size
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
100DA COLLETS SETS
COLLET CHUCKS
1/8 - 9/16” by 16ths
1/4 - 9/16” by 32nds
1/8 - 9/16” by 32nds
1/16 - 9/16” by 32nds
1/4 - 9/16” by 64ths
1/8 - 9/16” by 64ths
1/16 - 9/16” by 64ths
DRILL CHUCKS
29 Piece 100DA collet Set:
TAP HOLDERS
010-108
010-111
010-115
010-117
010-121
010-129
010-133
Size
STUB, BORING, BLANK
Part Number
See dimensional data for DA Collets
on page 108
END MILL HOLDERS
Size
SHELL MILL HOLDERS
Part Number
MILLING CHUCKS
103
COLLET CHUCKS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
104
See dimensional data for DA Collets
on page 108
Part Number
Size
Part Number
Size
018-003
018-004
018-005
018-006
018-007
018-008
018-009
018-010
018-011
018-012
018-013
018-014
018-015
018-016
018-017
018-018
018-019
018-020
018-021
018-022
018-023
018-024
018-025
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
018-026
018-027
018-028
018-029
018-030
018-031
018-032
018-033
018-034
018-035
018-036
018-037
018-038
018-039
018-040
018-041
018-042
018-043
018-044
018-045
018-046
018-047
018-048
13/32”
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
180DA COLLETS SETS
Part Number
018-109
018-117
018-121
018-133
018-141
Size
1/4 - 3/4” by 16ths
1/4 - 3/4” by 32nds
1/8 - 3/4” by 32nds
1/4 - 3/4” by 64ths
1/8 - 3/4” by 64ths
These form-fitted racks are made from specially treated premium hardwood.
DELUXE DA COLLETS SETS
100-KITRACK,
180-KITRACK,
200-KITRACK,
300-KITRACK,
010-EXT,
018-EXT,
020-EXT,
030-EXT,
010-133
018-141
020-121
030-114
DA COLLETS RACKS
Part Number
Collet
Collet
Collet
Collet
Rack,
Rack,
Rack,
Rack,
21
36
21
21
Collet
Collet
Collet
Collet
Capacity
Capacity
Capacity
Capacity
COLLET CHUCKS
100DA
180DA
200DA
300DA
DA KIT RACKS
100-KITRACK
180-KITRACK
200-KITRACK
300-KITRACK
Description
Holds
Holds
Holds
Holds
1
1
1
1
100DA
180DA
200DA
300DA
Extension
Extension
Extension
Extension
and
and
and
and
34
41
24
24
Collets
Collets
Collets
Collets
DRILL CHUCKS
Part Number
TAP HOLDERS
100DA-RACK
180DA-RACK
200DA-RACK
300DA-RACK
Description
END MILL HOLDERS
Includes
Includes
Includes
Includes
STUB, BORING, BLANK
100-KIT
180-KIT
200-KIT
300-KIT
Description
SHELL MILL HOLDERS
Part Number
MILLING CHUCKS
COLLET CHUCKS
105
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
106
REPLACEMENT DA CHUCK NUT PARTS
Part Number
100DA-1
100DA-2
100DA-NUT
180DA-1
180DA-2
180DA-NUT
200DA-1
200DA-2
200DA-NUT
300DA-1
300DA-2
300DA-NUT
Description
100DA
100DA
100DA
180DA
180DA
180DA
200DA
200DA
200DA
300DA
300DA
300DA
Nut Spacer
Nut Retaining Ring
Nut, Complete Replacement
Nut Spacer
Nut Retaining Ring
Nut Spacer
Nut Retaining Ring
Nut Spacer
Nut Retaining Ring
REPLACEMENT DA BACKUP SCREWS
Part Number
100DA-3
100DA-4
180DA-3
180DA-4
200DA-3
200DA-4
200DA-5
300DA-3
300DA-4
Description
All CT, BT, NMTB 100DA Chucks
100 DA Chuck Extensions
All CT, BT, NMTB 180DA Chucks
All 40-taper 200DA Chucks
BT30 & BT35 200DA Chucks
All CT, BT, NMTB, 300DA Chucks
COLLET CHUCKS
Style
ER8
ER11
ER16
ER20
ER25
ER32
ER40
ER50
D
8.40mm
11.7mm
17.2mm
21.2mm
26.2mm
33.2mm
41.2mm
52.5mm
D1
L
Collet Range
Coolant Collet Size Range
5.5mm
7.8mm
11.3mm
14.5mm
18.5mm
24.4mm
31.2mm
39.1mm
13.6mm
18.0mm
27.0mm
31.0mm
35.0mm
40.0mm
46.0mm
60.0mm
0.5-5.0mm
0.5-7.0mm
0.5-10.0mm
1.0-13.0mm
1.0-16.0mm
2.0-20.0mm
3.0-26.0mm
11.0-34.0mm
L
Collet Range
Coolant Collet Size Range
3/64-1/4"
1/8-1/2"
3/64-3/4"
3/64-1"
1/2-1-1/2"
N/A
N/A
1/8-3/4”
1/4-1”
N/A
N/A
4.0-7.0mm (3/16”-17/64”)
4.0-10.0mm (3/32”-13/32”)
5.0-13.0mm (5/32”-1/2”)
6.0-16.0mm (7/32”-5/8”)
10.0-20.0mm (1/4”-25/32”)
10.0-26.0mm
N/A
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
ER COLLET DIMENSIONAL DATA
25TG
50TG
75TG
100TG
150TG
D
0.425"
0.760"
1.063"
1.278"
1.875"
D1
0.325"
0.594"
0.871"
1.121"
1.678"
0.709"
1.437"
1.844"
2.386"
3.000"
TAP HOLDERS
Style
STUB, BORING, BLANK
D
DRILL CHUCKS
COLLET CHUCKS
TG COLLET DIMENSIONAL DATA
107
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
COLLET CHUCKS
108
DA COLLET DIMENSIONAL DATA
D
Style
300DA
200DA
100DA
180DA
D
0.375"
0.539"
0.769"
1.035"
D1
0.300"
0.453"
0.653"
0.873"
L
1.000"
1.193"
1.441"
1.637"
Collet Range
3/64-1/4"
3/64-3/8"
3/64-9/16"
3/64-3/4"
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
DRILL CHUCKS
109
CT TAPER INTEGRAL KEYLESS DRILL CHUCKS
D
L1
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
D
MILLING CHUCKS
DRILL CHUCKS
L
Part Number
CAT40-NPU8-80U
CAT40-NPU8-110U
CAT40-NPU13-105U
CAT40-NPU13-130U
CAT50-NPU8-80U
CAT50-NPU13-90U
Taper
Capacity
L
L1
D
CT40
CT40
CT40
CT40
CT50
CT50
5/16" (8.0mm)
5/16" (8.0mm)
1/2" (13.0mm)
1/2" (13.0mm)
5/16" (8.0mm)
1/2" (13.0mm)
3.40"
4.54"
4.37"
5.40"
3.25"
3.82"
3.68"
4.82"
4.80"
5.83"
3.52"
4.26"
1.36"
1.36"
1.81"
1.81"
1.36"
1.81"
BT TAPER INTEGRAL KEYLESS DRILL CHUCKS
Part Number
BT30-NPU8-70
BT30-NPU13-95
BT40-NPU8-70
BT40-NPU13-80
BT50-NPU13-90
Taper
Capacity
L
L1
D
BT30
BT30
BT40
BT40
BT50
5/16" (8.0mm)
1/2" (13.0mm)
5/16" (8.0mm)
1/2" (13.0mm)
1/2" (13.0mm)
3.01"
4.02"
3.01"
3.39"
3.82"
3.29"
4.45"
3.29"
3.82"
4.26"
1.36"
1.81"
1.36"
1.81"
1.81"
NMTB TAPER INTEGRAL KEYLESS DRILL CHUCKS
DRILL CHUCKS
Part Number
NMTB40-NPU8-76
NMTB40-NPU13-86
NMTB50-NPU13-86
Taper
Capacity
L
L1
D
NMTB40
NMTB40
NMTB50
5/16" (8.0mm)
1/2" (13.0mm)
1/2" (13.0mm)
3.25"
3.62"
3.62"
3.52"
4.06"
4.06"
1.36"
1.81"
1.81"
Capacity
L
L1
D
1/2" (13.0mm)
1/2" (13.0mm)
5.59"
5.98"
6.03"
6.42"
1.81"
1.81"
STUB, BORING, BLANK
TAP HOLDERS
HSK TAPER INTEGRAL KEYLESS DRILL CHUCKS
110
D
Part Number
HSK63A-NPU13C-135
HSK100A-NPU13C-145
Taper
HSK63A
HSK100A
DRILL CHUCKS
MILLING CHUCKS
STRAIGHT SHANK INTEGRAL KEYLESS DRILL CHUCKS
D
Part Number
Capacity
D1
L
L1
D
D3/4-NPU8
D1.1/4-NPU13
D1.1/2-NPU13
5/16" (8.0mm)
1/2" (13.0mm)
1/2" (13.0mm)
3/4”
1.1/4"
1.1/2"
2.58"
3.32"
3.32"
2.85"
3.80"
3.80"
1.36"
1.81"
1.81"
REPLACEMENT DRILL CHUCK WRENCHES
Part Number
Description
Fits 5/16” (8.0mm) chucks
NPU13-SPAN
Fits 1/2” (13.0mm) chucks
COLLET CHUCKS
NPU8-SPAN
END MILL HOLDERS
L
SHELL MILL HOLDERS
D
D1
L1
REPLACEMENT DRILL CHUCKS
REPLACEMENT DRILL CHUCK PARTS
Part Number
SP-08062
NPU-0805
SP-13062
NPU-1305
NPU-13051
Description
Jaw Set for 1/4" Chuck
Lead Screw for 1/4" Chuck
Jaw Set for 1/2" Chuck
Lead Screw for 1/2" Chuck P=3mm
Lead Screw for 1/2" Chuck P=2.25mm
DRILL CHUCKS
Replacement 1/4" Chuck
Replacement 1/2" Chuck
TAP HOLDERS
9NPU-8
9NPU-13
Description
STUB, BORING, BLANK
Part Number
111
DRILL CHUCKS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
112
D
END MILL HOLDERS
MILLING CHUCKS
CT TAPER JACOBS TAPER HOLDERS
Part Number
Taper
JT Size
L
D
C4003-0002
C4003-0003
C4003-0004
C4003-0006
C4003-0033
C4503-0002
C4503-0003
C4503-0006
C4503-0033
C5003-0002
C5003-0003
C5003-0004
C5003-0006
C5003-0033
CT40
CT40
CT40
CT40
CT40
CT45
CT45
CT45
CT45
CT50
CT50
CT50
CT50
CT50
JT#2
JT#3
JT#4
JT#6
JT#33
JT#2
JT#3
JT#6
JT#33
JT#2
JT#3
JT#4
JT#6
JT#33
1.61”
1.58”
1.49”
1.61”
1.61”
1.61”
1.58”
1.61”
1.61”
1.61”
1.58”
1.49”
1.61”
1.61”
.560”
.812”
1.13”
.677”
.625”
.560”
.812”
.677”
.625”
.560”
.812”
1.13”
.677”
.625”
L
BT TAPER JACOBS TAPER HOLDERS
Part Number
Taper
JT Size
L
D
B3003-0001
B3003-0002
B3003-0003
B3003-0006
B3003-0033
B3503-0001
B3503-0002
B3503-0003
B3503-0006
B3503-0033
B4003-0002
B4003-0003
B4003-0006
B4003-0033
B4503-0002
B4503-0003
B4503-0006
B4503-0033
B5003-0002
B5003-0003
B5003-0004
B5003-0006
B5003-0033
BT30
BT30
BT30
BT30
BT30
BT35
BT35
BT35
BT35
BT35
BT40
BT40
BT40
BT40
BT45
BT45
BT45
BT45
BT50
BT50
BT50
BT50
BT50
JT#1
JT#2
JT#3
JT#6
JT#33
JT#1
JT#2
JT#3
JT#6
JT#33
JT#2
JT#3
JT#6
JT#33
JT#2
JT#3
JT#6
JT#33
JT#2
JT#3
JT#4
JT#6
JT#33
1.06”
1.02”
0.98”
1.02”
1.02”
1.06”
1.02”
0.98”
1.02”
1.02”
1.61”
1.57”
1.61”
1.61”
1.59”
1.55”
1.59”
1.59”
1.61”
1.57”
1.49”
1.61”
1.61”
.385”
.560”
.812”
.677”
.625”
.385”
.560”
.812”
.677”
.625”
.560”
.812”
.677”
.625”
.560”
.812”
.677”
.625”
.560”
.812”
1.13”
.677”
.625”
DRILL CHUCKS
.385”
.560”
.812”
.677”
.625”
.385”
.560”
.812”
.677”
.625”
.560”
.812”
1.13”
.677”
.625”
L
D
0.13”
0.13”
0.13”
0.13”
0.13”
.385”
.560”
.812”
.677”
.625”
END MILL HOLDERS
0.63”
0.59”
0.55”
0.59”
0.59”
0.69”
0.65”
0.61”
0.65”
0.65”
1.34”
1.30”
1.22”
1.34”
1.34”
L
870-001
870-002
870-003
870-006
870-033
Taper
R8
R8
R8
R8
R8
JT Size
JT#1
JT#2
JT#3
JT#6
JT#33
D
Part Number
COLLET CHUCKS
R8 JACOBS TAPER HOLDERS
SHELL MILL HOLDERS
D
L
DRILL CHUCKS
JT#1
JT#2
JT#3
JT#6
JT#33
JT#1
JT#2
JT#3
JT#6
JT#33
JT#2
JT#3
JT#4
JT#6
JT#33
L
TAP HOLDERS
NMTB30
NMTB30
NMTB30
NMTB30
NMTB30
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
JT Size
STUB, BORING, BLANK
N3003-0001
N3003-0002
N3003-0003
N3003-0006
N3003-0033
N4003-0001
N4003-0002
N4003-0003
N4003-0006
N4003-0033
N5003-0002
N5003-0003
N5003-0004
N5003-0006
N5003-0033
Taper
D
Part Number
MILLING CHUCKS
NMTB TAPER JACOBS TAPER HOLDERS
113
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
DRILL CHUCKS
114
JACOBS® BRAND DRILL CHUCKS
Part Number
8-1/2N
100-J2
100-J33
11N
130-J2
130-J33
130-J6
130-JT2
130-JT33
130-JT6
14N
160-J6
160-JT6
16N
18N
34-02
34-06
34-33
Range
0 - 1/4”
0 - 3/8”
0 - 3/8”
0 - 3/8”
1/32 - 1/2”
1/32 - 1/2”
1/32 - 1/2”
1/32 - 1/2”
1/32 - 1/2”
1/32 - 1/2”
0 - 1/2”
1/8 - 5/8”
1/8 - 5/8”
1/8 - 5/8”
1/8 - 3/4”
0 - 1/2”
0 - 1/2”
0 - 1/2”
Fits Taper
JT#2
JT#2
JT#33
JT#2
JT#2
JT#33
JT#6
JT#2
JT#33
JT#6
JT#3
JT#6
JT#6
JT#3
JT#4
JT#2
JT#6
JT#33
Description
Heavy Duty Ball Bearing Chuck
Hi Precision Keyless Chuck
Hi Precision Hi Torque Keyless Chuck
Heavy Duty Plain Bearing Chuck
MT#1
MT#2
MT#3
MT#4
MT#2
MT#3
MT#4
MT#5
MT#2
MT#3
MT#4
MT#5
1.75”
2.36”
3.00”
3.54”
2.36”
3.00”
3.54”
4.76”
1.75”
1.75”
3.00”
4.13”
D1
.475”
.700”
.938”
1.23”
.700”
.938”
1.23”
1.75”
.700”
.938”
1.23”
1.75”
1.00”
1.25”
1.57”
1.97”
1.25”
1.57”
1.97”
2.75”
1.25”
1.57”
1.97”
2.75”
D
D1
.475”
.700”
.475”
.700”
.938”
1.23”
.475”
.700”
.938”
1.23”
.700”
.938”
1.23”
1.75”
.700”
.938”
1.23”
1.75”
1.00”
1.25”
1.00”
1.25”
1.57”
1.97”
1.00”
1.25”
1.57”
1.97”
1.25”
1.57”
1.97”
2.75”
1.25”
1.57”
1.97”
2.75”
BT MORSE TAPER HOLDERS
Part Number
B3004-0001
B3004-0002
B3504-0001
B3504-0002
B3504-0003
B3504-0004
B4004-0001
B4004-0002
B4004-0003
B4004-0004
B4504-0002
B4504-0003
B4504-0004
B4504-0005
B5004-0002
B5004-0003
B5004-0004
B5004-0005
Taper
Size
BT30
BT30
BT35
BT35
BT35
BT35
BT40
BT40
BT40
BT40
BT45
BT45
BT45
BT45
BT50
BT50
BT50
BT50
MT#1
MT#2
MT#1
MT#2
MT#3
MT#4
MT#1
MT#2
MT#3
MT#4
MT#2
MT#3
MT#4
MT#5
MT#2
MT#3
MT#4
MT#5
L
1.75”
2.36”
1.75”
2.36”
3.00”
4.37”
1.75”
2.36”
3.00”
3.54”
2.36”
3.00”
3.54”
4.76”
1.75”
1.75”
3.00”
4.13”
END MILL HOLDERS
CT40
CT40
CT40
CT40
CT45
CT45
CT45
CT45
CT50
CT50
CT50
CT50
D
SHELL MILL HOLDERS
C4004-0001
C4004-0002
C4004-0003
C4004-0004
C4504-0002
C4504-0003
C4504-0004
C4504-0005
C5004-0002
C5004-0003
C5004-0004
C5004-0005
L
COLLET CHUCKS
Size
DRILL CHUCKS
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
CT MORSE TAPER HOLDERS
MILLING CHUCKS
DRILL CHUCKS
115
NMTB MORSE TAPER HOLDERS
Part Number
N3004-0001
N3004-0002
N3004-0003
N4004-0001
N4004-0002
N4004-0003
N4004-0004
N5004-0002
N5004-0003
N5004-0004
N5004-0005
COLLET CHUCKS
Size
NMTB30
NMTB30
NMTB30
NMTB40
NMTB40
NMTB40
NMTB40
NMTB50
NMTB50
NMTB50
NMTB50
MT#1
MT#2
MT#3
MT#1
MT#2
MT#3
MT#4
MT#2
MT#3
MT#4
MT#5
L
1.00”
2.13”
2.81”
0.94”
1.75”
2.25”
3.00”
1.88”
2.38”
3.25”
4.63”
D
D1
0.48”
0.70”
0.94”
0.48”
0.70”
0.94”
1.23”
0.70”
0.94”
1.23”
1.75”
1.00”
1.25”
1.57”
1.00”
1.25”
1.57”
1.97”
1.25”
1.57”
1.97”
2.75”
D
D1
0.48”
0.70”
0.94”
1.00”
1.25”
1.57”
R8 MORSE TAPER HOLDERS
Part Number
DRILL CHUCKS
Taper
840-001
840-002
840-003
Taper
Size
R8
R8
R8
MT#1
MT#2
MT#3
L
0.44”
0.44”
2.56”
D1
D
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
DRILL CHUCKS
STUB, BORING, BLANK
TAP HOLDERS
L
116
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
117
CT TAPER TENSION/COMPRESSION TAP HOLDERS
D
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
Part Number
Taper
C40S5-0562
C4005-0562
C40S5-0875
C4005-0875
C40S5-1375
C4005-1375
C4505-0562
C4505-0875
C4505-1375
C50S5-0562
C5005-0562
C50S5-0875
C5005-0875
C50S5-1375
C5005-1375
CT40
CT40
CT40
CT40
CT40
CT40
CT45
CT45
CT45
CT50
CT50
CT50
CT50
CT50
CT50
Tap Range
Hand
Pipe
#0-9/16”
#0-9/16”
5/16-7/8”
5/16-7/8”
13/16-1-3/8”
13/16-1-3/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
#0-9/16”
#0-9/16”
5/16-7/8”
5/16-7/8”
13/16-1-3/8”
13/16-1-3/8”
1/8”
1/8”
1/4-1/2”
1/4-1/2”
1/2-1”
1/2-1”
1/8”
1/4-1/2”
1/2-1”
1/8”
1/8”
1/4-1/2”
1/4-1/2”
1/2-1”
1/2-1”
System
#1
#1
#2
#2
#3
#3
#1
#2
#3
#1
#1
#2
#2
#3
#3
L
2.93”
4.47”
3.90”
6.66”
5.75”
9.19”
4.47”
5.66”
9.19”
2.93”
5.02”
3.90”
5.66”
5.75”
7.72”
D
T
C
1.43”
1.25”
2.09”
2.00”
3.07”
2.87”
1.25”
2.00”
2.87”
1.43”
1.25”
2.09”
2.00”
3.07”
2.87”
0.29”
0.79”
0.49”
0.85”
0.79”
0.98”
0.79”
0.85”
0.98”
0.29”
0.79”
0.49”
0.85”
0.79”
0.98”
0.29”
0.39”
0.49”
0.49”
0.79”
0.59”
0.39”
0.49”
0.59”
0.29”
0.39”
0.49”
0.49”
0.79”
0.59”
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
CT TAPER RIGID TAP HOLDERS
118
D
Part Number
Taper
C40R5-0562
C40R5-0875
C40R5-1375
C50R5-0562
C50R5-0875
C50R5-1375
CT40
CT40
CT40
CT50
CT50
CT50
Tap Range
Hand
#0-9/16”
5/16-7/8”
13/16-1-3/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
Note: Tap Collets are listed on pages 128-140.
Pipe
1/8”
1/4-1/2”
1/2-1”
1/8”
1/4-1/2”
1/2-1”
System
#1
#2
#3
#1
#2
#3
L
3.02”
3.66”
4.72”
3.02”
3.91”
4.98”
D
1.25”
2.00”
2.87”
1.25”
2.00”
2.87”
These holders are
designed for use
with synchronized
machining centers. The
holders have no tension
or compression.
TAP HOLDERS
D
MILLING CHUCKS
BT TAPER TENSION/COMPRESSION TAP HOLDERS
#0-9/16”
#0-9/16”
#0-9/16”
#0-9/16”
5/16-7/8”
#0-9/16”
#0-9/16”
5/16-7/8”
5/16-7/8”
13/16-1-3/8”
13/16-1-3/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
#0-9/16”
#0-9/16”
5/16-7/8”
5/16-7/8”
13/16-1-3/8”
13/16-1-3/8”
1/8”
1/8”
1/8”
1/8”
1/4-1/2”
1/8”
1/8”
1/4-1/2”
1/4-1/2”
1/2-1”
1/2-1”
1/8”
1/4-1/2”
1/2-1”
1/8”
1/8”
1/4-1/2”
1/4-1/2”
1/2-1”
1/2-1”
System
#1
#1
#1
#1
#2
#1
#1
#2
#2
#3
#3
#1
#2
#3
#1
#1
#2
#2
#3
#3
L
2.40”
4.92”
2.48”
4.33”
6.91”
2.62”
4.33”
3.68”
6.34”
6.40”
9.00”
4.92”
5.94”
9.19”
3.05”
4.92”
4.00”
5.55”
5.55”
7.68”
D
T
C
1.43”
1.25”
1.43”
1.25”
2.00”
1.43”
1.25”
2.09”
2.00”
3.07”
2.87”
1.25”
2.00”
2.87”
1.43”
1.25”
2.09”
2.00”
3.07”
2.87”
0.29”
0.79”
0.29”
0.79”
0.85”
0.29”
0.79”
0.49”
0.85”
0.79”
0.98”
0.79”
0.85”
0.98”
0.29”
0.79”
0.49”
0.85”
0.79”
0.98”
0.29”
0.39”
0.29”
0.39”
0.49”
0.29”
0.39”
0.49”
0.49”
0.79”
0.59”
0.39”
0.49”
0.59”
0.29”
0.39”
0.49”
0.49”
0.79”
0.59”
SHELL MILL HOLDERS
BT30
BT30
BT35
BT35
BT35
BT40
BT40
BT40
BT40
BT40
BT40
BT45
BT45
BT45
BT50
BT50
BT50
BT50
BT50
BT50
Pipe
COLLET CHUCKS
B30S5-0562
B3005-0562
B35S5-0562
B3505-0562
B3505-0875
B40S5-0562
B4005-0562
B40S5-0875
B4005-0875
B40S5-1375
B4005-1375
B4505-0562
B4505-0875
B4505-1375
B50S5-0562
B5005-0562
B50S5-0875
B5005-0875
B50S5-1375
B5005-1375
Tap Range
Hand
DRILL CHUCKS
Taper
TAP HOLDERS
Part Number
STUB, BORING, BLANK
TC
END MILL HOLDERS
D
L
119
BT TAPER RIGID TAP HOLDERS
D
Part Number
Taper
B30R5-0562
B35R5-0562
B35R5-0875
B40R5-0562
B40R5-0875
B40R5-1375
B50R5-0562
B50R5-0875
B50R5-1375
BT30
BT35
BT35
BT40
BT40
BT40
BT50
BT50
BT50
Tap Range
Hand
TAP HOLDERS
STUB, BORING, BLANK
1/8”
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/2-1”
1/8”
1/4-1/2”
1/2-1”
System
#1
#1
#2
#1
#2
#3
#1
#2
#3
L
2.44”
3.02”
3.66”
3.02”
3.66”
4.73”
3.02”
4.16”
5.23”
D
1.25”
1.25”
2.00”
1.25”
2.00”
2.87”
1.25”
2.00”
2.87”
These holders are
designed for use
with synchronized
or compression.
NMTB TAPER TENSION/COMPRESSION TAP HOLDERS
D
Part Number
120
Pipe
#0-9/16”
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
N3005-0562
N3005-0875
N4005-0562
N4005-0875
N5005-0562
N5005-0875
N5005-1375
Taper
NMTB30
NMTB30
NMTB40
NMTB40
NMTB50
NMTB50
NMTB50
Tap Range
Hand
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
Pipe
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/2-1”
System
#1
#2
#1
#2
#1
#2
#3
L
4.64”
6.16”
3.90”
6.16”
4.50”
7.00”
7.73”
Tap Collets are listed on pages 128-140.
D
T
C
1.25”
2.00”
1.25”
2.00”
1.25”
2.00”
2.87”
0.79”
0.85”
0.79”
0.85”
0.79”
0.85”
0.98”
0.39”
0.49”
0.39”
0.49”
0.39”
0.49”
0.59”
TAP HOLDERS
Part Number
HSK63A-TC0562
HSK63A-TC0875
HSK63A-TC1375
Taper
HSK63A
HSK63A
HSK63A
Tap Range
Hand
Pipe
#0-9/16”
5/16-7/8”
13/16-1-3/8”
1/8”
1/4-1/2”
1/2-1”
System
#1
#2
#3
L
4.49"
5.827"
7.72"
D
T
C
1.43"
2.09"
3.07”
0.29"
0.49"
.79”
0.29"
0.49"
.79”
D
T
C
1.43”
2.09”
3.07”
.29”
.49”
.79”
.29”
.49”
.79”
HSK100A TAPER TENSION/COMPRESSION TAP HOLDERS
HSK100A
HSK100A
HSK100A
Tap Range
Hand
#0-9/16”
5/16-7/8”
13/16-1-3/8”
Pipe
1/8”
1/4-1/2”
1/2-1”
System
#1
#2
#3
L
4.65"
5.98"
7.95"
TAP HOLDERS
HSK100A-TC0562
HSK100A-TC0875
HSK100A-TC1375
Taper
STUB, BORING, BLANK
Part Number
DRILL CHUCKS
COLLET CHUCKS
D
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
HSK63A TAPER TENSION/COMPRESSION TAP HOLDERS
121
HSK40A / HSK63A TAPER RIGID TAP HOLDERS
D
Part Number
HSK40A-R0562
HSK63A-R0562
HSK63A-R0875
HSK63A-R1375
Taper
HSK40A
HSK63A
HSK63A
HSK63A
Tap Range
Hand
Pipe
#0-9/16”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
1/8”
1/8”
1/4-1/2”
1/2-1”
System
#1
#1
#2
#3
L
3.15”
2.48"
3.31”
5.12”
D
1.26"
1.26”
1.97”
2.83”
These holders are designed
for use with synchronized
holders have no tension or
compression.
HSK100A TAPER RIGID TAP HOLDERS
D
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
122
Part Number
HSK100A-R0562
HSK100A-R0875
HSK100A-R1375
Taper
HSK100A
HSK100A
HSK100A
Tap Range
Hand
#0-9/16”
5/16-7/8”
13/16-1-3/8”
Pipe
1/8”
1/4-1/2”
1/2-1”
System
#1
#2
#3
L
2.59"
3.42”
4.57”
D
1.26”
1.97”
2.83”
These holders are designed
for use with synchronized
holders have no tension or
compression.
Straight shank tooling may be used to extend tooling reach for extended length operations.
• When loaded into larger holders, their reduced O.D. permits tapping applications within large holes
MILLING CHUCKS
TAP HOLDERS
L1
D
D1
TC
Pipe
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
1/8”
1/4-1/2”
1/8”
1/4-1/2”
System
D
D1
#1
#2
#1
#2
1’’
1”
1-1/4”
1-1/4”
1.25”
2.00”
1.25”
2.00”
L1
3.50”
3.50”
4.00”
4.00”
L2
T
C
4.13”
5.55”
4.13”
5.55”
0.79”
0.85”
0.79”
0.85”
0.39”
0.49”
0.39”
0.49”
COLLET CHUCKS
S1005-0562
S1005-0875
S1205-0562
S1205-0875
Tap Range
Hand
WELDON SHANK TENSION/COMPRESSION TAP HOLDERS
D
L2
DRILL CHUCKS
D
D1
L1
T C
Part Number
W7505-0562
W1005-0562
W10S5-0562
W1005-0875
W10S5-0875
W1205-0562
W1205-0875
W1505-0562
W1505-0875
W1505-1375
W15S5-1375
W25M5-0562
W25M5-0875
Tap Range
Hand
#0-9/16”
#0-9/16”
#0-9/16”
5/16-7/8”
5/16-7/8”
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
13/16-1-3/8”
#0-9/16”
5/16-7/8”
Pipe
1/8”
1/8”
1/8”
1/4-1/2”
1/4-1/2”
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/2-1”
1/2-1”
1/8”
1/4-1/2”
System
D
D1
L1
L2
T
C
#1
#1
#1
#2
#2
#1
#2
#1
#2
#3
#3
#1
#2
3/4”
1”
1”
1”
1”
1-1/4”
1-1/4”
1-1/2”
1-1/2”
1-1/2”
1-1/2”
25mm
25mm
1.25”
1.25”
1.43”
2.00”
2.09”
1.25”
2.00”
1.25”
2.00”
2.87”
3.07”
36mm
53mm
2.03”
2.28”
2.28”
2.28”
2.28”
2.28”
2.28”
2.69”
2.69”
2.69”
2.69”
57mm
57mm
4.33”
4.13”
1.53”
5.55”
2.48”
4.13”
5.55”
4.13”
5.55”
7.81”
3.86”
39mm
63mm
0.79”
0.79”
0.29”
0.85”
0.49”
0.79”
0.85”
0.79”
0.85”
0.98”
0.79”
7.5mm
12.5mm
0.39”
0.39”
0.29”
0.49”
0.49”
0.39”
0.49”
0.39”
0.49”
0.59”
0.79”
7.5mm
12.5mm
TAP HOLDERS
Part Number
STUB, BORING, BLANK
L2
SHELL MILL HOLDERS
D
END MILL HOLDERS
STRAIGHT SHANK TENSION/COMPRESSION TAP HOLDERS
123
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
WELDON SHANK RIGID TAP HOLDERS
D
Part Number
W10R5-0562
W10R5-0875
W15R5-1375
W25MR5-0562
W25MR5-0875
Tap Range
Hand
Pipe
#0-9/16”
5/16-7/8”
13/16-1-3/8”
#0-9/16”
5/16-7/8”
1/8”
1/4-1/2”
1/2-1”
1/8”
1/4-1/2”
System
D
D1
#1
#2
#3
#1
#2
1”
1”
1-1/2”
25mm
25mm
L1
1.26”
1.97”
2.83”
32mm
50mm
2.28”
2.28”
2.69”
57mm
57mm
L2
1.46”
2.12”
3.27”
37mm
56mm
MORSE TAPER TENSION/COMPRESSION TAP HOLDERS
D
D
COLLET CHUCKS
L
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
TC
124
Part Number
M0205-0562
M0205-0875
M0305-0562
M0305-0875
M0405-0562
M0405-0875
Tap Range
Hand
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
Pipe
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/8”
1/4-1/2”
System
D
D1
L1
L2
#1
#2
#1
#2
#1
#2
1.25”
2.00”
1.25”
2.00”
1.25”
2.00”
4.92”
5.94”
4.72”
5.94”
4.72”
5.94”
0.79”
0.85”
0.79”
0.85”
0.79”
0.85”
0.39”
0.49”
0.39”
0.49”
0.39”
0.49”
COOLANT-THRU TAP HOLDERS
Coolant-thru tap holders facilitate chip removal, which reduces chip welding to the tap and gouging
the wall of the workpiece. By delivering coolant to the cutting edge, at up to 750 PSI and flushing out
chips, they’re ideal for use in deep or blind-hole tapping operations.
CT TAPER TENSION/COMPRESSION COOLANT-THRU TAP HOLDERS
END MILL HOLDERS
D
MILLING CHUCKS
TAP HOLDERS
Taper
C4005-0562(C)
C4005-0875(C)
C5005-0562(C)
C5005-0875(C)
C5005-1375(C)
CT40
CT40
CT50
CT50
CT50
Tap Range
Hand
Pipe
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/2-1”
System
L
D
D1
T
C
#1
#2
#1
#2
#3
3.98”
5.39”
3.98”
5.39”
8.31”
1.57”
2.20”
1.57”
2.20”
2.95”
1.28”
1.99”
1.28”
1.99”
2.95”
0.27”
0.39”
0.27”
0.39”
0.71”
0.12”
0.20”
0.12”
0.20”
0.51”
COLLET CHUCKS
Part Number
SHELL MILL HOLDERS
CENTRAL COOLANT FLOW
CT TAPER RIGID COOLANT-THRU TAP HOLDERS
L
C40R5-0562(C)
C40R5-0875(C)
C50R5-0562(C)
C50R5-0875(C)
C50R5-1375(C)
CT40
CT40
CT50
CT50
CT50
Tap Range
Hand
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
Pipe
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/2-1”
System
#1
#2
#1
#2
#3
L
2.87”
3.50”
2.87”
3.50”
5.00”
D
1.26”
1.97”
1.26”
1.97”
2.83”
These holders are
designed for use
with synchronized
or compression.
TAP HOLDERS
Taper
STUB, BORING, BLANK
Part Number
DRILL CHUCKS
D
D
125
BT TAPER TENSION/COMPRESSION COOLANT-THRU TAP HOLDERS
D
L
SHELL MILL HOLDERS
END MILL HOLDERS
D
D1
MILLING CHUCKS
TAP HOLDERS
TC
Part Number
Taper
B4005-0562(C)
B4005-0875(C)
B5005-0562(C)
B5005-0875(C)
B5005-1375(C)
BT40
BT40
BT50
BT50
BT50
Tap Range
Hand
Pipe
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/2-1”
System
L
D
D1
T
C
#1
#2
#1
#2
#3
3.98”
5.39”
4.33”
5.75”
8.31”
1.57”
2.20”
1.57”
2.20”
2.95”
1.28”
1.99”
1.28”
1.99”
2.91”
0.27”
0.39”
0.27”
0.39”
0.71”
0.12”
0.20”
0.12”
0.20”
0.51”
Note: Maximum allowable coolant pressure of 750 PSI.
D
L
TAP HOLDERS
DRILL CHUCKS
D
COLLET CHUCKS
BT TAPER RIGID COOLANT-THRU TAP HOLDERS
Part Number
Taper
B40R5-0562(C)
B40R5-0875(C)
B50R5-0562(C)
B50R5-0875(C)
B50R5-1375(C)
BT40
BT40
BT50
BT50
BT50
Tap Range
Hand
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
STUB, BORING, BLANK
126
Pipe
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/2-1”
System
#1
#2
#1
#2
#3
L
2.87”
3.50”
3.23”
3.86”
5.00”
D
1.26”
1.97”
1.26”
1.97”
2.83”
These holders are
designed for use
with synchronized
or compression.
TAP HOLDERS
W1005-0562(C)
W1005-0875(C)
W1205-0562(C)
W1205-0875(C)
W1505-1375(C)
W25M5-0562(C)
W25M5-0875(C)
Tap Range
Hand
Pipe
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
#0-9/16”
5/16-7/8”
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/2-1”
1/8”
1/4-1/2”
System
D
D1
L1
L2
T
C
D2
#1
#2
#1
#2
#3
#1
#2
1”
1”
1-1/4”
1-1/4”
1-1/2”
25mm
25mm
1.29”
1.99”
1.28”
1.99”
2.95”
32mm
50mm
2.28”
2.28”
2.28”
2.28”
2.69”
53mm
53mm
2.60”
4.02”
2.60”
4.02”
6.57”
66mm
102mm
0.27”
0.39”
0.27”
0.39”
0.71”
7mm
10mm
0.12”
0.20”
0.12”
0.20”
0.51”
3mm
5mm
1.57”
2.20”
1.57”
2.20”
2.95”
40mm
56mm
T
C
D2
COLLET CHUCKS
Part Number
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
WELDON SHANK TENSION/COMPRESSION COOLANT-THRU TAP HOLDERS
WELDON SHANK RIGID COOLANT-THRU TAP HOLDERS
W75R5-0562(C)
W10R5-0562(C)
W10R5-0875(C)
W12R5-0562(C)
W12R5-0875(C)
W12R5-1375(C)
W15R5-1375(C)
W25MR5-0562(C)
W25MR5-0875(C)
Tap Range
Hand
#0-9/16”
#0-9/16”
5/16-7/8”
#0-9/16”
5/16-7/8”
13/16-1-3/8”
13/16-1-3/8”
#0-9/16”
5/16-7/8”
Pipe
1/8”
1/8”
1/4-1/2”
1/8”
1/4-1/2”
1/2-1”
1/2-1”
1/8”
1/4-1/2”
System
D
D1
L1
L2
#1
#1
#2
#1
#2
#3
#3
#1
#2
3/4”
1”
1”
1-1/4”
1-1/4”
1-1/4”
1-1/2”
25mm
25mm
1.26”
1.26”
1.97”
1.26”
1.97”
2.83”
2.83”
32mm
50mm
2.03”
2.28”
2.28”
2.28”
2.28”
2.28”
2.69”
53mm
53mm
1.46”
1.49”
2.12”
1.65”
2.12”
3.27”
3.27”
38mm
54mm
These holders are
designed for use
with synchronized
or compression.
STUB, BORING, BLANK
Part Number
TAP HOLDERS
DRILL CHUCKS
D
127
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
128
POSITIVE DRIVE TAP COLLETS
• Standard collets are used for standard and coolant-thru-the-tool tapping, maximum 750 PSI.
• Slotted collets are designed for use with standard taps for coolant along the flute.
POSITIVE DRIVE TAP COLLETS - STANDARD
D
Part Number
NT05-006
NT05-008
NT05-010
NT05-012
NT05-016
NT05-020
NT05-024
NT05-028
NT05-032
NT05-036
NT10-020
NT10-024
NT10-028
NT10-032
NT10-036
NT10-040
NT10-044
NT10-048
NT10-052
NT10-056
NT15-052
NT15-056
NT15-060
NT15-064
NT15-072
NT15-080
NT15-088
Tap Size
#0-6
#8
#10
#12
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
13/16”
7/8”
15/16”
1”
1-1/8”
1-1/4”
1-3/8”
See dimensional data for tap collets on page 142
System
Tap Shank Ø
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
0.141”
0.168”
0.194”
0.220”
0.255”
0.318”
0.381”
0.323”
0.367”
0.429”
0.318”
0.381”
0.323”
0.367”
0.429”
0.480”
0.542”
0.590”
0.652”
0.697”
0.652”
0.697”
0.760”
0.800”
0.896”
1.021”
1.108”
Drive Square
0.110”
0.131”
0.152”
0.165”
0.191”
0.238”
0.286”
0.242”
0.275”
0.322”
0.238”
0.286”
0.242”
0.275”
0.322”
0.360”
0.406”
0.442”
0.489”
0.523”
0.489”
0.523”
0.570”
0.600”
0.672”
0.766”
0.831”
#0-6
#8
#10
#12
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
13/16”
7/8”
15/16”
1”
1-1/8”
1-1/4”
1-3/8”
Tap Shank Ø
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
0.141”
0.168”
0.194”
0.220”
0.255”
0.318”
0.381”
0.323”
0.367”
0.429”
0.318”
0.381”
0.323”
0.367”
0.429”
0.480”
0.542”
0.590”
0.652”
0.697”
0.652”
0.697”
0.760”
0.800”
0.896”
1.021”
1.108”
Drive Square
0.110”
0.131”
0.152”
0.165”
0.191”
0.238”
0.286”
0.242”
0.275”
0.322”
0.238”
0.286”
0.242”
0.275”
0.322”
0.360”
0.406”
0.442”
0.489”
0.523”
0.489”
0.523”
0.570”
0.600”
0.672”
0.766”
0.831”
END MILL HOLDERS
System
SHELL MILL HOLDERS
NT05-006(S)
NT05-008(S)
NT05-010(S)
NT05-012(S)
NT05-016(S)
NT05-020(S)
NT05-024(S)
NT05-028(S)
NT05-032(S)
NT05-036(S)
NT10-020(S)
NT10-024(S)
NT10-028(S)
NT10-032(S)
NT10-036(S)
NT10-040(S)
NT10-044(S)
NT10-048(S)
NT10-052(S)
NT10-056(S)
NT15-052(S)
NT15-056(S)
NT15-060(S)
NT15-064(S)
NT15-072(S)
NT15-080(S)
NT15-088(S)
Tap Size
COLLET CHUCKS
Part Number
DRILL CHUCKS
COOLANT FLOW
TAP HOLDERS
D
STUB, BORING, BLANK
POSITIVE DRIVE TAP COLLETS - SLOTTED
MILLING CHUCKS
TAP HOLDERS
129
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
POSITIVE DRIVE PIPE TAP COLLETS - STANDARD
Part Number
NTPT05-008S
NTPT05-008L
NTPT10-016
NTPT10-024
NTPT10-032
NTPT15-032
NTPT15-048
NTPT15-064
Tap Size
System
Tap Shank Ø
1/8”S
1/8”L
1/4”
3/8”
1/2”
1/2”
3/4”
1”
#1
#1
#2
#2
#2
#3
#3
#3
0.313”
0.437”
0.562”
0.700”
0.687”
0.687”
0.906”
1.125”
Drive Square
0.234”
0.328”
0.421”
0.531”
0.515”
0.515”
0.679”
0.843”
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
POSITIVE DRIVE PIPE TAP COLLETS - SLOTTED
130
Part Number
NTPT05-008S(S)
NTPT05-008L(S)
NTPT10-016(S)
NTPT10-024(S)
NTPT10-032(S)
NTPT15-032(S)
NTPT15-048(S)
NTPT15-064(S)
Tap Size
sm 1/8”
Ig 1/8”
1/4”
3/8”
1/2”
1/2”
3/4”
1/2”
System
Tap Shank Ø
#1
#1
#2
#2
#2
#3
#3
#3
0.313”
0.437”
0.562”
0.700”
0.687”
0.687”
0.906”
1.125”
Drive Square
0.234”
0.328”
0.421”
0.531”
0.515”
0.515”
0.679”
0.843”
TAP HOLDERS
2.24
2.50
2.80
3.15
3.55
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.0
11.2
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
Drive Square
1.8
2.0
2.24
2.50
2.80
3.15
3.55
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
3.15
3.55
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.0
11.2
12.5
14.0
7.1
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
SHELL MILL HOLDERS
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
Tap Shank Ø
COLLET CHUCKS
M3
M3.5, M2
M2.5, M2.2
M4, M3
M4.5, M3.5
M5, M4
M6
M5
M5
M8, M6
M7
M11, M10, M8
M12 , M9
M10
M14
M5, M4
M6
M5
M5
M8, M6
M7
M11, M10, M8
M12 , M9
M10
M14
M16
M20, M18
M22
M24
M12 , M9
M10
M14
M16
M20, M18
M22
M24
M30, M27
M33
M36, M33
M42, M39
System
DRILL CHUCKS
SE1-2.24X1.8
SE1-2.50X2.0
SE1-2.80X2.24
SE1-3.15X2.50
SE1-3.55X2.80
SE1-4.0X3.15
SE1-4.5X3.55
SE1-5.0X4.0
SE1-5.6X4.5
SE1-6.3X5.0
SE1-7.1X5.6
SE1-8.0X6.3
SE1-9.0X7.1
SE1-10.0X8.0
SE1-11.2X9.0
SE2-4.0X3.15
SE2-4.5X3.55
SE2-5.0X4.0
SE2-5.6X4.5
SE2-6.3X5.0
SE2-7.1X5.6
SE2-8.0X6.3
SE2-9.0X7.1
SE2-10.0X8.0
SE2-11.2X9.0
SE2-12.5X10.0
SE2-14.0X11.2
SE2-16.0X12.5
SE2-18.0X14.0
SE3-9.0X7.1
SE3-10.0X8.0
SE3-11.2X9.0
SE3-12.5X10.0
SE3-14.0X11.2
SE3-16.0X12.5
SE3-18.0X14.0
SE3-20.0X16.0
SE3-22.4X18.0
SE3-25.0X20.0
SE3-28.0X22.4
Tap Size
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
POSITIVE DRIVE TAP COLLETS (STANDARD) - ISO
131
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
132
POSITIVE DRIVE TAP COLLETS (STANDARD) - DIN 371/376
D
Part Number
SE1-2.5X2.1
SE1-2.8X2.1
SE1-3.5X2.7
SE1-4.0X3.0
SE1-4.5X3.4
SE1-6.0X4.9
SE1-7.0X5.5
SE1-8.0X6.2
SE1-9.0X7.0
SE1-10.0X8.0
SE1-11.0X9.0
SE2-2.8X2.1
SE2-3.5X2.7
SE2-4.0X3.0
SE2-4.5X3.4
SE2-6.0X4.9
SE2-7.0X5.5
SE2-8.0X6.2
SE2-9.0X7.0
SE2-10.0X8.0
SE2-11.0X9.0
SE2-12.0X9.0
SE2-14.0X11.0
SE2-16.0X12.0
SE2-18.0X14.5
SE3-9.0X7.0
SE3-10.0X8.0
SE3-11.0X9.0
SE3-12.0X9.0
SE3-14.0X11.0
SE3-16.0X12.0
SE3-18.0X14.5
SE3-20.0X16.0
SE3-22.0X18.0
SE3-25.0X20.0
SE3-28.0X22.0
Tap Size
M1.4, M1.8, M3
M2, M2.2, M2.5, M4
M3, M5
M3.5
M4, M6
M5, M6, M8
M10
M8, M10
M12
M10
M14
M2, M2.2, M2.5, M4
M3, M5
M3.5
M4, M6
M5, M6, M8
M10
M8, M10
M12
M10
M14
M16
M18
M20
M22, M24
M12
M10
M14
M16
M18
M20
M22, M24
M27, M30
M30
M33, M36
M36
System
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
Tap Shank Ø
2.5
2.8
3.5
4.0
4.5
6.0
7.0
8.0
9.0
10.0
11.0
2.8
3.5
4.0
4.5
6.0
7.0
8.0
9.0
10.0
11.0
12.0
14.0
16.0
18.0
9.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
28.0
Drive Square
2.1
2.1
2.7
3.0
3.4
4.9
5.5
6.2
7.0
8.0
9.0
2.1
2.7
3.0
3.4
4.9
5.5
6.2
7.0
8.0
9.0
9.0
11.0
12.0
14.5
7.0
8.0
9.0
9.0
11.0
12.0
14.5
16.0
18.0
20.0
22.0
TAP HOLDERS
3.0
4.0
5.0
5.5
6.0
6.2
7.0
8.0
8.5
9.5
10.5
6.0
6.2
7.0
8.0
8.5
9.5
10.5
12.5
13.0
14.0
15.0
17.0
10.5
12.5
13.0
14.0
15.0
17.0
19.0
20.0
21.0
23.0
24.0
25.0
26.0
28.0
Drive Square
2.5
3.2
4.0
4.5
4.5
5.0
5.5
6.0
6.5
7.0
8.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
10.0
10.0
11.0
12.0
13.0
8.0
10.0
10.0
11.0
12.0
13.0
15.0
15.0
17.0
17.0
19.0
19.0
21.0
21.0
SHELL MILL HOLDERS
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
Tap Shank Ø
COLLET CHUCKS
M2
M3
M4, M4.5
M5, M5.5
M6
M7, M8
M9, M10
M11
M12
M13
M14, M15
M6
M7, M8
M9, M10
M11
M12
M13
M14, M15
M16
M17
M18
M20
M22
M14, M15
M16
M17
M18
M20
M22
M24, M25
M26, M27
M28
M30
M32
M33
M34, M35
M36, M38
System
DRILL CHUCKS
SE1-3.0X2.5
SE1-4.0X3.2
SE1-5.0X4.0
SE1-5.5X4.5
SE1-6.0X4.5
SE1-6.2X5.0
SE1-7.0X5.5
SE1-8.0X6.0
SE1-8.5X6.5
SE1-9.5X7.0
SE1-10.5X8.0
SE2-6.0X4.5
SE2-6.2X5.0
SE2-7.0X5.5
SE2-8.0X6.0
SE2-8.5X6.5
SE2-9.5X7.0
SE2-10.5X8.0
SE2-12.5X10.0
SE2-13.0X10.0
SE2-14.0X11.0
SE2-15.0X12.0
SE2-17.0X13.0
SE3-10.5X8.0
SE3-12.5X10.0
SE3-13.0X10.0
SE3-14.0X11.0
SE3-15.0X12.0
SE3-17.0X13.0
SE3-19.0X15.0
SE3-20.0X15.0
SE3-21.0X17.0
SE3-23.0X17.0
SE3-24.0X19.0
SE3-25.0X19.0
SE3-26.0X21.0
SE3-28.0X21.0
Tap Size
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
POSITIVE DRIVE TAP COLLETS (STANDARD) - JIS
133
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
134
POSITIVE DRIVE TAP COLLET SETS
Part Number
NT05-SET
NT10-SET
NT15-SET
NTP05-SET
NTP10-SET
NTP15-SET
Tap Size
System
Tap Shank Ø
Drive Square
10 piece System #1 Positive Drive Collet Set: #0 - 9/16” hand
10 piece System #2 Positive Drive Collet Set: 5/16” - 7/8” hand
7 piece System #3 Positive Drive Collet Set: 13/16” - 1-3/8” hand
12 piece System #1 Positive Drive Collet Set: #0 - 9/16” hand and 1/8” pipe
13 piece System #2 Positive Drive Collet Set: 5/16” - 1” hand and 1/4” - 1/2” pipe
10 piece System #3 Positive Drive Collet Set: 13/16” - 1-3/8” hand and 1/2” - 1” pipe
TORQUE CONTROL TAP COLLETS
• Standard collets are used for standard and coolant-thru-the-tool tapping. Maximum 750 PSI.
• Slotted collets are designed for use with standard taps for coolant along the flute.
TORQUE CONTROL TAP COLLETS - STANDARD
*Note: This collet is not a quick change collet.
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
0.141”
0.168”
0.194”
0.220”
0.255”
0.318”
0.381”
0.323”
0.367”
0.429”
0.318”
0.381”
0.323”
0.367”
0.429”
0.480”
0.542”
0.590”
0.652”
0.697”
0.800”
0.652”
0.697”
0.760”
0.800”
0.896”
1.021”
1.108”
Drive Square
0.110”
0.131”
0.152”
0.165”
0.191”
0.238”
0.286”
0.242”
0.275”
0.322”
0.238”
0.286”
0.242”
0.275”
0.322”
0.360”
0.406”
0.442”
0.489”
0.523”
0.600”
0.489”
0.523”
0.570”
0.600”
0.672”
0.766”
0.831”
COLLET CHUCKS
Tap Shank Ø
DRILL CHUCKS
#0-6
#8
#10
#12
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
1”
13/16”
7/8”
15/16”
1”
1-1/8”
1-1/4”
1-3/8”
System
TAP HOLDERS
T05-006
T05-008
T05-010
T05-012
T05-016
T05-020
T05-024
T05-028
T05-032
T05-036
T10-020
T10-024
T10-028
T10-032
T10-036
T10-040
T10-044
T10-048
T10-052
T10-056
T10-064*
T15-052
T15-056
T15-060
T15-064
T15-072
T15-080
T15-088
Tap Size
STUB, BORING, BLANK
Part Number
SHELL MILL HOLDERS
END MILL HOLDERS
D
MILLING CHUCKS
TAP HOLDERS
135
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
136
TORQUE CONTROL TAP COLLETS - SLOTTED
D
Part Number
T05-006(S)
T05-008(S)
T05-010(S)
T05-012(S)
T05-016(S)
T05-020(S)
T05-024(S)
T05-028(S)
T05-032(S)
T05-036(S)
T10-020(S)
T10-024(S)
T10-028(S)
T10-032(S)
T10-036(S)
T10-040(S)
T10-044(S)
T10-048(S)
T10-052(S)
T10-056(S)
T10-064(S)*
T15-052(S)
T15-056(S)
T15-060(S)
T15-064(S)
T15-072(S)
T15-080(S)
T15-088(S)
Tap Size
#0-6
#8
#10
#12
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
1”
13/16”
7/8”
15/16”
1”
1-1/8”
1-1/4”
1-3/8”
*Note: This collet is not a quick change collet.
System
Tap Shank Ø
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
0.141”
0.168”
0.194”
0.220”
0.255”
0.318”
0.381”
0.323”
0.367”
0.429”
0.318”
0.381”
0.323”
0.367”
0.429”
0.480”
0.542”
0.590”
0.652”
0.697”
0.800”
0.652”
0.697”
0.760”
0.800”
0.896”
1.021”
1.108”
Drive Square
0.110”
0.131”
0.152”
0.165”
0.191”
0.238”
0.286”
0.242”
0.275”
0.322”
0.238”
0.286”
0.242”
0.275”
0.322”
0.360”
0.406”
0.442”
0.489’
0.523”
0.600”
0.489”
0.523”
0.570”
0.600”
0.672”
0.766”
0.831”
Part Number
Tap Size
System
Tap Shank Ø
TPT05-008S
TPT05-008L
TPT10-016
TPT10-024
TPT10-032
TPT15-032
TPT15-048
TPT15-064
1/8”S
1/8”L
1/4”
3/8”
1/2”
1/2”
3/4”
1”
#1
#1
#2
#2
#2
#3
#3
#3
0.313”
0.437”
0.562”
0.700”
0.687”
0.687”
0.906”
1.125”
Drive Square
0.234”
0.328”
0.421”
0.531”
0.515”
0.515”
0.679”
0.843”
END MILL HOLDERS
TORQUE CONTROL PIPE TAP COLLETS - STANDARD
MILLING CHUCKS
TAP HOLDERS
1/8”S
1/8”L
1/4”
3/8”
1/2”
1/2”
3/4”
1”
#1
#1
#2
#2
#2
#3
#3
#3
0.313”
0.437”
0.562”
0.700”
0.687”
0.687”
0.906”
1.125”
System
Tap Shank Ø
Drive Square
0.234”
0.328”
0.421”
0.531”
0.515”
0.515”
0.679”
0.843”
TORQUE CONTROL TAP COLLET SETS
Part Number
T05-SET
T10-SET
T15-SET
TP05-SET
TP10-SET
TP15-SET
Tap Size
COLLET CHUCKS
Tap Shank Ø
Drive Square
10 piece System #1 Torque Control Collet Set: #0 - 9/16” hand
10 piece System #2 Torque Control Collet Set: 5/16” - 7/8” hand
7 piece System #3 Torque Control Collet Set: 13/16” - 1-3/8” hand
12 piece System #1 Torque Control Collet Set: #0 - 9/16” hand and 1/8” pipe
13 piece System #2 Torque Control Collet Set: 5/16” - 7/8” hand and 1/4” - 1/2” pipe
10 piece System #3 Torque Control Collet Set: 13/16” - 1-3/8” hand and 1/2” - 1” pipe
DRILL CHUCKS
System
TAP HOLDERS
TPT05-008S(S)
TPT05-008L(S)
TPT10-016(S)
TPT10-024(S)
TPT10-032(S)
TPT15-032(S)
TPT15-048(S)
TPT15-064(S)
Tap Size
STUB, BORING, BLANK
Part Number
SHELL MILL HOLDERS
TORQUE CONTROL PIPE TAP COLLETS - SLOTTED
137
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
138
TORQUE CONTROL TAP COLLETS (STANDARD) - ISO
D
Part Number
SES1-2.24X1.8
SES1-2.50X2.0
SES1-2.80X2.24
SES1-3.15X2.50
SES1-3.55X2.80
SES1-4.0X3.15
SES1-4.5X3.55
SES1-5.0X4.0
SES1-5.6X4.5
SES1-6.3X5.0
SES1-7.1X5.6
SES1-8.0X6.3
SES1-9.0X7.1
SES1-10.0X8.0
SES1-11.2X9.0
SES2-4.0X3.15
SES2-4.5X3.55
SES2-5.0X4.0
SES2-5.6X4.5
SES2-6.3X5.0
SES2-7.1X5.6
SES2-8.0X6.3
SES2-9.0X7.1
SES2-10.0X8.0
SES2-11.2X9.0
SES2-12.5X10.0
SES2-14.0X11.2
SES2-16.0X12.5
SES2-18.0X14.0
SES3-9.0X7.1
SES3-10.0X8.0
SES3-11.2X9.0
SES3-12.5X10.0
SES3-14.0X11.2
SES3-16.0X12.5
SES3-18.0X14.0
SES3-20.0X16.0
SES3-22.4X18.0
SES3-25.0X20.0
SES3-28.0X22.4
Tap Size
M3
M3.5, M2
M2.5, M2.2
M4, M3
M4.5, M3.5
M5, M4
M6
M5
M5
M8, M6
M7
M11, M10, M8
M12 , M9
M10
M14
M5, M4
M6
M5
M5
M8, M6
M7
M11, M10, M8
M12 , M9
M10
M14
M16
M20, M18
M22
M24
M12 , M9
M10
M14
M16
M20, M18
M22
M24
M30, M27
M33
M36, M33
M42, M39
System
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
Tap Shank Ø
2.24
2.50
2.80
3.15
3.55
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.0
11.2
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
25.0
28.0
Drive Square
1.8
2.0
2.24
2.50
2.80
3.15
3.55
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
3.15
3.55
4.0
4.5
5.0
5.6
6.3
7.1
8.0
9.0
10.0
11.2
12.5
14.0
7.1
8.0
9.0
10.0
11.2
12.5
14.0
16.0
18.0
20.0
22.4
TAP HOLDERS
2.5
2.8
3.5
4.0
4.5
6.0
7.0
8.0
9.0
10.0
11.0
3.5
4.0
4.5
6.0
7.0
8.0
9.0
10.0
11.0
12.0
14.0
16.0
18.0
8.0
9.0
10.0
11.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
28.0
Drive Square
2.1
2.1
2.7
3.0
3.4
4.9
5.5
6.2
7.0
8.0
9.0
2.7
3.0
3.4
4.9
5.5
6.2
7.0
8.0
9.0
9.0
11.0
12.0
14.5
6.2
7.0
8.0
9.0
9.0
11.0
12.0
14.5
16.0
18.0
20.0
22.0
SHELL MILL HOLDERS
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
Tap Shank Ø
COLLET CHUCKS
M1.4, M1.8, M3
M2, M2.2, M2.5, M4
M3, M5
M3.5
M4, M6
M5, M6, M8
M10
M8, M10
M12
M10
M14
M3, M5
M3.5
M4, M6
M5, M6, M8
M10
M8, M10
M12
M10
M14
M16
M18
M20
M22, M24
M8, M10
M12
M10
M14
M16
M18
M20
M22, M24
M27, M30
M30
M33, M36
M36
System
DRILL CHUCKS
SES1-2.5X2.1
SES1-2.8X2.1
SES1-3.5X2.7
SES1-4.0X3.0
SES1-4.5X3.4
SES1-6.0X4.9
SES1-7.0X5.5
SES1-8.0X6.2
SES1-9.0X7.0
SES1-10.0X8.0
SES1-11.0X9.0
SES2-3.5X2.7
SES2-4.0X3.0
SES2-4.5X3.4
SES2-6.0X4.9
SES2-7.0X5.5
SES2-8.0X6.2
SES2-9.0X7.0
SES2-10.0X8.0
SES2-11.0X9.0
SES2-12.0X9.0
SES2-14.0X11.0
SES2-16.0X12.0
SES2-18.0X14.5
SES3-8.0X6.2
SES3-9.0X7.0
SES3-10.0X8.0
SES3-11.0X9.0
SES3-12.0X9.0
SES3-14.0X11.0
SES3-16.0X12.0
SES3-18.0X14.5
SES3-20.0X16.0
SES3-22.0X18.0
SES3-25.0X20.0
SES3-28.0X22.0
Tap Size
TAP HOLDERS
Part Number
STUB, BORING, BLANK
D
END MILL HOLDERS
MILLING CHUCKS
TORQUE CONTROL TAP COLLETS (STANDARD) - DIN 371/376
139
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
140
TORQUE CONTROL TAP COLLETS (STANDARD) - JIS
D
Part Number
SES1-3.0X2.5
SES1-4.0X3.2
SES1-5.0X4.0
SES1-5.5X4.5
SES1-6.0X4.5
SES1-6.2X5.0
SES1-7.0X5.5 (JIS)
SES1-8.0X6.0
SES1-8.5X6.5
SES1-9.5X7.0
SES1-10.5X8.0
SES2-6.0X4.5
SES2-6.2X5.0
SES2-7.0X5.5 (JIS)
SES2-8.0X6.0
SES2-8.5X6.5
SES2-9.5X7.0
SES2-10.5X8.0
SES2-12.5X10.0
SES2-13.0X10.0
SES2-14.0X11.0 (JIS)
SES2-15.0X12.0
SES2-17.0X13.0
SES3-10.5X8.0
SES3-12.5X10.0
SES3-13.0X10.0
SES3-14.0X11.0 (JIS)
SES3-15.0X12.0
SES3-17.0X13.0
SES3-19.0X15.0
SES3-20.0X15.0
SES3-21.0X17.0
SES3-23.0X17.0
SES3-24.0X19.0
SES3-25.0X19.0
SES3-26.0X21.0
SES3-28.0X21.0
Tap Size
M2
M3
M4, M4.5
M5, M5.5
M6
M7, M8
M9, M10
M11
M12
M13
M14, M15
M6
M7, M8
M9, M10
M11
M12
M13
M14, M15
M16
M17
M18
M20
M22
M14, M15
M16
M17
M18
M20
M22
M24, M25
M26, M27
M28
M30
M32
M33
M34, M35
M36, M38
System
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#1
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#2
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
#3
Tap Shank Ø
3.0
4.0
5.0
5.5
6.0
6.2
7.0
8.0
8.5
9.5
10.5
6.0
6.2
7.0
8.0
8.5
9.5
10.5
12.5
13.0
14.0
15.0
17.0
10.5
12.5
13.0
14.0
15.0
17.0
19.0
20.0
21.0
23.0
24.0
25.0
26.0
28.0
Drive Square
2.5
3.2
4.0
4.5
4.5
5.0
5.5
6.0
6.5
7.0
8.0
4.5
5.0
5.5
6.0
6.5
7.0
8.0
10.0
10.0
11.0
12.0
13.0
8.0
10.0
10.0
11.0
12.0
13.0
15.0
15.0
17.0
17.0
19.0
19.0
21.0
21.0
TAP HOLDERS
CRE-2/1
CRE-3/1
CRE-3/2
System# 2 Reduction Adapter to System #1
TAP COLLETS RACKS
Part Number
System #1 Tap Collet Rack, 16 Collet Capacity
System #2 Tap Collet Rack, 16 Collet Capacity
SPANNER WRENCHES
T05-SPAN
T10-SPAN
T15-SPAN
Description
Fits System #1 Torque Control Tap Collets
TAP HOLDERS
Part Number
STUB, BORING, BLANK
1-RACK
2-RACK
Description
SHELL MILL HOLDERS
Description
COLLET CHUCKS
Part Number
DRILL CHUCKS
D
END MILL HOLDERS
MILLING CHUCKS
TAP COLLETS REDUCERS
141
POSITIVE DRIVE TAP COLLETS DIMENSIONAL DATA
Type
System #1
System #2
System #3
L
D1
D2
0.27”
0.43”
0.55”
1.18”
1.89”
2.75”
0.75”
1.22”
1.89”
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
TAP HOLDERS
142
TORQUE CONTROL TAP COLLETS DIMENSIONAL DATA
Type
System #1
System #2
System #3
L
D1
D2
0.98”
1.34”
1.77”
1.28”
1.99”
2.83”
0.75”
1.22”
1.89”
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
STUB,
BORING,
STUB,
BORING,BLANK
BLANK
143
CT TAPER STUB MILL HOLDERS
D
SHELL MILL HOLDERS
END MILL HOLDERS
MILLING CHUCKS
STUB, BORING, BLANK
Part Number
Taper
d
L
D
L1
Key Size
C4002-1000
C4002-1250
C4002-1500
C4502-1000
C4502-1250
C5002-1000
C5002-1250
C5002-1500
CT40
CT40
CT40
CT45
CT45
CT50
CT50
CT50
1”
1-1/4”
1-1/2”
1”
1-1/4”
1”
1-1/4”
1-1/2”
6.17”
6.29”
6.60”
6.17”
6.29”
6.17”
6.28”
6.60”
1.50”
1.75”
2.12”
1.50”
1.75”
1.50”
1.75”
2.12”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
1/4”
5/16”
3/8”
1/4”
5/16”
1/4”
5/16”
3/8”
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
BT TAPER STUB MILL HOLDERS
144
D
Part Number
Taper
d
L
D
L1
Key Size
B3002-0750
B3002-1000
B3502-0750
B3502-1000
B3502-1250
B4002-1000
B4002-1250
B4002-1500
B4502-1000
B4502-1250
B4502-1500
B5002-1000
B5002-1250
B5002-1500
BT30
BT30
BT35
BT35
BT35
BT40
BT40
BT40
BT45
BT45
BT45
BT50
BT50
BT50
3/4”
1”
3/4”
1”
1-1/4”
1”
1-1/4”
1-1/2”
1”
1-1/4”
1-1/2”
1”
1-1/4”
1-1/2”
4.97”
5.17”
4.97”
5.17”
5.28”
5.18”
5.32”
5.60”
6.17”
6.28”
6.60”
6.17”
6.28”
6.60”
1.25”
1.50”
1.25”
1.50”
1.75”
1.50”
1.75”
2.12”
1.50”
1.75”
2.12”
1.50”
1.75”
2.12”
3.00”
3.00”
3.00”
3.00”
3.00”
3.00”
3.00”
3.00”
4.00”
4.00”
4.00”
4.00”
4.00”
4.00”
1/8”
1/4”
1/8”
1/4”
5/16”
1/4”
5/16”
3/8”
1/4”
5/16”
3/8”
1/4”
5/16”
3/8”
Note: Complete with 1/8”, 1/4”, 3/8”, and 1/2” arbor spacers plus a securing nut.
STUB, BORING, BLANK
NMTB30
NMTB30
NMTB30
NMTB40
NMTB40
NMTB40
NMTB40
NMTB50
NMTB50
NMTB50
3/4”
1”
1-1/4”
3/4”
1”
1-1/4”
1-1/2”
1”
1-1/4”
1-1/2”
L
D
L1
Key Size
4.97”
5.18”
5.28”
5.00”
5.18”
5.28”
5.62
6.18”
6.28”
6.60”
1.25”
1.50”
1.75”
1.25”
1.50”
1.75”
2.12”
1.50”
1.75”
2.12”
3.00”
3.00”
3.00”
3.00”
3.00”
3.00”
3.00”
4.00”
4.00”
4.00”
1/8”
1/4”
5/16”
1/8”
1/4”
5/16”
3/8”
1/4”
5/16”
3/8”
COLLET CHUCKS
R8 STUB MILL HOLDERS
D
Part Number
880-064
880-080
Taper
d
L
D
L1
Key Size
R8
R8
1.00”
1.25”
2.76”
2.82”
1.50”
1.75”
0.48”
0.50”
1/4”
5/16”
Complete with 1/8”, 1/4”, 3/8”, and 1/2” arbor spacers plus a securing nut.
DRILL CHUCKS
N3002-0750
N3002-1000
N3002-1250
N4002-0750
N4002-1000
N4002-1250
N4002-1500
N5002-1000
N5002-1250
N5002-1500
d
TAP HOLDERS
Taper
STUB, BORING, BLANK
Part Number
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
NMTB TAPER STUB MILL HOLDERS
145
END MILL HOLDERS
MILLING CHUCKS
STUB, BORING, BLANK
REPLACEMENT STUB MILL HOLDER NUTS
Part Number
Stub Mill Holder Size
3/4-STUBNUT
1-STUBNUT
1-1/4-STUBNUT
1-1/2-STUBNUT
3/4”
1”
1-1/4”
1-1/2”
REPLACEMENT STUB MILL HOLDER SPACERS
STUB, BORING, BLANK
TAP HOLDERS
DRILL CHUCKS
COLLET CHUCKS
SHELL MILL HOLDERS
Part Number
146
SP3/4-1/8
SP3/4-1/4
SP3/4-3/8
SP3/4-1/2
SP1-1/8
SP1-1/4
SP1-3/8
SP1-1/2
SP1-1/4-1/8
SP1-1/4-1/4
SP1-1/4-3/8
SP1-1/4-1/2
SP1-1/2-1/8
SP1-1/2-1/4
SP1-1/2-3/8
SP1-1/2-1/2
Description
1/8”
1/4”
3/8”
1/2”
1/8”
1/4”
3/8”
1/2”
1/8”
1/4”
3/8”
1/2”
1/8”
1/4”
3/8”
1/2”
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
Spacer
for
for
for
for
for
for
for
for
for
for
for
for
for
for
for
for
3/4” Holder
3/4” Holder
3/4” Holder
3/4” Holder
1” Holder
1” Holder
1” Holder
1” Holder
1-1/4” Holder
1-1/4” Holder
1-1/4” Holder
1-1/4” Holder
1-1/2” Holder
1-1/2” Holder
1-1/2” Holder
1-1/2” Holder
STUB, BORING, BLANK
Part Number
Taper
Thread
L
L1
D
C40BH-0875
C40BH-1500
C45BH-0875
C45BH-1500
C50BH-0875
C50BH-1500
CT40
CT40
CT45
CT45
CT50
CT50
7/8”-20
1-1/2”-18
7/8”-20
1-1/2”-18
7/8”-20
1-1/2”-18
1.75”
1.75”
1.75”
1.75”
1.75”
1.75”
0.44”
0.50”
0.44”
0.50”
0.44”
0.50”
1.75”
2.96”
1.75”
2.96”
1.75”
2.96”
BT TAPER BORING HEAD HOLDERS
SHELL MILL HOLDERS
D
END MILL HOLDERS
MILLING CHUCKS
CT TAPER BORING HEAD HOLDERS
Thread
L
L1
D
B30BH-0875
B30BH-1500
B40BH-0875
B40BH-1500
B50BH-0875
B50BH-1500
BT30
BT30
BT40
BT40
BT50
BT50
7/8”-20
1-1/2”-18
7/8”-20
1-1/2”-18
7/8”-20
1-1/2”-18
1.75”
1.75”
1.75”
1.75”
1.75”
1.75”
0.44”
0.50”
0.44”
0.50”
0.44”
0.50”
1.75”
2.96”
1.75”
2.96”
1.75”
2.96”
NMTB TAPER BORING HEAD HOLDERS
Part Number
Taper
Thread
L
L1
D
N40BH-0875
N40BH-1500
N50BH-0875
N50BH-1500
NMTB40
NMTB40
NMTB50
NMTB50
7/8”-20
1-1/2”-18
7/8”-20
1-1/2”-18
1.75”
1.75”
1.75”
1.75”
0.44”
0.50”
0.44”
0.50”
1.75”
2.96”
1.75”
2.94”
TAP HOLDERS
Taper
STUB, BORING, BLANK
Part Number
DRILL CHUCKS
COLLET CHUCKS
D
147
MILLING CHUCKS
STUB, BORING, BLANK
BLANK BARS
Our Blank Bars are suitable for all applications - even deep boring. While the tapers are ground
and hardened, their projections are not.
CT TAPER BLANK BARS
SHELL MILL HOLDERS
END MILL HOLDERS
D
Part Number
Taper
L
C4008-0013
C5008-0013
CT40
CT50
13.00”
13.00”
Part Number
Taper
L
B3008-0008
B3508-0013
B4008-0013
B5008-0013
BT30
BT35
BT40
BT50
8.00”
13.00”
13.00”
13.00”
Part Number
Taper
L
N4008-0013
N5008-0013
NMTB40
NMTB50
13.00”
13.00”
Taper
L
HSK40A
HSK63A
HSK100A
8.00”
13.00”
13.00”
D
2.50”
3.88”
BT TAPER BLANK BARS
TAP HOLDERS
NMTB TAPER BLANK BARS
STUB, BORING, BLANK
DRILL CHUCKS
COLLET CHUCKS
D
HSK TAPER BLANK BARS
148
Part Number
HSK40A-BLANK-8.00
HSK63A-BLANK-13.00
HSK100A-BLANK-13.00
D
2.25”
2.38”
2.50”
3.88”
D
2.50”
3.88”
D
2.00”
2.50”
3.75”
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
149
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
150
R8 COLLETS
D
Part Number
Size
Part Number
Size
800-024
800-026
800-028
800-030
800-032
800-034
800-036
800-038
800-040
800-042
3/8”
13/32”
7/16”
15/32”
1/2”
17/32”
9/16”
19/32”
5/8”
21/32”
800-004
800-006
800-008
800-010
800-012
800-014
800-016
800-018
800-020
800-022
1/16”
3/32”
1/8”
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
860-001S
R8 Steel Emergency Collet: 1/16” pilot hole
Part Number
800-044
800-046
800-048
800-050
800-052
800-054
800-056
800-064
R8 COLLET SETS
Part Number
810-006
810-008
810-011
810-012
810-013
810-014
810-021
810-023
810-025
810-027
Description
6 Piece R8 Collet Set
Set Configuration
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
1/8” - 3/4” by 8ths
1/8” - 1” by 8ths
1/8” - 3/4” by 16ths
1/8” - 3/4” by 16ths + 7/8”
1/8” - 7/8” by 16ths
1/16”-7/8” by 16ths
1/8” - 3/4” by 32nds
1/16” - 3/4” by 32nds
1/8” - 7/8” by 32nds
1/16” - 7/8” by 32nds
Size
11/16”
23/32”
3/4”
25/32”
13/16”
27/32”
7/8’
1”
Part Number
Size
Part Number
Size
820-003
820-004
820-005
820-006
820-007
820-008
820-009
820-010
820-011
3mm
4mm
5mm
6mm
7mm
8mm
9mm
10mm
11mm
820-012
820-013
820-014
820-015
820-016
820-017
820-018
820-019
820-020
12mm
13mm
14mm
15mm
16mm
17mm
18mm
19mm
20mm
R8 COLLET RACK
Metal Rack holds 16 R8 Collets
ACCESSORIES
R816-RACK
Size
TECHNICAL SECTION
Part Number
RETENTION STUDS
R8 METRIC COLLETS
151
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
5C ROUND COLLETS
D
0
Part Number
Size
Part Number
500-027
500-028
500-029
500-030
500-031
500-032
500-033
500-034
500-035
500-036
500-037
500-038
500-039
500-040
500-041
500-042
500-043
500-044
500-045
500-046
500-047
500-048
500-049
500-050
Size
27/64”
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
49/64”
25/32”
Part Number
Size
500-051
500-052
500-053
500-054
500-055
500-056
500-057
500-058
500-059
500-060
500-061
500-062
500-063
500-064
500-065
500-066
500-067
500-068
500-069
500-070
500-071
500-072
51/64”
13/16”
53/64”
27/32”
55/64”
7/8”
57/64”
29/32”
59/64”
15/16”
61/64”
31/32”
63/64”
1”
1-1/64”
1-1/32”
1-3/64”
1-1/16”
1-5/64”
1-3/32”
1-7/64”
1-1/8”
500-003
500-004
500-005
500-006
500-007
500-008
500-009
500-010
500-011
500-012
500-013
500-014
500-015
500-016
500-017
500-018
500-019
500-020
500-021
500-022
500-023
500-024
500-025
500-026
3/64”
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
560-001B
560-001S
5C Brass Emergency Collet has 1/16” pilot hole
5C Steel Emergency Collet has 1/16” pilot hole and hardened threads
Note: All Lyndex-Nikken 5C collets (except step collets) have external and internal threads.
152
Part Number
520-003
520-004
520-005
520-006
520-007
520-008
520-009
520-010
Size
Part Number
520-011
520-012
520-013
520-014
520-015
520-016
520-017
520-018
3mm
4mm
5mm
6mm
7mm
8mm
9mm
10mm
Size
Part Number
520-019
520-020
520-021
520-022
520-023
520-024
520-025
520-026
11mm
12mm
13mm
14mm
15mm
16mm
17mm
18mm
Size
19mm
20mm
21mm
22mm
23mm
24mm
25mm
26mm
ACCESSORIES
0
D
RETENTION STUDS
5C METRIC ROUND COLLETS
5C COLLET SETS
510-008
510-009
510-009S
510-015
510-016
510-016S
510-017
510-018
510-024
510-029
510-031
510-031S
510-033
510-035
510-061
510-061S
510-065
510-065S
510-069
580-007
580-013
580-106
580-011
Description
8 Piece 5C CoIlet Set
15 Piece 5C Collet Set
24 Piece 5C Collet Set, Metric
7 Piece 5C Hex Collet Set
13 Piece 5C Hex Collet Set
6 Piece 5C Square Collet Set
11 Piece 5C Square Collet Set
Set Configuration
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
Range:
1/8” - 1” by 8ths
1/8” - 1-1/8” by 8ths
1/16” + 1/8” - 1” by 8ths
1/8” - 1” by 16ths
1/8”- 1-1/16” by 16ths
1/16” - 1” by 16ths
1/16” - 1-1/16” by 16ths
1/16”- 1-1/8” by 16ths
3.0 - 26.0mm x 1.0mm
1/8” - 1” by 32nds
1/8” - 1-1/16” by 32nds
1/16” - 1” by 32nds
1/16” - 1-1/16” by 32nds
1/16” - 1-1/8” by 32nds
1/8”- 1-1/16” by 64ths
1/16” - 1” by 64ths
1/8”- 1-1/8” by 64ths
1/16” - 1-1/16” by 64ths
1/16” - 1-1/8” by 64ths
1/8” - 7/8” by 8ths
1/8” - 7/8” by 16ths
1/8” - 3/4” by 8ths
1/8” - 3/4” by 16ths
TECHNICAL SECTION
Part Number
153
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
5C HEX COLLETS
Part Number
Size
Part Number
530-008
530-012
530-016
530-020
530-024
530-028
530-032
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
530-036
530-040
530-044
530-048
530-052
530-056
Size
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
5C SQUARE COLLETS
Part Number
Size
Part Number
Size
540-008
540-012
540-016
540-020
540-024
540-028
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
540-032
540-036
540-040
540-044
540-048
Part Number
Size
Part Number
Size
550-002
550-003
550-004
2”
3”
4”
550-005
550-006
5”
6”
1/2”
9/16”
5/8”
11/16”
3/4”
5C STEP COLLETS
Step Collets have a soft face for easy machining.
Their hardened bodies have external threads but no internal threads.
154
Adjustable Threaded Collet Stop
Universal Collet Stop
Non-Threading Depth Retainer Collet Stop
5C COLLET BLOCKS
Part Number
570-HEX
570-SQUARE
570-CLOSE
570-RING
570-BLOCK
Size
Hex Block with Tightening Ring
Square Block with Tightening Ring
Quick Closer
Tightening Ring
Complete Set (all of the above)
5C COLLET RACK
Part Number
Size
5C30–RACK
Metal Rack holds 30 5C Collets
RETENTION STUDS
570-ADJ
570-UNI
570-USA
Size
ACCESSORIES
Part Number
TECHNICAL SECTION
5C COLLET STOPS
5C COLLET WRENCH
Part Number
Size
5C-WRENCH
5C Collet Wrench
155
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
3J ROUND COLLETS
D
3.75"
Part Number
300-004
300-005
300-006
300-007
300-008
300-009
300-010
300-011
300-012
300-013
300-014
300-015
300-016
300-017
300-018
300-019
300-020
300-021
300-022
300-023
300-024
300-025
300-026
300-027
300-028
360-001S
Size
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
7/16”
Part Number
300-029
300-030
300-031
300-032
300-033
300-034
300-035
300-036
300-037
300-038
300-039
300-040
300-041
300-042
300-043
300-044
300-045
300-046
300-047
300-048
300-049
300-050
300-051
300-052
300-053
Size
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
49/64”
25/32”
51/64”
13/16”
53/64”
Part Number
300-054
300-055
300-056
300-057
300-058
300-059
300-060
300-061
300-062
300-063
300-064
300-068
300-072
300-076
300-080
300-084
300-088
300-092
300-096
300-100
300-104
300-108
300-112
Steel Emergency Collet has 1/16” pilot hole and hardened threads
Note: All 3J Collets have external threads only.
156
1.988 - 20RH
14°
2.00"
2.20"
Size
27/32”
55/64”
7/8”
57/64”
29/32”
59/64”
15/16”
61/64”
31/32”
63/64”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
Part Number
Size
Part Number
Size
330-016
330-020
330-024
330-028
330-032
330-036
330-040
330-044
330-048
330-052
330-056
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
330-060
330-064
330-068
330-072
330-076
330-080
330-084
330-088
330-092
330-096
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4’
1-5/16”
1-3/8”
1-7/16”
1-1/2”
Size
RETENTION STUDS
3J HEX COLLETS
Size
Part Number
340-016
340-020
340-024
340-028
340-032
340-036
340-040
340-044
340-048
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
340-052
340-056
340-060
340-064
340-068
340-072
340-076
340-080
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/1 6”
1-1/4”
3J COLLET STOP
Part Number
370-USA
TECHNICAL SECTION
Part Number
ACCESSORIES
3J SQUARE COLLETS
Size
Non-Threading Depth Retainer 3J Collet Stop
3J COLLET WRENCH
Part Number
3J-WRENCH
Size
3J Collet Wrench
157
16C ROUND COLLETS
D
M47.5 x P1.75RH
20°
1.89"
2.26"
1-11/16 - 20RH
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
4.31"
Part Number
Size
Part Number
160-028
160-029
160-030
160-031
160-032
160-033
160-034
160-035
160-036
160-037
160-038
160-039
160-040
160-041
160-042
160-043
160-044
160-045
160-046
160-047
160-048
160-049
160-050
160-051
Size
7/16”
29/64”
15/32”
31/64”
1/2”
33/64”
17/32”
35/64”
9/16”
37/64”
19/32”
39/64”
5/8”
41/64”
21/32”
43/64”
11/16”
45/64”
23/32”
47/64”
3/4”
49/64”
25/32”
51/64”
Size
160-052
160-053
160-054
160-055
160-056
160-057
160-058
160-059
160-060
160-061
160-062
160-063
160-064
160-068
160-072
160-076
160-080
160-084
160-088
160-092
160-096
160-100
160-104
13/16”
53/64”
27/32”
55/64”
7/8”
57/64”
29/32”
59/64”
15/16”
61/64”
31/32”
63/64”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
160-004
160-005
160-006
160-007
160-008
160-009
160-010
160-011
160-012
160-013
160-014
160-015
160-016
160-017
160-018
160-019
160-020
160-021
160-022
160-023
160-024
160-025
160-026
160-027
1/16”
5/64”
3/32”
7/64”
1/8”
9/64”
5/32”
11/64”
3/16”
13/64”
7/32”
15/64”
1/4”
17/64”
9/32”
19/64”
5/16”
21/64”
11/32”
23/64”
3/8”
25/64”
13/32”
27/64”
166-001S
Steel Emergency Collet has 1/16” pilot hole and hardened threads
Note: All Lyndex-Nikken 16C collets have external and internal threads.
158
Part Number
Part Number
Size
Part Number
Size
163-008
163-012
163-016
163-020
163-024
163-028
163-032
163-036
163-040
163-044
163-048
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
163-052
163-056
163-060
163-064
163-068
163-072
163-076
163-080
163-084
163-088
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
RETENTION STUDS
16C HEX COLLETS
Size
Part Number
Size
164-008
164-012
164-016
164-020
164-024
164-028
164-032
164-036
164-040
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
164-044
164-048
164-052
164-056
164-060
164-064
164-068
164-072
164-076
11/16”
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
16C COLLET STOP
Part Number
160–USA
TECHNICAL SECTION
Part Number
ACCESSORIES
16C SQUARE COLLETS
Size
Non-Threading Depth Retainer 16C Collet Stop
16C COLLET WRENCH
Part Number
Size
16C–WRENCH
16C Collet Wrench
159
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
THROUGH
YEARS...
R8/5C/3J/16CTHE
COLLETS
Lyndex Through the Years
Lyndex began in 1979 as a
supplier of 5C and R8 collets
and now has become one of
the premier suppliers of tool
holding solutions. Over the
past 25 years we have offered
many different products and
will continue to offer the best
solutions to our customers.
Lyndex-Nikken thanks you for
your business and hope we can
continue to meet your tooling
needs for the next 25 years!
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
R8/5C/3J/16C COOLETS
RETENTION STUDS
161
RETENTION STUDS
How to order studs:
Retention studs come in many shapes and sizes.
Many machining center manufacturers use
different stud configurations on each of their
models.
Please provide us with the following information
when ordering studs:
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
• Your machining center’s taper size
(50, 40, etc.) and flange type (CT or BT)
162
• The brand name of your machining center
• Its configuration (vertical or horizontal)
• The model number
The drawing below details the five critical
dimensions needed to determine which
retention stud is required.
Please have these dimensions ready when you
place your order, so that we may easily and
quickly determine which retention stud is
needed for your machining center.
d1
d2
L1
0.75
0.75
0.59
0.59
0.59
0.59
0.59
0.59
0.59
0.59
0.59
0.59
0.59
0.59
0.74
0.74
0.59
0.59
0.59
0.75
0.75
0.75
0.94
1.10
1.10
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.90
1.14
1.14
0.90
0.91
0.94
0.906
0.94
0.276
0.276
--0.177
---0.177
---0.177
-0.276
0.276
0.197/0.157
-----0.354
0.393
0.393
--0.393
--0.393
--0.393
0.460
0.460
---0.275
0.314
---0.640
---0.640
---0.640
---0.640
0.640
0.625
--------1.031
--1.031
--1.031
--1.031
---1.023
--
0.790
0.790
0.990
0.990
0.990
0.990
0.990
0.990
0.990
0.990
0.990
0.990
0.990
0.990
0.440
0.440
0.992
0.777
0.590
1.230
1.230
1.230
0.578
0.992
0.980
1.386
1.386
1.386
1.386
1.386
1.386
1.386
1.386
1.386
0.700
0.700
1.385
1.385
0.905
1.378
0.905
L2
1.03
1.02
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
1.26
0.64
0.64
1.26
1.05
0.87
1.58
1.58
1.58
0.82
1.35
1.35
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.78
1.00
1.00
1.78
1.78
1.22
3.248
1.22
Angle º
W
Thread
75
75
45
45
45
45
60
60
60
60
90
90
90
90
45
45
45
90
90
45
60
90
45
75
75
45
45
45
60
60
60
90
90
90
45
45
90
90
90
30
90
0.28
0.16
0.12
0.12
0.12
0.23
0.12
0.12
0.12
0.23
0.12
0.12
0.12
0.23
0.12
0.12
0.12
0.20
0.20
0.31
0.31
0.31
0.16
0.28
0.20
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.39
0.20
0.20
0.39
0.69
0.20
0.39
0.39
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
5/8"-11
3/4"-10
3/4"-10
3/4"-10
3/4"-10
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1"-8
1-8UNC
O-RING
-P9
--------------S-15 / P-5
----------------------S24
PS-P13 with hole
RETENTION STUDS
C40-1500*
C40-1500ISO*
C40-4500
C40-4500B
C40-4500H
C40S-4500
C40-6000
C40-6000B
C40-6000H
C40S-6000
C40-9000
C40-9000B
C40-9000H
C40S-9000
C40-STD*
C40-STD(B)
C40-HITACHI
C40-MAZAK
C40-MITSUI
C45-4500
C45-6000
C45-9000
C45-STD*
C50-1500*
C50-150ISO*
C50-4500
C50-4500B
C50-4500H
C50-6000
C50-6000B
C50-6000H
C50-9000
C50-9000B
C50-9000H
C50-STD*
C50-STD(B)
C50-HITACHI
C50-MAZAK
C50-MITSUI
C50-OKUMA(H)
PS-P14
D
ACCESSORIES
Part Number
TECHNICAL SECTION
CT TAPER RETENTION STUDS
RETENTION STUDS
Note: * or “H” suffix denote retention studs supplied with a coolant hole.
“B” suffix denotes balanceable toolholder retention studs.
163
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
RETENTION STUDS
BT TAPER RETENTION STUDS
Part Number
PS-M10
PS-19
PS-801
B30-4500
B30-6000
B35-4500
B35-6000
B35-9000
PS-70
PS-P5-1
PS-G5
PS-G58
PS-805
PS-G51
PS-G510
PS-354
PS-G52
PS-364
B40-1500*
B40-1500ISO*
B40-4500
B40-4500H
B40-6000
B40-6000H
B40-9000
B40-9000H
B40-STD*
B40-FADAL
B45-4500
B45-6000
B45-9000
PS-50
PS-G45
PS-B1
PS-809
PS-C
PS-810
PS-816-1
PS-833
PS-G41
PS-P16
B50-4500
B50-4500H
B50-6000
B50-6000H
B50-9000
B50-9000H
B50-MITSUI
D
d1
d2
L1
L2
Angle º
W
Thread
0.55
0.512
0.472
0.430
0.430
0.510
0.540
0.550
0.748
0.591
0.591
0.740
0.748
0.740
0.740
0.594
0.74
0.59
0.750
0.750
0.590
0.590
0.590
0.590
0.590
0.590
0.740
0.740
0.750
0.750
0.750
0.906
1.140
0.866
1.102
0.827
1.102
1.102
1.102
1.140
0.945
0.910
0.910
0.910
0.910
0.910
0.910
0.950
0.492
0.492
0.492
0.492
0.492
0.511
0.511
0.511
0.669
0.669
0.669
0.669
0.669
0.669
0.669
0.669
0.275
0.157
0.669
0.669
0.669
0.669
0.669
0.669
0.669
0.669
0.669
0.669
0.826
0.826
0.826
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
0.984
------------0.275
0.275
0.157
0.669
-0.275
0.275
-0.181
-0.181
-0.181
0.275
---------0.393
0.236
0.216
0.393
0.314
-0.275
-0.275
-0.275
--
0.669
0.886
0.724"
0.709
0.709
0.885
0.885
0.710
1.102
0.708
1.165
0.752
0.905
0.512
0.752
0.157
0.440
1.116
0.905
0.900
1.102
1.102
1.102
1.102
1.102
1.102
0.430
0.552
1.220
1.220
1.220
0.984
0.692
1.063
0.984
2.169
0.984
0.984
0.984
0.992
0.905
1.377
1.377
1.377
1.377
1.377
1.377
0.905
0.87
1.102
0.921
0.91
0.91
1.10
1.10
0.90
1.378
0.984
1.165
0.752
1.142
0.752
0.752
1.550
0.64
1.44
1.14
1.14
1.37
1.37
1.37
1.37
1.37
1.37
0.64
0.75
1.57
1.57
1.57
2.756
0.992
2.835
1.339
2.484
1.339
1.339
1.339
0.992
1.220
1.77
1.77
1.77
1.77
1.77
1.77
1.220
45
60
75
45
60
45
60
90
45
90
90
45
75
45
45
45
45
45
75
75
45
45
60
60
90
90
45
45
45
60
90
45
45
60
75
45
75
75
75
45
90
45
45
60
60
90
90
90
0.12
0.20
0.20
0.19
0.19
0.19
0.19
0.19
0.20
0.20
0.20
0.20
0.28
0.12
0.12
0.19
0.12
0.23
0.27
0.16
0.23
0.23
0.23
0.23
0.23
0.23
0.12
0.24
0.31
0.31
0.31
1.38
0.20
1.38
0.28
1.14
0.28
0.28
0.28
0.20
0.20
0.39
0.39
0.39
0.39
0.39
0.39
0.20
M12P1.75
M12P1.75
M12P1.75
M12P1.75
M12P1.75
M12P1.75
M12P1.75
M12P1.75
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M16P2
M20P2.5
M20P2.5
M20P2.5
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
M24P3
Note: * or “H” suffix denote retention studs supplied with a coolant hole.
“B” suffix denotes balanceable toolholder retention studs.
164
O-RING
--------------PS-51
---P9
-----------------P21
P9 / P21
----------
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
ACCESSORIES
165
TOOLJAW® — The Toolholder Clamp Champ
Lyndex-Nikken ToolJaws are machinists’
favorite tooling setup fixtures because they
are so handy and practical. Load a toolholder
into a ToolJaw. You’ll gain immediate access
to both the working end, and the taper end
and your toolholder will be secured by a
vise-tight grip.
Easy to use, just place or mount your ToolJaw
in a convenient spot and slip a holder into its
cradle. Raise the flange lock and secure it
with an easy-to-grip thumb screw.
RETENTION STUDS
ACCESSORIES
TECHNICAL SECTION
ACCESSORIES
ToolJaw provides maximum toolholder
accessibility with minimum handling. Less
handling means fewer chances of costly
toolholders being dropped or damaged.
Save the time and the hassles of using yesterday’s toolholder loading and unloading
techniques, and save the money you would
spend on replacing damaged toolholders.
166
TOOLJAW® CLAMPS
Part Number
B30-TOOLJAW
B35-TOOLJAW
B40-TOOLJAW
B45-TOOLJAW
B50-TOOLJAW
C30-TOOLJAW
C40-TOOLJAW
C45-TOOLJAW
C50-TOOLJAW
HSK40A-TOOLJAW
HSK63A-TOOLJAW
HSK100A-TOOLJAW
Description
BT 30-Taper TOOLJAW
BT 35-Taper TOOLJAW
BT 40-Taper TOOLJAW
BT 45-Taper TOOLJAW
BT 50-Taper TOOLJAW
CT 30-Taper TOOLJAW
CT 40-Taper TOOLJAW
CT 45-Taper TOOLJAW
CT 50-Taper TOOLJAW
HSK40A TOOLJAW
HSK63A TOOLJAW
HSK100A TOOLJAW
Features
• Access both ends of your toolholders
simultaneously.
• Minimize toolholder handling.
• Speed up your setup.
• Proven performance in the world’s
top shops.
• Convenient and practical.
• Easy to use.
Part Number
Description
B30-KEY
B35-KEY
B40-KEY
B45-KEY
B50-KEY
C30-KEY
C40-KEY
C45-KEY
C50-KEY
HSK40A-KEY
HSK63A-KEY
HSK100A-KEY
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
for
for
for
for
for
for
for
for
for
for
for
for
BT30 Tooljaw
BT35 Tooljaw
BT40 Tooljaw
BT45 Tooljaw
BT50 Tooljaw
CT30 Tooljaw
CT40 Tooljaw
CT45 Tooljaw
CT50 Tooljaw
HSK40A Tooljaw
HSK63A Tooljaw
HSK100A Tooljaw
RETENTION STUDS
TOOLJAW® REPLACEMENT KEYS
ACCESSORIES
Description
B30-JAW
B35-JAW
B40-JAW
B45-JAW
B50-JAW
C30-JAW
C40-JAW
C45-JAW
C50-JAW
HSK40A-JAW
HSK63A-JAW
HSK100A-JAW
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Replacement
Jaw
Jaw
Jaw
Jaw
Jaw
Jaw
Jaw
Jaw
Jaw
Jaw
Jaw
Jaw
for
for
for
for
for
for
for
for
for
for
for
for
BT30 Tooljaw
BT35 Tooljaw
BT40 Tooljaw
BT45 Tooljaw
BT50 Tooljaw
CT30 Tooljaw
CT40 Tooljaw
CT45 Tooljaw
CT50 Tooljaw
HSK40A Tooljaw
HSK63A Tooljaw
HSK100A Tooljaw
TECHNICAL SECTION
Part Number
ACCESSORIES
TOOLJAW® REPLACEMENT JAWS
STANDARD TIGHTENING FIXTURES
Part Number
Taper
30-LCFX
35-LCFX
40-LCFX
45-LCFX
50-LCFX
30
35
40
45
50
L
3.54”
3.61”
4.27”
5.31”
6.20”
D
2.17”
2.36”
2.76”
2.95”
3.94”
167
PointFinder™ • Lyndex-Nikken Item No. PF-2
Locate the precise relative positioning of the workpiece to the spindle
– measuring directly from the spindle itself.
RETENTION STUDS
ACCESSORIES
ACCESSORIES
.•
Advanced conductive detection system
Instant LED response
Direct action–no relays
Works with all metals
Unaffected by cutting oil
TECHNICAL SECTION
•
Precise
Position detection accuracy: +/- 0.0008”
Stylus recovery accuracy:
+/- 0.00004”
Stylus to shank concentricity: +/- 0.0008”
•
Overrun protected
X-axis and Y-axis:
Z-axis:
•
0.400”
0.200”
Simply load it into a toolholder and mount it into the machine’s
spindle. Gauge length pre-setting is unnecessary for X- or Y-axis
coordinate determination. Move PointFinder slowly along either
the X- or Y-axis toward the workpiece. Its bright LED flashes at
the exact point where its 1/4” diameter probe touches the workpiece’s surface. That point is exactly 1/8” away from spindle center.
Z-axis coordinate determination requires pre-setting, and the point
of probe contact marks the exact Z-axis coordinate.
With the workpiece locked into position, your other measurements are performed with the same ease and speed.
Versatile design
Convenient 1” straight shank configuration
Projects 4.40” from holder when fully loaded
•
PointFinder™ is an all-in-one replacement for primary axis setters, calipers, and depth and centering gauges. Not only is it
quick and easy to use, it’s accuracy is beyond compare.
Hardened, precision ground
steel construction
Features
• Position your workpiece without primary axis setters.
• Measure without calipers.
• Set depths, find centers without gauges.
• Fast, easy and accurate.
• Turn expensive setup time into profit-making production time.
168
ACCESSORIES
XYZSETTER™
Easy, accurate setting of any axis.
Description
XYZ–A
XYZ–B
Front Reading XYZSetter™
Side Reading XYZSetter™
Zero the dial with
the master cap
held in place.
Remove the master cap and position the
XYZSetter™ on your workpiece. Adjust your
spindle until the cutter (or a test bar) touches
the unit’s measuring face. Your absolute reference point is established when the unit’s dial
rests at zero.
ACCESSORIES
Part Number
RETENTION STUDS
XYZSetters minimize your setup time to maximize your
production time. These unique instruments allow you to
precisely establish all primary references quickly and dependably.
Two models are available for either front or side reading.
Both models are precision made of ground, hardened tool steel.
Both have dial indicators graduated in thousandths (0.001”).
ZeroSetter™
TECHNICAL SECTION
Quick, simple, precise Z-axis off-setting.
ZeroSetter assures fast reliable results every time you off-set your Zaxis. Your setup time will be reduced, so you’ll gain valuable production time. Made of hardened tool steel, each setter is meticulously
ground for top precision. ZeroSetter establishes an absolute gauge
length of 4"or 6” that serves as your primary reference point. Its dial
indicator is graduated in thousandths (0.001”).
Part Number
ZERO-SET4
HP-4
HP-6
Description
4” Gauge Length ZeroSetter
4” Gauge Length Height Presetter
6” Gauge Length Height Presetter
HP-4
HP-6
169
ACCESSORIES
FlashPoint™• Lyndex-Nikken Item No. FP – 1
Axis setter for steel workpieces.
FlashPoint and FlashPoint II are fast, easy to use, and boast unparalleled accuracy and repeatability.
They are ideal setup tools for CNC machining centers and lathes because exact setup points become easily
visible from the machine's control panel.
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
•
Advanced conductive
detection system
Instant LED response
Works with ferrous metals only
•
Precise
Height:
Parallelism:
Repeatability:
CNC X- and Y-axis setting in a flash
Setting an X-axis or Y-axis for a steel workpiece is as
simple as setting a Z-axis because both FlashPoint
models are magnetic. Place one on the side of your
workpiece and draw it toward your loaded cutting
tool. LED activation indicates a 2” distance plus the
radius of your cutting tool away from spindle center.
Simply reset your X or Y values to match.
CNC Z-axis setting in a flash
Using FlashPoint: Set a Z-axis by positioning either
FlashPoint model on the workpiece below your
loaded spindle.
2” +/– 0.0001”
within 0.0002”
within 0.0002”
•
Magnetic
Direct X-, Y-, and Z-axis
setting for all ferrous metals
•
Overrun protection
3/16”
•
Compact design
•
Hardened and precision
ground steel construction:
built to last
Lower the spindle until the mounted cutting tool contacts the unit (its bright LED light indicates contact).
Back off the spindle to the point where light is no
longer lit. This point is precisely 2” away from your
workpiece. Reset your Z-axis value to match.
Using FlashPoint II: Lower the spindle until the mounted cutting tool depresses the unit's face enough to
activate its LED light. This point is precisely 2” away
from your workpiece. Reset your Z-axis value to match.
FlashPoint II™• Lyndex-Nikken Item No. FP – 2
Axis setter for steel workpieces & Z-axis setter for non-ferrous workpieces.
•
Advanced micro-switch
detection system
LED responds at 2" from
workpiece plane
Works with all workpiece material
•
Precise
Height:
Parallelism:
Repeatability:
170
2” +/– 0.0001”
within 0.0001”
within 0.0001”
•
Magnetic base
Direct X-, Y-, and Z-axis
setting for all ferrous and non
ferrous materials
•
Overrun protection
1/16”
•
Compact design
•
Hardened and precision
ground steel construction
with scratch-proof
ceramic face
ACCESSORIES
FOR MORSE TAPER HOLDERS
Part Number
W1
W2
W3
W4
W5
Description
Morse Taper #1 Spindle Clean (with cleaning blades)
RETENTION STUDS
30-Taper Spindle Clean equipped with cleaning blades
W30 Standard cleaning blade set
W30 Varnish removing blade set
W30 Polishing blade set
Spindle Wipes
These handy wipers quick-clean your
spindles, assuring that your toolholder
tapers make continuous positive
contact with them for repeatable
on-center performance. They're also
perfect for cleaning the bores of your
collet chucks and Morse Taper holders.
ACCESSORIES
W30
30–ST
30–VR
30–EP
W35
35–ST
35–VR
35–EP
W40
40–ST
40–VR
40–EP
W45
45–ST
45–VR
45–EP
W50
50–ST
50–VR
50–EP
Description
TECHNICAL SECTION
Part Number
FOR MACHINE SPINDLES
FOR ER AND TG COLLET CHUCKS
Part Number
W16
W20
W25
W32
W75
W100
W150
Description
ER16 Collet Chuck Spindle Clean (with cleaning blades)
75TG Collet Chuck Spindle Clean (with cleaning blades)
FOR R8 SPINDLES
Part Number
WR8
Description
R8 Taper Spindle Clean (with cleaning blades)
171
Tool Wagon
Our tool wagon holds up to 100 toolholders depending
on taper size. It has a removable tray which allows for
reconfiguration to accommodate varying tapers. Tooling
pots are constructed of a rugged plastic which protects
the toolholder taper. The wagon is built with heavy
gauge steel construction and has 5” diameter casters.
Second Tool shelf, Tool box and Tightening fixture
shown in the photo on the right are sold separately.
Dimensions are approximately 36”H by 36”W by 20” D
Assembly is required.
ACCESSORIES
RETENTION STUDS
ACCESSORIES
TECHNICAL SECTION
TOOL WAGON
Part Number
30-TW
40-TW
50-TW
HSK63-TW
HSK100-TW
Description
Tool
Tool
Tool
Tool
Tool
Wagon
Wagon
Wagon
Wagon
Wagon
complete
complete
complete
complete
complete
with
with
with
with
with
top
top
top
top
top
shelf
shelf
shelf
shelf
shelf
to
to
to
to
to
hold
hold
hold
hold
hold
50
50
32
50
32
30-taper tools
40-taper tools
50-taper tools
HSK63 tools
HSK100 tools
TOOL WAGON TRAYS AND POTS
Part Number
TW-30
TW-40
TW-50
TW-HSK63
TW-HSK100
TW-30DA
TW-40DA
TW-50DA
TW-HSK63DA
TW-HSK100DA
TW-TS
172
Description
Optional 30 Taper 2nd Shelf - Holds 50 tools
Optional HSK63 Taper 2nd Shelf - Holds 50 tools
Optional HSK100 Taper 2nd Shelf - Holds 32 tools
Optional Double Angle 30 Taper 2nd Shelf - Holds 57 tools
Optional Double Angle HSK63 Taper 2nd Shelf - Holds 57 tools
Optional Double Angle HSK100 Taper 2nd Shelf - Holds 30 tools
Option Flat Top Shelf
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
TECHNICAL SECTION
173
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
TECHNICAL SECTION
174
Lyndex-Nikken Product Warranty
Standard Product
Additional Provisions
Lyndex-Nikken Inc., the seller, warrants to the user,
who purchases and uses (the “User”) the Standard
Product, as hereinafter defined against defects in
materials and workmanship for one year from the date
of delivery of the Standard Product to the User.
• Any attempts to repair, disassemble, modify, alter
or otherwise change the Product voids this Warranty.
• It is the User’s responsibility to see that the Product
is suitable for the User’s applications of the Product.
A “Standard Product” is defined as a product sold by
Lyndex-Nikken which is not:
• Common wear parts such as bearings, seals & rotary
unions (and the like), which are subject to wear and
tear, are not included in this Warranty.
• A Lyndex-Nikken Tool Presetter and/or Custom Tool
line Product, which is separately warranted. (Please
see the separate warranty information included with
each of these respective products).
• To use the Products and avoid injury to persons or
property, the User acknowledges that it is the User’s
sole responsibility to confirm that the supplied retention
knobs are correct for the machine tool and taper type.
• Special Tooling manufactured by Lyndex-Nikken at
the User’s request and to the User’s specifications
and/or plans, which shall have been approved by
User, or,
• The User agrees to indemnify and hold harmless
Lyndex-Nikken, including reasonable attorneys’ fees
it might incur, for any claims arising out of an incorrect fit of the retention knobs.
• Modified Standard Product, which is modified by
Lyndex-Nikken at the User’s request and to User’s
specifications and/or plans, which shall have been
approved by User.
• Our obligation under this warranty is to the
initial User only.
• This Warranty may not be assigned without the
express written approval of Lyndex.
From time to time in this Warranty, the Standard
Product, Special Tooling or Modified Standard
Product may be collectively referred to as the
“Product.”
• This Warranty is limited exclusively to the repair or
replacement of parts found defective by Lyndex’
Service Department.
Special Tooling or Modified Product
If the User first provides Lyndex-Nikken with all the
required manufacturing specifications, then LyndexNikken warrants that the Special Tooling and/or
Modified Standard Product (1) will be manufactured to
the User’s specifications and (2) shall be free from
defects in materials and workmanship for one year
from the date of delivery of the product to the User,
but Lyndex is not warranting that the Special Tooling
and/or Modified Standard Product can perform the
task anticipated by the User’s specifications.
• This Warranty provides for no credit or cash refund
to the User.
• This Warranty is subject to change without notice,
provided however, even though Lyndex shall not be
required to give notice of a change in its Warranty,
Lyndex will make a reasonable effort to notify customers and Distributors, who shall be obligated to
notify its customers, of any substantive changes in
the Warranty by either written notice to the customer, written notice to its Distributors, notice when
an order is placed, or by including a copy of a
changed Warranty in the product’s package.
All other warranties, express or implied, are excluded.
Max
Capacity
TIR
TIR
Location
Rough
HSS
Finish
HSS
Milling
Rough
Indexable
Rough
Carbide
Finish
Carbide
Drilling Reaming
Bullseye
1.00"
0.0000" 4 x D
VC Chuck
.500"
0.0001" 4 x D
MMC - Insider
.500"
0.0001" 4 x D
Milling Chuck
1.25"
0.0002" 4" from Nose SK - LSK
1.00"
0.0002" 4 x D
Shrink-Fit
2.00"
0.0002" 4 x D
ER Chuck
1.338"
0.0004" 4 x D
TG Chuck
1.50"
0.0005" 4 x D
DA Chuck
.750"
0.0008" 4 x D
End-Mill Holder
2.50"
0.0005" Nose
Shell-Mill Holder
2.00"
0.0002" Arbor
Face-Mill Holder
2.50"
0.0002" Arbor
Stub-Mill Holder
1.50"
0.0002" Holder Arbor
Integral Drill Chuck
.500"
Jacobs Drill Chuck
.750"
Morse Taper Chuck
MT#5
= Excellent
TECHNICAL SECTION
= Good
RETENTION STUDS
Toolholder Type
ACCESSORIES
APPLICATION GUIDE
TECHNICAL SECTION
175
Taper Specifications
CAT 40
BT 30
CAT 50
BT 40
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
TECHNICAL SECTION
BT 50
176
Taper Specifications
HSK40E
HSK63A
HSK63F
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
HSK40A
TECHNICAL SECTION
HSK100A
177
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
TECHNICAL SECTION
178
TIGHTENING TORQUE FOR
COLLET CHUCKS
TIGHTENING TORQUE FOR
END MILL HOLDER SET SCREWS
I.D.
Set Screw Size
1/8”
3/16”
1/4”
5/16”
3/8”
7/16”
1/2”
5/8”
3/4”
7/8”
1”
1-1/4”
1-1/2”
2”
2-1/2”
6.00mm
8.00mm
10.00mm
12.00mm
14.00mm
16.00mm
18.00mm
20.00mm
25.00mm
32.00mm
40.00mm
42.00mm
6-32 x 1/4
8-32 x 1/4
1/4-28 x 1/4
5/16-24 x 1/4
3/8-24 x 5/16
3/8-24 x 5/16
7/16-20 x 3/8
9/16-18 x 1/2
5/8-18 x 1/2
5/8-18 x 1/2
3/4-16 x 11/16
3/4-16 x 11/16
3/4-16 x 11/16
1-14 x 7/8
1-14 x 7/8
1/4-28 x 1/4
5/16-24 x 1/4
3/8-24 x 5/16
7/16-20 x 3/8
9/16-18 x 1/2
9/16-18 x 1/2
5/8-18 x 1/2
5/8-18 x 1/2
3/4-16 x 11/16
3/4-16 x 11/16
3/4-16 x 11/16
3/4-16 x 11/16
Tightening Torque Hex Wrench Size
0.6 ft/lbs
0.8 ft/lbs
6.5 ft/lbs
14 ft/lbs
16 ft/lbs
16 ft/lbs
24 ft/lbs
36 ft/lbs
36 ft/lbs
76 ft/lbs
150 fl/lbs
150 fl/lbs
150 fl/lbs
270 ft/lbs
270 ft/lbs
6.5 ft/lbs
14 ft/lbs
16 ft/lbs
24 ft/lbs
36 ft/lbs
36 ft/lbs
36 ft/lbs
36 ft/lbs
150 fl/lbs
150 fl/lbs
150 fl/lbs
150 fl/lbs
1/16
5/64
1/8
5/32
3/16
3/16
7/32
9/32
5/16
5/16
3/8
3/8
3/8
9/16
9/16
1/8
5/32
3/16
7/32
9/32
9/32
5/16
5/16
3/8
3/8
3/8
3/8
Collet Type
SK
ER
TG
DA
Collet Size
SK06
SK10
SK16
SK25
ER8
ER11
ER16
ER20
ER25
ER32
ER40
ER50
TG25
TG50
TG75
TG100
TG150
300DA
200DA
100DA
180DA
Nut Tightening Torque
22-29 ft/lbs*
33-34 ft/lbs
55-62 ft/lbs
66-73 ft/lbs
4 ft/lbs
18 ft/lbs
40 ft/lbs
60 ft/lbs
75 ft/lbs
100 ft/lbs
125 ft/lbs
175 ft/lbs
20 ft/lbs
35 ft/lbs
55 ft/lbs
75 ft/lbs
100 ft/lbs
18 ft/lbs
25 ft/lbs
35 ft/lbs
40 ft/lbs
*Note: 14 ft/lbs for ø ≤ 3mm on SK06 Collet Chucks.
#0 - #6
#8
#10
#12
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
JIS Metric
M1.6 - M3.5
M4
M5
M6
M7, M8
M10
M12
M14
M16
M18
M20
M22
M24
M25
M27
M30
M33
Shank Dia.
inch
mm
0.141
0.168
0.194
0.220
0.225
0.318
0.381
0.323
0.367
0.429
0.480
0.451
0.590
0.652
0.697
0.760
0.800
0.896
0.896
1.021
1.021
1.108
1.108
Square Dia.
inch
mm
3.6
4.3
4.9
5.6
5.7
8.1
9.7
8.2
9.3
10.9
12.2
11.5
15.0
16.6
17.7
19.3
20.3
22.8
22.8
25.9
25.9
28.1
28.1
0.110
0.131
0.152
0.165
0.191
0.238
0.286
0.242
0.275
0.322
0.360
0.406
0.442
0.489
0.523
0.570
0.600
0.672
0.672
0.766
0.766
0.831
0.831
2.8
3.3
3.9
4.2
4.9
6.0
7.3
6.1
7.0
8.2
9.1
10.3
11.2
12.4
13.3
14.5
15.2
17.1
17.1
19.5
19.5
21.1
21.1
DIN 371 TAPS
US Metric
M1 - M1.8
M2 - M2.5
M3
M3.5
M4
M5, M6
M8
M10
Shank Dia.
inch
mm
0.098
0.110
0.138
0.157
0.177
0.236
0.315
0.394
2.5
2.8
3.5
4.0
4.5
6.0
8.0
10.0
Square Dia.
inch
mm
0.083
0.083
0.106
0.118
0.134
0.193
0.244
0.315
2.1
2.1
2.7
3.0
3.4
4.9
6.2
8.0
Shank Dia.
inch
mm
JIS Metric
M4
M5
M6
M7, M8
M9, M10
M11
M12
M14, M15
M16
M17
M18
M20
M22
M25
M26, M27
M28
M30
M32
M33
M34, M35
M36, M38
M39, M40
M42
0.197
0.217
0.236
0.244
0.276
0.315
0.335
0.413
0.492
0.512
0.551
0.591
0.669
0.748
0.787
0.827
0.906
0.945
0.984
1.024
1.102
1.181
1.260
5.0
5.5
6.0
6.2
7.0
8.0
8.5
10.5
12.5
13.0
14.0
15.0
17.0
19.0
20.0
21.0
23.0
24.0
25.0
26.0
28.0
30.0
32.0
Square Dia.
inch
mm
0.157
0.177
0.177
0.197
0.217
0.236
0.256
0.315
0.394
0.394
0.433
0.472
0.512
0.591
0.591
0.669
0.669
0.748
0.748
0.827
0.827
0.906
1.024
4.0
4.5
4.5
5.0
5.5
6.0
6.5
8.0
10.0
10.0
11.0
12.0
13.0
15.0
15.0
17.0
17.0
19.0
19.0
21.0
21.0
23.0
26.0
DIN 376 TAPS
US Metric
M8
M10
M12
M14
M16
M18
M20
M22, M24
M27
M30
M33
M36
M39, M42
M45, M48
M52
Shank Dia.
inch
mm
0.236
0.276
0.354
0.433
0.472
0.551
0.630
0.709
0.787
0.866
0.984
1.102
1.260
1.417
1.575
6.0
7.0
9.0
11.0
12.0
14.0
16.0
18.0
20.0
22.0
25.0
28.0
32.0
36.0
40.0
RETENTION STUDS
U.S. Inch
JIS TAPS
ACCESSORIES
U.S. TAPS
TECHNICAL SECTION
Tap Dimensional Data
TECHNICAL SECTION
Square Dia.
inch
mm
0.193
0.217
0.276
0.354
0.354
0.433
0.472
0.571
0.630
0.709
0.787
0.866
0.945
1.142
1.260
4.9
5.5
7.0
9.0
9.0
11.0
12.0
14.5
16.0
18.0
20.0
22.0
24.0
29.0
32.0
179
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
TECHNICAL SECTION
Tap Collet Torque Specifications
PRESET TORQUE FOR TAP COLLETS - ANSI
Tap Shank x Square
141 x .110
3.581 x 2.794
.168 x .131
4.267 x 3.327
.194 x .152
4.927 x 3.860
.220 x .165
5.588 x 4.191
.255 x .191
6.477 x 4.851
.318 x .238
8.077 x 6.045
.381 x .286
9.677 x 7.264
.323 x .242
8.204 x 6.146
.367 x .275
9.321 x 6.985
3 x 2.5
4 x 3.2
5x4
5.5 x 4.5
6 x 4.5
6.2 x 5
7 x 5.5
8x6
8.5 x 6.5
9.5 x 7
10.5 x 8
12.5 x 10
13 x 10
14 x 11
180
Tap Size
Torque Setting ft./lbs.
Tap Shank x Square
Tap Size
Torque Setting ft./lbs.
#0-1
#2
#3
#4
#5
#6
#8
0.14
0.22
0.29
0.36
0.58
0.72
1.16
9/16”
28.93
5/8”
36.17
#10
2.2
#12
2.9
1/4”
4.34
5/16”
7.23
3/8”
11.58
.429 x .322
10.896 x 8.178
.480 x .360
12.192 x 9.144
.542 x .406
13.766 x 10.31
.590 x .442
14.986 x 11.23
.652 x .489
16.56 x 12.42
.697 x .523
17.703 x 13.28
.760 x .570
19.304 x 14.48
.800 x .600
20.32 x 15.24
.896 x .672
22.758 x 17.07
7/16”
15.91
1/2”
23.15
PRESET TORQUE FOR TAP COLLETS - JIS
Tap Shank x Square
PRESET TORQUE FOR TAP COLLETS - ANSI
Tap Size
M
M
M
M
M
M
M
M
M
M
M
M
M
M
2
3
4
5
6
8
10
11
12
13
14
16
17
18
Torque Setting Nm
0.6
1
2.3
3.6
5.9
11.8
21.6
25
31.4
39
46
51
67
80
11/16”
44
3/4”
50.63
13/16”
57.5
7/8”
72.33
15/16”
77.4
1”
101.26
1-1/8”
144.66
PRESET TORQUE FOR TAP COLLETS - JIS
Tap Shank x Square
15
17
19
20
21
23
24
25
26
28
x
x
x
x
x
x
x
x
x
x
12
13
15
15
17
17
19
19
21
21
Tap Size
M
M
M
M
M
M
M
M
M
M
20
22
24
27
28
30
32
33
34
36
Torque Setting Nm
88
98
132
157
175
225
235
245
265
304
2.24 x 1.8
2.5 x 2
2.8 x 2.24
3.15 x 2.5
3.55 x 2.8
4 x 3.15
4.5 x 3.55
5x4
5.6 x 4.5
6.3 x 5
7.1 x 5.6
8 x 6.3
Tap Size
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
3
2
3.5
2.2
2.5
3
4
3.5
4.5
4
5
4.5
6
5
7
6
8
7
10
8
10
11
Torque Setting Nm
0.5
0.3
0.8
0.35
0.4
0.5
1.2
0.8
1.6
1.2
2
1.6
4
2
6
4
8
6
16
8
16
18
PRESET TORQUE FOR TAP COLLETS - DIN
Tap Shank x Square
2.5 x 2.1
2.8 x 2.1
3.5 x 2.7
4x3
4.5 x 3.4
6 x 4.9
7 x 5.5
8 x 6.2
9x7
10 x 8
11 x 9
12 x 9
Tap Size
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
1.8
3
2
2.2
2.5
4
3
5
3.5
4
6
5
6
8
10
8
11
12
10
14
16
Torque Setting Nm
0.3
0.5
0.3
0.35
0.4
1.2
0.5
2
0.8
1.2
4
2
4
8
16
8
18
22
16
36
40
Tap Shank x Square
9 x 7.1
10 x 8
11.2 x 9
12.5 x 10
14 x 11.2
16 x 12.5
18 x 14
20 x 16
22.4 x 18
25 x 20
28 x 22.4
Tap Size
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
9
12
10
14
16
20
18
22
24
30
33
33
36
39
42
Torque Setting Nm
12
22
16
36
40
70
63
80
125
220
240
240
280
320
420
- Standard setting.
- Setting on request.
PRESET TORQUE FOR TAP COLLETS - DIN
Tap Shank x Square
14 x 11
16 x 12
18 x 14.5
20 x 16
22 x 18
25 x 20
28 x 22
Tap Size
M
M
M
M
M
M
M
M
M
M
16
18
20
22
24
27
30
33
36
36
Torque Setting Nm
RETENTION STUDS
Tap Shank x Square
PRESET TORQUE FOR TAP COLLETS - ISO
ACCESSORIES
PRESET TORQUE FOR TAP COLLETS - ISO
TECHNICAL SECTION
Tap Collet Torque Specifications
TECHNICAL SECTION
40
63
70
80
125
140
220
240
280
280
- Standard setting.
- Setting on request.
181
TECHNICAL SECTION
ACCESSORIES
RETENTION STUDS
TECHNICAL SECTION
3Lock Technical Information
Please make sure that the suitable spacer is fitted on the machine spindle flange when the 3lock tooling is used
on the standard BT/IT/CAT spindle machine. Please do not use 3lock tooling on the standard machine without
the spacer.
Always ensure the swarf can't attach at the spindle flange surface of the double contact system. Generally the
inside of the machining envelope is always covered with swarf. This means that there is a possibility that the flange
of the tooling may collect swarf easily at the ATC. It is therefore important that the machine envelope is regularly cleaned (Clean the ATC arm, the route through which the tooling passes, the tool pot and the spindle surfaces
ect. ) at least every 3 months.
The fine swarf may contaminate the inside of a vacant pot within the ATC. If tool is randomly placed into ATC
please either make sure the tool holder is returned to original station or insert dummy tool into all vacant pots to
prevent swarf build up inside ATC station.
The taper connection of the tool shank with Rust Preventative Treatment (RPT) is more prone to sticking in the
spindle than a tool shank without the RPT treatment. Also the unclamping force for the tool with the RPT treatment must be 20% stronger than the unclamping force of the tool without RPT treatment. Please be careful to
check the unclamping force of your milling center when the tool with the RPT treatment is chosen.
As standard the taper cone of 3Lock Tool and NC5 tool is provided without the RPT treatment. When RPT treatment is required please add “TCRP” at end of part number.
Caution must be taken for center through tool coolant
applications. There are two methods to seal coolant at the
retention stud: Sealing the face contact and sealing of the
taper contact. Please choose the proper retention stud for
your milling center.
If your milling machine has center through coolant but
does not have the sealing at the retention stud, the
coolant may get inside the spindle and can be sealed by
a standard tool holder connection. However the 3Lock
tool can not seal the coolant at the taper connection
because of the slit within the taper of the 3Lock holder.
If the pulling force of the machine spindle decreases substantially, the Nikken 3Lock tooling cannot perform 100%
at its capability. We would recommend that regular
inspection of the pulling force is carried out to prevent any
reduction in the pulling force at an early stage.
182

Lyndex Std Catalog - Dyke House Company

Transcription

Similar documents

LYNDEX-NIKKEN SPRING SPECIAL 1547 Division Ave S

Lyndex Advan. Catalog

collet chucks

Technical - Lyndex

Nikken Rotary Tables for Fanuc Robodrill - Lyndex

nikken polygon c6 tool system

Machining Centre Vertical OMV Parpas HSC1700