LYNDEX-NIKKEN SPRING SPECIAL 1547 Division Ave S

LYNDEX-NIKKEN SPRING SPECIAL
1547 Division Ave S | Grand Rapids, MI 49507
800-968-8665 | Fax: 616-241-1811 | www.nemic.net
[email protected]
06.03.2014
Description
Part Number
BT30 JT1 Jacobs Taper Holder
BT30 JT3 Jacobs Taper Holder
BT30 Morse Taper MT2 Holder
BT30 25TG Collet Chuck
BT30 50TG Collet Chuck
BT35 Morse Taper MT1 Holder
BT35 1/4 End Mill Holder
BT35 5/16 End Mill Holder
BT35 3/8 End Mill Holder
BT35 7/16 End Mill Holder
BT35 180DA Collet Chuck
BT35 50TG Collet Chuck
BT35 75TG Collet Chuck
BT35 100TG Collet Chuck
BT35 50TG Collet Chuck
BT35 #1 Rigid Tap Holder
BT35 #1 Tension/compression Tap Holder
BT40 32mm Shell Mill Holder
BT40 JT2 Jacobs Taper Holder
BT40 JT6 Jacobs Taper Holder
BT40 JT33 Jacobs Taper Holder
BT40 Morse Taper MT2 Holder
BT40 Morse Taper MT4 Holder
BT40 1/2 End Mill Holder DIN
BT40 10mm End Mill Holder
BT40 16mm End Mill Holder
BT40 25TG Collet Chuck
BT40 300DA Collet Chuck
BT40 50TG Collet Chuck
BT40 150TG Collet Chuck
BT40 7/8 End Mill Holder
BT40 20mm End Mill Holder
BT40 ER8 Collet Chuck
BT40 100DA Collet Chuck
BT40 180DA Collet Chuck
BT40 25TG Collet Chuck
BT40 50TG Collet Chuck
BT40 #2 Rigid Tap Holder
BT40 #2 Rigid Tap Holder Coolant
BT40 1/8 End Mill Holder Stub Length
BT40 3/16 End Mill Holder Stub Length
BT40 3/8 End Mill Holder Stub Length
BT45 JT6 Jacobs Taper Holder
BT45 #1 Tension/compression Tap Holder
BT45 #2 Tension/compression Tap Holder
BT45 3/16 End Mill Holder
BT45 5/16 End Mill Holder
BT45 3/4 End Mill Holder
BT45 7/8 End Mill Holder
BT45 1in End Mill Holder
BT45 1.1/2 End Mill Holder
BT45 180DA Collet Chuck
BT50 1in StubMill Holder
BT50 JT6 Jacobs Taper Holder
BT50 Morse Taper MT5 Holder
BT50 150TG Collet Chuck
BT50 1in Shell Mill Holder
BT50 1.1/4 Shell Mill Holder
BT50 5/8 End Mill Holder
BT50 7/8 End Mill Holder
BT50 1.1/4 End Mill Holder Balanceable
BT50 180DA Collet Chuck
BT50 75TG Collet Chuck
BT40 1.1/2 End Mill Holder
CAT30 1in End Mill Holder
CAT40 #3 Tension/compression Tap Holder
CAT40 1/8 End Mill Holder DIN
CAT40 3/16 End Mill Holder DIN
CAT40 1/4 End Mill Holder DIN
CAT40 5/16 End Mill Holder DIN
CAT40 3/8 End Mill Holder DIN
CAT40 7/16 End Mill Holder DIN
B3003-0001
B3003-0003
B3004-0002
B3007-0250
B3017-0500
B3504-0001
B3506-0250
B3506-0312
B3506-0375
B3506-0437
B3507-0180
B3507-0500
B3507-0750
B3507-1000
B3517-0500
B35R5-0562
B35S5-0562
B4001-32
B4003-0002
B4003-0006
B4003-0033
B4004-0002
B4004-0004
B4006-0500DIN
B4006-10
B4006-16
B4007-0250
B4007-0300
B4007-0500
B4007-1500
B4016-0875
B4016-20
B4017-0008
B4017-0100
B4017-0180
B4017-0250
B4017-0500
B40R5-0875
B40R5-0875(C)
B40S6-0125
B40S6-0187
B40S6-0375
B4503-0006
B4505-0562
B4505-0875
B4506-0187
B4506-0312
B4506-0750
B4506-0875
B4506-1000
B4506-1500
B4507-0180
B5002-1000
B5003-0006
B5004-0005
B5007-1500
B5011-1000
B5011-1250
B5016-0625
B5016-0875
B5016-1250B
B5017-0180
B5017-0750
BT40-WE1.1/2-110
C3006-1000
C4005-1375
C4006-0125DIN
C4006-0187DIN
C4006-0250DIN
C4006-0312DIN
C4006-0375DIN
C4006-0437DIN
Page 1 of 12
List Price
192.50
192.50
162.00
205.00
255.00
172.50
177.50
186.50
177.50
186.50
213.00
327.00
242.00
242.00
361.00
458.00
457.00
161.00
131.00
131.00
131.00
143.00
143.00
140.00
130.00
142.00
282.00
185.00
282.00
265.00
159.00
144.00
257.00
218.50
218.50
307.00
295.00
459.00
702.00
250.00
141.00
141.00
218.00
566.50
647.00
236.50
236.50
285.50
285.50
285.50
285.50
262.00
395.00
189.00
367.00
295.00
335.00
345.00
245.00
293.50
370.50
312.00
295.00
231.00
148.50
560.00
163.00
183.50
165.00
163.00
165.00
171.00
PCat
Taper
Style
Size
G.L.
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
BT30
BT30
BT30
BT30
BT30
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT35
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT45
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT40
CAT30
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
JT
JT
MT
25TG
50TG
MT
EMH
EMH
EMH
EMH
180DA
50TG
75TG
100TG
50TG
TAP
TAP
SM
JT
JT
JT
MT
MT
EMH
EMH
EMH
25TG
300DA
50TG
150TG
EMH
EMH
ER8
100DA
180DA
25TG
50TG
TAP
TAP
EMH
EMH
EMH
JT
TAP
TAP
EMH
EMH
EMH
EMH
EMH
EMH
180DA
STUB
JT
MT
150TG
SM
SM
EMH
EMH
EMH
180DA
75TG
EMH
EMH
TAP
EMH
EMH
EMH
EMH
EMH
EMH
#1
#3
#2
1.06in
0.98in
2.36in
1.75in
4.00in
1.75in
2.38in
2.38in
2.38in
2.38in
4.00in
2.00in
2.50in
3.13in
4.00in
3.02in
2.48in
50mm
1.61in
1.61in
1.61in
2.36in
3.54in
2.50in
2.50in
2.50in
2.00in
3.00in
2.25in
5.50in
6.00in
4.00in
4.00in
6.00in
6.00in
4.00in
4.00in
3.66in
3.50in
1.38in
1.38in
1.38in
1.59in
4.92in
5.94in
3.00in
3.00in
3.00in
4.00in
4.00in
4.50in
4.00in
6.17in
1.61in
4.13in
4.00in
4.00in
4.00in
6.00in
6.00in
6.00in
6.00in
5.50in
110mm
4.25in
9.19in
2.36in
2.50in
2.50in
2.50in
2.50in
2.50in
#1
1/4in
5/16in
3/8in
7/16in
Sys 1
Sys 1
32MM
#2
#6
#33
#2
#4
1/2in
10MM
16MM
7/8in
20MM
Sys 2
Sys 2
1/8in
3/16in
3/8in
#6
Sys 1
Sys 2
3/16in
5/16in
3/4in
7/8in
1in
1.1/2in
1in
#6
#5
1in
1.1/4in
5/8in
7/8in
1.1/4in
1.1/2in
1in
Sys 3
1/8in
3/16in
1/4in
5/16in
3/8in
7/16in
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
CAT40 5/8 End Mill Holder DIN
CAT40 10mm End Mill Holder DIN
CAT40 12mm End Mill Holder DIN
CAT40 14mm End Mill Holder DIN
CAT40 18mm End Mill Holder DIN
CAT40 8mm End Mill Holder DIN
CAT40 25TG Collet Chuck
CAT40 150TG Collet Chuck DIN
CAT40 1/8 End Mill Holder DIN
CAT40 3/16 End Mill Holder DIN
CAT40 7/16 End Mill Holder DIN
CAT40 5/8 End Mill Holder Balanceable
CAT40 5/8 End Mill Holder DIN
CAT40 3/4 End Mill Holder DIN
CAT40 7/8 End Mill Holder
CAT40 7/8 End Mill Holder DIN
CAT40 1.1/2 End Mill Holder DIN
CAT40 #2 Rigid Tap Holder Coolant
CAT45 1in StubMill Holder
CAT45 JT33 Jacobs Taper Holder
CAT45 3/16 End Mill Holder
CAT45 3/8 End Mill Holder
CAT45 75TG Collet Chuck
CAT45 150TG Collet Chuck
CAT45 100TG Collet Chuck
CAT50 32mm Shell Mill Holder
CAT50 JT2 Jacobs Taper Holder
CAT50 JT33 Jacobs Taper Holder
CAT50 1/4 End Mill Holder DIN
CAT50 5/16 End Mill Holder DIN
CAT50 3/8 End Mill Holder Aerospace
CAT50 3/8 End Mill Holder DIN
CAT50 7/16 End Mill Holder DIN
CAT50 1/2 End Mill Holder Aerospace
CAT50 1/2 End Mill Holder DIN
CAT50 5/8 End Mill Holder DIN
CAT50 3/4 End Mill Holder DIN
CAT50 7/8 End Mill Holder Aerospace
CAT50 10mm End Mill Holder DIN
CAT50 12mm End Mill Holder DIN
CAT50 14mm End Mill Holder DIN
CAT50 18mm End Mill Holder DIN
CAT50 2.1/2 End Mill Holder DIN
CAT50 32mm End Mill Holder DIN
CAT50 42mm End Mill Holder
CAT50 42mm End Mill Holder DIN
CAT50 6mm End Mill Holder DIN
CAT50 8mm End Mill Holder DIN
CAT50 ER20 HiTorq Collet Chuck DIN
CAT50 ER25 HiTorq Collet Chuck DIN
CAT50 150TG Collet Chuck DIN
CAT50 2in Shell Mill Holder
CAT50 1/4 End Mill Holder DIN
CAT50 3/8 End Mill Holder Aerospace
CAT50 3/8 End Mill Holder DIN
CAT50 7/16 End Mill Holder DIN
CAT50 1/2 End Mill Holder Aerospace
CAT50 1/2 End Mill Holder DIN
CAT50 5/8 End Mill Holder Aerospace
CAT50 5/8 End Mill Holder DIN
CAT50 3/4 End Mill Holder Aerospace
CAT50 7/8 End Mill Holder Aerospace
CAT50 7/8 End Mill Holder DIN
CAT50 2in End Mill Holder Aerospace
CAT50 75TG Collet Chuck DIN
CAT50 100TG Collet Chuck DIN
CAT50 150TG Collet Chuck DIN
CAT50 1/4 End Mill Holder DIN
CAT50 3/8 End Mill Holder Aerospace
CAT50 3/8 End Mill Holder DIN
CAT50 7/16 End Mill Holder
CAT50 7/16 End Mill Holder DIN
CAT50 1/2 End Mill Holder Aerospace
CAT50 1/2 End Mill Holder DIN
C4006-0625DIN
C4006-10DIN
C4006-12DIN
C4006-14DIN
C4006-18DIN
C4006-8DIN
C4007-0250
C4007-1500DIN
C4016-0125DIN
C4016-0187DIN
C4016-0437DIN
C4016-0625B
C4016-0625DIN
C4016-0750DIN
C4016-0875
C4016-0875DIN
C4016-1500DIN
C40R5-0875(C)
C4502-1000
C4503-0033
C4506-0187
C4506-0375
C4507-0750
C4507-1500
C4517-1000
C5001-32
C5003-0002
C5003-0033
C5006-0250DIN
C5006-0312DIN
C5006-0375A
C5006-0375DIN
C5006-0437DIN
C5006-0500A
C5006-0500DIN
C5006-0625DIN
C5006-0750DIN
C5006-0875A
C5006-10DIN
C5006-12DIN
C5006-14DIN
C5006-18DIN
C5006-2500DIN
C5006-32DIN
C5006-42
C5006-42DIN
C5006-6DIN
C5006-8DIN
C5007-0020DIN
C5007-0025DIN
C5007-1500DIN
C5011-2000
C5016-0250DIN
C5016-0375A
C5016-0375DIN
C5016-0437DIN
C5016-0500A
C5016-0500DIN
C5016-0625A
C5016-0625DIN
C5016-0750A
C5016-0875A
C5016-0875DIN
C5016-2000A
C5017-0750DIN
C5017-1000DIN
C5017-1500DIN
C5026-0250DIN
C5026-0375A
C5026-0375DIN
C5026-0437
C5026-0437DIN
C5026-0500A
C5026-0500DIN
Page 2 of 12
178.50
165.00
165.00
165.00
165.00
165.00
247.50
398.00
170.00
178.50
178.50
192.50
178.50
178.50
164.00
209.00
238.50
654.00
405.00
218.00
187.50
187.50
228.00
268.00
223.50
209.00
178.00
178.00
237.50
237.50
220.00
224.00
224.00
220.00
224.00
237.50
224.00
250.00
218.50
218.50
218.50
218.50
432.50
259.00
269.00
259.00
218.50
218.50
290.00
290.00
308.50
415.00
234.50
338.00
234.50
234.50
338.00
234.50
338.00
234.50
355.00
355.00
322.00
415.00
265.00
248.00
369.00
258.00
326.00
268.00
218.00
288.00
326.00
282.00
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT45
CAT45
CAT45
CAT45
CAT45
CAT45
CAT45
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
EMH
EMH
EMH
EMH
EMH
EMH
25TG
150TG
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
TAP
STUB
JT
EMH
EMH
75TG
150TG
100TG
SM
JT
JT
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
ER20
ER25
150TG
SM
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
75TG
100TG
150TG
EMH
EMH
EMH
EMH
EMH
EMH
EMH
5/8in
10MM
12MM
14MM
18MM
8MM
1/8in
3/16in
7/16in
5/8in
5/8in
3/4in
7/8in
7/8in
1.1/2in
Sys 2
1in
#33
3/16in
3/8in
32MM
#2
#33
1/4in
5/16in
3/8in
3/8in
7/16in
1/2in
1/2in
5/8in
3/4in
7/8in
10MM
12MM
14MM
18MM
2.1/2in
32MM
42MM
42MM
6MM
8MM
2in
1/4in
3/8in
3/8in
7/16in
1/2in
1/2in
5/8in
5/8in
3/4in
7/8in
7/8in
2in
1/4in
3/8in
3/8in
7/16in
7/16in
1/2in
1/2in
3.00in
2.50in
2.50in
3.00in
3.00in
2.50in
2.25in
6.00in
4.00in
4.00in
4.00in
4.00in
4.00in
4.00in
6.00in
6.00in
6.00in
3.50in
6.17in
1.61in
2.50in
2.50in
3.50in
4.00in
5.50in
60mm
1.61im
1.58in
2.50in
2.50in
2.82in
2.50in
2.50in
2.73in
2.63in
3.00in
3.00in
3.75in
2.50in
2.63in
3.00in
3.00in
6.00in
4.00in
4.50in
4.50in
2.50in
2.50in
2.50in
2.50in
3.50in
4.00in
4.00in
4.69in
4.00in
4.00in
4.60in
4.00in
4.53in
4.00in
4.50in
4.50in
6.00in
8.00in
5.50in
5.50in
6.00in
6.00in
6.69in
6.00in
6.00in
6.00in
6.60in
6.00in
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
CAT50 3/4 End Mill Holder Aerospace
CAT50 7/8 End Mill Holder DIN
CAT50 1in End Mill Holder Aerospace
CAT50 1.1/4 End Mill Holder Aerospace
CAT50 7/8-20 Boring Head Holder
CAT50 #3 Rigid Tap Holder Coolant Modified
CAT50 3/8 End Mill Holder Stub Length
CAT50 7/8 End Mill Holder Stub Length
HSK100A Blank Bar x 13in
HSK100A Morse Taper MT1 Holder
HSK100A Morse Taper MT2 Holder
HSK100A Morse Taper MT4 Holder
HSK100A Morse Taper MT5 Holder
HSK100A #1 Rigid Tap Holder
HSK100A #1 Rigid Tap Holder Coolant
HSK100A #2 Rigid Tap Holder
HSK100A #2 Rigid Tap Holder Coolant
HSK100A #3 Rigid Tap Holder
HSK100A #3 Rigid Tap Holder Coolant
HSK100A 1.1/4 Shell Mill Holder
HSK100A 1.1/4 Shell Mill Holder
HSK100A #3 Tension/compression Tap Holder
HSK40A 1/2 End Mill Holder
HSK40A ER11 Collet Chuck
HSK40A 1/4 NPU Keyless Drill Chuck
HSK40A #1 Rigid Tap Holder
HSK40A #1 Rigid Tap Holder Coolant
HSK40A 3/4 Shell Mill Holder
HSK63A 5/16 End Mill Holder
HSK63A Blank Bar x 13in
HSK63A Morse Taper MT1 Holder
HSK63A Morse Taper MT2 Holder
HSK63A Morse Taper MT3 Holder
HSK63A Morse Taper MT4 Holder
HSK63A #2 Rigid Tap Holder
HSK63A #2 Rigid Tap Holder Coolant
HSK63A 1.1/4 Shell Mill Holder
HSK63A #1 Tension/compression Tap Holder Coolant
HSK63A #2 Tension/compression Tap Holder Coolant
HSK63A #3 Tension/compression Tap Holder
HSK63A #1 Tension/compression Tap Holder Coolant
Morse Taper MT2 1/8 End Mill Holder
Morse Taper MT2 3/16 End Mill Holder
Morse Taper MT2 1/4 End Mill Holder
Morse Taper MT2 5/16 End Mill Holder
Morse Taper MT3 1/4 End Mill Holder
Morse Taper MT3 5/16 End Mill Holder
Morse Taper MT3 3/8 End Mill Holder
Morse Taper MT4 3/8 End Mill Holder
NMTB30 1in Shell Mill Holder
NMTB30 Morse Taper MT1 Holder
NMTB30 1.1/4 End Mill Holder
NMTB30 300DA Collet Chuck
NMTB40 1.1/2 Stub Mill Holder
NMTB40 JT1 Jacobs Taper Holder
NMTB40 7/8 End Mill Holder
NMTB40 ER11 Collet Chuck
NMTB40 300DA Collet Chuck
NMTB40 1.1/2-18 Boring Head Holder
NMTB50 1.1/4 Stub Mill Holder
NMTB50 JT6 Jacobs Taper Holder
NMTB50 #2 Tension/compression Tap Holder
NMTB50 1/4 End Mill Holder
NMTB50 ER16 HiTorq Collet Chuck
NMTB50 150TG Collet Chuck
NMTB50 1/2 End Mill Holder
NMTB50 1.1/2 End Mill Holder
3/64 25TG Collet
1/16 25TG Collet
5/64 25TG Collet
3/32 25TG Collet
7/64 25TG Collet
9/64 25TG Collet
5/32 25TG Collet
C5026-0750A
C5026-0875DIN
C5026-1000A
C5026-1250A
C50BH-0875
C50R5-1375(C)
C50S6-0375
C50S6-0875
HSK100A-BLANK-13.00
HSK100A-MT001
HSK100A-MT002
HSK100A-MT004
HSK100A-MT005
HSK100A-R0562
HSK100A-R0562(C)
HSK100A-R0875
HSK100A-R0875(C)
HSK100A-R1375
HSK100A-R1375(C)
HSK100A-SM1250-4.00
HSK100A-SM1250-6.00
HSK100A-TC1375
HSK40A-0500-75
HSK40A-ER11-75
HSK40A-NPU8-114
HSK40A-R0562
HSK40A-R0562(C)
HSK40A-SM0750-60
HSK63A-0312-3.00
HSK63A-BLANK-13.00
HSK63A-MT001
HSK63A-MT002
HSK63A-MT003
HSK63A-MT004
HSK63A-R0875
HSK63A-R0875(C)
HSK63A-SM1250-5.00
HSK63A-TC0562(C)
HSK63A-TC0875(C)
HSK63A-TC1375
HSK63A-TC1375(C)
M0206-0125
M0206-0187
M0206-0250
M0206-0312
M0306-0250
M0306-0312
M0306-0375
M0406-0375
N3001-1000
N3004-0001
N3006-1250
N3007-0300
N4002-1500
N4003-0001
N4006-0875
N4007-0011
N4007-0300
N40BH-1500
N5002-1250
N5003-0006
N5005-0875
N5006-0250
N5007-0016
N5007-1500
N5016-0500
N5016-1500
025-003
025-004
025-005
025-006
025-007
025-009
025-010
Page 3 of 12
372.00
327.00
326.00
372.00
225.00
973.50
183.00
206.00
828.00
390.00
395.00
420.00
565.00
695.00
742.00
851.00
851.00
988.00
988.00
580.00
755.00
1,245.00
248.00
299.50
528.00
728.00
552.00
330.00
305.00
581.00
360.00
360.00
360.00
360.00
598.00
690.00
377.00
940.00
1,170.00
1,252.00
1,511.00
111.00
111.00
111.00
111.00
120.00
120.00
120.00
123.00
245.00
139.00
176.00
184.00
396.00
205.00
160.00
357.00
202.00
167.00
440.00
297.50
638.00
242.00
387.50
408.00
305.00
424.50
43.00
43.00
43.00
43.00
43.00
33.75
33.75
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK40A
HSK40A
HSK40A
HSK40A
HSK40A
HSK40A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
MT2
MT2
MT2
MT2
MT3
MT3
MT3
MT4
NMTB30
NMTB30
NMTB30
NMTB30
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB40
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
NMTB50
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
EMH
EMH
EMH
EMH
BH
TAP
EMH
EMH
BLANK
MT
MT
MT
MT
TAP
TAP
TAP
TAP
TAP
TAP
SM
SM
TAP
EMH
ER11
NPU8
TAP
TAP
SM
EMH
BLANK
MT
MT
MT
MT
TAP
TAP
SM
TAP
TAP
TAP
TAP
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
SM
MT
EMH
300DA
STUB
JT
EMH
ER11
300DA
BH
STUB
JT
TAP
EMH
ER16
150TG
EMH
EMH
25TG
25TG
25TG
25TG
25TG
25TG
25TG
3/4in
7/8in
1in
1.1/4in
7/8in
Sys 3
3/8in
7/8in
#1
#2
#4
#5
Sys 1
Sys 1
Sys 2
Sys 2
Sys 3
Sys 3
1.1/4in
1.1/4in
Sys 3
1/2in
Sys 1
Sys 1
3/4in
5/16in
#1
#2
#3
#4
Sys 2
Sys 2
1.1/4in
Sys 1
Sys 2
Sys 3
Sys 3
1/8in
3/16in
1/4in
5/16in
1/4in
5/16in
3/8in
3/8in
1in
#1
1.1/4in
1.1/2in
#1
7/8in
1.1/2in
1.1/4in
#6
Sys 2
1/4in
1/2in
1.1/2in
3/64in
1/16in
5/64in
3/32in
7/64in
9/64in
5/32in
6.50in
8.00in
6.50in
6.50in
1.75in
5.00in
1.38in
1.75in
13.0in
4.13in
4.75in
6.50in
7.69in
2.59in
3.09in
3.42in
3.94in
4.57in
5.32in
4.00in
6.0in
7.95in
75mm
75mm
114mm
3.15in
2.97in
60mm
3.00in
13.0in
4.13in
4.75in
5.91in
6.50in
3.31in
4.01in
5.00in
3.98in
6.38in
7.72in
9.41in
1.31in
1.00in
3.62in
2.50in
5.62in
0.69in
2.94in
2.00in
2.50in
1.75in
6.28in
1.34in
7.00in
2.75in
2.00in
5.00in
4.50in
6.00in
-
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
11/64 25TG Collet
13/64 25TG Collet
7/32 25TG Collet
15/64 25TG Collet
1/4 25TG Collet
1/8 75TG Collet Coolant Rubber
9/32 75TG Collet Coolant Rubber
11/32 75TG Collet Coolant Rubber
33/64 75TG Collet Coolant Rubber
9/16 75TG Collet Coolant Rubber
21/32 75TG Collet Coolant Rubber
11/16 75TG Collet Coolant Rubber
23/32 75TG Collet Coolant Rubber
11/32 100TG Collet Coolant Rubber
29/64 100TG Collet Coolant Rubber
17/32 100TG Sealed Coolant Collet
9/16 100TG Sealed Coolant Collet
37/64 100TG Collet Coolant Rubber
19/32 100TG Collet Coolant Rubber
39/64 100TG Collet Coolant Rubber
45/64 100TG Collet Coolant Rubber
23/32 100TG Collet Coolant Rubber
47/64 100TG Collet Coolant Rubber
49/64 100TG Collet Coolant Rubber
51/64 100TG Collet Coolant Rubber
13/16 100TG Collet Coolant Rubber
27/32 100TG Collet Coolant Rubber
55/64 100TG Collet Coolant Rubber
57/64 100TG Collet Coolant Rubber
59/64 100TG Collet Coolant Rubber
15/16 100TG Collet Coolant Rubber
31/32 100TG Collet Coolant Rubber
3mm 100TG Collet
4mm 100TG Collet
5mm 100TG Collet
5.5mm 100TG Collet
7mm 100TG Collet
7.75mm 100TG Collet
8mm 100TG Collet
11mm 100TG Collet
11.5mm 100TG Collet
13mm 100TG Collet
18mm 100TG Collet Coolant
19mm 100TG Collet
22mm 100TG Collet Coolant Rubber
24mm 100TG Collet
24mm 100TG Collet Coolant
24mm 100TG Collet Coolant Rubber
25mm 100TG Collet Coolant Rubber
26mm 100TG Collet
26mm 100TG Collet Coolant
26mm 100TG Collet Coolant Rubber
3/8NP 100TG Collet
1/2NP 100TG Collet
5/8NP 100TG Collet
3/4NP 100TG Collet
7/8NP 100TG Collet
12-13mm YCC13 Collet
1/2 150TG Collet
33/64 150TG Collet
17/32 150TG Collet
35/64 150TG Collet
9/16 150TG Collet
37/64 150TG Collet
19/32 150TG Collet
39/64 150TG Collet
5/8 150TG Collet
41/64 150TG Collet
21/32 150TG Collet
43/64 150TG Collet
11/16 150TG Collet
45/64 150TG Collet
23/32 150TG Collet
47/64 150TG Collet
025-011
025-013
025-014
025-015
025-016
075-008(S)
075-018(S)
075-022(S)
075-033(S)
075-036(S)
075-042(S)
075-044(S)
075-046(S)
100-022(S)
100-029(S)
100-034(S)
100-036(S)
100-037(S)
100-038(S)
100-039(S)
100-045(S)
100-046(S)
100-047(S)
100-049(S)
100-051(S)
100-052(S)
100-054(S)
100-055(S)
100-057(S)
100-059(S)
100-060(S)
100-062(S)
100-203
100-204
100-205
100-205.5
100-207
100-207.75
100-208
100-211
100-211.5
100-213
100-218(C)
100-219
100-222(S)
100-224
100-224(C)
100-224(S)
100-225(S)
100-226
100-226(C)
100-226(S)
100-324
100-332
100-340
100-348
100-356
13-13
150-032
150-033
150-034
150-035
150-036
150-037
150-038
150-039
150-040
150-041
150-042
150-043
150-044
150-045
150-046
150-047
33.75
33.75
37.00
37.00
33.75
39.50
39.50
39.50
39.50
39.50
39.50
39.50
39.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
42.50
38.00
38.00
38.00
38.00
38.00
38.00
38.00
38.00
38.00
38.00
89.25
38.00
42.50
41.00
89.25
42.50
42.50
41.00
89.25
42.50
51.00
51.00
51.00
51.00
51.00
90.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
58.00
Page 4 of 12
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
25TG
25TG
25TG
25TG
25TG
75TG
75TG
75TG
75TG
75TG
75TG
75TG
75TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
100TG
YCC13
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
11/64in
13/64in
7/32in
15/64in
1/4
1/8
9/32in
11/32in
33/64in
9/16in
21/32in
11/16in
23/32in
11/32in
29/64in
17/32in
9/16in
37/64in
19/32in
39/64in
45/64in
23/32in
47/64in
49/64in
51/64in
13/16in
27/32in
55/64in
57/64in
59/64in
15/16in
31/32in
3mm
4mm
5mm
5.5mm
7mm
7.75mm
8mm
11mm
11.5mm
13mm
18mm
19mm
22mm
24mm
24mm
24mm
25mm
26mm
26mm
26mm
3/8in
1/2in
5/8in
3/4in
7/8in
12-13MM
1/2in
33/64in
17/32in
34/64in
9/16in
37/64in
19/32in
39/64in
5/8in
41/64in
21/32in
43/64in
11/16in
45/64in
23/32in
47/64in
-
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
49/64 150TG Collet
25/32 150TG Collet
53/64 150TG Collet
27/32 150TG Collet
55/64 150TG Collet
57/64 150TG Collet
29/32 150TG Collet
59/64 150TG Collet
15/16 150TG Collet
61/64 150TG Collet
31/32 150TG Collet
63/64 150TG Collet
1in
150TG Collet
1.1/64 150TG Collet
1.1/32 150TG Collet
1.3/64 150TG Collet
1.1/16 150TG Collet
1.5/64 150TG Collet
1.3/32 150TG Collet
1.7/64 150TG Collet
1.1/8 150TG Collet
1-9/64 150TG Collet
1.5/32 150TG Collet
1.11/64 150TG Collet
1.3/16 150TG Collet
1.13/64 150TG Collet
1.7/32 150TG Collet
1.15/64 150TG Collet
1.17/64 150TG Collet
1-9/32 150TG Collet
1.19/64 150TG Collet
1.5/16 150TG Collet
1.21/64 150TG Collet
1.11/32 150TG Collet
1.23/64 150TG Collet
1.3/8 150TG Collet
1.25/64 150TG Collet
1.13/32 150TG Collet
1.27/64 150TG Collet
1.29/64 150TG Collet
1.15/32 150TG Collet
1.31/64 150TG Collet
1/2 NP 150TG Collet
5/8 NP 150TG Collet
1 NP 150TG collet
1.1/4NP 150TG Collet
Metal Rack 300DA-21 Cap
Insert Carbide (12pc Set)
Insert Carbide (12pc Set)
Insert Carbide (12pc Set)
Insert Carbide (12pc Set)
Kit Rack ER16
Kit Rack ER20
Kit Rack ER32
ER50 13.0mm (.511-.472) Collet
ER50 16.0mm (.629-.590) Collet
ER50 18.0mm (.708-.669) Collet
ER50 25.0mm (.984-.944) Collet
ER16 Tap Collet .220 x .165 #12,7/32
ER20 Tap Collet .220 x .165 #12,7/32
ER25 Tap Collet .220 x .165 #12,7/32
ER32 Tap Collet .220 x .165 #12,7/32
ER40 Tap Collet .255 x .191 1/4,M6,M6.5
ER40 Tap Collet .429 x .322 9/16,M14
Coolant
ER40 Tap Collet .760 x .570 15/16,M24
Coolant
HSK100A Tool Jaw
1in Straight Shank 75TG Collet Extension
16mm Straight Shank Double End w/Flat ER11 Mini-Nut
20mm Straight Shank Double End w/Flat ER11 Mini-Nut
20mm Straight Shank Double End w/Flat ER11 Mini-Nut
20mm Straight Shank Double End w/Flat ER16 Mini-Nut
25mm Straight Shank Double End w/Flat ER16 Mini-Nut
32mm Straight Shank Double End w/Flat ER20 Mini-Nut
5/8 Straight Shank Double End w/Flat ER8 Mini-Nut
150-049
150-050
150-053
150-054
150-055
150-057
150-058
150-059
150-060
150-061
150-062
150-063
150-064
150-065
150-066
150-067
150-068
150-069
150-070
150-071
150-072
150-073
150-074
150-075
150-076
150-077
150-078
150-079
150-081
150-082
150-083
150-084
150-085
150-086
150-087
150-088
150-089
150-090
150-091
150-093
150-094
150-095
150-332
150-340
150-364
150-380
300DA-RACK
C22GUX-NK1010
C22GUX-NK5050
C32GUX-NK1010
D43GUX-NK1010
E16-KITRACK
E20-KITRACK
E32-KITRACK
E50-511
E50-629
E50-708
E50-984
ET16-220
ET20-220
ET25-220
ET32-220
ET40-255
ET40-429(C)
ET40-760(C)
HSK100A-TOOLJAW
S1007-0750
SDF-0016-ER11-040M
SDF-0020-ER11-030M
SDF-0020-ER11-050M
SDF-0020-ER16-055M
SDF-0025-ER16-062M
SDF-0032-ER20-055M
SDF-0625-ER08-015M
Page 5 of 12
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
42.00
58.00
58.00
58.00
58.00
18.00
290.00
378.00
298.00
548.00
50.50
50.50
60.50
98.50
98.50
98.50
98.50
74.75
81.50
84.25
90.25
109.75
130.50
128.50
515.00
210.00
205.00
153.00
208.00
202.00
217.00
184.00
236.00
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
ACC
ACC
ACC
ACC
ACC
ACC
ACC
ACC
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
HSK100A
SS
SS
SS
SS
SS
SS
SS
SS
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
150TG
300DA
ACC
ACC
ACC
ACC
ACC
ACC
ACC
ER50
ER50
ER50
ER50
ER16
ER20
ER25
ER32
ER40
ER40
ER40
ACC
75TG
ER11
ER11
ER11
ER16
ER16
ER20
ER8
49/64in
25/32in
51/64in
27/32in
55/64in
57/64in
29/32in
59/64in
15/16in
61/64in
31/32in
63/64in
1in
1.1/64in
1.1/32in
1.3/64in
1.1/16in
1.5/64in
1.3/32in
1.7/64in
1.1/8in
1.9/64in
1.5/32in
1.11/64in
1.3/16in
1.13/64in
1.7/32in
1.15/64in
1.17/64in
1.9/32in
1.19/64in
1.5/16in
1.21/64in
1.11/32in
1.23/64in
1.3/8in
1.25/64in
1.13/32in
1.27/64in
1.29/64in
1.15/32in
1.31/64in
1/2in
5/8in
1in
1.1/4in
ER16
ER20
ER32
13MM
16MM
18MM
25MM
TAP
TAP
TAP
TAP
TAP
TAP
TAP
-
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
5/8 Straight Shank Double End w/Flat ER8 Mini-Nut
3/4 Straight Shank Double End w/Flat ER11 Mini-Nut
3/4 Straight Shank Double End w/Flat ER11 Mini-Nut
3/4 Straight Shank Double End w/Flat ER11 Mini-Nut
3/4 Straight Shank Double End w/Flat ER16 Mini-Nut
1in Straight Shank Double End w/Flat ER16 Mini-Nut
#1 PosiDrv Tap Collet .220 x .177 5.6x4.5 M5,M5.5 ISO
#1 PosiDrv Tap Collet .280 x .220 7.1X5.6 M7
ISO
#2 PosiDrv Tap Collet .413 x .315 10.5X8.0 M14,M15 JIS
#2 PosiDrv Tap Collet .512 x .394 13.0X10. M17
JIS
#2 PosiDrv Tap Collet .591 x .472 15.0X12. M20
JIS
#2 PosiDrv Tap Collet .110 x .083 2.8X2.1 M2,M2.5,M4 DIN
#2 PosiDrv Tap Collet .157 x .118 4.0X3.0 M3.5
DIN
#2 PosiDrv Tap Collet .280 x .220 7.1X5.6 M7
ISO
#2 PosiDrv Tap Collet .315 x .244 8.0X6.2 M8,M10 DIN
#2 PosiDrv Tap Collet .334 x .256 8.5X6.5 M12
JIS
#3 PosiDrv Tap Collet .472 x .354 12.0X9.0 M16
DIN
#3 PosiDrv Tap Collet .511 x .433 14.0X11. M18
JIS/DIN
#1 TorqCon Tap Collet .413 x .315 10.5X8.0 M14,M15
JIS
#1 TorqCon Tap Collet .157 x .126 4.0X3.2 M3
JIS
#1 TorqCon Tap Collet .197 x .177 5.5X4.5 M5,M5.5 JIS
#1 TorqCon Tap Collet .236 x .177 6.0X4.5 M6
JIS
#1 TorqCon Tap Collet .236 x .193 6.0X4.9 M5,M6,M8 DIN
#1 TorqCon Tap Collet .276 x .217 7.0X5.5 M10
JIS/DIN
#1 TorqCon Tap Collet .334 x .256 8.5X6.5 M12
JIS
#2 TorqCon Tap Collet .394 x .315 10.0X8.0 M10 ISO/DIN
#2 TorqCon Tap Collet .472 x .354 12.0X9.0 M16 DIN
#2 TorqCon Tap Collet .511 x .433 14.0X11. M18 JIS/DIN
#2 TorqCon Tap Collet .630 x .472 16.0X12. M20 DIN
#2 TorqCon Tap Collet .315 x .244 8.0X6.2 M8,M10 DIN
#2 TorqCon Tap Collet .334 x .256 8.5X6.5 M12
JIS
6mm Straight Shank Single End Round ER11 Mini-Nut
7mm Straight Shank Single End Round ER11 Mini-Nut
8mm Straight Shank Single End Round ER8 Mini-Nut
10mm Straight Shank Single End Round ER16 Mini-Nut
12mm Straight Shank Single End Round ER8 Mini-Nut
12mm Straight Shank Single End Round ER16 Mini-Nut
14mm Straight Shank Single End Round ER16 Mini-Nut
15mm Straight Shank Single End Round ER20 Mini-Nut
16mm Straight Shank Single End Round ER11 Mini-Nut
16mm Straight Shank Single End Round ER16 Mini-Nut
16mm Straight Shank Single End Round ER20 Mini-Nut
20mm Straight Shank Single End Round ER16 Mini-Nut
20mm Straight Shank Single End Round ER16 Mini-Nut
20mm Straight Shank Single End Round ER16 Mini-Nut
20mm Straight Shank Single End Round ER20 Mini-Nut
20mm Straight Shank Single End Round ER20 Mini-Nut
20mm Straight Shank Single End Round ER25 Mini-Nut
20mm Straight Shank Single End Round ER25 Mini-Nut
20mm Straight Shank Single End Round ER25 Mini-Nut
20mm Straight Shank Single End Round ER32
25mm Straight Shank Single End Round ER20 Mini-Nut
25mm Straight Shank Single End Round ER25 Mini-Nut
25mm Straight Shank Single End Round ER25 Mini-Nut
25mm Straight Shank Single End Round ER32
25mm Straight Shank Single End Round ER40
30mm Straight Shank Single End Round ER25
30mm Straight Shank Single End Round ER32
3/8 Straight Shank Single End Round ER8 Mini-Nut
1/2 Straight Shank Single End Round ER16 Mini-Nut
1/2 Straight Shank Single End Round ER20 Mini-Nut
5/8 Straight Shank Single End Round ER16
5/8 Straight Shank Single End Round ER20
3/4 Straight Shank Single End Round ER16
3/4 Straight Shank Single End Round ER25
3/4 Straight Shank Single End Round ER25 Mini-Nut
1in Straight Shank Single End Round ER25
1in Straight Shank Single End Round ER25
1.1/4 Straight Shank Single End Round ER32
16mm Straight Shank Single End w/Flat ER11 Mini-Nut
16mm Straight Shank Single End w/Flat ER11 Mini-Nut
16mm Straight Shank Single End w/Flat ER16 Mini-Nut
20mm Straight Shank Single End w/Flat ER16 Mini-Nut
20mm Straight Shank Single End w/Flat ER16 Mini-Nut
SDF-0625-ER8-025M
SDF-0750-ER11-040M
SDF-0750-ER11-070M
SDF-0750-ER11-090M
SDF-0750-ER16-055M
SDF-1000-ER16-030M
SE1-5.6X4.5
SE1-7.1X5.6
SE2-10.5X8.0
SE2-13.0X10.0
SE2-15.0X12.0
SE2-2.8X2.1
SE2-4.0X3.0
SE2-7.1X5.6
SE2-8.0X6.2
SE2-8.5X6.5
SE3-12.0X9.0
SE3-14.0X11.0
SES1-10.5X8.0
SES1-4.0X3.2
SES1-5.5X4.5
SES1-6.0X4.5
SES1-6.0X4.9
SES1-7.0X5.5
SES1-8.5X6.5
SES2-10.0X8.0
SES2-12.0X9.0
SES2-14.0X11.0(JIS)
SES2-16.0X12.0
SES2-8.0X6.2
SES2-8.5X6.5
SS-0006-ER11-045M
SS-0007-ER11-045M
SS-0008-ER08-080M
SS-0010-ER16-060M
SS-0012-ER08-080M
SS-0012-ER16-080M
SS-0014-ER16-060
SS-0015-ER20-100M
SS-0016-ER11-150M
SS-0016-ER16-060
SS-0016-ER20-100M
SS-0020-ER16-050
SS-0020-ER16-100
SS-0020-ER16-155M
SS-0020-ER20-030
SS-0020-ER20-060
SS-0020-ER25-050
SS-0020-ER25-100
SS-0020-ER32-050
SS-0020-ER32-100
SS-0025-ER20-155M
SS-0025-ER25-050
SS-0025-ER25-100
SS-0025-ER32-050
SS-0025-ER40-050
SS-0030-ER25-050
SS-0030-ER32-050
SS-0375-ER08-070M
SS-0500-ER16-100
SS-0500-ER20-100
SS-0625-ER16-060
SS-0625-ER20-100
SS-0750-ER16-050
SS-0750-ER25-050
SS-0750-ER25-100M
SS-1000-ER25-050
SS-1000-ER25-100
SS-1250-ER32-060
SSF-0016-ER11-038M
SSF-0016-ER11-140M
SSF-0016-ER16-035M
SSF-0020-ER16-120M
SSF-0020-ER16-140M
Page 6 of 12
245.00
202.00
208.00
211.00
169.00
211.00
34.75
34.75
55.00
55.00
55.00
55.00
55.00
55.00
55.00
55.00
123.00
123.00
80.00
80.00
80.00
80.00
80.00
80.00
80.00
116.75
116.75
116.75
116.75
116.75
116.75
117.00
107.00
114.00
126.00
120.00
123.00
147.00
169.00
132.00
114.00
144.00
107.00
117.00
159.00
120.00
132.00
117.00
147.00
132.00
150.00
172.00
129.00
135.00
120.00
181.00
172.00
184.00
123.00
114.00
162.00
138.00
126.00
120.00
162.00
169.00
117.00
132.00
162.00
141.00
150.00
141.00
175.00
178.00
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
SS
SS
SS
SS
SS
SS
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
ER8
ER11
ER11
ER11
ER16
ER16
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
TAP
ER11
ER11
ER8
ER16
ER8
ER16
ER16
ER20
ER11
ER16
ER20
ER16
ER16
ER16
ER20
ER20
ER25
ER25
ER32
ER32
ER20
ER25
ER25
ER32
ER40
ER25
ER32
ER8
ER16
ER20
ER16
ER20
ER16
ER25
ER25
ER25
ER25
ER32
ER11
ER11
ER16
ER16
ER16
Sys 1
Sys 1
Sys 2
Sys 2
Sys 2
Sys 2
Sys 2
Sys 2
Sys 2
Sys 2
Sys 3
Sys 3
Sys 1
Sys 1
Sys 1
Sys 1
Sys 1
Sys 1
Sys 1
Sys 2
Sys 2
Sys 2
Sys 2
Sys 2
Sys 2
-
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
22mm Straight Shank Single End w/Flat ER16 Mini-Nut
22mm Straight Shank Single End w/Flat ER16 Mini-Nut
22mm Straight Shank Single End w/Flat ER25 Mini-Nut
25mm Straight Shank Single End w/Flat ER25 Mini-Nut
25mm Straight Shank Single End w/Flat ER25 Mini-Nut
32mm Straight Shank Single End w/Flat ER25 Mini-Nut
40mm Straight Shank Single End w/Flat ER32
40mm Straight Shank Single End w/Flat ER40
5/8 Straight Shank Single End w/Flat ER8 Mini-Nut
3/4 Straight Shank Single End w/Flat ER11 Mini-Nut
3/4 Straight Shank Single End w/Flat ER16 Mini-Nut
Spindle Wipe 100TG
1.1/4 #2 Tension/compression Tap Holder Weldon Shank Coolant
Weldon 1.1/4 #2 Rigid Tap Holder Coolant
1.1/2 #2 Tension/compression Tap Holder Weldon Shank
Weldon 1.1/2 #3 Rigid Tap Holder
Spindle Wipe ER16
Spindle Wipe ER20
Weldon 25mm #1 Rigid Tap Holder Coolant
Spindle Wipe MT#3
Spindle Wipe 30 Taper
Spindle Wipe 35 Taper
Spindle Wipe 75TG
BT30 SK10 Slim Chuck
Max 15,000rpm
BT30 SK16 Slim Chuck
Max 15,000rpm
BT30 12mm Mini-Mini Chuck
BT30 4mm Mini-Mini Chuck
BT30 10mm Mini-Mini Chuck
BT30 VC13 Collet Chuck
BT30 VC13 Collet Chuck
BT40 12mm Mini-Mini Chuck Coolant
BT40 4mm PMH Micro Holder
BT40 SK10 Slim Chuck
Max 15,000rpm
BT40 SK16 Slim Chuck High Speed
Max 20,000rpm
BT40 SK16 Slim Chuck
Max 15,000rpm
BT40 VC13 Collet Chuck DIN
BT40 VC6 Collet Chuck
BT50 12mm Mini-Mini Chuck Coolant
BT50 12mm Mini-Mini Chuck Coolant
BT50 12mm Mini-Mini Chuck Coolant
BT50 4mm PMH Micro Holder
BT50 10mm Mini-Mini Chuck Coolant
BT50 SK10 Slim Chuck Max 15,000rpm
BT50 SK16 Slim Chuck Max 15,000rpm
BT50 SK6 Slim Chuck Max 15,000rpm
BT50 SK6 Slim Chuck Max 15,000rpm
BT50 VC13 Collet Chuck
BT50 VC13 Collet Chuck
BT50 VC13 Collet Chuck
BT50 VC6 Collet Chuck
BT50 VC6 Collet Chuck
BT50 VC6 Collet Chuck
CAT40 12mm Mini-Mini Chuck DIN
CAT40 10mm Mini-Mini Chuck Coolant Draw Type
CAT40 SK10 Slim Chuck DIN Max 15,000rpm
CAT40 SK16 Slim Chuck DIN Max 15,000rpm
CAT40 SK6 Slim Chuck DIN Max 15,000rpm
CAT40 VC6 Collet Chuck DIN
CAT50 12mm Mini-Mini Chuck
CAT50 12mm Mini-Mini Chuck Coolant
CAT50 10mm Mini-Mini Chuck Coolant
CAT50 SK6 Slim Chuck Max 15,000rpm
CAT50 VC13 Collet Chuck
CAT50 VC13 Collet Chuck
CAT50 VC6 Collet Chuck
CAT50 VC6 Collet Chuck
HSK40E VC13 Collet Chuck
HSK63F VC6 Collet Chuck
1.1/4 Straight Shank 10mm Mini-Mini Chuck Coolant
1.1/4 SK16 Slim Chuck Straight Shank
CAT40 32mm Pro-Endmill Base Holder
14mm Straight Collet
3/16 Straight Collet
5/16 Straight Collet
SSF-0022-ER16-038M
SSF-0022-ER16-070M
SSF-0022-ER25-070M
SSF-0025-ER16-065M
SSF-0025-ER25-145M
SSF-0032-ER25-070M
SSF-0040-ER32-080
SSF-0040-ER40-075
SSF-0625-ER08-043M
SSF-0750-ER11-115M
SSF-1000-ER16-033M
W100
W1205-0875(C)
W12R5-0875(C)
W1505-0875
W15R5-1375
W16
W20
W25MR5-0562(C)
W3
W30
W35
W75
BT30-MDSK10-60
BT30-MDSK16-75
BT30-MMC12-105
BT30-MMC4-105
BT30-MMC8-105
BT30-VC13-120
BT30-VC13-90
BT40-MMC12C-120
BT40-MMC4-90
BT40-SK10-75
BT40-SK16-120P
BT40-SK16-60
BT40-VC13F-60
BT40-VC6-60
BT50-MMC12C-105
BT50-MMC12C-135
BT50-MMC12C-165
BT50-MMC4-105
BT50-MMC8C-135
BT50-SK10-165
BT50-SK16-195
BT50-SK6-165
BT50-SK6-195
BT50-VC13-105
BT50-VC13-135
BT50-VC13-165
BT50-VC6-105
BT50-VC6-135
BT50-VC6-165
CAT40-MMC12F-120U
CAT40-MMC8C-125U-A
CAT40-SK10F-120U
CAT40-SK16F-120U
CAT40-SK6F-150U
CAT40-VC6F-60U
CAT50-MMC12-165U
CAT50-MMC12C-105U
CAT50-MMC8C-135U
CAT50-SK6-195U
CAT50-VC13-135U
CAT50-VC13-165U
CAT50-VC6-135U
CAT50-VC6-165U
HSK40E-VC13-120
HSK63F-VC6-65
K1.1/4-MMC8C-160
K1.1/4-SK6-170
CAT40N-MDPE-M16-65U
KM3/4-14
KM32-3/16
KM32-5/16
Page 7 of 12
147.00
150.00
193.00
159.00
181.00
175.00
181.00
214.00
199.00
165.00
156.00
71.50
551.00
515.00
575.00
786.00
186.00
74.00
382.00
148.50
163.00
166.00
72.50
665.50
590.50
620.00
739.00
540.50
441.00
442.00
739.00
689.00
358.50
390.50
386.00
513.50
406.00
912.00
955.00
993.50
890.00
958.00
444.00
542.00
428.50
561.00
581.00
599.50
623.50
575.50
593.00
617.00
705.00
396.00
438.50
493.50
498.00
513.50
693.00
753.00
813.00
523.00
539.00
548.50
572.00
545.50
476.50
430.50
482.00
269.50
420.00
49.75
73.75
73.75
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
H
H
H
H
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
ACC
Wel
Wel
Wel
Wel
ACC
ACC
Wel
ACC
ACC
ACC
ACC
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
HSK40E
HSK63F
SS
SS
CAT40
COLLET
COLLET
COLLET
ER16
ER16
ER25
ER16
ER25
ER25
ER32
ER40
ER8
ER11
ER16
100TG
TAP
TAP
TAP
TAP
ER16
ER20
TAP
ACC
ACC
ACC
ACC
SK10
SK16
MMC
MMC
MMC
VC13
VC13
MMC
MMC
SK10
SK16
SK16
VC13
VC6
MMC
MMC
MMC
MMC
MMC
SK10
SK16
SK6
SK6
VC13
VC13
VC13
VC6
VC6
VC6
MMC
MMC
SK10
SK16
SK6
VC6
MMC
MMC
MMC
SK6
VC13
VC13
VC6
VC6
VC13
VC6
MMC
SK16
EMH
KM3/4
KM32
KM32
32MM
60mm
75mm
105mm
105mm
105mm
120mm
90mm
120mm
90mm
75mm
120mm
60mm
60mm
60mm
105mm
135mm
165mm
105mm
135mm
165mm
195mm
165mm
195mm
105mm
135mm
165mm
105mm
135mm
165mm
120mm
125mm
120mm
120mm
150mm
60mm
165mm
105mm
135mm
195mm
135mm
165mm
135mm
165mm
120mm
65mm
65mm
-
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
7/16 Straight Collet
9/16 Straight Collet
1/16 PMK MMK VMK Collet
14mm Straight Collet Depth Adjustable
3/4 Straight Collet Depth Adjustable
6mm Straight Collet Depth Adjustable
3/16 Straight Collet Depth Adjustable
7/16 Straight Collet Depth Adjustable
BT30 1/4 Shrink Fit Holder Balanceable
BT30 3/8 Shrink Fit Holder Pre-Balanced
BT30 1/2 Shrink Fit Holder Balanceable
BT30 5/8 Shrink Fit Holder Balanceable
BT30 3/4 Shrink Fit Holder Balanceable
BT40 1/8 Shrink Fit Holder G6.3 15,000rpm-3rd Generation
BT40 3/16 Shrink Fit Holder G6.3 15,000rpm-3rd Generation
BT40 3/16 Shrink Fit Holder G6.3 15,000rpm-3rd Generation
BT40 1/4 Shrink Fit Holder Balanceable
BT40 3/8 Shrink Fit Holder Balanceable
BT40 10mm Shrink Fit Holder Balanceable
BT40 10mm Shrink Fit Holder Balanceable
BT40 12mm Shrink Fit Holder Balanceable
BT40 1.1/4 Shrink Fit Holder Balanceable
BT40 12mm Shrink Fit Holder Balanceable
BT40 16mm Shrink Fit Holder Balanceable
BT40 16mm Shrink Fit Holder Balanceable
BT40 20mm Shrink Fit Holder Balanceable
BT40 32mm Shrink Fit Holder Balanceable
BT40 8mm Shrink Fit Holder Balanceable
BT40 8mm Shrink Fit Holder Balanceable
BT50 3/8 Shrink Fit Holder Balanceable
BT50 1/2 Shrink Fit Holder Balanceable
BT50 1in Shrink Fit Holder Balanceable
BT50 1.1/4 Shrink Fit Holder Balanceable
BT50 20mm Shrink Fit Holder Balanceable
BT50 20mm Shrink Fit Holder Balanceable
BT50 25mm Shrink Fit Holder Balanceable
BT50 25mm Shrink Fit Holder Balanceable
BT50 32mm Shrink Fit Holder Balanceable
BT50 32mm Shrink Fit Holder Balanceable
BT40 1in Milling Chuck
BT40 1in Milling Chuck High Speed
BT40 32mm Milling Chuck
BT50 1.1/4 Milling Chuck High Speed
BT50 1in Milling Chuck
BT50 2in Milling Chuck
BT50 3/4 Milling Chuck High Speed
BT50 32mm Milling Chuck
CAT40 1/8 Shrink Fit Holder G6.3 15,000rpm
CAT40 3/16 Shrink Fit Holder G6.3 15,000rpm
CAT40 1/4 Shrink Fit Holder Balanceable
CAT40 3/8 Shrink Fit Holder Balanceable
CAT40 3/8 Shrink Fit Holder Balanceable
CAT40 1/2 Shrink Fit Holder
CAT40 5/8 Shrink Fit Holder Pre-Balanced
CAT40 5/8 Shrink Fit Holder Balanceable
CAT40 3/4 Shrink Fit Holder Pre-Balanced
CAT40 3/4 Shrink Fit Holder Balanceable
CAT40 1in Shrink Fit Holder Balanceable
CAT40 10mm Shrink Fit Holder Balanceable
CAT40 12mm Shrink Fit Holder Balanceable
CAT40 1.1/4 Shrink Fit Holder Balanceable
CAT40 1.1/4 Shrink Fit Holder Balanceable
CAT40 12mm Shrink Fit Holder
CAT40 16mm Shrink Fit Holder Balanceable
CAT40 20mm Shrink Fit Holder Balanceable
CAT40 25mm Shrink Fit Holder 3rd Generation
CAT40 6mm Shrink Fit Holder Balanceable
CAT50 3/8 Shrink Fit Holder Balanceable
CAT50 10mm Shrink Fit Holder Balanceable
CAT50 1.1/4 Shrink Fit Holder Balanceable
CAT50 1.1/4 Shrink Fit Holder Balanceable
CAT50 12mm Shrink Fit Holder Pre-Balanced
CAT50 12mm Shrink Fit Holder Balanceable
CAT50 16mm Shrink Fit Holder Pre-Balanced
KM32-7/16
KM32-9/16
MPK4-1/16
NK1.1/4-14
NK1-3/4
NK1-6
NK3/4-3/16
NK3/4-7/16
B30SF-0250-3.15B
B30SF-0375-3.15
B30SF-0500-3.15B
B30SF-0625-3.15B
B30SF-0750-3.15B
B40SF-0125-6.30
B40SF-0187-3.15
B40SF-0187-6.30
B40SF-0250-6.30B
B40SF-0375-6.30B
B40SF-10-160B
B40SF-10-90B
B40SF-12-160B
B40SF-1250-3.94B
B40SF-12-90B
B40SF-16-160B
B40SF-16-90B
B40SF-20-160B
B40SF-32-100B
B40SF-8-160B
B40SF-8-90B
B50SF-0375-3.15B
B50SF-0500-3.15B
B50SF-1000-3.94B
B50SF-1250-3.94B
B50SF-20-100B
B50SF-20-160B
B50SF-25-100B
B50SF-25-160B
B50SF-32-100B
B50SF-32-160B
BT40-C1-105
BT40-C1-90G
BT40-C32-105
BT50-C1.1/4-135G
BT50-C1-105
BT50-C2-105
BT50-C3/4-105G
BT50-C32-165
C40SF-0125-6.30
C40SF-0187-6.30
C40SF-0250-6.30B
C40SF-0375-3.15B
C40SF-0375-6.30B
C40SF-0500-3.15
C40SF-0625-5.12
C40SF-0625-6.30B
C40SF-0750-3.15
C40SF-0750-6.30B
C40SF-1000-6.30B
C40SF-10-160B
C40SF-12-160B
C40SF-1250-3.94B
C40SF-1250-6.30B
C40SF-12-80
C40SF-16-160B
C40SF-20-160B
C40SF-25-100
C40SF-6-160B
C50SF-0375-6.30B
C50SF-10-80B
C50SF-1250-3.94B
C50SF-1250-6.30B
C50SF-12-80
C50SF-12-80B
C50SF-16-160
Page 8 of 12
73.75
73.75
106.50
71.50
71.50
66.75
71.50
66.75
303.00
303.00
303.00
303.00
303.00
468.00
413.00
468.00
349.00
349.00
355.00
297.00
355.00
292.00
297.00
355.00
297.00
355.00
297.00
355.00
297.00
402.00
402.00
402.00
402.00
404.00
494.00
404.00
494.00
404.00
494.00
423.50
629.00
476.50
740.50
578.50
1,122.50
649.00
693.00
454.00
454.00
339.00
284.00
339.00
284.00
310.00
339.00
284.00
339.00
339.00
339.00
349.00
284.00
339.00
284.00
349.00
349.00
292.00
349.00
453.00
383.00
391.00
453.00
383.00
383.00
450.00
H
H
H
H
H
H
H
H
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
COLLET
BT30
BT30
BT30
BT30
BT30
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT50
BT40
BT40
BT40
BT50
BT50
BT50
BT50
BT50
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
KM32
KM32
VMK
NK
NK
NK
NK
NK
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
MC
MC
MC
MC
MC
MC
MC
MC
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
14MM
3/4in
6MM
3/16in
7/16in
1/4in
3/8in
1/2in
5/8in
3/4in
1/8in
3/16in
3/16in
1/4in
3/8in
10MM
10MM
12MM
1.1/4in
12MM
16MM
16MM
20MM
32MM
8MM
8MM
3/8in
1/2in
1in
1.1/4in
20MM
20MM
25MM
25MM
32MM
32MM
1in
1in
32MM
1.1/4in
1in
2in
3/4in
32MM
1/8in
3/16in
1/4in
3/8in
3/8in
1/2in
5/8in
5/8in
3/4in
3/4in
1in
10MM
12MM
1.1/4in
1.1/4in
12MM
16MM
20MM
25MM
6MM
3/8in
10MM
1.1/4in
1.1/4in
12MM
12MM
16MM
3.15in
3.15in
3.15in
3.15in
3.15in
6.30in
3.15in
6.30in
6.30in
6.30in
160mm
90mm
160mm
3.94in
90mm
160mm
90mm
160mm
100mm
160mm
90mm
3.15in
3.15in
3.15in
3.15in
100mm
160mm
100mm
160mm
100mm
160mm
105mm
90mm
105mm
135mm
105mm
105mm
105mm
165mm
6.30in
6.30in
6.30in
3.15in
6.30in
3.15in
5.12in
6.30in
3.15in
6.30in
6.30in
160mm
160mm
3.94in
6.30in
80mm
160mm
160mm
100mm
160mm
6.30in
80mm
3.94in
6.30in
80mm
80mm
160mm
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
CAT50 16mm Shrink Fit Holder Balanceable
CAT50 20mm Shrink Fit Holder Balanceable
CAT50 25mm Shrink Fit Holder Balanceable
CAT50 32mm Shrink Fit Holder Balanceable
CAT50 32mm Shrink Fit Holder Balanceable
CAT50 6mm Shrink Fit Holder Balanceable
CAT50 8mm Shrink Fit Holder 3rd Gen
CAT50 8mm Shrink Fit Holder Balanceable
CAT40 1.1/4 Milling Chuck Nose=64
CAT50 1in Milling Chuck DIN
HSK100A 3/8 Shrink Fit Holder Balanceable
HSK100A 1/2 Shrink Fit Holder Balanceable
HSK100A 5/8 Shrink Fit Holder Balanceable
HSK100A 5/8 Shrink Fit Holder Balanceable
HSK100A 3/4 Shrink Fit Holder Balanceable
HSK100A 1in Shrink Fit Holder Balanceable
HSK100A 10mm Shrink Fit Holder Balanceable
HSK100A 10mm Shrink Fit Holder Balanceable
HSK100A 12mm Shrink Fit Holder Balanceable
HSK100A 1.1/4 Shrink Fit Holder Balanceable
HSK100A 1.1/4 Shrink Fit Holder Balanceable
HSK100A 12mm Shrink Fit Holder
HSK100A 12mm Shrink Fit Holder Balanceable
HSK100A 16mm Shrink Fit Holder Balanceable
HSK100A 20mm Shrink Fit Holder Balanceable
HSK100A 25mm Shrink Fit Holder Balanceable
HSK100A 25mm Shrink Fit Holder Balanceable
HSK100A 32mm Shrink Fit X 120mm
HSK100A 32mm Shrink Fit Holder Balanceable
HSK100A 32mm Shrink Fit Holder Balanceable
HSK100A 6mm Shrink Fit Holder Balanceable
HSK100A 6.0mm Shrink Fit Holder
HSK100A 6mm Shrink Fit Holder Balanceable
HSK100A 8.0mm Shrink Fit Holder
HSK100A 8mm Shrink Fit Holder Balanceable
HSK32E 10mm Shrink Fit Holder Balanceable
HSK32E 3mm Shrink Fit Holder Balanceable
HSK32E 4mm Shrink Fit Holder Balanceable
HSK32E 6mm Shrink Fit Holder Balanceable
HSK32E 8mm Shrink Fit Holder Balanceable
HSK40E 1/8 Shrink Fit Holder Balanceable
HSK40E 1/4 Shrink Fit Holder Balanceable
HSK40E 5/16 Shrink Fit Holder Balanceable
HSK40E 5/16 Shrink Fit Holder Balanceable
HSK40E 3/8 Shrink Fit Holder Balanceable
HSK40E 1/2 Shrink Fit Holder Balanceable
HSK40E 5/8 Shrink Fit Holder Balanceable
HSK40E 10mm Shrink Fit Holder Balanceable
HSK40E 10mm Shrink Fit Holder Balanceable
HSK40E 3mm Shrink Fit Holder Balanceable
HSK40E 6mm Shrink Fit Holder Balanceable
HSK40E 6mm Shrink Fit Holder Balanceable
HSK40E 8mm Shrink Fit Holder Balanceable
HSK40E 8mm Shrink Fit Holder Balanceable
HSK63A 1/4 Shrink Fit Holder Pre-Balanced
HSK63A 1/4 Shrink Fit Holder Balanceable
HSK63A 1/4 Shrink Fit Holder Balanceable
HSK63A 3/8 Shrink Fit Holder Pre-Balanced
HSK63A 3/8 Shrink Fit Holder Balanceable
HSK63A 3/8 Shrink Fit Holder Balanceable
HSK63A 1/2 Shrink Fit Holder Balanceable
HSK63A 5/8 Shrink Fit Holder Pre-Balanced
HSK63A 5/8 Shrink Fit Holder Balanceable
HSK63A 5/8 Shrink Fit Holder Balanceable
HSK63A 3/4 Shrink Fit Holder Pre-Balanced
HSK63A 1in Shrink Fit Holder Balanceable
HSK63A 1in Shrink Fit Holder Balanceable
HSK63A 10mm Shrink Fit Holder Balanceable
HSK63A 10mm Shrink Fit Holder Balanceable
HSK63A 16mm Shrink Fit Holder Balanceable
HSK63A 16mm Shrink Fit Holder Balanceable
HSK63A 20mm Shrink Fit Holder Balanceable
HSK63A 20mm Shrink Fit Holder Balanceable
HSK63A 25mm Shrink Fit Holder Balanceable
C50SF-16-80B
C50SF-20-80B
C50SF-25-100B
C50SF-32-100B
C50SF-32-160B
C50SF-6-80B
C50SF-8-160
C50SF-8-80B
CAT40-C1.1/4-120U
CAT50-C1F-135U
HSK100A-SF0375-6.30B
HSK100A-SF0500-3.74B
HSK100A-SF0625-3.94B
HSK100A-SF0625-6.30B
HSK100A-SF0750-6.30B
HSK100A-SF1000-6.30B
HSK100A-SF10-160B
HSK100A-SF10-90B
HSK100A-SF12-160B
HSK100A-SF1250-4.72B
HSK100A-SF1250-6.30B
HSK100A-SF12-95
HSK100A-SF12-95B
HSK100A-SF16-160B
HSK100A-SF20-160B
HSK100A-SF25-115B
HSK100A-SF25-160B
HSK100A-SF32-120
HSK100A-SF32-120B
HSK100A-SF32-160B
HSK100A-SF6-160B
HSK100A-SF6-85
HSK100A-SF6-85B
HSK100A-SF8-160
HSK100A-SF8-160B
HSK32E-SF10-80B
HSK32E-SF3-60B
HSK32E-SF4-60B
HSK32E-SF6-100B
HSK32E-SF8-100B
HSK40E-SF0125-2.36B
HSK40E-SF0250-5.12B
HSK40E-SF0312-3.15B
HSK40E-SF0312-5.12B
HSK40E-SF0375-5.12B
HSK40E-SF0500-5.12B
HSK40E-SF0625-5.12B
HSK40E-SF10-130B
HSK40E-SF10-80B
HSK40E-SF3-60B
HSK40E-SF6-130B
HSK40E-SF6-80B
HSK40E-SF8-130B
HSK40E-SF8-80B
HSK63A-SF0250-3.15
HSK63A-SF0250-3.15B
HSK63A-SF0250-6.30B
HSK63A-SF0375-3.35
HSK63A-SF0375-3.35B
HSK63A-SF0375-6.30B
HSK63A-SF0500-6.30B
HSK63A-SF0625-3.74
HSK63A-SF0625-3.74B
HSK63A-SF0625-6.30B
HSK63A-SF0750-3.94
HSK63A-SF1000-4.53B
HSK63A-SF1000-6.30B
HSK63A-SF10-160B
HSK63A-SF10-85B
HSK63A-SF16-160B
HSK63A-SF16-95B
HSK63A-SF20-100B
HSK63A-SF20-160B
HSK63A-SF25-115B
Page 9 of 12
383.00
383.00
394.00
394.00
450.00
383.00
450.00
383.00
565.00
890.50
561.00
463.00
463.00
561.00
561.00
561.00
571.00
472.00
571.00
463.00
561.00
472.00
472.00
571.00
571.00
472.00
571.00
472.00
472.00
571.00
571.00
472.00
472.00
571.00
571.00
297.00
432.00
432.00
338.00
338.00
367.00
326.00
274.00
326.00
326.00
326.00
326.00
326.00
274.00
367.00
326.00
274.00
326.00
274.00
338.00
338.00
412.00
338.00
338.00
412.00
412.00
338.00
338.00
412.00
338.00
338.00
412.00
420.00
345.00
420.00
345.00
345.00
420.00
345.00
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT40
CAT50
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK100A
HSK32E
HSK32E
HSK32E
HSK32E
HSK32E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK40E
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
HSK63A
SF
SF
SF
SF
SF
SF
SF
SF
MC
MC
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
16MM
20MM
25MM
32MM
32MM
6MM
8MM
8MM
1.1/4in
1in
3/8in
1/2in
5/8in
5/8in
3/4in
1in
10MM
10MM
12MM
1.1/4in
1.1/4in
12MM
12MM
16MM
20MM
25MM
25MM
32MM
32MM
32MM
6MM
6MM
6MM
8MM
8MM
10MM
3MM
4MM
6MM
8MM
1/8in
1/4in
5/16in
5/16in
3/8in
1/2in
5/8in
10MM
10MM
3MM
6MM
6MM
8MM
8MM
1/4in
1/4in
1/4in
3/8in
3/8in
3/8in
1/2in
5/8in
5/8in
5/8in
3/4in
1in
1in
10MM
10MM
16MM
16MM
20MM
20MM
25MM
80mm
80mm
100mm
100mm
160mm
80mm
160mm
80mm
120mm
135mm
6.30in
3.74in
3.94in
6.30in
6.30in
6.30in
160mm
90mm
160mm
4.72in
6.30in
95mm
95mm
160mm
160mm
115mm
160mm
120mm
120mm
160mm
160mm
85mm
85mm
160mm
160mm
80mm
60mm
60mm
100mm
100mm
2.36in
5.12in
3.15in
5.12in
5.12in
5.12in
5.12in
130mm
80mm
60mm
130mm
80mm
130mm
80mm
3.15in
3.15in
6.30in
3.35in
3.35in
6.30in
6.30in
3.74in
3.74in
6.30in
3.94in
4.53in
6.30in
160mm
85mm
160mm
95mm
100mm
160mm
115mm
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
HSK63A 25mm Shrink Fit Holder Balanceable
HSK63A 32mm Shrink Fit Holder Balanceable
HSK63A 8mm Shrink Fit Holder Balanceable
HSK63F 3/4 Milling Chuck High Speed
HSK80F 5/8 Shrink Fit Holder Balanceable
NMTB40 3/4 Milling Chuck
NMTB50 2in Milling Chuck
HSK63F 3/4 Shrink Fit Holder Pre-Balanced
HSK63F 1in Shrink Fit Holder Pre-Balanced
1in Straight Shank 3/8 Shrink Fit Extension
1in Straight Shank 3/8 Shrink Fit Extension 3dg Slim
1in Straight Shank 1/2 Shrink Fit Extension 3dg Slim
1in Straight Shank 10mm Shrink Fit Extension
1in Straight Shank 10mm Shrink Fit Extension 3dg Slim
1in Straight Shank 12mm Shrink Fit Extension
1in Straight Shank 12mm Shrink Fit Extension 3dg Slim
1/2 Straight Shank 1/4 Shrink Fit Extension
1/2 Straight Shank 5/16 Shrink Fit Extension
1/2 Straight Shank 3mm Shrink Fit Extension
1/2 Straight Shank 4mm Shrink Fit Extension
1/2 Straight Shank 6mm Shrink Fit Extension
1/2 Straight Shank 8mm Shrink Fit Extension
5/8 Straight Shank 1/8 Shrink Fit Extension 3dg Slim
5/8 Straight Shank 3mm Shrink Fit Extension 3dg Slim
5/8 Straight Shank 5mm Shrink Fit Extension 3dg Slim
5/8 Straight Shank 6mm Shrink Fit Extension 3dg Slim
3/4 Straight Shank 3/8 Shrink Fit Extension
3/4 Straight Shank 10mm Shrink Fit Extension
#50 Lefty ATC Flange Only
Special Flange for ATC-ALIGN-#50 MAZAK CAT50 Lefty -E500/650
ATC Alignment Tool HSK100A
BT40 ER25 RAH
BT50 Test Bar 2in x 10in
BT40 SK16 Coolant Inducer Oil Hole Holder
BT40 1in Coolant Inducer Oil Hole Holder
BT50 C3/4 Coolant Inducer Oil Hole Holder
BT50 SK16 Coolant Inducer Oil Hole Holder
BT50 3/4 Coolant Inducer Oil Hole Holder
CAT40 C1.1/4 Coolant Inducer Oil Hole Holder
CAT40 SK16 Coolant Inducer Oil Hole Holder
CAT40 1.1/4 Coolant Inducer Oil Hole Holder
CAT40 3/4 Coolant Inducer Oil Hole Holder
CAT40 1.1/4 Coolant Inducer Oil Hole Holder
CAT50 C1.1/4 Coolant Inducer Oil Hole Holder
Height Presetter 6in
HSK63F Test Bar 2in x 14in
Front Reading Setter
35 Taper Locking Fixture
HSK100A ER16 HiTorq Collet Chuck Balanceable
HSK100A 1in Shell Mill Holder Balanceable Boeing
HSK100A 1.1/4 Balanceable Shell Mill Holder
HSK100A 1.50 SMH X 4.00
HSK63A 5/16 End Mill Holder Balanceable
HSK63A 3/8 End Mill Holder Balanceable
HSK63A 1in End Mill Holder Balanceable
HSK63A 1in End Mill Holder Balanceable
BT30 1/8 End Mill Holder Balanceable
BT30 1/4 End Mill Holder Balanceable
BT30 5/16 End Mill Holder Balanceable
BT30 3/8 End Mill Holder Balanceable
BT30 1/2 End Mill Holder Balanceable
BT30 5/8 End Mill Holder Balanceable
BT30 3/4 End Mill Holder Balanceable
BT30 ER25 HiTorq Collet Chuck Balanceable
BT30 ER32 HiTorq Collet Chuck Balanceable
BT30 75TG Collet Chuck Balanceable
BT30 ER11 Collet Chuck Balanceable
BT30 ER16 HiTorq Collet Chuck Balanceable
BT35 5/8 End Mill Holder Balanceable
BT35 ER16 HiTorq Collet Chuck Balanceable
BT35 75TG Collet Chuck Balanceable
BT40 1/8 End Mill Holder Balanceable
BT40 3/16 End Mill Holder Balanceable
BT40 1/4 End Mill Holder Balanceable
HSK63A-SF25-160B
HSK63A-SF32-120B
HSK63A-SF8-160B
HSK63F-C3/4-95G
HSK80F-SF0625-3.00B
NMTB40-C3/4-70
NMTB50-C2-105
S/HSK63F-SF0750-75
S/HSK63F-SF1000-75
S10SF-0375-6.00
S10SF-0375-6.00-3
S10SF-0500-6.00-3
S10SF-10-6.00
S10SF-10-6.00-3
S10SF-12-6.00
S10SF-12-6.00-3
S50SF-0250-4.00
S50SF-0312-4.00
S50SF-3-4.00
S50SF-4-4.00
S50SF-6-4.00
S50SF-8-4.00
S62SF-0125-4.00-3
S62SF-3-4.00-3
S62SF-5-4.00-3
S62SF-6-4.00-3
S75SF-0375-6.00
S75SF-10-6.00
50-ATC-3-C-FLANGE-L
ATC/CAT50-FLANGE-L
ATC-ALIGN-HSK100A
B40RA-0025
B50-TESTBAR-10.00
BT40-MOK16-150
BT40-MOL1-130
BT50-MOC3/4-160
BT50-MOK16-165
BT50-MOL3/4-150
CAT40U-MOC1.1/4-170
CAT40U-MOK16-160
CAT40U-MOL1.1/4-145
CAT40U-MOL3/4-140
CAT40U-SLO1.1/4-140
CAT50U-MOC1.1/4-170
HP-6
HSK63F-TESTBAR-14.0
XYZ-A
35-LCFX
B/HSK100A-ER16-4.00
B/HSK100A-SM0750-3.0
B/HSK100A-SM1250-4.0
B/HSK100A-SM1500-4.0
B/HSK63A-0312-5.00
B/HSK63A-0375-5.00
B/HSK63A-1000-4.50
B/HSK63A-1000-6.00
B3006-0125B
B3006-0250B
B3006-0312B
B3006-0375B
B3006-0500B
B3006-0625B
B3006-0750B
B3007-0025B
B3007-0032B
B3007-0750B
B3017-0011B
B3017-0016B
B3506-0625B
B3507-0016B
B3507-0750B
B4006-0125B
B4006-0187B
B4006-0250B
Page 10 of 12
420.00
345.00
420.00
654.00
385.00
820.00
1,281.00
150.00
150.00
165.00
170.00
170.00
165.00
170.00
165.00
170.00
182.00
182.00
182.00
182.00
182.00
182.00
182.00
170.00
170.00
170.00
165.00
165.00
506.00
506.00
1,580.00
6,800.00
1,595.00
2,294.00
1,727.00
2,299.00
2,329.00
1,771.00
2,363.00
2,294.00
1,829.00
1,806.00
1,409.00
2,524.00
1,234.00
2,100.00
818.00
135.00
565.00
460.00
460.00
460.00
490.00
490.00
490.00
483.00
210.00
210.00
210.00
210.00
210.00
210.00
210.00
269.00
269.00
269.00
330.00
330.00
235.00
361.00
278.00
190.00
190.00
190.00
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
P
HSK63A
HSK63A
HSK63A
HSK63F
HSK80F
NMTB40
NMTB50
HSK63F
HSK63F
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
SS
ACC
ACC
ACC
BT40
BT50
BT40
BT40
BT50
BT50
BT50
CAT40
CAT40
CAT40
CAT40
CAT40
CAT50
ACC
HSK63F
ACC
ACC
HSK100A
HSK100A
HSK100A
HSK100A
HSK63A
HSK63A
HSK63A
HSK63A
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT30
BT35
BT35
BT35
BT40
BT40
BT40
SF
SF
SF
MC
SF
MC
MC
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
SF
ACC
ACC
ACC
RAH
TESTBAR
CUSTOM
CUSTOM
CUSTOM
CUSTOM
CUSTOM
CUSTOM
CUSTOM
CUSTOM
CUSTOM
CUSTOM
CUSTOM
ACC
TESTBAR
ACC
ACC
ER16
SMH
SMH
SMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
ER25
ER32
75TG
ER11
ER16
EMH
ER16
75TG
EMH
EMH
EMH
25MM
32MM
8MM
3/4in
5/8in
3/4in
2in
3/4in
1in
3/8in
3/8in
1/2in
10MM
10MM
12MM
12MM
1/4in
5/16in
3MM
4MM
6MM
8MM
1/8in
3MM
5MM
6MM
3/8in
10MM
ER25
SK16
1in
3/4in
SK16
3/4in
1.1/4in
SK16
1.1/4in
3/4in
1.1/4in
1.1/4in
3/4in
1.1/4in
1.1/2in
5/16in
3/8in
1in
1in
1/8in
1/4in
5/16in
3/8in
1/2in
5/8in
3/4in
5/8in
1/8in
3/16in
1/4in
160mm
120mm
160mm
95mm
3.00in
70mm
105mm
75mm
75mm
5.90in
10.0in
150mm
130mm
160mm
165mm
150mm
170mm
160mm
145mm
140mm
140mm
170mm
14.0in
4.00in
3.00in
4.00in
4.00in
5.00in
5.00in
4.50in
6.00in
2.00in
2.00in
2.00in
2.00in
2.50in
2.50in
2.50in
2.50in
2.00in
3.00in
4.00in
4.00in
2.50in
2.50in
2.50in
2.00in
2.00in
2.00in
LYNDEX-NIKKEN SPRING SPECIAL
06.03.2014
Contact Nemic Sales Dept. for any order questions 800-968-8665
BT40 1/2 End Mill Holder Balanceable
BT40 5/8 End Mill Holder Balanceable
BT40 3/4 End Mill Holder Balanceable
BT40 7/8 End Mill Holder Balanceable
BT40 ER11 Collet Chuck Balanceable
BT40 ER16 HiTorq Collet Chuck Balanceable
BT40 ER20 HiTorq Collet Chuck Balanceable
BT40 ER25 HiTorq Collet Chuck Balanceable
BT40 ER32 HiTorq Collet Chuck Balanceable
BT40 100TG Collet Chuck Balanceable
BT40 1/8 End Mill Holder Balanceable
BT40 3/16 End Mill Holder Balanceable
BT40 1/4 End Mill Holder Balanceable
BT40 3/8 End Mill Holder Balanceable
BT40 1/2 End Mill Holder Balanceable
BT40 3/4 End Mill Holder Balanceable
BT40 1in End Mill Holder Balanceable
BT40 1.1/4 End Mill Holder Balanceable
BT40 ER11 Collet Chuck Balanceable
BT40 ER16 HiTorq Collet Chuck Balanceable
BT40 ER25 HiTorq Collet Chuck Balanceable
BT40 ER32 HiTorq Collet Chuck Balanceable
BT40 100TG Collet Chuck Balanceable
BT50 1/2 End Mill Holder Balanceable
BT50 1.1/4 End Mill Holder Balanceable
BT50 ER16 HiTorq Collet Chuck Balanceable
BT50 75TG Collet Chuck Balanceable
BT50 ER16 HiTorq Collet Chuck Balanceable
CAT40 1.1/4 Shell Mill Holder Balanceable
CAT40 1/8 End Mill Holder Balanceable
CAT40 1/8 End Mill Holder Balanceable DIN
CAT40 3/16 End Mill Holder Balanceable
CAT40 1/4 End Mill Holder Balanceable
CAT40 5/16 End Mill Holder Balanceable DIN
CAT40 3/8 End Mill Holder Balanceable
CAT40 1/2 End Mill Holder Balanceable
CAT40 5/8 End Mill Holder Balanceable
CAT40 3/4 End Mill Holder Balanceable
CAT40 7/8 End Mill Holder Balanceable DIN
CAT40 1in End Mill Holder Balanceable
CAT40 1in End Mill Holder Balanceable DIN
CAT40 1.1/4 End Mill Holder Balanceable
CAT40 ER8 Collet Chuck Balanceable
CAT40 ER11 Collet Chuck Balanceable
CAT40 ER16 HiTorq Collet Chuck Balanceable
CAT40 ER16 HiTorq Collet Chuck Balanceable DIN
CAT40 ER20 HiTorq Collet Chuck Balanceable
CAT40 1/8 End Mill Holder Balanceable
CAT40 1/4 End Mill Holder Balanceable
CAT40 3/8 End Mill Holder Balanceable
CAT40 1/2 End Mill Holder Balanceable
CAT40 3/4 End Mill Holder Balanceable
CAT40 7/8 End Mill Holder Balanceable
CAT40 ER8 Collet Chuck Balanceable
CAT40 ER11 Collet Chuck Balanceable
CAT40 ER16 HiTorq Collet Chuck Balanceable
CAT40 ER20 HiTorq Collet Chuck Balanceable
CAT40 ER32 HiTorq Collet Chuck Balanceable
CAT40 1.1/4 Shrink Fit Holder Balanceable
CAT50 1.1/4 Shell Mill Holder Balanceable
CAT50 1/4 End Mill Holder Balanceable DIN
CAT50 3/8 End Mill Holder Balanceable
CAT50 3/8 End Mill Holder Balanceable DIN
CAT50 1/2 End Mill Holder Balanceable DIN
CAT50 5/8 End Mill Holder Balanceable DIN
CAT50 7/8 End Mill Holder Balanceable DIN
CAT50 ER11 Collet Chuck Balanceable
CAT50 ER16 HiTorq Collet Chuck Balanceable
CAT50 ER16 HiTorq Collet Chuck Balanceable DIN
CAT50 75TG Collet Chuck Balanceable
CAT50 100TG Collet Chuck Balanceable
CAT50 7/8 End Mill Holder Balanceable
CAT50 ER25 HiTorq Collet Chuck Balanceable
CAT50 ER40 HiTorq Collet Chuck Balanceable
B4006-0500B
B4006-0625B
B4006-0750B
B4006-0875B
B4007-0011B
B4007-0016B
B4007-0020B
B4007-0025B
B4007-0032B
B4007-1000B
B4016-0125B
B4016-0187B
B4016-0250B
B4016-0375B
B4016-0500B
B4016-0750B
B4016-1000B
B4016-1250B
B4017-0011B
B4017-0016B
B4017-0025B
B4017-0032B
B4017-1000B
B5006-0500B
B5006-1250B
B5007-0016B
B5007-0750B
B5017-0016B
C4001-1250B
C4006-0125B
C4006-0125B-DIN
C4006-0187B
C4006-0250B
C4006-0312B-DIN
C4006-0375B
C4006-0500B
C4006-0625B
C4006-0750B
C4006-0875B-DIN
C4006-1000B
C4006-1000B-DIN
C4006-1250B
C4007-0008B
C4007-0011B
C4007-0016B
C4007-0016B-DIN
C4007-0020B
C4016-0125B
C4016-0250B
C4016-0375B
C4016-0500B
C4016-0750B
C4016-0875B
C4017-0008B
C4017-0011B
C4017-0016B
C4017-0020B
C4017-0032B
C40SF-1250-5.12B
C5001-1250B
C5006-0250B-DIN
C5006-0375B
C5006-0375B-DIN
C5006-0500B-DIN
C5006-0625B-DIN
C5006-0875B-DIN
C5007-0011B
C5007-0016B
C5007-0016B-DIN
C5007-0750B
C5007-1000B
C5016-0875B
C5017-0025B
C5017-0040B
Page 11 of 12
190.00
190.00
190.00
201.00
306.00
286.00
305.00
286.00
305.00
226.00
194.00
213.00
213.00
189.00
189.00
194.00
213.00
230.00
368.00
345.00
356.00
380.00
242.00
266.00
309.00
368.00
278.00
437.00
217.00
173.00
225.00
176.00
173.00
225.00
173.00
173.00
173.00
173.00
256.00
184.00
242.00
213.00
305.00
286.00
286.00
340.00
286.00
188.00
188.00
188.00
188.00
188.00
213.00
368.00
345.00
345.00
345.00
380.00
310.00
246.00
253.00
216.00
253.00
253.00
253.00
260.00
329.00
335.00
381.00
278.00
278.00
254.00
413.00
470.00
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT40
BT50
BT50
BT50
BT50
BT50
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT40
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
CAT50
EMH
EMH
EMH
EMH
ER11
ER16
ER20
ER25
ER32
100TG
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
ER11
ER16
ER25
ER32
100TG
EMH
EMH
ER16
75TG
ER16
SMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
EMH
ER8
ER11
ER16
ER16
ER20
EMH
EMH
EMH
EMH
EMH
EMH
ER8
ER11
ER16
ER20
ER32
SF
SMH
EMH
EMH
EMH
EMH
EMH
EMH
ER11
ER16
ER16
75TG
100TG
EMH
ER25
ER40
1/2in
5/8in
3/4in
7/8in
1/8in
3/16in
1/4in
3/8in
1/2in
3/4in
1in
1.1/4in
1/2in
1.1/4in
1.1/4in
1/8in
1/8in
3/16in
1/4in
5/16in
3/8in
1/2in
5/8in
3/4in
7/8in
1in
1in
1.1/4in
1/8in
1/4in
3/8in
1/2in
3/4in
1.1/4in
1.1/4in
1/4in
3/8in
3/8in
1/2in
5/8in
7/8in
7/8in
2.50in
2.50in
2.50in
3.50in
2.50in
2.50in
2.50in
2.50in
3.00in
3.50in
4.00in
4.00in
4.00in
4.00in
4.00in
4.00in
6.00in
6.00in
4.00in
4.00in
4.00in
5.00in
5.50in
3.00in
4.00in
2.50in
3.50in
4.00in
2.88in
2.50in
2.50in
2.50in
2.50in
2.50in
2.50in
3.00in
3.00in
3.00in
3.50in
4.00in
4.00in
4.00in
2.50in
2.50in
2.50in
2.50in
2.50in
4.00in
4.00in
4.00in
4.00in
4.00in
6.00in
4.00in
4.00in
4.00in
4.00in
5.00in
5.12in
2.88in
3.00in
3.00in
3.00in
3.00in
3.00in
4.00in
2.50in
2.50in
2.50in
3.50in
3.50in
6.00in
4.00in
6.00in
LYNDEX-NIKKEN SPRING SPECIAL
CAT50 100TG Collet Chuck Balanceable
CAT50 3/8 End Mill Holder Balanceable
CAT50 1.1/4 Shrink Fit Holder Balanceable
CAT50 16mm Shrink Fit Holder Balanceable
HSK100A 3/8 Shrink Fit Holder Pre-Balanced
HSK100A 1in Shrink Fit Holder Pre-Balanced
HSK80F 14mm Shrink Fit Holder Balanceable
HSK80F 3/4 Shell Mill Holder Balanceable
C5017-1000B
C5026-0375B
C50SF-1250A-3.94B
C50SF-16-160B
HSK100A-SF0375-3.54
HSK100A-SF1000-4.53
HSK80F-SF14-3.00B
HSK80F-SM0750-2.375B
291.00
286.00
294.00
450.00
463.00
450.00
385.00
385.00
06.03.2014
CAT50
CAT50
CAT50
CAT50
HSK100A
HSK100A
HSK80F
HSK80F
100TG
EMH
SF
SF
SF
SF
SF
SMH
3/8in
1.1/4in
16mm
3/8in
1in
14mm
3/8in
5.50in
6.00in
3.94mm
160mm
3.54in
4.53in
3.00in
2.375in
1547 Division Ave S | Grand Rapids, MI 49507
800-968-8665 | Fax: 616-241-1811 | www.nemic.net
[email protected]
Contact Nemic Sales Dept. for any order questions
800-968-8665
Page 12 of 12
1547 Division Ave S | Grand Rapids, MI 49507
800-968-8665 | Fax: 616-241-1811 | www.nemic.net
[email protected]
SPRING CLEANING
SALE
SAVE 20% TODAY!
Spring is here and Lyndex-Nikken is offering you great savings on tooling and accessories.
Download a complete list of all featured products at www.lyndexnikken.com/spring-cleaning
If you have any questions, please contact us at (847) 367-4800 or [email protected].
Customer Name:
Contact Name:
Address:
City :
Phone:
Email:
Distributor Name:
Contact/Salesman:
City:
Phone:
Email:
■
■
■
■
■
■
State:
Fax:
Zip:
State:
Fax:
Zip:
Negotiate your best deal with your Lyndex-Nikken Distributor and take an additional 20% off with this coupon!
Coupon must be completely filled out and submitted to a Lyndex-Nikken distributor at the time of order - NO EXCEPTIONS!
Coupon applies to all items found on our Spring Cleaning listing while supplies last. (Listing updated weekly)
Coupon may not be combined with any other Lyndex-Nikken incentives or promotions.
Additional coupons may be downloaded from our website at www.lyndexnikken.com/spring-cleaning.
All sales are final and all items are subject to prior sale.
LYNDEX-NIKKEN OFFICE USE ONLY
Account Number:
Order Number:
P.O. Number:
Terr.
Phone: (847) 367-4800
Date:
Total:
Fax: (847) 367-4815
www.lyndexnikken.com