A FULLY INTEGRATED, OUT-THE

A FULLY INTEGRATED, OUT-THE-BOX WIRELESS SOLUTION
X-Series Accessories & Modules
IDS’s Xwave Wireless Technology
DEVELOPED BY
Xwave wireless technology is designed and manufactured in
South Africa by IDS. Built for the X-Series panel range, it offers
seamless integration of the world’s best wireless detection
technology into Africa’s best-selling alarm.
IN PARTNERSHIP WITH
IDS, in partnership with OPTEX, is proud to announce the availability of the complete Wired and
Wireless solution. Available on Africa's best selling alarm panels. IDS now stock OPTEX Xwave wireless
detectors, OPTEX wired detectors and OPTEX low current detectors for both IDS805 and X-Series
Selectable supervision on
panel and detector allows
5 levels of supervision
to meet any install
requirements
X-Series modular
expansion enables
ultimate flexibility
for wired / wireless
hybrid installs
Comms bus supervised
receiver enables reporting
of tamper, supervision fail
and low battery per zone
Integrated system
design from panel
to transmitter by IDS
gives total confidence
in signal receipt
X-Series simple scalability
enables wireless installs
up to 64 detectors, using
4 Xwave receivers
Advanced signal
jamming detection
capability ensures
you can install wireless
with total confidence
Quick installs,
total confidence
with bus-managed
receivers supporting
16 detectors each
433Mhz frequency and
local hardware design
ensures optimum range
and penetration for brick
and concrete structures
Intelligent
transmitter design
offers extended
battery life
Custom transmitter
design and factory
fitment in Optex’s
full range ensure
no-hassle installs
Introducing our fully integrated out-the-box wireless solution
A complete range of Xwave devices meets any installation requirement.
When you install Xwave with OPTEX, you partner with leaders in their field.
Xwave technology has been developed for OPTEX detectors with the full
support of OPTEX. The transmitters are manufactured and integrated with
OPTEX detectors in IDS’ Durban factory, and the integrated product retains
the original OPTEX factory warranty. For the first time in Africa, you can buy
your favored OPTEX wireless detectors, with transmitters pre-installed.
KEYPAD
X-SERIES
CONTROL PANEL
XWAVE WIRELESS
RECEIVER
X-Series
Comms Bus
XWAVE OPTEX
Xwave On
Air Protocol
X-Series Protecting Your Future
X-Series Control Panels
IDS X-Series alarm control panels are the ideal security solution for
residential and commercial environments, with a proven reputation
for reliability and providing exceptional value in the industry.
Offering an innovative range of wireless hybrid expansion, keypads
and add on modules, it is the most versatile and cost effective security
system in the market place today.
X-Series Accessories & Modules
PROGRAMMABLE FEATURES
• No activity arming
• No movement reporting
• Auto arm / disarm per partition
• Maintenance code
• Dynamic battery self test
USER FEATURES
• IDS’s renowned one-button arming
• Three quick arm modes:
(1) Stay, (2) Away, (3) Stay and go
• User programmable stay, buzz and
chime profiles
• Easy cross partition control
IDS X16 CONTROL PANEL - 860-1-473-X16
8 Zones expandable to 16 zones
IDS X64 CONTROL PANEL - 860-1-864-XS
8 Zones expandable to 64 zones
COMMUNICATION
Onboard Zones
Plug in Expander
Bus Expander
X16
X64
8
8
YES
YES
-
6
Wireless Zone Support
YES (16 zones)
YES (64 zones)
Keypads and Partitions
8
8
5 / 13
5 / 25
User Codes
128
128
Event Buffer
1000
1000
Dialler
Serial Port
PGM Outputs (onboard / total)
X-Series Keypads
• Contact ID / SIA / 4x2
• Dual and split reporting
• Serial port for GPRS comms
X-Series Expander Modules
X-SERIES 8 ZONE PLUG IN EXPANDER MODULE - 860-06-X-08PI
• Simple expansion from zone 9 to 16 for the X16 and X64 control panels
• 8 wired, end-of-line supervised zone inputs
• Small footprint, easy install, plugs directly onto the motherboard
X64 8 ZONE WIRED BUS EXPANDER MODULE - 860-06-X-08S
• 8 zone bus expansion module (max 6 per system)
• 8 wired, end-of-line supervised zone inputs
• 2 onboard programmable outputs
• Optional double end-of-line zone supervision
X64 8 ZONE SMART BUS EXPANDER MODULE - 860-06-0536
• 8 zone bus expansion module (max 6 per system)
• 8 wired, end-of-line supervised zone inputs
• 2 onboard programmable outputs
• Optional double end-of-line zone supervision
* Can be used even if smart power supply is not used
Xwave Wireless Zone Expander
860-07-563
The Xwave Wireless Zone Expander makes the X-Series control
panels incredibly versatile, providing all the benefits of a fully
supervised solution. Xwave transmitters are factory fitted into
the complete range of OPTEX detectors. With its simple 4-wire
bus connection, the receiver can be installed anywhere on the
key bus to maximize range. Any combination of wired or
wireless zones can be used making the X-Series control panels
a true hybrid solution.
FEATURES
CURVE SERIES LCD KEYPAD - 860-03-0531
CURVE SERIES 16 ZONE LED KEYPAD - 860-03-XN16-IDS
CLASSIC SERIES 16 ZONE LED KEYPAD - 860-03-XS16-IDS
The X-Series keypads provide a modern, user friendly interface.
Keypads can be mixed and matched using either a LCD keypad
with a large LCD display, or a choice of 16 zone LED keypads for
simple partition control.
• Multi-language (English, Afrikaans,
Portuguese, Spanish, Greek, Italian)
• Up to 8 Keypads per system
• Fire / Panic / Medical
• Keypad tone and volume adjustable
• Programmable zone input per keypad
• Programmable output per keypad
• IDS’s renowned one-button arming
• User programmable stay, buzz
and chime profiles
• Easy Cross Partition Access
• Three Quick Arm modes:
Stay, Away, Stay and Go
• Four user programmable Stay Profiles
• All wireless detectors are fully supervised
• RF Jamming supervision
• Detector signal strength testing
• Approximate range of 100m line of sight
between detectors and receiver
• Receivers can be installed anywhere on the
bus to optimise installation effectiveness
• All programming done from the X-Series
keypad or IDSwift2
• Auto code learn
• 2 Onboard outputs
• Xwave transmitters are factory fitted into
the complete range of OPTEX detectors
X16 - 1 Receiver, 16 Detectors
X64 - 4 Receivers, 64 Detectors
FEATURES
Xwave Universal 8 Channel Receiver
860-07-589
The Xwave Universal Receiver, with 8
relay-driven outputs, integrates seemlessly
into any control panels zone inputs, with
full supervision. The quickest way to add
OPTEX Xwave wireless detectors to any
existing installation.
IN PARTNERSHIP WITH
FEATURES
• 8 Channel connects to any control panels zones
inputs
• 3 Trouble outputs for supervision of low battery,
zone tamper and selectable RF jamming
• LED indicators per channel for zone trouble
identification
• Easy detector enrollment
• Approximate range of 100m line of sight between
detectors and receiver
• Ideal and convenient for adding OPTEX Xwave
detectors to any new or existing installation
IDS Communications
X-SMS Module
IDS Accessories
860-36-0485
FEATURES
The X-SMS module enables simple
end-user control of X-Series panels
from any SMS-enabled device. It is
custom-designed by IDS for the
X-Series panel range, so it has
only the features you really need,
enabling simple programming,
installation, and use.
• Controls the X-Series via any cellphone handset
• Simple SMS commands with confirmation replies
• Three levels of user authority:
(1) Master / (2) User / (3) Reporting
• Arm / disarm with partition control
• Query system status / partition status
• Bypass and un-bypass zones
• Trigger outputs
• Customize labels (zone, site, partition)
• Query airtime and manage SMS
• Automatic network time update option
• Multiple free web apps to choose from
X-Series Remote Transmitters
860-06-0011/0012/0014
Recently re-launched in a black polycarbonate offering new levels
of robustness, with superb battery life. When used with an X-Series
Remote Receiver it enables one to 1 functionality turning each
button into a user code.
X-Series Remote Receiver
860-07-02-DI
AlarmLink GPRS Communicator
860-454-01
GPRS-based alarm communication.
We understand that alarm
communications are the heart of
your business and that absolute
reliability and fanatical support is
crucial to you. AlarmLink enhances
this with our Smart Platform for full
monitoring of units in the field.
FEATURES
• Links with GPRS base station
• IDS serial port or PSTN terminal connections
• Full reporting of Contact ID via GPRS
• Over 99% Platform uptime since 01/01/ 2013
• Heart beat polling linked to outage notifications
• Smart Platform access for unit management
• Data T&C apply
• Offsite log of events
• Available with either a Vodacom or MTN sim card
The X-Series receiver allows for the
X-Series to be controlled from an
IDS remote transmitters. Multiple
receivers can be placed anywhere
on the bus. Each button can be
allocated to a user code, enabling
PGM Triggering, arm / disarm only,
Arm by partition.
X-SPS Smart Power Supply
AlarmLink VDOOR
860-454-VDOOR/MDOOR
GPRS Communicator factory
mounted onto an alarm door
panel providing greater
convenience and security.
X-Series Voice Module
860-06-X64-0412
The voice module allows any touch-tone
telephone to act as a keypad for your
X-Series alarm system. Call in from any
phone and enter your access code, and
the voice module will provide voice
prompts to retrieve the status of or
control your panel. Also provides
easy-to-understand voice-reporting
of alarm events.
860-01-0537
FEATURES
• Full functionality of AlarmLink GPRS communicator
• Serial integration into IDS805s and X-Series panels
• Telephone dialler integration
(into most other panels)
• Fitting is as simple as replacing alarm panel door
FEATURES
• Full panel control from any touch-tone phone
• Arm / disarm
• Bypass
• Check status
• Customised reporting by partition / user
The X-SPS smart power supply
module is designed for installation
where additional supervised power
is required, for either larger
installations with multiple wired
detectors, or for installations where
the modules are installed in areas
away from the control panel.
ProxSwitch Proximity Reader
870-625-10
The ProxSwitch is a weatherproof proximity
switch that can be used on the X-Series to
arm and disarm partitions or can be used to
bypass zones.
FEATURES
• Long range remote transmitters
• Robust keying design
• Smart management button
• Supports partition and stay arming
• Require firm press to activate, ensuring no
false alarms
• Any button depressed for 3 seconds triggers
a panic
FEATURES
• Up to 128 users - Full user identification
• 2 Relay outputs with 1A contacts for gate and
garage control
• Any key held for more than 3 secs will trigger
a panic alarm
• Selectable re-trigger protection to prevent
accidental disarm
• Full set up is done from the keypad
• Unique one to 1 feature allows infinite flexibility
FEATURES
• 750mA Aux Power
• Supervision outputs for AC fail, low battery
and auxiliary failure
• Requires a minimum of 30va 16V AC transformer
and a 12V 7A hr battery
• Avoids groundloop on comms bus when
implementing auxillary power on larger installs
• When used in conjunction with 860-06-0536
smart expander, provides comms-bus monitoring,
and isolated, auxilliary power supply
FEATURES
• Simple standalone proximity switch
• IP65 weather proof rating
• 20 tag capacity
• Pulse or toggle replay
• Basic programming and setup
IDS Accessories
Detectors
IDSwift2 Software
FEATURES
IDSwift2 up & download configuration software is an advanced
Windows installation tool used for local and remote programming
of the X-Series control panels.
IDS Modem
• Windows graphic user interface
• Database drivers all pre-installed
• Require IDS modem to operate via Telephone
Line: 860-36-0001
• Fast USB direct connect, requires direct connect
cable 860-320-01
• Upgrade panel firmware version
• Download event log
• Download and upload panel programming
• Change panel status
• Create and manage unique system defaults
• Full user rights management & audit trail for
control room applications
• Full customer management capability
OPTEX Xwave VXI Wireless Detectors
OPTEX VXI Wired Detectors
862-01-VXI-R
862-01-VXI-RAM (with anti-masking)
862-01-DRAM (dualtech with anti-masking)
862-01-VXI-R-LC (low current - requires TX)
862-01-VXI-ST
862-01-VXI-AM (with anti-masking)
862-01-VXI-DAM-XS (dualtech with anti-masking)
Flexible enough to cater for most outdoor applications
• Outdoor 12 x 12m wireless detector
• Low mount outdoor detector
• 5 Levels of Detection Length Adjustment
• 7 Horizontal Area Adjustments
• Double conductive shielding
• SMDA Logic for environmental noise immunity,
with efficient energy management
• Advanced Temperature Compensation Logic
860-36-0001
IDS Modem, serial or USB connection for use with IDS control panels.
IDS USB Direct Connect PC Link Cable
OPTEX Xwave BX80 Wireless Detectors OPTEX BX80 Wired Detectors
862-01-BX-80N
862-01-BX-80N-LC (low current - requires TX)
860-320-01
Connect directly to any X-Series panel using this simple interface, to
upgrade firmware, download and amend programming, download
event logs, and change panel status.
Robust coverage of entrances on the side of a building
• Outdoor 24m long range PIR - 12m detection areas on both sides of detector
• Variable detection range from 2 - 12m on each side
• Double conductive shielding
• Advanced PIR technology creates a narrow, long detection area that protects
wide horizontal areas
• Limited Detection Range Function - can be adjusted to avoid detecting
unwanted objects
• Layered Detection Pattern that discriminates between large & small objects
in the detection area
X-Series Product Overview
User Feature
Programmable Feature
Hardware
Partitions
Communication
IDS’s renowned
one-button arming
No Activity Arming
Dynamic Battery self test
8 Partitions
Contact ID / SIA / 4x2
3 Quick Arm Modes:
Stay / Away / Sat & Go
862-01-BX-80NC
No Activity Reporting
Keypad Zone &
Output Terminals
Common Area
Dual & Split Reporting
User Programmable Stay,
Buzz & Chime profiles
Auto Arm / Disarm
per Partition
EOL Resistor Tamper
by Zone
Cross Partition Access
Serial Port for
Communication
4 User Programmable
Stay Profiles
Programmable
Zone Types
Programmable Zone
Loop Response Time
Global Partition Control
DTMF Comms with
Voice Module
Toggle stay profiles
from Stay to Night while
armed
Zone Varification
and Cross Zone
Positive Triggering
PGM Outputs
Outputs Programmable
per Partition
SMS Comms with
SMS Module
Intuitive
user menu
Flexible programmable
output options
Excellent Lightning
Protection
Multiple master code
options for partition
user management
GPRS Comms with
GPRS Module
OPTEX Xwave FTN Wireless Detectors
OPTEX FTN Wired Detectors
862-01-FTN-R, 5x1m
862-01-FTN-RAM, 5x1m (with anti-masking)
862-01-FTN-R-LC (low current - requies TX)
862-01-FTN-ST, 5x1m
862-01-FTN-AM, 5x1m (with anti-masking)
Protect building entry points with this flexible short
range passive detector
• Built in bracket 90° horizontal
• Dual element Pet PIR
• IP55 and UV resistant ASA body
• Operating Temperature: -20°C to +60°C
• SMDA Logic
• Intelligent and Detection Logic
• Pet Tolerance
• Active IR digital anti-masking
Detectors
Detectors
OPTEX Xwave HX40 Wireless Detectors OPTEX HX40 Wired Detectors
OPTEX LX Series Wired Detectors
862-01-HX-40RAMC, 12x12m (with anti-masking)
862-01-HX-40RAM-LC (low current - requires TX)
862-01-LX-402C, Outdoor 12x15m
862-01-LX-802NC, Outdoor 24x2m
862-01-HX-40C, 12x12m
862-01-HX-40AMC, 12x12m (with anti-masking)
OPTEX Xwave HX80 Wireless Detectors OPTEX HX80 Wired Detectors
862-01-HX-80NRAM, 25x2m (with anti-masking)
862-01-HX-80NRAM-LC (low current - requires TX)
862-01-HX-80NC, 25x2m
862-01-HX-80NAMC, 25x2m (with anti-masking)
Outdoor corridor detector with exceptional range
• 3m High mount outdoor detector
• Multiple pattern detection area technology
• Pyro-element intelligent AND logic prevents false alarms caused
by small animals
• IP55 and UV resistant ASA body
• Vegetation sway analysis logic
• Dual signal processing circuit automatically adjusts detection
sensitivity preventing missed alarms in a hostile environment
Volumetric detection ideal to trigger lightning
or CCTV video recording
• High mount outdoor detector
• Selectable detection patterns (Pet Alley or Multi-Level)
• Area-masking strips
• Day and Night modes
• Selectable pulse count (test or 2)
Xwave Wireless Door Contact
860-07-587
Small slimline design with excellent range
OPTEX Xwave Active IR Beams
862-01-AX-100TFRBEC, 30m Dual Beam
862-01-AX-100TFRC-LC, 30m Dual Beam (low current - requires TX)
862-01-AX-200TRFBEC, 60m Dual Beam
862-01-AX-200TRFC-LC, 60m Dual Beam (low current - requires TX)
862-01-SL-350QNRC, 100m Dual Beam
862-01-SL-350QNRC-LC, 100m Dual Beam (low current - requires TX)
Accurate point to point perimeter protection where
cabling is problematic
• Infrared beam interruption detection
• Interruption period - variable between 50, 100, 250, 500msec (4 steps)
• Triple tamper functions
• 99% Beam blocking stability
• High grade aspherical lens
• Battery saving timer
• D.Q. circuit (environmental disqualification)
• Long life battery operation (with four SAFT LSH20 batteries)
OPTEX Wired Dual Infrared Beams
862-01-AX-70TNC, 20m Dual Beam
862-01-AX-130TNC, 40m Dual Beam
Accurate point to point perimeter protection
• Infrared beam interruption detection
• Interruption period - variable between 50, 100, 250, 500msec (4 steps)
• 99% Beam blocking stability
• 4 Selectable beam frequencies
• High grade aspherical lens
• Built-in reed switch with magnet
• LED on / off selectable
• Fully supervised
• Small elegant design
Xwave Wireless Universal Transmitter
860-07-588
Universal transmitter with great flexibility
• 12vdc voltage input
• Fully supervised
• Jumper selectable open or
open / close status
Detectors
Detectors
OPTEX Wired Indoor Commercial Detectors
OPTEX Wired Compact Indoor PIR
862-01-CDX-AM 15x15m (with anti-masking)
862-01-CDX-NAM 24x2m (with anti-masking)
862-01-CDX-DAM 15x15m Dual Tech (with anti-masking)
862-01-RXC-ST, 12x12m
862-01-RXC-DT-X5, 12x12m Dual-Tech
Commercial grade detectors for high security application
• Quad zone logic with digital target recognition for small animal tolerance
• Improved RF and white light immunity
• Advanced temperature compensation logic
• Improved RF and white light immunity
• Quad zone logic
• Double conductive shielding
• Digital active IR anti-masking
• Advanced temperature compensation logic
• Grade 3 detectors
High performance with small animal immunity
OPTEX Wireless Indoor PIR
OPTEX Xwave Wireless Indoor Long Range PIR
862-01-CX-702RSC, 45x2.4m or 21x21m
OPTEX Wired Indoor Long Range PIR
862-01-CX-702C, 45x2.4m or 21x21m
Industrial or commercial applications where detection
range trumps aesthetics. Warehouse / Factories.
862-01-WNX-40PI-T, 12x12m
Pleasing aesthetics and solid detection performance suitable
for standard and indoor domestic and commercial installations,
including those with small pets
• Quad zone logic with digital target recognition for small animal tolerance
• Improved RF and white light immunity
• Advanced temperature compensation logic
• Improved RF and white light immunity
• Multi-focus technology
• Double conductive shielding
• 3-step Lens angle adjustment
OPTEX Xwave Wireless Indoor PIR
862-01-EX-35RC, 11x11m or 17x1.7m
OPTEX Xwave Wireless Indoor 360° PIR
862-01-WFX-360-1B, 12m 360° Ceiling Mount
OPTEX Wired Indoor 360° PIR
862-01-FX-360, 12m 360° Ceiling Mount
Optimal coverage of large open areas, particularly
in commercial or industrial applications
• Spherical Lens Design
• Temperature compensation
• Noise reduction circuit
• Selectable Pulse Count: 2 or 4
OPTEX Wired Indoor 360° High Mount PIR
862-01-SX-360Z, 18m 360° Ceiling Mount
High mount commercial with unsurpassed coverage
• Circular detection area with 726 Dense zones
• Multilevel detection pattern
• Flexible pattern adjustment with Zoom function (Patent listed)
• Up to 5 meter mounting height
Highly stable internal detector providing either wide angle
or long range flexibility and exceptional value
• Selectable Dual-Purpose Spherical Fresnel Lens: Wide angle or long range
• Patented Multi-Focus Lens
• Selectable Multilevel & Pet Alley detection patterns
• Selectable Pulse Count: 2 or 4
XWAVE TRANSMITTERS
860-07-587
Door
contact
Xwave
Wireless
860-07-588
Universal
transmitter
Xwave
Wireless
CR123
1
13uA
10mA
13uA
10mA
2 yrs
Xwave
Wireless
0.8 - 1.2m
862-01-VXI-R-LC
12 x 12m
Requires TX
0.8 - 1.2m
862-01-VXI-RAM
12 x 12m
Xwave
Wireless
0.8 - 1.2m
862-01-VXI-RDAM-X5
12 x 12m
Xwave
Wireless
0.8 - 1.2m
862-01-VXI-ST
12 x 12m
Wired
0.8 - 1.2m
862-01-VXI-AM
12 x 12m
Wired
0.8 - 1.2m
862-01-VXI-DAM-X5
12 x 12m
Wired
0.8 - 1.2m
AA
2
12uA
12uA
2 yrs
12mA
AA
2
13uA
12mA
2 yrs
AA
2
21uA
15mA
2 yrs
Wired
Pet
Ally
1.2 - 2.5m
25mA
2 yrs
Requires TX
0.8 - 1.2m LSH20
4
810uA
10mA
3 yrs
Wired
0.8 - 1.2m 41mA
3 yrs
AA
2
15uA
10mA
862-01-EX-35RC
11 x 11m
17 x 1.7m
Xave
Wireless
Pet
Ally
1.5 - 2.4m
CR123
1
10uA
13mA
2 yrs
2 yrs
862-01-WNX-40PI-T
12 x 12m
Xave
Wireless
1.5 - 2.4m
CR123
1
10uA
13mA
2 yrs
862-01-RXC-ST
12 x 12m
Wired
1.8 - 2.4m
2 yrs
862-01-RXC-DT-X5
15 x 15m
Wired
1.8 - 2.4m
862-01-CDX-AM
15 x 15m
Wired
1.8 - 2.4m
862-01-CDX-DAM
15 x 15m
Wired
1.8 - 2.4m
862-01-CDX-NAM
24 x 2m
Wired
1.8 - 2.4m
862-01-CDX-702RSC
45 x 2.4m
21 x 21m
Xwave
Wireless
Pet
Ally
1.5 x 3.6m
862-01-CX-702C
45 x 2.4m
21 x 21m
Wired
Pet
Ally
1.5 x 3.6m
8mA
2 yrs
862-01-FX-360
12m
Wired
2.4 - 3.6m
17mA
2 yrs
862-01-WNX-360-1B
12m
Xwave
Wireless
2.4 - 3.6m
862-01-SX-360Z
18m
Wired
2.4 - 5.0m
Wired
2.5 - 3.0m
862-01-HX-40AMC
12 x 12m
Wired
2.5 - 3.0m
862-01-HX-80NRAM
25 x 2m
Xwave
Wireless
2.5 - 3.0m
CR123
862-01-HX-80NRAM-LC
25 x 2m
Requires TX
2.5 - 3.0m
30uA
2.5 - 3.0m
35mA
2 yrs
2.5 - 3.0m
40mA
2 yrs
3
33uA
11mA
33uA
3
35mA
2 yrs
40mA
2 yrs
30uA
11mA
2 yrs
FIT OUTDOOR DETECTORS
CR123
1
12uA
10mA
2 yrs
10mA
2 yrs
12uA
CR123
1
13uA
OPTEX INDOOR DETECTORS
2 yrs
12 x 12m
0.8 - 1.2m
60m
3 yrs
40m
862-01-HX-40C
0.8 - 1.2m
862-01-AX-200TFRC-LC
10mA
862-01-AX-130TNC
810uA
3 yrs
2.5 - 3.0m
4
38mA
LSH20
0.8 - 1.2m 0.8 - 1.2m Requires TX
Wired
12 x 12m
Wired
Wired
862-01-HX-40RAMC-LC
5 x 1m
60m
40m
2.5 - 3.0m
5 x 1m
862-01-AX-200TFRBEC
862-01-AX-70TNC
12 x 12m
862-01-FTN-ST
623uA
2 yrs
862-01-HX-40RAMC
862-01-FTN-AM
4
35mA
CR123
0.8 - 1.2m
LSH20
0.8 - 1.2m 810uA
4
Xwave
Wireless
Xwave
Wireless
Xwave
Wireless
LSH20
HX OUTDOOR DETECTORS
5 x 1m
Requires TX
0.8 - 1.2m 35mA
862-01-FTN-RAM
30m
3 yrs
0.8 - 1.2m
0.8 - 1.2m
862-01-AX-100TFRC-LC
10mA
623uA
Requries TX
4
100m
Wired
Requires TX
LSH20
862-01-SL-350QNRC-LC
24m
5 x 1m
0.8 - 1.2m 2 yrs
862-01-BX-80NC
862-01-FTN-R-LC
24mA
15mA
0.8 - 1.2m
0.8 - 1.2m
Xwave
Wireless
810uA
30m
4
Xwave
Wireless
862-01-AX-100TFRBEC
LSH20
Requires TX
5 x 1m
Approximate
Battery Life (50
triggers per day)
24 x 2m
0.8 - 1.2m 24m
862-01-FTN-R
Current
transmitting
862-01-LX-802NC
862-01-BX-80NRC-LC
Current standby
2 yrs
0.8 - 1.2m
Wired
Batteries supplied
25mA
Xwave
Wireless
Wired
Battery Quantity
1.2 - 2.5m
100m
25 x 2m
Battery type
Pet
Ally
862-01-SL-350QNRC
Xwave
Wireless
25 x 2m
Antimask
2 yrs
24m
862-01-HX-80NC
Microwave
Wired
20mA
862-01-BX-80NRC
862-01-HX-80NAMC
Active IR
12 x 15m
AX OUTDOOR BEAMS
BX OUTDOOR DETECTORS
Mounting Height
862-01-LX-402C
VXI OUTDOOR DETECTORS
12 x 12m
Small Pet Tolerant
LX OUTDOOR DETECTORS
862-01-VXI-R
Outdoor
Indoor
Detector Type
Detector Range
Product Code
Approximate
Battery Life (50
triggers per day)
Current
transmitting
Current standby
Batteries supplied
Battery Quantity
Battery type
Antimask
Microwave
Product Overview
Active IR
Mounting Height
Small Pet Tolerant
Outdoor
Indoor
Detector Type
Detector Range
Product Code
Product Overview
20mA
2 yrs
20mA
2 yrs
13mA
2 yrs
15mA
2 yrs
17mA
2 yrs
20mA
2 yrs
20mA
2 yrs
CR123
CR123
2
1
10uA
10uA
13mA
10mA
13mA
2 yrs
2 yrs
2 yrs