EZR Zero Turn Mower

Transcription

EZR Zero Turn Mower

EZR Zero Turn Mower
®
Parts Manual
Models
915013-EZR 1742
915014-EZR 2048
915017-EZR 1542
915018-EZR 1842
915307-EZR 1742
01562900C 5/01
Supercedes 01562900, A,B
Printed in USA
THE MANUAL
PRODUCT REGISTRATION
Before you operate your unit, carefully and completely
read manuals supplied with the unit. The contents will
provide you with an understanding of safety instructions
and controls during normal operation and maintenance.
For your safety and the safety of others always read,
understand, and follow all DANGER, WARNING, and
CAUTION messages found in manuals and on safety
decals.
A warranty registration card must be filled out, signed,
and returned at time of purchase. This card activates the
warranty. Claims meeting requirements during limited
warranty period will be honored.
YOUR SATISFACTION IS IMPORTANT
Questions? Please follow these helpful steps:
1. Refer to the manuals supplied with your unit.
They will guide you through safe and proper
operation and maintenance.
They contain specifications on your unit.
If your questions are not answered in these manuals,
go to step number two.
2. Contact Your Dealer.
Our dealers will be happy to supply any service or
advice required to keep your unit operating at peak
efficiency.
A factory trained staff is available to support your
equipment needs. They stock genuine Ariens parts
and lubricants manufactured with the same precision
and skill as the original.
If your questions are not resolved by the support
staff, ask for the manager or owner.
When contacting your Dealer supply your model and
serial numbers.
Hardware descriptions are given in decimals.
Decimals to Fractions
.063
1/16
.563
9/16
.125
1/8
.625
5/8
.188
3/16
.688
11/16
.250
1/4
.750
3/4
.313
5/16
.813
13/16
.375
3/8
.875
7/8
.438
7/16
.938
15/16
.500
1/2
1.00
1
SERVICE AND REPLACEMENT PARTS
When ordering replacement parts or making service
inquiries, know the Model and Serial numbers of your unit
and engine.
Numbers are located on the product registration card in
the unit literature package. They are printed on a serial
number label, located on the frame of your unit.
• Record Unit Model and Serial numbers here:
TO SPEED PARTS ORDERING:
1.
2.
3.
4.
• Record Engine Model and Serial numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Ariens replacement parts. The replacement of
any part on this vehicle with anything other than an
Ariens authorized replacement part may adversely affect
the performance, durability, or safety of this unit and may
void the warranty. Ariens disclaims liability for any claims
or damages, whether warranty, property damage,
personal injury or death arising out of the use of
unauthorized replacement parts.
2
Know the model and serial numbers of your unit.
Know the part number required.
Know the quantity required.
Know the part description.
MODELS
TABLE OF CONTENTS
Model 915013 (EZR 1742)
17.0 HP Briggs & Stratton with 42" Mower
Serial No. 005904 and up
DECALS
Model 915014 (EZR 2048)
POWER PLANT
Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Clutch Shaft-Hydro. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Parking Brake and Dump Valves . . . . . . . . . . . . . . . . 7
HydroStatic Transaxle-Right. . . . . . . . . . . . . . . . . . . . 8
HydroStatic Transaxle-Left . . . . . . . . . . . . . . . . . . . . 10
Transaxles and Wheels . . . . . . . . . . . . . . . . . . . . . . 12
Engine, Exhaust and Belts . . . . . . . . . . . . . . . . . . . . 15
Idlers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Model 915017 (EZR 1542)
Model 915018 (EZR 1842)
MAIN FRAME
Model 915307 (EZR 1742)
Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seat and Support . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Axle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cover Assembly, Solenoid and Switches . . . . . . . . .
17
18
19
20
21
22
OPERATOR CONTROLS
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Attachment Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Hanger Arm (48” Deck Only) . . . . . . . . . . . . . . . . . . 27
ELECTRICAL SYSTEM
Continuity Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . 28
Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
MOWER DECKS
42” Mower Deck . . . . . . . . . . . . . . . . . . . . . . . . . . .
42” Mower Brackets and Rollers . . . . . . . . . . . . . . .
42” Mower Spindle . . . . . . . . . . . . . . . . . . . . . . . . . .
48” Mower Spindle . . . . . . . . . . . . . . . . . . . . . . . . . .
48” Mower Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
30
31
32
34
36
© Copyright 2001 Ariens Company
DECALS-SAFETY
Model 915013, 014, 017, 018, 307
2
1
13
2
12
2
077541
3
WARNING/AVERTISSEMENT/ADVERTENCIA
´ SEGURA DE LA PLATAFORMA
FOR SAFE DECK REMOVAL/POUR UNE DÉPOSE DU CARTER DE COUPE EN TOUTE SÉCURITÉ /PARA LA EXTRACCION
1
1
5
4
3
2
1
2
2
4
3
7/8” (22mm)
052240
8
2
DANGER/PELIGRO
3
1
1
07731400D
3
11
After proper belt installation:
1. Marks must align as shown.
2. Distance must be 7/8” (22mm) and you must be able
to rotate outer spacer with thumb and forefinger.
3. These three nuts must be tightened.
Après la pose correcte de la courroie :
1. Les repères doivent être alignées (voir schéma).
2. La distance doit être de 22 mm (7/8 in.) et il doit
être possible de tourner l'entretoise externe avec le
pouce et l'index.
3. Ces trois écrous doivent être serrés.
6
Después de la instalación adecuada de la correa:
1. Las marcas deben alinearse como se muestra.
2. La distancia debe ser de 22 mm (7/8 pulg.) y be
de ser capaz de rotar el espaciador externo con
los dedos pulgar e índice.
3. Estas tres tuercas deben apretarse.
05226200B
8
7
DANGER / PELIGRO
10
5
07731400D
9
WARNING/AVERTISSEMENT/ADVERTENCIA
Do not operate mower
unless guards are in
operating position or
bagger is attached.
07742300B
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
07754100
07754100
61518400
05224000
05226200
07757800
07800000
01556700
01528000
01556600
07731400
07742300
05226300
05226900
07757600
07757500
Qty.
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
Ne jamais utiliser
la tondeuse sans
protecteur sur le
canal d'ejection ou
sans le bac monte.
No operar segadora a
menos que las defensas
esten en posicion de
operacion o el
recogedor este fijo.
Description
Decal-Hot Surface (013, 017, 307)
Decal-Hot Surface (014, 018)
Decal-Instructional Set
Decal-Safe Deck Removal
Decal, Belt Diagram (013, 017, 018, 307)
Decal-Bilingual Danger (013, 017)
Decal-Bilingual Danger (014, 018, 307)
Non-Skid Cover
Non-Skid Cover (013, 017)
Non-Skid Cover (014, 018, 307)
Decal, Mower Pan Head Danger
Decal, Warning
Decal, Blade Alignment
Decal- Safe Deck Removal, Export (307)
Decal-Instructional Steering
Decal, Parking Brake Lever
4
078000
PE0571
DECALS-STYLE
Model 915013, 014, 017, 018, 307
1
1
2
1
3
4
LARGEUR DE COUPE
WIDTH OF CUT
ANCHURA DEL CORTE
07852100A
Item Part No.
1
2
3
4
61514400
61514300
61517700
61517800
07746400
05233300
05233200
07852100
Qty.
1
1
1
1
1
1
1
1
Description
Decal, Set EZR 2048 (014)
Decal, Set EZR 1742 (013, 307)
Decal, Ariens Jewel Oval
Decal, 48 (014)
Decal, 42 (013, 017, 018, 307)
Decal, Width of Cut (014)
5
CLUTCH SHAFT-HYDRO
Model 915013, 014, 017, 018, 307
2
4
1
5
3
6
7
15
11
8
9
13
10
12
9
2
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
05965600
05964600
06309300
06443600
03357900
03643100
01531400
01558100
01557500
06602200
06602700
01558000
01557600
05421500
00506751
07414400
00506800
06443500
05964500
06437500
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
4
1
1
1
4
Description
Bolt-Hex .44-20 x 1.50 Grade 5 (014)
Bolt-Hex .44-20 x 2.50 Grade 5 (013, 017, 018, 307)
Washer-Locking .44 x .109
Washer-Flat-Steel .469 x 2.00 x .25
Clutch-Electric/Brake (014)
Clutch-Electric/Brake (013, 017, 018, 307)
Spacer 1.004 x 1.500 x .740 (014)
Sheave-Jackshaft 4.50 (014)
Sheave- Jackshaft 4.50 (013, 017, 018, 307)
Key-Square .25 x 1.00 x .25 SAE (014)
Key-Square .25 x 1.00 x .25 SAE (013, 017, 018, 307)
Shaft-Jack (014)
Shaft-Jack (013, 017, 018, 307)
Bearing-Ball .984 x 2.04 x .59
Housing-Transmission Spindle
Screw-Tapping .31-18 x .75 Hex Washer Head
Spacer 1.00 x .253 x 1.26
Bolt-Hex .44-20 x 1.00 Grade 5
6
14
PE0370
PARKING BRAKE AND DUMP VALVES
Model 915013, 014, 017, 018, 307
2
7
4
3
15
14
5
8
6
2
12
1
10
13
10
9
8
8
11
PE0380
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
01555600
07515900
06529200
01540100
06713500
01545300
08325200
06713500
05966300
05521000
06529700
05717100
01555900
01555800
05946900
Qty.
1
2
1
1
2
1
1
4
1
2
1
1
1
1
2
Description
Rod-Brake
Knob
Nut-Hex .31-18
Dump Valve Weldment
Pin-Cotter .09 x .75
Brake Arm Weldment
Spring-Tension .051 x .60 x 2.25
Pin-Hair Internal .08 x .18 x 1.18
Bolt-Hex .25-20 x 3.00
Bushing-Flange .257 x .38 x 1.080
Nut-Locking-Center .25-20
Ring-Retaining External .50 x .050
Lever-Brake
Pivot-Brake Lever
7
HYDROSTATIC TRANSAXLE-RIGHT
Model 915013, 014, 017, 018, 307
3
4
5
2
6
7
8
13 14
9 12
10
16
15
17
11
1
18
46
19
47
20
14
25
60
22
23
21
26
27
24
45
44
12
30
43
53
31
42
49
38
51
39
48
50
55
52
28
29
40
32
33
34
41
38
35
54
57
36
56
48
59
37
58
1
PE0490
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
50437
50891RM
44870
50270
45074
9005200-5600
2003052
9008000-0128
2003018
2003016
2003043
Description
Screw .25-20 x .75
Cover-Back
Ring-Retaining
Arm-Bypass
Seal-Lip
Plug-Plastic
Ring-Retaining
Seal-Lip
Spacer
Ring-Wire Retaining
Bearing-Ball
Part Numbers listed on this page are Hydro Gear part numbers and are to be ordered or purchased from the nearest
Hydro Gear Dealer, which may be found in the Yellow Pages of the Telephone Directory.
8
HYDROSTATIC TRANSAXLE-RIGHT
Model 915013, 014, 017, 018, 307
Item Part No.
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
50315
50329
50735
50754
70394
51076
70392
50426
50281
90080000-0126
50749
44130
50317
2003023
2003087
2000015
50807
50551
50005
2003017
2003014
70331
70340
50016
50990
50890RM
50002
2003554
2003555
70082
50757
50552
2000022
50744
70393
50745
50760
50995
50759
50743
50942-2
50746
50942-1
50748
50740
50751
70314
50863
70329
Description
Bearing-Ball
Ring-Retaining
Seal-Brake Shaft
Brake Disc
Kit-Retaining Ring
Screw-Hex Washer Head 1/4-20 x 7/8
Service Assembly-Right Hand Brake Arm
Stud-Short 5/16-24
Friction Puck
Seal-Lip
Arm-Control
Washer
Nut
Cradle Bearing
Variable Swashplate
Slot Guide
Arm-Trunnion
Bearing-Thrust 30 x 52 x 13
Shaft-Input
Washer-Block Thrust
Spring-Block
Assembly-Cylinder Block 10cc
Assembly-Center Section
Screw
Filter
Housing-Lower
Pin-Alignment
Bypass Plate
Bypass Actuator
Shaft-Motor
Ring-Wire Retaining
Gear-Bevel 14T
Kit-Brake Shaft
Gear-Bevel 19T
Ring-Retaining - Axle
Seal-Plug - Side
Bearing-Ball 20 x 47 x 14
Bushing-Axle
Gear-Spur 53T
Bushing-Axle
Shaft-Axle
Seal
Assembly-Hub
Nut-Hex 3/4-16
Housing-Upper Assembly
9
HYDROSTATIC TRANSAXLE-LEFT
Model 915013, 014, 017, 018, 307
7
3
14
9
10
5
2
24
20
12
60
21
33
55
59
15
58
14
17
19
28
35
36
56
16
18
27
34
57
25
22
13
11
6
15
26
8
4
1
23
31
29
37
54
38
12
30
32
39
49
47
53
52
48
51
40
41
42
43
50
44
45
46
1
PE0480
Item Part No.
Description
1 50437
Screw 1/4-20 x .75
2 50891RM
Cover-Back
3 44870
Ring-Retaining
4 50270
Arm-Bypass
5 45074
Seal-Lip
6 9005200-5600 Plug-Plastic
7 2003052
Ring-Retaining
8 9008000-0128 Seal-Lip
9 2003018
Spacer
10 2003016
Ring-Wire Retaining
Part Numbers listed on this page are Hydro Gear part numbers and are to be ordered or purchased from the nearest
Hydro Gear Dealer, which may be found in the Yellow Pages of the Telephone Directory.
10
HYDROSTATIC TRANSAXLE-LEFT
Model 915013, 014, 017, 018, 307
Item Part No.
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
2003043
50315
50329
50735
50760
50995
50759
50743
50942-1
50746
50942-2
50748
50740
50751
70314
50863
50426
50281
90080000-0126
50749
44130
50317
70329
2003023
2003087
2000015
50807
50551
50005
2003017
2003014
70331
70340
50016
50990
50890RM
50002
2003554
2003555
70082
50757
50552
2000022
50744
70393
50745
50754
70394
51076
70391
Description
Bearing-Ball
Bearing-Ball
Ring-Retaining
Seal-Brake Shaft
Seal-Plug - Side
Bushing-Axle
Gear-Spur 53T
Bushing-Axle
Shaft-Axle
Seal
Assembly-Hub
Nut-Hex 3/4-16
Stud-Short 5/16-24
Friction Puck
Seal, Lip
Arm-Control
Washer
Nut
Assembly-Upper Housing
Bearing-Cradle
Variable Swashplate
Slot Guide
Arm-Trunnion
Shaft-Input
Washer-Block Thrust
Spring-Block
Assembly-Center Section
Screw
Filter
Housing-Lower
Pin-Alignment
Bypass Plate
Bypass Actuator
Shaft-Motor
Ring-Wire Retaining
Gear-Bevel 14T
Kit, Brake Shaft
Gear-Bevel 19T
Brake Disc
Ring-Retaining
Screw-He-Washer-Head 1/4-20 x 7/8
Assembly-Left Hand Brake Arm
11
TRANSAXLE AND WHEELS
Model 915013, 014, 017, 018, 307
4
4
11
13
4
10
9
12
16
7
8
6
17
1
2
15
5
14
3
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
01540300
01540400
05952600
06529800
01543900
01543100
03570000
07413000
07321400
06517200
01540900
05959400
06529600
07144600
07144900
07145100
15 06535000
16 07026400
17 07026300
Qty.
Description
1
1
12
12
1
2
2
8
2
2
1
8
8
2
AR
AR
8
1
1
Transaxle Hydro-Gear Right Hand
Transaxle Hydro-Gear Left Hand
Transaxle Bracket
Hose-Vent
Fan
Screw-Tapping 10-24 x .75 Hex Washer Head
Sheave-Transaxle
Nut-Locking-Top .50-20
Transmission Cradle
Bolt-Hex .38-16 x .75 Grade 5
Tire/Wheel 18 x 8.50-8
Rim for 18 x 8.50-8 Tire
Tire 18 x 8.50-8
Nut-Lug .50-20
Cap-Vent 1/2" Hydro-Gear
Fitting-Straight 1/2" O-Ring Hydro-Gear
12
3
3
PE0221
NOTES
13
ENGINE, EXHAUST AND BELTS
Model 915013, 017, 307
23
16
20
21
18
24
17
19
15
4
14
12
1
13
3
2
MACHINE
BACK
7
5
22
11
6
8
10
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
08259000
08260500
05952400
06437500
06530200
01558200
01557700
06602600
06443600
05965700
06309300
07212300
03493200
03493100
01523400
07517300
01523000
01523200
01523300
01523100
05933100
03652700
07235700
01528200
07411600
Qty.
1
1
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
2
1
1
1
2
9
Description
Engine-Briggs & Stratton Intek Single 17HP (013, 307)
Engine, Briggs & Stratton Intek Single 15HP (017)
Nut-Locking .312-18
Spacer
Engine Sheave 4.50
Key-Square .25 x 2.50 x .25
Washer-Special .469 x 2.000 x .250
Washer-Lock .44 x .109
V-Belt, Transmission Drive
Cock, Oil Drain
Adapter, Oil Drain
Tube, Oil Drain
Cable Tie
Muffler-Briggs & Stratton 496652
Deflector-Briggs & Stratton 222573
Screw-Briggs & Stratton 93705
Muffler Adaptor Pipe
Screw-Cap .31-18 x .75
Gasket
Belt-5L x 47.1 Engine to Jackshaft
Muffler Guard (307)
Screw-Tapping .250-20 x .37 (307)
14
PE0392
ENGINE, EXHAUST AND BELTS
Model 915014, 018
1
13
14
4
3
11
12
16
2
MACHINE
BACK
6
5
10
15
7
9
8
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
08259200
08259100
05952400
06437500
06530200
01557700
06602600
06443600
05965700
06309300
07212300
03493200
03493100
01523400
07517300
07235700
01557000
Qty.
1
1
4
4
4
1
1
1
1
1
1
1
1
1
1
1
1
PE0660
Description
Engine, Briggs & Stratton Intek 20HP V Twin (014)
Engine, Briggs & Stratton Intek 18HP V Twin (018)
Nut-Locking .312-18
Engine Sheave 4.50
Key-Square .25 x 2.50 x .25
Washer-Special .469 x 2.000 x .250
V-Belt, Transmission Drive
Cock, Oil Drain
Adapter, Oil Drain
Tube, Oil Drain
Cable Tie
Belt-5L x 47.1 Engine to Jackshaft
Muffler Assembly
15
IDLERS
Model 915013, 014, 017, 018, 307
1
3
2
1
2
MACHINE
BACK
3
14
4
4
26
9
8
20
17
14
18
16
5
5
26
19
9
6
21
22
24
21
23
15
26
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Qty.
2
4
3
4
3
2
1
1
3
1
1
1
1
1
4
1
1
2
2
1
1
2
2
1
1
1
3
13
10
14
17
25
06536300
06442000
06529600
06529400
08336100
05965400
05964100
01557200
07012600
01582700
05970400
05958400
07324700
01544100
06436200
01557300
01557400
06537200
07324600
06445500
05958500
06215300
01548400
06436900
05702600
05962300
06442300
5
11
18
1
2
3
4
5
6
7
8
9
10
11
9
2
2
7
Item Part No.
4
Description
Nut-Locking, Center .50-13
Washer-Flat, Steel .563 x 1.38 x .109
Nut-Locking, Center .38-16
Nut-Hex .38-16
Spring-Extension
Spacer-Idler Arm
Fitting-Lube .25-20 x .256
Weldment-Idler Arm
Bolt-Hex .38-16 x 4.50 (014)
Bolt-Hex .38-16 x 2.50 (013, 017, 018, 307)
Idler-4.0 inch Diameter
Spacer-Idler 48 inch (014)
Washer-Flat, Steel .406 x .812 x .065
Idler Arm Weldment Transaxle
Weldment-Jackshaft Idler Arm
Nut-Jam Lock .38-16
Idler-3.5 inch Diameter
Washer-Hardened
Bolt-Hex .38-16 x 1.75 Grade5
Bolt-Round Head Square Shank .38-16 x 1.50
Spacer-Idler
Ring-Retaining External .875 x .042
Washer-Flat-Steel .250 x .562 x .049
16
4
12
6
14
PE0402
FRAME
Model 915013, 014, 017, 018, 307
1
5
2
15
6
4
12
16
14
20
4
5
25
3
21
19
11
19
18
10
7
17
9
22
11
2
24
13
23
3
20
26 5
8
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
01553559
01562859
05947000
06529800
05948700
06529600
01541200
01553759
07509400
05946800
06531000
06529700
06530200
06220800
01557851
01550059
01552851
01538059
06223900
01554351
01526759
05947000
06220600
06435700
06436200
06216100
01533400
06537500
03657100
07049200
06536000
Qty.
1
1
6
6
2
5
1
1
1
2
2
4
9
5
1
1
1
1
3
1
1
2
2
9
4
2
1
1
1
2
2
19
11
Description
Hitch-Trailer (013, 014, 018, 307)
Bracket, Trailer Hitch (017)
Brace
Frame
Grip
Nut-Locking-Nylon .250-20 Grade 2 (014, 018, 307)
Nut-Locking-Center .250-20 Grade 2 (013, 017)
Bolt-Round Head Square Short Neck .31-18 x .75 Grade 5 (014, 018, 307)
Clutch Stop
Shroud-Footrest (014, 018, 307)
Weldment-Footrest (014, 018, 307)
Footrest (013, 017)
Bolt-Round Head Square Neck .38-16 x .75 Grade 5
Bracket-Footrest (014, 018, 307)
Bracket-Footrest (013, 017)
Bolt-Hex .31-18 x .75 Grade 5 (014, 018, 307)
Bolt-Round Head Square Neck .25-20 x .50 Grade 5 (013, 017)
Washer-Flat-Steel .375 x .875 x .083 (014, 018, 307)
Bolt-Round Head Square Neck .312-18 x 1.00 Grade 5 (014, 018, 307)
Rod-Battery
Nut-Locking-Wing .250-20
Switch-Single Pole N.O.
Bolt-Hex 10-24 x .75 Flat Washer Head
Nut-Locking-Nylon 10-24 with Insert
17
PE0411
SEAT AND SUPPORT
Model 915013, 014, 017, 018, 307
20
20
20
1
2
5
4
18
17
19
8
6
3
7
12
15
6
14
9
15
13
11
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
01546100
00571600
00571500
06534800
07028500
05710200
01168900
01554451
01555459
05947900
01556259
01553659
05948700
06529600
05521100
07414400
06308600
06437200
05946900
78707800
01552900
01553100
01553000
01553200
Qty.
1
2
2
2
2
2
1
1
1
2
1
1
4
4
2
2
4
4
4
1
2
1
1
1
10
16
Description
Seat
Spring-Compression 2.9L x 2.02 OD
Boot-Seat Spring
Nut-Locking, Flange .375-16
Bolt-Hex Flanged Whiz Lock Head .38-16 x .75
Ring-Retaining-External .500 x .042
Axle-Front
Plate-Seat
Plate
Panel-Weldment
Support-Seat Weldment
Nut-Locking .375-16 Grade A
Bushing-Flange
Screw, Tapping .31-18 x .75
Arm Rest Kit
Arm Rest
Bracket-Left Hand Armrest
Bracket-Right Hand Armrest
Hardware Pack, Armrest Kit
18
PE0420
FUEL TANK
Model 915013, 014, 017, 018, 307
5
6
2
3
1
4
7
9
10
8
PE0430
Item Part No.
1
2
3
4
5
6
7
8
9
10
06939100
01559700
01559600
07511400
09239500
01551300
01555000
05947000
06308600
06435700
Qty.
2
1
1
1
1
1
1
4
4
4
Description
Clamp-Hose-Wire .490/.510 x .116
Hose-Fuel .25 I.D. x 17.5” Long
Fitting-Tank
Bushing
Cap-Fuel
Fuel-Tank
Plug-Button
19
FRONT AXLE
Model 915013, 014, 017, 018, 307
9
19
9
8
21
8
20
2
9
4
8
7
6
2
5
7
10
3
18
11
14
1
16
15
12
17
13
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
01542959
05520100
07012600
01584959
05522000
05522700
06443400
06223900
06529600
01547059
05964400
09105200
07144100
07145200
07145300
07145400
06536300
05957900
05958000
06308800
06441700
Qty.
1
4
2
1
1
1
2
6
7
2
2
2
2
1
1
1
2
1
2
2
2
Description
Axle Weldment
Bushing-Flange 1.020 x 1.385 x .75 x 1.75
Axle Frame Weldment
Bushing-Sleeve .626 x 1.000 x .524
Bushing-Sleeve .377 x .623 x .775
Fork-Caster
Bolt-Hex .50-13 x 6.50
Bushing-Caster Fork
Wheel & Tire 11 x 4.00-5 (Contains Items 16-18)
Rim Assembly
Tire
Bearing
Nut-Locking-Center .50-13 Grade 5
20
PE0023
BUMPERS
Model 915013, 014, 017, 018, 307
2
1
4
3
6
12
8
17
9
12
11
15 16
13
7
19
14
18
5
11
2
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
10
9
06530200
07414400
06437200
05947000
01555559
01554159
01552759
01551459
01555100
01555751
06535800
06223600
01558800
01558751
08325900
06441900
05802900
05948700
06444000
PE0460
Qty.
4
4
4
4
1
1
1
1
2
1
4
4
1
1
1
1
1
1
2
Description
Nut-Locking-Nylon .312-18 Grade 5
Screw-Tapping .312-18 x .75 Grade 5
Bracket-Rail Support-Right Hand (014, 018, 307)
Bracket-Rail Support-Left Hand (014, 018, 307)
Rail-Side-Right Hand (014, 018, 307)
Rail-Side-Left Hand (014, 018, 307)
Cap-Sleeve (014, 018, 307)
Weldment-Bumper 014, 018, 307)
Bolt-Round Head Square Neck .375-16 x 1.00 Grade 5 (014, 018, 307)
Pin-Index
Bracket-Stop
Spring-Compression
Pin-Roll .156 x 1.00
Washer-Flat-Steel .406 x 1.00 x .188 (013, 017)
21
COVER ASSEMBLY, SOLENOID AND SWITCHES
Model 915013, 014, 017, 018, 307
7
1
17
15
2
16
28
9
3
5
6
14
4
4
11
25
24
23
22
21
13
26
4
12
27
10
9
4
18
19
9
20
8
31
29
33
32
31
30
PE0441
22
COVER ASSEMBLY, SOLENOID AND SWITCHES
Model 915013, 014, 017, 018, 307
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Qty.
01549351 1
01553459 1
05947000 2
06530200 10
01555200 5
07415800 5
07010500 3
01553359 1
05947000 8
01554051 1
01553851 1
01553951 1
07414400 4
01555300 5
01528500 1
08704700 1
06804400 3
03602300 1
06942100 1
06942200 1
06536000 1
06310900 1
06517400 1
07517700 1
02460700 1
06942300 1
00529900 1
01545600 1
06116700 2
06437200 2
03679000 1
05947900 2
06529700 2
06310500 2
06536700 2
Description
Shroud, Top (013, 014, 018, 307)
Shroud, Side Left Hand
Nut-Locking-Nylon .312-18
Snap-Cap Top Cap
Screw-Tapping 10-24 x .50
Rivet-Burr .125 x .505 x.048 (013, 014, 018, 307)
Shroud-Side Right Hand
Bracket-Control
Bracket-Hood (013, 014, 018, 307)
Bracket-Fuel Tank
Screw-Tapping .312-18 x .75 Hex Washer Head
Snap-Cap Washer
Cupholder
Latch, Flexible (013, 014, 018, 307)
Rivet-Pop .125 x .357 Dome (013, 014, 018, 307)
Key Switch
Cable-Throttle (014, 018)
Cable-Throttle (013, 017, 307)
Nut-Locking-Nylon 10-24
Washer-Lock-Internal .563 x .040
Nut-Panel .562-24
Cap-Ignition Switch
Key with Cap
Cable-Choke (014, 018)
Plug-Hole Plastic .44 (013, 017, 307)
Switch-Clutch
Screw-Machine 10-24 x .50
Solenoid
Bolt-Hex .25-20 x .50
Washer-Lock-Internal .31
Nut-Jam .312-24
23
CONTROLS
Model 915013, 014, 017, 018, 307
51
2
52
9
2
51
11
4
3
5
53
7
6
29
8
28
61
57
6
27
56
25
26
54
1
54
55
55
61
27
29
62
45
21
38
53
31
30
44 57
56
18
32
21
33
12
16
14
35
50
10
29
49
41
29
17
39
43
22
13
20
40
43
18
15
44
42
27
24
27
25
24
23
28
45
37
28
41
47
36
36
34
46
24
25
27
24
48
28
25
48
58
37
25
29
18
21
19
11
28
11
27
29
60
59
PE0292
Item Part No.
1
2
3
4
5
6
7
01547200
09246800
01547300
01538900
01538800
00510500
00515700
Qty.
1
2
1
1
1
4
4
Description
Weldment-Lever Right Hand
Grip-Handlebar
Weldment-Lever Left Hand
Weldment-Rod Left Hand
Weldment-Tube Right Hand
Bushing-Nylon .5 x .625 x .5
Washer-Plastic .12 x .53 x 1.12
24
CONTROLS
Model 915013, 014, 017, 018, 307
Item Part No.
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
00516200
06528200
06530000
06442000
01539700
01525500
05947900
05946800
06437300
06529700
06529600
09107200
05408000
06436200
05963300
01539900
06536700
01542600
01542500
06437200
05946900
06529800
01539000
09107400
08831500
05961400
01539800
08320200
01541100
06608600
08333400
01526100
07015100
01522000
05947000
07012600
05957800
06529400
01542800
01542700
06446900
05957400
06529200
00568700
09211400
06216100
06435700
06530400
06307200
06304000
05960600
01556900
06530200
06529500
06439100
Qty.
Description
2
2
2
10
2
2
4
4
4
4
6
2
2
6
2
1
4
6
2
8
4
18
2
2
2
2
1
2
2
2
2
2
2
4
4
4
4
6
AR
AR
2
2
2
2
2
4
4
4
2
2
2
2
2
3
1
Spring-Compression
Nut-Locking Cone .50-13
Washer-Flat, Steel .563 x 1.375 x .109
Arm-Speed Control
Arm-Speed Control
Washer-Flat Steel .281 x .620 x .065
Hub-Bearing Mount
Washer-Flat, Steel .406 x .812 x .065
Rod-Transaxle Right Hand
Nut-Jam .31-24
Rod-End-Female .312
Rod
Rod-Pivot
Weldment-Neutral Detent
Bushing-Sleeve .385 x .610 x 1.80
Rod-Transaxle Left Hand
Spring, Tension .085 x .60 x 5.13
Weldment-Pump
Key-Woodruff .13 x .75
Spring
Switch-Neutral
Nut-Stamped .56-18
Bushing-Flanged
Bolt-Hex .38-16 x 3.00
Nut-Hex .375-16 Grade 2
Rod Assembly-Transaxle Right Hand (Contains Item 23 & two each of Items 24 & 25)
Rod Assembly-Transaxle Left Hand (Contains Item 34 & two each of Items 24 & 25)
Bolt-Hex .31-18 x .75
Nut-Hex .31-18
Handlebar-Large Frame
Cap Plug-Handlebar
Bolt-Round Head Square Neck .31-18 x 1.00 Grade 5
Nut-Locking-Flange .31-18
Washer-Locking-External .326 x .599 x .031
Washer-Locking-Internal .438
Eccentric
Nut-Hex .31-24
Washer-Flat-Steel .38 x 87 x .179
25
ATTACHMENT LIFT
Model 915013, 014, 017, 018, 307
13
14
21
20
15
11
12
1
22
18
19
20
16
7
4
3
2
10
4
23
2
3
10
6
9
8
5
17
24
PE0451
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
01556500
05520100
06443000
06712800
01558651
01556151
06529700
08309900
06533200
05967100
06529600
01554700
01554251
08313300
01554500
01556451
01554600
01556351
05973900
05947500
06530200
05948700
06223900
06223600
06542000
Qty.
1
2
3
2
1
1
1
2
1
1
4
1
1
1
1
1
2
1
1
2
3
2
2
2
2
Description
Detent Plate
Bushing-Flange 1.020 x 1.385 x .75 x 1.75
Washer-Flat-Steel 1.062 x 2.000 x .134
Pin-Cotter .188 x 1.50
Lift Lever Weldment (014)
Lift Lever Weldment (013, 017, 018, 307)
Spring-Tension .092 x .69 x 1.75
Nut-Hex .25-20
Weldment-Release
Bracket-LIft
Spring-Tension
Spacer .328 x .462 x 3.14
Handle-Deck Lift
Spacer .328 x .462 x .41
Bracket-Handle
Nut-Locking-Top Flange .38-16
26
HANGER ARM (48” DECKS ONLY)
Model 915014
2
4
4
5
7
6
8
14
1
13
17
12
11
10
12
15
9
3
9
16
12
12
17
12
PE0111
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Qty.
06711900 2
05959400 4
06535300 2
01519500 2
06529600 4
01563300 2
01587451 1
01587251 1
06442800 4
01535900 1
01587551 1
06430200 12
07030000 2
06535900 2
01587351 1
06712300 1
06944800 4
Description
Pin-Hair External .12 x .31 x 2.37
Rear Hanger
Weldment, Adjustment Link
Hanger, Rear Left Hand
Arm, Lift Left Hand
Pin
Hanger, Rear Right Hand
Hanger
Nut-Jam .375-16
Arm, Lift Right Hand
Clip, Spring
27
CONTINUITY DIAGRAM
Model 915013, 014, 017, 018, 307
The diagrams below show the various states of connection for electrical components.
The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
Key Switch
Relay
(03602300)
(03042800)
A
A
S2
A
S2
S1
B
87
S2
S1
B
S1
B
86 87A
M
G
G
M
87
85
30
OFF
RUN
85
30
START
NOT ENERGIZED
PTO Switch
ENERGIZED
Neutral Switch
(01526100)
(01545600)
3
9
3
9
1
4
1
7
4
DISENGAGED
(down position)
1
7
2
STEERING LEVER
IN POSITION
(button up)
ENGAGED
(up position)
Seat Switch
Brake Switch
(03654200)
(03657100)
1
86 87A
G
M
2
1
2
STEERING LEVER
OUT POSITION
(button down)
2
1
OPERATOR
OFF SEAT
1
2
DISENGAGED
(button down)
OPERATOR
ON SEAT
1
2
ENGAGED
(button up)
Solenoid
(03679000)
NOT ENERGIZED
ENERGIZED
PE0521
28
WIRING DIAGRAM
Model 915013, 014, 017, 018, 307
SEAT / PTO RELAY
10
SEAT
SWITCH
9
HEADLIGHTS
30
PINK
86
BLACK
87a
2
87
BLACK
BLACK
4
3
RED / YELLOW
BLACK
OPTIONAL
2
1
85
HOUR
METER
PTO
SWITCH
7
4
2
1
3
PURPLE
PTO
CLUTCH
PURPLE /
WHITE
1
15
OPTIONAL
BLACK
BRAKE
SWITCH
PURPLE
REGULATOR
2
RED / YELLOW
FUEL SOLENIOD
ENGINE
START
RELAY
BROWN / YELLOW
9
1
1
30
BLACK
87
BLACK
12
A
B
RED
B
RED
FUSE
30A
8
6
M
17
BATTERY
A
RED / VIOLET
RED
BLACK
7
87a
RED / YELLOW
STARTER
86
WHITE / BLACK
BLACK
G
BLACK
16
COIL 1
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
03602300
03492700
01545600
01563200
03357900
03643100
01554800
03621100
02743300
02727900
03042800
03654200
01526100
05246000
03081700
07517700
03657100
03679000
03111100
Qty.
1
1
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
1
2
85
11
9
1
13
RIGHT HAND
NEUTRAL
SWITCH
2
RED / VIOLET
1
STARTER
SOLENOID
BLACK
LEFT HAND
NEUTRAL
SWITCH
S1
BROWN
COIL 2
BLACK
WHITE
MAGNETO KILL
5
S2
KEY
SWITCH
14
Description
Key Switch
Hour Meter (Optional)
Switch-Clutch
Harness-Wiring
Clutch / Brake-Electric (014)
Clutch / Brake-Electric (013, 017, 018, 307)
Battery with Tube (013, 014)
Battery with Tube (306, 307)
Start Cable
Starter Cable
Relay
Switch-Seat
Switch-Neutral
30 AMP Fuse
Plug-Molded Diode
Cap-Ignition Switch
Switch-Brake
Solenoid
Ground Cable
29
PE0531
42” MOWER DECK
Model 915013, 017, 018, 307
4
7
3
21
1
2
8
5
26
23
10
20
22
12
23
15
6
24
13
16
25
19
9
14
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Qty.
51503800 1
51504000 1
01584251 1
01585300 1
01585200 1
05948700 2
06529600 2
07411500 14
06543100 4
06529800 3
01584351 1
01584451 1
01585500 1
02709551 1
06219900 2
06530100 2
05706300 1
08307200 1
02202900 1
03624200 1
01582651 1
06535800 2
05947000 2
06529800 2
06215700 3
06435700 2
05959400 2
18
17
24
11
Description
Mower-42” Ariens EZR with Decals
Mower-42” Ariens EZR Assembly Complete
Reinforcement-Deck
Cover-Deck Reinforcement
Cover-Deck Reinforcement
Bolt-Hex .38-16 x 1.00
Screw-Tapping Hex Washer Head Thread Rolling .31-18 x .50
Nut-Locking-Top-Flange .31-18
Nut-Lock-Center .31-18
Weldment-Baffle Upper Left Hand
Weldment-Baffle Upper Right Hand
Deflector-Chute 42”
Hinge-Plate
Bolt-Round Head Square Neck .25-20 x .75
Nut-Locking-Flange .250-20
Ring-Retainig-External .312 x .025
Spring-Torsion .095 x .50 x 1.00
Bushing
Pin
Deflector-Baffle
Bolt-Hex .31-18 x .75
Bolt-Hex .38-16 x .75
30
PE0542
42” MOWER BRACKETS AND ROLLERS
Model 915013, 017, 018, 307
2
15
9
21
20
6
8
21
22
2
7
14
17
13
17
6
11
7
1
6
16
6
3
5
8
1
19
18
22
14
13
10
12
4
2
PE0621
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Qty.
06529600 4
06223900 8
06442000 3
05943100 2
06816300 4
06436600 12
06944800 8
06711900 4
01583451 2
01583651 2
01563300 2
01582300 2
01585100 4
03471700 4
01583951 2
05961900 4
06519700 8
06816200 4
06713500 4
06535800 4
06816400 4
01586700 2
Description
Bolt Round Head Square Neck .38-16
Pin-Clevis .50 x 1.38
Clip-Spring
Pin-Hair-External .12 x .31 x 2.37
Link-Lift
Bracket-Lift
Link-Adjustment
Trunnion
Bracket-Roller Bracket Adjustment
Wheel 5” x 3”
Weldment-Deck Stop Bracket
Bolt-Hex .50-13 x 4.00
Nut-Locking-Center-Jam .50-13
Pin-Hair Internal .08 x .18 x 1.18
Reforcement, Deck Lift
31
42” MOWER SPINDLE
Model 915013, 017, 018, 307
1
2
4
50
3
6
26
4
8
7
2
25
9
12
16
19
12
23
10
21
15
11
52
12
7
11
7
22
20
14
8
37
24
13
37
49
14
50
41
40
8
41
40
50
17
29 33
5
31
28
34
47
32
27
35
48
36
36
40
44
17
38
39
46
32
53
47
40
42
43
42
43
45
18
48
30
35
51
44
45
46
PE0551
42” MOWER SPINDLE
Model 915013, 017, 018, 307
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
06530300
06436100
01583100
05435100
06215700
01587700
06529800
01583700
01582951
07320800
06537200
06542000
01583200
06223800
06435900
06529600
06224100
06223900
08335700
01583300
06435900
07030000
01583000
06535800
07237500
07237400
05947400
08321700
01583500
01586800
01584600
06435800
06531000
06536300
06442000
01583800
01582400
06542000
06604200
00341900
06444200
01582100
01582200
01586200
01585000
06310300
06537700
06944800
06441900
06534800
06216100
05533100
01582000
06540600
Qty.
1
2
1
2
4
1
13
3
1
1
3
3
1
2
1
1
10
1
1
1
1
1
1
1
1
1
2
2
2
1
1
2
2
1
2
2
2
8
2
4
2
2
2
2
2
2
2
2
2
1
9
1
1
1
Description
Spacer .64 x .88 x 4.07
Bearing .625 x 1.37 x .43
Jackshaft
Nut-Locking-Center.31-18
Sprocket-Drive
Weldment-Plate Mount
Assembly-Idler Pulley
Nut-Locking-Jam-Center .38-16
Arm-Idler
Bolt Round Head Square Neck .38-16 x 1.75 Grade5
Nut, Locking-Center .38-16
Bolt-Round-Head Square Neck .38-16 x 1.25 Grade 5
Bolt-Round-Head Square Neck .38-16 x .75 Grade 5
Spring-Compression .125 x .78 x 1.25
Bracket-Belt Adjustment
Bolt-Eye .375-16 x 2.50
Spacer .39 x .50 x .86
Belt-Cog
Belt-V A-RMA
Spring-Compression .058 x .68 x .75
Retainer-Brace
Weldment-Front Mount
Rod Link
Nut-Locking-Center ..50-13
Assembly-Spindle Housing
Weldment-Spindle Shaft
Key Woodruff .188 x .625 x .31
Bearing-Slinger
Hub-Retainer
Tray-Blade
Blade, Mulch 22" (013, 017, 018)
Blade-22” Low Lift-CE (307)
Nut-Jam .75-10
Clip-Spring
Nut-Locking-Flange Grade.A .375-16
Bolt-Round-Head Square Neck .31-18 x 1.00 Grade 5
Spacer .803 x 1.09 x .877
33
48” MOWER SPINDLE
Model 915014
2
11
10
9
8
9
12
8
13
14
19
15
7
37
1
11
3
13
33
39
3
6
16
5
32
13
17
4
18
36
19
5
30
31
38
32
29
28
34
19
20
27
15
3
26
21
23
22
13
24
17
20
21
8
22
9
24
8
9
34
PE0501
48” MOWER SPINDLE
Model 915014
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Qty.
07234500 1
07234400 1
06223900 13
03434951 1
06436200 2
06529600 1
01543300 1
06310300 6
06537700 6
07012500 1
07012600 3
03401800 2
05412000 6
53115100 2
06601400 5
03433500 2
06444100 3
03433600 4
06542000 13
00341900 3
03037500 3
03485500 3
06601700 1
03123700 3
06444200 1
53402400 1
05947200 1
03418851 1
06529800 1
08301800 1
03433900 1
06706900 3
00542700 1
06536300 1
06436600 1
03433751 1
05966600 1
07006300 1
03114500 1
03433800 1
Description
Belt, 48" Clutch to Deck
Belt, 48" Deck
Housing, Spindle
Sheave, 48" Deck
Nut-Jam .75-10
Fitting, Lube .125
Fitting, Lube .25-28 x .256
Sheave
Spindle Shaft w/Zerk
Key-Woodruff .188 x .62 x .25
Spindle Housing
Spacer, Spindle
Bearing Slinger
Retainer Hub
Blade Tray 48
Key-Square .188 x .625 x .188
Blade
Spindle Shaft with Zerk & Key
Bracket
Spring-Compression .106 x .63 x 12.0
Rod-Idler Spring
Idler-Plastic 4.75 OD x .50 ID
Idler Arm w/Zerk
Bolt-Button Head .38-16 x 1.25 Grade 5
Spacer-Flanged .390 x .500 x .781 x .875
Spacer, Pivot
35
48” MOWER PAN
Model 915014
18
24
26
12
25
7
20
21
30
13
12
9
6
12
7
23
17
38
10
12
19
12
16
15
39
16
15
14
3
5
12
12
43
1
6
4
20
6
9
6
21
50
12
31
30
2
28
29
8
6
6
22
43
34
27
33
32
34
12
16
14
16
15
45
19
13
6
36
48
40
49
35
14
46
16
44
42
47
15
35
41
37
15
13
16 15
6
PE0511
Item
1
2
3
4
5
6
7
8
9
Part No.
Qty. Description
53401700 1
01521251 1
03435151 1
03114100 1
03435200 1
06215700 23
06529800 6
06224600 2
06536300 3
Mower Pan Head w/Decals 48" (014)
Front Hanger
Bracket, Roller
Roller
Roller Shaft
Bolt-Round Head Square Neck .50-13 x .75 - Short Neck
36
48” MOWER PAN
Model 915014
Item Part No.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
01535659
06214100
06543100
02745400
05960900
06435700
06529600
01535359
03095859
03095959
07012600
06529200
06308600
06223500
01535851
01521651
01521451
01535751
05947100
03405800
05947000
06436200
06706900
03034959
00318559
06529700
06220600
01535459
06224400
06306500
06529400
03434251
03434351
06437300
06212100
06216100
01535559
01534659
06712700
06436100
05504700
01528751
Qty.
1
19
27
4
4
8
6
1
1
1
2
4
4
2
1
1
1
1
1
1
2
3
1
1
1
16
16
1
1
1
1
1
7
7
3
2
1
2
2
2
4
2
Description
Weldment-Left Front
Roller
Bracket-Left Rear
Belt Cover Right Hand 48"
Belt Cover Left Hand 48”
Nut-Locking .312-18
Bolt-Round Head Square Neck .31-18 x 3.25
Left Hand Rear Hanger
Left Hand Rear Hanger Support
Right Hand Rear Hanger Support
Right Hand Rear Hanger
Hinge Pin
Chute Extension
Flat Spring
Weldment-Right Rear
Nut-Hex .375-16
Baffle
Baffle Tab
Weldment-Right Front
Caster Fork Weldment
Mower Adjustment Tab
37
Ariens Company
655 West Ryan Street
P.O. Box 157
Brillion, WI 54110-0157
920-756-2141
Fax 920-756-2407
www.ariens.com

EZR Zero Turn Mower

Transcription

Similar documents

Promaster 144Z, 148Z, 152Z, 160Z