ADQ-22/23 series
Transcription
ADQ-22/23 series
ALLDAQ – Your partner for measurement and automation Well filtered and isolated! ADQ-23 with 8 SPDT relays max. 35 V/1 A (AC/DC) 8 SPDT relays Isolated digital outputs Up AAper Uptoto0.6 0.7 peroutput output Isolated inputs with filter and interrupt function 78-pin D-Sub connector 8 TTL digital I/Os Software streaming for continuous input/output ADQ-22/23 Series Digital I/O boards with isolated digital inputs and outputs, 8 TTL digital I/Os, opt. 8 SPDT relays Well filtered and isolated = perfectly for industrial applications! The boards of the ALLDAQ ADQ-22/23 series are digital I/O boards for use in industrial automation and control environments. Alternatively models for CompactPCI Serial and standard PCI Express bus are provided. Beside the obligatory isolation these boards also offer the possibility to program a digital filter per input port, e. g. for protection against bouncing. Additionally parasitic effects between field wiring and PC can be suppressed efficiently by an electrical isolation of 500 VACRMS. 32 (ADQ-22) resp. 24 (ADQ-23) isolated digital inputs and 32 (ADQ-22) resp. 16 (ADQ-23) digital outputs are available. The streaming operation enables the continuous sampling of all digital inputs resp. streaming a bit-pattern to all digital outputs up to 1 kHz. The ADQ-23 provides 8 SPDT relays (35 V/1 A). The isolated inputs have a Schmitt trigger characteristic according to IEC 61131-2 (type 1) and are designed for a maximum input voltage of 35 V. All isolated inputs are assembled with status LEDs and can generate an interrupt on bit-pattern change, bit-pattern match or missing external supply. The isolated outputs can drive up to 0.6 A. To increase the output current connecting the outputs in parallel is possible. This implies that no external drivers are necessary for many applications. For powering the outputs an external power supply in the range of 11..35 V with sufficient power must be provided. The output buffers come with a thermal overload protection, current limitation, short-circuit protection and an under-voltage monitoring. Maistraße 2 - D-82110 Germering, Phone: +49 (0)89 / 894 222 74, Fax: +49 (0)89 / 894 222 33, Email: [email protected] alldaq.com ADQ-22/23 Series – Isolated Digital I/O Boards Specifications ADQ-22-PCIe / ADQ-22-cPCIS Isolated digital inputs Number of ports Isolation Voltage level Digital filter Interrupt mode External supply VEXT_DI Isolated digital outputs / Relays Number of ports Isolation Voltage level Output current Over-load protection External supply VEXT_DO Relays TTL digital I/Os Number of ports Level General Streaming mode Power consumption PCIe Power consumption cPCIS Environment Certifications PC interface (depends on model) ADQ-23-PCIe / ADQ-23-cPCIS 2 x 16 bit (status LEDs per channel) 3 x 8 bit (status LEDs per channel) up to 500 VAC isolated according to EN60664-1, UL1577 Threshold voltage L → H: max. 15 V @ VEXT_DI=24 V Threshold voltage H → L: min. 11 V @ VEXT_DI=24 V Programmable filter: 10 ms / 3.2 ms / 1 ms / 10 µs (bypass) Generation of an interrupt event on bit-pattern change or bit-pattern match possible, as well as on undervoltage at VEXT_DI < 12.1 V VEXT_DI: 9.6…35 V, typ. 24 V 2 x 16 bit 2 x 8 bit up to 500 VAC isolated Output high level: UOH = 11..35 V according to IEC 61131-2 (type 1) max. 0.6 A per channel, parallel switching possible Current limitation per channel, wide over-load protection per port, IRQ, error LED on-board 11..35 V, typ. 24 V; current on full load: 19.2 A 11..35 V, typ. 24 V; current on full load: 9.6 A – 8 SPDT relays (type C), 35 V/1 A (DC/AC) 1 x 8 bit bi-directional (direction per port programmable) 3.3 V or 5 V switchable (TTL compatible); IO = 10 mA / channel Software-controlled streaming operation for continuous I/O operation at each digital port up to 1 kHz (depending on operating system and computer configuration) +3.3 V via slot: typ. 450 mA (quiescent current) +5 V via Molex connector: max. 1 A (incl. load via VCC_OUT) +12 V via backplane: typ. 0.6 A including load at VCC_OUT of max. 1 A Temperature operation: 0..70 °C Humidity operation: 20%..55% (not condensing) EMC Directive 2004/108/EG, emission EN 55022, noise immunity EN 50082-2, RoHS Dimensions (without mounting bracket and connector) Connectors PCIe-Versionen: PCI-Express x1 Rev. 1.0a cPCIS-Versionen: CompactPCI Serial Rev. 1.0a ADQ-22/23-PCIe: 158 mm x 111,15 mm (W x H) ADQ-22/23-cPCIS: 3 U CompactPCI Serial board 78-pin D-Sub female connector, 25-pin D-Sub female connector via adapter cable Manufacturer warranty 36 months ALLDAQ - Your partner for measurement and automation. ADQ-22/23 Series – Isolated Digital I/O Boards Opto isolated up to 500 V DI Port A DI_A15…0 Digital filter GND_EXT DO Port C 78-pin D-Sub female connector DI Port B Bit-pattern match Bit-pattern change DI_B15…0 Digital filter GND_EXT DI Port A Bit-pattern match Bit-pattern change IRQ DO_C15…0 DI Port B Current limitation per channel IRQ DI Port C Control and interrupt logic VEXT_DO DO Port D DO_D15…0 Temperature monitoring IRQ DO Port E 16 bit output port GND_EXT DI_B7…0 Current limitation per channel 8 bit digital input Bit-pattern match Bit-pattern change Digital filter GND_EXT IRQ 16 bit output port GND_EXT Digital filter 8 bit input port VEXT_DI VEXT_DO Temperature monitoring DI_A7…0 GND_EXT 16 bit digital input 16 bit input port ADQ-23 Opto isolated up to 500 V 16 bit digital input 16 bit input port VEXT_DI ADQ-22 78-pin D-Sub female connector Block Diagram 8 bit digital input Bit-pattern match Bit-pattern change 8 bit input port DI_C7…0 Digital filter GND_EXT IRQ IRQ 8 bit digital input Bit-pattern match Bit-pattern change 8 bit input port IRQ VEXT_DO Temperature monitoring DO_E7…0 IRQ 8 bit output port GND_EXT Current limitation per channel Control and interrupt logic Address-/ data bus NO_x CO_x PCI Express interface TTL-I/Os DIO_G7…0 IDC connector / Relais Port D DIO Port G CompactPCI Serial Current limitation per channel NC_x 25-pin D-Sub female VCC_OUT (+5 V) Interrupt IRQ 8 bit output port GND_EXT (1 x 8 bit port) GND_PC Address-/ data bus VCC_OUT (+5 V) CompactPCI Serial Software Support / Interrupt Molex connector (1 x 8 bit port) GND_PC Temperature monitoring DO_F7…0 PCI Express interface ALLDAQ Manager • Drivers for Windows 10 / 8.1 / 8 / 7 / Vista SP2 (32 and 64 bit) • Informations on the installed ALLDAQ hardware in overview • API with a unique programming logic • XML export of the driver configuration for archiving and support • Programming support (SDK) with examples for C++, C#, Visual Basic, Delphi/Pascal and Python included • Tool for interactive illustration of the pin-assignment with the possibility to generate a PDF file • ALLDAQ Manager - Utility software offers a quick overview of parameters of the ALLDAQ driver system and offers a central access to the SDK, software tools and help files • Tool for user calibration Do you need further software support - also for third-party manufacturer? Our software specialists like to advice you! Remote Access via Ethernet (+5V for PCI Express) TTL-I/Os Molex connector DIO_E7…0 (+5V for PCI Express) DO Port F IDC connector DIO Port E 25-pin D-Sub female VEXT_DO NEW! The newest extension of the ADQ driver system enables the easy access to your ALLDAQ hardware via the local network (LAN). The programming is done as usual by the standard-API functions. LabVIEW™ VIs For LabVIEW™ users we provide a library with virtual instruments (VIs) for easy access to your ALLDAQ hardware. • Convenient access to the software developer kit (SDK) for highlevel language programming with examples and simple test programs as well as to the help files 192.168.1.1 Remote PC (measuring system) Coming soon! Host PC MATLAB® Support An adapted MATLAB® interface for the ALLDAQ hardware with examples and a help file is included with the ALLDAQ SDK. Maistraße 2 - D-82110 Germering, Phone: +49 (0)89 / 894 222 74, Fax: +49 (0)89 / 894 222 33, Email: [email protected] alldaq.com ADQ-22/23 Series – Isolated Digital I/O Boards Complete Solutions Bundle Offerings Everything from one source. Complete systems for measurement and control in a compact desktop housing or for mounting in a 19“ rack. Alternatively with a bus extension or with an independent slot CPU. Contact us for our attractive bundle offerings. TOP! Figure: ADQ-10-cPCI incl. 37-pin cable and 37-pin terminal block Ordering Info Accessories (optional): Shielded cables (see ordering infos) Package Content ADQ-22-PCIe (Art. No. 115549) or ADQ-22-cPCIS (Art. No. 115550) or ADQ-23-PCIe (Art. No. 115551) or ADQ-23-cPCIS (Art. No. 115552) PDF PDF ADQ 25-pin terminal block (111752) 25-pin D-Sub male connector (Art. No. 112353) 78-pin D-Sub male connector (Art. No. 112355) 78-pin terminal block (111751) Adapter cable with mounting bracket from 20-pin IDC connector to 25-pin D-Sub female connector ADQ-AP-D25F-cPCI (Art. No. 111755) or ADQ-AP-D25F-PCIe (Art. No. 111756) Documentation and driver software are provided by download under: www.alldaq.com/downloads. Name Art. No. Description ADQ-22-PCIe 115549 PCI Express digital I/O board, 32 isolated DIs with filter, 32 isolated DOs, 8 TTL DIOs ADQ-22-cPCIS 115550 CompactPCI Serial digital I/O board, 32 isolated DIs with filter, 32 isolated DOs, 8 TTL DIOs ADQ-23-PCIe 115551 PCIe digital I/O board, 24 isolated DIs with filter, 16 isolated DOs, 8 relays (type C), 8 TTL DIOs ADQ-23-cPCIS 115552 CompactPCI Serial digital I/O board, 24 isolated DIs with filter, 16 isolated DOs, 8 relays (type C), 8 TTL DIOs 111752 Cable shielded from 25-pin D-Sub male connector to 25-pin D-Sub-D female connector, length: 1.8 m Suitable accessory ADQ-CR-D25M-D25F-1,8m ADQ-CR-D78M-D78F-1,5m 111754 Cable shielded from 78-pin D-Sub male connector to 78-pin D-Sub female connector, length: 1.5 m ADQ-TB-D25M-HUT 111749 Terminal block for DIN rail mounting with 25-pin D-Sub male connector to Phoenix type clamps ADQ-TB-D78M-HUT 111751 Terminal block for DIN rail mounting with 78-pin D-Sub male connector to Phoenix type clamps Do you need an individual offer? Contact our sales team under: +49 (0)89-894 222 74 or per email: [email protected]. © 2016 by ALLDAQ a division of ALLNET GmbH Computersysteme. Errors and changes reserved. ALLDAQ - a division of ALLNET GmbH Computersysteme Maistrasse 2 - D-82110 Germering, Phone: +49 (0)89 / 894 222 74, Fax: +49 (0)89 / 894 222 33, Email: [email protected] Rev. 1.1 en alldaq.com