Camper Shell Lift Kit

Camper Shell Lift Kit
• Step 1: Create Ceiling Anchor (I used two joists)
Camper Shell Lift Kit
Redirect
Pulley
• Use rope hoist/pulley system
like the one at
http://tinyurl.com/6855uab
(Includes 65 feet of rope)
• Combine with redirect pulley
like the one at
http://tinyurl.com/5rtrluw
• Anchor with cleat like the one
at http://tinyurl.com/6jmyjgo
Anchor
Camper Shell Lift Kit
• Secure to 2x4
with 1 inch
Webbing
• Tie one end &
carabiner/
buckle other
end
• Adjust after 1st
time
Camper Shell Lift Kit
• Pad the ends to protect
the shell
• Use eye bolts w/
washers through ends
• Add 2x4 trim piece on
bottom
• Drill hole in 2x4
where J-clamp goes
Hole
Camper Shell Lift Kit
• Loosen J-clamps
• Slide both 2x4’s between shell and bed rail
• Put screw through shell into 2x4 hole
• Attach webbing over shell (adjust 1st time)
• Back truck into place and secure to hoist
• Lift and tie off to secure anchor point
This can be done by one person 