Black Cat Revolution RVC Ripper Teeth

Black Cat Revolution
RVC Ripper Teeth
www.BlackCatBlades.com [email protected] Toll Free: 1.800.661.6666 Ph: 780.465.6666 Fax: 780.465.9595
Convert to Fully Hammerless Revolution
without changing Ripper Shanks!
• Fits D10 / D11
R Series Rippers
• Hammerless Pin for
Safe & Easy Installation
• Self Cleaning Pin for
Ease of Removal
Short Centerline
Int. Penetration
A
A
Shank Protector
B
C
C
B
Part Number
Description
Weight
A
B
C
Pin
Convertor
RVC500 PTM
RVC550 CLS
RVC550 GS
Intermediate Penetration Tooth
Short Centerline Tooth
Shank Protector
68 lbs
94 lbs
198 lbs
9.27”
11.28”
23.10”
6.99”
7.10”
4.63”
16.75”
18.00”
28.91”
RVC500P
RVC550P
RVC550P
RVC500C
RVC550C
RVC550C
1
Insert Convertor into Shank
265.0715
2
Fit Tooth over Nose & Convertor
3
Insert Helical Pin & Rotate 180 degrees
with Socket Wrench to Engage Lock
TEETH & ADAPTERS - REVOLUTION
Caterpillar® and other identities and/or trademarks referred to in this publication are the registered marks of the entities noted herein. The use of any trademarks of others than Black Cat
Blades Ltd. are solely and exclusively for identification, informational, comparative, and descriptive purposes. Black Cat Blades Ltd. is not affiliated with any owner of such registered marks and
does not make, use, or sell any products manufactured by any such entity identified in this publication.
• Convert J Series to Fully Hammerless
• Hammerless Pin for Safe & Easy
Installation
• Patented Technology
Hammerless Pin & Lock
• Fully hammerless installation & removal for safe and easy use.
• Accept both inch or metric socket, female square drive on opposite end.
• Lock and pin may be used on either side of nose.
• Locks with 180° clockwise turn of pin with socket wrench.
• Pin removal pulls out excess material around the pin head.
RVJ Converter
• Patented RVJ Converter fits into existing J Series retainer opening.
• RVJ teeth slide over Converter & J series adapter.
• Lock is included with Converter, and can be easily replaced.
Caterpillar® and other identities and/or trademarks referred to in this publication are the registered marks of the entities noted herein. The use of any trademarks of others than Black Cat
Blades Ltd. are solely and exclusively for identification, informational, comparative, and descriptive purposes. Black Cat Blades Ltd. is not affiliated with any owner of such registered marks and
does not make, use, or sell any products manufactured by any such entity identified in this publication.