Yard King

Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automo-tive Engineers) code J11940 (Small Engine Power & Torque Rating Procedure),
and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision
2002-5). Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products
on which engines are placed and the variety of environmental issues applicable to operating the
equipment, the gas engine will not develop the rated gross power when used in a given piece of
power equipment (actual “on-site” or net horsepower). This difference is due to a variety of factors
including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel
pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude),
and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton
may substitute an engine of higher rated power for this Series engine.
L’Information de Classement de Pouvoir de Moteur
Le pouvoir brut évaluant pour les modèles de moteur de gaz individuels est conformément étiqueté
à SAE (la Société d’Ingénieurs Automoteurs) le code J11940 (le Petit Pouvoir de Moteur & le
Moment de torsion Evaluant la Procédure), et l’exécution de classement a été obtenue et a été
corrigée conformément à SAE J1995 (la Révision 2002-5). Le véritable pouvoir de moteur brut
sera plus bas et est affecté par, entre autres choses, les conditions d’opération ambiants et le
moteur-à-la variabilité de moteur. Donné les deux le tableau large de produits sur lesquels moteurs
est placé et la variété de problèmes écologiques applicables à l’opération de l’équipement, le
moteur de gaz ne développera pas le pouvoir de grosse évalué quand utilisé dans un morceau
donné d’équipement de pouvoir (la puissance véritable, “sur place” ou nette). Cette différence
est en raison d’une assortiment de facteurs inclut, mais pas limité à, les accessoires (le nettoyeur
d’air, l’échappement, charger, le refroidissement, le carburateur, la pompe de carburant, etc.), les
limitations d’application, les conditions d’opération ambiantes (la température, l’humidité, l’altitude),
et le moteur-à-la variabilité de moteur. En raison des limitations de fabrication et capacité, Briggs &
Stratton peut substituer un moteur de plus haut pouvoir évalué pour ce moteur de Feuilleton.
REPAIR PARTS MANUAL
MODEL NUMBER 961470009
(MFG. ID. NO. 96147000901)
Rotary Lawn Mower
MANUEL DES PIÈCES DE RECHANGE
NO. DE MODÈLE 961470009
(NO. DE MFG. 96147000901)
Tondeuse à Gazon Rotative
412668 Rev. 2 03.16.07 BY
Printed in U.S.A.
TONDEUSE
Ii. GAZON ROTATIVE - NO. DE MODELE
961470009 (NO. DE MFG. 96147000901)
9
co
35
ROTARY LAWN MOWER - - MODEL NUMBER 961470009 (MFG. 10. NUMBER 96147000901)
KEY PART
NO. NO.
403196
w
2
3
4
5
193664X479
405416
194788
132004
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
66426
191574
189713X428
194199X428
188821
751153
51793
405415
750634
850733X004
401815X428
184193
198170
411581
193917X479
193916X479
150078
DESCRIPTION
Handle, Upper
(Includes Foam Grip)
Handle, Lower
Spring, Rear Door, RH
Rope Guide
Nut, Hex, with
Lockwasher Insert 1/4-20
Wire, TIe
Bolt, Handle 5/16-18 x 2-5/8
Knob, Handle
Control Bar
Pin, Handle Adjustment
Nut, Hex
Cotter, Hairpin
Spring, Rear Door, LH
Screw
Bracket, Upstop
Rear Door Assembly
Boll, Rear Door
Plug, Mulcher
Kit, Housing
Handle Bracket Asembly, LH
Handle Bracket Assembly, RH
Screw, Hex Washer Head
KEY PART
NO. NO.
23
24
163183
73800500
25
26
27
28
29
161333
163409
408442
88652
194953
30
31
32
33
34
35
36
37
38
189179
406712
851074
850263
851084
405843
192325
150406
DESCRIPTION
Bolt, Hex Head 5/16-18 x 5/8
NU1, Hex, with
Lockwasher Insert 5/16-18
Baffle, Side
Screw #12 x 5/8
Skirt, Rear
Screw, Hinge 1/4-20 x 1.25
Key Start Switch Assembly
(Includes Key)
Blade Adapter / Pulley
Blade, 21"
Washer
Washer, Lock
Boll, Hex Head
Debris Shield
Bolt
BOil, Engine
Engine, Briggs & Stralton,
Model Number 12Q505
(For engine service
and replacement parts,
call Briggs & Stralton
at 1-800-233-3723)
KEY PART
NO. NO.
39
40
41
42
45
46
47
48
58
59
60
61
62
63
64
65
67
96
410684
407453
404763
54583
183058X428
169699X428
88349
188839X004
182003
186362
182226
163409
408002
189589
190097
186159
180331
197991
404764
193733
193736
412668
DESCRIPTION
Grassbag
Frame, Grassbag
Danger Decal
Screw
Mulcher Door Assembly
Discharge Guard
Nut, Hex
Mounting Bracket,
Debris Shield
Clip, Packaging
Grip, Foam
Spring, Return
Screw, Hi-Lo Thread
Ballery Box
Ballery
Battery Charger
Screw
Key
Clip, Cable
Warning Decal (not shown)
Operator's Manual, English
Operator's Manual, French
Repair Parts Manual,
English/French
NOTE: All component dimensions given In U.S. inches. 1 Inch = 25.4 mm.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.
o
ROTARY LAWN MOWER - - MODEL NUMBER 961470009 (MFG.ID. NUMBER 96147000901)
KEY PART
NO. NO.
DESCRIPTION
1
2
3
4
11
13
14
16
17
18
19
20
22
23
24
25
26
27
28
29
32
33
34
35
36
37
38
Drive Control Assembly (Includes Cable)
Bar, Drive Control
Nut, Hex
Screw
Spring, Return
Gear Case Assembly, Complete
Pulley, Drive
Rod, Connecting
Spring, Extension
Spring, Selector
Knob, Selector Spring
E-Ring 7/8
Bearing, Ball
Retainer, Drive Assembly
Screw, Tapping, Hex Head 1/4-20 x .75
Cover Drive
Screw, Threaded, Rolled #10-25 x .50
Washer, Shim (as required)
E-Ring 7/16
Cover, Dust, Wheel
Wheel 9 x 2
Nut, Flangelock 3/8-16
Washer
Shaft Assembly, Rear
Shaft Assembly, Front
Retainer, Front Shaft
Screw #12 x 5/8
404846
194185X428
191730
199687
406558
404839
193443
407147
404942
193663X004
189808X428
12000022
404838
161118X004
57808
408001 X428
750634
52160
12000058
189403
405744X427
409148
851226
403102X004
407175X004
161463
163409
KEY PART
NO. NO.
DESCRIPTION
39
40
41
44
45
47
49
50
60
61
62
63
64
65
66
67
68
69
70
71
72
73
75
76
77
78
79
Bolt, Shoulder, Semi-Glmlett Point
Wheel 8x2
Pinion
V-Belt
Pawl
Washer
Screw, Hi-Lo Thread
Belt Keeper
Case, Lower
Case, Upper
Shaft, Output, Long
Seal, Output Shaft
Bushing
Washer
Seal, Worm Shaft
Bearing, Ball
Gear, 28 Teeth
Fixed Dog Clutch, LH
Pin, Output Shaft
Movable Dog Clutch, LH
Shaft, Output, Short
Screw, Case
Pin, Worm Shaft
Fixed Dog Clutch, RH
Movable Dog Clutch, RH
Spring, Leaf
Shaft, Worm
407059
193909X427
404835
406580
404845
67725
163409
404832X004
412747
412736
412757
183508
183511
183509
183514
183506
412742
412739
412741
412740
412756
183513
412746
412744
412743
410731
412737
NOTE: All component dimensions given in U.S. inches. 1 inch; 25.4 mm.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.