KW Catalogue 2015-2016

Transcription

CATALOGUE
SAFETY
WELDING & CUTTING
2015 - 2016
Delivery within 24 hours from stock!
(The Netherlands)
Katje Welding bv, De Steven 4, NL-9206 AX Drachten, PO Box 5, NL-9200 AA Drachten,
tel. +31-512-532829, fax +31-512-532897, e-mail: [email protected], website: www.katjewelding.nl
General Terms and Conditions
Art.1 APPLICATION
1.
2.
Unless expressly agreed in writing, hereafter referred to as the "Seller", and a third party, hereafter referred to as the "Buyer", the stipulations contained in these
general conditions apply to all quotations and offers made by the seller, the acceptation of these by the buyer as well as any agreement for sale, purchase or the
supply of services concluded as a consequence hereof. By entering into an agreement with the seller, the buyer declares his awareness and acceptance of these
general conditions, including eventual changes therein. Other (general) conditions of sale or purchase are expressly declared to be non-applicable to such
agreements.
The nullity or void ability at law of one or more stipulations in these general conditions leaves the applicability of the other stipulations unimpeded.
Art.2 OFFER
1.
Every quotation or offer made by the seller is without engagement, except when explicitly mentioned different in writing.
Art.3 AGREEMENT
1.
2.
The seller is only legally bound once the agreement has been confirmed by him in writing.
The agreement is concluded on the day on which the seller sends his written confirmation to the buyer or has dispatched the goods/merchandise.
Art.4 INTELLECTUAL PROPERTIES
1.
2.
Sketches, models etc. contained therein, as well as those in respect of the products supplied by the seller, are reserved to the seller. Should any action on the
part of the buyer be required for these rights to be established, the buyer commits himself unconditionally to render his assistance.
All above mentioned items remain the property of the seller, even if a charge has been made for them, and may not, wholly or partially, be copied, reproduced,
supplied or lent to third parties by the buyer, without the seller's written consent.
The items mentioned in the previous paragraph must be returned by the buyer to the seller immediately upon the latter's request.
Art.5 PRICE
1.
2.
3.
4.
Unless otherwise agreed, and except in the case of quotations for ex-factory supply, the prices quotated by the seller include the cost of packaging, transport and
delivery to the place indicated by the buyer within Holland for shipment with a net invoice value of € 450,00 (exclusive of VAT). For shipment with a net invoice value
less than € 450,00 (exclusive of VAT) the transport costs will be charged to buyer.
Prices always exclude value added tax.
If, within three months of the conclusion of the agreement, but before the date of delivery, the seller alters the agreed price as a consequence of changes in one or
more of the factors determining such price, whatever these may be, the buyer is authorized to cancel the agreement. If, after these three months have passed, but
before the date of delivery, changes take place in the factors determining price, whatever these may be, the seller has the right to alter the agreed prices. Factors
determining price will include, in all cases: raw material prices, component prices, wage and transport costs, foreign currency rates, import duties and taxes or other
levies. The applicability of the provisions contained in Article 7A paragraph 1643 of the New Civil Code is expressly excluded.
The seller may impose a surcharge for supplies with an invoice value of less than € 227,00 (exclusive of VAT), even if the delivery is combined with that or other
items.
Art.6 PAYMENT
1.
2.
3.
4.
5.
6.
Payment will be deemed to have been made when the amount in question has been fully received by the seller. The buyer is obliged to fulfil his obligation to pay
within 10 days of the invoice date, in which case a possible credit surcharge, shown separately on the invoice, may be deducted. The buyer is not authorized to
make any deductions from the price shown on the invoice to cover any counter-claim made by him on the seller.
Amounts which have not been settled within 10 days of the date of invoice will be subject to interest at the official interest rate (for commercial debts), from the date
due until the date of full settlement has been received. This will be calculated per calendar month, or part thereof, for the amount outstanding, including interest due
on this. Charging these expenses does not abrogate the obligation of immediate payment.
If the buyer neither settles his account on time, nor conforms to a subsequent notification of default within 10 days, the seller is authorized to regard the agreement
as void, without recourse to legal action. In this case, the buyer is responsible for damage suffered by the seller, including, inter alia, loss of profit, transport costs
and legal charges incurred as a result of the default. Furthermore, once the buyer has been declared to be in default, the seller is entitled to charge interest on the
amount outstanding at a rate of one percent above the current official rate for the first calendar month or part thereof, at three percent above this rate for the second
month and at five percent above the official rate for the third and subsequent months.
Should the seller take legal (or extra-judicial) action against the buyer, in the case of the latter's default, the cost of this is payable by the buyer. The (extra-) judicial
damages payable will, in any case, amount to 15 percent of the principal, including VAT, with a minimum of € 113,00.
The seller is entitled to charge the buyer for the cost of storing goods ready for delivery if the latter does not take delivery on time, for whatever reason.
Every payment of outstanding invoices will be taken as payment towards the oldest outstanding account.
Art.7 TESTING
1.
The seller will, before despatch, if agreed in writing, inspect and test the goods to be supplied. The buyer has the right to attend the tests and will be advised by the
seller, in good time, that the goods are ready for testing. The seller will supply the buyer, at the latter's request, with a certified copy of the inspection and test
reports. If the buyer wishes, and has indicated this to the seller in good time, these inspections and tests may be carried out by an independent research institution
designated by the buyer and at the buyer's expense.
Art.8 SUPPLY
1.
2.
3.
Unless otherwise agreed in writing, the time of delivery will be regarded as a prudent estimate. If delivery in a definite period of time has been agreed, this
commences on the date upon which the seller confirms the agreement in writing, having received all information necessary for the performance of the agreement.
Delivery will be regarded as having been completed at the moment that the goods, or the most important part of them, have been delivered for testing to the buyer's
factory site or to another location, if this is expressly determined in the agreement.
The fact that delivery is not made on time, for whatever reason, does not entitle the buyer to damages, suspension or annulment of the agreement, or to nonperformance of any obligation on his part arising out of this or any other agreement made with the seller.
Art.9 TRANSFER OF TITLE AND LIABILITY
1.
2.
Except as provided in paragraph 2 of this article, the title to and liability for the goods will be transferred to the buyer on delivery, as described in article 8.
As long as the buyer has not either paid the full purchase price, including possible attendant expenses, for this or previous supplies, or given guarantees for such
payment, the title to the goods remains with the seller. In this case, ownership of the goods is transferred to the buyer once he has met all his obligations to the
seller.
Katje Welding bv
page 1
2015-2016
General Terms and Conditions
Art.10 NON-PERFORMANCE DUE TO FORCE MAJEURE
1.
2.
3.
4.
The time of delivery, as indicated in article 8, will be extended by the period during which the seller is prevented from carrying out his obligations by force majeure.
Force majeure, as far as the seller is concerned, applies when, after an agreement has been concluded, the seller is prevented from carrying out his obligations
under this agreement by, inter alia: war, danger of war, civil war, commotion, molestation, fire, water damage, flooding, lock-outs, import and export restrictions,
government measures, faulty machinery or disruption of energy supplies, etc. In all cases this applies both in respect to the seller's own company as to third parties
from whom the seller needs to obtain raw materials or other supplies and also during storage and transport, whether under the seller's own management or not, and
further under all other circumstances which occur outside the scope of the seller's blame or liability.
If delivery or the execution of work is delayed for more than two months due to force majeure, the buyer and seller are both entitled to regard the agreement as
concluded, with neither party being liable to damages from the other.
If force majeure occurs when the agreement has been partially carried out, the buyer is, if the outstanding supplies are delayed by two months or more by force
majeure, entitled to keep the goods already supplied and to pay only the amount due for these. Furthermore, the buyer is entitled to regard the agreement
concerning the goods already delivered as void, in which case he is obliged to return these goods already supplied cannot be properly used by them as a result of
the remaining goods not being delivered.
Art.11 DISSOLUTION
1.
2.
The buyer is in default at law if he is declared bankrupt or has been given a moratorium on payments, or if he has applied for these, or if he decides on, or actually
carries out (partial) closing down or liquidation of his business, or if a substantial part of his capital is attached as a consequence of a claim on him.
In such cases the seller is entitled, without there being a requirement for a summons or declaration of default being issued or court action being taken, to:
- entirely or partially suspend the performance or fulfilment of one or more of his obligations arising out of the agreement(s) concluded with the buyer; and/or
- to demand immediate payment from the buyer; and/or
- to request payment in cash; and/or
- to terminate the agreement(s) made with the buyer immediately, entirely or partially.
The stipulations in article 11, paragraph 1 do not curtail the rights of the seller to complete compensation for damage, interest and expenses.
Art.12 GUARANTEE
1.
2.
3.
4.
The seller guarantees the soundness of the goods which are to be supplied as according to the agreement, and that these goods comply in all respects with all
appropriate requirements set out in applicable laws and/or other governmental regulations which are in force at the time the agreement was concluded.
The stipulations in paragraph 1 also apply to welding filler materials supplied by the seller, in which case the material supplied is also guaranteed, on delivery, to
comply with the seller's specifications, taking into account the tolerances prevailing for such materials in the branch.
The guarantee mentioned in paragraph 1 does not apply to advice furnished by the seller concerning welding and cutting, the choice and use of welding filler
materials and the use of machines and accessories.
The advice mentioned in paragraph 3 only indicates the possibilities available to the buyer or user. The practical application of information contained in such
recommendations is entirely for the account and risk of the buyer or user.
Art.13 LIABILITY
1.
2.
3.
4.
5.
The seller renders himself liable to the buyer solely for deficiencies in the goods supplied which manifest themselves within the guarantee period cited in the
agreement, unless the damage is the result of the fact that the goods were used in disregard of the instructions supplied with them, or if other mistakes were made
during use.
The seller's liability is restricted to the value of the faulty article supplied or to replacement of that article or part thereof.
The buyer will safeguard the seller against third party liability of any kind, for damage occurring which has not been caused by an action on the part of the seller.
Without prejudice to the stipulations of article 12, the seller cannot be accused of negligence in the case of previously supplied welding filler materials if welding
technology of knowledge of the use of raw materials changes.
In accordance with the stipulations of article 12 paragraph 4, the seller is never liable for indirect or direct damage arising from his recommendations in any manner
whatsoever, whether or not such advice was given against payment.
Art.14 APPLICABLE LAW
1.
Offers, quotations and agreements to which these general conditions apply are subject to the Law of the Netherlands.
Art.15 DISPUTES
1.
2.
3.
All disputes arising out of this agreement or from subsequent agreements affecting it, will be, with the exclusion of the usual power of the judiciary, settled by
arbitration according to the regulations of the Netherlands Arbitration Institute.
A dispute will be held to exist if this has been notified in writing by one party to the other.
This arbitration clause does not exclude the entitlement of the parties to apply for a summary hearing at the Civil Court in urgent cases, and for them to engage in
preventative legal action and to take the steps necessary for this to be effective.
Katje Welding bv
page 2
2015-2016
Index
Pagee
Regulators Unicontrol..........................................................................................................................................................................................6
- Gassavers Pluscontrol, balloon regulators, regulators Jetcontrol 600, regulators Unicontrol 500 (300 bar)
Regulators HiQ® .................................................................................................................................................................................................10
Regulators medical ............................................................................................................................................................................................11
Regulators manifolds .........................................................................................................................................................................................12
Many-Flow manifolds .........................................................................................................................................................................................13
- High pressure hoses, cylinder connections, wallbrackets
Regulators CATWELD Dincontrol .....................................................................................................................................................................15
- Pressure gauges
Regulators CATWELD Standard........................................................................................................................................................................17
Regulators CATWELD .......................................................................................................................................................................................18
Cylinder coupling adapters, gaskets.................................................................................................................................................................19
Welding system The Little Torch .......................................................................................................................................................................21
- Spare parts
Soldering and brazing torch HBL ......................................................................................................................................................................23
Welding and cutting system AGA X-11 Original ...............................................................................................................................................24
Welding and cutting system LX-14....................................................................................................................................................................25
Welding and cutting system AGA X-21 Original ...............................................................................................................................................26
Cutting torch AGA X-511 Diamond....................................................................................................................................................................28
Cutting torch CATWELD X-31 ............................................................................................................................................................................29
Cutting nozzles (injector) ...................................................................................................................................................................................31
Cutting nozzles (nozzle mix) ..............................................................................................................................................................................33
High Speed cutting nozzles (nozzle mix) .........................................................................................................................................................36
Welding hoses and accessories........................................................................................................................................................................38
Quick-action couplings ......................................................................................................................................................................................40
Hose connections and fittings...........................................................................................................................................................................41
OM STOP anti leakage device ...........................................................................................................................................................................45
- Hose reels
Propane equipment air aspiration .....................................................................................................................................................................46
- Proparange, regulators, Classic, Lomat Piëzo
Propane equipment accessories .......................................................................................................................................................................48
- Refillable gascylinders, hose failure valves, Lomax
Gas welding accessories ...................................................................................................................................................................................49
- Goggles, spark lighters, cylinder keys, nozzle cleaners, flashback arrestors
Gas welding wire ................................................................................................................................................................................................51
Brazing and soldering alloys .............................................................................................................................................................................52
Stay Brite ............................................................................................................................................................................................................53
Soft soldering alloys ..........................................................................................................................................................................................54
Fluxes..................................................................................................................................................................................................................55
TIG welding wire ................................................................................................................................................................................................56
-TIG pen
Gas welding applications...................................................................................................................................................................................57
- Thermic lances, flame cleaning attachments, heating attachments, powder cutting equipment
Cylinder trolleys .................................................................................................................................................................................................58
Machine cutting torches ....................................................................................................................................................................................59
- Pressure control gauges
Katje Welding bv
page 3
2015-2016
Index
Pagee
Safety ..................................................................................................................................................................................................................60
Heat protection fabrics.......................................................................................................................................................................................61
- Heat protection clothing, high temperature gloves, flame protection mats
Tempilstik temperature indicator ......................................................................................................................................................................65
TIG-electrodes CATWELD..................................................................................................................................................................................66
Non destructive material testing .......................................................................................................................................................................67
Accessories electrical ........................................................................................................................................................................................68
- Earth clamps, electrode holders, wire brushes, chipping hammers, hand (test) flowmeters, auto darkening welding helmets
Electrode ovens..................................................................................................................................................................................................70
CO2 applications.................................................................................................................................................................................................72
- Hand Air, CO2 gasheaters, Fryson
Gasmixers and gasblenders ..............................................................................................................................................................................73
SNOWPACK dry ice pellet maker ......................................................................................................................................................................75
JETFREEZER pipe freezing equipment.............................................................................................................................................................76
Tools for piping ..................................................................................................................................................................................................77
Purge gas systems .............................................................................................................................................................................................79
Technical data and conversion tables ..............................................................................................................................................................82
Katje Welding bv
page 4
2015-2016
Katje Welding bv
page 5
2015-2016
Regulators Unicontrol
Description
Unicontrol regulators are a completely new regulator range.
The Unicontrol series consists of regulators designed for the
most common industrial gases.
The design is simple, safe and wear resistant. The operation
of the regulators is first-rate and they provide highly efficient
and precise regulation of gas supplies. Unicontrol regulators
are made to satisfy national standards in most countries as
regards inlet and outlet fittings, pressure rating, pressure
gauges as well as safety requirements. The design is compact
and rugged yet the flow capacity is sufficient for the majority of
gas processes in the cutting and welding field. All variants in
the range are of the same basic design.
The major components are common throughout
the range thus limiting the number of spares and
accessories that need to be held for repair and in
service use. All regulators are subject to individual
tests before leaving the factory.
The horizontal position of the pressure relief valve
prevents water from penetrating the regulator.
The service life of the regulator will increase
significantly.
Flow diagrams
Acetylene
Oxygen
The capacity graphs show the outlet pressure as a function of the flow rate at different pressures (P1).
Katje Welding bv
page 6
2015-2016
Unicontrol 500, 2 pressure gauges, EN 2503. Max primary pressure 200 bar
Art.no.
Gas
A044700
A044701
A044702
A044703
A044704
A044705
A044710
A044711
A044712
A044713
A044720
A044725
A044730
A044740
A044742
A044743
A044750
A044751
A044752
Acetylene NL
Acetylene PP AGA
Acetylene NO
Methane
Acetylene 5/8” BSP
Acetylene FR
Oxygen NL
Oxygen GE
Oxygen NO
Oxygen FR
Carbon Dioxide
Carbon Dioxide
Formeer (backinggas)
Argon-Helium-Nitrogen
Nitrogen Airco 1 fixed 10 bar
Nitrogen Airco 2 fixed 10 bar
Air
Air fixed 8 bar
CO/N2 calibration gases
Nominal
working
pressure
bar
0- 1.5
0- 1.5
0- 1.5
0-10.0
0- 1.5
0- 1.5
0-10.0
0-10.0
0-10.0
0-10.0
0-10.0
0-10.0
0-10.0
0-10.0
0-10.0
0-10.0
Primary
pressure
gauge
scale bar
0- 40
0- 40
0- 40
0-315
0- 40
0- 40
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
Secondary
pressure
gauge
scale bar
0- 2.5
0- 2.5
0- 2.5
0-16.0
0- 2.5
0- 2.5
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
Side entry according
NEN 3268
Connection yoke
W 28.806 x 1/14”
G 3/4”
W 21.8 x 1/14”
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
G 3/4”
W 21.8 x 1/14”
W 21.8 x 1/14”
W 21.8 x 1/14”
W 21.8 x 1/14”
W 24.32 x 1/14”
W 24.32 x 1/14”
W 24.32 x 1/14”
W 28.806 x 1/14”
W 28.806 x 1/14”
W 1” (25.4 x 1/8”)
RU 6
RH
LU 1
LI 2
LI 2
RI 2
LH
LH
LH
RH
RU 1
RH
RU 1
RU 1
LU 1
RU 3
RU 3
RU 3
RU 6
RU 6
LU 4
RH
RH
LH
RH
RH
RH
RH
RH
LH
Unlike common regulators, Unicontrol regulators incorporate a fully encapsulated valve for consistent flow characteristics, longer life and
improved performance. A sinter filter within the encapsulated valve prevents particles from entering the seat.
Unicontrol 500 Oxygen
Unicontrol 300, 2 gauges (l/min), EN 2503. Max primary pressure 200 bar
The regulator has a content pressure gauge and a flow pressure gauge showing the gas flow in litres per minute, as well as single wheel
adjustment of the gas flow. Unicontrol 300 is intended for MIG/MAG welding processes.
Art.no.
Gas
A044765
A044766
A044767
A044768
Carbon Dioxide
Argon/mixtures
Mison
Nominal
flow
gauge
l/min
0-35 l/min
0-35 l/min
0-35 l/min
0-35 l/min
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
0-315
Secondary
flow
gauge
scale l/min
0-45 l/min
0-45 l/min
0-45 l/min
0-45 l/min
NEN 3268
W 21.8 x 1/14”
W 21.8 x 1/14”
W 24.32 x 1/14”
W 1” (25.4 x 1/8”)
RU 1
LU 1
RU 3
RU 4
RH
LH
RH
RH
Unicontrol 300 Argon/CO2
Katje Welding bv
page 7
2015-2016
Unicontrol 100, 1 pressure gauge and 1 flowmeter, EN 2503. Max primary pressure 200 bar
The regulator is especially available for TIG welding processes. It is pre-set at a working pressure of 4.5 bar to produce an accurate flow
setting. The regulator has a content pressure gauge and a flowmeter with a ball floating device showing the flow in l/min against a graduated
scale. The scale's graduation is adapted for Argon. The flow is read off at the upper edge of the ball floating device.
Art.no.
Gas
A044780
A044782
A044784
A044785
A044786
A044788
A044797
A044790
A044792
A044794
A044796
Carbon Dioxide
Carbon Dioxide/gassaver
Hydrogen
Argon/mixtures
Mison
Helium
Air
Calibration gas/flowmeter
Calibration gas
Calibration gas/gassaver
Preset
working
pressure
bar
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
<3
<1
< 0.3
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
Max
capacity
flowmeter
l/min
2-30 l/min
2-30 l/min
2-30 l/min
2-30 l/min
2-30 l/min
2-30 l/min
2-30 l/min
2-30 l/min
2-30 l/min
2-30 l/min
NEN 3268
W 21.8 x 1/14”
W 21.8 x 1/14”
W 21.8 x 1/14”
W 21.8 x 1/14”
W 24.32 x 1/14”
W 1” (25.4 x 1/8”)
W 24.32 x 1/14”
W 28.806 x 1/14”
W 1” (25.4 x 1/8”)
W 1” (25.4 x 1/8”)
W 1” (25.4 x 1/8”)
RU 1
RU 1
LU 1
LU 1
RU 3
RU 4
RU 3
RU 6
LU 4
LU 4
LU 4
RH
RH
LH
LH
RH
RH
RH
RH
LH
LH
LH
Unicontrol 100 Argon/CO2
Unicontrol 500, 1 pressure gauge, EN 2503
Whether you need to heat, power or grill, propane cylinders and tanks are used daily across the globe. The required cylinder regulators
are used strictly for outdoor appliances and function to regulate pressure between the bottle and the hose.
Art.no.
Gas
A044759
A044760
Propane (BENEGAS)
Propane (SHELL), Mapp, Apachi
Secondary
pressure
gauge
scale bar
0-6.0
0-6.0
NEN 3268
POL
W 21.8 x 1/14”
LU 1
LH
Unicontrol 500 Propane
Katje Welding bv
page 8
2015-2016
Jetcontrol 600, 2 pressure gauges, EN 2503. Max primary pressure 200 bar
Jetcontrol 600 regulators are single stage, two gauge regulators of simple and compact design giving long and trouble free service.
Jetcontrol 600 regulators are extensively used in oil refineries, chemical research laboratories and any area requiring safety and reliability in the
control of high pressure gases up to a maximum of 200 bar outlet pressure. Diaphragms are manufactured from stainless steel and the inlet is
fitted with an efficient metal filter ensuring long service life.
Art.no.
Gas
A261350#
A261352#
A261353#
Hydrogen
Air
Nominal
working
pressure
bar
0-200.0
0-200.0
0-200.0
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
Secondary
pressure
gauge
scale bar
0-315.0
0-315.0
0-315.0
NEN 3268
W 24.32 x 1/14”
W 21.8 x 1/14”
W 28.806 x 1/14”
RU 3
LU 1
RU 6
RH
LH
RH
Jetcontrol 600 Nitrogen
Unicontrol 500, 2 pressure gauges, EN 2503. Max primary pressure 300 bar
Art.no.
Gas
A044810
A044815
A044811
A044816
Oxygen
Oxygen
Nominal
working
pressure
bar
0-12.0
0-12.0
0-12.0
0-12.0
Primary
pressure
gauge
scale bar
0-450
0-450
0-450
0-450
Secondary
pressure
gauge
scale bar
0-16.0
0-16.0
0-16.0
0-16.0
Side entry
according NEN 3268
according NEVOC 5145
NEVOC
NEVOC
G 5/8” (22.9 x 1/14”)
W 24.32 x 1/14”
RI 2
RU 3
RH
RH
Unicontrol 300 bar
Pluscontrol 101
Pluscontrol 101 is a gassaver for the reduction of the initial gas surge when welding with shielding gas. At the welding start a solenoid valve is
opened to let the shielding gas flow from the cylinder via the regulator or outlet through the shielding gas hose to the welding unit and on the
welding torch and the weld. The volume of the hose between the regulator and the solenoid valve of the welding unit determines the size of the
gas surge; the longer the hose the bigger the surge. Pluscontrol 101 will keep the gas surge at a minimum and save gas. Furthermore the device
is adjustable for a certain gas surge or maximum flow and fits all kinds of shielding gas regulators and outlets.
Art.no.
Description
A042801 Gassaver PC 101
A042803 Gassaver PC 101 - flow gauge
A291967# Balloon regulator flexible
Katje Welding bv
Connection
Inlet
G 3/8”
G 3/8”
page 9
Connection
thread Outlet
female G 3/8”
female G 3/8”
thread
male
male
2015-2016
Regulators HiQ®
Prices available upon request
R 200/1 single stage regulator, 2 pressure gauges, EN 2503. Max primary pressure 200 bar
HiQ® single stage regulators, especially suitable for specialty gases where the demands on purity, thightness and safety are high.
HiQ® is designed to achieve a unique performance in combining outstanding safety, tightness, pressure stability, flow rate span and ergonomics.
A line of compact single stage regulators and two-stage regulators is available.
R 200/1 is a high pressure regulator capable of dealing with high flows. Material chromium plated (RB) brass or stainless steel (RS), suitable
for corrosive or non-corrosive gases.
Art.no.
Description
A420411##
A420413##
A420415##
A420417##
A420419##
A420421##
A420423##
A420425##
RB 200/1/6
RS 200/1/6
RB 200/1/14
RS 200/1/14
RB 200/1/50
RS 200/1/50
RB 200/1/200
RS 200/1/200
Nominal
working
pressure
bar
0- 6.0
0- 6.0
0- 14.0
0- 14.0
0- 50.0
0- 50.0
0-200.0
0-200.0
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
0-315
0-315
0-315
0-315
0-315
Secondary
pressure
gauge
scale bar
-1.0- 10.0
-1.0- 10.0
0 - 25.0
0 - 25.0
0 - 80.0
0 - 80.0
0 -315.0
0 -315.0
NEN 3268
On request
On request
On request
On request
On request
On request
On request
On request
R200/2 two-stage regulator, 2 pressure gauges, EN 2503. Max primary pressure 200 bar
R 200/2 is a high pressure, two-stage regulator for specialty gases, with one-stage preset and the other adjustable, to obtain a very constant
pressure. Material chromium plated (RB) brass or stainless steel (RS), suitable for corrosive or non-corrosive gases.
Art.no.
Description
A420431##
A420433##
A420435##
A420437##
A420439##
A420441##
RB 200/2/3
RS 200/2/3
RB 200/2/6
RS 200/2/6
RB 200/2/10.5
RS 200/2/10.5
Nominal
working
pressure
bar
0- 3.0
0- 3.0
0- 6.0
0- 6.0
0-10.5
0-10.5
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
0-315
0-315
0-315
Secondary
pressure
gauge
scale bar
-1.0- 5.0
-1.0- 5.0
-1.0-10.0
-1.0-10.0
-1.0-18.0
-1.0-18.0
NEN 3268
On request
On request
On request
On request
On request
On request
Rear entry G 3/8” female and side entry G 1/4” female. Outlet connection G 1/4” female.
Optional HiQ® components on request, for instance:
Points of use wall design and bench design
Gas panels
High pressure valves.
When ordering always state the type of gas and the outlet connection.
Katje Welding bv
page 10
2015-2016
Regulators medical
The demands made on regulators in the medical field are extremely high. Components must be capable of dealing with high and low pressures,
large and small flows. Medired and Mediline have been developed to match tomorrow’s fast increasing demands.
Mediline (medicinal oxygen) single stage regulator, 1 pressure gauge, CE marked. Max primary pressure 200 bar
Art.no.
Gas
A150001#
A150005#
A150015#
Oxygen
Oxygen
Oxygen
Nominal
flow l/min
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
0-0.05-0.1-0.2-0.3-0.4-0.5-0.6-0.7-1.0
0-0.5-0.75-1.0-1.5-2.0-2.5-3.0-4.0-5.0
0-1.0-2.0-3.0-4.0-5.0-6.0-9.0-12.0-15.0
NEN 3268
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
RI 2
RI 2
RI 2
RH
RH
RH
Handwheel
Handwheel
Handwheel
Medired (medicinal oxygen) single stage regulator, 2 gauges (l/min), CE marked. Max primary pressure 200 bar
Art.no.
Gas
Nominal
flow gauge
l/min
A150120#
A150119#
A150121#
A150122#
Oxygen
Oxygen
Oxygen
Oxygen
0.2- 1.0
0.5- 2.0
1.0- 6.0
4.0-15.0
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
0-315
NEN 3268
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
RI 2
RI 2
RI 2
RI 2
RH
RH
RH
RH
Handwheel
Handwheel
Handwheel
Handwheel
Medired “click” (medicinal oxygen) two-stage regulator, 1 pressure gauge, CE marked. Max primary pressure 200 bar
Art.no.
Gas
A150161#
A150162#
Oxygen
Oxygen
Nominal
flow l/min
Primary
pressure
gauge
scale bar
0-315
0-315
0-0.5-0.75-1.0-1.5-2.0-2.5-3.0-4.0-5.0
0-1.0-2.0-3.0-4.0-5.0-6.0-7.0-12.0-15.0
NEN 3268
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
RI 2
RI 2
RH
RH
Handwheel
Handwheel
Medired (medicinal oxygen) single stage medium pressure regulator
Art.no.
Gas
Nominal
flow l/min
A150150#
A150151#
A150152#
Oxygen
Oxygen
Oxygen
0.2- 1.0
1.0- 6.0
4.0-15.0
A150060#
A150061#
A150062#
A150065#
A150066#
A150067#
Secondary
flow
gauge
scale l/min
0- 1 l/min
0- 6 l/min
0-15 l/min
Connection
DIN
DIN
DIN
Therapy accessories
Medidave regulator, 0-10 bar, handwheel RI-2, rear entry
Varimed regulator, 0-10 bar, handwheel RI-2, side entry
Y-piece, entry DIN, outlets DIN
Medicinal medium pressure regulator 0 - 1 l/min
Medicinal medium pressure regulator 0 - 5 l/min
Medicinal medium pressure regulator 0 -15 l/min
Optional Pin Index type fittings available upon request.
Katje Welding bv
page 11
2015-2016
Regulators manifolds (low pressure)
A central gas distribution system reduces the risk of accidents as there is no need to handle gas cylinders inside the work place. Gas cylinders
are collected under one roof which facilitates removal. Jetset and Unicontrol medium pressure regulators for safe and reliable gas distribution
make gases available when and where they are needed. Optional features supervises the gas supply and avoids gas flow interruption by
channel specific optical and acoustic alarm monitoring.
Jetset/Unicontrol medium pressure regulator, EN 2503
Art.no.
Description
B263001
B263002
B263003
B263009
B263012
B263060
B263062
B263063
Jetset Acetylene complete
Jetset Oxygen complete
Jetset Acetylene/Oxygen complete
Jetex R-13 Oxygen (>100 nm 3 )
Jetset Propane/Tetrene complete
Unicontrol 700 Acetylene
Unicontrol 700 Propane/Tetrene
Nominal
working
pressure
gauge bar
0- 1.5
0-10.0
0-1.5/10.0
0-16.0
0- 6.0
0- 1.5
0-10.0
0- 6.0
Secondary
pressure
gauge
scale bar
0- 2.5
0-16.0
0-2.5/16.0
0-25.0
0- 6.0
0- 2.5
0-16.0
0- 6.0
Connection
G1/2” LH
G1/2” RH
G1/2” LH - G1/2” RH
G3/4” RH
G1/2” LH
G3/8” LH
G3/8” RH
G3/8” LH
Jetset/Unicontrol medium pressure regulator (l/min), EN 2503
Art.no.
Description
B263005
B263006
B263011
B263064
B263065
Jetset PC-10 incl. gassaver Argon
Jetset flowmeter Argon
Jetset flowmeter Formeer (backinggas)
Unicontrol 700 Argon/mixtures
Unicontrol 700 Argon/mixtures
Preset
working
pressure
bar
4.0
2.5
4.5
2.5
2.5
Max
capacity
flowmeter
l/min
2-30 l/min
2-30 l/min
2-30 l/min
2-30 l/min
Connection
G1/2” RH
G1/2” RH
G1/2” LH
G3/8” RH
G3/8” RH
Jetset PC-10 incl. gassaver Argon
Jetset includes a medium pressure regulator, ball valve with filter and wall brackets.
Katje Welding bv
page 12
2015-2016
Regulators manifolds (high pressure)
Regulator high capacity, 2 pressure gauges, EN 2503. Max primary pressure 200 bar
Art.no.
Description
B260104
B260204
B260206
B260110
B260112
B260210
B260212
B260214
B260216
Unicontrol 501 Acetylene
Unicontrol 500 Nitrogen
MR-60 Acetylene
MR-60 Acetylene
MR-60 Oxygen
MR-60 Oxygen
MR-60 Mison
MR-60 Nitrogen
Nominal
working
pressure
gauge bar
0- 1.5
0-10.0
0-18.0
0- 1.5
0- 1.5
0-12.0
0-12.0
0-12.0
0-50.0
Primary
pressure
gauge
scale bar
0- 40
0-315
0-450
0- 40
0- 40
0-315
0-315
0-315
0-450
Secondary
pressure
gauge
scale bar
0- 2.5
0-16.0
0-25.0
0- 2.5
0- 2.5
0-25.0
0-25.0
0-25.0
0-80.0
Connection
3/4”
W 21.8 x 1/14”
W 21.8 x 1/14”
3/4”
3/4”
W 21.8 x 1/14”
W 21.8 x 1/14”
W 21.8 x 1/14”
W 21.8 x 1/14”
Unicontrol 501
RU 1
RU 1
RU 1
RU 1
RU 1
RU 1
RH
RH
RH
RH
RH
RH
RH
RH
RH
Rear entry
Rear entry
MR-60
Many-Flow gas supply systems
The compact Many-Flow gas supply sytems with its modular design establishes a complete range of gas control units either for cylinders or for
bundle gas supply with Acetylene or high pressure gases up to 300 bars. This pressure control device is delivered as a basic unit together with
high pressure hoses, related to the gas type. Once chosen this kind of modular concept you are always provided with the opportunity to extend
your gas supply to your particular operating conditions.
Art.no.
Description
B231512
B231513
B231522
B231523
B231533
B231542
B231812
B231813
B231822
B231823
B231833
B231842
B232012
B232013
B232022
B232023
B232033
B232042
Many-Flow gas supply system 1 x 2 cylinders Acetylene
Many-Flow gas supply system 1 x 2 bundles Acetylene
Many-Flow gas supply system 1 x 2 cylinders Oxygen
Many-Flow gas supply system 1 x 2 bundles Oxygen
Many-Flow gas supply system 1 x 2 cylinders Argon
Many-Flow gas supply system 1 x 2 bundles Argon
Regulator
HP
hoses
Unicontrol 501
Unicontrol 501
Unicontrol 501
Unicontrol 501
MR-60
MR-60
Unicontrol 501
Unicontrol 501
Unicontrol 501
Unicontrol 501
MR-60
MR-60
Unicontrol 501
Unicontrol 501
Unicontrol 501
Unicontrol 501
MR-60
MR-60
2
3
4
6
6
2
2
3
4
6
6
2
2
3
4
6
6
2
Side entry acoording
NEN 3268
Connection yoke
Connection yoke
Connection yoke
Connection yoke
W 28.806 x 1/14”
W 28.806 x 1/14”
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
W 24.32 x 1/14”
W 24.32 x 1/14”
W 24.32 x 1/14”
W 24.32 x 1/14”
W 24.32 x 1/14”
W 24.32 x 1/14”
RU 6
RU 6
RI 2
RI 2
RI 2
RI 2
RI 2
RI 2
RU 3
RU 3
RU 3
RU 3
RU 3
RU 3
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
RH
Many-Flow gas supply system
Katje Welding bv
page 13
2015-2016
Many-Flow gas supply systems
Many-Flow valve block up to 300 bar inlet pressure
Art.no.
Description
NEN 3268
B260020
B260021
Many-Flow valve block Acetylene
Many-Flow valve block compressed gases
G 3/4”
W 21.8 x 1/14”
RU 1
RH
RH
High pressure flexible hoses + cylinder connections
Art.no.
Description
Thread connection
B264322#
B264323#
B264332#
B264333#
B264302#
B264304#
B264306
B264308
B264309
B264311
High pressure flexible hose Acetylene L= 1000 mm
High pressure flexible hose Acetylene L= 2000 mm
High pressure flexible hose Solef up to 200 bar L= 800 mm
High pressure flexible hose Solef up to 200 bar L= 2000 mm
High pressure flexible hose Teflon up to 200 bar L= 800 mm
High pressure flexible hose Teflon up to 200 bar L= 2000 mm
Cylinder connection Acetylene
Cilinderaansluiting Argon
Cilinderaansluiting Air
Cilinderaansluiting Oxygen
RU 3
RU 6
RI 2
RH
RH
RH
NEN 3268
NEN 3268
NEN 3268
NEN 3268
High pressure flexible hose equipped with a loop
Many-Flow valve block
B260033
B260034
B260036
B260037
Wall brackets
Stainless steel wall bracket 1 cylinder
Stainless steel wall bracket 2 cylinders
A045058
A045059
A045070
Rotam flowmeter 0-30 l/min brass
Rotam 30 Plus AR/CO2
0-30 l/min
Rotam 30 Plus AR/CO2
0-30 l/min
Rotam 30 Plus Helium
0-30 l/min
A045047
Twin connection, blind plug, Rotam 30
Twin connextion
Katje Welding bv
1/4“ x 1/4”
1/4” x 1/4”
1/4” x 21.8
1/4” x 21.8
1/4“ x 1/4”
1/4“ x 1/4”
Connection yoke
W 24.32 x 1/14”
W 28.806 x 1/14”
G 5/8” (22.9 x 1/14”)
4.5 bar inlet G 3/8” female outlet G 3/8” male
blind plug
page 14
Rotam 30 Plus
2015-2016
Regulators CATWELD Dincontrol
Catweld Dincontrol, 2 pressure gauges, EN 2503. Max primary pressure 200 bar
Art.no.
Gas
A046000
A046010
A046011
A044712
A044713
A044714
Acetylene NL
Oxygen NL
Carbon Dioxide
Air
Nominal
working
pressure
bar
0- 1.5
0-10.0
0-10.0
0-10.0
0-10.0
0-10.0
Primary
pressure
gauge
scale bar
0- 40
0-315
0-315
0-315
0-315
0-315
Secondary
pressure
gauge
scale bar
0- 2.5
0-16.0
0-16.0
0-16.0
0-16.0
0-16.0
NEN 3268
Connection yoke
G 5/8” (22.9 x 1/14”)
W 21.8 x 1/14”
W 24.32 x 1/14”
W 28.806 x 1/14”
W 21.8 x 1/14”
RI 2
RU 1
RU 3
RU 6
LU 1
RH
RH
RH
RH
LH
Catweld Dincontrol Acetylene
Catweld Dincontrol, 2 gauges (l/min), EN 2503. Max primary pressure 200 bar
Designed for MIG welding processes.
Art.no.
Gas
A046020
A046021
A046022
A046023
A046024
Argon/mixtures
Mison
Carbon Dioxide
Calibration gas
Nominal
flow
gauge
l/min
0-24 l/min
0-24 l/min
0-24 l/min
0-50 l/min
0-24 l/min
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
0-315
0-315
Secondary
flow
gauge
scale l/min
0-32 l/min
0-32 l/min
0-32 l/min
0-75 l/min
0-32 l/min
NEN 3268
W 24.32 x 1/14”
W 1” (25.4 x 1/8”)
W 21.8 x 1/14”
W 21.8 x 1/14”
W 1” (25.4 x 1/8”)
RU 3
RU 4
RU 1
LU 1
LU 4
RH
RH
RH
LH
LH
Catweld Dincontrol with flowmeter Argon/CO2
Catweld Dincontrol, 1 pressure gauge and 1 flowmeter, EN 2503. Max primary pressure 200 bar
Designed for TIG welding processes.
Art.no.
Gas
A046050
A046052
A046054
A046056
A046057
A046058
A046059
Carbon Dioxide
Argon/mixtures
Carbon Dioxide
Argon/mixtures
Mison
Mison
Katje Welding bv
Preset
working
pressure
bar
4.5
4.5
4.5
4.5
4.5
4.5
4.5
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
0-315
0-315
0-315
0-315
page 15
Max
capacity
flowmeter
l/min
2-30 l/min
2-30 l/min
2-16 l/min
2-30 l/min
2-16 l/min
2-30 l/min
2-30 l/min
NEN 3268
W 21.8 x 1/14”
W 24.32 x 1/14”
W 21.8 x 1/14”
W 24.32 x 1/14”
W 1” (25.4 x 1/8”)
W 1” (25.4 x 1/8”)
W 21.8 x 1/14”
RU 1
RU 3
RU 1
RU 3
RU 4
RU 4
LU 1
RH
RH
RH
RH
RH
RH
LH
2015-2016
Regulators CATWELD Dincontrol
Catweld Dincontrol, 1 pressure gauge, EN 2503
Art.no.
Gas
A046015
Propane (SHELL)
Nominal
working
pressure
bar
0-1.5
Secondary
pressure
gauge
scale bar
0-2.5
NEN 3268
W 21.8 x 1/14”
LU 1
LH
Art.no.
Gas
A046030
A046031#
A046032#
A046033
Airco 2 ACME/FLARE
Airco 1 FLARE
Air
Nominal
working
pressure
bar
0-30.0
0-30.0
0-30.0
0-30.0
Primary
pressure
gauge
scale bar
0-315
0-315
0-315
0-315
Secondary
pressure
gauge
scale bar
0-60.0
0-60.0
0-60.0
0-60.0
NEN 3268
W 24.32 x 1/14”
W 24.32 x 1/14”
W 24.32 x 1/14”
W 28.806 x 1/14”
RU 3
RU 3
RU 3
RU 6
RH
RH
RH
RH
Flow diagrams
Acetylene
Oxygen
The capacity graphs show the outlet pressure as a function of the flow rate at different pressures (P1).
Art.no.
Gas
A046061
A046062
A046063
Nitrogen
Argon/mixtures
Nominal
working
pressure
bar
0-10.0
0-10.0
0-24 l/min
Primary
pressure
gauge
scale bar
0-400
0-400
0-400
Secondary
pressure
gauge
scale bar
0-16.0
0-16.0
0-32 l/min
Side entry
according NEVOC 5145
NEVOC
NEVOC
NEVOC
Wika (pressure) gauges EN 562 Ø 62 mm 1/4” bottom entry
AGA (pressure) gauges EN 562 Ø 50 mm 1/4” bottom entry
A049900
A049901
A049902
A049903
A049904
A049905
A049906
A049907
A049908
A049909
A049911
A049910
A049912
A045030
A045040
A045041
A045032
A045042
A045044
A045034
A045036
Oxygen
Oxygen
Oxygen
Acetylene
Acetylene
Formeer
Argon/mixtures
Argon/mixtures
Neutral
Neutral
Neutral
Neutral
Neutral
0-10/16
0-20/40
0-200/315
0-1.5/2.5
0-18/40
0-50
0-200/315
0-32
0-10/16
0-200/315
0-30/60
0-1.5/2.5
0-300
bar
bar
bar
bar
bar
l/min
bar
l/min
bar
bar
bar
bar
bar
Acetylene
Oxygen
Oxygen
Acetylene
Oxygen
Argon/mixtures
Propane
Argon/mixtures
0-40
0-315
0-400
0-2.5
0-16
0-35
0-6
0-32
bar
bar
bar
bar
bar
l/min
bar
l/min (PC 101)
AGA pressure gauges EN 562 Ø 50 mm 1/4” rear entry
B260350
B260352
B260354
B260356
Acetylene
Oxygen
Acetylene
Oxygen
Katje Welding bv
0-40
0-315
0-2.5
0-25
bar
bar
bar
bar
page 16
2015-2016
Regulators CATWELD Standard
Catweld Standard, 2 pressure gauges, EN 2503. Max primary pressure 200 bar
Art.no.
Gas
A047000
A047010
Acetylene NL
Oxygen
Nominal
working
pressure
bar
0- 1.5
0-10.0
Primary
pressure
gauge
scale bar
0- 40
0-315
Secondary
pressure
gauge
scale bar
0- 2.5
0-16.0
NEN 3268
Connection yoke
G 5/8” (22.9 x 1/14”)
RI 2
RH
Catweld Standard Acetylene
Catweld Dincontrol, 2 gauges (l/min), EN 2503. Max primary pressure 200 bar
Art.no.
Gas
A047020
Argon/mixtures
Nominal
flow
gauge
l/min
0-24 l/min
Primary
pressure
gauge
scale bar
0-315
Secondary
flow
gauge
scale l/min
0-32 l/min
NEN 3268
W 24.32 x 1/14”
RU 3
RH
Catweld Standard Argon/CO2
Flow diagrams
Acetylene
Katje Welding bv
page 17
Oxygen
2015-2016
Regulators CATWELD
Catweld regulator, 2 pressure gauges, EN 2503. Max primary pressure 200 bar
Art.no.
Gas
A048000
A048010
Acetylene NL
Oxygen NL
Nominal
working
pressure
bar
0- 1.5
0-10.0
Primary
pressure
gauge
scale bar
0- 40
0-315
Secondary
pressure
gauge
scale bar
0- 2.5
0-16.0
NEN 3268
Connection yoke
G 5/8” (22.9 x 1/14”)
RI 2
RH
Catweld regulator, 2 gauges (l/min), EN 2503. Max primary pressure 200 bar
Art.no.
Gas
A048020
Argon/mixtures
Nominal
flow
gauge
l/min
0-25 l/min
Primary
pressure
gauge
scale bar
0-315
Secondary
flow
gauge
scale l/min
0-32 l/min
NEN 3268
W 24.32 x 1/14”
RU 3
RH
Catweld Oxygen
Catweld regulator, 1 pressure gauge and 1 flowmeter, EN 2503. Max primary pressure 200 bar
Designed for TIG welding processes.
Art.no.
Gas
A048040
Catweld Flowmeter
Argon/mixtures
Preset
working
pressure
bar
3.5
Primary
pressure
gauge
scale bar
0-315
Max
capacity
flowmeter
l/min
0-25 l/min
NEN 3268
W 24.32 x 1/14”
RU 3
RH
Catweld with flowmeter Argon/CO2
Katje Welding bv
page 18
2015-2016
Cylinder coupling adapters, gaskets
A265408#
A265410#
A265412#
A265414#
A265415#
A265416#
A265417#
A265418#
A265424#
A265425#
A265428#
A265434#
A265436#
A265438#
A265439#
A265450#
A265446#
Cylinder coupling adapters
Cylinder
21.8 LH-female x 24.32 RH-male
LU 1
21.8 RH-female x 5/8” RH-female
RU 1
21.8 RH-female x 24.32 RH-male
RU 1
RU 3
RU 3
RU 3
RU 3
RU 4
RU 6
RU 6
5/8” RH-male x 21.8 RH-male
RI 2
5/8” RH-male x 24.32 RH-male
RI 2
21.8 RH-female x 21.8 LH-male
RU 1
21.8 LH-female x 5/8” LH-female
LU 1
24.32 RH-female x 25.4 LH-male
RU 3
Adapter Mison
RU 4
POL LH swivel adapter male x SHELL LH male
Regulator
RU 3
RI 2
RU 3
RI 2
RU 4
RU 1
RU 6
RU 3
RI 2
RU 3
RU 1
RU 3
LU 1
POL
LU 4
RU 3
MOST ADAPTERS SHOULD ONLY BE USED FOR SHORT PERIODS OF TIME. A SPECIFIC REGULATOR WILL BE REQUIRED FOR
EACH SPECIFIC TYPE OF GAS IN CYLINDERS AND CENTRAL GAS SYSTEMS.
A711650
A264338
A264340
A264341
A264342
A264345
Gaskets, cylinder coupling adapters female
Rubber gasket universal Acetylene
Delrin®
16 x
9.2 x 2 mm
LU 0
Delrin®
18 x 12.2 x 2 mm
LU 1 RU 1
®
Delrin
20 x 12.2 x 2 mm
RU 3
Delrin®
25 x 12.2 x 2 mm
RU 6
Delrin®
21 x
8 x 2 mm
RU 4 LU 4
Adapters foreign countries available upon request, always state the type of gas and country.
Katje Welding bv
page 19
2015-2016
Katje Welding bv
page 20
2015-2016
Welding system The Little Torch
A023000#
Packaged in a display box.
Contents:
1 aluminum alloy body
5 welding attachments
5-36-65-77-94 ltr/h (nr. 3 t/m 7)
Fuel gas hose (red)
Oxygen hose (green)
1 adapter G1/4” - G3/8”.
L=173 cm
L=173 cm
The Little Torch feels right in your hand. It is just a fraction wider and longer than your middle finger.
It has unmatched flexibility:
- jewellery & art repair
- soldering
- electronics.
The Little Torch superbly balanced torch with a rugged aluminum alloy body weighs only 43 gram.
The Little Torch can be used with several fuels including acetylene, hydrogen, propane, propylene, MAPP ® or natural gas.
The Little Torch produces a perfectly controlled, stable flame up to 3200°C.
The Little Torch includes an aluminum alloy body, size 3-7 curved tips and colour coded oxy-fuel hoses.
Katje Welding bv
page 21
2015-2016
A023000#
A023012#*
A023013#*
A023014#*
A023015#*
A023016#*
A023017#*
Welding attachment straight
LT welding attachment straight nr. 2
A023021#*
A023022#
A023023#
A023024#
A023025#
A023026#
A023027#
Welding attachment curved
LT welding attachment curved nr. 1
A023031#*
A023032#*
A023033#
A023034#
A023035#
A023036#
Welding attachment twin
LT welding attachment twin nr. 1
A023042#
Heating attachment multi flame Acetylene
LT heating attachment multiflame AC/H2 nr. 2
A023048#
Heating attachment multiflame Natural gas/ Propane
LT heating attachment multiflame PR nr. 3
A023051#
Extension pipe
LT extension pipe 3”
A023058#
LT magnetic torch stand
A023003##
A023004##
A023005##
Hose
Litlle Torch flexible hose oxygen
Little Torch flexible hose fuel gas
Little Torch hoseclamp (brass collar)
Katje Welding bv
page 22
2015-2016
Soldering and brazing torch HBL
A023070#
A023071#
A023072#
A023073#
A023074#
A023075#
A023076#
A023077#
Soldering and brazing torch HBL Acetylene*
Soldering and brazing set HBL Acetylene
Shank HBL
Extension pipe HBL
Nozzle nr. 1 HBL
Nozzle nr. 2 HBL
Nozzle nr. 3 HBL
Nozzle nr. 4 HBL
Nozzle nr. 5 HBL
Soldering is a process in which two metal items are joined together by melting and flowing a filler metal (solder) into the joint, the filler metal
having a lower melting point than the workpiece.
Nozzle operating data HBL
Nozzle
AC consumption
Nr. 1
Nr. 2
Nr. 3
Nr. 4
Nr. 5
14 ltr/h
28 ltr/h
165 ltr/h
310 ltr/h
850 ltr/h
Working
pressure
0.5 bar
0.5 bar
0.5 bar
0.5 bar
0.8 bar
*As long as supplies last.
Katje Welding bv
page 23
2015-2016
Welding and cutting system AGA X-11 Original
A023101
Welding and cutting system X-11 Original Injector EN ISO 5172
In synthetic casing.
Cutting capacity max 100 mm.
Contents:
1 shank with quick connecting nut
6 welding attachments DIN 80-160-315-500-800-1000 ltr
1 cutting attachment 90° lever
3 cutting nozzles type HA-411 (3-50 mm)
1 set cleaning needles
1 spanner 6-gap
3 teflon washers
1 set non return valves BV-11.
A023102
Welding and cutting system X-11 Original Nozzle Mix EN ISO 5172
In synthetic casing.
Contents:
2 cutting nozzles type Coolex® A-311 (3-10 mm, 25-50 mm)
1 spanner 6-gap
3 teflon washers
1 set non return valves BV-11.
A023103
Welding system X-11 Original Mini EN ISO 5172
In metal casing.
Contents:
3 welding attachments DIN 160-230-315 ltr
3 teflon washers.
A023104
Welding system X-11 Original CV EN ISO 5172
In metal casing.
Contents:
3 welding attachments DIN 160-230-315 ltr
2 flexible welding attachments 90° 160-315 ltr
3 teflon washers.
X-11 is a complete system comprising of everything you need for general purpose
welding and cutting requirements. The welding attachments are made of chrome
plated copper for efficient heat dissipation and are fully swaged to give a perfect flame.
The quick connecting nut enables rapid exchange of the welding head and the cutting
attachment. A large number of accessories increase the flexibility of the X-11 torch
system.
Katje Welding bv
page 24
2015-2016
Welding and cutting system LX-14
A026500
Welding and cutting system LX-14
In metal casing.
Contents:
1 shank with connection nut and hose nipples
5 welding attachments DIN 80-160-315-500-800 ltr
2 cutting nozzles (3-40 mm)
1 twin wheel cutting guide
1 radius arm with centre point
2 spanners
1 set cleaning needles.
A026501
Welding system LX-14
In metal casing.
Contents:
1 shank with connection nut and hose nipples
2 flexible welding attachments DIN 160-400 ltr
2 welding attachments DIN 300-500 ltr
1 heating attachment multiflame DIN 500 ltr.
A026502
Welding and cutting system LX-14 Plus
Contents:
1 welding and cutting system LX-14
1 regulator CATWELD Acetylene with connection yoke
1 flashback arrestor 3/8”L
1 regulator CATWELD Oxygen RI 2
LX-14 is a professional kit especially designed for installation purposes. Flow adjustment is easily done by means of the compact oxygenand gas valve. The welding nozzles, mounted separately on the welding attachments, can be replaced easily.
Katje Welding bv
page 25
2015-2016
Welding and cutting system AGA X-21 Original
A021300
Welding and cutting system X-21 balanced pressure principle EN ISO 5172
In metal casing.
Contents:
1 shank round, with connection nut and hose nipples
1 cutting attachment nozzle mix 90° lever
3 cutting nozzles type Coolex® A-311 (3-50 mm)
1 twin wheel cutting guide
1 spanner 6-gap
1 set O-rings.
A021301
Welding and cutting system X-21 balanced pressure principle EN ISO 5172
According A021300, however equipped with an oval shank, connection nut and hose nipples.
A021302
Welding and cutting system X-21, cutting attachment injector AC EN ISO 5172
Equipped with a round shank and a cutting attachment 90° lever, including MA-133D cutting nozzles.
A021303
Welding and cutting system X-21, cutting attachment injector AC EN ISO 5172
According A021302, however equipped with an oval shank, connection nut and hose nipples.
A051041
A051042
A051120
A051121
Accessories
Non return valves BV-11 3/8”L
Non return valves BV-11 3/8”
Non return valves BV-12 3/8” x 9.0 mm
Non return valves BV-12 3/8”L x 9.0 mm
X-21 is a versatile, complete torch system, cutting attachment 90° with injector or balanced pressure principle, round or oval shank for all
medium and heavy duty cutting, welding and heating jobs.
X-21 can be used in the following operations:
- welding in thicknesses up to 14 mm
- cutting in carbon steel in thicknesses up to 500 mm, circle cutting, hole cutting, bevel cutting, rivet washing
- brazing and braze welding
- heating, bending, straightening
- gouging
- flame-cleaning.
A021678
Cutting attachment 75° lever, elongated 955 mm
A021677
Cutting attachment 75° lever, elongated 655 mm
A021500
Cutting attachment 90° lever
A021461
A021462
A021463
Heating attachment Acetylene
Heating attachment Acetylene multiflame
Katje Welding bv
1.000 ltr
2.500 ltr
5.000 ltr
page 26
2015-2016
Katje Welding bv
page 27
2015-2016
Cutting torch AGA X-511 Diamond
A024105
Cutting torch X-511 Diamond
cutting Oxygen lever
nozzle head
90°
length
470 mm
1/4” x 3/8”L
A024108
nozzle head
90°
length
470 mm
3/8” x 3/8”L
A024107
nozzle head
105°
length
470 mm
1/4” x 3/8”L
A024106
nozzle head
180°
length
470 mm
1/4” x 3/8”L
A024097
nozzle head
105°
length
855 mm
1/4” x 3/8”L
A024096
nozzle head
180°
length
855 mm
1/4” x 3/8”L
A024101
nozzle head
105°
length
1115 mm
1/4” x 3/8”L
A051041
A051042
A051120
A051121
Accessories
A021541
Nozzle nut (heavy duty)




Safe and robust
Low weight
Large capacity
Accessories for several applications
X-511 Diamond is made for nozzle mix nozzles and has capacity enough for cutting more than 500 mm.
Easy to handle.
Oval handle for positive grip. The screw valves for regulation of preheating oxygen and fuel gas are forward mounted for easiest control of the
flame. The cutting oxygen lever is specially designed to give maximum control of all operations, ideal for piercing, gouging and rivet washing.
Safe and robust.
Control knobs, handles, tubes AC/OX with a long track record for durability.
The special valves have a self centering stainless steel valve stem for positive seating and long life.
Several accessories available upon request.
Katje Welding bv
page 28
2015-2016
Cutting torch CATWELD X-31
A024150
nozzle head
90°
length
500 mm
3/8” x 3/8”L
A024151
nozzle head
90°
length
500 mm
1/4” x 3/8”L
A024148
nozzle head
180°
length
500 mm
3/8” x 3/8”L
A024152
nozzle head
105°
length
700 mm
3/8” x 3/8”L
A024154
nozzle head
105°
length
900 mm
3/8” x 3/8”L
A024156
nozzle head
105°
length
1100 mm
3/8” x 3/8”L
A051041
A051042
A051120
A051121
Accessories
●
●
●
●
Safe and robust
Rugged design proved over many years in service
Well balanced design for long fatique-free operation
Stainless steel valve stem for positive seating and long life
CATWELD X-31 replaces AGA X-31 and Corona cutting torches and is a reliable, sturdy, yet light-weight
cutting torch for nozzle mix nozzles. Its weight is approximately 1.2 kg.
The fuel gas and the oxygen are mixed in the nozzle, thereby restricting the volume of gas mixture and ensuring a high degree of safety against
backfire and flashback.
A large number of nozzles and accessories enables CATWELD X-31 to be used for cutting sheet metal, general cutting work, cutting on heavy
gauge materials, cutting circles and bevels, cutting of rivets, scrap cutting, gouging etcetera.
Katje Welding bv
page 29
2015-2016
Katje Welding bv
page 30
2015-2016
Cutting nozzles (injector) Acetylene
A023401
A023402
A023403
A023404
A023405
AGA X-11/AGA Kombi 14-G Maxi
Cutting nozzle
13
Cutting nozzle
38
Cutting nozzle
820
Cutting nozzle
20 50
Cutting nozzle
50 - 100
A051929
AGA X-311/BM-30-31/Jetstream/AGA X-501-A/AGA X-21 INJ
Cutting nozzle
2.5 5
TINEX
HA-411-1
HA-411-2
HA-411-3
HA-411-4
HA-411-5
Tinex is specially designed for thin plate cutting purposes. The heating flame is
extremely low and specially adapted for thin plate. The inner nozzle with its
cylindrical cutting orifice eliminates the need of high cutting oxygen pressures.
A051930
A051931
A051932
A051933
A051934
A051935
A051936
A051937
AGA X-311/BM-30-31/Jetstream/AGA X-501-A/AGA X-21 INJ
Nozzle complete
38
MA-133D-0
Nozzle complete
815
MA-133D-1
Nozzle complete
15 30
MA-133D-2
Nozzle complete
30 50
MA-133D-3
Nozzle complete
50 70
MA-133D-4
Nozzle complete
70 - 100
MA-133D-5
Nozzle complete
100 - 200
MA-133D-6
Nozzle complete
200 - 300
MA-133D-7
A051948
A051949
Outer nozzle
Outer nozzle
3 - 100
100 - 300
A051940
A051941
A051942
A051943
A051944
A051945
Inner nozzle
Inner nozzle
Inner nozzle
Inner nozzle
Inner nozzle
Inner nozzle
38
815
15 30
30 50
50 70
70 - 100
A051008
A051009
BM-30-31/Jetstream
Cutting nozzle Jetex 1
Cutting nozzle Jetex 2
33-
40
70
MA-133D
MA-133D
MA-133D-0
MA-133D-1
MA-133D-2
MA-133D-3
MA-133D-4
MA-133D-5
MA-143-1
MA-143-2
JETEX high speed cutting nozzles which uses acetylene as a fuel gas and a
protective oxygen curtain surrounding the cutting stream. In spite of extremely
high cutting speed, the cutting surface is of top quality, which means shorter cutting time and less finishing work. The nozzle is manufactured in
3 parts; an outer nozzle and a two-part inner nozzle. The nozzle is made completely of copper, for good heat dissipation, and the outer nozzle is
furthermore nickel/chromium plated to reject cutting spatter and to improve heat dissipation. The slot part of the inner nozzle has a surface
treatment of chromium plating.
A022430
A022431
A022432
Gouging nozzle AGA X-311/AGA X-501-A/AGA X-21 INJ
Jet Groover 0
24
joint depth
Jet Groover 1
46
joint depth
Jet Groover 2
58
joint depth
Jet Groover heating flames shortens the start-up time of the gouging process.
The whole gouging nozzle is made of copper for better heat dissipation;
the outer nozzle is also chromium plated.
A022120
A022121
A022122
A022123
A022124
Cutting nozzle HL-Precioso
Cutting nozzle
310
Cutting nozzle
10 20
Cutting nozzle
20 50
Cutting nozzle
50 - 100
Cutting nozzle
100 - 150
A051050
A051051
A051052
A072262
Accessories
Nozzle cleaning powder KR-21
Wire brush, brass, small
Wire brush, brass, 4 rows
Set cleaning needles AGA
HL-PRECIOSO
HL-PRECIOSO
HL-PRECIOSO
HL-PRECIOSO
HL-PRECIOSO
Cutting tables available upon request.
Katje Welding bv
page 31
2015-2016
Cutting nozzles (injector) Propane
A023411
A023412
A023413
A023414
AGA X-11
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
A022410
A022411
A022412
A022413
A022414
A022415
A022416
A022417
AGA X-311/Jetstream/AGA X-21 INJ
Cutting nozzle
510
Cutting nozzle
10 15
Cutting nozzle
15 30
Cutting nozzle
30 50
Cutting nozzle
50 70
Cutting nozzle
70 - 100
Cutting nozzle
100 - 200
Cutting nozzle
200 - 300
A022440
A022441
A022442
A022443
A022444
A022445
A022446
A022447
A022448
X-501-PH (Harris)
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
A022450
A022451
A022452
A022453
A022454
A022455
Scrap cutting nozzle X-501-PH (Harris)
Cutting nozzle
625
Cutting nozzle
25 50
Cutting nozzle
50 75
Cutting nozzle
75 - 150
Cutting nozzle
150 - 200
Cutting nozzle
200 - 300
A022419
A022420
BM-30-31/Jetstream
Cutting nozzle
Cutting nozzle
1310 20 -
3
10
20
50
25
510
10 15
15 25
25 50
50 75
75 - 150
150 - 200
200 - 300
55-
40
70
HP-433-1
HP-433-2
HP-433-3
HP-433-4
MP-133-0
MP-133-1
MP-133-2
MP-133-3
MP-133-4
MP-133-5
MP-133-6
MP-133-7
000-NX
00-NX
0-NX
1-NX
2-NX
3-NX
4-NX
5-NX
6-NX
1-NFF
2-NFF
3-NFF
4-NFF
5-NFF
6-NFF
PROPEX 1
PROPEX 2
Propex nozzles are ultra high speed cutting nozzles for propane. The nozzle
is manufactured in three parts; the outer nozzle is made of copper, nickel and chromium.
The extra protective oxygen curtain and the expanding cutting orifice will result in extreme high cutting speeds.
Cutting nozzles (injector) Tetrene - Mapp - Apachi - Thermolene
A022390
A022391
A022392
A022393
A022394
A022395
A022396
AGA X-311/BM-30-31/Jetstream/AGA X-21 INJ
Cutting nozzle
610
MY-133-0
Cutting nozzle
10 15
MY-133-1
Cutting nozzle
15 30
MY-133-2
Cutting nozzle
30 50
MY-133-3
Cutting nozzle
50 70
MY-133-4
Cutting nozzle
70 - 100
MY-133-5
Cutting nozzle
100 - 200
MY-133-6
A051050
A051051
A051052
A072262
Accessories
Katje Welding bv
page 32
2015-2016
Cutting nozzles (nozzle mix) Acetylene
A021600*
A021610*
A021611*
A021612*
A021613*
A021614*
A021616*
A021617*
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
A021640
Rivet cutting nozzle (consult Coolex®)
Joint depth
10 75
ARC
A021636*
Gouging nozzle (consult Coolex®)
Joint depth
10 15
SA-355-12
A021637
A021638
A021639
Gouging nozzle (stellite support)
Joint depth
39
Joint depth
611
Joint depth
912
R-FGA-1
R-FGA-2
R-FGA-3
A025440
A025441
A025442
Joint depth
38
Joint depth
611
Joint depth
10 13
A-351-B-13
A-351-B-19
A-351-B-25
1310 25 50 100 200 300 -
3
10
25
50
100
200
300
500
HA-311-1
HA-311-2
HA-311-3
HA-311-4
HA-311-5
HA-311-6
HA-311-7
HA-311-8
*As long as supplies last.
CATWELD cutting nozzles (nozzle mix) Acetylene
A021552
A021553
A021554
A021555
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
310
10 25
25 50
50 - 100
A-311-2
A-311-3
A-311-4
A-311-5
KOIKE cutting nozzles (nozzle mix)
A051300
A051301
A051302
A051303
A051304
A051305
A051306
A051307
A051308
A051309
Acetylene standard
Cutting nozzle 3 Cutting nozzle 5 Cutting nozzle 10 Cutting nozzle 15 Cutting nozzle 30 Cutting nozzle 40 Cutting nozzle 50 Cutting nozzle 100 Cutting nozzle 150 Cutting nozzle 250 -
A051310#
A051311#
A051312#
A051313#
A051314#
A051315#
A051316#
A051317#
A051318#
A051319#
Acetylene high speed
Cutting nozzle 3 5 00-102D7
Cutting nozzle 50 - 100 5-102D7
5
10
15
30
40
50
100
150
250
300
00-102
0-102
1-102
2-102
3-102
4-102
5-102
6-102
7-102
8-102
A051320
A051321
A051322
A051323
A051324
A051325
A051326
A051327
A051328
A051329
Propane standard
Cutting nozzle 3 Cutting nozzle 5 Cutting nozzle 10 Cutting nozzle 15 Cutting nozzle 30 Cutting nozzle 40 Cutting nozzle 50 Cutting nozzle 100 Cutting nozzle 150 Cutting nozzle 250 -
A051330#
A051331#
A051332#
A051333#
A051334#
A051335#
A051336#
A051337#
A051338#
A051339#
Propane high speed
5
10
15
30
40
50
100
150
250
300
00-106
0-106
1-106
2-106
3-106
4-106
5-106
6-106
7-106
8-106
Alternative KOIKE cutting nozzles available upon request.
Katje Welding bv
page 33
2015-2016
Coolex® cutting nozzles (nozzle mix) Acetylene
A025401
A025402
A025403
A025404
A025405
A025406
A025407
A025408
Cutting nozzle
Cutting nozzle Coolex®
13
310
®
Cutting nozzle Coolex
10 25
Cutting nozzle Coolex® 25 50
Cutting nozzle Coolex® 50 - 100
®
Cutting nozzle Coolex 100 - 200
A-311-1
A-311-2
A-311-3
A-311-4
A-311-5
A-311-6
A-311-7
A-311-8
A025409
A025410
325 -
25
38
A-191-2 (elongated L= 178 mm)
A-191-3 (elongated L= 178 mm)
A025430
A025431
A025432
A025433
Gouging nozzle (elongated)
Joint depth
3Joint depth
6Joint depth
8Joint depth
10 -
8
11
11
13
A-353-BL- 6 Coolex®
A-353-BL- 8 Coolex®
A-353-BL-10 Coolex®
A-353-BL-12 Coolex®
A021647
A021648
A021649
Joint depth
39
Joint depth
611
Joint depth
912
R-FGA-1 Coolex®
R-FGA-2 Coolex®
R-FGA-3 Coolex®
A025420
A025421
A025422
Gouging nozzle
Joint depth
Joint depth
Joint depth
8
11
11
A-355-L- 6 Coolex®
A-355-L- 8 Coolex®
A-355-L-10 Coolex®
A025412
A025413
A025414
A025415
Rivet cutting nozzle
Joint depth
Joint depth
Joint depth
Joint depth
525
25 50
50 - 100
100 - 200
A-341-BL-2 Coolex®
A-341-BL-3 Coolex®
A-341-BL-4 Coolex®
A-341-BL-5 Coolex®
A021641
A021642
A021643
A021644
A021645
Scrap cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
Cutting nozzle
350 100 200 300 -
A-317-1 Coolex®
A-317-2 Coolex®
A-317-3 Coolex®
A-317-4 Coolex®
A-317-5 Coolex®
368-
50
100
200
300
500
A051050
A051051
A051052
A072262
Accessories
COOLEX® means a major breakthrough of cutting nozzles all over the world. COOLEX® is the result of an extensive development program from
GCE, world’s major producer of cutting nozzles.
The basic construction of the conventional (nozzle mix) cutting nozzles has been unchanged throughout the years. However, GCE developed
COOLEX® cutting nozzles with a minute hole connecting the heating oxygen and the cutting oxygen channels. During preheating a thin stream
of heating oxygen flows (cooling flow) into the cutting oxygen channel.
COOLEX® extends effective service life by up to 600%.
Tests have shown that the COOLEX® cutting nozzle lasts up to six times longer than its traditional counterpart. Channel wear and tear is
minimized as cleaning is seldom if ever required. The secret lies in the thin stream of heating oxygen that flows into the cutting oxygen channel
during preheating. The nozzle is consequently cooled and hinders the build up of metallic ash and metal spray. The increased oxygen
consumption is very modest, some 25-50 l/h.
Katje Welding bv
page 34
2015-2016
Cutting nozzles (nozzle mix) Propane - Tetrene - Mapp - Apachi
A021771
A021772
A021773
A021774
A021775
A021776
A021777
A021778
A021779
A021780
AGA Tetrene, Mapp, Apachi
Cutting nozzle Tetrene
4Cutting nozzle Tetrene
12 Cutting nozzle Tetrene
80 Cutting nozzle Tetrene 150 Cutting nozzle Tetrene 200 Cutting nozzle Tetrene 250 Cutting nozzle Tetrene 300 -
A021760
A021761
A021762
A021763
A021764
A021765
A021766
A021767
A021768
CATWELD Propane 10 pre-heat channels
Cutting nozzle Propane
36
612
Cutting nozzle Propane 12 25
Cutting nozzle Propane 50 - 100
229229229229229229229229229-
0
1
2
3
4
5
6
7
8
A021571
A021572
A021573
A021574
A021575
A021576
A021577
CATWELD Propane 9 pre-heat channels
310
PROPROPROPROPROPROPRO-
1
2
3
4
5
6
7
12
25
40
60
80
150
200
250
300
350
AFS- 1
AFS- 2
AFS- 3
AFS- 4
AFS- 5
AFS- 6
AFS- 7
AFS- 8
AFS- 9
AFS- 10
Coolex® cutting nozzles (nozzle mix) Propane
A025611
A025612
A025613
A025614
A025615
A025616
A025617
A025618
Cutting nozzle
13
310
®
50 - 100
P-331-1
P-331-2
P-331-3
P-331-4
P-331-5
P-331-6
P-331-7
P-331-8
A021751
A021752
A021753
A021754
A021755
Scrap cutting nozzle
350
P-337-1
P-337-2
P-337-3
P-337-4
P-337-5
A051050
A051051
A051052
A072262
Accessories
COOLEX® cuts preheating time.
The heating oxygen that is continuously siphoned off into the cutting oxygen channel, flows out into the flame. In this way the flow of cooling
oxygen speeds up the actual combustion process, this results in a shorter preheating time and most cutting work can begin within a few
seconds.
COOLEX® gives you a cleaner cut.
As the COOLEX® cutting nozzle is chilled during preheating, there is little or no build up of metallic ash and metal spray. This means that not
only is the service life of the nozzle significantly increased, as cleaning is virtually eliminated, but also the COOLEX® cutting nozzle retains its
original shape and precision throughout its life.
Katje Welding bv
page 35
2015-2016
High Speed cutting nozzles (nozzle mix) Acetylene
High speed cutting nozzle (machine cutting)
35
5- 10
®
10 - 25
25 - 40
40 - 60
®
60 - 100
A051230
A051231
A051232
A051233
A051234
A051235
A051236
A051237
A051238
A-MD-HS
A-MD-HS
A-MD-HS
A-MD-HS
A-MD-HS
A-MD-HS
A-MD-HS
A-MD-HS
A-MD-HS
Coolex® high speed cutting nozzles:








high speed cutting nozzle
stable heating flame
extremely short starting time
efficient cooling flow
long service life
chromium inner- and outer nozzles
designed for use with almost all nozzle mix (machine) cutting torches
can be cleaned on site
High speed cutting nozzle (machine cutting)
Cutting nozzle Tritex®
35
5 - 10
®
Cutting nozzle Tritex
10 - 25
25 - 50
50 - 75
®
Cutting nozzle Tritex
75 - 100
100 - 150
150 - 240
240 - 300
A051220
A051221
A051222
A051223
A051224
A051225
A051226
A051227
A051228
Tritex® high speed cutting nozzles:











high cutting accuracy
high speed cuts of superior quality (according DIN EN ISO 9013)
30% increase in speed compared to standard tips
less plate deformation (thin plate)
stable heating flame
extremely short starting time
efficient cooling flow
long service life
chromium/nickel plated outer nozzles, chromium slot part inner nozzles
designed for use with almost all nozzle mix (machine) cutting torches
can be cleaned on site
A072264#
Cleaning needles HS conical Tritex®
Katje Welding bv
page 36
2015-2016
Katje Welding bv
page 37
2015-2016
Hoses
ACETYLENE HOSE RED // OXYGEN HOSE BLUE EN 559
Description
Standard
Liner
Inlays
Cover
Branding
Temperature
Pressure
Lengths
highly flexible and kink resistant top quality Acetylene // Oxygen hose.
EN 559.
black smooth, synthetic rubber SBR/NR, gastight.
textile cord reinforcements.
red // blue ribbed cover, excellent abrasion, weather resistant.
EN 559.
-30°C up to +70°C.
working pressure 20 bar, burst pressure 60 bar.
50 // 100 meter.
A070005
A070015
A070025
A070035
A070036
A070045
A070037
Acetylene hose red EN 559
Acetylene hose
Acetylene hose
Acetylene hose
Acetylene hose
Acetylene hose
Acetylene hose
Acetylene hose
5 x 11 mm
6.3 x 13.3 mm
8 x 16 mm
9 x 16 mm
10 x 18 mm
13 x 23 mm
16 x 26 mm
A070105
A070115
A070125
A070135
A070136
A070138
A070137
Oxygen hose blue EN 559
Oxygen hose
Oxygen hose
Oxygen hose
Oxygen hose
Oxygen hose
Oxygen hose
Oxygen hose
5 x 11 mm
6.3 x 13.3 mm
8 x 16 mm
9 x 16 mm
10 x 18 mm
13 x 23 mm
16 x 26 mm
A070140
A070141
A070142
A070143
A070146
Twin welding hose Oxygen-Acetylene EN 559 (red/blue) smooth
Twin welding hose
Twin welding hose
Twin welding hose
Twin welding hose
Twin welding hose
A070000
A070002
Twin welding hose Oxygen- Acetylene acc. EN 559 (red/blue)
Twin welding hose
Twin welding hose
5 x 5 mm
6 x 6 mm
8 x 8 mm
6 x 9 mm
10 x 10 mm
6 x 6 mm
6 x 9 mm
PROPANE HOSE ORANGE EN 559
Description
Standard
Liner
Inlays
Cover
Branding
Temperature
Pressure
Lengths
highly flexible and kink resistant top quality Propane hose.
EN 559.
black smooth, synthetic rubber SBR/NR, gastight.
textile cord reinforcements.
orange cover, excellent abrasion, weather resistant.
EN 559.
-30°C up to +70°C.
working pressure 20 bar, burst pressure 60 bar.
50 // 100 meter.
A070145
Twin hose for Oxygen-Mapp gases EN 559 (orange/blue)
Twin hose
A070325
Propane hose orange NEN 5654 EN 559
Propane hose
8 x 15 mm
A070194
A070195
A070196
A070197
A070198
Polyethylene hose (MIG/TIG/Plasma/Laser)
LP PE low permeating hose black
6 x 4 mm
8 x 5 mm
9 x 6 mm
10 x 6 mm
12 x 8 mm
A070200
A070201
Dry Flow rubber hose for argon, special developed to prevent moisture from permeating the hose
Argon Dry Flow rubber hose black
6 x 14 mm
Argon Dry Flow rubber hose black
10 x 18 mm
A070148
A070149
A070150
Air/nitrogen hose black, flexible
Air/nitrogen hose
Air/nitrogen hose
Air/nitrogen hose
6 x 8 mm
6 x 14 mm
8 x 16 mm
10 x 18 mm
Lengths 50 // 100 meter.
Katje Welding bv
page 38
2015-2016
Hoses
A070189
A070190
A070193
A070191
Transparent PVC hose, guaranteed non toxic compounds (food industry)
PVC hose
PVC hose
PVC hose
PVC hose
6 x 12 mm
10 x 16 mm
12 x 19 mm
25 x 34 mm
Top grade transparent PVC hose with polyester reinforcements (KTW potable water approved).
Suitable for: ● air
● water
● chemicals
● food.
A070220
A070221
A070222
A070223
Worm drive hose clamp
Hose clamp stainless steel (complete)
8 - 14 mm
11 - 17 mm
13 - 20 mm
15 - 25 mm
A070224
A070225
A070226
A070227
A070228
A070229
A070230
A070231
Crimp hose clamp Oetiker 2-ear
5 - 7 mm
7 - 9 mm
9 - 11 mm
11 - 13 mm
13 - 15 mm
15 - 17 mm
16 - 19 mm
19 - 22 mm
A070250
A070252
Double hose clamp
Double hose clamp
A070240
Heavy duty hose cutter. Heat treated cutting blade and cuts hoses up to 1 1/4”. Anti-rust and anti-wear constructed for long
lasting use.
A070242#
Monier plier for mounting hose clamps.
Katje Welding bv
13 - 15.5 mm
14 - 21.5 mm
page 39
2015-2016
Quick-action couplings
A075607
A075608
A075609
A075606
A075602
A075601
A075617
A075618
A075619
A075616
A075613
A075611
AGA quick-action coupling regulator
Quick-action coupling Acetylene/Propane 3/8”L with coupling pin
Coupling pin Acetylene/Propane
Quick-action coupling Oxygen 3/8” with coupling pin
Coupling pin Oxygen
Coupling pin Oxygen
Coupling pin Oxygen
4.8 mm
6.3 mm
8.5 mm
4.8 mm
6.3 mm
8.5 mm
4.8 mm
6.3 mm
8.5 mm
4.8 mm
6.3 mm
8.5 mm
A075620
A075615
A075621
A075622
A075623
A075624
AGA quick-action coupling hose to hose
Quick-action coupling hose to hose Acetylene/Propane
Quick-action coupling hose to hose Oxygen
4.8 mm
6.3 mm
8.5 mm
4.8 mm
6.3 mm
8.5 mm
Quick-action couplings according DIN 8544 ISO DVS 7289 EN 561
A075850#
A075833#
A075852#
A075855#
A075856#
A075834#
RH IB quick-action coupling hose to hose
RH IB quick-action coupling hose to hose Oxygen
RH IB quick-action coupling hose to hose Acetylene/Propane
A075838#
A075839#
A075843#
A075868#
A075867#
RH IB stainless steel coupling pin torch side
RH IB stainless steel coupling pin torch side Oxygen
RH IB stainless steel coupling pin torch side Acetylene/Propane
RH IB stainless steel coupling pin torch side Acetylene/Propane
A075848#
A075849#
A075853#
RH IB quick-action coupling
RH IB quick-action coupling Oxygen
RH IB quick-action coupling Oxygen
RH IB quick-action coupling Acetylene/Propane
A075844#
A075831#
A075845#
A075866#
A075865#
RH IB quick-action coupling regulator
RH IB quick-action coupling regulator Oxygen
RH IB quick-action coupling regulator Acetylene/Propane
RH IB quick-action coupling regulator Acetylene/Propane
A075835#
A075847#
A075837#
A075840#
A075841#
A075846#
RH IB stainless steel coupling pin
RH IB stainless steel coupling pin Oxygen
RH IB stainless steel coupling pin Acetylene/Propane
5.0 mm
6.3 mm
8.0 mm
5.0 mm
6.3 mm
8.0 mm
3/8”
1/4”
3/8”L
9/16”
9/16”L
3/8” male
1/4” male
3/8”L male
3/8”
1/4”
3/8”L
9/16”
9/16”L
5.0 mm
6.3 mm
8.0 mm
5.0 mm
6.3 mm
8.0 mm
Quick-action couplings for Acetylene/Propane and Oxygen. Safe interruption of gas flow with automatic gas cut-off when disconnecting.
No mixing up by different coding of coupling pins and quick-action couplings.
Katje Welding bv
page 40
2015-2016
Hose connections and fittings
A070445
A070449S
A070450
A070451
A070452
A070453
A070455S
A070456
A070457
A070454S
A070458
A070459
A070460
A070462
A070463
A070464
A070465
A070466
A070467
A070468
A070469
A070470
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
A070515
A070516
A070517
A070518
Hose nipple angled 90°
Hose nipple angled 90° connection nut 1/4” x 6.0 mm
Hose nipple angled 90° connection nut 1/4”L x 6.0 mm
Hose nipple angled 90° connection nut 3/8” x 6.0 mm
Hose nipple angled 90° connection nut 3/8”L x 6.0 mm
A070520
A070521
A070522
A070523
A070524
A070525
A070526
A070527
A070531
A070533
A070535
A070539
A070540
A070541
Connection nut
Connection nut
1/8”
Connection nut
1/4”
Connection nut (hose nipple 8/9 mm)
1/4”
Connection nut
3/8”
Connection nut
1/2”
Connection nut
5/8”
Connection nut
3/4”
Connection nut
1”
Connection nut
M10 x 1.0 mm
Connection nut
M12 x 1.0 mm
Connection nut
M12 x 1.5 mm
Connection nut
1/8”L
Connection nut
1/4”L
Connection nut (hose nipple 8/9 mm)
1/4”L
A070575S
A070577S
A070578
A070579
A070580
A070581S
A070584S
A070585
A070586
A070587S
A070588
Hose tail adapter male
Hose tail adapter
1/8” x
Hose tail adapter
1/4” x
Hose tail adapter
1/4” x
Hose tail adapter
1/4” x
Hose tail adapter
1/4”L x
Hose tail adapter
1/4”L x
Hose tail adapter
3/8” x
Hose tail adapter
3/8” x
Hose tail adapter
3/8” x
Hose tail adapter
3/8”L x
Hose tail adapter
3/8”L x
A070621
A070622
A070623
A070624
A070625
A070626
A070627
A070628
Hose splicer
Hose splicer
Hose splicer
Hose splicer
Hose splicer
Hose splicer
Hose splicer
Hose splicer
Hose splicer
A070640
A070641
A070642
PVC Hose splicer compact
3.0 mm
4.0 mm
6.0 mm
A070645
A070647
Hose splicer small
Hose splicer small
3.0 mm
6.0 mm
1/8” x
1/4” x
1/4” x
1/4” x
1/4” x
1/4” x
3/8” x
3/8” x
3/8” x
3/8” x
3/8” x
3/8” x
3/8” x
1/2” x
1/2” x
1/2” x
1/2” x
1/2” x
5/8” x
3/4” x
3/4” x
3/4” x
A070471
A070472
A070475
A070476
A070477
A070480S
A070481S
A070483
A070484
A070499
A070500
A070501
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
Hose nipple
A070505
A070506
A070507
A070508
A070509
A070511
A070512
Hose nipple elongated
Connection nut
Connection nut
A070542
A070543
A070544
A070545
A070548
A070549
A070550
A070554
A070555
A070556
A070557
A070558
A070559
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
Connection nut
4.0 mm
4.0 mm
6.0 mm
9.0 mm
4.0 mm
6.0 mm
4.0 mm
6.0 mm
9.0 mm
4.0 mm
6.0 mm
A070589
A070593
A070594
A070595
A070596
Hose tail adapter male
Hose tail adapter
Hose tail adapter
Hose tail adapter
Hose tail adapter
Hose tail adapter
4.0 mm
5.0 mm
6.0 mm
8.0 mm
9.0 mm
11.0 mm
13 (12.5) mm
16.0 mm
A070629
A070630
A070634
A070635
A070636
Hose splicer
Hose splicer
Hose splicer
Hose splicer
Hose splicer
Hose splicer
3.5 mm
3.0 mm
3.5 mm
4.0 mm
6.0 mm
8/9 mm
3.0 mm
3.5 mm
4.0 mm
5.0 mm
6.0 mm
8.0 mm
9.0 mm
6.0 mm
8.0 mm
9.0 mm
11.0 mm
13.0 mm
14.0 mm
6.0 mm
9.0 mm
11.0 mm
3/4” x 13.0 mm
3/4” x 16.0 mm
1” x 16.0 mm
1” x 20.0 mm
1” x 25.0 mm
M10 x 4.0 mm
M10 x 6.0 mm
M12 x 4.0 mm
M12 x 6.0 mm
9/16” UNF x 4.0 mm
9/16” UNF x 6.0 mm
9/16” UNF x 8.0 mm
5/8” UNF
5/8” UNF
5/8” UNF
5/8” UNF
5/8” UNF
5/8” UNF
5/8” UNF
M10
M12
M12
9/16” UNF
9/16”L UNF
9/16” UNF
9/16”L UNF
5/8” UNF
5/8”L UNF
4.0 mm
5.0 mm
6.0 mm
7.0 mm
8.0 mm
R male
L male
3/8”L
1/2”L
3/4”L
1”L
x 1.0 mm LH
x 1.0 mm LH
x 1.5 mm LH
x Ø 9.5 mm
x Ø 9.5 mm
x Ø 11.0 mm
x Ø 11.0 mm
x Ø 11.0 mm
x Ø 11.0 mm
3/8”L
1/2”
1/2”
1/2”
1/2”
x 9.0 mm
x 6.0 mm
x 9.0 mm
x 11.0 mm
x 13.0 mm
19.0 mm
20.0 mm
4.0 to 6.0 mm
4.0 to 9.0 mm
6.0 to 9.0 mm
S = small version.
Katje Welding bv
page 41
2015-2016
A070652C
A070653C
A070654C
A070655C
A070658
A070659
A070660
A070661
A070662
A070663
A070664
A070666
A070667
A070668
A070669
A070670
A070671
A070673
Double nipple conical male
Double nipple conical 1/8”
Double nipple conical 1/8”L
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
male
1/8”
1/8”L
1/4”
3/8”
1/4”
1/4”L
1/4”L
3/8”
3/8”L
3/8”L
3/8”
3/8”
3/8”L
3/8”L
1/2”
1/2”
1/2”L
1/2”
A070714
A070716
A070717
Bulk head adapter
Bulk head adapter
Bulk head adapter
Bulk head adapter
1/4” x
3/8” x
3/8”L x
1/4”
3/8”
3/8”L
A070725
A070726
A070727
A070728
Locking nut
Locking nut
Locking nut
Locking nut
Locking nut
1/8”
1/4”
3/8”
3/8”L
A070734
A070735
A070736
A070737
A070738
A070739
A070740
A070741
A070742
A070743
A070744
A070745
A070746
A070748
A070749
A070750
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
female male
1/8” x 1/8”
1/8” x 1/4”
1/4” x 1/8”
1/4” x 1/4”
1/4” x 3/8”
3/8” x 1/4”
3/8” x 3/8”
3/8” x 1/2”
1/2” x 3/8”
1/2” x 1/4”
1/2” x 1/2”
3/4” x 1/2”
3/4” x 3/4”
1/4” x 1/4”L
1/4” x 3/8”L
1/4”L x 3/8”
A070774
A070775
A070776
A070777
A070778
A070779
A070782
Hex coupling nut
Coupling nut
Coupling nut
Coupling nut
Coupling nut
Coupling nut
Coupling nut
Coupling nut
female female
1/8” x 1/8”
1/4” x 1/4”
3/8” x 3/8”
1/2” x 1/2”
3/4” x 3/4”
1” x
1”
3/8” x 3/8”L
A070790
A070791
A070792
A070793
A070794
A070796
A070797
A070798
A070799
A070800
A070801
A070802
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
Elbow 90°
A070805
A070806
A070807
A070808
A070809
A070812
A070813
A070815
A070816
A070817
Tee
Tee
Tee
Tee
Tee
Tee
Tee
Tee
Tee
Tee
Tee
Katje Welding bv
A070674
A070675
A070676
A070677
A070678
A070682
A070683
A070684
A070685
A070686
A070687
A070688
A070695
A070696
A070700
Double nipple conical male
male
Double nipple conical 1/2” x 1/2”L
Double nipple conical 1/2”L x 1/2”L
Double nipple conical 1/2” x 3/4”
Double nipple conical 3/4” x 3/4”
Double nipple conical 3/4” x
1”
Double nipple conical
1” x
1”
1” x
1”L
1”L x
1”L
Double nipple conical 9/16” UNF x 9/16” UNF
Double nipple conical 9/16”L UNF x 9/16”L UNF
Double nipple conical M12/1x 1/4”
C = compact version.
A070729
A070730
A070731
Locking nut
Locking nut
Locking nut
Locking nut
A070751
A070753
A070754
A070755
A070756
A070757
A070758
A070759
A070762
A070763
A070766
A070767#
A070768#
A070770
A070771
Reducing nipple
female male
Reducing nipple
1/4”L x 3/8”L
Reducing nipple
3/8”L x 1/4”
Reducing nipple
3/8” x 3/8”L
Reducing nipple
3/8”L x 3/8”L
Reducing nipple
3/8”L x 3/8”
Reducing nipple
3/8”L x 1/4”L
Reducing nipple
3/8”L x 1/2”L
Reducing nipple
1/2”L x 3/8”L
Reducing nipple 9/16”L UNF x 3/8”L
Reducing nipple 9/16”R UNF x 1/4”R
Reducing nipple 1/4” male x 7/16” UNF male FLARE
Reducing nipple 1/4” male x ACME 1/2” x 16
Reducing nipple ACME ½/16” fem.x 7/16” UNF male FLARE
Reducing nipple M10/1 male x 3/8” male
Reducing nipple M12/1 female x 3/8” male
1/2”
3/4”
1”
2 x 1/8”
male
2 x 1/4”
male
2 x 3/8”
male
2 x 1/2”
male
2 x 3/8”L
male
2 x 1/8”
female
2 x 1/4”
female
2 x 3/8”
female
2 x 1/2”
female
2 x 3/4”
female
2 x 1”
female
1/4” female x 1/4” male
3 x 1/8”
3 x 1/4”
3 x 3/8”
3 x 1/2”
3 x 3/8”L
3 x 1/8”
3 x 1/4”
3 x 3/8”
3 x 1/2”
3 x 3/4”
male
male
male
male
male
female
female
female
female
female
page 42
2015-2016
A070821
A070822
A070823
A070824
A070825
A070826
A070827
A070828
A070829
Elbow (swivel)
Elbow
Elbow
Elbow
Elbow
Elbow
Elbow
Elbow
Elbow
Elbow
A070831
A070832
A070833
A070834
A070835
Cap nut and gasket
Cap nut 1/8” incl. gasket
Cap nut 3/8”L incl. gasket
A070845
A070846
A070847
A070848
Blind plug conical
Blind plug conical 1/4”
A070849
A070850
A070851
A070852
A070853
Socket cap screw
Socket cap screw 1/8” male
A070854
A070855
A070856
A070857
A070858
A070859
A070860
Adapter
Adapter
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
A075780
A075782
A070871
A070873
Manifold 2-way 3/8” female
A075783
Manifold 5-way 1/2” female (wall connection)
A075784
A075790
A075791
A075792
A075793#
A075794#
A075798
A075799
A075800
A075795#
A075796#
A075797#
A075785#
A075786#
A075787#
Ball valve
Ball valve
1/4” female
Ball valve
1/4” female
Ball valve
3/8” female
Ball valve
1/2” female
Ball valve 3-way “T”
Ball valve 3-way “L”
Ball valve
1/4” female
Ball valve
3/8” female
Needle valve 1/4” female
Needle valve 1/4”
Needle valve 3/8”
Needle valve 1/2”
Needle valve 1/4”
Needle valve 3/8”
Needle valve 1/2”
A075695#
A075696#
A075697#
A075698#
A075699#
T-piece cylinder connection
T-piece cylinder connection RI
T-piece cylinder connection RU
T-piece cylinder connection LU
Katje Welding bv
male female
1/4”
x 1/4”
1/4”
x 1/4”L
1/4”
x 3/8”
3/8”L x 3/8”
3/8”L x 3/8”L
3/8”L x 1/4”L
3/8”
x 3/8”
3/8”
x 3/8”L
3/8”
x 1/4”
male
3/8”
1/4”
3/8”
3/8”
1/2”
1/2”
1/2”
x
x
x
x
x
x
x
(swivel)
(swivel)
(swivel)
(swivel)
(swivel)
(swivel)
(swivel)
(swivel)
(swivel)
female
1/4”
1/8”
1/4”
1/8”
1/8”
1/4”
3/8”
x
x
x
x
1/4”
1/4”
3/8”
1/2”
1/4”
1/4”
x 1/4”
x 3/8”
x 1/4”
A070836
A070837
A070839
A070840
A070841
Cap nut and gasket
Cap nut 3/4”
Cap nut 21.8 x 1/14”
Cap nut 21.8 x 1/14”L
Cap nut 24.32 x 1/14”
Cap nut 1/2”L
A034503
Swivelling angled connection 3/8”L
A070861
A070862
A070863
A070864
A070865
A070866
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
Reducing nipple
incl. gasket
incl. gasket
incl. gasket
incl. gasket
incl. gasket
male
3/4”
3/4”
3/4”
1”
1”
M20/1
x
x
x
x
x
x
female
1/4”
3/8”
1/2”
1/2”
3/4”
1/4”
female 15 bar
female 50 bar
female 50 bar
female 50 bar
female 25 bar
female 25 bar
female 30 bar
female 30 bar
male 12 bar
male 15 bar
male 15 bar
male 15 bar
female 15 bar
female 15 bar
female 15 bar
2
1
3
6
1
page 43
2015-2016
Katje Welding bv
page 44
2015-2016
Anti leakage device
Leaking hoses and connections escaping gas or oxygen will often not be noticed and an explosive gas mixture may be formed. There might be
a change that the gasmixture can ignite and explode. OM STOP anti leakage device prevents unintentional and unnoticed escape of (liquid) fuel
gas in the event of damaged hoses, loose connections and burning of hoses. Especially when working in:
- tank compartments
- small vessels and reactors
- inside pipe constructions.
A070406#
A070407#
A070408#
A070409#
A070410#
A070411#
A034465
OM STOP anti leakage device Propane (17 kg/h)
OM STOP GS-17 Propane 3/8”L
OM STOP GS-17 double-hose
L= 5 mtr
L= 10 mtr
L= 20 mtr
OM STOP GS-17 connection nipple 3/8”L
OM STOP GS-17 double nipple
PROPALINE regulator (brass) with pressure gauge, SHELL, inlet connection W21.8 x 1/14”L
A070415#
A070416#
A070417#
A070418#
A070419#
A070420#
A070421#
OM STOP anti leakage device Oxygen (8 nm3/h)
OM STOP S-8 Oxygen 1/4”R
OM STOP S-8 double-hose
L= 5 mtr
L= 10 mtr
L= 20 mtr
OM STOP S-8 connection nipple 1/4”R
OM STOP S-8 connection nipple 3/8”R
OM STOP S-8 double nipple
Alternative models available upon request.
OM STOP anti leakage device works fully automatic:
- prevents unnoticed escape from fuel gas and oxygen in the event of damaged hoses and loose connections
- after determining the cause of the problem it is possible to start the work procedures again
- “easy control” safety device.
Hose reels
A076030##
A076035##
Hose reels
Catweld hose reel Oxygen // Acetylene, 15 meter twin welding hose
Adjustable arm guide (wall connection) for hose reel
Hose length
Medium
Inner diameter
Working pressure
Material
Arm guide
Colour housing
Katje Welding bv
: 15 meter
: Oxygen, Acetylene
: 6.3 mm Oxygen, 9 mm Acetylene
: 20 bar
: high-quality steel construction
: wall connection
: white // blue.
page 45
2015-2016
Propane equipment air aspiration
A034400
A034402#
Proparange handle
Proparange handle, with gas save lever
Proparange handle, without gas save lever
A034410
A034411
A034412
A034413
Proparange hard/soft soldering blowpipe Turbo
Proparange hard/soft soldering blowpipe Turbo TT-12 1.93 kW/h
A034420
A034421
A034422
Proparange hard/soft soldering blowpipe
Proparange hard/soft soldering blowpipe BT-3 0.50 kW/h
A034405
A034406
Lorch/Propaline heating torch
Lorch/Propaline heating torch GT-I 1/2” 4.50 kW/h
Lorch/Propaline heating torch GT-I 1” 5.79 kW/h
A034408
Lorch/Propaline paint stripping torch
Lorch/Propaline paint stripping torch AT-I 1.37 kW/h
A034435
A034436
A034437
A034438
A034439
Proparange stainless steel heating heads
Proparange stainless steel heating heads HT-30 15.5 kW/h
A034450
A034451
A034452
A034453
A034454
A034455
A034456
Proparange stainless steel extension tubes
Proparange stainless steel extension tubes
75 mm
Proparange stainless steel extension tubes 150 mm
Proparange stainless steel extension tubes 1.000 mm
A034460
A034461
Proparange stainless steel fork extension
Proparange stainless steel fork extension 2-flame
Proparange stainless steel fork extension 4-flame
A034463
A034464
A034470
Regulators
Lorch pressure regulator,
12 kg/h,
14 kg/h,
Lorch pressure regulator, pressure gauge, 12 kg/h,
Katje Welding bv
page 46
0.5-4 bar,
4 bar,
0.5-4 bar,
excess flow valve, SHELL
2015-2016
Piëzo
A034330#
A034331#
A034332#
A034333#
A034334#
A034338#
A034339#
A034340#
A034345#
A034346#
A034350#
A034351#
A034352#
A034355#
A034356#
A034359#
A034362#
A034363#
A034364#
Propane soldering equipment with electronic ignition
Piëzo handle without arresting device control lever
Piëzo handle with arresting device control lever
Piëzo heating torch
L-500 mm
L-750 mm
L-900 mm
Piëzo heating torch incl. handle
L-500 mm
L-750 mm
L-900 mm
Piëzo point brazing torch
5 mm
Piëzo point brazing torch
7 mm
Piëzo turbo brazing torch
15 mm
17 mm
22 mm
Piëzo shrinkage torch
22 mm
Piëzo shrinkage torch
30 mm
Piëzo shrinkage torch, hot air
30 mm
Piëzo soldering torch
Soldering tip "Hammer" 350 gram
Soldering tip "Pointed" 250 gram
D-50 mm
D-60 mm
D-60 mm
D-50 mm
D-60 mm
D-60 mm
Lorch soldering equipment with electronic ignition, sturdily constructed ensuring reliability and safety.
The multi-purpose handle offers the possibility of:
- electronic ignition
- rotating hose connection
- valve for specific flame adjustment
- quick change soldering torches
- torch can be revolved in the shank (360°).
Gas pressure up to 4 bar. Capacity max. 12 kg/h.
Classic
A034509
A034510
A034511
A034512
A034513
A034444
A034514
A034515
A034516
Propane equipment Classic
Soldering torch incl. soldering tip "Hammer” 350 gram WT-1 Classic
Isolating wooden handle Classic
Soldering torch KT-S Classic
Windshield Classic
Torch support Classic
Soldering tip "Hammer" 350 gram WT-I Classic
Point brazing torch PT-S 5 Classic
Point brazing torch PT-S 7 Classic
Paint stripping torch AT-S Classic
Professional, isolating wooden handle. Free rotating valve/hose nipple G 3/8”L gives
no hose drag. Sliding air control for setting from hard to soft flames.
Regulators
A034465
A034466
Pressure regulators
Propaline pressure regulator, pressure gauge,
Propaline pressure regulator, pressure gauge,
8.0 kg/h, 0.5-4 bar,
8.0 kg/h, 0.5-4 bar,
SHELL
POL
A034469
4.0 kg/h, 2.0 bar, excess flow valve,
SHELL
A034472
A034467
Pressure regulator, refillable LP gas cylinder,
Pressure regulator, refillable LP gas cylinder,
3.0 kg/h, 1.5
4.0 kg/h, 1.5
A034480
A034481
A034482
A034483
A035580
A035582
A034478
A034485
A034487
A034488
Catweld pressure regulator,
GG pressure regulator,
GG pressure regulator,
Pressure regulator,
Pressure regulator,
Katje Welding bv
1.5 kg/h,
1.5 kg/h,
1.5 kg/h,
1.5 kg/h,
1.5 kg/h,
1.5 kg/h,
bar
bar
30
mbar,1/4”L,
30
mbar,hose nipple,
50
mbar,1/4”L,
50
mbar,hose nipple,
30
mbar,1/4”L, pressure relief valve,
50
mbar,1/4”L, pressure relief valve,
50
mbar, hose nipple,
4.0 kg/h, 20-90 mbar,1/4” in 3/8” out
6.0 kg/h, 0-4 bar, 3/8”L in 3/8”L out
6.0 kg/h, 0-4 bar,
page 47
SHELL
SHELL
SHELL
SHELL
SHELL
SHELL
POL
SHELL
2015-2016
Propane equipment accessories
A034550#
A034551#
A034496#
A034497#
A034504
A034505
A034499
A034500
A034501#
A034502#
A034503
A034495
A035410#
Refillable LP gas cylinder 450 gram safety valve and suspension hook
Refillable gas cylinder 450 gram safety valve and suspension hook
Refill connection right angle,
SHELL
Refill connection straight,
SHELL
Refill connection straight, handwheel,
SHELL
Refill connection straight, connection nut, SHELL
Hose nipple,
SHELL
Hose nipple,
POL
Excess flow valve,
SHELL
Excess flow valve,
POL
Swivelling angled connection 3/8”L
Propaline torch support
Set cleaning needles 0.1-0.9 mm
A034548#
Hard soldering set LOMAX-2
Lomax hard/soft soldering set, including:
- handle LX-14, hard soldering blowpipe nr. 3 (2-4 mm)
- 3 meter Oxygen // Propane hose, regulator Oxygen
- regulator Propane, 0.3 bar fixed outlet pressure
- manometer cover, refillable LP gas cylinder 425 gram
- refillable Oxygen cylinder 2 ltr, carrying frame.
A034473
A034475
A034476
A034477
Excess flow valve type 651
Lorch 651
1.5 - 2.2
Lorch 651
4.0 - 6.0
Lorch 651
6.0 - 8.5
Lorch 651
10.0 - 14.0
kg/h
kg/h
kg/h
kg/h
Anti leakage device prevents unintentional and unnoticed escape of (liquid) fuel gas.
A034315
Lorch/Propaline compact heating torch (cup) 40 mm
A035474
Lorch/Propaline set complete
Including:
- Propaline handle Vari
- Propaline stainless steel extension tube 600 mm
- Propaline stainless steel heating head HT-60
- Propane dose 8 x 15 mm (5 mtr. per set)
- Pressure regulator incl. flow excess valve
- Propaline torch support
- full colour packaging.
Katje Welding bv
page 48
2015-2016
Gas welding accessories
A072016
A072017#
A072040#
A072041#
A072042#
A072043#
A072044
A072045
A072046
Welding goggles Stroof 5A DIN
Cutting goggles Ultra-Safe 5A DIN
Welding goggles flip-up AGA GS-31
Welding goggles flip-up Amigo
Anti spatter lenses 10 pcs. (splinter free glasses)
Anti spatter lenses Vinylite 10 pcs. (AGA GS-31)
Welding lenses 10 pcs. shade 4 Ø 50 mm
Welding goggles GS-31
Welding goggles Stroof
A072160
A072161
A072162
A072165
A072166
A072168
A072167
A072163
Manometer cover red 63 mm
Manometer cover black 63 mm
Manometer cover blue 63 mm
Manometer cover red 50 mm
Manometer cover blue 50 mm
Manometer cover grey 50 mm
Manometer cover DIN-Plus 2 x 63 mm
Manometer cover Unicontrol
A072250
A072251
A072252
A072253
Spark lighter “round cup”
Spark lighter “pistol”
Flints 10 pcs. “round cup”
Flints 10 pcs. “pistol”
A072257
A072260
A072261
A072262
A072263
A072430
A072431
A072432
A072433
A072434
A072435
A072436
A072437
A072438
A072440
A072264#
Cylinder spindle key Combi “AGA”, “AP”, “Linde”
Cleaning needles universal
Cleaning needles “smooth”
Cleaning needles AGA
Cleaning needles AGA elongated
Cleaning needles AGA 10 pcs.
0.5 mm
0.6 mm
0.7 mm
0.8 mm
0.9 mm
1.0 mm
1.2 mm
1.3 mm
1.5 mm
1.9 mm
®
Cleaning needles HS conical TRITEX
A075510
A075511
A075513
A075515
A075516
A075517
A075518
A075519
A075520
A075521 set
A075525
A075526
A075527
A075550
A075573 set
A075575
A075576
A075590
A075591
A075592
A075593
A075586#
A075588#
A075589#
CW flashback arrestor AC/PR
CW flashback arrestor OX
AGA flashback arrestor FR-20 AC/PR
AGA flashback arrestor FR-20 OX
B” UNF
B” UNF
AGA flashback arrestor FR-20
B” UNF
CW flashback arrestor AC/PR
CW flashback arrestor AC/PR DG-91
AGA flashback arrestor FR-50 SAFE-GUARD-4
AGA flashback arrestor FR-34 AC/PRO B” UNF
B” UNF
AGA flashback arrestor FR-63
WITT flashback arrestor 85-10 AC/PRO
WITT flashback arrestor 85-10 OX
FA
NV
TS
R
=
=
=
=
Spark lighter “round cup”
3/8”L
3/8”
1/4”
3/8”L
3/8”
1/4”L
1/4”
9/16”L
9/16”
9/16”
3/8”
1/4”
3/8”L
3/8”L
3/8”L
3/8”L
3/8”
3/8”L
3/8”
9/16”L
9/16”
1½”
3/8”L
1/2”
regulator
FANVTS
regulator
FANVTS
regulator
FANVTS
handle
FANVT
handle
FANVT
handle
FANVT
handle
FANVT
handle
FANVT
handle
FANVT
handle
FANVT
machine cutting torch FANVT
regulator
FANVTS
regulator
FANVTSR
regulator
FANVTSR
regulator
FANVTSR
regulator
FANVTS
regulator
FANVTS
regulator
FANVTS
regulator
FANVTS
gas supply system FANVTS
regulator
FANVTS
regulator
FANVTS
FR-50
Sintered flame arresting element
Non return valve
Temperature sensitive cut-off valve
Reset by lifting and releasing the bonnet
FR-34
Katje Welding bv
page 49
2015-2016
Gas welding accessories
Non return valves
Non return valves are installed on several (machine) cutting torches. They effectively prevent a reverse flow of gas.
Flashback arrestors
Flashback arrestors effectively prevent a flashback from entering the cylinder or gas supply system. Flashback arrestors are available
in the form of torch-mounted and regulator-mounted arrestors. They stop the flame with the help of a flame arrestor.
A051040
A051041
A051042
A051043
Non return valve BV-11
1/4”
3/8”L
3/8”
1/4”L
A051101
A051102
A051103
A051104
A051105
A051110
A051111
A051112
A051113
A051116
A051117
A051118
A051119
A051120
A051121
Non return valve BV-12 complete
1/4”
1/4”
3/8”
3/8”
3/8”
1/4”
1/4”L
1/4”
1/4”L
3/8”
3/8”L
3/8”
3/8”L
3/8”
3/8”L
x 5.0 mm
x 6.3 mm
x 5.0 mm
x 6.3 mm
x 9.0 mm
x 5.0 mm
x 5.0 mm
x 6.3 mm
x 6.3 mm
x 5.0 mm
x 5.0 mm
x 6.3 mm
x 6.3 mm
x 9.0 mm
x 9.0 mm
A075650#
A075660#
A075661
A075662
A075663
AGA twin outlet valve OX/AC
Twin outlet valve Oxygen
Twin outlet valve Acetylene
Twin outlet valve Acetylene
3/8”
3/8”L
1/4”
3/8”
3/8”L
90°
90°
70°
70°
70°
A074200#
A074201#
A074202#
Gas saver
AGA gas saver GS-10
KW gas saver
KW gas saver
AC/OX
AC/OX
PR/OX
A074212#
A074214#
A074216#
A074218#
A074220#
A074222#
Spare parts GS-10
Beam assembly
Valve insert assembly Acetylene/Oxygen
Gas control valve
Cover Acetylene/Oxygen
Pilot burner
Pin
A076000#
A076001#
A076002#
A077001
Welding mirror, metal arm
Welding mirror, flexible arm on magnetic holder
Metal welding mirror 1.5 mm
Leak detection spray (12 pcs.)
Katje Welding bv
excl. connection nut
page 50
2015-2016
Gas welding wire
The original AGA H-44 Mo
AGA H-44 Mo is a blank drawn, molybdenum alloyed quality wire. AGA H-44 Mo does not spatter and gives an absolute porous free weld
deposit. With AGA H-44 Mo it is easy to control the weld puddle. The wire is mainly used for quality work in St. 37, but is also suitable for steel
qualities with a tensile strength of 440-540 N/mm2. Furthermore, AGA H-44 Mo is excellent for welding parts of boilers and pipelines that are
used at high temperatures up to 450°C.
Principal analysis
C
0.080 - 0.15
Mn 0.90 - 1.10
Si 0.10 - 0.25
P
<= 0.20
S
<= 0.020
Cr
Ni
Mo
Cu
V
<= 0.15
<= 0.15
0.45 - 0.60
<= 0.30
<= 0.030
Mechanical properties of all weld metal (as welded)
Test temp.
20°C
Re N/mm2
>= 295 N/mm2
Rm N/mm2
> 440 / 540 N/mm2
A (Lo=5 do)%
>= 22%
KV J (ISO-V)
0°C / >= 27 J
A060002
A060004
A060006
A060008
A060010
A060012
AGA H-44 Mo blank drawn welding wire for steel L= 700 mm
AGA H-44 Mo blank drawn welding wire 1.6 mm
Delivered in 5 kg. packages. Minimum quantity 20 kg. per diameter.
A060020
A060021
A060022
A060023
A060024
A060025
A060026
A060027
KW copper coated welding wire GI II L= 1000 mm
KW copper coated welding wire GI II
1.0 mm
1.6 mm
2.0 mm
2.5 mm
3.0 mm
4.0 mm
5.0 mm
6.0 mm
Delivered in 5 kg. packages. Minimum quantity 15 kg. per diameter.
Optional gas welding wire available upon request.
A062000#
A062001#
A062002#
A062003#
A062004#
A062005#
A062006#
A062008#
A062009#
A062011#
A062012#
A062013#
A062014#
CATWELD bronze brazing rod universal L= 1000 mm (upon request)
CW bronze brazing rod universal
1.5 mm
2.0 mm
2.4 mm
3.0 mm
4.0 mm
5.0 mm
6.0 mm
Delivered in 5 kg. packages.
CATWELD flux coated brazing rod (upon request)
CW flux coated brazing rod
1.6 x 457 mm
2.0 x 500 mm
2.5 x 500 mm
3.0 x 1000 mm
4.8 x 914 mm
4.0 x 500 mm
A062015#
A062016#
CATWELD flux cored brazing rod L= 500 mm (upon request)
CW flux cored brazing rod
2.5 mm 
CW flux cored brazing rod
3.5 mm 
A062020#
A062021#
A062022#
A062023#
A062035#
A062036#
A062037#
A062038#
CATWELD nickel bronze brazing rod (upon request)
CW 10% nickel bronze brazing rod
CW S3 7% nickel bronze brazing rod
A062027#
A062029#
1.6 x
2.0 x
2.4 x
3.0 x
1.6 x
2.0 x
2.5 x
3.0 x
914 mm
1000 mm
914 mm
1000 mm
1000 mm
1000 mm
1000 mm
1000 mm
CATWELD flux coated nickel bronze brazing rod (upon request)
CW flux coated 10% nickel bronze brazing rod
2.0 x 500 mm
CW flux coated 10% nickel bronze brazing rod
3.0 x 1000 mm
Katje Welding bv
page 51
2015-2016
Brazing and soldering alloys
A064042#
A064044#
A064039#
Silver brazing rod type 610
Silver brazing rod AGA-610
1.5 mm
2.0 mm
3.0 mm
Ag - 40 Cd
Ag - 40 Cd
Ag - 40 Cd
A064047#
A064048#
A064049#
Silver brazing rod type 610 flux coated
Silver brazing rod AGA 610 flux coated
1.5 mm
2.0 mm
3.0 mm
Ag - 40 Cd
Ag - 40 Cd
Ag - 40 Cd
A064052#
A064053#
A064054#
Cadmium free silver brazing rod type 650
Cadmium free silver brazing rod AGA 650
1.5 mm
2.0 mm
3.0 mm
Ag - 55 Sn
Ag - 55 Sn
Ag - 55 Sn
A064056#
A064057#
A064059#
Cadmium free silver brazing rod type 650 flux coated
Cadmium free silver brazing rod AGA 650 flux coated 2.0 mm
Ag - 55 Sn
Ag - 55 Sn
Ag - 55 Sn
A064045#
A064043#
A064946#
Silver brazing rod type 680 flux coated
Ag - 30 Cd
Ag - 30 Cd
Ag - 30 Cd
1.5 mm
2.0 mm
3.0 mm
Silver-Copper-Phosphorus based brazing rods mainly used for brazing copper and copper alloys. The rod is self fluxing, no need for
separate flux, when joining copper to copper.
A293400#
A293402#
A293405#
A293406#
A293407#
A293408#
A293409#
A293412#
A294315#
Silver-Copper-Phosphorus based brazing rod, delivered in 1 kg. packages
Silver-Copper-Phosphorus based brazing rod 2.0 x 500 mm
Ag - 15 P
Ag - 15 P
Ag - 5 P
Ag - 5 P
Ag - 5 P
Ag - 2 P
Ag - 2 P
Copper-Phosphorus alloy 93/7
2.0 x 500 mm
Cu - P 7
Copper-Phosphorus alloy 93/7
2.0 mm spool (±10 kg)
Cu - P 7
Type
AGA-610
AGA-650
AGA-680
Ag
40
55
30
Cu
19
21
28
Ag - 15 P
Ag - 5 P
Ag - 2 P
15
5
2
rest
rest
rest
Zn
21
22
21
P
Cd
20
Silver (brazing) rods
Sn
2
21
5
6.0
6.5
WT °C
610
650
680
Sol.
595
620
600
Liq.
630
660
690
DIN
L-Ag 40 Cd
L-Ag 55 Sn
L-Ag 30 Cd
710
710
710
800
810
810
800
810
810
L-Ag 15 P
L-Ag 5 P
L-Ag 2 P
What is soldering? Soldering is a process in which two or more metal items are joined together by melting and flowing a filler metal into
the joint, the filler metal having a relatively low melting point. Soft soldering is characterized by the melting point of the filler metal, which
is below 450°C. The filler metal used in the process is called solder.
Katje Welding bv
page 52
2015-2016
Stay Brite silver-bearing solder
Versatile Stay Brite silver-bearing solders are used throughout industry as a better-than-brazing method in many instances. The important
advantage of Stay Brite solders is the greater strength of the overall component after joining. Their lower working temperature eliminates the
weakening of the base metals caused by annealment from high brazing heat. As shown in the un-retouched photo below, the Stay Brite section
retains original pipe strength; the brazed section is greatly weakened.
Stay Brite silver-bearing solders have the same excellent affinity as Silver-Copper-Phosphorus based brazing rods and normal silver brazing rods
to bond with all of the ferrous and nonferrous alloys (stainless steel, nickel, copper, brass etc.). Stay Brite joints exhibit considerably higher-thannecessary elongation for sound dissimilar metal joints and vibration applications. Stay Brite alloys range in temperature from 220°C to 280°C.
1.
2.
3.
4.
Lower material costs up to 66%
Lower joining temperature up to 66%
Increases productivity up to 400%
Eliminates base metal distortion
Properties
Composition
Melting point
Completely fluid
Tube strength (before heating)
Tube strength (after joining)
Joint strength
Oxide scale
Annealment
Electrical conductivity
Deposit colour
5.
6.
7.
8.
Brazed joint
------± 20 N/mm2
± 5 N/mm2
± 207 N/mm2
heavy
heavy
-----
Eliminates base metal annealment
Faster post cleaning, little metal discoloration
Eliminates of oxide scale formed by heat
Cadmium free and non toxic
Stay Brite
tin and silver
220°C
220°C
± 20 N/mm2
± 20 N/mm2
± 97 N/mm2
none
none
16.4
bright silver, non-oxidizing
Stay Brite 8
tin and silver
220°C
280°C
± 20 N/mm2
± 20 N/mm2
± 103 N/mm2
none
none
17.1
bright silver, non-oxidizing
Stay Brite has been used for over 30 years to join refrigeration/air conditioning tubing. This alloy has been used to fabricate millions of strong,
leak proof joints. The graph shows the strength of 5/8” tube sections at room and elevated temperature. Stay Brite connections are excellent for
many HVAC applications.
Stay Brite 8 has a higher silver content than regular Stay Brite, effecting a plastic range of 60°C. Just above the melting point of 220°C this alloy
becomes somewhat fluid, but has a high surface tension useful in filling loosely fitted couplings.
Flux
Material
Packaging
use Stay Clean soldering flux for all metals other than aluminum.
1/16” (1.6 mm) and 1/8” (3.2 mm) wire diameters.
1 lb spools.
Stay Brite (soldered)
No distortion at
Stay Brite fitting.
Brazed (15% Silver-Copper-Phosphorus based brazing rod)
No distortion of
copper pipe adjacent
to Stay Brite fitting.
Gross distortion
and bursting of pipe
adjacent to braze.
Brazing temperatures caused
distortion at brazed fitting
when pressurized.
Strength test: Stay Brite silver-bearing solder vs. 15% Silver-Copper-Phosphorus based brazing rod. Stay Brite soldered on one end, brazed
on the other. Pressurized hydraulically until ruptured. Stay Brite silver-bearing alloys have a lower working temperature, eliminating the
weakening of base metals caused by annealing from high brazing temperatures. The Stay Brite section retains original pipe strength; the brazed
section is greatly weakened.
Katje Welding bv
page 53
2015-2016
Soft soldering alloys
A064050#
A064058#
A064060#
AGA silver-bearing solder (meets the requirements of the safe drinking water act for use on copper potable water lines)
AGA silver-tin 2.0 mm spool 500 gram
Sn Ag - 5
Stay Brite 8 1/16”
spool 1 lb
Sn Ag - 8
Stay Brite 8 1/8”
spool 1 lb
Sn Ag - 8
A064065#
A064066#
A064070#
A064071#
Tin-lead solder
Tin-lead solder 2.0 mm spool 500 gram
Tin-lead solder 2.0 mm spool 500 gram
Tin-lead bar
400 x 10 x 2 mm
Tin-lead bar
400 x 10 x 2 mm
60 Sn - 40 Pb
50 Sn - 50 Pb
50 Sn - 50 Pb
60 Sn - 40 Pb
A064061#
A064062#
Other soft soldering alloys
Speedy solder
2.0 mm spool 250 gram
Bridgit solder
3.2 mm spool 1 lb
Sn Cu - 3
CuNiSbSn
Soft soldering alloys
Type
Sn Ag – 5
Stay Brite 8
Speedy
Bridgit
Katje Welding bv
Ag
3.5
6
0.1
Cu
3
3
Zn
P
Cd
Sn
Rest
Rest
Rest
Rest
page 54
Ni
Sb
0.2
5
WT °C
220
220
230
230
Sol.
225
220
230
238
Liq.
240
280
250
332
DIN
L-Sn Ag - 5
L-Sn Ag - 8
L-Sn Cu - 3
-
2015-2016
Fluxes
A064503
A064504
A064510#
A064512
A064514
Flux for (silver) brazing alloys
Stay Silv white paste flux
Stay Silv white paste flux
KW flux paste 750-1100°C
Stay Silv powder flux
Stay Silv black flux paste
A064522
A064523
A064524
A064555#
A064570
Other fluxes for brazing alloys
WELCO 600 Bronze powder flux
KW aluminum flux
KW cast iron welding flux
AGA Cobraflux Protechno
Brush size 3 dimension 13x140
A064500
A064501
A064502
A064506
A064507
A064508
Soldering fluxes
Stay clean liquid flux 4 oz aluminium
Stay clean paste flux 4 oz
Stay clean liquid flux 4 oz
Bridgit
paste flux 1 oz
Stay clean paste flux 1 lb
Stay clean liquid flux 1 gallon
Katje Welding bv
6.5 oz (brushcap)
1 lb
500 gram
250 gram
1 lb
1 lb
500 gram
500 gram
5 ltr
spoutcap
brushcap
spoutcap
brushcap
(powder)
(powder)
(powder)
(liquid)
(liquid)
(paste)
(liquid)
(paste)
(paste)
(liquid)
page 55
2015-2016
TIG welding wire
A060130
A060131
A060138
A060139
Copper coated wire for TIG welding SG-1 L= 1000 mm
Copper coated wire for TIG welding SG-1
1.6 mm
2.0 mm
2.4 mm
3.2 mm
A060126
A060127
A060128
A060129
Blank drawn wire for TIG welding SG-3 L= 700 mm
Blank drawn wire for TIG welding SG-3
1.6 mm
2.0 mm
2.4 mm
3.2 mm
A060140#
A060141#
A060144#
A060148#
Stainless Steel wire for TIG welding L = 1000 mm
Stainless Steel wire for TIG welding 316 LSi
Stainless Steel wire for TIG welding 308 (304) LSi
Stainless Steel wire for TIG welding 316 LSi
Stainless Steel wire for TIG welding 308 (304) LSi
1.6 mm
1.6 mm
2.0 mm
2.0 mm
Blank drawn wire for TIG welding unalloyed structural steels. Typical applications such as work shops and general constructions.
A129220#
TIG pen
TIG pen uses any wire from 0.8 to 3.2 mm
The TIG pen allows the welder to control the tip of the filler wire with great accuracy even at a long distance from the weld seam and helps the
welder to obtain a higher welding quality. It also eliminates waste of the filler wire.
Katje Welding bv
page 56
2015-2016
Gas welding applications
A039500#
A039501#
A039600#
Thermic lances
Lance holder
Rubber collet seal
Thermic lance
3/8”
3/8”
3/8”
A thermic lance is a steel pipe packed with mixed metal wires. Pure oxygen is passed through the pipe from an oxygen cylinder and regulator.
The end of the pipe is lit with a high temperature source, e.g. an oxy-acetylene torch. The iron in the steel burns into the oxygen coming down
the pipe to produce enormous heat and a liquid slag of iron oxides and other materials, which dribbles and splashes out.
A250100#
A250120#
A250122#
A250124#
A250126#
A250128#
A250140#
Flame cleaning equipment
Handle NEF
Flame cleaning attachment
Special cleaning needles
50 mm
100 mm
150 mm
200 mm
250 mm
The principle of flame cleaning is based on using the hottest flame possible - acetylene and oxygen - for rapid heating of a limited portion. Since
the surrounding materials remains cold, the heated parts such as rust, paint and oil will be removed easily from concrete, metal and bricks.
A250300#
A250302#
A250303#
A250306#
A250307#
Flamtech heating torch Acetylene
Flamtech heating torch
Flamtech heating torch water cooled
Flamtech heating nozzle MA-3
5.400- 8.500 ltr
Flamtech heating nozzle FA-6
6.400-10.000 ltr
Flamtech heating nozzle FY-6 (Tetrene, Mapp, Apachi)
A030000#
A030001#
A030002#
A030003#
A030004#
A030006#
A030007#
A030010#
A030011#
A030012#
A030013#
A030015#
A030016#
A030017#
A030018#
A039001#
Powder cutting equipment
Powder dispenser, filling max. 70 kg.
Powder cutting attachment
Inner nozzle
Tube holder
Outer nozzle
Valve
Powder tube
Powder cutting nozzle HA (AC)
0 - 50 mm
Powder cutting nozzle HA (AC) 50 - 100 mm
Powder cutting nozzle HP (PR)
0 - 50 mm
Powder cutting nozzle HP (PR) 50 - 100 mm
Cutting powder AGA 200 per kg. (25 kg. plastic bag)
Powder dispenser
X-21 Powder cutting torch
Powder cutting attachment
Powder cutting is a method for quick and economic gas cutting for cast iron, stainless steel etc. with the same precision as for normal carbon
steel. This will be achieved through the use of a finely ground metal powder that is blown through the cutting torch into the cutting flame. The
cutting nozzle on this torch differs from the normal nozzles only in respect that it is equipped with extra outlet canals for the metal powder.
The finely ground metal powder, consisting mainly of iron, is heated to ignition temperature when passing through the heating flame and
thereafter burnt into contact with the cutting oxygen, thus setting free a large amount of heat. The iron oxides and leftovers of burnt iron will
mix with the viscous metal oxides. Through this, the slag becomes fluent and is driven out by the cutting oxygen flame.
Katje Welding bv
page 57
2015-2016
Cylinder trolleys
A071000##
A071003#
A071004#
A071010##
A071011#
Cylinder trolleys
Cylinder trolley Catweld
Cylinder trolley AGA Fixiflam
Cylinder trolley Oxywheel (medical)
110/150R
KW 210R
KW 110R
KW 250R
KW 250S
1 x 10 ltr of 1 x 50 ltr
2 x 10 ltr
1 x 10 ltr
2 x 50 ltr
2 x 50 ltr
solid rubber wheels
solid rubber wheels
solid rubber wheels
solid rubber wheels
spoke steel wheels
Handling and storing cylinders can be difficult due to their size and weight. They can be a threat to workers and their workplace if not secured
correctly. Current legislation stipulates that cylinders be properly secured in transit and whilst stationary (cylinder holder with chain). All gas and
oxygen trolleys are equipped with steel plates between the handles and cylinders to prevent fire heating up the hoses and cylinders. It is
preferred that all cylinder trolleys should be equipped with fire extinguishers.
Catweld 110/150R
Katje Welding bv
Fixiflam 210R
page 58
Fixiflam 250R
2015-2016
Machine cutting torches
A051002#
A051194#
A051196#
A051199#
A051197#
A051500#
A051501#
A051505#
A051506#
A051007#
A051590#
A051591#
Machine cutting torch BM-31 CF
Machine cutting torch Jetstream
Machine cutting torch BIR
Twin tip holder Injector
Machinebrander FIT+
Machinebrander FIT+
INJ
INJ
INJ
INJ
INJ
INJ
INJ
INJ
INJ
D= 28
D= 30
D= 32
D= 32
D= 32
D= 32
D= 32
D= 32
D= 32
L= 160
L= 250
L= 220
L= 400
L= 220
L= 220
L= 220
L= 320
L= 320
AC
AC
AC
AC
PR
AC
PR
AC
PR
INJ
INJ
D= 32
D= 32
L= 220
L= 220
AC
PR
Twin tip holder Injector
Jetstream
BM-31 CF
FIT Plus
JETSTREAM, BM 31 CF and Fit Plus torches are especially adapted for cutting with high speed nozzles. Fit Plus nozzles are removed without
any tools, eliminating the possibility of damaging the torch.The patented method for the cooling of the nozzles gives a considerably increased
service life to the nozzle. The built in cooling flow valve provides that during preheating a small amount of oxygen flows through the cutting
channel that prevents penetration of warm gases in the cutting nozzle and cutting channel.
A built in special spiral injector (also patented) contributes to the extremely high safety and better mixture of flammable gases and oxygen. In
the connection of the injector, an aluminum housing is placed to complete the cooling.
JETSTREAM is adapted for acetylene and propane alternatively and available in different sizes.
BM 31 CF for acetylene is specially designed to be used in cutting machines with continued spaces. It is a solid brass construction.
However, the FIT Plus cutting nozzles are fixed in the torch head by bayonet-lock without using wrenches, which drastically reduces set-up time.
Fuel gas
The cutting nozzle is being cooled while the material is heating
up. This means:
Preheating Oxygen
Cutting Oxygen
Cooling flow valve
longer service life
longer intervals between nozzle changes
less interruption
better measurements
less scrap

Gasmixture
IMPROVED CUTTING ECONOMY
Aluminum housing
Gasmixture
Cutting Oxygen
Other machine cutting torches available upon request.
A051090
A051091
A051092
A051093
Pressure control gauge
Test gauge
0 -10
Test gauge
0 -10
Test gauge
0 - 2.5
Test gauge
0 -16
Katje Welding bv
bar
bar
bar
bar
1/4”
3/8”
3/8”L
3/8”
page 59
2015-2016
Safety
-
Working gloves
Welding gloves
Welding jackets
Welding aprons
Welding caps
Welding cap KROMER, 100% cotton, available in sizes:
A140956
Welding cap KROMER size 56
A140957
A140958
A140959
A140960
A140961
A140962
Katje Welding bv
page 60
2015-2016
Heat protection, work protection, insulation technique
Heat protection up to 1200°C
KW fabrics offers protection against spatters and sparks up to 1200°C. In the field of heat protection KW fabrics allow a flexible product design
and protection against thermal effects for men, machines and material. The fabrics are available on full rolls or in various standard sizes.
Art.nr.
A140404#
A140405#
A140406#
A140407#
A140408#
Size
1.0 x 50 mtr
1.0 x 50 mtr
1.0 x 50 mtr
0.9 x 50 mtr
1.0 x 50 mtr
Art.nr.
A140415#
A140416#
A140417#
A140418#
A140419#
A140420#
A140421#
A140422#
Size
1000
2000
1000
2000
1000
2000
900
1800
Up to °C
600
850
1150
1300
1000
x
x
x
x
x
x
x
x
Fabrics on full rolls
Description
one side aluminum coating, anti-skid
mechanical applications
mechanical applications
≠ mechanical applications, anti-skid
thermal resistance, aluminum coating
2000 mm
2000 mm
2000 mm
2000 mm
2000 mm
2000 mm
2000 mm
2000 mm
glass fibre, one side Alufix coating
silicate fabric, hard wearing, abrasion resistant
silicate fabric, hard wearing, abrasion resistant
silicate fabric, vermiculite coating, flexible
glass fibre, 1000 gr/m2, Alufix coating
Fabrics standard dimensions
Up to °C Description
600 seamed, one side aluminum coating
600 seamed, one side aluminum coating
850 seamed, both sides high temperature coating
Advantages:
- Non noxious, asbestos free.
- Top heat resistant.
- Hard wearing, mechanical resistance.
Pipeline construction mats
 Slows the cooling of the welded seems
 Protects the welding seam against moisture direct after welding
 Fasteners made with leather buckles and velcro/velour, metal eyes
A140500#
A140501#
A140502#
A140504#
A140505#
A140506#
A140507#
A140508#
A140509#
A140510#
A140511#
A140512#
Insulation mats width 300 mm
200 pipe L = 800 mm
500°C
300 pipe L = 1100 mm
500°C
400 pipe L = 1400 mm
500°C
600 pipe L = 2100 mm
500°C
700 pipe L = 2400 mm
500°C
800 pipe L = 2700 mm
500°C
900 pipe L = 3000 mm
500°C
1000 pipe L = 3300 mm
500°C
1100 pipe L = 3600 mm
500°C
1200 pipe L = 4000 mm
500°C
1300 pipe L = 4300 mm
500°C
1400 pipe L = 4600 mm
500°C
 Heat protection up to 500°C, glass fibre
 Heat protection up to 1200°C, silicate fabric
A140513#
A140514#
A140515#
A140517#
A140518#
A140519#
A140520#
A140521#
A140522#
A140523#
A140524#
A140525#
Insulation mats width 500 mm
200 pipe L = 800 mm
500°C
300 pipe L = 1100 mm
500°C
400 pipe L = 1400 mm
500°C
600 pipe L = 2100 mm
500°C
700 pipe L = 2400 mm
500°C
800 pipe L = 2700 mm
500°C
900 pipe L = 3000 mm
500°C
1000 pipe L = 3300 mm
500°C
1100 pipe L = 3600 mm
500°C
1200 pipe L = 4000 mm
500°C
1300 pipe L = 4300 mm
500°C
1400 pipe L = 4600 mm
500°C
Other measurements available upon request.
Fire extinguish blanket and container
Made of glass fibre fabric with silicone coating on both sides.
A140425#
A140426#
Fire extinguish blanket
2000 x 1600 mm 500°C DIN 14155
Container
300 x 200 x 300 mm
Heat protection clothing up to 1000ºC
Extreme temperatures of over 1000°C radiation heat ask for extreme protection coatings. Preox/aramid fabrics with aluminum high vacuum
coating offers sufficient protection.
A140430#
A140431#
A140432#
A140433#
A140434#
A140435#
A140436#
A140437#
A140438#
Heat protection hood with aluminum frame for glass pane
Heat protection hood with aluminum frame for glass pane
Heat protection hood XL, chest, neck and shoulder protection
Heat protection hood XL, chest, neck and shoulder protection
Gold steamed glass, bent bonded, 100 x 220 mm
Clear glass, bent bonded, 100 x 220 mm
Gold steamed glass, polycarbonate, 100 x 220 mm
Heat protection jacket L= 80 cm, velcro fastener, upright collar, without pockets
Katje Welding bv
page 61
HS KA
HS KA-3
HS KA
HS KA-3
HS KA
HS KA-1
2015-2016
Heat protection clothing up to 1000ºC
A140439#
A140440#
A140441#
A140442#
A140443#
A140444#
A140445#
A140446#
A140447#
A140448#
A140449#
A140550#
A140551#
Heat protection trousers L= 100 cm, belt loops, without pockets
Heat protection coat L= 120 cm, velcro fastener, upright collar, without pockets
Heat protection gaiters L= 36 cm, velcro fastener
Heat protection glove L= 43 cm, thumb side, CE III
Heat protection mask, flip-up glasses, ear, face and head protection
Heat protection mask XL, flip-up glasses, ear, face, throat and head protection
HS KA-3
HS KA
HS KA-1
HS KA-3
HS KA
HS KA-1
HS KA-3
HS KA
HS KA-1
HS KA-3
HS KA-3
HS
HS
Facial protection up to 1000°C with swing frame. Standard for most safety helmets (please indicate helmet type).
A140552#
Facial protection with swing frame
HS KA-3
Universal helmet and neck protection up to 1000°C.
A140553#
A140554#
Helmet and neck protection
Helmet and neck protection
HS KA-3
HS KA-4
Arm protection, covers the full arm, including elastic bands.
A140555#
A140556#
Arm protection (sleeves) L= 420 mm
Arm protection (sleeves) L= 420 mm
HS KA-1
HS KA-3
Aprons, heat protection up to 1000°C, with aluminum high vacuum radiation heat (KA-3) protection.
A140557#
A140558#
Apron, 80 x 100 cm, 1000°C
Apron, 80 x 100 cm, 1000°C
HS KA-3
HS KA-4
Frontal heat protection, up to 1000°C, velcro fastener.
A140559#
A140560#
A140561#
A140562#
Front protection coat, back open
L= 80 cm
L= 80 cm
L= 130 cm
L= 130 cm
HS KA
HS KA-3
HS KA
HS KA-3
HS
KA
KA-1
KA-3
KA-4
= heat (protection) shield.
= preox fabric, approx. 580 gr/m 2, aluminum coating, heavy quality, very good working comfort.
= preox/aramide fabrics, approx. 260 gr/m 2, aluminum coating, light quality, good working comfort.
= aramide fabric, approx. 500 gr/m2, aluminum coating, heavy quality, good working comfort.
= glass fibre fabric, approx. 660 gr/m 2, aluminum coating.
Heat protection gloves
Kevlar knit glove, 5-finger, contact heat up to 200°C, CE II, EN 388, EN 407, EN 420, cut resistant, insulating.
Use: glass industry, metal industry, auto motive, food industry.
A140450#
A140451#
A140452#
Kevlar knit glove, 5-finger, without lining
Kevlar knit glove, 5-finger, without lining
Kevlar knit glove, 5-finger, with lining
200°C
200°C
200°C
25 cm
25 cm metal-enforced
25 cm
Aramid fabric glove, contact heat up to 500°C, special insulation, CE III, EN 388, EN 407, EN 420, cut resistant, mechanical applications.
Use: metal industry, foundries, glass industry.
A140453#
A140454#
A140455#
A140456#
A140457#
A140458#
Aramid fabric glove, insulated
Aramid fabric glove, insulated
Aramid fabric glove, 3-finger, insulated
500°C
500°C
500°C
500°C
500°C
500°C
30 cm
43 cm
30 cm
43 cm
30 cm
43 cm
Preox/aramid fabric glove, contact heat up to 650°C, special insulation, CE III, EN 388, EN 407, EN 420, mechanical applications,
Good working comfort. Use: metal industry, foundries, glass industry.
A140459#
A140460#
A140461#
A140462#
A140463#
A140464#
Preox/aramid fabric glove, insulated
Preox/aramid fabric glove, insulated
Preox/aramid fabric glove, 3-finger, insulated
650°C
650°C
650°C
650°C
650°C
650°C
30 cm
43 cm
30 cm
43 cm
30 cm
43 cm
Glass fibre fabric glove, contact heat up to 900°C, special insulation and High Temperature coating, CE III, EN 388, EN 407, EN 420,
mechanical applications, abrasion resistant.
Use: metal industry, foundries, glass industry.
A140465#
A140466#
A140467#
Glass fibre fabric glove, TM-HT,insulated
Glass fibre fabric glove, TM-HT,insulated
Glass fibre fabric glove, TS-HT, insulated
Katje Welding bv
900°C
900°C
900°C
page 62
32 cm
43 cm
32 cm
2015-2016
Heat resistant gloves
High Temperature fabric glove, contact heat up to 1100°C, special insulation, CE III, EN 388, EN 407, EN 420, soft and flexible, will
not stick to glass.
Use: glass industry, high temperature ovens, laboratory, metal industry.
A140469#
A140470#
A140471#
A140472#
High Temperature fabric glove, TS-HT,insulated
High Temperature fabric glove, TS-HT,insulated
High Temperature fabric glove, TM-HT,insulated
High Temperature fabric glove, TM-HT,insulated
TS
TM
HT
= thumb side.
= thumb middle.
= high temperature.
1100°C
1100°C
1100°C
1100°C
32 cm
43 cm
32 cm
43 cm
Thermal blockers “N” and “J” (insulation paste) up to 3000ºC
Thermal blockers “N” and “J” are needed as a protection against damaging caused by the influence of heat during welding and soldering. Used
to prevent heat up to 3000°C.
Thermal blocker “N” can be applied with a spatula and is ideal for long welding seams. The paste is soft and flexible.
Thermal blocker “J” can be applied by hand and will not stick to your fingers or the material to be used. The clay is firm and easy to mould.
Advantages:
- No expensive time consuming disassembling.
- No damage to varnish or deformation of materials.
- The energy being used will be concentrated in the
working area.
- Asbestos free.
Thermal blocker ”N”
 Partial liquefied
 Applied with a spatula
 Large surfaces
A140475
A140476
A140477
Thermal blocker “N”
Thermal blocker ”J”
 Paste
 Applied by hand
 Welding/soldering applications
1 kg
2.5 kg
5 kg
A140480
A140481
A140482
Thermal blocker “J”
1 kg
2.5 kg
5 kg
Flame protection mats (dry/moist)
Flame protection mats prevent the heat flow (contact to the materials to be protected) damaging the material. Multi layer construction and
reusable several times.
Advantages:
- No expensive time consuming disassembling.
- Protects the material from burning; for example from welding sparks/pearls.
- Asbestos free.
Flame protection mats (dry)
 Protection from 700°C up to 1000°C
 Prevent damage to rugs, wall paper, wooden floors
 Special heat protection
Flame protection mats (moist)
 Protection up to 3000°C
 Rewetting afterwards
 Stored in a special plastic bag
Applications:
700°C protection mat
 Usable both sides
 Approx. 5 mm thickness
 Soldering
Katje Welding bv
 Usable one side
 Welding
page 63
 Usable one side
 Welding pearls (± 1000°C)
2015-2016
Flame protection mats (dry/moist)
A140484#
A140485#
A140486#
A140487#
A140488#
A140489#
A140490#
A140498#
A140491#
A140492#
A140493#
A140494#
A140495#
Protection mat, dry, without aluminum
Protection mat, dry, with aluminum
Protection mat, dry
Protection mat, dry
Protection mat, dry
Protection mat, dry
Protection mat, dry
Protection mat, dry
Protection mat, moist
330 x 500 x 5 mm
330 x 500 x 5 mm
300 x 300 x 20 mm
300 x 500 x 20 mm
500 x 500 x 20 mm
1000 x 500 x 20 mm
1000 x 1000 x 20 mm
1000 x 1000 x 20 mm
300 x 300 x 30 mm
300 x 500 x 30 mm
500 x 500 x 30 mm
1000 x 500 x 30 mm
1000 x 1000 x 30 mm
700°C
700°C
1000°C
1000°C
1000°C
1000°C
1000°C
500°C
3000°C
3000°C
3000°C
3000°C
3000°C
Protection mat (slowly cool down hot foundry pieces) 1000 x 1000 x 50 mm
1000°C
Foundry mat
A140499#
Heat protection safety box
Contains everything that is needed as a protection for difficult soldering or welding work to prevent damaging caused by the influence of heat.
All well sorted and handy for easy use. Guarantees clean and quick work.
Case contains:
1 x 1 kg thermal blocker “J”
1 x (30 x 50 cm) protection mat dry
1 x (30 x 30 cm) protection mat moist
1 x (200 x 90 cm) welding blanket
Velcro fastener
A140496#
3000°C
1000°C
3000°C
1300°C
Heat protection safety box
Welding cushions
KW welding cushions offers (knee) protection on high temperature materials. The insulation contains non-burnable materials. The heat resistant
cover material is made of canvas, split leather or aluminum coating.
A140409#
A140410#
A140411#
A140412#
A140413#
A140414#
Welding cushion, aluminum coating
Welding cushion, canvas
Welding cushion, split leather
Welding cushion, split leather
500°C
500°C
200°C
250°C
250°C
500°C
45 x 45 x 6 cm
40 x 40 x 4 cm
40 x 40 x 4 cm
40 x 40 x 4 cm
40 x 40 x 8 cm
100 x 40 x 4 cm
Other dimensions available upon request.
Katje Welding bv
page 64
2015-2016
Tempilstik temperature indicator






Surface temperature detection
Inexpensive alternative for temperature measurement
Simple, no gauges or electronics
Easy to use by virtually anyone, anywhere
85°C temperature measurements available (40°C up to 1200°C)
Reliably accurate, melts within ± 1% of rated temperature
Applications
Determining surface temperatures during:
- welding and metal fabrication
- “pre-heating, interpass”
- “postweld” heat treatment
- “annealing”, “stress relieving”.
Determining operating temperatures:
- bearings, transformers and steam traps
- PC board preheaters, motors
- electronic components, hydraulic systems
- commercial irons, “hot plates”, heat exchangers.
How to use
Stroke the work piece during heating. When the rated temperature has been reached a distinct melt (smear) will become evident. Tempilstik will
make a mark by melting at the point of contact once the surface reaches the specific temperature of the Tempilstik. The holder provides strong
grip on the chalk avoiding slippage.
Standard packaging: 10 per box.
A131200#
A131201#
A131202#
A131203#
A131204#
A131205#
A131206#
A131207#
A131208#
A131209#
A131210#
A131211#
A131212#
A131213#
A131214#
A131215#
A131216#
A131217#
A131218#
A131219#
A131220#
A131221#
A131222#
A131223#
A131224#
A131225#
A131226#
A131227#
A131228#
A131229#
A131230#
A131231#
A131232#
A131233#
A131234#
A131235#
A131236#
A131237#
A131238#
A131239#
A131240#
A131241#
A131242#
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
40°C
45°C
50°C
55°C
60°C
65°C
70°C
75°C
80°C
85°C
90°C
95°C
100°C
105°C
110°C
115°C
120°C
125°C
130°C
135°C
140°C
145°C
150°C
155°C
160°C
165°C
170°C
175°C
180°C
185°C
190°C
195°C
200°C
205°C
210°C
215°C
220°C
225°C
230°C
235°C
240°C
245°C
250°C
104°F
113°F
122°F
131°F
140°F
149°F
158°F
167°F
176°F
185°F
194°F
203°F
212°F
221°F
230°F
239°F
248°F
257°F
266°F
275°F
284°F
293°F
302°F
311°F
320°F
329°F
338°F
347°F
356°F
365°F
374°F
383°F
392°F
401°F
410°F
419°F
428°F
437°F
446°F
455°F
464°F
473°F
482°F
A131243#
A131244#
A131245#
A131246#
A131247#
A131248#
A131249#
A131250#
A131251#
A131252#
A131253#
A131254#
A131255#
A131256#
A131257#
A131258#
A131259#
A131260#
A131261#
A131262#
A131263#
A131264#
A131265#
A131266#
A131267#
A131268#
A131269#
A131270#
A131271#
A131272#
A131273#
A131274#
A131275#
A131276#
A131277#
A131278#
A131279#
A131280#
A131281#
A131282#
A131283#
A131284#
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
Tempilstik
260°C
270°C
280°C
290°C
300°C
310°C
320°C
340°C
350°C
370°C
380°C
390°C
400°C
420°C
460°C
475°C
500°C
520°C
530°C
560°C
600°C
625°C
650°C
680°C
700°C
740°C
760°C
775°C
800°C
825°C
850°C
875°C
900°C
910°C
950°C
1010°C
1075°C
1100°C
1125°C
1150°C
1175°C
1200°C
500°F
518°F
536°F
554°F
572°F
590°F
608°F
644°F
662°F
698°F
716°F
734°F
752°F
788°F
860°F
887°F
932°F
968°F
986°F
1040°F
1112°F
1157°F
1202°F
1256°F
1292°F
1364°F
1400°F
1427°F
1472°F
1517°F
1562°F
1607°F
1652°F
1670°F
1742°F
1850°F
1967°F
2012°F
2057°F
2102°F
2147°F
2192°F
Alternative Tempil products like TEMPILAQ G available upon request.
Katje Welding bv
page 65
2015-2016
CATWELD TIG-electrodes (10 pcs. each) Prices available upon request
A129000
A129001
A129002
A129003
A129004
A129005
A129006
A129007
TIG-electrodes WC-20 Tungsten, 2% Ceriumoxide, colour sign grey
TIG-electrodes WC-20 1.0 x 175 mm
A129025
A129026
A129027
A129028
A129029
A129030
A129031
A129032
TIG-electrodes Tungsten pure, colour sign green
TIG-electrodes WP 1.0 x 175 mm
A129034
A129035
A129036
A129037
A129038
TIG-electrodes WZ-03 Tungsten, 0.3% Zirconiumoxide, colour sign brown
TIG-electrodes WZ-03 1.6 x 175 mm
A129041
A129043
A129045
A129046
A129047
TIG-electrodes WZ-08 Tungsten, 0.8% Zirconiumoxide, colour sign white
A129049
A129050
A129052
A129054
A129055
TIG-electrodes WL-20 Tungsten, 2% Lanthanumoxide, colour sign dark blue
TIG-electrodes WL-20 1.0 x 175 mm
A129059
A129060
A129062
A129064
TIG-electrodes WS-2 Tungsten, 2% “Rare Earths”, colour sign turquoise
TIG-electrodes WS-2 1.0 x 175 mm
A129070
A129071
A129072
A129073
A129074
A129075
TIG-electrodes WL-15 Tungsten, 1.5% Lanthanumoxide, colour sign gold/yellow
A129080
A129081
A129082
A129083
A129084
A129085
A129086
TIG-electrodes WY-20 Tungsten, 2% Yttriumoxide, colour sign blue
TIG-electrodes WY-20 1.0 x 175 mm
Katje Welding bv
page 66
2015-2016
Non destructive material testing DIFFU-THERM
A077100
A077108
A077112
Diffu-therm aerosol cans (25 per box)
Penetrant red
BDR-L
500 ml
Cleaner
BRE-2
500 ml
Developer
BEA
500 ml
A077116
A077121
A077125
Diffu-therm jerrycans (4 per box)
Penetrant red
BDR-L
5 ltr
Cleaner
BRE-2
5 ltr
Developer
BEA
5 ltr
Precleaning of the test surface
through-thickness crack or lack of fusion
welding
Application of penetrant
penetration time 10 to 60 minutes, depending on
wall thickness
penetrant
Application of wet developer
developer layer
defect indication after penetration
When testing is carried out with fluorescent penetrants, the development procedure is not necessary, as the penetrant becomes visible under
UV-light.
Alternative packages available upon request.
Katje Welding bv
page 67
2015-2016
Accessories electrical
A130040
A130042
A130044
A130045
A130049
A130050
A130051#
A130052#
A130053#
A130054#
A130100
A130101
A130227
A130228
A130229
Earth clamp spring type,
400 Amp. with copper shunt, bolt 10 mm
Earth clamp spring type,
600 Amp. with copper shunt, bolt 10 mm
Earth clamp Nevada,
350 Amp.
Earth clamp Nevada,
600 Amp.
Earth clamp screw model, 400 Amp. rubber insulation
Earth clamp screw model, 750 Amp.
Earth clamp Catweld,
400 Amp. magnetic
Earth clamp Catweld,
600 Amp. magnetic
Electrode holder twist and grip KW-400
Electrode holder twist and grip KW-600
Electrode holder Catweld crocodile type 200 Amp.
A131001#
A131002#
A131003#
Welding gauge
Welding gauge adjustable
Cambridge gauge adjustable (stainless steel)
Welding gauge set (12 pieces) 3-12 mm
A130108
A130109
A130110
A130111
A130112
A130113#
Chipping hammer
Chipping hammer “ALL STEEL” 450 gram
Chipping hammer “ALL STEEL” 350 gram
Chipping hammer with spring handle
Chipping hammer with synthetic grip 470 gram
Chipping hammer with synthetic grip 320 gram
Chipping hammer chromium steel (steel handle) 420 gram
A130114
A130115
A130116
A130117
A130118
A130119
A130120
A130121
A130122
A051052
A130123
A130124
A051051
Wire brush
Wire brush 2-rows steel
Wire brush 2-rows stainless steel
Wire brush 3-rows stainless steel
Wire brush 2-rows stainless steel curved
Wire brush 3-rows brass curved
Wire brush 4-rows brass curved
U-butt joint
Wire brush 3-rows stainless steel U-butt joint
Wire brush 3-rows brass compact
A130076#
A130078#
A130080#
A130082#
A130083#
A130084#
A130085#
A130086#
Dinse cable connector
Dinse plug
35/50 SK 50
Dinse socket 35/50 BK 50
Dinse plug
50/70 SK 70
Dinse socket 50/70 BK 70
Dinse plug
70/95 SKK 95
Dinse socket 70/95 BKK 95
Dinse plug
95/120 SKS 120
Dinse socket 95/120 BKS 120
400 Amp.
400 Amp.
400 Amp.
400 Amp.
500 Amp.
500 Amp.
600 Amp.
600 Amp.
A131010
A131013
A131014
A131015
A131016
A131017
A131018
Marking
Soapstone
Greased marking chalk red
Greased marking chalk blue
Greased marking chalk yellow
Greased marking chalk white
Greased marking chalk green
Greased marking chalk black
100 x 10 x 10 (50)
120 x 11 mm (12)
120 x 11 mm (12)
120 x 11 mm (12)
120 x 11 mm (12)
120 x 11 mm (12)
120 x 11 mm (12)
Katje Welding bv
page 68
2015-2016
Accessories electrical
A131100#
A131110#
Electronic flowmeter
Gas Turbine Flow Monitor GTFM (in line)
Gas Turbine Flow Monitor GTFM (portable)
cap. 2-120 l/min
cap. 2-120 l/min*
GTFM precisely measures flow rates of welding gasses.
GTFM can be used for Argon, Helium, CO2 or any mixed inert welding gas.
GTFM is “easy to use” (weight: 650 gram, dimension: 138 x 45 mm).
* This unit includes a hose and rubber cone for testing gas flow at the welding
A040205
Hand (test) flowmeter Argon/mixtures
A130125
A130126
A130127
A130128
A130129
A130130
A130131
MIG torch stand
Original FIX
TIG torch stand
Original FIX
MIG torch stand, magnetic Original FIX
TIG torch stand magnetic Original FIX
Electrode holder stand
Original FIX
Torch stand clamp 50 mm Original FIX
Torch stand magnetic base 350 kg/N
A130234#
A130235#
CO2 special purpose plier
CO2 special purpose plier
torch.
Original FIX 1
Original FIX 2
The indispensable, multipurpose tool for rapid and precise cutting of the welding wire,
time-saving cleaning of the CO2 gas nozzle and loosening and tightening of the gas supply nozzle.
Size 1 for nozzles Ø 12 – 15 mm
Size 2 for nozzles Ø 15 – 18 mm
A130236#
A130237#
Welper YS-20 CO2 plier L= 178 mm
Welper YS-50 CO2 plier L= 210 mm
The original & best patented multi-purpose MIG plier for hammering, wire cutting,
removal of spatter from inside, outside nozzle, etc.
A130490#
A130680
Auto darkening welding helmet Eclipse II Variable DIN 9-12
Auto darkening welding helmet Eclipse III Variable DIN 9-12
Professional welding helmet for standard welding applications. Variable shade, range
from 9-12 with external controls for shade selection and sensitivity and internal adjustments
for delay mode. The helmets features two sensors (Eclipse II), respectively four sensors (Eclipse III).
A130480#
Auto darkening welding helmet Mach III Variable DIN 9-13 ’’Fresh air“
MACH III “Fresh air” is an integrated protection system which combines the high technology of
a LCD filter (digital control) including a ventilation system with rechargeable batteries. The ventilation
system, including the materials used for quickly connecting mask and fan, improves operator
safety and comfort and a simplicity of use rarely seen.
A125401#
A125402#
Catweld inverter Arcontrol 160
Catweld inverter Arcontrol 200
Catweld Arcontrol is reliable, lightweight and gives
arc of the welding machine provides the best welding
to another, and it adapts to varying welding needs. It is
welding applications and for use at home.
Katje Welding bv
high efficiency. The stable and concentrative
line. It can be easily moved from one work site
easy to use and is suitable for both professional
page 69
2015-2016
Electrode ovens
Electrode oven portable HP II
HP II welding rod box is suitable for use on the job. Due to its very small weight and
skilful strap the HP II can easily be taken to the workplace. Temperature approximately 110°C; this way
cooling down of the electrodes will be avoided.
Specifications
Electrode capacity
Voltage
Option
Interior dimensions
Exterior dimensions
Net weight
Gross weight
A131120##
: 2 parcels
: 230V/115V AC/DC 200 Watt
: 80V/40V AC/DC 350 Watt
: 90 x 125 x 460 mm
: 170 x 190 x 500 mm
: 9 kg
: 9.5 kg
Electrode oven portable HP II 110°C fixed 230V
Electrode oven portable HP 4
This electrode oven is similar to HP II, however the inside temperature is adjustable
up to 300°C. The capacity of the removable electrode holder varies between
4-6 parcels.
Specifications
Temperature
Capacity
Voltage
Option
Interior dimensions
Exterior dimensions
Net weight
Gross weight
A131126##
: 50-300°C
: 4-6 parcels
: 230V/115V AC 500 Watt
: 80V/40V AC 500 Watt
: 165 x 165 x 470 mm
: 300 x 250 x 560 mm
: 16 kg
: 16.5 kg
Electrode oven portable HP 4 50-300°C 230V
Electrode oven EDR 40
With its capacity of 20-30 parcels EDR 40 is suitable for small workshops and
electrode cabins. The silicagel cartridges will keep the relative humidity below
40% without temperature increase. The silicagel adsorbs the humidity of the air
in the cabinet. When saturated the silicagel colour changes from blue into pink.
As from that moment the cartridges should be removed from the cabinet. While
heating the cartridges the adsorbed humidity will disappear; the cartridges can
easily be used again.
Specifications
Capacity
Voltage
Interior dimensions
Exterior dimensions
Net weight
Gross weight
A131129##
: 20-30 parcels
: 230V 100 Watt
: 490 x 300 x 350 mm
: 510 x 530 x 440 mm
: 14.5 kg
: 16 kg
Electrode oven EDR 40 230V
Electrode oven LPD 100
It is well-known that welding powder, exposed to certain amount of humidity, may cause
incorrect welds. Professional use of the LPD 100 will help the industry to meet the
highest requirements and improve the quality. Constant temperature up to 300°C is
achieved by means of a thermostat. LPD 100 is waterproof and the cabinet is
equipped with 50 mm mineral wool insulation.
Specifications
Temperature
Capacity
Voltage
Interior dimensions
Exterior dimensions
Net weight
Gross weight
A131132##
: 50-300°C
: 100 kg
: 230V/50Hz
: 420 x 420 x 650 mm
: 650 x 530 x 1130 mm
: 75 kg
: 96 kg
Electrode oven LPD 100 230V
Katje Welding bv
page 70
2015-2016
Electrode ovens
Electrode oven ED 120 TC
This double-walled constructed industrial electrode oven with insulation
guarantees a long life time. The thermostat is adjustable up to 120°C.
Specifications
Temperature
Capacity
Voltage
Interior dimensions
Exterior dimensions
Net weight
Gross weight
A131135##
: 50-120°C
: ± 35 parcels
: 230V/50-60Hz 650 Watt
: 500 x 400 x 625 mm
: 600 x 500 x 880 mm
: 61.5 kg
: 84 kg
Electrode oven ED 120 TC 230V
Electrode oven ED 300 TC
The capacity of this oven is approx. 72 parcels and the electrodes are easy to
access. Heated parcels will ensure the welding rods to remain dry (factory
quality).
Specifications
Temperature
Capacity
Voltage
Interior dimensions
Exterior dimensions
Net weight
Gross weight
A131138##
: 50-300°C
: 54-72 parcels
: 400V/50-60Hz 3300 Watt
: 700 x 450 x 1060 mm
: 820 x 600 x 1300 mm
: 131 kg
: 152 kg
Electrode oven ED 300 TC 400V
Electrode oven ED 400 TTCC
This programmable drying oven ED 400 TTCC is especially designed for baking, drying
and subsequently storing welding rods at a lower (pre-selected) holding temperature.
The oven is equipped with 2 temperature controllers (high and low) and a 0 - 30 Hr timer.
Specificaties
Temperature high
Temperature low
Capacity
Voltage
Interior dimensions
Exterior dimensions
Net weight
Gross weight
A131141##
: 50-400°C
: 50-300°C
: ± 125 kg
: 230V/50Hz 2000 Watt
: 500 x 400 x 525 mm
: 730 x 760 x 920 mm
: 90 kg
: 110 kg
Electrode oven ED 400 TTCC 230V
Electrode oven ED 1500 T
This drying oven features a capacity up to 800 parcels. The oven will be heated
electrically with a temperature that exceeds the external temperature approx. 32ºC.
Specifications
Temperature
Capacity
Voltage
Interior dimensions
Exterior dimensions
Net weight
Gross weight
A131144##
: ± 32°C
: 600-800 parcels
: 230V 1000 Watt
: 600 x 1600 x 1560 mm
: 750 x 1605 x 1660 mm
: 230 kg
: 246 kg
Electrode oven ED 1500 T 230V
Katje Welding bv
page 71
2015-2016
CO2 applications
A080000
A080002#
A080004
A080006#
A080008#
A080010#
A080012#
A080014#
KW Hand Air*
Hand Air blower complete with filled cylinder
Refilling cylinder with 150 gram CO2
Refilling cylinder with 150 gram CO2 (exchange full against empty)
Synthetic forwarding box (capacity 12 cylinders)
Synthetic forwarding box (capacity 30 cylinders)
Nozzle black
L= 60 mm
Inside diameter = 0.4 mm
Nozzle red
L= 60 mm
Inside diameter = 0.3 mm
Nozzle black flexible L= 180 mm
KW Hand Air CO2 cleaning is an emerging technology that is very successful within many industries: printing,
machine tools and ICT. Dirt and dust will be removed easily, even on difficult places, due to the high pressure
CO2 cylinder (approx. 50 bars) and several exchangeable nozzles.
A110824#
A110825#
A110826#
A110828#
A080100
A080102
A080104
A080106
A080108
A080110
A080112
A080114
A080116
A080118
CO2 gasheater
CO2 gasheater Mison
CO2 gasheater Ar/N2/He
CO2 gasheater CO2
Sirocco CO2 gasheater
(incl. thermostat 60°C)
220V 25W
220V 25W
220V 25W
220V 200W
RU 4
RU 3
RU 1
RU 1
max. inlet pressure 200 bar
Fryson set complete*
Fryson set complete (ex. CO2)
Cylinder connecting nut
Gasket
High pressure hose
Synthetic shank
Cooling nozzle length 120 mm (blue)
Blowing nozzle length 120 mm (red)
Nozzle nut
Stainless steel lever
Valve assembly complete
Fryson uses the intensely cold properties of carbon dioxide to freeze material quick and simple. The freezing process is based upon the
expansion of liquid carbon dioxide through an orifice which forms solid CO 2 or dry ice (-78°C).
* As long as supplies last.
Katje Welding bv
page 72
2015-2016
Proportional gasmixer (2 gases)
Capacity 4.8 - 85.7 l/min.
Material casing stainless steel, transparent Lexan door.
Type KW 85-2
Art.nr.
B119314
B119315
B119316
B119317
B119318
B119319
B119320
B119321
B119322
Argon
Argon
Argon
Argon
Nitrogen
Argon
Argon
Argon
Argon
Gases
- CO2
- CO2
- Helium
- Helium
- CO2
- Hydrogen
- Hydrogen
- Oxygen
- Oxygen
Adjustment range
0-100% 100-0%
80-100% 20-0%
0-100% 100-0%
50-100% 50-0%
0-100% 100-0%
50-100% 50-0%
50-100% 50-0%
0-100% 100-0%
85-100% 15-0%
Inlet pressure
3.8-6.9 bar
3.8-6.9 bar
3.8-6.9 bar
3.8-6.9 bar
3.8-6.9 bar
3.8-6.9 bar
3.8-6.9 bar
3.8-6.9 bar
3.8-6.9 bar
Outlet pressure*
3.1 bar
3.1 bar
3.1 bar
3.1 bar
3.1 bar
3.4 bar
1.4 bar
3.1 bar
3.1 bar
Inlet pressure
4.6-6.9 bar
4.6-6.9 bar
4.6-6.9 bar
Outlet pressure*
3.4 bar
3.4 bar
3.4 bar
Capacity 4.8 - 330 l/min.
Type KW 330-2
Art.nr.
B119325
B119326
B119327
Argon
Argon
Nitrogen
Gases
- CO2
- CO2
- CO2
Adjustment range
0-100% 100-0%
80-100% 20-0%
80-100% 20-0%
Proportional gasmixer (3 gases)
Type KW 85-3
Art.nr.
B119330
B119331
B119332
Argon
Helium
Argon
Gases
- Oxygen
- Argon
- Helium
- CO2
- CO2
- Oxygen
85-100%
85-100%
50-100%
Adjustment range
- 0-15%
- 0-15%
- 0-15%
- 0-15%
- 0-50%
- 0-15%
Inlet pressure
7.2-7.9 bar
7.2-7.9 bar
7.2-7.9 bar
Outlet pressure*
3.4 bar
3.4 bar
3.4 bar
* factory set at no flow.
Katje Welding bv
page 73
2015-2016
Proportional gasblender (2 gases)
Automatic shutdown if any of the incoming gases falls below a certain pressure level.
Type KW 85-2
Art.nr.
B119336
B119338
CO2
Nitrogen
Gases
- Oxygen
- CO2
Adjustment range
0-100% 100-0%
0-100% 100-0%
Inlet pressure
7.2-7.9 bar
7.2-7.9 bar
Outlet pressure*
1.5-5.5 bar
1.4-5.5 bar
Inlet pressure
7.2-7.9 bar
7.2-7.9 bar
Outlet pressure*
5.5 bar
5.5 bar
Capacity 4.8 - 330 l/min.
Type KW 330-2
Art.nr.
B119343
B119344
CO2
Nitrogen
Gases
- Oxygen
- CO2
Adjustment range
0-100% 100-0%
0-100% 100-0%
Proportional gasblender (3 gases)
Type KW 85-3
Art.nr.
B119346
Nitrogen
Gases
- Oxygen - CO2
0-100%
Adjustment range
- 100-0%
- 100-0%
Inlet pressure
7.2-7.9 bar
Outlet pressure*
3.4 bar
Optional electronic monitoring system.
* factory set at no flow.
Alternative gases and mixtures available upon request.
Katje Welding bv
page 74
2015-2016
SNOWPACK dry ice pellet maker
SNOWPACK makes individual pellets of dry ice from CO2 siphon cylinders with internal dip pipes. Dry ice has many uses in the laboratory,
research centers, hospitals and SNOWPACK allows you to make your own dry ice pellets as needed. SNOWPACK eliminates waste by letting
you make dry ice when you need it, no more trying to find a block of it only to find it has already sublimed. SNOWPACK is simply screwed on to
the outlet of the CO2 cylinder and operated by opening and closing the valve. When connected to a CO 2 siphon cylinder, a pellet of dry ice can
be made. Wearing protective gloves, the nylon wrapper is peeled back to remove the dry ice pellet.
SNOWPACK is available in two sizes.
SNOWPACK model
Approx. pellet weight
Pellet size
Injection time
Number of pellets from 10 kg CO2
cylinder with internal dip pipe ±
Net weight of SNOWPACK
A119915
A119916
SNOWPACK 30
30 gram
50 mm Ø x 25 mm
1 min.
SNOWPACK 500
500 gram
100 mm Ø x 75 mm
2.5 min.
45
400 gram
3
780 gram
Snowpack 30
Snowpack 500
Katje Welding bv
page 75
2015-2016
JETFREEZER pipe freezing equipment
JETFREEZER enables plumbers to maintain, repair and extend systems without the need for costly draining of pipes, in the process saving
money and time. Jetfreezer uses the intensely cold properties of carbon dioxide to create a temporary plug in a small section of pipe. This
allows the plumber to isolate the part of the pipe that is being worked on. Once the job is completed natural convection melts the ice plug, in turn
restoring supply within minutes when the job is completed.
JETFREEZER equipment consists of a flexible, thermally insulated jacket, high pressure hose and washers. The jacket is wrapped around the
pipe to be frozen and then connected by the high pressure hose to the CO 2 siphon cylinder with internal dip pipe. When the cylinder valve is
opened, the liquid carbon dioxide is discharged through the special jet in the jacket and forms solid CO 2 which is trapped by the insulated jacket
and packs around the pipe. Because dry ice has an extremely low temperature of -78°C, it quickly freezes the water within the pipe to form a
secure ice plug. The range includes five jackets to suit all pipes up to 100 mm. The 80-100 mm sizes require two hoses, a jacket, five washers
and a Tee-piece.
The expansion of the liquid CO2 and the high-speed evaporation of carbon dioxide gas cools the remainder of the liquid down to the freezing
point, where it turns directly into a solid.
JETFREEZER is utilising the intensely cold properties of solid carbon dioxide. Protective gloves should always be worn when handling dry ice to
prevent the possibility of frost bite or cold burns arising when dry ice is in contact with the skin. Be sure to ventilate any area that contains dry
ice, and do not transport it in a closed vehicle. Carbon dioxide is heavier than air, and it can concentrate in low areas or enclosed spaces.
A109022
Washer for high pressure hose and Tee-piece
A109753
Tee-piece F x M x M
A119710
High pressure hose Jetfreezer 2440 mm (+ washer)
A119903
Hose coupling adaptor
A119906
Jetfreezer jacket mini
A119907
Jetfreezer jacket 3/4” pipe
10- 22 mm pipe
A119910
Jetfreezer jacket 1½” pipe
22- 42 mm pipe
A119902
Jetfreezer jacket 3” pipe
42- 80 mm pipe
A119911
Jetfreezer jacket 4” pipe
80-100 mm pipe
Katje Welding bv
8- 22 mm pipe
page 76
2015-2016
Tools for piping
Due to its unique design, WT Clamp ensures that the clamping forces
because the distance between clamping points are exactly the same.
range of the WT Clamp (1 to 14 inches). The adjusting screws have
eliminates the scratching of the objects to be welded, and no corrosion
plate which allows a clamping force to meet the requirements for all pipe
(up to 14 inches) and with wall thicknesses up to 15 mm. WT Clamp can
such as carbon steel, stainless steel, duplex, super-duplex and titanium.
are easily performed with the WT Clamp.
A300000#
A300001#
A300002#
WT Clamp
Clamp WT 125
Clamp WT 26
Clamp WT 612
126-
2.5”
6”
14”
are evenly spread round the pipe to be welded,
This is true for all pipe dimensions within the
stainless steel balls at their ends. This
will occur. The arms are made of aluminum
dimensions within the range of the WT Clamp
be used for the welding of all kinds of materials
The welding of pipe to pipe and pipe to fittings
27 64 mm
60 - 168 mm
168 - 355 mm
Single Chain Clamps and Double Chain Clamps are easy tools for clamping pipe to pipe, pipe to bend, pipe to tee or pipe to flange. The low
weight makes it very easy to operate in the workshop and on site. The chain clamps can adjust and align pipes with wall thicknesses up to
1/2" (12 mm) and a clamping force of 2500 kg.
The chain clamps can be used for several pipe dimensions, simply by removing or taking off the jack-bars. The jack-bars are made of stainless
steel on all chain clamps. Both clamps can be used for stainless steel, as only stainless steel is in contact with the pipe. All chain clamps can be
used for pipe dimensions from 5".
A300005#
A300006#
A300007#
A300008#
A300009#
A300010#
A300011#
A300012#
A300013#
A300014#
Single chain clamp for carbon steel
Chain clamp single
Chain clamp single
Chain clamp single
Chain clamp single
Chain clamp single
Chain clamp single
Chain clamp single
Chain clamp single
Chain clamp single
Chain clamp single
5555555555-
12”
16”
20”
24”
32”
36”
42”
48”
54”
60”
A300019#
A300020#
A300021#
A300022#
A300023#
A300024#
A300025#
A300026#
A300027#
A300028#
Single chain clamp for stainless steel
Chain clamp single stainless steel
5555555555-
12”
16”
20”
24”
32”
36”
42”
48”
54”
60”
A300034#
A300035#
A300036#
A300037#
A300038#
A300039#
A300040#
A300041#
A300042#
A300043#
Double chain clamp for carbon steel
Chain clamp double
Chain clamp double
Chain clamp double
Chain clamp double
Chain clamp double
Chain clamp double
Chain clamp double
Chain clamp double
Chain clamp double
Chain clamp double
5555555555-
12”
16”
20”
24”
32”
36”
42”
48”
54”
60”
A300049#
A300050#
A300051#
A300052#
A300053#
A300054#
A300055#
A300056#
A300057#
A300058#
Double chain clamp for stainless steel
Chain clamp double stainless steel
5Chain clamp double stainless steel
5-
12”
16”
20”
24”
32”
36”
42”
48”
54”
60”
Katje Welding bv
page 77
2015-2016
Tools for piping
The HP Clamp is the only hydraulic chain clamp in the world which can operate on pipe diameters from 6" (168 mm) to 60" (1524 mm).
The HP Clamp is able to align and adjust pipes and fittings with wall thicknesses up to 1" (25 mm). Only the length of the chain and the number
of jack-bars varies according to the pipe diameter - the rest you buy only once. The very low weight makes equipment such as cranes
superfluous. To meet the requirements from pipe manufacturers, nuclear, offshore and petrochemical industries, all parts of the HP Clamp that
makes contact with the pipes, are made of stainless steel to avoid markings and contamination on the pipes.
The jack-bars are adjustable and removable. This makes the HP Clamp usable on smaller pipe dimensions.
The HP Clamp consists of jack-bars (number according to size), mounted on two chains including:
1 hydraulic cylinder
1 ratchet brace 10 mm
1 clamping system
1 ratchet brace 24 mm
1 hose (1.8 meter)
1 aluminum tool box.
1 hydraulic hand pump
All HP Clamps are available with extra chains for all pipe-diameters and extra jack-bars.
Other sizes available upon request.
A300065#
A300066#
A300067#
A300068#
A300069#
A300070#
A300071#
A300072#
A300073#
A300074#
A300075#
Hydraulic pipe clamp external
Hydraulic pipe clamp HP612
66666666666-
12”
16”
20”
24”
32”
36”
42”
48”
52”
56”
60”
external
external
external
external
external
external
external
external
external
external
external
Internal Manual Pipe Clamp (IMC) for welding flanges to pipes. The clamp has a range from 2.25” (56 mm) and up to 37” (940 mm).
IMC is also available for stainless steel pipes.
A300117#
A300118#
A300119#
A300120#
A300121#
Manual pipe clamp IMC internal
Manual pipe clamp IMC
56 Manual pipe clamp IMC
400 -
A300125#
A300126#
A300127#
A300128#
A300129#
Manual pipe clamp IMC internal for stainless steel
56 - 140 mm
internal stainless steel
85 - 220 mm
120 - 315 mm
180 - 520 mm
400 - 940 mm
140
220
315
520
940
mm
mm
mm
mm
mm
internal
internal
internal
internal
internal
Internal Manual Flange Clamp suitable for clamping in the lining flanges to bends. Fast and easy tool.
A300135#
A300136#
A300137#
A300138#
Manual flange clamp IMF internal
Manual flange clamp IMF
56 Manual flange clamp IMF
180 -
115
195
315
520
mm
mm
mm
mm
internal
internal
internal
internal
The Double Manual Clamp for orbital welding or normal welding is able to clamp pipes of different dimensions. DMC is also available for carbon
and stainless steel pipes.
A300145#
A300146#
A300147#
Double manual clamp DMC
A300151#
A300152#
A300153#
Double manual clamp DMC for stainless steel
10 70 mm
40 - 140 mm
75 - 330 mm
10 70 mm
40 - 140 mm
75 - 330 mm
stainless steel
stainless steel
stainless steel
Finding the exact top of a pipe has always been a problem. WT Centering Head solves this problem in an easy manner.
It can also be used to find any given points at angles from the top of the pipe. Can be used on all pipes
from 12 mm (1/2").
A300310#
WT centring head
WT centring head
Katje Welding bv
page 78
2015-2016
Purge gas systems
During the welding of steel, oxidation occurs in the weld seam if oxygen reaches this area unhindered (10 ppm, 0.001% or less). The resulting
oxidized surfaces are no longer corrosion-resistant, and further treatment is necessary. Removing oxidation by grinding also removes the
metal's passive protection against corrosion. In some cases such as pipe welding, removing oxidation after welding is difficult or impossible to
do. Instead of removing oxidation, another solution is to prevent it from occurring in the first place. In essence, this is what purging tries to
achieve. With purging, a gas is used to protect the weld seam until it has cooled to the point that oxidation no longer can occur. Usually, an inert
gas, such as argon which is heavier than air, is used.
Conventional purge dams such as inflatable rubber bladders or cardboard discs traditionally must be placed far from the weld zone. Remote
placement of the purge dams may require large amounts of pure gas to be introduced to fully displace the oxygen into the weld zone. To
overcome these limitations, PGE minimizes the amount of gas and time needed to purge the weld zone properly
PGE120 consists of a basic unit and sealing- and support discs in different sizes, depending of the pipe dimensions to be welded.
The unique design of PGE 120 in combination with the flexible sealing discs makes it the perfect choice in the workshop as well as on site.
Use PGE 120 for the welding of pipe to pipe, pipe to bend or pipe to flange.
Going from welding of one pipe dimension to another, you simply change the sealing- and support discs on the basic unit. This is easily and
quickly achieved by using a spanner. PGE can be pulled through bends and the sealing discs are resistant to temperatures up to
320°C. Maximum content of oxygen: 25 ppm (0.0025%).
A300581#
A300583#
A300584#
A300585#
A300586#
A300587#
A300588#
A300589#
A300590#
A300591#
A300592#
A300593#
A300594#
A300595#
A300596#
A300597#
A300598#
A300599#
A300600#
A300601#
A300602#
A300603#
A300604#
A300605#
A300606#
A300607#
A300608#
A300609#
A300610#
A300620#
A300621#
A300622#
A300623#
A300624#
A300625#
A300626#
A300627#
A300628#
A300629#
A300630#
A300631#
A300632#
A300633#
A300634#
A300635#
A300636#
A300637#
A300640#
A300641#
A300642#
A300643#
A300644#
A300645#
A300646#
A300647#
A300648#
A300649#
A300650#
A300651#
Purge gas system PGE 120
Purge gas system
PGE 120 basic
Sealing discs (2) 2 mm PGE 120-180 21 Sealing discs (2) 2 mm PGE 120-180 23 Sealing discs (2) 2 mm PGE 120-180 26 Sealing discs (2) 2 mm PGE 120-180 31 Sealing discs (2) 2 mm PGE 120-180 35 Sealing discs (2) 2 mm PGE 120-180 38 Sealing discs (2) 2 mm PGE 120-180 42 Sealing discs (2) 2 mm PGE 120-180 45 Sealing discs (2) 2 mm PGE 120-180 52 Sealing discs (2) 2 mm PGE 120-180 58 Sealing discs (2) 2 mm PGE 120-180 67 Sealing discs (2) 2 mm PGE 120-180 77 Sealing discs (2) 2 mm PGE 120-180 80 Sealing discs (2) 2 mm PGE 120-180 86 Sealing discs (2) 2 mm PGE 120-180 95 Sealing discs (2) 2 mm PGE 120-180 100 Sealing discs (2) 2 mm PGE 120-180 111 Sealing discs (2) 2 mm PGE 120-180 118 Sealing discs (2) 2 mm PGE 120-180 124 Sealing discs (2) 2 mm PGE 120-180 136 Sealing discs (2) 2 mm PGE 120-180 145 Sealing discs (2) 2 mm PGE 120-180 156 Sealing discs (2) 2 mm PGE 120-180 193 Sealing discs (2) 2 mm PGE 120-180 201 Sealing discs (2) 2 mm PGE 120-180 240 Sealing discs (2) 2 mm PGE 120-180 265 Sealing discs (2) 2 mm PGE 120-180 290 Sealing discs (2) 2 mm PGE 120-180 300 Sealing discs (2) 3 mm PGE 120-180 27 Sealing discs (2) 3 mm PGE 120-180 35 Sealing discs (2) 3 mm PGE 120-180 41 Sealing discs (2) 3 mm PGE 120-180 53 Sealing discs (2) 3 mm PGE 120-180 65 Sealing discs (2) 3 mm PGE 120-180 80 Sealing discs (2) 3 mm PGE 120-180 93 Sealing discs (2) 3 mm PGE 120-180 103 Sealing discs (2) 3 mm PGE 120-180 122 Sealing discs (2) 3 mm PGE 120-180 131 Sealing discs (2) 3 mm PGE 120-180 142 Sealing discs (2) 3 mm PGE 120-180 154 Sealing discs (2) 3 mm PGE 120-180 188 Sealing discs (2) 3 mm PGE 120-180 203 Sealing discs (2) 3 mm PGE 120-180 242 Sealing discs (2) 3 mm PGE 120-180 254 Sealing discs (2) 3 mm PGE 120-180 294 Sealing discs (2) 3 mm PGE 120-180 300 Support discs (4)
PGE 120-180 21 Support discs (4)
PGE 120-180 101Support discs (4)
PGE 120-180 300 -
Katje Welding bv
25
26
30
34
37
42
46
51
57
66
73
81
85
94
100
110
117
123
135
144
155
166
201
215
250
275
300
315
36
40
50
60
75
86
103
116
130
136
150
164
200
215
250
275
300
315
42
60
85
100
130
154
166
230
250
275
300
315
page 79
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
2015-2016
Purge gas systems
The bigger the pipe, the longer it takes to fill a chamber with gas. Consequently, this cylinder has been developed. The chamber is only 3 cm
wide. The time to place PGE 210 and filling the chamber with gas, ensuring max. content of oxygen of 25 ppm (0,0025%) is carried out between
5 and 15 minutes, depending on the pipe size.
A300211#
A300212#
A300213#
A300214#
A300215#
A300216#
A300217#
A300218#
A300219#
A300220#
A300221#
A300222#
A300223#
A300224#
Purge gas system PGE 210
Purge gas system PGE 210-250
245
290
330
380
430
480
530
580
630
680
730
780
830
880
-
265
310
350
400
450
500
550
600
650
700
750
800
850
900
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
PGE 180 flex consists of a basic unit and sealing- and support discs in different sizes, depending of the pipe dimensions to be welded. The
unique design of PGE 180 flex in combination with the flexible sealing discs makes it the perfect choice in
the workshop as well as on site. Use PGE Flex for the welding of pipe to pipe, pipe to bend or pipe to
flange. Going from welding of one pipe dimension to another, you simply change the sealingand support discs on the basic unit. This is easily and quickly achieved by using a spanner.
To choose the correct discs for various pipe dimensions, please refer to the PGE 120 system.
A300582#
Purge gas system PGE 180 flex
Purge gas system PGE 180 basic flex
The new EZ purge flex is used from 25 mm ID up to 320 mm ID.The unique design of the silicone sealing disc ensures that the EZ Purge flex
always makes a perfect seal. It is very user friendly and easy to push, pull and postion in any pipe or fitting. The silicone sealing can stand up to
320°C.
A300655#
A300656#
A300657#
A300658#
A300659#
A300660#
A300661#
A300662#
A300663#
A300664#
A300665#
A300666#
A300667#
A300668#
A300669#
A300670#
A300671#
A300672#
Backing gas system EZ purge flex
Backing gas system EZ 032
25 - 31
32 - 40
41 - 50
52 - 61
62 - 74
75 - 86
85 - 101
Backing gas system EZ 120 100 - 110
25 - 165
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
WT Dams are used where it is not possible to use standard Purge Gas Equipment (PGE). Using the water soluble dams is a low cost way to
purge a pipe, a tee or a bend. The WT Dams are placed in the open ends, a new piece is attached, rinse and weld. The WT Dams will dissolve
when water is flowing through the pipes again.
A300290#
A300291#
A300292#
A300293#
A300294#
A300295#
A300296#
A300297#
A300298#
A300299#
A300300#
A300301#
A300302#
Water soluble purge gas dam
Water soluble purge gas dam WT - 2
Katje Welding bv
2”
3”
4”
5”
6”
8”
10”
12”
14”
16”
18”
20”
24”
page 80
2015-2016
Purge gas systems
FMT is the unique Foldable Marking Tool for pipes and bends. In less than 5 minutes pipes and bends are marked up for cutting in any
particular angle.
A300260#
A300261#
A300262#
Foldable Marking Tool
Foldable Marking Tool FMT-1
33 100 244 -
90 mm
219 mm
508 mm
WT Flange Leveller is always a good tool to have. The WT Flange Leveller can be used for flanges with bolt holes from 16 mm and up to
32 mm. With this design you avoid the chance of misplacing loose parts, and you will have no need of using adjusting tools.
A300265#
WT flange leveller
WT flange leveller WT-500 12 mm aluminum centers
Purge Monitor GM1 is a small hand-held instrument which facilitates welding of stainless steel by oxygen concentration monitoring down to
0.01% (100 ppm). GM1 is breast pocket portable (with pump and tubing slung over the shoulder).
Range:
Calibration:
Temperature range:
Dimensions:
Sensor:
Advantages:
Katje Welding bv
0.01- 25.00% oxygen concentration
20.9% (oxygen concentration in air)
0°C to 50°C
130 x 68 x 27mm
Thermo-electric Ø 20 x 30 mm
AA batteries 1.5V, 2 pcs robust battery cover, long battery life,
easy sensor replacement, minimum one year life, semi-automatic calibration.
page 81
2015-2016
Technical data and conversion tables
Lengths
1 inch (in)
1 foot (ft)
1 yard (yd)
1 mile
=
=
=
=
0.0254 mtr
0.3048 mtr
0.9144 mtr
1609.3 mtr
Mass
1 grain (gr)
1 ounce (oz)
1 pound (lb)
1 UK ton
1 Sh. ton
=
=
=
=
=
64.8 kg
28.35 gr
453.6 gr
1016.1 kg
907.2 kg
Volume
1 cubic foot (ft3)
1 UK gallon
1 US gallon
=
=
=
28.32 dm 3
4.546 dm 3
3.785 dm 3
Warmth
1 btu/h
1 btu/h
=
=
0.293 kW
0.398 p.k.
IMPORTANT INFORMATION RELATING TO GAS
Oxygen O2
Pressure
1 nm3
1 ltr
1 kg
-182.96ºC
90.19 K
= 1.148 ltr
= 0.871 nm 3
= 0.763 nm 3
= 1.311 kg
= 1.142 kg
= 0.876 ltr
Nirogen N2
1 nm3
1 ltr
1 kg
-195.80ºC
77.35 K
= 1.419 ltr
= 0.705 nm 3
= 0.872 nm 3
= 1.147 kg
= 0.808 kg
= 1.237 ltr
Argon Ar
-185.87ºC
87.29 K
1 nm
1 ltr
1 kg
3
KPa
kp/cm2
(at)
mm Hg
lbf/in2
(psi)
Atm.
1.013
1
0.98
0.0069
101.3
100
98
6.9
1.033
1.020
1
0.070
760
750
736
52.7
14.7
14.5
14.2
1
1
0.987
0.968
0.068
1.333
133.3
1.360
1000
19.33
1.316
1 mm water
1 inch Hg
1 torr
1 micron
= 1.168 ltr
= 0.856 nm 3
= 0.611 nm 3
=
=
=
=
9.81 Pa
3386.4 Pa
1/760 atm = 1 mm Hg bij 0ºC
10-6 mHg
Temperature
Carbon dioxide CO2
1 nm3
1 kg
bar
= 1.811 kg
= 0.552 nm 3
1 nm3 (at 0.981 bar and 15ºC).
Temperatures (boiling point at 1.013 mbar).
Fahrenheit - Celsius
ºC = 5/9 (ºF - 32)
Celsius - Fahrenheit
ºF = 9/5 (ºC) + 32
Celsius - Kelvin
K = ºC + 273
ROUGH AND READY RULE
SIDE ENTRY ACCORDING NEN 3268 (GAS CYLINDERS)
1 cu.ft.
1 cu.ft.
1 psi
1 kg/cm2
1 kW
1 Mcal/h
1 bar
1 bar
1 psi
1 mbar
1 mm WK
1 kcal
1 US gallon
1 Imp. gallon
1 pound (lb)
1 kg
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
0.02832 m 3
28.32 dm 3 of ltr
0.0703 kg/cm2
14.22 psi
0.86 Mcal/h
1.163 kW
1.02 kg/cm2
14.5 psi
0.0689 bar
10.2 mm WK
0.0981 mbar
3.968 btu
3.785 ltr
4.546 ltr
0.454 kg
2.205 pound (lb)
Side entry
information
Thread according
NEN 784
Thread
direction
LU 0
RU 1
LU 1
RI 2
LI 2
RU 3
RU 4
LU 4
RU 6
M 19 x 1.5
W 21.8 x 1/14”
W 21.8 x 1/14”
G 5/8” (22.9 x 1/14”)
G 5/8” (22.9 x 1/14”)
W 24.32 x 1/14”
W 1” (25.4 x 1/8”)
W 1” (25.4 x 1/8”)
W 28.806 x 1/14”
LH
RH
LH
RH
LH
RH
RH
LH
RH
Flow
Gas volumetric flow rate is often measured in cubic meters per hour (abbreviation m 3/h) under normal circumstances (see ISO 554),
related to the relevant chemical formula of the used gas.
Conversion coefficient U
TEST GAS
Air
Nitrogen
Air
1
0.983
Oxygen
0.950
0.930
Nitrogen
1.02
1
CONVERSION COEFFICIENT
Argon
Hydrogen
Helium
0.851
3.81
2.695
0.837
3.75
2.65
Acetylene
1.05
1.03
Propane
0.800
0.784
CO2
0.808
0.792
The conversion coefficient U may be empirically determined by the following formula:



U=
0
1
=
=
the specific weight of the test gas.
the specific weight of the process gas.
Katje Welding bv
page 82
2015-2016
Technical data and conversion tables
Brass
any alloy of copper and zinc => bright gold-like appearance
melting point approx. 900°C
Bronze
principally an alloy of copper and tin, dark - or brown gold alloy
Copper
chemical element, metallic bronze metal [symbol Cu, atomic number 29]
Pure copper is usually too soft for most uses. People first learned about 5000 years ago that copper can
be strengthened if it is mixed with other metals. The two most familiar alloys of copper are bronze and
brass.
Bronze, the first alloy created by people, is a mix of copper that contains as much as 25% tin. Early
people used bronze to make tools, weaponry, containers and ornamental items.
Brass, a mix of copper that contains between 5% and 45% zinc, was first used about 2500 years ago. The
Romans were the first to make extensive use of brass, using it to make such things as coins, kettles and
ornamental objects.
Melting point of various metal types
Metal/
alloy
Aluminum
Antimonium
Beryllium
Lead
Borium
Bronze
Cadmium
Chromium
Iron
Germanium
Gold
Cast iron
Stainless
steel 18/8
Cobalt
Symbol
Manganese
Brass
Mn
--
Al
Sb
Be
Pb
B
-Cd
Cr
Fe
Ge
Au
--Co
ºCelsius Metal/
alloy
660 Molybdenum
630 New silver
1285 Nickel
327 Niobium
2300 Palladium
± 1000 Platinum
321 Rhodium
1900 Selenium
1536 Silver
958 Silicium
1063 Steel
± 1200 Tantalium
± 1420 Titanium
Bismuth
1495
Tin
1245 Zirconium
± 900
Symbol
ºCelsius
Mo
-Ni
Nb
Pd
Pt
Rh
Se
Ag
Si
-Ta
Ti
Bi
2620
900
1453
2470
1552
1770
1960
220
961
1420
± 1500
2997
1700
271
Sn
Zr
232
1700
Normally soldering is performed with a normal, neutral welding
flame (figure 1). That is, parts must be heated up without a
carburizing or reducing welding flame. A mildly reducing
welding flame is used for braze welding (figure 2) in order to
avoid inhalation of zinc oxide fumes. A strongly carburizing
flame is used for hard facing with stellite (figure 3). Stainless
steel soldering is performed with a slightly, carburizing welding
flame in order to prevent carburizing and oxidation of the
surface zones of steel. Soft soldering processes will be carried
out with a soft, slightly carburizing flame (figure 3).
1. neutral flame
2. reducing flame (Oxygen surplus)
3. carburizing flame (Acetylene surplus)
Average combustion temperatures of gasmixtures
Oxygen - Acetylene approx. 3200ºC
Oxygen - Propane approx. 2500ºC
Oxygen - Hydrogen approx. 2370ºC
Air - Acetylene
approx. 2460ºC
Air - Propane
approx. 1750ºC
Katje Welding bv
page 83
2015-2016

KW Catalogue 2015-2016

Transcription

Similar documents

gas champ cutting machine pipe cutter pipe cutter pc

central gas supply

DICOM V3.0 Conformance Statement

Temperature Indicators

Live T26 Evo2 2011.cdr

with SVC PLUS