Valve Guide

Valve Guide
Head office
SOMAS Instrument AB
P.O. Box 107
SE-661 23 SÄFFLE
SWEDEN
Phone: +46 533 16700
Fax:
+45 533 14136
E-mail:[email protected]
www.somas.se
SOMAS - Valve Guide
Edition: 2015-04
Ball Segment Valves
KVTW/KVXW A-body*
KVTW/KVXW D-body*
KVT/KVX (PN 100)
KVTF/KVXF B-body
KVTF/KVXF C-body
Butterfly ValvesBall and Check Valves
KVTW/KVXW A-body*
KVTW/KVXW D-body*
KVT/KVX (PN 100)
”Mini Flow”
KVTF/KVXF B-body*
KVTF/KVXF C-body*
Wafer
Flanged
DN 80 - 100 (PN 25) A-body
DN 150 - 250 (PN 20
Class150) A-body
Standard face to face.
DN 80 - 250 (PN 25) D-body
Short face to face.
DN 80 - 250 (PN 50) B-body.
DN 80 - 400 (PN 25) C-body
ISA 75.04S.
DN 80 - 500 (PN 25) B-body
EN558 (15).
DN 600-700 (PN 10) B-body.
High capacity and large
control range.
Good tightness.
Torque transmission free
of backlash.
As per the wafer design.
Features
12 alternative seat
diameters for optimum
sizing
Pressure
Classes
PN 10 - 100
Class 150 - 600
PN 10 - 100
Class 150 - 600
PN 10 - 50
Class 150 - 300
CF8M
Titanium
HiNi
CF8M
Size
Material
(Valve Body)
DN 25/2 - 65
(PN 50,
Class 300)
DN 25/5 - 50
(PN 100)
CF8M
Titanium
HiNi
(2343-12)
PTFE
(DN 25/7-65) (PN 50)
PTFE 53 (DN 25/7-65) (PN 50)
HiCo (DN 25/2-65) (PN 50) (PN 100)
PEEK
(PN 100)
PTFE
PTFE 53
HiCo
PEEK
Kv 1
0.18 - 191
340 - 2410
Tightness
Class V Class VI
Material
(Seat)
Data Sheet
(HiCo)
( PTFE + 53)
Si-105, Si-110, Si-112, Si-113,
Si-114
Class IV
Class V
Class VI
(2343-12)
(DN 80 - 150)
(DN 80 - 150)
(PN 50)
(PN 50)
(PN 50) (PN 100)
(PN 100)
(HiCo)
(HiCo)
(PTFE + 53)
Si-105, Si-113, Si-114
(2343-12)
KVMF
KVMW
KVTF LN
KVXF LN
KVTW LN
KVXW LN
High Consistency
DN 40 - 300
Low Noise
VSS
MTV
MTVF
Wafer
Lugs
Flanged
DN 80 - 1200
DN 80 - 500
DN 80 - 600
(VSS)
(MTV)
(VSS PN 50,
Class 300)
(MTV)
DN 80 - 600
Cryogenic
DN 80 - 500
SKV
SKVT
Wafer
DN 50 - 600
FBG/FBS
FBF
Flanged
DN 25 - 400
DN 500
3-piece
Size
DN 8 - 100
(SKVT)
Wide range of applications
up to 550 °C.
Solid seat design - less
sensitive to high flow velocity
and impurities in the media.
As per the wafer design.
Suitable for end-of-line
applications PN 67 valve
intended for high pressure
steam applications.
As per the wafer design.
Suitable for end-of-line
applications.
Will prevent flashing and
cavitations.
Noise reduction
High capacity - low
pressure
High capacity - low
pressure drop.
Short closing
time.
Easy
maintenance.
Spring loaded seats for
tight shut-off at low
differential pressure.
With ISO-connection for
actuator mounting.
With threaded ends (FBG),
weld-ends (FBS) or with
flanges (FBF).
Features
PN 10 - 50
Class 150 - 300
PN 10 - 50
Class 150 - 300
PN 10 - 50
Class 150 - 300
PN 10 - 50
Class 150 - 300
PN 10 - 67
Class 150 - 300
PN 10 - 25
Class 150
PN 10 - 50
Class 150 - 300
PN 10 - 50
ANSI 150 - 300
PN 10 - 25
ANSI 150
PN 25 - 50
ANSI 150 - 300
PN 50
ANSI 300
Pressure
Classes
CF8M
(2343-12)
9cr-1Mo-V mod
CF8M
(CF8M)2343-12
(CF8M)
1.4462 / 1.4470
PTFE
Hi Co
1.4462 / 1.4470
PTFE
2343-12
(CF8M)
PTFE 53
HiCo
235 - 20780
235 - 10485
CF8M
(2343-12)
CF8M
(2343-12)
CF8M
(2343-12)
CF8M
(2343-12)
PTFE
PTFE 53
HiCo
PTFE
340 - 28740
96 - 3770
75 - 4285
0.18 - 2410
235 - 67000
Class VI
Class V
Class VI
Si-110, Si-111, Si-112, Si-113,
Si-114
Si-203, Si-204, Si-205, Si-206,
Si-207, Si-208
Si-110, Si-111, Si-112
DN 80 - 500
Low Noise
BCV
BCVA
For temperatures down
to –196 °C.
PTFE
PTFE 53
HiCo
(HiCo)
(HICo)
(PTFE + 53)
DN 100 - 500
(VSS)
(MTV)
(VSS PN 50,
Class 300)
(VSS PN 67/
100)
VSS LT
Prevent flashing and
cavitations.
Noise reduction.
PTFE
PTFE 53
HiCo
Class IV
Class V
Class VI
DN 80 - 800
DN 80 - 350
DN 80 - 500
VSS LN
For high consistency
applications.
Class IV
Class V
Class VI
(HiCo)
(HiCo)
(PTFE 53)
Si-110, Si-112, Si-113, Si-114
Class IV
Class V
Class VI
(HiCo)
(HiCo)
(PTFE + 53)
Si-108, Si-110, Si-111, Si-112,
Si-113, Si-114
1
Cv = 1.16Kv
HiCo = High Cobalt Alloy
HiNi = High Nickel Alloy
*Ball segment wafer style A-body standard face to face
*Ball segment flanged style
B-body standard face to face
Cryogenic
DN 25/2 - 250
DN 50 - 500
VSS
MTV
KVTW LT / KVXW LT
KVTF LT / KVXF LT
1.4462 / 1.4470
PTFE
(1.4462)
(PTFE)
Class V
Class VI
(2343-12)
CF8M
(2343-12)
1.4462 / 1.4470
PTFE
(CF8M)
2343-12
1.4462 / 1.4470
PTFE
2343-12
(CF8M)
PTFE (std.)
PTFE25 2 (Option)
2
(1.4462)
(PTFE)
Si-203, Si-204, Si-205, Si-206,
Si-208, Si-209
Class V
Class VI
Si-205
120 - 7650
(1.4462)
(PTFE)
(DN 80 - 500)
Class V
Class VI
235 - 10485
(1.4462)
(PTFE)
Si-211
Class V
Class VI
Si-210
(1.4462)
(PTFE)
—————
80 - 26850
Class V
Class IV
Class V
Class VI
Si-710
Si-706
Seat material 1.4462 and 1.4470 are corresponding to 2377
D-body short face to face
C-body short face to face
Actuator
Doubleacting
The actuator type A-DA is a double-acting piston actuator for rotary motion. It is specially designed to meet the torque requirements for ball
segment, ball and butterfly valves. The patented backlash free connection to the valve shaft offers the best possible solution to optimise
control performance. With torque figures up to 20 000 Nm it covers the complete range of SOMAS valves. The actuator has ISO-connection to
the valve and connection according to VDE/VDI 3845 to the accessories. Stainless steel screws, rods and nuts as standard.
Bus communication On/Off application
SOMAS offers bus communication with AS-i interface for On/Off application. This solution reduces wiring time and cost and increases
flexibility to the end-user. SOMAS take full responsibility for function, assembly and testing.
Actuator
Springreturn
The single acting type A-SC has a spring to close function while the type A-SO has a spring to open function. Both types are built on the same
principle as the double acting type and completed with a spring package to achieve the desired function. The spring is built into a package to
secure safe maintenance. The other features mentioned above for the double acting type are also valid for the single acting types.
Locking device and manual override are available as additional equipments for the SOMAS actuators type A.
Bus communication Control application
SOMAS supplies digital positioner with Profibus PA or Foundation Fieldbus from leading manufactures so that we can meet your specification,
and fully integrate into existing systems. SOMAS assembles and tests the function. If there are special needs for configuration/set up we can
configure this before despatch.
Positioner
The pneumatic positioner type SP405
is designed for a pneumatic input signal 20 - 100 kPa (3 - 15 psi) or split-range. The positioner is as standard equipped with a linear cam and as an
alternative with a cam that gives an equal percentage characteristic. It offers high flow capacity and easy adjustment of span and zero.
The electro pneumatic positioner type SPE405
is built on the pneumatic version type SP405, which has been completed with an I/P-converter. This I/P-converter is located in a separate
housing which is connected to the pneumatic part. Capacity and adjustment as per type SP405 and an input signal 4-20 mA.
Positioner
Digital
Positioner
SOMAS offers intelligent control solutions by using valves and actuators of own design in combination with digital positioners from leading suppliers.
We take full responsibility for function, assembly and testing. Out flexibility offers the most “state-of-the-art” solutions for all
demanding applications within all types of branches.
The valve can be equipped with different types of manual actuators such as hand lever and gear unit and accessories such as mechanical
switches and proximity switches depending on the application.
Hand levers and gear units can be equipped with locking device.
Manual
Actuators and
Accessories
Bus
system
Bus
system
SOMSIZE – The SOMAS valve sizing program
By using SOMSIZE you will easily find the right type of valve and the right
size for your application.
SOMSIZE is a windows based program.
Formulas for flow calculations are according to EN 60534-02-1
and noise calculations are according to VDMA 24422.
Beside the valve sizing you can also have a valve specification complete
with actuator and accessories along with main valve dimensions.
Contact SOMAS or our representatives
for further information.
2343-12
25% carbon powder
8 - 1586
(HiCo)
(HiCo)
(PTFE 53)
Class VI
Si-704
Material
(Valve Body)
Material
(Seat)
Kv 1
Tightness
Data Sheet