Old Orechard Hall Stand穿衣镜.ai

Assembly Instructions
Old Orchard Hall Stand
Before you begin to assemble your new piece of furniture, please check to ensure that all parts have been supplied.
Follow instructions closely as deviation from them may void your warranty and present a possible safety risk.
It is recommended that assembly is done on a soft surface like carpet to avoid any damage.
If you experience any problems with your new purchase please phone our Customer Service Hotline 1800 807 416 (Customers
outside Australia should contact their closest Freedom store.)
Care Information
Periodically check and re-tighten any fasteners. Wipe down all surfaces weekly with a clean cloth. Do not clean any surfaces with
harsh abrasives or chemicals.
Hardware
6xPart A
12xPart B
12xPart C
12xPart D
2xPart E
1xPart F
Parts
1xPart G
Page 1
2xPart H
1xPart I
4xPart J
1xPart K
Assembly Instructions
Old Orchard Hall Stand
HOW TO REMOVE DRAWER:
Step: 1
---HOLD THE LEFT CLIP ON THE LEFT RUNNER UP WHILE PUSHING
THE RIGHT CLIP DOWN ON THE RIGHT RUNNER.
Part I
LEFT RUNNER
Ball Bearing Drawer Slides,
Fully Extending Type
RIGHT RUNNER
Step: 2
E
Part G
Part J
E
Part J
Part J
x2
D
C
Page 2
Part J
x2
F
Assembly Instructions
Old Orchard Hall Stand
A x6
Step: 3
B x12
F
Part H
x2
C
Part H
D
x2
D
x2
F
C
x2
Step: 4
Finished:
Part K
Page 3