MultiChoice™ Universal Pressure Balance Tub and Shower

Transcription

MultiChoice™ Universal
Pressure Balance Tub and Shower
Formerly 11T5 Series
T13H163
TRIM
• Scald Guard Cartridge Requires
less Maintenance.
• Long Life, Low Maintenance, with
Machined Brass Parts.
• Blue/Red Visual valve cover indicator
for Cold, Hot/Cold mixing and
Hot outlet water handle positions.
• Safer Operation as Lever
Handle ALWAYS OPENS
with “COLD” water first.
• Low TURNING FORCE Vandal
Resistant Metal Lever Handle for Easier
Operation. ADA compliant.
• Maximum Temperature Control PRE-SETTING Stop
is located under the Handle. Meets ASSE 1016 High
Temperature Rotational Limit Stop Requirement.
• Delta Monitor ® shower/bath valves are ENGINEERED to
provide user PROTECTION through the following built-in
SAFEGUARDS:
• Monitor PRESSURE BALANCE Control.
• Lever Handle ALWAYS OPENS Cold Water Flow First.
• Limit Stop for PRE-SETTING Maximum Temperature.
• INTEGRAL CHECKS in the Cartridge Prevent Crossflow
between Hot and Cold Water Inlets.
• Wider COMFORT Zone.
• ADA Compliant handle meets Handicapped
Accessibility Standard ASME A117.1 of less than 5 LBS.
Operating Force.
Refer to www.specselect.com for individual models.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Page 2.C.1
R10000-UNWS
ROUGH-IN
(INTEGRAL STOPS SUPPLIED STANDARD – NOT SHOWN)
• Mounting Bracket – Provides a sturdy
method to secure the valve to a stringer
and prevents rocking.
• Square Plasterguard –
Standard tile size allows
for simple 90° cuts.
• Heavy Duty Forged Brass
one piece valve body.
• Heat-Resistant Pressure Test Cap –
Allows for water testing up to 300 psi
before the valve cartridge is installed.
Easy access for flushing out the system.
• Chrome Plated Bonnet Nut –
Allows for easy removal during
maintenance, even after years of use.
• 1/2" Universel Inlets to accept 1/2" copper, 1/2" iron pipe, PEX or CPVC adaptors.
• 1/2" Universel Outlets, inlets/outlets have male threads.
• Integral Stops (supplied standard with R10000-UNWS and R10700-UNWS Rough-Ins – NOT SHOWN)
for service and maintenance at any individual tub and shower valve allowing continued normal use of other valves
in the same room or area.
• Increased Flow allows faster filling of tubs.
• R10700-UNWS – Rough-In for Pressure Balancing Valve with separate In-Wall Diverter Valve.
Note: Use this page as a product submittal sheet.
See Page 2.C.7 for additional Rough-In options.
Specification: (example)
❏ R10000-UNWS ROUGH-IN only
•
•
•
•
Concealed in-wall MultiChoice™ universal valve
Back-to-back capability, Integral screwdriver stops
Heavy Duty forged brass valve body
1/2" Universal inlets to accept 1/2" copper,
1/2" iron pipe, PEX or CPVC adaptors
• 1/2" Male thread inlets/outlets
T13H163
❏ FINISH TRIM ONLY:
• Pressure Balancing cartridge with checks
T13H153
• Polished chrome plated finish
• 57mm (2.24'') ADA Compliant valve handle
and … with … (add product variation)
with … (add shower)
TUB AND SHOWER DESCRIPTION
ROUGH-IN Valve
FINISH TRIM only
Engineer/Architect Approval
Model Specified:
Approval:
PRODUCT NO.
R10000-UNWS
T13H
PRODUCT VARIATION
3
Date:
HANDLE
SHOWER
✔
✔
✔
0
Specify ''0''
When No Shower
Outlet Required
0
1
Standard Brass Fixed
Spray Showerhead
Arm & Flange
2.2 USGPM (8.4 L/min.)
1
2
Dual Spray TouchClean Showerhead,
Arm & Flange
2
3
3
Push-Clean
Showerhead
Arm & Flange
3
4
4
0
1
2
Shower Valve Only
Tub and Shower
4
5
Handshower, VB (ASSE)
610mm (24'') Combination
S/S Slide Grab Bar
5
6
6
30° Vandal Resistant
Cast Wallmount
Showerhead
6
7
7
Handshower, VB (ASSE)
Wall Elbow,
2 Wall Hooks
7
8
8
H2Okinetic Technology™
Showerhead, Arm & Flange,
8
9
9
Adjustable, Metal
9
5
SET SCREW SHOWER ARM FLANGE SUPPLIED ON SHOWER OPTION NO. 1, 2, 3, 8, AND 9.
FLOWRATES ARE AT 80 PSI.
See Page 2.C.4 for Add-On options available.
See Page 2.C.7 for additional Rough-In options.
57mm (2.24'')
Lever Blade
Handle
Note: Use this page front and back as a product submittal sheet.
See current price list for product availability.
Page 2.C.2
Approvals:
• CSA certified
• Complies to ASME A112.18.1
• Pressure Balance Handle ADA Compliant
and meet Handicapped Accessibility
Standard ASME A117.1 of less
than 5 lbs. operating force.
• ASSE 1016
• Handshower Vacuum Breaker Certified
under ANSI A1121.3 (ASSE 1011)
• IAPMO listed
(Contact Delta Representative for State and/or
Local Approvals.)
70mm
(2.75")
102mm
(4.0")
152mm
(6.0")
910mm
(36.0")
OPTIONAL
FLOWRATE vs PRESSURE
FLOW
(l /min.)
Shower Outlet Flowrates
FLOW
(USGPM)
3.5
13
12
3
11
10
2.5
9
8
2
7
6
51mm
(2.0")
1.5
5
4
3
1
2
.5
1
0
0
10
0
20
30
40
50
60
70
80
Line Pressure (psig)
Shower Outlets
No. 1 (060890A)
No. 6 (060793A)
No. 8 (RP46384)
STOPS
METAL BLADE
HANDLE
178mm
(7.0") Ø
HOT & COLD
INLETS
14 0 0
No. 2 & 3
(RP28601, RP38357)
No. 5 & 7 (RP7405)
C
L VALVE BODY
No. 9 (060653A)
FLOW
(l/min.)
FLOW
(USGPM)
Tub Filler Flowrates
FRONT VIEW
SIDE VIEW
8
29.5
28
910mm
(36.0")
OPTIONAL
7.5
26.5
7
25
6.5
23.5
6
22
R10000-UNWS Rough-In
with
T13H133 Trim
TO FLOOR
5.5
20.5
5
19
17.5
4.5
16
4
14.5
3.5
13
11.5
3
20
30
40
50
60
70
80
DSP-T13H1 Rev. A
P/B VALVE INLETS:
1/2'' Universal inlets accept 1/2" copper,
1/2" Male thread inlets/outlets
Note: Measurements may vary ± 6mm (0.25'')
MultiChoice™ Universal Pressure Balance Tub
and Shower with Diverter Valve for Dual Showers
❏ R10700-UNWS ROUGH-IN only
• Concealed in-wall MultiChoice™ universal valve
• Heavy Duty forged brass valve body, Integral screwdriver stops
• 1/2" Universal inlets to accept 1/2" copper,
• 1/2" Male thread inlets/outlets, Back-to-back capability
• In-wall diverter valve
T13H923
❏ FINISH TRIM ONLY:
• Pressure Balancing cartridge with checks
• Polished chrome plated finish
• 57mm (2.24'') ADA Compliant valve handle
• 68mm (2.68'') ADA Compliant diverter handle
and … with … (add product variation)
with … (add shower)
TUB AND SHOWER DESCRIPTION
ROUGH-IN with Diverter Valve & Stops
FINISH TRIM only
Engineer/Architect Approval
Model Specified:
Approval:
PRODUCT NO.
R10700-UNWS
T13H
PRODUCT VARIATION
3
0
1
2
Shower, Handshower,
ASSE VB, Diverter Valve,
610mm (24")
Combination S/S
Slide/Grab Bar (1)
4
5
Shower, Handshower,
Diverter Valve,
VB, Wall Elbow,
2 Wall Hooks (1)
6
Tub & Shower
(Same as No. 5 above)
but with Diverter
Spout (1)
HANDLE
SHOWER
✔
3
Date:
✔
✔
0
Specify ''0''
When No Shower
Outlet Required
0
1
Standard Brass Fixed
Spray Showerhead
Arm & Flange
1
2
Dual Spray TouchClean Showerhead,
Arm & Flange
2
3
Push-Clean
Showerhead
Arm & Flange
3
4
4
5
5
6
30° Vandal Resistant
Cast Wallmount
Showerhead
7
8
8
H2Okinetic Technology™
8
9
Adjustable, Metal
9
9
7
(1) Product Variations 3 and 5 to 9 require selection of the second showerhead from Shower Option No. 1, 2, 3, 6, 8, or 9.
Set screw shower arm flange supplied on Shower Option No. 1, 2, 3, 8, and 9.
✔
6
7
Tub & Shower
(Same as No. 3
above) but with
Diverter Spout (1)
57mm (2.24'')
Lever Blade
Handle
Flowrates are at 80 PSI.
See Page 2.C.4 for Add-On options available.
See Page 2.C.7 for additional Rough-In options. Note: Use this page front and back as a product submittal sheet.
Page 2.C.3
MultiChoice™ Universal Pressure Balance Tub
and Shower with Diverter Valve for Dual Showers
Approvals:
• CSA certified
• Complies to ASME A112.18.1
• P/B and Diverter Lever Handles
ADA Compliant and meet
Handicapped Accessibility
Standard ASME A117.1 of less
than 5 lbs. operating force.
• Pressure Balance Valve ASSE 1016
• Handshower Vacuum Breaker Certified
under ANSI A1121.3 (ASSE 1011)
• IAPMO listed
(Contact Delta Representative for State and/or
Local Approvals.)
I
178mm
(7.0")
Shower Outlet Flowrates
82-92mm
(3.213"- 3.613")
PLUG FOR
SECOND INLET
76mm
(3.0")
2 OUTLETS
TO SHOWER
INLET
FROM
MAIN
VALVE
FLOW
(l /min.)
SIDE VIEW
70mm
(2.75")
INLET C
L
FLOW
(USGPM)
1/2" F.I.P.
INLET/OUTLET
C
L OUTLET
21mm
(0.813")
12
3
51mm
(2.0")
11
10
2.5
9
8
2
STOPS
METAL BLADE
HANDLE
C
L VALVE BODY
7
6
813mm
(32.0")
OPTIONAL
508mm
(20.0")
OPTIONAL
3.5
13
610mm
(24.0")
910mm
(36.0")
OPTIONAL
HOT & COLD
INLETS
1.5
5
4
3
1
2
.5
1
0
0
0
10
20
30
40
50
60
70
80
121mm
(4.75")
Shower Outlets
No. 1 (060890A)
No. 6 (060793A)
No. 8 (RP46384)
1/2"F.I.P.
44-66mm
(1.75"-2.50")
No. 2 & 3
(RP28601, RP38357)
89mm
(5.25")
910mm
(36.0")
OPTIONAL
TO FLOOR
76mm 76mm
(3.0") (3.0")
No. 9 (060653A)
HAND SHOWER
OUTLET
Product Variations
No. 3, 5, 6 & 9 (RP7405)
813mm
(32.0")
OPTIONAL
FLOW
(l/min.)
FRONT VIEW
305mm
(12.0")
OPTIONAL
FLOW
(USGPM)
Tub Filler Flowrates
OPTIONAL OPTIONAL
76mm
(3.0")
INLET
WALL SHOWER
OUTLET
229mm
(9.0")
8
29.5
28
7.5
26.5
7
25
6.5
23.5
6
22
R10700-UNWS Rough-In
with
T13H923 Trim
5.5
20.5
5
19
17.5
4.5
16
4
14.5
3.5
13
11.5
3
20
30
40
50
60
70
80
DSP-T13H3 Rev. A
178mm
(7.0") Ø
P/B VALVE INLETS:
1/2'' Universal inlets accept 1/2" copper,
1/2" Male thread inlets/outlets
DIVERTER VALVE:
1/2'' FIP inlets/outlets
Tub and Shower Add-On Options
DESCRIPTION
ADD-ON NUMBER
P/B Valve Add-On Options
—
HOSE, ETC.
MISCELLANEOUS
✔
✔
✔
0
USE ''0'' For
No Selection
1
Quick
Disconnect
For Hose (2)
1
2
1753mm (69'')
Long CP Brass
Double Spiral
Hose (2)
2
3
Same as No. 2
Above but with
Quick Disconnect (2)
3
4
0
USE ''0'' For
No Selection
-05
-03
Adjustable Volume
Control
(attaches to
showerarm)
4
5
914mm (36'')
Combination
S/S Slide/Grab Bar (3)
-10
-35
Notes:
(1) A Number from each option column must be used for a complete Product Add-On
(2) Base Product for the HOSE, ETC. options must be from PRODUCT VARIATION TRIM
No.’s 3, 5, 6 or 9 or must include SHOWER option No. 5 or 7
(3) Base Product for combination S/S Slide/Grab Bar must be from PRODUCT VARIATION TRIM
No.’s 3 or 9, or must include SHOWER option No. 5
HOW TO SELECT AND SPECIFY ADD-ON OPTIONS:
Example No. 1: Base Product selected is R10700-UNWS Rough-in, and a T13H323 with 36" Combination S/S Slide/Grab Bar.
36" Combination S/S Slide/Grab Bar Add-On Suffix Number is -05
Product Number to Specify: R10700-UNWS Rough-in and T13H323-05 Trim
Page 2.C.4
Handshower Accessories
❏ 060733A
610mm (24'') sliding handshower bar,
vertical mounting pin, polished chrome
plated finish, vandal resistant concealed
mounting. (NOTE: Sliding bar NOT to
be used as a grab bar.)
❏ 060262A
As above but 1219mm (48'') long
❏ 060798A
1/2'' NPT inlet/outlet polished chrome
plated brass atmospheric in-line vacuum
breaker. Certified under ANSI A1121.3
(ASSE 1011).
❏ RP32550
Brass showerarm mounted diverter tee,
polished chrome plated finish.
❏ RP7405
Handshower head with stop button and
2.5 USGPM (9.5 L/min.) flow control.
❏ 060304A
610mm (24'') combination stainless steel
slide/grab bar, 1778 mm (70") white vinyl
hose, push button handshower head, ASSE
vacuum breaker, wall supply elbow &
flange.
❏ 060306A
As above but with 914 mm (36") stainless
steel slide/grab bar.
(See Shower No. 5 & 7 – Page 2.C.2
See Product Variation No. 3, 5, 6 & 9
– Page 2.C.3)
FLOW
(USGPM)
FLOW
(l /min.)
3.5
13
❏ 060827A
Brass swivel handshower connector,
polished chrome plated finish, with
hole for vertical mounting pin,
1/2'' NPS inlet/outlet).
12
3
11
10
2.5
9
8
2
7
RP7405
❏ RP7406
As above but plastic and chrome plated
brass.
6
4
3
1
❏ 060828A
Brass showerarm mount with pin, polished
chrome plated finish.
2
.5
1.5
5
1
0
0
0
10
20
30
40
50
60
70
80
❏ RP12504
Brass wallmounted bracket, vertical
mounting pin, polished chrome plated
finish.
❏ 060303A
Brass wallmounted elbow, flange, polished
chrome plated finish,1/2'' NPT inlet &
outlet.
❏ 060312A
1778mm (70'') long white vinyl
handshower hose, nylon reinforced.
❏ 060731A
1753mm (69'') long chrome plated
brass double spiral handshower hose.
❏ 060252A
Quick disconnect connectors for
handshower hose.
DSP-SHWA Rev. A
Shower Accessories
Cast brass institutional wallmounted
shower head, polished chrome plated
finish, 2.0 USGPM (7.6 L/min.) flow
control fixed spray, concealed cast brass
mounting plate, vandal resistant front
mounting screws, universal 1/2''
FIP/copper sweat inlet.
❏ 060793A
30° spray angle from wall.
(See Shower No. 6 – Page 2.C.2
and 2.C.3)
❏ 060852A
Brass body diverter valve,
ADA compliant lever handle,
polished chrome plated metal trim.
(See Product Variations
No.’s 3, 5, 6 & 9 – Page 2.C.3)
76 mm (3") Diameter wall thermometer, 18 to 82
degrees C (0 to 180 degrees F), stainless steel
construction with shatterproof Lexan lens,
complete with cast brass tee, polished
chrome plated brass
nipple and set screw wall flange.
❏ 060274A
❏ 060890A
Brass body showerhead fixed
2.2 USGPM (8.4 L/min.) flow control
spray, polished chrome plate finished.
and 2.C.3)
In-wall, volume control stop, TUF-TECK
institutional structure, polished chrome plated
finish exposed metal trim, color indexed metal
handle with vandal resistant screw, 1/2'' FIP
inlet/outlet.
❏ RP28601
Dual Spray Touch-Clean®, chrome
plated finish, brass ball showerhead,
2.5 USGPM (9.5 L/min.).
and 2.C.3)
❏ 54T1200
With 70mm (2-3/4") ADA compliant lever blade
handle and integral stop.
❏ RP38357
Touch-Clean™, polished chrome plated
finish, brass ball showerhead,
2.5 USGPM (9.5 L/min.).
and 2.C.3)
❏ 060732A
Brass body volume control, polished
chrome plated finish, flow adjustment
lever handle, 1/2'' NPS inlet/outlet.
❏ 060653A
Adjustable, metal showerhead,
2.5 USGPM (9.5 L/min.).
3 spray modes: full, massage,
and combination spray.
and 2.C.3)
❏ 060605A
Forged brass Toe Tester Spout,
polished chrome plated finish,
1/2'' FIP inlet.
❏ 060710A
Brass bent showerarm, metal set
screw wall flange,
polished chrome plated finish.
(Supplied with Shower
No. 1, 2, 3, 8, & 9)
❏ RP46384
H2Okinetic Technology™ Showerhead,
1.6 USGPM (6.0 L/min.).
and 2.C.3)
Flowrates are at 80 PSI.
Page 2.C.5
Shower Accessories
060793A SHOWERHEAD
ANCHOR PLATE
102mm
(4”)
73mm
(2.88”)
73mm
(2.88”)
44mm
(1.75”)
46mm
(1.81”)
Internal Cup for
1/2” Copper Connection
Finished Wall
76mm
(3.0”)
Wrench
Lugs
(3) - 7mm (.28”) Holes for
Lag Screws
Boss with female
1/2” I.P. Thread
54T1200 CONTROL VALVE
30°
060852A DIVERTER VALVE
44-66mm
(1.75”-2.5”)
35mm DIA.
(1.38”)
Hole
1/2” F.I.P.
68mm
(2.68”)
1/2” F.I.P.
INLET / OUTLET
48mm
(1.88”)
70mm
(2.75”)
OUTLET
21mm
(.81”)
INLET
61-71mm
(2.4”-2.8”)
28mm DIA.
(1.13”)
Hole
1/2” F.I.P.
060274A WALL
THERMOMETER
060605A TOE TESTER SPOUT
1/2" Copper sweat
Both ends
55mm DIA.
(2.15")
41 to 76mm
(1.63” to
3.0”)
1/2" F.I.P.
48mm
(1.90")
DSP-SHWB Rev. A
Handshower Packages
❏
060123A
SHUT-OFF
BUTTON
CP BRASS & PLASTIC
SWIVEL ELBOW
ITEM #
1
2
3
4
❏
DESCRIPTION
Handshower with Shut-off Button 2.5 U.S.GPM (9.5 L/min.) Flow Control
1778mm (70'') Long White Vinyl Handshower Hose with Nylon Reinforcement
CP Brass Wallmount Bracket w/Vertical Mounting Pin and Screws
CP Brass & Plastic Swivel Handshower Elbow for Vertical Mounting Pin
060124A
SHUT-OFF
BUTTON
CP BRASS & PLASTIC
SWIVEL ELBOW
NOTE:
SLIDING BAR
NOT TO BE
USED AS GRAB
BAR.
ITEM #
1
2
3
4
DESCRIPTION
610mm (24'') CP Sliding Handshower Bar w/Vertical Mounting Pin and Screws
Page 2.C.6
Handshower Packages
060127A
❏
FLOW
(l /min.)
Handshower Package Flowrates
FLOW
(USGPM)
3.5
13
12
3
11
10
SHUT-OFF
BUTTON
CP BRASS & PLASTIC
SWIVEL ELBOW
2.5
9
8
*SUGGESTED CHECK HEIGHT
AGAINST LOCAL
BUILDING CODES.
2
7
6
1.5
5
4
3
1
2
.5
1
0
NOTE:
SLIDING BAR
NOT TO BE
USED AS
GRAB BAR.
0
0
1/2"
FNPT/COPPER
(NOT
SUPPLIED)
ASSE
APPROVED
VACUUM
BREAKER
44mm-76mm
(1.75"-3.0")
51mm
(2.0")
64mm ±10mm
(2.5" ±.385")
*2210mm
(87")
ITEM #
89mm
(3.5")
1
2
3
4
5
10
20
30
40
50
60
70
80
Handshower Packages
060123A, 060124A,060127A, 060132A
DESCRIPTION
610mm (24'') CP Sliding Handshower Bar w/Vertical Mounting Pin and Screws
Wall Mounted ASSE Approved Vacuum Breaker
060132A
❏
SHUT-OFF
BUTTON
CP BRASS & PLASTIC
SWIVEL ELBOW
ITEM #
ASSE APPROVED
VACUUM BREAKER
1
2
3
4
5
6
DESCRIPTION
CP Brass Wallmount Bracket w/Vertical Mounting Pin and Screws
CP Brass Wallmount Elbow and Flange
CP Brass ASSE Approved Vacuum Breaker
DSP-SHWC
Multichoice™ Universal
Rough Valve Body
HDF®
■ R10000-UN (Case Qty 12)
■ R10000-UNBX (Case Qty 3)
■ R10000-UNBXT (Case Qty 3)
■ R10000-UNWS (Case Qty 12)
■ R10000-PX (Case Qty 12)
■ R10000-PXWS (Case Qty 12)
■ R10000-IP (Case Qty 12)
■ R10000-IPWS (Case Qty 12)
R10000-UN
R10000-UNBX
R10000-UNBXT
R10000-PX
R10000-IP
R10000-UNWS
R10000-PXWS
R10000-IPWS
Submitted Model No.:__________________________________________________
Specific Features: _____________________________________________________
R10000-UN
R10000-UNBX
R10000-UNBXT
2 1/8"
(54 mm)
4"
(102 mm)
without valve using supplied test cap.
• Square plasterguard allows for right angle cuts.
• Thin wall mounting.
• For use with MultiChoice™ Universal single or dual
2 3/4"
(70 mm)
4"
(102 mm)
STANDARD SPECIFICATIONS:
• Forged brass body.
• Back-to-Back installation capabilities.
• Can be tested with air (200 PSI) or water (300 PSI)
function trim. Cartridge ships with trim.
3 3/8"
(86 mm)
Finished Wall
Stringer
R10000-UNWS
UP
C
®
5 1/16"
(135 mm)
2 1/8"
(54 mm)
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
2 3/4"
(70 mm)
3 3/8"
(86 mm)
4"
(102 mm)
4"
(102 mm)
Finished Wall
Stringer
DSP-B-R10000-HDF Rev. D
Page 2.C.7
Tub and Shower
Faucet Trim
HDF®
■ Valve Only (T13090)
■ Shower Only (T13290)
■ Tub/Shower (T13490)
T13090
T13290
T13490
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
7"
(178 mm)
8"
(203 mm)
min.
18"
(457 mm)
max.
• Monitor® 13 Series pressure balanced bath
mixing valve with Scald-Guard®.
• Maintains a balanced pressure of hot and cold
water even when a valve is turned on or off
elsewhere in the system.
• For use with MultiChoice™ Universal rough
valve body. (R10000 Series)
• Back-to-back installation capability.
• Temperature only controlled with vandal
resistant blade handle.
• Field adjustable to limit handle rotation into hot
water zone.
• 120° maximum handle rotation.
• All parts replaceable from the front of the valve.
• Push Clean™ Showerhead/1 Spray Pattern
(T13290, T13490)
• Metal Tub Filler with Pull-up Diverter (T13490)
Supply
Face of plasterguard
should be flush with
finish wall line
UP
C
®
2-3/4"
(70 mm)
COMPLIES WITH:
• ASME A112.18.1
• CSA B125
•
Indicates ADA compliance to
ICC/ANSI A117.1
ASSE 1016
Page 2.C.8
DSP-T13090
Tub and Shower
Faucet Trim
HDF®
■ Valve Only (T13091)
■ Shower Only (T13291)
■ Tub/Shower (T13491)
T13091
T13291
T13491
7"
(178 mm)
8"
(203 mm)
min.
18"
(457 mm)
max.
• Monitor® 13 Series pressure balanced bath
mixing valve with Scald-Guard®.
• Maintains a balanced pressure of hot and cold
water even when a valve is turned on or off
elsewhere in the system.
• For use with MultiChoice™ Universal rough valve
body. (R10000 Series)
• Back-to-back installation capability.
• Temperature only controlled with metal lever
handle.
• Field adjustable to limit handle rotation into hot
water zone.
• 120° maximum handle rotation.
• All parts replaceable from the front of the valve.
• Push Clean™ Showerhead/1 Spray Pattern
(T13291, T13491)
• Metal Tub Filler with Pull-up Diverter (T13491)
Supply
Face of plasterguard
should be flush with
finish wall line
UP
C
®
2-3/4"
(70 mm)
COMPLIES WITH:
• ASME A112.18.1
• CSA B125
•
ICC/ANSI A117.1
ASSE 1016
DSP-T13091
Page 2.C.9
Handshowers
HDF®
■ 24" (610 mm) Slide/Grab Bar
(RPW124HDF, RPW324HDF)
■ 36" (914 mm) Slide/Grab Bars
■ Atmospheric Vacuum Breaker
■ 90° Wall Supply Elbow (RPW324HDF,
RPW336HDF)
RPW124HDF
RPW136HDF
RPW324HDF
RPW336HDF
Shut Off on
Sprayhead is
Not Positive
24"
(610 mm)
or
36"
(914 mm)
Available
3"
(77 mm)
Dia.
• Personal white ABS hand held shower with fixed
spray with push button on-off control, not a
positive shut-off.
• 69" (1753 mm) double spiral metal hose.
• 24" (610 mm) and 36" (914 mm) stainless
steel finish slide/grab bars.
• ADA compliant adjustable slide mechanism.
• Chrome plated atmospheric vacuum breaker,
1/2" IPS female inlet, 1/2"-14 NPSM male threaded
outlet for exposed applications only.
(Models RPW324HDF and RPW336HDF only).
• 90° chrome plated wall supply elbow, 1/2" IPS
female inlet; 1/2"-14 NPSM male threaded outlet.
(Models RPW324HDF and RPW336HDF only).
• 2.5 gpm @ 80 psi (9.5 L/min @ 552 kPa)
from sprayhead.
69" (1753 mm)
Double Spiral
Metal Hose
RPW124HDF
RPW136HDF
Accepts 1/2"-14
NPSM (male)
Shut Off on
Sprayhead is
Not Positive
6
0
69
138
Pressure (kPa)
207
276
345
414
483
552
3"
(77 mm)
Dia.
Accepts 1/2"-14
NPSM (male)
621
22.7
18.9
5
69" (1753 mm)
Double Spiral
Metal Hose
RPW324HDF
RPW336HDF
ICC/ANSI A117.1
15.1
4
11.4
3
7.6
2
3.8
1
0
Flow (Liters Per Minute)
Vacuum
Breaker
24"
(610 mm)
or
36"
(914 mm)
Available
COMPLIES WITH:
Flow (U.S. Gallons Per Minute)
Wall Supply
Elbow - 90°
0
10
20
30
40
50
60
Pressure (PSI)
70
80
90
0
Page 2.C.10
DSP-RPW-124-HDF Rev. D

MultiChoice™ Universal Pressure Balance Tub and Shower

Transcription

Similar documents

hand held spray - Water Tight Canberra

GW 031B - GULIWER Electronics

Temptrol®

9718 Aquael - Acri-tec

647 $197 $377 $797 $1447 $417 30%OFF $647

Water Softeners Bimatic Series

View Dr van Niekerk`s presentation

GW 031A - GULIWER Electronics

Temptrol™

SE 607 - Galvin Engineering