Ideal Tech Estrusori ID15 mini ING.indd
Transcription
Ideal Tech Estrusori ID15 mini ING.indd
EXTRUDERS ID MINI - VERSION 15 The new line of Extruders ID 15 Mini has been designed in order to satisfy the necessity to apply small quantities of plastic materials hard to process. Adhesives like polyamide and polyester are a tipical example: they tend to oxidize in contact with oxygen, changing the cohesion and viscosity of the product. Mini Extruders are particularly suitable for little laboratory productions and nowadays they are considered a “must” on the market, especially for obtaining optimal production conditions, ensuring high and constant quality of the product. Information present in this Brochure are completly demonstrative. For further details ask to the Headquarter. Ideal Tech Estrusori ID15 mini ING.indd 1 28/04/2010 18.36.48 STRONG POINTS The Extruders ID 15 Mini make the difference thanks for their flexibility and high performances; they are the best solution for adapting the own manufacture process to the various productive purposes. Benefits can be offered are certainly considerable: 1) High Wear Endurance. 2) Rapid Heating Capacità. 3) Reduction of the adhesive’s thermal shock. 4) No oxidation, thanks to a “Close System”, which does not allow the contact between air and adhesive. 5) Possibility to use different geometries of the extruder screw. 6) Fast and safe change of the extrusion conditions. 7) Rapid and easy cleaning. OPTIONAL In addition, the Extruders ID 15 Mini supply: 1) Water cooling System. 2) Dosage Station provided with one or two pumps, starting up by means of CA Motors, controlled by vector inverter. 3) High-precision control System of the pressure/basis weight of the output product. TECHNICAL DETAILS Operating Temperature: from 20 to 250° C, in relation to the application Temperature control System: PID Control System Working Pressure: from 0 to 100 bar, in relation to the application Electrical Connection: 400 VAC, Three-phase + N + PE - 50/60 Hz Standard Absorbed Power: in relation to the type of extruder Melting Rate: 1-20 Kg/h, in relation to the extrusion screw typology Cooling Zones: Cooling of the granules feeding zone in the screw Supplementary Cooling of the screw (optional) Heating Zones: Extruder - 2 Hoses and 2 Guns (optional) Ideal Tech Estrusori ID15 mini ING.indd 2 Via Sondrio 11 - 20039 Varedo (MB) - Italy tel. +39 0362 543041 - fax +39 0362 576460 www.idealtech.it e-mail: [email protected] 28/04/2010 18.36.50