granulato

PRIMO
SHELL PLAIN
ZIRCON
ROCIO VERDE ELECTRA
SABBIA
EMPIRA
IMPERIAL
PIETRA
MYSTIC BLACK
ERBA
OPAL
GRANULATO
KRIPTON
ROUGH
BLANCO
FIRMA
AESTRO
KALLIS BIANCA
RHYOLITE
KRIA
PETIT
SQUARE
COTTO
PAVIT PAVICRETE CLADIT TERRENE GRANIT
www.pavits.com
MC-4/02/12
ARORIO
BEIGE
COLORADO
MORION
KRIA
CUPRA
PERIDOT
RAMP
KRIPTON
POLVO
ROSSO
NEGRO AZUL
AURIUMDORADO
FLEMI
ALABASTER
CARNE
RUBY
SMOKY QUARTZ
ALPS
INGRESS STRADA PUMICE
REVERSE SQUARE
EMPIRA
PLAIN SURFACE ESOTICA
Vision
To establish facilities to provide 24X7, 360
degree customer care in flooring & wall covering
products by developing serviceable
infrastructure of branches in all “A” class cities ,
employees in all “B” class towns and one active
channel partner in 500 revenue districts in India.
To bring the best & latest of the products &
services from all over the world to Indian
customers and exporting the best of Indian
produce all over the world.
To implement best clean & green practices
aimed at sustenance of the resources to the
delight of all the stake holders.
To provide high quality design solutions,
technical assistance as a service to attain
customer delight.
Corporate Profile
Mission
Striving for the customer delight by providing
value added solutions for beautification of the
living spaces, and the betterment of quality of
life without increasing the carbon foot print in
flooring, wall covering materials worldwide,
while being responsive & responsible to all the
stake holders.
Pavit Ceramics Pvt. Limited, a unit of VPJ group,
is established by the veterans in ceramic field to
manufacture Vitrified tiles for exterior & interior
applications under the brand “PAVIT”, thus
being the pioneers in this line. Equipped with
the state of the art production facilities having
an annual capacity to produce 2.8 million Sq.
metres in ISO 9001:2008 certified systems
environment, the company had a steady growth
which was accelerated in leaps and bounds
augmenting various new vitrified concepts
along the way which are showcased in the
coming pages.
All the brands from PCPL stable enjoy the
patronage of the best in the building Industry &
the best of the architects. PCPL has pan Indian
presence with well structured channel
management handled by efficient field staff. The
approvals in major prestigious organizations
both in public, private & Government sectors
like MES, Renaults, Ashok Leyland, TATA motors,
TATA housing, Infosys, DLF etc has given the
impetus for the best of the organic growth.
Naturally the future belongs to PAVIT.
Expect new ideas from us.
PAVIT- the vitrified exterior unrectified tile concept
that inspires the creative mind to augur for the
scapes, be it land or lower deck of the house! PAVIT
pioneered the technology of making small format
vitrified tiles for the first time in India. The
unrectified product is presented in three
interesting sizes, fourteen fantabulous colors with
a single finish in a range of thickness designed to
take various application!!! One of the size is in
rectangular shape providing interesting
combinations of square and rectangle. Apart from
this unrectified models, GRANULATO range is
presented in two rectified sizes and six colors
which are known world over as salt & pepper
series. The total range is now presented in the
coming pages for you to appreciate.
The application areas are driveways, parking bays,
walk ways, garages, balconies, roof tops,
swimming pool sides & corridors, lift fascia, bays
and to the places wherever your imagination takes
you in the inspired way.
Granulato
Size: 400 x 400 mm (Rectified) Thickness: 9 mm
EARTHEN
Sabbia
Arorio
DECOR
Rocio Verde
EXOTIC
Negro Azul
EARTHEN-Sabbia & Polvo (400 x 400 mm)
www.pavits.com
Carne
Polvo
Granulato
Size: 300 x 300 mm (Rectified) Thickness: 10 mm
EARTHEN
Sabbia
Arorio
DECOR
Rocio Verde
EXOTIC
Negro Azul
EARTHEN-Polvo & DECOR-Carne ( 300 x 300 mm)
www.pavits.com
Carne
Polvo
Plain Surface
Size: 200 x 200 mm (Unrectified) Thickness: 10, 12*, 15* mm
EARTHEN
E102WP
E116WDB
E121W
E151WC
D173W
D163WP
D144W
X191
X194WP
E193
DECOR
D123W
EXOTIC
X126WP
*Note: Custom made thickness M.O.Q. 500 sq.mts.
EARTHEN-E121W & EXOTIC-X191( 200 x 200 mm)
www.pavits.com
Plain Surface
Size: 100 x 100 mm (Unrectified) Thickness: 12, 16 mm
EARTHEN
E102WP
E116WDB
E121W
E151WC
D173W
D163WP
D144W
X191
X194WP
E193
DECOR
D123W
EXOTIC
X126WP
RAMP (Thickness: 16 mm)
E121W
DECOR-D123W & EXOTIC-X194WP ( 100 x 100 mm)
www.pavits.com
E193
Plain Surface
Size: 210 x 100 mm (Unrectified) Thickness: 12 mm
EARTHEN *
E102WP
E116WDB
E151WC
E181
E193
LAYING PATTERNS
D163WP, E102WP (210 x 100 mm, 100 x 100 mm)
E151WC (210 x 100 mm) & E193 (100 x 100 mm)
E121W (210 x 100 mm) & E181 (100 x 100 mm)
*Note: Decor & Exotic shall be customized production & strictly against specific order of 500 sq.mts. and above.
EARTHEN-E116WDB (210 x 100 mm) & EARTHEN-E181 (100 x 100 mm)
www.pavits.com
Recommended fixing methods
Pavit
Before fixing the tiles, lay them out in the desired pattern and make sure that they give an acceptable blend of colors and design.
Also make sure that the tiles are acceptable to your satisfaction. Please note that certain amount of shade & size variation is
inherent in all vitrified products and the company will bear no liability after the tiles are fixed for fixing vitreous tiles, we recommend
the use f tiles fixing adhesives, for best results; follow the fixing instructions provided by the adhesive manufacturers, However we
are recommending the general procedure of fixing the tiles with cement applicable for low to medium heights. When the adhesives
are used, please substitute the word CEMENT with ADHESIVE in the guidelines under the title LAYING METHOD.
Horizontal - Floor applications
Substrate preparation
1. The ground should be compacted properly by ramming
and applying water on it as per the standard practice to
create a firm base. Ensure that there is no settlement of
base. Also ensure the natural slope for drainage.
2. For low pedestrian Traffic, on this base apply 4” to 6” thick
BBCC (Brick Bats Cement Concrete).
3. For Medium Traffic Floor, on the BBCC base, make 3” thick
pcc (Plain cement concrete) in 1:3:6.
4. for heavy duty traffic, make 4” thick RCC (Reinforced
Cement Concrete) in 1:2:4. The RCC should be laid such a
way that the proper line and level is attained.
Laying methods
1. Prepare base mortar by mixing sand and cement in 4:1
proportions.
2. Lay the mortar on the substrate prepared as mentioned
above in required line and level. It should be noted that in
any case the bed mortar thickness should be more than 1”
thickness.
3. Mark the centerline and fix the tiles on all the corners and
center in the required level. Preferably, start fixing tiles
parallel to longer span.
4. Prepare thick cement paste by mixing water & cement.
Apply this paste on the backside of the tile to fix it.
5. fixing of tile has to be done with minimum gap of 8mm. We
do not recommend tiles to be laid without gap (to provide
for expansion due to sun light/heat).
6. Lay the tiles on this firm base and ram lightly with the help
of rubber hammer or trowel from top. See that the tile top
surface is laid in required line and level with proper joint
gap.
7. Utmost care should be taken while fixing other tiles in
terms of matching lines and keeping exact joint width
between tiles. (For maintaining joint width spacers are
recommended of required joint thickness).
Vertical - Wall applications
Substrate preparation
1. The wall has to be plastered in line, level and plumb with
1:4 of cement and sand mortar in thickness of minimum 12
mm.
2. the surface should be rough and in perfect line, level and
plumb.
3. Allow the surface t settle for minimum 72 hours and cure
with water to avoid any hair line cracks and hollows from
inside.
4. Also, there should not be any leakage of water or drainage
pipes, which will render the adhesives to poor
performance.
Laying methods
1. Use cement and sand mortar in the ratio of 1:3 proportions
for interior and 1:4 proportions for exterior applications.
2. Prepare thick cement paste by mixing water & cement.
Apply this paste on the backside of the tile to fix it.
3. Mark the level at a height of 3’-0” from the bottom of the
wall and draw a horizontal line.
4. Prepare the mortar of any good brand of tile fixing
adhesive as per the method suggest by adhesive
manufacturer.
5. Apply the mortar on the wall with the help of notched
trowel. (The width of notch will be recommended by the
adhesive manufacturer).
6. Fixing of tile has to be done with minimum gap of 5 mm to
15 mm. We do not recommend tiles to be laid without gap.
7. Fix the tiles on the marked line to level and ram it properly
with the help of hammer or rubber trowel so that it gets
fixed properly.
8. utmost care has to be taken while fixing other tiles. The
joint gap and line has to be maintained while fixing other
tiles.
9. It is recommended to use gap rod of required thickness
and string for maintaining line.
Joint filling-grouting
1. allow the tiles to properly set and cured, for 24 hours, then fill the joint gaps with any well-known joint filler. Prepare the
consistent paste as per the method instructed by the joint filler manufacturer. Fill the joint with the help of rubber trowel. Before
grouting, all the joints should be free from any dust and impurities.
2. For filling the joints, keep the filler paste on the tiles and fill the gaps by spreading it in the space between the tiles with the help of
rubber trowel in such a way that the entire area of joint gaps are filled with the joint filler paste. Apply light pressure of finger in
such a way that it creates ‘U’ shape between two consecutive tiles and works as a small channel to pass water through it.
3. Remove the excess material from the tile surface before the setting time of joint filler recommended by the supplier with the help
of rubber trowel.
Clearing
1. Clean the surface with the help of a wet sponge immediately before setting time of joint fillers.
2. After 24 hours of applying of joint filler, wash the surface with water and if required use any available mild detergent to remove
dirt from ties.
3. It is recommended not to use the laid tiles before 48 hours of fixing and/or before 24 hours of filling of joint.
These are recommended methods of laying as per international Norms published in good faith. Any liability due to non adherence of these norms by the
contractor / mason and the resultant non conformance / performance is not assumed or imposed on the manufacturer i.e. PCPL.
The wall cladding/flooring is a composite of the quality of substrate, adhesive or cement, workmanship, ambient conditions, available time etc, besides the tile
quality. So any inconsistency with the expected performance or looks of this composite may reflect on the tile. Such inference has to be validated before lodging
any claim on the manufacturer.
Note: The colors of vitrified products and those of printing inks do not match exactly therefore, color selection may be done from actual products. All
dimensions are in millimeter (nominal) and are subject to change without notice.
Technical Specification
Characteristics
Standards
Pavit Value
100 x 100 mm
200 x 100 mm
210 x 100 mm
Pavit Value
Rectified
300 x 300 mm
Deviation length / width
+ 2.5% (IS-4457)
+ 2%
+ 0.2%
Thickness
+ 5..0% (ISO-10545-2)
+ 4.0%
+ 4.0%
Water absorption
< 2 % (IS-4457 )
< 0.5 %
< 0.5 %
MOH’s hardness
Min 6 (EN 101)
8
8
Breaking strength
1300 N (ISO-10545-4)
> 1300 N
< 1300 N
Modules of rupture
35 N (IS-4457 : 2007)
> 35
> 35
Deep abrasion resistance
Max 175 mm (ISO-10545-6)
> 160 mm3
> 160 mm
Acid resistance
< 1.5% (IS 4457 : 2007)
> 0.5%
> 0.5%
Skid resistance **
> 0.4 (ASTM C - 1028)
> 0.6*
> 0.6*
Stain resistance
Resistance (ISO - 10545-14)
Resistant
Resistant
Moisture expansion
NIL (ISO-10545-10)
NIL
NIL
Frost resistance**
Resistance (ISO-10545-12)
Resistant
Resistant
Density
2.2 gm/cc (DIN 51082)
>2.36
>2.36
Colour resistance to light**
No visible damage (ISO-10545-16)
No visible damage
No visible damage
Linear thermal expansion**
< 9x10 (ISO-10545-8)
< 6.0 x 10
< 6.0 x 10
Thermal shock resistance**
No damage (ISO-10545-9)
No damage
No damage
Straightness of sides
+ 0.5% (ISO-10545-2))
-------
+ 0.2%
Surface flatness
+ 0.5% (ISO-10545-2))
-------
+ 0.2%
Rectangularity
+ 0.6% (ISO-10545-2))
-------
+ 0.2%
3
3
-6
-6
-6
* The declared results in this table are as per the PCPL lab from the particular batch. The values are indicative in nature and purchaser may ask
for MTR of their supply. In such case charges for testing will be levied on the purchasing party.
** All these tests apply for overseas customers but may not be relevant in Indian context.
Packing Details
Type
Size in mm
Thickness
Pc/Box
Coverage area
Square Meters
Wt./Box
in Kgs.(Appr.)
PAVIT - Granulato
PAVIT - Granulato
400 x 400 mm
300 x 300 mm
9 mm
10 mm
6
10
0.96
0.90
19.50
19.70
PAVIT - Plain Surface
PAVIT - Plain Surface
PAVIT - Plain Surface
PAVIT - Plain Surface
200 x 200 mm
200 x 200 mm
200 x 200 mm
210 x 100 mm
10 mm
12 mm
15 mm
12 mm
20
16
13
40
0.80
0.64
0.52
0.84
17.40
17.40
17.40
21.00
PAVIT - Plain Surface
PAVIT - Plain Surface
100 x 100 mm
100 x 100 mm
12 mm
16 mm
80
60
0.80
0.60
20.00
20.00
www.pavits.com
303, Camps Corner-II, Near Prahladnagar Garden, Satellite, Ahmedabad-380015, INDIA.
Ph : +91 79 40266000, Fax : +91 79 40266099, [email protected], www.pavits.com
Mumbai Office:
No-23/24, Keshav Kunj, Sector-30,
Vashi, Navi Mumbai-400703,
Maharastra. INDIA
Ph : +91 22 32939373
There may be a difference in the colors, please see the actual tiles before taking a decision on colors • Size/Shade variation is inherent property of all
vitrified tile and is not be construed as manufacturing defect • It is highly recommended to keep min 8mm gap between the tile while fixing • It is advised
to see the dry run of the tiles before fixing the tiles. No claims of what so ever are entertained after fixing of the tiles as per the International norms.
New Delhi Office:
254 A/1, T.K. House, 2nd Floor,
Press Enclave Road, Opp. Max Hospital,
Saket, New Delhi-110017. INDIA
Ph : +91 11 26682376
Pune Office:
B-118, 1st Floor, Kumar Business Court,
Above Thatbath, Mukund Nagar,
Pune-411037. INDIA
Ph : +91 20 32318159
NORTH ZONE: Delhi 09313040001, 09313455310 / Punjab 09356710767, 09356712715 / Rajasthan 09314928574 / Uttar Pradesh
09335260231 WEST ZONE: Gujarat 09327071856, 09375925185 / Madhya Pradesh 09301717908 / Mumbai 09323089665,
09323598641 / R.O. Maharashtra & Goa 09325336331, 09370865529 / Kolhapur 09370865529 / Nagpur 09325336331, 09326342442
EAST ZONE: West Bengal, Orissa & NE States 09339288846, 09330021022 SOUTH ZONE: Andhra pradesh 09347784111 / Karnataka
07483114804 / Tamil Nadu 09382555038, 09382183954 / Kerala 09349090005, 09387839042