User Manual - Manfred+Cracco

Transcription

User Manual - Manfred+Cracco
/ ManfredCracco
USER MANUAL
USER MANUAL
This
is our way
1. Product specifications
2. Maintenance
3. Instructions
A. Setting the time
B. Change watch straps
- Mesh
- Classic
- Patterns
- Stick through
1. Product specifications
RONDA SWISS ANALOG
QUARTZ MOVEMENT
LinePowertech
Caliber 762E
Size 6¾ x 8’’’
Case pin hole
Dial
Minute hand
Hour hand
Crown
Case
Case pin hole
2. Maintenance
Watch maintenance
Strap maintenance
Like any object, your watch is negatively
affected by dust, perfume, perspiration,
pool and sea water. Salt crystals from the
skin could attack the metal of the case and
the band, the crown and leather strap.
We recommend that you clean your watch
with a slightly damp, soft cloth. The metal
and the gold plating will retain their original
colour and lustre longer.
Our leather straps are manufactured of
quality materials, so we recommend to
handle them with care! You can clean
the leather using a leather care product,
but please test the product on a small
part of the leather to make sure there’s
no adverse reaction and read the label
instructions carefully. Don’t use chemical
products on the material.
Metal bands on watches with a minimum
water resistance of 5 atm can be washed
with cold water and a mild soap.
Limit the exposure of the leather
straps to heat, direct sunlight or damp
environments. Note that color transfer
can occur when using the product.
Make sure that the crown is always pushed
into place when cleaning your watch,
and that the crystal is in good condition
before making any contact with water.
Never use hot water. Have a professional
watch-repair service replace the battery.
A professional watch maker knows how to
check the gaskets and how to replace them,
if necessary. Always explicitly ask to check
the water resistance, to make sure your watch
remains water resistant and to keep the
warranty after a battery replacement or repair.
3. Instructions
A. Setting the time
When wearing the watch, the crown is in
position 0. In this position the crown has
no alteration function. This is to prevent
any unintentional alterations.
Crown
Crown
Crown position 0
Crown position 1
0
Setting the date
1. Take off the watch
2. Gently pull out the crown to position 1 until you hear a soft click
3. In this position the crown stops the time and the time can be set exactly
4. Turn the crown to adjust the hour and minute hands
5. Gently push down the crown down to the 0 position
1
3. Instructions
B. Change Watch Strap
Carefully read the instructions below.
PUSH-PIN
TOP
M E S H WAT C H S T R A P S
THE PUSH-PIN PEN
Each mesh watch strap consist of 2 parts
which are attached to the case, each by
a metal spring bar.
PUSH-PIN
BOTTOM
Upper strap
Upper spring bar
Upper Case pin hole
Bottom spring bar
Bottom Case pin hole
Bottom strap
Buckle
RELEASE
GENTLY PRESS THE PUSH-PIN
UNTIL THE SPRING BARS POP OUT
REPEAT THIS PROCESS
FOR THE BOTTOM STRAP
UNTIL FINISHED
CHANGE
GENTLY PRESS THE LEFT SIDE IN THE
LEFT PIN HOLE OPENING OF THE CASE
REPEAT THIS PROCESS
FOR THE BOTTOM STRAP
UNTIL FINISHED
USE THE PUSH-PIN BOTTOM AND
PLACE IT OVER THE RIGHT SIDE
OF THE SPRING BAR
Remarks:
The springbar is a tiny metal bar which can pop out and jump off when using too much force.
Keep the spring bars in a box or plastic pack in order to contain them safely (for loss) and not cause damage.
The Mesh
3. Instructions
B. Change Watch Strap
C L A S S I C WAT C H S T R A P S
Each classic watch strap consist of 2 parts
which are attached to the case, each by a
metal spring bar.
THE PUSH-PIN PEN
PUSH-PIN
TOP
Carefully read the instructions below.
PUSH-PIN
BOTTOM
Buckle
Loop
Upper Strap
Upper Case
Upper Spring Bar
pin hole
Bottom Case
Bottom Spring Bar
pin hole
Bottom Strap
RELEASE
GENTLY PRESS THE PUSH-PIN
UNTIL THE SPRING BARS POP OUT
REPEAT THIS PROCESS
FOR THE BOTTOM STRAP
UNTIL FINISHED
The Classic
CHANGE
GENTLY PRESS THE LEFT SIDE IN THE
LEFT PIN HOLE OPENING OF THE CASE
USE THE PUSH-PIN BOTTOM AND
PLACE IT OVER THE RIGHT SIDE
OF THE SPRING BAR
GENTLY PRESS THE SPRINGBAR DOWN
AND MANEUVER IT INTO THE SECOND
PIN HOLE OF THE CASE
REPEAT THIS PROCESS
FOR THE BOTTOM STRAP
UNTIL FINISHED
The Classic
3. Instructions
B. Change Watch Strap
Carefully read the instructions below.
P AT T E R N S WAT C H S T R A P S
Each pattern strap consists of 2 parts.
Buckle
Loop
Upper Strap
Upper Case
Upper Spring Bar
pin holes
Bottom Case
Bottom Spring Bar
pin holes
Bottom Strap
RELEASE TO LOCK STRAP IN PLACE
GENTLY PUSH INWARD TO RELEASE THE STRAP
GENTLY PUSH INWARD WHILE POSITIONING STRAP
RELEASE
CHANGE
POSITION STRAP
PERFECTLY IN
LINE WITH PIN
HOLES ON BOTH
SIDES OF THE
WATCH CASE
The Pattern
3. Instructions
B. Change Watch Strap
Carefully read the instructions below.
S T I C K T H R O U G H WAT C H S T R A P S
The easy to convert strap that you
can personalise within a heartbeat.
Buckle
Loop 1
Loop 2
Strap
Upper Spring Bar
Case
Bottom Spring Bar
S T I C K T H R O U G H WAT C H S T R A P S
CLOSE THE STICK TROUGH STRAP
T H E R E I S A S P E C I A L WAY TO W E A R
O U R S T R A P S . S O F O L LO W T H E N E X T
I N S T R U C T I O N S TO R E C E I V E T H E
U LT I M AT E M A N F R E D + C R AC C O LO O K .
1. Put the strap around your wrist
—
2. Then put the end of the strap
through the first loop.
—
3. Next you put the strap over
the second loop and fold the end
in such a way that the straps folds
back. Put the folded part through
the second loop and push firmly. 
—
4. Now you are ready to concur the world on your own unique way!
1.
2.
3.
4.
All our watches are combinable with
easy convertible straps to suit everyone’s mood, outfit or occasion. Simply
choose your favorite Manfred+Cracco
and spice it up to make it your own.
Our monochrome colored straps
are chosen with respect for the
upcoming color trends and fit our
modern classic watch designs perfectly.
Mix & match
to suit
your mood
Whether you want to go for classic
black or make a statement with a bold
color. We got it! Want to take it to the
next level? Take a look at our patterns:
our bold printed leather straps give
your outfit an immediate extra
dimension.
Contact
If you have any extra questions regarding our service guidelines,
please contact our customer service team: [email protected]
or send your question directly via our contact page.