Sunbeam - Le système de fixation PV professionnel

THE PROFESSIONAL PV MOUNTING SYSTEM
Sunbeam Nova
Sunbeam presents Nova: a brand new mounting solution for solar panels on flat roofs.
Its clever design and stable construction enable ultrafast installation of the optimised and
secure support system.
Advantages have been kept
The quality of our products, combined with our excellent customer service,
has made SUNBEAM one of the most popular manufacturers of mounting
solutions for solar panels on flat roofs.
It goes without saying that many of the outstanding features our customers
value have been retained in the new system. As before, the precious solar
panels are supported along their entire length, and all structural parts are
New
SUNBEAM Nova consists of roll-formed beams with
stainless steel and aluminium brackets. The HDPE feet
guarantee efficient drainage.
metal. The plastic feet have been kept too, but a new design allows them to be
simply clicked in place underneath the base units.
Details have been improved
At the same time the new system has several improvements that every
professional will appreciate:
• universal end clamps that can be used with any panel frame thickness
• flexible distance between rows
A unique stepless adjustable measuring rod allowing rapid
and precise placement and assembly of the base units.
• installation requires only a single tool
• smaller transport size
• less ballast needed
Not unimportant in the light of today’s competitive landscape: the system price
is significantly lower than before.
The result is the ultimate mounting system for flat roofs that can be deployed
in any conceivable situation.
The new ballast racks are suitable for various standard tiles
as well as for gravel.
For every situation a solution
SUNBEAM Nova is available in the following two models:
•SUNBEAM Nova Universal is used for south-facing solar panels. A panel angle of 12 degrees and a
flexible distance between rows of 1300, 1500 or 1700 mm allows for an optimised system in any
deployment.
•SUNBEAM Nova Symmetrical is a symmetrical (“east-west”) system, with two solar panels per
position, each at an angle of 10 degrees. This results in an even better roof utilisation (kWp/m2) and a
maximum yield (kWh/y) per roof, at a lower cost and with a shorter installation time per module.
Nova Universal
Nova Symmetrical
module angle
12 degrees, south-facing
2 x 10 degrees, no dependence on direction
distance between rows
1300, 1500 or 1700 mm
2100 or 2300 mm
typical roof utilisation
33, 22 or 16 degrees
116, 100 or 89 Wp per m
2
materials used
(depending on row pitch)
9 or 7 degrees
(at 250 Wp per module)
143 or 132 Wp per m2
Zn/Al/Mg coated steel (‘Magnelis’), stainless steel, aluminium, plastic (HDPE)
compatible roof types
any flat roof with tar paper, gravel, film (PVC, EPDM etc.); maximum angle 3 degrees
compatible modules
virtually any brand, model, size and type of solar panel
roof load
project-specific, determined according to Eurocode 1; typically between 10 and 20 kg/m2
warranty
10 years on the structure
1300 - 1700 mm
2100 / 2300 mm
10º
ca 320 mm
10º
12º
module + 10 mm
module + 10 mm
WARRANTY
COMPANY INFORMATION
If installed according to the installation instructions,
Manufacturer
Sunbeam BV
P.C. Staalweg 60
NL-3721 TJ Bilthoven
The Netherlands
the SUNBEAM Nova system is certified to withstand
wind and snow loads as defined in the Eurocode.
The standard warranty period is 10 years.
“SUNBEAM” is a registered trademark. The SUNBEAM concept and
design are protected by several international patents.
[email protected]
www.sunbeam-pv.com
ca 300 mm
SUNEBAM Nova product sheet — 16 december 2015
shading angle