Unique operating mechanism for accurate load

Tekno
Lite-Lift® Operating System
SunProject Shading System Feature Lite-Lift® a smooth state of the art easy lift activated mechanism.
• Lite-Lift® provides a smooth constant effortless lift of medium to large shades with finger tip control.
• Lite-Lift® mechanism effortless lift alleviates stress on the chain and avoids chain breakage (Major cause of maintenance
associated with chain operated shades).
• Shade can be pulled down by the bottom bar (without stripping or damaging the mechanism) without having to pull from the chain.
• Shade mechanism cannot be stripped or damaged!
• Virtually lasts forever. Durable — Heavy use design, important in commercial applications where products are in some cases abused.
Interchangeable idle end
Diverse coil option for superior lift
Unique operating mechanism for
accurate load calibration.
Chain with adjustable chain
stopper for safe and precise
positioning
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
1
TM
TM
Tekno
CHAIN OPERATED ROLLER SYSTEMS
TM
TEKNO®® LITE-L
TEKNO® LITE-L
TEKNO LITE-L
Lite-Lift® Chain Operated Roller Systems
CHAIN OPERATED ROLLER SYSTEMS
CHAIN OPERATED ROLLER SYSTEMS
TEKNO®
TEKNO® ®
LITE-LIFT
TEKNO® ®
LITE-LIFT
OPEN ROLL
TR
®
LITE-LIFT
OPEN
ROLL TR
WITH SHADE
HOLDER
OPEN
ROLL
TR
WITH SHADE HOLDER
WITH SHADE HOLDER
Tekno® Lite-Lift®
Open Roll TR
With Shade Holder
TEKNO®
TEKNO® ®
LITE-LIFT
TEKNO® ®
LITE-LIFT
WITH CASSETTE
70
®
LITE-LIFT
WITH CASSETTE 70
WITH CASSETTE 70
Tekno® Lite-Lift®
With Cassette 70
TEKNO®
TEKNO® ®
LITE-LIFT
TEKNO® ®
LITE-LIFT
WITH CASSETTE
95/125
®
LITE-LIFT
WITH CASSETTE 95/125
WITH CASSETTE 95/125
Tekno® Lite-Lift®
With Cassette 95/125
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
2
TM
Tekno
TM
TM
®
TEKNO
LITE-LIFT
TEKNO
TEKNO®®LITE-LIFT
LITE-LIFT
Lite-Lift® Chain Operated Roller Systems
CHAIN
OPERATED
CHAIN
OPERATEDROLLER
ROLLERSYSTEMS
SYSTEMS
CHAIN
OPERATED
ROLLER
SYSTEMS
®
®
TEKNO
TEKNO®
LITE-LIFT
LITE-LIFT®®®
LITE-LIFT
WITH
CASSETTE
70
WITH CASSETTE
CASSETTE70
70
CHANNELS
T-440
AND
CHANNELS
T-440
AND CHANNELS T-440
Tekno® Lite-Lift®
With Cassette 70
and Channels T-440
®
TEKNO
®
TEKNO
TEKNO® ®
LITE-LIFT ®
LITE-LIFT
®
LITE-LIFT
WITH CASSETTE
95
WITH
CASSETTE
95
WITH
CASSETTET-460
95
AND CHANNELS
AND
CHANNELS
T-460
AND CHANNELS T-460
Tekno® Lite-Lift®
With Cassette 95
and Channels T-460
TEKNO®
®
TEKNO
®®
TEKNO
LITE-LIFT
®
WITH CASSETTE
125
LITE-LIFT
LITE-LIFT®
AND CHANNELS T-460/T-480
WITH
WITH CASSETTE
CASSETTE 125
125
AND
CHANNELS
T-460/T-480
AND CHANNELS T-460/T-480
Tekno® Lite-Lift®
With Cassette 125
and Channels T-460/T-480
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
3
TM
TM
Tekno
TM
TEKNO®® LITE-LIFT®® TANDEM
TEKNO
TEKNO® LITE-LIFT
LITE-LIFT® TANDEM
TANDEM
CHAIN OPERATED ROLLER SYSTEMS
CHAIN
CHAIN OPERATED
OPERATED ROLLER
ROLLER SYSTEMS
SYSTEMS
Lite-Lift® Tandem Chain Operated Roller Systems
TEKNO®®
TEKNO
®
TEKNO
LITE-LIFT®, TANDEM
®
LITE-LIFT
®, TANDEM
OPEN
ROLL
TR
LITE-LIFT
, TANDEM
OPEN
TR
SHADE
HOLDER
OPEN ROLL
ROLL
TR - NOT
SHADE
AVAILABLE
SHADE HOLDER
HOLDER -- NOT
NOT
AVAILABLE
AVAILABLE
Tekno® Lite-Lift® Tandem
Open Roll TR
Shade Holder — Not Available
TEKNO®®
TEKNO
TEKNO® ®, TANDEM
LITE-LIFT
®
LITE-LIFT
®, TANDEM
WITH
CASSETTE
95/125
LITE-LIFT
, TANDEM
WITH
WITH CASSETTE
CASSETTE 95/125
95/125
Tekno® Lite-Lift® Tandem
With Cassette 95/125
TEKNO®®
TEKNO
TEKNO® ®, TANDEM
LITE-LIFT
®
LITE-LIFT
®, TANDEM
WITH
CASSETTE
95/125
LITE-LIFT
, TANDEM
WITH
CASSETTE
95/125
AND
WITHCHANNELS
CASSETTE T-460
95/125
AND
CHANNELS
T-460
AND CHANNELS T-460
Tekno® Lite-Lift® Tandem
With Cassette 95/125
and Channels T-460
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
4
Tekno
Bracket and Cassette Details
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
5
Tekno
Lite-Lift® Tandem
Chain Operated Roller System
Side
Channel
Type
T-440
T-460
T-480
T-3
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
6
Tekno
Elektra Motorized Options
Elektra offers the following motorized options for the Tekno® Roller Systems:
Open Roll HP, Cassette 95 and 125.
• Elektra 24V/DC is low voltage motorized roller system.
— Cost effective, can be easily interfaced with any centralized home automation system and sleek for small to medium sized windows
— Available in remote control, individual and group controls, and an array of decorative switches
• Elektra 120V/AC is a line voltage motorized roller system for medium to large windows in available options:
— 120V/AC features our easy “Quick Connect” plugs allow for easy pre-wiring by electrician. Available in remote control, individual and group
controls, and an array of decorative switches
— 120V/AC RTS plug-in unit comes with an AC Plug and can be plugged into any wall outlet
• Eliminates problems of integration and installation specific to the wiring
• Comprehensive range of radio control using remote controls switches, timers and integration controls are available
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
7
TM
TM
TEKNO® ELEKTRA 24V/
TEKNO®® ELEKTRA 24V/
TEKNO ELEKTRA 24V/
Tekno
24V/DC MOTOR OPERATED ROLLER SYSTEMS
TM
Elektra 24V/DC
24V/DC Motor Operated Roller Systems
24V/DC MOTOR OPERATED ROLLER SYSTEMS
24V/DC MOTOR OPERATED ROLLER SYSTEMS
TEKNO®
TEKNO®® 24V/DC
ELEKTRA,
TEKNO
OPEN
ROLL
TR
ELEKTRA,
24V/DC
ELEKTRA,
24V/DC
WITH
HOLDER
OPENSHADE
ROLL
TR
OPEN
ROLL TR
WITH SHADE
HOLDER
WITH SHADE HOLDER
Tekno® Elektra
24V/DC
Open Roll TR
With Shade Holder
TEKNO®
®
TEKNO
ELEKTRA,
TEKNO® 24V/DC
WITH
CASSETTE
ELEKTRA,
24V/DC95
ELEKTRA,
24V/DC95
WITH CASSETTE
WITH CASSETTE 95
Tekno® Elektra
24V/DC
With Cassette 95
TEKNO®
®
TEKNO
ELEKTRA,
TEKNO® 24V/DC
WITH
CASSETTE
ELEKTRA,
24V/DC95
ELEKTRA,
24V/DCT-460
AND
WITHCHANNELS
CASSETTE
95
WITH
CASSETTE T-460
95
AND
Elektra
TeknoCHANNELS
AND
CHANNELS T-460
24V/DC
®
With Cassette 95
and Channels T-460
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
8
TEKNO® ELEKTRA 120V
TEKNO® ELEKTRA 120V
®
TEKNO
ELEKTRA 120V
120V/AC MOTOR OPERATED ROLLER SYSTEMS
TM
TM
Tekno
TM
120V/AC MOTOR OPERATED ROLLER SYSTEMS
120V/AC MOTOR OPERATED ROLLER SYSTEMS
TEKNO®
TEKNO®
ELEKTRA,
120V/AC
®
TEKNO
ELEKTRA,
120V/AC
OPEN ROLL
HP
Elektra 120V/AC
120V/AC Motor Operated Roller Systems
OPEN
ROLL
HP
WITH SHADE
HOLDER
ELEKTRA,
120V/AC
WITH SHADE
HOLDER
OPEN
ROLL HP
Tekno Elektra
-400,
500
WITH
SHADE
HOLDER
120V/AC
-400,
500
-500 RTS
Open Roll TR
-500
RTS
-400,
500
With Shade
Holder
— 400,RTS
500
-500
®
— 500 RTS
TEKNO®
TEKNO®
ELEKTRA,
120V/AC
®
TEKNO
ELEKTRA,
120V/AC
WITH CASSETTE
95/125
WITH CASSETTE
95/125
ELEKTRA,
120V/AC
-400, CASSETTE
500
WITH
95/125
Tekno Elektra
-400,
500
-500
RTS
120V/AC
-500
RTS
-400,
50095/125
With Cassette
— 400,RTS
500
-500
®
— 500 RTS
TEKNO®
TEKNO®
ELEKTRA,
120V/AC
®
TEKNO
ELEKTRA,
120V/AC
WITH CASSETTE
95/125
Tekno Elektra
WITH
CASSETTE
95/125
AND
CHANNELS
T-460
ELEKTRA,
120V/AC
120V/AC
AND
CHANNELS
T-460
WITH
CASSETTE
95/125
With Cassette
95/125
and Channels
T-460
-400,
500
AND
CHANNELS
T-460
—
400,
500
-400,
500
-500
RTS
— 500 RTS
-500 RTS
-400,
500
9
-500 RTS
®
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
TM
TM
TM
TEKNO®® ELEKTRA TANDEM - 120V/A
TEKNO
TEKNO®ELEKTRA
ELEKTRATANDEM
TANDEM--120V/A
120V/A
Tekno
120V/AC MOTOR OPERATED ROLLER SYSTEMS
120V/AC
120V/ACMOTOR
MOTOROPERATED
OPERATEDROLLER
ROLLERSYSTEMS
SYSTEMS
Elektra Tandem 120V/AC
120V/AC Motor Operated Roller Systems
TEKNO®®
TEKNO
®
TEKNO
ELEKTRA, TANDEM - 120V/A
ELEKTRA,
TANDEM
--120V/A
OPEN
ROLL
TR
ELEKTRA,
TANDEM
120V/A
OPEN
ROLL
TR
SHADE
HOLDER
OPEN ROLL
TR - NOT
SHADE
HOLDER
AVAILABLE
SHADE HOLDER--NOT
NOT
AVAILABLE
Tekno Elektra Tandem
AVAILABLE
®
120V/AC
-400,
500
Open Roll TR
-400,
500
-500
-400,
500Holder – Not Available
With RTS
Shade
-500
RTS
— 400,
500
-500
RTS
— 500 RTS
TEKNO®®
TEKNO
®
TEKNO
ELEKTRA, TANDEM - 120V/A
ELEKTRA,
TANDEM
--120V/A
WITH
CASSETTE
95/125
ELEKTRA,
TANDEM
120V/A
WITH
CASSETTE
95/125
WITH CASSETTE 95/125
-400, 500
-400,
500
Elektra Tandem
Tekno
-500
RTS
-400,
500
120V/AC
-500
-500RTS
RTS
®
With Cassette 95/125
— 400, 500
— 500 RTS
TEKNO®®
TEKNO
®
TEKNO
ELEKTRA, TANDEM - 120V/A
ELEKTRA,
TANDEM
--120V/A
WITH
CASSETTE
95/125
ELEKTRA,
TANDEM
120V/A
WITH
CASSETTE
95/125
Elektra Tandem T-460
Tekno
AND
CHANNELS
WITH
CASSETTE
95/125
AND
CHANNELS
T-460
120V/AC
AND
CHANNELS T-460
®
With Cassette 95/125
-400,
500
and Channels T-460
-400,
500
-500
RTS
— 400,
500
-400,
500
-500
RTS
— 500 RTS
-500
RTS
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
10
TM
TM
TM
TEKNO® ELEKTRA 120V
®
TEKNO
TEKNO® ELEKTRA
ELEKTRA 120V
120V
120V/AC MOTOR OPERATED ROLLER SYSTEMS
Tekno
120V/AC
MOTOR
OPERATED ROLLER SYSTEMS
CHANNEL
OPTIONS
120V/AC MOTOR OPERATED ROLLER SYSTEMS
CHANNEL
CHANNEL OPTIONS
OPTIONS
TEKNO®
®
TEKNO
®
TEKNO
ELEKTRA,
120V/AC
Elektra 120V/AC
120V/AC Motor Operated Roller Systems
WITH CASSETTE
ELEKTRA,
120V/AC
ELEKTRA,
120V/AC95/125
AND CHANNELS
TYPE 2
WITH
CASSETTE
WITH
CASSETTE 95/125
95/125
AND
CHANNELS
TYPE
2
AND
CHANNELS
TYPE
2
Tekno Elektra
-400,
500
120V/AC
-500
RTS
-400,
500
With Cassete
95/125
-400,
500
and Channels
-500
RTS
-500
RTStype 2
®
— 400, 500
— 500 RTS
TEKNO®
®
TEKNO
®
TEKNO
ELEKTRA,
120V/AC
WITH CASSETTE
ELEKTRA,
120V/AC
ELEKTRA,
120V/AC95/125
AND CHANNELS
TYPE 3
WITH
CASSETTE
95/125
WITH
CASSETTE
95/125
Tekno Elektra
AND
CHANNELS
AND
CHANNELS TYPE
TYPE 3
3
120V/AC
-400,
500
With Cassete 95/125
and Channels
-500
RTStype 3
-400,
500
-400,
500
— 400, 500
-500
RTS
— 500 RTS
RTS
-500
®
TEKNO®
®
TEKNO
®
TEKNO
ELEKTRA,
120V/AC
WITH CASSETTE
ELEKTRA,
120V/AC95/125
ELEKTRA,
Tekno Elektra 120V/AC
AND
CHANNELS
TYPE 4 T
WITH
CASSETTE 95/125
120V/ACCASSETTE 95/125
WITH
AND
CHANNELS
TYPE
4
T
With Cassette
95/125
AND
CHANNELS
TYPE
4
T
and Channels
Type 4 T-460
-400,
500
— 400, 500
-500
RTS
-400,
500
— 500 RTS
-400,
500
-500
-500 RTS
RTS
®
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
11
TM
TM
TM
TEKNO®® ELEKTRA TANDEM - 120V/A
TEKNO ELEKTRA TANDEM - 120V/A
TEKNO® ELEKTRA TANDEM - 120V/A
120V/AC MOTOR OPERATED ROLLER SYSTEMS
120V/AC MOTOR OPERATED ROLLER SYSTEMS
Tekno
CHANNEL OPTIONS
CHANNEL
OPTIONS
120V/AC MOTOR
OPERATED ROLLER SYSTEMS
CHANNEL OPTIONS
TEKNO®®
TEKNO
ELEKTRA,
TANDEM - 120V/A
TEKNO® TANDEM - 120V/A
ELEKTRA,
Elektra Tandem 120V/AC
120V/AC Motor Operated Roller Systems
WITH CASSETTE 95/125
WITH
CASSETTE
95/125
ELEKTRA,
TANDEM
- 120V/A
AND
CHANNELS
TYPE
2
AND
CHANNELS
TYPE
2
WITH CASSETTE 95/125
AND
CHANNELS
-400,
500
Tekno
Elektra Tandem TYPE 2
-400,
500
120V/AC
-500
RTS
-500
WithRTS
-400, Cassete
500 95/125
®
and Channels type 2
-500
RTS
— 400,
500
— 500 RTS
TEKNO®®
TEKNO
ELEKTRA,
TANDEM - 120V/A
TEKNO® TANDEM - 120V/A
ELEKTRA,
WITH CASSETTE 95/125
WITH
CASSETTE
95/125
ELEKTRA,
TANDEM
- 120V/A
AND
CHANNELS
TYPE
3
AND
CHANNELS
TYPE
3
WITH CASSETTE 95/125
Tekno® Elektra Tandem
120V/AC
With Cassete 95/125
and Channels type 3
— 400, 500
— 500 RTS
AND CHANNELS
TYPE 3
-400,
500
-400,
500
-500 RTS
-500
-400,RTS
500
-500 RTS
TEKNO®®
TEKNO
ELEKTRA,
TANDEM - 120V/A
TEKNO® TANDEM - 120V/A
ELEKTRA,
WITH CASSETTE 95/125
WITH
CASSETTE
95/125
ELEKTRA,
TANDEM
- 120V/A
AND
CHANNELS
TYPE
4 T-4
Tekno Elektra Tandem
AND
CHANNELS
TYPE
4
WITH CASSETTE 95/125 T-46
®
120V/AC
With Cassette 95/125
and Channels Type 4 T-460
— 400, 500
— 500 RTS
AND CHANNELS
TYPE 4 T-4
-400,
500
-400,
500
-500 RTS
-500
-400,RTS
500
-500 RTS
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
12
Tekno
Crank
Crank Operated Roller Systems
Manually crank operated roller shading systems are an alternative Lift system for large shades or in out of reach or irregular
areas that typically require a motorized system.
A precision gear box drive with a 1:3 ratio offers an easy and controlled lift allowing for constant and steady rolling of
the system.
A variable predetermined height 13 mm (1/2”) diameter Control Shaft connected to a universal joint supports angled
and irregular position of shades allowing for effective operation of the shade system.
A Detachable Control Shaft option is available for removal and storage of the Control Shaft. This prevents unauthorized use of
the shade system and eliminates hazards common for physically challenged patients or simply for improved visual appearance
typically with hanging chains.
A Collapsible Folding Handle allows for improved Ratio Lift of the shade system reducing strain and effort to the user.
Internal Limit Stop mechanism allows for consistent down position stop of the shade system and prevents opposite re-winding
of the fabric roller assembly preventing damageto the fabric assembly.
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
13
TEKNO® CRAN
TEKNO
TEKNO®®CRAN
CRAN
TM
TM
TM
Tekno
CRANK OPERATED ROLLER SYSTEMS
Crank
Crank Operated Roller Systems
CRANKOPERATED
OPERATEDROLLER
ROLLERSYSTEMS
SYSTEMS
CRANK
TEKNO®
TEKNO®®
TEKNO
CRANK
CRANK
CRANKROLL TR
OPEN
OPEN
OPENROLL
ROLLTR
TR
WITH
SHADE
HOLDER
WITH
WITHSHADE
SHADEHOLDER
HOLDER
Tekno® Crank
Open roll TR
With Shade Holder
TEKNO®
TEKNO®®
TEKNO
CRANK
CRANK
CRANK
WITH
CASSETTE 125
WITHCASSETTE
CASSETTE125
125
WITH
Tekno® Crank
with Cassette 125
TEKNO®
TEKNO
TEKNO®®
CRANK
CRANK
CRANK
WITH CASSETTE 125
WITH
WITH
CASSETTE125
125
AND CASSETTE
CHANNELS
T-460
AND
ANDCHANNELS
CHANNELST-460
T-460
Tekno® Crank
with Cassette 125
and Channels T-460
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
14
TEKNO®® CRA
TEKNO® CRA
TEKNO CRA
TM
TM
TM
CRANK OPERATED ROLLER SYSTEMS
Tekno
CRANK OPERATED ROLLER SYSTEMS
CHANNEL OPTIONS
CRANK
OPERATED
CHANNEL
OPTIONSROLLER SYSTEMS
CHANNEL OPTIONS
Crank
Crank Operated Roller Systems — Channel Options
TEKNO®®
TEKNO
TEKNO
CRANK®
CRANK
WITH CASSETTE 125
CRANK
WITH
CASSETTE 125
AND
CHANNELS
TYPE 2
WITH
CASSETTE TYPE
125
AND CHANNELS
2
AND CHANNELS TYPE 2
Tekno® Crank
with Cassette 125
and Channels Type 2
TEKNO®®
TEKNO
TEKNO
CRANK®
CRANK
WITH CASSETTE 125
CRANK
WITH
CASSETTE 125
AND
CHANNELS
TYPE 3
WITH
CASSETTE TYPE
125
AND CHANNELS
3
AND CHANNELS TYPE 3
Tekno® Crank
with Cassette 125
and Channels Type 3
TEKNO®®
TEKNO
TEKNO
CRANK®
CRANK
WITH CASSETTE 125
CRANK
WITH
CASSETTE 125
AND
CHANNELS
TYPE 4 TWITH
CASSETTE TYPE
125
AND CHANNELS
4 TAND
CHANNELS TYPE 4 TTekno Crank
®
with Cassette 125
and Channels Type 4 T-460
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
15
TM
TM
TM
TEKNO®® CRANK TANDE
TEKNO CRANK TANDEM
TEKNO® CRANK TANDE
CRANK OPERATED ROLLER SYSTEMS
Tekno
CRANK
OPERATED
ROLLER SYSTEMS
CHANNEL
OPTIONS
Crank Tandem
Crank Operated Roller Systems — Channel Options
CHANNEL
OPTIONS ROLLER SYSTEMS
CRANK OPERATED
CHANNEL OPTIONS
TEKNO®®
TEKNO
®
CRANK
TANDEM
TEKNOTANDEM
CRANK
WITH CASSETTE 125
WITH
CRANK
TANDEM125
AND CASSETTE
CHANNELS
TYPE 2
AND
CHANNELS
TYPE
WITH CASSETTE 125 2
AND CHANNELS TYPE 2
Tekno® Crank Tandem
with Cassette 125
and Channels Type 2
TEKNO®®
TEKNO
®
CRANK
TANDEM
TEKNOTANDEM
CRANK
WITH CASSETTE 125
WITH
CRANK
TANDEM125
AND CASSETTE
CHANNELS
TYPE 3
AND
CHANNELS
TYPE
WITH CASSETTE 125 3
AND CHANNELS TYPE 3
Tekno® Crank Tandem
with Cassette 125
and Channels Type 3
TEKNO®®
TEKNO
®
CRANK
TANDEM
TEKNO
CRANK TANDEM
WITH CASSETTE 125
WITH
CRANK
TANDEM125
AND CASSETTE
CHANNELS
TYPE 4 T-4
AND
CHANNELS
WITH
CASSETTETYPE
125 4 T-46
AND CHANNELS TYPE 4 T-4
Tekno® Crank Tandem
with Cassette 125
and Channels Type 4 T-460
This drawing and the information contained herein is for general presentation purposes only. The drawing is not intended to be incorporated or used for any engineering
designs, plans, installation and specifications. Contact SunProject for project specific engineering drawings.
16