Go Setting Function

Go Setting Function
It is vital to input this data before using the
LAP TRACK for swimming
practice, otherwise calorie consumption will not
be calculated.
Press the MODE button until you see SWIM appear
Press STOP/NEXT until you see GO SETTING appear
1 yards = 0.9144 meters
25 yards = 22.86 meters
50 yards = 45.72 meters
Unit METRIC (distance in meters) will appear
1 yards = 0.00057 miles
25 yards = .014 miles
50 yards = .028 miles
There is also a BRITISH (distance in miles) setting. To change the setting you press
and hold the SET/RESET button until SEL appears. The display will flash.
Press the START/LAP button on
Back Of Lap Track to toggle
Between Metric/British
Once you have selected your preference press
the SET/RESET button to save your selection.
British setting= (US Standard)
The British setting will be referred to
throughout this walkthrough
Press the START/LAP button located on the back
of the Lap Track to set the pool length
**Note** Since the Lap Track will be attached to only one end of the pool
the lap distance must be twice the length of the pool.
The number of miles will appear. Press and hold The SET/RESET button until you
see ADJ And the number blinks. Press the START/LAP button to move the
Number up and the STOP/NEXT button To move the number down.
***HINT*** Press and hold to make numbers count up/down faster
Press the SET/RESET button to save your settings
Press the START/LAP button located on the
Back of the Lap Track to go to the
Weight setting.
The number of pounds will appear. Press and hold The SET/RESET button until you
see ADJ And the number blinks. Press the START/LAP button to move the
Number up and the STOP/NEXT button To move the number down.
Press the SET/RESET button to save your settings
Press the START/LAP button located on the
Back of the Lap Track to go to set your
Stroke style.
The Freestyle stroke will appear. Press and hold The SET/RESET button until
you see the name blinks. Press the START/LAP button to move the number up
and the STOP/NEXT button To move the number down.
Press the SET/RESET button to save your settings
Go Setting
•Press Mode until you see Swim appear
•Press Stop/Next until you see Go Setting appear
•UNT METRIC (unit metric) will appear
•Press and hold Set/Reset to change to British if desired
•Press the MIB to toggle between Metric and British
•Press Set/Reset once you have chosen the correct units
•Press the MIB to set pool length
•The number of meters (or miles) will appear
•Press and hold Set/Reset until you see the number blink
•Press the MIB to move the number up or Stop/Next to move the number down
•Press Set/Reset to save the number
•Press the MIB to go to weight
•W T (weight) will appear
•Press and hold Set/Reset until you see the number blink
•Press the MIB to move the number up and Stop/Next to move the number down
•Press Set/Reset to save the number
•Press the MIB to go to stroke style
•A stroke name will appear
•Press and hold Set/Reset until you see the name blink
•Press the MIB to move forward or Stop/Next to move backward
•You can toggle between Free > Breast > Back > Fly
•Press Set/Reset to save the swimming style