Product Catalogue

Transcription

Product Catalogue
grating and expanded metal
introduction
Quality People Delivering Quality Products and Services
Today’s construction projects demand the highest quality
standards and at Fisher & Ludlow, we deliver. Since 1954,
you have trusted us to supply exceptional grating and
expanded metal products. Our reputation for superior quality
and service has rewarded us with the privilege of being
specified on many of North America’s largest capital projects.
Our products may be found around the world in industrial
sectors such as oil and gas production, mining, water and
wastewater treatment, power generation, as well as a wide
variety of architectural applications.
With a commitment to continuous improvement in our
safety and quality standards, Fisher & Ludlow leads the
industry. We are ISO 9001:2008 certified and our steel
grating products count towards credits under the Leadership
in Energy and Environmental Design (LEED) green building
program. Paramount to all of our product designs is safety.
At Fisher & Ludlow we believe that safety is not just a goal,
but a lifestyle. By promoting healthy and safe living beyond
the workplace, our successful team takes pride in achieving
outstanding safety track records both on and off the job.
This pride is apparent in the products we create and services
we offer our customers.
With our strategic network of well-stocked warehouses
and fabrication facilities, our products are always readily
available. The friendly and knowledgeable staff in our sales,
engineering, and drafting departments can take your
requirements from structural drawings to detailed grating
drawings and on to completely fabricated, ready-to-install
grating. As we are both a manufacturer and fabricator,
we offer our customers complete “One Source” responsibility
for all their grating needs.
Whether supplying trench grating covers, stair treads,
elevated platforms or catwalks, from the floor up,
you can count on Fisher & Ludlow to supply durable
and reliable products. We thank you for your continued
support in making Fisher & Ludlow your #1 choice for
grating and expanded metal.
our complete product line
bar grating
safety grating
fiberglass reinforced
plastic (FRP) grating
tru-weld® steel and stainless steel
bar grating
grip span® safety grating
molded frp grating
tru-weld® heavy duty bar grating
shur grip® safety grating
pultruded frp grating
expanded metal
fisholow® aluminum rectangular
bar grating
shur step® safety flooring
steel and aluminum
expanded metal
Warranty
fisholow® aluminum i-bar grating
ladder rungs
We warrant all goods of our manufacture
to be free from defects caused by faulty
material or poor workmanship and will at
our option repair or replace, without charge,
or allow credit for any such goods found
on examination by us to be defective under
normal use and service within one year from
date of shipment to the buyer, provided we
are promptly notified in writing upon discovery
of such defects. Goods shall not be returned
to us without our consent in writing.
This warranty does not cover damage
caused by improper installation, overloading,
accident, neglect or harmful alterations, or
repairs made by others. The buyer’s remedies
with respect to defective goods shall be
exclusively limited as above provided.
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
3
contents
5 bar grating
29 safety grating
6 Tru-Weld® Standard Mesh Bar Grating
30 Grip Span®
6
7
8
9
10
11
12
Bar Grating Anatomy
Steel Bar Grating
Custom Fabrication
How to Order
Manufacturing Tolerances
Steel Stair Treads
Standard Mesh Load Tables
14 Stainless Steel Bar Grating
15 Special Mesh Bar Grating
16
17
18
Special Mesh (Metric)
Special Mesh
Theoretical Weights and Open Areas
19 Heavy Duty Bar Grating
20
22
23
Heavy Duty Load Tables
Heavy Duty Special Mesh (Metric)
Heavy Duty Special Mesh
24 Fisholow® Aluminum Standard Mesh
Bar Grating
25
26
28
4
Aluminum Stair Treads
Aluminum Load Tables
Aluminum Special Mesh 31 Grip Span Stair Treads
32 Grip Span Load Tables
38 Grip Span Walkway
39 Shur Grip®
40
41
47
48
Shur
Shur
Shur
Shur
Grip Stair Treads
Grip Load Tables
Grip Walkway
Step® Flooring and Ladder Rungs
49 fiberglass reinforced plastic (FRP) grating
50 Molded FRP
52 Pultruded FRP
53 grating fastening methods
57 Expanded Metal
60 Raised Expanded Metal
61 Flattened Expanded Metal
62 Expanded Metal Versatility
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
bar grating
steel, stainless steel, and aluminum
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
5
standard mesh bar grating
bar grating anatomy
Tru-Weld® Bar Grating
Standard Mesh
Tru-Weld bar grating is forge-welded, a system in which
Fisher & Ludlow was a pioneer. In this process the bearing
bars and cross rods are permanently forged together by heat
and pressure into a single unit construction, resulting in greater
strength per pound than mechanical assembly methods.
The twisted cross rods provide a non-slip walking surface.
What does “Type 19-4” Mean?
Bar grating
For applications where extremely slippery conditions prevail,
Serrated Tru-Weld offers a superior grip surface to the load
bearing bars.
Bar grating types are specified by bearing bar spacing
followed by cross rod spacing.
plain surface
In imperial measurements, bearing bar spacing is described
in sixteenths of an inch. Therefore, Type 19 has bearing bar
centers at 19/16 of an inch (or 1 3/16”). Type 15 has bearing
bar centers at 15/16”. Type 11 is at 11/16” etc. The second
number after the dash in the Type designation refers to
the cross rod spacing. Cross rods are available in either 4”
(standard) or 2” (special) spacings.
All bar grating Types may also be described in metric units.
Again, the first number represents the bearing bar spacing
on centers and the second number represents the cross
rod spacing, both units measured in millimeters. Therefore,
Type 30-102 Metric equals bearing bars at 30mm centers
and cross rods at 102mm centers. This is the metric equivalent
of Type 19-4.
serrated surface
6
Note: Although the special 2” (50mm) cross rod spacing does
allow for less open space on the grating surface, it does not
affect the load rating of the grating. The most economical
and readily available choice for bar grating selection is
Type 19-4 (Type 30-102 Metric).
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
standard mesh bar grating
Steel Bar Grating
Tru-Weld steel bar grating is the most popular product
manufactured by Fisher & Ludlow. Nearly all sizes in Standard
Mesh Type 19-4 (Type 30-102 metric) are readily available in
our warehouses or stocked on the shelves of our distributors.
Standard Mesh
Simplicity in design is surpassed by its versatility in usage.
From mezzanines, platforms, catwalks, and stairs to fences,
benches, racking shelves, and ventilation covers, Tru-Weld
Steel Bar Grating is by no means limited to the industrial
applications for which it was originally designed.
Available in bare steel, shop primed, or hot dip galvanized.
bar grating
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
7
standard mesh bar grating
custom fabrication
Fisher & Ludlow is a full service grating supplier. All of our
products are available in either stock panels, planks and
sheets, or fully fabricated to suit your individual requirements.
Examples of fabrication include:
Standard Mesh
• Cutting to size
• Providing cutouts for penetrations in grating panels
• Welding banding, kick plate, or nosings to grating
• Fabricating stair treads
• Custom additions such as checker plate, lifting handles,
and hinges
• Circular layouts and radial platforms
Bar grating
Our Sales, Engineering, Drafting, and Fabrication departments
can take your requirements from structural drawings to
detailed grating drawings and on to completely fabricated
ready-to-install grating. Armed with the latest technology
in computer aided design and 3-D software applications,
Fisher & Ludlow is dedicated to continuous improvement
and maximizing efficiencies in the detailing process.
Many of today’s projects demand just-in-time delivery.
Our experienced project managers can effectively coordinate
your multi-release schedules to ensure your job site receives
the grating they need, when they need it. Grating panels are
piece marked and clearly identified on our supplied grating
drawings for accurate field installation.
As we are both a manufacturer and fabricator of grating we
can offer our customers complete “One Source” responsibility
for all their grating needs.
8
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
standard mesh bar grating
how to order
Tru-Weld Bar Grating
standard clearances
When ordering or specifying Tru-Weld Bar Grating,
please confirm:
Standard Mesh
• The Type of grating.
Type 19-4 (Type 30-102 Metric) is Standard.
• Bar Size
• Grating surface – serrated or plain top
• Finish – unpainted, shop primer, or hot dip galvanized
• Style and quantity of fasteners, if required.
Example: Fisher & Ludlow Tru-Weld bar grating Type 19-4,
1 1/4 x 3/16 serrated, galvanized.
If purchasing fabricated grating, please also confirm:
bar grating
• Span Direction (Direction of bearing bars)
• Area to be covered and method of support
• Dimensions – indicate whether your dimensions
take clearances into account
• Indicate any banding, kick plate, or nosing requirements
• Shipping and tagging instructions
Standard Practices
Standard quantity measurements for invoicing
Invoicing area or net area for grating ordered to specific
dimensions without drawings will be based on length
by width of each panel, with no deductions for cutouts.
load table information
For grating supplied from a drawing, the invoicing area
shall be on the basis of gross floor area measured out
to out of grating, with no deductions for clearances.
The load table calculations used throughout this catalogue are
based on “single span” condition. The dimensions shown are
for a clear, unsupported span.
Any detailing and/or fabrication of grating by Fisher & Ludlow
will conform to the ANSI/N.A.A.M.M. Standards.
Field measurement
The Seller shall not be responsible for the actual dimensions
of construction work in the field, but shall be responsible for
the accurate fabrication of grating and treads in accordance
with plans and specifications, if applicable.
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
9
standard mesh bar grating
Bar grating
Standard Mesh
manufacturing tolerances
Stair tread
Note: Length of tread is distance
between outer faces or carrier plates
or back to back of carrier angles.
10
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
standard mesh bar grating
steel stair treads
standard tread detail
Tread with checker plate nosing
(Standard)
Tru-Weld standard treads with checker plate nosings are
cost effective, durable and self-cleaning. The checker plate
nosing insures maximum visibility and underfoot safety where
needed most.
Standard Mesh
Cast aluminum abrasive nosings offer maximum slip resistance
on the leading edge of the tread.
End Plate Width and Hole Pattern Dimensions
# of
Bars
TREAD WIDTH
(Type 19-4 Only)
“A” dimension
(Outer Slot)
“B” dimension
(Inner Slot)
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(inches)
157
187
217
248
278
308
6 3/16
7 3/8
8 9/16
9 3/4
10 15/16
12 1/8
64
114
114
178
178
178
2 1/2
4 1/2
4 1/2
7
7
7
n/a
n/a
n/a
114
114
114
n/a
n/a
n/a
4 1/2
4 1/2
4 1/2
5
6
7
8
9
10
For tread widths 9 3/4”, 10 15/16” & 12 1/8”, standard end
plate is complete with 2 slots. See “B” dimension in chart.
End Plate Depth Dimensions
grating depth
METRIC
(mm)
IMPERIAL
(inches)
19 to 32 3/4 to 1 1/4
38 and up 1 1/2 and up
“c” dimension
“d” dimension
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(inches)
44
57
1 3/4
2 1/4
64
76
2 1/2
3
maximum recommended tread lengths
bearing
bar size
maximum lenth of tread
(Type 19-4 Only)
Plain
bar grating
Tread with aluminum abrasive nosing
(Special order)
Serrated
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(ft. & in.)
METRIC
(mm)
IMPERIAL
(ft. & in.)
25 x 4.8
32 x 4.8
38 x 4.8
1 x 3/16
1 1/4 x 3/16
1 1/2 x 3/16
1040
1420
1670
3’ 5”
4’ 8”
5’ 6”
860
1270
1600
2’ 10”
4’ 2”
5’ 3”
Note: Bolts for mounting to stringers are not included.
How to Order
When ordering or specifying Tru-Weld Bar Grating Treads,
please confirm:
• Type, bar size, and surface of grating
• Type of nosing – checker plate is standard
• Width of tread
• Length of tread
• Finish – unpainted, shop primer, or hot dip galvanized
• Number of treads
• Shipping and tagging instructions
Example: Fisher & Ludlow Tru-Weld bar grating treads,
c/w 1 1/4” x 3/16” serrated grating, checker plate nosing
and standard end plates, 12 1/8” wide x 36” long,
painted black, 150 pcs, tagged “Project ABC”.
Note: 1/8” (3.2mm) bearing bar not recommended.
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
11
standard mesh bar grating
type 30 metric
standard tru-weld – type 30 (Metric)
Bar grating
Standard Mesh
Bearing Bars: 30mm centers
Stock panels: 915mm nominal width x 7315mm long
METRIC LEGEND
U=Safe Uniform Load (kPa)
C=Safe Concentrated Load (kN/metre of grating width)
D=Deflection (mm)
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 124.0 MPa.
All metric dimensions are based on a “soft” conversion.
Load/
bearing Approx.
bar size Weight (kg/m2) Deflection
(mm)
TYPE
TYPE
30-102 30-51
U
D
19 x 3.2
19.2
C
D
U
D
19 x 4.8
27.2
C
D
U
D
25 x 3.2
24.6
C
D
U
D
25 x 4.8
35.3
38.4
C
D
U
D
32 x 3.2
29.9
33.0
C
D
U
D
32 x 4.8
43.3
46.4
C
D
U
D
38 x 3.2
35.3
38.4
C
D
U
D
38 x 4.8
51.3
54.4
C
D
U
D
45 x 4.8
59.4
62.5
C
D
U
D
51 x 4.8
67.4
70.6
C
D
U
D
57 x 4.8
75.4
78.6
C
D
U
D
64 x 4.8
83.5
86.7
C
D
Span in millimetres (mm)
610
762
914
1067
1219
1372
17.01
2.52
5.18
2.02
25.52
2.52
7.78
2.02
30.24
1.89
9.22
1.51
45.36
1.89
13.83
1.51
47.25
1.51
14.40
1.21
70.88
1.51
21.60
1.21
68.04
1.26
20.74
1.01
102.03
1.26
31.11
1.01
138.92
1.08
42.34
0.86
181.44
0.95
55.30
0.76
229.64
0.84
69.99
0.67
283.50
0.76
86.41
0.61
10.89
3.94
4.15
3.15
16.33
3.94
6.22
3.15
19.32
2.96
7.37
2.36
29.03
2.96
11.06
2.36
30.24
2.36
11.52
1.89
45.36
2.36
17.28
1.89
43.55
1.97
16.59
1.58
65.32
1.97
24.89
1.58
88.91
1.69
33.87
1.35
116.12
1.48
44.24
1.18
146.97
1.31
55.99
1.05
181.44
1.18
69.13
0.95
7.56
5.68
3.46
4.54
11.34
5.68
5.18
4.54
13.44
4.26
6.14
3.41
20.16
4.26
9.22
3.41
21.00
3.41
9.60
2.72
31.50
3.41
14.40
2.72
30.24
2.84
13.83
2.27
45.36
2.84
20.74
2.27
61.74
2.43
28.23
1.95
80.64
2.13
36.87
1.70
102.06
1.89
46.66
1.51
126.00
1.70
57.61
1.36
5.55
7.73
2.96
6.18
8.33
7.73
4.44
6.18
9.87
5.79
5.27
4.64
14.81
5.79
7.90
4.64
15.43
4.64
8.23
3.71
23.14
4.64
12.34
3.71
22.22
3.86
11.85
3.09
33.33
3.86
17.78
3.09
45.36
3.31
24.20
2.65
59.25
2.90
31.60
2.32
74.98
2.58
40.00
2.06
92.57
2.32
49.38
1.85
4.25
10.09
2.59
8.07
6.38
10.09
3.89
8.07
7.56
7.57
4.61
6.05
11.34
7.57
6.91
6.05
11.81
6.05
7.20
4.84
17.72
6.05
10.80
4.84
17.01
5.04
10.37
4.04
25.52
5.04
15.55
4.04
34.73
4.32
21.17
3.46
45.36
3.78
27.65
3.03
57.41
3.36
35.00
2.69
70.88
3.03
43.21
2.42
3.36
12.77
2.30
10.22
5.04
12.77
3.46
10.22
5.97
9.58
4.10
7.66
8.96
9.58
6.14
7.66
9.33
7.66
6.40
6.13
14.00
7.66
9.60
6.13
13.44
6.39
9.22
5.11
20.16
6.39
13.83
5.11
27.44
5.47
18.82
4.38
35.84
4.79
24.58
3.83
45.36
4.26
31.11
3.41
56.00
3.83
38.41
3.06
1524
1676
1829 1981
2286
2438
2591
2743
Spans and loads in the pink shaded area exceed a deflection of 6mm for
uniform loads of 5kPa. Experience has shown that 6mm deflection is the
maximum deflection to give pedestrian comfort, but can be exceeded for
other types of loads at the discretion of the engineer.
4.84
11.82
3.69
9.46
7.26
11.82
5.53
9.46
7.56
9.46
5.76
7.57
11.34
9.46
8.64
7.57
10.89
7.88
8.30
6.31
16.33
7.88
12.44
6.31
22.23
6.76
16.94
5.41
29.03
5.91
22.12
4.73
36.74
5.26
28.00
4.20
45.36
4.73
34.56
3.78
4.00
14.31
3.35
11.45
6.00
14.31
5.03
11.45
6.25
11.45
5.24
9.16
9.37
11.45
7.86
9.16
9.00
9.54
7.54
7.63
13.50
9.54
11.31
7.63
18.37
8.18
15.40
6.54
23.99
7.15
20.11
5.72
30.37
6.36
25.45
5.09
37.49
5.72
31.42
4.58
3.36
17.03
3.07
13.62
5.04
17.03
4.61
13.62
5.25
13.62
4.80
10.90
7.88
13.62
7.20
10.90
7.56
11.35
6.91
9.08
11.34
11.35
10.37
9.08
15.44
9.73
14.11
7.78
20.16
8.51
18.43
6.81
25.52
7.57
23.33
6.05
31.50
6.81
28.80
5.45
2000
3000
For serrated surface, increase depth by one size.
3540
5330
4.47
15.99
4.43
12.79
6.71
15.99
6.65
12.79
6.44
13.32
6.38
1.66
9.66
13.32
9.57
10.66
13.15
11.42
13.03
9.13
17.18
9.99
17.02
7.99
21.74
8.88
21.54
7.10
26.84
7.99
26.59
6.39
Tru-Weld grating meets N.A.A.M.M. standards.
12
2134
SECtion
modulus
PER 305mm
OF WIDTH
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
3.86
18.54
4.11
14.83
5.79
18.54
6.17
14.83
5.55
4.84
15.45 17.74
5.93
5.53
12.36 14.19
8.33
7.26
15.45 17.74
8.89
8.30
12.36 14.19
11.34 9.88
13.24 15.20
12.10 11.29
10.59 12.16
14.81 12.90
11.59 13.30
15.80 14.75
9.27 10.64
18.75 16.33
10.30 11.82
20.00 18.66
8.24
9.46
23.14 20.16
9.27 10.64
24.69 23.04
7.42
8.51
5560
8310
4.25
3.77
3.36
20.18 22.78 25.54
5.18
4.88
4.61
16.14 18.22 20.43
6.38
5.65
5.04
20.18 22.78 25.54
7.78
7.32
6.91
16.14 18.22 20.43
8.68
7.69
6.86
17.63 19.53 21.89
10.59 9.96
9.41
13.84 15.62 17.51
11.34 10.05 8.96
15.13 17.09 19.16
13.83 13.01 12.29
12.11 13.67 15.32
14.35 12.71 11.34
13.45 15.19 17.03
17.50 16.47 15.55
10.76 12.15 13.62
17.72 15.70 14.00
12.11 13.67 15.32
21.60 20.33 19.20
9.69 10.93 12.26
8000
11960
16290
21290
26940
33250
standard mesh bar grating
type 19
standard tru-weld – type 19
Bearing Bars: 1 3/16“ centers
Stock panels: 3’ nominal width x 24’ long
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 18,000 P.S.I.
bearing
bar size
(inches)
3/4 x 1/8
1 x 1/8
1 x 3/16
1 1/4 x 1/8
1 1/4 x 3/16
1 1/2 x 1/8
1 1/2 x 3/16
1 3/4 x 3/16
2 x 3/16
2 1/4 x 3/16
2 1/2 x 3/16
Span in Feet and inches
2’ 0”
2’ 6”
3’ 0”
3’ 6”
4’ 0”
4’ 6”
5’ 0”
355
0.099
355
0.079
533
0.099
533
0.079
632
0.074
632
0.060
947
0.074
947
0.060
987
0.060
987
0.048
1480
0.060
1480
0.048
1421
0.050
1421
0.040
2132
0.050
2132
.0040
2901
0.043
2901
0.034
3789
0.037
3789
0.030
4796
0.033
4796
0.026
5921
0.030
5921
0.024
227
0.155
284
0.124
341
0.155
426
0.124
404
0.116
505
0.093
606
0.116
758
0.093
632
0.093
789
0.074
947
0.093
1184
0.074
909
0.078
1137
0.062
1364
0.078
1705
0.062
1857
0.067
2321
0.053
2425
0.058
3032
0.047
3069
0.052
3837
0.041
3789
0.047
4737
0.037
158
0.223
237
0.179
237
0.223
355
0.179
281
0.168
421
0.134
421
0.168
632
0.134
439
0.134
658
0.107
658
0.134
987
0.107
632
0.112
947
0.089
947
0.112
1421
0.089
1289
0.096
1934
0.077
1684
0.084
2326
0.067
2132
0.074
3197
0.060
2632
0.067
3947
0.054
116
0.304
203
0.243
174
0.304
305
0.243
206
0.228
361
0.182
309
0.228
541
0.182
322
0.182
564
0.146
483
0.182
846
0.146
464
0.152
812
0.122
696
0.152
1218
0.122
947
0.130
1658
0.104
1237
0.114
2165
0.091
1566
0.101
2741
0.081
1933
0.091
3383
0.073
89
0.397
178
0.318
133
0.397
266
0.318
158
0.298
316
0.238
237
0.298
474
0.238
247
0.238
493
0.191
370
0.238
740
0.191
355
0.199
711
0.159
533
0.199
1066
0.159
725
0.170
1451
0.136
947
0.149
1895
0.119
1199
0.132
2398
0.106
1480
0.119
2961
0.095
70
0.503
158
0.402
105
0.503
237
0.402
125
0.370
281
0.302
187
0.377
421
0.302
195
0.302
439
0.241
292
0.302
658
0.241
281
0.251
632
0.201
421
0.251
947
0.201
573
0.215
12859
0.172
749
0.189
1684
0.151
947
0.168
2132
0.134
1170
0.151
2632
0.121
5’ 6”
6’ 0”
6’ 6” 7’ 0”
7’ 6”
8’ 0”
8’ 6” 9’ 0”
Spans and loads in the pink shaded area exceed a deflection of 1/4”
for
uniform
lbs/sq.
ft. Experience
has ashown
that of
1/4”
Spans
and loads of
in 100
the pink
shaded
area exceed
deflection
1/4”
deflection
is the
maximum
deflection
to give pedestrian
comfort,
but can
for uniform
loads
of 100 lbs./sq.
ft. Experience
has shown
that 1/4”
be
exceededis for
types deflection
of loads attothe
discretion
of the
engineer.
deflection
theother
maximum
give
pedestrian
comfort,
but can
be exceeded for other types of loads at the discretion of the engineer.
For serrated surface, increase depth by one size.
For serrated surface, increase depth by one size.
101
84
70
0.466 0.563 0.670
253
230
211
0.372 0.451 0.536
152
125
105
0.466 0.563 0.670
379
344
316
0.372 0.451 0.536
158
130
110
93
81
0.372 0.451 0.536 0.629 0.730
395
359
329
304
282
0.298 0.360 0.429 0.504 0.584
237
196
164
140
121
0.372 0.451 0.536 0.629 0.730
592
538
493
455
423
0.298 0.360 0.429 0.504 0.584
227
188
158
135
116
101
89
79
70
0.310 0.376 0.447 0.524 0.608 0.698 0.794 0.897 1.006
568
517
474
437
406
379
355
334
316
0.248 0.300 0.358 0.420 0.487 0.559 0.636 0.718 0.804
341
282
237
202
174
152
133
118
105
0.310 0.376 0.447 0.524 0.608 0.698 0.794 0.897 1.006
853
775
711
656
609
568
533
502
474
0.248 0.300 0.358 0.420 0.487 0.559 0.636 0.718 0.804
464
384
322
275
237
206
181
161
143
0.266 0.322 0.383 0.450 0.521 0.599 0.681 0.769 0.862
1161 1055 967
893
829
774
725
683
645
0.273 0.257 0.306 0.360 0.417 0.479 0.545 0.615 0.689
606
501
421
359
309
269
237
210
187
0.233 0.282 0.335 0.393 0.456 0.524 0.596 0.673 0.754
1516 1378 1263 1166 1083 1011
947
892
842
0.186 0.225 0.268 0.315 0.365 0.419 0.477 0.538 0.603
767
634
533
454
392
341
300
266
237
0.207 0.250 0.298 0.350 0.406 0.466 0.530 0.598 0.670
1918 1744 1599 1476 1370 1279 1199 1128 1066
0.166 0.200 0.238 0.280 0.324 0.372 0.424 0.478 0.536
947
783
658
561
483
421
370
328
292
0.186 0.225 0.268 0.315 0.365 0.419 0.477 0.538 0.603
2386 2153 1974 1822 1692 1579 1480 1393 1316
0.149 0.180 0.215 0.252 0.292 0.335 0.381 0.431 0.483
SECtion
modulus
PER FOOT
OF WIDTH
0.122
0.183
0.216
bar grating
3/4 x 3/16
Load/
Approx.
Weight (lbs./ft.2) Deflection
TYPE
TYPE
19-4
19-2
U
D
3.93
C
D
U
D
5.58
C
D
U
D
5.03
C
D
U
D
7.23
7.87
C
D
U
D
6.12
6.76
C
D
U
D
8.87
9.51
C
D
U
D
7.23
7.87
C
D
U
D
10.51
11.15
C
D
U
D
12.17
12.81
C
D
U
D
13.81
14.45
C
D
U
D
15.45
16.09
C
D
U
D
17.11
17.75
C
D
Standard Mesh
IMPERIAL LEGEND
U=Safe Uniform Load (lbs./ft.2)
C=Safe Concentrated Load (lbs./foot of grating width)
D=Deflection (inches)
0.325
0.339
0.507
0.488
0.730
0.994
1.299
1.644
2.029
Tru-Weld grating meets N.A.A.M.M. standards.
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
13
stainless steel bar grating
stainless steel information
Bar grating
Stainless Steel
tru-weld Stainless Steel Bar Grating
Tru-Weld Stainless Steel Bar Grating provides a long-term
durable grating solution for caustic atmospheres where
corrosion resistance and minimum carbide precipitation
are important considerations. Typical applications include
stairs and platforms within chemical production and storage,
food processing plants, and water and wastewater treatment
facilities. Your choice of 304, 304L, 316, or 316L Stainless
Steel grades are available.
Heat from the Electroforge welding process discolors the
surface of the stainless steel in the weld area. For this reason,
Tru-Weld Stainless Steel Bar Grating is best suited for
industrial uses where cosmetic appearance is not a factor.
stainless steel conversion factors
When considering load conditions for stainless steel bar
grating, please apply the calculations in the table below
to the values shown in the carbon steel load tables on
pages 12 and 13.
METRIC LEGEND
U=Safe Uniform Load (kPa)
C=Safe Concentrated Load (kN/metre of grating width)
D=Deflection (mm)
Stainless Steel Grade
304
Stainless Steel
304L
Stainless Steel
316
Stainless Steel
316L
Stainless Steel
14
IMPERIAL LEGEND
U=Safe Uniform Load (lbs./ft.2)
C=Safe Concentrated Load (lbs./foot of grating width)
D=Deflection (inches)
Load/Deflection multiply carbon steel load tables by:
U
C
D
U
C
D
U
C
D
U
C
D
1.111
1.111
1.151
0.917
0.917
0.949
1.111
1.111
1.151
0.917
0.917
0.949
BASED ON MAXIMUM ALLOWABLE FIBRE STRESS
20,000 P.S.I. (137.9 MPa)
16,500 P.S.I. (113.8 MPa)
20,000 P.S.I. (137.9 MPa)
16,500 P.S.I. (113.8 MPa)
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
special mesh bar grating
special mesh information
tru-weld Special Mesh Bar Grating
Tru-Weld Special Mesh Bar Grating offer a variety of close
or wide space mesh options to suit specific aesthetic or
functional bar spacing requirements.
Close Mesh
Advantages of the close mesh grating style include
greatly increased load bearing capabilities and prevention
of fall through by dangerous objects such as heavy tools
or equipment accidentally dropped from above.
close mesh
wide mesh
Wide mesh grating options are designed for applications
requiring additional openness of bar grating to minimize
buildup of snow, ice, or other debris.
Available in most 1/8” and 3/16” Steel and Stainless Steel
bar sizes and select Heavy Duty bar sizes.
bar grating
Wide Mesh
Special Mesh
As with Tru-Weld Standard Mesh Bar Grating, Special Mesh
Bar Grating may be ordered with either plain or serrated
bearing bars. Similarly, panels are manufactured with a
standard 4” cross rod spacing but 2” cross rod spacing
is available.
*Special Mesh Bar Grating is a non-stocked specialty item.
For the most cost effective and readily available bar grating
option, choose Standard Mesh Type 19-4 (Type 30-102 Metric).
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
15
special mesh bar grating
special mesh (metric)
special close mesh
(metric)
Deflections as per table on page 12.
Bar grating
Special Mesh
Type 15 Metric
ADA Compatible with 4.8mm bars
Multiply load values by 2.0 as per
table on page 12.
Type 18 Metric
ADA Compatible with 4.8mm bars
Multiply load values by 1.72 as per
table on page 12.
X
X
Type 24 Metric
Multiply load values by 1.25 as per
table on page 12.
special wide mesh
(metric)
Deflections as per table on page 12.
Type 41 Metric
Multiply load values by 0.73 as per
table on page 12.
Type 48 Metric
Multiply load values by 0.63 as per
table on page 12.
metric Panel width in millimetres
(For 4.8mm bearing bars)
# of
Bars
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
close mesh
standard
mesh
wide mesh
TYPE 15
METRIC
TYPE 18
METRIC
TYPE 24
METRIC
TYPE 30
METRIC
TYPE 41
METRIC
TYPE 48
METRIC
TYPE 60
METRIC
20
35
50
65
80
95
110
125
140
156
171
185
201
216
231
246
261
276
291
306
321
337
352
367
382
397
412
427
442
457
472
487
502
517
532
547
562
577
592
607
22
40
57
75
92
110
127
144
162
179
197
214
232
249
267
284
302
319
337
354
371
389
406
424
441
459
476
494
511
529
546
564
581
598
615
28
52
76
100
124
148
171
195
219
243
267
291
314
338
362
386
410
433
457
481
505
529
552
576
600
624
648
672
695
719
743
767
790
814
838
862
886
910
35
65
95
125
156
186
216
246
276
306
337
367
397
427
457
487
518
548
578
608
638
668
698
729
759
789
819
849
879
910
46
87
129
170
211
252
294
335
381
418
459
500
541
583
624
665
706
748
789
830
872
913
52
100
148
195
243
291
338
386
433
481
529
576
624
683
719
767
814
862
910
65
125
186
246
306
367
427
487
548
608
668
729
789
849
910
Dimensions shown are out to out of bearing bars.
For 3.2mm bearing bars, deduct 1.6mm from panel width.
All metric dimensions are based on a “soft” conversion.
Type 60 Metric
Multiply load values by 0.50 as per
table on page 12.
16
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
special mesh bar grating
special mesh
special close mesh
Deflections as per table
on page 13.
Type 9.5
Type 11
ADA Compatible with 3/16” bars
Multiply load values by 1.72 as per
table on page 13.
Multiply load values by 1.25 as per
table on page 13.
special wide mesh
Deflections as per table
on page 13.
Type 26
Multiply load values by 0.73 as per
table on page 13.
Type 30
Multiply load values by 0.63 as per
table on page 13.
X
# of
Bars
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
close mesh
standard
mesh
wide mesh
TYPE
9.5
TYPE
11
TYPE
15
TYPE
19
TYPE
26
TYPE
30
TYPE
38
25/32
1 3/8
1 31/32
2 9/16
3 5/32
3 3/4
4 11/32
4 15/16
5 17/32
6 1/8
6 23/32
7 5/16
7 29/32
8 1/2
9 3/32
9 11/16
10 9/32
10 7/8
11 15/32
12 1/16
12 21/32
13 1/4
13 27/32
14 7/16
15 1/32
15 5/8
16 7/32
16 13/16
17 13/32
18
18 19/32
19 3/16
19 25/32
20 3/8
20 31/32
21 9/16
22 5/32
22 3/4
23 11/32
23 15/16
7/8
1 9/16
2 1/4
2 15/16
3 5/8
4 5/16
5
5 11/16
6 3/8
7 1/16
7 3/4
8 7/16
9 1/8
9 13/16
10 1/2
11 3/16
11 7/8
12 9/16
13 1/4
13 15/16
14 5/8
15 5/16
16
16 11/16
17 3/8
18 1/16
18 3/4
19 7/16
20 1/8
20 13/16
21 1/2
22 3/16
22 7/8
23 9/16
24 1/4
1 1/8
2 1/16
3
3 15/16
4 7/8
5 13/16
6 3/4
7 11/16
8 5/8
9 9/16
10 1/2
11 7/16
12 3/8
13 5/16
14 1/4
15 3/16
16 1/8
17 1/16
18
18 15/16
19 7/8
20 13/16
21 3/4
22 11/16
23 5/8
24 9/16
25 1/2
26 7/16
27 3/8
28 5/16
29 1/4
30 3/16
31 1/8
32 1/16
33
33 15/16
34 7/8
35 13/16
1 3/8
2 9/16
3 3/4
4 15/16
6 1/8
7 5/16
8 1/2
9 11/16
10 7/8
12 1/16
13 1/4
14 7/16
15 5/8
16 13/16
18
19 3/16
20 3/8
21 9/16
22 3/4
23 15/16
25 1/8
26 5/16
27 1/2
28 11/16
29 7/8
31 1/16
32 1/4
33 7/16
34 5/8
35 13/16
1 27/32
3 15/32
5 3/32
6 23/32
8 11/32
9 31/32
11 19/32
13 7/32
14 27/32
16 15/32
18 3/32
19 23/32
21 11/32
22 31/32
24 19/32
26 7/32
27 27/32
29 15/32
31 3/32
32 23/32
34 11/32
35 31/32
2 1/16
3 15/16
5 13/16
7 11/16
9 9/16
11 7/16
13 5/16
15 3/16
17 1/16
18 15/16
20 13/16
22 11/16
24 9/16
26 7/8
28 5/16
30 3/16
32 1/16
33 15/16
35 13/16
2 9/16
4 15/16
7 5/16
9 11/16
12 1/16
14 7/16
16 13/16
19 3/16
21 9/16
23 15/16
26 5/16
28 11/16
31 1/16
33 7/16
35 13/16
bar grating
Type 15
X
Special Mesh
ADA Compatible with 3/16” bars
Multiply load values by 2.0 as per
table on page 13.
IMPERIAL Panel width in INCHES
(For 3/16” bearing bars)
Dimensions shown are out to out of bearing bars.
For 1/8” bearing bars, deduct 1/16” from panel width.
Type 38
Multiply load values by 0.50 as per
table on page 13.
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
17
special mesh bar grating
theoretical weights and open areas
All metric dimensions are based on a “soft” conversion.
metric weights (kg/m2)
bearing Bar
size (mm)
Special Mesh
19 x 3.2
19 x 4.8
25 x 3.2
25 x 4.8
32 x 3.2
32 x 4.8
38 x 3.2
38 x 4.8
44 x 4.8
51 x 4.8
57 x 4.8
64 x 4.8
special close mesh
standard mesh
special wide mesh
TYPE
15-102
TYPE
15-51
TYPE
18-102
TYPE
18-51
TYPE
24-102
TYPE
24-51
TYPE
30-102
TYPE
30-51
TYPE
41-102
TYPE
41-51
TYPE
48-102
TYPE
48-61
TYPE
60-102
TYPE
60-51
35.30
51.31
45.99
67.48
56.69
83.49
67.48
99.55
116.11
132.27
147.40
163.51
38.38
54.39
49.07
70.55
59.76
86.62
70.55
102.63
119.18
135.34
150.48
166.64
30.86
44.67
40.09
58.64
49.31
72.46
58.64
86.27
100.58
114.49
127.53
141.49
33.93
47.80
43.16
61.71
52.39
75.53
61.71
89.40
103.65
117.57
130.65
144.57
23.58
33.49
30.12
42.72
36.91
53.80
43.75
65.62
76.07
86.27
95.84
106.05
27.00
36.42
33.10
46.68
39.89
56.78
46.73
70.21
80.66
90.86
100.43
110.64
19.19
27.24
24.56
35.30
29.88
43.31
35.30
51.31
59.42
67.43
75.43
83.54
22.31
30.37
27.68
38.43
33.01
46.43
38.43
54.44
62.54
70.55
78.56
86.66
n/a
n/a
19.19
27.49
23.34
33.74
27.49
39.94
46.14
52.34
58.59
64.74
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
12.84
18.02
16.26
23.19
19.73
28.37
23.19
34.23
40.67
45.90
50.78
55.95
15.28
20.51
18.75
25.68
22.17
30.86
25.68
37.35
44.87
50.09
54.98
60.20
11.03
15.33
13.87
19.58
16.70
23.83
19.58
28.81
34.27
38.57
42.62
46.92
13.48
17.77
16.31
22.02
19.14
26.32
22.02
31.93
38.52
42.82
46.82
51.12
imperial weights (lbs/ft2)
Bar grating
bearing Bar
special close mesh
standard mesh
special wide mesh
size (inches) TYPE 9.5-4 TYPE 9.5-2 TYPE 11-4 TYPE 11-2 TYPE 15-4 TYPE 15-2 TYPE 19-4 TYPE 19-2 TYPE 26-4 TYPE 26-2 TYPE 30-4 TYPE 30-2 TYPE 38-4 TYPE 38-2
3/4 x 1/8
7.23
7.86
6.32
6.95
4.83
5.53
3.93
4.57
n/a
n/a
2.63
3.13
2.26
2.76
3/4 x 3/16
10.51
11.14
9.15
9.79
6.86
7.46
5.58
6.22
n/a
n/a
3.69
4.20
3.14
3.64
1 x 1/8
9.42
10.05
8.21
8.84
6.17
6.78
5.03
5.67
3.93
n/a
3.33
3.84
2.84
3.34
1 x 3/16
13.82
14.45
12.01
12.64
8.75
9.56
7.23
7.87
5.63
n/a
4.75
5.26
4.01
4.51
1 1/4 x 1/8
11.61
12.24
10.10
10.73
7.56
8.17
6.12
6.76
4.78
n/a
4.04
4.54
3.42
3.92
1 1/4 x 3/16
17.10
17.74
14.84
15.47
11.02
11.63
8.87
9.51
6.91
n/a
5.81
6.32
4.88
5.39
1 1/2 x 1/8
13.82
14.45
12.01
12.64
8.96
9.57
7.23
7.87
5.63
n/a
4.75
5.26
4.01
4.51
1 1/2 x 3/16
20.39
21.02
17.67
18.31
13.44
14.38
10.51
11.15
8.18
n/a
7.01
7.65
5.90
6.54
1 3/4 x 3/16
23.78
24.41
20.60
21.23
15.58
16.52
12.17
12.81
9.45
n/a
8.33
9.19
7.02
7.89
2 x 3/16
27.09
27.72
23.45
24.08
17.67
18.61
13.81
14.45
10.72
n/a
9.40
10.26
7.90
8.77
2 1/4 x 3/16
30.19
30.82
26.12
26.76
19.63
20.57
15.45
16.09
12.00
n/a
10.40
11.26
8.73
9.59
2 1/2 x 3/16
33.49
34.13
28.98
29.61
21.72
22.66
17.11
17.75
13.26
n/a
11.46
12.33
9.61
10.47
metric open area
bearing Bar
special close mesh
size (mm)
TYPE 15 TYPE 18 TYPE 24
51mm cross rods
3.2mm
71%
74%
77%
4.8mm
61%
64%
70%
102mm cross rods
3.2mm
75%
78%
82%
4.8mm
64%
68%
75%
standard mesh
imperial open area
special wide mesh
TYPE 30
TYPE 41
TYPE 48 TYPE 60
79%
74%
81%
78%
82%
79%
83%
81%
84%
79%
87%
83%
88%
84%
89%
86%
bearing Bar
special close mesh
standard mesh
size (inches) TYPE 9.5 TYPE 11 TYPE 15
TYPE 19
2” cross rods
1/8
71%
74%
77%
78%
3/16
61%
64%
70%
74%
4” cross rods
1/8
75%
78%
82%
84%
3/16
64%
68%
75%
79%
RailROAD Grating
Tru-Weld Steel Railroad Grating is special wide mesh Type 26-4
(Type 41-102 Metric) with bearing bars supplied serrated for
additional safety. It was originally designed specifically for
use as brake steps, running boards, walkways, and platforms
on railcars and locomotives. Railroad Grating is supplied as
standard AAR (Association of American Railroads) approved
welded bar grating with bar spacing at 1 5/8” centers and
cross rods at 4” centers.
18
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
special wide mesh
TYPE 26
TYPE 30 TYPE 38
81%
78%
82%
79%
83%
81%
87%
83%
88%
84%
89%
86%
heavy duty bar grating
heavy duty information
Heavy-Duty Steel Bar Grating
Steel Bar Grating with bearing bars thicker than 3/16” is
considered to be “Heavy Duty” and carries the designation
prefix “Type HD”. Available bar thicknesses are 1/4”, 5/16”,
and 3/8” in either a plain or serrated surface. Standard depths
range from 1” up to 4”, although larger sizes are available
upon request.
Heavy Duty
Tru-Weld Heavy Duty Steel Bar Grating is commonly used for
floor trench and sump covers exposed to heavy equipment
traffic. It is used extensively throughout mining, power
generation, highways, airfields, and on truck terminal loading
docks and ramps. It is suitable for large single span conditions
or where grating must support extreme loads.
bar grating
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
19
heavy duty bar grating
heavy duty tru-weld – type HD-30 (Metric)
Bar grating
Heavy Duty
Bearing Bars: 30mm centers
Panel Sizes: 914mm nomimal width x 6096mm long for 6.4mm only
610mm nomimal width x 6096mm long for 7.9mm and 9.5mm
20
type hd-30 metric
METRIC LEGEND
U=Safe Uniform Load (kPa)
C=Safe Concentrated Load (kN/metre of grating width)
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 137.9 MPa.
All metric dimensions are based on a “soft” conversion.
Load/
Span in millimetres (mm)
bearing Approx.
bar size Weight (kg/m2) Deflection
(mm)
TYPE
TYPE
305
457
610
762
914
1067 1219 1372 1524 1676
30-102 30-51
U
268
120
67
43
30
22
17
13
11
9
25 x 6.4
47.0
51.3
C
41
27
20
16
14
12
10
9
8
7
U
336
150
84
54
38
28
21
17
14
11
25 x 7.9
57.5
65.9
C
51
34
26
21
17
15
13
12
10
9
U
403
179
101
65
45
33
25
20
16
13
25 x 9.5
68.0
72.7
C
61
41
31
25
20
18
15
14
12
11
U
419
187
105
67
47
34
26
21
17
14
32 x 6.4
58.0
62.0
C
64
43
32
26
21
18
16
14
13
12
U
524
234
131
84
59
43
33
26
21
18
32 x 7.9
71.0
80.1
C
80
54
40
32
27
23
20
18
16
15
U
629
280
157
101
70
51
39
31
25
21
32 x 9.5
84.0
88.9
C
96
64
48
38
32
27
24
21
19
17
U
604
269
151
97
67
49
38
30
24
20
38 x 6.4
68.0
72.7
C
92
61
46
37
31
26
23
20
18
17
U
755
337
189
121
84
62
48
38
30
25
38 x 7.9
84.0
93.7
C
115
77
58
46
39
33
29
26
23
21
U
906
404
227
145
101
74
57
45
36
30
38 x 9.5
100.0
105.0
C
138
92
69
55
46
39
35
31
28
25
U
822
366
206
132
92
67
51
41
33
27
44 x 6.4
79.0
83.5
C
125
84
63
50
42
36
31
28
25
23
U
1028
458
257
165
115
84
64
51
41
34
44 x 7.9
97.5
107.9
C
157
105
79
63
53
45
39
35
32
29
U
1233
549
308
198
137
101
77
61
49
41
44 x 9.5
116.0
121.1
C
188
126
94
75
63
54
47
42
38
34
U
1074
478
268
172
120
88
67
53
43
36
51 x 6.4
89.0
94.7
C
164
109
82
66
55
47
41
36
33
30
U
1343
598
336
215
150
110
84
67
54
45
51 x 7.9
110.0
121.6
C
205
137
103
82
69
59
36
46
41
38
U
1611
717
403
258
179
132
101
80
65
53
51 x 9.5
131.0
137.2
C
246
164
123
98
82
70
61
55
49
45
U
1359
605
340
218
151
111
85
67
54
45
57 x 6.4
100.0
116.2
C
207
138
104
83
69
59
52
46
41
38
U
1699
757
425
273
189
139
107
84
68
57
57 x 7.9
123.5
149.4
C
259
173
130
104
87
74
65
58
52
48
U
2039
908
510
327
227
167
128
101
82
68
57 x 9.5
147.0
169.4
C
311
207
155
124
104
89
78
69
62
57
U
1678
747
419
269
187
137
105
83
67
56
64 x 6.4
110.0
116.2
C
256
171
128
102
85
73
64
57
51
47
U
2098
934
524
336
234
172
132
104
84
70
64 x 7.9
136.5
149.4
C
2075
214
160
128
107
92
80
71
64
59
U
2517 1121
629
403
280
206
158
124
101
83
64 x 9.5
163.0
169.4
C
384
256
192
154
128
110
96
85
77
70
U
2416 1076
604
387
269
197
151
119
97
80
76 x 6.4
131.0
137.7
C
368
246
184
147
123
105
92
82
74
67
U
3020 1345
755
484
337
247
189
149
121
100
76 x 7.9
162.5
177.2
C
461
308
230
184
154
132
115
103
93
84
U
3624 1614
906
581
404
296
227
179
145
120
76 x 9.5
194.0
201.1
C
553
369
276
221
184
158
138
123
111
101
U
3289 1465
822
527
366
269
206
163
132
109
89 x 6.4
152.0
159.2
C
502
335
251
201
167
143
125
111
100
91
U
4111 1831 1028
659
458
336
258
204
165
136
89 x 7.9
189.0
204.6
C
627
419
314
251
209
179
157
139
126
114
U
4933 2197 1233
790
549
403
309
244
198
163
89 x 9.5
226.0
233.4
C
752
502
376
301
251
215
188
167
151
137
U
4295 1913 1074
688
478
351
269
212
172
142
102 x 6.4 173.0
193.8
C
655
437
328
262
219
187
164
146
131
119
U
5369 2392 1343
860
598
439
336
265
215
178
102 x 7.9 215.0
232.4
C
819
547
410
328
274
234
205
182
164
149
U
6443 2870 1611 1032 717
526
403
318
258
213
102 x 9.5 257.0
279.3
C
983
656
491
393
328
281
246
218
197
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com179
Tru-Weld grating meets N.A.A.M.M. standards.
1829
1981
2134
2286
2438
7
7
9
9
11
10
12
11
15
14
17
16
17
15
21
19
25
23
23
21
29
26
34
31
30
27
38
34
45
41
38
35
48
44
57
52
47
43
59
54
70
64
67
61
84
77
101
92
91
84
114
105
137
125
119
109
149
137
179
164
6
6
8
8
10
9
10
10
13
13
15
15
14
14
18
18
21
21
19
19
24
24
29
29
25
25
32
32
38
38
32
32
40
40
48
48
40
39
50
49
60
59
57
57
72
71
86
85
78
77
98
97
117
116
102
101
128
126
153
151
5
6
7
8
8
9
9
9
11
12
13
14
12
13
16
17
19
20
17
18
21
23
25
27
22
23
28
29
33
35
28
30
35
37
42
44
34
37
43
46
51
55
49
53
62
66
74
79
67
72
84
90
101
108
88
94
110
117
132
140
5
5
6
7
7
8
7
9
9
11
11
13
11
12
14
15
16
18
15
17
19
21
22
25
19
22
24
28
29
33
24
28
30
35
36
41
30
34
38
43
45
51
43
49
54
62
65
74
59
67
74
84
88
100
76
87
96
109
115
131
4
5
5
7
6
8
7
8
9
10
10
12
9
12
12
15
14
17
13
16
16
20
19
24
17
20
21
26
25
31
21
26
27
33
32
39
26
32
33
40
39
48
38
46
48
58
57
69
51
63
64
79
77
94
67
82
84
103
101
123
SECtion
modulus
PER 305mm
OF WIDTH
6900
8625
10350
10780
13475
16170
15520
19410
23300
21100
26400
31700
27600
34500
41400
34900
43650
52400
43100
53900
64700
62100
77600
93100
84500
105650
126800
110400
138000
165600
heavy duty bar grating
type hd-19
heavy duty tru-weld – type HD-19
Bearing Bars: 1 3/16“ centers
Panel Sizes: 3’ 0” nomimal width x 20’ for 1/4” only
2’ 0” nomimal width x 20’ for 5/16” and 3/8” only
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 20,000 P.S.I.
bearing
bar size
(inches)
1 x 1/4
1 x 5/16
1 1/4 x 1/4
1 1/4 x 5/16
1 1/4 x 3/8
1 1/2 x 1/4
1 1/2 x 5/16
1 1/2 x 3/8
1 3/4 x 1/4
1 3/4 x 5/16
1 3/4 x 3/8
2 x 1/4
2 x 5/16
2 x 3/8
2 1/4 x 1/4
2 1/4 x 5/16
2 1/4 x 3/8
2 1/2 x 1/4
2 1/2 x 5/16
2 1/2 x 3/8
3 x 1/4
3 x 5/16
3 x 3/8
3 1/2 x 1/4
3 1/2 x 5/16
3 1/2 x 3/8
4 x 1/4
4 x 5/16
4 x 3/8
(lbs./ft2)
Deflection
TYPE
TYPE
19-4
19-2
U
9.4
10.5
C
U
12.4
13.5
C
U
13.8
14.9
C
U
11.6
12.7
C
U
15.3
16.4
C
U
17.1
18.2
C
U
13.8
14.9
C
U
18.1
19.2
C
U
20.4
21.5
C
U
16.0
17.1
C
U
21.0
22.1
C
U
23.7
24.8
C
U
18.3
19.4
C
U
23.8
24.9
C
U
27.0
28.1
C
U
20.5
21.6
C
U
25.3
26.5
C
U
30.1
31.3
C
U
22.7
23.8
C
U
29.5
30.6
C
U
33.6
34.7
C
U
27.1
28.2
C
U
35.2
36.3
C
U
40.1
41.2
C
U
31.5
32.6
C
U
40.8
41.9
C
U
46.7
47.8
C
U
38.6
39.7
C
U
46.5
47.6
C
U
56.1
57.2
C
Span in feet and inches
1’ 0”
5613
2807
7020
3510
8427
4213
8773
4387
10967
5484
13160
6580
12627
6313
15787
7893
18947
9473
17187
8593
21487
10743
25787
12893
22453
11227
28067
14034
33680
16840
28427
14213
35527
17763
42627
21313
35093
17547
43860
21930
52627
26313
50520
25260
63154
31577
75787
37893
68773
34387
85967
42984
103160
51580
89827
44913
112280
56140
134733
67367
1’ 6”
2’ 0”
2’ 6”
3’ 0”
3’ 6”
4’ 0”
4’ 6”
2495 1403
898
624
458
351
277
1871 1403 1123 936
802
702
624
3120 1755 1123 780
573
439
347
2340 1755 1404 1170 1003 878
780
3745 2107 1348 936
688
527
416
2809 2107 1685 1404 1204 1053 936
3899 2193 1404 975
716
548
433
2924 2193 1755 1462 1253 1097 975
4874 2742 1755 1219 895
686
542
3656 2742 2194 1828 1567 1371 1219
5849 3290 2106 1462 1074 823
650
4387 3290 2632 2193 1880 1645 1462
5612 3157 2020 1403 1031 789
624
4209 3157 2525 2104 1804 1578 1403
7017 3947 2526 1754 1289 987
780
5263 3947 3157 2631 2256 1973 1754
8421 4737 3031 2105 1547 1184 936
6316 4737 3789 3158 2707 2368 2105
7639 4297 2750 1910 1403 1074 849
5729 4297 3437 2864 2455 2148 1910
9550 5372 3438 2388 1754 1343 1061
7163 5372 4297 3581 3070 2686 2388
11461 6447 4126 2865 2105 1612 1273
8596 6447 5157 4298 3684 3223 2865
9979 5613 3593 2495 1833 1403 1109
7484 5613 4491 3742 3208 2807 2495
12474 7017 4491 3119 2291 1754 1386
9356 7017 5614 4678 4010 3509 3119
14969 8420 5389 3742 2749 2105 1663
11227 8420 6736 5613 4811 4210 3742
12634 7107 4548 3159 2321 1777 1404
9476 7107 5685 4738 4061 3553 3159
15790 8882 5684 3948 2901 2221 1755
11843 8882 7105 5936 5076 4441 3948
18945 10657 6820 4736 3480 2664 2105
14209 10657 8525 7104 6090 5328 4736
15597 8773 5615 3899 2865 2193 1733
11698 8773 7019 5849 5013 4387 3899
19494 10965 7018 4873 3581 2741 2166
14620 10965 8772 7310 6266 5483 4873
23390 13157 8420 5847 4296 3289 2599
17542 13157 10525 8771 7518 6578 5847
22453 12630 8083 5613 4124 3158 2495
16840 12630 10104 8420 7217 6315 5613
28068 15789 10105 7017 5156 3948 3119
21051 15789 12631 10526 9022 7894 7017
33683 18947 12126 8421 6187 4737 3743
25262 18947 15157 12631 10827 9473 8421
30566 17193 11004 7641 5614 4298 3396
22924 17193 13755 11462 9825 8597 7641
38208 21492 13755 9552 7018 5373 4245
28656 21492 17194 14328 12281 10746 9552
45849 25790 16506 11462 8421 6448 5094
34387 25790 20632 17193 14737 12895 11462
39923 22457 14372 9981 7333 5614 4436
29942 22457 17965 14971 12832 11228 9981
49902 28070 17965 12476 9166 7018 5545
37427 28070 22456 18714 16040 14035 12476
59881 33683 21557 14970 10999 8421 6653
44911
33683 26947 22456 19248
16842 14970
www.fisherludlow.com
1-800-334-2047
Tru-Weld grating meets N.A.A.M.M. standards.
6’ 0”
6’ 6”
7’ 0”
7’ 6”
SECtion
modulus
PER FOOT
8’ 0” OF WIDTH
88
0.432
351
110
0.538
439
132
0.646
527
137
0.675
548
172
0.842
686
5’ 0”
5’ 6”
225
561
281
702
337
843
351
877
439
1097
526
1316
505
1263
632
1579
758
1895
687
1719
859
2149
1031
2579
898
2245
1123
2807
1347
3368
1137
2843
1421
3553
1705
4263
1404
359
1755
2811
2105
5263
2021
5052
2526
6316
3031
7579
2751
6877
3439
8597
4126
10316
3593
8983
4491
11228
5389
13473
(USA)
186
156
133
115
100
510
468
432
401
374
233
195
166
144
125
638
585
540
502
468
279
234
199
172
150
766
702
648
602
562
290
244
208
179
156
798
731
675
627
585
363
305
260
224
195
997
914
844
784
731
435
366
311
269
234
206
1.009
1196 1097 1012
940
877
823
417
351
299
258
224
197
0.972
1148 1052
971
902
842
789
522
439
374
323
281
247
1.212
1435 1316 1214 1128 1053
987
626
526
448
387
337
296
1.453
1722 1579 1457 1353 1263 1184
568
477
407
351
306
269
1.323
1562 1432 1322 1228 1146 1074
710
597
509
439
382
336
1.651
1953 1791 1653 1535 1433 1343
852
716
610
526
458
403
1.978
2344 2149 1984 1842 1719 1612
742
624
531
458
399
351
1.728
2041 1871 1727 1604 1497 1403
928
780
664
573
499
439
2.156
2552 2339 2159 2005 1871 1754
1113 936
797
687
599
526
2.583
3062 2807 2591 2406 2245 2105
940
790
673
580
505
444
2.700
2584 2369 2187 2030 1895 1777
1175 987
841
725
632
555
3.369
3230 2961 2733 2538 2369 2221
1409 1184 1009
870
758
666
4.036
3875 3552 3279 3045 2842 2664
1160 975
831
716
624
548
2.700
3190 2924 2699 2507 2340 2193
1450 1219 1039
895
780
685
3.369
3987 3655 3374 3133 2924 2741
1740 1462 1246 1074
936
822
4.036
4784 4386 4048 3759 3508 3289
1670 1403 1196 1031
898
789
3.889
4593 4210 3886 3609 3368 3158
2088 1754 1495 1289 1123
987
4.852
5742 5263 4858 4511 4210 3948
2505 2105 1794 1547 1347 1184
5.813
6890 6316 5830 5413 5052 4737
2273 1910 1628 1404 1223 1075
5.293
6252 5731 5290 4912 4585 4298
2842 2388 2035 1755 1529 1344
6.604
7815 7164 6613 6141 5731 5371
3410 2866 2442 2105 1834 1612
7.911
9378 8597 7935 7369 6877 6448
2969 2495 2126 1833 1597 1404
7.000
8166 7486 6910 6416 5988 5614
3712 3119 2658 2292 1996 1755
8.625
10207 9357 8637 8020 7485 7018
4454 3743 3189 2750 2395 2105
10.446
12248
11228 10364(Canada)
9624 8982
8421 & ludLow
1-800-268-6277
< fisher
bar grating
1 x 3/8
Approx. Weight Load/
Heavy Duty
IMPERIAL LEGEND
U=Safe Uniform Load (lbs./ft.2)
C=Safe Concentrated Load (lbs./foot of grating width)
21
heavy duty bar grating
heavy duty special mesh (metric)
heavy duty close mesh (metric)
Type HD-24 Metric
Bar grating
Heavy Duty
Multiply load values by 1.25 as per table on page 20.
Deflections as per table on page 20. Dimensions shown are out to out of bearing bars. All metric dimensions are based on a “soft” conversion.
metric Panel width in millimetres
# of
Bars
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
close mesh
Type HD-24 Metric
standard mesh
Type HD-30 Metric
wide mesh
Type HD-35 Metric
wide mesh
Type HD-48 Metric
wide mesh
Type HD-60 Metric
6mm
BAR
7.9mm
BAR
9.5mm
BAR
6mm
BAR
7.9mm
BAR
9.5mm
BAR
6mm
BAR
7.9mm
BAR
9.5mm
BAR
6mm
BAR
7.9mm
BAR
9.5mm
BAR
6mm
BAR
7.9mm
BAR
9.5mm
BAR
30
54
78
102
125
149
173
197
221
244
268
292
316
340
364
387
411
435
458
483
506
530
554
578
602
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
37
67
97
127
157
187
217
248
278
308
338
368
398
429
459
489
519
549
579
610
640
670
700
730
760
791
821
851
881
911
38
68
98
129
159
189
219
249
279
310
340
370
400
430
460
490
520
550
580
611
40
70
100
130
160
191
221
251
281
311
341
371
402
432
462
492
522
552
582
613
41
76
111
146
181
216
251
286
321
356
391
425
460
495
530
565
600
635
670
705
740
775
810
845
879
914
43
78
113
148
183
217
252
287
322
357
392
427
462
497
532
567
602
44
79
114
149
184
219
254
289
324
359
394
429
464
499
534
569
604
54
102
149
197
244
292
340
387
435
482
530
578
625
673
721
768
816
864
911
56
103
151
198
246
294
341
389
436
484
532
579
627
57
105
152
200
248
295
343
391
438
486
533
581
629
67
127
187
248
308
368
429
489
549
610
670
730
791
851
911
68
129
189
249
310
370
430
498
551
612
70
130
191
251
311
371
432
492
552
613
heavy duty wide mesh (metric)
22
Type HD-35 Metric
Type HD-48 Metric
Type HD-60 Metric
Multiply load values by 0.86 as per table
on page 20.
Multiply load values by 0.63 as per table
on page 20.
Multiply load values by 0.50 as per table
on page 20.
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
heavy duty bar grating
heavy duty special mesh
heavy duty close mesh
Type HD-15
Multiply load values by 1.25 as per table on page 21.
imperial Panel width in inches
# of
Bars
standard mesh
Type HD-19
1/4
BAR
5/16
BAR
3/8
BAR
1/4
BAR
1 3/16
2 1/8
3 1/16
4
4 15/16
5 7/8
6 13/16
7 3/4
8 11/16
9 5/8
10 9/16
11 1/2
12 7/16
13 3/8
14 5/16
15 1/4
16 3/16
17 1/8
18 1/16
19
19 15/16
20 7/8
21 13/16
22 3/4
23 11/16
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1 7/16
2 5/8
3 13/16
5
6 3/16
7 3/8
8 9/16
9 3/4
10 15/16
12 1/8
13 5/16
14 1/2
15 11/16
16 7/8
18 1/16
19 1/4
20 7/16
21 5/8
22 13/16
24
25 3/16
26 3/8
27 9/16
28 3/4
29 15/16
31 1/8
32 5/16
33 1/2
34 11/16
35 7/8
5/16
BAR
3/8
BAR
1 1/2
1 9/16
2 11/16
2 3/4
3 7/8
3 15/16
5 1/16
5 1/8
6 1/4
6 5/16
7 7/8
7 1/2
8 5/8
8 11/16
9 13/16
9 7/8
11
11 1/16
12 3/16
12 1/4
13 3/8
13 7/16
14 9/16
14 5/8
15 3/4 15 13/16
16 15/16
17
18 1/8
18 3/16
19 5/16
19 3/8
20 1/2
20 9/16
21 11/16 21 3/4
22 7/8 22 15/16
24 1/16
24 1/8
wide mesh
Type HD-22
wide mesh
Type HD-30
wide mesh
Type HD-38
1/4
BAR
5/16
BAR
3/8
BAR
1/4
BAR
5/16
BAR
3/8
BAR
1/4
BAR
5/16
BAR
3/8
BAR
1 5/8
3
4 3/8
5 3/4
7 1/8
8 1/2
9 7/8
11 1/4
12 5/8
14
15 3/8
16 3/4
18 1/8
19 1/2
20 7/8
22 1/4
23 5/8
25
26 3/8
27 3/4
29 1/8
30 1/2
31 7/8
33 1/4
34 5/8
36
1 11/16
3 1/16
4 7/16
5 13/16
7 3/16
8 9/16
9 15/16
11 5/16
12 11/16
14 1/16
15 7/16
16 13/16
18 3/16
19 9/16
20 15/16
22 5/16
23 11/16
1 3/4
3 1/8
4 1/2
5 7/8
7 1/4
8 5/8
10
11 3/8
12 3/4
14 1/8
15 1/2
16 7/8
18 1/4
19 5/8
21
22 3/8
23 3/4
2 1/8
4
5 7/8
7 3/4
9 5/8
11 1/2
13 3/8
15 1/4
17 1/8
19
20 7/8
22 3/4
24 5/8
26 1/2
28 3/8
30 1/4
32 1/8
34
35 7/8
2 3/16
4 1/16
5 15/16
7 13/16
9 11/16
11 9/16
13 7/16
15 5/16
17 3/16
19 1/16
20 15/16
22 13/16
24 11/16
2 1/4
4 1/8
6
7 7/8
9 3/4
11 5/8
13 1/2
15 3/8
17 1/4
19 1/8
21
22 7/8
24 3/4
2 5/8
5
7 3/8
9 3/4
12 1/8
14 1/2
16 7/8
19 1/4
21 5/8
24
26 3/8
28 3/4
31 1/8
33 1/2
35 7/8
2 11/16
5 1/16
7 7/16
9 13/16
12 3/16
14 9/16
16 15/16
19 5/8
21 11/16
24 1/16
2 3/4
5 1/8
7 1/2
9 7/8
12 1/4
14 5/8
17
19 3/8
21 3/4
24 1/8
bar grating
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
close mesh
Type HD-15
Heavy Duty
Deflections as per table on page 21. Dimensions shown are out to out of bearing bars.
heavy duty wide mesh
Type HD-22
Type HD-30
Type HD-38
Multiply load values by 0.86 as per table
on page 21.
Multiply load values by 0.63 as per table
on page 21.
Multiply load values by 0.50 as per table
on page 21.
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
23
aluminum standard mesh bar grating
aluminum information
Bar grating
Aluminum Standard Mesh
Fisholow® Rectangular
and I-Bar Grating
Fisholow Aluminum Bar Gratings employ a unique interlocking
system that joins the bearing bars and cross rods together
in panels of exceptional rigidity and strength. Lightweight,
corrosion-resistant, non-sparking alloys are ideal for pedestrian
platforms in chemical, petroleum, and food processing plants.
Fisholow gratings is recommended in most water and waste
water treatment facilities and is becoming increasingly popular
for use in architectural building designs.
Fisholow Aluminum Bar Grating is available in two bar profiles:
Rectangular Bar and I-bar. Similar to Tru-Weld Steel Bar
Grating, Fisholow Rectangular Bar Grating is offered with
a plain or serrated surface. Fisholow I-Bar Grating produces
exceptional load ratings at a fraction of the weight of its
rectangular counterpart, and is designed with a slip resistant
corrugated surface on the top of each I-bar.
rectangular bar
Both Rectangular Bar and I-Bar styles are available in special
mesh options.
i-bar
24
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
aluminum standard mesh bar grating
aluminum stair treads
standard tread detail
Aluminum Tread with corrugated
angle nosing (Standard)
End Plate Width and Hole Pattern Dimensions
# of
Bars
TREAD WIDTH
(Type 19-4 Only)
“A” dimension
(Outer Slot)
“B” dimension
(Inner Slot)
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(inches)
157
187
217
248
278
308
6 3/16
7 3/8
8 9/16
9 3/4
10 15/16
12 1/8
64
114
114
178
178
178
2 1/2
4 1/2
4 1/2
7
7
7
n/a
n/a
n/a
114
114
114
n/a
n/a
n/a
4 1/2
4 1/2
4 1/2
5
6
7
8
9
10
The optional cast aluminum abrasive nosing offers a superior
slip resistance on the leading edge of the tread.
bar grating
aluminum Tread with aluminum
abrasive nosing (Special order)
Aluminum Standard Mesh
Fisholow treads with standard corrugated angle nosing are
strong, lightweight, and self-cleaning. They are ideal for
applications requiring corrosion resistance, non-sparking,
and rust proof grating. The corrugated angle nosing insures
maximum visibility and underfoot safety where needed most.
For tread widths 9 3/4”, 10 15/16” & 12 1/8”, standard end
plate is complete with 2 slots. See “B” dimension in chart.
Note: Bolts for mounting to stringers are not included.
How to Order
When ordering or specifying Fisholow treads, please confirm:
maximum recommended tread lengths
bearing
bar size
maximum lenth of tread
(Type 19-4 Only)
Plain
Serrated
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(ft. & in.)
METRIC
(mm)
IMPERIAL
(ft. & in.)
25 x 4.8
32 x 4.8
38 x 4.8
44 x 4.8
1 x 3/16
1 1/4 x 3/16
1 1/2 x 3/16
1 3/4 x 3/16
710
860
1070
1300
2’ 4”
2’ 10”
3’ 6”
4’ 3”
–
790
970
1170
–
2’ 7”
3’ 2”
3’ 10”
Note: 1/8” (3.2mm) bearing bar not recommended.
• Type, bar size, and surface of grating
• Type of nosing – corrugated angle nosing is standard
• Width of tread
• Length of tread
• Number of treads
• Shipping and tagging instructions
Example: Fisher & Ludlow Fisholow treads, c/w 1 1/4” x 3/16”
serrated rectangular-bar aluminum bar grating, corrugated
angle nosing and standard end plates, 12 1/8” wide x 30” long,
150 pcs, tagged “Project ABC”.
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
25
aluminum standard mesh bar grating
aluminum type 30
metric
standard fisholow – type 30 (Metric)
Bar grating
Aluminum Standard Mesh
Bearing Bars: 30mm centers, 6063T6
Cross Bars: 6063T5
Stock panels: 915mm nominal width x 7315mm long
METRIC LEGEND
U=Safe Uniform Load (kPa)
C=Safe Concentrated Load (kN/metre of grating width)
D=Deflection (mm)
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 82.82 MPa.
All metric dimensions are based on a “soft” conversion. For Fisholow I-bar loading, use the equivalent depth 4.8mm bar size values in this load table.
Load/
bearing Approx.
bar size Weight (kg/m2) Deflection
(mm)
25 x 3.2
9.37
25 x 4.8
13.28
32 x 3.2
11.28
32 x 4.8
16.16
38 x 3.2
13.28
38 x 4.8
18.99
45 x 4.8
21.87
51 x 4.8
24.80
57 x 4.8
27.73
64 x 4.8
30.61
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
Span in millimetres (mm)
610
762
914
1067
1219
1372
20.16
3.66
6.14
2.93
30.24
3.66
9.22
2.93
31.50
2.93
9.60
2.34
47.25
2.93
14.40
2.34
45.36
2.44
13.83
1.95
68.04
2.44
20.74
1.95
92.61
2.09
28.23
1.67
120.96
1.83
36.87
1.46
153.09
1.63
46.66
1.30
189.00
1.46
57.61
1.17
12.90
5.72
4.92
4.57
19.35
5.72
7.37
4.57
20.16
4.57
7.68
3.66
30.24
4.57
11.52
3.66
29.03
3.81
11.06
3.05
43.55
3.81
16.59
3.05
59.27
3.27
22.58
2.61
77.41
2.86
29.50
2.29
97.98
2.54
37.33
2.03
120.96
2.29
46.09
1.83
8.96
8.23
4.10
6.58
13.44
8.23
6.14
6.58
14.00
6.58
6.40
5.27
21.00
6.58
9.60
5.27
20.16
5.49
9.22
4.39
30.24
5.49
13.83
4.39
41.16
4.70
18.82
3.76
53.76
4.11
24.58
3.29
68.04
3.66
31.11
2.93
84.00
3.29
38.41
2.63
6.58
11.20
3.51
8.96
9.87
11.20
5.27
8.96
10.29
8.96
5.49
7.17
15.43
8.96
8.23
7.17
14.81
7.47
7.90
5.97
22.22
7.47
11.85
5.97
30.24
6.40
16.13
5.12
39.50
5.60
21.07
4.48
49.99
4.98
26.66
3.98
61.71
4.48
32.92
3.58
5.04
14.63
3.07
11.70
7.56
14.63
4.61
11.70
7.88
11.70
4.80
9.36
11.81
11.70
7.20
9.36
11.34
9.75
6.91
7.80
17.01
9.75
10.37
7.80
23.15
8.36
14.11
6.69
30.24
7.32
18.43
5.85
38.27
6.50
23.33
5.20
47.25
5.85
28.80
4.68
3.98
18.52
2.73
14.81
5.97
18.52
4.10
14.81
6.22
14.81
4.27
11.85
9.33
14.81
6.40
11.85
8.96
12.34
6.14
9.88
13.44
12.34
9.22
9.88
18.29
10.58
12.55
8.46
23.89
9.26
16.39
7.41
30.24
8.23
20.74
6.58
37.33
7.41
25.60
5.93
1524
1676
1829 1981
25 x 6
32 x 6
38 x 6
45 x 6
51 x 6
57 x 6
64 x 6
5.04
18.29
3.84
14.63
7.56
18.29
7.68
14.63
7.26
15.24
5.53
12.19
10.89
15.24
8.30
12.19
14.82
13.06
11.29
10.45
19.35
11.43
14.75
9.14
24.49
10.16
18.66
8.13
30.24
9.14
23.04
7.32
4.17
22.13
3.49
17.70
6.25
22.13
65.24
17.70
6.00
18.44
5.03
14.75
9.00
18.44
5.03
14.75
12.25
15.81
10.26
12.64
15.99
13.83
13.41
11.06
20.24
12.29
16.97
9.83
24.99
11.06
20.95
8.85
3.50
26.33
3.20
21.07
5.25
26.33
4.80
21.07
5.04
21.95
4.61
17.56
7.56
21.95
6.91
17.56
10.29
18.81
9.41
15.05
13.44
16.46
12.29
13.17
17.01
14.63
15.55
11.70
21.00
13.17
25.60
10.53
4.47
30.91
4.43
24.73
4.29
25.76
4.25
20.60
6.44
25.76
6.38
20.60
8.77
22.08
8.69
17.56
11.45
19.32
11.34
15.45
14.49
17.17
14.36
13.74
17.89
15.45
17.73
12.36
26
2743
3.54
5.33
3.86
35.84
4.11
28.68
3.70
29.87
3.95
23.90
5.55
29.87
5.93
23.90
7.56
25.60
8.07
20.48
9.87
22.40
10.53
17.92
12.50
19.91
13.33
15.93
15.43
17.92
16.46
14.34
8.31
3.23
34.29
3.69
27.43
4.84
34.29
5.53
27.43
6.59
29.39
7.53
23.51
8.60
25.72
9.83
20.57
10.89
22.86
12.44
18.29
13.44
20.57
15.36
16.46
2.84
39.01
3.46
31.21
4.25
39.01
5.18
31.21
5.79
33.44
7.06
26.75
7.56
29.26
9.22
23.41
9.57
26.01
11.67
20.81
11.81
23.41
14.40
18.73
2.51
44.04
3.25
35.23
3.77
44.04
4.88
35.23
5.13
37.75
6.64
30.20
6.70
33.03
8.68
26.43
8.48
29.36
10.98
23.49
10.46
26.43
13.55
21.14
22.24
49.38
3.07
39.50
3.36
49.38
4.61
39.50
4.57
42.32
6.27
33.86
5.97
37.03
8.19
29.63
7.56
32.92
10.37
26.33
9.33
29.63
12.80
23.70
8.00
11.96
16.29
21.29
26.94
33.25
Fisholow grating meets N.A.A.M.M. standards.
weights (kg/m )
9.03
11.18
12.84
14.50
16.11
18.99
19.48
2591
5.55
TYPE 18-102 TYPE 24-102 TYPE 30-102 TYPE 48-102 TYPE 60-102
11.47
13.96
16.11
18.21
20.26
22.80
23.29
2438
For serrated surface, increase depth by one size.
2
n/a
n/a
n/a
n/a
n/a
n/a
n/a
2286
Spans and loads in the pink shaded area exceed a deflection of 6mm for
uniform loads of 5kPa. Experience has shown that 6mm deflection is the
maximum deflection to give pedestrian comfort, but can be exceeded for
other types of loads at the discretion of the engineer.
I-Bar weights (metric)
bearing bar
size (mm)
2134
SECtion
modulus
PER 305mm
OF WIDTH
5.96
7.37
8.59
9.86
11.91
12.74
13.04
4.98
6.15
7.18
8.54
9.18
10.64
10.89
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
aluminum standard mesh bar grating
aluminum type 19
standard fisholow – type 19
Bearing Bars: 1 3/16“ centers, 6063T6
Cross Bars: 6063T5
Stock panels: 3’ nominal width x 24’ long
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 12,000 P.S.I.
For Fisholow I-bar loading, use the equivalent depth 3/16” bar size values in this load table.
bearing
bar size
(inches)
Load/
Deflection
Approx.
Weight
(lbs./ft.2)
1.92
1 x 3/16
2.72
1 1/4 x 1/8
2.31
1 1/4 x 3/16
3.31
1 1/2 x 1/8
2.72
1 1/2 x 3/16
3.89
1 3/4 x 3/16
4.48
2 x 3/16
5.08
2 1/4 x 3/16
5.68
2 1/2 x 3/16
6.28
2’ 0”
2’ 6”
3’ 0”
3’ 6”
4’ 0”
4’ 6”
421
0.114
421
0.115
632
0.144
632
0.115
658
0.115
658
0.092
987
0.115
987
0.092
947
0.096
947
0.077
1421
0.096
1421
0.077
1934
0.082
1934
0.066
2526
0.072
2526
0.058
3197
0.064
3197
0.051
3947
0.058
3947
0.046
269
0.225
337
0.18
404
0.225
505
0.18
421
0.18
526
0.144
632
0.18
789
0.144
606
0.150
758
0.120
909
0.15
1137
0.12
1238
0.129
1547
0.103
1617
0.113
2021
0.09
2046
0.100
2558
0.080
2526
0.090
3158
0.072
187
0.324
281
0.259
281
0.324
421
0.259
292
0.259
439
0.207
439
0.259
658
0.207
421
0.216
632
0.173
632
0.216
947
0.173
860
0.185
1289
0.148
1123
0.162
1684
0.13
1421
0.144
2132
0.115
1754
0.130
2632
0.104
137
0.441
241
0.353
206
0.441
361
0.353
215
0.353
376
0.282
322
0.353
564
0.282
309
0.294
541
0.235
464
0.294
812
0.235
632
0.252
1105
0.202
825
0.221
1444
0.176
1044
0.196
1827
0.157
1289
0.176
2256
0.141
105
0.576
211
0.461
158
0.576
316
0.461
164
0.461
329
0.369
247
0.461
493
0.369
237
0.384
474
0.307
355
0.384
711
0.307
484
0.329
967
0.263
632
0.288
1263
0.263
799
0.256
1599
0.205
987
0.230
1974
0.184
83
0.729
187
0.583
125
0.729
281
0.583
130
0.583
292
0.467
195
0.583
439
0.467
187
0.486
421
0.389
281
0.486
632
0.389
382
0.417
860
0.333
499
0.365
1123
0.292
632
0.324
1421
0.259
780
0.292
1754
0.233
5’ 0”
5’ 6”
6’ 0”
6’ 6” 7’ 0”
7’ 6”
8’ 0”
8’ 6” 9’ 0”
Spans and loads in the pink shaded area exceed a deflection of 1/4”
for uniform loads of 100 lbs/sq. ft. Experience has shown that 1/4”
deflection is the maximum deflection to give pedestrian comfort, but can
be exceeded for other types of loads at the discretion of the engineer.
87
0.871
239
0.697
130
0.871
359
0.697
125
0.726
344
0.581
188
0.726
517
0.581
256
0.622
703
0.498
334
0.545
919
0.436
423
0.484
1163
0.387
522
0.436
1435
0.348
73
1.037
219
0.829
110
1.037
329
0.829
105
0.864
316
0.691
158
0.864
474
0.691
215
0.741
645
0.592
281
0.648
842
0.518
355
0.576
1066
0.461
439
0.518
1316
0.415
0.216
0.325
For serrated surface, increase depth by one size.
105
0.720
263
0.576
158
0.720
395
0.576
152
0.600
379
0.480
227
0.6
568
0.48
309
0.514
774
0.411
404
0.45
1011
0.36
512
0.400
1279
0.320
632
0.360
1579
0.288
SECtion
modulus
PER FOOT
OF WIDTH
0.339
93
1.217
304
0.973
90
1.014
291
0.811
135
1.014
437
0.811
183
0.869
595
0.695
239
0.761
777
0.608
303
0.676
984
0.541
374
0.608
1215
0.487
81
1.411
282
1.129
77
1.176
271
0.941
116
1.176
406
0.941
158
1.008
553
0.806
206
0.882
962
0.706
261
0.784
1218
0.627
322
0.706
1128
0.564
bar grating
1 x 1/8
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
Span in Feet and inches
Aluminum Standard Mesh
IMPERIAL LEGEND
U=Safe Uniform Load (lbs./ft.2)
C=Safe Concentrated Load (lbs./foot of grating width)
D=Deflection (inches)
0.507
67
1.35
253
1.08
101
1.35
379
1.08
138
1.157
516
0.926
180
1.013
674
0.81
227
0.900
1137
0.720
281
0.81
1053
0.648
59
1.536
237
1.229
89
1.536
355
1.229
121
1.317
484
1.053
158
1.152
632
0.922
200
1.024
799
0.819
247
0.922
987
0.737
52
1.734
223
1.387
79
1.734
334
1.387
107
1.486
455
1.189
140
1.301
594
1.04
177
1.156
752
0.925
219
1.04
929
0.832
47
1.944
211
1.555
70
1.944
316
1.555
96
1.666
430
1.333
125
1.458
561
1.166
158
1.296
711
1.037
195
1.166
877
0.933
0.488
0.730
0.994
1.299
1.644
2.029
Fisholow grating meets N.A.A.M.M. standards.
I-Bar weights (imperial)
bearing bar
size (inches)
TYPE 11-4
TYPE 15-4
weights (lbs./ft )
TYPE 19-4
TYPE 30-4
TYPE 38-4
1 x 1/4
1 1/4 x 1/4
1 1/2 x 1/4
1 3/4 x 1/4
2 x 1/4
2 1/4 x 1/4
2 1/2 x 1/4
n/a
n/a
n/a
n/a
n/a
n/a
n/a
2.35
2.86
3.30
3.73
4.15
4.67
4.77
1.85
2.29
2.63
2.97
3.30
3.89
3.99
1.22
1.51
1.76
2.02
2.24
2.61
2.67
1.02
1.26
1.47
1.75
1.88
2.18
2.23
2
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
27
aluminum special mesh bar grating
aluminum special mesh
Bar grating
Aluminum Special Mesh
Aluminum Special Mesh Bar Grating is a non-stocked specialty item. For the most cost effective and readily available aluminum
bar grating option, choose Standard Fisholow Type 19-4 (Type 30-102 Metric).
special close mesh
(metric)
special close mesh
Deflections as per table on page 26.
Deflections as per table on page 27.
Type 18 Metric
Type 11
Multiply load values by 1.72 as per
table on page 26.
Multiply load values by 1.72 as per
table on page 27.
Type 18 Metric is not available
in I-bar style bearing bars.
Type 11 is not available in I-bar
style bearing bars.
Type 24
Type 15
Multiply load values by 1.25 as per
table on page 26.
Multiply load values by 1.25 as per
table on page 27.
special wide mesh
(metric)
special wide mesh
Deflections as per table on page 26.
Deflections as per table on page 27.
Type 48 Metric
Type 30
Multiply load values by 0.63 as per
table on page 26.
Multiply load values by 0.63 as per
table on page 27.
Type 60 Metric
Type 38
Multiply load values by 0.50 as per
table on page 26.
Multiply load values by 0.50 as per
table on page 27.
For panel widths, see steel panel width charts located on pages 16 and 17. All types of aluminum bar grating available up to
3 feet (915mm) nominal width.
28
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
safety grating
grip span® and shur grip®
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
29
grip span safety grating
Grip Span
grip span® information
grip span safety grating
how to order
Grip Span safety grating planks are manufactured as one-piece
constructed channels with walking surfaces consisting of
serrated edges on top of diamond shaped openings. They are:
When ordering or specifying Grip Span safety grating,
please confirm:
• available in a variety of plank widths and depths
• self cleaning
• exceptional for traction in oily, icy, or wet environments
• our most aggressive walking surface available
• The Type of Safety Grating (Grip Span = Diamond Pattern)
• Number of Diamonds or Plank Width Dimension
• Gauge
• Channel Depth
• Material – Standard Pre-Galvanized or Standard Aluminum,
or Special HRPO Steel
As with other Fisher & Ludlow grating products, complete
custom fabrication of Grip Span is available. Please contact
our nearest sales office with your fabrication requests.
Example: Fisher & Ludlow Grip Span, 4 diamond, 12 gauge,
2” channel, pre-galvanized, standard 12’ length.
OR
safety grating
Grip Span is available in:
Steel
• 14 gauge or 12 gauge Z275 galvanized (H.R.P.O. or hot
dipped galvanized by special order)
Aluminum
• 0.080” thickness from 4 3/4” to 11 3/4”, 18 3/4”,
0.100” thickness, alloy 5052 H32
Stainless Steel
• Type 304 or 316 (Select Sizes Only)
• Part Number
Example: Fisher & Ludlow Grip Span D-41220-G,
standard 12’ length
standard cross section
The following dimensions are consistent with all 6 Grip Span
plank width options, in both available gauges.
sizes available
Grip Span
width
inches
(mm)
4 3/4
(120)
7
(178)
9 1/2
(241)
11 3/4
(298)
18 3/4
(476)
24
(610)
30
Surface
Pattern
2 Diamond
3 Diamond
4 Diamond
5 Diamond
8 Diamond
10 Diamond
stock length
inches
(mm)
144
(3658)
144
(3658)
144
(3658)
144
(3658)
144
(3658)
144
(3658)
channel height
inches
(mm)
1 1/2, 2
(38, 51)
1 1/2, 2, 2 1/2, 3
(38, 51, 64, 76)
1 1/2, 2, 2 1/2, 3
(38, 51, 64, 76)
1 1/2, 2, 2 1/2, 3
(38, 51, 64, 76)
1 1/2, 2, 2 1/2, 3
(38, 51, 64, 76)
2, 3
(51,76)
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
grip span safety grating
grip span® stair treads
standard tread detail
Grip Span Stair treads
Stair treads can be fabricated from Grip Span safety grating.
End plates are welded into each end of the tread channel
to facilitate installation to stringers using bolted connections.
Treads are stocked in 24” (610mm), 30” (762mm) and
36” (914mm) lengths but any length tread can be
manufactured upon request.
How to Order
Grip Span
Note: Bolts for mounting to stringers are not included.
When ordering or specifying Grip Span treads, please confirm:
safety grating
• Type of safety grating (Grip Span = diamond pattern)
• Number of diamonds or plank width dimension
• Length of tread
• Gauge
• Channel depth
• Material – Standard Pre-Galvanized or Standard Aluminum,
or Special HRPO Steel
• Confirm if end plates are required or cut-to-length only
(for welding directly to stringers)
• Shipping and tagging instructions
Example: Fisher & Ludlow Grip Span treads, 4 diamond,
12 gauge, 2” channel, pre-galvanized, @ 3’ 0” long c/w
Fisher & Ludlow standard end plates.
End Plate Width Dimensions
“A” dimension
“B” dimension
Or
“c” dimension
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(inches)
120
178
241
298
4 3/4
7
9 1/2
11 3/4
38, 51, 76
38, 51, 76
38, 51, 76
38, 51, 76
1 1/2, 2, 3
1 1/2, 2, 3
1 1/2, 2, 3
1 1/2, 2, 3
41
89
149
206
1 5/8
3 1/2
5 7/8
8 1/8
• Part Number and Length
Example: Fisher & Ludlow Grip Span treads c/w D-41220-G @
3’ 0” long c/w Fisher & Ludlow standard end plates.
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
31
4 3/4” (120mm) –
2 diamond
grip span safety grating
Grip Span
4 3/4” (120 mm) wide – 2 diamond
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
safety grating
Steel 14 Gauge/1.8 mm
D-21415-G
1 1/2
(38.1)
2.4
(3.6)
D-21420-G
2
(50.8)
2.6
(3.9)
U
D
C
D
U
D
C
D
•
0.06
524
0.05
•
0.06
•
0.04
•
0.10
420
0.08
•
0.09
697
0.07
591
0.14
351
0.11
•
0.13
582
0.10
435
0.20
301
0.16
721
0.17
499
0.14
334
0.26
265
0.20
553
0.23
438
0.18
265
0.32
236
0.26
438
0.29
390
0.23
215
0.40
213
0.32
356
0.35
352
0.28
179
0.49
195
0.39
295
0.43
321
0.34
151
0.58
179
0.47
248
0.51
295
0.41
184
0.70
255
0.56
142
0.92
225
0.74
113
1.18
201
0.94
93
1.47
183
1.18
U
D
C
D
U
D
C
D
•
0.07
693
0.05
•
0.05
•
0.04
•
0.11
556
0.08
•
0.08
•
0.06
782
0.15
464
0.12
•
0.11
739
0.09
576
0.21
399
0.17
•
0.16
635
0.12
443
0.27
350
0.22
703
0.20
557
0.16
351
0.35
313
0.28
557
0.26
496
0.21
286
0.43
283
0.34
453
0.32
448
0.26
237
0.52
258
0.42
375
0.39
409
0.31
200
0.62
238
0.50
317
0.46
376
0.37
149
0.86
206
0.69
235
0.64
325
0.51
116
1.14
183
0.91
181
0.84
287
0.67
145
1.07
258
0.86
119
1.34
235
1.07
U
D
C
D
1461
0.08
576
0.06
935
0.13
460
0.10
647
0.18
383
0.15
475
0.25
328
0.20
363
0.33
287
0.27
286
0.42
254
0.34
231
0.52
229
0.42
191
0.63
208
0.51
Steel 12 Gauge/2.7 mm
D-21215-G
1 1/2
(38.1)
3.2
(4.8)
D-21220-G
2
(50.8)
3.6
(5.4)
Aluminum 0.080"/2.03 mm
D-20820-A
32
2
(50.8)
0.9
(1.3)
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
7” (178mm) –
3 diamond
grip span safety grating
7” (178 mm) wide – 3 diamond
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
Grip Span
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
Steel 14 Gauge/1.8 mm
1 1/2
(38.1)
3.1
(4.6)
D-31420-G
2
(50.8)
3.3
(4.9)
D-31425-G
2 1/2
(63.5)
3.8
(5.7)
U
D
C
D
U
D
C
D
U
D
C
D
•
0.06
524
0.05
•
0.06
•
0.04
•
0.04
•
0.03
577
0.10
421
0.08
•
0.09
697
0.07
•
0.06
•
0.04
402
0.14
351
0.11
665
0.13
582
0.1
763
0.08
668
0.06
269
0.20
302
0.16
490
0.17
500
0.14
562
0.11
574
0.09
227
0.26
265
0.21
376
0.23
439
0.18
431
0.14
503
0.11
180
0.33
237
0.26
298
0.29
391
0.23
342
0.18
448
0.15
147
0.40
214
0.32
242
0.35
353
0.28
277
0.23
405
0.18
122
0.49
196
0.39
201
0.43
322
0.34
230
0.27
369
0.22
103
0.59
180
0.47
169
0.51
296
0.41
194
0.33
340
0.26
125
0.71
256
0.56
144
0.45
293
0.36
97
0.93
226
0.74
111
0.59
259
0.47
77
1.19
203
0.95
89
0.76
233
0.61
63
1.49
185
1.19
73
0.94
212
0.76
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
•
0.07
694
0.05
•
0.05
•
0.04
•
0.04
•
0.03
•
0.04
•
0.03
763
0.11
556
0.08
•
0.08
•
0.06
•
0.06
•
0.05
•
0.06
•
0.04
532
0.15
465
0.12
•
0.11
740
0.09
•
0.09
•
0.07
•
0.08
•
0.06
392
0.21
400
0.17
623
0.16
636
0.12
•
0.13
•
0.10
•
0.11
•
0.09
301
0.27
352
0.22
478
0.20
558
0.16
712
0.17
•
0.13
•
0.14
•
0.11
239
0.35
314
0.28
379
0.26
498
0.21
564
0.21
740
0.17
712
0.18
•
0.14
195
0.43
284
0.34
308
0.32
450
0.26
457
0.26
667
0.21
578
0.22
•
0.18
162
0.52
260
0.42
256
0.39
410
0.31
379
0.32
608
0.25
478
0.27
767
0.22
137
0.63
240
0.50
216
0.47
378
0.37
319
0.38
558
0.30
403
0.32
705
0.26
102
0.87
208
0.69
160
0.64
327
0.51
235
0.52
481
0.41
297
0.44
606
0.35
79
1.15
185
0.92
124
0.85
289
0.68
181
0.68
423
0.54
228
0.58
533
0.46
99
1.08
260
0.87
144
0.86
378
0.69
181
0.74
476
0.59
82
1.36
238
1.09
118
1.07
343
0.86
148
0.92
431
0.73
U
D
C
D
800
0.08
601
0.08
635
0.15
480
0.12
441
0.22
399
0.17
323
0.30
3425
0.24
247
0.39
299
0.31
179
0.45
265
0.39
131
0.50
238
0.48
98
0.55
204
0.55
safety grating
D-31415-G
Steel 12 Gauge/2.7 mm
D-31215-G
1 1/2
(38.1)
4.2
(6.3)
D-31220-G
2
(50.8)
4.6
(6.8)
D-31225-G
2 1/2
(63.5)
5.1
(7.6)
D-31230-G
3
(76.2)
5.5
(8.2)
Aluminum 0.080"/2.03 mm
D-30820-A
2
(50.8)
1.2
(1.8)
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
33
9 1/2” (241mm) –
4 diamond
grip span safety grating
Grip Span
9 1/2” (241 mm) wide – 4 diamond
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
safety grating
Steel 14 Gauge/1.8 mm
D-41415-G
1 1/2
(38.1)
3.8
(5.7)
D-41420-G
2
(50.8)
4.1
(6.1)
D-41425-G
2 1/2
(63.5)
4.4
(6.5)
U
D
C
D
U
D
C
D
U
D
C
D
663
0.06
525
0.05
•
0.06
730
0.04
•
0.04
730
0.02
426
0.10
421
0.08
705
0.09
698
0.07
•
0.06
730
0.04
296
0.14
352
0.11
491
0.13
583
0.10
563
0.08
669
0.06
219
0.20
303
0.16
362
0.17
501
0.14
415
0.11
574
0.09
168
0.26
266
0.21
278
0.23
440
0.18
318
0.14
504
0.12
134
0.33
238
0.26
220
0.29
392
0.23
252
0.18
449
0.15
109
0.41
215
0.33
179
0.36
354
0.28
205
0.23
406
0.18
90
0.50
197
0.40
148
0.43
323
0.35
170
0.28
370
0.22
77
0.59
182
0.47
125
0.52
298
0.41
144
0.33
341
0.26
93
0.71
258
0.57
106
0.45
295
0.36
72
0.94
228
0.75
82
0.60
261
0.48
58
1.20
205
0.96
66
0.76
235
0.61
47
1.51
187
1.20
54
0.95
214
0.76
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
•
0.07
718
0.06
•
0.05
•
0.04
•
0.04
•
0.03
•
0.04
•
0.02
581
0.11
575
0.09
•
0.08
•
0.06
•
0.06
•
0.05
•
0.06
•
0.04
405
0.16
481
0.13
624
0.11
741
0.09
•
0.09
•
0.07
•
0.08
•
0.06
298
0.21
413
0.17
460
0.16
637
0.12
685
0.13
•
0.10
•
0.11
•
0.09
229
0.28
363
0.23
353
0.2
559
0.16
525
0.17
•
0.13
664
0.14
•
0.11
182
0.36
324
0.29
280
0.26
499
0.21
416
0.21
741
0.17
525
0.18
•
0.15
148
0.44
292
0.35
228
0.32
451
0.26
338
0.26
668
0.21
426
0.22
•
0.18
123
0.54
267
0.43
189
0.39
412
0.31
280
0.32
609
0.25
353
0.27
769
0.22
104
0.64
246
0.52
160
0.47
380
0.37
236
0.38
559
0.30
297
0.32
706
0.26
77
0.89
213
0.71
119
0.65
329
0.52
174
0.52
482
0.41
219
0.44
608
0.35
60
1.17
189
0.94
92
0.85
292
0.68
134
0.68
425
0.54
169
0.58
535
0.47
74
1.10
264
0.88
107
0.87
380
0.69
134
0.74
478
0.59
61
1.38
241
1.10
87
1.08
345
0.86
110
0.92
434
0.74
U
D
C
D
797
0.10
647
0.08
509
0.15
517
0.12
353
0.22
430
0.17
259
0.29
368
0.23
198
0.38
321
0.31
146
0.45
285
0.39
106
0.50
256
0.48
80
0.55
223
0.55
U
D
C
D
720
0.05
570
0.04
462
0.08
457
0.06
322
0.11
382
0.09
238
0.16
329
0.12
183
0.20
289
0.16
145
0.26
258
0.21
118
0.32
234
0.26
98
0.39
214
0.31
83
0.47
197
0.38
71
0.55
184
0.44
59
0.61
165
0.49
U
D
C
D
•
0.07
•
0.04
•
0.11
•
0.08
687
0.16
•
0.13
506
0.22
700
0.17
388
0.28
614
0.23
307
0.36
548
0.29
250
0.44
494
0.36
207
0.54
451
0.43
175
0.64
415
0.52
129
0.88
358
0.71
100
1.17
316
0.93
Steel 12 Gauge/2.7 mm
D-41215-G
1 1/2
(38.1)
5.1
(7.6)
D-41220-G
2
(50.8)
5.5
(8.2)
D-41225-G
2 1/2
(63.5)
5.7
(8.5)
D-41230-G
3
(76.2)
6.4
(9.5)
Aluminum 0.080"/2.03 mm
D-40820-A
2
(50.8)
1.4
(2.1)
Stainless Steel 304 16 Gauge /1.6 mm
D-44620-S
2
(50.8)
3.2
(4.8)
Stainless Steel 316 14 Gauge /1.8 mm
D-46420-S
34
2
(50.8)
3.7
(5.5)
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
11 3/4” (298mm) –
5 diamond
grip span safety grating
11 3/4” (298 mm) wide – 5 diamond
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
Grip Span
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
Steel 14 Gauge/1.8 mm
1 1/2
(38.1)
4.4
(6.5)
D-51420-G
2
(50.8)
4.7
(7.0)
D-51425-G
2 1/2
(63.5)
5.0
(7.4)
U
D
C
D
U
D
C
D
U
D
C
D
536
0.06
525
0.05
•
0.06
707
0.04
•
0.04
707
0.02
344
0.10
422
0.08
571
0.09
699
0.07
655
0.06
707
0.04
240
0.14
353
0.12
397
0.13
584
0.10
456
0.08
669
0.06
177
0.20
304
0.16
293
0.17
502
0.14
336
0.11
575
0.09
136
0.26
267
0.21
225
0.23
440
0.18
258
0.14
505
0.12
108
0.33
239
0.26
178
0.29
393
0.23
204
0.18
450
0.15
88
0.41
216
0.33
145
0.36
355
0.29
166
0.23
407
0.18
74
0.50
198
0.40
120
0.43
324
0.35
138
0.28
371
0.22
62
0.60
183
0.48
102
0.52
299
0.42
116
0.33
342
0.26
76
0.71
259
0.57
86
0.45
296
0.36
59
0.95
230
0.76
67
0.60
262
0.48
47
1.21
207
0.97
54
0.77
236
0.62
44
0.96
216
0.77
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
710
0.07
695
0.05
•
0.05
•
0.04
•
0.04
•
0.02
•
0.04
•
0.02
456
0.11
558
0.08
725
0.08
•
0.06
•
0.06
•
0.04
•
0.06
•
0.03
318
0.15
467
0.12
505
0.11
742
0.09
753
0.09
•
0.07
•
0.08
•
0.05
235
0.21
402
0.17
372
0.16
638
0.12
554
0.13
•
0.10
701
0.11
•
0.08
181
0.28
354
0.22
286
0.20
561
0.16
425
0.17
•
0.13
537
0.14
•
0.11
144
0.35
317
0.28
227
0.26
501
0.21
337
0.21
742
0.17
425
0.18
•
0.15
117
0.44
287
0.35
185
0.32
453
0.26
273
0.26
669
0.21
345
0.22
•
0.18
98
0.53
263
0.43
154
0.39
414
0.31
226
0.32
610
0.25
286
0.27
770
0.22
83
0.64
244
0.51
130
0.47
382
0.38
151
0.38
561
0.30
241
0.32
707
0.26
62
0.89
213
0.71
97
0.65
332
0.52
123
0.52
484
0.41
178
0.44
609
0.36
49
1.18
190
0.95
75
0.86
295
0.69
87
0.68
426
0.55
137
0.58
537
0.47
60
1.11
266
0.89
71
0.87
382
0.70
109
0.74
480
0.60
50
1.39
243
1.11
59
1.09
347
0.87
89
0.93
436
0.74
U
D
C
D
631
0.10
631
0.08
404
0.15
504
0.12
280
0.22
420
0.17
205
0.29
359
0.23
157
0.38
313
0.31
115
0.45
278
0.39
84
0.50
249
0.48
63
0.55
217
0.55
U
D
C
D
583
0.05
464
0.03
374
0.08
458
0.06
261
0.11
323
0.09
192
0.16
330
0.12
148
0.20
290
0.16
118
0.26
259
0.21
96
0.32
235
0.26
80
0.39
215
0.32
68
0.47
199
0.38
58
0.56
185
0.45
48
0.61
165
0.49
U
D
C
D
•
0.09
•
0.05
•
0.14
•
0.10
565
0.20
•
0.16
416
0.27
713
0.22
319
0.36
625
0.29
253
0.46
557
0.36
206
0.56
503
0.45
171
0.69
459
0.55
144
0.82
423
0.66
107
1.13
365
0.90
82
1.48
323
1.19
safety grating
D-51415-G
Steel 12 Gauge/2.7 mm
D-51215-G
1 1/2
(38.1)
6.0
(8.9)
D-51220-G
2
(50.8)
6.4
(9.5)
D-51225-G
2 1/2
(63.5)
6.8
(10.1)
D-51230-G
3
(76.2)
7.1
(10.6)
Aluminum 0.080"/2.03 mm
D-50820-A
2
(50.8)
1.6
(2.2)
Stainless Steel 304 16 Gauge /1.6 mm
D-54620-S
2
(50.8)
3.7
(5.5)
Stainless Steel 316 14 Gauge /1.8 mm
D-56420-S
2
(50.8)
4.5
(6.7)
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
35
18 3/4” (476mm) –
8 diamond
grip span safety grating
Grip Span
18 3/4” (476 mm) wide – 8 diamond
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
safety grating
Steel 14 Gauge/1.8 mm
D-81415-G
1 1/2
(38.1)
6.1
(9.1)
D-81420-G
2
(50.8)
6.3
(9.4)
D-81425-G
2 1/2
(63.5)
6.6
(9.8)
U
D
C
D
U
D
C
D
U
D
C
D
337
0.33
263
0.16
540
0.48
437
0.24
540
0.46
450
0.24
217
0.27
211
0.15
358
0.37
349
0.21
411
0.39
402
0.22
151
0.26
178
0.15
250
0.34
292
0.2
286
0.35
335
0.2
112
0.29
153
0.16
184
0.32
251
0.19
211
0.28
287
0.19
86
0.33
135
0.17
142
0.34
220
0.2
162
0.27
252
0.19
69
0.38
121
0.19
113
0.38
198
0.21
129
0.28
225
0.19
56
0.45
110
0.22
92
0.43
179
0.23
105
0.31
205
0.2
47
0.55
101
0.25
76
0.5
164
0.26
87
0.35
188
0.21
65
0.58
152
0.29
74
0.39
173
0.23
48
0.77
132
0.36
55
0.5
151
0.27
43
0.64
134
0.32
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
446
0.27
359
0.12
710
0.31
554
0.17
•
0.33
•
0.23
•
0.32
•
0.22
287
0.22
280
0.12
456
0.25
444
0.15
680
0.31
663
0.2
•
0.35
•
0.23
201
0.22
235
0.12
318
0.23
371
0.14
473
0.27
553
0.18
598
0.3
699
0.22
148
0.26
203
0.14
235
0.25
319
0.15
348
0.26
475
0.18
440
0.27
600
0.2
115
0.32
179
0.16
181
0.28
282
0.16
267
0.27
416
0.18
337
0.26
526
0.2
91
0.39
161
0.19
144
0.31
253
0.17
212
0.29
371
0.18
267
0.28
468
0.2
75
0.47
146
0.22
117
0.37
229
0.19
172
0.32
334
0.19
217
0.31
422
0.2
63
0.56
135
0.26
98
0.44
210
0.22
143
0.37
307
0.21
180
0.34
385
0.21
53
0.67
125
0.3
83
0.51
194
0.25
120
0.42
282
0.23
152
0.39
353
0.22
40
0.92
110
0.4
62
0.68
169
0.32
89
0.55
244
0.28
112
0.49
307
0.26
48
0.9
151
0.4
69
0.72
216
0.34
87
0.62
271
0.31
U
D
C
D
457
0.59
406
0.29
332
0.51
325
0.26
231
0.46
271
0.25
170
0.47
232
0.26
130
0.52
203
0.28
103
0.57
181
0.3
83
0.67
163
0.33
69
0.78
148
0.37
58
0.89
135
0.42
Steel 12 Gauge/2.7 mm
D-81215-G
1 1/2
(38.1)
8.5
(12.6)
D-81220-G
2
(50.8)
8.9
(13.2)
D-81225-G
2 1/2
(63.5)
9.2
(13.7)
D-81230-G
3
(76.2)
9.6
(14.3)
Aluminum 0.100"/2.5 mm
D-81020-A
36
2
(50.8)
2.8
(4.2)
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
55
0.9
194
0.41
69
0.78
243
0.37
45
1.12
177
0.5
57
0.96
221
0.44
24” (610mm) –
10 diamond
grip span safety grating
24” (610 mm) wide – 10 diamond
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
Grip Span
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
Steel 14 Gauge/1.8 mm
2
(50.8)
7.4
(11.0)
D-101430-G
3
(76.2)
7.9
(11.8)
U
D
C
D
U
D
C
D
300
0.46
400
0.34
300
0.42
400
0.33
300
0.48
400
0.37
300
0.43
400
0.33
228
0.42
343
0.32
300
0.46
400
0.34
168
0.38
294
0.30
264
0.44
400
0.35
128
0.38
257
0.29
202
0.39
400
0.37
102
0.41
229
0.29
160
0.36
360
0.35
82
0.44
206
0.30
130
0.35
324
0.33
68
0.49
187
0.31
107
0.36
295
0.33
57
0.55
172
0.33
90
0.39
270
0.32
42
0.70
147
0.37
66
0.45
232
0.33
51
0.54
203
0.35
40
0.65
180
0.38
U
D
C
D
U
D
C
D
475
0.40
650
0.26
475
0.38
•
0.34
416
0.39
520
0.22
475
0.39
•
0.35
289
0.33
434
0.19
475
0.42
•
0.33
212
0.31
372
0.20
392
0.38
686
0.29
162
0.31
325
0.20
300
0.36
600
0.27
128
0.34
289
0.21
237
0.34
534
0.26
104
0.38
260
0.22
192
0.35
480
0.26
86
0.44
237
0.23
159
0.37
437
0.26
72
0.48
217
0.25
133
0.39
400
0.26
53
0.63
186
0.31
98
0.47
343
0.29
75
0.58
300
0.32
59
0.70
267
0.36
safety grating
D-101420-G
Steel 12 Gauge/2.7 mm
D-101220-G
2
(50.8)
10.4
(15.5)
D-101230-G
3
(76.2)
11.1
(16.5)
48
0.85
240
0.41
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
37
24” (610mm) –
walkway
grip span safety grating
Grip Span
24” (610 mm) wide walkway– 10 diamond
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
safety grating
Steel 14 Gauge/1.8 mm
DW-101450-G
5
(127)
9.6
(14.3)
U
D
C
D
300
0.41
400
0.32
300
0.41
400
0.33
300
0.42
400
0.33
300
0.45
400
0.33
300
0.48
400
0.34
263
0.47
400
0.35
213
0.42
400
0.36
176
0.40
400
0.38
148
0.40
400
0.39
109
0.43
380
0.42
83
0.47
333
0.41
66
0.55
296
0.42
53
0.64
266
0.44
13.1
(19.5)
U
D
C
D
475
0.37
900
0.34
475
0.37
900
0.34
475
0.38
900
0.35
475
0.40
900
0.35
475
0.43
900
0.36
420
0.43
900
0.37
340
0.39
850
0.37
281
0.37
773
0.35
236
0.37
709
0.34
173
0.39
607
0.33
133
0.44
531
0.33
105
0.51
472
0.35
85
0.59
425
0.37
Steel 12 Gauge/2.7 mm
DW-101250-G
5
(127)
Grip Span Walkway Channel
Grip Span Walkway channels offer the same slip resistant
properties and self-cleaning advantages of other Grip Span
planks with the added feature of having built in kick-plates
along both sides of the channel length. The 5” toe boards
are integral parts of the channel and prevent tools and other
materials from falling over the edge of a catwalk.
38
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
shur grip safety grating
shur grip® information
shur grip safety grating
how to order
Shur Grip safety grating planks are manufactured as one-piece
constructed channels with walking surfaces consisting of
debossed holes each surrounded by 6 perforated buttons.
Benefits include:
When ordering or specifying Shur Grip safety grating,
please confirm:
As with other Fisher & Ludlow grating products, complete
custom fabrication of Shur Grip is available. Please contact
our nearest sales office with your fabrication requests.
Shur Grip is available in:
Example: Fisher & Ludlow Shur Grip, 6 hole, 11 gauge,
2” channel, pre-galvanized, standard 12’ length.
OR
• 13 gauge or 11 gauge Z275 galvanized (H.R.P.O. or
hot dipped galvanized by special order)
Aluminum
• 0.125” thickness, alloy 5052 H32 available in
2” channel only
Example: Fisher & Ludlow Shur Grip S-61220-G,
standard 12’ length
standard cross section
The following dimensions are consistent with all 6 Shur Grip
plank width options, in both available gauges.
safety grating
• Part Number
Steel
Shur Grip
• available in a variety of plank widths and depths
• superior self-cleaning design prevents build-up of snow
or debris
• exceptional traction in oily, icy, or wet environments
• The Type of Safety Grating (Shur Grip = Round Hole Pattern)
• Number of Holes or Plank Width Dimension
• Gauge
• Channel Depth
• Material – Standard Pre-Galvanized or Standard Aluminum,
or Special HRPO Steel or Stainless Steel
sizes available
shur Grip
width
inches
(mm)
5
(127)
7
(178)
10
(254)
12
(305)
18
(457)
24
(610)
Surface
Pattern
2 Hole
3 Hole
5 Hole
6 Hole
10 Hole
13 Hole
stock length
inches
(mm)
144
(3658)
144
(3658)
144
(3658)
144
(3658)
144
(3658)
144
(3658)
channel height
inches
(mm)
1 1/2, 2
(38, 51)
1 1/2, 2, 3
(38, 51, 76)
1 1/2, 2, 3
(38, 51, 76)
1 1/2, 2, 3
(38, 51, 76)
1 1/2, 2, 3
(38, 51, 76)
2, 3
(51, 76)
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
39
shur grip safety grating
shur grip® stair treads
standard tread detail
Shur Grip Stair treads
Stair treads can be fabricated from Shur Grip safety grating.
End plates are welded into the each end of the tread channel
to facilitate installation to stringers using bolted connections.
Shur Grip
Treads are stocked in 24” (610mm), 30” (762mm) and
36” (914mm) lengths but any length tread can be
manufactured upon request.
Note: Bolts for mounting to stringers are not included.
How to Order
When ordering or specifying Shur Grip treads, please confirm:
safety grating
• Type of safety grating (Shur Grip = round hole pattern)
• Number of holes or plank width dimension
• Length of tread
• Gauge
• Channel depth
• Material – Standard Pre-Galvanized or Standard Aluminum,
or Special HRPO Steel
• Confirm if end plates are required or cut-to-length only
(for welding directly to stringers)
• Shipping and tagging instructions
Example: Fisher & Ludlow Shur Grip treads, 6 hole, 11 gauge,
2” channel, pre-galvanized, @ 3’ 0” long c/w Fisher & Ludlow
standard end plates.
Or
End Plate Width Dimensions
“A” dimension
40
“B” dimension
“c” dimension
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(inches)
METRIC
(mm)
IMPERIAL
(inches)
127
178
254
305
5
7
10
12
38, 51, 76
38, 51, 76
38, 51, 76
38, 51, 76
1 1/2, 2, 3
1 1/2, 2, 3
1 1/2, 2, 3
1 1/2, 2, 3
41
89
149
206
1 5/8
3 1/2
5 7/8
8 1/8
• Part Number and Length
Example: Fisher & Ludlow Shur Grip treads c/w S-61120-G @
3’ 0” long c/w Fisher & Ludlow standard end plates.
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
shur grip safety grating
5” (127mm) – 2 hole
5” (127 mm) wide – 2 hole
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
Shur Grip
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
Steel 13 Gauge/2.2 mm
1 1/2
(38.1)
2.6
(3.8)
S-21320-G
2
(50.8)
2.9
(4.3)
U
D
C
D
U
D
C
D
•
•
911
0.14
569
0.12
•
856
0.05
•
684
0.08
•
•
•
849
0.09
•
•
•
•
831
0.09
692
0.14
668
0.20
487
0.16
997
0.16
727
0.13
510
0.26
425
0.20
762
0.21
635
0.16
402
0.32
377
0.26
601
0.26
563
0.21
324
0.40
338
0.32
486
0.32
506
0.26
267
0.48
306
0.39
400
0.39
459
0.31
224
0.57
280
0.46
335
0.46
419
0.37
238
0.61
245
0.62
357
0.50
813
0.23
593
0.18
622
0.30
518
0.24
491
0.38
460
0.30
397
0.47
414
0.38
328
0.57
375
0.45
275
0.7
344
0.54
294
0.73
206
0.79
186
0.80
310
0.64
274
0.81
244
0.99
Aluminum 0.125"/3.2 mm
S-21820-A
2
(50.8)
1.4
(2.0)
U
D
C
D
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
safety grating
S-21315-G
41
shur grip safety grating
7” (178mm) – 3 hole
Shur Grip
7” (178 mm) wide – 3 hole
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
safety grating
Steel 13 Gauge/2.2 mm
S-31315-G
1 1/2
(38.1)
3.0
(4.5)
S-31320-G
2
(50.8)
3.4
(5.0)
U
D
C
D
U
D
C
D
•
•
921
0.04
•
736
0.07
•
•
•
•
•
•
700
0.12
612
0.10
•
904
0.09
513
0.17
524
0.13
758
0.15
774
0.12
392
0.22
457
0.17
579
0.20
676
0.16
309
0.27
405
0.22
457
0.25
600
0.20
249
0.34
363
0.24
369
0.31
538
0.25
205
0.41
329
0.33
304
0.38
488
0.30
172
0.48
300
0.39
255
0.45
446
0.36
125
0.65
255
0.52
186
0.61
380
0.48
95
0.84
221
0.67
141
0.78
330
0.63
•
946
0.08
•
899
0.14
786
0.11
•
659
0.19
672
0.15
•
•
•
•
•
•
•
•
•
503
0.25
587
0.20
789
0.20
920
0.16
•
396
0.32
520
0.25
622
0.26
816
0.20
•
•
•
•
•
•
•
320
0.39
466
0.31
502
0.31
733
0.25
916
0.21
•
263
0.47
422
0.37
414
0.38
664
0.30
756
0.25
•
220
0.55
385
0.44
347
0.45
607
0.36
634
0.30
•
160
0.75
327
0.60
253
0.616
517
0.49
464
0.40
947
0.32
283
0.77
192
0.79
449
0.63
354
0.53
825
0.42
•
•
•
931
0.09
886
0.17
775
0.14
650
0.23
664
0.18
497
0.30
580
0.24
392
0.38
515
0.30
317
0.47
463
0.38
262
0.57
420
0.45
385
0.54
329
0.73
72
1.02
290
0.79
259
0.96
Steel 11 Gauge/3.0 mm
S-31115-G
1 1/2
(38.1)
4.2
(6.3)
S-31120-G
2
(50.8)
4.6
(6.8)
S-31130-G
3
(76.2)
4.8
(7.1)
U
D
C
D
U
D
C
D
U
D
C
D
Aluminum 0.125”/3.2 mm
S-31820-A
42
194
0.84
2
(50.8)
1.6
(2.4)
U
D
C
D
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
248
0.96
395
0.79
278
0.66
730
0.53
352
0.97
224
0.81
653
0.65
shur grip safety grating
10” (254mm) – 5 hole
10” (254 mm) wide – 5 hole
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
Shur Grip
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
Steel 13 Gauge/2.2 mm
1 1/2
(38.1)
3.5
(5.2)
S-51320-G
2
(50.8)
3.9
(5.8)
U
D
C
D
U
D
C
D
•
974
0.04
•
747
0.09
778
0.07
•
518
0.12
647
0.10
781
0.11
976
0.08
379
0.17
553
0.13
573
0.14
835
0.11
290
0.22
483
0.17
437
0.19
729
0.15
228
0.28
428
0.22
345
0.24
647
0.19
184
0.34
384
0.27
279
0.29
580
0.23
152
0.41
347
0.33
230
0.35
526
0.28
127
0.48
317
0.39
192
0.42
481
0.33
92
0.65
269
0.52
140
0.56
409
0.45
70
0.84
233
0.67
106
0.73
355
0.58
204
0.84
83
0.91
312
0.73
•
•
278
0.89
•
•
917
0.09
955
0.08
•
635
0.14
794
0.11
•
•
•
•
466
0.18
679
0.15
762
0.15
•
•
•
•
•
355
0.24
592
0.19
582
0.20
971
0.16
•
•
•
•
•
•
280
0.30
525
0.24
459
0.25
861
0.20
815
0.15
•
226
0.37
470
0.30
371
0.30
773
0.24
660
0.21
•
186
0.45
426
0.36
306
0.37
701
0.29
544
0.25
•
155
0.53
389
0.43
256
0.43
641
0.35
456
0.29
•
113
0.72
330
0.57
187
0.59
545
0.47
334
0.40
974
0.32
285
0.74
142
0.76
473
0.61
255
0.52
848
0.41
250
0.92
111
0.96
417
0.76
200
0.65
750
0.52
372
0.93
161
0.80
671
0.64
•
879
0.13
916
0.11
610
0.19
762
0.15
448
0.26
653
0.21
342
0.34
570
0.27
270
0.43
506
0.35
218
0.53
455
0.43
413
0.52
378
0.61
181
1.02
Steel 11 Gauge/3.0 mm
S-51115-G
1 1/2
(38.1)
4.6
(6.8)
S-51120-G
2
(50.8)
4.8
(7.1)
S-51130-G
3
(76.2)
5.2
(7.7)
U
D
C
D
U
D
C
D
U
D
C
D
•
safety grating
S-51315-G
Aluminum 0.125"/3.2 mm
S-51820-A
2
(50.8)
1.9
(2.8)
U
D
C
D
•
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
43
shur grip safety grating
12” (305mm) – 6 hole
Shur Grip
12” (305 mm) wide – 6 hole
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
safety grating
Steel 13 Gauge/2.2 mm
S-61315-G
1 1/2
(38.1)
4.4
(6.5)
S-61320-G
2
(50.8)
4.6
(6.8)
U
D
C
D
U
D
C
D
•
683
0.09
854
0.07
983
0.07
•
473
0.13
710
0.10
681
0.10
•
347
0.17
607
0.14
500
0.14
874
0.11
265
0.23
529
0.18
382
0.18
763
0.14
208
0.28
469
0.23
301
0.22
676
0.18
168
0.35
420
0.28
243
0.27
607
0.22
138
0.42
380
0.34
200
0.33
550
0.26
116
0.50
347
0.40
167
0.39
502
0.31
84
0.67
294
0.54
122
0.53
427
0.42
63
0.86
254
0.69
93
0.69
370
0.55
222
0.86
72
0.86
325
0.69
197
1.05
58
1.05
289
0.84
•
767
0.09
959
0.07
•
•
•
531
0.13
797
0.10
870
0.14
•
389
0.18
681
0.14
638
0.19
•
•
•
•
•
•
•
•
•
297
0.23
594
0.19
487
0.25
974
0.20
946
0.14
•
234
0.29
526
0.23
384
0.31
864
0.25
746
0.18
•
188
0.36
471
0.29
310
0.38
775
0.31
604
0.22
•
155
0.43
426
0.35
256
0.46
703
0.37
498
0.27
•
130
0.51
389
0.41
214
0.55
642
0.44
418
0.32
•
94
0.69
329
0.55
156
0.74
546
0.59
305
0.43
•
73
0.92
284
0.71
120
0.99
473
0.76
233
0.56
931
0.45
248
0.88
96
1.25
417
0.96
183
0.71
822
0.57
219
1.07
77
1.56
385
1.20
147
0.87
735
0.69
•
805
0.15
•
559
0.21
838
0.17
410
0.29
717
0.23
313
0.37
627
0.30
247
0.47
556
0.38
500
0.47
454
0.56
•
•
•
Steel 11 Gauge/3.0 mm
S-61115-G
1 1/2
(38.1)
5.4
(8.0)
S-61120-G
2
(50.8)
5.5
(8.2)
S-61130-G
3
(76.2)
6.2
(9.2)
U
D
C
D
U
D
C
D
U
D
C
D
•
•
Aluminum 0.125"/3.2 mm
S-61820-A
44
2
(50.8)
2.2
(3.3)
U
D
C
D
•
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
shur grip safety grating
18” (457mm) – 10 hole
18” (457 mm) wide – 10 hole
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
Shur Grip
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
Steel 13 Gauge/2.2 mm
1 1/2
(38.1)
5.7
(8.4)
S-101320-G
2
(50.8)
6.0
(8.9)
U
D
C
D
U
D
C
D
641
0.05
480
0.02
641
0.03
480
0.01
441
0.10
480
0.04
641
0.07
480
0.02
307
0.14
480
0.08
460
0.11
480
0.04
226
0.19
480
0.12
339
0.15
480
0.06
174
0.25
480
0.18
260
0.19
480
0.09
138
0.31
466
0.25
206
0.24
480
0.13
112
0.39
421
0.31
168
0.30
480
0.18
93
0.47
385
0.38
139
0.36
480
0.24
79
0.56
355
0.45
117
0.43
480
0.32
59
0.78
304
0.61
87
0.60
456
0.48
46
1.03
266
0.80
67
0.79
399
0.62
53
1.01
355
0.78
43
1.26
319
1.06
U
D
C
D
U
D
C
D
U
D
C
D
752
0.06
1116
0.04
1207
0.05
1116
0.03
1488
0.02
1116
0.01
483
0.09
904
0.07
773
0.08
1116
0.05
1488
0.04
1116
0.01
336
0.13
755
0.10
538
0.12
1116
0.09
1153
0.07
1116
0.02
247
0.17
649
0.14
396
0.16
1039
0.13
847
0.1
1116
0.04
190
0.23
570
0.18
304
0.21
911
0.17
649
0.13
1116
0.06
151
0.29
509
0.23
241
0.26
812
0.21
512
0.15
1116
0.08
123
0.36
460
0.29
195
0.33
733
0.26
415
0.19
1116
0.11
102
0.44
420
0.35
162
0.40
668
0.32
343
0.23
1116
0.14
86
0.52
387
0.42
137
0.47
615
0.38
288
0.27
1116
0.19
64
0.72
335
0.58
101
0.65
531
0.52
212
0.37
1116
0.30
50
0.95
297
0.76
78
0.85
469
0.68
162
0.48
973
0.39
62
1.09
421
0.87
128
0.61
865
0.49
51
1.36
383
1.09
104
0.76
778
0.60
U
D
C
D
792
0.08
594
0.03
581
0.13
594
0.06
360
0.19
594
0.11
265
0.25
594
0.17
203
0.33
594
0.26
160
0.42
630
0.38
130
0.52
567
0.48
108
0.63
515
0.58
91
0.75
472
0.70
Steel 11 Gauge/3.0 mm
S-101115-G
1 1/2
(38.1)
6.8
(10.1)
S-101120-G
2
(50.8)
7.1
(10.6)
S-101130-G
3
(76.2)
7.9
(11.7)
safety grating
S-101315-G
Aluminum 0.125”/3.2 mm
S-101820-A
2
(50.8)
2.8
(4.2)
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
45
shur grip safety grating
24” (610mm) – 13 hole
Shur Grip
24” (610 mm) wide – 13 hole
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
safety grating
Steel 11 Gauge/3.0 mm
46
S-131120-G
2
(50.8)
8.9
(13.2)
S-131130-G
3
(76.2)
9.8
(14.6)
U
D
C
D
U
D
C
D
524
0.03
524
0.01
524
0.01
524
0.00
524
0.07
524
0.02
524
0.02
524
0.01
467
0.13
524
0.04
524
0.04
524
0.01
344
0.17
524
0.06
524
0.07
524
0.02
264
0.23
524
0.09
473
0.11
524
0.03
209
0.29
524
0.13
374
0.14
524
0.04
170
0.36
524
0.16
304
0.18
524
0.05
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
141
0.43
524
0.24
252
0.22
524
0.07
119
0.52
524
0.31
212
0.26
524
0.08
88
0.71
524
0.48
156
0.35
524
0.13
68
0.94
524
0.72
120
0.46
524
0.20
54
1.20
489
0.96
96
0.59
524
0.29
44
1.50
445
1.20
78
0.73
524
0.39
shur grip safety grating
walkway
24” (610 mm), 30” (762 mm) and 36” (914 mm) wide walkway
Allowable Loads and Deflections
Spans to the left of the blue shaded area produce deflections of less than 1/4" for uniform loads of 100 lbs./ft.2
Part
Number
Channel Approx. Load/
Depth
Weight Deflection
inches
(mm)
lb/lin. ft.
(kg/m)
Single Span Condition
in Feet & inches and in Millimeters (mm)
Shur Grip
LEGEND
U=Uniform Load (lb./ft.2)
C=Concentrated Load (lb.)
D=Deflection (in.)
• =Denotes span will carry in excess of 800 lbs.
2' 0"
2' 6"
3' 0"
3' 6"
4' 0"
4' 6"
5' 0"
5' 6"
6' 0"
7' 0"
8' 0"
9' 0"
10' 0"
610 mm 762 mm 914 mm 1067 mm 1219 mm 1372 mm 1524 mm 1676 mm 1829 mm 2134 mm 2438 mm 2743 mm 3048 mm
Steel 13 Gauge/2.2 mm – 24” WIDE
5
(127)
8.7
(12.9)
U
D
C
D
355
0.00
355
0.00
355
0.00
355
0.00
355
0.01
355
0.00
355
0.02
355
0.00
355
0.03
355
0.01
355
0.05
355
0.01
355
0.07
355
0.01
355
0.10
355
0.02
355
0.15
355
0.02
346
0.26
355
0.03
245
0.35
355
0.05
209
0.44
355
0.07
169
0.53
355
0.09
U
D
C
D
657
0.00
657
0.00
657
0.01
657
0.00
657
0.01
657
0.00
657
0.02
657
0.00
657
0.03
657
0.01
657
0.05
657
0.01
657
0.08
657
0.01
657
0.12
657
0.02
619
0.16
657
0.02
455
0.22
657
0.04
348
0.29
657
0.05
275
0.37
657
0.08
223
0.45
657
0.11
U
D
C
D
384
0.00
480
0.00
384
0.01
480
0.00
384
0.01
480
0.00
384
0.02
480
0.00
384
0.04
480
0.01
384
0.06
480
0.01
384
0.09
480
0.01
384
0.16
480
0.02
384
0.2
480
0.02
306
0.26
480
0.04
234
0.34
480
0.06
185
0.45
480
0.08
150
0.55
480
0.11
U
D
C
D
185
0.00
273
0.00
185
0.00
273
0.00
185
0.01
273
0.00
185
0.01
273
0.00
185
0.02
273
0.00
185
0.04
273
0.01
185
0.06
273
0.01
185
0.09
273
0.01
185
0.12
273
0.02
185
0.22
273
0.03
185
0.38
273
0.04
158
0.52
273
0.05
128
0.65
273
0.07
Steel 11 Gauge/3.0 mm – 24” WIDE
SW-131150-G
5
(127)
11.8
(17.5)
Steel 11 Gauge/3.0 mm – 30” WIDE
SW-151150-G
5
(127)
14.2
(20.2)
safety grating
SW-131350-G
Steel 11 Gauge/3.0 mm – 36” WIDE
SW-191150-G
5
(127)
15.9
(23.7)
Shur Grip Walkway Channel
Walkway channels offer the same slip resistant properties and
self-cleaning advantages of other Shur Grip planks with the
added feature of having built in kick-plates along both sides
of the channel length. The 5” toe boards are integral parts of
the channel and prevent tools and other materials from falling
over the edge of a catwalk.
Available in 24”, 30”, and 36” wide options.
*For 30” and 36” wide walkway, width dimension refers
to total overall channel width. For 24” wide walkway,
width dimension refers to the walking surface width.
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
47
shur grip safety grating
SHUR STEP® SAFETY FLOORING
LADDER RUNGS
Standard Stock
Standard Stock
Sheets are 36” x 120” (914mm x 3048mm)
Length 60” (1524 mm)
Available in:
Available in:
• HRPO Steel
11 gauge, 5.0 lbs. ft2
13 gauge, 3.8 lbs. ft2
• 13 gauge HRPO Steel
• 0.125” thick Aluminum
• 16 gauge Type 304 Stainless Steel
• Aluminum 5052-H32
0.125” thick, 1.6 lbs./ft2
safety grating
Shur Grip
safety flooring and ladder rungs
2 hole
3 hole
4 hole
Type
2 Hole
3 Hole
4 Hole
48
width
inches
(mm)
1 1/4
(32mm)
1 5/8
(41mm)
2 1/4
(57mm)
Height
inches
(mm)
1 13/32
(36mm)
1 1/8
(29mm)
1 1/2
(38mm)
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
Weight
Per Foot (Per Metre)
HRPO steel
1.2 lbs
(1.8kg)
1.3 lbs
(1.9kg)
1.5 lbs
(2.2kg)
Aluminum
0.6 lbs
(0.9kg)
0.5 lbs
(0.7kg)
0.7 lbs
(1.0kg)
304
Stainless Steel
0.8 lbs
(1.2kg)
0.8 lbs
(1.2kg)
1.2 lbs
(1.8kg)
fiberglass reinforced plastic (frp) grating
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
49
molded frp grating
molded frp information
FRP grating
Molded FRP
molded Fibreglass reinforced plastic
(FRP) grating
Molded Fiberglass Reinforced Plastic (FRP) Grating is
manufactured in an open, heated mold. Continuous E-glass
fibers are interwoven in alternating layers while being
completely wetted out with thermosetting resin systems.
This continuous process produces an integral, one piece
construction which provides resilience and bi-directional
strength. Although the concave profile of standard plain
surface Molded FRP Grating provides excellent anti-skid
properties, an integral grit surface can be supplied for
additional slip resistance. Other benefits include:
How to Order Molded FRP Grating
• Corrosion Resistant
• Non-Rusting
• Fire-Retardant
• Non-Conductive
• Light Weight
• Easy to Install
• Unlimited Color Options
When ordering or specifying Molded FRP Grating,
please confirm:
• Type
• Resin
• Color
• Top Surface
• Sheet Size
Fabrication
As with our other grating products, Fisher & Ludlow offers
full fabrication services with FRP grating. We can also supply
a variety of FRP structural shapes that may be associated with
an FRP grating project. Please call us to discuss any of your
custom platform and stair requirements.
molded frp grating resin systems
Type
AN*
AF*
FF
IF
CF
CR+
Description
Architectural Grade
Non Fire Retardant
Architectural Grade
Fire Retardant
Food Grade
Fire Retardant
Industrial Grade
Fire Retardant
Chemical Proof
Fire Retardant
Chemical Proof
Fire Retardant Plus
Resin
Corrosion
Resistance
flame spread
rating
Orthophthalic
Good
Not Rated
Orthophthalic
Good
Class 1:25 or Less
Isophthalic
Very Good
Class 2:30 or Less
Isophthalic
Very Good
Class 1:25 or Less
Vinyl Ester
Excellent
Class 1:25 or Less
Vinyl Ester
Excellent
Class 1:10 or Less
Example: Fisher & Ludlow Molded FRP 1 1/2” deep square
mesh, AN (Architectural Grade, Non Fire Retardant), dark grey,
grit top, 4’ x 12’ sheets
installation
FRP grating sheet size and lightweight construction permit
simple and economical installation. Fasteners, supports and
hold-down clips permit total flexibility in achieving the desired
configuration of the final installation.
Conventional hand tools such as a hack saw, sabre saw, band
saw or disc saw with metal cutting blade can be used to cut
grating on-site and to cut around special openings as required.
Cut ends should be treated with Edge Sealing Kits.
*Stocked at most warehouses in dark grey color, grit top or smooth top.
50
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
molded frp grating
molded frp types
1” rectangular mesh
1” square mesh
1 1/2” square mesh
2” square mesh
1” x 4” x 1”
(25mm x 100mm x 25mm)
1 1/2” x 1 1/2” x 1”
(38mm x 38mm x 25mm)
1 1/2” x 1 1/2” x 1 1/2”
(38mm x 38mm x 38mm)
2” x 2” x 2”
(51mm x 51mm x 51mm)
Approx.
Weight
lbs./ft.2
(kg/m2)
Approx. bearing bar size
shipping
inches (mm)
weight
WIDTH SPACE C-C
lbs. (kg)
WIDTH
SPACE C-C
Top surface
149
(67.5)
93
(42)
5/16
(8)
5/16
(8)
1
(25)
1
(25)
5/16
(8)
5/16
(8)
4
(100)
4
(100)
Plain or
Grip Top
Plain or
Grip Top
120
(55)
75
(34)
1/4
(6)
1/4
(6)
1 1/2
(38)
1 1/2
(38)
1/4
(6)
1/4
(6)
1 1/2
(38)
1 1/2
(38)
Plain or
Grip Top
Plain or
Grip Top
180
(82)
111
(50)
1/4
(6)
1/4
(6)
1 1/2
(38)
1 1/2
(38)
1/4
(6)
1/4
(6)
1 1/2
(38)
1 1/2
(38)
Plain or
Grip Top
Plain or
Grip Top
192
(87)
1/4
(6)
2
(51)
1/4
(6)
2
(51)
Plain or
Grip Top
% open area
59%
59%
FRP grating
1” Rectangular Mesh
4’ x 12’
3.1
(1220 x 3658) (15.13)
3’ x 10’
3.1
(915 x 3048) (15.13)
1” Square Mesh
4’ x 12’
2.5
(1220 x 3658) (12.2)
3’ x 10’
2.5
(915 x 3048)
(12.2)
1 1/2” Square Mesh
4’ x 12’
3.7
(1220 x 3658) (18.1)
3’ x 10’
3.7
(915 x 3048)
(18.1)
2” Square Mesh
4’ x 12’
4
(1220 x 3658) (19.53)
Cross bar size
inches (mm)
Molded FRP
Panel size
feet
(mm)
70%
70%
70%
70%
72%
Molded FRP grating meets O.S.H.A. specifications 1910.23 paragraph (a) 9.
METRIC LEGEND
U=Safe Uniform Load (kg/m2)
C=Safe Concentrated Load
(kg/m of grating width)
D=Deflection (mm)
Allowable Loads and Deflections
IMPERIAL LEGEND
U=Safe Uniform Load (lb./ft.2)
C=Safe Concentrated Load
(lbs./ft of grating width)
D=Deflection (in.)
Loads below are based on a minimum safety factor of 3 or maximum deflection of 1% of the span.
style
1”
Square Mesh
1”
Rectangular
Mesh
1 1/2”
Square Mesh
2”
Square Mesh
Load/
Deflection
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
span in MILLIMETRES (mm)
300
450
600
900
1200
13652
3
2567
3
18578
3
3411
3
30837
3
5133
3
29744*
3
4462*
3
4045
5
1141
5
5505
5
1516
5
9137
5
2563
5
13282
5
4183
5
1706
6
642
6
2322
6
853
6
3855
6
1442
6
5600
6
2974
6
506
9
285
9
688
9
379
9
1142
9
641
9
1656
9
1403
9
213
12
160
12
290
12
213
12
482
12
360
12
682
12
846
12
*Represents Shear Force Governs
style
Load/
Deflection
1525
1”
Square Mesh
1”
Rectangular
Mesh
235
15
223
15
282
15
581
15
1 1/2”
Square Mesh
2”
Square Mesh
U
D
C
D
U
D
C
D
U
D
C
D
U
D
C
D
span in inches
12"
18"
24"
36"
48"
60"
2662
0.120
1667
0.120
3623
0.120
2222
0.120
6013
0.120
3889
0.120
5800*
0.120
2900
0.120
789
0.180
741
0.180
1073
0.180
988
0.180
1782
0.180
1667
0.180
2590
0.180
2719
0.180
333
0.240
417
0.240
453
0.240
556
0.240
752
0.240
938
0.240
1092
0.240
1933
0.240
99
0.360
185
0.360
134
0.360
247
0.360
223
0.360
417
0.360
323
0.360
912
0.360
42
0.480
104
0.480
57
0.480
139
0.480
94
0.480
234
0.480
133
0.480
550
0.480
48
0.600
150
0.600
55
0.600
378
0.600
*Represents Shear Force Governs
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
51
pultruded frp grating
Pultruded FRP
pultruded frp information
PULTRUDED FRP GRATING
Pultruded FRP Resins
Pultruded FRP Grating has all the benefits of Molded FRP
Grating including corrosion resistance, high strength to weight
ratio, and ease of installation. With its high fiberglass content
and I-bar or T-bar style bearing bars, Pultruded FRP Grating
has increased unidirectional strength and stiffness to
accommodate longer span conditions. Pultruded FRP Gratings
are offered in a variety of bar profiles and spacings, including
close mesh options that are designed for non-motorized wheel
traffic and ADA compliance.
Pultruded FRP grating is available in two resin bases –
Isophthalic Polyester and Vinyl Ester. Isophthalic Polyester
resin is ideal for most industrial applications and is available
in standard light grey, yellow, or green. Vinyl Ester resin offers
superior corrosion resistance and comes standard dark grey.
Both are fire retardant with ASTM E84 flame spread rating
Class 1:25 or less.
Pultruded FRP grating types
Custom colors are also available.
FRP grating
Pultruded FRP I-Bar Types
Standard panel sizes are 4’ x 20’ (1219mm x 6096mm),
however custom panel sizes are available.
How to Order Pultruded FRP Grating
When ordering or specifying Pultruded FRP Grating,
please confirm:
part
number
Approx.
Weight
“X” Dimension
OPen space
“Y” Dimension % open
Load Bar Centers area
METRIC IMperial metric IMperial metric IMperial
(inches)
(mm)
(inches)
(kg/m2) (lbs./ft.2) (mm)
I-BAR 1” Deep
I-4010
17.57
I-5010
14.74
I-6010
11.37
I-BAR 1 1/4” Deep
I-4012
18.40
I-6012
13.03
I-BAR 1 1/2” Deep
I-4015
21.97
I-5015
18.16
I-6015
16.11
• Type
• Resin
• Color
• Top Surface
• Sheet Size
3.60
3.02
2.33
10
15
23
0.4
0.6
0.9
25
30
38
1.0
1.2
1.5
40%
50%
60%
Example: Fisher & Ludlow Pultruded FRP I-6015
(I-bar 60% open, 1 1/2” deep), Vinyl Ester resin
(Chemical Grade, Fire Retardant), dark grey, grit top,
standard 4’ x 20’ sheets
3.77
2.67
10
23
0.4
0.9
25
38
1.0
1.5
40%
60%
load table information
4.50
3.72
3.30
10
15
23
0.4
0.6
0.9
25
30
38
1.0
1.2
1.5
40%
50%
60%
Load Tables Available Upon Request
Pultruded FRP T-Bar Types
part
number
Approx.
Weight
“X” Dimension
OPen space
“Y” Dimension % open
Load Bar Centers area
METRIC IMperial metric IMperial metric IMperial
(inches)
(mm)
(inches)
(kg/m2) (lbs./ft.2) (mm)
T-BAR 2” Deep
T-3320
21.67
T-5020
16.74
52
4.44
3.43
13
25
0.5
1.0
38
51
1.5
2.0
33%
50%
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
grating fastening methods
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
53
grating fastening methods
grating fastening methods
Bar Grating Fastening Methods
fastening methods information
BAR GRATING fasteners
Type D Saddle Clip
(complete with stainless steel self tapping screw)
Type D Saddle Clip
(complete with C-clamp and bolt)
Our most common and cost-effective fastening method.
Simply pre-drill a hole into the supporting member and drive
in the self-tapping screw. Designed for use with Tru-Weld Type
19 and Type 15 bar grating only (in 1/8” and 3/16” bar sizes).
Eliminates the need to drill supports or have access beneath
the grating during installation. The C-clamp slides between
the bearing bars to clamp the flange of the supporting
member and is tightened from above using a hex-driver.
For use with Tru-Weld Type 19 and Type 15 bar grating only
(in 1/8” and 3/16” bar sizes).
Available in standard galvanized or bare steel and stainless
steel options.
Type D Saddle Clip
(complete with nut, bolt, and bottom clamp)
This combination allows for fastening grating without drilling
into the supports. The Type D Saddle Clip holds the grating
from the top as the bottom clamp is tightened under the
flange of the supporting member. Designed for use with
Tru-Weld Type 19 and Type 15 bar grating only (in 1/8” and
3/16” bar sizes).
Available in standard galvanized or bare steel and stainless
steel options.
54
Available in standard galvanized or bare steel and stainless
steel options.
Type B Clamping Bolt, Nut, and Bottom Clamp
For close mesh Type 11 and Type 9.5 grating, a square collared
clamping bolt can be inserted directly between the ends of the
bearing bars and fitted through a bottom clamp. The rounded
bolt head rests directly on the bearing bars eliminating the
need for a top saddle clip.
Available by special order in bare steel, galvanized, and
stainless steel.
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
grating fastening methods
Safety Grating Fastening Methods
SAFETY GRATING fasteners
Grip Span Clip Assemblies
Shur Grip Clip Assemblies
Mid Span Support Clip
grating fastening methods
Galvanized Grip Span anchors may be used in conjunction
with a nut, bolt and washer or a stainless stell self-tapping
screw if drilling through the supporting member. Alternatively,
Grip Span anchors may be used with an S-clip and bolt to
clamp to the flange of a support structure (no drilling required).
Mid Span Support Clips are used to adjoin either Shur Grip
or Grip Span planks together along the length of the channel.
Come complete with 2 1/2” x 3/8” tap bolts.
Galvanized Shur Grip anchors may be used in conjunction
with a nut, bolt, and washer or a stainless steel self-tapping
screw if drilling through the supporting member. Alternatively,
Shur Grip anchors may be used with an S-clip and bolt to
clamp to the flange of a support structure (no drilling required).
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
55
molded FRP GRATING
PULTRUDED FRP GRATING
Molded FRP Clip Assembly
Lower Flange Clip Assembly
grating fastening methods
FRP Grating Fastening Methods
grating fastening methods
Offers a fastening solution for below-surface attachment
of pultruded grating. Includes FRP Lower Flange Clamp and
hardware. This style of clip should be used in pairs on either
side of the pultruded grating bar being clamped.
Comes complete with a stainless steel top “M” bracket
with nut, bolt, and washer to suit molded FRP style and
depth. When ordering, please specify style of molded FRP
being fastened.
56
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
expanded metal
steel and aluminum
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
57
expanded metal
expanded metal information
EXPANDED METAL
Expanded Metal is manufactured from carbon steel or
aluminum sheets that are simultaneously slit and stretched
to create diamond shaped openings. The original metal sheet
may be expanded as much as 4 times its original length,
but is sheared down to stock sheet sizes.
expanded metal
• Light weight and strength make expanded metal an
extremely versatile material
• Ideal for partitions, enclosures, barriers, filters, walkways,
grilles, and machine guards
• Available in Raised or Flattened styles in a variety of gauges
and opening sizes to fit any application
• Standard sheets in stock for immediate shipment
• Custom Shearing available
Raised Expanded Metal
Expanded Metal Terminology
• Short Way of Design (SWD)
Nominal dimension
• Long Way of Design (LWD)
Nominal dimension – When referring to a sheet size the
SWD is always referred to before the LWD. For example a
“4 x 8 sheet” is 4 feet in the SWD direction and 8 feet in
the LWD direction.
• Short Way of Opening (SWO)
• Long Way of Opening (LWO)
• Strand Thickness
Gauge thickness of the original base metal sheet prior
to expanding.
Expanded Metal sizes showing the abbreviation “R” are
considered to be Raised Expanded Metal.
• Strand Width
Amount of metal fed under dies to produce one strand.
Raised Expanded Metal is a finished product as it comes from
the press. The strands and bonds are set at a uniform angle to
the plane of the sheet. This gives added strength and rigidity,
as well as a skid resistant surface.
• Bond Shearing
Cutting expanded metal to size with the shear line falling
through the bonds. The result is an edge configuration of all
closed diamonds. For bond shearing the resultant dimensions
must be in a multiple of the full diamond dimensions.
Flattened Expanded Metal
Expanded Metal sizes with the abbreviation “F” are
designated Flattened Expanded Metal.
Flattened Expanded Metal has been cold rolled after the
expansion process to provide a smooth, flat, and level sheet.
The flattening process reduces the original gauge of the base
metal and the strand width increases slightly.
• Random Shearing
The shear line falls at random points on the diamond mesh
pattern. Edges are open and diamonds are not matched.
Random shearing is necessary when the required overall
dimensions are not a multiple of the full diamond dimensions.
Expanded Metal Grating
Fisher & Ludlow manufactures two sizes of Expanded Metal
Grating, 3 lb. Grating and 4 lb. Grating. This style of Raised
Expanded Metal is produced from heavier gauge carbon steel
plates. Expanded Metal Grating is ideal for pedestrian traffic
and applications requiring heavier loads or larger openings
than conventional expanded metal options.
58
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
expanded metal
How to Order Expanded Metal
Expanded Metal Diagrams
When ordering or specifying Expanded Metal, please confirm:
• The Style
• Flattened or Raised
• Material
• Sheet Size
Example: Fisher & Ludlow Expanded Metal 3/4” # 9 Flattened,
carbon steel, standard 4’ x 8’ sheet.
expanded metal
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
59
expanded metal
raised expanded metal
All weights and dimensions are approximate.
IMPERIAL MEASUREMENTS
expanded metal
Raised
style
60
Carbon Steel
1/2” – #20R
1/2” – #18R
1/2” – #16R
Approx. Weight
(lbs./100 SF)
SHEET SIZE
(feet)
C-C of Bond
(inches)
opening size
(inches)
strand size
(inches)
PLAIN
Galvanized
SWD
LWD
SWD
LWD
SWD
LWD
WIDTH
THICKNESS
43
70
86
54
88
104
4,8
4,8
4,8
8,4
8,4
8,4
0.500
0.500
0.500
1.200
1.200
1.200
0.438
0.440
0.375
0.938
0.938
0.938
0.072
0.088
0.086
0.036
0.048
0.060
approx.
open area (%)
thickness of sheet
(inches)
80
72
65
0.140
0.172
0.175
1/2” – #13R
147
174
4,8
8,10,4
0.500
1.200
0.312
0.938
0.096
0.092
57
0.204
1/2” – #13 (0.188)R
3/4” – #16R
3/4” – #13R
3/4” – #10 (13)R
3/4” – #9R
1” – #16R
1” – #14R
1” – #12R
1” – #10 (170)R
1” – #10HR
1” – #7R
1 1/2” – #18R
1 1/2” – #16R
1 1/2” – #13R
1 1/2” – #10 (13)R
1 1/2” – #10R
1 1/2” – #10HR
1 1/2” – #9R
1 1/2” – #6R
3 lb. Grating
4 lb. Grating
Aluminum
A 1/2” – .051R
A 1/2” – .081R
A 3/4” – .051R
A 3/4” – .081LR
A 3/4” – .081HR
A 3/4” – .125R
A 1 1/2” – .081R
A 1 1/2” – .125R
282
54
80
120
180
44
78
102
170
200
412
20
40
60
79
170
200
120
250
300
400
310
61
94
134
198
51
90
110
187
221
453
25
48
68
89
187
220
131
273
315
420
4,8
4,8
4,8
4,8
48
4,8
4,8
4,8
4,8
4,8
8
4,8
4,8
4,8
4,8
4,8
4,8
4,8
8
8,10
8
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,10,4
8,10,4
4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
4
3,4
4,3
0.500
0.923
0.923
0.923
0.923
1.000
1.000
1.000
1.000
1.000
1.000
1.330
1.330
1.330
1.330
1.330
1.330
1.330
1.330
1.330
1.330
1.200
2.000
2.000
2.000
2.000
2.250
2.250
2.250
2.250
2.250
2.250
3.000
3.000
3.000
3.000
3.000
3.000
3.000
3.000
5.330
5.330
0.250
0.813
0.750
0.750
0.688
1.000
0.875
0.907
0.750
0.725
0.576
1.313
1.250
1.188
1.188
1.000
0.830
1.125
1.000
0.940
0.940
0.800
1.750
1.688
1.625
1.563
2.063
1.563
1.563
1.563
1.563
1.563
2.625
2.625
2.500
2.500
2.375
2.375
2.375
2.313
3.440
3.440
0.188
0.099
0.096
0.144
0.148
0.096
0.125
0.109
0.155
0.180
0.275
0.067
0.107
0.104
0.137
0.200
0.240
0.142
0.201
0.264
0.300
0.092
0.060
0.092
0.092
0.134
0.060
0.074
0.105
0.135
0.135
0.183
0.048
0.060
0.092
0.092
0.135
0.135
0.134
0.198
0.183
0.215
25
78
76
72
68
82
75
78
62
60
45
90
85
85
80
74
72
76
69
60
55
0.275
0.210
0.205
0.290
0.312
0.192
0.225
0.225
0.375
0.390
0.550
0.140
0.230
0.242
0.284
0.350
0.460
0.312
0.433
0.540
0.618
4,8
4,8
4,8
4,8
4,8
4,8
4,8
4,8
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
0.500
0.500
0.923
0.923
0.923
0.923
1.330
1.330
1.200
1.200
2.000
2.000
2.000
2.000
3.000
3.000
0.375
0.375
0.812
0.750
0.750
0.687
1.187
1.187
0.937
0.937
1.750
1.680
1.680
1.680
2.500
2.500
0.093
0.096
0.109
0.129
0.165
0.169
0.128
0.162
0.051
0.081
0.051
0.081
0.081
0.125
0.081
0.125
65
60
78
76
69
68
85
79
0.158
0.186
0.200
0.220
0.300
0.305
0.240
0.300
27
44
17
32
41
65
22
43
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
expanded metal
flattened expanded metal
All weights and dimensions are approximate.
IMPERIAL MEASUREMENTS
Approx. Weight
(lbs./100 SF)
SHEET SIZE
(feet)
C-C of Bond
(inches)
opening size
(inches)
strand size
(inches)
approx.
open area (%)
thickness of sheet
(inches)
65
60
63
0.029
0.039
0.050
Galvanized
SWD
LWD
SWD
LWD
SWD
LWD
WIDTH
THICKNESS
40
66
82
51
83
98
4,8
4,8
4,8
8,4
8,4
8,4
0.500
0.500
0.500
1.250
1.250
1.250
0.375
0.312
0.312
1.000
1.000
1.000
0.079
0.097
0.096
0.029
0.039
0.050
1/2” – #13F
140
161
4,8
8,4
0.500
1.250
0.265
1.000
0.107
0.070
52
0.070
51
75
114
171
41
63
98
165
38
57
165
114
57
88
128
188
50
72
113
179
46
66
179
125
4,8
4,8
4,8
4,8
4,8
4,8
4,8
4,8
4,8
4,8
4,8
4,8
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
0.923
0.923
0.923
0.923
1.000
1.000
1.000
1.000
1.330
1.330
1.330
1.330
2.100
2.100
2.100
2.100
2.300
2.300
2.300
2.300
3.200
3.200
3.200
3.200
0.750
0.688
0.637
0.563
0.813
0.790
0.785
0.750
1.062
1.062
0.900
1.000
1.750
1.781
1.755
1.688
2.250
2.000
2.000
1.900
2.750
2.750
2.560
2.563
0.111
0.106
0.160
0.165
0.098
0.125
0.156
0.160
0.119
0.116
0.188
0.158
0.048
0.070
0.070
0.120
0.050
0.070
0.085
0.110
0.048
0.070
0.110
0.110
74
74
68
63
78
80
74
58
83
80
63
75
0.048
0.070
0.070
0.120
0.050
0.070
0.085
0.110
0.048
0.070
0.110
0.110
4,8
4,8
4,8
4,8
4,8
4,8
4,8
4,8
8,4
8,4
8,4
8,4
8,4
8,4
8,4
8,4
0.500
0.500
0.923
0.923
0.923
0.923
1.330
1.330
1.270
1.270
2.125
2.125
2.125
2.125
3.150
3.150
0.312
0.312
0.750
0.687
0.687
0.625
1.062
1.000
1.000
1.000
1.812
1.750
1.750
1.750
2.750
2.750
0.104
0.105
0.122
0.143
0.181
0.187
0.143
0.181
0.040
0.060
0.040
0.070
0.070
0.095
0.055
0.080
61
58
72
70
63
62
77
70
0.040
0.060
0.040
0.070
0.070
0.095
0.055
0.080
3/4” – #16F
3/4” – #13F
3/4” – #10 (13)F
3/4” – #9F
1” – #16F
1” – #14F
1” – #12F
1” – #10F
1 1/2” – #16F
1 1/2” – #13F
1 1/2” – #10F
1 1/2” – #9F
Aluminum
A 1/2” – .051F
A 1/2” – .081F
A 3/4” – .051F
A 3/4” – .081LF
A 3/4” – .081HF
A 3/4” – .125F
A 1 1/2” – .081F
A 1 1/2” – .125F
26
42
16
30
39
62
21
41
www.fisherludlow.com 1-800-334-2047 (USA) 1-800-268-6277 (Canada) < fisher & ludLow
expanded metal
PLAIN
Carbon Steel
1/2” – #20F
1/2” – #18F
1/2” – #16F
Flattened
style
61
expanded metal
expanded metal
expanded metal versatility
62
fisher & ludLow > 1-800-268-6277 (Canada) 1-800-334-2047 (USA) www.fisherludlow.com
the nucor family
fortune 500 and beyond
Fisher & Ludlow and its parent company, Harris Steel Group, are proud to be a part of the Nucor family of companies.
Nucor combines the resources of more than 90 steel companies and the talent of over 20,000 team members.
Products and services range from raw steel production and structural steel shapes to a variety of steel products
such as, rebar, fasteners, wire rod, wire mesh, joists, metal building systems, brokerage, and of course, grating
and expanded metal.
Nucor fosters a culture of corporate responsibility by empowering its employees to share their ideas and seek
out best practices between all of its company divisions. The result … Nucor is an industry leader in workplace
safety, environmental protection, and community stewardship. Nucor is also the largest steel recycler in the
Western Hemisphere.
To learn more about Nucor and what we can do for you, please visit www.nucor.com.
CANADA
UNITED STATES
Ontario (Head Office)
ISO 9001-2008 Certified
750 Appleby Line
PO Box 5025
Burlington, ON L7R 3Y8
Tel: 905-632-2121
Fax: 905-632-6295
Illinois
1501 Eilerman Avenue
Litchfield, Il 62056
Tel: 1-800-334-2047
Alberta
17527 - 107 Avenue
Edmonton, AB T5S 1E5
Tel: 780-481-3941
Fax: 780-481-3967
4609 - 64 Avenue
Wetaskiwin, AB T9A 2G4
Tel: 1-800-268-6277
British Columbia
19511 - 92 Avenue
Surrey, BC V4N 4G6
Tel: 604-888-0911
Fax: 604-888-0383
Quebec
12450 Boul. Industriel
Montreal (P.A.T.), QC H1B 5M5
Tel: 514-640-5085
Fax: 514-640-1115
Kentucky
8059 Dixie Highway
Florence, KY 41042
Tel: 859-282-7767
Fax: 859-282-7702
Mississippi
211 Industrial Drive
Madison, MS 39110
Tel: 1-800-334-2047
North Carolina
4816 Worth Place
Charlotte, NC 28216
Tel: 1-800-334-2047
Pennsylvania
2000 Corporate Drive, Suite 400
Wexford, PA 15090
Tel: 724-934-5320
Fax: 724-934-5350
607 Erie Street
Saegertown, PA 16433
Tel: 1-800-334-2047
The Lockhart Complex
River Road Bldg 12B
McKees Rocks, PA 15136
Tel: 1-800-334-2047
Proud member of N.A.A.M.M.
Fisher & Ludlow reserves the right to improve all product
designs and modify or change information in this
publication without notice. The symbols ® designate
Canadian and United States of America registered
trade-mark status. The following are trade-marks
of Fisher & Ludlow, a Division of Harris Steel Limited:
Tru-Weld, Flowforge, Fisholow, Shur Step, Shur Grip, and
Grip Span. Fisher & Ludlow has additional registered
trade-marks in Canada and the United States of America.
Contact Us
1-800-268-6277 (Canada)
1-800-334-2047 (United States)
www.fisherludlow.com
[email protected]
Printed January 2014

Similar documents

Metal Reference Guide

Metal Reference Guide Founded in 1985, Metal Supermarkets is the world’s largest supplier of small quantity metals. Our 70 plus locations in Canada, the United States and United Kingdom are dedicated to providing just i...

More information