Metering Handwash Faucet - deltacommercialfaucets.com
Transcription
Metering Handwash Faucet - deltacommercialfaucets.com
Metering Handwash Faucet SPECIFICATION: (example) • HEAVY-DUTY CAST BRASS single hole mount faucet • Polished chrome plated finish • Vandal Resistant Brass Handle activator • Delta® metering slow close cartridge • Two Body mounted stainless steel Anti-Rotation locking pins • Vandal resistant spout outlet • Total flow not to exceed 0.25 gallon per handle activation 86T1104 87T104 ❏ 87T104 With Push Button SPECIFICATION: (example) ❏ 86T1104 • Single hole mount faucet • Polished chrome plated finish • Vandal Resistant brass push button • Delta® metering slow close cartridge • Vandal resistant spout outlet • Total flow not to exceed 0.25 gallon per handle activation ❏ 87T105 With Lever Handle ADA compliant requires less than 5 lbs. operating force (Formerly 86T Series) ❏ 86T0104 • Same as 86T1104 but with (86T151) 4'' cast brass, polished chrome plated coverplate COVERPLATE 87T111 SPECIFICATION: (example) ❏ 87T151 with center faucet hole, two holdown shanks • HEAVY DUTY FORGED CAST BRASS • 102mm (4'') center • Polished chrome plated finish • With locating holes for 87T104, 87T105, 87T110 and 87T111 metering faucets with anti-rotation locking pins • For secure Public Washroom Faucet/Fixture Installations SPECIFICATION: (example) • HEAVY-DUTY CAST BRASS single hole mount faucet • Polished chrome plated finish • Vandal Resistant Brass Handle activator • Delta® metering slow close cartridge • Two Body mounted stainless steel Anti-Rotation locking pins • Mixing tee and inlet checks • Vandal resistant spout outlet • Total flow not to exceed 0.25 gallon per handle activation ❏ 87T110 With Push Button ❏ 87T111 With Lever Handle ADA compliant requires less than 5 lbs. operating force (Formerly 86T Series) 87T151 Engineer/Architect Approval Model Specified: Approval: Date: Refer to www.specselect.comfor individual models. Flowrates are at 60 PSI. Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 6.C.1 Metering Handwash Faucet Approvals: • CSA certified 87T104 - 87T111 - LOCKING PINS • Complies to ASME A112.18.1 • Lever Handle ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) 87T111 FLOWRATE vs PRESSURE 87T151 86T1104 108mm (4.25”) 89mm (3.5”) 51mm (2.0”) 25mm (1.0”) 56mm (2.2”) 29mm (1.13”) MAX. DECK THICKNESS 41mm (1.62”) INLETS - 1/2'' MIP/Coupling Nuts Note: Measurements may vary ± 6mm (0.25'') Refer to www.specselect.comfor individual models. DSP-87T Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Mixing Metering Handwash Faucet Specification: (example) • HEAVY-DUTY CAST BRASS • Two handle mixing metering faucet • Vandal resistant handle actuator • Vandal resistant spout outlet • Polished chrome plated finish • Delta® metering slow close cartridge • Total flow not to exceed 0.25 gallon per handle activation and ... with ... (add product variation required) with ... (add handle required) 86T1350 86T1153 Engineer/Architect Approval Model Specified: Approval: DESCRIPTION Date: PRODUCT NO. Mixing Metering Handwash Faucet 86T1 PRODUCT VARIATION ® 5 HANDLE OUTLET ✔ ✔ ✔ 0 102mm (4'') Centerset with Open Grid Strainer 0 0 1 102mm (4'') Centerset less Pop-up 1 1 2 2 3 3 4 4 2 3 Widespread Faucet, Cast Spout, less Pop-up 4 Vandal Resistant 0.5 USGPM (1.9 L/min) Flow Control NonAerating Spray Outlet ✔ 5 5 6 6 6 7 7 7 8 8 8 9 9 9 Refer to www.specselect.comfor individual models. Vandal Resistant Push Button (For Product Variation No. 3 Only) Vandal Resistant ADA Lever Handle (For Product Variation No’s 0, & 1 Only) 5 Flowrates are at 60 PSI. Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 6.C.2 Mixing Metering Handwash Faucet Approvals: 86T1153 • CSA certified • Complies to ASME Standard A112.18.1 • Lever Handle No. 3 ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) FLOWRATE vs PRESSURE 86T1350 152-406mm (6.0"-16.0") 51mm 66mm (2.0") (2.6") 52mm (2.06") L C D 10 o 51mm (2.0") 32mm (1.25") 3 HOLES 114mm (4.5") 27mm (1.06") MAX. 44mm (1.75") INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR 1/2-14 NPSM COUPLING NUT (SUPPLIED) 1/2" IPS ADAPTER 508mm (20") S.S. CONNECTORS OPEN GRID STRAINER (supplied with Product Variation 0) CAST SPOUT OUTLET NO. mm in. 5 11 0.45 “D” Use of check valves or check stops is recommended to prevent possible cross-flow. SPOUT ASSEMBLIES DIMENSIONS Note: Measurements may vary ± 6mm (0.25'') Refer to www.specselect.comfor individual models. DSP-86T SPOUT TYPE Cast Spout “A” mm in. 114 4.5 “C” “L” mm in. mm in. 15 0.6 51 2 Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Metering Urinal Valve for Washdown Urinals SPECIFICATION: (example) • HEAVY-DUTY, back inlet supply • CAST BRASS valve for 3/4'' IP spud urinal • Polished chrome plated finish • Delta® metering slow close cartridge • Chrome plated union inlet stop • Brass oscillating lever handle, coupling nuts, inlet cover tube • Set screw wall flange, spud flange, outlet tube • 1/2'' universal FIP/copper sweat inlet For Washdown Urinals 86T505 ❏ 86T505 SPECIFICATION: (example) • HEAVY-DUTY, back inlet supply • CAST BRASS valve for 3/4'' IP spud urinal • Polished chrome plated finish • Delta® metering slow close cartridge • Chrome plated brass coupling nuts, inlet cover tube • Wall flange, spud flange, outlet tube • 1/2'' universal FIP/copper sweat inlet For Washdown Urinals 86T500 ❏ 86T500 with vandal resistant brass push button ❏ 86T502 with brass oscillating lever handle SPECIFICATION: (example) • HEAVY-DUTY, top inlet supply • CAST BRASS valve for 3/4'' IP spud urinal • Polished chrome plated finish • Delta® metering slow close cartridge • Chrome plated brass coupling nuts, spud flange, outlet tube • 1/2'' universal FIP/copper sweat inlet For Washdown Urinals 86T503 ❏ 86T501 with vandal resistant brass push button ❏ 86T503 with brass oscillating lever handle SPECIFICATION: (example) Vacuum breaker assembly for above urinal valves ❏ 86T610 86T610 Engineer/Architect Approval Model Specified: Approval: Date: Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 6.C.3 Metering Urinal Valve for Washdown Urinals Approvals: • CSA certified 86T505 • Lever Handle ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. 121mm (4.75") • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) 57mm (2.25") 1/2” FIP/ COPPER SWEAT INLET 292mm (11.5") FLOWRATE vs PRESSURE FLOW (l /min.) FLOW (USGPM) 20 5 15 4 TOP OF FIXTURE 3 10 2 5 1 0 0 10 20 30 40 50 60 70 0 80 90 100 86T505 with 86T610 Line Pressure (psig) 121mm (4.75") OF FIXTURE Extensions Available for Inlet Centers and for Outlet Tube Heights 1/2" FIP/ COPPER SWEAT INLET 324mm (12.75") TOP OF FIXTURE INLETS - 1/2'' FIP/Copper Note: Measurements may vary ± 6mm (0.25'') Refer to www.specselect.com for individual models. DSP–86T505 Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Lavatory Faucets HDF® ■ Single Handle ■ Slow Self-Closing ■ Deck Mount Basin Faucet ■ Single Hole Sink Applications STANDARD SPECIFICATIONS: • Single handle, slow self-closing faucet. For single hole deck mount applications. 701-HDF / 701-COLHDF • Solid brass fabricated body. • Metering, vandal resistant, slow-close push handle. Submitted Model No.:_______________________________________________ Specific Features: __________________________________________________ Plain (701-HDF) Cold (701-COLHDF) • 4 1/4" (108 mm) rigid spout. • .5 gpm (1.9 L/min) vandal resistant spray outlet. Total flow per actuation must not exceed .25 gal./cycle (1.0 L/cycle). • All operating parts must be replaceable from above the deck. • 1/2"-14 NPSM threaded male inlet shank. 4 3/4" (120.6 mm) 3 1/2" (89 mm) 4 1/4" (108 mm) 2" (51 mm) 2" (51 mm) 1/2"-14 NPSM UP ® C ® COMPLIES WITH: • ASME A112.18.1 • CSA B125 • IAPMO Listed • CSA Certified • ASHRAE 90-80 6 0 69 138 Pressure (kPa) 207 276 345 414 483 552 621 22.7 18.9 5 15.1 4 11.4 3 7.6 2 3.8 1 0 Flow (Liters Per Minute) Flow (U.S. Gallons Per Minute) 1 1/8" (29 mm) Max. Deck Thickness 1 1/2" (38 mm) 0 10 20 30 40 50 60 Pressure (PSI) 70 80 90 0 Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP-701-HDF Rev. D Page 6.C.4 Lavatory Faucets HDF® ■ Two Handle ■ Deck Mount ■ 2 and 3 Hole Sink Applications ■ 4" (102 mm) Centerset STANDARD SPECIFICATIONS: • Two-handle slow self-closing faucets. For two and 2507-HDF three hole deck mount applications. 2517-HDF Submitted Model No.:_______________________________________________ Specific Features: __________________________________________________ 1" (25 mm) Max. Deck Thickness • 4" (102 mm) centerset. • 3 7/16" (87 mm) long spout. • Metering, vandal resistant, slow-close push handle. • No lift rod hole. • Metal grid strainer (2517). • .5 gpm (1.9 L/min) vandal resistant spray outlet. Total flow per actuation must not exceed .25 gal./cycle (1.0 L/cycle). • All operating parts must be replaceable from above the deck. • 1/2"-14 NPSM threaded male inlet shanks. 4" (102 mm) 3 7/16" (87 mm) 2 5/8" (67 mm) 1 3/8" (35 mm) UP 1/2"-14 NPSM 2" (51 mm) 2 1/8" (54 mm) Dia. 4" (102 mm) 6" (152 mm) ® C ® 2" (51 mm) COMPLIES WITH: • ASME A112.18.1 • CSA B125 • IAPMO Listed • CSA Certified 1 5/8" (42 mm) to 2 3/8" (61 mm) 1 1/4" (32 mm) Dia. METAL GRID STRAINER 6 0 69 138 Pressure (kPa) 207 276 345 414 483 552 621 22.7 18.9 5 15.1 4 11.4 3 7.6 2 3.8 1 0 Flow (Liters Per Minute) 8" (203 mm) Flow (U.S. Gallons Per Minute) 1 3/8" (35 mm) Dia. 0 10 20 30 40 50 60 Pressure (PSI) 70 80 90 0 Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 6.C.5 DSP-2507-HDF Rev. D Lavatory Faucets HDF® ■ Two Handle ■ Widespread ■ Slow Self-Closing ■ Three Hole Sink Applications ■ 6"-16" (152 mm-406 mm) Centers STANDARD SPECIFICATIONS: • Two handle, slow self-closing faucets for three 3514-WFHDF hole deck mount applications. Submitted Model No.:_______________________________________________ Specific Features: __________________________________________________ 1 1/8" (29 mm) Max. Deck Thickness 2 1/16" (52 mm) 7 5/8" (194 mm) 6"-16" (152 mm-406 mm) Centers 1" (25 mm) Dia. Flexible Hose Connection 1/2"-14 NPSM 2 1/4" (57 mm) 4 3/4" (121 mm) 2" (51 mm) Dia. 7 5/16" (186 mm) 3/8" O.D. Copper Tubing 1 1/8" (29 mm) Dia. • Widespread 6"-16" (152 mm-406 mm) centers. • Solid brass fabricated end valve and spout bodies. • No lift rod hole. • Metal grid strainer. • Metering, vandal resistant, slow-close push handles. • 4 3/4" (121 mm) long, rigid spout. • .5 gpm (1.9 L/min) vandal resistant spray outlet. Total flow per actuation must not exceed .25 gal./cycle (1.0 L/cycle). • All operating parts must be replaceable from above the deck. • 3/8" O.D. copper supply tube inlets with 1/2"-14 NPSM adapters. 2 1/8" (54 mm) Dia. 1 5/8" (42 mm) to 2 3/8" (61 mm) 1 3/8" (35 mm) Dia. UP 8" (203 mm) 1 1/4" (32 mm) Dia. C ® COMPLIES WITH: • ASME A112.18.1 • CSA B125 • ASHRAE 90-80 • IAPMO Listed • CSA Certified 6 0 69 138 Pressure (kPa) 207 276 345 414 483 552 621 22.7 18.9 5 15.1 4 11.4 3 7.6 2 3.8 1 0 Flow (Liters Per Minute) Flow (U.S. Gallons Per Minute) 3514-WFHDF ® 0 10 20 30 40 50 60 Pressure (PSI) 70 80 90 0 Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP-3514-HDF Rev. B Page 6.C.6