Enerlin`x - Schneider Electric

Transcription

Enerlin'x
Communication system for Smart Panels
Enerlin’X
The communication system for Smart Panels
Contents
Presentation........................................................................... p. 4
"Smart Panel" concept . .....................................................................................p. 4
Ethernet with connected switchboards...............................................................p. 6
Enerlin’X communication system........................................................................p. 8
Application examples.......................................................... p. 10
Energy monitoring of a group of bank branches..................................................p. 12
Energy monitoring, asset management, maintenance of a hotel..........................p. 16
Smart Panel design.............................................................. p. 20
Locate sources of useful information in the switchboard.....................................p. 22
Masterpact , Compact NSp. 24
Compact NSX ...................................................................................................p.26
Acti 9.................................................................................................................p. 28
Enerlin’X gateways and interfaces connectivity...................................................p. 30
Examples of connected switchboards architecture ............................................p. 31
Enerlin’X components......................................................... p. 32
Enerlin’X communication system........................................................................p. 34
Energy Server Com'X 200p. 36
FDM128 switchboard display.............................................................................p. 38
FDM121 switchboard display.............................................................................p. 40
IFE interface, IFE interface + gateway: Ethernet interface, gateway.....................p. 42
Acti 9 Smartlink..................................................................................................p. 44
IFM Modbus communication interface................................................................p. 50
I/O application module.......................................................................................p. 52
Design and monitoring tools............................................. p. 54
Electrical Asset Manager Software......................................................................p. 56
Acti 9 Smart Test software for PC.......................................................................p. 58
Index of commercial references...................................... p. 60
Meters and auxiliaries overview for 'Measure' function........................................p. 62
Index of commercial references..........................................................................p. 63
3
Energy management
has never been simpler
Simple-to-install Smart Panels connect your building
to real savings in 3 steps
Measure
Embedded and stand-alone
metering & control capabilities
Connect
> Integrated communication
interfaces
> Ready to connect to energy
management platforms
Smart Panels connect you to energy savings
4
Save
> Data-driven energy efficiency actions
> Real time monitoring and control
> Access to energy and site
information through on-line services
Measure
'Smart Panels' mean
visible information
Grouping and measuring most of the electrical
protection, command and metering components,
the switchboards are now significant sources
of data locally displayed and sent via
communication networks.
CLOUD
connect
… and ready to be linked
to expertise
Smart Panels use reliable, simple to install and
use displays, and, Ethernet and Modbus interfaces
on the Enerlin’X communication system.
Information is safely transmitted through
most efficient networks:
• Modbus SL inside switchboards, between
components
• Ethernet, on cable or WiFi, inside the building
and connecting switchboards to computers
• Ethernet on DSL or GPRS, for access to
on-line services by Schneider Electric
Energy experts, wherever they are, are now
able to provide advises based on permanently
updated data of the building.
Save
CLOUD
On-site real time
monitoring and control
On a touch screen display connected
to Ethernet
• Shows essential electrical information and
alarms concerning the electrical network,
• Allows control (open, close, reset…) of
various equipments
This touch screen is well appreciated for real
time value checking and control, directly on
the front panel of the main switchboard
On a PC display with common browser
• Shows monitoring web pages hosted
into the local Ethernet interfaces
• Alarm events generate automatic email
notifications
• Allows control (open, close, reset…) of
various equipments
Data displayed on graphics or recorded into
files are of a great interest for optimizing the use
of energy in the building.
As an example, they definitely help validating the
change of temperature settings, time scheduling
in a Building Management System or other
automated devices.
On-line Energy
Management services
StruXureWare Energy Operation
automates data collection via an open,
scalable, and secure energy management
information system.
With the help of the Schneider Electric energy
management services team, data is then
turned into actionable information to enable
customers to understand their facilities’
performance on an ongoing basis.
Energy Operation leverages companies’ current
investments in their existing systems, and can
be used to communicate advanced results and
performance to a broad audience for a shared
understanding throughout the organization.
Cloud based energy computing can also help
analyze performance of multi site locations and
optimize energy consumption.
5
All your energy data available
via Ethernet with connected
switchboards
From conventional…
Common panel indicators only show a basic view
of the reality.
In today's context, this solution becomes
inadequate, as advanced dashboards are
required for energy efficiency and optimization.
… to connected
measurement
This dashboard is generated by a Schneider
Electric online service hosted in a web server.
Energy consumption, circuit protection status,
equipment activity, are collected in every
switchboard of the building for this purpose.
Ethernet today is the most adapted media
for carrying large amount of data between
electrical distribution systems to either
local touch screens or distant servers
"IP connected" switchboards
have become a key factor of
evolution in energy management
and continuity of service.
6
Ethernet connected
switchboards
Ethernet:
> Widely used in buildings, easy to wire
Ethernet network is widely distributed to multiple
users in buildings. A simple RJ45 socket is
required to connect each switchboard.
> No additional installation and
maintenance friendly
Is also available in buildings and well appreciated
by operators during operation and maintenance.
> Access from any PC or Ethernet
FDM128 monitor
• PC: with common Internet Browser
• FDM 128: installed on the front panel or at any
remote location of the building
Ethernet makes "Smart Grid ready"
switchboards
A new energy management
rs
me
su
n
Co
s
icle
> Interactions Generation - Consumption
ork
etw
n
y
ilit
Ut
The Smart Grid principle creates fine interactions
between consumers and facilities that produce
l
tia
en
sid
Re
h
ve
energy strategy. Ethernet and responsiveness of
building automation greatly limit the impact on the
operating availability of equipment.
on
uti
b
The
tri
Dis
ma majo
r
n
imp agem ecolo
ion
iss
l
e
(wi men ent o gical
sm
n
nd, ta f po sta
Tra
t
k
The solar ion o wer es le
ble s
c
,
a
f
wa nt
gro se me small rene onsumd to n
ney pla
e
R rg
wth asu
hy wa
p ew
e
of res dro . ble e tion a
en
dem sho
..). ner nd
gy
t
and uld
sou he
in a help
rce
sus to c
s
tain ont
abl rol
t
e m he
ann
er.
ion
pt
um
s
on
C
> Internet connection
to the Internet will enable the development of this
h
ve
d
an
ial
erctrial
mm
us
o
d
C in
en
to non-critical electrical equipment.
Switchboards and dispatch centers connected
s
icle
ic
ctr
Ele
d n
liseatio
traner
n
Cey ge
erg
and distribute energy.
These interactions enable load shedding orders
ic
ctr
Ele
n,
tio
erar
n
ge owe
ted p
buk-up
i
r
t c
Dis ba
7
Enerlin'X communication
system
By collecting circuit breakers' and actuators' status, electrical
values and countings, Enerlin’X provides a simple and reliable
link to local displays and expert web portals.
Enerlin’X
Combination of consistent gateways,
interfaces and displays, to make web
connected switchboards a reality.
It’s because Enerlin’X
collects basic
and advanced data,
that clear and relevant
dashboards can be
generated.
A clear vision of
measurements and trends
makes Savings achievable
with an efficient energy
management.
8
Numerous tests have been carried out in our
labs in order to ensure a great confidence in the
Enerlin’X communication architectures.
An illustrated technical guide describes step by
step implementation of Enerlin’X components
in a standard Prisma enclosure. Cabling
aspects are detailed, thus the effect of electrical
disturbances on the communication signals is
minimized.
Smart Panel
Communication switchboards
assembly guide.
Technical Guide
ref. DESW051EN
Enerlin’X design is largely inspired from
the professional’s strongest expectations:
> consistent functions grouped
in the smart components
(e.g. Acti 9 Smartlink),
> error free cabling, fast connectiondisconnection,
> space saving in the enclosure.
The embedded web pages of Enerlin’X
gateways make setup and configuration tests
simple and intuitive.
Precise and wellordered project
documentation is
automatically generated
for maintenance and future
evolution purpose.
Other pages are dedicated
to simple and real time
monitoring and control.
9
Lighting
10
HVAC
Exploitation,
maintenance
Application examples
11
Energy monitoring
of a group of bank branches
The banking group wants to follow and
reduce the power consumption of all its
agencies. It wants to have dashboards
for its daily tracking, available on PC from
headquarters and agencies.
All agencies do not have the same characteristics
because of their geographical location, thermal
quality of the building and their activity schedules.
Hence, 3 groups of agencies will be created for
differential monitoring.
Specifications
It requires the implementation
of three main features:
>> Daily measurement of energy
consumption of each agency
>> Breakdown by major uses (global,
HVAC, lighting and other uses)
Each agency will be involved in a challenge in its
group according to the criteria of consumption
but preserving an acceptable quality of service
(comfort maintained throughout the day).
>> Correlation depending on weather
conditions and the temperature of
the premises
Once the anomalies (if any) are identified,
recommendations will be given to the
managers concerned,to enable the reduction of
consumption.
>> Provision of responsible and agencies
customizable daily dashboards
12
>> Centralization, logging, storing data
Lighting
Inside a typical branch
Stake: economical use, preserving occupant’s comfort, in respect of regulation
Design trends
Building
design
Promote, take natural
lighting into account.
Lighting
technology
Use low-wattage lamps:
fluorescent lighting, LED.
Building
design
Provide adequate
thermal insulation.
Building
automation
Multiple lighting zones with individual automated
control, depending on the presence, brightness,
occupancy schedules, etc.
HVAC
Inside a typical branch
Building
automation
Multiple zones with individual thermal regulation.
The user’s settings are restricted to ±3°C and
ventilation stops by window switch.
Functions implemented with
a Smart Panel
+ online Energy services
1 |Measure
Metering electrical
lighting energy
The energy of
the lighting circuits
is monitored by means
of a power meter.
2 |connect
Extract, send...
the metering data
to displays, energy
specialized data
servers.
Interfaces for counters
provide access to
data via the Ethernet
network.
KWH
3 |Save
Display counting
values
Follow and analyze
the trends in order to
generate savings by
optimizing the use of
lighting.
Ethernet LCD display
shows values, browser
on a PC shows trends,
and more...
Cloud
13
Energy monitoring
of a group of bank branches
Save…
The key for savings is reliable
information on consumptions.
The data of each branch is collected on a
Schneider Electric server.
Periodic dashboards are automatically
generated and sent to the manager responsible
for the energy efficiency of the company sites.
Online services on Schneider Electric server
is a well adapted solution for multi sites energy
supervision. Distances between sites and their
number is no longer a constraint, as a single
contract can be provided for all.
The choice is made to give access to
the manager to all dashboards, including
the possibility to customize some of them.
The branch managers have access to simplified
dashboards showing their local performance
and their score on the national dashboard.
Access is provided from a common Internet
browser on a PC, protected by ID + password.
This dashboard focuses on a single branch HVAC performance.
It has been customized with 3 widgets: HVAC consumption, temperature,
performance achieved compared to target.
14
Ethernet
Modbus
Hard wired
Enerlin’X configuration in a branch
Internet
Energy server
Com’X 200
Temperature
sensors
iCT
iACT 24
et
Acti 9 Smartlink Ethern
xC60
OF+SD24
iEM2000T
Office lighting, commercial lighting:
monitoring, control, metering.
UPS main
supply
monitoring
iEM3250
iEM3250
Reflex iC60
Air conditioning /Heating:
monitoring, control, metering
Lighting: 2 zones. Relays with manual override, monitored
and controlled by iACT24 auxiliary.
One iEM2000 impulse counter per zone
Incomer metering
CLOUD
UPS: the main supply circuit breaker is monitored,
the UPS alarm output can be also wired (not represented).
An alarm is transmitted in case of tripping (or UPS fault).
Air conditioning / heating: the power is established
by means of a remote control circuit breaker during the
scheduled opening periods of the branch.
iEM3250 3 phase Modbus energy meter.
Total energy consumption of the branch:
by iEM3250 3 phase Modbus energy meter.
Smartlink Ethernet ensures:
>> monitoring the status of lighting, critical circuit breakers
>> control of lighting zones, air conditioning / heater
>> energy pulses counting
>> communication with Com’X200 energy server
and potential building controller (time scheduling)
Com’X 200 ensures:
>> temperature sensors acquisition
>> data recording, logging (sensors + Smartlink)
>> web pages generation
>> GPRS communication with the web
The locally generated web pages can be viewed through a
simple PC browser. A server collects the energy data to be
displayed in the global supervision dashboards.
The shared access to energy data
is based on 'Cloud computing'
In principle, the data of each switchboard is
transmitted on the web and stored in one or more
remote and secure servers (the 'Cloud').
They are processed by Schneider Electric
"Operation Energy Online" treatments: elaboration
of energy challenge results, costs and savings
on dashboards.
These dashboards are provided on any PC
connected to the web with an authorized
identification.
15
Energy monitoring, asset management and
maintenance of
a hotel
The hotel manager
wants to:
>> Preserve comfort by
predictive and planned
maintenance
>> Minimize the discomfort
caused by problems on
critical equipment
>> Measure electrical
consumption, the
volume of different fluids
and their evolution
>> Optimize the power
consumption by a more
appropriate use of
Specifications
The system must detect and report
problems on critical equipment
>> Fire alarm Panel
>> HVAC equipment
>> Water Heaters
>> Circuit breakers (feeders)
Alarms must be reported by audible signal
with designation on a monitor. Alarm must
be generated when periodic maintenance
of equipment is due.
equipment
The manager wants
energy dashboards on
his PC to edit reports
periodically.
16
Volumes of fluids
>> Gas
>> Hot water
>> Cold water
Dashboards must be provided
>> Energy consumption, evolution
>> Volume of fluids, evolution
>> Outside temperature, evolution
Consumption must be measured
>> Energy
>> Global
>> HVAC
>> Lighting
>> Rooms, per floor
>> Water heaters
>> Cooking and dishwashing equipment
maintenance
Inside a hotel
Stake: diagnose faults, preserve continuity of service
Design trends
Building
automation
Technology
Choice of equipment
with alarming outputs.
Monitoring of available
alarming outputs.
a Smart Panel
+ LCD display
1 |Measure
2 |connect
Operation alarms
Alarms transfer on
Ethernet network
Tripping signals from
circuit breakers, fault
signals from fire alarm,
boilers, air handling
unit and chillers.
Maintenance alarms
On air handling
operation time
(filter replacement).
Com’X 200 Energy
server sends alarm
and related information
on the hotel Ethernet
network.
3 |Save
Display of counting
values and
temperature
The web pages
are available on a
dedicated LCD touch
panel and on any PC
on the hotel network
with authorized
access.
17
Stake: check
correct operation ,
preserve the energy
efficiency of the
equipment in all
weather condition.
Stake: preserve
energy efficiency in
the rooms, measure
gains obtained with
low consumption
equipment.
Stake: avoid
waste, optimize
usage, preserving
occupant’s comfort
Building
design
Building
automation
High quality thermal
insulation and air
tightness
Fully check correct operation,
fine tune the thermal regulation
parameters during
the first season
consumption
Guestroom
energy
Technology
consumption
Low consumption
mini bars and TV sets,
LED lighting
Building
design
Optimize hot water
pipes length
Air handling
unit + Chillers
Technology
Efficient boilers and
dishwashers, water saving
shower heads, tap aerators,
dual flush toilets…
Hot water,
cold water,
gas
a Smart Panel
+ LCD display
1 |Measure
2 |connect
Metering per usage:
total room
consumption, air
handling units,
chillers consumptions
From Energy meters
Transfer of metering
data transfer on
Ethernet network
Display of counting
values and
temperature
Com’X 200 Energy
server collects and
saves the data.
Metering of volumes
of water and gas
The transfer is provided
via its Ethernet port to
the hotel network.
The web pages
are available on a
dedicated LCD touch
panel and on any PC
on the hotel network
with authorized
access.
From water, gas meter
Recording of outside
temperature
From a 0-10 V
temperature sensor
kWh
C°
m3
18
3 |Save
Hotel application:
Enerlin’X communication
diagram
LV main switchboard
Energy server
Com’X 200
Rooms
floor 3
Temp
Chiller
Air handling unit
Lighting
Rooms floor 1
Rooms floor 2
LV main switchboard,
grouping
>> Main incomer
>> Rooms circuits
feeders (grouped per
floor)
>> Protection of HVAC
circuits
>> Protection of lighting
>> Protection of and
other circuits
>> Kitchen feeder
The Com’X 200
Energy Server collects
the signals from the
outside temperature
sensor, as well as
the data from the
energy meters and the
main incomer status
and electrical values
(Compact NSX,
via its Micrologic
controller).
The Acti 9 Smartlink
Modbus collects the
signals from various
circuit breakers status
contacts.
Ethernet
Modbus
ULP
Hard wired
LV final switchboard
LV final distribution
switchboard,
grouping
>> Kitchen circuits
breakers
>> Water heaters
circuit breakers
Dishwashing
Cooking
equipment
Gas
Gas meter
Cold
water
Hot
water 1
Water meters
Hot
water 2
Technical room
The Acti 9 Smartlink
Ethernet collects
the gas and water
meter pulses, as
well as the status of
various modular circuit
breakers.
The Modbus network
is used for collecting
data from energy
meters.
19
20
Smart Panel design
21
Locate sources of useful
information in the switchboard
Masterpact 1 , Compact 2 ,
circuit breakers
Auxilliary contacts indicate breaker status.
Embedded sensors provide electrical values.
Status contacts and sensors are monitored by the embedded
Micrologic control unit.
1
Web pages generated by IFE interface + gateway
Monitoring of electrical values - Breaker status
Basic Readings: Micrologic H (Arch 1) (Micrologic H)
Load Current (A)
Power
Parameter
Voltage LL
Minimum
Breaker Status
Voltage LN
Present
Maximum
Open
Information for Maintenance
Micrologic H (Arch 1) (Micrologic H)
Breaker operation Counters
Counters
Value
Total number of indication contacts (OF) operation
54
Indication contacts (OF) operation since last reset
54
Trip indication contact (SD) operation
---
Fault trip indication contact (SDE) operation
78
Breaker operation Counters
Counters
Contact wear indicator
Value
--- %
Cradle Counters
Counters
22
Value
Cradle connected
62
Cradle disconnected
20
Cradle test
7
2
Miniature circuit breakers, remote
controlled MCB (Reflex), actuators
(relays, impulse relays) 1
Auxiliary contacts indicate open/closed status.
Specific input on actuators and Reflex ensures remote control.
Web pages (partial) generated by Acti 9 Smartlink Ethernet
Digital Channels
NAME
2
1
2
STATUS
CONTROL
PRODUCT
LABEL
Lighting 1.1
OF+SD24
L1.1
Lighting 1.2
OF+SD24
L1.2
Lighting 2.1
OF+SD24
L2.1
Lighting 2.2
OF+SD24
L2.2
Lighting 2.3
OF+SD24
L2.3
Ventilation 1
OF+SD24
V1
Energy meters 2
Contact output sends a pulse every X Wh.
2
Monitoring energy meters
Pulse Meters
NAME
PRODUCT
LABEL
Lighting 1
VALUE
1276 kWh
iEM2000T
L1
Lighting 2
5413 kWh
iEM2000T
L2
Analog sensor 3
Temperature sensor sends a 0-10 V signal.
3
Monitoring analog sensors
Analog Channels
NAME
Outside temperature
VALUE
18°C
PRODUCT
LABEL
Crouzet 89750150
Text 1
23
Masterpact , Compact NS
Measure & Connect: circuit breaker
status and electrical values
Available information and functions
Micrologic A
Micrologic E
Micrologic P
Available functions
Micrologic H*
Micrologic type
Status indications
ON/OFF (O/F)
Spring charged CH
Ready to close
Fault-trip SDE
Connected / disconnected / test position CE/CD/CT (CCM only)
Controls
A
A
A
A
A
E
E
E
E
E
P
P
P
P
P
H
H
H
H
H
MX open
XF close
Measurements
A
A
E
E
P
P
H
H
Instantaneous measurement information
Averaged measurement information
Maximeter / minimeter
Energy metering
Demand for current and power
Power quality
Operating assistance
A
E
E
E
E
E
P
P
P
P
P
H
H
H
H
H
H
P
P
P
P
H
H
H
H
Protection and alarm settings
Histories
Time stamped event tables
Maintenance indicators
A
E
A
E
* Micrologic H: for Masterpact only
Embedded trip unit and communication module
Micrologic trip unit
All Masterpact circuit breakers are equipped with
a Micrologic trip unit. This adjustable unit is mainly
designed for tripping the circuit breaker in case
necessary and monitoring the downstream circuit.
Alarms may be programmed for remote indications.
Electrical measurements and operation data for
predictive maintenance are provided for local display or
distant monitoring.
24
BCM ULP
communication module
This module provides an
ULP communication port
to a Micrologic trip unit,
giving monitoring and
control access from upper
networks, Modbus or
Ethernet.
Enerlin’X communication solutions functions
Fixed Masterpact circuit breaker
Ethernet
Drawout Masterpact circuit breaker
Modbus
Modbus
Ethernet
BCM ULP
OF, SDE…
microswitches
24VDC
24VDC
COM terminal block
(E1 to E6)
ETH2
ETH1
ETH2
ETH2
ETH1
ETH1
J
I
tory
(fac
.YY.ZZ
ETH2
ETH1
s-SL
Modbu
J
I
set)
IFE_XX
IFE
tory
CT
-100/A
LK/10
ETH1
CT
-100/A
LK/10
tus
ETH2
e Sta
Modul
tus
rk Sta
Netwo
(fac
.YY.ZZ
MX and XF
communicating voltage
releases
set)
IFE_XX
IFE
s-SL
Modbu
11
LV4340
CT
-100/A
LK/10
ETH1
CT
-100/A
LK/10
tus
ETH2
e Sta
Modul
tus
rk Sta
Netwo
CE, CD and CT contacts
11
LV4340
Breaker ULP cord
or
I/O module
or
IFE interface module
ULP system
ULP system
I2
C
I1
I4
C
I3
I5
I4
C
I3
I2
C
I1
I6
C
I5
IFM module
I6
C
+
C
24VD
A1
O1
O2
O3
I1
I2
I3
I4
I5
I6
APP
IO Mo
G
G
O3
O2
O1
13
23
33
T1
dule
A1
T2
34
24
14
H
D
C
G
MX1
XF
B
A
OF
SD
SDE
PF
CH
C
CT
CD CE
MX1 - XF
E
D
B
F
OF
SDE
PF
CH
A
F
ULP system is a fast
communication link
dedicated to circuit
breaker monitoring
and control.
Based on a RS485
physical liaison with
cable segments up
to 5 meters, it is well
adapted to severe
environment.
A choice of 6 preconnectorized cables
with different length
is provided.
IFE interface:
ULP to Ethernet
interface module.
Provides an IP address to
any circuit breaker fitted
with an ULP port.
The IFE interface makes
all available data from
the circuit breaker
accessible from an
Ethernet compatible
display (IFM128), a PC
with common browser,
or an Ethernet interface.
IFE interface + gateway
version generates
its owns web pages.
IFM: ULP to Modbus
Interface module
Makes all available data
of a circuit breaker
fitted with an ULP port
accessible via a Modbus
network. IFM acts as a
Modbus slave, accessible
from a Modbus master
(IFE interface + gateway,
Acti 9 Smartlink Ethernet
or Com’X 200).
I/O: I/O application
module
I/O is dedicated to
breakers with ULP liaison.
It ensures the monitoring
of the chassis position
by means of CE, CD, CT
contacts and control of
applications around the
circuit breaker (lighting
or load control, cooling
system, pulse metering
acquisition...).
25
Compact NSX
Measure & Connect: circuit breaker
status and electrical values
Micrologic trip units for 3 poles, 4 poles Compact circuit breakers
Available functions
Micrologic type
Status indications
ON/OFF (O/F)
A
E
Spring charged CH
A
E
Ready to close
A
E
Fault-trip SDE
A
E
Connected / disconnected / test position CE/CD/CT (CCM only)
A
E
MX
A
E
Electrical motor mechanism
A
E
A
E
Controls
Measurements
Instantaneous measurement information
Averaged measurement information
Maximeter / minimeter
E
A
E
Energy metering
E
Demand for current and power
E
Power quality
Operating assistance
Protection and alarm settings
Histories
E
Time stamped event tables
Maintenance indicators
A
E
Embedded trip unit and communication module
BSCM module
All Compact circuit breakers are equipped with a
Micrologic trip unit. This adjustable unit is mainly
designed for tripping the circuit breaker in case
necessary hence monitoring the downstream circuit
This module provides an
ULP communication port
to a Micrologic trip unit,
giving monitoring and
control access from upper
networks, Modbus or
Ethernet.
Alarms may be programmed for remote indications.
Electrical measurements, operation data for predictive
maintenance, are provided for local display or distant
monitoring.
26
Fixed Compact NSX circuit breaker
Drawout Compact NSX circuit breaker
Internal terminal block
for communication via
NSX cord
BSCM module
Breaker ULP cord
I/O module
IFE interface module
IFM module
ULP system is a
fast communication
link dedicated to circuit
breaker monitoring
and control.
Based on a RS485
physical liaison with
cable segments up to 5
meters, it is well adapted
to severe environment.
A choice of 6 preconnectorized cables
with different length
is provided.
IFE interface:
ULP to Ethernet
interface module.
Provides an IP address to
any circuit breaker fitted
with an ULP port.
The IFE interface makes
all available data from
the circuit breaker
accessible from an
Ethernet compatible
display (IFM128), a PC
with common browser,
or an Ethernet interface.
version generates its
owns web pages.
IFM: ULP to Modbus
Interface module
Makes all available data
of a circuit breaker
fitted with an ULP port
accessible via a Modbus
network. IFM acts as a
Modbus slave, accessible
from a Modbus master
(IFE interface + gateway,
or Com’X 200).
I/O: I/O application
module
I/O is dedicated to circuit
breaker with ULP liaison.
It provides the monitoring
and control of any
application around the
circuit breaker (lighting
or load control, cooling
system, pulse metering
acquisition...).
27
Acti 9
Measure & Connect: equipment status
and control, counter values
Available functions
Circuit
Breaker
Reflex
C. B.
Relay
Pulse R.
Pulse
counter
Status indications
OPEN/CLOSE
TRIPPED
Controls
Open
Close
Measurements
Counter pulses (kWh, m3, …)
Analog value
(temperature, CO2,…)
Maintenance counters
Number of trippings
Number of OPEN/CLOSE cycles
Total period of operation
of the load
Monitoring auxiliaries and counters
OF+SD24
iEM2000T
Circuit breaker auxiliaries
Energy counters
>> 24 V DC low-level contacts
- CB open/closed position
- CB tripping indication
>> DIN rail mounted
>> Designed for metering active energy consumed
by a single- or 3-phase electric circuit
Control auxiliaries and Reflex circuit breaker
iATL 24
iACT 24
ReflexTM iC60
Impulse relay
auxiliary
Contactor
auxiliary
>> 24 V:
- Command to impulse relay
- Open/close impulse relay
position
>> 24 V:
- Command to contactor
- Open/close contactor
position
Monitoring and
integrated control
circuit breaker
>> 230 V command to
impulse relay
- Various configurable
local and remote control
combinations
>> 230 V command to
contactor
-V
arious configurable
combinations
28
iEM3110
>> 24 V DC and 230 V AC
- Command
- Open/close
- Tripping indication
>> Various configurable
combinations
Analog
sensor
Ethernet
et
Modbus Master
OUT
0 -24 V DC
et
>> 7 connectors:
2 inputs / 1 output /
tor
+ 24 V DC per connec
0-10 V sensor
or 4-20 mA
OF+SD24
xC60
iATL24
iTL
Reflex iC60
IEM2000T
>> 1 connector with
0 mA inputs
2 analog 0-10 V or 4-2
DC output
>> 1 connector for 24 V
et provides a
a network
Modbus master port for
9 Smartlink
i
collecting data from Act
slaves
s
Modbus or other Modbu
.
…)
(counters, power meters
et gateway
It also provides an Ethern
facility.
ed circuit-breakers,
Acti 9 remote controll
actuators, counters
rs,
Acti 9 circuit-breake
s
ay
rel
pulse
e
rgy meters with impuls
Reflex iC60, relays, ene
nected.
output are directly con
controlled
They are monitored or
adaptors
by the I/O’s via specific
).
(OF+SD24 and iATL24
Modbus Slave
s
Acti 9 Smartlink Modbu
Smartlink Ethernet
>> 11 connectors:
2 inputs / 1 output /
tor
+ 24 V DC per connec
Smartlink cables
DC output
>> 1 connector for 24 V
es
Smartlink Modbus provid
facility
e
rfac
inte
e
slav
s
a Modbu
for Acti 9 components.
A standard connection design with
the corresponding cables has been developed
for error-free and fast cabling.
29
Enerlin’X gateways
and interfaces connectivity
IFE interface
+ gateway
Modbus Master
Com’X 200
Modbus Master
Connect
IFE
interface
Ethernet gateways
Interface to Ethernet
Switch
Smartlink
Ethernet
Modbus
Master
Interfaces to Modbus
Modbus SL networks
(one master per network, multiple slaves)
IFM
Modbus Slave
Smartlink
Modbus
Modbus Slave
Measure
Or
I/O
Energy counter, Acti 9 circuit breakers and actuators ....
Power meter
PM3200
Compact
Masterpact
Ethernet
Modbus
ULP
Hard wired
>> This diagram clearly shows the equipment involved into the "Measure"
and "Connect" functionalities defining the Smart Panel concept
>> Interface: provides a network port to one or several devices (circuit
breakers, actuators, counters,...) from their hard wired or ULP links
>> Gateway: ensures the communication between two networks with
different protocols (Ethernet and Modbus)
30
Examples of connected
switchboards architecture
Ethernet
Modbus
ULP
Hard wired
Building Ethernet network
Switch
Switch
Switch
Switch
Switch
Switch
DSL Modem
DSL Modem
Final
distribution
switchboards
Small building
Main switchboard
Medium building
Main switchboard:
Main switchboard
Unique switchboard:
Acti 9 Smartlink ensures the monitoring and control of
circuit-breakers and actuators. A power meter (PM)
shares the same Modbus network, the Compact circuit
breaker is monitored through dry contacts.
The Modbus master, an Acti 9 Smartlink Ethernet,
collects the data from the Acti 9 Smartlink Modbus
slave, and then sends all status and values to
the Com’X 200 energy server by an Ethernet liaison.
The Com’X 200 acts as a gateway, connecting the
switchboard to the Cloud via a DSL modem.
Display
The related energy dashboards generated by
the Energy Operation web services are available on
any PC connected to the web.
Acti 9 Smartlink ensures the monitoring and control of
circuit-breakers and actuators.
The main incomer is monitored and controlled directly
by the IFE interface + gateway, through an ULP link.
Other circuit breakers are connected to IFM interfaces,
through ULP links, as well.
The data from the Acti 9 Smartlink Modbus slaves are
collected by the master, an Acti 9 Smartlink Ethernet.
The IFE interface concentrates the data from:
>> the Acti 9 Smartlink’s through a Ethernet liaison
>> the IFM’s through DIN rail connectors (see page 50)
Final distribution
switchboards
An Acti 9 Smartlink
Ethernet ensures the
connection of each
switchboard to the local
Ethernet network.
The same principle as in
the main switchboards
applies for the status and
values monitoring.
>> the main incomer through its ULP link
Display
As the choice was made for a local monitoring and
control, an LCD touch panel IFM128 or PC with
standard browser is connected to the building Ethernet
network, shared by all the switchboards. The web
pages generated by the local IFE interface and Acti 9
Smartlink Ethernet are displayed on it.
31
32
Enerlin'X components
33
Enerlin’X communication system
Products overview
Ethernet has become the universal link between switchboards, computers and
communication devices inside the building. The large amount of information which
can be transferred makes the connection of Enerlin'X digital system to hosted web
services of Schneider Electric a reality. More advantages are offered to integrators
thanks to configuration web pages available remotely or on the local Ethernet network.
Enerlin'X communication system provides access
to status, electrical values and devices control using
Ethernet and Modbus SL communication protocols.
Modbus SL is the most widely used communication protocol in industrial networks.
It operates in master-slave mode. The devices (slaves) communicate one after
the other with a gateway (master).
H
G
D
G
G
G
H
C
F
B
A
E
4
E
F
Ethernet
Modbus SL
ULP
Hard wired
34
ULP is a fast communication link dedicated
to circuit breaker monitoring and control.
Enerlin'X communication devices and displays
Name
Function
Port
Com'X 200
Modbus
Energy Server
Master
with Ethernet
Gateway (1) function
Analog. Bin.
Input
Output
Cial. Ref.
Ethernet cable 6
+ WiFi
2
-
EBX200
FDM128
Ethernet LCD
colour touch screen
Ethernet
-
-
-
FLV434128
FDM121
LCD display for
circuit breaker
-
-
-
-
TRV00121
IFE
interface +
gateway
Ethernet
Ethernet interface (2) Modbus
& Gateway
Master & ULP
-
-
-
LV434011
IFE
interface
Ethernet interface
for circuit breakers
ULP
Ethernet
-
-
-
LV434010
E
Acti 9
Smartlink
Ethernet
Ethernet interface
with Input/Output
functions &
Gateway
Modbus
Master
Ethernet
14
2
7
A9XMEA08
F
Acti 9
Smartlink
Modbus
Modbus interface
with Input/Output
functions
-
Modbus Slave
22
-
11
A9XMSB11
IFM
Modbus interface
for circuit breaker
ULP
Modbus Slave
-
-
-
TRV00210
I/O
Input/Output
application module
for circuit breaker
ULP
ULP
6
-
3
LV434063
(to device)
A
B
C
D
G
H
ULP
Bin.
Input
(to server)
(1) Gateway: transfers data from a network to another (ie.: Modbus to Ethernet).
(2) Interface: transfers data from an equipment to a network.(ie.: ULP to Modbus).
Commissioning / maintenance tools
Web pages embedded into Com’X 200 and
Acti 9 Smartlink Ethernet gateways
Access with a standard PC and common browser:
bb commissioning
bb communication diagnosis
bb functional tests…
Electrical Asset Manager
Plug and play commissioning tools give a real peace of mind
to panel builders as their panels can be functionally checked
before delivery.
Loaded into a standard PC Error free commissioning. Time saving, easier
management and maintenance thanks to the advanced services:
bb project management
bb configuration of controllers, gateways, …
bb test of communication networks, diagnostic report…
35
Energy Server Com'X 200
PB112041
Functions and characteristics
Ethernet GPRS data logger function
The Energy Server Com'X 200 collects and stores wages consumptions (Water, Air,
Gas, Electricity, Steam) and environmental parameters such as temperatures,
humidity, and CO2 levels in a building. Data is periodically transmitted as a report to
an internet database server.
Data processing and display
Once received by the server, the data is ready to be processed and displayed as web
pages through web services provided by Schneider Electric, such as StruxureWare
Energy Operation and StruxureWare Energy On Line.
Energy Server Com'X 200.
bb Energy Operation.
bb Energy Online.
or by any private energy management platform.
Architecture
PB112047
PB113149
Access to the web: choice of 3 media.
Energy Server Com'X 200 - top view.
Features
bb From a simple metering installation with 1 device to large metering systems,
Com'X 200 collects data from any Modbus TCP or serial devices, from any pulse
meters, actuators and analogue sensors
bb Automatic discovery of connected Modbus devices
bb Connectivity to the cloud through Ethernet, Wi-Fi and GPRS
bb 2 Ethernet ports to separate upstream cloud connection from field
devices network
bb Protocols: HTTP, HTTPS, FTP, SMTP with Proxy management
bb Data export: Native connection to Schneider Electric Service platforms
(Energy Operation, Energy Online) - CSV file export for other database servers
bb Setup through convenient built-in web pages
bb Compliant with electrical switchboard environment
(Temperature, electro magnetic compatibility)
bb Storage of data in case of communication failure
bb Local backup of the configuration parameters
When associated with SE Services:
bb Remotely managed (firmware upgrade, configuration backup, troubleshooting,
parameters setting
bb GPRS contract management with SIM card provided
Catalogue numbers
Energy Server Com'X 200
Com'X 200 Ethernet data logger
Wi-Fi USB stick
GPRS modem with SIM card
GPRS modem without SIM card
External GPRS antenna
36
EBX 200
EBXA-USB-WiFi
EBXA-GPRS-SIM
EBXA-GPRS
EBXA-ANT-5M
PB112041
Ethernet GPRS data logger
Characteristics
Inputs
6 Digital inputs
Max impulse
frequency
Power Supply
2 Analogue inputs Sensor
compatibility
Power supply
25 Hz (min duration 20 ms) IEC 62053-31 Class A
Provided by Com'X 200: 12 V DC – 60 mA
External: from 10 to 30 V DC
PT100 – PT1000 2-wires probes (accuracy 1%)
Sensors with 4 -20 mA or 0-10 V output (accuracy 0.5%)
Provided by Com'X 200: 24 V DC - 50 mA
per input
Communication
PB112050
Energy Server Com'X 200.
Meter Network
Ethernet 1
1 RS485 Modbus serial port, RJ45 connector,
for 32 Modbus components maximum
2 Ethernet ports RJ45 10/100 Base,
DPWS ready
PoE class 3 (802.3af), DHCP client
Ethernet 2
DHCP client or server
Protocols
IPv4, IPv6 – HTTP, HTTPS, Modbus TCP/IP
2
USB port on front face
USB port 2 behind cover
11
Power/ Boot status
GPRS modem status and signal level
Modbus communication
Configuration /
Data transfer
USB Ports
For memory stick
For Wi-Fi stick
LED indicators
Ethernet communication
Wi-Fi communication mode (Access point /
Infrastructure) and status
Digital inputs status and pulse reception
Power Supply
PB112042
Energy Server Com'X 200 with the front face in Open position,
GPRS modem and Wi-Fi USB stick are connected.
AC
100-230 V (+/- 15%)(50-60Hz)
DC
Max power
24 V (+/- 10%)
26 W max
Mechanical
IP
Dimensions (HxWxD)
Weight
Environment
Operating temperature
Storage temperature
Humidity
Pollution
PB112045
GPRS modem (antenna in folded position).
Front face IP40, terminals IP20
91 x 144 x 65.8 mm
450 g
-25 to +60°C (-13 to +140°F)
-40 to +85°C (-40 to +185°F)
5 to 95% relative humidity (without condensation)
at +55ºC
Class III
Safety standards / regulation
International (CB scheme)
USA
Canada
Europe
IEC 60950
UL508
cULus 508
EN 60950
Quality Brands
CE, UL
PB112044
External GPRS antenna.
Wi-Fi USB stick
37
FDM128 Ethernet
switchboard display
For Masterpact, Compact, Powerpact*
circuit breakers and Acti 9 Smartlink
PB111801
Micrologic measurement capabilities come into full play
with the FDM128 switchboard display. It connects to
Ethernet communication via RJ45 port and displays
Micrologic information. The result is a true integrated
unit combining a circuit breaker and a Power Meter.
Additional operating assistance functions can also
be displayed.
FDM128
The FDM128 is an 'intelligent' Ethernet display. It collects the data from up to
8 devices via the Ethernet network:
bb circuit breakers, as Masterpact, Compact, or Powerpact*, individually via
their Ethernet interfaces or gateways
bb modular circuit breakers, actuators, counter and analog sensors when they
are grouped an connected to an Acti 9 Smartlink interface
FDM128 generates and displays a dedicated page for each one, with the
monitored status, values, and the potential controls.
Masterpact and Compact monitoring and control
PB111802
FDM128 display.
PB111805
Surface mount accessory.
The FDM128 is intended to display the data of a Micrologic A/E/P/H trip unit
embedded into a Masterpact or Compact. They consist of electrical measurements,
trips and operating information. Protection setting cannot be modified from the
FDM128.
Measurements may be easily accessed via a menu.
Trips are automatically displayed.
A pop-up window displays the time-stamped description of the trip.
Status indications
As long as the circuit breaker is equipped with a BCM ULP or BSCM communication
module and the appropriate status contacts (with or without Micrologic), a minimum
of information can be displayed:
bb O/F: ON/OFF
bb SDE: Fault-trip indication (overload, short-circuit, ground fault)
bb PF: ready to close
bb CH: charged (spring loaded)
bb CE, CD, CT cradle management with I/O application module
Remote control
When the circuit breaker is equipped with a BCM ULP or BSCM communication
module (including their kit for connection to XF and MX communication voltage
releases), the FDM128 display can also be used to control (open/close) the circuit
breaker. Two operating modes are available:
bb local mode: open/close commands are enabled from FDM128 while disable
from the communication network
bb remote mode: open/close commands are disabled from FDM128 while,
enabled from communication network.
Acti 9 Smartlink monitoring and control
The FDM128 can display all status, counting and analog values collected in hard
wired devices by an Acti 9 Smartlink interface. It can also provide potential controls.
Wired devices:
bb Circuit breakers
bb Energy counters
bb Analog sensors
bb Relays, impulse relays
Monitoring
O/F auxiliary contacts: ON/OFF status. SD auxiliary contacts: fault-trip indication
(overload, short-circuit, ground fault). Counters: values.Analog sensors:
(temperature value, humidity,...)
Remote control
Circuit breakers with tripping auxiliary, relays, impulse relays, Acti 9 Reflex remote
control circuit breakers.
Main characteristics
bb 115.2 x 86.4 mm with 5.7" QVGA display 320 x 240 pixels
bb Color TFT LCD, LED backlight
bb Wide viewing angle: vertical ±80°, horizontal ±70°
bb High resolution: excellent reading of graphic symbols
bb Operating temperature range -10 °C to +55 °C
bb CE / UL / CSA marking (pending)
bb 24 V DC power supply, with tolerances 24 V (limit 20.4 - 28.8 V DC)
bb Consumption y 6.8 W
*Except Powerpact M
38
Mounting
The FDM128 is easily installed in a switchboard.
bb Standard door hole Ø 22 mm
The FDM128's degree of protection is IP65 in the front and IP54 at the back.
Connection
The FDM128 is equipped with:
bb a 24 V DC terminal block: power supply range of 24 V DC (limit 20.4 - 28.8 V DC)
The FDM128 display unit has a 2-point screw connector on the rear panel of the
module for this purpose.
bb one RJ45 Ethernet jacks
The Micrologic connects to the internal communication terminal block on the
Masterpact via the breaker ULP cord and Ethernet connection through IFE interface.
Navigation
Touch screen is used for intuitive and fast navigation.
The user can select the display language (Chinese, English, French, German,
Italian, Portuguese, Spanish, etc.).
DB414405
Screens
20.12.2011
12:00:05
Main menu
S1-1 - Lighting/Level1
Quick view
Measures
Alarm history
Control
Maintenance
Product ID
Information
Reset all
Counter
Operation
xxx
Trip SDE
xxx
Close command
xxx
ESC
Quick view
DB414407
20.12.2011
12:00:05
Energy
Measures
Ep
Eq
Es
Alarm history
Control
11 318 kWh
257 kVArh
13 815 kVAh
Maintenance
ESC
6/7
Alarms
Maintenance
20.12.2011
Access to detailed information
bb "Metering" can be used to display the measurement data (I, U-V, f, P, Q, S, E,
THD, PF) with the corresponding min/max values
bb Alarms displays the trip history
bb Services provides access to the operation counters, energy and maximeter reset
function, maintenance indicators, identification of modules connected to the internal
bus and FDM128 internal settings (language, contrast, etc.)
Communication components and FDM128 connections
Metering: meter.
DB414408
Control
Fast access to essential information
bb "Quick view" provides access to five screens that display a summary of essential
operating information (I, U, f, P, E, THD, circuit breaker On / Off)
Product identification.
Quick view
Metering
When not in use, the screen is automatically shifted to low back-lighting.
3/3
12:00:05
Quick view
Measures
Alarm history
Control
Maintenance
ESC
Product ID
Information
Reset all
Load profile
0 to 49%
50 to 79%
80 to 89%
90 to 100%
2/3
Services.
39
FDM121 switchboard display
For Masterpact , Compact, Powerpact*
circuit breakers
PB103582
Micrologic measurement capabilities come into full play
with the FDM121 switchboard display. It connects to
COM option (BCM ULP) via a breaker ULP cord and
displays Micrologic information. The result is a true
integrated unit combining a circuit breaker and a Power
Meter. Additional operating assistance functions can
also be displayed.
An FDM121 switchboard display unit can be connected to a circuit breaker via an ULP
cord to display all measurements, alarms, histories and event tables, maintenance
indicators, management of installed devices on a screen. The result is a veritable 96 x 96
mm Power Meter. The FMD121 display unit requires a 24 V DC power supply. The
FDM121 is a switchboard display unit that can be integrated in the Compact NSX100 to
630 A, Compact NS or Masterpact systems. It uses the sensors and processing capacity
of the Micrologic trip unit. It is easy to use and requires no special software or settings. It is
immediately operational when connected to the Compact NSX by a simple cord. Also, it
provides monitoring and control with the use of the I/O application module, the motor
mecanism module, or the Breaker Status module. The FDM121 is a large display, but
requires very little depth. The anti-glare graphic screen is backlit for very easy reading
even under poor ambient lighting and at sharp angles.
Display of Micrologic measurements and alarms
PB103807
FDM121 display.
The FDM121 is intended to display Micrologic 5 / 6 measurements, alarms and operating
information. It cannot be used to modify the protection settings. Measurements may be
easily accessed via a menu. All user-defined alarms are automatically displayed.
The display mode depends on the priority level selected during alarm set-up:
bb high priority: a pop-up window displays the time-stamped description of the alarm and
the orange LED flashes
bb medium priority: the orange "Alarm" LED goes steady on
bb low priority: no display on the screen
All faults resulting in a trip automatically produce a high-priority alarm, without any special
settings required. In all cases, the alarm history is updated. Micrologic saves the
information in its non-volatile memory in the event of an FDM121 power failure.
Status indications and remote control
PB103581
Surface mount accessory.
When the circuit breaker is equipped with the Breaker Status Module, the FDM121 display
can also be used to view circuit breaker status conditions:
bb O/F: ON/OFF
bb SD: trip indication
bb SDE: Fault-trip indication (overload, short-circuit, ground fault)
When the circuit breaker system is equipped with the I/O application module,
the FDM121 can monitor and control:
bb craddle management
bb circuit breaker operation
bb light and load control
bb custom application
When the circuit breaker system is equipped with the motor mechanism module,
the FDM121 offers remote closing and opening control.
Main characteristics
Connection with FDM121 display unit.
bb 96 x 96 x 30 mm screen requiring 10 mm behind the door (or 20 mm when the 24 V
power supply connector is used)
bb White backlighting
bb Wide viewing angle: vertical ±60°, horizontal ±30°
bb High resolution: excellent reading of graphic symbols
bb Alarm LED: flashing orange for alarm pick-up, steady orange after operator reset if
alarm condition persists
bb Operating temperature range -10 °C to +55 °C
bb CE / UL / CSA marking (pending)
bb 24 V DC power supply, with tolerances 24 V -20 % (19.2 V) to 24 V +10 % (26.4 V)
When the FDM121 is connected to the communication network, the 24 V DC can be
supplied by the communication system wiring system.
bb Consumption 40 mA
Mounting
The FDM121 is easily installed in a switchboard.
bb Standard door cut-out 92 x 92 mm
bb Attached using clips
To avoid a cut-out in the door, an accessory is available for surface mounting by drilling
only two 22 mm diameter holes.
The FDM121 degree of protection is IP54 in front. IP54 is maintained after switchboard
mounting by using the supplied gasket during installation.
Connection
The FDM121 is equipped with:
bb a 24 V DC terminal block:
vv plug-in type with 2 wire inputs per point for easy daisy-chaining
vv power supply range of 24 V DC -20 % (19.2 V) to 24 V DC +10 % (26.4 V)
A 24 V DC type auxiliary power supply must be connected to a single point on the ULP
system. The FDM121 display unit has a 2-point screw connector on the rear panel of the
module for this purpose. The ULP module to which the auxiliary power supply is connected
distributes the supply via the ULP cable to all the ULP modules connected to the system
and therefore also to Micrologic.
40
DB112135
bb two RJ45 jacks
The Micrologic connects to the internal communication terminal block on the Masterpact
via the breaker ULP cord. Connection to one of the RJ45 connectors on the FDM121
automatically establishes communication between the Micrologic and the FDM121 and
supplies power to the Micrologic measurement functions.
When the second connector is not used, it must be fitted with a line terminator.
I1
310
A
%
I3 302
A
I
I2
315
%
IN 23
%
ESC
1 2 3 4 5 6 A
A
Navigation
Escape
Down
OK
Up
Context
Alarm LED
Five buttons are used for intuitive and fast navigation.
The "Context" button may be used to select the type of display (digital, bargraph,
analogue). The user can select the display language (Chinese, English, French,
German, Italian, Portuguese, Spanish, etc.).
Screens
%
When powered up, the FDM121 screen automatically displays the ON/OFF status
of the device.
Main menu
5 6
DB112138
DB112136
2 3 4
Produit Id
Micrologic 5.3A
Serial number:
P07451
Firmware:
PQS
E
1.02
ESC
DB125912
NonResettableEnergy
1/3
EpIN
5111947
kWh
EpOut
12345678
kWh
Load Profile
0..49%
2/3
15 H
80..89%
360 H
3H
ESC
Maintenance
Communication components and FDM121 connections
DB416695
Services.
DB416741
Metering: meter.
Alarms
Access to detailed information
bb "Metering" can be used to display the measurement data (I, U-V, f, P, Q, S, E,
THD, PF) with the corresponding min/max values
bb Alarms displays active alarms and the alarm history
bb Services provides access to the operation counters, energy and maximeter reset
bb function, maintenance indicators, identification of modules connected to the
internal bus and FDM121 internal settings (language, contrast, etc.)
610 H
50...79%
90..100%
ESC
Control
Fast access to essential information
bb "Quick view" provides access to five screens that display a summary of essential
operating information (I, U, f, P, E, THD, circuit breaker On / Off)
F - PF - cos Φ
OK
Metering: sub-menu.
Product identification.
Metering
When not in use, the screen is not backlit. Backlighting can be activated by pressing
one of the buttons. It goes off after 3 minutes.
U-V
ESC
DB112140
I
LU432091
Part number:
Quick view
Metering
Ethernet
Modbus-SL
External power supply
24 V DC
External power supply
24 V DC
A
- +
1
B
- +
D0 = A’ / Rx-, A / TxD1 = B’ / Rx+, B / Tx+
24VDC
ETH1
D
IFM
1.3 m
ETH2
D
IFE
OR
E
F
C
Red Black
LV434195
LV434196
LV434197
E1 E2 E3 E4 E5 E6
White Blue
E1 E2 E3 E4 E5 E6
B’ / Rx+ D1
A’ / Rx- D0
B / Tx+ D1
0V
A Modbus network
B Ethernet network
C Breaker ULP cord
Red Black
A / Tx- D0
Customer terminal block
F
C
24 V
B’ / Rx+ D1
A’ / Rx- D0
B / Tx+ D1
0V
A / Tx- D0
24 V
Breaker ULP cord
Connections
bb Masterpact is connected to the ULP
devices (FDM121 display, IFM, IFE
interface or I/O) unit via the breaker
ULP cord.
vv cord available in three lengths:
0.35 m, 1.3 m and 3 m
vv lengths up to 10 m possible using
extensions
White Blue
E
Customer terminal block
D FDM121 display
E ULP termination
F ULP cable
41
IFE interface,
IFE interface + gateway:
Ethernet interface, gateway
PB112059-55
IFE interface, IFE interface + gateway description
Introduction
bb The IFE interface and IFE interface + gateway enable LV circuit breakers such as
Masterpact and Compact, to be connected to an Ethernet network
IFE interface: ref. LV434010
Provides an Ethernet access to a single LV circuit breaker.
Function
Interface - one circuit breaker is connected to the IFE interface via its ULP port.
IFE interface + gateway: ref. LV434011
IFE interface, ref.: LV434010
Provides an Ethernet access to one or several LV circuit breakers.
Functions
bb Interface - one circuit breaker is connected to the IFE interface via its ULP port
bb Gateway: several circuit breakers on a Modbus network are connected via
the IFE interface + gateway master Modbus port
IFE interface, IFE interface + gateway features
DB416830
bb Dual 10/100 Mbps Ethernet port for simple daisy chain connection.
bb Device profile web service for discovery of the IFE interface, IFE interface +
gateway on the LAN
bb ULP compliant for localization of the IFE interface in the switchboard
bb Ethernet interface for Compact, Masterpact and Powerpact* circuit breakers
bb Gateway for Modbus-SL connected devices (IFE interface + gateway only)
bb Embedded set-up web pages
bb Embedded monitoring web pages
bb Embedded control web pages
bb Built-in e-mail alarm notification
Mounting
The IFE interface, IFE interface + gateway are DIN rail mounting devices. A stacking
accessory enables the user to connect several IFMs (ULP to Modbus interfaces) to
an IFE interface + gateway without additional wiring.
24 V DC power supply
IFE interface + gateway, ref.: LV434011
The IFE interface, IFE interface + gateway must always be supplied with 24 V DC.
The IFMs stacked to an IFE interface + gateway are supplied by the IFE interface +
gateway, thus it is not necessary to supply them separately. It is recommended to
use an UL listed and recognized limited voltage/limited current or a class 2 power
supply with a 24 V DC, 3 A maximum.
DB406743
IFE interface, IFE interface + gateway firmware update
The firmware can be updated using:
bb FTP
bb customer engineering tool
Required circuit breaker communication modules
The connection to IFE interface or IFE interface + gateway requires a
communication module embedded into the circuit breaker:
bb Compact NS, Powerpact P, Powerpact R: BCM ULP communication module
bb Compact NSX: NSX cord and/or BSCM module
bb Masterpact NT/NW or Compact NS, Powerpact P, Powerpact R (Fixed electrically
operated): BCM ULP communication module
bb Drawout Masterpact NT/NW or a withdrawable Compact NS, Powerpact P,
Powerpact R: BCM ULP and its respective I/O (Input/Output) application module.
All connection configurations for Masterpact NT/NW, Compact NS, Powerpact P,
Powerpact R require the breaker ULP cord. The insulated NSX cord is mandatory
for system voltages greater than 480 V AC. When the second ULP RJ45 connector
is not used, it must be closed with an ULP terminator (TRV00880).
*Except Powerpact M
42
DB416863
General characteristics
Environmental characteristics
Conforming to standards
Certification
Ambient temperature
Relative humidity
Level of pollution
Flame resistance
24VDC
ETH1
ETH2
UL 508, UL 60950, IEC 60950, 60947-6-2
cUIUs, GOST, FCC, CE
-20 to +70 °C (-4 to +158 °F)
5–85 %
Level 3
ULV0
Mechanical characteristics
Shock resistance
Resistance to sinusoidal vibrations
A
I
J
Electrical characteristics
B
Resistance to electromagnetic discharge
Immunity to radiated fields
Immunity to surges
Consumption
K
ETH1
1000 m/s2
-5 Hz < f < 8.4 Hz
ETH2
Conforming to IEC/EN 61000-4-3
10 V/m
120 mA at 24 V input
Physical characteristics
IFE
IFE-XX.YY.ZZ (factory set)
ETH1 LK/10-100/ACT
ETH2 LK/10-100/ACT
Module Status
Modbus-SL
Network Status
T
LV434011
C
D
E
F
R
H
G
Dimensions
Mounting
Weight
Degree of protection of the installed
I/O application module
Connections
72 x 105 x 71 mm (2.83 x 4.13 x 2.79 in.)
DIN rail
182.5 g (0.41 lb)
bb On the front panel (wall mounted enclosure): IP4x
bb Connectors: IP2x
bb Other parts: IP3x
Screw type terminal blocks
Technical characteristics - 24 V DC power supply
Power supply type
Rated power
Input voltage
Regulated switch type
72 W
100–120 V AC for single phase
200–500 V AC phase-to-phase
PFC filter
With IEC 61000-3-2
Output voltage
24 V DC
Power supply out current
3A
Note: it is recommended to use an UL listed/UL listed recognized limited voltage/Limited current
or a class 2 power supply with a 24 V DC, 3 A maximum.
IFE interface, IFE interface + gateway web page description
Monitoring web page
Real time data 67
Device logging
bb
bb
Control web page
Single device control
bb
Diagnostics web page
L
A Ethernet 1 and Ethernet 2 communication port.
B 24 V DC power supply terminal block
C Ethernet communication LEDs:
bb yellow: 10 Mb
bb green: 100 Mb
D Module status LED:
bb steady off: no power
bb steady green: device operational
bb steady red: major fault
bb flashing green: standby
bb flashing red: minor fault
bb flashing green/red: self-test
E Network status LED:
bb steady off: not power/no valid IP address
bb steady green: connected, valid IP address
bb steady orange: default IP address
bb steady red: duplicated IP address
bb flashing green/red: Self-test
F Sealable transparent cover
G ULP status LED
H Test button (accessible closed cover).
I Locking pad
J Modbus traffic status LED (LV434011 only)
K Device name label
L ULP ports
Statistics
Device information
IMU information
Read device registers
Communication check
bb
bb
bb
bb
bb
Maitenance web page
Maintenance log
Maintenance counters
bb
bb
Setup web page
Device localization/name
Ethernet configuration (dual port)
IP configuration
Modbus TCP/IP filtering
Serial port
Date and time
E-mail server configuration
Alarms to be e-mailed
Device list
Device logging
Device log export
SNMP parameters
Documentation links
Preferences
Advanced services control
User accounts
Web page access
bb
bb
bb
bb
bb
bb
bb
bb
bb
bb
bb
bb
bb
bb
bb
bb
bb
43
DB123430
e
Acti 9 Smartlink
IEC/EN 61131-2
Acti 9 Smartlink Modbus Slave and Acti 9 Smartlink Ethernet are used to transfer
data from Acti 9 devices to a PLC or monitoring system via the communication
system:
bb Modbus serial line for Acti 9 Smartlink Modbus Slave
bb Modbus Ethernet TCP/IP or http for Acti 9 Smartlink Ethernet
Functions
DB404502
PB107797-47
Data transmission between the network and Acti 9 devices
bb Circuit breakers, residual current circuit breakers, residual current devices:
vv open/closed state
vv tripped state
vv number of opening/closing cycles
vv number of tripping actions
bb Contactors, impulse relays:
vv opening control
vv closing control
vv total period of operation of the load (device closed).
bb Remote controlled circuit breaker/Reflex iC60:
vv opening control
vv closing control
vv tripped state
vv total period of operation of the load
bb Power meters:
vv number of pulses recorded
vv pulse value setting (e.g. kWh)
vv total consumption recorded
vv estimate of power consumption
bb Analog sensors only for Acti 9 Smartlink Ethernet:
vv temperature sensor
vv humidity sensor
vv CO2 detector
vv optical detector
Acti 9 Smart Test software
bb Electrical continuity test
bb Functional testing of the devices
bb Report printing
bb Printing of a simplified diagram
bb Project archiving
bb Compatible with Windows XP, Windows 7,
Windows 8
bb To be downloaded from Schneider Electric
websites:
vv schneider-electric.com or
vv schneider-electric country web site
DB406513
DB405140
All the data are stored in memory: number of cycles, consumption, period of
operation, even in the event of a power failure.
Acti 9 Smartlink can also exchange data with any device having 24 V DC digital
inputs/outputs.
No configuration of the connected products is required.
When Acti 9 Smartlink is switched on, communication automatically adjusts to the
Modbus Master or Ethernet (PLC, control station) communication parameters.
Installation
bb Mounting in switchboards:
vv width 24 modules per row
vv minimum spacing between rails 150 mm
bb Mounting on
vv DIN rail, with mounting kit A9XMFA04
vv Linergy FM 80 A, with locking clips supplied
vv Linergy FM 200 A, wtih mounting kit A9XM2B04
Test
bb The communication and cabling test for the connected devices can be performed
using Acti 9 Smart Test software
44
PB107753-68
Catalogue numbers
Acti 9 Smartlink
Type
Set of
1
1
1
2
A9XMSB11
1
1
1
1
2
A9XMEA08
1
A9XCATM1
6
6
6
A9XCAS06
A9XCAM06
A9XCAL06
Long: 870 mm
6
A9XCAU06
Connectors
5-pin connectors (Ti24)
12
A9XC2412
Mounting kit
DIN rail (4 feet, 4 straps, 4 adapters)
Linergy FM 200 A (4 adapters)
Lock for Linergy FM 80 A (2 clips)
1
1
1
A9XMFA04
A9XM2B04
A9XMLA02
Acti 9 Smartlink Modbus Slave
Supplied with
Modbus connector
24 V DC power supply connector
Locking clips for mounting on
Linergy FM 80
Supplied with
Connector for 4-point analog output
Modbus connector
24 V DC power supply connector
Locking clips for mounting on
Linergy FM 80
PB113286-68
24V
Q
PB107754-12
DB404941
Accessories
0V
PB107756-7
A9XCAU06
PB107755-5
I2
I1
USB cable link / Modbus for Acti 9 Smartlink test
Prefabricated cables
With 2 connectors Short: 100 mm
Medium-sized: 160 mm
Long: 870 mm
With 1 connector
Spare parts
PB110993
Connectable devices
With Ti24 interface
Reference
Description
iACT24
iATL24
OF+SD24
Type
A9C15924
A9C15424
A9N26899
Reflex iC60
See module
CA904012
Low-level control and indication auxiliary for iCT contactors
Low-level control and indication auxiliary for iTL impulse relays
Low-level indication auxiliary for C60, C120, DPN, RCCB/ID,
C60H-DC
Reflex iC60 with Ti24 interface
Without Ti24 interface
Power meters with pulse output, e.g. IEM2000T
Impulse meters complying with the IEC 62053-21 standard
24 V DC indicator lamps, Harmony XVL range
All loads not exceeding 100 mA, 24 V DC
Light sensitive switches: example IC2000
Timers, thermostats, time switches, load shedding devices
All 24 V DC auxiliary contacts, IEC 61131-2 type 1
With analog outputs
Temperature and humidity sensors, with a 0-10 V or 4-20 mA output
CO2 and optical detectors, with a 0-10 V or 4-20 mA output
45
Acti 9 Smartlink (cont.)
Common technical characteristics
Power supply
Rated
Maximum input current
Maximum inrush current
24 V DC ± 20 %
1.5 A
3A
Meter
Capacity
232 pulses per input
Input characteristics
Number of channels
Type of input
Maximum cable length
Rated voltage
Voltage limits
Rated current
Maximum current
Filtering time
In state 1
In state 0
Isolation
Negative sequence voltage protection
11 of 2-input channels
7 of 2-input channels
Current collector Type 1 IEC 61131-2
500 m
24 V DC
24 V DC ± 20 %
2.5 mA
5 mA
2 ms
2 ms
No isolation between channels
Yes
Output characteristics
Number of output channels
Type of output
Rated voltage
Filtering time
Voltage
Maximum current
In state 1
In state 0
Voltage drop (voltage in state 1)
Maximum inrush current
Leakage current
Overvoltage protection
11
7
24 V DC 0.1 A current source
500 m
24 V DC
100 mA
2 ms
2 ms
1 V max
500 mA
0.1 mA
33 V DC
Temperature
Operating
Storage
Tropicalization
Resistance to voltage dips
Degree of protection
Pollution degree
Altitude
Vibration resistance
Shock resistance
Immunity to electrostatic discharge
Operating
As per IEC 60068.2.6
As per IEC 60068.2.2 7
As per IEC 61000-4-2
Immunity to radiated magnetic fields
Immunity to fast transients
Immunity to conducted magnetic fields
Immunity to magnetic fields at mains frequency
Resistance to corrosive atmospheres
Fire resistance
For live parts
For other parts
As per IEC 60068.2.52
Salt spray test
Environment
-25°C ... +60°C (if vertical mounting, limited to 50°C)
-40°C…+80°C
Treatment 2 (relative humidity of 93% at 40°C)
10 ms, class 3 as per IEC 61000-4-29
IP20
3
0 … 2000 m
1 g / ± 3.5 mm - 5 Hz to 300 Hz - 10 cycles
15 g / 11 ms
Air: 8 kV
Contact: 4 kV
10 V/m - 80 MHz to 3 GHz
1 kV for inputs/outputs and Modbus communication.
2 kV for 24 DC power supply - 5 kHz - 100 kHz
10 V from 150 kHz to 80 MHz
30 A/m
Level 3C2 on H2S / SO2/ NO2 / Cl2
At 960°C 30 s / 30 s as per IEC 60 695-2-10 and IEC 60 695-2-11
At 650°C 30 s / 30 s as per IEC 60 695-2-10 and IEC 60 695-2-11
Severity 2
In compliance with the RoHS directive
Additional characteristics
Duration of saving memory
10 years
Prefabricated cables characteristics
Dielectric resistance
Minimum draw-out resistance
46
1 kV / 5 min
20 N
Acti 9 Smartlink Modbus Slave technical characteristics
Characteristics of the Modbus link
Link
Transmission
Transfer rate
Medium
Protocol
Type of device
Modbus addressing range
Maximum length of the bus
Type of bus connector
Modbus, RTU, RS485 serial connection
9600 baud ... 19200 baud, self-adaptable
Shielded cable, double twisted pair
Master/Slave
Slave
1 to 99
1000 m
4-pin connector
Acti 9 Smartlink Ethernet technical characteristics
Characteristics of the Ethernet link
Link
Protocol
10/100 MB Ethernet
Modbus TCP server
http (Web pages)
Static and dynamic (supplied, by default, in dynamic mode)
Address mode
Characteristics of Gateway
Protocol
Modbus slave number
Modbus addressing range
Modbus TCP/IP → Modbus SL
8
1 to 247
Characteristics of the Modbus Master link
Link
Transmission
Transfer rate
Support
Maximum length of the bus
Type of bus connector
Modbus serial connection, RTU, RS485
9600 baud ... 19200 baud, self-adaptable
1000 m
4-pin connector
Characteristics of the analog inputs
Number
Type
Measuring accuracy
Resolution
Acquisition time
Isolation
Power supply
Type of cable
Protection
2
Separate configuration for each input, either 0-10 V or 4-20 mA
1/100 full scale
12 bits
500 ms
No isolation between channels
0-24 V DC
30 m
Short-circuit protection
DB124330
Dimensions (mm)
359
42
22.5
DB406390
359
42
22.5
Weight (g)
Acti 9 Smartlink
Type
195
180
47
Acti 9 Smartlink (cont.)
PB113286-175
Ti24 connector
7 input/output channels
Protected at input against voltage
reversals
Protected at output by current limiting
bb Pin 1: 0 V
bb Pin 2: I1 Input 1
bb Pin 4: Q Output
bb Pin 5: +24 V DC
connector
Protected against voltage
reversals
bb Pin1: 0 V
bb Pin2:+24 V DC
Ethernet connector
100 base T - RJ45
Signalisation
bb Indication of operation of the
communication system and the state
of Acti 9 Smartlink Ethernet
Analog connector
2 configurable input points, either
0-10 V or 4-20 mA
bb Pin1: 0 V
bb Pin2: AI1 Input 1
bb Pin3: AI2 Input 2
bb Pin4: +24 V DC
Serial port connector
Modbus RS485 (Master)
bb Pin1: D1 Modbus
bb Pin2: D0 Modbus
bb Pin3: shielding
bb Pin4: common/0V
Serial port connector
Ti24 connector
11 input/output channels
connector
Protected against voltage
reversals
bb Pin1: 0 V
bb Pin2:+24 V DC
PB107753-175
Protected at input against voltage
reversals
Protected at output by current limiting
bb Pin 1: 0 V
bb Pin 4: Q Output
bb Pin 5: +24 V DC
RS485 Modbus (Slave)
bb Pin 1: D1 Modbus
bb Pin 2: D0 Modbus
bb Pin 3: shielding
bb Pin 4: common/0 V
Signalisation
bb Indication of operation of the
communication system and the state
of Acti 9 Smartlink Modbus Slave
Thumbwheels
bb Definition of the address
in the Modbus network
48
49
PB110993
IFM Modbus communication
interface
PB103798
Function
A IFM - Modbus communication interface - is required for connection of a Masterpact
or Compact to a Modbus network as long as this circuit breaker is provided with
a ULP (Universal Logic Plug) port. The port is available respectively on a BCM ULP
or BSCM embedded module.
The IFM is defined as an IMU (Intelligent Modular Unit) in the ULP connection System
documentation.
Once connected, the circuit breaker is considered as a slave by the Modbus master.
Its electrical values, alarm status, open/close signals can be monitored or controlled
by a Programmable Logic Controller or any other system.
Characteristics
ULP port
2 RJ45 sockets, internal parallel wiring.
bb Connection of a single circuit breaker (eventually via its I/O application module)
bb A ULP line terminator or an IFM121 display unit must be connected to the second
RJ45 ULP socket
The RJ45 sockets deliver a 24 V DC supply fed from the Modbus socket.
Built-in test function, for checking the correct connection to the circuit breaker
and IFM121 display unit.
IFM Modbus communication interface.
Ref.: TRV00210.
Modbus slave port
G-GR-0004686.2
bb Top socket for screw-clamp connector, providing terminals for:
vv 24 V DC input supply (0 V, +24 V)
vv Modbus line (D1, D2, Gnd)
bb Lateral socket, for Din-rail stackable connector
Both top and lateral sockets are internally parallel wired.
bb Multiple IFM can be stacked, thus sharing a common power supply and Modbus
line without individual wiring
bb On the front face:
vv Modbus address setting (1 to 99): 2 coded rotary switches
vv Modbus locking pad: enables or disables the circuit breaker remote control
and modification of IFM parameters
bb Self adjusting communication format (Baud rate, parity)
A
B
C
D
E
F
I
G
A Modbus screw clamp
connector
E ULP activity LED
odbus address
B M
switches
G Mechanical lock
C Modbus traffic LED
D Modbus locking pad
50
H
F Test button
H ULP RJ45 connectors
I Stacking accessory
connection
Catalogue numbers
IFM Modbus communication interface
Type
IFM -Modbus communication interface module
Stacking accessories if more than 1 IFM
ULP line terminator
2-wire RS 485 isolated repeater module
(Modbus network outside the switchboard)
Set of
Cat. no.
10
-
TRV00210
TRV00217
TRV00880
TRV00211
Technical characteristics
IFM Modbus communication interface
Dimensions
Maximum number of stacked IFM
Degree of protection Part projecting beyond
of the installed
the escutcheon
module
Other module parts
Connectors
Operating temperature
Power supply voltage
Consumption
Typical
Maximum
18 x 72 x 96 mm
12
IP4x
IP3x
IP2x
-25...+70°C
24 V DC -20 %/+10 % (19.2...26.4 V DC)
21 mA/24 V DC at 20°C
30 mA/19.2 V DC at 60°C
Certification
CE
UL
CSA
IEC/EN 60947-1
UL 508 - Industrial Control Equipment
No. 142-M1987 - Process Control
Equipment
bb CAN/CSA C22.2 No. 0-M91 General requirements - Canadian Electrical
Code Part
bb CAN/CSA C22.2 No. 14-05 Industrial Control Equipment
Simplified IFM installation
DB406745
G-GR-0004690.2
Staking IFM
Stacking accessories
Up to 12 stacked IFM
DB406744
Stacking an IFE interface + gateway with IFMs
51
DB416829
Description
The I/O (Input/Output) application module for LV breaker is part of an ULP system
with built-in functionalities and applications to enhance the application needs.
The ULP system architecture can be built without any restrictions using the wide
range of circuit breakers.
The I/O application module is compliant with the ULP system specifications.
Two I/O application module can be connected in the same ULP network.
The range of LV circuit breakers enhanced by the I/O application module are:
bb Masterpact NW
bb Masterpact NT
bb Compact NS1600b-3200
bb Compact NS630b-1600
bb Compact NSX100-630 A
I/O (Input/Output) application module for LV breaker resources
IFM Modbus communication interface.
Ref.: TRV00210.
The I/O application module resources are:
bb 6 digital inputs that are self powered for either NO and NC dry contact or pulse
counter
bb 3 digital outputs that are bistable relay (5 A maximum)
bb 1 analog input for Pt100 temperature sensor
Pre-defined applications
Pre-defined application adds new functions to the IMU in a simple way:
bb selection by the application rotary switch on the I/O application module, defining
the application with pre-defined input/output assignment and wiring diagram
bb no additional setting with the customer engineering tool required.
The resources not assigned to the pre-defined application are free for additional
user-defined applications:
bb cradle management
bb breaker operation
bb cradle management and Energy Reduction Maintenance Setting (ERMS)
bb light and load control
bb customized applications
4
1
5
User-defined applications are processed by the I/O application module in addition to
the pre-defined application selected.
The user-defined applications are available depending on:
bb the pre-defined application selected
bb the I/O application module resources (inputs and outputs) not used by the
application
The resources required by user-defined applications are assigned using the
customer engineering tool:
bb protection
bb control
bb energy management
bb monitoring
6
9
Mounting
7
8
The I/O application module is a DIN rail mounting device.
Application rotary switch
DB416828
3
2
DB416828
DB416827
User-defined applications
The application rotary switch enables the selection of the pre-defined application.
It has 9 positions and each position is assigned to a pre-defined application.
The factory set position of the switch is pre-defined application 1.
Setting locking pad
The setting locking pad on the front panel of the I/O application module enables
the setting of the I/O application module by the customer engineering tool.
52
DB416862
General characteristics
I1
C
I2
I3
C
I4
I5
C
Conforming to standards
Certification
Ambient temperature
Relative humidity
Level of pollution
Flame resistance
I6
UL 508, UL 60950, IED 60950, 60947-6-2
cUIUs, GOST, FCC, CE
-20 to +70 °C (-4 to +158 °F)
5–85 %
Level 3
ULV0
Mechanical characteristics
Shock resistance
Resistance to sinusoidal vibrations
1000 m/s2
-5 Hz < f < 8.4 Hz
Electrical characteristics
A
Resistance to electromagnetic discharge
Immunity to radiated fields
Immunity to surges
Consumption
B
10 V/m
165 mA
Physical characteristics
I1
24VDC
C
I2
I3
C
I4
I5
C
I6
C
M
5
4
3
2
1
6
APP
9
7
8
I1
AI
I2
L
I3
O1
I4
O2
I5
O3
I6
K
T
J
IO
E
F
G
LV434063
O1
13
D
O2
14
23
O3
24
33
34
T1
A1
T2
Dimensions
Mounting
Weight
Degree of protection of the installed
Connections
71.7 x 116 x 70.6 mm (2.83 x 4.56 x 2.78 in.)
DIN rail
229.5 g (0.51 lb)
bb On the front panel (wall mounted enclosure): IP4x
bb I/O parts: IP3x
bb Connectors: IP2x
Screw type terminal blocks
Technical characteristics - 24 V DC power supply
Power supply type
Rated power
Input voltage
Regulated switch type
72 W
100–120 V AC for single phase
200–500 V AC phase-to-phase
PFC filter
With IEC 61000-3-2
Output voltage
24 V DC
Power supply out current
3A
Note: it is recommended to use an UL listed/UL listed recognized limited voltage/Limited current
or a class 2 power supply with a 24 V DC, 3 A maximum.
Digital inputs
Digital input type
I
13
14
23
H
24
33
34
T1
T2
Self powered digital input with current limitations as
per IEC 61131-2 type 2 standards (7 mA)
Input limit values at state 1 (close)
19.8–25.2 V DC, 6.1–8.8 mA
Input limit values at state 0 (open)
0–19.8 V DC, 0 mA
10 m (33 ft)
Note: for a length greater than 10 m (33 ft) and up to 300 m (1,000 ft), it is mandatory to use a
shielded twisted cable. The shield cable is connected to the I/O functional ground of the I/O
application module.
Digital outputs
1
2
O
N
A 24 V DC power supply terminal block.
B Digital input terminal block:
6 inputs, 3 commons and 1 shield
C 6 input status LEDs
D Analog input status LED
E 3 output status LEDs
F I/O application module identification labels
G Sealable transparent cover
H Analog input terminal block
I Digital output terminal blocks
J ULP status LED
K Test/reset button (accessible with cover closed)
L Setting locking pad
M Application rotary switch: 1 to 9
N Switch for I/O addressing (I/O 1 or I/O 2)
O ULP connectors
Digital output type
Rated load
Rated carry current
Maximum switching voltage
Maximum switch current
Maximum switching power
Minimum permissible load
Contact resistance
Maximum operating frequency
Digital output relay protection
by an external fuse
Bistable relay
5 A at 250 V AC
5A
380 V AC, 125 V DC
5A
1250 VA, 150 W
10 mA at 5 V DC
30 mΩ
bb 18000 operations/hr (Mechanical)
bb 1800 operations/hr (Electrical)
External fuse of 5 A or less
10 m (33 ft)
Analog inputs
The I/O application module analog input can be connected to a Pt100 temperature sensor
Range
-30 to 200 °C
-22 to 392 °F
Accuracy
±2 °C from -30 to 20 °C
±3.6 °F from -22 to 68 °F
±1 °C from 20 to 140 °C
±1.8 °F from 68 to 284 °F
±2 °C from 140 to 200 °C ±3.6 °F from 284 to 392 °F
Refresh interval
5s
5s
53
54
Design and monitoring tools
55
Electrical Asset Manager
Software
DB406746.eps
Introduction
Electrical Asset Manager is a software application that helps the user to manage a
project as part of designing, testing, site commissioning, and maintenance of the
project life cycle.
It enables the user to prepare the settings of the devices offline (without connecting
to the device) and configure them when connected with the devices.
Also, it provides a lot of othervalue added features for the user to manage the project
such as, safe repository in cloud, attach artifacts to each device or at the project
level, organize devices in switchboard wise, manage a hierarchical structure of the
installation etc.
Compatible devices (configuration and device management)
DB406747.eps
Electrical Asset Manager is compatible with the following devices:
bb Compact NSX100-630 (IEC)
bb Compact NS630b-3200 (IEC)
bb Masterpact NT/NW (IEC and UL) circuit breaker
bb Acti 9 Smartlink.
bb Compatible devices (Device Management in the project)
bb Switch disconnectors (Compact NSX, Masterpact & PowerPact Family)
bb Third party devices
DB406748.eps
References:
Electrical Asset Manager software package can be downloaded from our website
www.schneider-electric.com.
Features
Electrical Asset Manager supersedes the Schneider Electric customer engineering
tools such as Remote setting Utility (RSU) and Remote Control Utility (RCU) with
additional features.
DB406749.eps
Electrical Asset Manager supports the connection of Schneider Electric
communicable devices to:
bb create projects by device discovery, selection of devices, and import Bill of
Material (BOM)
bb monitor the status of protection and I/O status
bb read information (alarms, measurements, parameters)
bb check protection discrimination between two devices
bb upload and download of configuration or settings in batch mode
to multiple devices
bb carry out commands and tests
bb generate and print device settings report and communication test report
bb manage multiple devices with electrical and communication hierarchy model
bb manage artifacts (project documents)
bb check consistency in settings between devices on a communication network
bb compare configuration settings between PC and device (online)
bb download latest firmware
Electrical Asset Manager enables the user to avail the advanced features of the
software once the project is saved in Schneider Electric cloud.
56
DB406750.eps
Functions
Offline Mode
A project can be built in offline mode through 2 different ways:
bb through BOM file import
bb through Device Selection
Online Mode
A project can be built in online mode through device discovery apart from
the methods possible through offline method.
Once the project is built, the following functions can be performed in addition to
the functions available in offline mode:
bb compare the device parameters with project parameters
bb load parameters from project to the device and vice versa
bb firmware downloads to the device
bb monitor the measurement, maintenance, device status and I/O status
bb control functions
User Interface
Electrical Asset Manager software provides fast direct access to the project and
the devices in the project through different tabs.
bb Project: to provide the project information including customer details, project
references and to add project artifacts (documents related to the project)
bb Configuration: to build up the tree structure of the project architecture ; to have a
table view of the devices added in the project ; to set the parameters of the devices ;
to transfer the device settings ; to view the tripping curves; to attach device artifacts
and to download the latest firmware, to do the communication test for all the devices
and generate the test report
bb Monitoring: this allows the user to monitor the real time values of different devices
through different sub tabs namely Monitoring, Logs and Control
bb Reports: report tab allows you to generate and print a report of the project settings
from the report tab. The user details and project characteristics are automatically
filled with the details entered in the Project page
DB406753.eps
DB406752.eps
DB406751.eps
Additionally, the user can open an existing project and modify the settings offline.
The user can do the discrimination curve check and firmware compatibility check
for devices in the project.
57
Acti 9 Smart Test software
for PC
Introduction
The Acti 9 Smart Test software for PC is used for testing Acti 9 Smartlink devices
after commissionning.
It allows a full test of Acti 9 Smartlink assemblies before use.
Compatible devices
bb Acti 9 Smartlink Ethernet
bb Acti 9 Smartlink Modbus
bb PC with either Windows XP SP3, Windows Vista (32 bits and 64 bits),
Windows 7 (32 bits and 64 bits) or Windows 8 (32 bits and 64 bits)
Purpose
bb Test of the Ethernet and/or Modbus networks
bb Test of the wiring of components connected to Acti 9 Smartlink
(circuit breakers, relays…)
bb Function test of components
bb Generation of test reports
bb Create, save, restore Acti 9 Smartlink configuration
bb Firmware update
Test of communication
Test of wiring
OF+
SD24
xC60
iATL24
IEM2000T
Reflex iC60
iTL
0-10 V sensor
or 4-20 mA
Function test
Characteristics
Capacity
Number of simultaneously tested Acti 9 Smartlink on the same Modbus network:
bb 1 Acti 9 Smartlink Ethernet (Modbus master) + 0 to 8 Acti 9 Smartlink Modbus
(slaves)
bb 1 to 10 Acti 9 Smartlink Modbus (slaves)
Human interface
Choice of 9 languages (Chinese, Dutch, English, French, German, Italian,
Portuguese, Russian, Spanish).
Download
Free with the and user manual on www.schneider-electric.com.
Required test environments
B
A
A
A Acti 9 Smartlink Ethernet
(Modbus Master)
B Ethernet cable with dual
RJ45 plugs 1
58
B
A Acti 9 Smartlink Modbus (slave)
B USB-RS 485 converter cable for
Modbus SL
(ref. A9XCATM1)
Main screenshots
Create, save, restore projects
Starting from the main dashboard, choice of function tabs, latest news.
Network configuration
The identity of the master and of each slave must be declared.
Acti 9 Smartlink Ethernet (Modbus master): IP address, label, number of slaves,
port, etc.
Acti 9 Smartlink Modbus (Slave): Modbus address, label.
Acti 9 Smartlink configuration and test, at a glance
Each Acti 9 Smartlink channel is described in a specific tab identified
by the channel number.
A
A
B
B
C
D
C
E
D
F
G
A
B
B
H
E
C
D
E
I
J
F
K
F
G
H
A Communication status icon
B Acti 9 Smartlink tabs
C Firmware version and serial number
D Acti 9 Smartlink Modbus address
E Device toolbox
L
G
A Device function label
B Remove the device
C Connected device type
D Input 1 register value (read value)
E Input 2 register value (read value)
F Ouput register value (written value)
G Enables behavior check of each
device
F Representation of devices connected to channels
A Device function label on input 1
B Remove the device
C Input 1 delta pulse calculator
D Connected counter on input 1
E Input 1 meter value
F Input 1 pulse weight
G Device function label on input 2
H Input 2 delta pulse calculator
I Connected counter on input 2
J Input 2 meter value
of Acti 9 Smartlink devices
K Input 2 pulse weight
L Enables behavior check of each device
G Reset configuration button
H Channel status and values
Test report
Both communication and functional aspects of each Acti 9 Smartlink can be tested
with the software.
A report is automatically generated which could be used as a contractual document
in a project.
Control test
For each channel which can be controlled (i.e. connected to a relay), the user makes
the software generate an ON – OFF signal to the output. The result can be physically
observed, and recorded in the Test report.
Monitoring test
For each channel which can be monitored (i.e. connected to a circuit breaker), the
user activates open/close/trip on the C.B. The result is displayed on the Test page
and recorded in the Test report.
59
60
Index of commercial references
61
Meters and auxiliaries overview
for 'Measure' functions
Index of
commercial references
Energy meters
Type
Pulse output
Modbus
Series
iEM2000T, iEM2010
iME1zr
iEM3110, iEM3210
iEM315x, iEM325x, iEM335x
Multifunction meters
Type
Pulse output
Multichannel counting
Ethernet
Modbus
Series
PM200P
EM4800
ION6200
Alarm Ethernet
PM3000
PM5350
PM800
Circuit breakers with built-in power meter
Acti 9 auxiliaries for connection to Smartlink
Series
Type
Circuit breaker
monitoring
Actuator monitoring
and remote control
Series
OF+SD24
iATL 24
Compact NSX +
Micrologic E
Masterpact +
Micrologic E, H, P
ION7300
iACT 24
Compatible counters, power meters (old ranges)
Pulse counters
ME1Zr, ME3zr, ME4zr, PM9p, PM200p, EN40 P
Power meters – Modbus exchange protocol
PM9c, PM500 series, PM700 series, PM1200, EM6400 series
Other devices
Analog sensors
RTD (Pt100, Pt1000)
4...20 mA sensor
0...10 V sensor
62
Series Modbus / TCP/IP Modbus gateways
EGX100 - EGX300
Index of commercial references
Product
Description
Lot of ta Commercial ref.
Interfaces + gateways
Com'X 200 Ethernet data logger
EBX200
LV434011
A9XMEA08
Interfaces
Acti 9 Smartlink Modbus
A9XMSB11
IFM
TRV00210
IFE interface
LV434010
I/O module
LV434063
I/O
Displays
FDM128 Ethernet switchboard display
FLV434128
TRV00121
Accessories for Com'X200
GPRS Modem
EBXA-GPRS
Aerial for GPRS modem
EBXA-ANT-5M
Wi-Fi USB modem
EBXA-USB-WIFI
Accessories for Acti 9 Smartlink
USB cable link / Modbus
Prefabricated cables 2 connectors
for Acti 9 Smartlink test
1
A9XCATM1
Short: 100 mm
6
A9XCAS06
Medium-sized: 160 mm
6
A9XCAM06
Long: 870 mm
6
A9XCAL06
Prefabricated cables 1 connector
Long: 870 mm
6
A9XCAU06
Connectors
5-pin connectors (Ti24)
12
A9XC2412
Mounting kit
DIN rail (4 feet, 4 straps, 4 adapters)
1
A9XMFA04
Linergy FM 200 A (4 adapters)
1
A9XM2B04
Lock for Linergy FM 80 A (2 clips)
1
A9XMLA02
Spare parts
Connection adapters for Acti 9 components
iACT24
iATL24
OF+SD24
Low-level control and indication auxiliary
for iCT contactors
Low-level control and indication auxiliary
for iTL impulse relays
Low-level indication auxiliary for C60,
C120, DPN, RCCB/ ID, C60H-DC
A9C15924
A9C15424
A9N26899
63
Tested, Validated, Documented Smart
panel architectures (TVD)
Tested in performance labs by experts, in all possible configurations
Validated full functional compatibility of devices
Documented, with user guide, predefined CAD panel designs & wiring diagrams
Make the most of your energySM
Schneider Electric India Pvt. Ltd.
Corporate Office
9th Floor, DLF Building No. 10, Tower C, DLF Cyber City,
Phase II, Gurgaon - 122002, Haryana
Tel: 0124 3940400, Fax: 0124 4222036
www.schneider-electric.com
Customer Care Centre :
Toll-free numbers: 1800 425 4272, 1800 103 0011
General number: 0124 4222040
Email: [email protected]

Enerlin`x - Schneider Electric

Transcription

Similar documents

Path Breaker Award 2014

- Netico GmbH

RoomWizard® II Scheduling System Technical Specifications

SADEC – Data Acquisition System for Continuous Emissions

FDM128 - Display for 8 LV Devices - User Guide

Manual MODbus - Turbovex A/S

Sensaphone Sentinel Pro Cloud-Based Monitoring Sales Brochure

csi global connect-internet remote access

the FlightLite 100 data sheet

LumiGrow® SmartPAR™ Light Management Service