Nautilus - Sport

Art. 200 3216
'Nautilus
Assembly Manual
TOOLS AND HARDWARE
12
13
FASTENERS AND ASSEMBLY TOOLS
2
3
28
4
29
14
15
16
17
1
18
19
33
20
21
31
28
16
34
25
9
8
22
5
10
6
11
28
29
31
26
27
23
24
REFERENCE
3
SKETCH
DESCRIPTION
QUANTITY
2
PAN HEAD SCREW(M4x15L)
5
NYLON NUT(M10x1.5P)
2
6
FLAT WASHER
4
11
SOCKET HEAD CAP SCREW(M10x85L) 2
15
CURVE WASHER
4
16
SPRING WASHER
10
17
SOCKET HEAD CAP SCREW(M8x50L)
4
19
PAN HEAD SCREW(M5x15L)
4
21
PAN HEAD SCREW (M10x25L)
2
22
PAN HEAD SCREW (M5x10L)
4
24
PAN HEAD SCREW (M5x25L)
4
33
CARRIAGE BOLT(M8x100L)
6
34
NYLON NUT
6
PHILLIPS DRIVER
1
M5 ALLEN WRENCH
1
M6 ALLEN WRENCH
1
M8 ALLEN WRENCH
1
OPEN WRENCH(#17;#13)
1
1
ASSEMBLY INSTRUCTIONS
STEP 1: Attaching the Front/ Rear Stabilizer
End Caps
NE 2000 ELLIPTICAL TRAINER
STEP 2: Attaching Console Mast
12
33
13
F
2
3
28
4
29
28
17
1
16
Attach the end caps (#1) to the rear stabilizer.
33
REFERENCE
14
15
16
18
6
34
11
15
20
31
5
19
Connect the two ends9of the console cable (#28).
Attach the left end cap (#2) & right end cap (#4) to the front stabilizer and fasten
them with two 15mm pan head screws (#3).
3
16
Attach the console mast to the base unit and fasten with six M8 nylon nuts (#34), six
5
21bolts (#33). Be careful
spring washers (#16), and six carriage
10not to damage or discon8
nect wire during this step.
6
28
17
11
19
21
16
22
24
34
33
25
9
5
22
23
24
34
25
16
ASSEMBLY INSTRUCTIONS
STEP 3: Attaching Pedal Arms
NE 2000 ELLIPTICAL TRAINER
STEP 4: Attaching Upper Body Arms
34
22
25
9
5
8
10
12
23
24
13
2
6
3
28
4
29
11
14
15
16
28
17
1
29
18
31
19
26
27
33
Attach the left pedal arm (#8) and right pedal arm (#10) to the sub pedal arms (#9)
and fasten them with two M10 nylon nuts (#5), four flat washer (#6) and two 85mm
socket head cap screws (#11).
Attach the
31left upper body arm (#13) and right upper body arm (#14) to the left pedal
arm (#8) and right pedal arm (#10) and fasten them with four curve washers (#15),
four spring washers (#16) and four 50mm socket head cap screws (#17).
8
10
6
1
1
1
2
Attach the side covers (#18) to the left (#8) and right (#10) pedal arms and fasten
them with four 15mm pan head screws (#19).
2
2
3
25
5
6
Insert the top covers (#12) in the left (#8) and right (#10) pedal arms.
34
9
5
1
20
21
16
3
1
Connect the left and right touch heart rate wires (#29,#31). Do not allow the upper
body arms (#13, 14) to hang freely from wires.
28
REFE
22
23
24
3
17
18
28
ASSEMBLY INSTRUCTIONS
19
16
STEP 5: Attaching Handlebar
NE 2000
ELLIPTICAL TRAINER
6
FLAT W
5
10
6
17
11
19
21
22
24
Attach the handlebar (#20) to the console mast bracket and fasten with two 25mm
pan head screws (#21).
22
23
22
16
9
25
CURVE
25
21
24
SOCKE
15
20
31
NYLON
STEP11
6: Installing Computer Console
34
8
5
31
23
24
SPRING
SOCKE
PAN HE
28
29
PAN HE
31
26
27
PAN HE
PAN HE
33
CARRIA
34
NYLON
Connect the console cable (#28) and touch heart rate wire (#29) into back of computer
console (#25).
Attach the computer console (#25) to the console mast bracket and fasten with four
10mm pan head screws (#22).
PHILLIPS
Attach the console bottom cover (#23) to the computer console (#25) and fasten with
four 25mm pan head screws (#24).
Plug in the A/C adapter (#27) into the Jack Plug (#26) and into 110v wall outlet. To
turn computer on simply start exercising. After 5 minutes of non-use, computer will go
into sleep mode and does not need to be unplugged.
M5 ALLE
28
29
M6 ALLE
31
26
M8 ALLE
NE 2000 ELLIPTICAL TRAINER
Final Check
Assembly of your Nautilus elliptical is now complete. Check again to insure that all parts
are properly installed and that all nuts and bolts are completely secured. Get on the unit
and check to see that the computer console and resistance system are working properly.
Please be sure to read through your Nautilus owner’s manual completely before using
your elliptical. It will describe in detail how to operate the product safely and correctly.
Should you experience any problems or have any additional questions about your
Nautilus elliptical, please contact your Authorized Nautilus Fitness Retailer from where
your equipment was purchased.
We hope you enjoy your new Nautilus equipment for many years to come!