Ball V alves

PL_Kugelhähne_Xomox_engl
28.08.2003
7:01 Uhr
Seite 1
Process Valves & Actuators
CRANE
Process Valves & Actuators
S2 Stem Double-Sealing System
Efficient primary stem
sealing by spherical segment ring (TA-Luft approved).
Design Benefits:
• No external leakage
• Significantly reduced
operation and maintenance costs
• No media trapped between primary and secondary seal
• Low torque
XOMOX
Products Profile
XOMOX
Worldwide Manufacturing,
Sales and Service
Sleeved Plug Valves
Europe / Middle East / Africa / America
DIN and ANSI versions.
On-Off-valves, Multiport valves (3 to 5-way valves).
Jacketed valves.
Metallic Ball Valves
DIN and ANSI versions.
On-Off-valves, multiport valves (3 to 5-way valves).
Special valves.
High Performance Butterfly Valves
DIN and ANSI versions.
PTFE, FIRESAFE and metal seat DN 50 to DN 2550,
NPS 2 to 102, WAFER- and LUG-design.
Fully Lined Plug Valves
DIN and ANSI versions.
On-Off-valves, FEP and PFA lining.
Multiport valves (3 to 5-way valves).
Jacketed valves.
Fully Lined Ball Valves
FIRE SAFE X-Seal
Option
Body gasket
DIN and ANSI versions.
PFA- and FEP-lining.
Fully Lined Butterfly Valves
DIN and ANSI versions.
WAFER- and LUG design, PFA-, FEP- and PTFE-lining.
Other Fully Lined Valves
Check valves, sight glasses, filters and strainers,
dip pipes and PTFE gaskets.
Control Valves
Control valves for precise throttling service.
Actuators and Accessory
XOMOX XRP-actuators for plug-, ball- and butterfly valves.
Complete actuation accessory packages.
Roughly compressed
XOMOX Burgkirchen
Tel.: (49) 8679-6092/93
Fax: (49) 8679-4944
[email protected]
XOMOX Göhren
Tel.: (49) 34638-6080
Fax: (49) 34638-60899
[email protected]
XOMOX Grevenbroich
Tel.: (49) 02181-4944-0
Fax: (49) 02181-4944-44
[email protected]
XOMOX Norderstedt
TEL.: (49) 40-526860-0
FAX: (49) 40 526860-33
[email protected]
XOMOX Wachenheim
Tel.: (49) 06322-9465-0
Fax: (49) 06322-9465-20
[email protected]
BELGIE/BELGIQUE
XOMOX Belgium
Tel.: (32) 3-6468675/
3-6451796
Fax: (32) 3-6441975
[email protected]
PROMETAL N.V.
Tel.: (32) 3-2051320
Fax: (32) 3-2328434
Fully compressed
Graphite outside ring + Metal ring + TFM-inside ring
Stem seal (spherical seal)
BUNDESREPUBLIK
DEUTSCHLAND
XOMOX International
GmbH & Co
Tel.: (49) 8382-702-0
Fax: (49) 8382-702-144
[email protected]
Option
Design Benefits
• Fire-tested and chemical resistant sealing
No contact of graphite parts with flow media
• Maximum tightness to the atmosphere in
operating condition and fail case (fire, etc.)
• Low space requirements
• Cost-efficient solution
Metallic Delta ring + PTFE
Detailed technical information providing comprehensive data is available
on request.
XOMOX Your Partner in Valves
Continuous improvement is the foundation of our
EN ISO 9001 certified Quality Process. We believe that
continuous improvement is necessary at all levels and
in all functions across the organization.
Our Quality Process relies on effective teamwork
between our customers, employees, suppliers,
representatives and communities.
www.xomox.de
Process Valves & Actuators
XOMOX International GmbH & Co.
XOMOX - ball valves
CESKA REPUBLIKA
XOMOX
Tel.: (420) 558 877 146
Fax: (420) 558 877 146
ESPANA
XOMOX International
GmbH & Co. OHG
Sucursal en España
Tel.: (34) 93 786 92 50
Fax: (34) 93 785 98 51
[email protected]
ÖSTERREICH
XOMOX International
Ges.mbH
Tel.: (43) 732-652400/
732-661086
Fax: (43) 732-665541
[email protected]
FRANCE
XOMOX France S.A.
Tel.: (33) 389-611361
Fax: (33) 389-064011
[email protected]
POLSKA
XOMOX
Tel.: (48) 32-2873428
Fax: (48) 32-2873428
XOMOX Agence Paris
Tel.: (33) 164920113
Fax: (33) 169920118
[email protected]
HUNGARIA
XOMOX
MAGYARORSZAG KFT
Ceh u. 1.
8000 Székesverhérvár
Tel.: (36) 06-22-513-100
Fax: (36) 06-22-513-131
[email protected]
ITALIA
CRANE PROCESS FLOW
TECHNOLOGIES S.r.l.
Division XOMOX Italia
Tel.: (39) 039 2704373
Fax: (39) 039 2704450
lorenzo_bisogno_xomox@
craneflow.com
MIDDLE EAST
XOMOX Germany
Tel.: (49) 8382-702-0
Fax: (49) 8382-702-216
[email protected]
NEDERLAND
XOMOX Nederland
Tel.: (31) 181-618100
Fax: (31) 181-614100
[email protected]
NORGE
XOMOX Norge
Tel.: (47)231-73500
Fax: (47)231-73501
[email protected]
RUSSIA
XOMOX
Tel.: (7) 095-9265406
(7) 095-202 6919
Fax: (7) 095-202 6919
[email protected]
SCHWEIZ
XOMOX AG
Tel.: (41) 61-4859550
Fax: (41) 61-4859555
[email protected]
SUOMI/FINLAND
XOMOX Finland GmbH & Co.
Sivuliike Suomessa
Tel.: (358)14-3385000
Fax: (358)14-3385050
[email protected]
SVERIGE
XOMOX Sverige
Tel.: (46) 303-88980
Fax: (46) 303-88982
[email protected]
UNITED KINGDOM
XOMOX Ltd.
Tel.: (44) 1271-311111
Fax: (44) 1271-322022
[email protected]
USA
XOMOX Cincinnati
Te.l: (1) 513 745-6000
Fax: (1) 513-745-6972
www.xomox.com
Further manufacturing, sales and service in:
USA, Brasil, Canada, China, India, Japan, Korea, Mexico and Singapore
XOMOX
Service and Automation Center
Our EN ISO 9001 certified Service and Automation Centers
offer comprehensive service, including valve automation, repair,
modification, accessory packaging and other services. We also have
standard valves, spare and accessory parts in stock.
Our Service and Automation Centers offer our customers
complete service and quick turnaround for the most urgent
requirements.
Von-Behring-Straße 15
D-88131 Lindau/Bodensee
Telefon: (49) 8382-702-0
Fax: (49) 8382-702-144
[email protected]
Subject to technical modifications.
Ball Valves
A Crane Co. Company
© XOMOX-XP-MBV-GB-09/03
Printed in Austria
Process Valves & Actuators
PL_Kugelhähne_Xomox_engl
28.08.2003
7:02 Uhr
Seite 2
Process Valves & Actuators
Technical Data
Process Valves & Actuators
Process Valves & Actuators
Compact Ball Valve Type KK 1
Flange Ball Valve Type KVA, KVL, KVK
3 pcs Body Ball Valve Type 240-70
Design Features & Benefits
• Space saving and light design
• Economic
• Ideal for use in compact piping systems
• Maintenance-free design
• Low torque
• Minimized body cavity
• Investment cast body
• Full bore
• TA-Luft approved, anti-blow out S2 stem design
• Compact body design
• ISO 5211 actuator assembly flange
• Antistatic device
• Stainless steel lever
Design Features & Benefits
• Modular construction DIN, ANSI
• Maintenance - free
• Low torques
• Minimized body cavity
• Split body design
• Investment cast body
• Face to face acc. DIN EN558-1 (F4 & F1)
and ANSI B16.10
• Full bore
• TA-Luft approved, anti-blow out S2 stem design
• ISO 5211 actuator assembly flange
• Antistatic device
• Stainless steel lever
• Lever locking device
Design Features & Benefits
• Modular construction
• Light and economic design
• Ideal for use in compact piping systems
• Maintenance - free
• Low torques
• Swing out body design for easy and servicefriendly maintenance and repair works
• 3 pcs body design, investment cast
• Full bore
• TA-Luft approved, anti-blow out S2 stem design
• ISO 5211 actuator assembly flange
• Antistatic device
• Stainless steel lever
• Lever locking device
Available connections:
- GAS or NPT Female threads
- Butt weld or socket weld ends
- Extended butt welded ends
- Flanged ends
Sizes:
DN 15-100 (1/2“-4“)
Pressure range:
PN 16-40
Technical Data
Sizes:
DN 15-100 (1/2“-4“)
Pressure range:
PN 16-40
ANSI Cl. 150-300
Technical Data
Temperature range: -40°C bis 200°C
Temperature range: -40°C bis 200°C
(400°C with metal seats)
Materials
Stainless steel 1.4408 n. EN10213-4
Materials
Options
Approvals/Certificates
• Body and ball made out from bar stock
(special material)
• PTFE Reinforced or metal seats
• Stem extention with T-Lever
• Cavity filler
Options
CE - marking
TA-Luft approval acc. VDI 2440
Approvals/Certificates
XOMOX - ball valves
CE - marking
TA-Luft approval acc. VDI 2440
Type test approval
Fire safe acc. API607 4th ed.
XOMOX - ball valves
DN 15-100 (1/2“-4“)
Pressure range:
PN 16-63 up to 2“
PN 16-40 2”-4”
Temperature range: -40°C up to 200°C
Carbon steel 1.0619 and Stainless steel 1.4408 acc. EN 10213-4
Carbon steel A216-WCB and Stainless steel A351-CF8M
• Body and ball made out from bar stock
(special material)
• PTFE Reinforced seats or metal seats
• Stem extention with T-Lever
• Steam jacket (KVL only)
Sizes:
Materials
Carbon steel 1.0619 and
Stainless steel 1.4408 n. EN10213-4
Options
• PTFE reinforced seats
• Stem extention with T-Lever
Approvals/Certificates
CE - marking
TA-Luft approval acc. VDI 2440
XOMOX - ball valves
PL_Kugelhähne_Xomox_engl
28.08.2003
7:02 Uhr
Seite 2
Process Valves & Actuators
Technical Data
Process Valves & Actuators
Process Valves & Actuators
Compact Ball Valve Type KK 1
Flange Ball Valve Type KVA, KVL, KVK
3 pcs Body Ball Valve Type 240-70
Design Features & Benefits
• Space saving and light design
• Economic
• Ideal for use in compact piping systems
• Maintenance-free design
• Low torque
• Minimized body cavity
• Investment cast body
• Full bore
• TA-Luft approved, anti-blow out S2 stem design
• Compact body design
• ISO 5211 actuator assembly flange
• Antistatic device
• Stainless steel lever
Design Features & Benefits
• Modular construction DIN, ANSI
• Maintenance - free
• Low torques
• Minimized body cavity
• Split body design
• Investment cast body
• Face to face acc. DIN EN558-1 (F4 & F1)
and ANSI B16.10
• Full bore
• TA-Luft approved, anti-blow out S2 stem design
• ISO 5211 actuator assembly flange
• Antistatic device
• Stainless steel lever
• Lever locking device
Design Features & Benefits
• Modular construction
• Light and economic design
• Ideal for use in compact piping systems
• Maintenance - free
• Low torques
• Swing out body design for easy and servicefriendly maintenance and repair works
• 3 pcs body design, investment cast
• Full bore
• TA-Luft approved, anti-blow out S2 stem design
• ISO 5211 actuator assembly flange
• Antistatic device
• Stainless steel lever
• Lever locking device
Available connections:
- GAS or NPT Female threads
- Butt weld or socket weld ends
- Extended butt welded ends
- Flanged ends
Sizes:
DN 15-100 (1/2“-4“)
Pressure range:
PN 16-40
Technical Data
Sizes:
DN 15-100 (1/2“-4“)
Pressure range:
PN 16-40
ANSI Cl. 150-300
Technical Data
Temperature range: -40°C bis 200°C
Temperature range: -40°C bis 200°C
(400°C with metal seats)
Materials
Stainless steel 1.4408 n. EN10213-4
Materials
Options
Approvals/Certificates
• Body and ball made out from bar stock
(special material)
• PTFE Reinforced or metal seats
• Stem extention with T-Lever
• Cavity filler
Options
CE - marking
TA-Luft approval acc. VDI 2440
Approvals/Certificates
XOMOX - ball valves
CE - marking
TA-Luft approval acc. VDI 2440
Type test approval
Fire safe acc. API607 4th ed.
XOMOX - ball valves
DN 15-100 (1/2“-4“)
Pressure range:
PN 16-63 up to 2“
PN 16-40 2”-4”
Temperature range: -40°C up to 200°C
Carbon steel 1.0619 and Stainless steel 1.4408 acc. EN 10213-4
Carbon steel A216-WCB and Stainless steel A351-CF8M
• Body and ball made out from bar stock
(special material)
• PTFE Reinforced seats or metal seats
• Stem extention with T-Lever
• Steam jacket (KVL only)
Sizes:
Materials
Carbon steel 1.0619 and
Stainless steel 1.4408 n. EN10213-4
Options
• PTFE reinforced seats
• Stem extention with T-Lever
Approvals/Certificates
CE - marking
TA-Luft approval acc. VDI 2440
XOMOX - ball valves
PL_Kugelhähne_Xomox_engl
28.08.2003
7:02 Uhr
Seite 2
Process Valves & Actuators
Technical Data
Process Valves & Actuators
Process Valves & Actuators
Compact Ball Valve Type KK 1
Flange Ball Valve Type KVA, KVL, KVK
3 pcs Body Ball Valve Type 240-70
Design Features & Benefits
• Space saving and light design
• Economic
• Ideal for use in compact piping systems
• Maintenance-free design
• Low torque
• Minimized body cavity
• Investment cast body
• Full bore
• TA-Luft approved, anti-blow out S2 stem design
• Compact body design
• ISO 5211 actuator assembly flange
• Antistatic device
• Stainless steel lever
Design Features & Benefits
• Modular construction DIN, ANSI
• Maintenance - free
• Low torques
• Minimized body cavity
• Split body design
• Investment cast body
• Face to face acc. DIN EN558-1 (F4 & F1)
and ANSI B16.10
• Full bore
• TA-Luft approved, anti-blow out S2 stem design
• ISO 5211 actuator assembly flange
• Antistatic device
• Stainless steel lever
• Lever locking device
Design Features & Benefits
• Modular construction
• Light and economic design
• Ideal for use in compact piping systems
• Maintenance - free
• Low torques
• Swing out body design for easy and servicefriendly maintenance and repair works
• 3 pcs body design, investment cast
• Full bore
• TA-Luft approved, anti-blow out S2 stem design
• ISO 5211 actuator assembly flange
• Antistatic device
• Stainless steel lever
• Lever locking device
Available connections:
- GAS or NPT Female threads
- Butt weld or socket weld ends
- Extended butt welded ends
- Flanged ends
Sizes:
DN 15-100 (1/2“-4“)
Pressure range:
PN 16-40
Technical Data
Sizes:
DN 15-100 (1/2“-4“)
Pressure range:
PN 16-40
ANSI Cl. 150-300
Technical Data
Temperature range: -40°C bis 200°C
Temperature range: -40°C bis 200°C
(400°C with metal seats)
Materials
Stainless steel 1.4408 n. EN10213-4
Materials
Options
Approvals/Certificates
• Body and ball made out from bar stock
(special material)
• PTFE Reinforced or metal seats
• Stem extention with T-Lever
• Cavity filler
Options
CE - marking
TA-Luft approval acc. VDI 2440
Approvals/Certificates
XOMOX - ball valves
CE - marking
TA-Luft approval acc. VDI 2440
Type test approval
Fire safe acc. API607 4th ed.
XOMOX - ball valves
DN 15-100 (1/2“-4“)
Pressure range:
PN 16-63 up to 2“
PN 16-40 2”-4”
Temperature range: -40°C up to 200°C
Carbon steel 1.0619 and Stainless steel 1.4408 acc. EN 10213-4
Carbon steel A216-WCB and Stainless steel A351-CF8M
• Body and ball made out from bar stock
(special material)
• PTFE Reinforced seats or metal seats
• Stem extention with T-Lever
• Steam jacket (KVL only)
Sizes:
Materials
Carbon steel 1.0619 and
Stainless steel 1.4408 n. EN10213-4
Options
• PTFE reinforced seats
• Stem extention with T-Lever
Approvals/Certificates
CE - marking
TA-Luft approval acc. VDI 2440
XOMOX - ball valves
PL_Kugelhähne_Xomox_engl
28.08.2003
7:01 Uhr
Seite 1
Process Valves & Actuators
CRANE
Process Valves & Actuators
S2 Stem Double-Sealing System
Efficient primary stem
sealing by spherical segment ring (TA-Luft approved).
Design Benefits:
• No external leakage
• Significantly reduced
operation and maintenance costs
• No media trapped between primary and secondary seal
• Low torque
XOMOX
Products Profile
XOMOX
Worldwide Manufacturing,
Sales and Service
Sleeved Plug Valves
Europe / Middle East / Africa / America
DIN and ANSI versions.
On-Off-valves, Multiport valves (3 to 5-way valves).
Jacketed valves.
Metallic Ball Valves
DIN and ANSI versions.
On-Off-valves, multiport valves (3 to 5-way valves).
Special valves.
High Performance Butterfly Valves
DIN and ANSI versions.
PTFE, FIRESAFE and metal seat DN 50 to DN 2550,
NPS 2 to 102, WAFER- and LUG-design.
Fully Lined Plug Valves
DIN and ANSI versions.
On-Off-valves, FEP and PFA lining.
Multiport valves (3 to 5-way valves).
Jacketed valves.
Fully Lined Ball Valves
FIRE SAFE X-Seal
Option
Body gasket
DIN and ANSI versions.
PFA- and FEP-lining.
Fully Lined Butterfly Valves
DIN and ANSI versions.
WAFER- and LUG design, PFA-, FEP- and PTFE-lining.
Other Fully Lined Valves
Check valves, sight glasses, filters and strainers,
dip pipes and PTFE gaskets.
Control Valves
Control valves for precise throttling service.
Actuators and Accessory
XOMOX XRP-actuators for plug-, ball- and butterfly valves.
Complete actuation accessory packages.
Roughly compressed
XOMOX Burgkirchen
Tel.: (49) 8679-6092/93
Fax: (49) 8679-4944
[email protected]
XOMOX Göhren
Tel.: (49) 34638-6080
Fax: (49) 34638-60899
[email protected]
XOMOX Grevenbroich
Tel.: (49) 02181-4944-0
Fax: (49) 02181-4944-44
[email protected]
XOMOX Norderstedt
TEL.: (49) 40-526860-0
FAX: (49) 40 526860-33
[email protected]
XOMOX Wachenheim
Tel.: (49) 06322-9465-0
Fax: (49) 06322-9465-20
[email protected]
BELGIE/BELGIQUE
XOMOX Belgium
Tel.: (32) 3-6468675/
3-6451796
Fax: (32) 3-6441975
[email protected]
PROMETAL N.V.
Tel.: (32) 3-2051320
Fax: (32) 3-2328434
Fully compressed
Graphite outside ring + Metal ring + TFM-inside ring
Stem seal (spherical seal)
BUNDESREPUBLIK
DEUTSCHLAND
XOMOX International
GmbH & Co
Tel.: (49) 8382-702-0
Fax: (49) 8382-702-144
[email protected]
Option
Design Benefits
• Fire-tested and chemical resistant sealing
No contact of graphite parts with flow media
• Maximum tightness to the atmosphere in
operating condition and fail case (fire, etc.)
• Low space requirements
• Cost-efficient solution
Metallic Delta ring + PTFE
Detailed technical information providing comprehensive data is available
on request.
XOMOX Your Partner in Valves
Continuous improvement is the foundation of our
EN ISO 9001 certified Quality Process. We believe that
continuous improvement is necessary at all levels and
in all functions across the organization.
Our Quality Process relies on effective teamwork
between our customers, employees, suppliers,
representatives and communities.
www.xomox.de
Process Valves & Actuators
XOMOX International GmbH & Co.
XOMOX - ball valves
CESKA REPUBLIKA
XOMOX
Tel.: (420) 558 877 146
Fax: (420) 558 877 146
ESPANA
XOMOX International
GmbH & Co. OHG
Sucursal en España
Tel.: (34) 93 786 92 50
Fax: (34) 93 785 98 51
[email protected]
ÖSTERREICH
XOMOX International
Ges.mbH
Tel.: (43) 732-652400/
732-661086
Fax: (43) 732-665541
[email protected]
FRANCE
XOMOX France S.A.
Tel.: (33) 389-611361
Fax: (33) 389-064011
[email protected]
POLSKA
XOMOX
Tel.: (48) 32-2873428
Fax: (48) 32-2873428
XOMOX Agence Paris
Tel.: (33) 164920113
Fax: (33) 169920118
[email protected]
HUNGARIA
XOMOX
MAGYARORSZAG KFT
Ceh u. 1.
8000 Székesverhérvár
Tel.: (36) 06-22-513-100
Fax: (36) 06-22-513-131
[email protected]
ITALIA
CRANE PROCESS FLOW
TECHNOLOGIES S.r.l.
Division XOMOX Italia
Tel.: (39) 039 2704373
Fax: (39) 039 2704450
lorenzo_bisogno_xomox@
craneflow.com
MIDDLE EAST
XOMOX Germany
Tel.: (49) 8382-702-0
Fax: (49) 8382-702-216
[email protected]
NEDERLAND
XOMOX Nederland
Tel.: (31) 181-618100
Fax: (31) 181-614100
[email protected]
NORGE
XOMOX Norge
Tel.: (47)231-73500
Fax: (47)231-73501
[email protected]
RUSSIA
XOMOX
Tel.: (7) 095-9265406
(7) 095-202 6919
Fax: (7) 095-202 6919
[email protected]
SCHWEIZ
XOMOX AG
Tel.: (41) 61-4859550
Fax: (41) 61-4859555
[email protected]
SUOMI/FINLAND
XOMOX Finland GmbH & Co.
Sivuliike Suomessa
Tel.: (358)14-3385000
Fax: (358)14-3385050
[email protected]
SVERIGE
XOMOX Sverige
Tel.: (46) 303-88980
Fax: (46) 303-88982
[email protected]
UNITED KINGDOM
XOMOX Ltd.
Tel.: (44) 1271-311111
Fax: (44) 1271-322022
[email protected]
USA
XOMOX Cincinnati
Te.l: (1) 513 745-6000
Fax: (1) 513-745-6972
www.xomox.com
Further manufacturing, sales and service in:
USA, Brasil, Canada, China, India, Japan, Korea, Mexico and Singapore
XOMOX
Service and Automation Center
Our EN ISO 9001 certified Service and Automation Centers
offer comprehensive service, including valve automation, repair,
modification, accessory packaging and other services. We also have
standard valves, spare and accessory parts in stock.
Our Service and Automation Centers offer our customers
complete service and quick turnaround for the most urgent
requirements.
Von-Behring-Straße 15
D-88131 Lindau/Bodensee
Telefon: (49) 8382-702-0
Fax: (49) 8382-702-144
[email protected]
Subject to technical modifications.
Ball Valves
A Crane Co. Company
© XOMOX-XP-MBV-GB-09/03
Printed in Austria
Process Valves & Actuators
PL_Kugelhähne_Xomox_engl
28.08.2003
7:01 Uhr
Seite 1
Process Valves & Actuators
CRANE
Process Valves & Actuators
S2 Stem Double-Sealing System
Efficient primary stem
sealing by spherical segment ring (TA-Luft approved).
Design Benefits:
• No external leakage
• Significantly reduced
operation and maintenance costs
• No media trapped between primary and secondary seal
• Low torque
XOMOX
Products Profile
XOMOX
Worldwide Manufacturing,
Sales and Service
Sleeved Plug Valves
Europe / Middle East / Africa / America
DIN and ANSI versions.
On-Off-valves, Multiport valves (3 to 5-way valves).
Jacketed valves.
Metallic Ball Valves
DIN and ANSI versions.
On-Off-valves, multiport valves (3 to 5-way valves).
Special valves.
High Performance Butterfly Valves
DIN and ANSI versions.
PTFE, FIRESAFE and metal seat DN 50 to DN 2550,
NPS 2 to 102, WAFER- and LUG-design.
Fully Lined Plug Valves
DIN and ANSI versions.
On-Off-valves, FEP and PFA lining.
Multiport valves (3 to 5-way valves).
Jacketed valves.
Fully Lined Ball Valves
FIRE SAFE X-Seal
Option
Body gasket
DIN and ANSI versions.
PFA- and FEP-lining.
Fully Lined Butterfly Valves
DIN and ANSI versions.
WAFER- and LUG design, PFA-, FEP- and PTFE-lining.
Other Fully Lined Valves
Check valves, sight glasses, filters and strainers,
dip pipes and PTFE gaskets.
Control Valves
Control valves for precise throttling service.
Actuators and Accessory
XOMOX XRP-actuators for plug-, ball- and butterfly valves.
Complete actuation accessory packages.
Roughly compressed
XOMOX Burgkirchen
Tel.: (49) 8679-6092/93
Fax: (49) 8679-4944
[email protected]
XOMOX Göhren
Tel.: (49) 34638-6080
Fax: (49) 34638-60899
[email protected]
XOMOX Grevenbroich
Tel.: (49) 02181-4944-0
Fax: (49) 02181-4944-44
[email protected]
XOMOX Norderstedt
TEL.: (49) 40-526860-0
FAX: (49) 40 526860-33
[email protected]
XOMOX Wachenheim
Tel.: (49) 06322-9465-0
Fax: (49) 06322-9465-20
[email protected]
BELGIE/BELGIQUE
XOMOX Belgium
Tel.: (32) 3-6468675/
3-6451796
Fax: (32) 3-6441975
[email protected]
PROMETAL N.V.
Tel.: (32) 3-2051320
Fax: (32) 3-2328434
Fully compressed
Graphite outside ring + Metal ring + TFM-inside ring
Stem seal (spherical seal)
BUNDESREPUBLIK
DEUTSCHLAND
XOMOX International
GmbH & Co
Tel.: (49) 8382-702-0
Fax: (49) 8382-702-144
[email protected]
Option
Design Benefits
• Fire-tested and chemical resistant sealing
No contact of graphite parts with flow media
• Maximum tightness to the atmosphere in
operating condition and fail case (fire, etc.)
• Low space requirements
• Cost-efficient solution
Metallic Delta ring + PTFE
Detailed technical information providing comprehensive data is available
on request.
XOMOX Your Partner in Valves
Continuous improvement is the foundation of our
EN ISO 9001 certified Quality Process. We believe that
continuous improvement is necessary at all levels and
in all functions across the organization.
Our Quality Process relies on effective teamwork
between our customers, employees, suppliers,
representatives and communities.
www.xomox.de
Process Valves & Actuators
XOMOX International GmbH & Co.
XOMOX - ball valves
CESKA REPUBLIKA
XOMOX
Tel.: (420) 558 877 146
Fax: (420) 558 877 146
ESPANA
XOMOX International
GmbH & Co. OHG
Sucursal en España
Tel.: (34) 93 786 92 50
Fax: (34) 93 785 98 51
[email protected]
ÖSTERREICH
XOMOX International
Ges.mbH
Tel.: (43) 732-652400/
732-661086
Fax: (43) 732-665541
[email protected]
FRANCE
XOMOX France S.A.
Tel.: (33) 389-611361
Fax: (33) 389-064011
[email protected]
POLSKA
XOMOX
Tel.: (48) 32-2873428
Fax: (48) 32-2873428
XOMOX Agence Paris
Tel.: (33) 164920113
Fax: (33) 169920118
[email protected]
HUNGARIA
XOMOX
MAGYARORSZAG KFT
Ceh u. 1.
8000 Székesverhérvár
Tel.: (36) 06-22-513-100
Fax: (36) 06-22-513-131
[email protected]
ITALIA
CRANE PROCESS FLOW
TECHNOLOGIES S.r.l.
Division XOMOX Italia
Tel.: (39) 039 2704373
Fax: (39) 039 2704450
lorenzo_bisogno_xomox@
craneflow.com
MIDDLE EAST
XOMOX Germany
Tel.: (49) 8382-702-0
Fax: (49) 8382-702-216
[email protected]
NEDERLAND
XOMOX Nederland
Tel.: (31) 181-618100
Fax: (31) 181-614100
[email protected]
NORGE
XOMOX Norge
Tel.: (47)231-73500
Fax: (47)231-73501
[email protected]
RUSSIA
XOMOX
Tel.: (7) 095-9265406
(7) 095-202 6919
Fax: (7) 095-202 6919
[email protected]
SCHWEIZ
XOMOX AG
Tel.: (41) 61-4859550
Fax: (41) 61-4859555
[email protected]
SUOMI/FINLAND
XOMOX Finland GmbH & Co.
Sivuliike Suomessa
Tel.: (358)14-3385000
Fax: (358)14-3385050
[email protected]
SVERIGE
XOMOX Sverige
Tel.: (46) 303-88980
Fax: (46) 303-88982
[email protected]
UNITED KINGDOM
XOMOX Ltd.
Tel.: (44) 1271-311111
Fax: (44) 1271-322022
[email protected]
USA
XOMOX Cincinnati
Te.l: (1) 513 745-6000
Fax: (1) 513-745-6972
www.xomox.com
Further manufacturing, sales and service in:
USA, Brasil, Canada, China, India, Japan, Korea, Mexico and Singapore
XOMOX
Service and Automation Center
Our EN ISO 9001 certified Service and Automation Centers
offer comprehensive service, including valve automation, repair,
modification, accessory packaging and other services. We also have
standard valves, spare and accessory parts in stock.
Our Service and Automation Centers offer our customers
complete service and quick turnaround for the most urgent
requirements.
Von-Behring-Straße 15
D-88131 Lindau/Bodensee
Telefon: (49) 8382-702-0
Fax: (49) 8382-702-144
[email protected]
Subject to technical modifications.
Ball Valves
A Crane Co. Company
© XOMOX-XP-MBV-GB-09/03
Printed in Austria
Process Valves & Actuators