Wound Depth Cartridges Westco Filters

Transcription

Wound Depth Cartridges Westco Filters
Wound Depth Cartridges
Westco Filters wound cartridges provide true depth filtration utilizing hundreds of tapered filtering
passages of controlled size and shape. Each layer of roving contributes to true depth filtration by trapping
its share of particles. Wound cartridges offer a gradual pressure increase during cartridge life versus
surface-type media that have an abrupt flow cutoff when loaded. In addition, the irregular outer layer
reduces surface blinding, assuring both longer cartridge life and full cartridge utilization. Effective removal
ratings at nominal 75-90% efficiency from 0.5µm to 200µm range.
Benefits
• A broad range of media provide excellent
compatibility with a variety of organic solvents,
animal, petroleum and vegetable oils
• Optional core covers and end treatments
assure fiber migration control
• Multiple length cartridges minimize change out
time, eliminate spacers and are available to fit
competitive filter vessels
• Continuous strand winding geometry provides
performance consistency
• One-piece metal extended center core option
eliminates the need for cartridge guides in all competitive
and multi-cartridge vessels
• A special snap-in extender is available for polypropylene cores
Applications

Chemicals

Photographic

Food & Beverage

Water

Oils
Pharmaceuticals
Plating
Edible Oils
Paint & Inks
Waste Water
Dimensions
Outside Diameter…………..2.37 inches (6.4cm)
Inside Diameter……………..……..1inch (2.7cm)
Lengths……………………………..9.75 to 50 inches
Recommended Operating Conditions
Change out P………………….……….25 psid
Max Pat ambient temp…………...60 psid
Max temperature dependent on material
of construction
How to Order:
MaxPro
Filter Media
M
PO = Industrial Polypro
Micron Rating
0.5
Core
50
P = Polypro
Length
9 = 9-3/4”
Ext Core
Blank = None DOE
FPO= FDA Polypro
1
75
T = Tin Core
10 = 10”
PE = Polyester
3
100
4S = 304SS
19 = 19-1/2”
TXC= Tinned Steel Ext
C = Cotton
BC = Bleached Cotton
5
10
200
6S = 316SS
20 = 20”
29 = 29-1/4”
SXC = Stainless Ext
PSP – Polypro Spring
N = Nylon
20
30 = 30”
2C = SOE 222/Cap
G - Glass
25
39 = 39”
6C = SOE 226/Cap
30
40 = 40”
Example: WPO 10 P 20
PXC = Polypro Ext
(Polypropylene – 10 micron – Poly Core – 20”Length – Doe)