FIVE BOW SPECIFICATION GUIDE

FIVE BOW
SPECIFICATION GUIDE
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
FIVE BOW
Page 1 of 2
TYPE:
Specification and Ordering Information:
1. Style:
q
q
q
FBU - Indirect (FBU)
FBD - Direct (FBD)
FBW - Wall (FBW)
2. Overall Run Length:
q
q
3. Lamping
Individual (2’,3’,4’,5’,6’,7’,8’)
Continuous (Enter total run length, i.e 20’)
q FSO - Fluorescent - Standard Output (FSO)
q FHO - Fluorescent - High Output (FHO)
q LEDW5 - LED White 3000° 5W/LF (LEDW5)
q LEDW10 - LED White 3000° 10W/LF (LEDW10)
q HP7- 80 LPW High Performance LED White 3500° 7W/LF (HP7)
q HP14- 80 LPW High Performance LED White 3500° 14W/LF (HP14)
q RGB - LED Color Changing (RGB)-Consult Factory for Control Interface Options
q LXHO - Seamlessline lamp (LXHO Feelux High Output)*
q LXHE - Seamlessline lamp (LXHE Feelux High Efficiency)*
*See Option 1A
9
9
2 16"
2 16"
4. Ballast Specification:
q LED - LED Power Supply, non-dim (LED)
q LED-DIM - LED Power Supply with 0-10V dimming (LEDDIM)
q STD - Standard Electronic, non-dim <10%THD (STD)
q * MK7 - Advance Mark 7® Dimming 0-10V (MK7)
q * MK10 - Advance Mark 10® Dimming (MK10)
q * HILUME - Lutron Hilume 3-D® (HILUME3D)
q * HSeries- Lutron H-SERIES® Dimming (HSERIES)
q * ECOSYS- Lutron ECOSYSTEM® Dimming (ECOSYS)
q * BALSTAR - Ballastar® Light level switching (BALSTAR)
q * USD - Superdim® Dimming (USD)
q * QUICK - Osram Quicktronic® Dimming (QUICK)
3
1 4"
3
1 4"
FBU (INDIRECT)
FBD (DIRECT)
FBW (WALL)
*Please consult ballast manufacturer for lamp/ballast compatability.
Note: Please consult ballast manufacturer for lamp/ballast compatability
5. Accessory Option:
q None (N/A)
q Lens (LENS)
q Perf Louver (PF)
6. Voltage:
7. Finish:
q
q
q
q
q
q
q
q
Perforated
(PF)
Lens
(LENS)
120 (120V)
277 (277V)
UNV (120/277 V)
347 (347V non-dim only))
* AL (Natural “Ultimatte” aluminum)
BK (Black powdercoat)
WH (White powdercoat)
RAL (Specify RAL # of powdercoat of your choice)
*1A - Option: Seamlessline Lamp (LX) End to End Lamp Mounting
*Channel dimensions identical to standard T5 lamping. Luminous
ends eliminate the need for staggered lamping. Consult factory
for additional details.
* AL is standard on all Five Bow product
8. Additional Options:
q OS - Occupancy Sensor
q PH - Photocell - Consult Factory (OS)
q REM - Emergency Ballast (EM)
8ft suspension hardware standard
Canopy to cover 4-O box
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com
FIVE BOW
Page 2 of 2
TYPE:
Standard: Pendant Wire Mounting with adjustable aircraft cable suspension
*4-1/2” dia. canopy
to cover 4-O Octagon Junction box Bullet Aircraft cable
suspension.
*Adjustable GripLock cable suspension
Option: Seismic Bracing
Option: Mitered Angles
Aircraft cable can
mount on side of
channel to seismic
anchoring.
Consult Factory for
angle options.
*8FT suspension hardware is standard on all
ALW suspended fixtures
Colors and Finishes:
RAL
STANDARD: “Ultimatte” Natural aluminum : A two step,
clear anodizing
process that creates
a smooth and
durable surface.
180
OPTION: Black - BK
powdercoat
OPTION: White - WH
powdercoat
OPTION: RAL - powdercoat the RAL
color of your choice.
Specify RAL code.
Design Specifications
Construction
Extruded architectural grade T6061 aluminum. Minimum wall thickness is .080” 100% recyclable.
Single piece construction aluminum louver with clear matte anodized finish.
Electrical Details
All ballasts are electronic <10% THD
Class P electronic ballasts - Programmed start
Standard and dimming ballasts are integral to channel (unless otherwise noted).
LED options available (consult factory)
Multiple interface options available including dimming, motion sensing, daylight harvesting and DALI.
ETL Listed
Non-lensed units rated for Indoor location only.
Lensed units rated for damp location.
Emergency
Fixtures can be wired for emergency circuit or emergency battery
backup.
Emergency one-lamp ballasts provide 90 minutes of illumination.
T5/T5HO = Initial output of 1300 Lumens
All fixtures are standard in Ultimatte aluminum finish (AL) - A deep
etch and two-step clear anodizing process that gives a smooth,
clean and durable surface.
Powder Coat options are available. Consult factory.
120
150
90
Spacing Criterion
1.2
1.7
Efficiency
82.2 %
150
60
300
450
0
Catalog # FBD-4-LV
ACROSS
45
ALONG
30
Architectural Lighting Works reserves the right to make changes to fixture design, finish and engineering at any time.
www.archltgworks.com