HP Insight Management 7.4 Support Matrix - Hewlett

Transcription

HP Insight Management 7.4 Support Matrix
Abstract
Abstract
This document lists the minimum hardware, firmware, and software requirements for installing and running HP Insight
Management, integrated server management software.
HP Part Number: 709941-008c
Published: December 2014
Edition: 4
© Copyright 2009, 2014 Hewlett-Packard Development Company, L.P.
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial
Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under
vendor's standard commercial license.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Acknowledgments
Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated. AMD™ is a trademark of Advanced Micro Devices, Inc. Itanium® is a
trademark of Intel Corporation in the U.S. and other countries. Microsoft®, Windows®, Windows XP®, and Windows Vista® are U.S. registered
trademarks of Microsoft Group of Companies. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. UNIX® is a registered
trademark of The Open Group.
EMC, SYMMETRIX®, VMAX® are either registered trademarks or trademarks of EMC Corporation in the United States and/or other countries
Warranty
HP will replace defective delivery media for a period of 90 days from the date of purchase. This warranty applies to all Insight Management
products.
Contents
1 New and deprecated support......................................................................6
New software support...............................................................................................................6
Deprecated software support.....................................................................................................6
Deprecated CMS Operating System.......................................................................................6
Deprecated Hypervisors........................................................................................................7
Deprecated Managed node support.......................................................................................7
Deprecated database support...............................................................................................7
New hardware support.............................................................................................................7
Servers that can be managed by Insight Management..............................................................7
New storage support............................................................................................................8
Deprecated hardware support....................................................................................................8
2 Management servers...................................................................................9
Hardware and firmware ...........................................................................................................9
CMS hardware....................................................................................................................9
CMS memory ..............................................................................................................10
CMS disk space ...........................................................................................................10
Management capabilities of a CMS with a maximum tested configuration............................11
CMS firmware .............................................................................................................13
Insight Control server provisioning .......................................................................................13
Software ...............................................................................................................................15
CMS software...................................................................................................................15
CMS operating systems..................................................................................................15
Additional language support for the HP Insight Management products.................................18
CMS supported hypervisors............................................................................................18
Other prerequisite software ...........................................................................................19
CMS supported databases.............................................................................................20
Supported CMS configurations in a Microsoft Windows domain.........................................21
KVM virtual machine provisioning........................................................................................22
Insight Control server provisioning software...........................................................................22
Additional management server requirements.........................................................................22
Supported browsers.......................................................................................................22
Recommended screen resolution......................................................................................23
3 Management servers in a high-availability environment.................................24
CMS in a HA environment.......................................................................................................24
CMS supported cluster environments....................................................................................24
Insight Management components supported in a CMS highly available environment...................24
CMS cluster configuration ..................................................................................................25
Unsupported items in a CMS cluster configuration..................................................................26
4 Managed systems hardware .....................................................................27
Public cloud providers.............................................................................................................27
Supported HP BladeSystem enclosures.......................................................................................27
Supported servers ..................................................................................................................27
HP ProLiant servers.............................................................................................................27
HP Integrity servers............................................................................................................34
Other HP servers................................................................................................................36
Third-party servers..............................................................................................................36
Supported storage products.....................................................................................................37
Fibre channel storage and switch recommendations................................................................40
iSCSI SAN........................................................................................................................41
iSCSI targets as backing storage for VM guests.................................................................41
Contents
3
iSCSI device references..................................................................................................41
iSCSI LAN/VLAN switches.............................................................................................41
Storage options for virtual machine guests.............................................................................42
Matrix OE support in VMware VXLAN environments..........................................................42
Flat SAN......................................................................................................................42
Matrix OE storage support..................................................................................................43
Storage support for Matrix OE Provisioning......................................................................43
Storage support for Matrix recovery management..............................................................44
Supported hardware network products......................................................................................44
Network switches...............................................................................................................44
HP Virtual Connect Enterprise Manager hardware .....................................................................44
Other supported hardware......................................................................................................45
5 Managed system firmware ........................................................................46
Service Pack for ProLiant..........................................................................................................46
Integrity Support Packs............................................................................................................47
Insight Management firmware recommendations.........................................................................47
6 Managed systems software .......................................................................48
HP software integration ..........................................................................................................48
Supported operating systems....................................................................................................48
Microsoft Windows............................................................................................................48
Linux................................................................................................................................53
HP-UX, HP NonStop, and HP OpenVMS...............................................................................56
AIX, Solaris, and Netware..................................................................................................57
Supported hypervisor hosts and VM guests................................................................................57
Memory/CPU Hot Plug capabilities information..........................................................................62
VMware vCenter limitations for Memory/CPU Hot Plug capabilities..........................................62
7 Managed systems agents and providers .....................................................65
Agents and providers bundled with Matrix OE...........................................................................65
Agents and providers for OpenVMS managed systems...........................................................66
8 Support and other resources......................................................................68
Information to collect before contacting HP.................................................................................68
How to contact HP..................................................................................................................68
Security bulletin and alert policy for non-HP owned software components......................................68
Subscription service............................................................................................................68
Registering for software technical support and update service.......................................................68
How to use your software technical support and update service...............................................69
HP authorized resellers............................................................................................................69
New and changed information in this edition.............................................................................69
Related information.................................................................................................................69
Typographic conventions.........................................................................................................70
9 Documentation feedback ..........................................................................71
A Hardware requirements and supported capabilities for Insight Control power
management..............................................................................................72
Power management capabilities...............................................................................................72
Server requirements and supported capabilities for Insight Control power management...................72
Supported power-delivery devices for Insight Control power management......................................84
B Hardware requirements and caveats for Insight Control server migration..........85
Storage controllers that Insight Control server migration supports...................................................85
Converged network adapters that Insight Control server migration supports....................................87
Network interface cards that Insight Control server migration supports...........................................88
File system types that Insight Control server migration supports......................................................91
4
Contents
Caveats for Linux server migrations...........................................................................................91
Supported storage adapters for manual boot of a destination virtual machine.................................92
Additional Insight Control server migration information................................................................92
C Hardware requirements and caveats for Insight Control server provisioning......94
Adapters, controllers, and network cards that Insight Control server provisioning supports................94
D HP-UX CMS requirements..........................................................................98
HP-UX CMS requirements.........................................................................................................98
Agents and providers bundled with the Matrix Operating Environment.........................................101
Acronyms and abbreviations.......................................................................102
Index.......................................................................................................104
Contents
5
1 New and deprecated support
NOTE: HP Insight Control server deployment is no longer available. It has been replaced by HP
Insight Control server provisioning, which is available as a separate download from www.hp.com/
go/insightupdates. The last released version of HP Insight Control server deployment was 7.3
Update 1, and support information for that release is contained in the HP Insight Management 7.3
Update 1 Support Matrix found at http://www.hp.com/go/insightcontrol/docs.
NOTE: KVM Private Cloud Configuration wizard has been removed from the Matrix infrastructure
orchestration home page; connections to KVM private clouds must be configured manually, as for
other external cloud providers.
New software support
This release introduced support for new versions of already-supported software on the Central
Management Server (CMS) and managed systems.
Table 1 New software support
Software type
CMS software
Managed system software
Browsers
None
None
Databases
Microsoft SQL 2008 SP4
Microsoft SQL Express 2012 SP1
• Microsoft Windows 7 SP1 Professional and Enterprise
Operating
systems
Hypervisors
• RHEL 7
• VMware ESXi 5.0 Update 3
• VMware vSphere 5.5 Update 2
• KVM on RHEL 7
Virtualization
management
software
VMware vCenter Server 5.5 Update 1 and
Update 2
VMware vCenter Server 5.5 Update 2
NOTE: For additional new features in this release, see the HP Insight Control 7.4 Release Notes
and the HP Matrix Operating Environment 7.4 Release Notes at HP Enterprise Information Library.
Deprecated software support
Following software support is deprecated for this release:
Deprecated CMS Operating System
Microsoft Windows
6
•
Microsoft Windows Storage Server 2008 SP2
•
Microsoft Windows Server 2008 Standard/Enterprise SP2
•
Microsoft Windows Storage Server 2012 R2
•
Microsoft Windows Server 2003 R2 Standard x86 SP2
•
Microsoft Windows Server 2008 R2 Standard/Enterprise
New and deprecated support
•
Microsoft Windows Server 2008 R2 Datacenter
•
Microsoft Windows Server 2008 R2 Datacenter SP1
Linux
•
Red Hat Enterprise Linux 5.7
•
•
•
•
SUSE Enterprise Linux 10 SP3
•
•
NOTE:
The deprecated Linux versions are for HP SIM only.
HP-UX
HP-UX 11.23 PA
Deprecated Hypervisors
•
VMware ESX/ESXi 4.0 Update 2
•
•
•
VMware ESXi 5.0
•
VMware ESXi 5.0 Update 1
•
VMware vSphere 5.1
Deprecated Managed node support
•
Windows 7 Professional and Enterprise x86 and x64
•
Windows XP Professional SP3 x86
Deprecated database support
•
Microsoft SQL Server 2008 SP3
•
Microsoft SQL Server 2008 R2 RTM
•
Microsoft SQL Server 2008 R2 SP2
New hardware support
This release introduced support for the following hardware.
Servers that can be managed by Insight Management
HP ProLiant and Integrity servers:
•
HP ProLiant BL460c Gen9
•
HP ProLiant DL160 Gen9
•
New hardware support
7
•
•
•
HP ProLiant ML350 Gen9
•
HP ProLiant XL230a Gen9
•
HP ProLiant XL220a Gen8 v2
•
•
•
•
HP ProLiant DL380z
•
HP ProLiant ML150 Gen9
New storage support
•
HP P6000 Command View Software 10.3.3, and 10.3.4
•
MSA 1040 Fibre Channel/iSCSI with GL200 firmware
•
SPM support for BNA 11.1.5 and 12.3.1
•
MSA P2000 G3 with TS251 firmware
•
MSA 2040 Fibre Channel/iSCSI/SAS with GL200 firmware
•
HP FlexFabric 20Gb 2-port 650M Adapter
•
HP FlexFabric 20Gb 2-port 650FLB Adapter
•
HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter
•
HP Emulex 10Gb 2-port Standup Converged Network Adapter
•
•
HP Smart Array Gen9 controllers
•
Gen9 SAS Expander
•
B140i SATA Controller
•
3PAR OS 3.1.3 MU1
•
3PAR OS 3.2.1 for Storeserv 10000, Storeserv 7000
•
3PAR OS 3.2.1 MU1 on StoreServ 7000 and 10000
Deprecated hardware support
Storage support
HP 6000 Command View 9.4, 9.4.1, 10.0, 10.1
8
New and deprecated support
2 Management servers
This chapter provides the minimum hardware and software requirements for two management
servers:
•
A required CMS
•
An optional HP Insight Control server provisioning management server. For ProLiant customers
wanting to perform multi-server operating system provisioning to bare metal ProLiant and
BladeSystem servers, Insight Control server provisioning is an optional VM appliance.
NOTE: For ProLiant customers wanting to manage a KVM cloud, Matrix 7.4 can create and
manage KVM virtual machines in HP CloudSystem 8 resource pools in the same manner as for
other external cloud providers. For more information about HP CloudSystem 8 see the documentation
at: http://www.hp.com/go/CloudSystem/docs
Hardware and firmware
CMS hardware
Table 2 (page 9) lists the hardware requirements for a single-server CMS.
For information about using HP Insight Remote Support with HP SIM, system requirements and
product support, see the Insight Remote Support documentation at http://www.hp.com/go/
insightremotesupport/docs.
Table 2 CMS hardware requirements
Hardware
component
Server
Requirement
Any supported HP ProLiant server that fulfills the CPU, memory, and disk space requirements specified
in this chapter.
HP Systems Insight Manager, HP Insight Control virtual machine management, and the HP Matrix
Operating Environment (Matrix OE) also support operating a CMS in a virtual machine. This
configuration requires the CMS to be running a supported operating system listed in“CMS operating
systems” (page 15) and a supported hypervisor listed in “CMS supported hypervisors” (page 18).
Processor
At least 1.6 GHz (2 GHz or faster recommended).
For Matrix OE, four or more processing cores are required with a minimum of 1.6 GHz processors.
The recommended configuration is eight processing cores at 2.4 GHz or later.
Memory
For memory requirements, see Table 3 (page 10).
Disk space
For disk space requirements, see Table 4 (page 10).
File structure
NTFS
1
DVD drive
1
Local or mapped DVD drive or an ISO mounting utility.
The target directory must be on a local hard disk drive.
NOTE: For the requirements for configuring the CMS as a two-node Failover Cluster, see
“Management servers in a high-availability environment” (page 24).
For the requirements for an Integrity-based CMS running an HP-UX OS, see “HP-UX CMS
requirements” (page 98).
9
CMS memory
Table 3 (page 10) lists the memory requirements on the CMS, which differ for 32-bit (x86) and
64-bit (x64) operating systems and differ based on whether Matrix OE is being installed.
Table 3 CMS memory requirements
Operating
system
architecture
x86
x64
1
2
3
Installation scenario
Required minimum
memory1
Recommended memory2
Systems Insight Manager and HP Insight Control power
management
6 GB
8 GB
Systems Insight Manager and Insight Control
8 GB
16 GB
Systems Insight Manager, Insight Control, and Matrix OE 16 GB
24 GB
Standalone installation of HP Virtual Connect Enterprise
Manager (VCEM)3
16 GB
8 GB
A warning message displays if the amount of memory is below this value, but the installation or upgrade will continue. However,
the physical memory (RAM) on a CMS must equal at least 4 GB on an x86 system or at least 6 GB on an x64 system, otherwise
the HP Insight Management installation or upgrade will not proceed.
Performance will be less than optimal if the CMS does not have the recommended amount of memory.
Customers using more than 1000 networks should use at least the recommended memory amount for VCEM.
NOTE: For information about using HP Insight Remote Support with HP SIM, system requirements
and product support, see the Insight Remote Support documentation at: http://www.hp.com/go/
insightremotesupport/docs
CMS disk space
Table 4 (page 10) lists the amount of available disk space on the CMS that is required to install
or upgrade Insight Management. The amount of available disk space depends on the software
products you select as well as the type of installation that is being performed (that is, a new
installation of a product, an upgrade of an existing product, or reuse of the same version of an
existing installed product).
If you are installing Insight Management on an alternate drive (that is, not the system drive where
the OS is installed), the HP Insight Management Installer needs an additional 8 GB of temp space.
The Insight Management Installer looks in the User temp location, so if an additional 8 GB is not
available, change the User temp variable to point to another location that has 8 GB of available
space. However, when you are installing on an alternate drive, the system drive still needs at least
1 GB of available disk space.
IMPORTANT: For an upgrade, the required disk space must be available on the original installation
drive. Be sure to check requirements before you begin an upgrade, because you might need to
expand the available space.
Table 4 CMS disk space requirements
Installation scenario
Required disk
space
Upgrade or reuse of all currently installed instances of Insight Management
11 GB
Upgrade or reuse of Systems Insight Manager in combination with new installations or upgrades of other products.
The Insight Management Installer dynamically calculates the disk space requirements based on the component
selections.
15 GB
New installation of Systems Insight Manager in combination with new installations or upgrades of other products. 18 GB
New installation from Insight Management DVD.
10
Management servers
18 GB
Table 5 (page 11) lists additional disk space considerations.
Table 5 CMS disk space considerations
Software component
Disk space requirement
Insight Control power management
Disk space is consumed by the storage of power history data for each supported system.
HP recommends allocating 12 MB per system per year of history.
For example, a total of 2000 power managed systems, monitored PDUs/PDRs, and
associated racks and data centers consume approximately 24 GB of disk space for one
year of power history data.
This disk space is consumed on the Microsoft SQL Server database server.
HP Capacity Advisor
Additional disk space is required for each workload to collect and preserve data for use
by HP Capacity Advisor.
For the default retention period of four years:
• Allocate 64.5 MB for each workload on each Windows or Linux managed system to
support agentless data collection.
• Allocate 34.7 MB for each workload on each HP-UX managed system.
HP Global Workload Manager
(gWLM)
Requires at least 1 GB of disk space.
If you intend to keep historical data, HP recommends allowing 4 GB for every 100
workloads managed by the Global Workload Manager.
If you are not interested in historical data, use the gWLM history --truncate
command to trim the historical database.
This space will be allocated on the Microsoft SQL Server database server.
HP Insight Remote Support
For information about using HP Insight Remote Support with HP SIM, system requirements
and product support, see the Insight Remote Support documentation at:
http://www.hp.com/go/insightremotesupport/docs
For recommendations on increased disk space requirements depending on how many
devices you are managing, go to http://www.hp.com/go/insightremotesupport/docs.
Select your supported version and access the HP Insight Remote Support Release Notes.
Management capabilities of a CMS with a maximum tested configuration
Table 6 (page 12) lists the management capabilities supported by the recommended x64 CMS
configuration that is running eight processing cores at 2.4 GHz with 24 GB RAM and 50 GB disk
space and a separate remote database server that is running with eight processing cores at 2.4
GHz with 16 GB RAM and 50 GB of disk space.
11
Table 6 CMS management capabilities
Item
Maximum configuration on an x64 CMS
Number of managed systems (physical • Systems Insight Manager: 5,000
servers and virtual machines)
• Insight Control: 5,000
• Matrix OE
◦
2,500 for a single CMS
◦
Federated configuration for a larger number of managed nodes:
– Limits when all logical servers are ProLiant managed nodes:
– 1 primary CMS and up to 4 secondary CMSs
– 2,500 nodes for each secondary CMS
– 2,000 nodes for the primary CMS
– 12,000 nodes maximum across primary and secondary CMS resource pools
– Limits when all logical servers are Integrity managed nodes:
– 1 primary CMS and up to 4 secondary CMSs
– 1,500 nodes for each secondary CMS
– 700 nodes for the primary CMS
– 6,000 nodes maximum across primary and secondary CMS resource pools
• Insight managed system setup wizard: 1,500
Concurrent users on the Systems Insight 15 concurrent users who are running general operations and one administrator task
Manager console
Virtual machine hosts
Virtual machine host counts can vary greatly because of the load factors of VMs on hosts.
The virtual machine guest/host count is limited only by the overall supported limits of
managed systems for HP SIM, Insight Control, and Matrix OE.
HP has qualified 70 virtual machine hosts through one CMS with Insight Control and
Matrix OE functionality.
Monitoring (by Systems Insight
Manager and Insight Control
performance management)
Simultaneous analysis of 3,000 managed systems
Power management
5,000 managed systems; 300 monitored PDUs/PDRs
Disaster recovery
Supports up to 2,500 disaster recovery protected logical servers in a two-site configuration
for VC-hosted and/or VM-hosted. Of the total of 2,500 logical servers there is a maximum
of 500 physical (VC-hosted) and 1500 Hyper-V VM-hosted logical servers.
Example 1
1.
2.
3.
4.
5.
2000 ESX VM-hosted logical servers and 500 VC-hosted logical servers
2200 ESX VM-hosted logical servers and 300 VC-hosted logical servers
2500 ESX VM-hosted logical serves
1500 Hyper-V VM-hosted logical servers
750 Hyper-V IO services each configured with 2 logical servers and 250 VMware
IO services each configured with 2 logical servers, and 500 VC-hosted logical servers
6. 500 VC-hosted logical servers, and 500 ESXi VM-hosted logical servers
NOTE: Matrix recovery management supports only virtual machines when provisioning
with IO services.
In a Federated Environment, Matrix recovery management is only supported on a primary
CMS at both the primary and DR sites. In other words, Matrix recovery management is
not supported on a secondary CMS. For additional information, see the HP Matrix
Operating Environment Recovery Management User Guide.
12
Management servers
Table 6 CMS management capabilities (continued)
Item
Maximum configuration on an x64 CMS
Capacity Advisor Data Collection
• Capacity planning data collected for 1,500 nodes
• Automated recommendations for 500 workloads in <15 minutes
• Detailed reports for 150 systems in <15 minutes
• Summary reports for 1,000 systems in <10 minutes
Virtual Connect Enterprise Manager
domains
Up to 250 single or multi-enclosure domains, up to a total of 1,000 BladeSystem c-Class
enclosures
CMS firmware
Table 7 Recommended firmware requirements for Insight Management
Item
Recommended firmware version
Intelligent Provisioning
2.00 (Gen9)
1.60 (Gen8)
1.61 (Gen8)
2.01 (Gen9)
Service Pack for ProLiant
2014.09.0
Onboard Administrator (OA) on the following HP BladeSystem
enclosures:
4.30
• c3000
• c3000 Tower enclosure
• c7000
• c7000 Platinum enclosure
Virtual Connect for BladeSystem c-Class
NOTE:
4.31
To download Virtual Connect firmware only, go to the following website:
http://h18004.www1.hp.com/products/blades/components/vcFor Virtual Connect firmware compatible with the Virtual Connect Enterprise Manager, see the HP Virtual Connect Enterprise
Manager User Guide at the following website:
HP Enterprise Information Library
HP iLO 2 for ProLiant BladeSystem
2.25
HP iLO 3 Advanced for ProLiant BladeSystem
1.80
2.02
Baseboard Management Controller (BMC) Firmware
5.38
HP Smart Update Manager (HP SUM)
7.1.0
NOTE: OA 4.30 should be used for enclosures with ProLiant, Integrity, or a mix of ProLiant and
Integrity server blades.
Insight Control server provisioning
Insight Control server provisioning is a VM appliance that runs on a separate VMware vSphere
(ESXi) or Microsoft Hyper-V host. It requires two IP addresses; a management address that is used
to connect to the appliance web interface and REST API, and a deployment IP that is used for
communicating with the target servers. The appliance can be configured in either single NIC
13
configuration where the two IPs share the same NIC, or a dual NIC configuration where each IP
is on a separate NIC.
In a single NIC configuration, both IP addresses must be in the same subnet and must have
connectivity to the target servers, the target server iLOs, and the media server. In a dual NIC
configuration, NIC1 is considered the management NIC and is used to connect to the appliance.
NIC2 is considered the deployment NIC and must have connectivity to the deployment NIC on
each target server and the media server. Connectivity to the target server iLOs can be through
either the deployment or management NIC.
Insight Control server provisioning requires a media server to store the OS distributions, Windows
captured images for image deployment, the full SPP version(s), and Intelligent Provisioning firmware.
The media server is a system separate from the Insight Control server provisioning appliance and
can be based on either Windows or Linux and be either a virtual machine or physical server, but
must be configured as described in the Insight Control server provisioning documentation found
on the HP website HP Enterprise Information Library. A special Media Server Setup Utility is provided
which will automate the configuration of a Windows system as a media server.
NOTE: Insight Control server provisioning and Insight Control server deployment cannot be active
on the same network at the same time because it makes use of PXE. It must be configured on
separate networks or only one can be actively configured for booting at a time.
Table 8 (page 14) lists the hardware requirements for Insight Control server provisioning based
on the size of the configuration (demo, small or large). At a minimum, the Insight Control server
provisioning appliance must have at least 4 CPUs, 16 GB memory, and 200 GB of disk space.
Table 8 Insight Control server provisioning VM resource requirements for vSphere (ESXi) or Hyper-V
Hardware component
POC/Demo
Small
Large
Server
Any ProLiant G6, G7, Gen8, or Gen9 server with an iLO processor
Processor
4
4
8
Memory
16 GB
16 GB
30 GB
Boot disk1
200 GB (Thin provisioned)
200 GB (Thick)
200 GB (Thick)
Data disk
Same as boot
Same as boot
Same as boot
Network adapter
A new appliance is configured with two network interfaces but can be configured to use one or
both of them. Appliances upgraded from a previous version will have a single interface, but can
have a second one added if desired.
1
CAUTION: HP strongly recommends using thick (VMware) or fixed size (Hyper-V) disk provisioning. If you use thin provisioning
and your VM host disk runs out of space, the appliance will crash and may not recover. You will need to install a new appliance
or restore from backup.
If you will be performing any of the following functions, Insight Control server provisioning requires
that a WinPE service OS be built and then uploaded to the appliance.
Insight Control server provisioning supports uploading either WinPE 3.1 or WinPE 4.0. See the
IC server provisioning Installation Guide for details on which version of WinPE is best for your
environment.
•
PXE booting the WinPE service OS
•
Windows installations using the PXE service OS
•
Any Windows image capture or deployment operations
•
Installing Windows to UEFI capable servers in Legacy BIOS boot mode
A WinPE generation utility is provided for each version of WinPE and must be run on a configured
Windows server. If your media server is a Windows system, you can use this same server to
generate the WinPE PXE image.
14
Management servers
NOTE: An uploaded WinPE PXE image is required (regardless of server model) for all Windows
capture or deployment operations .
Insight Control server provisioning solution limits and scalability
Insight Control server provisioning can support up to 5000 servers under management.
When running a Build Plan against multiple servers, a best practice is to select no more than 1000
servers at a time.
Across all running Build Plans, only 50 servers at a time will simultaneously be active. As processing
completes on the active servers, other servers in the queue will start up such that the number of
active jobs remains at no more than 50.
Insight Control server provisioning supported upgrade paths
The following table displays the supported upgrade paths for Insight Control server provisioning:
Table 9 Insight Control server provisioning supported upgrade paths
To 7.2.1
To 7.2.2
To 7.3.1
To 7.3.2
To 7.4
From 7.2
Yes
Yes
No
No
No
From 7.2.1
—
Yes
No
No
No
From 7.2.2
—
—
Yes
No
No
From 7.3.1
—
—
—
No
Yes
From 7.3.2
—
—
—
—
Yes
IMPORTANT: Matrix OE 7.4 supports IC server provisioning version 7.4. In addition, Matrix OE
7.3.2 also supports IC server provisioning version 7.4. If you decide to use Matrix OE 7.3.2 with
IC server provisioning version 7.4, you must also load SPP version 2014.06.0 on your IC server
provisioning Media Server, and be sure to use that when running Build Plans.
Table 10 Matrix OE and IC server provisioning supported versions
Matrix OE version
Supported IC server provisioning version Notes
7.2
7.2
Must use SPP version 2013.02.0
7.2.1
7.2.1
7.2.2
7.2.2
Must use SPP version 2013.09B.0 or
2013.09C.0
7.3
7.2.2
Must use SPP version 2013.09B.0 or
2013.09C.0
7.3.1
7.3.1
Must use SPP version 2014.02.0 or
2014.02b.0
7.3.2
7.3.1, 7.3.2, 7.4
7.4
7.4
Software
CMS software
CMS operating systems
This section lists the Microsoft Windows operating systems that are supported on the CMS.
Software
15
For information about using HP Insight Remote Support with HP SIM, system requirements and
product support, see the Insight Remote Support documentation at: http://www.hp.com/go/
insightremotesupport/docs
NOTE: HP Insight Remote Support version 5.x is not supported with HP SIM 7.4. You must first
upgrade to Insight Remote Support version 7.x before upgrading to HP SIM version 7.4.
In addition to U.S. English, the most recent service packs for the French, German, Italian, Spanish,
and Japanese language versions of the Windows Server operating systems listed in Table 11 (page
16), Table 12 (page 16), and Table 13 (page 17) are supported on the CMS. Furthermore, Systems
Insight Manager supports the Simplified Chinese version of Windows Server 2008 operating
systems.
NOTE: Insight Management can only be installed on drivers with 8dot3name enabled. In general,
the c:/ drive is the default setting and 8dot3name is enabled by default. If you wish to install
Insight Management on a Windows 2012 system on drives other than c:/ use the fsutil
command to check and enable 8dot3name. Execute the following:
fsutil8dot3name set v:0
Table 11 Microsoft Windows Server 2012 OS support on a CMS
Operating system version
Insight Management
Insight
Management
Installer
Systems
Insight
Manager
Insight Control
Matrix
OE
VCEM
Microsoft Windows Server 2012 R2 Standard
✓
✓
✓
✓
✓
Microsoft Windows Server 2012 R2 Data
Center
✓
✓
✓
✓
Microsoft Windows Server 2012 Standard
Edition
✓
✓
✓
✓
✓
Microsoft Windows Server 2012 Data Center
Edition
✓
✓
✓
✓
✓
✓
Table 12 Microsoft Windows Server 2008 OS support on a CMS
Insight Management
Insight
Management
Installer
Systems Insight
Manager
Insight Control
Matrix OE
VCEM
Microsoft Windows Server 2008 Standard
Edition SP2, x641, 2
✓
✓
✓3
✓
✓
Microsoft Windows Server 2008 R2, Standard
Edition SP14
✓
✓
✓
✓
✓
Microsoft Windows Server 2008 Enterprise
Edition SP2, x645, 2
✓
✓
✓3
✓
✓
Microsoft Windows Server 2008 R2 Enterprise
Edition SP15
✓
✓
✓
✓
✓
Standard editions
Enterprise editions
Small Business Server editions
16
Management servers
Table 12 Microsoft Windows Server 2008 OS support on a CMS (continued)
Insight Management
Insight
Management
Installer
Systems Insight
Manager
Windows Small Business Server 2011
Standard Edition
✓
Essentials Edition
✓
Insight Control
Matrix OE
VCEM
Web Server editions
Microsoft Windows Web Server 2008 SP2,
(x64)
✓
Microsoft Windows Server 2008 R2, Web
Edition SP1
✓
1
Microsoft Windows Server 2008 Standard Edition SP2 supports a maximum of 32 GB memory.
2
Not supported for Gen9 servers.
3
This operating system is supported for Windows Server 2008,Windows Server 2008 R2, Windows Server 2012, and Windows
Server 2012 R2 migrations by installing WAIK 3.0 or ADK 8 and activating the DISM tool as described in the HP Insight Control
Server Migration User Guide.
The Standard Edition of Windows Server 2008 R2 SP1 supports a maximum of 32 GB memory and four CPU sockets.
4
5
HP recommends that you use the Enterprise Edition as the CMS operating system.
Table 13 Microsoft Windows 7 OS support on a CMS
Insight Management
Insight
Management
Installer
Systems Insight
Manager
Insight Control
Microsoft Windows 7 SP1 Enterprise Edition
✓
Microsoft Windows 7 SP1 Professional Edition
✓
Matrix OE
VCEM
Matrix OE
VCEM
Table 14 Microsoft Windows Vista OS support on a CMS
Insight Management
Insight
Management
Installer
Systems Insight
Manager
Insight Control
Microsoft Windows Vista SP2 Business Edition
(x86 only)
✓
Microsoft Windows Vista SP2 Business Edition
(x64 only)
✓
Microsoft Windows Vista SP2 Enterprise (x86
only)
✓
Microsoft Windows Vista SP2 Enterprise Edition
(x64 only)
✓
Software
17
Additional language support for the HP Insight Management products
Besides English, the Insight Management suite of products provides support to other languages.
The following table lists the components within the Insight Management suite that have the user
interface available in the Japanese and Simplified Chinese versions.
Table 15 Additional language support
Insight Management components
Japanese
Simplified Chinese
HP System Management Homepage
✓
✓
HP Version Control Agent
✓
✓
HP Version Control Repository Manager
✓
✓
HP Insight managed system setup wizard
✓
✓
HP Capacity Advisor
✓
✓
HP Insight Management Installer
✓
✓
✓
✓
HP Systems Insight Manager
1
HP Insight Management Advisor
✓
HP Insight Remote Support
✓
HP Insight Control power management
✓
✓
HP Insight Control performance management
✓
✓
HP Insight Control server migration
✓
✓
HP Insight Control virtual machine management
✓
✓
HP Insight Control server provisioning
✓
✓
HP Virtual Connect Enterprise Manager
✓
HP Storage Provisioning Manager
✓
✓
HP Insight mxsync Utility
2
HP Matrix Operating Environment infrastructure orchestration
✓
HP Matrix Operating Environment recovery management
✓
HP Insight Control licensing and reports
✓
SPM adapter for EMC Symmetrix VMAX
✓
HP Matrix Operating Environment capacity planning, configuration and workload
management and HP Insight Capacity Advisor Consolidation software
✓
✓
✓
1
Additionally, HP Systems Insight Manager also supports Traditional Chinese and Korean languages.
2
Matrix infrastructure orchestration designer supports Danish, French, German, Spanish, Simplified Chinese, Italian, and Korean.
CMS supported hypervisors
Table 16 (page 19) lists the hypervisors that are supported for running a CMS in a VM guest. The
CMS must be running one of the supported Microsoft Windows operating systems listed in “CMS
operating systems” (page 15).
For a list of hypervisors and information about using HP Insight Remote Support with HP SIM,
system requirements and product support, see the HP Insight Remote Support documentation at:
http://www.hp.com/go/insightremotesupport/docs
18
Management servers
Table 16 Hypervisors supported for running a CMS in a VM guest
Insight Management
Insight
Management
Installer
Systems
Insight
Manager
Insight
Control
Matrix OE
VCEM1
Microsoft Windows Server 2012 R2 with
Hyper-V
✓
✓
✓
✓2
✓
Microsoft Windows Server 2008 SP2 with
Hyper-V
✓
✓
✓
✓
✓
Microsoft Windows Server 2008 R2 SP1 with
Hyper-V
✓
✓
✓
✓
✓
Microsoft Hyper-V Server 2012
✓
✓
✓
✓2
✓
Microsoft Hyper-V Server 2008 SP2
✓
✓
✓
✓
✓
Microsoft Hyper-V Server 2008 R2 SP1
✓
✓
✓
✓
✓
VMware ESX 4.0 Update 4
✓
✓
✓3
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Hypervisor version
Microsoft
VMware
✓
✓
✓
✓
3
✓
✓
4
✓
✓
✓
✓
✓
✓
✓
✓
✓4
✓5
✓
✓
✓
✓4
✓
✓
VMware vSphere (ESXi) 5.1 Update 1
✓
✓
✓4
✓5
✓
VMware ESXi 5.1 Update2
✓
✓
✓4
✓
✓
VMware vSphere (ESXi) 5.5
✓
✓
✓4
✓5
✓
VMware vSphere (ESXi) 5.5 Update1
✓
✓
✓4
✓
✓
✓
4
✓
✓
✓
✓
1
Virtual Connect Enterprise Manager supports this hypervisor if it hosts a Microsoft Windows 2008 or Windows 2012 64-bit VM.
2
Dynamic Memory supported in Hyper-V 2012 and Hyper-V 2012 R2 only. For more information about Edit virtual server, see the
HP Matrix Operating Environment Infrastructure Orchestration User Guide.
Insight Control power management does not support this hypervisor.
3
4
The Data Center Power Control (DCPC) OS shutdown function is not supported under this hypervisor.
5
For Matrix infrastructure orchestration, full automation is possible with either the stateless Auto Deploy method or the 7.3 Update
2 support of Insight Control server provisioning and Operations Orchestration workflows. Customers can choose to manually install
and configure the hypervisor (or use Insight Control server provisioning and the enhanced server customization capabilities added
in 7.3 Update 1) and register it with vCenter and Insight Control virtual machine management.
Other prerequisite software
Table 17 (page 20) lists the minimum requirements of non-OS software on the CMS.
Software
19
Table 17 Other prerequisite software
Software product
Version
Notes
Microsoft .NET Framework1, 2
2.0 SP1
If .NET 2.0 SP1 is not already installed, the HP Insight Management
Installer installs it.
This is a requirement of the HP Insight Management Installer and of Matrix
infrastructure orchestration.
3.5 SP1
This is required when using the Microsoft SQL Server 2012 Express SP1
database server from the Installation DVD.
This is also a requirement of Matrix infrastructure orchestration and the
HP Matrix Operating Environment.
4.0
This is a requirement of the HP Storage Provisioning Manager.
This is required when using the Microsoft SQL Server 2012 Express SP1
database server from the Installation DVD.
Adobe Flash Player
11
Insight Management requires Adobe Flash Player, which is included with
Systems Insight Manager on the Insight Management 7.4 DVD.
All Flash players are only for x86 browsers. You can run an x86 browser
on an x64 OS.
Microsoft Silverlight
3
5.0.61118.0
HP Storage Provisioning Manager requires the Silverlight application
framework.
Microsoft iSCSI Software Initiator
Insight Control server migration requires iSCSI Software Initiator.
TCP/IP with DNS installed
Installed system names must resolve to an IP address, and IP addresses
must resolve to system names.
Windows Installer
4.5 or later
This is a requirement for the installation or upgrade of the database
packaged in the DVD.
This is a requirement of Microsoft SQL Server 2012 SP1.
1
Microsoft .NET Framework 4.0 can be installed and present on the CMS, but it cannot be set as the default.
2
The Insight Management DVD only includes Microsoft .NET 2.0 SP1. All other versions must be installed separately.
3
Microsoft Silverlight does not support the Firefox browser on a Windows Server 2008 R2 operating system.
CMS supported databases
Insight Management requires a supported database for the CMS. If the CMS does not currently
have a supported database installed on it or does not have access to a remote database, you must
install a database before you install Insight Management.
IMPORTANT: Insight Management requires the Microsoft SQL Server database to be configured
in non-binary collation mode. Binary collation mode is not supported.
For information on how to change the collation mode if it is set to binary mode, see the HP Insight
Management Installation and Configuration Guide at the following website:
If you must install a database, Microsoft SQL 2012 Express SP1 (32-bit) is included on HP Insight
Management 7.4 DVD # 1.
If you wish to upgrade an existing Microsoft SQL Server 2008 R2 Express installation, you may
download and install the SP2 patch located at the following website: http://www.microsoft.com/
en-us/download/details.aspx?id=30437
NOTE: Microsoft SQL Server is available in both 32-bit and 64-bit versions. Insight Management
only carries the 32-bit version of SQL 2012 Express SP1. Thus, it only installs a 32-bit SQL Server
Express version as a fresh install. You must manually upgrade all installed SQL Server editions and
versions, including 64-bit versions, to an edition and version listed in Table 18 (page 21).
20
Management servers
Table 18 Supported databases
Supported
as a local
database
Supported as
a remote
database
Microsoft SQL server 2008 SP42
✓
✓
Microsoft SQL Server 2012 Standard SP1
✓
✓
Microsoft SQL Server 2012 Express SP1 32-bit (Bundled Database with DVD)
✓
Microsoft SQL Server 2012 Enterprise SP1
✓
✓
Microsoft SQL Server 2012 Business Intelligence SP1
✓
✓
Microsoft SQL Server 2012 Web SP1
✓
✓
✓3
✓
Database name and version1
Microsoft SQL Server (unless otherwise noted, both 32-bit and 64-bit versions are supported)
Oracle
Oracle 11g Enterprise Edition Release 2
HP PolyServe Software
✓3
HP PolyServe Software for Microsoft SQL Server
1
2
3
A clustered CMS requires a clustered instance of SQL Server 2012 Enterprise SP1 or SQL Server 2012 Standard SP1 edition. The
instance may run in the CMS cluster or in another cluster that is a member of the same domain as the CMS cluster.
Installation using Microsoft SQL 2008 SP4 returns an unsupported database warning, which must be ignored for the installation
to complete successfully.
Only Systems Insight Manager supports this database.
Supported CMS configurations in a Microsoft Windows domain
HP recommends that you adhere to the following guidelines for your single-server CMS configuration:
•
Do not install Insight Management on domain controllers.
•
If one server is in a workgroup, make sure that each server has a local account with the same
name and password (both for services and database credentials).
•
Do not install Insight Control server deployment and the HP ProLiant Server OS Deployment
Toolkit for Microsoft System Center Configuration Manager (HP OneView for Microsoft System
Center (formerly HP Insight Control for Microsoft System Center)) in the same subnet. Both of
these provide their own separate PXE boot services, and networking issues can arise if both
are installed on the same subnet at the same time.
•
Do not install Insight Control server deployment and an HP Ignite-UX server on the same subnet.
•
Matrix OE uses Microsoft Windows Single Sign-On (SSO) authentication for the Matrix OE
services/processes database connectivity. HP recommends that you use the same Microsoft
Windows domain account credentials for both the Systems Insight Manager installation, the
Matrix OE installation, and the database access.
A CMS configuration can contain two separate databases, which can be local or remote:
•
A CMS database for the CMS to store information about all managed devices
The databases can be local to the CMS or can be located on a remote system. The CMS and the
SQL Server database servers can either be in the same domain or in a trusted domain.
NOTE: This release of Insight Management also supports the configuration of the CMS as a
two-node failover cluster. For more information about a CMS configuration in a high-availability
environment, see “Management servers in a high-availability environment” (page 24).
Software
21
KVM virtual machine provisioning
For ProLiant customers wanting to manage a KVM cloud, Matrix 7.4 can create and manage KVM
virtual machines in HP CloudSystem 8 resource pools in the same manner as for other external
cloud providers. For more information about HP CloudSystem 8 see the documentation at: http://
www.hp.com/go/CloudSystem/docs
Insight Control server provisioning software
Insight Control server provisioning runs on the following hypervisors:
•
VMware ESXi version 5.0, 5.0 Update 1, 5.0 Update 2, and 5.0 Update 3
•
VMware vSphere (ESXi) version 5.1, 5.1 Update 1, 5.1 Update 2, 5.5, 5.5 Update 1, and
5.5 Update 2
•
Microsoft Windows Server 2012 with Hyper-V
•
Microsoft Windows Server 2012 R2 with Hyper-V
NOTE: There are special considerations for using Insight Control server provisioning in a Matrix
Operating Environment which has been using Insight Control server deployment. See the Data
Migration from Insight Control server deployment to Insight Control server provisioning whitepaper
at HP Enterprise Information Library.
NOTE: To join a server to an Active Directory domain with Matrix environments using either
Insight Control server provisioning or Server Automation deployment, it is required to use the
enhanced server customization feature rather than the default post-install customization. Joining a
domain during deployment causes the Matrix OE post-install customization step to fail with an
error stating:
Error customizing Logical Server <Logical server name> realized by
<target UUID>.
Additional management server requirements
This section defines other management server requirements for all management servers (CMS and
Insight Control server provisioning).
Supported browsers
Table 19: Supported browsers (page 22) lists the browser versions that are required for browsing
into Insight Management on any management server.
Table 19 Supported browsers
Insight Management
Systems
Insight
Manager
Insight
Control
Matrix OE1
Microsoft Internet Explorer 8.0
✓
✓3, 4
✓
Browser
VCEM2
Insight
Remote
Support
Adobe
Flash
Player
✓
✓
✓
✓
✓
✓
✓
✓
✓5
✓
✓
✓6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Microsoft
Mozilla
Mozilla Firefox 24 ESR
Google Chrome
22
Management servers
✓
Table 19 Supported browsers (continued)
Mozilla
Google Chrome version 3x.x with IE Tab Multi Enhance
Extension7, 8
✓
✓
✓
Google Chrome version 3x.x
✓
1
HP Storage Provisioning Manager requires that the browser runs on a Windows platform.
2
For Virtual Connect firmware browser support, , see the HP Virtual Connect Enterprise Manager User Guide at the following website:
For Insight Control power management to operate properly, you must install the SSL certificate. If you do not install the certificate,
and you see a pop-up window with a warning, expand the window and select Continue to this website (not recommended).
HP Insight Control server provisioning does not support IE 8.
3
4
5
Flash is supported in 32-bit mode only.
6
To access the Matrix Operating Environment using Windows Server 2012, turn on the Desktop Experience feature in Windows
Programs and Features.
Pop up should not be blocked in Chrome-IEtab extension.
7
8
Chrome IE tab extension supports only IE 6, 7, 8 and 9.
Recommended screen resolution
The minimum supported resolution for all management servers is 800 x 600 pixels. For the Insight
Control server provisioning appliance, the minimum supported screen resolution is 1024 x 768.
For optimum performance, the screen size should be at least 1280 × 1024 pixels for desktop
monitors, or 1280 × 800 for laptop displays.
Software
23
3 Management servers in a high-availability environment
This chapter defines the requirements for a CMS in a high-availability environment.
CMS in a HA environment
Using failover clustering with Insight Management is a simple way to achieve redundancy,
availability, load balancing, and failover capability.
The CMS can be configured as a single-site, two-node physical server Microsoft Windows Server
2012 failover cluster to create a highly-available environment.
CMS clustering is an included feature of the Microsoft Windows Server 2012 or 2012 R2 Standard
operating systems, and cluster support is an included feature of the Microsoft SQL Server 2012
Enterprise SP1and Standard SP1. For more information, see the Features Supported by the Editions
of SQL Server 2012 at http://msdn.microsoft.com/en-us/library/cc645993.aspx#High_availability.
Installing or upgrading a CMS cluster follows a different procedure from that of a single-server
CMS installation or upgrade. For more information, see the Installing and upgrading HP Insight
Management 7.4 on Windows Server 2012 Failover Clusters white paper in the HP Enterprise
Information Library: HP Enterprise Information Library
CMS supported cluster environments
Insight Management supports the following Microsoft Windows Server platforms for CMS
high-availability:
•
•
Operating system:
◦
Microsoft Windows Server 2008 R2 Enterprise Edition SP1
◦
Microsoft Windows Server 2012 Standard Edition
◦
Microsoft Windows Server 2012 R2 Standard Edition
Databases:
◦
Microsoft SQL Server 2012 Standard SP1 or Enterprise SP1
◦
Microsoft SQL 2012 BI SP1
Insight Management components supported in a CMS highly available environment
Table 20 Insight Management components that the cluster platform supports
Insight Management component
Supported?
HP Systems Insight Manager
✓
HP Version Control Repository Manager
✓
HP System Management Homepage
✓
HP Insight Management Advisor
✓
Windows Management Instrumentation (WMI) Mapper
✓
HP Insight Control licensing and reports
✓
HP Insight Control performance management
✓
HP Insight Control power management
✓
HP Insight Control server migration
✓
24
Management servers in a high-availability environment
Table 20 Insight Management components that the cluster platform supports (continued)
Insight Management component
Supported?
HP Insight Control virtual machine management
✓
HP Insight managed system setup wizard
✓
HP Insight mxsync utility
✓
HP Matrix Operating Environment capacity planning, configuration and workload management, and
HP Capacity Advisor Consolidation software
✓
HP Matrix infrastructure orchestration
✓
HP Matrix recovery management
✓
HP Storage Provisioning Manager
✓
HP SPM Adapter for EMC Symmetrix VMAX
✓
HP Virtual Connect Enterprise Manager
✓
CMS cluster configuration
•
Two-node clusters, consisting of two HP ProLiant servers (that is, physical servers, not virtual
machines) and attached shared storage, are supported. Each server must satisfy the hardware
and recommended requirements for Insight Management and the Microsoft Windows Server
2012 Standard, 2012 R2 Standard, or 2008 R2 Enterprise OS, including processor, memory,
networking, and disk space.
To validate servers and storage that are certified for Microsoft Windows Server 2012 or 2008
R2 SP1, see “Management servers” (page 9) and the following Microsoft website:
http://www.windowsservercatalog.com/
•
HP recommends SAN shared storage, although you can use any shared storage that Microsoft
clustering supports.
•
HP recommends SAN boot for the two cluster nodes.
•
Each server requires two dedicated network adapters, at minimum, one for a public
(client-facing) network and another for a private cluster network. Each server requires a third
dedicated adapter if you use an iSCSI SAN.
•
The SQL server must run either in the same cluster with Insight Management, or, in a remote
Windows cluster that is a member of the same Windows domain as the Insight Management
cluster.
•
An Active Directory domain infrastructure and DNS services suitable for hosting the cluster
are required, but they cannot run on either of the two cluster nodes.
•
The fully configured cluster must pass the Validate test in the Windows Failover Cluster
Manager.
CMS in a HA environment
25
Unsupported items in a CMS cluster configuration
26
•
Brocade Network Advisor, HP P6000 Command View Software, HP Operations Orchestration,
VMware vCenter Server module, and similar applications are not permitted in a CMS cluster
•
Multi-site Windows cluster: a CMS cluster is a single-site cluster.
Management servers in a high-availability environment
4 Managed systems hardware
This chapter provides the hardware, firmware, and software requirements for servers that Insight
Management can license and manage, as well as information on public cloud providers.
Public cloud providers
In addition to provisioning with on-premise resources, HP Matrix Infrastructure Orchestration supports
provisioning virtual servers to the following public cloud providers: HP Cloud Services, Savvis, and
Amazon Web Services.
Supported HP BladeSystem enclosures
Table 21 Supported HP BladeSystem enclosures
Systems
Insight
Manager
Insight
Control
Matrix OE
VCEM
HP BladeSystem c3000 Enclosure
✓
✓
✓
✓
HP BladeSystem c3000 Tower Enclosure1
✓
✓
✓
✓
HP BladeSystem c7000 Enclosure1
✓
✓
✓
✓
HP BladeSystem c7000 Platinum Enclosure1
✓
✓2
✓
✓
Enclosure model
1
1
2
HP recommends Onboard Administrator (OA) firmware version 4.30 for ProLiant, Integrity, or a mix of ProLiant and Integrity server
blades.
This enclosure is supported by Insight Control power management and Insight Control server migration only.
In addition, the HP D2220sb storage blade is a disk enclosure and adds a hard disk drive as local
drives to a single blade server.
Supported servers
This section lists the HP and third-party servers that Insight Management can manage. The supported
servers for Insight Control server provisioning are listed below.
Older servers that are not listed in this support matrix might still work with Insight Management.
However, HP has stopped testing Insight Management on older servers and does not claim them
to be officially supported.
HP ProLiant servers
Insight Control server provisioning supported servers
Insight Control server provisioning (IC srvr prov) supports ProLiant G6, G7, Gen8, and Gen9
servers that have an iLO processor as shown in the following tables. The minimum required memory
for any target server is 2GB.
Public cloud providers
27
NOTE:
•
For the latest HP ProLiant server Windows Hyper-V support matrix, see the following website:
http://h18004.www1.hp.com/products/servers/windows/index.html
•
For the latest HP ProLiant server VMware support matrix, see the following website: http://
h18004.www1.hp.com/products/servers/vmware/supportmatrix/hpvmware.html
•
For ProLiant customers wanting to manage a KVM cloud, Matrix 7.4 can create and manage
KVM virtual machines in HP CloudSystem 8 resource pools in the same manner as for other
external cloud providers. For more information about HP CloudSystem 8 see the documentation
at: http://www.hp.com/go/CloudSystem/docs
IMPORTANT: Not all operating systems are supported on all ProLiant servers. For a list of operating
systems supported by HP ProLiant servers, see the following certification and support website:
http://h18004.www1.hp.com/products/servers/windows/index.html
Table 22 HP ProLiant BL BladeSystem servers
Insight Control
migr
perf
pwr2, 3
✓
✓
✓
✓
ProLiant BL2x220c G64
✓
✓
✓
✓
✓
✓
✓
✓
ProLiant BL260c G5
✓
✓
✓
✓
ProLiant BL280c G6
✓
✓
✓
✓
ProLiant BL420c Gen8
✓
✓
✓
✓
ProLiant BL460c
✓
✓
ProLiant BL460c G5
✓
✓
ProLiant BL460c G6
✓
✓
✓
✓
ProLiant BL460c G7
✓
✓
✓
✓
✓
✓
✓
ProLiant BL465c
✓
ProLiant BL465c G5
✓
✓
ProLiant BL465c G6
✓
ProLiant BL465c G7 (AMD Opteron 6100)
Server model
SIM
ProLiant BL10e
✓
1
virt
Matrix OE
VCEM
✓
✓
✓
✓
✓
✓
✓
✓5
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
ProLiant BL465c Gen8 (AMD Opteron
6300)
✓
✓
✓
✓
✓
✓
✓
✓
ProLiant BL480c
✓
✓
✓
✓
✓
✓
ProLiant BL490c G6
✓
✓
✓
✓
✓
✓
✓
✓
ProLiant BL490c G7
✓
✓
✓
✓
✓
✓
✓
✓
28
Managed systems hardware
srvr prov
Table 22 HP ProLiant BL BladeSystem servers (continued)
Insight Control
SIM
migr
perf
pwr2, 3
ProLiant BL495c G5
✓
✓
✓
✓
ProLiant BL495c G6
✓
✓
✓
✓
ProLiant BL620c G7
✓
✓
✓
✓
✓
✓
ProLiant BL680c G5
✓
✓
ProLiant BL680c G7
✓
✓
ProLiant BL685c
✓
ProLiant BL685c G5
✓
✓
ProLiant BL685c G6
✓
Server model
1
srvr prov
virt
Matrix OE
VCEM
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1
Insight Control performance management (IC perf) does not support IDE and SAS HBA storage controllers for any of these servers.
2
For information on supported power capabilities, see Table 57 (page 73).
3
To use Insight Control power management, you must apply an iLO license to the server.
4
This workstation blade contains two complete physical servers, and therefore requires two software licenses for each blade.
5
BL2x220c G7 servers cannot be added to the Insight Control server provisioning appliance using PXE unless the server is running
iLO 3, version 1.61 or later.
Table 23 HP ProLiant workstation blades
Workstation model
SIM
migr
perf
pwr1, 2
srvr prov
virt
Matrix OE
VCEM
ProLiant xw460c
✓
✓
✓
✓
ProLiant xw2x220c3
✓
✓
✓
✓
ProLiant WS460c G6
✓
✓
✓
ProLiant WS460c Gen8
✓
✓
✓
✓
✓4
✓
✓5
✓
✓
1
2
3
This workstation blade contains two complete physical servers, and therefore requires two software licenses for each blade.
4
Windows 7 SP1 64 bit only supported in Legacy mode.
5
Supported by Matrix infrastructure orchestration, Matrix OE logical server management, and Capacity Advisor with limitations.
See the How to license HP ProLiant WS460c Gen8 Blade Workstation for Capacity Advisor whitepaper at HP Enterprise Information
Library for more information.
Table 24 HP ProLiant DL rack mount servers
Insight Control
Server model
srvr
prov
virt
Matrix OE
✓
✓
✓
✓
✓
✓
✓
✓
SIM
migr
perf
ProLiant DL60 Gen9
✓
✓
ProLiant DL80 Gen9
✓
✓
pwr1, 2
VCEM3
Supported servers
29
Table 24 HP ProLiant DL rack mount servers (continued)
Insight Control
Server model
SIM
migr
perf
pwr1, 2
srvr
prov
virt
ProLiant DL120 G5
✓
✓
ProLiant DL120 G6
✓
✓
ProLiant DL120 G7
✓
✓
✓
ProLiant DL120 Gen9
✓
✓
✓
ProLiant DL140 G2
✓
✓
ProLiant DL140 G3
✓
✓
ProLiant DL145 G2
✓
✓
ProLiant DL145 G3
✓
✓
ProLiant DL160 G5
✓
✓
ProLiant DL160 G5p
✓
✓
ProLiant DL160 G6
✓
Matrix OE
✓
✓
✓
✓
✓
4
ProLiant DL160 Gen8
✓
✓
✓
✓
✓
ProLiant DL160 Gen9
✓
✓
✓
✓
✓
ProLiant DL165 G5
✓
✓
ProLiant DL165 G5p
✓
✓
ProLiant DL165 G6
✓
✓
ProLiant DL165 G7 (AMD Opteron 6100)
✓
✓
✓
✓
ProLiant DL170e G6
✓
✓
ProLiant DL170h G6
✓
✓
ProLiant DL180 G5
✓
✓
ProLiant DL180 G6
✓
✓
ProLiant DL180 Gen9
✓
ProLiant DL185 G5
✓
ProLiant DL320 G3
✓
✓
✓
✓
ProLiant DL320 G4
✓
✓
✓
✓
ProLiant DL320 G5
✓
✓
✓
✓
✓
ProLiant DL320 G5p
✓
✓
✓
✓
✓
ProLiant DL320 G6
✓
✓
✓
✓
✓
✓
ProLiant DL320e Gen8
✓
✓
✓
✓
✓
✓
ProLiant DL320e Gen8 v2
✓
✓
✓
✓
✓
✓5
ProLiant DL320s
✓
✓
✓
✓
ProLiant DL360 G2
✓
✓
✓
✓
ProLiant DL360 G3
✓
✓
✓
✓
30
✓
✓
✓
✓
✓
✓
✓
✓
VCEM3
Insight Control
Server model
SIM
migr
perf
pwr1, 2
srvr
prov
virt
Matrix OE
ProLiant DL360 G4
✓
✓
✓
✓
ProLiant DL360 G4p
✓
✓
✓
✓
ProLiant DL360 G5
✓
✓
✓
✓
✓
✓
ProLiant DL360 G6
✓
✓
✓
✓
✓
✓
✓
ProLiant DL360 G7
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓5
ProLiant DL360p Gen8
✓
✓
✓
✓
✓
✓
✓
ProLiant DL360p Gen8 SE
✓
✓
✓
✓
✓
✓
✓5
ProLiant DL360 Gen9
✓
✓
✓
✓
✓
✓
✓
ProLiant DL365
✓
✓
✓
✓
ProLiant DL365 G5
✓
✓
✓
✓
✓
✓
ProLiant DL370 G6
✓
✓
✓
✓
✓
✓
ProLiant DL380 G3
✓
✓
✓
✓
ProLiant DL380 G4
✓
✓
✓
✓
ProLiant DL380 G5
✓
✓
✓
✓
✓
✓
ProLiant DL380 G6
✓
✓
✓
✓
✓
✓
✓
ProLiant DL380 G7
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓5
✓
✓
✓
✓
✓
✓
✓
ProLiant DL380 Gen9
✓
✓
✓
✓
✓
✓
✓
ProLiant DL380z
✓
✓
✓
✓
✓
✓
ProLiant DL385
✓
✓
✓
ProLiant DL385 G2
✓
✓
✓
✓
ProLiant DL385 G5
✓
✓
✓
✓
✓
ProLiant DL385 G5p
✓
✓
✓
✓
✓
ProLiant DL385 G6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
ProLiant DL385p Gen8 (AMD Opteron
6300)
✓
✓
✓
✓
✓
✓
✓
ProLiant DL560 Gen8
✓
✓
✓
✓
✓
✓
✓
ProLiant DL580
✓
✓
✓
✓
ProLiant DL580 G2
✓
✓
✓
✓
ProLiant DL580 G3
✓
✓
✓
✓
✓
✓
VCEM3
Supported servers
31
Insight Control
Server model
SIM
migr
perf
pwr1, 2
srvr
prov
virt
Matrix OE
✓
✓
✓
✓
✓
ProLiant DL580 G4
✓
ProLiant DL580 G5
✓
✓
✓
ProLiant DL580 G7
✓
✓
✓
✓
✓
✓
✓
ProLiant DL580 Gen8
✓
✓
✓
✓
✓
✓
✓
ProLiant DL585
✓
✓
✓
ProLiant DL585 G2
✓
✓
✓
ProLiant DL585 G5
✓
✓
✓
✓
✓
ProLiant DL585 G6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
ProLiant DL740
✓
✓
✓
ProLiant DL740 G2
✓
✓
✓
ProLiant DL760
✓
✓
✓
✓
ProLiant DL760 G2
✓
✓
✓
✓
ProLiant DL785
✓
✓
✓
✓
ProLiant DL785 G5
✓
✓
✓
✓
ProLiant DL785 G6
✓
✓
✓
✓
✓
ProLiant DL980 G7
✓
✓
✓
✓
✓
VCEM3
6
✓
✓
✓
1
2
3
VCEM support does not apply to these servers.
4
Insight Control performance management does not support IDE controllers on this server.
5
Supported only by Matrix infrastructure orchestration, Matrix OE logical server management, and Capacity Advisor.
6
Windows deployments using Intelligent Provisioning v1.61 are not supported.
Table 25 HP ProLiant ML tower servers
Insight Control
Server model
SIM
migr
perf
ProLiant ML104, 5
✓
✓
✓
ProLiant ML110 G7
✓
✓
✓
ProLiant ML150 Gen9
✓
✓
✓
ProLiant ML310 G2
✓
ProLiant ML310 G3
✓
ProLiant ML310 G4
✓
32
✓
✓
pwr1, 2
srvr
prov
virt
✓6
✓
✓
✓
✓
Matrix OE
✓
✓
✓
✓
✓
✓
✓
✓
VCEM3
Table 25 HP ProLiant ML tower servers (continued)
Insight Control
Server model
SIM
migr
ProLiant ML310 G5
✓
ProLiant ML310 G5p
perf
pwr1, 2
srvr
prov
virt
Matrix OE
✓
✓
✓
✓
✓
✓
✓
ProLiant ML310e Gen8
✓
✓
✓
✓
✓
✓
ProLiant ML310e Gen8 v2
✓
✓
✓
✓
✓
✓6
ProLiant ML330 G3
✓
✓
✓
ProLiant ML330 G6
✓
✓
✓
ProLiant ML350 G2, G3
✓
✓
✓
✓
ProLiant ML350 G3
✓
✓
✓
✓
ProLiant ML350 G4
✓
✓
✓
ProLiant ML350 G4p
✓
✓
✓
ProLiant ML350 G5
✓
✓
✓
✓
✓
✓
ProLiant ML350 G6
✓
✓
✓
✓
✓
✓
✓
ProLiant ML350e Gen8
✓
✓
✓
✓
✓
✓
✓
ProLiant ML350e Gen8 v2
✓
✓
✓
✓
✓
✓
✓6
ProLiant ML350p Gen8
✓
✓
✓
✓
✓
✓
✓
ProLiant ML350 Gen9
✓
✓
✓
✓
✓
✓
✓
ProLiant ML370 G2
✓
✓
✓
✓
ProLiant ML370 G3
✓
✓
✓
✓
ProLiant ML370 G4
✓
✓
✓
✓
ProLiant ML370 G5
✓
✓
✓
✓
✓
✓
ProLiant ML370 G6
✓
✓
✓
✓
✓
✓
ProLiant ML530
✓
✓
✓
✓
ProLiant ML570 G3
✓
✓
✓
✓
ProLiant ML570 G4
✓
✓
✓
ProLiant MicroServer Gen8 (for managed
nodes only)
✓
✓
✓7
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1
2
3
4
Supported for managed nodes only.
5
Not supported with Windows 2008 R2 SP1 or Windows 2012 with an embedded controller set to SATA AHCI mode.
6
7
Supported only by Matrix infrastructure orchestration and Matrix OE logical server management.
VCEM3
Supported servers
33
Table 26 HP ProLiant SL scalable system servers
Insight Control
Server model
SIM
migr
pwr1, 2, 3
perf
srvr
prov
virt
Matrix OE
ProLiant SL160s G6
✓
✓
ProLiant SL160z G6
✓
✓
ProLiant SL165s G7
✓
✓
ProLiant SL165z G6
✓
✓
ProLiant SL165z G7
✓
✓
ProLiant SL170s G6
✓
✓
ProLiant SL170z G6
✓
✓
ProLiant SL230s Gen8
✓
✓
✓5
✓
✓
✓
✓
✓
✓
✓5
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
ProLiant SL335s G7
✓
✓
✓
✓
✓
ProLiant SL390s G7
✓
✓
✓
✓
✓
✓
ProLiant SL2500 Gen8
✓
✓
✓
✓6
✓
✓
✓
ProLiant SL4540 Gen8 HyperStorage System
✓
✓
✓
✓6
✓
✓
✓7
ProLiant SL4540 Gen8
✓
✓
✓
✓
✓
✓
✓
ProLiant SL4545 G7 HyperStorage System
✓
✓
✓
✓
✓
✓
✓
ProLiant XL220a Gen8 v2
✓
✓
✓
✓
✓
✓
ProLiant XL230a Gen9
✓
✓
✓
✓
✓
✓
✓
1
2
3
Associating chassis nodes on SL series servers is not supported.
4
5
Insight Control performance management does not support IDE or SAS HBA controllers on this server.
6
Supports power metering only.
7
Supported only by Capacity Advisor
VCEM4
HP Integrity servers
Table 27 HP Integrity servers
Insight Control
Server model
SIM
migr
perf
pwr1, 2
srvr
prov
virt
Matrix
OE3, 4
Integrity rx2660
✓
✓
✓
Integrity rx3600
✓
✓
✓
Integrity rx6600
✓
✓
✓
Integrity rx7620
✓
✓
Integrity rx7640
✓
✓
34
VCEM5
Table 27 HP Integrity servers (continued)
Insight Control
Server model
SIM
migr
perf
pwr1, 2
srvr
prov
virt
Matrix
OE3, 4
Integrity rx8620
✓
Integrity rx2800 i2
✓
✓
✓
Integrity rx2800 i4
✓
✓
✓
Integrity rx2900 i4
✓
✓
✓
Integrity rx8640
✓
Integrity Superdome
✓
✓
✓
Integrity Superdome 26
✓
✓
✓
VCEM5
✓
✓
1
2
3
Matrix recovery management does not support Integrity servers.
4
For physical systems, all HP Integrity BladeSystem servers with Virtual Connect, all supported Ethernet adapters, and all supported
Fibre Channel and FCoE host bus adapters can be used with Integrity/HP-UX cross-technology logical server operations. For VM
hosts, only HP Integrity BladeSystem servers and rack-mounted HP Integrity servers (including Superdome 2), all supported Ethernet
adapters, and QLogic 4 Gb and 8 Gb Fibre Channel host bus adapters can be used with Integrity/HP-UX cross-technology logical
server operations.
5
6
Supported as a virtual machine host/destination for a P2V or V2V migration.
Table 28 HP Integrity NonStop servers
Server model
SIM
migr
perf
pwr1
Integrity NonStop NB50000c
✓
✓
Integrity NonStop NB50000c-cg
✓
✓
Integrity NonStop NB54000c
✓
✓
Integrity NonStop NB54000c-cg
✓
✓
Integrity NonStop NS16x00
✓
✓
Integrity NonStop NS16000cg
✓
✓
✓
✓
Integrity NonStop NS5000cg
✓
✓
Integrity NonStop NS5000T
✓
✓
Integrity NonStop NS3000AC
✓
✓
Integrity NonStop NS2000
✓
✓
Integrity NonStop NS2000T
✓
✓
Integrity NonStop NS2000ST
✓
✓
✓
✓
Integrity NonStop S-Series servers
✓
1
2
srvr
prov
virt
Matrix OE
VCEM2
Supported servers
35
Table 29 HP Integrity BladeSystem servers
Server model
SIM
migr
perf
pwr1
srvr
prov
virt
Matrix
OE2, 3
VCEM
Integrity BL860c
✓
✓
✓
✓
✓4
Integrity BL860c i2
✓
✓5
✓
✓
✓
Integrity BL860c i4
✓
✓5
✓
✓
✓
Integrity BL870c
✓
✓
✓
✓
✓✓4
Integrity BL870c i2
✓
✓5
✓
✓
✓
Integrity BL870c i4
✓
✓5
✓
✓
✓
✓
5
✓
✓
✓
5
✓
✓
✓
Integrity BL890c i2
Integrity BL890c i4
✓
✓
✓
1
2
Matrix recovery management does not support Integrity servers.
3
For physical systems, all HP Integrity BladeSystem servers with Virtual Connect, all supported Ethernet adapters, and all supported
Fibre Channel and FCoE host bus adapters can be used with Integrity/HP-UX cross-technology logical server operations. However,
for VM hosts, only HP Integrity BladeSystem servers and rack-mounted HP Integrity servers, all supported Ethernet adapters, and
QLogic 4 Gb and 8 Gb Fibre Channel host bus adapters are supported.
VC version 4.30 and 4.31 are not supported with the servers BL860c and BL870c. Hence they must not be a part of an enclosure
with VC 4.30 or later
The DCPC Power ON/OFF actions are not supported for this server.
4
5
Other HP servers
Table 30 Other HP servers
Server model
SIM
✓
HP 9000
1
2
migr
perf
pwr
srvr
prov
virt
Matrix OE1
VCEM2
✓
Matrix infrastructure orchestration, Matrix OE visualization logical server management, and Matrix recovery management do not
support HP 9000 servers.
Third-party servers
HP Matrix Operating Environment virtual logical servers are supported on third-party servers running
a supported hypervisor when an HP Matrix Operating Environment for non-HP servers license is
applied. Third-party severs are licensed for Matrix Operating Environment and Insight Control
virtual machine management through the HP Matrix Operating Environment for non-HP Servers
license. For licensing information, see quickspecs at http://h18004.www1.hp.com/products/
quickspecs/13050_div/13050_div.pdf
In general, any server listed in the VMware or Microsoft Hyper-V hypervisor compatibility guides
is supported as follows. However, if HP Systems Insight Manager cannot obtain the server's serial
number, HP SIM cannot support the server. Note that VM guests cannot be moved from one
third-party vendor’s server to another.
HP tested select models from the following server families. They represent a sample of the third
party servers that can be supported.
•
36
Dell PowerEdge
•
IBM System x servers
•
Cisco UCS
For information on Microsoft Hyper-V compatibility, search for Hyper-V from the http://
www.windowsservercatalog.com website.
For information on VMware compatibility, use the search function at http://www.vmware.com/
resources/compatibility/search.php.
NOTE: HP Insight Control migration, performance, power management, and server provisioning
are not supported on these servers because you cannot apply an HP Insight Control license to a
third-party server. VMs using raw devices, Matrix recovery management, and physical server
provisioning are also not supported on third-party servers. To understand the functionality that HP
SIM supports, see the white paper titled How to manage non-HP x86 Windows servers with HP
SIM at the following website:
Supported storage products
Table 31 Supported storage hardware
Matrix OE
Recovery
Mgmt3
SPM4
✓
✓
✓5, 6
✓
✓
✓
✓5, 6
✓
✓
✓
✓
✓5, 6
✓
✓
✓
✓7
✓
StoreServ 7000 Fibre Channel (3PAR OS 3.1.2 MU2,
3.1.2 MU3, 3.1.2 MU5, 3.1.3 MU1, 3.2.1, and
3.2.1 MU1)
✓
✓
✓
✓
✓
StoreServ 7000 iSCSI (3PAR OS 3.1.2 MU2, 3.1.2
MU3, 3.1.2 MU5, 3.1.3 MU1, 3.2.1, and 3.2.1
MU1)
✓
✓
✓
✓7
✓
EVA 4x008
✓
✓
✓
✓9
✓
✓
EVA 6x008
✓
✓
✓
✓9
✓
✓
✓
9
✓
✓
9
Storage device/series
Service
srvr prov1 provisioning2
SIM
migr
F-Class Fibre Channel (3PAR OS 3.1.1 MU1, 3.1.1
MU2, 3.1.1 MU3, 3.1.2, 3.1.2 MU1, 3.1.2 MU2,
3.1.2 MU3, 3.1.2 MU5, 3.1.3 MU1)
✓
✓
✓
T-Class Fibre Channel (3PAR OS 3.1.1 MU1, 3.1.1
MU2, 3.1.1 MU3, 3.1.2, 3.1.2 MU1, 3.1.2 MU2,
3.1.2 MU3, 3.1.2 MU5, 3.1.3 MU1)
✓
✓
StoreServ 10000 Fibre Channel (3PAR OS 3.1.1
MU1, 3.1.1 MU2, 3.1.1 MU3, 3.1.2, 3.1.2 MU1,
3.1.2 MU2, or 3.1.2 MU3, 3.1.2 MU5, 3.1.3 MU1,
3.2.1, and 3.2.1 MU1)
✓
StoreServ 10000 iSCSI (10GB) (3PAR OS 3.1.1
MU1, 3.1.1 MU2, 3.1.1 MU3, 3.1.2, 3.1.2 MU1,
3.1.2 MU2, or 3.1.2 MU3, 3.1.2 MU5, 3.1.3 MU1,
3.2.1, and 3.2.1 MU1)
HP 3PAR StoreServ
✓5, 6
HP P6000 EVA
8
✓
EVA 8x00
✓
✓
P6300 Fibre Channel
8
✓
✓
✓
✓
✓
✓
P6500 Fibre Channel
8
✓
✓
✓
✓9
✓
✓
37
Table 31 Supported storage hardware (continued)
Matrix OE
SIM
migr
Service
Recovery
Mgmt3
SPM4
P6350 Fibre Channel (HP P6000 Command View
Software , 10.2, 10.3, 10.3.1, 10.3.2, 10.3.3, and
10.3.4)
✓
✓
✓9
✓
✓
P6550 Fibre Channel (HP P6000 Command View
Software , 10.2, 10.3, 10.3.1, 10.3.2, 10.3.3, and
10.3.4)
✓
✓
✓9
✓
✓
XP10000
✓
N/A
✓
✓
XP12000
✓
N/A
✓
✓
✓10
XP20000
✓
N/A
✓
✓
✓10
XP24000
✓
N/A
✓
✓
✓10
P9500 (P9500 firmware versions 70-03-04-00/00,
70-04-52-00/00, 70-05-10-00/00, and
70-06-01-00/00)
✓
✓
N/A
✓
✓
✓10
P2000 G3 Fibre Channel (with TS240P003 and T250
firmware)
✓
✓
✓
✓7, 9
P2000 G3 SAS (with TS240P003 and T250
firmware)
✓
✓
✓
7
P2000 G3 Fibre Channel/iSCSI (with TS240P003
and T250 firmware)
✓
✓
✓
✓7, 9
P2000 G3 iSCSI, 10GB (with TS240P003 and T250
firmware)
✓
✓
✓
P2000 G3 iSCSI, 1GB (with TS240P003 and T250
firmware)
✓
✓
✓
MSA P2000 G3 with TS251 firmware
✓
✓
✓9
✓9
MSA 1040 with GL105 Fibre Channel
✓
✓
✓9
✓9
MSA 1040 iSCI (with GL200 firmware)
✓
✓
✓
✓
MSA 1040 Fibre Channel (with GL200 firmware)
✓
✓
✓
✓
MSA 2040 Fibre Channel (with GL100R003–02 and
GL105 firmware)
✓
✓
✓9
✓9
MSA 2040 SAS (with GL101R001 and GL200
firmware)
✓
✓
✓
MSA 2040 iSCSI (with GL101R001 and GL200
firmware)
✓
✓
✓
MSA 2040 Fibre Channel (with GL200 firmware)
✓
✓
✓
HP P9000 XP
HP MSA
HP StoreAll Storage
StoreAll 9300
✓
StoreAll 9320
✓
X9720
✓
38
✓
Matrix OE
StoreAll 9730
SIM
migr
Service
Recovery
Mgmt3
SPM4
✓
HP StoreVirtual
✓
✓7
✓7
StoreVirtual VSA with LeftHand OS 10.5
✓
StoreVirtual VSA 2014 with LeftHand OS 11.0
✓
4330 Fibre Channel with LeftHand OS 10.5 and
11.0
✓
4730 Fibre Channel with LeftHand OS 10.5 and
11.0
✓
4300 G2 iSCSI with LeftHand OS 9.5, 10.5 and
11.0
✓
✓
✓7
11.0
✓
✓
✓7
11.0
✓
✓
✓7
11.0
✓
✓
4130 iSCSI with LeftHand OS 10.5 and 11.0
✓
✓
✓
✓
✓
✓
✓
✓
4335 Hybrid with LeftHand OS 11.0
✓
LeftHand OS 11.5
✓
HP StoreEasy
1400 G2
✓
1430
✓
1440
✓
1500 G2
✓
1530
✓
1540
✓
1600 G2
✓
1630
✓
1640
✓
1800 G2
✓
1800sb G2
✓
1830
✓
1840
✓
39
Matrix OE
SIM
3400 G2
✓
3800 G2
✓
3800sb G2
✓
3830
✓
3840 Gateway Storage
✓
3840 Gateway Storage Blade
✓
HP 3PAR StoreServ File Controller v2 Storage
✓
P4000 G2 Unified NAS Gateway
✓
5520
✓
5530
✓
migr
Service
Recovery
Mgmt3
SPM4
E5000 Messaging Systems for Microsoft Exchange
E5000 G2
✓
E5000
✓
Tape Storage
EML (CV Tape Library 2.8 and 3.0)
✓
ESL-e (CV Tape Library 2.8 and 3.0)
✓
ESL G3 (CV Tape Library 2.8 and 3.0)
✓
MSL G3 (CV Tape Library 2.8 and 3.0)
✓
MSL 6480 Tape Library
✓
1
Insight Control server provisioning does not support deployment of boot from SAN (iSCSI) in multipath configuration.
2
For physical server storage provisioning, Matrix Operating Environment supports any Fibre Channel storage device that fulfills the
requirements in “Matrix OE storage support” (page 43). For details on VM storage support, see Table 33 (page 42).
See “Storage support for Matrix recovery management” (page 44).
3
4
5
6
7
SPM 2.4 bundled with 7.4 supports BNA 11.1.3, 11.1.4, 11.1.5, 12.1.4, 12.3.1 or HP B-Series SAN Network Advisor 11.1.3,
11.1.4, 11.1.5, 12.1.4, or 12.3.1
Matrix OE users who are using SPM must be aware that there is an incompatibility between 3PAR OS 3.1.x to 3.1.2 or later and
SPM versions 2.2.0 and earlier (bundled with Insight Management 7.2 and 7.2U1). See the HP Matrix Operating Environment
7.3 Release Notes for more information.
SPM supports 3PAR StoreServ Fibre Channel and provides varied support for a number of 3PAR StoreServ options such as Virtual
Domains, Autonomic Groups, and Peer Motion. See HP Storage Provisioning Manager (SPM) User Guide for more information.
Supported as VM backing store only.
8
HP P6000 Command View Software versions 10.2, 10.3, 10.3.1, 10.3.2, 10.3.3, and 10.3.4 are supported.
9
Supports the Matrix Operating Environment storage pool entry validation feature.
10
Storage Provisioning Manager supports the listed models of XP (with micro-program version V04/V05/V06 or those listed for the
P9500) storage solutions for automated catalog import and presentation, but does not support on-demand provisioning.
Fibre channel storage and switch recommendations
HP recommends the HP storage solution portfolio of products, which includes:
40
•
3PAR StoreServ
•
P6000 EVA
•
P9000 XP
You must provide connectivity to a compatible Fibre Channel SAN array. Customer-supplied Fibre
Channel switches to an external SAN must support boot from SAN and NPIV functionality.
To obtain a list of switches and storage devices that are supported by Virtual Connect Fibre Channel:
1. Open a browser to the following website:
http://www.hp.com/storage/spock
2.
3.
If you are a new user and do not have an HP Passport account, register for an account. If you
have an account, sign in.
Navigate to Other Hardware→Virtual Connect→HP VC 8Gb 24-Port Module.
iSCSI SAN
iSCSI is supported only as a virtual backing store (not a physical server booting from iSCSI or a
virtual machine directly accessing raw iSCSI LUNs).
To use iSCSI, you must provide connectivity to a compatible iSCSI SAN. As with Fibre Channel
storage, the storage vendor generally certifies end-to-end support for an iSCSI storage device.
VMware and Microsoft independently certify third-party devices with their respective operating
systems, hypervisors, and iSCSI initiators. Confirmation of device support by the hypervisor vendor
is a prerequisite to support in Insight Management.
NOTE: For security, reliability, and performance, HP recommends separate, dedicated iSCSI
networks for iSCSI LAN traffic.
iSCSI targets as backing storage for VM guests
HP recommends the following iSCSI targets as backing storage for virtual machine guests:
Table 32 iSCSI targets as backing storage for VM guests
iSCSI targets
See
HP 3PAR StoreServ 10000, StoreServ 7000 iSCSI
www.hp.com/go/storeserv
HP StoreVirtual Storage
www.hp.com/go/storevirtual
Other iSCSI targets certified and supported by the storage vendor and Microsoft Hyper-V and
VMware ESX, see storage vendor's documentation.
iSCSI device references
For more information on support for HP iSCSI devices, see the following website:
http://www.hp.com/storage/spock
For more information on Windows and VMware support for iSCSI devices, see the following
websites:
•
Windows: http://www.windowsservercatalog.com/
•
VMware: http://www.vmware.com/resources/compatibility/search.php
iSCSI LAN/VLAN switches
HP recommends the following dedicated iSCSI LAN/VLANs for iSCSI implementations:
•
HP ProCurve 6600 series (models with 10 GB option)
•
HP ProCurve 8200zl series
•
HP ProCurve 5400zl series
41
Storage options for virtual machine guests
VMware and Microsoft independently certify third-party devices with their respective operating
systems, hypervisors, and iSCSI initiators. Confirmation of device support by the hypervisor vendor
is a prerequisite to support in Insight Management.
Table 33 Storage options for VM guests
VMware VM
Storage type
VMFS
RDM
✓
✓3
iSCSI
✓4, 5
✓6
DAS
✓7
✓7
SAS
✓7
✓7
Fibre Channel
2
3
4
5
6
7
NFS
NTFS
✓
✓
Disk
Pass-Through
SLVM with
(RDM)
Serviceguard
✓3
✓
SAN-based
(or
NPIV-based)
Storage2
✓
3
5, 7
✓7
NAS
1
Integrity VM1
Microsoft Hyper-V VM
Integrity VM virtual machine guests must have an HP-UX operating system type. Windows and Linux guests are not supported. For
more information about requirements and restrictions for Integrity VM hosts running on HP-UX, see Table 53 (page 61).
Integrity VM supports NPIV for the Emulex HBA and Converged Network Adapter from HPVM version B.06.30.
Not supported by Matrix OE for shared data disks. Supported for boot or private data disks, but raw LUNs (VMware RDM, Hyper-V
Disk Pass-Through, or Integrity VM SAN-based or NPIV-based disks) cannot be shared among VMs.
Matrix recovery management supports only 3PAR StoreServ iSCSI (Table 31 (page 37)) as VM backing store. For other iSCSI
storage systems that Matrix Operating Environment supports, Matrix recovery management provides a user-defined storage adapter
interface specification for integration. For more information, see HP Matrix Operating Environment Recovery Management User
Guide and also “iSCSI SAN” (page 41).
Customer must provide connectivity to a compatible iSCSI SAN. End-to-end support for iSCSI storage use by the hypervisor is
generally certified by the storage vendor.
Not supported by Matrix OE, including Matrix infrastructure orchestration and Matrix recovery management software.
Not supported by Matrix recovery management.
Matrix OE support in VMware VXLAN environments
The 7.3 release (or later) includes support for VMware VXLAN with specific prerequisites and
considerations. Correctly configured and used, Matrix OE can provision and import VMs in an
environment using VMware VXLAN. Specifically, Matrix OE is able to provision infrastructure using
virtual networks from vShield Manager, configured under dvSwitches. Customers can use
infrastructure orchestration to display networks from vCenter, configure those networks in
infrastructure orchestration, assign networks to organizations, and provision infrastructure using
service templates.
Flat SAN
Matrix Operating Environment supports the use of Flat SAN technology by several hypervisors to
direct connect from the FlexFabric module to an HP 3PAR StoreServ Storage System. The following
configurations for each hypervisor are supported:
42
•
VMware (standalone and clustered): VMs using file-based and/or RDM volumes from Flat
SAN connected 3PAR (hypervisor configured to use Flat SAN out-of-band to Matrix)
•
Hyper-V (standalone and clustered): VMs using file-based and/or Disk Pass-Through volumes
from Flat SAN connected 3PAR (hypervisor configured to use Flat SAN out-of-band to Matrix)
•
Integrity VMs: VMs using file-based and SAN-based LUNs through AVIO (hypervisor configured
to use Flat SAN out-of-band to Matrix, AVIO SAN-based LUNs configured out-of-band to
Matrix, and Matrix only provisions NPIV-based LUNs); Flat SAN requires FlexFabric modules.
Integrity VM supports NPIV for the Converged Network Adapters.
HP CloudSystem Matrix does not provision volumes for physical servers from the direct connect
HP 3PAR StoreServ Storage System.
Matrix OE storage support
Matrix OE supports the use of virtual and physical logical servers. “Storage options for virtual
machine guests” (page 42) lists the virtual server storage options. Physical logical servers use
storage provisioned from the SAN for flexible movement.
HP recommends Fibre Channel Storage Area Network (SAN) with boot-from-SAN capability (for
physical blade deployments). Matrix OE supports any Fibre Channel storage solution, which
supports the Virtual Connect environment (including the ability to present storage to an initiator
WWN which is not yet visible on the fabric), N_Port ID Virtualization (NPIV), and boot-from-SAN
capability. Matrix OE supports SAN-based storage for Integrity VM logical servers. For more
information, see the HP Matrix Operating Environment Logical Server Management User Guide.
To realize the benefits of Virtual Connect logical servers, including the ability to move logical
servers and to easily repurpose server blades associated with inactive logical servers, you must
remove or disable any local disks.
Matrix OE supports VMware vSphere Storage DRS automated load balancing, including use of
multiple datastores.
Storage support for Matrix OE Provisioning
The storage validation feature of Matrix OE logical server management is supported on the following
HP disk arrays:
•
•
HP P2000 G3 MSA Storage, HP MSA 2040 Fibre Channel, MSA 1040 Fibre Channel,
◦
Using explicit or default mapping
◦
MSA SMI-S provider version 1.1.2 or later
EVA 4x00/6x00/8x00 and HP P6300/P6350/P6500/P6550
NOTE: Support for a password-protected HP P6000 EVA Storage System array requires the
HP P6000 Command View Software to be configured to enable password access to the array
(with the same password as is set on the array).
Matrix OE logical server capabilities, including storage validation and integration with the HP
Storage Provisioning Manager (SPM), supports HP P6000 Command View Software versions 10.2,
10.3, 10.3.1, 10.3.2, and 10.3.3, and 10.3.4 .
HP Matrix Operating Environment supports pre-provisioned Fibre Channel storage and on-demand
provisioned storage though integration with HP Storage Provisioning Manager. SPM supports the
3PAR StoreServ, P6000/EVA, and HP P9000/XP Storage Systems. On-demand provisioning
(including automated zoning of Brocade SAN environments) is supported for 3PAR StoreServ and
EVA. For more information, see the HP Storage Provisioning Manager (SPM) User Guide, which
is available from the HP Enterprise Information Library: HP Enterprise Information Library
On-demand provisioning is also supported for the EMC Symmetrix VMAX storage arrays through
the HP SPM adapter. When HP Matrix Operating Environment 7.4 is installed on the CMS, the
SPM adapter for EMC Symmetrix VMAX will be installed on the system. By default, the HP SPM
adapter for EMC Symmetrix VMAX is disabled. For more information on enabling the HP SPM
adapter for EMC Symmetrix VMAX, see HP Insight Management Installation and Configuration
Guide, available from the Matrix Operating Environment information library: http://www.hp.com/
go/matrixoe/docs
43
Storage support for Matrix recovery management
Use of Matrix recovery management requires any of the following plus replication software:
•
HP 3PAR StoreServ Storage
•
HP P6000 EVA Storage System
•
HP P9000 XP Storage System
Matrix recovery management replicates data between the primary and recovery sites using HP
3PAR Remote Copy replication software, HP P6000 Continuous Access Software, or HP 9000
Continuous Access Software. Each site requires its own instance of HP P6000 Command View
Software to manage the HP P6000 EVA arrays or HP P9000 XP Storage Systems storage
management station to manage HP P9000 arrays associated with that site.
Matrix recovery management supports HP 3PAR StoreServ with Remote Copy synchronous and
asynchronous replication as follows:
•
CLX/3PAR (v2.0 or later) and 3PAR OS CLI must be installed on CMS.
•
CLI version must be the same as the 3PAR OS management server.
•
Matrix recovery management supports any HP 3PAR StoreServ Storage and 3PAR OS supported
by CLX/3PAR.
Matrix recovery management supports HP P9000 XP Storage System arrays with Continuous Access
Synchronous and Asynchronous Replication as follows:
•
CLX/XP (v3.0.1 or later) must be installed on storage management station running either
Microsoft Windows Server 2003 or Microsoft Windows Server 2008
•
Matrix recovery management supports any XP array that is supported by CLX/XP
NOTE: For the latest list of HP 3PAR StoreServ Storage, 3PAR OS, P6000/EVA, and HP P9000/XP
Storage Systems supported by CLX, see the following website:
http://www.hp.com/go/clx
Matrix recovery management supports P6000/EVA family storage solutions with Continuous Access
Synchronous and Asynchronous Replication.
Supported hardware network products
Network switches
•
HP 5920AF-24XG (JG296A)
•
HP 5830AF-48G (JC691A)
•
HP 5120-16G-SI (JE073A)
•
HP 5820-24XG-SFP+ (JC102A)
•
HP 5800-48G (JC105A)
•
HP 6125G/XG Blade Switch
•
HP 6125G Blade switch
•
Mellanox SX1018 HP Enet Switch
•
H3C Switch
HP Virtual Connect Enterprise Manager hardware
Table 34 (page 45) lists hardware requirements for Virtual Connect Enterprise Manager.
44
Table 34 Virtual Connect Enterprise Manager hardware support
Component
Supported VC modules
Virtual Connect Ethernet modules
• HP Virtual Connect 1/10 Gb Ethernet Module
• HP Virtual Connect 1/10 Gb-F Ethernet Module
• HP Virtual Connect Flex-10 10 Gb Ethernet Module
• HP Virtual Connect Flex-10/10D Module for BladeSystem c-Class
Fibre Channel modules
• HP 4 Gb Fibre Channel Module
• HP 8 Gb 24-port Fibre Channel Module
• HP 8 Gb 20-port Fibre Channel Module
FlexFabric
• HP FlexFabric 10Gb/24-port Module for c-Class BladeSystem
• HP FlexFabric 20/40 F8 Module
Other supported hardware
As a general rule, Insight Management supports all the following items, and their plug-in equivalents,
assuming that they are installed with the latest firmware and drivers.
•
External Ethernet switches
•
Embedded network interface cards (NICs)
•
Smart Array controllers, host bus adapters (HBAs)
•
HP BladeSystem mezzanine cards
•
HP IO Accelerators
For information on the storage controllers, converged network adapters (CNAs), and network
interface cards (NICs) supported by Insight Control server migration, see “Hardware requirements
and caveats for Insight Control server migration” (page 85).
For information on the storage controllers, converged network adapters (CNAs), and network
interface cards (NICs) supported by Insight Control server provisioning, see “Hardware requirements
and caveats for Insight Control server provisioning” (page 94).
For information on the HP IO Accelerators (supported in Matrix OE versions 7.2, 7.2.1, 7.2.2,
7.3, 7.3.1, 7.3.2, and 7.4), see http://h18004.www1.hp.com/products/storageworks/
io_accelerator/index.html. There are whitepapers available online that describe the setup and
scenarios for using the HP IO Accelerators at: http://www.hp.com/go/insightmanagement/docs
Other supported hardware
45
5 Managed system firmware
This chapter provides the firmware recommendations for servers and devices that can be licensed
and managed by Insight Management.
Service Pack for ProLiant
HP Service Pack for ProLiant (SPP) is a collection of individual systems software and firmware,
offered as a solution for all the following HP ProLiant servers, including all Gen8 and Gen9 servers:
•
HP BladeSystem c-Class ProLiant Server Blade
•
HP ProLiant DL100, DL300, DL500, DL6001, DL700, and DL900 series rack mount servers
•
HP ProLiant ML300 and ML500 series tower servers
•
HP ProLiant SL1001, SL2001, SL300, and SL4000 series scalable system servers
•
HP ProLiant BL460c
•
HP ProLiant DL60, DL80, DL160, DL180, DL360, DL380, DL380z
•
HP ProLiant ML350
•
HP ProLiant SL6700
•
HP ProLiant XL220a
•
HP ProLiant XL230a
Updating servers, BladeSystems, and BladeSystem enclosures using the SPP with HP Smart Update
Manager (HP SUM) is faster and more efficient because only the necessary components are
preloaded.
The SPP is delivered as an ISO image. There are also four subsets, also delivered as ISOs. They
are optimized by operating systems and ProLiant server types. Each subset version includes software
and firmware smart components required for its specific audience and allows for a customized
solution and a faster download. The ISOs available are:
•
HP Service Pack for ProLiant
•
BladeSystem Red Hat Enterprise Linux Pack
•
BladeSystem Microsoft Windows Server Pack
•
ProLiant ML/DL/SL Red Hat Enterprise Linux Pack
•
ProLiant ML/DL/SL Microsoft Windows Server Pack
Table 35 Service Pack for ProLiant
Service pack name
HP Service Pack for ProLiant (SPP)
For information on the contents on this service pack,
see: www.hp.com/go/spp.
Version
2014.09.0
Download from
www.hp.com/go/spp/download
There you will find a consolidated
download and four subsets optimized by
OS and server type.
Select the download for the version
specified in the Version column from
among the SPP downloads there.
1. (Gen8 only)
46
Managed system firmware
Integrity Support Packs
Table 36 Integrity Support Packs
Support pack name
Version
Download from
HP Integrity Support Pack for Windows servers
7.2.2.0
HP Integrity Essentials Foundation Pack for Linux
Support Pack
4.23
Download the Integrity Support Packs and
system firmware bundles for your server
model and OS from the HP Support &
Drivers website:
http://welcome.hp.com/country/us/en/
support.html
System firmware bundles are available for HP Integrity N/A
Superdome 2 servers, HP rx2800 i2 servers, HP
rx2800 i4 and rx2900 i4 servers
Insight Management firmware recommendations
The HP Insight Management software was tested with the SPP version specified in Table 35 (page
46). The following table lists the key items of firmware and their versions that were used during
Insight Management testing. Unless noted otherwise, the listed items are included in the SPP. This
list is not intended to indicate the full supported list of firmware for Insight Management. For details
on compatibility and support of prior firmware versions, see the Insight Management documentation.
Table 37 Recommended firmware requirements for Insight Management
Item
Recommended firmware version
Intelligent Provisioning
2.00 (Gen 9)
1.60 (Gen 8)
1.61 (Gen 8)
2.01 (Gen 9)
Onboard Administrator (OA) on the following HP BladeSystem
enclosures:
4.30
• c3000
• c3000 Tower enclosure
• c7000
• c7000 Platinum enclosure
Virtual Connect for BladeSystem c-Class
NOTE:
4.31
To download Virtual Connect firmware only, go to the following website:
http://h18004.www1.hp.com/products/blades/components/vc-interconnects.html
For Virtual Connect firmware compatible with the Virtual Connect Enterprise Manager, see the HP Virtual Connect
Enterprise Manager User Guide at the following website:
NOTE:
Use OA version 4.22 for enclosures with ProLiant, Integrity, or a mix of ProLiant and Integrity server blades.
HP iLO 2 for ProLiant BladeSystem
2.25
HP iLO 2 Advanced for Integrity
3.18
1.80
1.55.02
2.02
1.62.05
Baseboard Management Controller (BMC) Firmware
5.38
HP Smart Update Manager (HP SUM)
7.1.0
Integrity Support Packs
47
6 Managed systems software
This chapter lists the software that is supported on managed systems, including integration with
HP companion software, operating systems, and hypervisors.
HP software integration
Table 38 (page 48) lists HP software integration requirements with this release of Insight
Management.
Table 38 HP Software integration requirements
Systems Insight
Manager
HP Software product and version
Insight Control
Matrix OE
HP Cloud Service Automation 3.2, 4.0, and 4.1
✓
HP Server Automation (HP SA) 9.05, 9.06, 9.10, 9.11, 9.12, 9.13, 9.14,
9.1 Satellite, 9.15, 9.16, and 10.0, and 10.10
✓
HP Operations Orchestration 9.07 and 10.10
✓
HP SiteScope 11.10
✓
Supported operating systems
This section lists the operating systems that are supported on managed systems.
Insight Control server provisioning supports Windows and Linux. To verify that a particular server
supports a specific OS, see the following certification and support website: http://
h18004.www1.hp.com/products/servers/windows/index.html.
VCEM supports all operating systems that Virtual Connect supports. To verify that a particular server
blade that you place into a BladeSystem enclosure supports a specific OS, review the QuickSpecs
for that server blade, which you can obtain by starting at this website:
http://www.hp.com/go/blades.
Microsoft Windows
Table 39 Microsoft Windows Server 2012
Insight Control
SIM
migr
perf
pwr
srvr
prov1
Microsoft Windows Server 2012 R2 Standard Edition3
✓
✓4
✓
✓
✓
✓
Microsoft Windows Server 2012 Standard Edition3
✓
✓
✓
✓
✓
✓
Microsoft Windows Server 2012 R2 Datacenter Edition3
✓
✓4
✓
✓
✓
✓
Microsoft Windows Server 2012 Datacenter Edition3
✓
✓
✓
✓
✓
✓
Microsoft Windows Server 2012 Essentials
✓
Microsoft Windows Server 2012 Foundation
✓
OS version
Storage Server
✓
Microsoft Windows Storage Server 2012 Standard
✓
48
Managed systems software
virt2
Matrix
OE
1
2
Microsoft does not support windows deployment with multipath feature enabled. Hence, it must be disabled before deploying a
Windows OS Build Plan with Insight Control server provisioning. After deployment, multipath can be enabled.
Insight Control virtual machine management support does not apply to this operating systems.
3
Support for Server Core installations of all these editions is limited to HP SIM and IC server provisioning.
4
Supported by Windows 2008 x64/ Windows 2008 R2/ Windows 2012 CMS by installing Windows ADK on the CMS and
activating DISM 6.3 in IC Migration Application.
Insight Control
OS version
SIM
migr
perf
pwr
Microsoft Windows Server 2008, Standard Edition, x86
✓
✓
✓
✓
Microsoft Windows Server 2008, Standard Edition, x64
✓
✓
✓
✓
Microsoft Windows Server 2008, Standard Edition SP2, x86
✓
✓
✓
✓
✓
✓
✓
✓
Microsoft Windows Server 2008 R2 Standard Edition x64
only
✓
✓
✓
✓
Microsoft Windows Server 2008 R2 Standard Edition SP1
x64 only
✓
✓
✓
✓
Microsoft Windows Server 2008, Datacenter Edition, x86
✓
✓
✓
✓
Microsoft Windows Server 2008, Datacenter Edition, x64
✓
✓
Microsoft Windows Server 2008, Datacenter Edition SP2,
x86
✓
✓
✓
✓
Microsoft Windows Server 2008, Datacenter Edition SP2,
x64
✓
✓
✓
✓
Microsoft Windows Server 2008 R2 Datacenter Edition x64
only
✓
✓
✓
✓
Microsoft Windows Server 2008 R2 Datacenter Edition SP1
x64 only
✓
✓
✓
✓
Microsoft Windows Server 2008, Enterprise Edition, x86
✓
✓
✓
✓
Microsoft Windows Server 2008, Enterprise Edition, x64
✓
✓
✓
✓
Microsoft Windows Server 2008, Enterprise Edition SP2, x86
✓
✓
✓
✓
✓
✓
✓
✓
Microsoft Windows Server 2008 R2 Enterprise Edition x64
only
✓
✓
✓
✓
Microsoft Windows Server 2008 R2 Enterprise Edition SP1
x64 only
✓
✓
✓
✓
✓
✓
srvr
prov1, 2
virt3
Matrix OE
Standard Editions4
✓
✓
✓
✓
✓
✓
Datacenter Editions4
✓
✓
✓
✓
✓
✓
✓
Enterprise Editions4
✓
✓
✓
✓
✓
✓
HPC Server
Microsoft Windows HPC Server 2008 R2
✓
Windows Server for Itanium-based systems
Microsoft Windows Server 2008 for Itanium-based systems
✓
✓
49
Table 40 Microsoft Windows Server 2008 (continued)
Insight Control
OS version
SIM
migr
perf
pwr
srvr
prov1, 2
virt3
Matrix OE
Microsoft Windows Server 2008 for Itanium-based systems
SP2
✓
✓
✓5
Microsoft Windows Server 2008 R2 for Itanium-based systems
✓
✓
✓5
✓
Storage Server
Microsoft Windows Storage Server 2008
✓
✓
Microsoft Windows Storage Server 2008 R2 SP1
✓
Web Server
Microsoft Windows Web Server 2008, x86
✓
✓
Microsoft Windows Web Server 2008, x64
✓
✓
Microsoft Windows Web Server 2008 SP2, x86
✓
✓
✓
✓
Microsoft Windows Web Server 2008 SP2, x64
✓
✓
✓
✓
Microsoft Windows Server 2008 R2 Web Server (initial
release)
✓
✓
✓
✓
Microsoft Windows Server 2008 R2 Web Server SP1
✓
✓
✓
✓
1
2
3
✓
✓
✓
✓
✓
Microsoft Windows 2008 SP2 and Windows server 2008 R2 SP1 deployments are supported using WinPE 3.x Service OS which
is via PXE or Intelligent Provisioning 1.50 or earlier.
Insight Control virtual machine management support does not apply to these operating systems.
4
Support for Server Core installations of all these editions is limited to HP SIM.
5
Matrix recovery management and Matrix infrastructure orchestration do not support Microsoft Windows running on Integrity based
systems.
Insight Control
SIM1
migr
perf
pwr
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Microsoft Windows Server 2003 R2, Standard Edition, x86
✓
✓
✓
✓
Microsoft Windows Server 2003 R2, Standard Edition, x64
✓
✓
✓
✓
Microsoft Windows Server 2003 R2, Standard Edition SP2,
x86
✓
✓
✓
✓
✓
Microsoft Windows Server 2003 R2, Standard Edition SP2,
x64
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
OS version
srvr prov
virt2
Matrix
OE
Standard Editions
Datacenter Editions
Microsoft Windows Server 2003, Datacenter Edition SP2, x86
50
Table 41 Microsoft Windows Server 2003 (continued)
Insight Control
OS version
1
srvr prov
virt2
SIM
migr
perf
pwr
Matrix
OE
Microsoft Windows Server 2003, Datacenter Edition SP2, x64
✓
✓
✓
✓
✓
Microsoft Windows Server 2003, Datacenter Edition SP2 for
Itanium-based systems
✓
✓
✓5
Microsoft Windows Server 2003 R2, Datacenter Edition, x86
✓
✓
Microsoft Windows Server 2003 R2, Datacenter Edition, x64
✓
✓
Microsoft Windows Server 2003 R2, Datacenter Edition SP2,
x86
✓
✓
✓
✓3
Microsoft Windows Server 2003 R2, Datacenter Edition SP2,
x64
✓
✓
✓
✓3, 4
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Microsoft Windows Server 2003, Enterprise Edition SP2 for
Itanium-based systems
✓
✓
✓5
Microsoft Windows Server 2003 R2, Enterprise Edition, x86
✓
✓
✓
✓
Microsoft Windows Server 2003 R2, Enterprise Edition, x64
✓
✓
✓
✓
Microsoft Windows Server 2003 R2, Enterprise Edition SP2,
x86
✓
✓
✓
✓
✓
Microsoft Windows Server 2003 R2, Enterprise Edition SP2,
x64
✓
✓
✓
✓
✓
Microsoft Windows Server 2003, Web Edition SP2, x86
✓
✓
✓
✓
✓
Microsoft Windows Server 2003 R2, Web Edition, x86
✓
✓
Microsoft Windows Server 2003 R2, Web Edition, x64
✓
✓
Microsoft Windows Server 2003 R2, Web Edition SP2, x86
✓
✓
✓
✓
Microsoft Windows Server 2003 R2, Web Edition SP2, x64
✓
✓
✓
✓
Enterprise editions
Web editions
1
Supported only with IPv4. See the white paper IPv6 Support in Insight Management for detailed information.
2
3
Not supported by Matrix OE as a VMware guest OS.
4
Matrix infrastructure orchestration does not support this OS for VMware ESX template-based provisioning.
5
Matrix recovery management and Matrix infrastructure orchestration do not support Microsoft Windows running on Integrity based
systems.
Table 42 Microsoft Windows Small Business Server operating systems
Insight Control
OS version
SIM
migr
perf
pwr
srvr
prov
virt1
Matrix OE
Microsoft Windows Small Business Server 2011
Microsoft Windows Small Business Server 2011 Standard
(initial release)
✓
✓
51
Table 42 Microsoft Windows Small Business Server operating systems (continued)
Insight Control
OS version
Microsoft Windows Small Business Server 2011 Essentials
(initial release)
SIM
migr
✓
perf
pwr
srvr
prov
virt1
Matrix OE
✓
Microsoft Windows Small Business Server 2008 Standard
Edition (initial release)
✓
Microsoft Windows Small Business Server 2008 Premium
Edition
✓
Microsoft Windows Small Business Server 2003 R2, Standard
Edition
✓
Microsoft Windows Small Business Server 2003 R2, Premium
Edition
✓
1
Table 43 Microsoft Windows Vista
Insight Control
OS version
SIM
Microsoft Windows Vista Business SP2, x86
✓
Microsoft Windows Vista Business SP2, x64
✓
Microsoft Windows Vista Enterprise SP2, x86
✓
Microsoft Windows Vista Enterprise SP2, x64
✓
1
2
migr
perf1
pwr
srvr
prov
virt2
Matrix OE
Insight Control performance management supports x86 and x64 versions of Microsoft Windows Vista Business and Microsoft
Windows Vista Enterprise on only ProLiant WS460c G6, ProLiant xw460c, and ProLiant xw2x220c workstation blades.
Insight Control virtual machine managementsupport does not apply to these operating systems.
Table 44 Microsoft Windows 7
OS version
SIM
migr
perf
pwr
srvr
prov1
Microsoft Windows 7 SP1, Professional and Enterprise, x86
✓
✓
Microsoft Windows 7 SP1, Professional and Enterprise, x64
✓
✓3, 4
1
2
virt2
Matrix OE
3
Does not support Enterprise version.
4
Microsoft Windows 7 SP1 Professional x64 deployments are supported using WinPE 3.x Service OS which is via PXE or Intelligent
Provisioning 1.50 or earlier and only supported on ProLiant WS460c Gen8 . The Windows 7 Build Plans PXE boot by default.
52
Linux
Table 45 Red Hat Enterprise Linux (RHEL)
Insight Control
OS version
SIM
migr1
srvr
prov
virt2
perf
pwr
Matrix OE
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓4
Red Hat Enterprise Linux 5
RHEL 5.3 for x86
RHEL 5.3 for AMD64 and Intel x86-64
RHEL 5.3 for Intel Itanium
3
✓
RHEL 5.4 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
RHEL 5.4 for Intel Itanium3
✓
✓
✓4
RHEL 5.5 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
RHEL 5.5 for Intel Itanium3
✓
✓
✓4
RHEL 5.6 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓4
RHEL 5.7 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓4
RHEL 5.8 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓4
RHEL 5.9 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
RHEL 5.10 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
5
✓
✓
✓4
✓
✓5
✓
✓
✓
RHEL 6.0 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
RHEL 6.1 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
RHEL 6.2 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
RHEL 6.3 for x86
✓
✓
✓
✓
✓
6
53
Table 45 Red Hat Enterprise Linux (RHEL) (continued)
Insight Control
SIM
migr1
perf
pwr
srvr
prov
✓
✓
✓
✓
✓7
RHEL 6.4 for x86
✓
✓
✓
✓
✓
✓
✓
✓
RHEL 6.5 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
OS version
virt2
Matrix OE
✓
✓8
✓8
✓
✓
RHEL 7 for AMD64 and Intel x86-64
1
2
3
4
5
6
7
8
For the caveats associated with migrating Linux servers, see “Hardware requirements and caveats for Insight Control server migration”
(page 85) .
Integrity Linux SMX Provider 3.0 is a required WBEM Provider for Integrity Linux operating systems. SMX 3.0 requires RHEL 5 or
later.
Matrix infrastructure orchestration and Matrix recovery management are not supported on any Linux operating systems that are
running on Integrity systems.
To configure SAN multipath devices, mpath is required for the kernel_arguments custom attribute.
Red Hat Linux 6.1 deployments to Thin provisioned Boot LUNs on EVA storage devices are not supported by Insight Management.
Thin provisioned data LUNs are supported.
Insight Control server provisioning does not support RHEL 6.3 on HP ProLiant ML10, SL2500 Gen8, or any Gen8 server configured
with an Intel EP v2 Xeon processor.
Table 46 SUSE Linux Enterprise Server (SLES)
Insight Control
OS version
migr1, 2
perf
pwr
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓5
srvr prov
virt3
Matrix
OE
SIM
SUSE Linux Enterprise Server 10
SLES 10 SP3 for x86
SLES 10 SP3 for AMD64 and Intel x86-64
4
SLES 10 SP3 for Intel Itanium
✓
SLES 10 SP4 for x86
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
SLES 10 SP4 for Intel Itanium4
✓
✓
✓5
SUSE Linux Enterprise Server 11
SLES 11 SP1 for x866
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
SLES 11 SP1 for Intel Itanium4, 6
✓
✓
✓5
SLES 11 SP2 for x86
✓
✓7
✓
✓
✓
✓
✓7
✓
✓
SLES 11 SP2 for Intel Itanium4
✓
54
✓
✓7, 9
✓
✓5
Table 46 SUSE Linux Enterprise Server (SLES) (continued)
Insight Control
OS version
SLES 11 SP3 for x86
6
4
1
2
SIM
migr1, 2
perf
pwr
✓
✓
✓
✓
✓
✓
✓
Matrix
OE
✓
9, 10
✓
✓
virt3
srvr prov
✓
✓
✓5
✓
For the caveats associated with migrating Linux servers, see “Hardware requirements and caveats for Insight Control server migration”
(page 85) .
SLES 11 SP1 or earlier is not supported on Microsoft Windows Server 2012 with Hyper-V.
3
4
Integrity Linux SMX Provider 3.0 is a required WBEM provider for Integrity Linux operating systems. SMX 3.0 requires SLES 10 or
11.
Matrix recovery management is not supported on any Linux operating systems that are running on Integrity systems.
5
6
SLES 11 SP1, SP2, and SP3 require an errata to support G7 with AMD Opteron 6200 series and Gen8 servers.
7
SLES 11 SP2 requires a kISO errata to support ML310e Gen8 v2 and DL320e Gen8 servers. For more information, see the HP
Insight Control Release Notes.
SLES 11 SP2 displays duplicate drives for servers with multiple paths.
8
9
To configure SAN multipath devices, refer to the HP Insight Control 7.4 Release Notes where script information should be added
to a SLES11 Build Plan.
10
SLES 11 SP3 requires kISO errata when deploying to Gen9 servers
Table 47 Other variants of Linux
Insight Control
OS version
SIM
migr
perf
pwr
srvr
prov
virt
Matrix OE
Debian
Debian 7.2
✓
Ubuntu
Ubuntu 10.04 LTS
✓
Ubuntu 12.04 LTS
✓
Ubuntu 12.04.3
✓
Ubuntu 13.10
✓
Ubuntu 14.04
✓
Oracle Enterprise Linux
Oracle Enterprise Linux 5.6, x86
✓
Oracle Enterprise Linux 5.6 for AMD64 and Intel, x86-64
✓
✓
✓
✓
✓
Oracle Enterprise Linux 6.2
✓
55
HP-UX, HP NonStop, and HP OpenVMS
For Insight Management products that support HP Integrity servers, HP 9000 servers, and HP
NonStop servers, Table 48 (page 56) lists the HP operating systems that are supported on managed
systems.
Table 48 HP operating systems: HP-UX, NonStop, and OpenVMS
Insight Control
OS version
SIM
migr
perf
pwr1
srvr
prov
virt
Matrix OE
HP-UX
HP-UX 11i v2 (11.23 IA only)
✓
✓
✓2
HP-UX 11i v2 Update 2 (11.23 IA/PA)
✓
✓
✓2
HP-UX 11i v3 (11.31)3, 4
✓
✓
✓5
HP-UX 11i v3 (11.31) 12094
✓
✓
✓5
HP-UX 11i v3 (11.31) 1303 and 14034
✓
✓
✓5
HP NonStop
HP NonStop G-Series, G06.15 and later
✓
HP NonStop H-Series, H06.04 and later
✓
✓
HP NonStop J-Series, J06.03 and later
✓
✓6
HP OpenVMS 8.3 1H17
✓
✓
✓
HP OpenVMS 8.4
✓
✓
✓8
HP OpenVMS
1
2
8
Licensing for Insight Control power management is provided through OpenVMS version 8.4 base operating environment (BOE)
for Integrity servers only.
Matrix recovery management and infrastructure orchestration are not supported on this HP-UX operating system.
3
To support Integrity/HP-UX cross-technology logical server operations, this operating system requires the EFI and AVIO Storage
and Networking patches.
The EFI patch (number is PHKL_41895 or later) is available at HP Support Center.
The AVIO Storage and Networking software is available at http://software.hp.com (search for AVIO).
4
Capacity Advisor supports this OS on VSP 6.1 and 6.2 with limitations (see HP Matrix Operating Environment Release Notes).
5
Matrix recovery management is not supported on this HP-UX operating system.
6
Power Regulator is supported on J06.14 and later.
7
Integrity VM Manager was not tested with HP OpenVMS 8.3.
8
Only Matrix OE visualization software, Capacity Advisor Consolidation software, and Global Workload Manager software support
OpenVMS.
Superdome 2 is supported as a virtual machine host/destination for a P2V or V2V migration. In
addition, V2P and V2V migrations are supported from Superdome 2.
For information on how to migrate workloads between physical and virtual servers, see the How
to migrate HP-UX workloads between physical and virtual servers easily whitepaper at http://
www.hp.com/go/hpux-hpvm-docs. For information on how to use the HP-UX Portable Image Tool
for Integrity fluid cross-technology moves, see http://h20195.www2.hp.com/V2/
GetDocument.aspx?docname=4AA4-2136ENW&cc=us&lc=en >.
56
AIX, Solaris, and Netware
Table 49 IBM AIX
Insight Control
OS version
SIM
IBM AIX Version 5.3
✓
IBM AIX Version 6.1
✓
migr
perf
pwr
srvr
prov
virt
Matrix OE
Table 50 Oracle Solaris
Insight Control
OS version
SIM
Oracle Solaris 8 Intel Platform
✓
Oracle Solaris 9 Sparc
✓
✓
Oracle Solaris 10 Sparc
✓
✓
✓
migr
perf
pwr
srvr
prov
virt
Matrix OE
virt
Matrix OE
Table 51 Novell NetWare
Insight Control
OS version
Novell NetWare 6.5
SIM
migr
perf
pwr
srvr
prov
✓
Supported hypervisor hosts and VM guests
Table 52 (page 58) lists hypervisor hosts and VM guests supported on managed systems. The letter
h (host) in a column means that the corresponding application manages this hypervisor running
as a VM host. Similarly, the letter g (guest) in a column means that the corresponding application
supports VM guests under this hypervisor.
For Insight Control server provisioning, the letter h (host) means that server provisioning can deploy
that hypervisor, and the letter g (guest) means that server provisioning can deploy to VM guests
on that particular hypervisor. To verify that a particular server supports a specific hypervisor, see
the following certification and support website: http:// h18004.www1.hp.com/products/servers/
windows/index.html. The minimum required memory for any target server is 2 GB.
Integrity VM Manager supports the Integrity VM hypervisors listed in Table 52 (page 58).
Hypervisor hosts are not supported for DR protection with Matrix recovery management, including
hosts managed via a VC-hosted logical server.
Insight Control virtual machine management does not support VMware ESX or ESXi download
editions or VMware ESX/ESXi servers without a valid license.
57
NOTE: For ProLiant customers wanting to manage a KVM cloud, Matrix 7.4 can create KVM
virtual machines in a next-generation HP CloudSystem resource pool (through either HP CloudSystem
Foundation or next-generation HP CloudSystem Enterprise). Matrix 7.4 also supports creating KVM
virtual machines through use of HP Matrix KVM Private Cloud resource pools. Specifics of the
hypervisor hosts and VM guests required for those environments are documented separately.
•
For HP CloudSystem Foundation or next-generation HP CloudSystem Enterprise, see the
documentation at http://www.hp.com/go/CloudSystem/docs.
•
For HP Matrix KVM Private Cloud, see the HP Insight Management 7.3 Support Matrix at
http://www.hp.com/go/matrixoe/docs .
Table 52 Hypervisor hosts and VM guests
Insight Control
SIM
migr
perf
pwr1
srvr
prov2
virt
Matrix OE3
h/g
g
h/g
h/g
h/g
h/g6
h/g4, 6
Microsoft Windows Server 2012 with Hyper-V,
Standard and Datacenter Editions
h/g
g
h/g
h/g
h/g
h/g6
h/g4
h/g
g
g
h/g
h/g
h/g
h/g
h/g
g
h/g
h/g
h/g
h/g4
Microsoft Windows Server 2008 R2 SP1 with Hyper-V
h/g
g
h/g
h/g
h/g
h/g4
Microsoft Windows Server 2008 R2 SP1 Server Core
with Hyper-V
h/g
g
Microsoft Hyper-V Server 2012 R2
h/g
g6
h/g
h/g
Microsoft Hyper-V Server 2012, Standard and
Datacenter Editions
h/g
g
h/g
Microsoft Hyper-V Server 2008 R25
h/g
g
Microsoft Hyper-V Server 2008 R2 SP15
h/g
Hypervisor
Microsoft
Microsoft Windows Server 2008 SP2 with Hyper-V
5
5
5
h/g
4
h/g
h/g6
h/g4, 6
h/g
h/g
h/g4
h/g
h/g
h/g
h/g4
g
h/g
h/g
h/g
h/g4
h/g
g
g
h/g
h/g
h/g4
h/g
g
h/g
h/g
h/g
h/g
h/g
g
h/g
h/g
h/g
h/g
h/g
g
h/g
h/g
h/g
h/g
h/g
g
h/g
h/g
h/g
h/g
g
h/g
h/g
h/g
h/g
g
h/g
h/g
h/g9
h/g
g
h/g
h/g
h/g
h/g
g
h/g
h/g
h/g
h/g9
h/g
g
h/g
h/g
h/g
h/g
h/g
g
h/g
h/g
h/g
h/g9
VMware vSphere (ESXi) 5.1 Update2
h/g
g
h/g
h/g
h/g
h/g
Microsoft Hyper-V Server 2008 SP2
5
g7
VMware8
58
Table 52 Hypervisor hosts and VM guests (continued)
Insight Control
srvr
prov2
virt
Matrix OE3
h/g
h/g
h/g
h/g9
g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
Hypervisor
SIM
migr
perf
VMware vSphere (ESXi) 5.5
h/g
g
h/g
h/g
pwr1
Integrity VM
Integrity VM (with guests running a supported Integrity
Microsoft Windows (Itanium) OS)
h/g
h/g
Integrity VM (with guests running a supported Integrity
Linux (Itanium) OS)
h/g
h/g
Integrity VM (with guests running a supported HP-UX
OS)10
h/g
h/g
Xen on RHEL 5.4, x86
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
Xen on SLES 10 SP3, x86
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g
h/g11
Xen
KVM
KVM on RHEL 5.512
h/g
KVM on RHEL 5.612
h/g
12
KVM on RHEL 5.7
h/g
KVM on RHEL 5.8
h/g
KVM on RHEL 5.9
h/g
h/g
59
Table 52 Hypervisor hosts and VM guests (continued)
Insight Control
migr
srvr
prov2
SIM
KVM on RHEL 5.10
h/g
KVM on RHEL 6.112
h/g
KVM on RHEL 6.2
h/g
KVM on RHEL 6.3
h/g
KVM on RHEL 6.4
h/g
h/g
h/g
KVM on RHEL 6.5
h/g
h/g
h/g
KVM on RHEL 7
h/g
h/g
h/g
KVM on SLES 11 SP2
h/g
KVM on SLES 11 SP3
perf
pwr1
Hypervisor
virt
Matrix OE3
h/g
h/g
g
g
1
Support notations in this column apply only to the shutdown action of DCPC.
2
Insight Control server provisioning supports VM guest deployment for Linux and Windows OSes. However, Linux VM guest
deployment to Hyper-V VM host is not supported.
Matrix recovery management does not support failover of any Hypervisor hosts.
Matrix recovery management supports only VMware ESX VM guests, standalone Hyper-V VM guests, and clustered Microsoft
Hyper-V VM guests on a CSV. Hyper-V 2008 SP2 is not supported.
Matrix infrastructure orchestration supports provisioning a Linux VM on Hyper-V, but IO does not personalize the VM. After
provisioning, you must personalize the Linux VM. See the HP Matrix Operating Environment 7.3 Release Notes for information
about Enabling Matrix infrastructure orchestration provisioning support of Linux VMs on Hyper-V and Skipping automated OS
customization.
This hypervisor supports Windows 2012 Standard and Datacenter Editions as a guest with a patch downloaded from http://
support.microsoft.com/kb/2744129.
Insight Control server migration, SIM, Matrix infrastructure orchestration, Matrix OE visualization with logical server management,
and Insight Control virtual machine management support Generation 1 and Generation 2 VMs.
Insight Control server provisioning only supports Generation 1 VMs.
3
4
5
6
7
8
Installing any ESXi version in UEFI mode requires optimized mode to be enabled. Installing with optimized mode disabled is not
supported.
9
For Matrix infrastructure orchestration, full automation is possible with either the stateless Auto Deploy method or the 7.3 Update
2 support of Insight Control server provisioning and Operations Orchestration workflows. Customers can choose to manually install
and configure the hypervisor (or use Insight Control server provisioning and the enhanced server customization capabilities added
in 7.3 Update 1) and register it with vCenter and Insight Control virtual machine management.
10
Integrity HP VM B.06.30 (with patches) and the following patches are required to support Integrity/HP-UX cross-technology logical
server operations:
• For details see, the HP-UX vPars and Integrity VM V6.3 Release Notes at http://www.hp.com/go/hpux-hpvm-docs.
• Patch PHSS_43888 is required to deploy Matrix infrastructure orchestration services containing HP Integrity VM version 6.3
shared guests.
These patches are available at http://www.hp.com/go/hpsc.
11
For software requirements and restrictions, see Table 53 (page 61) .
12
Provides for the discovery or association of the host or guest on the CMS only.
HP Matrix infrastructure orchestration enables VMware vNetwork Distributed Switch (vDS) virtual
switches in an ESX data center to be used without any limitation. For more information, see the HP
Matrix Operating Environment Infrastructure Orchestration User Guide.
60
Table 53 (page 61) lists the Matrix OE software requirements and restrictions for Integrity virtual
machine VM hosts that are running a supported HP-UX OS. For more information, see the HP
Integrity Virtual Machines documentation:
http://www.hp.com/go/virtualization-manuals
Table 53 Matrix OE software requirements and restrictions for Integrity VM hosts running on HP-UX
Software requirements
Restrictions
HP-UX 11i v3 1403 with HPVM 6.3
VMware vNetwork Distributed Switch (vDS) and
Matrix recovery management does not support
Integrity Virtual Machines.
HP-UX 11i v3 1303 with HPVM 6.2
Matrix OE logical server capabilities are supported
on Integrity VM guests that are running only an HP-UX
OS.
On the 11i v3 VM host:
• PHSS_43888 1.0 HPVM B.06.30 CORE PATCH
Matrix infrastructure orchestration supports only HP-UX
11v3 guests.
• PHSS_43882 1.0 HPVM B.06.30 AVIO-HVSD PATCH
• PHSS_43883 1.0 HPVM B.06.30 AVIO-HSSN PATCH
On the 11i v3 VM guests:
• PHSS_43884 1.0 HPVM B.06.30 AVIO-IGSSN PATCH
NOTE: This patch is required for customers with HPVM 6.3 version.
This patch is not required for customers with HPVM B.06.2.
• PHSS_43885 1.0 HPVM B.06.30 vmGuestLib PATCH
• PHSS_43886 1.0 HPVM B.06.30 AVIO-GVSD PATCH
Logical Volume Manager (LVM) software:
Install LVM Version B.11.31.1010 from the HP Software Depot:
http://software.hp.com
To locate LVM, search for the keyword LVM.
HP recommends that you review the support matrices from your third-party hypervisor vendor to
verify their current list of supported operating systems.
Table 54 (page 62) lists the supported versions of Microsoft System Center Virtual Machine Manager
(SCVMM) and VMware vCenter Server on managed systems. SCVMM enables the migration of
Hyper-V virtual machines; VMware vCenter enables the migration of VMware virtual machines.
Insight Control virtual machine management requires ESX and Hyper-V hosts to be registered with
the vCenter server and SCVMM server respectively, in order to be fully functional for managing
that host. Likewise, Matrix OE requires hosts to be registered with Insight Control virtual machine
management (and in turn with a vCenter server or SCVMM) in order to fully manage the host and
guests and to deploy new guests. Note that, for Insight Control virtual machine management based
Hyper-V template for deployment or management, SCVMM registration is not required.
61
Table 54 Virtualization Management Environment software
Insight Control
Version
SIM
migr
perf1
pwr
srvr
prov
virt
Matrix OE
Microsoft
Microsoft System Center Virtual Machine Manager 2008 R2
SP1
✓
✓2
✓3
Microsoft System Center Virtual Machine Manager 2012
✓
✓2
✓3
Microsoft System Center Virtual Machine Manager 2012 SP1
✓
✓2
✓3
Microsoft System Center Virtual Machine Manager 2012 R2
✓
✓2
✓3
VMware
VMware vCenter Server v4.1 Update 2
✓
✓
✓
✓
VMware vCenter Server v4.1 Update 3
✓
✓
✓
✓
VMware vCenter Server 5.0 Update 1b
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
VMware vCenter Server 5.1b
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
VMware vCenter Server 5.5
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1
IC perf support does not apply to this software.
2
Insight Control virtual machine management supports only the deployment of templates through Microsoft System Center Virtual
Machine Manager.
Matrix Operating Environment supports VM provisioning using Microsoft System Center Virtual Machine Manager (SCVMM)
Hyper-V VM templates. For more information, see HP Matrix Operating Environment Infrastructure Orchestration User Guide.
3
Memory/CPU Hot Plug capabilities information
Some virtualization technologies support the ability to modify memory and CPU attributes, without
rebooting the VM. For example, enabling HotAddMemory and HotPlugCPU properties on virtual
machines. When supported by the virtualization technologies, these capabilities are enabled by
default for VMs created by Matrix infrastructure orchestration or by Matrix OE visualization. The
steps required for the guest OS to recognize such changes are dependent on the operating system
used and also on the hypervisor used. The GUI, CLI, and API forms of this operation provides an
option to cancel the request, if the hypervisor requires a reboot. The GUI defaults to a selected
check box to avoid the reboot, which you can clear to allow the reboot. The API and CLI continue
to perform the reboot by default. However, as an administrator, you can specify new options to
avoid the reboot. For more information, see HP Matrix Operating Environment Infrastructure
Orchestration User Guide at http://www.hp.com/go/matrixoe/docs.
VMware vCenter limitations for Memory/CPU Hot Plug capabilities
The VMware vCenter GUI does not allow you to enable the Memory and CPU Hot Plug capabilities
for those ESXi VMs that are in a powered on state. However, Insight Control virtual machine
62
management supports enabling and disabling the Memory and CPU Hot Plug capabilities, regardless
of the power state of the VM.
Table 55 (page 63) describes the limitations of the guest OS compatibility of the Memory and CPU
Hot Plug capabilities option in vCenter.
Table 55 VMware vCenter guest OS compatibility of the Memory/CPU Hot Plug capabilities option in vCenter
Guest OS
Available
CentOS 4/5/6 (32-bit and 64-bit)
✓
Debian GNU/Linux (4, 5, 6)
✓
Unavailable
Novell Netware 5.1 and 6.x
✓
Novell Open Enterprise Server
✓
Novell SUSE Linux Enterprise 8 and 9
(32-bit and 64-bit)
✓
Novell SUSE Linux Enterprise 10 (32-bit)
✓
Novell SUSE Linux Enterprise 10 (64-bit)1
✓
Novell SUSE Linux Enterprise 11 (32-bit
and 64-bit)
✓
Oracle Linux 4/5/6 (32-bit and 64-bit)
✓
Oracle Solaris 10 (32-bit and 64-bit)
✓
Oracle Solaris 11 (64-bit)
✓
✓
Red Hat Enterprise Linux 3 and 4 (32-bit
and 64-bit)
✓
Red Hat Enterprise Linux 5 (32-bit)
✓
Red Hat Enterprise Linux 6 (64-bit)
✓
Red Hat Enterprise Linux 6 (32-bit and
64-bit)
✓
Ubuntu Linux (32-bit)1
✓
Ubuntu Linux (64-bit)
✓
Windows 7 (32-bit and 64-bit)
✓
Windows 8 (32-bit and 64-bit)
✓
Windows 8 Server (64-bit)
✓
Windows Server 2003 (32-bit and
64-bit)1
✓
Windows Server 2003 Data Center
(32-bit and 64-bit)1
✓
✓
Windows Server 2003 Standard (32-bit
and 64-bit)
Windows Server 2008 (64-bit)1
✓
Windows Server 2008 (64-bit)
✓
Windows Server 2008 R2 (64-bit)
✓
Windows Server Web Edition 2003
✓
Memory/CPU Hot Plug capabilities information
63
Table 55 VMware vCenter guest OS compatibility of the Memory/CPU Hot Plug capabilities option in vCenter
(continued)
Guest OS
Available
Unavailable
✓
Windows Vista (32-bit and 64-bit)
✓
1
64
Enable option is grayed out. Hence, cannot enable in Virtual Center. Insight Control virtual machine management can either enable
or disable.
7 Managed systems agents and providers
Agents and providers bundled with Matrix OE
Table 56 (page 65) lists the agents and providers that are bundled with Matrix OE.
NOTES:
•
Agents and providers for OpenVMS 8.3-1H1 are available by web release. Agents and
providers for OpenVMS 8.4 are provided as part of the OpenVMS V8.4 Operating
Environment DVD. For more information, see “Agents and providers for OpenVMS managed
systems” (page 66).
•
For proper discovery of Integrity SuperDome2 systems, the Virtual Partition bundle must be
installed.
Table 56 Agents and providers bundled with Matrix OE
Operating
system
Architecture
Matrix OE 7.4.x version
Application Discovery Agent
HP-UX
HP-UX 11i v2 and v3
7.4
gWLM Agent
HP-UX
HP-UX 11i v2 and v3
7.4
HPVM Guest Lib and Provider
6.2
HP-UX
HP-UX 11i v3
B.06.20
HPVM Guest Lib and Provider
6.3
HP-UX
HP-UX 11i v3
B.06.30
JRE
HP-UX
HP-UX 11i v2 and v3
1.7
nPartition Provider
HP-UX
HP-UX 11i v1
B.12.02.07.03
nPartition Provider
HP-UX
HP-UX 11i v2
B.23.01.07.05
nPartition Provider
HP-UX
HP-UX 11i v3
B.31.02.01
nPartition Provider
HP-UX
HP-UX 11iv3
B.31.02.04
nPartition Provider
HP-UX
HP-UX 11iv3
B.11.31.01.06
Utilization Provider
HP-UX
HP-UX 11i v2 and v3
A.01.08.09.00
vPar Provider
HP-UX
HP-UX 11i v1
B.11.11.01.06
vPar Provider
HP-UX
HP-UX 11i v2
B.11.23.01.07
vPar Provider
HP-UX
HP-UX 11i v3
B.11.31.01.05
vseassist
HP-UX
HP-UX 11i v2 and v3
7.4
WBEM Services
HP-UX
HP-UX 11i v1
A.02.07.06
WBEM Services
HP-UX
HP-UX 11i v2
A.02.09.14
WBEM Services
HP-UX
11iv3
A.02.11.04
Agent
HP-UX agents and providers
Microsoft Windows agents and providers
HPVM Provider
Microsoft
Windows
HP Integrity
4.1.0.2
nPartition Commands
Microsoft
Windows
HP Integrity
2.1.3.1
65
Table 56 Agents and providers bundled with Matrix OE (continued)
Operating
system
Agent
Architecture
Matrix OE 7.4.x version
nPartition Provider
Microsoft
Windows
HP Integrity
2.1.3.2
Utilization Provider1
Microsoft
Windows
HP Integrity
1.8.5.2
vseassist
Microsoft
Windows
HP ProLiant and non-HP x86
7.4
Microsoft
Windows
HP Integrity
7.4
Application Discovery Provider
Linux
Red Hat Enterprise Linux 5 (HP Integrity)
7.1.0
Application Discovery Provider
Linux
SUSE Linux Enterprise Server 10 (HP Integrity)
7.1.0
HPVM Guest kit and Provider
Linux
4.0.1-2
HPVM Guest kit and Provider
Linux
4.1.0-1
nPartition Commands
Linux
1.03.00-1
nPartition Commands
Linux
1.03.00-1
nPartition Provider
Linux
1.07.01-1
nPartition Provider
Linux
1.07.01-1
vseassist
Linux
Red Hat Enterprise Linux 5 (HP ProLiant and
non-HP x86)
7.3.2
WMI Mapper
HP Integrity
Linux agents and providers
Red Hat Enterprise Linux 6 (HP ProLiant and
non-HP x86)
SUSE Linux Enterprise Server 10 (HP ProLiant
and non-HP x86)
SUSE Linux Enterprise Server 11 (HP ProLiant
and non-HP x86)
1
The Utilization Provider for Microsoft Windows is only installed to Integrity Windows managed systems from an HP-UX CMS. Data
collection on a Windows CMS is agentless for all Windows managed systems.
Agents and providers for OpenVMS managed systems
Matrix OE supports using Insight Virtualization Manager, Capacity Advisor, and Global Workload
Manager with HP OpenVMS 8.3-1H1 and 8.4 systems managed from a Microsoft Windows CMS.
The following agents and providers are required and are available for download from HP.
NOTE: The OpenVMS agents and providers are not bundled with Matrix Operating Environment,
and the agent distributor does not install them on managed systems. You must download and install
these agents and providers when you are using Matrix Operating Environment to manage OpenVMS
systems from a Microsoft Windows CMS.
•
OpenVMS WBEM Services and WBEM Providers
Insight Virtualization Manager and Capacity Advisor require the installation of HP WBEM
Services and HP WBEM Provider to collect data from OpenVMS systems.
For information on supported versions of HP WBEM Services and HP WBEM Providers, see
the following website:
http://h71000.www7.hp.com/openvms/products/insight_software/index.html
66
Managed systems agents and providers
You can download these WBEM kits and related documentation from the HP Web-Based
Enterprise Management (WBEM) services link at the following website:
http://www.hp.com/products/openvms/systemmanagement
For the list of supported HP Integrity servers, see the OpenVMS WBEM Providers release notes.
•
OpenVMS gWLM Agent
Global Workload Manager requires the installation of OpenVMS gWLM Agent 4.1 on
OpenVMS 8.3-1H1 and 8.4 managed systems. You can download the OpenVMS gWLM
Agent 4.1 kit and documentation from the following website:
http://h71000.www7.hp.com/openvms/integrity/integrity_gwlm.html
67
8 Support and other resources
Information to collect before contacting HP
Be sure to have the following information available before you contact HP:
•
Software product name
•
Hardware product model number
•
Operating system type and version
•
Applicable error message
•
Third-party hardware or software
•
Technical support registration number (if applicable)
How to contact HP
Use the following methods to contact HP:
•
In the United States, see the Customer Service / Contact HP United States website for contact
options:
http://welcome.hp.com/country/us/en/contact_us.html
•
In the United States, call 1-800-HP-INVENT (1-800-474-6836) to contact HP by telephone.
This service is available 24 hours a day, 7 days a week. For continuous quality improvement,
conversations might be recorded or monitored.
HP Support Center
•
In other locations, see the Contact HP Worldwide website for contact options:
http://welcome.hp.com/country/us/en/wwcontact.html
Security bulletin and alert policy for non-HP owned software components
Open source software (such as OpenSSL) or third-party software (such as Java) are sometimes
included in HP products. HP discloses that the non-HP owned software components listed in the
Insight Management end user license agreement (EULA) are included with Insight Management. .
The EULA is included with the Insight Management patch framework.
HP addresses security bulletins for the software components listed in the EULA with the same level
of support afforded HP products. HP is committed to reducing security defects and helping you
mitigate the risks associated with security defects when they do occur.
When a security defect is found, HP has a well-defined process that culminates with the publication
of a security bulletin. The security bulletin provides you with a high level description of the problem
and explains how to mitigate the security defect.
Subscription service
HP recommends that you register your product at the Subscriber's Choice for Business website:
http://www.hp.com/country/us/en/contact_us.html
After registering, you will receive e-mail notification of product enhancements, new driver versions,
firmware updates, and other product resources.
Registering for software technical support and update service
Insight Management includes one year of 24 x 7 HP Software Technical Support and Update
Service. This service provides access to HP technical resources for assistance in resolving software
implementation or operations problems.
68
Support and other resources
The service also provides access to software updates and reference manuals in electronic form as
they are made available from HP.
With this service, Insight Management customers benefit from expedited problem resolution as
well as proactive notification and delivery of software updates. For more information about this
service, see the following website:
http://www.hp.com/services/insight
Registration for this service takes place following online redemption of the license certificate.
How to use your software technical support and update service
After you have registered, you will receive a service contract in the mail containing the Customer
Service phone number and your Service Agreement Identifier (SAID). You need your SAID when
you contact technical support and when visiting the Software Updates and Licensing portal.
As HP releases updates to software, the latest versions of the software and documentation are
made available to you. The Software Updates and Licensing portal gives you access to software,
documentation and license updates for products on your HP software support agreement.
You can access this portal from the HP Support Center:
HP Support Center
After creating your profile and linking your support agreements to your profile, see the Software
Updates and Licensing portal at http://www.hp.com/go/hpsoftwareupdatesupport to obtain
software, documentation, and license updates.
HP authorized resellers
For the name of the nearest HP authorized reseller, see the following sources:
•
In the United States, see the HP U.S. service locator website:
http://www.hp.com/service_locator
•
In other locations, see the Contact HP worldwide website:
http://welcome.hp.com/country/us/en/wwcontact.html
New and changed information in this edition
•
The chapter “Managed system hardware and firmware requirements” in previous versions of
this document was separated into two separate chapters, “Managed systems hardware ”
(page 27) and “Managed system firmware ” (page 46).
•
There is a new section in “Managed systems hardware ” (page 27) specifically for “Supported
storage products” (page 37).
•
Many tables in this document now incorporate “subheadings” to organize entries by editions
or manufacturers.
Related information
•
Hardware and software requirements for other related HP products:
◦
See separate Management Pack user guides for support information, which is available
from the HP Enterprise Information Library:
◦
The HP OneView for VMware vCenter User Guide lists hardware and software
requirements, and it is available at the HP Enterprise Information Library:
HP authorized resellers
69
◦
The HP iLO QuickSpecs contain support information and are available from the iLO
product website:
http://www.hp.com/go/ilo
•
HP ProLiant servers:
◦
ProLiant BL BladeSystem servers:
http://www.hp.com/go/blades
◦
ProLiant DL series rack mount servers:
http://www.hp.com/servers/dl
◦
ProLiant ML series tower servers:
http://www.hp.com/servers/ml
◦
ProLiant SL series scalable system servers:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF02a/15351-15351-3896136.html
•
HP Integrity servers: http://www.hp.com/go/integrity
•
HP NonStop servers: http://www.hp.com/go/nonstop
Typographic conventions
This document uses the following typographical conventions:
Book title
The title of a book. On the web, this can be a hyperlink to the
book itself.
70
Command
A command name or command phrase, for example ls -a.
Computer output
Information displayed by the computer.
ENVIRONMENT VARIABLE
The name of an environment variable, for example, PATH.
Term
A term or phrase that is defined in the body text of the document,
not in a glossary.
User input
Indicates commands and text that you type exactly as shown.
Replaceable
The name of a placeholder that you replace with an actual value.
...
Indicates that the preceding element can be repeated one or more
times.
IMPORTANT
An alert that calls attention to essential information.
NOTE
An alert that contains additional or supplementary information.
Support and other resources
9 Documentation feedback
HP is committed to providing documentation that meets your needs. To help us improve the
documentation, send any errors, suggestions, or comments to Documentation Feedback
([email protected]). Include the document title and part number, version number, or the URL
when submitting your feedback.
71
A Hardware requirements and supported capabilities for
This appendix describes the support requirements for Insight Control power management. The
minimum firmware versions listed in this appendix apply only to power management. For firmware
requirements that apply to the entire Insight Management stack, see “Managed system firmware
” (page 46).
The license redemption process for Insight Control generates separate license keys for all Insight
Control capabilities, including power management, and generates the license keys for HP iLO
Advanced and iLO Advanced for BladeSystem. To use Insight Control power management, you
must apply an iLO Advanced license key to the server.
Power management capabilities
Insight Control power management provides the following power management capabilities:
•
Power Regulator enables dynamic or static changes in CPU performance and power states.
In dynamic mode, Power Regulator automatically adjusts the processor power usage and
performance of a server to match CPU application activity. It improves server energy efficiency
by giving CPUs full power for applications when they need it and enabling power savings
without performance degradation when application activity is reduced. For more information,
see the Power Regulator website:
http://www.hp.com/servers/power-regulator
•
Dynamic Power Capping reclaims trapped power and cooling capacity by safely limiting peak
power consumption of servers.
•
Data Center Thermal Mapping aggregates the data from thermal sensors in the servers and
draws a thermal map of the room.
•
Power Metering provides real-time measurements of actual power consumption so you can
find and fix inefficiencies.
•
Calibrated Maximum Power provides calibrated maximum power to enable power planning
based on accurately measured peak potential power for each device instead of estimates.
•
Data Center Power Control protects critical loads by reducing power to noncritical servers
during cooling system failures. The features of Data Center Power Control available on the
hardware are subject to the capabilities of the operating systems that are listed in Table 52
(page 58).
•
Intelligent Power Discovery automatically detects the PDU and outlet that a server is plugged
into.
Server requirements and supported capabilities for Insight Control power
management
This section lists the servers on which power management is available as well as the power
management requirements and supported power management capabilities. Support for specific
power management capabilities varies by server model.
72
Hardware requirements and supported capabilities for Insight Control power management
Table 57 Requirements and capabilities for HP ProLiant BL servers
Server
model
Minimum
iLO or OA
firmware
version
4
ProLiant
BL2x220
G5
Data
Center
Thermal
Mapping
Power
Metering
✓
✓5
✓
✓
✓
✓
Minimum system
Power
BIOS version
Regulator
8/5/2008
Data
Intelligent
Calibrated Center
Power
Power
Maximum
Control1,2 Discovery3
Power
Dynamic
Power
Capping
ProLiant
BL2x220c
G6
iLO 2
I24 8/15/2009
version 1.79
or later
✓
✓
✓
✓
✓
✓
ProLiant
BL2x220c
G7
Any version
✓
✓
✓
✓
✓
✓
ProLiant
BL260c
iLO 2
2/14/2008
version 1.30
or later
✓
✓5
✓
✓
✓
✓
✓
✓5
✓
✓
✓
✓
4
ProLiant
BL260c G5
I29 3/8/2010
8/5/2008
ProLiant
BL280c G6
iLO 2
I22 1/27/2009
version 1.79
or later
✓
✓5
✓
✓
✓
✓
ProLiant
BL420c
Gen8
iLO 4
version 1.01
or later
✓
✓
✓
✓
✓
✓
ProLiant
BL460c
✓4
8/5/2008
✓
✓5
✓
✓
✓
✓
ProLiant
BL460c G5
✓4
8/5/2008
✓
✓5
✓
✓
✓
✓
ProLiant
BL460c G6
iLO 2
I24 8/15/2009
version 1.79
or later
✓
✓5
✓
✓
✓
✓
ProLiant
BL460c G7
iLO 3
✓
✓5
✓
✓
✓
✓
ProLiant
BL460c
Gen8
iLO 4
version 1.01
or later and
OA version
3.50
✓
✓
✓
✓
✓
✓
ProLiant
BL460c
Gen8 (with
Intel EP v2
Xeon
processor)
iLO 4
I31
version 1.30 08/26/2013
or later
✓
✓
✓
✓
✓
✓
ProLiant
BL460c
Gen9
iLO 4
i36
version 2.00 06/10/2014
or later
✓
✓
✓
✓
✓
✓
ProLiant
BL465c
iLO 2
11/18/2007
version 1.30
or later
✓7
✓
✓
✓
✓
✓
✓
✓
✓
ProLiant
BL465c G5
✓4
I27 5/10/2010
8/5/2008
6
✓
✓5
Server requirements and supported capabilities for Insight Control power management
73
Table 57 Requirements and capabilities for HP ProLiant BL servers (continued)
Server
model
Minimum
iLO or OA
firmware
version
Minimum system
Power
BIOS version
Regulator
Dynamic
Power
Capping
Data
Center
Thermal
Mapping
Power
Metering
Data
Intelligent
Calibrated Center
Power
Power
Maximum
Power
ProLiant
BL465c G6
iLO 2
Any version
version 1.79
or later
✓
✓5
✓
✓
✓
✓
ProLiant
BL465c G7
(AMD
Opteron
6100)
iLO 3
None
version 1.05
✓
✓
✓
✓
✓
✓
ProLiant
BL465c G7
(AMD
Opteron
6200)
iLO 3
None
version 1.05
✓
✓
✓
✓
✓
✓
ProLiant
BL465c
Gen8
iLO 4
version 1.01
or later
✓
✓
✓
✓
✓
✓
ProLiant
BL480c
iLO 2
2/24/2008
version 1.30
or later
✓
✓5
✓
✓
✓
✓
ProLiant
BL490c G6
iLO 2
I21 8/14/2009
version 1.79
or later
✓
✓5
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
8/5/2008
✓
✓5
✓
✓
✓
✓
ProLiant
BL495c G6
iLO 2
Any version
version 1.79
or later
✓
✓5
✓
✓
✓
✓
ProLiant
BL620c G7
iLO 3
I25 7/9/2010
✓
✓
✓
✓
✓
✓
ProLiant
BL660c
Gen8
iLO 4
version 1.10
or later
I32
05/02/2012
✓
✓
✓
✓
✓
✓
ProLiant
BL680c G5
iLO 2
10/18/2007
version 1.35
or later
✓
✓5
✓
✓
✓
✓
ProLiant
BL680c G7
Any version
✓
✓
✓
✓
✓
✓
ProLiant
BL685c G1
iLO 2
11/17/2007
version 1.30
or later
✓7
✓
✓
ProLiant
BL685 G5
iLO 2
1/29/09
version 1.30
or later
✓
✓5
✓
✓
✓
✓
ProLiant
BL685c G6
iLO 2
A17 5/7/2009
version 1.79
or later
✓
✓5
✓
✓
✓
✓
ProLiant
BL490c G7
4
ProLiant
BL495c G5
74
I25 6/4/2010
✓
✓
✓
Table 57 Requirements and capabilities for HP ProLiant BL servers (continued)
Server
model
Minimum
iLO or OA
firmware
version
Minimum system
Power
BIOS version
Regulator
Dynamic
Power
Capping
Data
Center
Thermal
Mapping
Power
Metering
Data
Intelligent
Calibrated Center
Power
Power
Maximum
Power
ProLiant
BL685c G7
(AMD
Opteron
6100)
iLO 3
None
version 1.05
and OA
version 3.10
✓
✓
✓
✓
✓
✓
ProLiant
BL685c G7
(AMD
Opteron
6200)
iLO 3
None
version 1.05
and OA
version 3.10
✓
✓
✓
✓
✓
✓
ProLiant
BL685c G7
(AMD
Opteron
6300)
iLO 3
None
version 1.05
and OA
version 3.10
✓
✓
✓
✓
✓
✓
1
2
3
4
5
6
7
Data Center Power Control works only on Primary Addresses of a system and cannot detect a system with a non-primary address.
If a system has IPv4 as a primary address and IPv6 as a non-primary address, Data Center Power Control only works with the IPv4
address.
For VMhost with only an IPv6 address. Data Center Power Control cannot perform a graceful shutdown of guests. It will only
shutdown the hosts.
The Intelligent Power discovery feature is not supported when iPDU is configured with IPv6 addresses only.
For Enclosure Dynamic Power Capping, iLO 2 version 1.70 or later. Otherwise, iLO 2 version 2 1.30 or later.
For Enclosure Dynamic Power Capping, OA 2.30 or later. Otherwise, OA 1.30 or later.
When you are implementing power capping for HP BladeSystem, HP recommends that you use Enclosure Dynamic Power Capping
set through the Onboard Administrator or Insight Control power management user interface. To use Enclosure Dynamic Power
Capping, you must upgrade your iLO 2 firmware to version 1.70 or later and iLO 3 to version 1.0 or later. HP recommends that
you update your system ROM to version 10/1/2008 or later for iLO 2, and May 2010 or later for iLO 3 for G7 servers. For some
older BL460c servers, the iLO 2 firmware might not be able to automatically update the Dynamic Power Capping hardware circuit.
In these instances, the Onboard Administrator will compensate for the absence of the internal hardware circuit and continue to
guarantee circuit protection.
Temperature related information or this feature is supported with iLO4 v2.02 and later versions.
This server model does not support HP Dynamic Power Savings mode.
Table 58 Requirements and capabilities for HP ProLiant workstation blades
Server
model
ProLiant
xw2x220c
Minimum
iLO or OA
firmware
version
Minimum system
Power
BIOS version
Regulator
iLO 2
8/5/2008
version 1.60
or later.
Dynamic
Power
Capping
Data
Center
Thermal
Power
Mapping Metering
Data
Intelligent
Calibrated Center
Power
Power
Maximum
Power
✓
✓4
✓
✓
✓
✓
OA version
2.30 or
later.
ProLiant
xw460c
iLO 2
7/31/2007
version 1.30
or later
✓
✓5
✓
✓
✓
✓
ProLiant
WS460c
G6
iLO 2
7/31/2007
version 1.30
or later
✓
✓
✓
✓
✓
✓
75
Table 58 Requirements and capabilities for HP ProLiant workstation blades (continued)
Server
model
ProLiant
WS460c
Gen8
iLO 4
version 1.10
or later
I31
05/23/2012
✓
✓
✓
✓
✓
✓
ProLiant
WS460c
Gen8 (with
Intel EP v2
Xeon
processor)
iLO 4
I31
version 1.30 08/26/2013
or later
✓
✓
✓
✓
✓
✓
1
2
3
4
5
Minimum system
Power
BIOS version
Regulator
Dynamic
Power
Capping
Data
Center
Thermal
Power
Mapping Metering
Data
Intelligent
Calibrated Center
Power
Power
Maximum
Power
Minimum
iLO or OA
firmware
version
address.
shutdown the hosts.
This server supports only Power Capping. It does not support Dynamic Power Capping.
When you are implementing power capping for HP BladeSystems, HP recommends that you use Enclosure Dynamic Power Capping
set through the Onboard Administrator or Insight Control power management user interface. To use Enclosure Dynamic Power
Capping, you must upgrade your iLO 2 firmware to version 1.70 or later and iLO 3 to version 1.0 or later. HP recommends that
you update your system ROM to version 10/1/2008 or later for iLO 2, and May 2010 or later for iLO 3 for G7 servers. For some
older BL460c servers, the iLO 2 firmware might not be able to automatically update the Dynamic Power Capping hardware circuit.
In these instances, the Onboard Administrator will compensate for the absence of the internal hardware circuit and continue to
guarantee circuit protection.
Table 59 Requirements and capabilities for HP ProLiant DL servers
Data
Calibrated Center Intelligent
Power
Maximum Power
Power
Power
Regulator
Dynamic
Power
Capping
Data
Center
Thermal
Mapping
Power
Metering
✓
✓
✓
✓
✓
✓
✓
✓5
✓
✓
✓
✓
8/5/2008
✓
✓
✓
✓
✓
✓
ProLiant
DL360 G6
iLO 2 version P64
1.79 or later 8/2/2009
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL360 G7
iLO 3 version 4/1/2010
1.0 or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL360
Gen8 (with
Intel EP v2
Xeon
processor)
iLO 4 version P71
1.30 or later 08/28/2013
✓
✓
✓
✓
✓
✓
✓
Minimum iLO
firmware
version
Minimum
system BIOS
version
ProLiant
DL320 G64
None
None
ProLiant
DL360 G5
1.30 or later
Server
model
ProLiant
DL360 G5
(with Quad
Core
“G-step”
system
board)
76
6
Table 59 Requirements and capabilities for HP ProLiant DL servers (continued)
Server
model
Minimum iLO
firmware
version
Minimum
system BIOS
version
Power
Regulator
Dynamic
Power
Capping
Data
Center
Thermal
Mapping
Power
Metering
Data
Power
Maximum Power
Power
ProLiant
DL360e
Gen8
iLO 4 version
1.01 or later
✓
✓
✓
✓
✓
✓
ProLiant
DL360p
Gen8
iLO 4 version
1.01 or later
✓
✓
✓
✓
✓
✓
ProLiant
DL360p
Gen8 SE
iLO 4 version P71
1.30 or later 08/26/2013
✓
✓
✓
✓
✓
✓
ProLiant
DL360
Gen9
iLO 4 version p8906/16/2014
2.00 or later
✓
✓
✓
✓
✓
✓
ProLiant
DL365 G1
1.20 or later
✓8
ProLiant
DL365 G5
1.30 or later
✓
ProLiant
DL370 G6
iLO 2 version P63
1.75
1/27/2009
ProLiant
DL380 G5
1.70 or 2.30
✓
7
✓
✓
✓5
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓5
✓
✓
✓
✓
8/5/2008
✓
✓
✓
✓
✓
✓
ProLiant
DL380 G6
iLO 2 version P62
1.79 or later 8/2/2009
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL380 G7
1.0 or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL380e
Gen8
iLO 4 version
1.01 or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL380p
Gen8
iLO 4 version
1.0 or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL380p
Gen8 (with
Intel EP v2
Xeon
processor)
iLO 4 version P70
1.30 or later 08/28/2013
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL380
Gen9
iLO 4 version p8907/11/2014
2.00 or later
✓
✓
✓
✓
✓
✓
HP ProLiant
DL380z
iLO4 1.0 and
later version
ProLiant
DL380 G5
(with Quad
Core
“G-step”
system
board)
6
✓
✓
7
✓
✓
✓
✓
✓
✓
✓
77
Table 59 Requirements and capabilities for HP ProLiant DL servers (continued)
Server
model
Minimum iLO
firmware
version
Minimum
system BIOS
version
Power
Regulator
Dynamic
Power
Capping
Data
Center
Thermal
Mapping
Power
Metering
Data
Power
Maximum Power
Power
✓
✓
✓
ProLiant
DL385 G2
1.20 or later
✓8
ProLiant
DL385 G5
1.30 or later
✓
✓5
✓
✓
✓
✓
ProLiant
DL385 G5p 1.30 or later
✓
✓5
✓
✓
✓
✓
ProLiant
DL385 G7
(AMD
Opteron
6100)
1.0 or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL385 G7
(AMD
Opteron
6200)
1.0 or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL385p
Gen8
iLO 4 version
1.01 or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL560
Gen8
iLO 4 version P77
1.10 or later
03/29/2012
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL580 G7
iLO 3 version A16
1.07 or later 4/16/2010
✓
✓
✓
✓
ProLiant
DL580
Gen8 9
iLO 4 version P79
1.40
11/01/2013
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL585 G7
(AMD
Opteron
6100)
iLO 3 version A16
1.0 or later
4/1/2010
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL585 G7
(AMD
Opteron
6200)
iLO 3 version A16
1.0 or later
4/1/2010
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL585 G7
(AMD
Opteron
6300)
iLO 3 version A16
1.50 or later 6/12/2012
✓
✓
✓
✓
✓
✓
✓
ProLiant
DL980 G7
iLO 3 version
1.50 or later
✓
✓
✓
✓
✓
✓
✓
1
2
3
78
address.
shutdown the hosts.
4
5
6
7
8
9
This server supports only power/thermal monitoring and capping with certain power-supply options. For detailed requirements,
see the server QuickSpecs.
For Dynamic Power Capping, iLO 2 version 1.70 or later. Otherwise, iLO 2 version 1.30 or later.
This server model does not support HP Dynamic Power Savings mode.
To verify that the DL580 Gen8 supports a specific OS, see the following websites:
• Support information at http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/
resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&
javax.portlet.begCacheTok=com.vignette.cachetoken&
spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c04083171-1%257CdocLocale%253D&
javax.portlet.endCacheTok=com.vignette.cachetoken
• UEFI technical white paper at http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA5-1111ENW&cc=us&
lc=en
Table 60 Requirements and capabilities for HP ProLiant ML servers
Server
model
Minimum
iLO
firmware
version
Minimum system
Power
BIOS version
Regulator
✓
ProLiant
ML110 G7
None
None
ProLiant
ML310e
Gen8
iLO 4
version 1.10
or later
J04
05/26/2012
ProLiant
None
ML330 G65
None
Dynamic
Power
Capping
4
Data
Center
Thermal
Power
Mapping Metering
✓
✓
Data
Intelligent
Calibrated Center
Power
Power
Maximum
Power
✓
✓
✓
✓
✓
✓
✓
✓
✓
ProLiant
ML350 G5
iLO 2
5/1/2007
version 1.30
or later
✓
✓6
✓
✓
✓
✓
ProLiant
ML350 G6
iLO 2
D22
version 1.79 2/23/2009
or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
ML350e
Gen8
iLO 4
version 1.01
or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
ML350e
Gen8 V2
iLO 4
07/04/2013
version 1.30
✓
✓
✓
✓
✓
✓
✓
ProLiant
ML350p
Gen8
iLO 4
version 1.01
or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
ML350p
Gen8 (with
Intel EP v2
Xeon
processor)
iLO 4
P72
version 1.30 08/26/2013
or later
✓
✓
✓
✓
✓
✓
✓
ProLiant
ML350
Gen9
ILO4 version p92
2.02 or later 07/11/2014
✓
✓
✓
✓
✓
✓
7
79
Table 60 Requirements and capabilities for HP ProLiant ML servers (continued)
Server
model
Minimum
iLO
firmware
version
Minimum system
Power
BIOS version
Regulator
Dynamic
Power
Capping
ProLiant
ML370 G5
iLO 2
5/1/2007
version 1.30
or later
✓
✓6
ProLiant
ML370 G6
iLO 2
P63
version 1.79 6/20/2009
or later
✓
✓
1
2
3
4
5
6
7
Data
Center
Thermal
Power
Mapping Metering
✓
Data
Intelligent
Calibrated Center
Power
Power
Maximum
Power
✓
✓
✓
✓
✓
✓
✓
address.
shutdown the hosts.
The Intelligent Power discovery feature is not supported when iPDU is configured with IPv6 addresses only
You can purchase the RPS option to enable Dynamic Power Capping on this server.
This server supports only power/thermal monitoring and capping with certain power-supply options. For detailed requirements,
see the server QuickSpecs.
Temperature related information or this feature is supported with iLO4 v2.02 and later versions
Table 61 Requirements and capabilities for HP ProLiant SL servers
Server model1
ProLiant
SL230s
Minimum
iLO
firmware
version
iLO 4
version
1.30 or
later
Minimum
system BIOS
version
P75
08/28/2013
iLO 4
version
1.30 or
later
✓
✓
ProLiant
iLO 4
SL230s Gen8 version
1.01
ProLiant
SL250s
Data
Data
Dynamic Center
Power
Power
Power
Power Thermal Power Maximum Power
Topology Regulator Capping Mapping Metering
Power
P75
08/28/2013
✓
✓
ProLiant
iLO 4
SL250s Gen8 version
1.01
ProLiant
SL270 Gen8
iLO 4
version
1.10 or
later
P75
05/11/2012
✓
ProLiant
SL270s
iLO 4
version
1.30 or
later
P75
08/26/2013
✓
ProLiant
SL2500
Gen8 Plus 2U
multi-node
iLO 4
version
1.30 or
later
P83
08/28/2013
✓
80
✓
Table 61 Requirements and capabilities for HP ProLiant SL servers (continued)
Server model1
Minimum
iLO
firmware
version
Data
Data
Dynamic Center
Power
Power
Power
Power Thermal Power Maximum Power
Topology Regulator Capping Mapping Metering
Power
Minimum
system BIOS
version
ProLiant
SL4540
Gen8
ILO4
version
1.30 or
later
P74
01/20/2013
✓
ProLiant
SL4540
Gen8
HyperStorage
System
iLO 4
version
1.10 or
later
P74
08/12/2012
✓
ProLiant
iLO 3
SL4545 G7
version
HyperStorage 1.50
System 5
A31
06/15/2012
✓
1
2
3
4
5
✓
✓
✓
✓
✓
✓
Associating chassis nodes on SL series servers is not supported.
address.
shutdown the hosts.
This server does not support core capability.
Table 62 Requirements and capabilities for HP ProLiant XL servers
Server
model
ProLiant XL
230a
Gen9
Minimum
iLO
firmware
version
iLO 4
version
2.00 or
later
HP ProLiant iLO4 1.40
XL220a
and later
Gen8 v2
version
1
2
3
4
Minimum
system BIOS
version
Power
Topology
P89
✓
06/16/2014
P94
10/25/2013
Power
Regulator
✓
Dynamic
Power
Capping
Data
Data
Center
Power
Thermal
Power
Maximum Power
1,2
3
Mapping Metering Power Control Discovery
✓
✓
✓
✓
4
✓
address.
shutdown the hosts.
81
Table 63 Requirements and capabilities for HP Integrity servers
Server
model
Minimum
iLO or OA
firmware
version
Minimum system
Power
BIOS version1 Regulator
Integrity
BL860c
iLO 2
version T
02.05 or
later
N/A
✓5
Integrity
BL860c i2
None
None
✓6
Integrity
BL860c i4
None
None
✓8
Integrity
BL870c
iLO 2
version T
02.05 or
later
N/A
✓5
Integrity
BL870c i2
None
None
✓6
Integrity
BL870c i4
None
None
Integrity
BL890c i2
None
Integrity
BL890c i4
Dynamic
Power
Capping
Data
Center
Thermal
Power
Mapping Metering
Data
Intelligent
Calibrated Center
Power
Power
Maximum
Power
✓
✓
✓6
✓
✓
✓
✓7
✓6
✓
✓
✓
✓7
✓
✓
✓6
✓
✓
✓
✓7
✓8
✓6
✓
✓
✓
✓7
None
✓6
✓6
✓
✓
✓
✓7
None
None
✓8
✓6
✓
✓
✓
✓7
Integrity
rx2660
iLO 2
version F
02.05 or
later
N/A
✓5
✓
✓
Integrity
rx2800 i2
None
None
✓6
✓6
✓
✓
✓
✓7
Integrity
rx2800 i4
iLO 3
version
53.30.32
N/A
✓
✓
✓
✓
✓
✓
Integrity
rx2900 i4
iLO 3
version
53.30.32
N/A
✓
✓
✓
✓
✓
✓
Integrity
rx3600
iLO 2
version F
02.05 or
later
N/A
✓5
✓
✓
✓
Integrity
rx6600
iLO 2
version F
02.05 or
later
N/A
✓5
✓
✓
✓
Integrity
Superdome
2
iLO 2
version F
03.29 or
later
✓
✓
✓
✓
✓9
Integrity
Superdome
iLO 2
version F
03.29 or
later
✓
✓
✓
✓
✓9
82
✓
✓
✓
1
2
3
4
5
6
7
8
9
The BIOS version does not apply to these servers.
address.
shutdown the hosts.
HP Power Regulator for Integrity servers requires Intel Itanium Processor 9100 series Dual-Core 1.6 GHz 18/24 MB parts. It also
requires HP-UX 11.31 with patches PHKL_36654, PHKL_37031, PHKL_37032, PHKL_36477, and PHKL_36478, or Microsoft
Windows Server 2008 with the "HP platform-controlled Power management" driver (other operating systems to be announced). If
Microsoft Windows Server 2008 was factory-installed by HP, the driver is already installed. If you have installed Microsoft Windows
Server 2008, then you must obtain the HP Smart Setup CD and manually install this Smart Component. The Smart Setup CD is
available as part of the HP Integrity Essentials Foundation Pack for Microsoft Windows (T2369AA) or is available from http://
www.hp.com under "Software and Driver downloads" for your platform.
Requires iLO firmware version 01.40.42 or later.
The DCPC Power ON/OFF action is not supported for this server.
Requires iLO firmware version 53.70.02 or later.
Supported for nPar only.
Table 64 Requirements and capabilities for HP Integrity NonStop servers
Server model
Minimum
iLO
firmware
version
Minimum
system
BIOS
version1
Data
Data
Dynamic
Center
Power
Power
Power
Thermal
Power
Maximum Power
Regulator Capping Mapping Metering
Power
Integrity NonStop
NB50000c
None
N/A
✓
✓
✓
Integrity NonStop
NB50000c-cg
None
N/A
✓
✓
✓
Integrity NonStop
NB54000c
None5
N/A
✓
✓
✓
✓
Integrity NonStop
NB54000c-cg
None5
N/A
✓
✓
✓
✓
Integrity NonStop
NS16x00
None
N/A
✓
Integrity NonStop
NX160000CG
None
N/A
✓
Integrity NonStop
NS14x00
None
N/A
✓
Integrity NonStop
NS5000cg
None
N/A
✓
Integrity NonStop
NS5000T
None
N/A
✓
Integrity NonStop
NS3000AC
None
N/A
✓
Integrity NonStop
NS2000
None
N/A
✓
Integrity NonStop
NS2000T
None
N/A
✓
Integrity NonStop
NS1x00
None
N/A
✓
83
1
2
3
4
5
The BIOS version does not apply to these servers.
address.
shutdown the hosts.
The Intelligent Power discovery feature is not supported when iPDU is configured with IPv6 addresses only
Minimum iLO firmware version for Power Regulator functionality is 1.40.42, which is included in system firmware bundle version
26.05.
Supported power-delivery devices for Insight Control power management
Table 65 Supported power-delivery devices
84
Device
Minimum firmware version
Eaton Power Xpert Meter 8000
12.1.6
HP Intelligent Power Distribution Unit
v1.4
HP PDR Management Module
P 1.00.10
HP PDU Management Module
1.00.14
Raritan Dominion PX (DPCS20A 30L6)
01.03.05
Raritan Dominion PX (PX-5532)
01.02.07
APC rPDU
v3.3.3
Liebert EM PDU Controller
2.rA
Eaton Powerware Switch ePDU
2.0.H
ServerTech Sentry Switch CDU
6.0g
IBM DPI PDU+
V0208001
HP UPS Management Module
2.0.05
B Hardware requirements and caveats for Insight Control
server migration
This appendix lists the hardware requirements of Insight Control server migration and any associated
caveats.
Storage controllers that Insight Control server migration supports
Insight Control server migration supports the storage controller devices shown in the following list.
Migrations are not supported to a storage controller in AHCI mode.
Table 66 Storage controllers that Insight Control server migration supports
Storage controller
See footnote at
end of table
HP SN1000E 16Gb Single port PCIe Fibre Channel Host Bus Adapter
HP SN1000E 16Gb Dual port PCIe Fibre Channel Host Bus Adapter
HP StoreFabric SN1000Q 16Gb 2-port PCIe Fibre Channel HBA
HP SN1100E 16Gb 2-port PCIe Fibre Channel Host Bus Adapter
HP 41B 4Gb PCIe to FC Single Port Host Bus Adapter
1
HP 42B 4Gb PCIe to FC Dual Port Host Bus Adapter
1
HP 8 Internal Port SAS Host Bus Adapter
HP 81B PCIe 8Gb Fibre Channel Single Port Host Bus Adapter
1
HP 81E 8Gb Single Port PCIe Fibre Channel Host Bus Adapter
HP 81Q PCIe Fibre Channel Host Bus Adapter
HP 82B PCIe 8Gb Fibre Channel Dual Port Host Bus Adapter
1
HP 82E 8Gb Dual Port PCIe Fibre Channel Host Bus Adapter
HP 82Q 8Gb Dual Port PCIe Fibre Channel Host Bus Adapter
HP FC1142SR 4Gb PCIe Host Bus Adapter
HP FC1242SR 4Gb PCIe DC Host Bus Adapter
HP FC2142SR 4Gb PCIe Host Bus Adapter
HP FC2242SR 4Gb PCIe DC Host Bus Adapter
HP H210i 6GB SAS/SATA Host Bus Adapter (2x4 int, daughter card)
HP H220i 6Gb SAS/SATA Host Bus Adapter (2x4 internal)
HP H221 6Gb SAS/SATA Host Bus Adapter (2x4 external)
HP H222 6GB SAS/SATA HBA (1x4 internal, 1x4 external)
HP QMH2672 16Gb FC HBA for BladeSystem c-Class
HP SC08Ge 2-ports Ext PCIe x8 SAS Host Bus Adapter
HP SC40Ge Host Bus Adapter
HP Smart Array B110i SATA RAID Controller
HP Smart Array B120i RAID Controller
2, 3
2
Storage controllers that Insight Control server migration supports
85
Table 66 Storage controllers that Insight Control server migration supports (continued)
Storage controller
HP Smart Array B320i RAID Controller
See footnote at
end of table
2
HP SSD RAID Bypass firmware support
HP Smart Array E200 Controller
HP Smart Array E200i Controller
HP Smart Array E500 Controller
HP Smart Array P212 Controller (4 internal, 4 external)
HP Smart Array P220i Controller
HP Smart Array P222 Controller
HP Smart Array P430 2GB SAS Controller
HP Smart Array P731m 2GB SAS Controller
HP Smart Array P700m Controller
HP Smart Array P230i SAS Controller
4
HP Smart Array P731m 512MB SAS Controller
4
4
4, 5
HP Smart Array B120i (006C) RAID controller
86
HP Smart Array B120i (0084)
6
Brocade 804 8Gb FC HBA for HP BladeSystem c-Class
1
Hardware requirements and caveats for Insight Control server migration
Table 66 Storage controllers that Insight Control server migration supports (continued)
Storage controller
See footnote at
end of table
Emulex LPe1105-HP 4Gb FC HBA for HP c-Class BladeSystem
Emulex LPe1205-HP 8Gb/s FC HBA for HP BladeSystem c-Class
Emulex LPe1205A-HP 8Gb/s FC HBA for HP BladeSystem c-Class
HP LPe1605 16Gb Fibre Channel Host Bus Adapter for BladeSystem c-Class
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem
QLogic QMH2562 8Gb FC HBA for HP c-Class BladeSystem
HP Fibre Channel 8Gb QMH2572 Adapter
1
2
3
4
5
6
In SLES operating systems, this Brocade FC HBA supports only SLES 11 SP2 and SLES 11 SP3.
Only RAID mode is supported.
RHEL 7 is not supported
HP SIM supports this Smart Array.
SLES 10 SP4 32bit not supported.
RHEL 5.9, 5.10, 6.4, 6.5, and SLES 11 SP3.
Converged network adapters that Insight Control server migration supports
Table 67 Converged network adapters supported by Insight Control server migration
Converged network adapter
See footnote at
end of table1
HP FlexFabric10Gb 2-port 554FLB Adapter
FCoE
iSCSI
FCoE
iSCSI
HP FlexFabric10Gb 2-port 554M Adapter
FCoE
iSCSI
FCoE
iSCSI
2
FCoE
3
iSCSI
4
FCoE
3
iSCSI
FCoE
iSCSI
HP CN1000E Dual Port Converged Network Adapter
FCoE
iSCSI
HP CN1000Q Dual Port Converged Network Adapter
FCoE
iSCSI
FCoE
2
2
2
3
7, 2
5
Converged network adapters that Insight Control server migration supports
87
Table 67 Converged network adapters supported by Insight Control server migration (continued)
Converged network adapter
See footnote at
end of table1
2
iSCSI
HP NC551i Dual Port FlexFabric 10Gb Converged Network Adapter
FCoE
iSCSI
7, 2
HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
FCoE
6
iSCSI
7, 2
HP NC553i 10Gb 2-port FlexFabric Converged Network Adapter
FCoE
iSCSI
HP NC553m 10Gb 2-port FlexFabric Converged Network Adapter
FCoE
iSCSI
7, 2
HP StoreFabric CN1200E Dual Port Converged Network Adapter
FCoE
8
iSCSI
1
2
3
4
5
6
7
8
7, 2
Migration supports both Windows and Linux .
Supported for the following operating systems only (32 bit and 64 bit): RHEL 5.8, 5.9, 5.10,6.2, 6.3, 6.4, and 6.5
SLES11 SP2 and SP3.
Supported by HP SIM..
Not supported for SLES 11 SP3 64 bit migrations.
Linux operating systems support (32 bit and 64 bit): RHEL 5.8, 5.9, 5.10,6.2, 6.3, 6.4, and 6.5 SLES11 SP2 and SP3.
For servers with NC551m FCoE cards, under RBSU select System Options→Processor Options. Disable No_Execute
Page-Protection and AMD Virtualization for AMD-based processors and Intel Hyper-Threading for
Intel-based processors.
Windows 2003 on iSCSI is not supported.
Supported also by HP SIM.
Network interface cards that Insight Control server migration supports
Insight Control server migration supports the following NIC devices:
Table 68 Network interface cards that Insight Control server migration supports
Network Interface Card
See footnote at
end of table
HP Ethernet 1Gb 4-port 331FLR Adapter
HP Ethernet 1Gb 4-port 331i Adapter
HP Ethernet 1Gb 4-port 331T Adapter
HP Ethernet 1Gb 2-port 332T Adapter (BCM5720)
HP Ethernet 1Gb 2-port 361FLB Adapter
HP Ethernet 1Gb 4-port 366M Adapter
HP Flex-10 10Gb 2-port 530FLB Adapter
HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter
HP Flex-10 10Gb 2-port 530M Adapter
88
1
Table 68 Network interface cards that Insight Control server migration supports (continued)
See footnote at
end of table
1
1
2
HP Ethernet 10Gb 2-port 560FLB Adapter (BLOM)
HP Ethernet 10Gb 2-port 560FLR SFP+ Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP Ethernet 10Gb 2-port 561FLR-T Adapter
HP Ethernet 10Gb 1-port P560FLR-SFP+ Adapter
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
3
3
3
3
HP FlexFabric 10Gb 2-port 526FLR-SFP + Adapter
1
4
4
4
HP StoreFabric CN1100R Dual Port Converged Network Adapter
1
1
HP Dual port 10G Converged Network Adapter for HP Server Connectivity to Storage and Networks
3
1
1
1
HP NC110T PCI-E Gigabit Server Adapter
HP NC112i 1-port Server Adapter
HP NC112T PCI-E Gigabit Server Adapter
HP NC320i Integrated Gigabit Server Adapter
Network interface cards that Insight Control server migration supports
89
HP NC324i Integrated Dual Port PCI Express Gigabit Server Adapter
HP NC325m PCI Express Quad Port Gigabit Server Adapter
HP NC326m PCI Express Dual Port Gigabit Server Adapter
HP NC330i (BCM5717)
HP NC332i Ethernet 1Gb 2-port Adapter (BCM5709)
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC360T PCI Express Dual Port Gigabit Server Adapter
HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
HP NC364T PCI-E Quad Port Gigabit Server Adapter
HP NC365T 4-port Ethernet Server Adapter
HP NC366i Quad-Port Adapter
HP NC370i HP BladeSystem Dual Multifunction Network Adapter
HP NC371i Integrated PCI-X Multifunction Gigabit Server Adapter
HP NC373F PCI-E Multifunction 1000SX Gigabit Server Adapter
HP NC373i Integrated Multifunction Gigabit Server Adapter
HP NC373m PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC373T PCI-E Multifunction Gigabit Server Adapter
HP NC375i Quad Port Gigabit Server Adapter
HP NC375T PCI Express Quad Port Gigabit Server Adapter
HP NC380T PCI-E Dual Port Multifunction Gigabit Server Adapter
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC510C PCI-E 10 Gigabit Server Adapter
HP NC510F PCI-E 10 Gigabit Server Adapter
HP NC512m Dual Port 10GbE Multifunction BL-c Adapter
HP NC522SFP Dual Port 10GbE Gigabit Server Adapter
HP NC523SFP 10Gb 2-port Server Adapter
HP NC524SFP Dual Port 10GbE Module
HP NC532i Dual Port 10GbE Multifunction BL-c Adapter
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
90
See footnote at
end of table
See footnote at
end of table
HP NC543i 2-port 4x QDR IB/10Gb Adapter
HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
HP NC550SFP 10Gb 2-port PCIe x8 Ethernet Adapter
1
1
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
HP NC552m 10Gb 2-port Flex-10 only Ethernet 10GbE Mezzanine Card for BL series Gen8
servers
1
1
HP NC7170 Dual Port PCI-X Gigabit Server Adapter
HP NC7771 Gigabit Server Adapter
Broadcom 5719 quad port
1
2
3
4
Also a converged network adapter.
Supported by Server Migration in NIC mode only.
Not supported in an FCoE or iSCSI configuration.
Not supported for SLES 11 SP3 64 bit migrations in iSCSI mode.
File system types that Insight Control server migration supports
Table 69 File system types that Insight Control server migration supports
Type of server migration
File system type
Microsoft Windows server
• NTFS
• FAT 16/32
NOTE:
This partition cannot be resized.
• Ext2
Linux server
• Ext3
• Ext4
• ReiserFS
• Linux swap
• LVM
Caveats for Linux server migrations
The following caveats apply to Linux server migrations:
•
Migration of servers with the GRUB boot loader is supported.
•
Migrations to Citrix are not supported.
•
Migration of the following are not supported:
◦
Xen kernel.
File system types that Insight Control server migration supports
91
◦
Para-virtualized kernels.
◦
Software RAID—Ensure that none of the OS critical file systems are on a disk configured
with software RAIDs.
◦
Encrypted file systems.
◦
Dual-mode Microsoft Windows and Linux.
◦
Snapshot logical volumes.
Supported storage adapters for manual boot of a destination virtual
machine
Table 70 Storage adapters supported for manual boot of a destination virtual machine
OS
LSI storage adapter
LSI SAS storage adapter
Bus Logic storage adapter
✓
Microsoft Windows Server
2012
2008
✓
2003
✓
Red Hat Enterprise Linux (RHEL)
✓
SUSE Linux Enterprise Server
(SLES)
✓
✓
✓
Additional Insight Control server migration information
Supported Intelligent Provisioning versions
Table 71 Intelligent Provisioning versions supported by Insight Control server migration
Insight Control server migration Intelligent
Intelligent
Version
Provisioning 1.40 Provisioning
1.45
Server Migration 7.2
✓
Intelligent
Provisioning 1.50
✓
Intelligent
Intelligent
Provisioning 1.60 Provisioning 2.0
✓
1
✓
Server Migration 7.2.1
Server Migration 7.2.2
✓
✓4
✓
✓2
✓
✓4
✓
✓2
Server Migration 7.3.1/7.3.2
✓3
✓4, 5, 6, 7
✓8
✓9
✓10
✓11
✓
1
2
3
4
5
6
7
8
9
92
✓
ACU/SSA not supported.
Migration of Windows 2008 SP2 to SN1000Q Controller results in blue screen.
SLES11 SP3 x64 bit and SLES 11 SP3 x32 bit not supported.
Autoboot to BL460c Gen8 with 554FLB iSCSI, BL460c Gen8 with 554FLB as FCoE, and DL360p Gen8 with P431 are not supported.
Controller name not displayed for Smart Array B120i, Smart Array P220i, FlexFabric 10Gb 2-port 526FLR-SFP.
RHEL 5.10 x64 bit not supported.
Emulex iSCSI card on Gen8 servers are not supported.
RHEL 5.10, RHEL 6.5 (both x32 and x64) are not supported.
SLES 10 SP4 x64 bit not supported.
10
11
RHEL 5.10, RHEL 6.4, RHEL 6.5 both x32 and x64 are not supported.
RHEL 5.8 on Qlogic iSCSI not supported
Multipath I/O support for Linux and Windows
Linux: Insight Control server migration supports multipath I/O on Linux if the source system configured
on multipath and the destination system configured on a single path.
Windows: Insight Control server migration supports multipath I/O with both source and destination
configured on (single or multipath).
Additional Insight Control server migration information
93
C Hardware requirements and caveats for Insight Control
server provisioning
Adapters, controllers, and network cards that Insight Control server
provisioning supports
The Insight Control server provisioning HP-provided Build Plan boot to Intelligent Provisioning by
default on all ProLiant Gen8 and greater servers. To change a build plan to boot to PXE, add
--method=network and --force to all Boot script steps’ parameters within the Build Plan. Some
adapters, controllers, and network cards are only supported via a PXE boot. For Matrix
environments, see the Matrix Operating Environment 7.4 Release Notes located at http://
www.hp.com/go/matrixoe/docs for information about disabling PXE-less boot using HP Intelligent
Provisioning at a global level or for specific servers (forcing PXE boot).
IMPORTANT: For information on how to deploy an operating system to target servers with SAN,
refer to the HP SAN Design Reference Guide located at http://h20000.www2.hp.com/bc/docs/
support/SupportManual/c00403562/c00403562.pdf. Open zone configuration violates several
of the HP SAN Design Guide best practices rules, and these violations may be the cause of server
crashes. Please see sections on Common server, common HBAs, different HBAs and Zoning rules
in the HP SAN Design Reference Guide for guidance.
IMPORTANT: For more information regarding HP Emulex adapters, see the HP Emulex Adapters
Release Notes located at http://www.hp.com/go/hpsc
Table 72 Network adapters, storage controllers, and network interface cards for Insight Control
server provisioning
Network adapters, storage controllers, and network interface cards
See footnote at end of table
HP Ethernet 1GB 4-port 331FLR Adapter
HP Ethernet 1GB 4-port 331T Adapter
HP Ethernet 1Gb 4-port 366FLR Adapter and PCA ALOM 1GbE 4port Intel i350
1
HP Ethernet 10Gb 2-port 530T Adapter and 2p 10GbaseT NIC standup
HP Ethernet 10GB 2-port 530FLR-SFP Adapter
HP Ethernet 10Gb 2-port 530SFP Adapter
HP Ethernet 10Gb 2-port 560SFP+ Adapter
HP Ethernet 10Gb 2-port 560FLR SFP+ Adapter
HP Ethernet 10Gb 2-port 560FLR SFP+ Adapter and PCA Mezz 10GbE 2port Intell
82599
94
Hardware requirements and caveats for Insight Control server provisioning
2
server provisioning (continued)
HP Ethernet 10Gb 2-port 560M Adapter and PCA ALOM 10GbE 2port Intel 82599
1
HP Ethernet 10Gb 2-port 561FLR-T Adapter
3
3
HP Ethernet 10Gb 1-port P560FLR-SFP+ Adapter
HP Dual port 10G Converged Network Adapter for HP Server Connectivity to Storage
and Networks
4
HP Flex-10 10Gb 2-port 530FLB Adapter
HP FlexFabric 10Gb 2-port 533FLR-T Adapter
4
4
4
4
HP FlexFabric 10Gb 2-port 536FLR-SFP+Adapter
HP FlexFabric 10GB 2-port 551M Adapter
HP FlexFabric 10GB 2-port 554M Adapter
HP FlexFabric 10GB 2-port 554 FLB Adapter
HP FlexFabric 10Gb 2-port 554FLR-SFP Adapter
14
5, 8, 9
6, 7, 8, 9, 10
6, 7, 8, 9, 10
7, 11
HP FlexFabric 20Gb 2-port 650FLB/650FLB FIO Adapter
7, 11
HP StoreFabric CN1100R Dual Port Converged Network Adapter
3
Brocade 804 8Gb Fibre Channel Host Bus Adapter for HP c-Class BladeSystem
Emulex LPe 1205-HP 8Gb/s FC HBA for HP BladeSystem c-Class
12
Emulex LPe 1205A-HP 8Gb/s FC HBA for HP BladeSystem cClass
12
HP LPe1605 16Gb Fibre Channel HBA for BladeSystem c-Class
HP StoreFabric CN1200E 10Gb Converged Network Adapter
7, 11
QLogic QMH2562 8Gb FC HBA for HP BladeSystem c-Class
12
HP QMH2572 8Gb Fibre Channel Host Bus Adapter
12
HP StoreFabric SN1000Q 16GB 1-port PCIe Fibre Channel HBA
12, 13, 14
12, 13, 14
HP H210i Host Bus Adapter
Adapters, controllers, and network cards that Insight Control server provisioning supports
95
server provisioning (continued)
HP H220 Host Bus Adapter
HP H222 Host Bus Adapter
HP QMH2672 16Gb FC HBA for BladeSystem c-Class
HP SN1000E 16Gb 1P FC HBA Adapter
HP SN1000E 16Gb 2P FC HBA Adapter
HP SN1100E 16Gb 2-port PCIe FC HBA Adapter
HP NC552SFP 10Gb 2-port Ethernet Server Adapter
HP Smart Array P220i
HP Smart Array P222
HP Smart Array P420
HP Smart Array P420i
HP Smart Array P421
HP Smart Array P731m 2GB SAS Controller
HP Smart Array P822
HP Smart Array B120i SATA
15
HP Smart Array B120i SATA RAID Controller
15
HP Smart Array B140i SATA Controller
16
HP Smart Array B320i SATA
15
HP Smart Array B320i SAS RAID Controller
HP Smart Array P731m 512MB SAS Controller
HP Smart Array P230i SAS Controller
1
2
3
4
5
For HP ProLiant DL and SL servers.
For HP ProLiant BL servers.
Insight Control server provisioning does not support Windows deployment via Intelligent Provisioning 1.50 on Gen8
servers. Windows deployment via PXE is supported.
Not supported in an FCoE or iSCSI configuration.
When booting via Intelligent Provisioning:
• NIC support only.
96
17
Hardware requirements and caveats for Insight Control server provisioning
• No FCoE or iSCSI support.
When booting via PXE:
• All boot modes support; however, UEFI boot mode requires minimum FlexFabric adapter firmware v2.13.8.
• FCoE and iSCSI supported, except for Red Hat 7 and SLES 11.
6
7
8
Windows and Linux deployment with FCoE and iSCSI configuration is not supported with Intelligent Provisioning on
Gen8 and Gen9 servers. Windows and Linux deployment via PXE is supported.
Deployment of SLES11 SP3 is not supported in iSCSI or FCoE configuration with this adapter
Deployment of Red Hat 6.x and Red Hat 7.x with FCoE configuration requires that you add the fcoe directive to the
Kickstart file. The fcoe directive in the Kickstart file requires that the NIC attached to the SAN be specified.
• – nic= (mandatory)–The name of the device to be activated.
• – dcb=–Establish Data Center Bridging (DCB) settings.
• – autovlan–Discover VLANs automatically.
NOTE: At a minimum, you must specify the –nic = flag. For example; fcoe –nic=eth0. Be aware that with Red Hat
7.x the Ethernet device names have changed. See the Red Hat Enterprise Linux 7 documentation at https://
access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Networking_Guide/
ch-Introduction_to_RHEL_Networking.html for more information.
9
Select “View by Converged Network Adapter” link on SPOCK at http://www.hp.com/storage/spock for additional
information on these Broadcom Converged Network Adapter cards.
10
iSCSI and FCoE configuration is not supported with these adapters on the BL465c and DL385p Gen8 AMD platforms.
11
When booting via Intelligent Provisioning:
• All adapter functionality is supported, except Windows FCoE
When booting via PXE:
• FCoE and iSCSI are supported
• NIC is not supported
12
For servers with both Emulex and QLogic cards, only one can be enabled on the target server when deploying an OS.
Deployment of RHEL 5.9, SLES 11.2, or ESXi 5.x is not supported.
14
Deploying Microsoft Windows 2012 R2 with a target server running Intelligent Provisioning 2.00 or later is not supported.
15
The custom attribute kernel_arguments must be set to blacklist=ahci for Red Hat installations or broken
modules=ahci for SLES installations.
16
The custom attribute kernel_arguments must be set to blacklist=ahci for RH7 installations.
17
The custom attribute kernel_arguments must be set to brokenmodules=hpsa for SLES11 SP2 installations.
13
Adapters, controllers, and network cards that Insight Control server provisioning supports
97
D HP-UX CMS requirements
This appendix lists the hardware and software requirements for a CMS that is running HP-UX.
HP-UX CMS requirements
This section lists the following requirements for an HP-UX CMS:
•
HP-UX CMS hardware requirements: Table 73 (page 98).
•
HP-UX CMS software requirements: Table 74 (page 99).
•
Managed system requirements-managing from an HP-UX CMS: Table 75 (page 100).
Table 73 HP-UX CMS hardware requirements
Supported servers
HP Integrity servers
c-Class Integrity blades
Processors
• HP-UX 11i v2:
At least 1.1 GHz (1.3 GHz or later recommended)
Two or more processing cores are required (four cores
recommended)
• HP-UX 11i v3:
At least 1.1 GHz (1.6 GHz or later recommended)
Two or more processing cores are required (eight cores
recommended)
Memory
HP-UX 11i v2: 5 GB RAM (8 GB RAM recommended for maximum
hardware configuration)
HP-UX 11i v3: 5 GB RAM (12 GB RAM recommended for
maximum hardware configuration)
Disk space requirements: /
20 MB minimum for Systems Insight Manager
Disk space requirements: /opt
Systems Insight Manager requires 600 MB.
Matrix Operating Environment requires an additional 200 MB.
Disk space requirements: /var/opt
Log files are stored in the directories /var/opt/amgr, /var/
opt/gwlm, and /var/opt/vse/logs. These logs are not
automatically trimmed.
Capacity Advisor requires a maximum of 4 GB for every 100
workloads to maintain 4 years of historic data. This data is stored
in the directory /var/opt/vse. You can modify the amount of
data retained in data collection by modifying the
PROFILE_RETAIN_DAYS variable. For details, see the HP
Capacity Advisor User Guide.
Disk space requirements: database storage
Global Workload Manager requires at least 1 GB. If you intend
to keep historical data, HP recommends allowing 4 GB for every
100 workloads that gWLM manages. If you are not interested in
historical data, you can trim the historical database by using the
following command:
gwlm history --truncate
If you are using the default Systems Insight Manager PostgreSQL
database, this space will be allocated in /var/opt. If you are
using Oracle, this space will be allocated on the Oracle database
server.
For more information, please see the HP Global Workload
Manager User Guide.
98
Table 73 HP-UX CMS hardware requirements (continued)
Disk space requirements: swap space
4 GB total swap space for HP 9000 systems
5 GB total swap space for HP Integrity systems
Enclosures
BladeSystem c3000
BladeSystem c3000 Tower
BladeSystem c7000
BladeSystem c7000 Platinum
NICs
c-Class embedded GbE NICs and mezzanine cards
HBAs
c-Class mezzanine FC HBAs (QLogic and Emulex)
Blade interconnects
Virtual Connect- Ethernet and Virtual Connect- Fibre Channel
Cisco Ethernet switches outside enclosure (65xx, 29xx, 37xx) and
inside enclosure
Shared boot storage: boot and data LUNs
MSA 2040 FC
MSA P2000 G3
MSA 1040 with GL105 Fibre Channel
MSA 1040 Fibre Channel/iSCSI/ with GL200 firmware
HP EVA 4/6/8000; HP P6300/P6350 and P6500/P6550
Table 74 HP-UX CMS software requirements
Operating systems
HP-UX 11i v2: OE/AR0409 or later (English, Japanese)
HP-UX 11i v3: OE/AR0709 or later (English, Japanese)
Virtualization platforms
Integrity VM guest that is running HP-UX 11i v2 or 11i v3.
An HP-UX CMS that is running in an Integrity VM guest supports
Integrity VM versions 3.x, 4.x, and 6.x.
Databases
PostGreSQL 8.2.1
Oracle 11g R2
Systems Insight Manager
Systems Insight Manager v7.4
Browsers
Microsoft Internet Explorer 9.x
Microsoft Internet Explorer 8.x
Microsoft Internet Explorer 10
Microsoft Internet Explorer 11
Mozilla Firefox 24 ESR
Google Chrome version 3x.x
Java
Java Out-of-Box (JOOB) version 2.03 or later is required. JOOB is
shipped with HP-UX as optional selectable software. Installation of
JOOB requires a reboot.
Perl
v5.8.2 or later
gWLM data access from OpenView Performance To allow OpenView Performance Agent access to the gWLM data,
Agent
the MeasureWare.PERFDSI file set (version C.03.85 or later) must
be installed. The following command lists the file set if it is installed
on the system:
/usr/sbin/swlist MeasureWare.PERFDSI
If this file set is not installed, it is available for installation as part of
HP GlancePlus/UX Pak version C.03.85.00 or later.
CMS as a managed system
If the CMS is also a managed system, then all of the additional
requirements for managed systems apply to the CMS. For those
requirements, see Table 75 (page 100).
99
NOTE:
•
HP Matrix OE logical server management and Matrix infrastructure orchestration are not
supported on an HP-UX CMS.
•
A Matrix Operating Environment HP-UX CMS does not support managing x86 systems.
Table 75 (page 100) lists the requirements for managed systems when managing from an HP-UX
CMS.
Table 75 Requirements for managed system — managing from an HP-UX CMS
Supported servers
c-Class Integrity blades (Windows, Linux, HP-UX)
HP Integrity servers (non-blade)
HP 9000 (PA-RISC 2.0) servers
Enclosures
BladeSystem c3000
BladeSystem c3000 Tower
BladeSystem c7000
BladeSystem c7000 Platinum
NICs
c-Class embedded GbE NICs and mezzanine cards
HBAs
c-Class mezzanine FC HBAs (QLogic and Emulex)
Blade interconnects
Virtual Connect Ethernet and Virtual Connect Fibre Channel
Cisco Ethernet switches outside enclosure (65xx, 29xx, 37xx) and
inside enclosure
Shared boot storage: boot and data LUNs
MSA P2000 G3
HP EVA 4/6/8000; HP P6300/P6350 and P6500/P6550
Operating systems
Microsoft Windows Server 2008 for Itanium-based systems SP2
Microsoft Windows Server 2008 R2 for Itanium-based systems SP2
HP-UX 11i v2 Update 2 (11.23 IA/PA)
HP-UX 11i v3
Virtualization platforms
Integrity VM guest that is running a supported operating system
(HP-UX, Integrity Windows, Integrity Linux)
Other requirements
Virtual Connect 4.31
iLO 2 3.15
Onboard Administrator 4.30
HP WBEM Services for HP-UX: A.02.00 minimum required;
A.02.09.04 or later recommended for security and performance
improvements.
OpenPegasus 2.5 required for Linux.
WMI Mapper for Integrity Windows v2.7.0.0 required for Integrity
Windows managed systems.
For each of the providers and agents listed in the remainder of this table, HP recommends that you update to the latest
version provided in this release unless otherwise noted. For more information, see Table 56 (page 65).
Utilization Provider
100 HP-UX CMS requirements
The Utilization Provider is required on all Matrix Operating
Environment managed systems except standalone Linux. It provides
utilization data for Virtualization Manager and Capacity Advisor.
Table 75 Requirements for managed system — managing from an HP-UX CMS (continued)
Table 56 (page 65) lists the latest version of the Utilization Provider
provided with this release of the Matrix Operating Environment.
Application Discovery WBEM Provider
The Application Discovery WBEM Provider version A.04.01 or later
is required on all systems that Application Discovery will manage.
For the latest version, see Table 56 (page 65).
gWLM Agent
The gWLM agent is required on all systems that gWLM will manage.
For details on the appropriate version(s) of gWLM, see HP Global
Workload Manager User Guide.
HP recommends that you upgrade to the latest version of the gWLM
agent. For the latest version, see Table 56 (page 65).
nPartition Provider
Install this software on HP-UX managed systems even if the system
does not use nPartitions.
• HP-UX 11i v2 on HP 9000 requires version B.23.01.07.05 or
later.
• HP-UX 11i v2 on HP Integrity requires version B.23.01.07.05 or
later.
• HP-UX 11i v3 requires version B.31.02.01 or later.
For the latest version, see Table 56 (page 65).
VM Provider
You must install VM Provider version 1.20 or later on HP Integrity
VM host systems. You can use earlier versions of the VM Provider
on individual virtual machines. Installed versions of HP Integrity
Virtual Machines, VM Provider, and VMGuestLib must be compatible.
Do not mix different versions of these components on the same
system.
For the latest version of the VM Provider, see Table 56 (page 65).
IMPORTANT: You cannot install the VM Provider on systems that
are running HP-UX 11i v3 (B.11.31).
vPar Provider
The vPar Provider that was included with the March 2006 release
of HP-UX 11i v2 (B.11.23) does not work properly. With the March
2006 version installed, Systems Insight Manager and Matrix
Operating Environment do not discover and display virtual partitions
correctly. The vPar Provider that is included with Matrix Operating
Environment fixes this problem. However, it presents the same version
number as the March 2006 version.
This problem does not occur with the HP-UX 11i v3 (B.11.31) vPar
Provider.
You can fix this problem by executing the following command on
each system where the vPar Provider has been installed:
/opt/wbem/bin/cimmof -n root/cimv2/vpar \
/opt/vparprovider/mof/HPUX_VParLocalPartition.mof
Alternatively, on systems that are running HP-UX 11i v2, you can
remove the installed version of the vPar Provider and install the
version delivered with the Matrix Operating Environment (or forcibly
reinstall the Matrix Operating Environment version).
For the latest version of the vPar Provider, see Table 56 (page 65).
Agents and providers bundled with the Matrix Operating Environment
For a list of the agents and providers that are bundled with the Matrix Operating Environment, see
Table 56 (page 65).
Agents and providers bundled with the Matrix Operating Environment
101
Acronyms and abbreviations
AHCI
Intel SATA Advanced Host Controller Interface
AVIO
Accelerated Virtual I/O
CMS
Acronym for the Central Management Server (CMS), the server on which HP Insight Management
is installed
CNA
Converged Network Adapter
CSV
Cluster Shared Volume
DAS
Direct Attached Storage
DCPC
Data Center Power Control
DNS
Domain Name System
EFI
Extensible Firmware Interface
ePDU
Enclosure PDU
FAT
File Allocation Table
FC
Fibre Channel
FCoE
Fibre Channel over Ethernet
Gbe
Gigabit Ethernet
GRUB
GNU GRand Unified Bootloader
HBA
Host Bus Adapter
IDE
Integrated Drive Electronics
iLO
Acronym for HP integrated Lights Out
Installer
Abbreviation for the HP Insight Management Installer
Integrated installer
Another name for the HP Insight Management Installer
iSCSI
Internet Small Computer System Interface
ISO
International Organization for Standardization
JRE
Java Runtime Environment
KVM
Kernal based virtual machine
LUN
Logical unit number
LVM
Logical Volume Manager
Matrix OE
Abbreviation for HP Matrix Operating Environment, which includes recovery management,
infrastructure orchestration, and visualization capabilities and the HP Global Workload Manager
(gWLM) and HP Capacity Advisor software
migr
Abbreviation for HP Insight Control server migration
NAS
Network Attached Storage
NFS
Network File System
NPIV
N_Port ID Virtualization
NTFS
New Technology File System
PCIe
Peripheral Component Interface Express
PDR
Power distribution rack. A rack module that divides redundant input power to several nearby
racks.
PDU
Power distribution unit. For more information, see HP Insight Control Power Management User
Guide at the following website:
perf
Abbreviation for HP Insight Control performance management
pwr
Abbreviation for HP Insight Control power management
102 Acronyms and abbreviations
PXE
Preboot Execution Environment
RDM
Raw Disk Mapping
RHEL
Acronym for Red Hat Enterprise Linux, a Linux OS distributed by Red Hat, Inc.
rPDU
Rack Mount PDU
SAS
Serial Attached SCSI
SIM
Acronym for HP Systems Insight Manager
SLES
Acronym for SUSE Linux Enterprise Server, a Linux OS distributed by Novell, Inc.
SLVM
Shared Logical Volume Manager
SMI-S
Storage Management Initiative Specification
SPM
Acronym for HP Storage Provisioning Manager
srvr prov
Abbreviation for HP Insight Control server provisioning
SSL
Secure Sockets Layer
VCEM
Acronym for HP Virtual Connect Enterprise Manager
virt
Abbreviation for HP Insight Control virtual machine management
Virtual machine
host
A system that has a hypervisor installed to host virtual machines. A host machine can host more
than one virtual machine.
VM
Virtual machine
VMFS
See VM file system.
VXLAN
Virtual eXtensible LAN
WAIK
Windows Automated Installation Kit
WinPE
Windows Preinstallation Environment
WWN
World Wide Name
103
Index
A
abbreviations and acronyms used in this document, 102
B
blade server
supported as managed system, 27
BladeSystem
enclosures, 27
mezzanine card, 45
browser, 22
browsers
supported, 22
bundled agents and providers
Matrix Operating Environment, 65
C
cluster
configuring CMS in, 24
CMS
acronym, 102
browsers, 22
configuring in a cluster, 24
database, 20
disk space requirements, 10
firmware requirements, 13
hardware requirements, 9
memory requirements, 10
new OS and hypervisor support, 6
supported configurations, 21
supported hypervisors, 18
supported Microsoft Windows operating systems, 15
unsupported configurations, 21
CMS hardware requirements
for HP-UX, 98
CMS software requirements
for HP-UX, 98
contact HP, 68
D
database
supported on CMS, 20
Debian Linux, 55
depl
abbreviation, 102
disk space
on the CMS, 10
display
recommended screen resolution, 23
domain, 21
E
EMC, 43
enclosure
supported, 27
EVA array
104 Index
supported by Matrix recovery management, 44
F
failover cluster
fibre channel storage, 40
file system types
supported for Insight Control server migration, 91
firmware recommendations
for managed systems, 47
H
hardware requirement
for Insight Control server provisioning, 13
for the CMS, 9
hardware requirements
for Insight Control power management, 72
for VCEM, 44
hardware support
new, 7
high-availability environment
host bus adapter
supported, 45
HP 3PAR StoreServ
storage, 37
HP Integrity server
HP OneView for Microsoft System Center
hardware and software requirements, 69
HP OneView for VMware vCenter
HP P2000 G3 MSA
for storage, 37
HP P9000 XP
storage, 37
HP ProLiant server
HP StoreAll
for storage, 37
HP StoreEasy
for storage, 37
HP StoreVirtual
for storage, 37
HP-UX
CMS hardware requirements, 98
CMS software requirements, 98
managed system requirements, 98
HP-UX requirements
for Integrity VM hosts, 61
hypervisor
support introduced in this release, 6
hypervisor guest
supported OS, 61
hypervisor host
supported on managed systems, 60
I
iLO
QuickSpecs, 69
Insight Control server migration
supported file system types, 91
supported storage array controllers, 85
Insight Control server provisioning
browsers, 22
hardware requirements, 13, 94
management server requirements, 9
media server, 15
scalability, 15
software requirements, 15, 22
solution limits, 15
supported servers, 27
Installer
abbreviation, 102
Integrated Lights Out see iLO
Integrity Essentials Foundation Pack for Linux Support Pack,
47
Integrity server
Integrity Support Pack for Windows servers, 47
Integrity VM hosts
running on HP-UX, 61
IO accelerators, 45
iSCSI
storage, 41
L
LAN switch, 41
language support, 18
M
managed system
firmware recommendations, 47
new OS and hypervisor support, 6
software requirements, 48
supported enclosures, 27
supported hardware, 45
supported hypervisor hosts, 60
supported operating systems, 48
supported servers, 27
supported VM guests, 60
managed system requirements
for HP-UX, 98
Matrix KVM Admin Console
Matrix KVM Admin Console appliance
Matrix KVM Private Cloud
browsers, 22
Matrix Operating Environment
bundled agents and providers, 65
Matrix recovery management
storage array support, 44
memory
on the CMS, 10
Microsoft Failover Clustering, 24
Microsoft Windows domain, 21
Microsoft Windows OS
Microsoft Windows workgroup, 21
migr
abbreviation, 102
N
network interface card see NIC
NIC
supported , 45
supported by server migration, 88
O
On-demand provisioning, 43
operating system see OS
Oracle Linux, 55
OS
support introduced in this release, 6
supported languages, 15
OS support on managed system
Debian, 55
HP-UX, 56
IBM AIX, 57
Microsoft Windows 7, 52
Microsoft Windows Server 2003, 51
Microsoft Windows Small Business Server 2003, 52
Microsoft Windows Vista, 52
Novell NetWare, 57
Open VMS, 56
Oracle Solaris, 57
Red Hat Enterprise Linux, 54
SUSE Linux Enterprise Server (SLES), 55
Ubuntu, 55
P
perf
abbreviation, 102
ProCurve switch, 41
ProLiant server
pwr
abbreviation, 102
105
Q
switch recommendations, 40
QuickSpecs
iLO, 69
T
R
typographic conventions, 70
recommended
display resolution, 23
U
S
V
scalability
screen
recommended display resolution, 23
server
server blade
server migration
supported NICs, 88
server requirements
for Insight Control power management, 72
service pack, 46
Service Pack for ProLiant, 46
SIM
abbreviation, 102
smart array controller
supported, 45
software requirement
software requirements
additional, 22
software support
new, 6
software technical support, 68
solution limits
SPM
solutions supported by, 43
SPM adapter
for EMC, 43
SPP, 46
srvr prov
abbreviation, 102
storage
HP 3PAR StoreServ , 37
HP P2000 G3 MSA , 37
HP P9000 XP , 37
HP StoreAll , 37
HP StoreEasy , 37
HP StoreVirtual , 37
supported, 37
VM guests, 42
storage array
supported, 45
storage array controller
supported for Insight Control server migration, 85
Storage Provisioning Manager see SPM
support matrix
for related products, 69
VCEM
abbreviation, 102
virt
abbreviation, 102
Virtualization Management Environment software, 62
VLAN switch, 41
VM guest
storage, 42
VM guests
VMware vCenter Server software, 62
VMware VXLAN
support, 42
106 Index
Ubuntu Linux, 55
W
workgroup, 21

HP Insight Management 7.4 Support Matrix - Hewlett

Transcription

Similar documents

Which two heads are better than one?

Lowest Prices Guaranteed

Kensington® VM4000 4K Video Adapter Mini DP

Faculty Activity Reporting: How to Manage It Quickly, Efficiently, and Accurately

HP ProLiant SCVMM 2012 Integration Kit (v 2014.09.0) User Guide Abstract

Chapter 12 – Problem Solving Definitions

Axiom Insight - Axiom Business Systems

SU-233/PVS M3X Tactical Illuminator