Tenders in sealed covers in printed tender forms

Transcription

Tenders in sealed covers in printed tender forms
GOVERNMENT OF WEST BENGAL
PUBLIC WORKS DEPARTMENT
Office of the Executive Engineer (P.W.D.),
Nadia Construction Division,
Krishnagar, Nadia.
ABRIDGED NOTICE INVITING TENDER NO. 16 OF 2014 – 15 of Executive Enguineer, P.W.D., Nadia Construction Division. (P.W.D.)
Tenders in sealed covers in printed tender forms as specified hereinafter invited by the undersigned for the following
works from eligible tenderers as per particulars given below and will be received by the Executive Engineer (P.W.D.),
Nadia Construction Division, Krishnagar, Nadia up to the date and time specified there and will be opened on the
same date at 2.30 P.M. by the Executive Engineer (P.W.D.), Nadia Construction Division, Krishnagar, Nadia.
1)
Name of work
:
As per Annexed Sheet
2)
Name of the Concerned Sub-Division (P.W.D.)
:
3)
Estimated amount put to Tender
:
As per Annexed Sheet.
4)
Earnest Money to be Deposited
:
As per Govt. Order.
5)
Contractors eligible to submit tenders
:
As per Annexed Sheet.
6)
Printed W.B.F. in which tender is to be submitted
:
2911(ii)
7)
Cost of specific W.B.F. including upto date
Corrigenda &addenda
:
Rs. 5.00
8)
Cost of other documents
:
Rs. 750.00
9)
Date of Publishing
:
17.03.2015
10)
Time of completion
:
As per Annexed Sheet.
11)
Last date & time limit for receipt of Tender
:
30.03.2015 upto 2.00 P.M.
12)
Location of stack-yard or Godown from
where materials are to be issued.
:
Krishnagar/ Ranaghat / Kalyani
13)
From which Tender document will be available
:
Departmental Website (pwdwb.in)
14)
Place for submitting Tender document
: To be dropped in the tender box lying in the Chamber of
Executive Engineer, Nadia Construction Division, P.W.D.
15)
Earnest money
:
16)
Validity of the Tender
: The offer will remain valid for acceptance for 120 days from
the date of receipt of tender.
17)
Guiding schedule of rates for Supplementary
items of work
Krishnagar Construction Sub-Division No.--III
Should be submitted in the shape of Bank Draft/ pay order at
the time of submission of Tender from any Nationalized
Bank only drawn in favour of Executive Engineer (P.W.D.),
Nadia Construction Division. P.W.D. @ 2% of the estimated
amount put to tender.
: Schedule of rates of P.W.(Roads) Department with upto date
Addenda & Corrigenda (w.e.f. 01.07.2014 for Central Circle
(P.W.D.), Schedule of rates of P.W.D., W.B. for Building.
[ N.B. :- In case of any bandh and holiday on the aforesaid dates, the next working day will be treated as scheduled / prescribed date for
the purpose.]
Contd. to page…………. (2)
:-2-:
18)
The Tender document and other relevant particulars (if any) may be seen by the intending tenders during the office hour in the
office of the Executive Engineer, Nadia Construction Division, P.W.D. on receipt of permission from the Executive Engineer, Nadia
Construction Division, P.W.D.
19)
Permission will not be given to a particular firm for more than one work against this N.I.T.
20)
Conditional Tender will be liable for rejection.
21)
Time / Cost over-run and consequent cost escalation for any material, labour, POL etc. will not be allowed.
22)
No mobilization advance / secured advance will be allowed.
23)
In case of inadvertent typographical mistake found in the specification price schedule of rates, the same will be treated to be so
corrected as to confirm with the prevailing relevant schedule of rates and / or technically sanctioned estimate.
24)
The intending tenderer is required to quote the rate in his own hand writing in figure as well as in words mentioning percentage
above / below or AT PAR on the basis of the relevant price schedule of probable items with approximate quantities.
25)
Contractor shall have to comply with the provisions of (a) the Contract Labour (Regulation Abolition) Act, 1970 (b) Apprentice
Act 1961 and (c) Minimum Wages Act, 1948 or the modification thereof or any other laws relating thereto and the rules and order
issued there under from time to time.
26)
The payment will be made as and when fund will be available from the concerned source. No Claim, whatsoever, for delay in
payment, if any will be entertained. Contractors are requested to quote their rate accordingly.
27)
The intending tenders will have to enclose a Xerox copy of PAN Card of Income Tax, Professional Tax Clearance Certificate, Vat
Registration Certificate etc. after self-attestation with full signature at the time of dropping of the Tender.
28)
Registered Unemployed Engineer’s Co-Operative Societies Ltd. and registered Labour Co.-Operative Societies Ltd. will have to
enclose a Xerox copy of current Audit Report, No objection certificate in support of their registration, Bye Laws, PAN Card of Income Tax,
Professional Tax Clearance Certificate, VAT Registration Certificate etc. copy after self-attestation with full signature at the time of
dropping of tender paper.
29)
Representation in Tender in connection with tender submitted by Co.-Operative Societies :The Chairman and the Secretary or three directors including either the Chairman or the Secretary shall execute and sign all deeds,
documents. tender papers as per act or the Bye -Laws of the Co-operative Societies, failing which the tender will be liable for rejection. The
copy of the last Audit Report (full) including copy of the minutes of last A.G.M has to be submitted along with application for verification
of the authority.
30)
In case of partnership firm, the intending tenderer shall have to produce authentic document in respect of firm registration obtained
from the Registrar of Firms. West Bengal Pursuant to the Indian Partnership Act 1932 (Act IX of 1932).
31)
No credential will be considered unless it is supported by payment certificate, work -order and completion certificate mentioning
the date of completion issued by the competent authority not below the rank of Executive Engineer or similar rank. Priced Schedule of the
work should also be submitted at the time of submission of application so that the quantum of similar nature of work may be verified before
issue of tender paper. If due to ambiguity, quantum of similar nature of work cannot be ascertained clearly from completion certificate /
credential documents, it will be verified from the price schedule of work.
32)
Periodical quality test of materials supplied by the agency and final products are to be made as per guidance of schedule of
P.W.D./IS/I.R.S./M.O.R.T. & H at contractor’s cost. Normally quality control test of supplied materials / final products will be done in the
Department Laboratory. Otherwise testing of materials / final products will be done from the outside recognized laboratory at the discretion
of Engineer-in-Charge. In both the cases necessary cost of testing charges will be borne by the agency.
33)
All tenderer or his authorized representative is requested to present personally during the opening of the tender and to sign tender
opening register as witness.
34)
No person will be allowed to quote rate on the basis of Legal Power of Attorney conferred to him by the Firm / Agency except in
circumstances where necessary Govt. approval has been obtained.
Contd. to page…………. (3)
:: - 3 - ::
35)
During the process on subsequently if it is found that the. Documents submitted by the intending tenderers during their application
for obtaining tender paper are false, fictitious etc. then the person / agency will be liable to criminal offence and action will be taken
accordingly.
36)
The Tender Inviting Authority is final and binding regarding decision of Tender paper. The Tender inviting Authority also
reserved the right to issue or rejection any or all of the Tender as received without assigning any reasons. The tender
inviting authority also reserves the right to cancel the N.I.T. without showing any reasons.
37)
The successful contractors will have to abide by the provision the West Bengal Contract Labour (Regulation and Abolition)
Rules, 1972 and obtain License from the appropriate authority as persaid Act. And Rules, if applicable in this case.
38)
In case of any Bandh and Holiday falls on the last date scheduled for Receipts of tender, the same may be treated operative just
after the next working day upto the time as scheduled.
39)
A Cess @ 1% of the Gross Bill value of the work will be deducted from the bill so as to remit to the “West Bengal Buildings
and other Construction workers Welfare Board” constituted under the Labour Department’s Notification No.-1182-1R, dated
20.09.2005 and in accordance with circular No. 599 A/4M-28/06 dated 27.09.2006 of P.W.D. Accounts Branch.
Tender received along with Earnest Money in any shape other than specified above viz. in the form of
cheque/cash/BG/NSC/KVP will not be accepted / considered and will be declared informal at the time of opening the tenders.
40)
41)
The successful contractors will have to produce original documents to the estimating section for checking and should be kept
at least for one day if necessary, before issuing of work order.
42)
In case of partnership firm registered partnership deed shall have to be produced along with application.
43)
During construction works of road, which is open to traffic, suitable barriers with security arrangement are to be kept to
segregate the area of work. Red lights are to be provided at such barriers at night during poor visibility night Chowkiders have
to be considered and it should be included in the rate quoted by the firm during submission of tender.
Executive Engineer
Nadia Construction Division (P.W.D.)
Memo No. 476 (27)
Dated, Krishnagar,
17/03/2015
Copy forwarded for information to giving the publicity through Notice Board to the:Sabhadhipati, Nadia Zilla Parishad with 4 (four) copies for information.
Superintending Engineer, Central Circle, P.W.D. (in duplicate) / District Magistrate, Nadia /Superintendent of Police, Nadia /
Executive Engineer (P.W.D.) Berhampore Division No.I / II / Nadia Division / Nadia Highway Division/N.H. Division No.VI / Social
Sector, Krishnagar / Assistant Engineer (P.W.D.), Ranaghat Sub-Division, Krishnagar Constn. Sub-Division No.- I, II, III , Kalyani
Construction Sub-Division, Nadia Contractors Association, Krishnagar /Nadia District Central Engineers’ Co-operative Society Ltd., P.O.
Krishnagar, Dist Nadia/Federation of Labour Co-operative Association, M.M. Ghosh Street, (Near Foara More), Krishnagar, Nadia / Nadia
Progressive Contractors Welfare Association, Kalinagar Kaltala, Bagula Road, Krishnagar, Nadia/ The Superintendent, Nabadwip S.G.
Hospital.
Directors of Information, Information and Cultural Affairs Department, Govt.of West Bengal, Writers’ Building, Kolkata- 1 for
information, wide publicity in reading Dailies both English & Bengali, one publication in Sunday paper is requested.
Divisional Accountant/Cashier/Office Estimator/ Notice Board /Office Files.
District Information Officer, Nadia, Krishnagar for information and necessary action.
Executive Engineer
Nadia Construction Division (P.W.D.)
Krishnagar, Nadia.
List of works for N.I. T. No. 16 of Executive Engineer (P.W.D.), Nadia Construction Division, Krishnagar, Nadia during 2014-15
Sl.
No.
1
1.
Name of Works
2
'Urgent repair and maintenance works
to proposed Blood Bank Building at
Nabadwip State General Hospital
under Nadia Construction Division,
P.W.D. during 2014 - 2015. (Civil
Works )
Estimated
amount put
to Tender in
Rs.
3
3,36,253.00
Earnest
money
( in Rs.)
Cost of W.B. F. 2911-ii &
other documents
Eligibility of Contractors
Time of
Completion
4
6750.00
5
No fees to be deposited by
the Bidder initially but to be
submitted by lowest Bidder
on Demand.
6
Experienced contractors
having credential of similar
nature of Govt. works valued
minimum 40% in a single
work of estimated amount
put to tender. Last 5 (Five)
years credential will be
considered as valid from the
date of issue of this N.I.T.
7
30 (Thirty)
days.
Executive Engineer (P.W.D.)
Nadia Construction Division
Krishnagar, Nadia
N.I. T. No. 16 of Executive Engineer (P.W.D.), Nadia Construction Division, Krishnagar, Nadia during 2014-15
Tender No.
Date of
Publishing
1
N.I. T. No. 16 of
Executive Engineer
(P.W.D.) , Nadia
Construction Division,
Krishnagar, Nadia
during the year 2014-15
2
17.03.2015
Inviting Authority
Brief Description of work
3
4
Executive Engineer, P.W.D., 'Urgent repair and maintenance works to proposed Blood Bank
Nadia Construction Division, Building at Nabadwip State General Hospital under Nadia
Krishnagar, Nadia.
Construction Division, P.W.D. during 2014 - 2015. (Civil Works )
Executive Engineer (P.W.D.)
Nadia Construction Division
Krishnagar, Nadia.
Last Dates &
time limit for
receipt of
Tender
5
30.03.2015
upto 2.00
P.M.
Office of the Executive Engineer (P.W.D.),
Nadia Construction Division ,
Arabindo Sarani
P.O. Krishnagar, Dist. Nadia
N.I.T. NO. 16 OF 2014-15 OF E.E., N.C.D. (P.W.D.)
Priced schedule for probable item of works, quantity ,unit, rate and amount for the work of ''Urgent repair and maintenance works to
proposed Blood Bank Building at Nabadwip State General Hospital under Nadia Construction Division, P.W.D. during 2014 - 2015. (Civil
Works )''
Description of Items
Sl.
No.
Quantity
Unit
R & B SCHEDULE
Rate ( In Rs.)
Amount (Rs)
2
19.00
380.00
2
740.00
2220.00
606.00
1727.00
2
22.00
3762.00
2
968.00
12584.00
2
794.00
7146.00
2
799.00
5593.00
2
821
3284.00
1
Stripping off worn out plaster and raking out joints of walls, celings etc. upto any
height and in any floor including removing rubbish within a lead of 75m as directed.
20.00
m
2
125 mm. thick brick work with First class bricks in cement mortar (1:4).
In First Floor
Washing and cleaning with oxalic acid powder using 33 gms./sq.m.
(b) Floor/ dado other than marble
Grinding to marble / mosaic floor including remaining stone, if necessary, after
cutting with manual labour / machine, where necessary
3.00
m
285.00
%m
171.00
m
13.00
m
9.00
m
3
4
5
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with
the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of
each tile & finishing the joints with white cement mixed with colouring oxide if
required to match the colour of tiles including roughening of concrete surface, if
necessary or by synthetic adhesive & grout materials etc.
(A) Floor.
With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side
of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m.
(b) Area of each tile above 0.09 Sq.m.
(ii) Other than Coloured decorative including white.
In Ground Floor.
2
(B) Wall.
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side
of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m.
(a) Area of each tile upto 0.09 Sq.m.
(ii) Other than Coloured decorative including white.
Ground Floor
In First Floor.
7.00
6
Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove,
wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2)
including grinding or polishing as per direction of Engineer-in- Charge in
Ground Floor.
(b) Slab Thickness above 25 mm and upto 37.5 mm.
In First Floor.
4.00
m
7
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with
M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws
and lugs in ground floor.
(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
In Ground Floor.
0.40
Qntl
9051
3620.00
In First Floor.
0.30
Qntl
9141.51
2742.00
m
8
9
Supplying, fitting and fixing windows and ventilators with or without integrated grills
conforming to IS 1038-1975 and manufactured from rolled steel sections conforming
to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs
locking bracket, handle plate etc, including hoisting in position, straightening if
required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting
holes and mending good damages to match with existing surface complete in all
respect excluding glazing.
In Ground Floor.
(b) Openable steel windows as per IS sizes with side hung shutters and horizotal
glazing bars with/without fixed type ventilators.[The extra rate admissible for the
openable portion only]
4.00
m
(iv) Two point nose steel handle including fitting and fixing.
In Ground Floor.
(vi) Steel peg stay 300 mm long including fitting and fixing.
In Ground Floor.
Easing and oiling, cleaning collapsible gate and repairing to locking arrangements.
3.00
2
2031.00
8124.00
Each
41.00
123.00
6.00
Each
29.00
174.00
11.00
m
17.00
187.00
2
10
Wood work in door and window frame fitted and fixed in position complete including
a protective coat of painting at the contact surface of the frame exluding cost of
concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto
three decimals).
(e) Sal : Malayasian.
In First Floor.
0.10
Cum
87600.00
8760.00
11
(i) Brass floor door stopper.
In First Floor.
5.00
Each
134.00
670.00
12
i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed
complete.
(c) Light (I.S.I. size 4).
In First Floor.
3.00
Each
1443.00
4329.00
13
Anodised aluminium barrel / tower / socket bolt (full covered) of approved
manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with
cadmium plated screw.
(iii) 100mm long x 10mm dia. bolt.
2.00
Each
61.00
122.00
14
Anodised aluminium butt hinges of approved quality manufactured from extruded
section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with
cadmium plated screws:
(iv) 75 x 63 x 3.2mm.
In Ground Floor
3.00
Each
72.00
216.00
15
Anodised aliminium D-type handle of approved quality manufactured from extruded
section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete.
(a) With continuous plate base (Hexagonal / Round rod)
(vi) 150 mm grip x 10 mm dia rod.
2.00
Each
111.00
222.00
16
Panel (made of single plank) of door and window shutters to design as directed: In
Ground Floor
(Payment to be made on area of exposed new work). (In case of non-supply of single
plank penal rate of reduction to a maximum of 30% will be made).
(ii) 19mm thick panel of 30cm to 45cm width.
(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
1.00
m
1223.00
1223.00
2
17
Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle
board of approved make and brand as per direction of Engineer - in - Charge of
requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS:
848 - 1974 (excluding the cost of supporting frame work and teak wood battens /
lipping)
In Ground Floor.
(B) Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 - 1990.
i) One side decorative laminated.
(b) Interior Grade.
9mm thick.
11.00
m
18
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as
per approved design with glass fibre reinforced plastic moulded skins and a special
sandwich core, so as to impart monolitaheic composite structure as per approved
technology of Department of Science and Technology (DST) to satisfy IS:4020 door
testing performance criteria.
(ii) 25 mm thick
2.00
m
19
Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as
per approved section with glass fibre reinforced plastic moulded skins and a special
sandwich core, so as to impart monolitaheic composite structure as per approved
technology of Department of Science and Technology (DST) to safisfy IS: 4020 door
testing performance criteria..
(ii) 66mm x 70mm
5.00
Mtr.
20
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding
off or chamfering corners as directed and raking out joints including throating, nosing
and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost
of chipping over concrete surface]
(i) With 1:6 cement mortar.
(c) 15 mm thick plaster.
In First Floor.
20.00
m
21
Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc.
10.00
m
22
White washing including cleaning and smoothening surface thoroughly.
All floors :
(a) One coat.
112.00
%m
23
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or
cencrete surface old or new surface to receive decorative textured(matt finish) or
smooth finish acrylic exterior emulsion paint including scraping and preparing the
surface throughly, complete as per manufacturer's specification and as per direction
of the EIC.
(a) One Coat
In Ground Floor
In First Floor
202.00
%m
328.00
%m
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per
manufacturer's specification and as per direction of EIC to be applied over acrylic
primer as required. The rate includes cost of material, labour, scaffolding and all
incidental charges but excluding the cost of primer.
(Two Coat)
a) Normal Acrylic Emulsion.
In Ground Floor
202.00
m
In First Floor
328.00
m
24
25
(a) Priming one coat on timber or plastered surface with synthetic oil bound primer
of approved quality including smoothening surfaces by sand papering etc.
In Ground Floor.
96.00
m
2
983.00
10813.00
2
3046.00
6092.00
525.00
2625.00
2
155.00
3100.00
2
38.00
380.00
2
1358.00
1521.00
2
3404.00
6876.00
2
3476.00
11401.00
2
73.00
14746.00
2
73.72
24180.00
2
41.00
3936.00
(b) Priming one coat on steel or other metal surface with synthetic oil bound primer
of approved quality including smoothening surfaces by sand papering etc.
15.00
m
(A) Painting with best quality synthetic enamel paint of approved make and brand
including smoothening surface by sand papering etc. including using of approved
putty etc. on the surface, if necessary :
(a) On timber or plastered surface :
With super gloss (hi-gloss) (iv) Two coats (with any shade except white)
In Ground Floor.
96.00
m
(b) On steel or other metal surface :
With super gloss (hi-gloss) (iv) Two coats (with any shade except white)
15.00
m
27
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and
putty complete. (In all floors for internal wall & upto 6 m height for external wall)
(i) 3 mm thick (weighing 7.4 kg/Sq.m)
8.00
m
28
Renewing worn out putty of glass panes :
(a) Panes not exceeding 0.2 Sq.m
30.00
(b) Panes exceeding 0.2 Sq.m but not exceeding 0.5 Sq.m
29
30
2
31.00
465.00
2
89.00
8544.00
2
86.00
1290.00
2
611.00
4888.00
Each
35.00
1050.00
10.00
Each
53.00
530.00
Supplying concealed type heavy duty PVC headed aluminium tower bolt for double
leaf doors as per approved make and brand as per direction of Engineer-in-Charge.
(c) 300 mm long.
4.00
Each
88.00
352.00
Supplying bubble free float glass of approved make and brand conforming to IS: 28351987.
v) 6mm thick clear glass.
5.00
m
2
726.00
3630.00
vi) 6mm thick coloured / tinted / smoke glass.
5.00
m
2
789.00
3945.00
31
Supplying 4 lever mortice lock or any approved make and brand as per direction of
the Engineer- in -Charge.
i) 150 mm.
2.00
Each
451.00
902.00
32
(A) Supplying Aluminium casted body hydraulic door closer as per I.S.I.
2.00
Each
757.00
1514.00
(C) Supplying Heavy Duty Aluminium Handle (EBCO Type)
(Natural White).
4.00
Each
114.00
456.00
(D) Supplying Aluminium casted body Butt Hinge (KOBRA type).
(Natural white)
6.00
Each
68.00
408.00
Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf
Aluminium swing door of all aluminium sections viz door frame ( top and side frame),
shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium
Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized
conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat,
angle screws etc. including labour charges for fitting and fixing of aluminium door
with door spring,/aluminium hinges, glass / Panel board all complete as per
architectural drawings and direction of Engineer-incharge. (Excluding cost of glass/
panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and
locking arrangment etc)
10-12 Micron thickness Annodizing film
Natural white
(unit wt of to Top & side frame @1.366 kg/m; top rail @ 1.296 kg/m; bottom rail @
1.974 kg/m; lock rail @ 1.590 kg/m; door vertical @ 1.412 kg/m; glazing clip @ 0.167
kg/m.)
35.00
Kg
430.00
15050.00
26
33
34
Supplying, fitting & fixing of Aluminium fixed partion wall of all aluminium sections viz
top, bottom and side member, intermediate member , glazing clip made of
Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized
conforming to IS:1868-1983, fitted with all other accessories viz. EPDM gusket,cleat,
angle screws etc. including labour charges for fitting and fixing of aluminium fixed
partition wall with glass / panel board all complete as per architectural drawings and
direction of Engineer-in-charge. (Excluding cost of glass/ panel board)
10-12 Micron thickness Annodizing film.
Natural white.
a) for unsupported length of vertical member upto 1.50m. height of both ends of
vertical member restrained but panel with in 0.90 sqm.
(unit wt of Top, bottom & side member @1.366 kg/m ; intermediate member @
1.443 kg/m; glazing clip: 0.167 kg/m respectively)
125.00
Kg
35
Supplying, Aluminium Grill with F channel frame of approved make and brand having
ultimate tensile strength of 19 Kg/Sq.m. and modulus of elasticity 7000 kg/ sq.m.,
with 15 micron anodising fitted & fixed with necessary screws etc. complete as per
direction of Engineer-in-charge.Grill made with 10 mm wide and 5.2 mm thick
aluminium sheet having expansion width of 66.00 mm and weight not less than 3.26
Kg/Sq.m.
10.00
m
3.00
36
S & P SCHEDULE
Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories,
specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket,
reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes,
making threads, fitting, fixing etc. complete in all respect including cost of all
necessary fittings as required, jointing materials and two coats of painting with
approved paint in any position above ground. (Payment will be made on the centre
line measurements of total pipe line including all specials. No separate payment will
be made for accesories, specials. Payment for painting will be made seperately.)
(A) For Exposed Work
(a) (ii) 15 mm dia. medium quality
436.00
54500.00
1859
18590.00
Mtr.
220.00
660.00
2
37
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best
quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq.
cm.).
(Note: Item (i),(ii) and (iii) to be done as per specific direction of the Engineer-incharge.)
(ix) 15 mm dia
4.00
Each
631.00
2524.00
38
Supplying, fitting and fixing bib cock or stop cock.
(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model Tropical / Sumthing Special of ESSCO or similar).
4.00
Each
689.00
2756.00
(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model Tropical / Sumthing Special of ESSCO or similar).
12.00
Each
629.00
7548.00
(g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of
approved brand and make, spray painted and tested to 21 kg per sq. cm.
(i) 15 mm
2.00
Each
195.00
390.00
Supply of PVC pipes & fittings (medium duty) conforming to ASTMD - 1785 and
threaded to match with GI Pipes as per IS : 1239 (Part - I).
(A) PVC Pipes
(Dia)
50 mm
3.00
Mtr.
298.00
894.00
(C) Elbow
(Dia)
50 mm
Labour for dismantling G.I. pipe with fittings.
(i) 15 mm
2.00
Each
119.00
238.00
6.00
Mtr.
6.00
36.00
39
40
41
Refixing G.I. pipe with fittings after cleaning where necessary.
(i) 15 mm
6.00
Mtr.
6.00
36.00
42
Removing chokage in G.I. pipe including cleaning pipe.
(i) 15 mm
6.00
Mtr.
7.00
42.00
43
Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good all
damages with cement concrete(4:2:1) with jhama chips and cement plaster (6:1) to
match with and curing.
(i) 15 mm
15.00
Each
28.00
420.00
44
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S.
specification with P.V.C. fittings complete,C.I. brackets including two coats of painting
to bracket etc.
4.00
Each
1181.00
4724.00
45
Wash basin vitreous china of approved make (without fittings) supplied,fitted and
fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including
two coats of painting of C.I. brackets
(v) Surgeon's wash basin 650 mm X 450 mm
1.00
Each
4896.00
4896.00
46
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with
both ends coupling with heavy brass C.P. nut, 15 mm dia.
(ii) 450 mm long
2.00
Each
96.00
192.00
47
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC
coupling at one end fitted with necessary clamps.
(iii) 900 mm long
6.00
Each
89.00
534.00
48
Supplying, fitting and fixing Waste fittings complete.
(a) C.P. over brass
(ii) 32 mm
1.00
Each
245
245.00
49
Supplying, fitting and fixing pillar cock of approved make.
a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical /
Sumthing Special of ESSCO or similar brand).
4.00
Each
713.00
2852.00
50
Cleaning wash basin/ sink with acid.
4.00
Each
16.00
64.00
51
Supplying, fitting & fixing H.C.I. bend without door conforming to I.S.S. including
jointing complete and painting two coats to the exposed surface with approved paint
complete. (Payment of Painting will however be paid seperately).
(a) With valamoid joints including sealing the top with cement mortar (4:1)
(ii) 100 mm dia.
4.00
Each
568.00
2272.00
52
Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989 / 1970 and
1729 / 1964 including lead caulked joints and painting two coats to the exposed
surface. (Painting to be paid seperately).
(A) 'P' Trap
(iii) 100 mm
Supplying, fitting and fixing cast iron extension pipes for using in Traps only
(connector) conforming to I.S.3989/1970 and 1729/1964 including lead caulked joints
complete and painting two coats to the exposed surface with approved paint
complete. (Payment of Painting will however be paid seperately).
(iii) 100 mm X 300 mm
4.00
Each
1094.00
4376.00
4.00
Each
607.00
2428.00
54
Removing chokage of H.C.I. or S.W. pipe with split bamboo.
(a) Underground.
12.00
Mtr.
11.00
132.00
55
Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous
chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding
cost of concrete for fixing).
(i) 580 mm X 440 mm
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous
chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75
mm wooden blocks complete.
(i) 590 mm X 390 mm X 380 mm.
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary
fixing materials and clamps complete.
i) Polythene Flush Pipe.
4.00
Each
2026.00
8104.00
4.00
Each
2990.00
11960.00
4.00
Each
181.00
724.00
53
56
57
58
Supplying, fitting and fixing glass shelf with aluminium guard rails.
(a) Ordinary type with 5.5 mm sheet glass.
(i) 450 mm X 125 mm
4.00
Each
432.00
1728.00
59
Supplying, fitting and fixing towel rail with two brackets.
(a) C.P. over brass
(ii) 25 mm dia. and 600 mm long
4.00
Each
554.00
2216.00
60
Dismantling Orissa pattern W.C. including taking out of base concrete, if necessary,
complete.
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size)
excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.
a) Pakur Variety
In Ground Floor
4.00
Each
45.00
180.00
0.50
CuM
6071.82
3036.00
62
Washing and cleaning with oxalic acid powder using 33 gms./sq.m.
(b) Floor/ dado other than marble
35.00
%m
2
606.00
212.00
63
White washing including cleaning and smoothening surface thoroughly.
All Floors :
(a) One coat.
62.00
%m
2
1358.00
842.00
61
TOTAL
336253.00
(Rupees Three Lakhs Thirty Six Thousand Two Hundred Fifty Three
only)
RECOVERY RATE OF GOVT. MATERIALS :
1. STEEL: Rs. 53,900.00 / M.T.
2. CEMENT : Rs. 8,100.00 / M.T.
Executive Engineer (P.W.D.)
Nadia Construction Division
Krishnagar, Nadia.