Acorn Technologies Inc hellaPHY® CE Product Brief

Transcription

Acorn Technologies Inc hellaPHY® CE Product Brief
Product Brief
Overview: optimal LTE PHY performance
hellaPHY® CE is the industry’s most advanced LTE channel estimation IP core. Upgrading your receiver
to hellaPHY® CE allows for optimal LTE PHY performance. In many cases, hellaPHY® CE increases the
operational modulation-coding-set (MCS) by one or more levels. This increases spectral efficiency
by up to 60% and beyond. The hellaPHY® CE IP Core is a mix of flexible software and low-power
optimized hardware accelerators. With its carefully crafted interface, hellaPHY® CE is ready to be
integrated into your design today with minimal effort.
Key features and benefits
Near-perfect-CSI performance
One or more MCS level improvement
Greater than 60% spectral efficiency gain
Robustness against cyclic prefix violations
Optimized for all 3GPP R11+ antenna ports
Massive cell edge noise/interference rejection
Reference signal
generation
Optimized for LTE Broadcast eMBMS
Integrated timing, Doppler, SNR estimation
Enables accurate OTDOA-based location applications
Optimized software/hardware architecture
Maximizes the number of concurrent VoLTE users
Advanced channel tracking
OTDOA
To higher
layers
RF
Timing
A/D
Doppler
Delay spread
hellaPHY CE
SNR
RF
HARQ
CQI
PMI
RI
Advanced receiver technologies maximizing spectral
efficiency are central to the 1000x Data Challenge.
The advanced channel estimation that comes with
hellaPHY® CE provides a solid foundation to build
other advanced receiver components such as interference cancellation, massive MIMO, etc.
CE
A/D
Acorn Technologies IP Core
CP
removal
FFT
CRC
Rx
Detector
with
IC
CP
removal
FFT
Turbo
decoder
Figure 1 depicts a receiver upgraded with hellaPHY®
CE. Besides providing industry-leading channel estimation, hellaPHY® CE outputs other modem-critical
components such as timing, SNR, delay spread and
Doppler estimation. hellaPHY® CE timing estimates
not only improve performance by avoiding intersymbol/inter-carrier interference, but also enable
fully spec compliant LTE OTDOA-based positioning
features.
Rx
User data
Figure 1 – A receiver upgraded with hellaPHY® CE.
Acorn Technologies, Inc.
1200 Prospect Ave
La Jolla, CA 92037
Acorn Technologies is proud to announce its latest product in the field of advanced OFDM receiver
technology: hellaPHY® CE is the new implementation paradigm providing optimal PHY performance
in mobile chipsets. Designed for LTE—and applicable to any OFDM standard—hellaPHY® CE consistently
provides differentiating performance against known
channel estimation solutions. Dramatic performance
gains with hellaPHY® CE are observed under challenging channel conditions beyond LTE standard testing.
These conditions are expected to significantly affect
network capacity.
1
Copyright © 2014 All Rights Reserved
contact: [email protected]
+1.858.551.1314
Product Brief
What is included
DSP and RTL source
Documentation
Matlab functional model
Integration support
Verification test benches
FPGA/ASIC synthesis scripts
Matlab fixed-point bit-exact model
Tapeout support
The hellaPHY® CE IP Core consists of a symbol engine
cluster optimized to the hellaPHY® algorithms. The
cluster is controlled by a software layer that interfaces
to the host system. This modular design allows for
custom tailoring to the target platform. See Figure 2.
RTL
Symbol engine
hellaPHY CE
DSP management
Data / config
Internal
interface
DSP core
library
Control
HW Acc 1
HW Acc 2
The hellaPHY® CE IP Core has a clean interface designed for simple integration. Acorn Technologies offers support in the integration process, including verification test benches, synthesis scripts, documentation, Matlab functional and bit-true fixed-point models. The impact to tapeout schedule is minimal, particularly when considering the broad capabilities that
hellaPHY® CE offers the modem.
HW Acc N
Symbol engine
Control
HW Acc 1
HW Acc 2
HW Acc N
Algorithm-wise, hellaPHY® CE is unlike anything on
the market. State-of-the-art solutions are based
on frequency-domain pilot filtering with Wiener optimizations. However, in practice, these schemes are
suboptimal from statistical model mismatch. Moreover, complexity constraints (filter length) limit how
well these schemes exploit available pilot information. hellaPHY® CE is a radical departure from traditional approaches. Drawing inspiration from the
latest in machine learning, hellaPHY® CE intelligently
computes the time-domain channel impulse response.
This leads to a final channel estimate of unparalleled
quality. hellaPHY® CE completely sidesteps the traditional complexities involved with filtering, allowing it to make use of 100% of available pilot energy.
hellaPHY® CE dynamically optimizes itself to the channel on a per-symbol basis, requiring no channel statistics, thereby avoiding classic model mismatch issues.
®
Figure 2 – hellaPHY CE IP Core symbol engine cluster.
Fractional throughput
0.9
0.8
0.7
hellaPHY CE
Perfect CSI
3GPP vendor data
3GPP 36.101 min perf
0.6
0.5
3
4
5
6
7
SNR (dB)
hellaPHY® CE is available today. Please contact Acorn
Technologies for more information.
Figure 3 – hellaPHY® CE achieves near-perfect-CSI performance.
About Acorn Technologies
Acorn Technologies engages in the invention and development of advanced technologies for wireless telecommunications for 4G and beyond. In the field of semiconductors, Acorn is developing nanotechnologies focused on performance and scaling.
Acorn Technologies, Inc.
1200 Prospect Ave
La Jolla, CA 92037
2
Copyright © 2014 All Rights Reserved
contact: [email protected]
+1.858.551.1314