BFP009T - The Crest Company

Transcription

BFP009T - The Crest Company
Step 4: Tilt Adjustment
1. Installation of this TV Wall Mount will be easier with two people.
TV Wall Mount
Check your TV Wall Mount is secure and safe to use at regular intervals (at least every three months).
PULL TV
SAFETY FIRST
BFP009T
1.You may now adjust the angle of your TV for the best viewing angle. Gently push or pull your TV from
the top or bottom of the TV screen. The tilt angle can be adjusted between 10˚ down and 5˚ up (see Figure 8).
PUSH TV
2. Some images in this guide may vary slightly from the actual
components supplied.
Tilt Movement
3. Ensure this instruction manual is completely read and
understood before attempting installation.
This TV Wall Mount allows you to
tilt your TV up and down
4. This TV Wall Mount MUST NOT be installed solely in
plasterboard, fibre cement and similar surfaces.
5. This TV Wall Mount MUST be installed in sound supporting
structures such as those made of timber, steel or masonry
using appropriate fasteners.
Compatible T
V Size
This TV Wall Mount fits 17–47”
17–47” (43–119cm) TV screens
6. The supporting structure must be capable of sustaining
the combined weight of the TV Wall Mount and the display
otherwise the structure must be reinforced.
Maximum M
ounting Pattern
200x200mm
Figure 8
HOLDS
30kg
220
This TV Wall Mount has a mounting
hole pattern up to 200x200mm (HxW)
7. The
fasteners supplied in this hardware pack allow for fixing
into timber and masonry only. If installing into a supporting
structure made of steel, appropriate fasteners must be used
and sourced from an appropriate supplier.
Maximum T
V Weight
This TV Wall Mount supports TVs
weighing up to 30kg
8. U
se appropriate tools and safety equipment and ensure
adequate ventilation during installation.
200
100
9. If uncertain about any aspect of installation, contact
The Crest Company or an installation professional.
75
50
10.Please retain these instructions for future reference.
Hardware Kit Contents
Item Description
220
200
75
100
50
75
0˚
-15˚
Qty
Item
Description
M-A
M4 x 14mm Bolt
4
M-G
D6 Washer ø6.3 xø16
4
M-B
M5 x 14mm Bolt
4
M-H
D8 Washer ø8.3 x ø16
4
M-C
M6 x 14mm Bolt
4
M-I
Small Spacer
8
M-D
M8 x 20mm Bolt
4
W-A
Lag Bolt ST5.5 x 50mm
2
M-E
D4 Washer ø4.5 x ø10
4
W-B
Concrete Anchor
2
M-F
D5 Washer ø5.5 x ø12
4
Tools Required
Proudly brought to you by:
5 YEAR WARRANTY
Olbertz Holdings Pty Ltd ACN 010 003 933 trading as The Crest Company of 165 South Pine Road, Brendale, Queensland, 4500, Ph: 1800 812 261,
www.crest.com.au, warrants that if this Crest product purchased by you from The Crest Company or a retail outlet is found by The Crest Company to be defective
in workmanship or materials within 5 years of the date of purchase, The Crest Company will (at its election) either repair that product, replace the product, supply
an equivalent product or pay the costs of repairing or replacing the product or acquiring an equivalent product.
In order to claim under this warranty, you must contact The Crest Company and return to The Crest Company (via our nominated reply paid address) the product
and its components and proof of purchase (including the date and location of purchase) so that The Crest Company can verify the defect and your purchase.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure. The benefits given by this warranty are in addition to other rights and remedies which you
may have under a law in relation to the goods or services to which the warranty relates.
PO Box 5658 Brendale
QLD Australia 4500
Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED
1323
This limited warranty will not extend to or cover any expenses associated with removing, demounting the original product or installing the repaired, replaced or
equivalent product or all or any of its components, you must bear these expenses. It also does not cover damage or loss resulting from intentional or unintentional
misuse of, tampering with, alterations to or incorrect installation of this product or use of this product for purposes other than that for which it is designed or in a
manner inconsistent with the product’s instructions. This limited warranty also does not apply to damage or loss resulting from fair wear and tear or events beyond
The Crest Company control including but not limited to natural disasters.
QTY
DRYWALL INSTALLATION (TIMBER SUPPORTS):
MASONRY INSTALLATION:
•
•
•
•
•
•
•
•
•
•
•
•
Adjustable spanner/socket set
Philips head screwdriver
Power drill
High speed 4mm drill bit
Stud finder
Spirit level and pencil
Adjustable spanner/socket set
Philips head screwdriver
Power drill with hammer function
8mm masonry drill bit
Spirit level and pencil
Hammer
Step 1: Attach Lag Bolts to Wall
Step 2: Attach TV Wall Mount to TV
A. Installing in Drywall (Timber Supports)
1.Using a second person for assistance, lay your TV face down on something soft so as not to scratch the TV screen.
2.Check the back of your TV to find the appropriate mounting pattern.
3.Sort through the provided bolts (M-A to M-D) until you find the correct size that easily fits into the back of your TV and fits
snugly (the bolt must turn at least 3 full turns, do not tighten). If you feel resistance stop immediately and select a smaller bolt.
The Crest Company is not responsible for any damage caused by screwing the bolt too far into the back of the TV.
Once you have selected the correct bolts, find the corresponding washers (M-E to M-H). If no bolts fit, you will need
to go to your local hardware supplier to find the correct bolt and washer sizes.
4.Once the bolts and washers have been identified, gently put your TV Wall Mount on the back of the TV so that the
mounting holes are showing the TV Wall Mount. If the back of your TV is curved or recessed (see Figure 5) you will need
to use a hole spacer (M-I) to clear the space. If using spacers you will now need to use longer screws. Remember that the
bolt needs to turn at least 3 full turns.
5.Using the correct mounting bolt size and length, insert through the corresponding washers (M-E to M-H)
to attach TV Wall Mount to rear of TV (see Figure 6). To avoid damaging TV, do not overtighten bolts.
1.Locate the centre of timber stud using a stud finder
(NOTE: You must use the centre of the stud to avoid cracking or splitting the timber during installation).
2.Mark fixing holes over stud centres 76mm apart (see Figure 1). Ensure Wall Plate holes are level.
3.Pre-drill holes to a depth of 40mm using a high speed 4mm drill bit. If installing in hardwood, larger diameter and deeper
holes may be required.
4.Insert lag bolts (W-A) through round D5 washers (M-F). Do not tighten and leave enough room for the TV Wall Mount to
slide over the top of the lag bolts later on (see Figure 2 and 7).
M-F
W-A
Using hole spacers for TVs
WITH A Curved OR RECESSED BACK
W-A
Figure 1
Figure 2
M-A, M-B, M-C
M-F
B. Installing in Masonry
1.Mark fixing holes 76mm apart (see Figure 3). Ensure Wall Plate is level.
2.Ensure you have a minimum of 35mm of actual concrete/brick thickness in the hole for the anchors. Do not drill into mortar
joints. Pre-drill holes to a depth of 50mm using an 8mm masonry drill bit. Clean out holes.
3.Fully insert the concrete anchors (W-B) into the drill holes. Tap in with hammer if required.
4.Insert lag bolts (W-A) through round D5 washers (M-F). Do not tighten and leave enough room for the TV Wall Mount
to slide over the lag bolts later on (see Figure 4 and 7).
W-B
M-F
W-A
M-E, M-F, M-G
M-I
Figure 3
Figure 4
W-A
M-E, M-F,
M-G, M-H
TV
Figure 5
W-B
M-F
TV
Figure 6
M-A, M-B,
M-C, M-D
Step 3: Hook TV Wall Mount over Lag Bolts
1. Using a second person for assistance, carefully lift TV and hook the TV Wall Mount over the lag bolts and
slide down slowly (see Figure 7).
2.Make sure the TV is securely hooked before releasing your hold.
Figure 7