DS450e Quick Start Guide - Delphi Europe Service Operations

DS450e
Quick Start Guide
Congratulations on the purchase of your new Delphi DS450e !
We have detailed below a few of the top features to get you started as quickly as possible.
1 USB 2.0 connector
Tablet layout
2 Power connector
12 11
3 Dock connector
10
4 Micro-HDMI™ connector
5 Micro-SD card slot
13 15 14
1
13
2
9
6 Micro-SIM card slot
8
7 Emergency reset hole
8 Volume control buttons
7
6
9 Combo audio connector
10 Rear-facing camera with flash
5
16
11 Power button
4
12 Screen rotation lock button
13 Microphones
14 Front-facing camera
3
15 Ambient light sensor
16 Windows Start Menu sensitive button
Getting started with the tablet
B
A
1
Check the dongle is plugged in USB Port (A), if not locate the dongle on the VCI
lead and plug it in to the USB Port (A).
2
Switch on the device by pressing ON/OFF button (B).
3
Swipe your finger on the screen from the right side to the left to display System
commands.
4
Tap Settings icon to access Wifi Settings.
5
Connect to your wifi network for internet connection.
6
Launch the Diagnostic software by clicking on the « DS Cars » or « DS Heavy Duty
Vehicles » tile from the Start menu or from the desktop
7
Follow the connection instructions, specific to the vehicle to diagnose, displayed in
the software.
Getting started with the On-Screen Keyboard
1
2 3
4
1
Show Keyboard icon
2
Dock / Undock keyboard (when undocked can be moved anywhere on the screen)
3
Hide Keyboard
4
Change Keyboard style / Hide Keyboard
delphiautoparts.com
Air Conditioning | Braking | Diagnostics | Diesel | Engine Management | Fuel | Ignition | Maintenance | Steering & Suspension
1/2
©2015 Delphi Automotive PLC. All rights reserved.
DDGX238(EN)
Software main menu
C
D
VRM lookup
E
C
Type the VRM of the vehicle and press « Enter » Key to lookup the vehicle. (Available in
United Kingdom only).
A
VIN lookup
D
Type the VIN or click on the button to retrieve the VIN from the vehicle (the VCI must be
connected to the vehicle and the VCI must be setup in the hardware settings)
Vehicle Technical Information
(maintenance schedule, Adjustement data, repair information, etc. Only available when online.)
Website links
B
E
F
Vehicle battery voltage level indicator
Classic view
Simple selection by make, model, year and system
A
Generic EOBD Scantool
Activity Indicator
Information/Tree structure
Flight Recorder
Selection by make, model, year and system with functions breakdown and information on
diagnostic socket and engine code location
This functions records the selected parameters while driving the vehicle. Once the FR session is
configure press, the REC button at the rear of the VCI to start recording
History
ISS (Intelligent System Scan)
Shows the history of the last diagnosed vehicles for quick selection
F
This function scans all ECU fitted on the vehicle and reports found Diagnostic Trouble Codes.
Select « System Scan » in « Type of System » list to enable this button.
Diagnostic
B
Quit Program
Access to all Diagnostic functions supported by the selected ECU
Rear VCI view
Connection to vehicle
!
Locate the USB dongle on the VCI lead and plug it to a USB port of the
computer.
1
REC
3
2
1 MicroSD slot for Flight Recorder
2 Flight recorder Trigger button
3 USB Port
or
VCI
Diagnostic functions
DTC reading (Diagnostic Trouble Codes)
Informations (EOBD)
Gives access to DTC stored in the selected ECU and associated freeze frame data when available.
Displays general information about the vehicle (communication protocol, available control units, number
of DTC, MIL Status etc.)
DTC clearing (Diagnostic Trouble Codes)
Freeze Frame Data (EOBD)
Sends a DTC clearing request to the selected ECU.
Displays to EOBD Freeze Frame (EOBD function only)
Real-Time Data
Oxygen Sensor tests result (EOBD)
Allows dynamic reading of ECU parameters, with the ability to select the parameters to be viewed
simultaneously, in either instantaneous or graphical way.
Displays the Oxygen sensor(s) tests result
Adjustements
Non-continous tests result (EOBD)
Give access to ECU ajustements such as injector coding, adaptation reset, pedal calibration, service
reset, actuator relearning etc.
Instructions are provided to guide the user in the use of the function.
Displays the EOBD Non-continuous tests result
Component Activation
Diagnostic check (EOBD)
Forces ECU to test its funtionality
Displays the EOBD tests result
ECU Coding
Vehicle information (EOBD)
Allows to configure and code ECU for functions such as Tyre size configuration, key programming,
VIN programming etc.)
Displays vehicle identification numbers - Vehicle Identification Number (VIN) , Calibration Identification
Number (CIN) and Calibration Verification Number (CVN)
delphiautoparts.com
Air Conditioning | Braking | Diagnostics | Diesel | Engine Management | Fuel | Ignition | Maintenance | Steering & Suspension
2/2
©2015 Delphi Automotive PLC. All rights reserved.
DDGX238(EN)