Call for papers

Transcription

Call for papers
The International Conference Management of Technology – Step to
Sustainable Production (MOTSP 2015) will take place from 10–12 June,
2015 in Brela (near Makarska) Croatia, as a joint project organized by the
Croatian Association for PLM and the Croatian Ergonomic Society.
University of Zagreb, Faculty of Mechanical
Engineering and Naval Architecture
University of North,
Koprivnica, Croatia
with support of
University of Primorska, Faculty of Management, Koper
University of Zagreb, Faculty of Graphic Arts
University of Skopje, Faculty of Mechanical Engineering
University of Maribor, Faculty for Mechanical Engineering
Politecnico di Torino
Institute for Innovation and Development of University of Ljubljana
are organizing
th
7 International Scientific Conference
Management of Technology
Step to Sustainable Production
MOTSP2015
SECOND CALL
June 10-12, 2015
Brela, Makarska, Croatia
According to the Scientific Committee recommendations and special
accordance between MOTSP 2015 and journals Technical Gazette (the
issue will be published at the beginning of the year 2016), Transaction of
FAMENA and International Journal of Industrial Engineering, PLM and
Sustainable Production the authors of the selected papers will be invited
to extend their papers for publication in the mentioned journals.
Organisation
• Faculty of Mechanical Engineering and Naval Architecture
University of Zagreb
Ivana Lučića 5, 10000 Zagreb, Croatia
Phone: +385 1 6168 340 Fax: +385 1 6157 123
• University of North
Trg Žarka Dolinara 1, 48 000 Koprivnica, Croatia
• Croatian Association for PLM
Ivana Lučića 1, 10000 Zagreb, Croatia
• Croatian Ergonomics Society
Ivana Lučića 5, 10000 Zagreb, Croatia
SCIENTIFIC COMMITTE
Barić G. (Croatia)
Jerbić B. (Croatia)
Bachman B. (USA)
Kladarić I. (Croatia)
Bouras A. (France)
Kondić Ž. (Croatia)
Božič S. (Slovenia)
Krajnik P. (Sweden)
Canen A.G. (Brazil)
Kunica Z. (Croatia)
Ćosić P. (Croatia)
Majetić D. (Croatia)
Dolinšek S. (Slovenia)
Menipaz E. (Israel)
Đukić G. (Croatia)
Milčić D. (Croatia)
Gečevska V. (Macedonia) Milković M. (Croatia)
Guenther H.O. (Germany) Opalić M. (Croatia)
Guzović Z. (Croatia)
Ozturk, A (China)
Hršak D. (Croatia)
Petković D. (BiH)
Ikonić M. (Croatia)
Poppeova V. (Slovakia)
Raos P. (Croatia)
Renko S. (Croatia)
Savescu D. (Romania)
Sawik T. (Poland)
Sušić A. (Croatia)
Sihn W. (Austria)
Šercer M. (Croatia)
Štefanić N. (Croatia)
Štorga M. (Croatia)
Tropša V. (Croatia)
Wang E.M.Y. (Taiwan)
Wang Y.C. (Taiwan)
ORGANIZING COMMITTEE
Predrag Ćosić (Chairman) Goran Đukić
Gordana Barić
Aleksandar Sušić
Tihomir Opetuk
SPONSORING ORGANIZATIONS
• Ministry of Science, Education and Sports, Croatia
• University of North, Trg Žarka Dolinara 1, 48 000 Koprivnica, Croatia
• Fund for Environment Protection and Energy Efficiency, Croatia
• Croatian Employment Service, Croatia
PARTNER ORGANISATIONS
• Center for Virtual Production, Faculty of Mechanical Engineering,
Kragujevac, Serbia
• Institute for Innovation and Development of University of Ljubljana,
Slovenia
MAIN TOPICS
• Management of Technology
• Production, Operation Management
• Strategic, Engineering Management
• Industrial Engineering
–– Operational Research
–– Logistics
–– Production Economics
–– Decision and Risk Analysis
–– Manufacturing Costs
–– Supply Chain Management, Total Quality Management
–– Forecasting, Technology Foresight
–– Business Intelligence
–– Maintenance, etc
• Ergonomics
–– Aesthetic Ergonomics
–– Applied Ergonomics
–– Cognitive Ergonomics
–– Design and Product Ergonomics
–– Ergonomic Database, Knowledge and Considerations
–– Industrial Ergonomics, etc.
• Rapid Prototyping and Manufacturing
• Computer Integrated Manufacturing CAD, CAM, CAPP, CAQ
• Robotics and Mechatronics
• Sustainable Production
–– Product Lifecycle Management (PLM)
–– Green Production (BAT)
–– Clean Production
–– Eco Design
–– LCM (Life Cycle Management) & Decision Supports
–– LCA (Life Cycle Assessment)
–– LCI (Life Cycle Inventory)
–– LCIA (Life Cycle Impact Assessment)
–– Extended Products
–– SLCA (Social Life Cycle Assessment)
–– Renewable Sources of Energy
–– Energy Efficiency and Audit
–– Eco Labeling
–– Recycling
–– Reverse Logistics
• Artificial Intelligence
• Total Cost Assessment
• Financial Sustainability
• Social Responsibility et all.
GENERAL INFORMATION
Deadline for abstract submission:
• January 30th, 2015
Submission of paper titles and abstracts (up to 100 words) using
abstract submission form at www.motsp2015.org
Notification of acceptance of abstracts:
• January 30th, 2015
Final submission of full papers:
• April 15th, 2015
Notification of acceptance of full papers:
• May 15th, 2015
CORRESPONDENCE ADDRESS
CaPLM – Croatian Association for PLM
Ivana Lučića 1, 10 000 Zagreb, Croatia
• Chairman:
Prof. Predrag Ćosić, PhD, FMENA, Department of Industrial Engineering
• Secretary:
Gordana Barić, M.Sc., FMENA, Department of Industrial Engineering
Ass. Prof. Goran Đukić, PhD, FMENA, Department of Industrial Engineering
Prof. Aleksandar Sušić, PhD, FMENA, Croatian Ergonomics Society
E-mail: [email protected]
Url:
www.motsp2015.org
THE MOTSP 2015 CONFERENCE AWARDS
1. Award For the best paper in the young researchers category
2.The best paper presentation award
3.The MOTSP 2015 best paper award
THE MOTSP 2015 SPECIAL AWARD
The first five participants paying the conference fee will be awarded
with a surprise excursion.
INFORMATION FOR PARTICIPANTS
Conference Venue
Bluesun hotel Soline ***, Brela
Trg Gospe od Karmela 1,
21322 Brela, Croatia
Url: www.hotelsolinebrela.com
Registration
Bluesun hotel Soline
Registration should be acknowledged at the reception desk on:
• June 9th, 2015 18:00 - 20:00 Welcome drink
• June 10th, 2015 08:00 - 09:00
Payment
• Early conference fee until May 20th 2015: EUR 260
• Late conference fee after May 20th and before May 25th 2015: EUR 310
Presentation
Presentations should take 15 minutes. Authors will have the possibility of
using all necessary equipment for the presentations (Power Point).
All the accepted papers will be published in the Conference Proceedings
to be distributed during the Conference. According to the Scientific
Committee recommendations, the authors of the selected papers will be
invited to extend their papers for publication in the following journals
(some of them are included in databases CC, SCI, SCI – Expanded):
• Metallurgy, Journal for Theory and Practice in Metallurgy
• Transaction of FAMENA
• Technical Gazette
• International Journal of Industrial Engineering,
PLM and Sustainable Production
• Advances in Production Engineering and Management
• Journal of Mechanical Engineering
• UP FM – Management
• UP FM – Management Global Transition
• Polimeri
• Flexible Services and Manufacturing Journal
• Journal of Intelligent Manufacturing
• International Journal of Product Lifecycle Management
• Annals of Faculty Engineering Hunedoara – International Journal of
Engineering
• International Journal of Transitions and Innovation Systems
• Acta Mechanica Slovaca – The Technical University of Košice
Conference language: English
Mostly of presented papers would be nominated
for publication in one of the journals which are
mentioned in this call.
Arriving
Arriving by plane: Airport ”Resnik’’, Split
Alternative airport: Zagreb, Dubrovnik
Accomodation reservation in Brela, Bluesun hotel Soline,
conference dinner and excursion
Participants and accompany persons of MOTSP 2015 have a special offer
from Bluesun hotel Soline and reservation.
For information, please contact before May 20th, 2015, only:
Tourist agency, Sunce Global d.o.o., Trpinjska 9, 10 000 Zagreb, Croatia
Miss Natalija Đukanović or Miss Edita Galić
Url: www.bluesunhotels.com
E-mail: [email protected]
T +385 91 2862 200
Accomodation
Single room (half board): 85 EUR per person (all taxis are included in price)
Double room (half board): 65 EUR per person (all taxis are included in price)
Gala dinner and excursion
• Conference dinner: June 11th 2015: 60 EUR,
• Excursion – Dubrovnik: June 12th 2015: 60 EUR.