Double Tap - QuickPlan 3D

Transcription

Double Tap - QuickPlan 3D
Getting started with A
Touch
Main fonctions
- Select a line
- Precise adjusment of dimensions
- Moving a slab building
- Move the entire view when moving an item
Projects
Settings
Plan 2D
- Adding interior walls
- Cut / detach the interior walls
- Changing swing directions
- Adding a straight staircase
- What to do when an opening hides a wall
- Slab / floor openings
- Thickness of exterior walls and interior walls
- Adding furniture
settings
E-mail: Save a project, or share it with others,
or use it on another iPad or to the cloud (iOS8)
Create a CAD project based on this floor plan and transfer it
into App ArchiTouch 3D
Models available as examples
This box is displayed when the project is first created
you can change the values at any point using
Options:
Options:
1
Principles
The floor plan design starts from slab 1created with new projects.
This slab represents the envelope of the house.
To design your project, move, stretch of cut the walls, without separating them
(Details on next page).
Room
30 m2
Room
30 m2
1
2
1
Initial slab
2
Use
3
Move selected wall
4
Room surface is automatically computed.
to place cut marks on walls
Room
30 m2
3
Room
20.8 m2
4
Room
22.8 m2
Room
20.8 m2
Room
22.8 m2
Info: 1-Double Tap on
Room
30.1 m2
or outside the building, the menu becomes orange ,
2-The movement of the wall is slowed, adjustment of dimension becomes accurate.
3-Double tap on
or outside the building to clear precise mode.
1
Move
Rotate
2
1 Touch and hold the interior of the building with 2 fingers to select it
or
ooo
2 Move the entire building with one finger, rotate it with arrow
Room
30.1 m2
Room
34.7 m2
double Tap
Room
5.6 m2
1
Room
5.6 m2
2
Room
5.6 m2
3
Method A
Method B
Room
4.8
m2
Room
4.8
m2
Room
4.8
m2
Info: the pointer is above your
finger to avoid delete errors
Tap
Room
8.6 m2
Room
8.6 m2
Room
12.1 m2
Room
4.5 m2
Room
8.6 m2
Room
8.6 m2
Room
6.9 m2
Double Tap
Cut wall
To modify all the walls in the building:
Options:
Room
4.8 m2
Info: the concerned object becomes yellow during a few seconds.
www.quickplan3d.com
For any question : www.quickplan3d.com/support
How to move items
Touch and drag the end of a line to increase or decrease its length or change its angle
If necessary
Touch and drag the line to move it vertically (relative to its axis)
If necessary
Double tapping clear space with another
finger when moving an item will deactivate the
positioning guides (angle/alignment).
The item will be displayed in yellow to indicate
this change.
Improve your view when moving items
1
Tap the line to select it
2
Touch close to the selected item to
activate the virtual finger pointer
Displaying angles
90° and 180° angles are not
labelled
Precise adjusment of dimensions or positioning of an item
Double tap:
on
or outside the building for design plans
reduces movement speed
If necessary
deactivate the positioning guides
(see page 1)
Moving the entire Floor plan
1
Move
Rotate
2
1 Touch and hold the interior of the building with 2 fingers to select it
or
ooo
2 Move the entire building with one finger, rotate it with arrow
Move the entire view when moving an item
1 Keep your first finger on the item you want to move
2 Use a second finger to move the entire view at the
same time
Ensure you move the entire view instead of the item
You can also increase or reduce the size of the design by
using a third finger near to the second
Changing swing directions
for doors or windows: left, right, inward, outward
Moving openings to another wall: doors or windows
3
1
2
Select and move superposed item
What to do when an opening hides a wall
1
Tap on the opening
2
3
Select “exterior wall”
Move the wall with one finger
Duplication of doors and windows
1
Tap on the opening
2
A 2nd opening is added
Displaying the function dialog box
Double tap one of the 4 functions
Undo or redo
(unlimited)
The item will be displayed in
yellow
Thickness of exterior walls
Double tap
on an exterior wall
To modify all the walls in the building:
Options:
Thickness of interior walls
on an interior wall
0,50
1,50
Enter a value to create a low wall
provides information about the surface area and
division of rooms
Label the rooms
Room name
name
Room
ok
Room
Room
Living Room
________________________________________________________________________________
Kitchen
____________________________________________________________
Room
22,3 m²
Master Bedroom
____________________________________________________________
Bedroom
Double tap
on the room label
Enter the name or choose from the predefined list
Projects
Project management
Settings
Create a floor plan with furniture and view 3D (Tap
to open)
Models available as examples
E-mail:
save a project,
or share it with others,
or use it on another iPad
or export to the cloud (iOS8)
Create a CAD project based on this floor plan and transfer it
into App ArchiTouch 3D
Settings
Working parameters
To enter imperial units:
1’ 2" 3/4 or: 4.5" becomes 4" 1/2
14.75" becomes 1’ 2" 3/4
Standard precision provides short and
convenient dimensions (1”).
High precision displays 1/4 “
Allows windows to be placed on interior walls
Editionmode
Configure the period of time before
is reactivated after using one of the following
options:
Plan 2D
Basic design principles
The exterior walls determine the edge of the building. Therefore, they cannot be separated, but can be cuttable to
create the required shape.
Home
Project name
Interior surface information:
Plan 2D
Adding interior walls
1
2
3
4
5
6
1 Select the “add wall” option
2 Touch the interior of the building to define the starting position
3 Lift your finger from the screen when the starting point of the wall is reached
4 Touch the screen, the wall will be created:
move your finger to determine the wall length, lift your finger when complete
5 Touch the screen in the same place to continue the wall, or elsewhere to create another
6
new wall
Repeat steps 2 and 3
Plan 2D
Detach
Functions cut-detach
Or
Cut
Valid for both interior and exterior walls
Only valid for interior walls
Info: the « Cut » can be used with other items
such as stairs, floor openings etc.
Plan 2D
1
Adding a straight staircase
2
3
4
1 Select
2 Touch the screen to position the green cross at the starting point, then lift your finger
Touch the screen to continue the staircase
Move your finger to determine the required staircase length, then lift your finger to complete
3 the process
4
Rise height
Going: distance between two steps (edge of
nosing to edge of nosing)
Note: Stairs height is automatically set to reach above level.
Plan 2D
Solution A
1
2
3
4
1
Adding a winder stairs
2
3
Select
Create a straight staircase
After lifting your finger, touch the screen in the same place
Move your finger to create the size of winder that is required, then lift your finger. Repeat if necessary.
Solution B
cut
4
Plan 2D
Example winder staircases
Zoom
Select the staircase
The values for all steps will be displayed
Plan 2D
1
Slab/floor openings
2
3
4
Height between the staircase step and the slab (in red if the
previous step is limited)
Example floor opening cut out
1
cut
2
3
Plan 2D
Adding furniture
1
2
3
1 Open the furniture choice panel,
2 Tap the type of furniture you want to add,
Place your finger where you would like to position the furniture.
3
Furniture will automatically align itself with the nearest wall
Info: overlaying multiple items of furniture at different heights is possible
Plan 2D
Resizing furniture
Double Tap
to open the dialog box
During rotation, you can put a second finger on the
screen to temporarily translate the object,
Tip: to resize furniture that has been placed on top of other furniture,
you select items and move it
Plan 2D
Duplicate furniture
Lit
Examples of automatic furniture modification
Kitchen block
Fridge
Plan 2D
Options:
Photos – PDF – e-mail - cloud
On the left side, select paper format and scale.
The plan may need several pages depending on
those settings.
On the right side, select generation options..
Tap on Generate photos to create plan image in
your photo album
Tap on Generate PDF to create a PDF file which
can be sent by email or sent to the cloud (iOS 8
only)