IC102-104 英文说明书 130X200mm 100g书纸单色印刷

5. IC102 Wiring Diagram of TCP/IP 2-Door Network Access Controller
4. IC101 Wiring Diagram of TCP/IP 1-Door Network Access Controller
1. Feature
6. IC104 Wiring Diagram of TCP/IP 4-Door Network Access Controller
Description
-
-
-
-
+
+
CON3
CON1
-
+
Exit Button
+
A4 B4 C4
CON4
J9
Joint of closing
door by force
D2 E2 F2
CON2
D2 E2 F2
LED
-
Exit Button
D0
D1
-
LED
Door magnetic contact
+12
GND
D4 E4 F4
8.2 Module Features:
7. Wiring Diagram of LAN and WAN
8.2.1 4-way alarm output. You can set function to which door or which doors of the controller accordingly .
8.2.2 Can connect the fire signal input, when fire signal received, doors in the controlled area will open automatically, and
7.1 Wiring Diagram of LAN
generate a fire alarm record, for later checking.
8.2.3 Can support break in alarm, long time unlocking alarm, forced into alarm, invalid card alarm, fire& alarm linkage etc.
Network switch or HUB
8.2.4 Can set delay time of each output from 0 to 600 seconds.
8.3 Wiring Diagram
Operator Computer
F+
F-
2
N
Can connect many IC series
TCP/IP network access controller
IC series network
access controller
IC series network
access controller
IC SERIES
Fire closure signal input
1
IC series network
access controller
TCP/IP Access Controller
NC4
Relay4
JD4
7.1 Wiring Diagram of WAN
COM4
NO4
NC3
JD3
Operator Computer
Relay3
INTERNET
COM3
NO3
NC2
ADSL
Router
ADSL
Network
switch
or HUB
Relay2
Router
JD2
Network
switch
or HUB
COM2
NO2
NC1
2
IC series network
access controller
NO1
N
Can connect many
IC series TCP/IP
network access
controller
LED1
IC series network
access controller
J3
GND
Fire & Alarm expansion board is add-on module of network access controller, can set by software, mainly for Fire & Alarm
signals output.
Insert to the IC series
TCP/IP access controller's
expansion interface
Power
+12V
8. Fire & Alarm Expansion Board(Optional)
8.1 Introduction
+
2
IC series network
access controller
COM1
Alarm
IC series network
access controller
-
IC series network
access controller
Relay1
Can connect many
IC series TCP/IP
network access
controller
1
JD1
N
IC series network
access controller
1
User Manual
Door4 Reader(enter)
D1
-
J9
Door magnetic contact
If want to use relay's dry contact, please
follow steps below:
1, Open the case, pull out all jumpers.
2, Use one of jumper, connect A and B.
3, In this way, "LA" is "NO" of Relay, "LB"
is "NC" of Relay, "L-" is "COM" of Relay.
D0
A2 B2 C2
Electromagnetic
lock or electric bolt
D3 E3 F3
+12
Electrified Locksets
or electric strike
Electrified Locksets
or electric strike
A3 B3 C3
+
Door magnetic contact
+
+
J9
LED
Door 3 Reader(enter)
Exit Button
GND
Electromagnetic
lock or electric bolt
A2 B2 C2
Fire & Alarm expansion board
(optional)
Network interface
Exit Button
Door 2 Reader(enter)
For installation
Exit Button
D0
D1
Door 2 Reader(Exit)
4
LED
Electromagnetic
lock or electric bolt
+12
GND
Joint of closing
door by force
Self-tapping Screws
D1
CON2
For installation
LED
LED
Door magnetic contact
If want to use relay's dry contact, please
follow steps below:
1, Open the case, pull out all jumpers.
2, Use one of jumper, connect A and B.
3, In this way, "LA" is "NO" of Relay, "LB"
is "NC" of Relay, "L-" is "COM" of Relay.
4
+12V
CON1
Rubber Bungs
D1
A1 B1 C1
+
1
D0
-
1
User manual
+12
-
CD
D0
D1
D1 E1 F1
+
IC101 without metal case
Door 2 Reader(enter)
1
D0
Electromagnetic
lock or electric bolt
A1 B1 C1
GND
Electrified Locksets
or electric strike
Joint of closing
door by force
IC 101, IC102 or IC104 controller
+12
GND
D1 E1 F1
If want to use relay's dry contact, please
follow steps below:
1, Open the case, pull out all jumpers.
2, Use one of jumper, connect A and B.
3, In this way, "LA" is "NO" of Relay, "LB"
is "NC" of Relay, "L-" is "COM" of Relay.
Remark
Door 1 Reader(enter)
+
CON1
LED
OUTPUT DC +12V/3A
-
+
D1
GND
-
-
D0
Then LA +
+
-
Door 2 Reader(enter)
+12
+12
GND
Electrified Locksets
or electric strike
Door magnetic contact
D1 E1 F1
GND
Then L -
Then LA +
Exit Button
L-
LED
L+
LED
Electromagnetic
lock or electric bolt
A1 B1 C1
Door magnetic contact
Quantity
Router
POWER
D1
GND
D0
D1
+ 12V
D0
Wiring of Electric intelligent lock
+12
GND
Electrified Locksets
or electric strike
3. Packing List
Name
Then L -
+
Electromagnetic
lock or electric bolt
L-
Exit Button
Electrified Locksets
or electric strike
L+
LED
+12
GND
Door 1 Reader(Exit)
D1
Door 1 Reader(enter)
D0
GND
+12
GND
+ 12V
Then LA +
Then L -
Wiring of Electric intelligent lock
L-
L+
Door 1 Reader(enter)
GND
+ 12V
Wiring of Electric intelligent lock
> Control doors: IC101 controls 1 door; IC102 controls 2 doors; IC104 controls 4 doors.
> Quantity of connecting Reader: 2 for IC101(enter & exit by swiping card)
4 for IC102 (enter & exit by swiping card)
4 for IC104 (enter by swiping card)
> User capacity: 20,000 pcs
> Event log: 100,000pcs (can be saved on controller permanently)
> Way of opening door: card; card + PIN; multi-cards; first card etc.
> Communication standard: TCP/IP
> Language of Software kit: Chinese & English
> Support database: Access and SQL
> Dimensions: 163mm×125mm×25mm (IC101)
201mm×125mm×32mm (IC102, IC104)
> Requirement of power supply: DC 12V/3A
> Idle current: ≤120mA
> Input format of card data from reader: Wiegand 26, 34 bit
> Input format of pressing keypad of reader: 4bit or 8bit (ACII)
> Delay time of opening door: 1-600s optional
> The maximum number of controller connecting in LAN: no limit
> Operating temperature: -40-60℃
> Operating humidity: 10-95%(non - condensing )
> The max distance between reader and controller: 100meter (cable requirement: RVV0.3)
> The max distance between controller and controller: depending on network coverage
Fire & Alarm expansion board
(optional)
2. Technical Parameters
Network interface
Must swipe the first card, the others can enter by swiping their card. Suit for confidential
department.
Router
Opening door by first card
+12V
Swipe multiple cards, door will be opened.
OUTPUT DC +12V/3A
Opening door by multi-card
GND
Must swipe card to enter in and only swipe the same card to exit; To prevent people
following enter & exit; Suit for facility with high security requirements.
POWER
Anti-passback of 1 door
Fire & Alarm expansion board
(optional)
Open door by cell phone through WIFI
Network interface
Can set who/when/how can access
Opening door by cell phone
Router
Access control setting
+12V
Suit for checking employees' attendance status & doing statistical management of
corporation, government departments.
OUTPUT DC +12V/3A
Time & Attendance
GND
Can check in/out time of everyone, suit for in/out personnel management of all kind of site.
POWER
In/out management
+
Function Name
Electrified Locksets
or electric strike
Electromagnetic
lock or electric bolt
Door magnetic contact