Natural Veneers 16

Comments

Transcription

Natural Veneers 16
Veneer Vs. Solid Wood…
When you go for shopping to buy furniture for you interior and get two options of choosing
between Veneer or Solid wood furniture, and you get confused that what to chose and in what
furniture to invest. wood veneer both have there unique characteristics and hence it becomes
difficult to decide where to invest your money on. Buying the furniture or buying decor is not a
big task but deciding the perfect choice is the biggest hurdle.
But now there will be no confusion and you will be able to make better decision as today we
will be giving a clear comparison between Veneer and Solid wood with all the pros and cons, so
next time if you go to shopping you can make a hassle free decision without getting confused.
After reading this blog, if you still have any confusions, please make sure to mention it in the
comment section and we will make sure to reply as soon as possible with an appropriate
answers to all your question.
What Is Veneer?
A veneer is a very thin piece of wood that is attached to particle board or other types of
manufactured wood. Veneers are used to lessen the cost of a project without sacrificing the
overall appearance.
A veneer is a thin piece of hardwood that is placed over a piece of manufactured wood. It may
be attached using an adhesive, nails or screws. Veneers are frequently used on cabinets,
furniture, and floors. The frame and shelves of the units are made of particleboard, MDF or
plywood, but the viewable surfaces are covered with veneers. This gives the appearance that
the product is solid hardwood, but it is much more cost effective for many homeowners.
Veneers are available in a variety of grains and finishes, and they are typically much more
consistent in appearance than most hardwood products. Some carpenters create their own
veneers, while others purchase veneers from manufacturers. Veneers are especially suitable for
door panels, exposed sides and interior cabinet areas that will be viewable.
Pros of using Veneers Incredibly Beautiful:
Veneers are incredibly beautiful and elegant. The thin shits of veneers are made in such a way
that it add a actual point of attraction on the beauty of a wall or a furniture.
Lighter in weight:
Veneers are very light in weight as compared to solid wood. Due to its lightweight, the usage
capability also is also high.
Since veneer is so thin and is glued to a stable substrate, it allows designs and arrangements of
the wood that would fail in solid wood. Solid wood, even kiln-dried, expands and contracts as
the seasons change from summer to winter and back to summer again. For example, a radiant
table top would be impossible to create with solid lumber because the seams would open in
the winter and swell tightly shut in the summer.
For More Information : Flexible Wood Veneer
Durability:
The durability of veneer is very high as compared to solid wood, as they are not prone to split
or wrap due to seasonal moment. If we talk about the seasonal changes and its effects on
Veneers and Solid wood, here Veneer straightly wins the battle due to its highly durable
characteristics.
Designing:
Veneers provide beautiful designs opportunity and options as compared to solid wood. As the
veneer sheets are very thin, designs possibilities are huge.
The best and most interesting logs are cut into veneer – typically this is an economic decision.
You can get ample of designs options to chose from and decorate your perfect interior.
Aesthetics:
Veneers consists of a set of principles concerned with the nature and appreciation of beauty. It
offers a consistent appearance in grain and color. The grain yield is much higher than using solid
wood.

Similar documents