AUTOSTAF F, SAP 1. Car masters basic courses:

Company
name
AUTOSTAF
F, SAP
BULLSONE
UKRAINE
/ Production
Production characteristics
1. Car masters
basic courses:
- Auto painter assistant (1 month).
Duration: 132 hours for 1 month (68%
practical training).
- Auto painter (1 month).
Duration: 132 hours for 1 month (68%
practical training).
- Polisher (2 weeks)
Duration: 72 hours over 12 days (68%
practical training).
- Course "Removing dents without
painting the system PDR» (4 weeks)
Duration: 192 hours over 24 days (79%
practical training).
- Colourist. Selection of enamel (24
days).
Duration: 144 hours over 24 days (65%
practical training).
2. The training
courses.
- Refresher courses on specialty Auto
painet (6 days).
Duration: 36 hours for 6 days (25%
practical training).
1.Bullsone Premium
carnauba wax –
high quality hard
wax.
Brazilian wax Carnauba is used, the 1st
class.
Carnauba wax provides lasting
smoothness and sustained a deep
shine.
It provides unsurpassed surface mud
and water repellent, effectively removes
micro-scratches on the back of a car,
generates the surface of ultrathin film
that protects the car from salt, road
agents, ultraviolet radiation and other
aggressive actions of the environment.
It does not contain abrasives.
It could be apply to any colour car.
Effect persists for 7 months.
2. Bullsone Shot
– 6 in 1 – this is
enhanced
cleaning of fuel
system for
gasoline (diesel)
engine.
It perfectly cleans harmful carbon
deposits on the injector, cleans harmful
carbon deposits on the inlet valves and
combustion chamber.
It gives strong protective coating on the
inner wall of the piston and cylinder to
prevent damage caused by the friction.
It quickly removes moisture in the fuel
tank and highways.
It prevents oxidation of fuel (fuel
stabilizer to prevent sticking and the
emergence of pitches that appear as a
Picture
result of oxidation of fuel).
Contains proprietary additives PEA
chemistry.
Fuel capacity ↑ ↓ ↓ noise exhaust
gases ↓
It is optimized for engines with direct
injection.
It enriches the fuel mixture through
special formula Bullsone, eliminating
the harmful effects of the use of poor
quality fuel.
Certified - TUV (Germany).
DISLA
LIGHT
ALLOY
WHEELS
3. Bullsone
RainOK
Extreme- waterrepellent coating
for window.
It has a strong water-repellent effect.
At a speed of 60 km /h raindrops fly
glass, it helps do not use window
wipers.
For a single water-resistant effect lasts
up to 6 months.
The standard dosage for a medium size
car - 20 ml.
1.Ten-spoke
wheels Raptor
It is one of the most popular models of
Disla, which stands spot design and is
available in three sizes running at 15,
16 and 17 inches. These discs will be
appropriate and look great at the budget
hatchback and middle class sedan.
Raptor wheels are available in four
colour versions: silver, black, and stand
alone version with unique powdercoated black diamond and silver
diamond.
In the same price range - model
Formula, available in sizes 15 and 16
inches. These five-spoke wheels has
simple but elegant design, they can be
found on big variety of vehicles. The
colour range includes five versions:
White, Silver, Black, Black Matte (matte
paint coating) and Black Diamond.
And a higher grade model - model
Assassin, one single standard size is
applied with a bore radius of 18 inches.
These laced wheels with five double
spokes are designed for modern highspeed cars, whose owners are
scrupulously to the nuances of his car
appearance, rightly considering that the
elegant wheel - it is on the expensive
cufflinks shirt. Assassin is available in
2. Formula
model
3. Assassin
model
4.Genesis model
five colors: Silver, Black, Black Matte,
Gunmetal and Black Diamond.
For the same demanding audience
Genesis model is designed, which is
represented in 2 sizes: 18 and 20
inches. Five-spoke, featuring
meticulous study of details, simple
design - and only in black colour
variations: Black, the Matte Black, and
Black Diamond.
Diesel engine oils.
EMIRATES
NATIONAL
COMPANY
(ENOC)
ENOC Protec
Family- Gasoline
Engine Oils &
ENOC Vulcan
HONGTYRE
GROUP
CO.,LTD
1.12.00R2020PR RS602
Tyres are suitable for all wheel positions
of middle/long-distance trucks at
various road conditions, 3 zigzag
groves combine with lateral sides on
shoulder provides excellent traction and
prevent from hydroplaning.
2.315/80R22.520PR RS604
Tyres are suitable for driving wheel
position of middle/ long distance trucks
at various road conditions. Directional
mixed pattern provides extremely good
traction and prevent from hydroplaning.
3. 385/65R22.520PR RS609
Tyres are suitable for middle/long
distance trucks at good road conditions,
5 zigzag-groove structure provides
excellent traction and smooth driving,
as well as vehicle composure
1.Automotive
motor and
transmission oils
of Royal Purple
(USA)
Motor oils of the highest quality for civil,
sports and professional racing engines.
Modern engine oils tolerances for
Japanese, American-made cars.
KOPYLBRO
S
NCP,
MAXYTONE
2.Car
accessories for
new imported
cars
3.Alternative
tuning optics for
modern imported
automobiles
1.Colourless
acrylic paint
PLATINUM HS 2
+1
2. Enamel
Maxytone
3. Enamels
system selection
Automobile armrests, side-window
deflectors, door moldings, protective sill
and bumpers, mudguards, chrome
decor.
LED taillights, xenon-like headlights,
driving lights.
Two-component acrylic lacquer
Premium Line has a high total dissolved
solids content. High adhesion,
resistance to: atmospheric conditions,
UV rays with high protective properties.
It is crystal clear, well-spread and
elastic, which guarantees a perfect view
of painted surfaces, fully conveys the
depth of colour.
Two-component acrylic enamel is
intended for the production and repair of
body painting of passenger cars,
commercial vehicles and equipment.
Enemal forms a flat hard surface with
good luster while applying. It gives a
bright and stable colour.
The innovative colour matching system
for professional use Maxytone.
Equipment includes:
1. mixer stocker with 7 rack shelves:
208 x 64 x 208 cm, 84 cover (10 x 3.75
L + 74 x 1 liter;
2. mixer stocker with 5 shelves: 183 x
64 x 169 cm, 61 cover (9 x 3.75 L + 52
x 1 liter).
Also kit includes: colour-blocks and
information instruments, scales, mixing
covers, software.
NIPPON
MOTORS
FZCO
1.GP suspension parts
(made in Taiwan
and Thailand)
2.NIPPONgasket parts,
timing kit, engine
valve, valve
guide, brake pad
(made in Taiwan
and Malaysia)
3.TEIKIN piston and liner
(made in
Indonesia)
MXMASTER,
DESIGNSTUDIO
1. Kandy basic
finish «House of
Kolor»
Kandy basic coverage - a mixture
Kandy concentrate and costly pearl in
universal base. Kendi Kandy processing
base mimics Kandy. Coatings have low
dry film thickness, fewer layers, it has
simple usage, easy application. It is
available in 13 vibrant colours.
2.Enamel for
pinstriping
«House of
Kolor»
Urethane paint for pinstriping «House of
Kolor», has been designed for writing
letters, patterns of lines airbrushing. It
has a high pigmentation, low solids for a
minimal edge.
For durable coating it is even had to be
applied to existing coating. Urethane
enamel for pinstriping may be applied to
cover acrylic varnish, urethane lacquer,
acrylic and alkyd enamels, as well as
basic coverage.
3. Glitters
(flakes) «House
of Kolor»
They are made of ultra-fine polyester
glitter light and easy to follow. Mini and
ultra-mini glitter with far more brilliance,
combining maximum flake look and
ease of use.
SAMWASH
1.Equipment
self-service car
wash module on
stainless frame
2.Coatings for
self car wash
3.Accessories:
grids and pins
for rugs, vacuum
cleaners,
exchanger for
tokens, tokens,
washstands, etc.
ABV STROY
1.SMDP arrcan
system
2.Container
filling stations for
diesel fuel and
gasoline
3.Dispenser Self
Service 70 FM
With help of SMDP system selling of
fuel and lubricants will be available only
for certain vehicles or people (drivers),
and after fuelling all the required data
will be transmitted and stored in the
system. Control for the amount of
combustible and lubrication materials is
exercised by using SMDP software
package, all information is recorded and
transmitted to the PC (server) in a
simple and accessible way.
Container filling station on request can
be equipped with two tanks (under two
different types of fuel), such as diesel
fuel and gasoline. Container filling
station for diesel fuel and gasoline is
placed in one box, which is hardened
with steel frame, and the fuel is
distributed with a fuel dispenser, which
is equipped with two separate counters
and two dispensing guns.
Programmable dispensers allow you to
limit the number of users (max - 80) by
means of magnetic key or code. The
electronic control unit memory stores
information about the last 255 fueloperations. You can transfer data to a
PC, allowing you to quickly analyze
performance and take weighted
managerial decisions. It is possible to
preset the date and exact time of
refueling, the vehicle code, mileage.
Dispenser service is convenient and
easy.
ABSOLUT
AVTO
1.Full service
repair kit for
window regulator
2.Car holder
3.Trunk
organizer
CARGONIZER
AUTOCOMP
LEKTATSIY
A
1.ATH-Heinl
(Germany)
2.Tyre stand
linkage-less twospeed automatic
ATH M72 + A34
+ A31
ACCUMTRA
DE
High-quality equipment at a reasonable
price! StrongLine series hoists are
specially designed for vehicles with long
wheel base. Heavy-duty, three-section
telescopic shanks allow servicing
passenger cars, minivans, light
commercial vehicles. Construction
safety tests are conducted at the factory
in Germany separately for each rack.
Hoists are equipped with mechanical,
electromechanical security systems.
 Double-device "3 hand";
 Side aluminum squeezing
cylinder double acting with antijam system;
 Specially designed for lowprofile, wide and Runflat tyres;
 2 rotation speed desktop 7 and
14 rpm;
 External range of disc’s
clamping 9 "- 26".
3.Balancing
machine 2D
ATH W42
Trim controller 2D (2 parameters are
entered automatically).
 Built-in disc backlighting.
 Optical (laser line) load security
position indicator.
 Optional possibility of
transferring to 3D.
1.EUROCAR
batteries (for
passenger cars)
and
EUROTRUCK
(for cargo
vehicles
Premium class batteries that are fully
compliant with European standards EN,
GOST, UkrSEPRO. Batteries are made
by hybrid technology and are not
inferior to foreign analogues. Batteries
TM EUROCAR and EUROTRUCK - it's
the best battery for Ukrainian roads,
which have the following advantages:
- increased 20% reserve capacity;
- additional stock rated capacity;
- durability.
WARRANTY - 3 YEARS *
EUROCAR - EUROPEAN QUALITY
FOR UKRAINIAN price.
* Batteries for passenger cars
2.TM STARTA
battery
TM STARTA battery - is one of the best
Ukrainian batteries with a fair price and
optimal traction characteristics.
Batteries of TM STARTA work even at
maximum capacity and optimal starting
characteristics of batteries ensure easy
and reliable start your engines! Key
benefits:
- low self-discharge and increased shelf
life;
- resistance to vibration;
- low water consumption (corresponding
to mark "very low").
Batteries of TM STARTA are producing
in two most popular classes - class
Premuim (TM STARTA Strong) and
Standard class (TM STARTA).
WARRANTY - 3 YEARS *
STARTA - always easy to start in all
weathers.
* Batteries for passenger cars of
premium class
3.GREEN
POWER battery
GREEN POWER battery not only meets
the most exacting quality standards, but
also has the most modern design. The
manufacturer guarantees maximum
safety and environmentally friendly
battery operation. Benefits of battery of
TM GREEN POWER:
- the most modern battery with optimum
nominal reserve and starting
characteristics;
- adapted to the Ukrainian climate
(temperature control - from -50⁰S to +
50⁰S;
- suitable for use in extreme conditions.
Batteries of TM GREEN POWER are
manufacturing in two most popular
classes - Premuim class(TM GREEN
POWER MAX) and Standard (TM
GREEN POWER).
WARRANTY - 3 YEARS *
GREEN POWER - GUARANTEE
maximum safety and environmental
performance.
* Batteries for passenger cars of
premium class
ARS
MAGNA
ATLANTIS
KHIM, SPE
(TM
1.Hydrophobic
coating for glass
- AM Glass
Capacity: 20 + 10 ml. Durable
waterproof coating for glass. Penetrates
the structure of glass, creates a
protective coating thickness of 1 SANS.
It could not be wiped and washers
erased. 100% transparency, activity – 6
months. 4 in 1 protection from heavy
rains, dirt, insects, icing on the glass. It
includes 2 tanks (10 and 20 ml), wipe
for application, wiper for polishing. Kit
has capacity up to 2.5 sq.m. of glass,
that covers all glass surfaces of one
car.
2.Anti fog
Capacity: 250 ml. Prevents fogging
glass surfaces of automobiles, providing
excellent visibility in bad weather.
3.Cleaning agent
of insects’ traces
Capacity: 500 ml. It helps quickly and
easily remove traces of insects on
glass, headlights and car body.
1.SOLO tyre
fitting paste
SOLO tyre fitting paste is made for use
on steel and aluminum disks during tyre
fitting, tool lets you easily, efficiently and
«PRIMATER
RA»)
securely mount tyres of different
vehicles. Tyre paste eliminates
"sticking" of tyres to wheel disk. The
structure consists of special paste
anticorrosive additive that prevents rust
on the disk. Paste – is a mixture of
sodium salts of fatty acids, glycerin,
dyes, auxiliary materials and flavours.
Tyre paste SOLO is manufactured
according to specifications (TU U 20.5 38279934 - 001: 2014) and meet all
applicable government standards, it is
confirmed by hygienic conclusions.
FOR ALL TYPES OF WHEELS.
 Designed to facilitate mounting
of tyres on the disk.
 Allows tyres to prevent damage
during installation.
 Prevents corrosion of tyre and
disk.
 Has resistace to temperature
changes.
2.Wax marking
chalks (white)
Leave saturated bright bar, suitable for
use on any surfaces: rubber, wood,
stone, metal, glass, etc. Have resistace
to harsh climatic conditions,
temperature extremes.
Wax crayons contain several
components: a synthetic wax, inorganic
fillers and inorganic coloured pigments.
It is used during the tyre fitting. You can
put labels on dry and wet tyres, no
inscriptions erased throughout the
whole process tyre assembling.
3.SOLO – is a
special paste for
purification from
severe pollution
Is a special paste for purification from
severe pollution - effectively removes oil
and soot pollution, including oil, fuel oil,
bitumen, oil, graphite, metallic dust,
coolant, lubricants, adhesives, paints,
varnishes and other technological and
household pollution . The paste
includes only high-quality materials
imported and domestically produced,
well-treated skin.
Suitable for daily use in the workplace
related to continuing professional
pollution.
The most important consumer benefits
of the product:
 has a wide range of
applications;


high cleaning properties;
well tolerated by the skin
(because the PH level of
the paste to the natural
PH level of human skin);
 has a soothing effect,
leaving a feeling of
softness and comfort;
 prevents peeling;
 moisturizes skin;
 has a bactericidal effect;
 it does not contain any
soap, mineral oils and
hydrocarbon solvents;
 has a pleasant smell;
 natural scrub
(moisturizing) and
specially selected highperformance
components help to
remove severe
contamination, deep
clean of stomes,
accelerate the
regeneration and cell
renewal, allowing you to
refuse further use special
creams;
 economical use,
effectively purifies dirty
hands even dosing small
quantities;
 it does not clog
canalization.
Application method:
In the contaminated hands put
1-2 grams of paste (depending
on pollution), paying special
attention to the space between
the fingers and around the nails,
carefully rub and rinse with
water. For best effect before
applying hand should not be wet
with water. Once dirt starts to
dissolve, gradually moisten
hands with water and then
rubbed.
WUERTHUKRAINE
Station for
refueling car air
conditioners Coolius 2700 та
WAC 1200YF
Cargo
(WabcoWuerth)
and motor car
(Snooper +)
computer aid
diagnosis, for all
vehicle types
ORSY® system
‒ personal
assistant of
procurement
GBOKOMPLEKT
GBO kit - KME
NEVO 4u
GBO kit - KME
NEVO PLUS
GBO kit - KME
NEVO PRO
GLOBALCR
AFT
Globalcraft – this
is Internet
trading platform
Internet trading platform, which contains
everything for car painting. Tools and
materials, equipment and supplies,
expert advice and customer reviews.
Globalcraft is a multi marketplace that
unites all suppliers of materials and
equipment for auto refinish. Transparent
cooperation conditions, the existing
customer base, working with both B2B
and B2C with customers.
In the project team are not only
experienced sales managers, but also
technologists. Technicians will provide
customers with their experience and
knowledge.
Experts could come to major
customers, give some advises to staff
on site, conduct master classes on
working with materials and
comprehensive audit of the paint
complex.
GRAND
INSTRUMEN
T
Hunter wheel
alignment
Automotive lifts
Bright tyre
changers,
(premium class)
of the American
brand Hunter
Every passing year the country's car
park only increases and the complexity
of the design also increases. For this
reason, the use of outdated methods of
adjusting the wheel alignment in the
moment is not only difficult and in some
cases impossible. For example, on
vehicles with adaptive control system to
adjust the angles of the wheels with the
use of outdated or laser optical bench is
not possible. It is important to
understand the service station, which
for various reasons continue to exploit
outdated equipment. Client could buy
Hunter wheel alignment today using
various programmes and special offers.
Any service station, performing all kinds
of repair work of vehicles, to facilitate
the impacts associated with the
separation of the wheels on the ground,
must be stuffed with automotive lifts.
Depending on what kind of vehicle you
plan to serve, you must correctly select
the appropriate platforms for service
centers.
Wide range of tire mounting equipment
of Bright TM - is an ideal choice for tyre
assembling workshop which is reopening with a limited initial capital, as
well as for professional workshop with a
lot of experience and the regular
customers. In addition, we offer Bright
tyre changers (premium class) of the
American brand Hunter.
JTCUKRAINE
1.4091 JTC set for
removing and
installing bushin
gs, universal,
34-72mm
Universal device
for removal/installation slider bearers,
silent
blocks, hydraulicbearings, bearers with
rubber sleeve for different car models;



2.4144 JTC installation for oil
supply in the
automatic
transmission
(manual)









3.H090C-R72
JTC - tool set 90
units. (pcs.)
20 cartridges, ext. diameter
34- 72 mm (2 mm pitch);
2 bearing wheels, used with
a sleeve;
4 bolts: M10, M12, M14,
M16; length: 450 mm.
capacity: 9.5 L;
flow rate: 75 cm3 / cycle;
standard fittings (8 units.)
hose sizes: 3/8 "x 1500 mm;
dimensions: 330x260x650 mm;
specially designed for filling oil
automatic transmission.
removable fittings, suitable for
car brands differently.
hand pump to create a vacuum
prevents contamination with oil;
size fittings 8 units. Model AT101 - FORD, AT-105 - VW,
AUDI, AT-102 - universal finger,
AT-106 - Mercedes 722.9,
ALTIS 2010, AT-103 - VW,
AUDI, AT-107 - Audi, VW DSG,
AT -104 - VW, AUDI, AT-108Audi / VW CVT.
■ 10 pieces. head 1/4 "(6 PT) 4, 5,
6, 7, 8, 9, 10, 11, 12, 13 mm;
 4 pcs. Hluboka head 1/4 "(6 PT)
8, 10, 12, 13 mm;
 6 pcs. head TORX 1/4 ": E4, E5,
E6, E7, E8, E10;
 2 pcs. head TORX 1/2 ": E12,
E14;
 14 units. head 1/2 "(6 PT): 10,
12, 13, 14, 15, 17, 18, 19, 21,
22, 24, 27, 30, 32 mm;
 1 pc. ratchet drill 1/4 - 72 teeth ";
 1 pc. cardan 1/4 ";
 1 pc. reamer holder 1/4 "150
mm;
 1 pc. extension 1/4 "to 50 mm;
 1 pc. cardan 1/4 ";
 1 pc. flexible extension 1/4 '' 150
mm;
 1 pc. reamer holder floating 113
mm;
 1 pc. ratchet drill 1/2 - 72 teeth "
 2 pcs. extension 1/2 "125 mm
and 250 mm;
 1 pc. cardan 1/2 ";
 1 pc. candle head 1/2 "14mm
(RT 12);
 2 pcs. candle head 1/2 "16mm
(6RT) and 21 mm (6RT);
 1 pc. adapter 3/8 "(F) x 1/2" (M);
 20 pcs. bits 1/4 ": (S2);
4 pcs. SPLINE: M6, M8, M10, M12;
7 pcs. TORX: T10, T15, T20, T25, T27,
T30, T40;
3 pcs. PH: PH1, PH2, PH3;
6 pcs. HEX: 1.5, 2, 3, 4, 5, 6 mm;
 10 pcs. throw-horny keys: 8, 10,
12, 13, 14, 15, 17, 19, 21, 24
mm
 1 pc. pliers 7 ";
 1 pc. movable pliers 250 mm;
 1 pc. hammer 500 g .;
 6 pcs. screwdriver;
 3 pcs. PH: PH1 x 75 mm, PH2 x
100 mm, PH3 x 150 mm;
 3 pcs. SL: 3 x 75 mm, 6.5 x 38
mm (shortened), 6.5 x 100 mm.
DIGITAL
DESIGNS
UKRAINE
ENERGOME
REZHA
1.Side
footboards for
buses, jeeps and
commercial
vehicles
2.Railing production and
imports
3.Covers for
panel
1.Engine oil
YACCO
GALAXIE GT
5W50
About 25 types of modes for all cars.
Wood, carbon or metal like decoration.
Fully synthetic motor oil based on PAO
and esters for engines of sports and
racing cars. Products of YACCO
GALAXIE series engines are used by its
fireballs athletes rally team EMAP
YACCO"- Rally Champion of France
2013 and 2014.
GIRAFF,
TRADE
NETWORK
2.Transmission
oil YACCO ATF
X
Synthetic fluid for automatic
transmissions that meets multiple
specifications, such as Allison; BMW;
FORD MERCON; MB; DEXRON;
NISSAN; TOYOTA; MAZDA; SUBARU;
VOLVO and many others.
3.Brake fluid
YACCO Racing
Brake Fluid
100% synthetic brake fluid for use in
competition. The product does not
contain some kind of Silicon and is
compatible with all synthetic brake fluids
DOT 3, DOT 4, DOT 5.1. The boiling
point exceeds 300 ᵒC.
1.Shumoоff Mix
F
The flagship of the range. The best
vibration absorption material has the
highest noise reduction coefficient. The
multilayer composite self-adhesive
material on the basis of special grade
bitumen. Between the layers of asphalt
to withstand freezing temperatures,
there is a reinforcing layer does not
allow to break the material, even in the
case of fracture of one of the layers. As
the adhesive used highly filled polymer
composition based on rubber,
reinforced with aluminum foil embossing
original. This makes it possible to
effectively dampen noise even on the
structures of more than 3 mm.,
Including metal stairs and doors. The
strength of material adhesion to the
mounting surface - not less than 5 N /
cm².
Application: bottom, tunnel, wheel
arches, engine shield, luggage
compartment floor.
specific weight - 5.6 kg / m²
 range of working temperatures: 30 ° C / + 110 ° C
 material thickness - 4 mm
 effectively the grommet on the
metal - up to 3 mm
 coefficient of noise reduction 92%
 using with acoustics installation
 the best in its class.
2.Shumoоff L3
Multi-layer, self-adhesive, vibration
absorption material. Designed to
reduce the noise of plastic and
metal panels with thickness up to 2
mm. - roof, door panels, bottom,
side surface of the car.
Super vibration absorption material,
similar in characteristics to Shumoff
M3. In a complex polymer
(recognizable by the red and the
brown colour) applied as a layer of
mastic, which allows to achieve high
results and weighs half as much as
the competition! The use of this
polymer in the L3 Shumoff and other
lightweight materials to reduce the
weight of an average car noise
insulation (WW Golf) c 70-80 kg and
40-50 kg, with equal project
efficiency. It is available in sheets,
sized 370 x 270 mm.
 specific weight - 3.5 kg / m²;
 range of working
temperatures: -30 ° C / +
110 ° C;
 thickness of the material 3mm;
 effectively the grommet on
the metal - up to 2 mm;
 coefficient of noise reduction
- 88%.
3.Ultimate
AUDIO XSW 18
18″ subwoofer low-frequency
subwoofer
CARFAST
1.15483 –
mounting
molding
threshold clip of
BMW (OEM
07147074343)
2.15486 – clip of
mounting
cladding panels
of BMW, Mini
Cooper (OEM
51717127742)










type: 18 inches
rated power (RMS): 2500 W
resistance: 1 + 1 ohm
sensitivity: 89 db
voice coil: 4 inches!
magnet size: 60 x 220 mm
cart: cast aluminum
cone material: carbon
coil material: aluminum (flat).
dustproof top cap: carbon.
KÄRCHER
3.15524 –
mounting
molding clip of
Hyundai, KIA
(OEM 877562E000)
1.Mobile and
stationary high
pressure
washers
different classes
productivity
heated or
unheated water
equipped with an
electric motor or
internal
combustion
engine
2.Kärcher
vacuum cleaners
Kärcher is associated with innovation,
high performance and high quality. The
company that created the world's first
high-pressure device, is now a leader in
the global market and constantly
working on optimizing method of
cleaning, ensuring greater performance
at lower energy consumption, speed up
treatment and extend the life of
equipment. Kärcher offers the widest
range of innovative products that satisfy
the most diverse requirements: mobile
and stationary high pressure washers
different classes productivity heated or
unheated water equipped with an
electric motor or internal combustion
engine.
The range of vacuum cleaners of
Kärcher is extremely diverse and allows
you to choose the best devices for
companies of all types and sizes - for
cleaning companies, car dealers,
businesses of various industries or
small enterprises. All vacuums of
Kärcher impress with high quality,
durability, innovative filtration
technology and maximum convenience
for the user.
COLUMB
SR
CORPORATI
ON IOI
1.Flags,
banners, flags,
pennants
2.Flagstaff static,
extension type
3.Badges,
awards,
souvenirs
1.ZIC TOP 5W30 – is fully
synthetic
multigrade motor
oil of the highest
quality
Through the use of innovative
components, developed by SK
Lubricants, motor oil ZIC TOP 5W-30
has increased resource utilization and
stability properties. Specially designed
and recommended for use in gasoline
and diesel engines of cars produced by
Volkswagen AG, including soot filters
and catalytic converters, which require
motor oil with specification VW 504.00 /
507.00.
2.ZIC X7 LS
10W-40
synthetic motor
oil of high
quality.
It is made from base oil YUBASE VHVI
(very high viscosity index) and balanced
package of high quality additives from
leading manufacturers.
Meets the requirements for high-quality
motor olyvdlya Japanese, American and
Korean cars that require the highest
categories of motor oil classification API
SM, is allowed European car
manufacturers that impose more
stringent requirements for motor oils:
ACEA A3 / B3, A3 / B4, C3, MB 229.31,
BMW Longlife-01, VW 502.00 / 505.01,
Renault RN 0700.
3.ZIC X5 10W40 – is highquality semisynthetic motor
oil for gasoline
engines in
passenger cars
It is made using YUBASE base oil
produced and balanced package of
modern additives. It ensures engine
protection due to high thermal oxidative
stability of oil ZIC. It has a high standard
specification API SM.
LIGIR-ETBS
1.New range of
fuel-filling
columns Helix
The main intrigue of the event, we will
show the Ukrainian market a new range
of fuel-filling columns Helix
(http://www.ligir.com.ua/ru/press/news/3
62/), produced by Wayne Fueling
Systems - recognized world leader in
the production of technological
equipment for gas stations. On the
stand will feature speakers Helix 5000,
Helix 6000 and Helix LPG. More
information about Helix columns on
http://www.ligir.com.ua/ru/info/azs/trk/.
Helix has successfully serving motorists
in Dniprodzerzhinsk, Dnipropetrovsk
and Novomoskovsk will be next.
3.Fuel tanks
measurement
system
SiteSentinel®
Nano ™
manufactured by
OPW (USA)
Fuel tanks measurement system will
have a special place. Customers will be
able to experiment in the display system
SiteSentinel® Nano ™ manufactured by
OPW (USA). This decision is currently
the best for the domestic market in
terms of price and quality. More
information about the measuring system
from OPW is available in the updated
page
http://www.ligir.com.ua/ru/info/azs/petro
vend/.
Customers will not be able to pass by a
stationary gas tanker SZEM 10
http://www.ligir.com.ua/ru/info/gas_tech
nology/, which is produces by LIGIRETBS
together with Gaztechtrade. Recently,
on our website we have repeatedly
3.Stationary gas
tanker SZEM 10
drawn attention to the growing interest
in the market of sale of liquefied natural
gas. Ligir has everything to convert this
interest into a highly profitable business.
LM-TRADE
4.UPP
technology of
plastic pipe
manufacturing
from Franklin
Fueling Systems
company (USA)
And of course at the booth will feature
samples of well-known by customers
UPP technology of plastic pipe
manufacturing from Franklin Fueling
Systems company (USA)
http://www.ligir.com.ua/ru/info/azs/upp/.
Besides, in May and June it is planned
to supply new batch of pipes. We
accept orders!
Monitoring
system for
liquefied gas
tanker
Monitoring system for liquefied gas
tanker.
The upgraded system is based on
volume-mass meter. With the system
implemented by loading and unloading
tankers. The system can be mounted
on trailers, trailers for transporting
liquefied petroleum gas (LPG).
Features of the system:
 measure the weight of the
product (kg);
 measure the volume of the
product (l);
 measure the density of the
product;
 measure the temperature of the
product;
 fixing the date of shipment and
loading;
 dosage shipment;
 fixing the GPS coordinates;
 video fixation;
 GSM transmission of
measurement data.
So, if you have access to the Internet, it
is possible at any time to get
information about: mass, volume, time
and place of loading and unloading.
This will prevent unauthorized shipping
and significantly save your money time
and nerves.
MASTER
SERVICE
1.Air conditioner
compressors
and
components,
turbines and
their
components
2.Starters,
generators and
their component
parts
3.Steering racks,
power steering
pumps and their
accessories
MACHENTE
CH LLC
1.Valves
grinding
machine of
Comec RV516
(Italy)
2.Machine for
milling under
saddle valve
Mira VGX21P
(Switzerland)
The machine allows you easily restore
worn valve car, its beveled edge and
end, with the two abrasive grinding
wheels machine. Also, the machine has
adjustable speeds of the valve, which
allows you to recover valves with
different degrees of wear factor.
The robust design of the machine and
its reasonable price, allows for service
as the small stations, and at major
service stations. This equipment is wellestablished in Ukraine, and is in great
demand among the masters of engines
repair.
3.Crimping
machine FinnPower P20MS
(Finland)
NETKAM,
factory of
nonwovens
1.PH-300 k. –
autocarpet
2.HRP - graphite
800 W - cloth to
cover the floor
inside the car or
in the trunk
NOVELAK
1.Filling lutting
with the addition
of aluminum
dust
2.Basic filling
lutting
It is used in all areas of hydraulic
equipment repair in general and
automotive hydraulic systems.
Restoration of hydraulic hoses,
reducing of deafeners of various shapes
and designs are possible due Machine
Finn-Power.
Autocarpet, which is produced in
different colours, nice on the touch, has
a different density. This type of
nonwoven geotextiles perfectly
preserves colour saturation, does not
burn, does not attract dust, and in
contact with moisture on its surface is
formed mold. Carpet is widely used at
facing the inside of the car. Thanks to
the excellent elastic properties, material
can be used in working with surfaces of
any shape.
Autocarpet is a leader among low-cost,
high-quality and easy to use materials
for banners of vehicle. Its main
advantage - the opportunity to make
vehicle interior presentable at a
democratic price. Exept refinement of
passenger compartment and trunk, car
carpet is used for efficient audio
processing, because the cloth has
excellent acoustic characteristics.
Cloth to cover the floor inside the car or
in the trunk. The combination of
characteristics, such as layering and
moisture resistance, is important to
prevent and protect the car body
against corrosion. Is not necessary for
the the owner of vehicle provide
anticorrosion actions, moisture will be
removed without problems from internal
surface of car body through transpiring
properties of the material.
Filling lutting with the addition of
aluminum dust, which increases its
resistance to high temperatures and
ensures excellent adhesion. It has less
shrinkage compared to typical putty and
high elasticity.It is used for leveling
large area inequalities.
The relatively small firm and elastic,
recommended mainly for machining and
for use on small surfaces. It has very
good adhesion to different types of
foundations, but is not recommended
for use on galvanized steel. It is used to
repair small surfaces and final finish
leveling the surface before applying of
base coatings. With its perfectly fine
fillers applied thin layers and fills small
scratches and deepening. Makes
possible the processing of fine-grained
sandpaper, resulting in a very smooth
surface is achieved. It has also a very
good adhesion to different types of
foundations, including the galvanized
steel.
NO LIMIT
NEW TON
1.Add-on
devices Depo
Racing
2.Elements of
thermoinsulation
for cars of DEI
3.Filter
cartridges of
K&N
1.PiTon. Brake
pads
cleaner/400 ml.
2.Universal oil
with rust
neutralizer /150
ml, 400 ml.
Without dismantling eliminates
squeaking. An effective tool for cleaning
brake systems from complex pollution.
Without disassembly easily dissolves
and removes carbon deposits, oil,
lubricants, brake fluid, tar, hot spots.
With its powerful jet sent instantly
cleans and degreasing brake discs,
drums, pads, linings, cylinders, clutch
parts, springs. Reduces wear and
heating of brake mechanisms.
Eliminates creaking. Improves braking
performance. Dries quickly without
leaving a trace. It does not oxidize
metal and does not cause corrosion. It
is widely used in industry for cleaning
and garage equipment, parts, tools.
Multi-function oil for integrated service
of any assemblies and mechanisms - at
the same time cleans, lubricates and
serves as protection against corrosion.
Designed for metal and of rubber
surfaces: restores mobility of rusty
threaded connections, enabling quick
and harmless separation of stuck and
keyed nodes of any type of assembly,
easier mounting and dismentling;
lubricates the surface, weakening
dragging and wear; guarantees reliable
corrosion protection; dissolves rust and
scale, displaces moisture, eliminates
creaking prevents freezing.
Neutral for paint, plastic and wood. It
does not evaporate. For street and
house work. Special nozzle easier work
in awkward places. Use for repair and
maintenance of automobiles,
motorcycles, scooters and others. It is
necessary for the care and protection of
industrial equipment.
3.PiTon. New
Ton automotive
enamel for alloy
wheels/ 500 ml.
OPEN
SYSTEM
1юDiagnostic
and auxiliary
equipment for
injectors
COMMON RAIL
CR-JET4-E, CRJET4-M
CR-JET4E
Acrylic enamel for special purposes. It
forms a tough coating with substantially
metalized pigment. It has a high degree
of adhesion and increased covering
index. It has high resistance to abrasive
action of sand blows stones corrosive
effects of water and road reagents. It is
resistant to atmospheric effects and
temperature changes. It does not fade
in the sun. Designed for painting and
restoration refinishing wheels of cars,
buses, motorcycles and other vehicles.
Coverage area depends on the
thickness of the enamel layer – it is 2,53,0 m2. Drying time 7-10 minutes at a
temperature of +250 C.
Diagnostic stand CR-JET4-E is
designed to test injectors CommonRail
from Bosch, Delphi, Denso, Siemens,
the system pressure up to 1800 bar.
Meterage is carried to electronic
measurement system. Programme test
plans are included.
Stand’s features:
 simultaneous testing of 4
injectors;
 electronic devices;
 frequency pulses feed
nozzle opening (60 1500 min-1);
 pulse nozzle opening
(100 - 3000mks);
 temperature control test
liquids in the range 0-100
± 1 ° C;
 adjust the pressure of the
test fluid in the range 0 1800 bar;
 electronic pressure
measurement in the
battery fuel pressure in
the range 0 - 1800 bar;
 temperature control on
each test liquid atomizer;
 protective glass is made
of polycarbonate (h = 10
mm);
 dimensions: width 1100,
height 1700 depth 670
mm.
CR-JET4E complex can be equipped
with software and hardware kit that
allows the assignment of codes
correction nozzles from such
manufacturers as: BOSC H, Delphi
(C2I, C3I), DENSO.
2.DORPAT
Multi-Cam
Complex DORPAT Multi-Cam is
designed for testing and adjustment of
the pump-injector (UI) and pump
sections (UP) during their repair and
maintenance.
The complex can be used to test diesel
engine fuel equipment mild to moderate
road haulage, including high-speed
engines of passenger cars, buses,
trucks and agricultural tractors.
Complex DORPAT Multi-Cam allows
you to test the following types of unit
injectors and a single pump:
 Bosch UIS PDE - unit injector
trucks Scania, Iveco, Volvo, and
as marine, industrial and other
engines of these manufacturers.
 Bosch UIS PDE - unit injector
cars Audi, VW, Land Rover.
 Delphi EUI E1 - unit injector
Volvo truck, Renault, as well as
marine, industrial and other
engines of these manufacturers.
 Delphi EUI E3 - unit injector
Volvo truck, Renault, as well as
marine, industrial and other
engines of these manufacturers.
 Delphi EUP - unit injector DAF
truck.
 Lucas A-type - unit injector (Hshaped) Volvo trucks, as well as
marine, industrial and other
Volvo engines.
 You can check the unit injectors
of the USA manufacturers:
Cummins, Caterpillar, Detroit,
and HPI injection system.
3.CR-NeXT is a
CR-NeXT complex is designed for
PIVENSERVICES
set for repair and
adjustment
solenoid
injectors for
Common Rail
System
accurate and quality assembly system
electromagnetic injector of Common
Rail.
CR-NeXT – is the sequence of
operations with full visualization of the
process and the formation of the
necessary structural dimensions
required for assembly.
1.Removing
dents without
painting (PDR)
The service allows you to remove dents
on a car using special tools and
accessories. After surfacing dent does
not require further painting.
2.Training of
specialists in the
study center to
remove dents
without painting
3.Tools and
accessories for
work on
removing dents
without colouring
RAVENOL
TRADE
1.RAVENOL
FEL SAE 5W-30
It is fully synthetic fluid of easy-flowing
low in mineral oil, which is produced
using technology of CleaenSynto for car
gasoline and diesel engines with pumpturbine and direct fuel injection.
It has particulate filter DPF and catalyst
TCW. It complies with EURO IV, EURO
V. API: SM (ES), ILSAC: GF-3 / GF-4,
ACEA: A5 / B5, C16.
2.RAVENOL
VMO SAE 5W40
It is fully synthetic fluid of easy-flowing
low in mineral oil, which is produced
technology CleaenSynto for car
gasoline and diesel engines. It has
particulate filter DPF and catalyst TCW.
It complies with EURO IV, EURO V.
API: SM (CF), ILSAC: ACEA: A3 / B4,
C3.
It is synthetic gear oil for 5-speed
automatic transmissions Mercedes
Benz 6th and 7th series AG722-6 and
AG722-7 MB 236.10 Chrysler
52107891A.
It is made recovery of valve (multiplier)
and dimensional recovery circuit and
depending on the fault sprayer is being
replaced with new one. With a strong
manufacturing base company almost
does not change the details of the new
3.RAVENOL
ATF M 6-Serie
SAVDIESEL
1.(7.png, 8.png,
9.png, 10.png).
Diagnosis and
repair on the
bench Common
Rail injector
system with an
electromagnetic
or piezoelectric
actuator
2.(2.png,3.png,
4.png, 5.png,
6.png).
Diagnosis and
repair of pump
nozzles pump
sections and
nozzles EURO
2,3,4,5
THINK
THINGS
TRADING
SLOBOZHA
NSKAYA
TECHNOLO
GY
COMPANY
PTS
compression
bumper
1.Mastic
ACOUSTICS
(M) AP
and old efficiently recovers, which
positively affects both the quality and
the cost of repairing diesel injectors.
Maintenance is performed with using
the newest exclusive technology with
help of specialized precision
instruments. During the repairs carried
out full restoration and valve seat,
reduced plant dimensional chain and
being replaced for a new sprayer. At the
final stage of repair is monitoring the
stand CAM BOX under different
operating conditions and maximize
aligned supply kit as a whole.
It is the unique innovative product,
which is installed in the car springs and
provides comfort and safety while
driving, or to reduce the operating costs
of the vehicle when driving on bad
roads.
TTC compression bumper - is the most
inexpensive suspension part for all car
models, proven on millions of cars
around the world. It is produced by
Think Think Cars (South Korea) for
more than 20 years and is delivered in
40 countries.
It is used for corrosion protection of
vehicles, metal structures and
facilities. It also has sound-deadening
and vibration-absorbing properties. It is
applied with a spatula on a dry,
degreased, clear from dust, dirt, rust
surface. After drying forms on the
2.Vibration
isolation
MAXLEVEL V2
700x500x2,3mm
3.Anti squeal
ACOUSTICS
STARLEKS
UKRAINE
1.Mounting
wheels
2.Wheel keys
3.Spacers and
adapters
TLX
TRADING
1.Radiator
cooling systems
to any car of
DOLPHIN
treated surface protective layer is
sturdy, resistant to mechanical stress. If
necessary, before use permitted dilution
solvent or petroleum naphtha.
Recommended application temperature
is 18 ° C. Consumption: 1,2 - 1,5 kg of
mastic on 1 sq.m. when applied to a
layer thickness of 1 mm.
It is self-adhesive rubber material on the
basis of layer of 2,3 mm. Front side
reinforcing foil embossed 100mkm,
making it easy to mount the most
difficult material surface. Scope: chuck
flap, doors, roof, floor, wheel arches,
trunk, hood space.
Anti squeal ACOUSTICS - filling
material in the form of ribbons of
synthetic fabric with sticky layer. It is
used in places contiguity plastic parts to
the body and another. The possible use
in the gaps between the decorative
elements of interior and car body,
instrument panel, seal duct to eliminate
squeaks. Available in tape width of 20
mm and a length of 1.75 m / s.
Screws and bolts that are used for
mounting of vehicle wheel discs and
ensure their secure fit.
Bolts or screws with unique pattern to
prevent the theft of the wheels of the
car.
Croducts which are changing settings
alloy wheels and adjusting their
position. Spacers and adapters are
widely used in racing and tuning cars as
improve vehicle handling as well as its
attractiveness.
Radiator cooling systems to any car of
DOLPHIN brand are in the company’s
storage. TLX Trading is the official
distributor in Ukraine of plant, producing
cooling radiators Dolphin Manufacturing
LTD. (UAE).
2.The range of
filters of MK
FILTER
The range of filters of MK FILTER is
continuously expanding. MK FILTER
owns the largest South Korean
manufacturer MK Filter Co., Ltd, located
in Seoul (Korea). Filters for the world
car industry are produced under this
brand. TLX Trading is an exclusive
representative of this brand in Ukraine.
3.Full range of
original and nonoriginal spare
parts for
servicing of
Toyota-Lexus
TURBINA
1.New turbines,
new cartridges
for all types of
turbines,
components for
turbocharges
2.Machines for
the regulation of
electronic and
vacuum
actuators
UKRAUTOG
IDRAVLIKA
1.Tester for
electric steering
mechanisms
Tester for electric steering mechanisms.
There will be functional test of steering
mechanisms at the exhibition.
UKR-CHINA
COMMUNIC
ATION
2.Steering rack
of Mazda 6
Steering rack of Mazda 6 – is an electric
steering rack, presented for sale and
repair.
3.High pressure
stuffing-boxes
High pressure stuffing-boxes – are the
components for repair of steering racks,
power steering pumps and steering
gears.
1.«Comprehensi
ve support
contracts»
service
Service includes:
• search goods manufacturer in China,
the choice of manufacturer, which is
based on customer’s needs;
• factories review;
• negotiating and representing business
interest of the client in the territory
China;
• drafting and signing a legally
competent contract with Chinese
partner;
• monitoring the timeliness and
accuracy of payments, check the
validity of documents;
• in the way insurance of goods;
• optimal method of delivery to Ukraine sea container, modular cargo,
air (dates, price);
• qualified customs clearance of goods;
• obtaining necessary permits;
• delivery of the goods to the recipient;
• providing a package of documents.
2.«Delivery of
goods» service
Service includes:
• delivery of cargo from door to door
manufacturer client (sea, air, land
vehicles);
• delivery of small loads;
• control the timing of shipment.
Service includes:
• preliminary calculation of the economy
of supply and develop the optimum
scheme of delivery;
• the purchase and transfer of currency;
• optaining of permits;
• yytne design for optimum scheme;
• providing customer documents for the
sale of products in Ukraine.
FAR
UKRAINE
FORCE
AVTO
1.Lube oil-gas
shock absorber
for Skoda Fabia
Low-temperature butter and
strengthening rods is used in shock
absorber to continue shock in terms of
Ukrainian roads.
2.Brake pads
are used in
Mazda 3
Pads are produced in accordance with
the German technology and using the
modern German equipment, provide
good stopping car abilities, and ensure
longer service life of the brake discs.
3.Ignition coils
for Nissan
Qashqai
In manufacturing of coil it is used highly
reliable electronic components of
Korean production.
1.Tool trolleys
and special tools
for autoservice
2.Hand tool
3.Pneumatic tool
4.Universal sets
of tools
FORSAGE,
EPE
Roof racks
«Kangaroo»
(Ukraine)
Roof racks «Kangaroo» (Ukraine) - an
excellent choice for your car. High
quality, reasonable price, as well as
their versatility allows them to be a
leader on the Ukrainian market. Here is
a roof rack for your vehicle.
Freight platforms and baskets for
«Kangaroo» (Ukraine) are designed for
transportation of various cargoes. Have
an increased carrying capacity, are
suitable for any type of rail bars.
http://kenguru.prom.ua/g2779148bagazhniki-kryshu-kenguru
http://kenguru.prom.ua/g2779169korziny-kryshu-avtomobilya
CHINACARS
1.CDN
CDN company - is a leader in the
production of spare parts for Chinese
cars. During 7 years CDN proves that
quality is the principal component of its
popularity in the Ukrainian market.
Reasonable price – this is the second
reason why CDN is interesting to
customers. And the guarantee applies
to the whole range of CDN products.
Spare parts for Chinese cars. Quality –
German, prices - Ukrainian. The
company produces, springs, rollers,
brake pads and filters (oil, air, fuel). It
manufactures spare parts for 90% of
CHERY and GEELY product range.
MOGEN offers multistage protection of
spare parts, that helps to eliminate
counterfeit. The company offers the
best quality for the reasonable price at
the auto parts market. Product range of
MOGEN is constantly being increased.
MADE in GERMANY.
2.MOGEN