royce cnc

Transcription

royce cnc

SATISFACTION GUARANTEED
Limited Warranty
Custom Items
All items in the Royce//Ayr catalogue, unless otherwise
noted, are warranted for 90 days against defects in
workmanship and materials. Normal wear and tear or
use of a tool for other than the intended purpose is not
covered by this warranty. Merchandise may be returned
to Royce//Ayr Cutting Tools for repair or replacement at
our option. Royce//Ayr liability is limited to repair or replacement of the merchandise. In no event shall
Royce//Ayr be liable for any incidental or consequential
damages.
Custom items are those that are made to our customer’s
specifications and are not normally carried by
Royce//Ayr or the manufacturer. The customer is responsible to make sure his specifications meet his
needs. These items cannot be returned unless there is
a defect in workmanship or materials.
Special Items
Special items are those not in the Royce//Ayr catalogue
and are special ordered for the customer. These items
are covered by our limited warranty. If a special item is
defective, it is covered like any other catalogue item.
No Sale is Final
If you have a problem with an order you placed with
Royce//Ayr, please call. We want you to be satisfied with
our products and service.
INDUSTRIAL CUTTING TOOLS IN HSS, CARBIDE AND DIAMOND
TABLE OF CONTENTS
Description
Page
Material usage and feed rate chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Solid Carbide Router Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-26
Diamond Drill Bits
.......................................................................
27
Diamond Tipped Router Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-36
Insert Router Bits
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-45
Tool Holders and Collets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-51
Shrink Fit Tool Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
Tool Holder Clean-up Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
1
Wood Router Material Usage and Feed Rates
TOOL
DESCRIPTION
Laminated
Soft
Laminated
Particle
Ductile
Plywood
Board
Plastics
Hard
Fiber
Solid
Plastic
Brittle Reinforced Surface Laminated Aluminum
Plastics Plastics Materials Materials
Soft
Woods
Hard
Woods
Soft
Hard
Plywood Plywood
Particle
Board
1 Flute Straight “V” Flute
100-300
100-250
100-250
100-250
100-250
~
~
~
~
~
~
~
~
1 Flute Straight “O” Flute
100-300
~
~
~
~
~
~
350
300
~
~
~
~
1 FLUTE ROUTERS
1 Flute Straight “O” Flute
(Soft Or Hard Plastics)
~
~
~
~
~
~
~
350
300
~
~
~
~
150-300
150-300
~
~
150-300
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
200
~
100-180
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
150
150
~
150-180
~
~
150-300
150-300
~
~
150-300
~
~
~
~
~
~
~
~
150-300
150-300
~
~
150-300
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
150
~
~
100
~
~
~
~
~
~
~
150
150
~
100-180
~
~
1 Flute Compression Spiral
100-600
100-600
100-600
100-600
100-500
100-600
100-600
~
~
~
~
~
~
1 Flute Mortise Compression Spiral
100-600
100-600
100-600
100-600
100-500
100-600
100-600
~
~
~
~
~
~
200-400
200-400
200-400
200-400
200-400
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
250
150
~
~
~
~
~
~
~
~
~
~
~
250
150
150-200
~
~
~
~
~
~
~
~
~
~
250
150
150-200
~
~
200-450
200-400
~
~
200-450
~
~
200
~
~
150-200
~
~
~
~
~
~
~
~
~
~
~
150
150-200
~
150
200-450
200-400
~
~
200-450
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
275
250
~
150
~
~
~
\
~
1 Flute Upcut Spiral
1 Flute “O” Flute Upcut Spiral
(Soft Plastics)
(Hard Plastics & Aluminum)
(Hard Plastics)
1 Flute Downcut Spiral
1 Flute “O” Flute Downcut Spiral
(Hard Plastics)
(Soft Plastics)
100
150
2 FLUTE ROUTERS
2 Flute Straight Cut
(Natural Wood & Hard Plastics)
2 Flute Straight Cut (Hard Plastics)
2 Flute “O” Flute Straight Cut
(Soft Plastics)
(Hard Plastics)
2 Flute Upcut Spiral (High Impact)
2 Flute “O” Flute Upcut Slow Spiral
(Soft & Hard Plastics)
Chipbreaker Finisher
2 Flute Upcut Spiral Chipbreaker
Finisher (High Impact)
400-1500 400-1200 400-1400 400-1200 400-1000
~
~
~
~
~
~
~
400-1500 400-1200 400-1400 400-1200 400-1000
~
~
~
~
~
~
~
200-450
200-400
~
~
200-450
~
~
~
~
~
150-200
~
~
~
~
~
~
~
~
~
~
~
150
150-200
~
15
~
~
~
~
~
~
~
300
275
~
150
~
~
200-450
200-400
~
~
2 Flute Downcut Slow Spiral
2 Flute Downcut Spiral (High Impact)
Chipbreaker Finisher
2 Flute Downcut Spiral Chipbreaker
Finisher (High Impact)
200-450
~
~
~
~
~
~
~
~
400-1500 400-1200 400-1400 400-1200 400-1000
~
~
~
~
~
~
~
~
400-1500 400-1200 400-1400 400-1200 400-1000
~
~
~
~
~
~
~
~
2 Flute Compression
400-1200 400-1000 400-1200 400-1000 400-800 400-1200 400-1000
~
~
~
~
~
~
2 Flute Chipbreaker Finisher
Compression
400-1500 400-1200 400-1400 400-1200 400-1000 400-1400 400-1200
~
~
~
~
~
~
2 Flute Compression (High Wear)
400-1200 400-1000 400-1200 400-1000 400-800 400-1200 400-1000
~
~
~
~
~
~
2 Flute Mortise Compression
400-1200 400-1000 400-1200 400-1000 400-800 400-1200 400-1000
~
~
~
~
~
~
2
TOOL
DESCRIPTION
Soft
Hard
Plywood Plywood
Particle
Board
Laminated
Soft
Laminated
Particle
Ductile
Plywood
Board
Plastics
Hard
Fiber
Solid
Plastic
Brittle Reinforced Surface Laminated Aluminum
Plastics Plastics Materials Materials
Soft
Woods
Hard
Woods
3 Flute Upcut Slow Spiral Finisher
200-600
200-500
~
~
200-500
~
~
~
300
~
100-300
~
~
3 Flute Downcut Slow Spiral Finisher
200-600
200-500
~
~
200-500
~
~
~
300
~
100-300
~
~
500-1600 500-1500 700-1800 700-1600 600-1200
~
~
~
~
~
~
~
~
500-1600 500-1500 700-1800 700-1600 600-1201
~
~
~
~
~
~
~
~
~
~
~
~
150
~
~
~
3 FLUTE ROUTERS
3 Flute Upcut Spiral Chipbreaker
Finisher
3 Flute Downcut Spiral Chipbreaker
Finisher
(Hard Plastics)
~
~
~
~
~
3 Flute Upcut Slow Helix Ripper
700-1200 700-1200 700-1500 700-1500 600-1500
~
~
~
~
~
~
~
~
3 Flute Upcut Spiral High Helix Ripper
700-1200 700-1200 700-1500 700-1500 600-1500
~
~
~
~
~
~
~
~
700-1200 700-1200 700-1500 700-1500 600-1500
~
~
~
~
~
~
~
~
3 Flute Upcut Spiral Hogger
(High Impact)
(Hard Plastics)
3 Flute Downcut Slow Helix Ripper
3 Flute Downcut Spiral High Helix
Ripper
3 Flute Downcut Spiral Hogger
(High Impact)
~
~
~
~
150
~
~
~
700-1200 700-1200 700-1500 700-1500 600-1500
~
~
~
~
~
~
~
~
~
~
~
~
~
700-1200 700-1200 700-1500 700-1500 600-1500
~
~
~
~
~
~
~
~
700-1200 700-1200 700-1500 700-1500 600-1500
~
~
~
~
~
~
~
~
3 Flute Compression
400-1200 400-1000 400-1200 400-1000 400-800 400-1200 400-1000
~
~
~
~
~
~
3 Flute Compression (High Wear)
400-1200 400-1000 400-1200 400-1000 400-800 400-1200 400-1000
~
~
~
~
~
~
400-1200 400-1000 400-1200 400-1000 400-800 400-1200 400-1000
~
~
~
~
~
~
4 FLUTE ROUTERS
(Hard Plastics)
4 Flute Upcut Combination Spiral (High
Speed)
(Hard Plastics)
4 Flute Downcut Combination Spiral
(High Speed)
~
~
~
~
~
1000-1800 1000-1800 1200-3000 1200-2800 1000-2000
~
~
~
~
~
1000-1800 1000-1800 1200-3000 700-2200 1200-2800
~
~
~
~
100-300
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
150
~
~
~
~
~
~
~
~
~
~
~
700-2400
4 Flute Compression
500-1600
700-2200
~
~
~
~
~
~
4 Flute Combination Compression
1000-1800 1000-1800 1200-3000 1200-2800 1000-2000 1200-3000 1200-2800
~
~
~
~
~
~
500-1600
500-1500
700-2400
700-2200
600-1600
700-2400
700-2200
~
~
~
~
~
~
~
~
~
~
~
~
~
~
~
125
~
~
~
~
~
~
~
~
~
~
~
~
125
~
~
~
~
~
~
~
~
~
~
~
~
Hand Feed
~
~
~
~
~
~
~
~
~
~
~
~
Hand Feed
~
~
~
500-1500
700-2400
700-2200
600-1600
SPECIALTY TOOLS
Diamond Burr Fiberglass Finisher
(Hard Plastics)
2 Flute Diamond Burr Fiberglass Finisher
(Hard Plastics)
Flush Trim Laminate Bit
(Plastic Laminates)
7 Degree Bevel Laminate Bit
(Plastic Laminate)
3
Wood Router Technical Information
Crescent Point
Straight Flute vs.
Spiral Routers
Straight flute router bits
are generally used for
routing plastics, and other
soft materials. They are a
great choice for hand
feed operations.
Spiral flute router bits
should only be used in
automatic feed operations. They are good for
use on all materials.
Crescent points are
typically found on 1 flute
router bits. They are
good for both plunging,
and flat bottom cutting.
Fishtail Point
Fishtail points are the
most commonly seen end
points in the wood router
industry. They are perfect
when a rigid plunge point
is required.
Endmill Point
Endmill points are most
often found on 3 and 4
flute routers. They are
good for achieving
smooth finish on a flat
bottom surface, and are
commonly used in the
plastic routing industry.
Flute Types
1 Flute routers are a good choice for soft materials.
They provide a good finish, and are capable of faster
feed rates.
2 Flute routers work well with harder materials,
providing an excellent finish to the material.
Upcut, Downcut, and Compression Bits
Upcut routers are used when a good bottom finish is
desired on the material. Chips flow in an upward
direction.
Downcut routers produce the best finish to the top of
the material. Chips flow in a downward direction.
Compression routers are best used when both top,
and bottom finish are important. They are best used
with material that has laminate on both the top, and
bottom. Chips flow in a sideways direction.
4
Material Finish - Top: Good
Material Finish - Bottom: Good
End Point Type: Crescent
(Soft or Hard Plastics)
Part #
D1
L1
D2
L2
R61-01001
1/8
5/16
1/4
2
R61-01002
1/8
1/2
1/4
2
R61-01003 LH
1/8
1/2
1/4
2
R61-01004
1/8
5/8
1/4
4
R61-01005
1/8
1/2
1/8
2
R61-01006
1/8
5/8
1/8
3
R61-01009
5/32
9/16
1/4
2
R61-01014
7/32
5/8
1/4
2-1/2
R61-01010
3/16
3/8
1/4
2
R61-01011
3/16
5/8
1/4
2
R61-01012 LH
3/16
5/8
1/4
2
R61-01013
3/16
1
1/4
4
R61-01007
3/16
5/8
3/16
2-1/2
R61-01015
1/4
3/8
1/4
2-1/2
R61-01016
1/4
3/4
1/4
2-1/2
R61-01017 LH
1/4
3/4
1/4
2-1/2
R61-01018
1/4
3/4
1/4
3-1/2
R61-01019 LH
1/4
3/4
1/4
3-1/2
R61-01020
1/4
1
1/4
3-1/4
R61-01008
1/4
1-1/4
1/4
4
R61-11022
3/8
5/8
3/8
2-1/2
R61-11023
3/8
7/8
3/8
2-1/3
R61-11024
3/8
1-5/8
3/8
6
R61-11025
1/2
1
1/2
3
R61-11026
1/2
1-5/8
1/2
4
R61-11027
1/2
2-1/8
1/2
6
LH = Left Hand Rotation
1 Flute “V” Flute Straight Cut
Material Finish-Top: Good
Material Finish-Bottom: Good
Cutting Edge Tolerance: +.000 -.003
Shank Tolerance: H6
Part #
D1
L1
D2
L2
R61-21001
1/8
1/2
1/4
2
R61-21002
3/16
3/4
1/4
2
R61-21003
1/4
7/8
1/4
2-1/2
R61-21004
1/4
1
1/4
2-1/2
R61-31005
5/16
1-1/8
5/16
3
R61-31006
3/8
1-1/8
3/8
3
R61-31007
1/2
1-1/8
1/2
3
D1 - Cutting Diameter • L1 - Cutting Length • D2 - Shank Diameter • L2 - Overall Length
5
Material Finish-Top: Poor
Material Finish-Bottom: Excellent
End Point Type: Endmill
Helix Angle: 30°
Part #
D1
L1
D2
L2
R63-22101
1/8
1/2
1/4
2
R63-22102
3/16
3/4
1/4
2
R63-22103
1/4
7/8
1/4
2-1/2
R63-22104
1/4
1
1/4
2-1/2
R63-32105
5/16
1-1/8
5/16
3
R63-32106
3/8
1-1/8
3/8
3
R63-32107
1/2
1-1/8
1/2
3
Helix Angle: 30°
(Soft Plastics)
(Hard Plastics and Aluminum)
Part #
D1
L1
D2
L2
R63-02001
1/8
1/2
1/4
2
R63-02002
5/32
9/16
1/4
2
R63-02003
3/16
5/8
1/4
2
R63-02004
7/32
5/8
1/4
2-1/2
R63-02005
1/4
3/4
1/4
2-1/2
R63-02006
9/32
3/4
3/8
2-1/2
R63-12007
5/16
1-3/16
3/8
2-1/2
R63-12008
3/8
7/8
3/8
2-1/2
R63-12009
7/16
1
1/2
3
R63-12010
1/2
1
1/2
3
Helix Angle: 21°
Shank Tolerance: H6
6
(Soft Plastics)
Part #
D1
L1
D2
L2
R63-71701
1/16
1/4
1/8
2
R63-71702
1/16
1/4
1/4
2
R63-71703
1/8
1/4
1/8
2
R63-71704
1/8
1/4
1/4
2
R63-71705
1/8
1/2
1/8
2
R63-71706
1/8
1/2
1/4
2
R63-71707
5/32
9/16
1/4
2
R63-71708
3/16
3/8
3/16
2
R63-71709
3/16
3/8
1/4
2
R63-71710
3/16
5/8
1/4
2
R63-71711
7/32
3/4
1/4
2-1/2
R63-71715
1/4
3/8
1/4
2
R63-71712
1/4
3/4
1/4
2-1/2
R63-71713
1/4
1-1/4
1/4
3
R63-71714
3/8
1-1/8
3/8
3
Helix Angle: 21°
(Hard Plastics)
Part #
D1
L1
D2
L2
R63-71609
1/16
1/4
1/8
2
R63-71601
1/16
1/4
1/4
2
R63-71610
1/8
1/4
1/8
2
R63-71611
1/8
1/2
1/8
2
R63-71602
1/8
1/4
1/4
2
R63-71603
1/8
1/2
1/4
2
R63-71612
3/16
3/8
3/16
2
R63-71613
3/16
5/8
3/16
2
R63-71604
3/16
3/8
1/4
2
R63-71605
3/16
5/8
1/4
2
R63-71614
1/4
3/8
1/4
2
R63-71606
1/4
3/4
1/4
2-1/2
R63-71607
1/4
1-1/4
1/4
3
R63-71608
3/8
1-1/8
3/8
3
Material Finish-Top: Excellent
Material Finish-Bottom: Poor
Helix Angle: 30°
Part #
D1
L1
D2
L2
R62-21901
1/8
1/2
1/4
2
R62-21902
3/16
3/4
1/4
2
R62-21903
1/4
7/8
1/4
2-1/2
R62-21904
1/4
1
1/4
2-1/2
R62-31905
5/16
1-1/8
5/16
3
R62-31906
3/8
1-1/8
3/8
3
R62-31907
1/2
1-1/8
1/2
3
Helix Angle: 30°
Shank Tolerance: H6
Part #
D1
L1
D2
L2
R62-01801
1/8
1/2
1/4
2
R62-01802
1/4
3/4
1/4
2-1/2
R62-11803
5/16
13/16
3/8
2-1/2
R62-11804
3/8
7/8
3/8
2-1/2
7
Helix Angle: 21°
Part #
D1
L1
D2
L2
R62-71501
1/8
1/2
1/8
2
R62-71502
1/8
1/2
1/4
2
R62-71503
3/16
5/8
3/16
2
R62-71504
3/16
5/8
1/4
2
R62-71505
1/4
3/4
1/4
2-1/2
R62-71506
1/4
1-1/4
1/4
3
R62-71507
3/8
1-1/8
3/8
3
Helix Angle: 22°
(Soft Plastics)
(Hard Plastics)
Part #
D1
L1
D2
L2
R62-71408
1/8
1/2
1/8
2
R62-71401
1/8
1/2
1/4
2
R62-71402
5/32
9/16
1/4
2
R62-71409
3/16
5/8
3/16
2
R62-71403
3/16
5/8
1/4
2
R62-71404
7/32
3/4
1/4
2-1/2
R62-71405
1/4
3/4
1/4
2-1/2
R62-71406
1/4
1-1/4
1/4
3
R62-71407
3/8
1-1/8
3/8
3
1 Flute Compression Spiral
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-11201
1/8
3/8
1/4
2-1/2
R60-11202
3/16
5/8
1/4
2-1/2
R60-11203
1/4
7/8
1/4
2-1/2
R60-11204
3/8
1-1/8
3/8
3
R60-11207
1/2
1
1/2
3
R60-11209
1/2
1-1/8
1/2
3
R60-11211
1/2
1-3/8
1/2
3-1/2
R60-11212
1/2
1-5/8
1/2
3-1/2
R60-11213 LH
1/2
1-5/8
1/2
3-1/2
R60-11214
5/8
2-1/4
5/8
4
R60-11215
3/4
2
3/4
4
Shank Tolerance: H6
8
1 Flute Compression Hard Surface
Part #
D1
L1
D2
L2
R60-11208
1/2
1
1/2
3
Helix Angle: 30°
1 Flute Compression Hard Wood
Part #
D1
L1
D2
L2
R60-11210
1/2
1-1/8
1/2
3
Helix Angle: 30°
1 Flute Mortise Compression Spiral
Helix Angle: 30°
Part #
D1
L1
Mortise
D2
L2
R60-11901
1/4
7/8
.175
1/4
2-1/2
R60-11902
3/8
7/8
.188
3/8
3
R60-11903
1/2
7/8
.200
1/2
3
R60-11904
1/2
7/8
.200
1/2
3
R60-11905
1/2
1-5/8
.200
1/2
3-1/2
1 Flute Compression Ballnose Wood Router
Part #
D1
L1
D2
L2
R60-11203B
R60-11209B
1/4
7/8
1/4
2-1/2
1/2
1-1/8
1/2
3
1 Flute Straight “O” Flute Edge Rounding
Helix Angle: 30°
Shank Tolerance: H6
Part #
D1
L1
D2
L2
Opening
R66-02001
1/4
3/8
1/4
2-1/2
5/32
1/8
.195
1/16
R66-02002
1/4
3/8
1/4
2-1/2
7/32
3/16
.180
1/16
R66-02003
1/4
3/8
1/4
2-1/2
9/32
1/4
.163
1/16
Radius
Small Dia. Tip to Radius
9
1 Flute Spiral “O” Flute Edge Rounding
Helix Angle: 30°
Part #
D1
L1
D2
L2
Opening
Radius
R66-02101
1/4
3/8
1/4
2-1/2
5/32
1/8
.195
1/16
R66-02102
1/4
3/8
1/4
2-1/2
7/32
3/16
.180
1/16
R66-02103
1/4
3/8
1/4
2-1/2
9/32
1/4
.163
1/16
1 Flute Veining Bit
Helix Angle: 30°
Part #
D1
L1
D2
L2
R16-52710
1/16
1/4
1/4
1-1/2
R16-52711
3/32
1/4
1/4
1-1/2
R16-52712
1/8
1/4
1/4
1-1/2
2 Flute Straight Flute “V” Bottom
End Point Type: Fishtail
Part #
D1
L1
D2
L2
R37-51301
3/16
5/8
1/4
2
R37-51302
1/4
3/4
1/4
2
R37-51303
3/8
3/4
3/8
2-1/2
Part #
Shank Tolerance: H6
10
D1
L1
D2
L2
R56-01801
1/8
1/4
1/4
2
R56-01802
3/16
3/8
1/4
2
R56-01803
3/16
5/8
1/4
2
R56-01804 LH
3/16
5/8
1/4
2
R56-01805
3/16
5/8
1/4
4
R56-01806
1/4
3/8
1/4
2-1/2
R56-01807
1/4
3/4
1/4
2-1/2
R56-01808 LH
1/4
3/4
1/4
2-1/2
R56-01809
1/4
1-1/4
1/4
4
R56-11810
3/8
5/8
3/8
2-1/2
R56-11811
3/8
7/8
3/8
2-1/2
R56-11812 LH
3/8
7/8
3/8
2-1/2
R56-11813
3/8
1-5/8
3/8
6
R56-11814
1/2
1
1/2
3
R56-11815 LH
1/2
1
1/2
3
R56-11816
1/2
2-1/8
1/2
6
Part #
D1
L1
D2
L2
R56-21101
1/8
1/2
1/4
2
R56-21102
5/32
5/8
1/4
2
R56-21103
3/16
3/4
1/4
2
R56-21104
7/32
3/4
1/4
2-1/2
R56-21105
1/4
7/8
1/4
2-1/2
R56-21106
1/4
7/8
1/4
2-1/2
R56-21107
1/4
1
1/4
2-1/2
R56-21108
1/4
1-1/8
1/4
3
R56-21109
9/32
1
5/16
2-1/2
R56-31110
5/16
1-1/8
5/16
3
R56-31111
5/16
1-1/8
1/2
3
R56-31112
3/8
1-1/8
3/8
3
R56-31114
3/8
1-1/4
3/8
3
R56-31115
3/8
1-1/4
1/2
3
R56-31116
7/16
1
1/2
3
R56-31117
1/2
1-1/8
1/2
3
R56-31119
1/2
1-1/4
1/2
3-1/2
R56-31120
1/2
1-5/8
1/2
3-1/2
R56-31122
17/32
1-1/8
1/2
3
R56-31123
5/8
2-1/8
5/8
4
R56-31124
3/4
1-5/8
3/4
4


Shank Tolerance: H6
(Natural Wood and Hard Plastics)
Soft Plastics
11
(Soft Plastics)
Part #
D1
L1
D2
L2
R56-61401
1/8
5/16
1/4
2
R56-61402
1/8
1/2
1/4
2
R56-61403
1/8
5/8
1/4
4
R56-61404
3/16
3/8
1/4
2
R56-61405
3/16
5/8
1/4
2
R56-61406
3/16
1
1/4
4
R56-61407
1/4
3/8
1/4
2-1/2
R56-61408
1/4
1
1/4
2-1/2
R56-61409 LH
1/4
1
1/4
2-1/2
R56-61410
1/4
1
1/4
3-1/4
R56-61411
1/4
1-1/4
1/4
4
R56-61412
3/8
7/8
3/8
2-1/2
R56-61413
3/8
1
3/8
4
R56-61414
1/2
1
1/2
3
R56-61415
1/2
1
1/2
4
R56-61416
1/2
1-3/4
1/2
4
R56-61417
1/2
2-1/8
1/2
6
Shank Tolerance: H6
12
2 Flute Straight “O” Flute Edge Rounding
Part #
D1
L1
D2
L2
Opening
Radius
R66-02201
1/4
3/8
1/4
2-1/2
5/32
1/8
.195
1/16
R66-02202
1/4
3/8
1/4
2-1/2
7/32
3/16
.180
1/16
R66-02203
1/4
3/8
1/4
2-1/2
9/32
1/4
.163
1/16
2 Flute Straight “V” Flute Edge Rounding
Part #
D1
L1
D2
L2
Opening
Radius
R66-12301
3/8
3/8
3/8
2-1/2
5/32
1/8
.320
1/16
R66-12302
3/8
3/8
3/8
2-1/2
7/32
3/16
.305
1/16
R66-12303
3/8
3/8
3/8
2-1/2
9/32
1/4
.288
1/16
R66-12304
3/8
1/2
3/8
2-1/2
13/32
3/8
.255
1/16
R66-12305
1/2
3/8
1/2
3
5/32
1/8
.445
1/16
R66-12306
1/2
3/8
1/2
3
7/32
3/16
.430
1/16
R66-12307
1/2
3/8
1/2
3
9/32
1/4
.413
1/16
R66-12308
1/2
5/8
1/2
3
17/32
1/2
.347
1/16
2 Flute Rout and Chamfer
Shank Tolerance: H6
Part #
D1
L1
D2
L2
R66-21101
1/4
3/16
3/8
2-1/4
R66-21102
3/8
3/16
1/2
3
R66-21103
1/4
1/4
3/8
2-1/4
R66-21104
3/8
1/4
1/2
3
R66-21105
1/4
5/16
3/8
2-1/4
R66-21106
3/8
5/16
1/2
3
13
Helix Angle: 30°
Part #
D1
L1
D2
L2
R52-22801
1/8
1/2
1/4
2
R52-22802 LH
1/8
1/2
1/4
2
R52-22803
5/32
1/2
1/4
2-1/2
R52-22804
5/32
5/8
1/4
2
R52-22893
3/16
3/4
3/16
2
R52-22843
3/16
3/4
1/4
2
R52-22806 LH
3/16
3/4
1/4
2
R52-22807
3/16
3/4
1/4
2-1/2
R52-22808
7/32
3/4
1/4
2-1/2
R52-22809
7/32
1
1/4
2-1/2
R52-22810
1/4
7/8
1/4
2-1/2
R52-22812
1/4
1
1/4
2-1/2
R52-22813 LH
1/4
1
1/4
2-1/2
R52-22814
1/4
1-1/8
1/4
3
R52-22815
9/32
1
5/16
2-1/2
R52-32816
5/16
1-1/8
5/16
3
R52-32817
5/16
1-1/4
5/16
3
R52-32818
5/16
1-1/8
1/2
3
R52-32819 LH
5/16
1-1/8
1/2
3
R52-32820
3/8
1
3/8
3
R52-32821
3/8
1-1/8
3/8
3
R52-32823
3/8
1-1/4
3/8
3
R52-32824 LH
3/8
1-1/4
3/8
3
R52-32825
3/8
1-1/4
1/2
3
R52-32826
7/16
1
1/2
3
R52-32827
1/2
1-1/8
1/2
3
R52-32829
1/2
1-1/4
1/2
3-1/2
R52-32830
1/2
1-5/8
1/2
3-1/2
R52-32831 LH
1/2
1-5/8
1/2
3-1/2
R52-32832
1/2
2-1/2
1/2
5
R52-32833
1/2
2-1/8
1/2
4
R52-32834
17/32
1-1/8
1/2
3
R52-32835
5/8
1-5/8
5/8
3-1/2
R52-32836
5/8
2-1/8
5/8
4
R52-32837 LH
5/8
2-1/8
5/8
4
R52-32838
3/4
1-5/8
3/4
4
R52-32839
3/4
2-1/8
3/4
4
R52-32840 LH
3/4
2-1/8
3/4
4
1
3
1
5
R52-32841
Shank Tolerance: H6
14
Helix Angle: 30°
Part #
D1
L1
D2
L2
R52-02401
1/8
1/2
1/4
2
R52-02402
5/32
9/16
1/4
2
R52-02403
3/16
5/8
1/4
2
R52-02404 LH
3/16
5/8
1/4
2
R52-02405
7/32
5/8
1/4
2-1/2
R52-02406
1/4
3/4
1/4
2-1/2
R52-02407 LH
1/4
3/4
1/4
2-1/2
R52-02408
9/32
3/4
3/8
2-1/2
R52-12409
5/16
13/16
3/8
2-1/2
R52-12410
3/8
7/8
3/8
2-1/2
R52-12411
7/16
1
1/2
3
R52-12412
1/2
1
1/2
3
2 Flute Upcut Spiral Chipbreaker Finisher
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-31201
3/8
1-1/8
3/8
3
R60-31202
1/2
1-1/8
1/2
3
R60-31203
1/2
1-5/8
1/2
3-1/2
R60-31204
1/2
2-1/8
1/2
4
R60-31205
1/2
1-7/8
1/2
3-1/2
R60-31206
5/8
2-1/8
5/8
4
R60-31207
3/4
2-1/8
3/4
4
Helix Angle: 30°
Shank Tolerance: H6
(High Impact)
Part #
D1
L1
D2
L2
R52-92901
1/4
7/8
1/4
2-1/2
R52-92902
3/8
1-1/8
3/8
3
R52-92903
3/8
1-1/4
3/8
3
R52-92904
1/2
1-1/4
1/2
3
15
End Point Type: Plunge
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-91901
3/8
1-1/8
3/8
3
R60-91902
1/2
1-1/8
1/2
3
R60-91903
1/2
1-5/8
1/2
3-1/2
R60-91904
1/2
2-1/8
1/2
4
2 Flute “O” Flute Upcut Slow Spiral
Helix Angle: 11°
(High Impact)
(Soft and Hard Plastics)
Part #
D1
L1
D2
L2
R52-62601
1/4
3/8
1/4
2-1/2
R52-62602
1/4
3/4
1/4
2-1/2
R52-62603
3/8
1
3/8
3
R52-62604
1/2
1-1/8
1/2
3-1/2
2 Flute Upcut Ball Wood Routers
Part #
Helix Angle: 30°
D1
L1
D2
L2
R52-23402
1/8
1/2
1/4
3
R52-23403
3/16
3/4
1/4
2
R52-23404
3/16
3/4
1/4
3
R52-23405
1/4
7/8
1/4
2-1/2
R52-23406
1/4
1
1/4
4
R52-33407
3/8
1-1/8
3/8
3
R52-33408
3/8
1-1/4
3/8
4
R52-33409
1/2
1-1/8
1/2
3
R52-33411
1/2
1-1/2
1/2
5
2 Flute Upcut Bottom Surface
Shank Tolerance: H6
16
Part #
D1
L1
D2
L2
R66-31401
1/8
1/4
1/8
2
R66-31402
1/8
1/4
1/4
2
R66-31403
1/4
3/8
1/4
2
R66-31404
3/8
5/8
3/8
2-1/2
R66-31405
1/2
7/8
1/2
3
Helix Angle: 30°
Part #
D1
L1
D2
L2
R57-22203
1/8
1/2
1/8
2
R57-22201
1/8
1/2
1/4
2
R57-22202 LH
1/8
1/2
1/4
2
R57-22204
5/32
1/2
1/4
2-1/2
R57-22244
5/32
5/8
1/4
2
R57-22206
3/16
3/4
3/16
2
R57-22207
3/16
3/4
1/4
2
R57-22208 LH
3/16
3/4
1/4
2
R57-22209
3/16
3/4
1/4
2-1/2
R57-22210
7/32
3/4
1/4
2-1/2
R57-22211
7/32
1
1/4
2-1/2
R57-22212
1/4
7/8
1/4
2-1/2
R57-22214
1/4
1
1/4
2-1/2
R57-22215 LH
1/4
1
1/4
2-1/2
R57-22216
1/4
1-1/8
1/4
3
R57-22217
9/32
1
5/16
2-1/2
R57-32218
5/16
1-1/8
5/16
3
R57-32219
5/16
1-1/4
5/16
3
R57-32220
5/16
1-1/8
1/2
3
R57-32221 LH
5/16
1-1/8
1/2
3
R57-32222
3/8
1
3/8
3
R57-32223
3/8
1-1/8
3/8
3
R57-32225
3/8
1-1/4
3/8
3
R57-32226 LH
3/8
1-1/4
3/8
3
R57-32227
3/8
1-1/4
1/2
3
R57-32228
7/16
1
1/2
3
R57-32229
1/2
1-1/8
1/2
3
R57-32231
1/2
1-1/4
1/2
3-1/2
R57-32232
1/2
1-5/8
1/2
3-1/2
R57-32233 LH
1/2
1-5/8
1/2
3-1/2
R57-32235
1/2
2-1/8
1/2
4
R57-32236
17/32
1-1/8
1/2
3
R57-32237
5/8
1-5/8
5/8
3-1/2
R57-32238
5/8
2-1/8
5/8
4
R57-32239 LH
5/8
2-1/8
5/8
4
R57-32240
3/4
1-5/8
3/4
4
R57-32241
3/4
2-1/8
3/4
4
R57-32242 LH
3/4
2-1/8
3/4
4
1
3
1
5
R57-32243
Shank Tolerance: H6
17
Helix Angle: 30°°
Part #
D1
L1
D2
L2
R57-02401
1/8
1/2
1/4
2
R57-02402
5/32
9/16
1/4
2
R57-02403
3/16
5/8
1/4
2
R57-02404
7/32
5/8
1/4
2-1/2
R57-02405
1/4
3/4
1/4
2-1/2
R57-02406
9/32
3/4
3/8
2-1/2
R57-12407
5/16
13/16
3/8
2-1/2
R57-12408
3/8
7/8
3/8
2-1/2
R57-12409
7/16
1
1/2
3
R57-12410
1/2
1
1/2
3
2 Flute Downcut Spiral Chipbreaker Finisher
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-31001
3/8
1-1/8
3/8
3
R60-31002
1/2
1-1/8
1/2
3
R60-31003
1/2
1-5/8
1/2
3-1/2
R60-31004
1/2
1-7/8
1/2
3-1/2
R60-31005
1/2
2-1/8
1/2
4
R60-31006
5/8
2-1/8
5/8
4
R60-31007
3/4
2-1/8
3/4
4
Helix Angle: 30°
(High Impact)
Part #
D1
L1
D2
L2
R57-92501
1/4
7/8
1/4
2-1/2
R57-92502
3/8
7/8
3/8
3
R57-92503
3/8
1-1/8
3/8
3
R57-92504
3/8
1-1/4
3/8
3
R57-92505
1/2
1-1/4
1/2
3
2 Flute Downcut Spiral Chipbreaker Finisher (High Impact)
Helix Angle: 30°
Shank Tolerance: H6
18
Part #
D1
L1
D2
L2
R60-91801
3/8
1-1/8
3/8
3
R60-91802
1/2
1-1/8
1/2
3
R60-91803
1/2
1-5/8
1/2
3-1/2
R60-91804
1/2
2-1/8
1/2
4
2 Flute “O” Flute Downcut Slow Spiral (Hard Plastics & Aluminum)
Helix Angle: 11°
Part #
D1
L1
D2
L2
R57-62301
1/4
3/8
1/4
2-1/2
R57-62302
1/4
3/4
1/4
2-1/2
R57-62303
3/8
1
3/8
3
R57-62304
1/2
1-1/8
1/2
3-1/2
2 Flute Compression
End Point: Endmill
Helix Angle:30°
Part #
D1
L1
D2
L2
R60-11409
1/4
7/8
1/4
2-1/2
R60-11401
3/8
7/8
3/8
3
R60-11402
1/2
7/8
1/2
3
R60-11403
1/2
1-1/8
1/2
3
R60-11411
1/2
1-5/16
1/2
3
R60-11404
1/2
1-3/8
1/2
3-1/2
R60-11405
1/2
1-5/8
1/2
4
R60-11410
1/2
2-1/2
1/2
4-1/2
R60-11406
5/8
2-1/4
5/8
5
R60-11407
3/4
1-7/8
3/4
4
R60-11408
3/4
2-1/2
3/4
5
2 Flute Compression

Shank Tolerance: H6
Part #
D1
L1
D2
L2
R60-11301
3/8
7/8
3/8
3
R60-11321
3/8
7/8
3/8
3
R60-11302
1/2
7/8
1/2
3
R60-11322
1/2
7/8
1/2
3
R60-11308
1/2
1-1/8
1/2
3
R60-11303
1/2
1-1/4
1/2
3
R60-11304
1/2
1-3/8
1/2
3-1/2
R60-11305
1/2
1-5/8
1/2
3-1/2

End Point: Endmill
Helix Angle: 30°
(High Wear)
Indicates Mortise Compression
19
End Point: Endmill
Helix Angle: 30°
Part #
D1
L1
Mortise
D2
L2
R60-12001
1/4
7/8
.188
1/4
2-1/2
R60-12002
3/8
7/8
.188
3/8
3
R60-12012
3/8
1-1/8
.188
3/8
3
R60-12005 LH
3/8
1-1/8
.188
3/8
3
R60-12003
1/2
7/8
.200
1/2
3
R60-12004
1/2
1-1/8
.200
1/2
3
R60-12004.3.5
1/2
1-3/8
.200
1/2
3-1/2
2 Flute Chipbreaker Finisher Compression
End Point: Endmill
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-11001
R60-11002
3/8
7/8
3/8
3
3/8
1-1/8
3/8
3
R60-11014
1/2
7/8
1/2
3
R60-11003
1/2
1
1/2
3
R60-11004
1/2
1-1/8
1/2
3
R60-11005
1/2
1-3/8
1/2
3-1/2
R60-11006
1/2
1-5/8
1/2
4
R60-11007
5/8
2-1/4
5/8
5
R60-11008
3/4
1-7/8
3/4
4
2 Flute Ball Round Bottom - Slow Helix
Part #
D1
L1
D2
L2
R38-51351
1/8
3/8
1/4
2
R38-51352
3/16
5/8
1/4
2
R38-51353
1/4
3/4
1/4
2
R38-51354
3/8
3/4
3/8
2-1/4
3 Flute Straight Flute Router
Part #
D1
L1
D2
L2
R53-01301
1/8
1/2
1/4
2
R53-01302
1/4
3/4
1/4
2-1/2
End Point: Endmill
Helix Angle: 30°
Shank Tolerance: H6
20
3 Flute Upcut Spiral Millend
End Point: Endmill
Helix Angle: 30°
(Hard Plastics)
Part #
D1
L1
D2
L2
R58-01201
1/8
1/2
1/4
2
R58-01202
3/16
5/8
1/4
2
R58-01203
1/4
3/4
1/4
2-1/2
R58-01204
3/8
1-1/4
3/8
3
3 Flute Upcut Slow Spiral Finisher
End Point: Endmill
Helix Angle: 10°
Part #
D1
L1
D2
L2
R60-22501
1/4
3/8
1/4
3
R60-22502
1/4
7/8
1/4
3
R60-22503
3/8
5/8
3/8
3
R60-22504
3/8
1-1/8
3/8
3
R60-22507
1/2
1-1/8
1/2
3-1/2
R60-22509
1/2
1-5/8
1/2
4
R60-22510
1/2
2-1/8
1/2
4-1/2
R60-22511
3/4
1-5/8
3/4
4
R60-22512
3/4
2-1/8
3/4
5
End Point: Endmill
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-32101
3/8
1-1/8
3/8
3
R60-32102
1/2
1-1/8
1/2
3
R60-32103
1/2
1-3/8
1/2
3-1/2
R60-32104
1/2
1-5/8
1/2
3-1/2
R60-32105
5/8
1-5/8
5/8
4
R60-32106
3/4
1-5/8
3/4
4
R60-32107
3/4
2-1/4
3/4
4
R60-32108
3/4
3-1/8
3/4
6
3 Flute Upcut Slow Helix Ripper
End Point: Endmill
Helix Angle: 10°
Shank Tolerance: H6
Part #
D1
L1
D2
L2
R60-01601
3/8
1-1/8
3/8
3-1/2
R60-01602
1/2
1-1/8
1/2
3-1/2
R60-01603
1/2
1-5/8
1/2
4
R60-01604
5/8
1-5/8
5/8
4
R60-01605
5/8
2-1/8
5/8
5
R60-01606
3/4
1-5/8
3/4
4
R60-01607
3/4
2-1/8
3/4
5
21
3 Flute Upcut High Helix Ripper
End Point: Endmill
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-01701
3/8
1-1/8
3/8
3-1/2
R60-01703
1/2
1-1/8
1/2
3-1/2
R60-01704
1/2
1-5/8
1/2
4
R60-01705
5/8
1-5/8
5/8
4
R60-01706
5/8
2-1/2
5/8
5
R60-01709
3/4
1-5/8
3/4
4
R60-01710
3/4
2-1/8
3/4
5
3 Flute Upcut Spiral Hogger
End Point: Endmill
Helix Angle: 30°
(High Impact)
Part #
D1
L1
D2
L2
R60-92701
3/8
1-1/8
3/8
3
R60-92702
1/2
1-1/8
1/2
3
R60-92703
1/2
1-5/8
1/2
3-1/2
R60-92704
1/2
2-1/8
1/2
4
Part #
End Point: Endmill
Helix Angle: 30°
D1
L1
D2
L2
R59-01001
1/8
1/2
1/4
2
R59-01002
3/16
5/8
1/4
2
R59-01003
1/4
3/4
1/4
2-1/2
R59-01006
1/2
1-1/2
1/2
3-1/2
3 Flute Downcut Slow Spiral Finisher
End Point: Endmill
Helix Angle: 10°
Shank Tolerance: H6
22
Part #
D1
L1
D2
L2
R60-22301
1/4
3/8
1/4
3
R60-22302
1/4
7/8
1/4
3
R60-22303
3/8
5/8
3/8
3
R60-22310
3/8
1-1/8
3/8
3
R60-22311
1/2
1-1/8
1/2
3-1/2
R60-22312
1/2
1-5/8
1/2
4
R60-22307
1/2
2-1/8
1/2
4-1/2
R60-22313
3/4
1-5/8
3/4
4
R60-22309
3/4
2-1/8
3/4
5
3 Flute Downcut Spiral Chipbreaker Finisher
End Point: Endmill
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-32001
3/8
1-1/8
3/8
3
R60-32002
1/2
1-1/8
1/2
3
R60-32003
1/2
1-3/8
1/2
3-1/2
R60-32004
1/2
1-5/8
1/2
3-1/2
R60-32005
5/8
1-5/8
5/8
4
R60-32006
3/4
1-5/8
3/4
4
R60-32007
3/4
2-1/4
3/4
5
R60-32008
3/4
3-1/8
3/4
6
3 Flute Downcut Slow Helix Ripper
End Point: Endmill
Helix Angle: 10°
Part #
D1
L1
D2
L2
R60-01401
3/8
1-1/8
3/8
3-1/2
R60-01402
1/2
1-1/8
1/2
3-1/2
R60-01404
1/2
1-5/8
1/2
4
R60-01405
5/8
1-5/8
5/8
4
R60-01406
5/8
2-1/8
5/8
5
R60-01407
3/4
1-5/8
3/4
4
R60-01408
3/4
2-1/8
3/4
5
3 Flute Downcut Spiral High Helix Ripper
End Point: Endmill
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-01501
3/8
1-1/8
3/8
3-1/2
R60-01503
1/2
1-1/8
1/2
3-1/2
R60-01504
1/2
1-5/8
1/2
4
R60-01505
5/8
1-5/8
5/8
4
R60-01506
5/8
2-1/8
5/8
5
R60-01509
3/4
1-5/8
3/4
4
R60-01510
3/4
2-1/8
3/4
5
3 Flute Downcut Spiral Hogger
End Point: Endmill
Helix Angle: 30°
Shank Tolerance: H6
(High Impact)
Part #
D1
L1
D2
L2
R60-92201
3/8
1-1/8
3/8
3
R60-92202
1/2
1-1/8
1/2
3
R60-92203
1/2
1-5/8
1/2
3-1/2
R60-92204
1/2
2-1/8
1/2
4
23
3 Flute Compression
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-11501
3/8
1-1/8
3/8
3
R60-11502
1/2
1-1/8
1/2
3
R60-11503
1/2
1-5/8
1/2
3-1/2
R60-11504
3/4
2
3/4
4
3 Flute Compression
Helix Angle: 30°

(High Wear)
Part #
D1
L1
D2
L2
R60-01611
3/8
7/8
3/8
3
R60-01621
3/8
7/8
3/8
3
Mortise compression
Part #
D1
Mortise
L1
D2
L2
R60-12101
3/8
7/8
.200
3/8
3
R60-12102
1/2
7/8
.200
1/2
3
R60-12103
1/2
1-3/8
.200
1/2
3-1/2
R60-12104
3/4
2
.200
3/4
4
3 Flute Upcut Lock Mortise
Helix Angle: 30°
Part #
D1
L1
Depth of Cut
D2
L2
R60-01751
5/8
2
4-1/2
5/8
6-1/2
End Point: Endmill
Helix Angle: 30°
(Hard Plastics)
Part #
D1
L1
D2
L2
R55-01301
1/8
1/2
1/4
2
R55-01302
5/32
9/16
1/4
2
R55-01303
3/16
5/8
1/4
2
R55-01304
1/4
3/4
1/4
2-1/2
4 Flute Upcut Combination Spiral
End Point: Endmill
Helix Angle: 30°
Shank Tolerance: H6
24
(High Velocity)
Part #
D1
L1
D2
L2
R60-71001
1/2
1-1/8
1/2
3-1/2
R60-71002
1/2
1-5/8
1/2
4
R60-71003
1/2
2-1/8
1/2
4-1/2
R60-71004
5/8
2-1/8
5/8
5
R60-71005
3/4
2-1/8
3/4
5
End Point: Endmill
Helix Angle: 30°
(Hard Plastics)
Part #
D1
L1
D2
L2
R54-01101
1/8
1/2
1/4
2
R54-01102
5/32
9/16
1/4
2
R54-01103
3/16
5/8
1/4
2
R54-01104
1/4
3/4
1/4
2-1/2
4 Flute Downcut Combination Spiral
End Point: Endmill
Helix Angle: 30°
(High Velocity)
Part #
D1
L1
D2
L2
R60-71101
1/2
1-1/8
1/2
3-1/2
R60-71102
1/2
1-5/8
1/2
4
R60-71103
1/2
2-1/8
1/2
4
R60-71104
5/8
2-1/8
5/8
5
R60-71105
3/4
2-1/8
3/4
5
L1
D2
L2
4 Flute Compression
End Point: Endmill
Helix Angle: 30°
Part #
D1
R60-51701
1/2
1
1/2
3
R60-51702
1/2
1-1/8
1/2
3
R60-51703
1/2
1-3/8
1/2
3-1/2
R60-51704
1/2
1-5/8
1/2
4
R60-51705
5/8
2-1/4
5/8
5
R60-51706
3/4
1-7/8
3/4
4
R60-51707
3/4
2-1/2
3/4
5
4 Flute Combination Compression
End Point: Endmill
Helix Angle: 30°
Part #
D1
L1
D2
L2
R60-61801
1/2
1
1/2
3
R60-61802
1/2
1-1/8
1/2
3
R60-61803
1/2
1-3/8
1/2
3-1/2
R60-61804
1/2
1-5/8
1/2
4
R60-61805
5/8
2-1/4
5/8
5
R60-61806
3/4
1-7/8
3/4
4
R60-61807
3/4
2-1/2
3/4
5
End Point: Endmill - Helix Angle: 30°
Shank Tolerance: H6
Part #
D1
L1
D2
L2
R60-52201
1/2
7/8
1/2
3
R60-52202
1/2
1-3/8
1/2
3-1/2
25
Flush Trim Laminate Trimmer
Part #
D1
L1
D2
L2
LR94000
LR94002
1/4
1/4
1/4
3/8
1/4
1/4
1-1/2
1-1/2
7° Bevel Laminate Trimmer
(Plastic Laminates)
(Plastic Laminates)
Part #
D1
L1
D2
L2
LR94004
1/4
1/4
1/4
1-1/2
Diamond Burr Fiberglass Finishers
Part #
BURR
End Point: Drill
(Hard Plastics)
D1
L1
D2
L2
R67-02601B
1/4
R67-02603A
1/4
R67-02604B
1/4
R67-12605B
3/8
R67-12607A
3/8
R67-12608B
1/2
R67-12610A
1/2
B = Burr Style, A = Arimid Style
3/4
3/4
1
7/8
7/8
1
1
1/4
1/4
1/4
3/8
3/8
1/2
1/2
2-1/2
2-1/2
3
2-1/2
2-1/2
3
3
2 Flute Diamond Burr Fiberglass Finishers
End Point: Drill
(Hard Plastics)
Part #
D1
L1
D2
L2
R67-02602
R67-12606
R67-12609
1/4
3/8
1/2
3/4
7/8
1
1/4
3/8
1/2
2-1/2
2-1/2
3
4 Flute Upcut Fiberglass Router
End Point: Endmill
Helix Angle: 30°
Part #
D1
L1
D2
L2
R55-31351
R55-31352
R55-31353
R55-31354
3/8
3/8
1/2
1/2
5/8
1-1/8
5/8
1-1/8
3/8
3/8
1/2
1/2
3
3
3-1/2
3-1/2
4 Flute Downcut Fiberglass Router
End Point: Endmill
Helix Angle: 30°
Part #
D1
L1
D2
L2
R54-31151
R54-31152
R54-31153
R54-31154
3/8
3/8
1/2
1/2
5/8
1-1/8
5/8
1-1/8
3/8
3/8
1/2
1/2
3
3
3-1/2
3-1/2
Spiral Dovetail Bits
Part # RH
Shank Tolerance: H6
26
Part # LH
D1
L1
D2
L2
R90-90100
R90-90100L
14mm
9mm (.354") 14mm+Flat
60mm
R90-90110D
R90-90110DL
14mm
10mm (.394") 14mm+Flat
60mm
R90-90110U
R90-90110UL
14mm
10mm (.394") 14mm+Flat
60mm
®
For use on OMEC dovetail machines, designed for smooth and quiet cutting. Made
with either upcut shear for easy chip evacuation or with downcut for fur free edge finish.
PCD-Drill bits for blind holes
Part # RH
Part # LH
D
L
S
D100.050R.PCD
D100.060R.PCD
D100.080R.PCD
D120.050R.PCD
D120.080R.PCD
D100.050L.PCD
D100.060L.PCD
D100.080L.PCD
D120.050L.PCD
D120.080L.PCD
5mm
6mm
8mm
5mm
6mm
57mm
57mm
57mm
70mm
70mm
10x27
10x27
10x27
10x30
10x30
Technical Details:
PCD drill bit for drilling blind holes.
Applications:
For drilling holes in laminated particle board, MDF, HDF as well as solid
surface materials.
PCD-Through hole drill bits
Single Flute
Part # RH
Part # LH
D
L
S
D145S.050R.PCD
D150S.050R.PCD
N/A
D145S.050L.PCD
D150S.050L.PCD
D150S.080L.PCD
5mm
5mm
8mm
57mm
70mm
70mm
10x27
10x27
10x27
Part # RH
Part # LH
D
L
S
D150.060R.PCD
D150.080R.PCD
D150.060L.PCD
D150.080L.PCD
6mm
8mm
70mm
70mm
10x27
10x27
Double Flute
Technical Details:
PCD drill bit for drilling clean through holes.
Applications:
For drilling holes in laminated particle board, MDF and HDF. Excellent for drilling
through solid surface materials.
PCD Hinge hole bits
Part # RH
Part # LH
D
L
S
D180.250R.PCD
D180.260R.PCD
D180.300R.PCD
D180.350R.PCD
D185.250R.PCD
D185.260R.PCD
D185.300R.PCD
D185.350R.PCD
D180.250L.PCD
D180.260L.PCD
D180.300L.PCD
D180.350L.PCD
D185.250L.PCD
D185.260L.PCD
D185.300L.PCD
D185.350L.PCD
25mm
26mm
30mm
35mm
25mm
26mm
30mm
35mm
57mm
57mm
57mm
57mm
70mm
70mm
70mm
70mm
10x26
10x26
10x26
10x26
10x26
10x26
10x26
10x26
Technical Details:
PCD-Hinge bit with 2 spurs + 2 flat bottom cutters.
Applications:
For drilling hinge holes in a variety of materials such as laminated
particle board , MDF, HDF as well as solid surface materials.
D - Cutting Diameter • L - Overall Length • S - Shank Diameter x Length
27
ECODIA - Economical Diamond Router Bits
Part #
D
d
CL
TL
Z
ECODIA-00
3/8
3/8
7/8
2-3/4
1+1
ECODIA-01.S
1/2
1/2
1
2-3/4
1+1
ECODIA-01
1/2
1/2
1-1/8
2-3/4
1+1
ECODIA-01L
1/2
1/2
1-1/8
2-3/4
1+1
ECODIA-02
1/2
1/2
1-3/8
3-3/4
1+1
ECODIA-02L
1/2
1/2
1-3/8
3-3/4
1+1
ECODIA-03
5/8
1/2
1-1/8
3-5/8
1+1
ECODIA-04
5/8
3/4
1-3/8
4
1+1
ECODIA-04L
5/8
3/4
1-3/8
4
1+1
ECODIA-05
3/4
3/4
1-1/8
3-5/8
1+1
ECODIA-05L
3/4
3/4
1-1/8
3-5/8
1+1
ECODIA-06
3/4
3/4
1-3/8
4
1+1
ECODIA-06L
3/4
3/4
1-3/8
4
1+1
ECODIA-07
3/4
3/4
1-3/4
4-1/4
1+1
ECODIA-07L
3/4
3/4
1-3/4
4-1/4
1+1
L = Left Hand Rotation
Technical Details:
1 + 1 wing with carbide plunge point.
Special PCD grade for superior life in particle board.
Applications:
Jointing, grooving, rebating on a variety of panel materials such as melamine and
veneer laminated particle board, MDF and HDF.
Recommended Feed Rate: 5-10 m/min. (15-30 F/Min.)
ECO-SPARK - Diamond Router Bits
Part #
D
d
CL
TL
Z
ECO-SPARK-01
1/2
1/2
1
2-3/4
2+2
ECO-SPARK-03
5/8
5/8
1
3-3/4
2+2
ECO-SPARK-04
5/8
5/8
1-3/8
4
2+2
ECO-SPARK-05
3/4
3/4
1
3-1/2
2+2
ECO-SPARK-06
3/4
3/4
1-3/8
4
2+2
ECO-SPARK-07
3/4
3/4
1-3/4
4-3/4
2+2
Technical Details:
2 + 2 wing with plunge point.
Special PCD grade for superior life in particle board.
Applications:
veneer laminated particle board, MDF and HDF.
D - Cutting Diameter • d - Shank Diameter • CL - Cutting Edge Length • TL - Total Length
Z - # of Wings
28
High Feed Diamond Router Bits
Part #
D
d
B
TL
Z
DIA-HI-FEED-06
3/4
3/4
1-3/8
2-3/4
3
DIA-HI-FEED-09
1
5/8
1
3-3/4
3
Technical Details:
3 wing helical design with up/down shear
Applications:
veneer laminated particle board, MDF, HDF and Plywood.
Specialized Diamond Router Bits - Nesting Based Routing
Part #
D
d
B
TL
Z
DIA-HI-FEED-01
1/2
1/2
1
2-3/4
3
Technical Details:
3 wing helical design with up/down shear
Applications:
Grooving, rebating and severing parts in plywood, MDF, HDF on nested based routers.
Recommended Feed Rate: 15-30 m/min. (45-90 F/Min)
NEW Tool Bodies made from special Tungsten alloy to prevent breakage.
Straight Flute Diamond Router Bits
Part #
D
d
B
TL
Z
NEW DIA-RTR-1615
1/4
1/4
3/4
2-1/2
2
NEW DIA-RTR-1616
3/8
3/8
7/8
3
2
DIA-RTR-1617
1/2
1/2
5/8
2-1/4
2
DIA-RTR-1618
3/4
3/4
3/4
3-1/2
2
3/4
3/4
3/4
3-1/2
2
(Down Shear)
NEW DIA-RTR-1618S
Technical Details:
2 solid wings with plunge point
Applications:
Grooving, rebating and sizing of solid wood and MDF panels without the possibility of
leaving lines.
Recommended Feed Rate: 10-15 m/min (30-50 F/min) depending on application.
D - Cutting Diameter • d - Shank Diameter • B - Cutting Edge Length • TL - Total Length
Z - # of Wings
29
Diamond Hi-Shear Router Bits
Part #
D
d
B
TL
Z
DIA-RTR-HS16
16mm
1/2
24mm
3
2+2
DIA-RTR-HS19
19mm
3/4
18mm
3
2+2
Technical Details:
2+2 wings with extreme up/down shear.
Applications:
Especially designed to eliminate chipping on paper laminated panels.
Recommended Feed Rate: 10-20 m/min (30-60 F/min)
Diamond Hogging Router Bits
extreme material removal at high feed rates
Part #
D
d
B
TL
Z
DIA-HI-FEED 06RO
3/4
3/4
1-3/8
3-5/8
3
DIA-HI-FEED 08RO
3/4
3/4
2-1/8
4-1/4
3
Technical Details:
3 wing up-shear with chip breaker design to reduce resistance when removing large
chip loads.
Applications:
Deep pocketing & 1st pass applications where premium cut quality is not required
For use in solid wood and wood composites.
Recommended Feed Rate:
10-40 m/min. (30-120 F/min) depending on RPM, material and depth of cut.
Diamond Fibreglass Tool
Part #
D
d
B
TL
Z
DIA-RTR-5026
1/2
1/2
1-3/8
3-3/4
1+1+1
Technical Details:
3 wing staggered tooth with boring point.
Teeth have ground in overlapping chip breakers to prevent tear-out.
Application:
For use on CNC machines designed to drill and trim fibreglass and
composite materials.
Recommended feed rate:
4-6 m/min (12-18 F/min.) @10,000 RPM.
Z - # of Wings
30
Diamond Pocketing/Surfacing Router Bits
premium surface finish at high feed rates
Part #
D
d
B
TL
Z
DIA-RTR 2008
1-3/4
3/4
1/2
2-1/2
3+1
DIA-RTR 4002
2
3/4
5/8
2-5/8
3+1
Technical Details:
3 wing with plunge.
Applications:
Shallow pocketing or surfacing where premium cut quality and bottom finish are
required. For use on MDF, HDF, Solid Wood and Plastics.
Recommended Feed Rate: 20-40 m/min. (60-120 F/min.) @ 14,000 RPM.
Diamond Pocketing/Surfacing Router Bits
Part #
D
d
B
TL
Z
DIA-RTR-2009
1-3/4
3/4
1/2
2-1/2
3
DIA-RTR-4003
2
3/4
5/8
2-5/8
3
Technical Details:
3 wing without plunge.
Applications:
Shallow pocketing or surfacing where premium cut quality and bottom finish are
required. For use on MDF, Solid Woods and Plastics.
Recommended Feed Rate: 20-40 m/min. (60-120 F/min.) @ 14,000 RPM.
Diamond T-Slot Router Bits
Part #
D
d
B
TL
Z
DIA-RTR 1447
1-3/8
1/2
1/4
2-1/2
2+1
DIA-RTR 1447L
1-3/8
1/2
1/4
2-1/2
2+1
Technical Details:
2+1 wing.
Applications:
For T-slotting slot/slat wall systems.
Available in many others sizes on request.
Z - # of Wings
31
Diamond V-Grooving Router Bits
Part #
D
d
B
TL
Z
DIA-RTR 26A
1
3/4
1/2
2-3/4
1
Technical Details:
1 wing cutting 90° V-groove.
Applications:
For accurate V-grooving in MDF and solid woods.
Diamond Dovetail Router Bits
Part #
D
d
B
TL
Z
Angle
DIA-RTR.DT10
.618
1/2
.344
2-3/4
2
7º
DIA-RTR.DT11
.460
1/2
.580
2-1/2
2
9.5º
Technical Details:
2 wing dovetail router bit.
Applications:
For accurate dovetails in plywood and solid woods.
Diamond Dovetail Router Bits for Dodds machines
Part #
D
d
B
L
Z
Angle
DIA-RTR.DTD.312R/L
DIA-RTR.DTD.375R/L
.549
.549
5/16
5/16
.312
.375
1.187
1.250
2
2
11°
9°
Technical Details:
2 wing dovetail router bit for Dodds dovetailing machines.
Available in right hand or left hand rotation.
Applications:
For accurate dovetails in MDF and solid woods.
Diamond Dovetail Router Bits for Mereen-Johnson Dovetailers
Part #
D
d
B
L
Z
DIA-RTR-DTD.4212R/L
.563
5/8
.421
2.106
2
DIA-RTR-DTD.4213R/L
.563
5/8
.421
2.106
3
Technical Details:
2 and 3 wing dovetail bits for Mereen-Johnson Dovetailers.
Available in right hand and left hand rotation.
Applications:
For accurate dovetails in MDF and solid woods.
D - Cutting Diameter • D - Shank Diameter • B - Cutting Edge Length • TL - Total Length
Z - # of Wings
32
DIA-RTR.16C
Profile Router Bits
DIA-RTR.16D
DIA-RTR.16E
Precision PCD - DIAMOND for MDF Cabinet door production
Part #
DIA-RTR.16C
DIA-RTR.16D
DIA-RTR.16E
DIA-RTR.16F
DIA-RTR.26A
DIA-RTR.26B
DIA-RTR.26C
DIA-RTR.26D
DIA-RTR.26E
DIA-RTR.40A
DIA-RTR.40B
DIA-RTR.40C
DIA-RTR.40D
DIA-RTR.40E
DIA-RTR.50A
DIA-RTR.50B
DIA-RTR.50C
D
1.260
1.248
1.988
0.750
1.024
0.472
0.984
0.748
0.984
1.654
1.496
1.260
1.496
0.945
1.969
1.969
1.969
d
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
TL
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
Z
2
2
2
2
1
1
1
1
1
2
2
2
2
2
2
2
2
DIA-RTR.16F
33
DIA-RTR.26A
DIA-RTR.26D
DIA-RTR.26B
DIA-RTR.26E
DIA-RTR.26C
Other profiles made specifically to your specifications.
Call our sales department for a quotation (800) 959-5641
34
DIA-RTR.40A
DIA-RTR.40D
DIA-RTR.40B
DIA-RTR.40E
DIA-RTR.40C
Technical Details:
Precision PCD diamond tipped router bits.
Applications:
MDF Door production
With a combination of these PCD-Diamond tools you will be able to
manufacture a variety of door profiles.
Also available in Insert (see page 42).
35
DIA-RTR.50A
DIA-RTR.50B
DIA-RTR.50C
36
Custom designed Diamond Tools for CNC
Take advantage of Royce//Ayr’s expertise in custom tool design. Provide us with a wood sample, drawing or DXF file
and trust our experienced staff to custom design a tool for any routing application.
Examples:
37
CNC Insert Tooling
Straight Insert Cutter (Single Flute)
Part #
D
d
B
Z
566.012.030
1/2
1/2
30mm
1
566.016.030
5/8
1/2
30mm
1
566.016.050
5/8
5/8
50mm
1
566.019.030
3/4
3/4
30mm
1
566.019.050
3/4
3/4
50mm
1
Technical Details:
Straight cutter with reversible insert with bevelled bottom for ramping.
Applications:
For contouring of veneered and laminated panels.
Replacement Parts:
Knife for 012.030
Knife for 016.030
Knife for 016.050
Knife for 019.030
Knife for 019.050
Screws for 012.030
Screws for all others
#595-3090R
#595-3012R
#595-5012R
#595-3012R
#595-5012R
#580.RH-M3506.6
#580.RH-M3505.9
Hogging Router Cutter
Part #
D
d
L
Z
567.019.048
3/4
567.019.062
3/4
3/4
1-7/8
1+1
3/4
2-7/16
1+1
Technical Details:
Straight insert cutter with specially designed inserts for heavy cutting at
high feed rates.
Applications:
For severing, copying and sizing of solid wood and wood composites. Minimum
cutting load with high removal rate. Reduced risk of breaking under stress.
Replacement Parts:
5mm cutting pins, straight
5mm cutting pins, down-cut
5mm cutting pins, up-cut
Plunge cutting knife
#595C-10050-0
#595C-10050-1
#595C-10050-2
#595C-19050-R
Examples of application:
Jointing
Contour cutting
Copying
38
Rebating
Severing
Cut-out works
Ramp
plunge
pro cutting
Straight Insert Cutter (Double Flute) Ramp Type
Part #
D
d
B
Z
568.019.030
3/4
3/4
30mm
2
568.019.050
3/4
3/4
50mm
2
568.025.030
1
3/4
30mm
2
568.025.050
1
3/4
50mm
2
Technical Details:
Straight cutter with reversible inserts for ramping. Carbide tipped center point.
Applications:
For contouring of veneered and laminated panels.
Replacement Parts:
Knives for B=30mm #595-3012R
Knives for B=50mm #595-5012R
Screws
#580.RH-M3505.9
Straight Insert Cutter Plunge Type
Part #
D
d
B
Z
569.016.030
5/8
1/2
30mm
1+1
569.019.030
3/4
3/4
30mm
1+1
569.019.050
3/4
3/4
50mm
1+1+1
569.025.030
1
3/4
30mm
1+1
569.025.050
1
3/4
50mm
1+1+1
Technical Details:
Straight cutter with reversible inserts and carbide plunging insert.
Applications:
For slotting, grooving and contouring of veneered and laminated panels.
Replacement Parts:
Straight Knives
Plunge knife for 5/8" & 3/4"
Plunge knife for 1"
Knives for B=50mm
Knife screws
Plunge screw
#595-3012R
#590-0075
#590-0090
#595-3012R x 2
#580.RH-M3506.6
#580.RH-M3505.9
39
Multi-Profiler Router Cutter
Part #
D
d
B
Z
560.080.040
80mm
3/4
40mm
2
560.080.060
80mm
3/4
60mm
2
Technical Details:
Multi-Profile router bit with steel backer and solid carbide inserts. Profiles have to fit
within the shaded area. Knives and backer plates to be ordered separately.
Applications:
For machining a wide variety of edge profiles on solid wood or wood composites.
Replacement Parts:
Gibs
(2) # 581-17630.40
Screws (4) # 580SS.DH-M8020
Rebate Router Cutter
Part #
D
d
B
Z
561.050.030
50mm
3/4
30mm
2
561.050.050
50mm
3/4
50mm
2
Technical Details:
Reversible 2 sided knives and 4 sided spurs.
Applications:
For jointing & rebating solid woods and composites.
Replacement Parts:
Knives
Spurs
Screws
Countersunk Screws
(2)
(2)
(4)
(2)
#
#
#
#
590-0500
592-1414
580.RH-M3505.9
580.CST-M4067.TX
Adjustable Bevelling Router Cutter
Part #
D
d
B
Z
561A.080.040
85mm
1
40mm
2
Technical Details:
Bevel cutter with the possibility to adjust to 90° on bottom and 45° on top.
Infinitely adjustable.
Applications:
For machining a wide variety of bevels on solid wood or wood composites.
Replacement Parts:
Knives (2) # 591-4012 (4 sided)
40
V-Groove Router Cutters
Part #
D
d
B
A
563.V23.027
13/16
1/2
1
22.5
563.V25.027
7/8
1/2
31/32
25
563.V30.027
1
1/2
15/16
30
563.V35.027
1-1/4
1/2
7/8
35
563.V50.028
1-5/8
1/2
11/16
50
563.V55.028
1-3/4
1/2
5/8
55
Replacement screws for above: 580.RH-M3548
563.V45.030
1-5/8
1/2
13/16
45
563.V60.030
2-1/8
1/2
9/16
60
563.V65.030
2-1/8
1/2
1/2
65
563.V75.030
2-1/4
1/2
5/16
75
563.V80.030
2-5/16
1/2
3/16
80
Replacement screws for above: 580.RH-M3505.9
563.V30.050
2
1/2
1-5/8
30
563.V45.050
2-3/4
3/4
1-11/32
45
563.V60.050 3-13/32
3/4
63/64
60
563.V65.050
3-9/16
3/4
13/16
65
563.V75.050 3-25/32
3/4
1/2
75
563.V23.060
1-3/4
1/2
1-5/8
22.5
Replacement screws for above: 580.RH-M3505.9
Z
REPL. KNIFE #
1
1
1
1
1
1
595VG-2709R
595VG-2709R
595VG-2709R
595VG-2709R
595VG-2812R
595VG-2812R
1
1
2
2
2
595V-3012R
595V-3012R
595V-3012R
595V-3012R
595V-3012R
1
1
2
2
2
1
595V-5012R-30
595V-5012R
595V-5012R
595V-5012R
595V-5012R
595V-6012R-23
Technical Details: Single and Double wing with reversible inserts @ various angles.
Applications: For beveling, v-folding and carving of solid woods & wood composites.
Straight Face for MDF
Part #
D
d
B
Z
563S.050.14-502
563S.100.14-753
2
4
1/2
3/4
14mm
14mm
2
3
Up-Shear for Balsa Core Materials
Part #
D
d
B
Z
563S.065.14-502S
563S.100.14-753S
2-1/2
4
1/2
3/4
14mm
14mm
2
3
Technical Details: 14mm x 4 sided insert knives
Replacement Parts: Knives
Knives
Screws
# 592-1414
# 592-1414.R
# 580.CST-M4067.TX
41
Lock Mitre Router Cutters 22.5°
Part #
D
d
B
Z
564LM.050-023M
52mm
3/4
35mm
2
564LM.050-023F
52mm
3/4
35mm
2
Technical Details:
1 set of opposing profiles to make a 45° mitre joint
Applications:
For machining particle board, MDF, solid wood or solid surface material. Designed to
machine thicknesses from 1/2" to 3/4".
Replacement Parts:
Knives for 050-023M # 158-564LM-050-023M
Knives for 050-023F # 158-564LM-050-023F
Screws
# 580.RH-M3505.9
Lock Mitre Router Cutters 45°
Part #
D
d
B
Z
564LM.060-045M
61mm
3/4
33mm
2
564LM.060-045F
61mm
3/4
33mm
2
Technical Details:
1 set of opposing profiles to make a 90° mitre joint.
Applications:
For machining particle board, MDF, solid wood or solid surface material. Designed to
machine thicknesses from 1/2" to 3/4".
Replacement Parts:
Knives for 050-045M # 158-564LM-060-045M
Knives for 050-045F # 158-564LM-060-045F
Screws
# 580.RH-M3505.9
42
Insert Router Bits for MDF Doors
Insert Router Bits for finishing a
complete Panel raised MDF Cabinet door.
Part #
562R1.026-1W
562SC.026-1W
564IP.040-2W
564OP.016-2W
564RP.050-2W
D
d
Z
1.024
1.024
1.575
1.373
1.969
3/4
3/4
3/4
3/4
3/4
1
1
2
2
2
Replacement knives for 562R1.026:
(Radius tool)
158-562R1.026-1W-A
158-562R1.026-1W-B
158-562R1.026-1W-C
158-562R1.026-1W-D
Replacement knives for 562SC.026:
(Square corner tool)
158-562SC.026-1W-A
158-562SC.026-1W-B
158-562SC.026-1W-C
158-562SC.026-1W-D
158-562SC.026-1W-E
Replacement knives for 564IP.040:
(Inside profile)
158-564IP.040-2W-A
158-564IP.040-2W-B
158-564IP.040-2W-C
158-564IP.040-2W-D
43
Replacement knives for 564OP.016:
(Outside profile)
158-564OP.016-2W-A
158-564OP.016-2W-B
158-564OP.016-2W-C
158-564OP.016-2W-D
Replacement knives for 564RP.050:
(Outside or Raised panel profile)
158-564RP.050-2W-A
158-564RP.050-2W-B
158-564RP.050-2W-C
158-564RP.050-2W-D
44
Sample Profiles
1.772"
45mm
C
A
.394"
10mm
AC
1.772"
45mm
B
A
.394"
10mm
AB
1.417"
36mm
B
B
.394"
10mm
BB
Various profiles available,
as shown, to give you the
flexibility to produce a
variety of door profiles.
Each cutter is supplied
with profiled knives installed;
additional knives
or other profiles may be
ordered separately.
45º
1.417"
36mm
.118º
3mm
C
B
BC
A
R .079º
2mm
1.496"
38mm
B
D
B
.394"
10mm
R .250º
6.35mm
.394"
10mm
DB
R .080º
2.03mm 1 x 21
Technical Details:
Precision router cutters with
replaceable knives.
Applications:
For manufacturing MDF cabinet doors
on CNC routers.
Replacement Parts:
For knives see previous page
Screws # 580.RH-M3505.9
1.968"
50mm
C
RP-C
B
.394"
10mm
D
.394"
10mm
R .315º
8mm
D
1.968"
50mm
.079º
2mm
RP-A
R .315º
8mm
E
1.772"
45mm
.187º
4.75mm
RP-B
C
.394"
10mm
F
45
TOOL HOLDERS FOR CNC MOULDERS
Part #
D
L
PRC-HSK80W-30060
PRC-HSK80W-40040
PRC-HSK80W-40060
PRC-HSK80W-40080
PRC-HSK80W-40130
PRC-HSK80W-40240
30mm
40mm
40mm
40mm
40mm
40mm
60mm
40mm
60mm
80mm
130mm
240mm
Technical Details:
Standard HSK80W Tool holders for "WEINIG PowerLock-System".
Applications:
Used to run a variety of tooling on CNC moulders.
HYDRAULIC TOOL HOLDERS FOR CNC MOULDERS
Part #
D
L
PRC-ETP.GEW-40550
PRC-ETP.GEW-40100
PRC-ETP.GEW-40170
PRC-ETP.GEW-50210
40mm
40mm
40mm
50mm
55mm
100mm
170mm
210mm
Technical Details:
ETP® Hydro-Grip Tool holders for "WEINIG PowerLock-System".
Applications:
Used to run a variety of tooling on CNC moulders with Hydro-Lock for
additional precision.
TOOL HOLDER ARBOR FOR CNC ROUTERS ETC. - HSK 63F
Part #
PRC-HSK63F-10055
PRC-HSK63F-10080
PRC-HSK63F-100100
PRC-HSK63F-12555
PRC-HSK63F-12580
PRC-HSK63F-125100
PRC-HSK63F-12555-42
PRC-HSK63F-12580-42
PRC-HSK63F-125100-42
Other sizes available on request
46
D
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
L
55mm
80mm
100mm
55mm
80mm
100mm
55mm
80mm
100mm
A
33mm
33mm
33mm
33mm
33mm
33mm
42mm
42mm
42mm
Technical Details:
High precision tool holders balanced as a unit or in combination with mounted tooling.
Applications:
For mounting a variety of tooling on CNC Routers and other CNC Equipment where
tool holders are required.
TOOL HOLDER ARBOR FOR CNC ROUTERS ETC. - ISO 30
Part #
PRC-IS030-10040
PRC-IS030-10055
PRC-IS030-10080
PRC-IS030-100100
PRC-IS030-12540
PRC-IS030-12555
PRC-IS030-12580
PRC-IS030-125100
D
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
L
40mm
55mm
80mm
100mm
40mm
55mm
80mm
100mm
A
35mm
35mm
35mm
35mm
35mm
35mm
35mm
35mm
Technical Details:
High precision tool holders balanced as a unit or in combination with mounted tooling.
Applications:
tool holders are required.
NOTE: Complete with nut. Pull stud and collet not included.
HYDROGRIP
G2 G3
Extremely user friendly.
Quick and easy tool changes.
No grease pump needed.
Perfectly centered and balanced tools.
HYDRAULIC TOOL HOLDERS (for shank tools)
Part #
PRC-ETP.G2-1/2-HSK63F
D1
1/2
5/8
3/4
L3
87mm (3.425")
87mm (3.425")
87mm (3.425")
1/2
5/8
3/4
68mm (2.677")
68mm (2.677")
68mm (2.677")
47
HYDRAULIC TOOL HOLDERS (for tools with bore)
Part #
PRC-ETP.HSK63F-07540
D
3/4
3/4
1
1
1
1-1/4
1-1/4
1-1/4
L
40mm
55mm
40mm
55mm
80mm
40mm
55mm
80mm
Technical Details:
High precision tool holders balanced as a unit or in combination with mounted tooling. Hydraulic
precision arbors provide perfect balance and centricity for the tool. Arbor is equipped with
standard safety ring but can also be used without, by using the safety screws supplied.
Applications:
For mounting a variety of tooling on CNC Routers and other CNC Equipment where tool holders
are required.
TOOL HOLDERS FOR CNC Routers - HSK 63F
Part #
PRC-HSK63F-16
PRC-HSK63F-16L
PRC-HSK63F-20
PRC-HSK63F-20L
PRC-HSK63F-38
PRC-HSK63F-TH
(ER32)
(ER32)
(ER40)
(ER40)
(ORT25)
(ER32)*
D
A
50mm
50mm
63mm
63mm
60mm
57.5mm
70mm
70mm
76mm
76mm
80mm
63mm
*For Thermwood
Technical Details:
Standard HSK63F Tool holders for CNC Routers and shapers.
Applications:
To hold a variety of routing tools with mechanical collets.
See page 50 for listing of collets.
TOOL HOLDERS FOR CNC Routers - ISO 30
For Biesse (after 09/09/92) & Masterwood with H.S.D. spindle
Part #
PRC-225-50.R
PRC-225-50.L
PRC-225-63.R
PRC-225-63.L
(Biesse)
(Biesse)
(Biesse)
(Biesse)
ER32
ER32
ER40
ER40
D
A
50mm
50mm
63mm
63mm
50mm
50mm
50mm
50mm
Technical Details:
Standard ISO 30 Tool holders for CNC Routers and Point to Point machines.
Applications:
48
For Alberti, Vitap & Masterwood with Colombo spindle
Part #
PRC-225-50.R
PRC-225-50.L
PRC-225-63.R
PRC-225-63.L
(Alberti)
(Alberti)
(Alberti)
(Alberti)
ER32
ER32
ER40
ER40
D
A
50mm
50mm
63mm
63mm
60mm
60mm
60mm
60mm
For Biesse, Masterwood
Part #
PRC-225-50.R
PRC-225-50.L
PRC-225-63.R
PRC-225-63.L
(Biesse)
(Biesse)
(Biesse)
(Biesse)
ER32
ER32
ER40
ER40
D
A
50mm
50mm
63mm
63mm
50mm
50mm
50mm
50mm
For Busellato, Weeke, Ima, Bulleri, Maka, & Cosmec
Part #
PRC-225-50.R
PRC-225-50.L
PRC-225-63.R
PRC-225-63.L
(Busellato)
(Busellato)
(Busellato)
(Busellato)
ER32
ER32
ER40
ER40
D
A
50mm
50mm
63mm
63mm
60mm
60mm
60mm
60mm
For Thermwood
Part #
D
A
PRC-225-50.R (Thermwood) ER32
50mm
63mm
Part #
D
A
PRC-CMS.ER32
PRC-CMS.ER40
50mm
63mm
50mm
57mm
For CMS
Technical Details:
Standard ISO 30 Tool holders for CNC Routers.
Applications:
49
For Morbidelli & SCM
Part #
PRC-250.R
PRC-250.L
PRC-250.R
PRC-250.L
(ER32)
(ER32)
(ER40)
(ER40)
D
A
50mm
50mm
60mm
60mm
55mm
55mm
72mm
72mm
Technical Details:
Standard ISO 30 Tool holders for CNC Routers.
Applications:
Special CMS Holders
Part #
D
PRC-CMS-SPEC.ER32
PRC-CMS-SPEC.ER40
50mm
63mm
 For “ball bearing nuts” add BB to the end of part number.
NOTE: Pull stud not included.
BT Holders
Part #
D
A
PRC-200-BT30.ER32.BB
50mm
63mm
50mm
50mm
50mm
63mm
60mm
70mm
65mm
65mm
65mm
70mm
 AII BT holders are shipped complete with “ball bearing nuts”.
NOTE: Pull stud not included.
50
COLLETS - ER Collets
Part # ER32
Part# ER40
Size
PRC-350.03
PRC-350.04
PRC-350.05
PRC-350.6.35
PRC-350.08
PRC-350.09.5
PRC-350.12
PRC-350.12.7
PRC-350.14
PRC-350.15
PRC-350.16
PRC-350.19.05
PRC-350.19/20
PRC-350.22/23
PRC-375.03
PRC-375.04
PRC-375.05
PRC-375.6.35
PRC-375.08
PRC-375.10
PRC-375.12
PRC-375.12.7
PRC-375.14
PRC-375.15
PRC-375.16
PRC-375.19.05
PRC-375.19/20
PRC-375.22/23
PRC-375.25.4
1/8
3/16
7/32
1/4
5/16
3/8
7/16
1/2
17/32
9/16
5/8
3/4
25/32
7/8
1
COLLETS - PERSKE SYOZ
Part # SYOZ 25
PRC-400.03
PRC-400.04
PRC-400.06
PRC-400.10
PRC-400.12
PRC-400.13
PRC-400.15
PRC-400.16
PRC-400.19
PRC-400.22/23
PRC-400.25
Size
1/8
3/16
1/4
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
For complete selection of collets, pull studs and router
accessories visit
www.royceayr.com
51
SHRINK FIT TOOL HOLDER - HSK 63F
Part #
PRC-SHRINK-HSK.1/4
PRC-SHRINK-HSK.3/8
PRC-SHRINK-HSK.1/2
PRC-SHRINK-HSK.3/4
PRC-SHRINK-HSK.1
D1
L1
1/4
3/8
1/2
3/4
1
80mm
95mm
95mm
100mm
115mm
SHRINK FIT TOOL HOLDER - ISO 30
Part #
PRC-SHRINK-ISO.1/4
PRC-SHRINK-ISO.3/8
PRC-SHRINK-ISO.1/2
PRC-SHRINK-ISO.5/8
PRC-SHRINK-ISO.3/4
D1
L1
1/4
3/8
1/2
5/8
3/4
80mm
80mm
80mm
80mm
80mm
Technical Details:
High precision tool holders balanced 24,000 RPM at G2.5.
Maximum T.I.R. only .0001".
Applications:
extra precision tool holders are required.
Tool Holder
Clean-up Kit
for HSK63F
• Keep your tools
running longer
and faster.
• Extend the life of your
machine bearings.
• Save money by not
replacing your collets
and tool holders
as often.
52
Cone Wiper for HSK 63F Collet Wiper for ER32
Cleans the inside of the tool holder
Cleans the receiver
so your tool holder will
seat properly
Wire brush for collet
Keep the inside of your collet clean
All tools offered from stock are subject to availability. The buyer agrees to partial
deliveries which will be considered separate transactions. Cancellation or alteration of
orders are subject to our written consent. Returns will only be accepted upon written
prior approval and the assignment of an authorized return number. Custom tools made
to special order are not returnable.
Delivery lead time is based on production scheduling and material availability, and
starts from date of order confirmation. Every effort will be made to fulfill delivery
commitments. Any delay, for any reason, will not be liability for any loss or damage.
GUARANTEE
All our tools are manufactured according to specifications described in this catalogue.
Tools suspected to be defective and returned for inspection are to be shipped prepaid.
We will only replace tools which prove, upon our examination, to have material and/or
manufacturing defects. Tools that have been misused or carelessly handled are not
guaranteed. We do not accept any responsibility or liability for mistakes caused by
improper application, handling, or inappropriate sharpening. We reserve the right to
change specifications from those published in this catalogue as part of our continual
product improvement process.

royce cnc

Transcription

Similar documents

Visual FoxPro - Sea Ray Boats

Lyndex Advan. Catalog

ER/TG Collet Catalog

Techniks CNC Router Tooling

CNC Router Tooling and Accessories