Untitled - Customs

Transcription

Untitled - Customs

12
705
SECTION
12
WINDSHIELDS
0601-1014
TOURING
LUGGAGE
DS-300333
SEATS &
SISSY BARS
EXHAUST
DS-300339
DS-300335
FUEL/AIR
SYSTEMS
DS-300338
DS-300334
DS-300337
ENGINE
DS-300336
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
1803-1510
ELECTRICAL
0601-1016
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
706
11/4” BUFFALO BARS
•The ultimate 11/4” diameter
handlebar, designed for
maximum comfort
•Drilled for internal wires;
work with standard controls
•Available with a show
chrome or gloss black finish
•Springer-style bars have
43/4” center knurling for
a smooth finished look; work with the OEM Springer risers and
handlebar clamps
•11/4” thick risers are also available to complete the Buffalo look; accept
1” diameter handlebars only
•Handlebar clamps cover all of the center area that is sized down to one
inch, all bars are knurled
•Gauge mounts for T-Bars sold separately, see DASHES & GAUGES section
•See pages 730-737 for handlebar clamps and risers
•Made in the U.S.A.
NOTE: Not for models with electronic throttle control.
NOTE: Not for use with stock risers and handlebar/gauge mount on
883C/1200C models.
NOTE: OEM-style handlebar clamps are not designed for use with
these handlebars.
PART #
DESCRIPTION
END RISE
CHROME 11/4” BUFFALO BARS
DS-300331
6” T-Bar
8.5”
DS-300332
8” T-Bar
9.75”
0601-1014
8” T-Bar (straight risers)
12.5”
DS-300333
10” T-Bar
12.0”
0601-1015
10” T-Bar (straight risers)
14.5”
DS-300334
Drag Bar
DS-300335
Drag Bar for Springer
DS-300336
Classic style
2.0”
DS-300337
Bagger style
4.5”
DS-300338
Bagger style for Road King/Road Glide 5.5”
1803-1510
Bagger II style for Road King/Road Glide 4.125”
DS-300339
Bagger style for Springer
5.5”
0601-1016
Bagger style Ape Hangers
13”
DS-300340
8.5” Ape Hangers
8.5”
DS-300341
9.5” Ape Hangers for Springer
9.5”
DS-300342
10” Ape Hangers
10.0”
DS-300343
12.5” Ape Hangers
12.5”
0601-1010
14” Ape Hangers
15”
WIDTH
CENTER WIDTH
PULLBACK
30.0”
30.0”
31”
30.0”
31”
31.0”
31.0”
36.5”
34.5”
32.5”
34.0”
34.5”
35.125”
37.5”
36”
39.0”
36.0”
39”
9.0”
9.0”
8.5”
9.0”
8.5”
8.5”
8.5”
10.5”
10.5”
10.5”
10.5”
12.0”
10”
11.5”
12.0”
11.5”
10.5”
10”
7.75”
8.25”
5.875”
8.5”
5.875”
6.0”
6.0”
8.5”
12.5”
16.0”
13.0”
12.0”
8”
10.0”
10.0”
10.0”
12.0”
11”
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$164.95
164.95
157.95
164.95
157.95
99.95
99.95
164.95
164.95
164.95
164.95
164.95
159.95
164.95
164.95
164.95
164.95
164.95
SECTION
11/4” BUFFALO BARS (CONT)
12
WINDSHIELDS
0601-1006
TOURING
0601-0304
LUGGAGE
DS-300345
0601-0305
SEATS &
SISSY BARS
0601-0744
0601-1008
EXHAUST
0601-1017
0601-1007
0601-1018
FUEL/AIR
SYSTEMS
0601-1023
ENGINE
PART #
DESCRIPTION
CHROME 11/4” BUFFALO BARS (CONT)
DS-300345
12.5” Ape Hangers for Springer
DS-300344
16” Ape Hangers
0601-1008
16” Ape Hangers for Springer
0601-0671
18” Ape Hangers
0601-1009
18” Ape Hangers for Springer
0601-0672
20” Ape Hangers
0601-0304
Road King style
0601-0305
Beach bars
0601-1006
Beach bars for Springer
0601-0744
Stick bar
0601-1007
Inverted Drag Bar
BLACK 11/4” BUFFALO BARS
0601-1017
Beach bars
0601-1018
6” T-Bar
0601-1019
8” T-Bar
0601-1020
12.5” Ape Hangers
0601-1021
14” Ape Hangers
0601-1022
16” Ape Hangers
0601-1023
18” Ape Hangers
END RISE
WIDTH
CENTER WIDTH
PULLBACK
12.5”
16.0”
17.5”
18”
19.5”
20”
5.75”
3”
3”
10”
38.5”
39.5”
40.5”
40”
40.5”
40”
34.5”
35.5”
39.5”
30”
31”
12.0”
11.5”
11”
12”
11”
12”
9.5”
9.5”
10.5”
8.5”
12.0”
10.0”
10.5”
8”
10.5”
8”
11.0”
15.0”
16.875”
13”
3”
8.5”
9.75”
12.5”
15”
16.0”
18”
35.5”
30.0”
30.0”
36.0”
39”
39.5”
40”
9.5”
9.0”
9.0”
10.5”
10”
11.5”
12”
15”
7.75”
8.25”
12.0”
11”
10.0”
8”
SUG. RETAIL
$164.95
164.95
176.95
179.95
176.95
179.95
164.95
164.95
164.95
74.95
164.95
152.95
155.95
155.95
164.95
164.95
164.95
164.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
Notched for Electronic
Throttle Control
TANKS &
OIL FILTERS
0601-0739
0601-0800
0601-0742
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
11/4” BUFFALO HANDLEBARS
•For 08-09 Touring models with electronic
throttle control
•Beautiful chromed handlebars
•Knurled, drilled and machined for internal wiring
•Accept stock H-D controls and handlebar clamp
PART #
DESCRIPTION
END RISE
FOR 08-09 FLHT/FLHX
0601-0739
10” Ape Hanger
10”
0601-0740
12” Ape Hanger
12”
0601-0741
14” Ape Hanger
14”
FOR 08-09 FLHR/FLTR
0601-0799
12.5” Ape Hanger
12.5”
0601-1011
14” Ape Hanger
15”
0601-0800
16” Ape Hanger
16”
0601-1012
18” Ape Hanger
18”
0601-0742
Bagger style
4.5”
0601-1013
Road Glide style
6”
FOOTRESTS
& LICENSE
PLATE FRAMES
WIDTH
CENTER WIDTH
PULLBACK
40.5”
40.5”
40.5”
14”
14”
14”
10”
10”
10”
36”
39”
39.5”
40”
34.5”
31”
10.5”
10”
11.5”
12”
10.5”
8.5”
12”
11”
10”
8”
12.5”
9.5”
SUG. RETAIL
$279.95
279.95
279.95
189.95
187.95
189.95
187.95
229.95
159.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
707
SECTION
12
WINDSHIELDS
1803-1502
TOURING
0601-0474
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
1803-1508
FUEL/AIR
SYSTEMS
1803-1507
1803-1505
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0601-0666
ELECTRICAL
0601-0667
LIGHTING
0601-0668
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
708
0601-0745
11/2” “BIG” BUFFALO BARS
•Chrome-plated handlebars for the “biggest fattest” look
•Custom bends for the ultimate in comfort
•Drilled and dimpled for stock controls
•Special risers for all bars (except T-Bars) include upper clamps and feature
hidden clamp bolts, see pages 730-737
•Gauge mounts are available separately for T-Bars, see DASHES & GAUGES section
NOTE: Hydraulic clutch master cylinders may not fit handlebars larger than 1”
in diameter.
PART #
DESCRIPTION
END RISE
WIDTH
11/2” “BIG” BUFFALO BARS
1803-1501
5” T-Bar
6”
31”
0601-0472
6” RadiusT-Bar
6”
31”
1803-1502
7” T-Bar
8”
31”
0601-0474
8” Radius T-Bar
8”
31”
1803-1503
9” T-Bar
10”
31”
1803-1508
Classic style
3”
36”
1803-1507
Bagger style
7”
35”
1803-1504
13” Ape Hangers
13”
41”
1803-1505
16” Ape Hangers
16”
41”
1803-1506
18” Ape Hanger
18”
41”
0601-0666
Beach bars
36”
0601-0667
Bikini bars
33”
0601-0668
Drag bars
31”
0601-0745
Stick
30”
CENTER WIDTH
PULLBACK
8.5”
8.5”
8.5”
8.5”
8.5”
8”
10”
10”
10”
10”
8.5”
8.5”
8.5”
-
6”
6”
6.5”
7”
8”
10”
14”
9.75”
9.75”
9.75”
14.75”
14.75”
6”
-
SUG. RETAIL
$219.95
224.95
219.95
224.95
219.95
209.95
209.95
249.95
249.95
249.95
214.95
214.95
154.95
79.95
SECTION
12
WINDSHIELDS
TOURING
DS-300453
DS-300456
LUGGAGE
SEATS &
SISSY BARS
DS-300458
EXHAUST
FUEL/AIR
SYSTEMS
0601-0670
ENGINE
DS-300461
TRANSMISSION
& DRIVELINE
0601-1027
GASKETS
& SEALS
0601-1030
ELECTRICAL
LIGHTING
Flame detail
TATTOO SERIES 11/4” ENGRAVED BARS
HANDLEBARS,
CONTROLS
& MIRRORS
•Tattoo bars feature an engraved flame design on exposed sections
•Drilled for internal wires; work with standard controls
•Brilliant show chrome or gloss black finish
•Billet gauge mounts for T-Bars are available separately; see DASHES & GAUGES section
•11/4” thick risers are also available to complete the Buffalo look: accept 1” diameter handlebars only
•Handlebar clamps and risers are sold separately; see pages 730-737
CABLES
NOTE: Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models.
NOTE: OEM-style handlebar clamps are not designed for use with these handlebars.
NOTE: Hydraulic clutch master cylinder may not fit handlebars larger than 1” diameter.
END
CENTER
SUG.
PART #
DESCRIPTION
RISE WIDTH WIDTH PULLBACK RETAIL PART #
DESCRIPTION
CHROME 11/4” ENGRAVED BARS
CHROME 11/4” ENGRAVED BARS
DS-300451 6” T-Bar
8.5”
30.0”
9.0”
7.75”
$179.95 DS-300463 12.5” Ape Hangers
DS-300452 8” T-Bar
9.75” 30.0”
9.0”
8.25”
179.95 0601-1032 14 Ape Hangers
DS-300453 10” T-Bar
12.0” 30.0”
9.0”
8.5”
179.95 DS-300464 16” Ape Hangers
DS-300454 Drag Bar
31.0”
8.5”
6.0”
104.95 0601-0669 18” Ape Hangers
DS-300456 Classic style
2.0”
36.5”
10.5”
8.5”
189.95 0601-0670 20” Ape Hangers
DS-300458 Dresser style
4.5”
34.5”
10.5”
12.5”
189.95 BLACK 11/4” ENGRAVED BARS
0601-1027 Drag Bar
DS-300459 Dresser style for Road
5.5”
32.5”
12.0”
16.0”
189.95 0601-1028 12.5” Ape Hangers
King/Road Glide
DS-300460 8.5” Ape Hangers 8.5”
36.5”
11.5”
10.0”
189.95 0601-1029 14 Ape Hangers
0601-1030 16” Ape Hangers
DS-300461 9.5” Ape Hangers
for Springer
9.5”
36.5”
12.0”
10.0”
189.95 0601-1031 18” Ape Hangers
0601-0473
11/4”
RADIUS T-BARS
•All-new design handlebar is a smooth, clean stretch of
steel rather than welded sections
•Chrome-plated finish for a custom look
•Custom bends for the ultimate in comfort
•Drilled and dimpled to accept stock controls
PART #
DESCRIPTION
END RISE WIDTH
CENTER WIDTH
0601-0471 6” radius T-Bar 6”
31”
0601-0473 8” radius T-Bar 8”
31”
-
BRAKES
END
RISE WIDTH
(CONT)
12.5” 35.75”
15
39
16.0” 39.5”
18”
40”
20”
40”
11.5”
10
11.5”
12”
12”
12.0”
11
11.5”
8”
8”
$189.95
189.95
189.95
199.95
199.95
12.5”
15
16.0”
18”
8.5”
11.5”
10
11.5”
12”
6.0”
12.0”
11
11.5”
8”
98.95
164.95
164.95
164.95
174.95
31.0”
35.75”
39
39.5”
40”
CENTER
WIDTH PULLBACK
SUG.
RETAIL
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
PULLBACK
6”
7”
SUG. RETAIL
$164.95
164.95
COVERS,
SECURITY
& GENERAL
709
SECTION
12
WINDSHIELDS
TOURING
0601-0565
0601-0568
0601-0566
LUGGAGE
SEATS &
SISSY BARS
0601-0025
0601-0569
EXHAUST
0601-1005
FUEL/AIR
SYSTEMS
0601-0570
0601-0572
0601-0571
ENGINE
0601-0574
0601-0573
DS-300401
TRANSMISSION
& DRIVELINE
DS-300402
0601-0575
0601-0577
GASKETS
& SEALS
DS-300400
ELECTRICAL
0601-0743
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
710
0601-1024
1" HANDLEBARS
•Seamless steel tubing with a chrome-plated or gloss black finish
•Wide variety of bends so you get that just-right fit and feel
•Available with dimples in a smooth, unknurled style unless noted
PART #
DESCRIPTION
1” CHROME HANDLEBARS
0601-0565
Bagger
0601-0566
Bagger/RK
0601-0567
10" Ape Hanger
0601-0568
12.5" Ape Hanger
0601-0569
12.5" Ape Hanger wide
0601-0025
16" Ape Hanger
0601-00261
16" Ape Hanger
0601-1004
16" Ape Hanger for Narrow Glide
0601-0027
18" Ape Hanger
0601-00281
18" Ape Hanger
0601-1005
18" Ape Hanger for Narrow Glide
0601-0570
Dragster wide
0601-0571
Dragster X-wide
0601-0572
Buckhorn medium
0601-0573
Buckhorn low
0601-0574
Buckhorn high
0601-0575
Flat track
0601-0576
Superbar
0601-0577
Beach bar
DS-300400
6" T-Bar
DS-3004032
6" T-Bar
DS-300401
8" T-Bar
DS-3004042
8" T-Bar
DS-300402
10" T-Bar
DS-3004052
10" T-Bar
0601-0743
Stick style
1” BLACK HANDLEBARS
0601-1024
Superbar
0601-1025
16" Ape Hanger
0601-1026
18" Ape Hanger
1
2
0601-1026
END RISE
WIDTH
CENTER WIDTH
PULLBACK
5.75"
6.25"
10"
12"
12"
16"
16"
8"
18"
18"
8"
9"
6.75"
13"
4.5"
3.5"
4.5"
4"
4"
5.0"
5.0"
6.0"
6.0"
-
33"
29.75"
30.5"
31"
32"
32"
32"
30"
32"
32"
30"
30.5"
31"
34"
31.25"
33"
30.5"
30"
36"
31"
31"
31.0"
31.0"
31.0"
31.0"
30"
9.5"
9.5"
8.5"
8.5"
9.5"
8"
8"
5.5"
8"
8"
5.5"
8.5"
10.5"
8.75"
8.675"
8.75"
7.5"
5.75"
7.75"
8.5"
8.5"
8.5"
8.5"
8.5"
8.5"
-
12.375"
14.75"
11"
12"
12.25"
6"
6"
14.5"
6"
6"
17"
6.75"
6.25"
10.125"
9"
13.5"
11.25"
5.75"
14.25"
10.5"
10.5"
11.5"
11.5"
12.5"
12.5"
-
3.5"
16"
18"
30"
32"
32"
5.75"
8"
8"
5.75"
6"
6"
Not dimpled.
Dimpled and drilled for internal wiring.
SUG. RETAIL
$79.95
79.95
94.95
94.95
94.95
94.95
94.95
98.95
99.95
99.95
98.95
79.95
79.95
79.95
79.95
94.95
79.95
79.95
79.95
99.95
99.95
99.95
99.95
99.95
99.95
54.95
79.95
98.95
98.95
SECTION
12
top
WINDSHIELDS
pullback
width
front
TOURING
rise
0601-0640
0601-0641
center width
LUGGAGE
SEATS &
SISSY BARS
0601-0643
0601-0635
0601-0642
EXHAUST
0601-0636
FUEL/AIR
SYSTEMS
0601-0638
0601-0637
11/4” HANDLEBARS
ENGINE
•Bars feature a full 11/4” diameter in the clamping area
•Knurled; drilled for internal wiring
•Accept most 1” grips and controls
•Available in chrome and black powder-coat finish
NOTE: Bars require the use of risers that accept handlebars with a 11/4” diameter
in clamping area (sold separately).
NOTE: Not for use with stock risers and handlebar/gauge mount clamp on
STYLE
RISE
PULLBACK
CENTER WIDTH
Mini Ape
10
10
7.75
Ape
12.5
10
8
Wide Ape
13
10.5
11
Wide Drag 25
0
6.5
9
Wide Drag 18
0
4
7.5
Broomstick
0
0
0
Drag 18
0
4.75
9.5
Wide TT
5.25
9.5
6.5
BadBoy
3.75
8.5
6.5
TRANSMISSION
& DRIVELINE
0601-0648
883C/1200C models.
WIDTH
CHROME
33.25
0601-0631
35.5
0601-0632
36.5
0601-0633
32
0601-0634
27.5
0601-0635
29
0601-0636
33.5
0601-0637
34.25
0601-0638
33
0601-0639
BLACK
0601-0640
0601-0641
0601-0642
0601-0643
0601-0644
0601-0645
0601-0646
0601-0647
0601-0648
SUG. RETAIL
$260.95
273.95
284.95
192.95
170.95
173.95
192.95
220.95
206.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
HANDLEBARS
•When people think of quality handlebars, Flanders is at the top of the list
•Over fifty years’ experience making the world’s finest handlebars
•All handlebars are made of seamless, cold-drawn steel tubing
•Mandrel-bent for accuracy
•Available in chrome and black
GASKETS
& SEALS
DS-300118
#1
CABLES
NOTE: Dresser-style handlebars are not notched for electronic throttle control.
NOTE: Standard handlebars have 31/2” centered knurling; Springer handlebars have 43/4”
centered knurling.
DS-300131
#2
BRAKES
DS-300114
Original Ape Hanger
0601-0699
DS-300145
Heritage
Style
DS-300113
Tail Ape
Hanger
DASHES
& GAUGES
DS-300187
Z-Bars
0601-0701
RISE
PULLBACK
CENTER
WIDTH
8
7
12.5
12.5
13
13
10
10
7.75
9.5
11
9
8.5
10
10
10.5
10.5
10
10
15
10
10.5
8.5
8.5
8.5
8.5
11
11
8
8
8.5
8
8
FRAMES,
SUSPENSION
& FENDERS
DS-300180
W-Bars
DS-300146
Mini Ape Hanger
0601-0703
STYLE
1” CLASSIC BENDS
#1, chrome
#2, chrome
Original Ape Hanger, chrome
Original Ape Hanger, black
Tall Ape Hanger, chrome
Tall Ape Hanger, black
Mini Ape Hanger, chrome
Mini Ape Hanger, black
Heritage style, chrome
Z-Bars, chrome
TANKS &
OIL FILTERS
WIDTH
UNKNURLED
NO DIMPLES
KNURLED
DIMPLED
KNURLED
DRILLED
KNURLED
SPRINGER
DIMPLED
KNURLED
SPRINGER
DRILLED
35.5
34
34.5
34.5
35
35
34.25
34.25
35
31.5
32
DS-300158
DS-300110
DS-300117
DS-300119
DS-300146
DS-300188
DS-300118
DS-300131
DS-300114
0601-0699
DS-300113
0601-0701
DS-300136
0601-0703
DS-300144
DS-300187
DS-300189
DS-300204
DS-300214
0601-0700
DS-300215
0601-0702
DS-300147
0601-0704
DS-300145
-
DS-300185
DS-300186
DS-300141
-
DS-300148
-
HANDLEBARS continued on next page
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
711
SECTION
12
HANDLEBARS (CONT)
WINDSHIELDS
TOURING
LUGGAGE
DS-300209
Wide Center
Drag Bar
0601-0707
0601-0706
DS-300111
Wide Center
Drag Bar
0601-0705
DS-300152
35” Drag Bar
DS-300205
27” Drag Bar
0601-0711
SEATS &
SISSY BARS
top
0601-0709
pullback
EXHAUST
DS-300121
Broomstick
DS-300219
Narrow
Center
Drag Bar
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
front
center width
FUEL/AIR
SYSTEMS
ENGINE
width
rise
STYLE
1” DRAG BARS
Broomstick 26”, chrome
Broomstick 26”, black
Broomstick 29”, chrome
Broomstick 29”, black
Narrow center 18°, chrome
Narrow center 18°, black
Wide center 18°, chrome
Wide center 18°, black
Wide center 25°, chrome
Wide center 25°, black
27° Drag Bars, chrome
35° Drag Bars, chrome
18° Springer Wide Drag Bars, chrome
RISE
PULLBACK
CENTER
WIDTH
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
4
4
4.5
4.5
6.5
6.5
4.5
10
4.75
0
0
0
0
7.5
7.5
9.5
9.5
9.5
9.5
8.5
7.5
9.5
WIDTH
UNKNURLED
NO DIMPLES
KNURLED
DIMPLED
KNURLED
DRILLED
26
26
29
29
27.5
27.5
33.5
33.5
32.25
32.25
23
28.5
33.5
DS-300156
DS-300157
DS-300199
DS-300126
DS-300116
DS-300205
DS-300149
-
DS-300155
0601-0705
DS-300121
0601-0706
DS-300200
0601-0707
DS-300115
0601-0709
DS-300111
0601-0711
DS-300150
-
DS-300220
DS-300219
0601-0708
DS-300209
0601-0710
DS-300218
0601-0712
DS-300152
-
DS-300527
Springer/
Buckhorn
DS-300227
883 Type
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
BRAKES
STYLE
1” CUSTOM BENDS
883 type, chrome
Bad Boy, chrome
Bad Boy, black
Flat Track, chrome
Swept Back, chrome
FRAMES,
SUSPENSION
& FENDERS
Wide Clubman bar, chrome
Narrow Clubman bar, chrome
Cafe, chrome
Low Cafe, chrome
FOOTRESTS
& LICENSE
PLATE FRAMES
Speedster-type, chrome
Beach Grande bar, chrome
Beach/Knucklehead, chrome
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
712
DS-300201
0601-0163
DS-300128
DS-300151
0601-0162
DS-300173
Super Glide type
DS-300130
Flat Track
DS-300132
Swept back
DASHES
& GAUGES
KNURLED
SPRINGER
DRILLED
DS-300133
Bad Boy
CABLES
TANKS &
OIL FILTERS
KNURLED
SPRINGER
DIMPLED
Super Glide type, chrome
Springer-style Buckhorn, chrome
FX-type Buckhorn, chrome
CALIF. SPREAD
Pullback™, chrome
DS-300230
Fix type
Buckhorn
DS-300178
Pullback™
WIDTH
UNKNURLED
NO DIMPLES
KNURLED
DIMPLED
KNURLED
DRILLED
KNURLED
SPRINGER
DIMPLED
KNURLED
SPRINGER
DRILLED
RISE
PULLBACK
CENTER
WIDTH
3.5
3.5
3.5
5.25
5.25
4.25
4.25
2.5
2.5
2.75
2.5
2.5
5
4.5
3.5
3.5
3.5
3.5
6.5
8
9.5
6.5
7.5
9.5
11.5
7
7
7
8.5
8.25
11
11
7.5
7
7
5
5
9.5
17
10.25
10.5
10.75
11
11.75
12.5
12
10.5
11
12.5
11.5
4.5
7
7
7
4.25
7
4.75
8.5
5.75
7
4.75
7
5.5
10.5
5.5
7.5
8.5
9.5
7.5
7.5
7.5
6.25
6.25
6.5
5.5
29.5
32.25
32.25
34.25
31.5
31
28
31.5
28.75
34.75
32.5
34.75
33.5
38.5
32.5
35
35.75
36.75
30.5
32
30.5
26.75
27
29
30
DS-300125
DS-300324
DS-300327
DS-300192
DS-300202
DS-300159
DS-300320
DS-300194
DS-300198
DS-300161
DS-300171
-
DS-300135
DS-300133
DS-300130
DS-300122
DS-300129
DS-300132
DS-300321
DS-300325
DS-300193
DS-300203
DS-300160
DS-300143
DS-300317
DS-300195
DS-300197
DS-300120
DS-300112
DS-300172
DS-300173
DS-300527
DS-300174
DS-300175
DS-300176
DS-300535
DS-300227
DS-300229
0601-0713
DS-300225
DS-300190
DS-300323
DS-300326
DS-300319
DS-300222
DS-300223
DS-300226
DS-300230
-
DS-300322
DS-300528
-
-
8.5
16.5
8
24.5
DS-300177
DS-300178
-
-
-
SECTION
HANDLEBARS (CONT)
12
WINDSHIELDS
TOURING
DS-300315
Road Glide
style bar
DS-300183
Ultra Classic type
LUGGAGE
DS-300127
Road King
Fatboy type
SEATS &
SISSY BARS
DS-300138
Ultra Classic type
DS-300169
FLT type
STYLE
1” DRESSER TYPE
Road Glide-style bar, chrome
Road King/Fat Boy type, chrome
FLT type, chrome
96 Ultra Classic, chrome
Ultra Classic type, chrome
EXHAUST
RISE
PULLBACK
CENTER
WIDTH
6
6
8
6.25
8
8
7
7.5
9.5
7.5
9.5
16
13
13
13.5
13
14
13.5
14.5
15.5
13
14
6
11
11
9
9
11.25
11
11.5
11.5
11.5
11.5
WIDTH
UNKNURLED
NO DIMPLES
KNURLED
DIMPLED
KNURLED
DRILLED
KNURLED
SPRINGER
DIMPLED
KNURLED
SPRINGER
DRILLED
31.5
35
37
32.5
32.75
32.5
32.25
31
31
34.5
36
DS-300162
DS-300163
DS-300164
-
DS-300315
DS-300124
DS-300127
DS-300134
DS-300166
DS-300168
DS-300169
DS-300537
DS-300503
DS-300137
DS-300138
DS-300316
DS-300210
DS-300212
DS-300213
DS-300183
DS-300184
DS-300540
-
DS-300500
-
#7
DS-300231
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
top
0601-0156
ELECTRICAL
pullback
width
front
rise
#10
DS-300232
STYLE
7/8” BARS
#7 Dirt Track
#10 Dirt Track
#24 Dirt Track
Buell Touring
#24
DS-300233
LIGHTING
0601-0155
center width
RISE
PULLBACK
CENTER WIDTH
WIDTH
CHROME
BLACK
5
4.5
4
8
9.5
8
8.5
8
5
4.5
5
5
32.5
34
33.5
28.75
DS-300206
DS-300207
DS-300208
0601-0155
DS-300231
DS-300232
DS-300233
0601-0156
PRICE LIST
PART #
0601-0155
0601-0156
0601-0162
0601-0163
0601-0699
0601-0700
0601-0701
0601-0702
0601-0703
0601-0704
0601-0705
0601-0706
0601-0707
0601-0708
0601-0709
0601-0710
0601-0711
0601-0712
0601-0713
DS-300110
DS-300111
DS-300112
DS-300113
DS-300114
DS-300115
DS-300116
DS-300117
DS-300118
DS-300119
SUG. RETAIL
$118.95
118.95
121.95
121.95
153.95
153.95
161.95
161.95
147.95
147.95
100.95
106.95
110.95
110.95
121.95
121.95
121.95
121.95
124.95
137.95
121.95
138.95
161.95
153.95
121.95
109.95
141.95
143.95
149.95
PART #
DS-300120
DS-300121
DS-300122
DS-300124
DS-300125
DS-300126
DS-300127
DS-300128
DS-300129
DS-300130
DS-300131
DS-300132
DS-300133
DS-300134
DS-300135
DS-300136
DS-300137
DS-300138
DS-300141
DS-300143
DS-300144
DS-300145
DS-300146
DS-300147
DS-300148
DS-300149
DS-300150
DS-300151
DS-300152
SUG. RETAIL
$136.95
106.95
130.95
147.95
124.95
109.95
153.95
121.95
132.95
132.95
138.95
126.95
124.95
146.95
120.95
147.95
149.95
155.95
147.95
132.95
147.95
147.95
135.95
147.95
147.95
109.95
121.95
121.95
121.95
PART #
DS-300155
DS-300156
DS-300157
DS-300158
DS-300159
DS-300160
DS-300161
DS-300162
DS-300163
DS-300164
DS-300166
DS-300168
DS-300169
DS-300171
DS-300172
DS-300173
DS-300174
DS-300175
DS-300176
DS-300177
DS-300178
DS-300183
DS-300184
DS-300185
DS-300186
DS-300187
DS-300188
DS-300189
DS-300190
SUG. RETAIL
$100.95
89.95
93.95
130.95
112.95
124.95
126.95
135.95
141.95
133.95
149.95
149.95
146.95
136.95
143.95
149.95
132.95
138.95
150.95
143.95
155.95
149.95
155.95
153.95
161.95
141.95
135.95
147.95
132.95
PART #
DS-300192
DS-300193
DS-300194
DS-300195
DS-300197
DS-300198
DS-300199
DS-300200
DS-300201
DS-300202
DS-300203
DS-300204
DS-300205
DS-300206
DS-300207
DS-300208
DS-300209
DS-300210
DS-300212
DS-300213
DS-300214
DS-300215
DS-300218
DS-300219
DS-300220
DS-300222
DS-300223
DS-300225
DS-300226
SUG. RETAIL
$113.95
126.95
120.95
130.95
135.95
124.95
98.95
110.95
110.95
107.95
120.95
143.95
92.95
118.95
118.95
118.95
121.95
147.95
146.95
149.95
153.95
161.95
121.95
110.95
106.95
135.95
136.95
132.95
138.95
PART #
DS-300227
DS-300229
DS-300230
DS-300231
DS-300232
DS-300233
DS-300315
DS-300316
DS-300317
DS-300319
DS-300320
DS-300321
DS-300322
DS-300323
DS-300324
DS-300325
DS-300326
DS-300327
DS-300500
DS-300503
DS-300527
DS-300528
DS-300535
DS-300537
DS-300540
SUG. RETAIL
$120.95
124.95
150.95
118.95
118.95
118.95
147.95
147.95
153.95
153.95
141.95
121.95
121.95
121.95
109.95
116.95
116.95
104.95
146.95
155.95
149.95
149.95
153.95
149.95
146.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
713
SECTION
12
0601-0494
0601-0513
0601-0516
0601-0501
0601-0510
0601-0512
WINDSHIELDS
TOURING
LUGGAGE
0601-0502
0601-0503
SEATS &
SISSY BARS
0601-0777
EXHAUST
0601-0778
0601-0779
FUEL/AIR
SYSTEMS
0601-0780
0601-0773
ENGINE
0601-0774
0601-0775
TRANSMISSION
& DRIVELINE
0601-0782
GASKETS
& SEALS
0601-0776
0601-0783
0601-0785
ELECTRICAL
11/4”
CHUBBY®
HANDLEBARS
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
•Handlebars are 25%
thicker than stock
•Fit 74-09 models including
models with Electronic
Throttle by Wire
(unless noted)
•Designed with fluid bends
0601-0787
at precise angles for maximum comfort and control
•Pre-drilled for internal wiring
•Polished welds and diamond knurled with a show-chrome finish
•Work with hydraulic clutch, stock and most custom controls, stock risers and top clamps
0601-0788
NOTE: Not for use with stock risers and handlebar/gauge mount on 883C/1200C models.
TBW end
NOTE: Not for FLHT/FLHX models except PART #s 0601-0788 and 0601-1053.
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
714
PART #
0601-0493
0601-0494
0601-0498
0601-0513
0601-0516
0601-0505
0601-0507
0601-0517
0601-0501
0601-0510
0601-0512
0601-0502
0601-0503
0601-0777
0601-0778
0601-0779
0601-0780
0601-0781
0601-0773
0601-0774
0601-0775
0601-0782
0601-0776
0601-0783
0601-0784
0601-0785
0601-0786
0601-0787
0601-0788
0601-1053
DESCRIPTION
Pullback Drag bars w/ 6” riser
Low-Profile Pullback Drag bars
Springer Pullback Drag bars
9.5” Springer Ape Hanger bars
12.5” Springer Ape Hanger bars
16” Springer Ape Hanger bars
Springer FLSTS bars
Springer Knuckle bars
Springer Beach bars
Dragster bars
Springer Dragster bars
8.5” Baby Ape Hangers
10” Ape Hanger bars
12.5” Ape Hanger bars
Knuckle bars
FLSTC/FLSTF bars
Road King bars
Road Glide bars
Road King II bars
Beach bars
Psycho Chubby 8” Chopper T-bar bars
Psycho Chubby 10” Chopper T-bar bars
Psycho Chubby 18” Ape Hanger bars
Psycho Chubby 20” Ape Hanger bars
FLHT/C/X Bagger bars
FLHT/C/X 14” Ape Hanger bars
END RISE
4”
5”
6”
4”
4”
9.5”
12.5”
16”
4.5”
2”
3.5”
8.5”
10”
12.5”
14”
16”
2”
4.5”
5.5”
8.5”
5.5”
3.5”
6”
8”
18”
20”
10”
14”
WIDTH
30.5”
30.5”
30.5”
30.5”
30.5”
36.5”
38.5”
37”
34.5”
36.5”
36.5”
30.5”
30.5”
35”
36”
36.5”
36.5”
37”
36.5”
34.5”
32.5”
31”
35.5”
36.5”
30.5”
30.5”
37”
37”
34.5”
36.5”
CENTER WIDTH
8.5”
8.5”
8.5”
8.5”
8.5”
12”
12”
10”
10”
10.5”
11”
8.5”
8.5”
10”
10”
10”
10”
10”
10”
10”
12”
10”
12”
10”
8.5”
8.5”
10”
10”
14”
14”
PULLBACK
10.5”
11.5”
12.5”
14.5”
11”
11.5”
12”
12.5”
12.5”
8.5”
14.75”
6”
6”
11.5”
11.5”
12”
12.5”
12.5”
8.5”
12.5”
16”
14.5”
14.25”
15.25”
7”
8”
12.5”
12.5”
13”
11.5”
SUG. RETAIL
$207.95
207.95
207.95
212.95
296.95
217.95
222.95
236.95
202.95
202.95
212.95
128.95
128.95
217.95
217.95
217.95
219.95
222.95
202.95
202.95
202.95
207.95
202.95
212.95
212.95
212.95
236.95
241.95
212.95
224.95
SECTION
12
WINDSHIELDS
0601-1050
TOURING
11/4” SAMEOLE BARS
•These bars are the same ole ones you had, only better!
•Bigger, beefier, smoother look as you hide your wiring and
add style to your ride
•Mounts to stock risers
•Predrilled for internal wiring
•3/4” wider on each side
•Requires no cable changes
NOTE: Not for use with hydraulic clutch
PART #
DESCRIPTION
FOR 08-09 FLTR (34” WIDE, 8.5” RISE, 3.75” PULLBACK)
0601-1050
Black
0601-1051
Chrome
0601-1052
Raw
LUGGAGE
SEATS &
SISSY BARS
SUG. RETAIL
$229.95
229.95
209.95
PART #
DESCRIPTION
FOR 97-07 FLTR (34” WIDE, 8.5” RISE, 3.75” PULLBACK)
0601-1047
Black
0601-1048
Chrome
0601-1049
Raw
SUG. RETAIL
$199.95
199.95
189.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
0601-1045
TRANSMISSION
& DRIVELINE
0601-0583
0601-0582
GASKETS
& SEALS
0601-0581
11/4”
MENTELE BARS
ELECTRICAL
•King style bars are specifically designed to fit the dimensions of the Road King gas tank
but are also an option for Softail riders looking for a slightly wider bar; will work on Road King with stock length cables and stock controls
•All are dimpled for late-model style controls and predrilled for internal wiring; 08-09 King are notched for throttle-by-wire
•Available in black powder-coat, chrome or raw finish
LIGHTING
11/4” KING MENTELE
PART #
DESCRIPTION
FOR 08-09 MODELS (35.5” WIDE, 4” RISE, 16.5” PULLBACK)
0601-1044 Black powder-coat
0601-1045 Chrome
0601-1046 Raw
SUG. RETAIL
$229.95
236.95
209.95
PART #
DESCRIPTION
FOR 97-07 MODELS (35.5” WIDE, 4” RISE, 16.5” PULLBACK)
0601-1041 Black powder-coat
0601-1042 Chrome
0601-1043 Raw
SUG. RETAIL
$199.95
199.95
189.95
11/4” MENTELE FOR 97-07 MODELS (36” WIDE, 4.5” RISE, 11.5” PULLBACK)
PART #
0601-0581
DESCRIPTION
Black powder-coat
SUG. RETAIL
$199.95
PART #
0601-0582
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DESCRIPTION
Chrome
SUG. RETAIL
$199.95
PART #
0601-0583
DESCRIPTION
Raw
SUG. RETAIL
$189.95
BRAKES
TANKS &
OIL FILTERS
0601-1037
0601-1039
FRAMES,
SUSPENSION
& FENDERS
Notched for
08-09 TBW
1” ERGO BARS
•Three styles designed to cover a large spectrum of riders and preferred riding
positions all with a more relaxed, comfortable wrist position
•Accept stock controls and housings
•Predrilled and slotted for internal wiring
•Available in show chrome or black
0601-0878
ERGO UP BARS
•Designed for the taller torso rider or someone who prefers
a taller bar
•Close to stock bar height
•Relaxed cruiser model, perfect for the shorter rider •Similar pullback as stock bar
•More relaxed wrist position
or even for a taller rider wanting to kick back
•Hand position is higher; arms almost level rather than
•Sportier stance
•Allows for a relaxed seating position
reaching down
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
FOR 08-09 FLHT/FLHX MODELS (CONT)
FOR 86-07 FLHT AND CUSTOM
FOR 08-09 FLHT/FLHX MODELS
Up bars; chrome
$199.95 APPLICATIONS (CONT)
0601-1035
Standard; black
$199.95 0601-1040
0601-0880
Back bars; chrome
$179.95
0601-1036
Standard; chrome
199.95 FOR 86-07 FLHT AND CUSTOM APPLICATIONS
Up bars; black
179.95
Standard; black
179.95 0601-0881
0601-1037
Back bars; black
199.95 0601-0877
Up bars; chrome
179.95
Standard; chrome
179.95 0601-0882
0601-1038
Back bars; chrome
199.95 0601-0878
Back bars; black
179.95
0601-1039
Up bars; black
199.95 0601-0879
STANDARD ERGO BARS
ERGO BACK BARS
DASHES
& GAUGES
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
715
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
0601-0715
0601-0580
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
0601-0716
GASKETS
& SEALS
0601-0686
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
0601-0684
Shown painted
TANKS &
OIL FILTERS
0601-0688
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
716
1” VINTAGE AND VINTAGE SHORT STACK HANDLEBARS
•Add period-style bobber ape-hanger handlebars to your ride
•Inspired by the Roland Sands Design custom dubbed El Borracho
•Available with chrome, black powder-coat or raw finishes
•Chrome and black powder-coated bars are knurled, slotted and drilled
for internal wiring
•Raw handlebars are knurled, but not drilled
•Standard bars have 31/2” on-center knurling; Springer bars have 43/4” on-center knurling
•Feature chrome billet end caps
0634-0110
0634-0111
•Matching seat kit, rear fender kit and gas tank kit are sold separately
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
VINTAGE (30” WIDE X 12” RISE X 6.5” CENTER WIDTH)
VINTAGE SHORT STACK (30” WIDE X 7.5” RISE X 6.5” CENTER WIDTH)
0601-0714
Chrome
$399.95 0601-0686
Chrome
$399.95
0601-0715
Chrome for Springer front ends
399.95 0601-0687
Chrome for Springer front ends
399.95
0601-0580
Raw
369.95 0601-0684
Raw
340.95
0601-0660
Raw for Springer front ends
369.95 0601-0685
Raw for Springer front ends
340.95
0601-0716
Black powder-coat
379.95 0601-0688
Black powder-coat
379.95
0601-0717
Black powder-coat for Springer front ends
379.95 0601-0689
Black powder-coat for Springer front ends
379.95
PART #
DESCRIPTION
REPLACEMENT END CAPS (4-PK.)
0634-0110
Chrome
SUG. RETAIL
$50.95
PART #
DESCRIPTION
REPLACEMENT END CAPS (4-PK.) (CONT)
0634-0111
Raw
SUG. RETAIL
$31.95
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
0601-0694
FUEL/AIR
SYSTEMS
0601-0683
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0601-0693
ELECTRICAL
CUSTOM 1” DRESSER HANDLEBARS
LIGHTING
•Knurled, drilled and slotted for internal wiring and will accept stock controls and housings
•Chrome-plated handlebars available in Convoy, Glider or Lazy Boy styles
NOTE: No provision
PART #
0601-0770
0601-0694
0601-0771
0601-0683
0601-0772
0601-0693
for handlebar air reservoir.
DESCRIPTION
Convoy handlebars for 08-09 FLHT models; 34.4” width, 9” rise, 14.75” center width, 6” pullback
Convoy handlebars for 86-07 FLHT models; 34.4” width, 9” rise, 14.75” center width, 6” pullback
Glider handlebars for 08-09 FLTR models; 33” width, 9” rise, 7.75” center width, 4” pullback
Glider handlebars for 98-07 FLTR models; 33” width, 9” rise, 7.75” center width, 4” pullback
Lazy Boy handlebars for 08-09 FLHT models; 33.3” width, 9” rise, 14.3” center width, 5.75” pullback
Lazy Boy handlebars for 86-07 FLHT models; 33.3” width, 9” rise, 14.3” center width, 5.75” pullback
SUG. RETAIL
$379.95
379.95
279.95
279.95
307.95
307.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
0601-0691
TANKS &
OIL FILTERS
DASHES
& GAUGES
0601-0692
1” “FLAT-OUT” HANDLEBARS
0602-0258
•Steel handlebars with integrated risers on 3.5” center
•Handlebars mount with 1/2”-13 mounting bolts (not included)
•Handlebars are drilled and slotted for internal wiring and accept stock
controls and housings
•Riser extensions are required on these handlebars when used on FXST/
FLST models using the stock gas tank
•Riser extensions are CNC-machined from billet aluminum
•Riser extensions available separately (sold in pairs)
0602-0257
•Available in chrome and black powder-coated finishes
PART #
DESCRIPTION
HANDLEBARS
0601-0691
Chrome finish; 1.5” rise, 32” width, 4” pullback
0601-0692
Black powder-coat finish; 1.5” rise, 32” width, 4” pullback
21/4” RISER EXTENSIONS
0602-0258
Chrome (pr.)
0602-0257
Black anodized (pr.)
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$183.95
172.95
89.95
89.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
717
SECTION
12
WINDSHIELDS
0601-1062
TOURING
0601-1061
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
Notched for
electronic
throttle control
0601-1063
Side view
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
0601-1064
0601-1060
GASKETS
& SEALS
0601-1066
ELECTRICAL
11/4” HANDLEBARS
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
•11/4” handlebars with 1” clamping area
•Fly-by-wire compatible
•Notched for electronic throttle control
•Polished welds
•Dimpled and drilled for wiring
0601-1067
FOR FLHT, FLHX MODELS
FOR FLTR, FLHR, FLSTF, FLST AND FLSTN MODELS (EXCEPT SPRINGERS)
PART #
DESCRIPTION
10” H, 37” W, 5.5” PULLBACK
0601-1061
Chrome
0601-1062
Gloss black
0601-1063
Flat black
SUG. RETAIL
$285.95
285.95
285.95
PART #
DESCRIPTION
12” H, 32” W, 5” PULLBACK
0601-1064
Chrome
0601-1065
Gloss black
0601-1066
Flat black
SUG. RETAIL
$285.95
285.95
285.95
PART #
DESCRIPTION
17” H, 37” W, 5” PULLBACK
0601-1060
Chrome
0601-1067
Gloss black
0601-1068
Flat black
SUG. RETAIL
$285.95
285.95
285.95
BRAKES
TANKS &
OIL FILTERS
0601-0697
DASHES
& GAUGES
0601-1002
FRAMES,
SUSPENSION
& FENDERS
0601-0698
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
718
0601-1003
11/4" RETRO FLOATING-STYLE HANDLEBARS
•Patented underbar construction leaves bars looking clean
•High-quality steel construction with a chrome or black finish
•Dimpled and drilled for internal wiring
•For use with all 1" diameter risers and with any center distance, including
Springer models except FLHTC and FLHTCU
•Measure 33" wide; 10" center width; 73/4" end-rise; 111/2" pullback
PART #
DESCRIPTION
SUG. RETAIL
0601-0697
Chrome
$269.95
0601-0698
Black
249.95
1” HANDLEBARS
•Great replacement for your stock Harley or addition to
your new custom
•Polished 304 stainless steel with .109” wall thickness
•Fits 1” diameter risers
•Will not chip or rust
END
CENTER
SUG.
PART #
DESCRIPTION
RISE WIDTH WIDTH PULLBACK RETAIL
0601-1002 10" Mini Ape Hangers 10" 35"
9.5"
7"
$199.95
0601-1003 Super Duper
4"
29.5" 6.5"
5"
199.95
SECTION
12
0601-0374
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
11/4” PULLBACK HANDLEBARS
•Smooth design for rider comfort
•Made from thick .157 wall tubing with
arcing radial bends; TIG welded
•Includes built-in riser
•Standard measures 30” W with 22” pullback; Wide measures 34” W with 20” pullback
•Standard handlebar mounting widths
PART #
DESCRIPTION
SUG. RETAIL
allow mounting to most trees
0601-0374
Standard
$299.95
•Available in raw finish only
0601-0375
Wide
299.95
0601-0374
EXHAUST
FUEL/AIR
SYSTEMS
0601-0375
ENGINE
0601-0559
0601-0555
TRANSMISSION
& DRIVELINE
0601-0546
GASKETS
& SEALS
0601-0549
0601-0560
ELECTRICAL
0601-0557
LIGHTING
0601-0551
HANDLEBARS,
CONTROLS
& MIRRORS
0601-0528
0601-0554
CABLES
0601-0553
0601-0556
11/4” BURLY BARS
BRAKES
•All-chrome bars feature a new tapered technology in the hand control area allowing
the customer the freedom to use OEM or aftermarket controls (including hydraulic
clutch controls)
•Dimpled and drilled for internal wiring (unless noted)
•Classic, Cruiser, Knuckle, Daytona, Gorilla and Apehanger bars have knurled centers
•For handlebar clamps and risers, see pages 730-737
•Optional gauge mounts available for T-bar style Drag bars; see DASHES & GAUGES section
PART #
DESCRIPTION
WIDTH
RISE
BURLY BARS
0601-0559
Drag bar
31”
0”
0601-0555
Riser drag bar w/ 30° rake
31”
3”
0601-0546
31”
71/4”
0601-0547
31”
9”
0601-0562
31”
10”
0601-0548
Apehanger bar
351/2”
97/8”
0601-0549
Cruiser bar
361/4”
35/8”
0601-0560
Springer Ape bar
371/4”
87/8”
0601-0558
Springer-style drag bar
321/2”
0”
0601-0557
Springer-style knuckle bar
331/2”
43/8”
0601-0550
Knuckle bar
35”
51/8”
0601-0551
Beach bar
381/2”
27/8”
0601-05521
Beach bar
381/2”
33/8”
0601-0528
Gorilla bar
361/4”
20”
0601-0529
Gorilla bar
361/2”
18”
0601-0553
Gorilla bar
383/4”
16”
0601-0554
Bikini bar
351/4”
25/8”
0601-0556
Classic bar
36”
13/8”
0601-0561
Daytona bar
371/2”
33/4”
1
TANKS &
OIL FILTERS
0601-0561
CENTER WIDTH
PULLBACK
9”
101/2”
101/2”
101/2”
101/2”
133/4”
13”
14”
101/2”
131/4”
113/4”
91/2”
9”
14”
14”
14”
123/4”
101/2”
10”
53/4”
73/4”
101/2”
111/2”
13”
111/2”
101/2”
91/2”
51/4”
113/4”
12”
153/4”
151/2”
10”
10”
10”
143/4”
73/4”
12”
Not drilled or dimpled.
SUG. RETAIL
$115.95
171.95
174.95
174.95
178.95
178.95
168.95
178.95
115.95
171.95
168.95
168.95
166.95
192.95
186.95
181.95
168.95
168.95
168.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
719
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
11/2” BURLY SUPER RISER DRAG BARS
•Super oversize 11/2” tubing for both riser and bar
•Comfortable pullback design
•Available in low, standard and high-rise designs
•Wiring may be run externally or through pre-drilled
•Work with OEM H-D and most aftermarket controls
•Will not accept a hydraulic clutch
PART #
DESCRIPTION
0601-0006
Riser drag bar (low)
0601-0007
Riser drag bar (medium)
0601-0008
Riser drag bar (high)
0601-0006
inner slots in the bars’ dimples
WIDTH
31.5”
31.5”
31.5”
RISE
6.50”
8.25”
9.0”
CENTER WIDTH
8.5”
8.5”
8.5”
PULLBACK
5.25”
6.5”
7.25”
SUG. RETAIL
$252.95
252.95
252.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
0601-0846
GASKETS
& SEALS
0601-0849
0601-0845
ELECTRICAL
CUSTOM HANDLEBARS
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
•High-quality steel tubing with 31/2” on-center knurling
•Slotted and drilled for internal wiring
•Narrow Apes feature a narrow center/tapered design for a great
new look on narrow glide front ends
•11/4” bars accept stock risers and clamps
•Available in black or chrome finish
NOTE: PART #0601-0851 is not recommended
for use with ABS braking system.
PART #
DESCRIPTION
FINISH
1”
0601-0846
Narrow Ape
Black
0601-0847
Narrow Ape
Chrome
0601-0848
Narrow Ape
Black
0601-0849
Narrow Ape
Chrome
11/4”
0601-0845
Gorilla Apehanger
Chrome
0601-0850
97-07 FLHT/FLHX
Chrome
0601-0851
08-09 FLHT/FLHX (TBW)
Chrome
0601-0850
END RISE
WIDTH
CENTER WIDTH
PULLBACK
14”
14”
16”
16”
321/2”
321/2”
321/2”
321/2”
41/4”
41/4”
41/4”
41/4”
7”
7”
7”
7”
14”
13”
13”
39”
381/4”
381/4”
14”
111/2”
111/2”
10”
51/2”
51/2”
SUG. RETAIL
$122.95
144.95
122.95
144.95
182.95
247.95
285.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
720
DS-300237
DS-300235
DS-300240
1” BEACH BARS
•Get retro with these ‘40s style handlebars
•Constructed from high-quality steel tubing
with a knurled center
•Highly polished, brilliantly chrome-plated
PART #
DESCRIPTION
SUG. RETAIL
BEACH BARS (39.5” WIDE, 9.5” CENTER WIDTH,
4.5” RISE, 14.75” PULLBACK)
DS-300246
Dimpled and drilled
$108.95
DS-300235
Dimpled
105.95
DS-300236
No dimples
105.95
DS-300238
PART #
DESCRIPTION
SUG. RETAIL
BIKINI BEACH BARS (36” WIDE, 8” CENTER
WIDTH, 4.5” RISE, 12.75” PULLBACK)
DS-300248
Dimpled and drilled
$108.95
DS-300237
Dimpled
105.95
DS-300238
No dimples
99.95
1” CHROME LONGHORN BARS
•Constructed of steel tubing with
knurled center
•Similar in design to the Beach Bar
PART #
DESCRIPTION
SUG. RETAIL
LONGHORN BARS (39” WIDE, 9.5” CENTER WIDTH,
7.5” RISE, 17.25” PULLBACK)
DS-300239
Dimpled
$105.95
DS-300240
No dimples
99.95
SECTION
12
WINDSHIELDS
DS-300274
TOURING
DS-300275
DS-300273
LUGGAGE
SEATS &
SISSY BARS
DS-300276
EXHAUST
DS-300277
FUEL/AIR
SYSTEMS
ENGINE
SUPER SWEEP TEE BARS
•Chrome-plated Tee bars have greater pullback for a more-raked
appearance – 21/2” more pullback than Clean Sweep bars
•Drilled for internal wiring; come with pull-through string for easy wire routing
•1/2-13 threads on 31/2” centers
•All welds are smoothed and polished by hand to ensure the best possible finish
•High-quality packaging keeps bars in prime condition during shipping
•Optional gauge mounts available, see DASHES & GAUGES section
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
DS-300274
NOTE: 5” and 7” rise bars will not clear tank-mounted gauges; custom gauge
mounting required.
ELECTRICAL
NOTE: Hydraulic clutch master cylinders may not work on larger than 1” in diameter bars.
NOTE: New handlebar bushings recommended.
PART #
11/4” SUPER SWEEP TEE BARS
DS-300275
DS-300276
DS-300277
11/2” SUPER SWEEP TEE BARS
DS-300272
DS-300273
DS-300274
DESCRIPTION
SUG. RETAIL
5” rise; 311/2” width; 6” pullback
9” rise; 311/2” width; 81/2” pullback
$279.95
279.95
279.95
375.95
375.95
375.95
11/4” BEEFY BAR
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
•Features a smooth center and mounts to stock risers
•Seamless two-piece tube design
•Accepts 82-09 switch housings
•Clamps and risers available separately, see pages 730-737
BRAKES
PART #
0601-0673
LIGHTING
DESCRIPTION
Freeway Flyer bars, 5” rise; 381/2” wide; 9” pullback
SUG. RETAIL
$258.95
0601-0199
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
11/2” SLICKBACK AND LOWDOWN BARS
TIRES,
TUBES &
WHEELS
0601-0200
•Chrome-plated tee bars with a clean sleek look
•Slickback bar features rope routed through wiring passages for easier installation
•1/2”-13 threads on 31/2” centers
PART #
DESCRIPTION
0601-0199
Slickback bar, 7” rise; 32” wide; 12” pullback
0601-0200
Lowdown bar, 51/2” rise; 311/2” wide; 12” pullback
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$383.95
383.95
COVERS,
SECURITY
& GENERAL
721
SECTION
12
WINDSHIELDS
DS-300268
TOURING
DS-300270
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
DS-300271
DS-300270
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
CLEAN SWEEP TEE BARS
•Clean, radius sweep design for a flowing look
•Chrome-plated handlebars with two diameters available
•Drilled for internal wiring; feature rope routed through wiring passages for easier wire installation
•All welds are smoothed and polished by hand to ensure the best possible finish
•Dimpled for use with 82-09 controls
•1/2”-13 threads on 31/2” center risers
•Top-quality packaging keeps bars from getting damaged during shipping
•Bushings available separately, see pages 737-738
•Optional gauge mounts available separately, see DASHES & GAUGES section
NOTE: New bushings are recommended.
PART #
DESCRIPTION
11/4” CLEAN SWEEP TEE BARS
DS-300266
DS-300267
DS-300268
SUG. RETAIL
$279.95
279.95
279.95
PART #
DESCRIPTION
11/2” CLEAN SWEEP TEE BARS
DS-300269
DS-300270
DS-300271
SUG. RETAIL
DESCRIPTION
Street bars, 5” rise; 36” wide; 7” pullback
SUG. RETAIL
$375.95
$375.95
375.95
375.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
722
11/2” HOGHANDLES
•Fat, chrome-plated handlebars
•Pre-drilled and dimpled
•For use with 82-09 handlebar controls
•Carlini risers must be used with Street bars
•Road King risers come with bushings and are designed to
fit under the OEM handlebar cover
•Risers and bushings available separately, see pages 730-738
NOTE: New bushings are recommended.
PART #
DS-300258
SECTION
12
WINDSHIELDS
TOURING
0601-0794
LUGGAGE
0601-0763
SEATS &
SISSY BARS
0601-0764
11/4” HANDLEBARS FOR BAGGERS
EXHAUST
•Available in 13” and 16” heights
•Unique contours allow handlebars to fit FLT/FLHT/FLHX without any modifications to the fairing
•Drilled for internal wiring; accept stock handlebar clamp, risers, controls and optional hydraulic clutch controls
•31/2” on-center knurling
NOTE: No provisions for handlebar air reservoir.
PART #
DESCRIPTION
FOR 08-09 FLHT, FLHX, FLHR, FLTR MODELS
0601-0763
13” Ape Hanger, chrome
0601-0792
13” Ape Hanger, black powder-coated
0601-0764
0601-0793
FOR 80-07 FLHT, FLHX, FLHR, FLTR MODELS
0601-0384
0601-0794
0601-0385
0601-0795
0601-0795
FUEL/AIR
SYSTEMS
END RISE
WIDTH
CENTER WIDTH
PULLBACK
SUG. RETAIL
13”
13”
16”
16”
37”
37”
37”
37”
15.75”
15.75”
15.75”
15.75
8.5”
8.5”
8.5”
8.5”
$247.95
247.95
247.95
247.95
13”
13”
16”
16”
37”
37”
37”
37”
15.75”
15.75”
15.75”
15.75”
8.5”
8.5”
8.5”
8.5”
189.95
189.95
189.95
189.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
11/4” MULTI-FIT
“THROTTLE BY WIRE”
APEHANGERS
•Chrome finish with 31/2” oncenter knurling
•Drilled for internal wiring;
accept stock handlebar clamp,
risers, controls and optional
hydraulic clutch controls
NOTE: Not for FLHT/FLHX models.
END
PART #
DESCRIPTION
RISE
0601-0790 10” Apehanger 10”
0601-0789 13” Apehanger 13”
0601-0791 16” Apehanger 16”
HANDLEBARS,
CONTROLS
& MIRRORS
0601-0789
11/4” 10” APE HANGER HANDLEBAR
WIDTH
36.5”
36.5”
36.5”
CENTER
WIDTH
11.75”
10”
10”
PULLBACK
8.5”
8.5”
10”
SUG.
RETAIL
$247.95
247.95
247.95
•Chrome finish with 31/2” on-center knurling
•Drilled for internal wiring; accepts stock handlebar clamp, risers, control
and optional hydraulic clutch controls
•Measure 37” wide; 10” end rise; 15.75” center width; 8.5” pullback
NOTE: Not for FLHT/FLHX models.
PART #
DESCRIPTION
0601-0578
For 94-07 FLHR
FINISH
Chrome
SUG. RETAIL
$169.95
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
0601-0798
FOOTRESTS
& LICENSE
PLATE FRAMES
11/4” HANDLEBARS
•High-grade steel tube construction
•Chrome finish
•Full 11/4” diameter in the clamping area
•Drilled for internal wiring; accept stock handlebar controls
or optional hydraulic clutch control
NOTE: Will require the use of risers that accept handlebars
with a 11/4” diameter clamping area; see pages 730-737
PART #
DESCRIPTION
END RISE
0601-0798
Short Beachbar
3.5”
0601-0796
13” Apehanger
13”
0601-0797
16” Apehanger
16”
0601-0797
TIRES,
TUBES &
WHEELS
0601-0796
HARDWARE,
CHEMICALS
& TOOLS
WIDTH
36”
36.5”
36.5”
CENTER WIDTH
11”
10”
10”
PULLBACK
12.5”
8.5”
8.5”
SUG. RETAIL
$185.95
169.95
169.95
COVERS,
SECURITY
& GENERAL
723
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
0601-0816
0601-0805
SEATS &
SISSY BARS
0601-0808
EXHAUST
FUEL/AIR
SYSTEMS
0601-0806
0601-0811
ENGINE
TRANSMISSION
& DRIVELINE
0601-0822
GASKETS
& SEALS
0601-0823
ELECTRICAL
0601-0826
0601-0824
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
0601-0827
0601-0833
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
724
0601-0832
1" CHROME HANDLEBARS
•14-gauge steel tubing
•Diamond knurled for OEM risers on 31/2" centers to prevent slippage
•Available in OEM and custom bends
•Available with or without wire dimples for late-model controls
0601-0834
NOTE: Not for 08-09 models with electronic throttle control, unless noted.
CUSTOM BENDS
PART #
0601-0816
0601-0819
0601-0808
0601-0803
0601-0805
0601-0807
0601-0804
0601-0806
0601-0809
0601-0810
0601-0811
0601-0823
0601-0820
0601-0821
0601-0822
0601-0824
0601-0825
0601-0826
0601-0827
0601-0832
0601-0833
0601-0834
DESCRIPTION
10" rise ape hangers (dimpled)
10" rise ape hangers (drilled)
Narrow glide 12" rise ape hangers (dimpled)
12" rise ape hangers
Springer 12" rise ape hangers (dimpled)
Springer 16" rise ape hangers (dimpled)
Buckhorn bars (dimpled)
Glide-style bars (dimpled)
Glide-style bars
Glide-style bars (dimpled)
Bad Boy bars (dimpled)
Fatboy-style bars
Stretch Bad Boy bars (dimpled)
Tall Heritage style bars (dimpled)
Sweeper bars (dimpled)
WIDTH
32.80"
32.80"
30.47"
33.45"
33.45"
33.45"
36.13"
35.13"
35.13"
35.13"
35.13"
27.84"
35.03"
35.03"
35.03"
31.17"
32.57"
31.17"
31.55"
28.26"
31.76"
34.26"
CENTER WIDTH
6.35"
6.35"
5.00"
7.86"
7.86"
7.86"
8.04"
8.04"
8.04"
7.94"
7.94"
7.95"
10.35"
10.35"
10.35"
6.90"
12.09"
5.97"
8.06"
5.00"
8.50"
12.00"
PULLBACK
7.19"
7.19"
6.91"
6.91"
6.91"
6.91"
6.80"
6.80"
6.80"
6.80"
6.80"
9.27"
6.81"
6.81"
6.81"
4.20"
9.01"
4.20"
5.34"
6.41"
6.41"
6.41"
RISE
8.13"
8.13"
9.98"
10.20"
10.20"
10.20"
13.65"
13.65"
13.65"
15.65"
15.65"
6.28"
3.41"
3.41"
3.41"
6.01"
4.27"
8.20"
13.13"
9.49"
9.49"
9.49"
SUG. RETAIL
$51.95
61.95
51.95
49.95
53.95
53.95
53.95
56.95
56.95
64.95
67.95
51.95
49.95
47.95
49.95
49.95
47.95
49.95
51.95
63.95
63.95
63.95
SECTION
12
1" CHROME HANDLEBARS (CONT)
WINDSHIELDS
0601-0842
0601-0836
0601-0837
TOURING
LUGGAGE
0601-0844
CUSTOM BENDS (CONT)
PART #
0601-0835
0601-0836
0601-0837
0601-0838
0601-0839
0601-0840
0601-0841
0601-0842
0601-0843
0601-0844
DESCRIPTION
Sweeper bars for 08-09 models
(except FLHT/FLHX) (dimpled)
(except FLHT/FLHX) (dimpled)
Low-rise drag bars (dimpled)
Standard drag bars
Standard drag bars (dimpled)
WIDTH
31.76"
31.57"
34.07"
CENTER WIDTH
8.50"
8.50"
12.00"
PULLBACK
6.41"
7.54"
7.84"
RISE
9.49"
10.90"
10.83"
SUG. RETAIL
$63.95
63.95
63.95
31.76"
34.26"
8.50"
12.00"
6.41"
6.41"
9.49"
9.49"
79.95
79.95
31.57"
34.07"
26.30"
27.23"
27.23"
8.50"
12.00"
6.31"
8.25"
8.25"
7.54"
7.84"
5.32"
3.81"
3.81"
10.90"
10.83"
2.70"
0"
0"
79.95
79.95
51.95
38.95
47.95
w/ electronic throttle control
w/ electronic throttle control (dimpled)
w/ electronic throttle control
w/ electronic throttle control (dimpled)
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
0601-0813
0601-0812
0601-0802
0601-0818
GASKETS
& SEALS
0601-0814
ELECTRICAL
0601-0801
0601-0815
OEM REPLACEMENT BENDS
PART #
DESCRIPTION
0601-0812
For 87-07 FLST models; repl. OEM #56569-86
0601-0818
For 97-04 FLSTS; repl. OEM #55933-97
0601-0813
For 88-06 FXSTS; repl. OEM #56093-88A
0601-0802
For 82-03 FXST, FXDB, FXR, FX, XL OEM #56081-82 (low)
0601-0817
For 95-97 FXSTSB; repl. OEM #56094-95
0601-0814
For 90-00 FLSTF, FLSTN, 82-84 FLH, 94-99 FLHR; repl. OEM #5919-82
0601-0815
For 87 FXRS, 91 FXDB-S 86-08 883, 83-85 XLS; repl. OEM #56082-83
0601-0801
For 74-81 FX, XL; repl. OEM #56086-81 (medium)
WIDTH
31.32"
30.19"
27.69"
26.84"
31.17"
32.57"
27.14"
23.57"
CENTER WIDTH
7.46"
9.25"
7.94"
5.46"
6.90"
12.09"
4.71"
5.30"
PULLBACK
5.22"
9.01"
9.59"
8.99"
4.20"
9.01"
4.85"
9.50"
RISE
11.41"
4.81"
4.75"
4.10"
6.01"
4.27"
4.64"
6.47"
LIGHTING
SUG. RETAIL
$49.95
49.95
49.95
49.95
49.95
49.95
49.95
47.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
0601-0828
11/4" FAT APE HANGER HANDLEBARS
FOOTRESTS
& LICENSE
PLATE FRAMES
0601-0829
•Highly polished, duplex nickel chrome-plated steel
•11/4"-diameter formed handlebars with 1" center mounting section and 1" grip mounts
•Pre-drilled for internal wiring
•31/2" on center clamping width is 5.5" to accommodate one-piece top riser clamps
•Work with standard controls and grips
•Do not fit with hydraulic clutch
PART #
DESCRIPTION
WIDTH
CENTER WIDTH
FOR 74-09 MODELS (EXCEPT FLT/FLHT/FLHX AND MODELS WITH ELECTRONIC THROTTLE CONTROL)
0601-0828
12" rise
34.45"
7.5"
0601-0829
16" rise
34.88"
7.5"
FOR 08-09 FLHR/FLTR W/ ELECTRONIC THROTTLE CONTROL
0601-0830
12" rise
34.45"
7.46"
0601-0831
16" rise
34.88"
7.46"
TIRES,
TUBES &
WHEELS
PULLBACK
END RISE
7.6"
7.68"
10.08"
14.32"
$145.95
149.95
7.6"
7.68"
10.08"
14.32"
145.95
149.95
SUG. RETAIL
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
725
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
0601-0533
0601-0536
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0601-0535
0601-0538
1" APE HANGERS
•For that old-school chopper look
•Available in non-dimpled and dimpled styles
PART #
DESCRIPTION
SUG. RETAIL
NON-DIMPLED
0601-0532 24" rise, 41" width, 8" center width, 11" pullback
$101.95
95.95
52.95
0601-0535 13" rise, 34.25" width, 8" center width, 11" pullback
52.95
PART #
DIMPLED
0601-0536
0601-0537
0601-0538
0601-0539
DESCRIPTION
24"
20"
16"
13"
rise,
rise,
rise,
rise,
41"
39"
37"
34"
width,
width,
width,
width,
SUG. RETAIL
8"
8"
8"
8"
center
center
center
center
width,
width,
width,
width,
11"
11"
11"
11"
pullback
pullback
pullback
pullback
$116.95
110.95
67.95
67.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1803-2610
1803-2612
CABLES
BRAKES
1803-2611
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1803-2613
CHROME 1" "Z" HANDLEBARS
•For that real chopper look
•Dimpled; accept standard riser clamp
•Available in two rises and two widths
PART #
DESCRIPTION
1803-2610
6" rise, 24.5" width, 7.5" center width, 12.5" pullback
1803-2611
6" rise, 26.5" width, 10" center width, 12.5" pullback
FOOTRESTS
& LICENSE 11/4" UNIVERSAL 666 BARS
PLATE FRAMES •High-grade steel tube construction
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
726
SUG.
RETAIL
$103.95
103.95
PART #
1803-2612
1803-2613
DESCRIPTION
8" rise, 24.5" width, 7.5" center width, 12.5" pullback
8" rise, 26.5" width, 10" center width, 12.5" pullback
•Chrome finish that is beautifully hand-polished
•Has extra bends in the bar for a unique look
and extra pullback
•Can be used with hydraulic clutch setups
•Bars with a 1" clamping area are necked down to accept most 31/2"
Etched logo
on-center risers; bars with a 11/4" clamping area require special risers
to mount, see pages 730-737 for risers
•Bars measure approximately 38" wide with 14" of pullback
RISE
PART #
SUG. RETAIL RISE
PART #
SUG. RETAIL
HANDLEBARS W/ 1" CLAMPING AREA
HANDLEBARS W/ 11/4" CLAMPING AREA
16"
0601-0607
$236.95 16"
0601-0608
$236.95
18"
0601-0609
236.95 18"
0601-0610
236.95
0601-0608
SUG.
RETAIL
$116.95
116.95
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
0601-0747
0601-0754
SEATS &
SISSY BARS
0601-0752
11/4” FLYIN’ APES HANDLEBARS
•Hand polished and beautifully chrome finished high-grade steel tubing
•Available in two styles: 1” knurled style has the clamping area necked down to 1” to accept most standard 31/2” o.c. risers;
11/4” unknurled style has a 11/4” diameter clamping area and will require special risers to mount (see pages 730-737)
•Designed for stock style or custom controls
•Can be used with hydraulic clutch setups
•Bars measure approximately 34” wide with 11” of pullback
NOTE: Not for use with stock handlebar/gauge mounts on 883C/1200C models.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
WITH 1" DIAMETER CLAMPING AREA
WITH 11/4" DIAMETER CLAMPING AREA
0601-0747
12" rise
$349.95 0601-0751
12" rise
0601-0748
14" rise
349.95 0601-0752
14" rise
0601-0749
16" rise
349.95 0601-0753
16" rise
0601-0750
18" rise
349.95 0601-0754
18" rise
Etched
logo
EXHAUST
FUEL/AIR
SYSTEMS
SUG. RETAIL
$349.95
349.95
349.95
349.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
1803-2002
1803-2001
ELECTRICAL
0601-0681
0601-0680
11/4” Z-BAR STYLE HANDLEBARS
•These creative handlebar designs are the baddest
•Drilled and dimpled for OEM controls
•Accept standard 1” handlebar risers and clamps; sold separately, see pages 730-737
•Handcrafted in the U.S.A.
NOTE: Not for use with stock handlebar/gauge mounts on 883C/1200C
PART #
DESCRIPTION
END RISE
1803-2001
Outlaw "Z"
2.75"
1803-2002
Mutha 16"
16"
0601-0325
Mutha 18"
18"
0601-0680
Slim Mutha 12"
12"
0601-0681
Slim Mutha 16"
16"
0601-0682
Shorty H
3"
models.
WIDTH
31.5"
38"
38"
38"
38"
33"
LIGHTING
0601-0682
PULLBACK
3"
8.5"
8.5"
8.5"
8.5"
5"
CENTER WIDTH
14.5"
14.5"
11"
SUG. RETAIL
$299.95
299.95
299.95
299.95
299.95
299.95
Etched
logo
0601-0319
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
0601-0320
DASHES
& GAUGES
0601-0322
11/4” HANDLEBARS
•For use in 1” stock-style handlebar clamps
•Dimpled and drilled for use with stock-type controls; can use internal wiring
•Accept 1” bar grips and controls
•Chrome-plated for long-lasting good looks
•Fit most models with risers 31/2” on-center
•Ape Hanger bars for touring models have custom bends to clear FLHT fairings
NOTE: Not for use with stock handlebar/gauge mounts on 883C/1200C
PART #
DESCRIPTION
END RISE
BARS FOR STANDARD MODELS
0601-0319
Classic style
41/2"
0601-0320
Drag bars
0601-0321
Ape Hanger
12"
0601-0357
Ape Hanger
14"
0601-0322
Ape Hanger
16"
0601-0323
Ape Hanger
18"
0601-0324
Ape Hanger
20"
BARS FOR TOURING MODELS (EXCEPT 08-09 FLHT/FLHR/FLTR/FLHX)
0601-0314
Ape Hanger
12"
0601-0315
Ape Hanger
14"
0601-0316
Ape Hanger
16"
0601-0317
Ape Hanger
18"
0601-0318
Ape Hanger
20"
models.
WIDTH
FRAMES,
SUSPENSION
& FENDERS
0601-0316
PULLBACK
CENTER WIDTH
341/2"
31"
40"
40"
40"
40"
40"
10"
6"
8"
8"
8"
8"
8"
101/2"
81/2"
12"
12"
12"
12"
12"
401/2"
401/2"
401/2"
401/2"
401/2"
10"
10"
10"
10"
10"
14"
14"
14"
14"
14"
SUG. RETAIL
$139.95
119.95
179.95
179.95
179.95
219.95
219.95
189.95
189.95
219.95
219.95
219.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
727
SECTION
12
WINDSHIELDS
TOURING
0601-0614
0601-0613
LUGGAGE
0601-0612
SEATS &
SISSY BARS
0601-0617
EXHAUST
0601-0615
0601-0616
FUEL/AIR
SYSTEMS
ENGINE
0601-0618
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
0601-0874
0601-0620
0601-0619
HEFTY 11/4” HANDLEBARS
Etched logo
•Handlebars are 11/4” in diameter with a chrome-plated, polished finish
•All bars are dimpled and drilled for internal wiring
•Tapered for clearance of master cylinders and hydraulic clutch assemblies
•Non-Ape Hanger-style bars will fit with most stock cables; check before installing
•Handlebars have a 11/4” diameter in the clamping area and will require the use of special risers sold separately,
see pages 734-736
NOTE: Not for use with stock handlebar/gauge mounts on 883C/1200C models.
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
PART #
0601-0611
0601-0612
0601-0613
0601-0614
0601-0615
0601-0616
0601-0617
0601-0618
0601-0619
0601-0875
0601-0620
0601-0876
0601-0874
DESCRIPTION
Road King
Beach bar
Drag bar
Knuckle bar
Dresser bar
Bagger
8.5” Ape Hanger
10” Ape Hanger
12.5” Ape Hanger
14” Ape Hanger
16” Ape Hanger
18” Ape Hanger
Liner
RISE
4.75”
2.875”
2.375”
3.875”
4.5”
9”
11”
11.75”
14”
16.5”
18”
10”
PULLBACK
12.5”
14.75”
6.25”
8”
11”
14.75”
10”
10”
12”
10.5”
10.5”
10.5”
9”
CENTER WIDTH
10”
8.5”
8”
9”
9.5”
9.5”
9”
9.5”
10”
10.5”
10.5”
10.5”
8”
WIDTH
34”
36”
30.5”
36.5”
35”
32.25”
37.5”
38”
36.5”
39.5”
39.5”
39.5”
39”
SUG. RETAIL
$134.95
134.95
82.95
134.95
134.95
134.95
134.95
144.95
144.95
144.95
144.95
144.95
144.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
728
DS-300039
APE HANGERS
WITH RISERS
1” FLATTRACK-STYLE HANDLEBARS
•Two diameters available
•1/4”-20 riser thread
PART #
DESCRIPTION
DS-300039 1” bars
DS-300049 11/4” bars
WIDTH
33”
39”
RISE
19”
19”
PULLBACK
8”
10”
SUG. RETAIL
$139.95
229.95
•Chrome-plated steel handlebars pull back closer to the rider for comfort
while maintaining a performance look
PART #
DS-300014
DESCRIPTION
Dimpled bars, 29.25” w/ 4.5” rise/8” pullback
SUG. RETAIL
$80.95
SECTION
12
WINDSHIELDS
1803-0282
1803-0280
TOURING
1803-0280
LUGGAGE
1803-0281
CUSTOM 11/4”
HANDLEBARS
•Chrome-plated
polished steel
•Dimpled and drilled
for internal wiring
•Original Ness styles
from the ‘70s
PART #
DESCRIPTION
1803-0280
Fly-Hi
1803-0281
Fly-Lo
1803-0282
Low-Rider
SEATS &
SISSY BARS
1803-0283
1803-0284
EXHAUST
WIDTH
30.5”
30.5”
29.5”
RISE
9.5”
7.5”
12”
PULLBACK
8.5”
8”
12.25”
SUG. RETAIL
$239.95
239.95
235.95
PART #
1803-0283
1803-0284
DESCRIPTION
Ram-Hi
Ram-Lo
WIDTH
30.25”
30.25”
RISE
12.5”
10.75”
PULLBACK
10.25”
11.5”
SUG. RETAIL
$235.95
235.95
DS-300009
DS-300009
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
1” FAT BOB-STYLE DRAG BARS
•Top-quality Fat Bob-style drag bars with 31/2”
bolt centers and 1/2”-20 threads
•Gas-tank-to-bar clearance should always
be checked
PART #
DESCRIPTION
WIDTH
FOR STOCK XL, FX FRONT ENDS OR CUSTOM SPRINGERS W/ 31/2”
DS-300009
Dimpled
25.25”
DS-300001
Drilled/dimpled
25.5”
GASKETS
& SEALS
RISE
BOLT CENTER
8.5”
8.5”
PULLBACK
SUG. RETAIL
10.5”
10.25”
ELECTRICAL
$149.95
141.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
0601-1054
CUSTOM 1”
HANDLEBARS
CABLES
•Wild designs from
the mind of Paul Yaffe
•Custom bends so you
get the fit you want
•All bars are designed to fit triple trees with
31/2” on-center mounting holes
0601-1055
BRAKES
NOTE: PART # 0601-1055 is not dimpled or drilled.
PART #
DESCRIPTION
0601-1054
Chrome Bagger Ape Hangers (except 08-09 Dressers)
0601-1055
Primer Bobber Monkey Bars
END-RISE
12”
11”
WIDTH
33”
34”
CENTER WIDTH
163/4”
11”
PULLBACK
53/8”
5”
SUG. RETAIL
$229.95
199.95
DASHES
& GAUGES
1” HANDLEBARS
•Chrome-plated
•For use with straight risers only
PART #
DESCRIPTION
0601-0194 Whiskey bars w/ small bend; 51/2” pullback x 29” wide
0601-0195 Prison Bars bars w/o small bend; 71/2” pullback x 271/2” wide
TANKS &
OIL FILTERS
0601-0195
SUG. RETAIL
$140.95
140.95
0601-0194
FOOTRESTS
& LICENSE
PLATE FRAMES
11/4” BIG JOHNSON FL HANDLEBAR
•Improves the rider’s overall body position
•Provides a more comfortable ride, is easier to steer and
makes the bike feel 200 lbs. lighter
•Will work with all stock cables, lines and controls
•Is a direct replacement for stock bars with a 1” riser clamp diameter
•Reduced reach and improved back position is provided by the 13” pullback
•A lower grip point helps relax the shoulders for added comfort
•An improved bar length helps increase the leverage which makes the bike easier to steer
•Reduced or eliminated hand numbness comes from the realigned wrist position
•Dimpled for late-model controls
•Works with FL fairings and electronic throttle control
•Will not interfere with stock mirrors
•Diamond-knurled for OEM risers on 31/2” centers to prevent slippage
PART #
DESCRIPTION
•Width 38”, rise 5”, pullback 13”
0601-1033
FLT, FLHT, FLHR, FLHX, FLTR and FLST models
FRAMES,
SUSPENSION
& FENDERS
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$199.95
COVERS,
SECURITY
& GENERAL
729
SECTION
12
DS-290651
DS-290652
WINDSHIELDS
Buffalo clamp
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
DS-290653
DS-290654
Standard clamp
BUFFALO HANDLEBAR CLAMPS
•Billet aluminum construction with a chrome finish
•Covers the entire clamping area of 11/4” handlebars that are sized down to 1”; can also be used on 1” handlebars
•For use with 31/2” on center risers with offset holes
•Available in a smooth or ball-milled design, with or without hidden mounting bolts
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
DS-290651
Smooth
$63.95 DS-290653
Smooth w/ hidden screws
DS-290652
Ball-milled
63.95 DS-290654
Ball-milled w/ hidden screws
SUG. RETAIL
$82.95
84.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
HANDLEBAR
CLAMP WITH LED
HANDLEBAR CLAMP SETS
•Billet aluminum with
a chrome-finish
handlebar clamp
•Features LED indicator
lights for a true custom look
•Fits 74-09 models with 31/2” center-to-center risers with
offset mounting holes
PART #
DESCRIPTION
SUG. RETAIL
1908-0030
1” handlebar clamp w/ LED
$241.95
•Fits under the stock cover
•Includes all necessary installation hardware
0602-0184
•Raw finish
PART #
DESCRIPTION
FOR 94-09 FLHR
0602-0212
For 11/4” handlebars w/ 11/4” dia. clamping area
0602-0184
For 11/2” handlebars w/ 11/2” dia. clamping area
SUG. RETAIL
$118.95
118.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
0603-0196
CABLES
HANDLEBAR CLAMPS
HANDLEBAR CLAMP
BRAKES
TANKS &
OIL FILTERS
•One-piece top clamp
•Provides better support for stock
and aftermarket handlebars
•Chrome-plated finish
•Fit 1” handlebars
PART #
DESCRIPTION
0603-0200
For 00-07 FXSTD
SUG. RETAIL
$59.95
•CNC machined from billet aluminum
•Covers the entire clamping area
0603-0197
PART #
DESCRIPTION
SUG. RETAIL
FOR MOST 74-09 MODELS WITH 31/2” ON-CENTER RISERS AND OFFSET MOUNTING HOLES
0603-0196
Finned, black
$99.95
0603-0197
Finned, chrome
99.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
ELITE TWO-PIECE
HANDLEBAR CLAMP
HANDLEBAR RISER/
TOP CLAMP KIT
•Machined from billet aluminum
with a black powder-coat finish
•Fit any handlebars that have
a 1” diameter in the clamping area
•Sold as a kit of two risers, top clamp and hardware
PART #
DESCRIPTION
0602-0256
Black 1.5” tall risers w/ top triple clamp (set)
DS-290603
730
SUG. RETAIL
$146.95
CHROME HANDLEBAR CLAMPS WITH SKIRT
•Chrome, die-cast clamp has a skirt design to cover the underside
of the clamp when using our pullback and FXWG-style risers
•Designed to work on 1” bars
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
SUG. RETAIL
$139.95
•Chrome-plated 6061 T-6
billet aluminum
•Features a smooth top,
hidden bolt design
•Cutout in the lower portion
allows wires to be routed inside the handlebars
•For triple trees that have 31/2” on-center riser holes
PART #
DESCRIPTION
DS-290012
1” handlebar clamp
0603-0003
NOTE: Not for models with gauge mount indicator light attached to the handlebar clamp.
PART #
DESCRIPTION
SUG. RETAIL
FOR MOST 74-09 MODELS WITH 31/2” ON-CENTER RISERS AND OFFSET MOUNTING HOLES
0603-0003
Finned
$15.95
DS-290603
Smooth
13.95
SECTION
T-BAR WIRE
SHROUD
3-D WIRE COVERS
•Chrome-plated billet aluminum construction
•Hides unsightly wire harness and
the beveled edge at the bottom of the
risers on most 11/4” and 11/2” T-bars
PART #
0605-0003
0605-0004
0605-0003
DESCRIPTION
For 11/2” bars
For 11/4” bars
SUG. RETAIL
$159.95
159.95
TOURING
1803-1033
DESCRIPTION
Fits 1” bars
Fits 11/4” bars
Fits 11/2” bars
WARRIOR HANDLEBAR RISER END CAPS
SUG. RETAIL
$71.95
71.95
71.95
LUGGAGE
SEATS &
SISSY BARS
1803-6111
•Sculpted from billet T-6 aluminum with a chrome finish
•Designed to fit between top triple tree and the end of the riser
•Fit most round risers and bars with attached risers
(1/2” mounting holes)
•Sold in pairs
PART #
1803-6111
2120-0148
1803-6112
WINDSHIELDS
•Chrome-plated CNCmachined 6061 T-6 billet aluminum
•Fits between the riser portion of the bars
and conceals wires
•For use on T-bars with 31/2”
center-to-center risers
PART #
1803-1011
1803-1022
1803-1033
12
EXHAUST
DESCRIPTION
End caps for 1” bars, chrome
End caps for 1” bars, black
End caps for 11/4” bars, chrome
SUG. RETAIL
$65.95
58.95
65.95
FUEL/AIR
SYSTEMS
2120-0148
ENGINE
0602-0190
0602-0023
TRANSMISSION
& DRIVELINE
0602-0200
0602-0197
CUSTOM RISER EXTENSIONS
•Use with most bars and risers to clear tanks and gauges
•CNC-machined billet aluminum
•Chrome-plated or black finish
•Sold in pairs
PART #
DESCRIPTION
FOR 1” BARS
1/2” extension, smooth chrome
0602-0023
1/2” extension, smooth black
0602-0190
0602-0024
1” extension, smooth chrome
0602-0191
1” extension, smooth black
0602-0196
1” extension, vertical-milled chrome
0602-0200
1” extension, vertical-milled black
0602-0108
0602-0192
0602-0197
11/2” extension, vertical-milled chrome
0602-0201
11/2” extension, vertical-milled black
GASKETS
& SEALS
0602-0108
SUG. RETAIL
$58.95
58.95
63.95
63.95
63.95
63.95
68.95
69.95
73.95
73.95
0602-0192
PART #
FOR 11/4” BARS
0602-0025
0602-0193
0602-0026
0602-0194
0602-0198
0602-0202
0602-0109
0602-0195
0602-0199
0602-0203
0602-0201
DESCRIPTION
SUG. RETAIL
1/2”
extension, smooth chrome
extension, smooth black
1” extension, smooth chrome
1” extension, smooth black
1” extension, vertical-milled chrome
1” extension, vertical-milled black
11/2” extension, vertical-milled chrome
11/2” extension, vertical-milled black
$58.95
58.95
63.95
63.95
63.95
63.95
69.95
69.95
73.95
73.95
1/2”
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
HANDLEBAR ADAPTER KIT
•Fills the recesses on the FXSTD upper triple trees
•Allows mounting of custom risers or handlebars with built-in risers
•Sold in pairs
PART #
0602-0213
ELECTRICAL
DESCRIPTION
For 00-07 FXSTD
BRAKES
SUG. RETAIL
$29.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
DEUCE HANDLEBAR
ADAPTER KIT
RISER INSERTS
•Machined T-6 aluminum
•Used when changing risers
•Fit the base of most risers and fills the
gap in the upper triple tree
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
DS-289290 For 00-07
FXTSD models
$7.95
•Custom inserts for the top triple tree
•Standardizes Deuce front end to accept Wild 1 Chubby
bars, Chubby risers and all risers and bars made for
standard glide front ends
•Precision machined from steel, then
show-chrome plated
PART #
0602-0097
DESCRIPTION
Deuce handlebar adapter kit
SUG. RETAIL
$34.95
HANDLEBAR RISER ADAPTERS
•Chrome billet aluminum
•Fills the gap in the upper triple tree
•Allows for the use of standard risers or tee bars
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0602-0033 For 00-07 FXSTD models
$35.95
PART #
11/2” DIAMETER IN CLAMPING AREA
DS-300260
DS-300261
DS-300262
DESCRIPTION
Smooth two-piece
Smooth one-piece
Road King
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HANDLEBAR RISERS
•Smooth chrome billet risers available as a one- or two-piece
design or Road King design
•Road King risers come with bushings and are designed to fit under the OEM handlebar cover
•11/2” tall and are drilled and tapped for 1/2” -13 bolts (sold separately)
•Sold in pairs
FRAMES,
SUSPENSION
& FENDERS
SUG. RETAIL
HARDWARE,
CHEMICALS
& TOOLS
$192.95
209.95
204.95
COVERS,
SECURITY
& GENERAL
DS-300261
DS-300260
DS-300262
731
SECTION
12
HANDLEBAR MOUNT FOR TAPERED
MOTOCROSS-STYLE HANDLEBARS
WINDSHIELDS
•Enable you to adapt tapered motocross-style bars – 11/8” center
diameter to 7/8” diameter grip area – to any Harley-Davidson top
triple clamps (except Springers)
•CNC-machined from 6061 T-6 billet aluminum, then anodized clear
on the top and hard black on the bottom
•Aircraft-style gold tone clamp bolts make for a trick look
•Mounting bolt spacing is 31/2” on-center
•Base sections have an offset 1/2”-13 thread to enable forward or backward mounting
•Use with tapered motocross-style bars requires 7/8” to 1” adapter sleeves for use
with 1” hand controls
0603-0240
TOURING
LUGGAGE
SEATS &
SISSY BARS
0632-0336
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
PART #
DESCRIPTION
0603-0240 Handlebar mount for 11/8” tapered motocross handlebars
0632-0336 7/8” to 1” adapters for throttle and switch assemblies (pr.)
0603-0002
HANDLEBAR RISER CLAMPS
CHROME HANDLEBAR CLAMPS
•Impressively chromed handlebar clamps
•Fit 1” bars
NOTE: Not for models with gauge mount
indicator light mount attached to the
handlebar clamp.
DS-290600
PART #
DESCRIPTION
FOR MOST 74-09 MODELS WITH 31/2” ON-CENTER RISERS
AND OFFSET MOUNTING HOLES
0603-0002
Scalloped
DS-290600
Smooth
GASKETS
& SEALS
SUG. RETAIL
1603-0069
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
CRUSADER CROSS HANDELBAR CLAMPS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
732
SUG. RETAIL
$27.95
0603-0168
0603-0169
DESCRIPTION
T-bar clamp
Mounting kit
SUG. RETAIL
$220.95
42.95
•Chrome billet aluminum construction
•Choice of exposed or hidden bolts
PART #
DESCRIPTION
FOR MOST 74-09 MODELS WITH 31/2” ON-CENTER RISERS
AND OFFSET MOUNTING HOLES
1603-0068
W/ exposed bolts
1603-0069
W/ hidden bolts
SUG. RETAIL
$67.95
92.95
0603-0164
0603-0163
DS-290602
NACELLE KIT FOR ROAD KING
•Machined from high-quality billet aluminum,
then chrome plated
•Allows the use of 11/4” and 11/2” fat bars or
risers on the Road King
•Really cleans up the top of headlight nacelle
•Kit consists of the nacelle plate, headlight seam
spear and fork lock adapter
PART #
DESCRIPTION
SUG. RETAIL
FOR 94-09 FLHR
DS-290602 11/4” billet nacelle kit
$254.95
0602-0050
11/2” billet nacelle kit
253.95
0409-0007
“COVER UP” HANDLEBAR
COVER ELIMINATOR
•Chrome billet aluminum construction
•Covers the gap on the FLST nacelle when
installing T-bars or tall fat risers
•Sizes to fit 11/4” and 11/2” T-bars/risers
PART #
DESCRIPTION
FOR 86-06 FLST MODELS (EXCEPT FLSTS)
0409-0006
11/4” cover
0409-0007
11/2” cover
0603-0166
0603-0165
BILLET TOP HANDLEBAR CLAMPS
•Precision machined from billet aluminum with
a brilliant show-chrome finish
•Works with stock risers and all 1” handlebars, as well
as Wild 1 Chubby Risers, Wild 1 Chubby Bars and other custom bars
•Fits on all models with 3.5” center-to-center riser spacing and offset
mounting holes
•Mounting hardware included with hidden hardware style
•PART #0603-0167 replaces separate top clamps with full clamp
on Deuce risers
PART #
0603-0163
0603-0164
0603-0165
0603-0166
0603-0167
0409-0006
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
•Steel construction
with a chrome finish
•Allows mounting of
most handlebars or
risers with standard
31/2” bolt centers
•Fits most Springer top trees with
43/4” hole centers
•Must use with Mount Kit
PART #0603-0169
PART #
0603-0168
0603-0169
1603-0068
HANDLEBARS,
CONTROLS
& MIRRORS
•Chrome two-piece design clamps
for 1” bars
•Fit most standard risers
•Sold in pairs
PART #
DESCRIPTION
1803-7506 Chrome handlebar clamps; repl. OEM #56057-00
T-BAR CLAMP
$15.95
13.95
ELECTRICAL
LIGHTING
SUG. RETAIL
$149.95
18.95
DESCRIPTION
Smooth w/ exposed mounting bolts
Ball-milled w/ exposed mounting bolts
Smooth w/ hidden mounting bolts
Ball-milled w/ hidden mounting bolts
Smooth for Deuce-style risers
SUG. RETAIL
$59.95
59.95
96.95
96.95
64.95
CHROME PLUGS FOR
HANDLEBAR CLAMPS
SUG. RETAIL
$69.95
69.95
•Plugs fit any socket-head
screw with 1/4” hex
•Sold each to consumer;
sold to dealer in packs of 12 or 24
PART #
DS-290605
DS-290606
DESCRIPTION
12-pk.
24-pk.
SUG. RETAIL
$.95 (ea.)
.95 (ea.)
SECTION
12
DS-290130
WINDSHIELDS
DS-290135
DS-290133
0602-0124
0602-0167
TOURING
•Impressively chromed, die-cast short
risers for several stock applications
•Popular on custom bikes with 1” Ape Hanger handlebars; sold in pairs
HANDLEBAR
RISERS
•Chrome-billet risers
with style
•Available in diamond and piston styles
•11/2” tall and are drilled and tapped for 1/2”-13 bolts
(sold separately)
•Sold in pairs
PART #
DESCRIPTION
1” DIAMETER IN CLAMPING AREA
0602-0165
Piston
0602-0166
Piston
0602-0124
Diamond
0602-0167
Piston
DS-290134
CHROME STRAIGHT RISERS
SUG. RETAIL
$199.95
199.95
149.95
SUG.
RETAIL
PART #
DESCRIPTION
DS-290133 2” risers for 74-83 FX, FXR and XL 1/2” through-bolt design;
accepts handlebar clamp w/ skirt; repl. OEM #s 56116-77 and 56117-77
DS-290134 2” risers for 74-83 FX, FXR and XL, tapped for 1/2”-13 mount bolts;
accepts handlebar clamp w/ skirt; repl. OEM #s 56116-77 and 56117-77
DS-290135 1.7” risers for L77-84 FL, 1/2” through-bolt design; won’t accept
handlebar clamp w/ skirt; repl. OEM #s 59940-79 and 59941-79
DS-290130 3.75” risers for 74-09 XL (except 883L/1200L XL Custom) and FX,
82-94 FXR, FXRS and FXRT, 80-86 FXWG, 84-09 FXST and 93-05 FXDWG
0602-0120
Top view
LUGGAGE
$25.95
25.95
22.95
39.95
SEATS &
SISSY BARS
EXHAUST
0603-0237
0602-0180
199.95
FUEL/AIR
SYSTEMS
0602-0172
0603-0238
ENGINE
0602-0120
0602-0176
DS-290126
TRANSMISSION
& DRIVELINE
0602-0168
DS-290125
1803-6025
CUSTOM PULLBACK RISERS
FOR 1” HANDLEBARS
GASKETS
& SEALS
0603-0239
HEFTY RISERS FOR 11/4” HANDLEBARS
•Brilliantly chromed risers are made of die-cast metal
•Elliptical stem design replaces the stock risers
•Drilled and tapped for 1/2”-13 mounting bolts
•Stock upper handlebar clamp can be used
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
FOR 74-09 XL (EXCEPT CUSTOMS 883L/1200L)
AND FX; 82-94 FXR, FXRS AND FXRT; 80-86 FXWG;
84-09 FXST AND 93-05 FXDWG MODELS
DS-290126
2.5”
$49.95
DS-290125
4”
39.95
1803-6027
5.5”
52.95
1803-6025
6.5”
52.95
•Allow you to install LA Choppers handlebars or other handlebars
with a 11/4” diameter clamping area
•Bright chrome finish
•Threads are 1/2” -13
•Include riser clamps
•Sold in pairs
SUG.
PART #
RISERS
0602-0120
0602-0168
0602-0172
0602-0176
0602-0180
DESCRIPTION
RETAIL
11/2” risers
3” risers
4” risers
5.5” pullback risers
6” risers
$118.95
137.95
142.95
173.95
153.95
ELECTRICAL
PART #
DESCRIPTION
OPTIONAL CAPS/CLAMPS
0603-0237 Mohawk riser caps (pr.)
0603-0238 Drilled riser caps (pr.)
0603-0239 Solid top triple
clamp (ea.)
SUG.
RETAIL
LIGHTING
$64.95
64.95
HANDLEBARS,
CONTROLS
& MIRRORS
64.95
CABLES
DS-290113
0602-0157
BRAKES
DS-290113
1803-1509
1803-1511
0602-0068
DS-290111
TANKS &
OIL FILTERS
DASHES
& GAUGES
0602-0161
FRAMES,
SUSPENSION
& FENDERS
0603-0198
11/2” BIG
BUFFALO RISERS
FOOTRESTS
& LICENSE
PLATE FRAMES
1803-1512
•Risers are machined from
billet aluminum
•Brilliant show-chrome finish
•For use with Drag Specialties 11/2” Big Buffalo bars or
other bars with a 11/2” diameter clamping area
•Use 1/2”-13 riser bolts, available separately
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
$116.95
1803-1509 11/2” tall
0602-0150 3” tall
134.95
0602-0068 4” tall
139.95
0602-0157 51/2” tall (w/ pullback)
169.95
0602-0161 6” tall
149.95
0603-0198 Optional one-piece top clamp
74.95
DS-290112
11/4” BUFFALO RISERS
•Chrome-plated risers are machined from billet aluminum
•Fit any handlebars that have a 1” diameter in the clamping area
•11/4” diameter match 11/4” handlebars
•Accepts Buffalo handlebar clamps or OEM-style handlebar clamps
•Pullback risers have 1” of pullback
•All risers use 1/2”-13 riser bolts, available separately
PART #
DESCRIPTION
STRAIGHT RISERS
DS-290113
11/2” tall
1803-1511
3” tall
DS-290111
41/2” tall
1803-1512
6” tall
SUG. RETAIL
$82.95
99.95
106.95
109.95
1803-1513
PART #
DESCRIPTION
PULLBACK RISERS
DS-290112
51/2” tall
1803-1513
9” tall
SUG. RETAIL
$129.95
184.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
733
SECTION
12
DS-290221
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
DS-290220
HANDLEBAR RISERS
•Chrome-plated risers are fully
machined from
forged aluminum
•Available in a smooth-head or
socket-head style
•For use with 1” bars; accepts
1/2”-20 bolts
•Sold in pairs
PART #
SOCKET-HEAD RISERS
DS-290220
DS-290221
DS-290222
SMOOTH RISERS
DS-290223
DS-290224
DS-290222
DS-290223
DS-290224
DESCRIPTION
SUG. RETAIL
DEUCE-STYLE RISERS
3”
4”
6”
$74.95
74.95
74.95
4”
6”
74.95
74.95
DS-243584
DS-243964
ENGINE
0602-0047
TRANSMISSION
& DRIVELINE
DS-243578
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
DS-243594
CUSTOM RISERS
•Chrome billet aluminum risers feature the unique concept of a removable
cover that hides the upper handlebar clamp bolts
•Risers for standard triple trees are drilled and tapped for 1/2”-13 mounting
bolts; risers for FXSTS triple trees accept stock riser studs and nuts
•Include handlebar clamp bolts
•For use with handlebars with a 1” diameter in the clamping area
•Sold in pairs; made in the U.S.A.
PART #
DESCRIPTION
FOR STANDARD TRIPLE TREES
DS-243964
6” pullback, 31/2” offset
1803-1357
7” pullback, 23/4” offset
DS-243578
2”
DS-243579
4”
DS-243594
6”
DS-243584
8”
FOR FXSTS TRIPLE TREES
DS-290151
4”
DS-290152
6”
DS-290153
8”
$287.95
287.95
201.95
201.95
201.95
212.95
201.95
201.95
212.95
1803-1040
FOOTRESTS HANDLEBAR RISERS
& LICENSE WITH CLAMP
PLATE FRAMES •Billet construction with a
734
SUG. RETAIL
risers feature a removable
cover that hides the upper handlebar clamp bolts
•Risers are drilled and tapped for 1/2”-13
mounting bolts; handlebar clamp bolts
are included
•For use with handlebars with 1” diameter in
clamping area
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
STRAIGHT RISERS
0602-0048
4”
$201.95
0602-0047
6”
201.95
0602-0049
8”
212.95
PULL BACK RISERS
0602-0071
6”
298.95
0602-0070
7”
298.95
0602-0034
FRAMES,
SUSPENSION
& FENDERS
COVERS,
SECURITY
& GENERAL
GOTHIC RISERS
1803-1034
DASHES
& GAUGES
HARDWARE,
CHEMICALS
& TOOLS
0602-0070
DS-243579
TANKS &
OIL FILTERS
TIRES,
TUBES &
WHEELS
•Risers are 5.5” tall with 3.5”
of pull-back
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
1803-3306 For 00-07 FXSTD models;
repl. OEM #56033-00
$69.95
1803-1035
COUNTER-BORED
HANDLEBAR RISERS
chrome finish
•2.1” height for 1” handlebars
•Drilled and tapped for 1/2”-13 bolts
•Choice of a one-piece riser clamp or
a two-piece riser clamp
•Two-piece clamp is available in a
round or a pointed design; onepiece clamp has a round design
PART #
DESCRIPTION
1803-1040
Two-piece round-top clamp
1803-1034
Two-piece pointed-top clamp
1803-1035
One-piece round-top clamp
SUG. RETAIL
$159.95
159.95
195.95
0602-0036
•CNC-machined from billet aluminum
•Feature counter-bored sides to fit 11/4”
diameter handlebars
•Hidden set screws lock down the angle of the handlebars
•2.1” tall
•Drilled and tapped for 1/2”-13 bolts
PART #
DESCRIPTION
SUG. RETAIL
FOR 11/4” HANDLEBARS WITH 1” CLAMPING AREA
0602-0034 W/ round custom top clamps
$159.95
0602-0036 W/ one-piece 3-D custom clamp
1
195.95
(for 3 /2” center-to-center riser mount)
SECTION
12
WINDSHIELDS
TOURING
0602-0270
0602-0272
0602-0089
LUGGAGE
SEATS &
SISSY BARS
DEAD END 1.5” RISERS
•Machined from billet aluminum with a chrome finish
•Fits 1” handlebars
•Top covers hide clamp bolts
•Smooth styles include an extra set of pointed top covers
•Risers for standard triple trees are tapped
for 1/2-13 bolts (not included)
•Risers for Springers are counter bored to bolt directly to
fork (hardware not included)
DS-290168
DS-290165
CHROME BILLET HIDDEN BOLT RISERS
•Unique concave design with a top cover hides the handlebar clamp bolts
•Available with a Smooth or Joker top cover
•For 1” handlebars
•Requires two 1/2”-13 bolts (must be purchased separately)
SUG.
RETAIL
PART #
DESCRIPTION
SMOOTH RISERS FOR
STANDARD TRIPLE TREES
0602-0090 2”
$159.95
DS-290166 4”
159.95
DS-290168 6”
164.95
DS-290170 8”
169.95
SMOOTH RISERS FOR AFTERMARKET
SPRINGER TRIPLE TREES
(NOT OEM SPRINGERS)
0602-0088 2”
159.95
PART #
FOR STANDARD TRIPLE TREES
0602-0271
0602-0273
FOR FXSTS TRIPLE TREES
0602-0270
0602-0272
EXHAUST
DESCRIPTION
SUG. RETAIL
Notched
Smooth
$214.95
214.95
Notched
Smooth
214.95
214.95
0602-0262
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
0602-0260
RISERS FOR 1” HANDLEBARS
•Laser-engraved RSD logo on top riser cap
•Drilled and tapped for 1/2”-13 mounting bolts (not included)
•Three height options available
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
1
1 /2” RISERS
0602-0259 Chrome
$169.95
0602-0262 Black anodized 159.95
3” RISERS
0602-0260 Chrome
179.95
CABLES
SUG.
PART #
DESCRIPTION
RETAIL
3” RISERS (CONT)
0602-0263 Black anodized $169.95
5” RISERS
0602-0261 Chrome
189.95
0602-0264 Black anodized 179.95
DS-290276
0602-0255
0602-0250
0602-0252
0602-0127
•Gain a clean, custom look
•Polished 6061 aluminum with choice
of WCC or FTW engraved logo
•Feature hidden upper hardware for a seamless look
•Risers are 2” diameter at their thickest point
and available in three heights: 2”, 4” and 6”
•Fit 1” handlebars and tapped for 1/2-20 bolts (sold separately)
TANKS &
OIL FILTERS
DASHES
& GAUGES
FOOTRESTS
& LICENSE
PLATE FRAMES
GLIDE STYLE RISERS
NOTE: Does not fit stock HD Springers.
DESCRIPTION
BRAKES
FRAMES,
SUSPENSION
& FENDERS
HANDLEBAR RISERS
PART #
2” RISERS
0602-0250
0602-0251
4” RISERS
0602-0252
0602-0253
6” RISERS
0602-0254
0602-0255
ENGINE
TRANSMISSION
& DRIVELINE
SUG.
RETAIL
PART #
DESCRIPTION
JOKER RISERS FOR
STANDARD TRIPLE TREES
0602-0089 2”
$159.95
DS-290165 4”
159.95
DS-290167 6”
164.95
DS-290169 8”
169.95
JOKER RISERS FOR AFTERMARKET
SPRINGER TRIPLE TREES
(NOT OEM SPRINGERS)
0602-0087 2”
159.95
FUEL/AIR
SYSTEMS
SUG. RETAIL
WCC logo
FTW logo
$199.95
199.95
WCC logo
FTW logo
274.95
274.95
WCC logo
FTW logo
349.95
349.95
•Manufactured from 6061 T-6 aluminum and chrome plated
•Available for 1” diameter bars or 11/4” diameter bars which
have a 11/4” diameter in the clamping area
•Require 1/2”-13 mounting bolts
•Made in the U.S.A.; sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL PART #
DESCRIPTION
1” BARS
11/4” BARS
DS-290275 2” risers
$147.95 0602-0127 4” risers
153.95 0602-0128 6” risers
161.95
171.95
TIRES,
TUBES &
WHEELS
SUG.
RETAIL
$177.95
191.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
735
SECTION
12
0602-0029
WINDSHIELDS
TOURING
0602-0030
0602-0142
LUGGAGE
0602-0031
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
0602-0032
0602-0143
HANDLEBAR
RISERS
0602-0146
•Bolts through from the top
•For use with 1” handlebars
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
1.5” RISERS
0602-0141 Black
$159.95
0602-0142 Chrome
159.95
3” RISERS
0602-0143 Black
164.95
GASKETS
& SEALS
POLISHED
BILLET RISERS
PART #
DESCRIPTION
3” RISERS (CONT)
0602-0144 Chrome
6” RISERS
0602-0145 Black
0602-0146 Chrome
SUG.
RETAIL
$164.95
179.95
179.95
•CNC-machined billet six-gun handlebar risers
•Available in .44 magnum style
•1/2”-20 threads
•For 1” handlebars only
SUG.
PART #
DESCRIPTION
RETAIL PART #
DESCRIPTION
0602-0029 4” (FXSTS only) $285.95 0602-0031 6”
0602-0030 4”
261.95 0602-0032 8”
0602-0076
SUG.
RETAIL
$261.95
261.95
0602-0209
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
MALTESE CROSS
CHUNKY RISERS
•Billet risers available in 3”, 6” and 9” rise
for 1” and 1.25” handlebars
•Feature Maltese Cross designs with
three-piece blind bolted tops
•Risers for 11/4” handlebars are for use
with handlebars that have a 11/4” diameter in the clamping area
PART #
DESCRIPTION
FOR 1” HANDLEBARS
0602-0072 3”
0602-0073 6”
0602-0074 9”
SUG.
RETAIL
$364.95
364.95
364.95
PART #
DESCRIPTION
FOR 1.25” HANDLEBARS
0602-0075 3”
0602-0076 6”
0602-0077 9”
LPHBR-4
EURO-STYLE RISERS
•Steel construction with chrome or black finish
•For 1” handlebars in 3”, 4” or 5” rise;
with 1.5” pullback
•Drilled and tapped for 1/2”-13 mounting bolts
SUG.
RETAIL
$364.95
364.95
364.95
PART #
CHROME
LPHBR-3
LPHBR-4
LPHBR-5
SUG.
RETAIL
DESCRIPTION
3” risers
4” risers
5” risers
$116.95
119.95
124.95
PART #
BLACK
0602-0209
0602-0210
0602-0211
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
736
3” risers
4” risers
5” risers
SUG.
RETAIL
$116.95
119.95
124.95
0602-0096
TANKS &
OIL FILTERS
DASHES
& GAUGES
DESCRIPTION
CHUBBY® 11/4”BILLET RISERS
•Precision machined from billet aluminum,
then show chromed
0602-0091
•Blind hole tapped for standard 1/2” x 13 mounting bolts
•Fit on all models with 3.5” center-to-center riser spacing
•Work with any standard 1” handlebar, Wild 1 Chubby Bars
and most other bars
•Use stock top clamp, after-market top clamp, or Wild 1
custom billet top clamps
PART #
0602-0091
0602-0095
0602-0092
DESCRIPTION
1.5” riser set
3.5” riser set
4.5” riser set
0602-0092
0602-0095
SUG. RETAIL
$74.95
94.95
94.95
0602-0094
0602-0093
PART #
0602-0094
0602-0093
0602-0096
DESCRIPTION
6” riser set
5.5” pullback riser set
9.5” pullback riser set
SUG. RETAIL
$97.95
139.95
184.95
DELISLE 3-D HANDLEBAR CLAMPS
•3-D machined from billet aluminum
•Unique machined raw finish
•Feature a 3/4” rise and are drilled
for 1/2”-13 riser bolts
•For use with 1” handlebars
•Sold in pairs
PART #
DESCRIPTION
0603-0171
Delisle 3-D handlebar clamps
SUG. RETAIL
$137.95
SECTION
12
DS-290273
WINDSHIELDS
TOURING
LUGGAGE
0602-0106
SEATS &
SISSY BARS
0602-0105
CHROME DAWGBONE
STYLE RISERS
CHROME DAWGBONE
RISERS FOR SPRINGERS
OFFSET POST
STYLE RISERS
•2” offset risers
•Made from top-grade machined
steel and triple chrome plated
•Fits 1” bars
•Mounted on rubber for
maximum comfort
PART #
DESCRIPTION
0602-0105
5” offset
0602-0106
7” offset
SUG. RETAIL
$199.95
216.95
•Bases are high
grade steel round stock;
handlebar clamps are machined
6061 T-6 aluminum
•Risers have 5/8”-18 studs, built-in
rubber isolation dampers, a 2”
offset and measure about 6” tall
•Give 88-07 Springer models a real look
of nostalgia
•For 1” diameter handlebars
PART #
DESCRIPTION
SUG. RETAIL
DS-290270
Dawgbone risers (pr.)
$296.95
EXHAUST
•Base is high grade steel round
stock; handlebar clamps are
machined 6061 T-6 aluminum
•Built-in rubber isolation
dampers with a 2” offset
•Require 1/2”-13 mounting bolts,
designed for 1” diameter handlebars
•It is recommended that a solid riser bushing kit
PART # DS-290269 be used with these risers
PART #
DESCRIPTION
SUG. RETAIL
DS-290271
2”
$234.95
DS-290272
4”
242.95
DS-290273
6”
273.95
DS-290274
8”
283.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DS-222055
HANDLEBAR
DAMPER KITS FOR
LATE MODEL H-D
DS-222053
•Faithful reproduction of the late-style handlebar damper kits
•Includes two studs, two rubber damper sets and four zinc-plated
cup washers
PART #
DESCRIPTION
SUG. RETAIL
DS-222054
Handlebar damper kit for L84-85 FXRS, FXRT;
85 FXSB, FXEF; 86-94 FXR, FXRS, FXRS-SP,
FXRS-Con; L84-03 XL; repl. OEM #s 56105-84,
56158-73 and 56159-73
$16.95
DS-222053
Handlebar damper kit for 84-09 FLHT, FLHTC,
FLHTC-U and FLHS; repl. OEM #s 56137-84A,
56159-73 and 56161-83A
16.95
DS-222059
Repl. chrome washers only (4-pk.)
7.95
0604-0001
HANDLEBAR DAMPER KIT
FOR EARLY MODEL H-D
•Replacement damper kit includes one pair of
dampers and four chrome cup washers
•Meets or exceeds OEM specifications
PART #
DS-222055
DS-222059
DESCRIPTION
For 84-85 FXST, 80-86 FXWG, 73-84 XL,
73-84 FX/FL and 82-85 FXR models; repl.
OEM #s 56153-73, 56158-73 and 56159-73
Repl. chrome washers only (4-pk.)
$30.95
30.95
BRAKES
$12.95
7.95
DASHES
& GAUGES
RISER BUSHING
•Top-quality bushings replace worn-out or cracked
stock riser bushings
•Reduces handlebar vibrations
•Sold individually
PART #
DESCRIPTION
DS-290575
For 49-72 FL, 54-72 XL and
71-72 FX; repl. OEM #56158-49
•Helps eliminate flexing when using
heavy or high handlebars
•Four-piece kits include dampers that
are made of extra-strong polyurethane
•Inserts over billet CNC milled
aluminum washers
PART #
DS-300264
DESCRIPTION
Bushing set
SUG. RETAIL
$17.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
EXTREME-DUTY
BUSHING SET
SUG. RETAIL
SUG. RETAIL
TANKS &
OIL FILTERS
HEAVY-DUTY HANDLEBAR
RISER BUSHINGS
•Made from a new space-age
polyurethane material
•Eliminate sloppiness in
handlebar and isolate vibration
•Sold in sets of four
PART #
DESCRIPTION
FOR 86-09 FXST, FLST (EXCEPT FXSTD, 04-09 XL),
91-09 FXD, 86-94 FXR AND 86-03 XL MODELS
0604-0001
Heavy-duty handlebar riser bushings
FOR 83-09 FLT, FLHT MODELS
0604-0002
Heavy-duty handlebar riser bushings
CABLES
SUG. RETAIL
$37.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
737
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
POLYURETHANE
RISER BUSHING KIT
•Adds a more positive feel to handlebars
•Limits vibrations
•Kit contains high-quality bushings,
chrome handlebar retainer washers and
steel inner sleeves
PART #
DESCRIPTION
DS-290571
For 73-09 models w/ unthreaded risers
(except 04-09 XL)
SUG. RETAIL
$31.95
EXHAUST
GOODEN TIGHT™ RISER BUSHING KITS
•Revolutionary design reduces vibration better than
any other riser bushing on the market
•Available for a wide variety of H-D models
•Sold in sets of four
U.S. Patent #6,547,269.
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
PART #
0602-0005
DESCRIPTION
73-09 FXST, FLST, DYNA, FXR, FX and XL
(except FXSTD and 04-09 XL)
83-09 FLT, FLHT
POLYURETHANE
RISER BUSHINGS
0602-0006
•Gets rid of the sloppy feel you
get from the soft OEM
or worn-out rubber bushings
•Black poly bushings are 28%
stiffer for better control and they still provide exceptional
vibration absorption
•Sold in 4-pk.
BILLET HANDLEBAR
RISER BUSHING KIT
PART #
0602-0067
DS-290573
DESCRIPTION
For most 73-09 Softail, FX, FXR, Dyna and XL
models (except 04-09 XL); repl. OEM #s
53156-86 and 56158-73
For 84-09 FLT/HT models; repl. OEM #56161-83A
SUG. RETAIL
$10.95
10.95
•Chrome billet
aluminum construction
•Solid bushings eliminate
that sloppy, spongy feel
in your handlebars
PART #
DESCRIPTION
DS-290269
Solid riser bushing kit
SUG. RETAIL
$40.95
40.95
SUG. RETAIL
$71.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1" FLUSH
MOUNT
POLYURETHANE
HANDLEBAR
BUSHING KITS
CABLES
HANDLEBAR RETAINER WASHERS
BRAKES
TANKS &
OIL FILTERS
•Includes four stainless steel
retaining washers
PART #
DESCRIPTION
DS-222798 Repl. handlebar retainer
washers (4-pk.) for
73-09 models using 1/2"
handlebar studs or bolts
1611-0498
0604-0006
•Adds needed height
for tight handlebar to tank applications
•Chrome components hide mounting bolts
when installed
•Available with either fine or coarse
thread hardware
PART #
DESCRIPTION
SUG. RETAIL
1/2"-20
$67.95
0604-0006
1/2"-13
0604-0007
67.95
SUG.
RETAIL
$36.95
DASHES
& GAUGES
NESS TECH®
HANDLEBAR RISER
BUSHING KITS
•Kits include polished 303
stainless steel custom washers,
polyurethane bushings,
bushing inserts and Allen
head bolts
•Available in fine- or coarse-thread applications
PART #
DESCRIPTION
SUG. RETAIL
1/2"-20
$45.95
1611-0498
1/2"-13
1611-0499
45.95
0604-0003
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
738
GOODEN TIGHT™
CUSTOM RISER
BUSHING KITS
FLUSH HANDLEBAR RISER
BUSHING KIT
•Kit includes bushings, spacers and bolts
to install your handlebars
•Features countersunk lower washers for a true
custom look
•Available in 1/2"-13 threaded application
PART #
DESCRIPTION
SUG. RETAIL
0602-0113
Flush riser bushing kit
$35.95
•Kits feature Gooden
Tight™ riser bushings,
flathead mounting
bolts and billet washers
•Special cup washers hide the bolt heads
for a clean installation
•Available with coarse or fine threads
PART #
DESCRIPTION
SUG. RETAIL
$47.95
0604-0003 1/2" - 13 x 3" (coarse)
0604-0004 1/2" - 20 x 3" (fine)
47.95
7806-1055
GOODEN
TIGHT™
SPRINGER RISER STUD BUSHING KIT
•Kit includes poly bushings, riser studs, mounting
bolts and billet inserts
•Sold as a set
PART #
DESCRIPTION
SUG. RETAIL
7806-1055
For 97-07 FLSTS/C
$52.95
7806-1056
For 88-06 FXSTS
52.95
SECTION
12
WINDSHIELDS
DS-430586
TOURING
RISER BOLT CONE KIT
•Cone kit replaces the bottom
cup washers and hides the head of the screw and lock washer
•All parts are chrome-plated
PART #
DESCRIPTION
SUG. RETAIL
0602-0187 Coarse thread (1/2" -13x3) riser/handlebar mounting
kit (for most stock-style aluminum risers)
$40.95
ALI BABA
RISER BOLT KIT
•Highlight a forgotten detail
•Two 1/2" coarse riser bolts
feature small setscrews
drilled into the bolt head
•Our cool Ali Baba bolt covers screw right
on to add style
•Perfect match for other Ali Baba products
PART #
0602-0038
DESCRIPTION
Ali Baba riser bolt kit
LUGGAGE
RISER BOLT CONE KITS
•These popular riser mounting kits
feature Gardner-Westcott socket-head bolts, lock washers, and cups
and cones that are machined from cold-rolled steel
•Cones replace bottom cup washers and completely hide the head
of the screw and lock washer
•Available in 1/2"-13 or 1/2"-20 thread pitch to fit virtually all models
•All components are chrome-plated and manufactured in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-430586 Coarse thread (1/2"-13 x 3") riser/handlebar
mounting kit (for most stock-style aluminum risers)
$53.95
DS-430587 Fine thread (1/2"-20 x 3") riser/handlebar mounting
kit (for most bars with welded-on risers)
53.95
SUG. RETAIL
$82.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
WARRIOR RISER
BOLT COVERS
•T-6 billet aluminum
construction
•Chrome-plated
1803-6122
or black finish
•Cover the bolt head and washers
•Fit socket-head or hex-head riser bolts;
sold in pairs
PART #
DESCRIPTION
1803-6122
Bolt cover set, chrome
2120-0149
Bolt cover set, black
2120-0149
SUG. RETAIL
$82.95
73.95
CHROME RISER
MOUNTING BOLT KIT
DESCRIPTION
Riser bolt kit
•Chrome-plated T-6 aluminum
•Stylish Elite and Gothic handlebar riser bolt
covers hide unsightly bolt heads holding
risers to the top of the triple tree
•Setscrew application
•Sold in pairs
0602-0041
PART #
DESCRIPTION
0602-0041
Elite 1" riser bolt covers
0602-0042
Gothic 1" riser bolt covers
TRANSMISSION
& DRIVELINE
0602-0042
SUG. RETAIL
$48.95
58.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
CHROME RISER BOLT CAPS
•Die-cast caps fit over the hex-head
riser bolts that are exposed under the top triple tree
•For 3/4" riser bolt heads or nuts; hex wrench included
PART #
DESCRIPTION
DS-222879
For 71-08 FX and 54-08 XL
•Mounting kit includes
1/2”-13 x 23/4” hex-head
bolts, lock washers and
cup washers
PART #
2401-0293
RISER BOLT COVERS
SUG. RETAIL
$12.95
SUG. RETAIL
$11.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
SPRINGER
RISER STUDS
•Chrome steel
riser studs
•Sold as a pair
PART #
0602-0114
GROOVED RISER
MOUNTING BOLTS
•Grooved socket-head fasteners
offer function and style to any custom or race bike
•Manufactured from only the best materials that are certified SDF
(Seamless and Defect Free), heat treated to a minimum of 180,000 psi
(20% stronger than GR8) and then the threads are rolled to a UNJ3A spec
•Sold in set of four
PART #
DESCRIPTION
SUG. RETAIL
2401-0362
For most stock-style aluminum risers
$19.95
(1/2”-13 x 23/4”)
2401-0363
For custom applications (1/2”-20 x 21/2”)
22.95
BRAKES
DESCRIPTION
For 88-06 FXSTS;
repl. OEM #45444-88
DS-430574
SUG. RETAIL
TANKS &
OIL FILTERS
$31.95
DS-430580
DS-430570
FRAMES,
SUSPENSION
& FENDERS
CUSTOM HANDLEBAR AND RISER
MOUNTING BOLTS
•Mounting bolts are available in hex- or Allen-head styles
•Choice of chrome or black finish
0602-0110
SPRINGER RISER MOUNTING STUDS
•Designed for custom risers to fit onto an
aftermarket Springer front end
•Sold in pairs
PART #
0602-0110
0602-0217
DESCRIPTION
x 1/2-20" (pr.)
1/2-20" x 11/2" (pr.)
1/2-13"
SUG. RETAIL
$16.95
16.95
DASHES
& GAUGES
PART #
DESCRIPTION
CHROME HEX-HEAD BOLTS
DS-430574 1/2"-13 x 21/2" (pr.)
DS-430575 1/2"-13 x 23/4" (pr.)
DS-430576 1/2"-13 x 3" (pr.)
DS-430577 1/2"-20 x 21/2" (pr.)
DS-430578 1/2"-20 x 23/4" (pr.)
DS-430579 1/2"-20 x 3" (pr.)
CHROME ALLEN-HEAD BOLTS
DS-430580 1/2"-13 x 21/2" (pr.)
DS-430581 1/2"-13 x 23/4" (pr.)
SUG.
RETAIL
$5.95
5.95
5.95
5.95
5.95
5.95
6.95
7.95
SUG.
PART #
DESCRIPTION
RETAIL
CHROME ALLEN-HEAD BOLTS (CONT)
DS-430571 1/2"-13 x 23/4" (10-pk.) $21.95
7.95
DS-430582 1/2"-13 x 3" (pr.)
DS-430583 1/2"-20 x 21/2" (pr.)
6.95
1
3
/2"-20 x 2 /4" (pr.)
7.95
DS-430584
1
3
DS-430588
/2"-20 x 2 /4" (10-pk.)
35.95
1
/2"-20 x 3" (pr.)
7.95
DS-430585
BLACK ALLEN-HEAD BOLTS
1
1
DS-430570
/2"-13 x 1 /2" (ea.)
1.95
DS-430589 1/2"-20 x 11/2" (ea.)
1.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
739
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
STYLE KING
MASTER CYLINDER
ASSEMBLIES AND CLUTCH
LEVER ASSEMBLIES
0610-0062
0610-0061
•Accept stock switch housings
including radio and cruise controls
•Clutch control available in cable, or 9/16” and 11/16” hydraulic; brake
side is available in 9/16” for single-disc brake and 11/16” for dual-disc front brakes
•Tapered design clears larger bars; reservoir cap is fastened with bolts that install from
beneath the hand control to provide a hidden-hardware look
•Use Joker’s exclusive long-life brake piston assembly
FOR 96-06 MODELS (EXCEPT 06 V-ROD)
PART #
DESCRIPTION
9/16” BORE BRAKE MASTER CYLINDERS
0610-0061
Chrome
0610-0062
Black anodized
11/16” BORE BRAKE MASTER CYLINDERS
0610-0063
Chrome
0610-0064
Black anodized
9/16” BORE HYDRAULIC CLUTCH MASTER CYLINDERS
0610-0065
Chrome
SUG. RETAIL
$329.95
329.95
329.95
329.95
329.95
0610-0066
0610-0065
0612-0081
PART #
DESCRIPTION
9/16” BORE HYDRAULIC CLUTCH MASTER CYLINDERS (CONT)
0610-0066
Black anodized
11/16” BORE HYDRAULIC CLUTCH MASTER CYLINDERS
0610-0067
Chrome
0610-0068
Black anodized
MECHANICAL CLUTCH LEVER ASSEMBLIES
0612-0081
Chrome
0612-0082
Black anodized
BRAKE AND CLUTCH MASTER
CYLINDER ASSEMBLIES AND
CLUTCH LEVER ASSEMBLIES
0612-0082
SUG. RETAIL
$329.95
329.95
329.95
209.95
209.95
0610-0202
•Clean design makes these assemblies
a great choice for custom applications
•CNC-machined
0610-0206
•Assemblies fit 1” diameter handlebars
0610-0203
•Include mounting clamps and levers
•Hydraulic and cable clutch assemblies available
•Available with or without switch kit
•Switch kit includes three momentary switches with chrome buttons, switch housing and wiring
•Switches can be wired internally or externally
0610-0207
•Sold each
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
BRAKE MASTER CYLINER ASSEMBLIES FOR 1” HANDLEBARS, 5/8” BORE
CLUTCH MASTER CYLINDER ASSEMBLIES FOR 1” HANDLEBARS,
0610-0202 Polished master cylinder assembly
$178.95 9/16” BORE (CONT)
$283.95
0610-0203 Polished master cylinder assembly w/ switch kit
254.95 0610-0209 Chrome master cylinder assembly w/ switch kit
0610-0204 Chrome master cylinder assembly
210.95 CLUTCH ASSEMBLY FOR USE W/ L88-06 OEM-STYLE CABLE
0610-0205 Chrome master cylinder assembly w/ switch kit
283.95 AND 1” HANDLEBARS
0612-0142 Polished assembly
127.95
CLUTCH MASTER CYLINDER ASSEMBLIES FOR 1” HANDLEBARS, 9/16” BORE
210.95
0610-0206 Polished master cylinder assembly
178.95 0612-0143 Polished assembly w/ switch kit
158.95
0610-0207 Polished master cylinder assembly w/ switch kit
254.95 0612-0144 Chrome assembly
232.95
0610-0208 Chrome master cylinder assembly
210.95 0612-0145 Chrome assembly w/ switch kit
CABLES
0610-0192
0610-0193
BRAKES
“RETRO” HANDLEBAR CONTROL KITS
TANKS &
OIL FILTERS
•Revolutionary handlebar controls designed with clean retro styling for almost any custom application
•Machined from 6061 T-6 billet aluminum; available in a chrome or black anodized finish
•Throttle housings and grip not included
PART #
0610-0192
DESCRIPTION
Chrome w/ 7/16” bore
SUG. RETAIL
$578.95
PART #
0610-0193
DESCRIPTION
Black w/ 9/16” bore
SUG. RETAIL
$551.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
0610-0178
FOOTRESTS RAD III HANDLEBAR CONTROLS
& LICENSE •The industry’s first factory replacement full custom hand controls
stock handlebars a great new look
PLATE FRAMES •Gives
•Kits include master cylinder with brake lever, clutch lever assembly and appropriate chrome switch housings (switches not included)
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
740
•Controls and switch housings accept all factory wires, cables, lines and switches
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
HANDLEBAR CONTROLS FOR 96-07 MODELS WITH HYDRAULIC CLUTCH
HANDLEBAR CONTROLS FOR 96-07 MODELS WITH CABLE CLUTCH (CONT)
0610-0194 Single-disc models, 9/16” master cylinder
$392.95 0610-0178 Dual-disc models w/ radio and cruise,
11/16” master cylinder
$351.95
0610-0195 Dual-disc models, 11/16” master cylinder
392.95
0610-0196 Dual-disc models w/ radio, 11/16” master cylinder
392.95 COMPONENTS AND REPLACEMENT PARTS
0611-0024 9/16” brake master cylinder (w/ lever)
182.95
0610-0197 Dual-disc models w/ radio and cruise,
11/16” master cylinder
392.95 0611-0025 11/16” brake master cylinder (w/ lever)
182.95
HANDLEBAR CONTROLS FOR 96-07 MODELS WITH CABLE CLUTCH
0615-0094 Clutch lever assembly
92.95
0610-0175 Single-disc models, 9/16” master cylinder
351.95 0617-0069 9/16” complete rebuild kit
37.95
11
11
0610-0176 Dual-disc models, /16” master cylinder
351.95 0617-0070
/16” complete rebuild kit
37.95
0610-0177 Dual-disc models w/ radio, 11/16” master cylinder
351.95
SECTION
12
WINDSHIELDS
TOURING
DS-290827
DS-290757
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
“PETITE” HANDLEBAR CONTROL KITS
CUSTOM HANDLEBAR CONTROL KITS
•CNC-machined and brilliantly chrome-plated
•Designed for the rider who wants a clean handlebar with no switches
•Available with 5/8” or 3/4” master cylinders and standard clutch controls
•Matching throttle housings available separately
SUG.
PART #
DESCRIPTION
RETAIL
HANDLEBAR CONTROLS
DS-290827 W/ 5/8” master cylinder
$480.95
DS-290828 W/ 3/4” master cylinder
480.95
REPLACEMENT PARTS
DS-290739 Master cylinder w/ lever, 5/8” bore
302.95
DS-273142 Front brake lever
65.95
DS-273149 Standard clutch lever
65.95
DS-290743 Standard clutch perch (lever not included)
112.95
DS-195011 5/8” rebuild kit for 94-06 Ness-Tech® master cylinders
41.95
DS-195012 3/4” rebuild kit for 94-06 Ness-Tech master cylinders
41.95
DS-195013 5/8” rebuild kit for hydraulic clutch master cylinder
41.95
DS-195057 5/8” rebuild kit for 93-earlier Ness-Tech master cylinders
35.95
•Lean and mean control kit features small button switches for that sleek,
clean look
•Switches used for applications such as starting, turn signals, horn or kill
buttons; cannot be used as a high-low beam switch
•Chrome finish
•Kit includes front brake master cylinder, a clutch lever perch and lever,
two custom switch housings and four button switches;
throttle not included
SUG.
PART #
DESCRIPTION
RETAIL
$627.95
DS-290757 Handlebar controls, 5/8” master cylinder
627.95
DS-290758 Handlebar controls, 3/4” master cylinder
DS-273142 Repl. brake lever
65.95
DS-273149 Repl. standard clutch lever
65.95
DS-290746 Petite switch clamp
104.95
DS-272156 Repl. switch
14.95
DS-272157 Repl. switch cap
6.95
DS-272184 Repl. switch w/ potted wire for 97 and later Ness controls
31.95
®
DS-195011 5/8” rebuild kit for 94-06 Ness-Tech master cylinders
41.95
DS-195012 3/4” rebuild kit for 94-06 Ness-Tech
master cylinders
41.95
DS-195057 5/8” rebuild kit for 93-earlier Ness-Tech
master cylinders
35.95
NESS-TECH® HANDLEBAR CONTROL KIT
PART #
DESCRIPTION
REPLACEMENT COMPONENTS (CONT)
DS-273149
Repl. standard clutch lever
5/8” rebuild kit for 94-06 Ness-Tech®
DS-195011
master cylinders
$65.95
41.95
bore; chrome
bore; black
9/16” bore; chrome
9/16” bore; black
$345.95
345.95
345.95
345.95
BRAKES
TANKS &
OIL FILTERS
FOOTRESTS
& LICENSE
PLATE FRAMES
0612-0140
TIRES,
TUBES &
WHEELS
0612-0141
FOR 96-06 MODELS
11/16”
LIGHTING
FRAMES,
SUSPENSION
& FENDERS
•Machined from high quality billet aluminum
construction and available in brilliant chrome or black
•Two-piece design clamps from the bottom to hide the mounting screws
•Designed to work with OEM switch housings and most OEM levers
•Includes Jaybrake lever with rubber insert, but will work with almost any
stock lever style
•Brake controls are available in 9/16” or 11/16” bore diameters and will accept
stock internals
•Also include banjo bolts to fit either 7/16” or 3/8” threads for banjo fittings
•Clamp onto 1” diameter bars
•Made in the U.S.A. with domestic materials
11/16”
ELECTRICAL
DASHES
& GAUGES
STOCK OEM STYLE
HANDLEBAR CONTROLS
SUG. RETAIL
GASKETS
& SEALS
SUG. RETAIL
0610-0201
DESCRIPTION
TRANSMISSION
& DRIVELINE
CABLES
0610-0198
PART #
BRAKE CONTROLS
0610-0198
0610-0199
0610-0200
0610-0201
ENGINE
HANDLEBARS,
CONTROLS
& MIRRORS
DS-290771
•Chrome billet aluminum kit includes a handlebar master cylinder, clutch
lever perch, clutch lever and two switch housings; switches not included
•Accepts all the factory switches, buttons, etc. (except front brake light)
•Single-disc applications only
PART #
DESCRIPTION
SUG. RETAIL
FOR 96-06 MODELS (EXCEPT 06 DYNA GLIDE, 04-06 XL)
DS-290771
Handlebar controls, 5/8” master cylinder
$725.95
REPLACEMENT COMPONENTS
DS-273142
Repl. brake lever
65.95
FUEL/AIR
SYSTEMS
PART #
DESCRIPTION
MECHANICAL CLUTCH CONTROLS
0612-0140
Chrome
0612-0141
Black
SUG. RETAIL
$220.95
220.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
741
SECTION
12
HANDLEBAR CONTROLS
WINDSHIELDS
TOURING
•Machined from high-quality billet aluminum
•Feature three unique styles with either solid, slotted or easy-grip levers; easy-grip levers have raised rubber accent
•Master cylinders are available for brake or clutch applications
•Matching mechanical clutch lever assembly is also available
•All components sold separately
0610-0159
•Controls available with chrome or black anodized finish
•Adjustable levers are for shorter reach
0610-0150
LUGGAGE
0610-0148
DS-290811
SEATS &
SISSY BARS
EXHAUST
0610-0152
0610-0153
0610-0161
0610-0155
0610-0156
FUEL/AIR
SYSTEMS
0611-0022
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
0611-0023
BRAKE CONTROLS
PART #
DESCRIPTION
CLASSIC-STYLE WITH SOLID LEVER
0610-0148 3/4” bore; chrome
0610-0149 3/4” bore; black anodized
DS-290801 5/8” bore; chrome
0610-0157 5/8” bore w/ brake light switch; chrome
0610-0158 5/8” bore w/ brake light switch; black anodized
CLASSIC-STYLE WITH EASY-GRIP LEVER
0610-0150 3/4” bore w/ adjustable lever; chrome
0610-0151 3/4” bore; chrome
DS-290811 5/8” bore; chrome
DS-290812 5/8” bore w/ adjustable lever; chrome
0610-0160 5/8” bore w/ brake light switch; chrome
0610-0159 5/8” bore w/ adjustable lever and brake light
switch; chrome
SUG. RETAIL
$300.95
300.95
300.95
300.95
345.95
345.95
300.95
300.95
299.95
299.95
345.95
345.95
0610-0170
PART #
DESCRIPTION
J-STYLE WITH SLOTTED LEVER
0610-0154 5/8” bore; chrome
0610-0163 5/8” bore w/ brake light switch;
NEW IMAGE-STYLE WITH SLOTTED LEVER
0611-0022 5/8” bore; chrome
NEW IMAGE-STYLE WITH SOLID LEVER
0611-0023 5/8” bore; chrome
SUG. RETAIL
chrome
black anodized
$322.95
322.95
368.95
368.95
chrome
black anodized
345.95
345.95
391.95
391.95
chrome
black anodized
345.95
345.95
391.95
391.95
DS-290823
HANDLEBARS,
CONTROLS
& MIRRORS
0610-0172
0610-0168
DS-290824
CABLES
0610-0169
0610-0173
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
0612-0092
CLUTCH CONTROLS – HYDRAULIC & MECHANICAL
PART #
DESCRIPTION
SUG. RETAIL
CLASSIC-STYLE WITH SOLID LEVER
0610-0167 5/8” bore hydraulic clutch assembly; chrome
$300.95
0610-0168 5/8” bore hydraulic clutch assembly; black anodized
300.95
DS-290804 9/16” bore hydraulic clutch assembly; chrome
300.95
300.95
DS-290823 Mechanical clutch lever assembly; chrome
207.95
0612-0114 Mechanical clutch lever assembly; black anodized
207.95
CLASSIC-STYLE WITH EASY-GRIP LEVER
5
0610-0169 /8” bore hydraulic clutch assembly; chrome
300.95
DS-290814 9/16” bore hydraulic clutch assembly; chrome
300.95
DS-290824 Mechanical clutch lever assembly; chrome
207.95
J-STYLE WITH SLOTTED LEVER
322.95
0616-0041
742
PART #
DESCRIPTION
SUG. RETAIL
J-STYLE WITH SLOTTED LEVER (CONT)
$322.95
0612-0088 Mechanical clutch lever assembly; chrome
207.95
NEW IMAGE-STYLE WITH SLOTTED LEVER
345.95
345.95
219.95
220.95
NEW IMAGE-STYLE WITH SOLID LEVER
345.95
345.95
220.95
220.95
CLAMP SWITCHES
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
0612-0093
0612-0088
0616-0062
•Two-button micro-switch clamp replaces clamp
section included with control
•Features two 1/2 amp momentary switches
PART #
DESCRIPTION
SUG. RETAIL
TWO-BUTTON MICRO-SWITCH CLAMP
0616-0041 For Classic-style controls; chrome
$81.95
0616-0062 For Classic-style controls; black
81.95
DS-243463
REPLACEMENT
MASTER CYLINDERS
PART #
DS-243463
DS-243464
DS-243513
DESCRIPTION
For 5/8” master cylinders
SUG. RETAIL
$24.95
24.95
24.95
SECTION
12
WINDSHIELDS
DS-280352
DS-280354
TOURING
LUGGAGE
SEATS &
SISSY BARS
HANDLEBAR CONTROL KITS WITH SWITCHES
•Die-cast OEM-style metal housing with a chrome finish
•Switches come pre-assembled with 48” wire leads
•Kits include clutch lever assembly, master cylinder assembly, housings with switches and hardware
PART #
DESCRIPTION
DS-280352
Kit w/ 5/8” bore master cylinder and chrome switches for 84-95 models (single disc)
DS-280353
Kit w/ 11/16” bore master cylinder and chrome switches for 84-95 models (dual disc)
DS-280354
Kit w/ 3/4” bore master cylinder and black switches for 72-81 models (single disc)
EXHAUST
SUG. RETAIL
$349.95
349.95
159.95
FUEL/AIR
SYSTEMS
ENGINE
0610-0140
TRANSMISSION
& DRIVELINE
0610-0139
GASKETS
& SEALS
ELECTRICAL
LIGHTING
0610-0019
Left
HANDLEBARS,
CONTROLS
& MIRRORS
0616-0056
CABLES
0610-0019
Right
0610-0007
BRAKES
CHROME HANDLEBAR CONTROL KITS
•Chrome handlebar control kits, available with or without switches and wiring harness
•Die-cast aluminum housings
•Feature radiused edges and tapered clamps for a clean, smooth look
•Kits without switches accept 96-09 OEM-style wiring
•Will also accept Drag Specialties lower radio/cruise control switches and switch housings
•Include neutral/starter lockout switch needed for 07-09 models
•See page 635 for replacement switches
•Use OEM-style brake master cylinder rebuild kits
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
KITS WITH SWITCHES AND MECHANICAL CLUTCH FOR FOR 96-09 MODELS
REPLACEMENT PARTS FOR 96-09 KITS WITH MECHANICAL CLUTCH (CONT)
(EXCEPT DRESSERS W/ AUDIO CONTROLS, 08-09 FLHT/FLHR/FLTR/FLHX
0616-0060 Bottom right switch housing
$15.95
AND 04-09 XL)
0610-0002 W/ 9/16” brake master cylinder assembly
9
$369.95
0610-0140 W/ /16” brake master cylinder, single-disc models
for single-disc
169.95
0610-0139 W/ 11/16” brake master cylinder, dual-disc models
369.95 0610-0006 W/ 11/16” brake master cylinder assembly for dual-disc
166.95
KITS WITHOUT SWITCHES AND MECHANICAL CLUTCH FOR 96-09 MODELS
0610-0007 Mechanical clutch lever assembly
(EXCEPT 08-09 FLHT, FLHR, FLTR FLHX AND 04-09 XL)
(96-06 models only)
49.95
259.95 DS-290689 Chrome clutch lever bracket (except 04-09 XL)
0610-0138 W/ 9/16” brake master cylinder, single-disc models
19.95
11
0610-0137 W/ /16” brake master cylinder, dual-disc model
259.95 DS-290697 Chrome clamp half (except 04-09 XL)
12.95
KITS WITHOUT SWITCHES AND HYDRAULIC CLUTCH FOR 96-06 MODELS
0610-0179 Chrome master cylinder cover
15.95
(EXCEPT 06 DYNA GLIDE, 04-06 XL)
0610-0180 Gasket for master cylinder
3.95
0610-0019 W/ 11/16” clutch master cylinder and 9/16” brake
REPLACEMENT PARTS FOR 96-06 KITS WITH HYDRAULIC CLUTCH
master cylinder, single-disc models
344.95 0610-0020 11/16” clutch master cylinder assembly
166.95
0610-0018 W/ 11/16” clutch master cylinder and 11/16” brake
0610-0004 Top left switch housing
15.95
master cylinder, dual-disc models
339.95 0610-0005 Bottom left switch housing
15.95
REPLACEMENT PARTS FOR 96-09 KITS WITH MECHANICAL CLUTCH
0616-0001 Top right switch housing
15.95
0616-0056 Chrome switch housing kit, no switches
49.95 0616-0002 Bottom right switch housing
15.95
0616-0057 Top left switch housing
15.95 0613-0102 Repl. clutch lever for hydraulic clutch handlebar
0616-0058 Bottom left switch housing
15.95
control kit PART #s 0610-0018, 0610-0019
21.95
0616-0059 Top right switch housing
15.95 0617-0071 Rebuild kit for 11/16” clutch master cylinder
24.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
743
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
0610-0060 Right
0610-0060 Left
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
0610-0060
HANDLEBAR CONTROL KITS
•Cool chrome handlebar control kits for late-model Sportys
•Versions for single- and dual-disc brake systems
•Aluminum construction with a deep chrome finish
•Use OEM switches or equivalent (not included)
•Replacement parts also available separately
PART #
DESCRIPTION
HANDLEBAR CONTROL KITS FOR 07-09 XL MODELS
9/16” bore dual-disc brake kit
0610-0146
1/2” bore single-disc brake kit
0610-0147
HANDLEBAR CONTROL KITS FOR 04-06 XL MODELS
9/16” bore dual-disc brake kit
0610-0059
1/2” bore single-disc brake kit
0610-0060
SUG. RETAIL
$299.95
299.95
279.95
279.95
PART #
DESCRIPTION
9/16” bore master cylinder assembly
0611-0018
1/2” bore master cylinder assembly
0611-0019
0612-0139
Clutch lever assembly 04-09 XL
0617-0039
Master cylinder rebuild kit, 9/16”
0617-0040
Master cylinder rebuild kit, 1/2”
SUG. RETAIL
$158.95
158.95
54.95
29.95
29.95
ENGINE
TRANSMISSION
& DRIVELINE
DS-290723
GASKETS
& SEALS
DS-290721
ELECTRICAL
DS-290722
DS-290710
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
DS-290697
HANDLEBAR CONTROL KITS WITHOUT SWITCHES
TANKS &
OIL FILTERS
DASHES
& GAUGES
•Customize the most visible area the factory overlooked – the handlebar controls
•Chrome die-cast clutch/brake controls with switch housings are sold in complete kits or as individual components
•OEM wires and switches mount directly into these housings, so there is no need for new wires and switches
•Each Complete Kit includes clutch lever assembly with clamp half, a master cylinder assembly with clamp half and the right and left switch housings
•Switch Housing Kit includes right and left housing only with mounting hardware
•Individual components are available to replace specific pieces instead of the complete assembly
•Kits come complete with all hardware for easy installation
NOTE: Lower switch housings will not fit 82-95 models with radio control switches in housings.
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
744
NOTE: Use appropriate master cylinder rebuild kit and levers for equivalent OEM model year and bore size.
PART #
DESCRIPTION
SUG. RETAIL
COMPLETE KITS (EXCEPT DRESSER MODELS W/ AUDIO CONTROLS)
DS-290720 Kit w/ 3/4” bore master cylinder for 82-83 dual
disc models
$249.95
DS-290721 Kit w/ 5/8” bore master cylinder for 84-95 single
disc models
249.95
DS-290722 Kit w/ 11/16” bore master cylinder for 84-95 dual
disc models
249.95
SWITCH HOUSING KIT
DS-290723 Switch housing kits w/ hardware for 82-95 models
59.95
INDIVIDUAL/REPLACEMENT COMPONENTS
DS-290710 Clutch lever assembly w/ pivot pin and bushing
for 82-95 models
39.95
DS-290794 11/16” dual-disc master cylinder assembly w/ lever
and clamp half for 84-95 models (7/16”)
154.95
DS-290792 3/4” dual-disc master cylinder assembly w/ lever
and clamp half for 82-83 models (3/8”)
154.95
0610-0045 5/8” single-disc master cylinder w/ lever and
clamp half for 82-95 models
154.95
PART #
DESCRIPTION
INDIVIDUAL/REPLACEMENT COMPONENTS (CONT)
DS-290690 Upper right switch housing for 82-95 models;
repl. OEM #71564-82A (ea.)
DS-290691 Lower right switch housing for 82-95 models;
repl. OEM #71563-82A (ea.)
DS-290692 Upper left switch housing for 82-95 models;
repl. OEM #71567-82 (ea.)
DS-290693 Lower left switch housing for 82-95 models;
repl. OEM #71568-82A (ea.)
DS-290698 Chrome clamp half for 82-95 models;
repl. OEM #45044-82 (ea.)
DS-190720 Chrome socket head screws for
clamp halves (4-pk.)
DS-273960 Chrome clutch/brake lever set for
82-95 models (pr.)
SUG. RETAIL
$15.95
15.95
15.95
15.95
14.95
16.95 (4-pk.)
24.95 (pr.)
SECTION
DS-290321
12
DS-290323
WINDSHIELDS
TOURING
DS-290327
LUGGAGE
DS-290319
SEATS &
SISSY BARS
CHROME BILLET
HANDLEBAR CONTROLS
•Available in a smooth design,
with or without switches
•Clutch side control available
with turn signal and horn switches
•Brake side control available with turn
signal and starter switches or with
turn signal, starter and kill switches
•Right side (brake) master cylinder assembly is available
with 9/16” or 11/16” bore
•Left side (hydraulic clutch) master cylinder assembly
is available with 9/16” or 11/16” bore
•Brake master cylinder comes with a built-in brake switch
•Kits include mounting hardware and levers
•Brake side controls and clutch side controls
sold separately
FUEL/AIR
SYSTEMS
ENGINE
DS-195033
DS-290332
TRANSMISSION
& DRIVELINE
NOTE: Matching hi-lo light switch (PART #s DS-290004,
DS-290005) and throttle housing (PART #DS-243649)
are not included; must be purchased separately.
PART #
DESCRIPTION
HYDRAULIC CLUTCH SIDE CONTROL
9/16” bore w/ switches
DS-290325
11/16” bore w/ switches
0612-0010
9/16” bore w/o switches
DS-290321
0612-0008
MECHANICAL CLUTCH SIDE CONTROL
(USES 87-06 OEM-STYLE BIG TWIN CLUTCH CABLE)
DS-290317
W/ switches
DS-290319
W/o switches
EXHAUST
DS-290317
SUG. RETAIL
$334.95
334.95
251.95
251.95
259.95
169.95
PART #
DESCRIPTION
BRAKE SIDE CONTROL
9/16” bore w/ switches (w/o kill)
DS-290327
9/16” bore w/ switches (w/ kill)
DS-290332
DS-290323
11/16” bore w/ switches (w/o kill)
DS-290331
11/16” bore w/ switches (w/ kill)
DS-290334
DS-290329
MASTER CYLINDER REBUILD KITS
9/16”; repl. OEM #45006-96A
DS-195032
11/16”; repl. OEM #45072-96A
DS-195033
SUG. RETAIL
$369.95
409.95
271.95
425.95
409.95
271.95
BILLET HANDLEBAR CONTROLS
SOUTH FLORIDA CHOPPER
SIGNATURE SERIES
HAND CONTROLS
BY SUPREME LEGENDS USA
PART #
0610-0079
0610-0080
0610-0081
0610-0073
0612-0084
BRAKES
0610-0074
TANKS &
OIL FILTERS
DASHES
& GAUGES
PART #
DESCRIPTION
MECHANICAL CLUTCH ASSEMBLY
0612-0084
Chrome
0612-0085
Black
SUG. RETAIL
$198.95
198.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
0610-0081
DESCRIPTION
11/16” bore brake master cylinder assembly
11/16” bore clutch master cylinder assembly
Mechanical clutch lever assembly
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
0610-0079
•Chrome-plated billet aluminum
•Hidden hardware and streamline contours produce a sleek look
•Brake control and clutch controls are sold separately
ELECTRICAL
LIGHTING
14.95
14.95
0610-0071
•Front master cylinder assemblies are available
in 9/16” or 11/16” bore size
•Compatible with most stock and aftermarket
4- and 6-piston calipers
•Hydraulic clutch master cylinders are available in 11/16”
or 9/16” bore sizes to work with all styles of clutch actuators
•Utilize late model OEM seals for great performance and
quick serviceability
•Contain nylon bearings and spring loading for smooth,
no-rattle operation and long-term performance
•Include a recessed cover with a flex-type seal for
0610-0112
leak-proof operation
•Fit up to 11/2” diameter bars
•Work with standard throttle and hand grip components
•Brake assemblies and clutch assemblies sold separately
PART #
DESCRIPTION
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
FRONT BRAKE ASSEMBLY, 9/16” BORE
HYDRAULIC CLUTCH ASSEMBLY, 9/16” BORE
0610-0071
Chrome
$339.95
0610-0073
Chrome
$339.95
0610-0072
Black
339.95
0610-0074
Black
339.95
FRONT BRAKE ASSEMBLY, 11/16” BORE
HYDRAULIC CLUTCH ASSEMBLY, 11/16” BORE
0610-0111
Chrome
339.95
0610-0075
Chrome
339.95
0610-0112
Black
339.95
0610-0076
Black
339.95
GASKETS
& SEALS
0610-0080
SUG. RETAIL
$298.95
298.95
260.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
745
SECTION
12
WINDSHIELDS
TOURING
Reservoir
cap screws
on for easy
access
LUGGAGE
0611-0011
0611-0012
SEATS &
SISSY BARS
0616-0028
0612-0073
0616-0027
EXHAUST
0652-0424
FUEL/AIR
SYSTEMS
0611-0013
0616-0029
0652-0423
ENGINE
0612-0075
0612-0074
TRANSMISSION
HANDLEBAR CONTROLS
& DRIVELINE JX
•Available in show chrome or deep, hard, black-anodized finishes
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
•Designed with a special bushing that doubles as a mirror shaft mount for an extra-clean look (mirrors are not included)
•Stylish solid stainless steel pivot pin for non-mirror applications
•Unique master cylinder reservoir cap screws on to provide instant access to brake fluid without having to use a wrench
•Feature Joker’s exclusive self-lubricating polymer piston and seal kits, also produced by Joker; special ball bearing-actuated piston rides in a hardsurface roller-burnished bore for more precise feel and longer life as the bearing glides across the piston as you engage the brake or clutch
•Master cylinders available with or without brake light switches in 9/16” (single disc brake) and 11/16” (dual disc front brake)
•Left-side hydraulic clutch master cylinders are available in 9/16” or 11/16” or a mechanical cable version
•Installs on handlebar with integrated pinch clamp system that is ultra-compact without an extra clamp piece to bolt in place to provide a trim and
clean look
•Switch housings feature high-quality Marquardt waterproof, dustproof and heat-resistant switches for brake, turn signal, horn and kill switch
function (sold separately)
•Designed to fit 1”-diameter handlebar applications; master cylinder bodies are relieved to accept up to 11/2” diameter handlebars right up to the
clamp face
•See page 766 for grip spacers
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
9/16” BORE BRAKE SIDE CONTROL
MECHANICAL CLUTCH SIDE CONTROL
(USES 87-06 OEM-STYLE BIG TWIN
W/ BRAKE LIGHT SWITCH
ASSEMBLY W/O BRAKE LIGHT SWITCH
0611-0010
Chrome
$349.95 0611-0016
Chrome
$299.95 CLUTCH CABLE)
Chrome
$209.95
0611-0011
Black anodized
349.95 0611-0017
Black anodized
299.95 0652-0423
0652-0424
Black anodized
209.95
ROUND MASTER CYLINDER
W/O BRAKE LIGHT SWITCH
RIGHT SIDE SWITCH HOUSING
BRAKE SWITCH ASSEMBLY
0611-0012
Chrome
299.95 0616-0027
Chrome
189.95
Chrome
69.95 0616-0029
0611-0013
Black anodized
299.95 0616-0028
Black anodized
189.95
Black
69.95 0616-0030
9/16” BORE HYDRAULIC CLUTCH SIDE CONTROL
LEFT SIDE SWITCH HOUSING
W/ BRAKE LIGHT SWITCH
0612-0073
Chrome
299.95 0616-0031
Chrome
189.95
0611-0014
Chrome
349.95 0612-0074
Black anodized
299.95 0616-0032
Black anodized
189.95
0611-0015
Black anodized
349.95 11/16” BORE HYDRAULIC CLUTCH SIDE CONTROL
0612-0075
Chrome
299.95
0612-0076
Black anodized
299.95
0613-0204
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
746
0613-0210
0613-0206
0613-0209
0614-0165
JX SERIES HANDCONTROL SHORTY LEVERS
•Optional shorty levers change the look of your standard JX
hand control levers
•Available in Smooth or Joker’s standard “Finger-Indent” design
PART #
DESCRIPTION
HYDRAULIC CLUTCH LEVERS
0613-0204
Chrome
0613-0205
Black
0613-0208
Smooth chrome
0613-0209
Smooth black
SUG. RETAIL
$64.95
64.95
64.95
64.95
0614-0168
0613-0207
PART #
DESCRIPTION
MECHANICAL CLUTCH LEVERS
0613-0206
Chrome
0613-0207
Black
0613-0210
Smooth chrome
0613-0211
Smooth black
SUG. RETAIL
$64.95
64.95
64.95
64.95
PART #
DESCRIPTION
BRAKE LEVERS
0614-0165
Chrome
0614-0166
Black
0614-0167
Smooth chrome
0614-0168
Smooth black
SUG. RETAIL
$64.95
64.95
64.95
64.95
SECTION
0610-0103
12
WINDSHIELDS
0612-0107
0610-0105
TOURING
0610-0093
0610-0090
0610-0106
LUGGAGE
0610-0098
0610-0094
SEATS &
SISSY BARS
BILLET HANDLEBAR CONTROLS
•Hydraulic brake master cylinders feature a built-in brake light switch and are
available with 9/16” or 11/16” bore size; compatible with most stock and aftermarket four- and six-piston brake calipers
•Hydraulic clutch master cylinders are available in 11/16” bore size; include an adapter for mounting mirrors
•Can be used on most 11/4” handlebars
•Master cylinders include smooth reservoir covers; additional styles sold separately
•Mechanical clutch lever assemblies accept 87-09 style clutch cables
•Available with chrome or black anodized finish
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
CLUTCH SIDE CONTROLS
RESERVOIR COVERS (CONT)
11/16” bore master cylinder assembly, chrome
0610-0103
Ball-milled, chrome
$385.95 0610-0092
11/16” bore master cylinder assembly, black
Ball-milled, black
385.95 0610-0093
0610-0107
Iron Cross, chrome
0612-0106
Mechanical clutch lever assembly, chrome
275.95 0610-0094
Iron Cross, black
0612-0107
Mechanical clutch lever assembly, black
275.95 0610-0095
0610-0098
Flame, chrome
BRAKE SIDE CONTROLS
Flame, black
0610-0105
385.95 0610-0099
0610-0106
385.95 REPLACEMENT LEVERS
Repl. hydraulic brake or clutch lever, chrome
0610-0104
385.95 0614-0160
Repl. hydraulic brake or clutch lever, black
0610-0108
385.95 0614-0161
0613-0199
Repl. cable clutch lever, chrome
RESERVOIR COVERS
Repl. cable clutch lever, black
0610-0090
Repl. smooth, chrome
44.95 0613-0200
0610-0091
Repl. smooth, black
44.95
EXHAUST
SUG. RETAIL
$44.95
44.95
44.95
44.95
44.95
44.95
83.95
83.95
83.95
83.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
CUSTOM SWITCH HOUSINGS
DS-290703
DS-290707
HANDLEBAR SWITCH HOUSINGS
•Chromed replacement handlebar
switch housings
•Each is made of die-cast aluminum and is highly chromed
•Switches available separately; see ELECTRICAL section
PART #
DESCRIPTION
SUG. RETAIL
FOR 73-81 FX AND XL AND 72-81 FL MODELS
DS-290703
Switch housing (two required);
repl. OEM #71539-73B
$14.95
DS-290707
Horizontal switch housing; repl. OEM #71539-72
17.95
0616-0051
HANDLEBARS,
CONTROLS
& MIRRORS
•Switch housings look like they were
machined from a solid piece of billet, but
are actually die-cast aluminum highly
polished and chrome plated
•Accept all the stock or aftermarket
switches and buttons
•Include chrome-plated socket-head screws
•Sold in pairs
PART #
DS-290700
DESCRIPTION
For 72-81 H-D
CABLES
SUG. RETAIL
$29.95
BRAKES
7807-0030
TANKS &
OIL FILTERS
1808-0526
DASHES
& GAUGES
0616-0052
FRAMES,
SUSPENSION
& FENDERS
1808-0528
FLTR/FLHT SWITCH HOUSINGS
FOOTRESTS
& LICENSE
PLATE FRAMES
•Chrome-plated die-cast aluminum
•Designed to work with OEM radio or radio/
cruise control switches, include provisions for
neutral/starter lockout switch
•Sold each
FOR 96-07 FLTR/FLHT MODELS
PART #
DESCRIPTION
UPPER SWITCH HOUSING
0610-0004
Top left
0616-0001
Top right
LOWER RADIO SWITCH HOUSINGS
0616-0051
Left side; repl. OEM #71558-96A
1808-0526
Right side; repl. OEM #71553-96
LOWER RADIO/CRUISE SWITCH HOUSINGS
0616-0052
Left side; repl. OEM #71594-96A
1808-0528
Right side; repl. OEM #71595-96
SUG. RETAIL
$15.95
15.95
16.95
16.95
16.95
16.95
HANDLEBAR CONTROL
COVER KITS
7807-0031
TIRES,
TUBES &
WHEELS
•Chrome control cover kits offer
finishing touches
•Kits include master cylinder cover,
replacement clamp halves, clutch
perch and installation hardware
HARDWARE,
CHEMICALS
& TOOLS
PART #
DESCRIPTION
SUG. RETAIL
FOR ALL 96-08 H-D MODELS (EXCEPT 08 DRESSERS, V-ROD, 04-08 XL)
7807-0030
Dual-disc kit
$79.95
7807-0031
Single-disc
79.95
COVERS,
SECURITY
& GENERAL
747
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
SLOTTED WIDE
BLADE LEVER SETS
0610-0142
DS-273138
•Unique design exclusively from
Drag Specialties
•Strong, die-cast aluminum
with CNC-machined slots
•Includes anti-rattle clip and clutch lever
pivot bushings (except DS-273143)
•Sold in pairs unless noted
PART #
0610-0141
0610-0142
DESCRIPTION
For 07-09 Big Twin, 96-03 XL (except 08-09
FLHT/FLHR/FLTR/FLHX), chrome
For 07-09 Big Twin, 96-03 XL (except 08-09
FLHT/FLHR/FLTR/FLHX), black
SUG. RETAIL
$39.95
32.95
PART #
DS-273138
0610-0143
0610-0144
0613-0026
DESCRIPTION
For 82-95 models, chrome
Repl. clutch lever for 0610-0141 (ea.)
Repl. brake lever for 0610-0141 (ea.)
SUG. RETAIL
$34.95
21.95
21.95
21.95
EXHAUST
DS-273145A
FUEL/AIR
SYSTEMS
0610-0185
0610-0046
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DS-273139
WIDE BLADE LEVER SETS
•Top-quality lever sets resemble the late-style wide, flat design
•Constructed of lightweight aluminum, then chromed
•96-09 levers also available with a matte black, powder-coated finish to match OEM controls
•Levers are compatible with OEM lever perches; sold in pairs unless noted
PART #
DESCRIPTION
SUG. RETAIL
FOR 08-09 FLHT/FLHR/FLTR/FLHX
0610-0185
Chrome
$49.95
0610-0188
Black
46.95
0610-0186
29.95
0610-0187
29.95
0610-0189
27.95
0610-0190
27.95
FOR 96-09 BIG TWIN, 96-03 XL (EXCEPT 08-09 FLHT/FLHR/FLTR/FLHX)
0610-0126
Chrome
34.95
0610-0128
Black
24.95
0613-0201
19.95
0614-0162
19.95
FOR 07-09 XL
0610-0127
Chrome
34.95
PART #
DESCRIPTION
FOR 07-09 XL (CONT)
0610-0129
Black
0613-0202
0614-0163
FOR 04-06 XL
0610-0046
Chrome
0610-0129
Black
FOR 82-95 MODELS
DS-273145A
Chrome
0613-0030
Repl. brake lever for DS-273145A (ea.)
0613-0031
Repl. clutch lever for DS-273145A (ea.)
FOR 72-81 MODELS
DS-273139
Chrome
SUG. RETAIL
$24.95
19.95
19.95
32.95
24.95
24.95
21.95
21.95
24.95
DS-273960
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
748
0610-0008
DS-273904
DS-273903
COMFORT GRIP™ LEVERS
•Chrome-finished lightweight aluminum clutch and brake levers feature an offset
in the lever for easy operation
•82-95 H-D models include anti-rattle clips and clutch lever bushing
PART #
DESCRIPTION
SUG. RETAIL
DS-273960 Clutch/brake lever set for 82-95 H-D models; repl. OEM #s
45016-82, 45064-82, 45017-82 and 45062-82
$24.95
DS-273904 Clutch/brake lever for all 65-81 H-D clutch controls or brake
controls on 65-71 FL, 71-72 FX and 65-72 XL models;
repl. OEM #45024-65A (ea.)
9.95
DS-273903 Hydraulic brake lever for all 72-81 FL and 73-81 FX and XL
models; repl. OEM #45016-72
9.95
SKULL LEVER SET
•Lightweight chrome aluminum
levers feature detailed skulls
on the lever ends
•For use with OEM-style controls
•Sold in pairs
PART #
0610-0145
0610-0008
Skull
detail
DESCRIPTION
For 96-09 OEM-style controls
(except 04-09 XL, 08-09 Dressers)
For 82-95 OEM-style controls
SUG.
RETAIL
$39.95
28.95
SECTION
12
WINDSHIELDS
DS-273896
TOURING
STANDARD
HYDRAULIC
BRAKE LEVERS
STANDARD
CLUTCH/
BRAKE LEVERS
•Available in polished
or chrome finish
•Fit Harley clutch
controls or brake controls
PART #
DESCRIPTION
SUG. RETAIL
FOR 65-71 FL, 71-72 FX AND 65-72
XL MODELS; REPL. OEM #45024-65A
DS-273899
Chrome
$9.95
DS-273900
Polished
7.95
PART #
DESCRIPTION
FOR ALL 72-81 FL, 73-81 FX AND
XL MODELS; REPL. OEM #45016-72
DS-273902
Chrome
DS-273901
Polished
CLUTCH LEVER
ASSEMBLY
DS-273899
DS-273902
SUG. RETAIL
$9.95
7.95
LUGGAGE
•Complete 3/8” cable
opening clutch lever
assembly in either chrome
or polished aluminum
•Includes cable end bushing
SEATS &
SISSY BARS
SUG.
RETAIL
PART #
DESCRIPTION
FOR 68-71 FL AND 71-72 XL,
FX MODELS; REPL. OEM #38608-68
DS-273894
Chrome
DS-273896
Polished
$12.95
9.95
CLUTCH
LEVER ASSEMBLY
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
•Complete clutch
lever assembly
•Available in chrome
or polished finish
•7/16” cable opening
CHROME CLUTCH
LEVER ASSEMBLY
DS-273895
PART #
DESCRIPTION
FOR L65-70 XL; REPL. OEM #38604-65A
DS-273893
Chrome
DS-273895
Polished
SUG. RETAIL
$12.95
9.95
TRANSMISSION
& DRIVELINE
•Comes complete with lever
bracket, lever, pivot pin
and anchor pin
PART #
0612-0072
DESCRIPTION
For 73-81 models
SUG. RETAIL
$33.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
TRIGGER LEVERS
STEALTH SERIES
CLUTCH AND
BRAKE LEVERS
•One-of-a-kind, quality clutch and brake levers
•Chrome levers are designed with our exclusive cutout
to match the Drag-Ness Stealth Mirror or shift levers
•Include anti-rattle clip and clutch lever pivot bushings
•Sold in pairs
PART #
DS-273150
DESCRIPTION
For 82-95 H-D models (pr.)
SUG. RETAIL
$28.95
•Design allows the forefinger to get a real grip,
which makes it easier and more comfortable
to pull the lever
•Lever backside is dished
•Hand falls naturally into place
•Ideal for riders with smaller hands
•Sold in sets of one clutch and one brake lever
PART #
DESCRIPTION
SUG. RETAIL
0610-0191 For 96-09 models w/ cable clutch
(except 08-09 FLHT/FLHR/FLTR/FLHX and 04-09 XL)
$59.95
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
0610-0048
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
BOSS BLADES
•Wide, deep-dished levers provide the shortest
reach possible
•Still allow full necessary range of lever motion
for clutch and brake operation
•Smooth, sculpted finish with chiseled ends for style
PART #
DESCRIPTION
SUG. RETAIL
0610-0048 For 02-05 V-Rod and 99-06 Twin Cam w/ H-D
hydraulic clutch
$59.95
0617-0067 For 96-09 models w/ cable clutch
(except 08-09 FLHT, FLHR, FLTR, FLHX and 04-09 XL)
59.95
HARDWARE,
CHEMICALS
& TOOLS
SILHOUETTE LEVERS
•Beautifully sculpted set of levers adds a unique
accent to your bike
•Very comfortable on the hands
PART #
DESCRIPTION
0617-0068 For 97-09 H-D models w/ cable-operated clutch
(except 04-09 XL, 08-09 FLHT/FLHR/FLTR/FLHX)
SUG. RETAIL
$79.95
COVERS,
SECURITY
& GENERAL
749
SECTION
12
0610-0077
SKELETAL CLUTCH/BRAKE LEVER SET
•Skeleton finger clutch and brake lever set
•Manufactured from 356 high-quality aluminum and heat treated to T6
•Chrome plated
•Sold in pairs
WINDSHIELDS
TOURING
0610-0078
LUGGAGE
PART #
0610-0077
0610-0078
SUG. RETAIL
$211.95
211.95
CLUTCH AND
BRAKE LEVERS
0613-0097
EXHAUST
•Chrome-plated
billet aluminum
•Fully rounded along the finger
grooves for comfort
•For models with OEM-style controls
•Sold each
FUEL/AIR
SYSTEMS
PART #
DESCRIPTION
BRAKE LEVERS
DS-290002 For 96-09 models (except 04-09 XL and 08-09 Dressers)
DS-290001 For 82-95 models
SEATS &
SISSY BARS
DESCRIPTION
For 96-06 Big Twin
For 82-95 Big Twin
DS-290002
DS-290001
SUG.
RETAIL
$59.95
59.95
PART #
DESCRIPTION
CLUTCH LEVERS
0613-0203 For 96-09 models (except 04-09 XL and 08-09 Dressers)
0613-0097 For 03-06 VRSC models
SUG.
RETAIL
$59.95
59.95
DS-273961
ENGINE
0614-0171
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
0610-0109
0610-0110
DS-273962
BILLET CLUTCH AND BRAKE LEVERS
•Chrome billet levers with rubber-inlay strips
•3/4” wide levers
•Sold each
PRO-BLADE BILLET LEVERS
•Top-quality construction levers with
serious attitude
•Available with chrome or black anodized finish
•Sold in pairs
PART #
DESCRIPTION
FOR ALL 96-06 MODELS (EXCEPT 04-06 XL)
0610-0109
Black
0610-0110
Chrome
SUG. RETAIL
$165.95
165.95
PART #
CLUTCH LEVERS
DS-273961
BRAKE LEVERS
0614-0171
DS-273962
DESCRIPTION
For 96-06 models; chrome w/ rubber
$81.95
81.95
81.95
FOLDING
ROLL-A-CLICK
LEVERS
0614-0279
•Share all the features
of original Roll-A-Click levers, but fold to help prevent breaking
if bike is tipped over
•Heavy-duty ball-spring detent hinge
•Replaceable lever tips
•Available in gray or black
0613-0317
CLUTCH LEVERS
BRAKE LEVERS
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
750
SUG. RETAIL
SUG.
PART #
DESCRIPTION
RETAIL
FOR 96-98 S1, 97-02 M2, 00-02 X1, 97-01 S3
0614-0185
Gray
$129.95
0614-0280
Black
129.95
PART #
DESCRIPTION
FOR 03-09 XB9/12
0614-0186
Gray
0614-0279
Black
ROLL-A-CLICK
LEVERS
SUG.
RETAIL
$129.95
129.95
PART #
DESCRIPTION
FOR 96-98 S1, 97-02 M2, 00-02 X1,
97-01 S3, 03-09 XB9/12
0613-0237
Gray
0613-0317
Black
SUG. RETAIL
$129.95
129.95
0614-0071
•A truly on-the-fly
position adjustable lever,
designed for OEM-style master cylinders
•Miniature clicker lever controls a roller cam
assembly, giving riders the ability to manipulate lever
position while riding
•Brake fade and clutch adjustments can be tuned in with ease
•6061 T-6 aluminum CNC-machined billet construction
•Available in standard and shorty length with gray, black
or gold hard-anodized finish
0613-0119
0614-0120
CLUTCH LEVERS
BRAKE LEVERS
PART #
DESCRIPTION
SUG. RETAIL
FOR 96-98 S1, 97-02 M2, 00-02 X1, 97-01 S3
0614-0071 Gray, standard length
$109.95
0614-0107 Gray, shorty
109.95
0614-0087 Black, standard length
109.95
0614-0127 Black, shorty
109.95
0614-0095 Gold, standard length
109.95
0614-0117 Gold, shorty
109.95
PART #
DESCRIPTION
FOR 03-09 XB9/12
SUG. RETAIL
$109.95
109.95
109.95
109.95
109.95
109.95
PART #
DESCRIPTION
FOR 96-98 S1, 97-02 M2, 00-02 X1,
97-01 S3, 03-09 XB9/12
SUG. RETAIL
$109.95
109.95
109.95
109.95
109.95
109.95
SECTION
12
WINDSHIELDS
FRINGED LEATHER
LEVER COVERS
0610-0133
0610-0134
CLUTCH AND BRAKE LEVER SETS
•CNC machined from billet aluminum
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
FOR PERFORMANCE MACHINE CONTOUR HYDRAULIC HAND CONTROLS
0610-0133
Black
$191.95
0610-0134
Chrome
191.95
•Black leather lever covers feature
12” long fringe
•Fit any of the larger, cruiser-style
replacement levers
•Covers are a good match with our grip
covers PART #s DS-243060 and DS-243061
PART #
DS-243062
DS-243063
DESCRIPTION
Fringed leather lever covers for up to 95
Fringed leather lever covers for 96-08 OEM
wide levers and aftermarket levers
TOURING
LUGGAGE
SUG. RETAIL
$11.95
12.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
LEATHER
LEVER COVERS
ENGINE
•Handcrafted, black
leather clutch and
brake lever covers come with laces
•Fit the larger size, stock or custom
cruiser-style levers
•Set includes cover, laces, beads and instructions
•Match our leather grip covers perfectly
•Fit standard levers only, not wide-blade levers
LEATHER LEVER FRINGE
•Leather, lace-up lever covers for style
and comfort
•Measure 12” L
•Sold in pairs
•Comfortable black foam
grips reduce hand-slip,
vibration and fatigue
•Fit most brake and clutch levers
•Sold in pairs
PART #
DS-243056
PART #
0618-0001
PART #
0630-0383
DESCRIPTION
Lever covers
SUG. RETAIL
$12.95
DESCRIPTION
Leather lever fringe
FOAM
LEVER GRIPS
SUG. RETAIL
$16.95
DESCRIPTION
Foam lever grips
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
SUG. RETAIL
$5.95
ELECTRICAL
CLUTCH AND
BRAKE CONTROLS
CLAMP HALVES
•Faithful reproduction of the
original clamp halves that
secure the handlebar master
cylinder or clutch control
•Sold each
DS-290694
HANDLEBARS,
CONTROLS
& MIRRORS
DS-290697
PART #
DESCRIPTION
FOR 96-09 MODELS (EXCEPT 08-09 DRESSERS,
04-09 XL); REPL. OEM #45044-96
DS-290694
Black clamp
DS-290697
Chrome clamp
FOR 82-95 MODELS; REPL. OEM #45044-82
DS-290698
Chrome clamp
DS-290699
Black clamp
DS-190720
Chrome socket-head screws
for halves (4-pk.)
SUG. RETAIL
14.95
10.95
16.95
DS-273897
•Made of die-cast aluminum
•Available in black or chrome
PART #
DESCRIPTION
SUG. RETAIL
FOR 96-09 MODELS (EXCEPT 08-09
DRESSERS, 04-09 XL); REPL. OEM #38608-96
DS-290688
Black
$13.95
DS-290689
Chrome
19.95
CLUTCH LEVER BRACKET
•Chrome die-cast aluminum
•Sold each
PART #
DESCRIPTION
DS-290702 For 73-81 FX/XL,
72-81 FL; repl.
OEM #38608-73
•Replacement pin kit
•Sold in packs of 10
DESCRIPTION
For 82-09 models (except 04-06 XL);
repl. OEM #s 11143 and 45032-82
For 65-81 models; repl. OEM #s
45031-65 and 11036
SUG. RETAIL
$1.95
1.95
PIVOT PIN
BUSHINGS
$12.95
DS-240245
PART #
DESCRIPTION
SUG. RETAIL
FOR 65-81 FX, FL AND XL CLUTCH LEVERS; 65-72 FX, FL AND XL BRAKE LEVERS
DS-240245
Anchor pin bushings (12-pk.)
$1.95 (ea.)
DS-240246
Anchor pin and bushings (ea.); repl. OEM #s
45036-68 and 45039-68
3.95
SUG.
PART #
DESCRIPTION
RETAIL
DS-273965 For 92-09 Big Twin and 93-03 XL model;
repl. OEM #45423-92/96 (10-pk.)
$1.95 (ea.)
•Chromed socket-head pivot pins are an
inexpensive way to add unique looks to the
clutch and brake lever perches
•Utilize OEM retaining rings
PART #
DESCRIPTION
DS-273891 For 82-09 Harley models (except 04-09 XL, 08-09 Dressers);
repl. OEM #45032-82
TANKS &
OIL FILTERS
DASHES
& GAUGES
CUSTOM SOCKET-HEAD PIVOT PINS
•Plastic bushings replace
those on clutch
and brake levers
BRAKES
SUG.
RETAIL
CLUTCH/BRAKE CABLE
ANCHOR PINS
•Replacement cable anchor pins and
plastic bushings for early-style clutch
and brake levers
•PART # DS-240245 sold to consumer
each, sold to dealer in 12-pack; PART #
DS-242046 sold each
PIVOT PIN/CLIP KITS
DS-273897
CABLES
DS-290688
CLUTCH LEVER BRACKETS
$6.95
12.95
DS-273898
PART #
DS-273898
LIGHTING
DS-290689
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$12.95
COVERS,
SECURITY
& GENERAL
751
SECTION
12
WINDSHIELDS
7807-0020
TOURING
LUGGAGE
FLAMED GRIPS
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
•Rubber grips with
billet aluminum chrome flame accents
•Sold in pairs; includes throttle sleeve
0630-0478
DS-243140
0630-0477
PART #
0630-0268
BILLET GRIPS
•Machined from billet
aluminum with
a chrome-plated or black
powdercoat finish
•Made in the U.S.A
DESCRIPTION
Wave
Flame
SUG. RETAIL
$114.95
139.95
PART #
BLACK
0630-0477
0630-0478
DESCRIPTION
Wave
Flame
$105.95
131.95
DS-243255
GRIPS
DS-243256
CABLES
SKULL GRIPS
•Available with chrome skull end caps with black or red eyes
•Feature a foam cushion under the soft black leather covers
PART #
DESCRIPTION
FOR 73-09 MODELS (EXCEPT 08-09 DRESSERS AND AIR-CONTROLED FORKS)
DS-243255
Grips w/ plain eyes (throttle sleeve included)
DS-243256
Grips w/ red eyes (throttle sleeve not included)
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
$84.95
SUG. RETAIL
ELECTRICAL
HANDLEBARS,
CONTROLS
& MIRRORS
SUG.
RETAIL
FOR 73-09 MODELS (EXCEPT 08-09 FLHT/FLHR/FLTR/FLHX AND THOSE WITH AIR-ASSISTED FORKS)
PART #
CHROME
DS-243140
7807-0020
GASKETS
& SEALS
LIGHTING
DESCRIPTION
For 73-09 models (except
08-09 Dressers and those
with air-assisted forks)
SUG. RETAIL
$89.95
74.95
•Features polished and chrome-plated
die-cast construction
•Custom rubber insets for all-day riding
•Left side grip features set-screw attachment
•Matching shift peg PART #1603-0053 available
separately; see FOOTRESTS & LICENSE PLATE
FRAMES section
•Matching foot pegs PART #1620-0377 available
separately; see FOOTRESTS & LICENSE PLATE
FRAMES section
PART #
DESCRIPTION
SUG. RETAIL
0630-0372
For 73-09 models
(except 08-09 Dressers
and those with
air-controlled forks)
$64.95
CHROME O-RING
DESIGN GRIPS
•High-quality chrome plating gives
that great custom look
•Rubber insert and O-ring
design help dampen vibration
•Dual-cable throttle sleeve
is installed
•Sold in pairs
GLADIATOR GRIPS
•Billet aluminum construction
witha chrome-plated finish
•Rubber inserts for comfort on
long rides
•Sold in pairs
PART #
0630-0427
DESCRIPTION
For 73-09 models (except 08-09 Dressers
and those with air-assisted forks)
SUG. RETAIL
PART #
DS-243186
$72.95
DESCRIPTION
For all 73-09 models (except those w/
air-assisted forks, 08-09 Dressers)
SUG. RETAIL
$49.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
752
RUBBER GRIPS
WITH ACCENT
RINGS AND END CAPS
DIAMOND-PLATE
LEATHER GRIPS
•Soft, pliable rubber grips
•End caps and detail rings are
chrome-plated billet aluminum
•Throttle sleeve installed
•Soft leather grips with a non-slip
diamond-plate look pattern
•Throttle sleeve not included
PART #
0610-0021
DESCRIPTION
and those w/ air-assisted forks)
SUG. RETAIL
$47.95
PART #
DS-243112
DESCRIPTION
For 73-09 models (except 08-09 Dressers and
those with air-controlled forks)
SUG. RETAIL
$29.95
SECTION
12
WINDSHIELDS
TOURING
DS-243122
DS-243125
LUGGAGE
SUNDANCE® GRIPS
•Dense black foam grips are firmer and last longer
than the competition’s
•Softer-than-stock grips feature molded rubber
sleeves and luxurious, replaceable neoprene covers
•Resistant to perspiration, gas and oil
•Throttle sleeve comes in place, so there are no more installation hassles
•Replacement foam kits are also available
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
DS-243122 Sundance grips w/ throttle sleeve for 81-09 HD (except
08-09 Dressers and air-assisted forks) (dual-cable throttle)
$23.95
DS-243125 Repl. foam kit
7.95
SEATS &
SISSY BARS
TEXTURED BLACK
RUBBER GRIPS
•Feature a unique textured
layer of thin black rubber over a foam sleeve
•Chrome end caps and throttle sleeve included
•Sold in pairs
PART #
DS-243105
EXHAUST
SUG.
RETAIL
DESCRIPTION
and those w/ air-assisted forks)
$23.95
DS-243103
REPLACEMENT OEM-STYLE RUBBER GRIPS
ENGINE
0630-0463
•Come with throttle sleeve installed for dual- or
single-cable applications
•Sold in pairs
NOTE: For listed models except those with air reservoir in handlebars.
PART #
0630-0463
0630-0373
DS-243103
DS-243102
FUEL/AIR
SYSTEMS
DESCRIPTION
For 08-09 FLHT/FLHR/FLTR/FLHX
For 04-09 XL, 06-09 FXDL w/ reduced dia. grips and dual-throttle sleeve
For L81-09 Big Twin and L81-09 XL models style rubber grips w/ dualthrottle sleeve (except 08-09 Dressers and those w/ air assisted forks)
For 73-E81 Big Twin and XL models style rubber grips w/ singlethrottle sleeve and chrome end plugs
TRANSMISSION
& DRIVELINE
SUG.
RETAIL
$15.95
9.95
9.95
GASKETS
& SEALS
DS-243102
11.95
ELECTRICAL
LIGHTING
0630-0374
CONTOUR
RENTHAL
WRAPPED
GRIPS
•Achieve control nirvana
•Wrapped in genuine Renthal rubber
•Available in chrome or black anodized finish
•Sold in pairs
•Replacement grip wrap also available
PART #
DESCRIPTION
FOR 08-09 FLHT, FLHR, FLHX, FLTR MODELS
0630-0542
Chrome grips
0630-0543
Black anodized grips
FOR 82-09 DUAL CABLE MODELS (EXCEPT 08-09 DRESSERS)
0630-0374
Chrome grips
0630-0375
Black anodized grips
0630-0376
Repl. grip wrap (ea.)
HANDLEBARS,
CONTROLS
& MIRRORS
0630-0479
0630-0375
CABLES
TRACKER GRIPS
SUG. RETAIL
$139.95
139.95
99.95
99.95
14.95
•Machined from billet aluminum
•Choice of chrome or Contrast Cut™ finish
•Contrast Cut™ grips start with a black anodized
finish that is then re-cut to open up the design
•Wrapped in genuine Renthal™
brand rubber grip material
•Sold in pairs
PART #
DESCRIPTION
FOR ALL 82-09 MODELS (EXCEPT 08-09 DRESSERS)
0630-0479
Chrome
0630-0480
Contrast Cut™
0630-0480
SUG. RETAIL
$119.95
119.95
0630-0184
0630-0182
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
PREMIUM ISO™-GRIPS
ISO™-FLAME GRIPS
•Feature a unique flamed pattern in the soft raised
rubber pads
•Maltese Cross emblazoned end cap
•Knurled trim ring adds attitude
•Accepts the ISO™-Throttle Boss
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0630-0204 For 82-09 models (except
08-09 FLHT/FLHR/FLTR/FLHX)
w/ dual cable throttle bodies
$69.95
•The ultimate in comfort and style
•Combines the state-of-the-art vibration-absorbing properties of our standard ISO™-Grips
with the fatigue-reducing comfort of our ISO™ Throttle Boss
•Grips have removable end caps so they can be used with air reservoir handlebars
PART #
DESCRIPTION
SUG. RETAIL
FOR 82-09 MODELS (EXCEPT 08-09 FLHT/FLHR/FLTR/FLHX)
W/ DUAL CABLE THROTTLE BODIES
0630-0182
Grips w/ chrome accents
$79.95
0630-0184
Grips w/ black accents
79.95
0630-0453
Grips w/ chrome accents
79.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
753
SECTION
12
DS-243208
WINDSHIELDS
TOURING
ISO™-GRIPS
DS-243209
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
DS-243209
PILOT™ GRIPS
•Raised rubber pads offer
a comfortable grip area
•Chrome body adds a subtle accent to other accessories
•Sold in pairs
PART #
DESCRIPTION
DS-243208
Pilot Grips
DS-243209
Pilot Grips w/ Throttle Boss
0630-0454
Pilot Grips
SUG. RETAIL
$59.95
69.95
59.95
•Styled to match the popular
ISO™-Pegs
•Dampen handlebar vibration while
providing a sure grip
•Available in all chrome or with red,
blue or black accent rings
•Readily accept the ISO™-Throttle
DS-243190
Boss PART #DS-241194
(available separately)
•Sold in pairs
PART #
DESCRIPTION
DS-243190
Chrome
DS-243191
Chrome w/ red accent
DS-243192
Chrome w/ blue accent
DS-243193
Chrome w/ black accent
0630-0452
Chrome
SUG. RETAIL
$69.95
69.95
69.95
69.95
69.95
ENGINE
TRANSMISSION
& DRIVELINE
0630-0484
GASKETS
& SEALS
0630-0483
0630-0387
0630-0054
DS-243146
ELECTRICAL
0630-0269
LIGHTING
DS-243162
DS-243145
DS-243161
HANDLEBARS,
CONTROLS
& MIRRORS
DS-243164
DS-243133
CABLES
DS-243135
DS-243132
0630-0399
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
754
NESS-TECH® GRIPS
•The world’s ultimate handgrips from Arlen Ness are
machined from 6061 T-6 billet aluminum
•Roller bearing is pressed into the grip,
allowing smoother turning and less “stiction”
•Available in chrome or black anodized
•Sold in pairs
NOTE: PART #’s 0630-0054 and DS-243187 are
die-cast and do not feature roller bearing design.
SUG.
REPLACEMENT
PART #
DESCRIPTION
RETAIL
BANDS
FOR 73-09 SINGLE OR DUAL THROTTLE (EXCEPT 08-09 DRESSER)
0630-0483
Deep cut, chrome
$151.95
0630-0484
Deep cut, black
151.95
0630-0054
Torpedo
110.95
0630-0387
Retro
131.95
DS-243146 Flatband
133.95
DS-243137 (10-pk.)
DS-243145 Twister
133.95
0630-0269
Twister, black
145.95
DS-243161 Diamond flatband
127.95
DS-243162 Diamond twister
131.95
DS-243164 Stepped
120.95
DS-243132 Grooved
133.95
DS-243133 Knurled
133.95
DS-243137 (10-pk.)
0630-0399
Knurled, flare tip
131.95
DS-243135 Flamed
133.95
0630-0302
Rocket
133.95
-
DS-243188
0630-0302
SUG.
RETAIL
$12.95
12.95
-
DS-243187
SUG.
REPLACEMENT
SUG.
PART #
DESCRIPTION
RETAIL
BANDS
RETAIL
FOR 73-09 SINGLE OR DUAL THROTTLE (EXCEPT 08-09 DRESSER) (CONT)
DS-243188 10-band
$133.95
DS-241154 (20-pk.) $16.95
DS-243187 Horizontal rubber
(alternative grips)
82.95
FOR 08-09 FLHT, FLHR, FLHX, FLTR MODELS
0630-0485
Deep cut, chrome
157.95
0630-0486
Deep cut, black
157.95
0630-0401
Torpedo
110.95
0630-0405
Retro
131.95
0630-0406
Diamond flatband
133.95
0630-0404
Knurled, flare tip
131.95
0630-0402
Flamed
133.95
0630-0403
Rocket
133.95
0630-0400
Horizontal rubber
(alternative grips)
102.95
-
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
0630-0447
0630-0445
0630-0448
0630-0446
EXHAUST
BILLET GRIPS
•Machined from 6061 T-6 billet aluminum
•Roller bearing is pressed into the grip, allowing smoother turning and less “stiction”
•Choose from chrome or black finish
•Sold in pairs
PART #
FOR 73-09 SINGLE
1806-1100
0630-0388
DS-241152
0630-0301
DESCRIPTION
SUG. RETAIL
OR DUAL THROTTLE (EXCEPT 08-09 DRESSERS)
W/ oval holes, chrome
$149.95
W/ oval holes, black
149.95
W/ round holes, chrome
149.95
W/ round holes, black
149.95
PART #
DESCRIPTION
FOR 08-09 FLHT/FLHR/FLHX/FLTR MODELS
0630-0447
W/ oval holes, chrome
0630-0448
W/ oval holes, black
0630-0445
W/ round holes, chrome
0630-0446
W/ round holes, black
FUEL/AIR
SYSTEMS
SUG. RETAIL
ENGINE
$149.95
149.95
149.95
149.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0630-0309
ELECTRICAL
LIGHTING
0630-0308
0630-0310
0630-0028
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
ELITE CHROME
BILLET GRIPS
•Manufactured from
6061 T-6 aluminum
•Dual cable design
•Sold in pairs
0630-0311
BRAKES
0630-0377
0630-0378
PART #
DESCRIPTION
SUG. RETAIL
FOR 82-09 MODELS (EXCEPT THOSE WITH ELECTRONIC THROTTLE
CONTROLS AND AIR RESERVOIR IN HANDLEBARS)
0630-0028
Gothic style
$167.95
0630-0308
Bullet X-factor
167.95
0630-0309
Jet
167.95
0630-0310
Knurled diamond
167.95
0630-0311
X-factor
167.95
PART #
DESCRIPTION
SUG. RETAIL
FOR 82-09 MODELS (EXCEPT THOSE WITH ELECTRONIC THROTTLE
CONTROLS AND AIR RESERVOIR IN HANDLEBARS) (CONT)
1806-8502
Knurled/grooved
$136.95
DS-243178
Knurled
136.95
DS-243180
Rubber inserts
136.95
0630-0377
Knurled/notch
132.95
0630-0378
Bullet/drilled
167.95
0630-0482
SENSOR-TYPE KNURLED HAND GRIPS
•Fully CNC-machined billet construction with
precision diamond knurl pattern to insure
surprisingly comfortable grip performance
•Available with hard black or clear anodized finish
•Throttle side installs in minutes – simply remove
the two screws from the OEM throttle housing,
slide the old grip tube off, then slide our tube
onto the gear found on the sensor unit
•Sold in pairs
PART #
DESCRIPTION
FOR 08-09 FLHT, FLHR, FLHX AND FLTR MODELS
0630-0481
Black anodized
0630-0482
Clear anodized
0630-0481
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$119.95
119.95
COVERS,
SECURITY
& GENERAL
755
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
0630-0381
0630-0382
KNURLED HAND
GRIPS AND END CAPS
0634-0172
0634-0171
0634-0170
•All CNC-machined 6061 T-6 aluminum construction
with precise cut knurled finish diamond pattern
along the grip for a comfortable feel and function
•Add your choice of interchangeable end caps
that screw-on in seconds
•Grips have a polished and chromed flat-head
Allen socket screw if no end caps are used
•Grips and end caps are sold separately in pairs
0634-0174
0634-0173
FOR 82-09 DUAL-CABLE MODELS (EXCEPT 08-09 DRESSERS)
FUEL/AIR
SYSTEMS
ENGINE
PART #
GRIPS
0630-0381
0630-0382
END CAPS
0634-0170
0634-0171
DESCRIPTION
SUG. RETAIL
Raw machined aluminum finish
Hard black anodized finish
Chrome bullet
Chrome bell
LIGHTING
•Diameter 1/4” smaller
than other Joker grips
•Flared on the ends with
square-milled lines in the
body for better grip
PART #
DESCRIPTION
1806-4001
For 82-09 dual-cable
models (except
08-09 Dressers)
SUG. RETAIL
Chrome point
Chrome finned
Black eight ball
RADIAL GRIPS
BILLET GRIPS
ELECTRICAL
DESCRIPTION
$54.95
54.95
54.95
54.95
54.95
TRANSMISSION SLIMLINE
& DRIVELINE CHROME
GASKETS
& SEALS
$109.95
109.95
PART #
END CAPS (CONT)
0634-0172
0634-0173
0634-0174
SUG. RETAIL
$109.95
•Machined from solid billet,
then polished and
chrome plated
•Feature a comfortable
barrel shape for a more
natural feel
•Fit stock and most
aftermarket controls
•Sold in pairs
PART #
DESCRIPTION
0630-0192 For 82-09 dual-cable
models (except
08-09 Dressers)
DS-243405
SUG RETAIL
DS-243406
$109.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
756
CUSTOM RUBBER
RADIAL GRIPS
0630-0379
0630-0300
0630-0380
•Exclusive super-comfortable (soft compound) Radial Rubber
design for a cool retro look and comfort on long-distance rides
•Easy installation
•CNC-machined aluminum trim caps (sold separately)
easily plug into the grip ends for a really cool look
•Sold in pairs; for 1” diameter bars
0634-0190
•Sensor-type throttle tube PART #0632-0335 required for installation
on 08-09 Dresser models
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
FOR 82-09 DUAL-CABLE MODELS
(EXCEPT 08-09 DRESSERS)
(EXCEPT 08-09 DRESSERS) (CONT)
0630-0300
Black grips
$22.95 0630-0380
White grips
$22.95
0630-0379
Red grips
22.95 0634-0190
Raw finish trim caps
9.95
SERIES 2000 CHROME GRIPS
WITH MARKER LIGHTS
•Available with a smooth or ball-milled design
•Grips feature fully adjustable marker lights
with amber lens front and rear
•Lights are not DOT approved; recommended
for show or off-road use only
•Sold in pairs
•See pages 699-704 for replacement bulbs
PART #
DESCRIPTION
(EXCEPT 08-09 DRESSERS)
DS-243405
Ball-milled
DS-243406
Smooth
0630-0498
0630-0384
0630-0500
SUG. RETAIL
$249.95
249.95
0630-0503
GRIPS
•Machined from
billet aluminum
•Three styles available
to match footpegs or
forward controls
•Not for air-suspension models with air
valve in left grip
•Available with chrome or black
•Sold in pairs
DS-243171
PART #
DESCRIPTION
SUG. RETAIL
FOR 82-09 MODELS (EXCEPT 08-09 DRESSERS)
DS-243171
Wideband; chrome
$115.95
0630-0385
Wideband; black
115.95
DS-243172
Full rubber; chrome
115.95
0630-0384
Full rubber; black
116.95
DS-243175
Dovetail; chrome
115.95
0630-0386
Dovetail; black
115.95
DS-243175
PART #
DESCRIPTION
SUG. RETAIL
FOR 82-09 MODELS (EXCEPT 08-09 DRESSERS) (CONT)
0630-0499
Factor; chrome
$117.95
0630-0498
Factor; black
117.95
0630-0500
Multi-band; chrome
117.95
0630-0501
Multi-band; black
117.95
0630-0502
Ultra; chrome
117.95
0630-0503
Ultra; black
117.95
PART #
DESCRIPTION
REPLACEMENT PARTS
0630-0496
Full rubber grip repl.
for Full/Ultra grip
(set of 2)
0630-0497
Factor rubber ring repl.
(set of 2)
SUG. RETAIL
$30.95
11.95
SECTION
0630-0443
0630-0435
WINDSHIELDS
0630-0437
0630-0436
0630-0438
12
0630-0439
TOURING
LUGGAGE
0630-0428
0630-0430
0630-0444
SEATS &
SISSY BARS
0630-0431
0630-0440
GRIPS
•CNC-machined from billet
aluminum or brass
•Available in a variety of styles
and finishes
EXHAUST
FOR 82-09 DUAL-CABLE SYSTEMS (EXCEPT THOSE W/ AIR-ASSISTED FORKS AND ELECTRONIC THROTTLES)
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
ALUMINUM
ALUMINUM (CONT)
0630-0432
Hole Shot w/ knurl, chrome
$151.95 0630-0443
Vice w/ rubber, chrome
0630-0433
Hole Shot w/ knurl, black anodized
151.95 0630-0444
Vice w/ rubber, black anodized
0630-0434
Hole Shot w/ rubber, chrome
151.95 SOLID BRASS
0630-0435
Hole Shot w/ rubber, black anodized
151.95 0630-0428
Moto w/ knurl, polished
0630-0436
Moto w/ knurl, chrome
157.95 0630-0429
Moto w/ rubber, polished
0630-0437
Moto w/ knurl, black anodized
157.95 0630-0430
Vice w/ knurl, polished
0630-0438
Moto w/ rubber, chrome
157.95 0630-0431
Vice w/ rubber, polished
0630-0439
Moto w/ rubber, black anodized
157.95 REPLACEMENT RUBBER GRIP SLEEVES
0630-0441
Vice w/ knurl, chrome
151.95 0630-0440
Repl. injection-molded rubber grip sleeves (pr.)
0630-0442
Vice w/ knurl, black anodized
151.95
FUEL/AIR
SYSTEMS
SUG. RETAIL
$151.95
151.95
255.95
255.95
232.95
232.95
18.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
7805-2020
0630-0475
ENGINE
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
0630-0476
0630-0313
CABLES
0630-0205
GNARLY
KNURLED GRIPS
•Aggressive look and grip
with WCC machined logo
•Available in raw or black finish
•Will fit both single- and
dual-pull cable setups
•Will fit with stock HD controls
3-D GRIPS
•Billet grips feature unique designs milled right into the
grip ends
BRAKES
0630-0509
FOR 82-09 DUAL-CABLE SYSTEMS (EXCEPT 08-09 DRESSER)
PART #
DESCRIPTION
SUG. RETAIL
0630-0475
Raw
$199.95
0630-0476
Black
224.95
PART #
CHROME
7805-2020
0630-0312
DESCRIPTION
Maltese Cross
Skull
SUG. RETAIL
$193.95
193.95
PART #
DESCRIPTION
SUG. RETAIL
BLACK POWDER COAT
0630-0205 Chrome Maltese Cross
$193.95
0630-0313 Chrome Skull
193.95
0630-0509 Gold Maltese Cross
193.95
FOOTRESTS
& LICENSE
PLATE FRAMES
0630-0510
0630-0511
TIRES,
TUBES &
WHEELS
OLD
SKOOL GRIPS
•An “old skool” look with a couple of new twists
•Fit all 1” handlebars
•Available in chrome, brass or black
0630-0512
0630-0370
FOR 82-09 DUAL-CABLE SYSTEMS (EXCEPT 08-09 DRESSER AND MODELS WITH HANDLEBAR AIR RESERVOIR)
DESCRIPTION
Chrome
Brass
Black
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
0630-0369
PART #
HOUR GLASS
0630-0368
0630-0369
0630-0510
TANKS &
OIL FILTERS
SUG. RETAIL
$194.95
194.95
194.95
PART #
DESCRIPTION
HOUR GLASS (CONT)
0630-0511
Black backcut
CLASSIC
0630-0370
Chrome
SUG. RETAIL
$194.95
194.95
PART #
DESCRIPTION
CLASSIC (CONT)
0630-0371
Brass
0630-0512
Black anodized
ball milled
SUG. RETAIL
$194.95
194.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
757
SECTION
12
WINDSHIELDS
0630-0279
0630-0274
0630-0275
TOURING
LUGGAGE
SEATS &
SISSY BARS
BILLET GRIPS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
•Machined from 6061 T-6
billet aluminum
•Available in four distinct
designs with spike head ends
•Available in show chrome or black anodized finish
•Sold in pairs
0630-0282
FOR 82-09 MODELS (EXCEPT 08-09 DRESSERS AND THOSE WITH AIR RESERVOIR IN HANDLEBARS)
PART #
DESCRIPTION
SUG. RETAIL PART #
CHROME SPIKE HEAD GRIPS
BLACK SPIKE HEAD GRIPS
0630-0273
Smooth
$187.95 0630-0274
0630-0275
Ball-milled
187.95 0630-0276
0630-0279
Iron cross
187.95 0630-0280
0630-0281
Flames
187.95 0630-0282
GASKETS
& SEALS
ELECTRICAL
DESCRIPTION
Smooth
Ball-milled
Iron cross
Flames
SUG. RETAIL
$187.95
187.95
187.95
187.95
0630-0049
DS-223345
DS-243156
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CHROME BILLET GRIPS
•Available in millennium, grooved and contour designs
CABLES
BRAKES
PART #
DESCRIPTION
FOR 82-09 MODELS (EXCEPT 08-09 DRESSERS AND THOSE WITH AIR RESERVOIR IN HANDLEBARS)
DS-223345
Millennium
DS-243156
Grooved
0630-0049
Contour
SUG. RETAIL
$116.95
116.95
116.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
490000
FRAMES,
SUSPENSION
& FENDERS
490010
FOOTRESTS
& LICENSE
PLATE FRAMES CUSTOM
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
758
HANDLEBAR
GRIPS
•Chrome grips
with straight
or twisted
rubber designs
•Include
throttle sleeve
PART #
DESCRIPTION
FOR 82-09 MODELS (EXCEPT 08-09 DRESSERS AND THOSE WITH
AIR RESERVOIR IN HANDLEBARS)
490000
Straight rubber style
490010
Twisted rubber style
BILLET CRYSTAL GRIPS
SUG. RETAIL
•Spectacular looking; ergonomically designed for comfort
•Machined from billet aluminum, then show-chrome plated
$99.95
99.95
SUG.
PART #
DESCRIPTION
RETAIL
0630-0271 For 82-09 models (except 08-09 Dressers
and those w/ handlebar air reservoirs) $124.95
SECTION
12
WINDSHIELDS
0630-0041
0630-0039
0630-0045
HANDGRIPS
TOURING
•Update your stock grips with a set of 1.5”
diameter billet handgrips
•Available in three different styles
•Enhance the look of your bike and increase
comfort and control
•Can be used with stock or custom controls
LUGGAGE
PART #
DESCRIPTION
FOR USE WITH DUAL CABLE SYSTEMS
0630-0039
Smooth
0630-0042
Ball-milled
0630-0045
Comfort
FOR USE WITH INTERNAL THROTTLES
0630-0038
Smooth internal throttle
SUG. RETAIL
$149.95
149.95
149.95
139.95
0630-0306
PART #
DESCRIPTION
FOR USE WITH INTERNAL THROTTLES (CONT)
0630-0040
Smooth custom internal
0630-0041
Ball-milled internal throttle
0630-0043
Ball-milled custom internal
0630-0044
Comfort internal throttle
0630-0046
Comfort custom internal
SUG. RETAIL
$139.95
139.95
139.95
139.95
139.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
0630-0307
ALI BABA GRIPS
DEAD
END GRIPS
•Extra-long design
•Feature rounded ends
•Optional handlebar grip spacer available; see page 766
•U.S. patent #D546,162 S
PART #
DESCRIPTION
SUG. RETAIL
FOR 82-09 DUAL-CABLE SYSTEMS (EXCEPT 08-09 DRESSER AND THOSE WITH AIR-ASSISTED FORKS)
0630-0306
Ball-milled
$206.95
0630-0307
Flame
206.95
•Machined from a solid block
of aircraft aluminum, then
wrapped with a soft sheet of
black urethane
•Included rubber bands hide
the set screws that secure
the grip for a very
clean installation
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0630-0487 For 82-09 models (except
08-09 Dressers and those
$199.95
w/ air-assisted forks)
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
CUSTOM BILLET GRIPS
•Machined from solid aircraft aluminum,
then chrome plated
0630-0305
•Grip rubber is soft urethane
0630-0069
•Rubber grip cone spacer mounts between
the left grip and clutch to smooth the
transition from the grip to the lever
•Throttle coupler matches the left-side
grip spacer; will work with most
grips for stock throttle housing (utilizes
single-cable operation only)
0630-0068
PART #
DESCRIPTION
SUG. RETAIL
FOR 82-09 MODELS (EXCEPT 08-09 DRESSERS AND THOSE WITH AIR-ASSISTED FORKS)
0630-0305
Bullet grips (pr.)
$124.95
0630-0069
Rubber grip cone spacer
69.95
0630-0068
Throttle coupler (single cable)
79.95
FLOW GRIPS
•Billet aluminum with a chrome
finish makes for a great
addition to your bike
•Available in 1.25” or
1.50” diameters
•Keep the “Fatbar look” of
your bike continuing through
0630-0003
the entire bike
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0630-0002
For 11/4” bars
$151.95
0630-0003
For 11/2” bars
151.95
DS-243167
0630-0506
6030-0507
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
0630-0050
DIAMOND BILLET GRIPS
0630-0053
POLISHED BILLET GRIPS
•CNC-machined billet six-gun grips
•Available in ball-milled and scalloped style
with .44 magnum bullets in the end
•Sold in pairs; made in the U.S.A.
0630-0508
PART #
DESCRIPTION
FOR 82-09 DUAL-CABLE MODELS (EXCEPT 08-09 DRESSERS)
0630-0050
Ball-milled, chrome
0630-0053
Scalloped, chrome
0630-0506
Ball-milled, black anodized
0630-0507
Scalloped, black anodized
0630-0508
Rubber
SUG. RETAIL
$212.95
196.95
209.95
199.95
199.95
•High-quality chrome-plated
DS-243168
billet aluminum
•Two styles available
•Matching engine/transmission covers,
brake caliper insert, footpegs and toe
pegs are available separately
PART #
DESCRIPTION
SUG. RETAIL
DS-243167
Diamond II grips
$110.95
DS-243168
Diamond III grips
110.95
FOR 82-95 MODELS
DS-243183
Diamond III grips
110.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
759
SECTION
12
0630-0315
0630-0314
0630-0317
0630-0489
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
0630-0492
0630-0491
BILLET GRIPS
•6061 T-6 billet aluminum
construction with
a chrome-plated or black
anodized finish
•Precision CNC-machined
•Some grips feature UV-resistant
long-lasting rubber
•Sold in pairs
0630-0493
0630-0318
NOTE: For matching forward controls
and rear footpegs, see FOOTRESTS
& LICENSE PLATE FRAMES section.
PART #
DESCRIPTION
SUG. RETAIL
FOR 82-08 DUAL CABLE MODELS (EXCEPT 08 DRESSERS)
0630-0314 Classic, chrome
$145.95
0630-0488 Classic, black
155.95
0630-0315 Pro-Smooth, chrome
145.95
0630-0489 Pro-Smooth, black
155.95
0630-0317 Tribal Lance, chrome
185.95
0630-0491 Tribal Lance, black
195.95
TRANSMISSION
& DRIVELINE
0630-0494
PART #
DESCRIPTION
FOR 82-08 DUAL CABLE MODELS
(EXCEPT 08 DRESSERS) (CONT)
0630-0318 Premium, chrome
0630-0490 Premium, black
0630-0492 Valor, chrome
0630-0493 Valor, black
0630-0494 Medieval, chrome
0630-0495 Medieval, black
SUG. RETAIL
$150.95
160.95
150.95
160.95
185.95
195.95
GASKETS
& SEALS
0630-0495
0630-0009
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
BILLET GRIPS
CHROME
BILLET GRIPS
•Grips feature rubber
inserts that match
Thunder Heart footpegs and
brake/shifter pegs
•Fit 82-09 dual throttle assemblies
(except 08-09 FLHT/FLHR/
FLTR/FLHX)
SUG.
PART #
DESCRIPTION
RETAIL
DS-243779 Billet grips (pr.) $73.95
•Feature a coarse knurl for
excellent grip
•Install directly on any 73-09 Harley-Davidson that uses stock
push/pull cables (excluding models with air-assisted forks)
•CNC-machined from billet aluminum and chrome plated
•Easy to install in approximately 30 minutes with
common tools
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0630-0451
For 73-09 models (except 08-09
Dressers and those with
$138.95
air-assisted forks)
MAGNUM 865
CRUISER GRIPS
•Made from billet aluminum; feature soft,
vibration-resistant rubber coating for
added comfort
•140mm L
PART #
DESCRIPTION
SUG. RETAIL
0630-0009
For 1” bars
$68.95
68.95
0630-0010
For 7/8” bars
TANKS &
OIL FILTERS
MODEL 842 TRADITIONAL
CRUISER GRIPS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
760
PRO GRIPS
FOR HARLEYS
PG862-1
•Pro Grip offers quality
grips in a variety
PG862SK-1
of styles
•PART #s PG862-1 and
PG862SK-1 are specially
formulated to absorb
vibration and provide
a larger grip surface
•PART #PG864-1 features
billet aluminum
PG864-1
construction with the
popular knurled finish
at an extraordinary value
•All grips are made in Italy,
sized to fit 1” handlebars
and sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
$14.95
PG862-1
Damping grips, 51/2”
PG862SK-1
Damping grips w/ skull end caps, 51/2”
15.95
PG864-1
Knurled aluminum grips, 43/4”
75.95
PG-842-1
•Made from Pro Grip high-tech,
vibration-absorbing materials that
reduce fatigue and enhance control
•128mm L
PART #
DESCRIPTION
SUG. RETAIL
PG-842-1
For 1” bars
$14.95
14.95
PG-842-78
For 7/8” bars
COMFORT GRIPS
•Chrome-plated with
raised rubber grips
for comfort
•Integrated OEM
throttle tubes
•Wrist cruise compatible
•For 1” x 51/8” and 11/8” x 51/8” handlebars
PART #
DESCRIPTION
0630-0367
Comfort grips
SUG. RETAIL
$96.95
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
0630-0531
0630-0530
0630-0535
SEATS &
SISSY BARS
0630-0532
EXHAUST
0630-0536
BILLET
SPIKE GRIPS
BIG BIKE FLAME GRIPS
•Feature an ergonomic AVON seamless rubber grip technology
•Available in chrome or black anodized
•Tribal grips feature an embossed tribal logo
PART #
DESCRIPTION
0630-0531
Custom, chrome
0630-0532
Custom, black anodized
0630-0535
Tribal, chrome
0630-0536
Tribal, black anodized
SUG. RETAIL
$69.95
69.95
69.95
69.95
•High-quality flame design and
big-bike styling
•Made from billet aluminum and
AVON seamless rubber
grip technology
SUG.
PART #
DESCRIPTION
RETAIL
0630-0530 For 82-09
models (except
08-09 Dressers) $35.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0630-0539
0630-0540
ELECTRICAL
GA-0094-001
LIGHTING
GA-0094-011
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BIG V CRUISER GRIPS
AIR CUSHIONED GRIPS
•Feature billet end caps and rings with ergonomic
AVON seamless rubber grip technology
•Available in a 3-Ring or Fly-by design
PART #
0630-0539
0630-0540
DESCRIPTION
3-Ring for 82-09 models (except 08-09 Dressers)
Fly-by for 08-09 Dressers
SUG. RETAIL
$59.95
59.95
•Traditional high-quality design and
big-bike styling are incorporated
into these top-quality grips
•Constructed of durable Kraton G material
GA-0094-012
•Feature inner and outer die-cast chrome
caps and a black textured surface
•Big V Cruiser grips fit 1” bars
PART #
DESCRIPTION
SUG. RETAIL
GA-0094-001
Smooth chrome end cap w/ throttle sleeve
$30.95
GA-0094-002
Chrome eagle end cap w/ throttle sleeve
30.95
GA-0094-011
Smooth chrome end cap (w/o throttle sleeve)
26.95
GA-0094-012
Chrome eagle design end cap
(w/o throttle sleeve)
26.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
DELUXE
ROAD GRIPS
COMFORT HARLEY-STYLE GRIPS
•Nitrile foam grips have special large black end caps
•Rounded ends match Harley styling
•Sold in pairs
PART #
DESCRIPTION
GR-17
For all 1” handlebars
SUG. RETAIL
$8.95
•Super-tough grips
made of black
neoprene foam
•Feature chrome end
caps and inside shoulders
•Measure 6” L
PART #
DESCRIPTION
GR-24
For 1” bars
GR-25
Repl. foam sleeves
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$25.95
11.95
COVERS,
SECURITY
& GENERAL
761
SECTION
12
WINDSHIELDS
0631-0010
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
HEAT DEMONS GRIP WARMERS
•Kits come complete with everything needed
for fast and easy installation – four-level
power controller with adjustable-intensity
LEDs, two heater inserts, hardware and
wire-threading tool
•Replace half of the OEM clutch or brake
perch (unless noted)
•Work with any grips
•Heating unit mounts inside the handlebar
•Maximum length for wires through the
bars is 55”
•Available with chrome or black finish
0631-0011
NOTE: Not to be used with aluminum handlebars.
PART #
DESCRIPTION
SUG. RETAIL
FOR 7/8” OR 1” BARS
0631-00121
Chrome; left- or right-side mount (except
electronic throttle)
$129.95
1
Black; left- or right-side mount (except
0631-0013
129.95
FOR 1” BARS
0631-0010
Chrome; left-side mount (except
129.95
0631-0011
Black; left-side mount (except
129.95
0631-0032
Chrome; left-side mount for electronic throttle
139.95
0631-0033
Black; left-side mount for electronic throttle
139.95
0631-0028
Chrome; right-side mount (except
139.95
0631-0029
Black; right-side mount (except
139.95
PART #
DESCRIPTION
FOR 11/4” BARS
0631-0026
Chrome; left-side mount (except
0631-0027
Black; left-side mount (except electronic
throttle)
0631-0034
Chrome; left-side mount for electric throttle
0631-0035
Black; left-side mount for electric throttle
0631-0030
Chrome; right-side mount (except
0631-0031
Black; right-side mount (except
1
SUG. RETAIL
$139.95
139.95
149.95
149.95
139.95
139.95
Stand-alone; does not replace any portion of the clutch perch.
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
HEATED GRIPS
HEATED GRIPS
•Three-position heat control
•Easy to adjust while riding
•Internal wiring from left to right hand
•Classic chrome and rubber grips
PART #
DESCRIPTION
0630-0425
For 82-09 models (except 08-09 Dressers and those
with air assisted forks)
•Heated grips with five switch positions:
High, high/medium, medium, low and off
•For 1” handlebars with 5” grip length
•Dimensions: 1” dia. x 5” L and 11/8” dia. x 5”
•Sold in pairs
PART #
DESCRIPTION
0630-0199
Heated grips
SUG. RETAIL
$149.90
HEATED GRIPS
•No more freezing fingers on chilly rides
•Switch to high for 30W of heat (15 per grip) – 2.5A total
•Switch to low for 15W (7.5 per grip) – 1.7A total
•Each kit contains two heated grips, 70” of lead wire, resistor,
three-position switch and instructions; epoxy required but not included
•Inside diameter of left grip is 1.0”; inside diameter of right grip is 1.135”;
overall length is 4.75”
•Grips fit most 82-09 H-D models (except 08-09 Dressers)
PART #
DESCRIPTION
SUG. RETAIL
HG475100
Black
$114.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
762
SUG. RETAIL
$92.95
THROTTLE BOSS
STILETTO™ END CAPS
•Replace the existing caps on
Küryakyn’s ISO™-Grips
•Screws supplied for use with or
without ISO™ Throttle Boss
•Sold in pairs
PART #
0634-0016
DESCRIPTION
Stiletto™ end caps for ISO™-Grips
SUG. RETAIL
$39.95
•Provide Küryakyn ISO™
grips with an aggressive
finished look
•Beautifully shaped and chromed
with weighted bullets that act as
bar-end weights to reduce handlebar vibration
•Works with ISO Throttle Bos
•Installs in minutes
PART #
DESCRIPTION
0634-0191
For ISO grips by Küryakyn
SUG. RETAIL
$44.95
SECTION
10-GAUGE
MAGNUM
GRIP END CAPS
12
WINDSHIELDS
LEATHER GRIP COVERS
shotgun-shell design
•Fit OEM grips (except 04-09 XL)
and measure 1.4” L
•Include special application adhesive
•Sold in pairs
PART #
DESCRIPTION
DS-243189
Magnum end caps
SUG. RETAIL
$45.95
•Attractive black suede leather grip
covers come complete with laces
•Fit 1” handlebar grips to make a
unique addition to Harley models
•Sold in pairs (grips not included)
PART #
DESCRIPTION
DS-243058
Black leather grip covers
TOURING
LUGGAGE
SUG. RETAIL
$12.95
SEATS &
SISSY BARS
EXHAUST
FRINGED LEATHER
GRIP COVERS
•Black leather grip covers with
12” L fringe for grips on 1” bars
•Choose for either rubber- or
foam-covered grips
•Sold in pairs; grips
not included
PART #
DESCRIPTION
DS-243060
Grip covers for rubber grips
DS-243061
Grip covers for foam grips
FUEL/AIR
SYSTEMS
GRIP END CAPS WITH 12” FRINGE
SUG. RETAIL
$17.95
17.95
•Unique chrome end caps with 12” L leather fringe
•Slips over OEM rubber grips
PART #
DESCRIPTION
DS-243064 For all 82-09 models except 08-09 Dressers, 04-09
XL models and those w/ air-assisted front forks
ENGINE
SUG. RETAIL
$58.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ISO™-THROTTLE BOSS
•Throttle Boss attaches to the end of
the ISO™-Grips
•Small adjustable paddle is positioned
under the palm of the hand
•Allows the rider to maintain a steady
throttle position with a relaxed grip
•Re-designed rubber pad permits use on both
grips so you can have a matched set
•Works with the Küryakyn ISO™-Grips only,
available separately
•Sold each or as a matched set
PART #
DESCRIPTION
0630-0060
ISO™-Throttle Boss (pr.)
ELECTRICAL
LIGHTING
DS-241194
0630-0060
SUG. RETAIL
$29.95
PART #
DS-241194
DESCRIPTION
ISO™-Throttle Boss (ea.)
SUG. RETAIL
$16.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
0632-0002
0632-0001
TANKS &
OIL FILTERS
DASHES
& GAUGES
THROTTLE ADJUSTER SCREW KIT
UNIVERSAL THROTTLE BOSS
•Throttle Boss attaches to the end of any throttle grip utilizing
a twist-grip throttle
•Small adjustable paddle is positioned under the palm of the hand
•Allows the rider to maintain a steady throttle position with a relaxed grip
•When not in use it is easily removed without tools
PART #
DESCRIPTION
DS-241195
Universal Throttle Boss
SUG. RETAIL
$10.95
•Kit includes a stamped steel thumb wheel,
tension spring and friction spring
•Works with most 74-09 OEM and aftermarket
throttle controls
•Replacement springs sold to dealers in 10-pack
SUG.
PART #
DESCRIPTION
RETAIL
0632-0002 Throttle adjuster screw kit
$14.95
0632-0001 Repl. friction spring; repl.
OEM #56396-74A (10-pk.)
.95 (ea.)
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
THROTTLE CONTROL ADJUSTING SCREW
•Adjusting screw with spring fits all throttle controls from 74-09 (except 08-09 Dressers)
PART #
DESCRIPTION
DS-243139
Throttle control adjuster screw w/ spring; repl. OEM #s 56394-74 (spring)
and 56397-74A (adjuster screw)
FRAMES,
SUSPENSION
& FENDERS
SUG. RETAIL
$2.95
COVERS,
SECURITY
& GENERAL
763
SECTION
12
DS-223213
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
DUAL-CABLE
THROTTLE
ASSEMBLY KITS
•Each kit includes a twocable throttle assembly with
matching grips, throttle sleeve,
OEM-style throttle and idle cables
and hardware
•Designed for early-style S&S Super E & G carbs or any other butterfly-type
carburetor with 81-95 OEM-style throttle linkage
•Measured from throttle grip to end of cable housing; barrel fittings are
soldered in place (not for CV carbs)
•90° elbows
PART #
DS-223210
DS-223242
DS-223243
DS-223211
DS-223214
DS-223215
DS-223212
DS-223218
DS-223219
DESCRIPTION
39” throttle assembly kit
Repl. throttle cable (90° ends)
Repl. idle cable (90° ends)
42” repl. throttle cable
42” repl. idle cable
48” repl. throttle cable
48” repl. idle cable
SUG. RETAIL
$93.95
25.95
25.95
95.95
25.95
25.95
93.95
23.95
26.95
DS-223220
S&S UNIVERSAL
THROTTLE ASSEMBLY KIT
•Includes a dual cable throttle assembly with cables,
matching grips and hardware
•Designed for use with S&S series B, D or two-throat carbs
as well as many universal fitments
•Cables measured from throttle grip to end of cable housing
NOTE: Not for Super E & G series or CV carbs.
PART #
DS-223213
DS-223220
DESCRIPTION
48” universal throttle assembly kit
Repl. throttle cable (used as both
throttle and idle cable)
SUG. RETAIL
$51.95
4.95
GASKETS
& SEALS
THROTTLE ASSEMBLIES
FOR SINGLE/DUAL CABLE
ELECTRICAL
•Complete single- and dual-cable
throttle assemblies
•Each includes matching left-hand grip
•Accepts thread-in cables
•Sold in pairs
PART #
DESCRIPTION
DS-243128
Throttle/grip assembly, dual cable for 82-95 FX, FL and XL models;
repl. OEM #s 56395-81 and 56220-81B (works on most dual-cable
throttle applications)
DS-243127
Throttle/grip assembly, single cable for 73-81 Harley models;
repl. OEM #56500-79
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
ROLLER BEARING
THROTTLE KIT
•Design allows the factory
throttle tube to ride on a roller
bearing instead of dragging on
the handlebar
•Helps eliminate throttle binding
for smoother operation
•Requires cutting .500” from the right side
of handlebar
PART #
DS-243136
DESCRIPTION
Roller bearing throttle kit
DS-243128
SUG. RETAIL
$19.95
19.95
DUAL THROTTLE SLEEVE
SUG.
RETAIL
$24.95
•1.4” o.d. sleeves are available in black
•Fit most grips using standard style cables
•Sold each
PART #
DESCRIPTION
DS-243110
Black dual throttle sleeve
SUG.
RETAIL
$4.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS SENSOR-TYPE THROTTLE TUBE
& LICENSE FOR RUBBER GRIPS
PLATE FRAMES •Fully CNC machined billet construction with
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
764
BILLET THROTTLE TUBE
precision diamond knurl pattern to ensure
no-slip grip performance
•Our special hard black anodized finish for exceptional
smooth action and improved durability over plastic units
•Works super smooth due to the precise bore finish – works especially
well with a light coating of lithium grease
•Allows installation of virtually any rubber-style hand grip in minutes
– simply remove the two screws from the OEM throttle housing, slide
the old grip tube off, then slide our tube onto the gear found on the
sensor unit
PART #
DESCRIPTION
SUG. RETAIL
0632-0335
For 08-09 FLHT, FLHR, FLHX and FLTR models
$49.95
•Fully CNC-machined from billet aluminum with
a precision diamond knurl pattern that ensures
no-slip grip performance
•Special hard black anodized finish for exceptionally
smooth action and durability over plastic units
•Works super smooth due to the precise bore finish; works especially well
with a light coating of lithium grease
•Works perfectly with Joker’s JX and Dual Cable style throttle housings
•Accepts all late-model dual Harley-Davidson throttle cables (accepts 1/4”
round or cylindrical cable lugs)
PART #
DESCRIPTION
SUG. RETAIL
0632-0203
Billet throttle tube
$49.95
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
INTERNAL THROTTLE WITH SLEEVE
SEATS &
SISSY BARS
•Precision machined with roller bearing action instead of bushing
•A must for a clean handlebar look
•Constructed of stainless steel with aviation bronze components
•For custom applications
•Welding required
INTERNAL THROTTLE WITH GRIPS
PART #
0632-0161
PART #
0632-0337
DESCRIPTION
Internal throttle w/ sleeve
•Custom throttle assembly
•Comes complete with set of chrome billet aluminum Twisted Death grips
SUG. RETAIL
$239.95
DESCRIPTION
Internal throttle w/ grips
SUG. RETAIL
$299.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
0630-0474
GASKETS
& SEALS
0630-0473
0630-0470
ELECTRICAL
LIGHTING
0632-0333
0630-0471
0630-0472
QUARTER-TURN THROTTLE SYSTEM
HANDLEBARS,
CONTROLS
& MIRRORS
•Reduces overall throttle rotation which allows rider to go from cruise to full-throttle without regripping from palm to fingers
•Throttle tube is machined from high-strength PVC
•Installs easily in minutes
•Not for use with OEM cruise control
•For competition use only
PART #
DESCRIPTION
FOR ALL 96-09 H-D MODELS WITH CABLE SYSTEMS
0630-0470
Rail grips w/ smooth end caps
0630-0471
Rail grips w/ Skully end caps
0630-0472
Rail grips w/ Eagle end caps
SUG. RETAIL
$89.95
89.95
89.95
PART #
DESCRIPTION
FOR ALL 96-09 H-D MODELS WITH CABLE SYSTEMS (CONT)
0630-0473
Neil’s Diamond grips
0630-0474
Rub Dog grips
0632-0333
Throttle tube only
SUG. RETAIL
CABLES
$89.95
89.95
24.95
BRAKES
TANKS &
OIL FILTERS
0632-0206
DASHES
& GAUGES
0632-0204
0632-0205
FRAMES,
SUSPENSION
& FENDERS
0632-0207
FOOTRESTS
& LICENSE
PLATE FRAMES
JX SERIES THROTTLE HOUSINGS
•Low-profile design CNC-machined from billet aluminum
•Use with most aftermarket hand controls or by itself (depending on desired application)
•Works with all OEM-compatible hand grips (including all Joker Machine grips)
•Stainless steel tension screw kit works with all three versions (sold separately)
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SINGLE-CABLE HOUSINGS (5/16”-18 THREAD-IN CABLE)
DUAL-CABLE HOUSINGS (PUSH-IN CABLES)
Chrome
0632-0205
Chrome
$79.95 0632-0209
Black
0632-0206
Black
79.95 0632-0210
THROTTLE TENSIONER KIT
DUAL-CABLE HOUSINGS (THREAD-IN CABLES)
Stainless steel
0632-0207
Chrome
79.95 0632-0204
0632-0208
Black
79.95
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$79.95
79.95
24.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
765
SECTION
12
WINDSHIELDS
TOURING
DS-243101
DS-243093
LUGGAGE
DS-243094
DS-243091
DS-243092
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
NESS-TECH® CHROME
BILLET THROTTLE HOUSINGS
•Works with many combinations of handlebar controls
•Choose from grooved or radius design
•Available with single- or dual-cable capabilities
•Matching left-hand “fake” housings available to balance the look of the handlebars
•Available with or without “petite” switch
•Accepts 82-95 thread-in cables
PART #
DESCRIPTION
SUG. RETAIL
GROOVED DESIGN
DS-243143
Single-throttle housing
$76.95
DS-243093
“Fake” left-hand throttle housing
55.95
DS-243092
“Fake” left-hand throttle housing w/ switch
96.95
PART #
RADIUS DESIGN
DS-243101
DS-243100
DS-243094
DS-243091
DESCRIPTION
SUG. RETAIL
Dual-throttle housing
Single-throttle housing
Single-throttle housing w/ switch
“Fake” left-hand throttle housing
$76.95
76.95
131.95
55.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0632-0371
ELECTRICAL
DUAL CABLE
THROTTLE
HOUSINGS
0632-0374
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
THROTTLE HOUSINGS
•Billet throttle housing for early model
threaded style cables available in chrome or
black anodized
•Designed to work with and compliment Hawg
Halters switch housings, see page 636
PART #
DUAL CABLE
0632-0371
0632-0372
SINGLE CABLE
0632-0373
0632-0374
DESCRIPTION
SUG. RETAIL
Chrome
Black anodized
$91.95
91.95
Chrome
Black anodized
91.95
91.95
DS-243649
•Split body is CNC-machined
from billet stock, polished
and then chrome-plated or
hard black anodized
•Accept 82-95 thread-in cables
•Comes with an 8-32 hole
for OEM throttle controladjusting screw (adjusting
screw sold separately)
PART #
DESCRIPTION
DS-243649 Chrome
0632-0211 Black anodized
DS-243139
0632-0211
SUG. RETAIL
$71.95
69.95
PART #
DS-243139
DESCRIPTION
Adjusting screw (ea.)
SUG. RETAIL
$2.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
766
0632-0246
THROTTLE
HOUSINGS
•Machined from solid
billet aluminum
•Available for dual- or single-threaded
cable setups or snap-in style cable setups
•Available in show-chrome or black anodized finish
PART #
0632-0243
0632-0241
0632-0244
0632-0242
0632-0246
0632-0245
2404-0107
0632-0245
DESCRIPTION
Dual-cable, threaded, chrome
Dual-cable, threaded, black
Single-cable, threaded, chrome
Single-cable, threaded, black
Dual-cable, snap-in, chrome
Dual-cable, snap-in, black
SUG. RETAIL
$99.95
99.95
99.95
99.95
99.95
99.95
0616-0035
JX DESIGN GRIP SPACERS
GRIP SPACERS
0616-0049
0616-0048
•Machined from solid billet aluminum
•Creates a new look for your master cylinder cover
•Available in show-chrome or black anodized finish
PART #
DESCRIPTION
SUG. RETAIL
0616-0049 For 1” handlebars, clutch-side,
$26.95
cable or hydraulic, chrome
0616-0048 For 1” handlebars, clutchside, cable or hydraulic, black
26.95
HANDLEBAR GRIP SPACER
•Allows a smooth transition from
grip to 1” bars
SUG.
PART #
DESCRIPTION
RETAIL
1806-2001 Handlebar
grip spacer
$29.95
•Left-side chrome or black anodized grip spacer,
machined from billet aluminum
•Designed to fit 1”-diameter handlebars
(11/4” o.d. x 7/8” W)
•Inspired by the elegant Art Deco and Slipstream
design period of the 1930s, but with a modern flair
and the very latest in technology
•Designed by Joker’s own R.P. Warren, and completely
manufactured in the United States at Joker’s
Montclair, Calif., facility
PART #
DESCRIPTION
SUG. RETAIL
2404-0107
Chrome
$19.95
0616-0035
Black anodized
19.95
SECTION
12
WINDSHIELDS
TOURING
STEALTH MIRRORS WITH
DUAL INTENSITY LEDS
•Four rows of dual-intensity LEDs
are built into the front of each of
these chrome clear-glass mirrors
•Low-intensity brightness can be
wired for supplementary running
lights, high-intensity brightness
for supplementary turn signals
•The wiring is hidden in the mirror
head and stem and leaves the
stem through a hollow bolt
•Measure 5” x 21/2” with a 6”
pivot stem
•Mirror head screws and pivot ball
are stainless steel
•Mount on 72-09 H-D clutch or brake lever housings and most custom applications
•Replacement stems available separately
•Not DOT approved
NOTE: To allow the LEDs to operate as supplementary turn signals on
any model that does not have an automatic signal/flasher canceller, use
flasher unit WP-275.
NOTE: May require a load equalizer PART #DS-272336/BLLE02 when used in
conjunction with custom lighting.
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
PART #
DS-302230
DS-302231
DESCRIPTION
Right mirror
Left mirror
SUG. RETAIL
$58.95
58.95
ENGINE
TRANSMISSION
& DRIVELINE
DS-302150
GASKETS
& SEALS
ELECTRICAL
0640-0285
LIGHTING
DS-302152
DS-302166
HANDLEBARS,
CONTROLS
& MIRRORS
DS-302167
CABLES
BRAKES
TANKS &
OIL FILTERS
STEALTH I AND II MIRRORS
•The original chrome Stealth mirrors are available in clear or “Blue Sapphire” tinted designs
•”Blue Sapphire” design looks great and helps reduce glare
•The original Stealth I mirror with a 43/4” stem; works great on most pullback and Ape Hanger bars
•The Stealth II – same great custom mirror head but has a 6” stem – fabulous for drag or
custom handlebars
•Replacement stems and reflectors are also available separately
•Stems fit all Stealth mirror heads plus most OEM and aftermarket OEM-style mirror heads that
thread at the mirror head
•All feature familiar stud-style mounting common to other mirrors, or we supply chrome socket
head Allen bolts for a new style of custom mounting
•Oval head measures 5” x 21/2”; right- or left-side installation
•Mount on 72-09 H-D clutch or brake lever housings and most custom mounting applications
•Mirror head screws and pivots are stainless steel
•Sold each
PART #
STANDARD
DS-302150
0640-0285
DS-302152
0640-0286
DESCRIPTION
Stealth I chrome
mirror (ea.)
Stealth I black
mirror (ea.)
Stealth II chrome
mirror (ea.)
Stealth II black
mirror (ea.)
SUG. RETAIL
$32.95
32.95
32.95
32.95
PART #
DESCRIPTION
“BLUE SAPPHIRE”
DS-302166
Stealth I chrome
mirror (ea.)
0640-0287
Stealth I black
mirror (ea.)
DS-302167
Stealth II chrome
mirror (ea.)
0640-0288
Stealth II black
mirror (ea.)
SUG. RETAIL
$32.95
32.95
32.95
DASHES
& GAUGES
DS-302153
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-302163
PART #
DESCRIPTION
DS-302163 Stealth I chrome
mirror stem only (ea.)
DS-302153 Stealth II chrome
mirror stem only (ea.)
DS-302168 Repl. “Blue Sapphire”
glass (ea.)
32.95
SUG. RETAIL
$10.95
10.95
3.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
767
SECTION
12
DS-302154
DS-302155
DS-302156
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
“ROUND SERIES” MIRRORS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
•”Round Series” mirrors are completely chrome-plated with stainless steel pivots and mirror head screws
•Feature a tapered design with triangular cutouts along with textured recessed areas that may be painted
to match the bike
•Head diameter is 31/2” for a good view and a clean look
•”Thin Stem” specifically designed to match the shape of the mirror head; superclean taper at the bottom and mounting hardware at
the mirror head
•”Round Series” mirror head also available with Stealth I or longer Stealth II mirror stems
•Mirrors fit 72-09 H-D clutch or brake lever housings, plus most
PART #
DESCRIPTION
custom applications
DS-302154
Round mirror w/ “Thin Stem” (ea.)
•Larger sized “Thin Stem” measures 4” high and 45/8” long to get the mirror up
DS-302155
Round mirror w/ Stealth I stem (ea.)
and out farther
DS-302156
Round mirror w/ Stealth II stem (ea.)
•Chrome mounting hardware and instructions included
SUG. RETAIL
$32.95
32.95
32.95
0640-0415
GASKETS
& SEALS
0640-0416
ELECTRICAL
MICRO-MIRRORS
•Small and stylish black powder-coated die-cast mirrors
•Measure 41/2” W x 11/2” H
•Direct replacement on 06-09 FLHX and also easily custom-fit on other Bagger
models with fairings
•Sold in pairs
LIGHTING
PART #
FOR 06-09 FLHX
0640-0415
0640-0416
HANDLEBARS,
CONTROLS
& MIRRORS
DESCRIPTION
SUG. RETAIL
Mini-oval
Rad II
$92.95
92.95
CABLES
BRAKES
0640-0322
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
0640-0324
RAD III
DIE-CAST
MIRRORS
0640-0323
•Larger version of Ness’s popular Rad II die-cast mirror
•Increased reflective mirror area provides excellent visibility
•Available in either chrome or black finish
•Glass dimensions measure 7” W x 3” H
•DOT approved
PART #
0640-0322
0640-0323
DESCRIPTION
Left mirror, chrome
Right mirror, chrome
SUG. RETAIL
$71.95
71.95
PART #
0640-0324
0640-0325
0640-0325
DESCRIPTION
Left mirror, black
Right mirror, black
SUG. RETAIL
$71.95
71.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
768
TRIBAL MIRROR
•Chrome-plated die-cast mirrors with a tribal design
•43/4” stem with 5” x 21/8” mirror head; glass dimensions measure
33/4” W x 11/8” H
•Fits left or right side
•Sold each
PART #
0640-0118
DESCRIPTION
Tribal mirror
SUG. RETAIL
$51.95
SECTION
12
WINDSHIELDS
0640-0042
TOURING
0640-0018
LUGGAGE
0640-0020
0640-0022
0640-0043
0640-0044
SEATS &
SISSY BARS
0640-0213
EXHAUST
0640-0207
FUEL/AIR
SYSTEMS
0640-0212
0640-0206
0640-0045
ENGINE
0640-0215
0640-0211
TRANSMISSION
& DRIVELINE
0640-0209
GASKETS
& SEALS
NESS MICRO
DIE-CAST MIRRORS
•Small stylish designs for
custom applications
•Die-cast construction
•Feature convex glass
•Hardware included
•Sold each
PART #
DESCRIPTION
CHROME
0640-0018 Rad II teardrop, left
0640-0019 Rad II teardrop, right
0640-0020 Mini oval, left
0640-0021 Mini oval, right
0640-0022 Upswept, left
0640-0023 Upswept, right
0640-0042 Scoop, left
0640-0043 Scoop, right
0640-0044 Four Point, left
0640-0045 Four Point, right
0640-0214
0640-0210
ELECTRICAL
0640-0208
LIGHTING
GLASS DIMENSIONS
33/4”
33/4”
41/2”
41/2”
41/2”
41/2”
41/2”
41/2”
33/4”
33/4”
W
W
W
W
W
W
W
W
W
W
x
x
x
x
x
x
x
x
x
x
11/4”
11/4”
11/2”
11/2”
11/2”
11/2”
11/2”
11/2”
11/2”
11/2”
H
H
H
H
H
H
H
H
H
H
SUG. RETAIL
$47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
PART #
BLACK
0640-0206
0640-0207
0640-0212
0640-0213
0640-0210
0640-0211
0640-0208
0640-0209
0640-0214
0640-0215
DESCRIPTION
GLASS DIMENSIONS
Rad II teardrop, left
Rad II teardrop, right
Mini oval, left
Mini oval, right
Upswept, left
Upswept, right
Scoop, left
Scoop, right
Four Point, left
Four Point, right
41/2”
41/2”
41/2”
41/2”
41/2”
41/2”
33/4”
33/4”
33/4”
33/4”
W
W
W
W
W
W
W
W
W
W
x
x
x
x
x
x
x
x
x
x
11/2”
11/2”
11/2”
11/2”
11/2”
11/2”
11/4”
11/4”
11/2”
11/2”
SUG. RETAIL
H
H
H
H
H
H
H
H
H
H
$47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
47.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DS-302033
DS-302036
DS-302034
DASHES
& GAUGES
0640-0028
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-302038
•Available in all the hot styles: Slingshot, Pocket Turbo, Vision and Oval stepped
•All styles feature convex glass
•Can be used on right or left side
•Sold each
SUG.
PART #
DESCRIPTION
GLASS DIMENSIONS
RETAIL PART #
$47.95 DS-302036
0640-0028
Oval stepped
5” W x 21/2” H
DS-302033
Slingshot grooved
43/4” W x 2” H
47.95 DS-302037
DS-302034
Slingshot smooth
43/4” W x 2” H
47.95 DS-302038
DS-302035
Left Pocket Turbo grooved
41/2” W x 2” H
47.95 DS-302039
TIRES,
TUBES &
WHEELS
DS-302039
CHROME DIE-CAST ALTERNATIVE MIRRORS
DESCRIPTION
Right Pocket Turbo grooved
Left Pocket Turbo smooth
Right Pocket Turbo smooth
Vision grooved
GLASS DIMENSIONS
41/2” W x 2” H
41/2” W x 2” H
41/2” W x 2” H
41/4” W x 21/8” H
SUG.
RETAIL
$47.95
47.95
47.95
47.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
769
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
LARGE CHROME
ALTERNATIVE
DIE-CAST MIRRORS
•Offers great visibility and style
•Billet look with die-cast price
•Fits left or right side
•Glass dimensions measure 63/8” W
x 35/8” H
•Includes hardware and adapters
•Sold each
PART #
DESCRIPTION
BIG-EYE STYLE
DS-302044
Stepped
DS-302045
DS-302044
SUG. RETAIL
$47.95
PART #
DESCRIPTION
BIG-EYE STYLE (CONT)
DS-302045
Plain
SUG. RETAIL
$47.95
DS-302046
PART #
DESCRIPTION
BIG-EYE STYLE (CONT)
DS-302046
Grooved
SUG. RETAIL
$47.95
1901-2241
EXHAUST
FUEL/AIR
SYSTEMS
DS-302090
ENGINE
TEARDROP
MIRRORS
WITH
STEEL STEMS
DS-302060
TRANSMISSION
& DRIVELINE
•Chrome die-cast head with convex glass
•Chrome 5” steel stem positions mirror head for
greater visibility
•Mirror head measures 63/8” x 3”; glass dimensions
measure 53/4” W x 11/2” H
•Sold each
CAT EYE SOFTBEND MIRRORS
GASKETS
& SEALS
ELECTRICAL
•Chrome die-cast construction
•Compact design for right or left side use
•Include an adapter for multiple applications
•Sold each
PART #
DS-302060
DS-302090
DESCRIPTION
Grooved
Smooth
GLASS DIMENSIONS
41/4” W x 21/4” H
41/4” W x 21/4” H
SUG. RETAIL
$47.95
47.95
PART #
1901-2241
1901-2242
DESCRIPTION
Left mirror
Right mirror
SUG. RETAIL
$29.95
29.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
0640-0026
CABLES
BRAKES
NESS 3-D CAT EYE MIRRORS
TANKS &
OIL FILTERS
•Quality die-cast construction
•Beautifully chrome plated
•57/8” stem, 6” x 17/8” mirror head; glass
dimensions measure 31/2” W x 15/8” H
•Sold each
DASHES
& GAUGES
PART #
0640-0026
0640-0027
DESCRIPTION
Left mirror
Right mirror
OVAL MIRROR
SUG. RETAIL
$47.95
47.95
•Designed by master bike builder Don Hotop
•Fits most handlebars and looks great
•Machined from billet aluminum, then chrome plated
•Mirror head measures 5” x 2” with a 51/4” stem
•Fits right or left side
•Sold each
PART #
1901-0026
DESCRIPTION
Oval mirror
SUG. RETAIL
$74.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
770
0640-0387
TEAR-DROP MIRRORS
•Exceptional design by Tank Tuff Cycles
only available from Drag Specialties
•Mirror head measures 3” x 5” with plain glass
•Two stem lengths: short 31/2” and long 51/2”
•Available in chrome or black finish
•Mounts on left or right side and includes mounting hardware
•Sold each
PART #
0640-0387
0640-0388
DESCRIPTION
Chrome, long-stem
Chrome, short-stem
0640-0390
SUG. RETAIL
$44.95
44.95
PART #
0640-0389
0640-0390
DESCRIPTION
Black, long-stem
Black, short-stem
SUG. RETAIL
$44.95
44.95
SECTION
12
WINDSHIELDS
TOURING
PORK CHOP FAIRING MIRRORS
LUGGAGE
•Chrome die-cast mirrors bolt to the inner fairing
•Contour complements the fairing style
•Includes all necessary mounting hardware
•Requires four 3/16” mounting holes be drilled into the fairing
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0640-0191
For 96-09 FLHT models
$89.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
0640-0296
0640-0036
ENGINE
0640-0297
TRANSMISSION
& DRIVELINE
0640-0034
GOTHIC MIRROR WITH SCULPTURED STEM
•Mirror heads measure 51/2” x 2” with a 6” stem
•Sold each
PART #
DESCRIPTION
RIGHT SIDE
0640-0034
Maltese Cross chrome stem
0640-0036
Flame chrome stem
0640-0297
Flame black stem
SUG. RETAIL
$41.95
41.95
41.95
PART #
LEFT SIDE
0640-0033
0640-0035
0640-0296
DESCRIPTION
SUG. RETAIL
Maltese Cross chrome stem
Flame chrome stem
Flame black stem
$41.95
41.95
41.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
0640-0115
BRAKES
0640-0289
0640-0116
0640-0117
FLAME TEARDROP MIRRORS
WITH SCULPTURED STEM
TANKS &
OIL FILTERS
•Cool teardrop head with 3-D graphics
•Die-cast aluminum construction with chrome or black powder coat finish
•Mirror head measures 51/4” x 21/2”
•Sold in pairs; includes chrome mounting hardware
DASHES
& GAUGES
PART #
0640-0115
0640-0116
DESCRIPTION
SUG. RETAIL
Radius stem, chrome, (includes 31/2” and 41/2” stems)
$83.95
Flame stem, chrome, 6” stem length
83.95
PART #
0640-0289
0640-0117
DESCRIPTION
Flame stem, black, 6” stem length
Slayer stem, chrome, 6” stem length
SUG. RETAIL
$83.95
83.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
DIE-CAST MIRRORS
•Polished and chrome-plated
die-cast construction
•PART #0640-0217 mirror area
measures 37/8” L x 15/8” W
•PART #0640-0218 mirror area measures 51/8” L x 17/8” W
•PART #0640-0219 mirror area measures 31/2” L x 13/4” W
•All mirrors have 6” L stems
•Mounting hardware included
PART #
DESCRIPTION
0640-0217
Hatchet w/ Flame stem
0640-0218
Lance
0640-0218
0640-0217
0640-0219
SUG. RETAIL
$83.95 (pr.)
45.95 (ea.)
PART #
0640-0219
DESCRIPTION
3-D Flame w/ Flame stem
SUG. RETAIL
$83.95 (pr.)
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
771
SECTION
12
WINDSHIELDS
TOURING
0640-0032
0640-0031
0640-0112
LUGGAGE
0640-0111
0640-0114
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
MIRRORS WITH
SCULPTURED STEM
0640-0113
•Chrome-plated aluminum construction
•Oval mirror heads measure 35/8” x 17/8” with a 6” stem
•Diamond mirror heads measure 5” x 27/8” with a 61/2” stem
•Smooth mirror heads measure 45/8” x 15/8” with a 71/2” stem
•Fits both right and left sides
•Includes mounting hardware
•Sold each
PART #
OVAL MIRRORS
0640-0031
0640-0032
DESCRIPTION
SUG. RETAIL
Maltese Cross
Flame
$41.95
41.95
PART #
DESCRIPTION
DIAMOND MIRRORS
0640-0111
Twisted
0640-0112
Flame
SUG. RETAIL
$45.95
45.95
PART #
DESCRIPTION
SMOOTH MIRRORS
0640-0113
Flame
0640-0114
Slayer
SUG. RETAIL
$45.95
45.95
0640-0083
TRANSMISSION
& DRIVELINE
0640-0398
GASKETS
& SEALS
ELECTRICAL
0640-0082
GOTHIC AND AXE MIRRORS
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
0640-0085
TEARDROP MIRRORS
•Custom-mirror design at a great price
•Aluminum die-cast construction,
polished and chrome plated
•Mirror head measures 51/2” x 2”, stem length 6”
•Stem styles available: Radius, Twisted, and Flame
•Include mounting hardware, sold in pairs
PART #
0640-0082
0640-0083
0640-0085
DESCRIPTION
W/ short (31/2”) and long (41/2”) Radius stems
W/ Twisted stem
W/ Flame stem
SUG. RETAIL
$79.95
79.95
79.95
•Billet aluminum head with black
powder-coat finish that is profilemachined to bare aluminum for
a truly unique look
•6” die-cast, sculptured flame
stem with black
powder-coat finish
•Gothic Head measures 21/8” x
51/4”; Axe head
measures 21/4” x 5”
•Includes mounting hardware;
sold in pairs
PART #
0640-0398
0640-0397
0640-0397
DESCRIPTION
Gothic mirrors
Axe mirrors
SUG. RETAIL
$139.95
139.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
0640-0226
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
772
0640-0400
0640-0399
0640-0225
MONTANA MIRRORS
•Montana mirrors give a big-sky view
•Die-cast, polished and
chrome-plated construction
•Oval mirror head measures 21/2” x 41/4”
•Three stem styles to choose
from: Stealth (5”), Flame (6”)
and Radius (both 31/2” and
PART #
41/2” included)
0640-0225
•Includes chrome-plated
0640-0226
mounting hardware
0640-0234
•Sold in pairs
MIRRORS WITH
5-HOLE STEM
0640-0234
DESCRIPTION
Radius
Flame
Stealth
SUG. RETAIL
$83.95
83.95
83.95
•Die cast construction
•Chrome-plated finish
•Sold in pairs
PART #
0640-0399
0640-0400
0640-0401
0640-0401
SUG.
DESCRIPTION
RETAIL
Small rectangular mirrors (37/8” x 21/2”), stem length 43/4” $69.95
Large mirrors (43/4” x 27/8”), stem length 53/4”
69.95
3” round mirrors, stem length 53/4”
69.95
SECTION
12
WINDSHIELDS
TOURING
OVAL MIRROR
1901-6232
1901-6233
OVAL MIRRORS
•Chrome die-cast housing
•Head measures 53/8” x 31/4”
•Slotted stem design in
left and right applications
•Sold each
PART #
1901-6232
1901-6233
DESCRIPTION
Oval left
Oval right
SUG. RETAIL
$37.95
37.95
LUGGAGE
•Chrome-plated die-cast
aluminum construction
•Two stems included; 31/2”
and 41/2” L
•Oval mirror head measures
31/2” x 2”
•Chrome hardware included
PART #
0640-0094
SEATS &
SISSY BARS
DESCRIPTION
Oval mirror
SUG. RETAIL
$45.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
DS-300017
1901-1901
TEARDROP
MIRRORS
BILLET MIRRORS
•Die-cast chrome
aluminum mirrors
in a sleek teardrop design
•Available with left or
right hand stem
•Approximately 6” x 3”
•Sold each
•Chrome machined aluminum
•Unique design; sculptured stem
•Teardrop mirror heads measure 55/8” x 31/2”
with 51/2” stems
•Mounting hardware supplied
•Sold each
PART #
1901-1900
1901-1901
DESCRIPTION
Right-hand teardrop
Left-hand teardrop
SUG. RETAIL
$34.95
34.95
PART #
DS-300016
DS-300017
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
DS-300016
ELECTRICAL
DESCRIPTION
Right Teardrop
Left Teardrop
SUG. RETAIL
$33.95
33.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
SPIKE MIRRORS
0640-0089
•One-of-a kind style and value
•Chrome-plated finish over
polished die-cast aluminum
•Mirror head measures
51/2” x 3”, mirror area 2” x 3”
•Stem length 6”, available
in three styles
•Includes mounting hardware;
sold each (can be mounted
on left or right)
PART #
0640-0086
BRAKES
0640-0088
0640-0086
DESCRIPTION
W/ short (31/2”) and long (41/2”)
Radius stems
SUG. RETAIL
$45.95
PART #
0640-0088
0640-0089
TANKS &
OIL FILTERS
DESCRIPTION
W/ Maltese Cross stem
W/ Flame stem
SUG. RETAIL
$45.95
45.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
RECTANGULAR MIRROR
WITH AIR STEM
FIREMAN
TRIBUTE MIRROR
TIRES,
TUBES &
WHEELS
•Die-cast construction with
a chrome finish
•Head measures 41/8” x 27/8”
with a 6” stem
•Universal 5/16” mounting hole
and hardware
•Can be used in right
or left applications
•Sold each
•Chrome die-cast
construction
•Mirror head measures 3” x 3”
•One 3” and one
4” stem included
•Sold each
PART #
0640-0016
FOOTRESTS
& LICENSE
PLATE FRAMES
DESCRIPTION
Fireman tribute mirror
SUG. RETAIL
$41.95
PART #
0640-0006
DESCRIPTION
Rectangular mirror
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$24.95
COVERS,
SECURITY
& GENERAL
773
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
Standard
•Replacement mirror for Harley models
•Fits stock H-D clutch or brake levers
•Mirror head measures 51/4” x 33/4” with a 53/4” stem
DESCRIPTION
Standard replacement mirror
DIE-CAST
REPLACEMENT MIRRORS
SUG. RETAIL
$15.95
EXHAUST
FUEL/AIR
SYSTEMS
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
Long stem
STANDARD
REPLACEMENT MIRROR
PART #
DS-302072
ENGINE
Low rider
RECTANGULAR
MIRROR
•Custom die-cast mirror;
includes standard stem
to fit stock clutch or
brake housings
PART #
DESCRIPTION
DS-302083
Measures 2” x 41/4”
SUG. RETAIL
$15.95
•Standard, Low Rider or long stem
die-cast chromed mirrors
•Fits into stock clutch or brake
housing for direct replacement
•Fully adjustable with lightly tinted, 31/2” x 5” glass lenses
PART #
DESCRIPTION
REPLACEMENT MIRRORS
DS-302108
W/ standard stem
DS-302109
W/ Low Rider stem
DS-302110
W/ long stem
REPLACEMENT MIRROR STEMS
DS-302104
Standard-length stem (ea.)
DS-302105
Low Rider stem (ea.)
DS-302106
Long stem (ea.)
SUG. RETAIL
$23.95
23.95
23.95
6.95
6.95
6.95
DS-302116
ELECTRICAL
LIGHTING
LIVE TO RIDE
CUSTOM MIRRORS
DS-302050
DS-302051
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-302053
DS-302054
DS-302055
•High-quality die-cast
mirrors feature the
“Live to Ride...Eagle Spirit” script
•Chrome or gold eagle embossed
on the back of the mirror
•Standard right- or left-hand version
DS-302118
(for correct facing of embossed eagle)
•Mirror face measures approximately 5” x 43/4”
SUG.
SUG.
PART #
DESCRIPTION
RETAIL PART #
DESCRIPTION
RETAIL
CHROME
GOLD
DS-302116 Right-hand
$35.95 DS-302118 Right-hand
$51.95
DS-302117 Left-hand
35.95 DS-302119 Left-hand
51.95
CUSTOM MIRRORS
•Feature chrome housings with 5” stems
•Universal round and oval styles come in various sizes and work in both
left and right applications
PART #
DESCRIPTION
SUG. RETAIL
DS-302050
Smooth back 4” round
$14.95
DS-302051
Smooth back 3” round
14.95
DS-302053
Ball mill back 2.75” round
18.95
DS-302054
Live to Ride 6” x 3” oval
32.95
DS-302055
Smooth back 4.75” x 2.5” oval
15.95
FLAMED MIRROR
•Chrome die-cast housing
•4” round design with
universal right/left stem
•Sold each
PART #
DESCRIPTION
1901-6231
Flamed mirror
SUG. RETAIL
$19.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
774
IRON CROSS MIRROR
•Straight cut-out style stem
•Mirror head measures 41/8” x 31/4” with a 6” stem
•Fits left- or right-side applications
•Sold each
PART #
DESCRIPTION
0640-0041
Iron Cross mirror
SUG. RETAIL
$41.95
SECTION
12
WINDSHIELDS
TOURING
0640-0090
MALTESE CROSS MIRRORS
MALTESE CROSS
MIRROR WITH
LED STEM LIGHT
0640-0091
•Mirror head measures approximately 31/2” x 31/2”
•Stem length 6”, two styles available
•Includes mounting hardware, sold each (universal left or right mount)
PART #
DESCRIPTION
SUG. RETAIL
0640-0090
Twisted stem
$65.95
0640-0091
Flame stem
65.95
LUGGAGE
•Chrome die-cast
housing; measures
4” x 4”
•Features amber
single-function LEDs
•Universal mount
(right or left)
•Mounting
hardware included
•Sold each
SEATS &
SISSY BARS
EXHAUST
NOTE: Load equalizer
is required for
lights to function as
supplemental signals.
PART #
0640-0007
DESCRIPTION
Maltese Cross mirror
w/ LED stem light
SUG.
RETAIL
$42.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
MINI MALTESE
CROSS MIRROR
•Chrome die-cast
housing with a head size
of 21/2” x 21/2”
•Comes with two stems
(5” and 33/4”) and 5/16”
mounting hardware
•Universal mount for rightor left-side applications
•Sold each
PART #
DESCRIPTION
0640-0011
Mini Maltese Cross mirror
1901-6009
MALTESE MIRROR
GASKETS
& SEALS
•Chrome die-cast head
measures 4” x 4”
•Available in an Air-Glide
or round-stem style
•Universal mount
(right or left)
•Sold each
SUG. RETAIL
$33.95
PART #
1901-6009
1901-6060
DESCRIPTION
Air-Glide stem
SUG.
RETAIL
$21.95
PART #
1901-6060
DESCRIPTION
Round stem
SUG.
RETAIL
$19.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DS-302032
CUSTOM MIRRORS
AND CLAMP
ELECTRICAL
DS-302074
CABLES
•All-metal, fully adjustable,
chromed mirrors with glass face
•Round or rectangular style
•Include 7/8” and 1” handlebar clamps
•Universal clamp, which adjusts to 3/4”, 7/8” or 1” handlebars,
also available separately
•Sold each
PART #
DESCRIPTION
DS-302032
2” x 41/4” rectangular mirror, 8” stem
DS-302074
37/8” round mirror, 4” stem
DS-302087
2” x 41/4” rectangular mirror, 4” stem
DS-302031
Universal mirror clamp
DS-302087
BRAKES
SUG. RETAIL
$15.95
15.95
15.95
5.95
TANKS &
OIL FILTERS
DS-302031
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
103100
103160
TIRES,
TUBES &
WHEELS
103110
HARDWARE,
CHEMICALS
& TOOLS
PRO-MINI CHROME MIRRORS
•Chrome-finish mirrors for any custom or stock Harley application
•Smooth (41/2” x 11/2”) and Diamond (5” x 4”)
mirrors feature both long (5” L x 4” H) and
short (33/4” L x 3” H) stems; sold each
PART #
DESCRIPTION
•Contour-style is 9” L x 31/2” H; Teardrop-style
103100
Contour (pr.)
is 7” L x 4” H; both are sold in pairs
103160
Teardrop (pr.)
•All mirrors include mounting hardware
103140
SUG. RETAIL
$113.95
98.95
PART #
103110
103140
DESCRIPTION
Smooth (ea.)
Diamond (ea.)
SUG. RETAIL
$51.95
51.95
COVERS,
SECURITY
& GENERAL
775
SECTION
12
WINDSHIELDS
TOURING
1901-0021
1901-0009
1901-0001
1901-0011
LUGGAGE
1901-0006
SEATS &
SISSY BARS
1901-0015
EXHAUST
1901-0005
0640-0258
FUEL/AIR
SYSTEMS
0640-0250
ENGINE
0640-0236
TRANSMISSION
& DRIVELINE
0640-0261
0640-0251
GASKETS
& SEALS
ELECTRICAL
0640-0255
0640-0260
0640-0247
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
776
BILLET ALUMINUM MIRRORS WITH CLEAR GLASS
0640-0245
•Unique stainless steel pivot rides in a special nylon bushing; mirror head will
never lose adjustment or rust at the pivot
•Unsightly adjustment screws on the back of the mirror head are eliminated
•Can be installed on all H-D clutch or brake housings from 72-08; all necessary hardware included
CHROME
PART #
DESCRIPTION
OVAL 5” X 21/2”
1901-0000
Weekend Warrior ball-milled, left
1901-0001
Weekend Warrior ball-milled, right
1901-0008
Weekend Warrior cutout, left
1901-0009
Weekend Warrior cutout, right
1901-0010
Pro Street smooth, left
1901-0011
Pro Street smooth, right
1901-0020
Pro Street ball-milled, left
1901-0021
Pro Street ball-milled, right
1901-0006
Pro Street ball-milled cutout, left
1901-0007
Pro Street ball-milled cutout, right
BLACK
PART #
OVAL 5” X 21/2”
0640-0235
DESCRIPTION
SUG. RETAIL
$121.95
121.95
121.95
121.95
121.95
121.95
121.95
121.95
121.95
121.95
SUG. RETAIL
Smooth head w/ Weekend
Warrior ball-milled stem, left
0640-0236
Warrior ball-milled stem, right
0640-0261
Warrior cutout stem, left
0640-0262
Warrior cutout stem, right
RECTANGULAR 4” X 2”
0640-0249
0640-0250
0640-0251
Warrior cutout stem, left
0640-0252
Warrior cutout stem, right
$121.95
121.95
121.95
121.95
121.95
121.95
121.95
PART #
DESCRIPTION
RECTANGULAR 4” X 2”
1901-0004
Weekend Warrior
1901-0005
Weekend Warrior
1901-0014
Weekend Warrior
1901-0015
Weekend Warrior
LARGE FLAME 7” X 23/4”
0640-0257
Left
0640-0258
Right
PART #
ROUND 3” DIA.
0640-0247
SUG. RETAIL
ball-milled, left
ball-milled, right
cutout, left
cutout, right
DESCRIPTION
0640-0248
0640-0255
Smooth head w/ teardrop
ball-milled stem, left
0640-0256
Smooth head w/ teardrop
ball-milled stem, right
0640-0259
Warrior cut-out stem, left
0640-0260
Warrior cut-out stem, right
LARGE FLAME 7” X 23/4”
0640-0245
Left
0640-0246
Right
121.95
$121.95
121.95
121.95
121.95
149.95
149.95
SUG. RETAIL
$121.95
121.95
121.95
121.95
121.95
121.95
149.95
149.95
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
BLIND SPOT MIRRORS WITH INNER FAIRING MOUNTS
BLIND SPOT TURN SIGNAL MIRRORS
•Mirrors feature amber LEDs in the outer edge of the mirror that function
as auxiliary turn signals
•Mirror heads and mounts are chromed
•Install using existing holes on inner fairing in FLHX models, require
drilling for installation on FLHT models
•LEDs plug into stock wiring harness
•Mirrors are a direct replacement on 06-09 FLHX; can be installed on any
96-09 FLHT, FLHTC or FLHTCU
•Include template and all necessary installation hardware
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0640-0351
Blind Spot mirrors w/ fairing mounts
$199.95
•Mirrors have LED amber turn signals directed to the side to get the
attention of drivers in your blind spot
•Beveled glass and sculpted mirror head move in a ball-and-socket
mechanism for easy adjustment
•Includes mounting hardware for a variety of H-D applications
•Not recommended for use with Buckhorn handlebars
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0640-0349
Blind spot mirrors
$189.95
TRANSMISSION
& DRIVELINE
•Custom mirrors that look great
coming or going
•Amber LEDs can be used as
running lights or auxiliary
turn signals
•Available with flat or reduced
image convex glass
•Mirror stems measure
DS-302061
approximately 7” with 51/4” x
3
2 /4” mirror heads
•Include load equalizer and hardware for various applications
•Sold in pairs
SUG. RETAIL
$189.95
189.95
SKULL MIRRORS
•Chrome mirror head measures 3” x 4”
•Stem is smoothly arched and positions
mirror center approximately 43/8”
above and 51/2” outboard of the
mounting point
•Mirror adjustment mechanism is a
swivel ball between two opposing pins
•Pins are threaded to allow quick,
easy tension adjustment
•Hardware for a variety of H-D
mounting applications included
•Sold in pairs
PART #
DESCRIPTION
0640-0216
Skull mirror
GASKETS
& SEALS
MALTESE CROSS MIRRORS
NOTE: Not DOT approved and not recommended for Buckhorn bars.
DESCRIPTION
Flat glass mirrors
Convex glass mirrors
FUEL/AIR
SYSTEMS
ENGINE
TURN SIGNAL MIRRORS
PART #
DS-302061
DS-302062
EXHAUST
•Mirrors for the chopper lifestyle
•Flat glass lens surrounded by a heavy, protruding bezel that is accented
by a knurled edge for the complete outlaw look
•Mirror head measures 31/4” diameter with a 51/2” stem
•Scalloped mirror arms are capped with a stiletto end cap
•Bezel is easily removed to adjust the mirror
tension mechanism if required
•Includes mounting hardware to fit a variety of H-D applications (not
recommended for Buckhorn handlebars)
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0640-0119
Maltese Cross mirrors
$99.95
ELLIPSE™ MIRRORS
DS-302063
DS-303450
NOTE: Not recommended for
Buckhorn bars.
PART #
DS-302063
DS-302064
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
•Custom mirrors that look
great coming or going
•Available with flat- or
reduced-image convex glass
•Mirror heads measure 51/4” x
23/4” with a 7” stem
•Include hardware for
various applications
•Sold in pairs
SUG. RETAIL
$139.95
ELECTRICAL
BRAKES
TANKS &
OIL FILTERS
DESCRIPTION
Flat glass
Convex glass
SUG. RETAIL
$99.95
99.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
MAGNUM MIRRORS
•Super-tough, high-quality chrome mirrors
•Large mirrors have same square-inch as stock;
DS-303452
small mirrors are 20% smaller
•Small Magnum mirrors have 51/2” stems with 5” x 23/4” mirror heads
•Large Magnum mirrors have 51/2” stems with 55/8” x 31/4” mirror heads
•Small Magnum Plus mirrors have 7” stems with 5” x 23/4’ mirror heads
•Large Magnum Plus mirrors have
7” stems with 55/8” x
31/4” mirror heads
SUG.
•Replace any stock
PART #
DESCRIPTION
RETAIL
Harley mirror
DS-303452 Small Magnum (pr.)
$89.95
•Magnum mirrors are
DS-303453 Large Magnum (pr.)
89.95
sold as pairs; Magnum
DS-303450 Small Magnum Plus (ea.)
49.95
Plus mirrors are
DS-303451 Large Magnum Plus (ea.)
49.95
sold each
TIRES,
TUBES &
WHEELS
MIRROR LIGHTS
•Dresses up the flat black mirrors and adds auxiliary turn signals
•Chrome cover with amber LEDs installs easily and uses plug-in
connections to add extra visibility
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
0641-0044
For 06-08 FLHX, 96-08 FLHT, FLHTC,
FLHTCU w/ H-D mirror PART #91945-98B
$129.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
777
SECTION
12
WINDSHIELDS
TOURING
LUGGAGE
0640-0005
SEATS &
SISSY BARS
0640-0194
EXHAUST
FUEL/AIR
SYSTEMS
0640-0196
ENGINE
0640-0110
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0640-0193
Standard stem
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DIGITAL MIRRORS WITH GAUGES
•Chrome billet housings with a choice of standard or twisted 1/2” stainless steel stem
•Available in three styles: Slimline Oval, Saber and Eliminator Oval
•Available in two versions: X model (speedo, tripmeter, tach and indicator lights) and XD model
(speedo, tripmeter, tach, indicator lights and directional signals on mirror backs)
•Readouts are divided between left- and right-side mirrors, highly visible, even in bright sunlight
•X Model mirrors add high-beam indicator, neutral indicator, turn indicator and low oil and low volt indicator
•XD Model mirrors add directional indicators on the back side of mirror
•Work with OEM or aftermarket speed sensors and single-fire or dual-fire ignitions
•Sold in pairs
Twisted stem
NOTE: May require the use of a load equalizer if used in conjunction with low-wattage custom lights.
CABLES
BRAKES
PART #
X MODELS
0640-0004
0640-0005
0640-0038
0640-0040
0640-0196
DESCRIPTION
SUG. RETAIL
Slimline, standard stem (3” x 5” )
Slimline, twisted stem (3” x 5” )
Eliminator, standard stem (2” x 3”)
Saber, standard stem
Saber, twisted stem
$769.95
769.95
769.95
769.95
769.95
TANKS &
OIL FILTERS
PART #
XD MODELS
0640-0193
0640-0192
0640-0194
0640-0195
0640-0109
0640-0110
DESCRIPTION
SUG. RETAIL
Slimline, standard stem (3” x 5” ) w/ directionals
Slimline, twisted stem w/ directionals (3” x 5” )
Eliminator, standard stem
w/ directionals (2” x 3”)
Eliminator, twisted stem
w/ directionals (2” x 3”)
Saber, standard stem w/ directionals
Saber, twisted stem w/ directionals
$799.95
799.95
799.95
799.95
799.95
799.95
DASHES
& GAUGES
Standard stem
FRAMES,
SUSPENSION
& FENDERS
0640-0003
0640-0106
FOOTRESTS
& LICENSE
MIRRORS
PLATE FRAMES DIRECTIONAL
•Chrome billet housings with 1/2” standard stainless steel stem
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
778
•Feature amber LED lights in each mirror head
•Patented electronic design works in conjunction with
OEM-style self-canceling or custom non-canceling turn signals
•Oval mirror heads measure 5” x 3” with 4” stems
•Saber mirror heads measure 59/16” x 21/4” with 4” stems
•Sold in pairs
Backside
NOTE: May require the use of a Load Equalizer III in conjunction with low-wattage custom lights.
PART #
DESCRIPTION
OVAL SEQUENTIAL DIRECTIONALS
0640-0002
Standard stem
0640-0003
Twisted stem
SUG. RETAIL
$398.95
398.95
PART #
DESCRIPTION
SABER NON-SEQUENTIAL DIRECTIONALS
0640-0105
Standard stem
0640-0106
Twisted stem
SUG. RETAIL
$398.95
398.95
SECTION
12
WINDSHIELDS
0640-0135
0640-0137
0640-0134
TOURING
0640-0131
LUGGAGE
0640-0141
0640-0139
0640-0201
0640-0198
0640-0140
SEATS &
SISSY BARS
0640-0142
EXHAUST
FUEL/AIR
SYSTEMS
0640-0204
ENGINE
0640-0202
0640-0205
0640-0298
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0640-0303
0640-0414
0640-0304
0640-0300
0640-0411
ELECTRICAL
LIGHTING
VIEW TECH BILLET MIRRORS
•Stems and heads are completely CNC-machined from billet aluminum (not cast), with a design that is lightweight, strong and
fully adjustable in every direction
•View Tech I features a small rectangular head for a minimalist, custom look and Joker’s “pocketed” aircraft milling design along the
stem for lightness
•View Tech II features a small round head for a minimalist, custom look and Joker’s “pocketed” aircraft milling design along the
stem for lightness
•View Tech III features a smooth oval head and smooth stem
•View Tech IV features a flamed oval head and smooth stem
•View Tech V mirrors have a super-streamlined teardrop head with 21/4” diameter lenses and Joker’s “pocketed” aircraft milling design along the stem
for lightness; fits left or right side; made to work with Joker’s JX LED front turn signals PART #s 2040-0325 and 2040-0326
•View Tech VI low brow mirrors are a sleek design statement for those who want optimal mirror size, without sacrificing looks
•View Tech VII design provides an old-school look, that includes retro-style holes along the stem for lightness; fully adjustable 31/4” diameter mirror heads
•All styles provide exceptional rear visibility due to the use of exclusive custom-made convex mirror glass
•Once the mirror is positioned, a simple twist of a wrench keeps them at the desired tension setting, unlike nonadjustable designs that fail with time
•Swivel post assembly is completely serviceable and is machined from stainless-steel alloy to ensure corrosion-free operation
•View Tech IX mirrors feature “1960’s vintage-road racer” styling
•Unique conical teardrop head that makes on-the-road adjustments super easy, while providing exceptional rear visibility due to the use of custommade convex 21/4” dia. mirror glass
•Unique “Drilled-Hole & Sculpted” milling design along the stem increases lightness; mirror dimensions: 61/6” x 35/16” x 45/16”
•A direct bolt-on fit for 72-09 Harley hand controls (including V-Rod) and most aftermarket hand controls
•Mounting hardware is included
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
VIEW TECH I
VIEW TECH VI
0640-0131
Chrome, left
$114.95 0640-0202
Chrome, left
$114.95
0640-0132
Chrome, right
114.95 0640-0203
Chrome, right
114.95
0640-0133
Black anodized, left
114.95 0640-0204
Black anodized, left
114.95
0640-0134
Black anodized, right
114.95 0640-0205
Black anodized, right
114.95
VIEW TECH II
VIEW TECH VII
0640-0135
Chrome, left or right
114.95 0640-0298
Left, chrome
114.95
0640-0137
Black anodized, left or right
114.95 0640-0299
Right, chrome
114.95
VIEW TECH III
0640-0300
Left, black
114.95
0640-0139
Chrome, left
114.95 0640-0301
Right, black
114.95
0640-0140
Chrome, right
114.95 0640-0302
Left, chrome (stock mirror position)
114.95
VIEW TECH IV
0640-0303
Right, chrome (stock mirror position)
114.95
0640-0141
Chrome, left
114.95 0640-0304
Left, black (stock mirror position)
114.95
0640-0142
Chrome, right
114.95 0640-0305
Right, black (stock mirror position)
114.95
VIEW TECH V
VIEW TECH IX
0640-0198
Smooth, chrome, left or right
119.95 0640-0411
Left, chrome
119.95
0640-0199
Smooth, black, left or right
119.95 0640-0412
Left, black
119.95
0640-0200
Finned, chrome, left or right
119.95 0640-0413
Right, chrome
119.95
0640-0201
Finned, black, left or right
119.95 0640-0414
Right, black
119.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
779
SECTION
12
WINDSHIELDS
TOURING
Back view
LUGGAGE
0640-0309
SEATS &
SISSY BARS
DS-302016
DS-302017
EXHAUST
0640-0308
0640-0326
FUEL/AIR
SYSTEMS
0640-0314
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
0640-0311
0640-0329
BAR END MIRRORS
•All mirrors are CNC-machined from billet stock; convex mirror glass for added rear viewing area
•Compact Concealed bar end mirrors feature a unique solid-mounted outer housing with a 15° swivel mirror section inside
•Super-solid units reduce vibration and make for a cleaner image in the mirror
•Never lose adjustment again from bumping mirrors; mirror is protected inside the housing like automotive mirrors
•Mounting is simple on most stock grips, with little modification required
•Swivel mirror head assembly is completely serviceable; machined stainless-steel alloy ball rides in a special polymer base to ensure super-smooth
action and corrosion-free operation
•Unique end-mounted system puts the mirror out front to give you a clear view over the handlebars
•All are sold individually and available in a chrome-plated or black-anodized finish
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
CONCEALED BAR END MIRRORS (21/4” MIRROR HEAD)
VIEWTECH VIII BAR END MIRRORS (21/4” MIRROR HEAD) (CONT)
DS-302016
Chrome-plated (ea.)
$114.95
0640-0313
Radius, black (ea.)
$119.95
DS-302017
Black anodized (ea.)
114.95
VIEWTECH VII BAR ARM MIRRORS (31/4” MIRROR HEAD)
VIEWTECH VII BAR END MIRRORS (31/4” MIRROR HEAD)
0640-0314
Left, chrome (ea.)
124.95
0640-0326
Right, chrome (ea.)
124.95
0640-0306
Chrome (ea.)
119.95
0640-0315
Left, black (ea.)
124.95
0640-0307
Black (ea.)
119.95
0640-0327
Right, black (ea.)
124.95
0640-0308
Radius, chrome (ea.)
119.95
VIEWTECH VIII BAR ARM MIRRORS (21/4” MIRROR HEAD)
0640-0309
Radius, black (ea.)
119.95
VIEWTECH VIII BAR END MIRRORS (21/4” MIRROR HEAD)
0640-0316
Left, chrome (ea.)
124.95
0640-0310
Chrome (ea.)
119.95
0640-0328
Right, chrome (ea.)
124.95
0640-0311
Black (ea.)
119.95
0640-0317
Left, black (ea.)
124.95
0640-0312
Radius, chrome (ea.)
119.95
0640-0329
Right, black (ea.)
124.95
SPECIAL MIRROR SHAFTS FOR JOKER MIRRORS
•For special applications when bolting on Joker mirrors
(except ViewTech mirrors)
•Sold each
PART #
DESCRIPTION
2404-0108 3/4” extended shaft to clear some aftermarket
master cylinders
2404-0108
SUG. RETAIL
$15.95
2404-0109
PART #
DESCRIPTION
2404-0109 Fine thread (5/16”-24) shaft for bolting OEM turn
signals to the bottom of Joker mirrors
SUG. RETAIL
$15.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
0640-0433
0640-0434
0640-0431
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
780
BAR-END
SHOOTER MIRRORS
SHOOTER MIRRORS
•CNC machined aluminum
0640-0435
•Chrome or black anodized
•Sold each
PART #
DESCRIPTION
FOR STOCK OEM-STYLE HAND CONTROLS
0640-0433
Left side, chrome
0640-0434
Left side, black-anodized
0640-0435
Right side, chrome
0640-0436
Right side, black-anodized
SUG. RETAIL
$114.95
114.95
114.95
114.95
•CNC-machined aluminum
•Will work on 7/8” to 1”
diameter handlebars
0640-0432
•Sold each
PART #
DESCRIPTION
FOR 7/8” TO 1” BARS
0640-0429
Left side, chrome
0640-0430
Left side, black-anodized
0640-0431
Right side, chrome
0640-0432
Right side, black-anodized
SUG. RETAIL
$119.95
119.95
119.95
119.95
SECTION
12
WINDSHIELDS
0640-0096
0640-0099
0640-0097
TOURING
0640-0102
LUGGAGE
0640-0403
SEATS &
SISSY BARS
0640-0406
EXHAUST
0640-0407
FUEL/AIR
SYSTEMS
CUSTOM MIRRORS
•CNC-machined from solid 6061 T-6 aluminum
•Show-chrome or black powder-coat finished
•Internal pivot provides 15° of movement of the mirror face in all directions
•Clean looking; no external fasteners on mirror head
•Oval mirrors have 31/2” stems with 41/2” x 15/8” mirror heads
•Stealth mirrors have 31/2” stems with 43/4” x 21/4” mirror heads
•Arrow mirrors have 23/4” stems with 43/4” x 21/4” mirror heads
•Chili mirrors have 31/2” stems with 45/8” x 17/8” mirror heads
•Round mirrors have 41/2” stems with 31/2” x 11/8” mirror heads
•Includes chrome or black mounting hardware
•Sold each
SUG.
SUG.
PART #
DESCRIPTION
RETAIL PART #
DESCRIPTION
RETAIL PART #
CHROME
CHROME (CONT)
BLACK
0640-0095 Oval, left
$155.95 0640-0100 Arrow, right
$147.95 0640-0403
0640-0096 Oval, right
155.95 0640-0101 Chili, left
155.95 0640-0404
0640-0097 Stealth, left
147.95 0640-0102 Chili, right
155.95 0640-0405
0640-0098 Stealth, right
147.95 0640-0422 Round, left
154.95 0640-0406
0640-0099 Arrow, left
147.95 0640-0423 Round, right
154.95 0640-0407
ENGINE
TRANSMISSION
& DRIVELINE
0640-0410
DESCRIPTION
SUG.
RETAIL
Oval, left
Oval, right
Stealth, left
Stealth, right
Arrow, left
$174.95
174.95
164.95
164.95
164.95
PART #
DESCRIPTION
BLACK (CONT)
0640-0408 Arrow, right
0640-0409 Chili, left
0640-0410 Chili, right
0640-0424 Round, left
0640-0425 Round, right
SUG.
RETAIL
$164.95
174.95
174.95
174.95
174.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
LOLLY POP MIRRORS
•Chrome billet mirrors come in two styles:
round or oval with a choice of smooth or
grooved backs as noted
•Feature high-quality, clear glass for great viewing
•Look carefully at the backs and you will see there are
no bolts or screws
•Mirror head pivots on the stem and locks in place
with two setscrews
•Short stems measure 51/2” and long stems measure 7”
•Fit right or left side
•Sold each
PART #
ROUND MIRRORS (35/8”
DS-280440
DS-280441
HANDLEBARS,
CONTROLS
& MIRRORS
DS-280440
DESCRIPTION
DIAMETER)
Smooth w/ short stem
Smooth w/ long stem
DS-280445
SUG. RETAIL
$89.95
89.95
BILLET
CLAMP-ON
MIRRORS
BRAKES
DS-280447
PART #
DESCRIPTION
OVAL MIRRORS (5” L X 25/8” W)
DS-280444
Smooth w/ short stem
DS-280445
Smooth w/ long stem
DS-280447
Grooved w/ long stem
SUG. RETAIL
$99.95
99.95
99.95
0640-0319
0640-0319
•For all 1” and
11/4” handlebars
•Available in
a polished, chrome-plated
or black-anodized finish
•Mirror head measures 21/8”
diameter with a 31/2” stem
•Single-slot design complements
forward controls
•Mounts in upright or downward
positions; for use on left or right sides
•Made in the U.S.A with domestic materials
•Sold each
PART #
1” HANDLEBARS
DS-302142
DS-302141
0640-0318
CABLES
DS-280444
DESCRIPTION
Polished
Chrome
Black-anodized
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
0640-0318
TIRES,
TUBES &
WHEELS
SUG. RETAIL
HARDWARE,
CHEMICALS
& TOOLS
$92.95
110.95
110.95
COVERS,
SECURITY
& GENERAL
DS-302141
SUG. RETAIL
$92.95
110.95
110.95
PART #
11/4” HANDLEBARS
0640-0319
0640-0320
0640-0321
DESCRIPTION
Polished
Chrome
Black-anodized
781
SECTION
12
WINDSHIELDS
TOURING
20-21705
20-34820
20-34822
LUGGAGE
20-21709
SEATS &
SISSY BARS
EXHAUST
20-21708
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
20-34830
0640-0075
DIE-CAST MIRRORS
•Mirrors feature chrome-plated die-cast heads with chrome steel stems
•Available in several sizes and styles
•Sold each unless noted
PART #
DESCRIPTION
SUG. RETAIL
35/8” X 5” MIRRORS
20-21705
Long stem bolt-on, plain face (pr.)
$25.95
20-21706
Short stem bolt-on, plain face (pr.)
26.95
20-21708
Short stem bolt-on, plain face
13.95
20-21709
Short stem bolt-on, scrolled face
13.95
3” X 5” MIRROR
0640-0336
Lil’ cruiser; bolt-on
12.95
PART #
2” X 41/2” MIRRORS
20-34820
20-34822
20-34830
4” X 4” MIRRORS
0640-0076
0640-0075
DESCRIPTION
SUG. RETAIL
H-D style, bolt-on
H-D style, clamp-on
Oval head, bolt-on
$13.95
13.95
11.95
Maltese; chrome split stem, right
Maltese; chrome split stem, left
31.95
31.95
ELECTRICAL
CUSTOM MIRRORS
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
20-31701
CABLES
•High-quality die-cast mirrors feature “Live to Ride...Ride Free” script
•Chrome or chrome/gold eagle embossed on the back of the mirror
•Choose from right- or left-hand versions (for correct facing of embossed eagle)
•Allen wrench for setscrew, chromed acorn nut and necessary mounting hardware included
•Mirror face measures approximately 5” x 33/4”
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
20-31701
Chrome, right (ea.)
$23.95 20-31704
Chrome/gold, right (ea.)
20-31703
Chrome, left (ea.)
23.95 20-31707
Chrome/gold, left (ea.)
SUG. RETAIL
$30.95
30.95
BRAKES
TANKS &
OIL FILTERS
20-34812
20-34810
DASHES
& GAUGES
20-06804
20-34800
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
782
20-06810
STAMPED STEEL MIRRORS
•High-quality mirrors feature chrome-plated
heads and stems
•Fully adjustable, for right or
left side applications
•Available in various sizes and styles
PART #
DESCRIPTION
BOLT-ON
20-34800
H-D style, 33/8” X 5” w/ 4” stem
20-34810
H-D style, 2” X 41/2” w/ 4” stem
CLAMP-ON
20-34812
H-D style, 2” X 41/2” w/ 4” stem
20-06808
SUG. RETAIL
$8.95
8.95
PART #
DESCRIPTION
CLAMP-ON (CONT)
20-06804
Round style, 4” w/ 4” stem
20-06808
20-06810
9.95
SUG. RETAIL
$8.95
8.95
8.95
SECTION
941040
12
WINDSHIELDS
0640-0426
TOURING
0640-0427
LUGGAGE
941050
EXTREME
MINI
TEARDROP
MIRRORS
DESCRIPTION
Chrome
Black chrome
MINI RECTANGULAR MIRROR
•Designed with classic
Harley styling
•Extra-heavy construction in highly
polished chrome
•43/4” x 23/4” flat lens
•Universal stem; fits right or left side
•Unique teardrop housing with a lustrous
chrome finish
•Virtually vibration free
•4.2” x 2.4” flat lens
•67/8” stem with universal 10mm mount
•Sold each
PART #
0640-0426
0640-0427
SEATS &
SISSY BARS
MINI
AMERICAN MIRRORS
SUG. RETAIL
$32.95
30.95
PART #
941040
941050
941060
DESCRIPTION
5” short stem
5” cut-out stem
61/4” long stem
SUG. RETAIL
$30.95
30.95
30.95
•Classic duplex chrome finish
•Ideal mini rectangular shape to complement
today’s cruisers and modified Big Twins
•The look is classic, custom and aggressive
•4.10” x 2.50” flat lens
•5” stem; fits right or left
•Sold each
PART #
941095
DESCRIPTION
Mini rectangular mirror
SUG. RETAIL
$30.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0640-0122
0640-0120
ELECTRICAL
0640-0121
BAR END MIRRORS
LIGHTING
•Convex mirrors with automotive-quality glass
•6061 T-6 aluminum CNC-machined billet construction
0641-0013
•Black anodized finish with stainless hardware
•Rubber mounted to reduce vibration
•Will fit most handlebar/clip-ons with an outer diameter of 7/8” (requires 3/8” of bare bar outboard of the grip/throttle assembly)
•Optional internal mirror adapter kit allows mirror to mount to internal end of smooth bore, hollow handlebars with i.d. as small
as 12mm (.475”) and as large as 19mm (.750”)
•Blindsight mirror intended to be used in conjunction with left-side mirror or stock mirrors to help reveal blind spots
•Sold each
PART #
DESCRIPTION
3” DIAMETER HINDSIGHT MIRROR
0640-0120
Hindsight bar end mirror
0640-0121
Hindsight LS bar end mirror
0641-0013
Internal mirror adapter
0641-0014
Repl. 3” dia. glass kit
SUG. RETAIL
$74.95
89.95
19.95
12.95
PART #
DESCRIPTION
2” DIAMETER BLINDSIGHT MIRROR
0640-0122
Blindsight mirror
0641-0013
Internal mirror adapter
0641-0015
Repl. 2” dia. glass kit
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
SUG. RETAIL
$49.95
19.95
9.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
MILLER’S
MIRROR CLAMP
CHROME
BILLET RIGHT
SIDE MIRROR
ADAPTER
•Allows custom mirrors to be mounted on
handlebar controls that have a tight clearance
between the master cylinder and mirror mount
•Moves mirror up and away from
master cylinder
•Sold each
PART #
DESCRIPTION
DS-302030 For 96-09
handlebar controls
SUG. RETAIL
$18.95
•Classy chrome-plated
two-piece clamp by
Miller’s Custom Cycle
•Great for mounting Harley-type mirrors
to 1” handlebars
•Versatile – can be used on either the right
or left side
•1” inside diameter fits most safety bars, frame
tubes and handlebars
•For use when late-style H-D controls are not
used or when mirror position is not functional
PART #
DESCRIPTION
DS-302020 Miller’s mirror clamp
SUG. RETAIL
$10.95
FOOTRESTS
& LICENSE
PLATE FRAMES
SOCKET-HEAD
PIN FOR MIRROR
MOUNTING HOLE
•This chrome sockethead pin fills the unused mirror mounting hole
on the clutch or brake lever perches of
82-09 H-D
•Matches our custom socket-head pivot pins
PART #DS-273891 and comes complete with
a retaining ring
PART #
DS-302165
DESCRIPTION
Socket head pin
SUG. RETAIL
$8.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
783
13
784

Untitled - Customs

Transcription

Similar documents

Untitled - Customs

catalog - BicycleDesigner.com