Untitled - Customs

17
945
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
946
Foot controls
and front
motor mounts
LOWLIFE CHASSIS KIT
•Award-winning original design
featuring all radial bends
•Chassis constructed
of DOM tubing
with a .157/.187
wall thickness
•Features a 40° neck rake
with 7” out stretch
•Machined neck stem ready to accept
press-in bearing races
•Solid machined top motor mount triangulated
for strength
Hidden oil tank
•Machined 1/2” thick one-piece transmission plate
•Engine and transmission centered in chassis for
excellent balance
•Right-side drive only; accommodates wide tires and
retains a well-balanced motorcycle
•Narrowed frame rails for better cornering, even at low
ride height; low seat height for lower center of gravity
•Welded-on mount tabs allow 84-99 Softail-style forward
controls to be mounted to chassis
•Oil tank hidden under transmission for better weight distribution
•Battery mounts completely rubber isolated
•Hidden compressor mount is part of the battery mount
•A chrome Legend Air Suspension is included and installs flush with bottom of frame
•Swingarm features triangulated high-strength design, DOM tubing all-radial bends, 1” stainless rear
axle, flush axle caps with hidden fasteners, two stainless pivot bolts and pivot axis tube, pivot bearings and spacers
•Swingarm accommodates 240, 280 or 300mm rear tire with a full-width belt
•Required primary drive sold separately
PART #
DESCRIPTION
0501-0061
Lowlife chassis kit
Legend air suspension
SUG. RETAIL
$4,950.00
Hidden oil tank
HARDLIFE RIGID
CHASSIS KIT
•Award-winning original design
featuring all radial bends
•Chassis constructed of DOM tubing
with a .157/.187 wall thickness
•Features a 40° neck rake with 7” out stretch
•Machined neck stem ready to accept
press-in bearing races
•Solid machined top motor mount triangulated
for strength
•Machined 1/2” thick one-piece transmission plate
•Engine and transmission centered in chassis
for excellent balance
•Right-side drive only; accommodates wide tires and
retains a well-balanced motorcycle
•Narrowed frame rails for better cornering, even at low
ride height; low seat height for lower center of gravity
•Welded-on mount tabs allow 84-99 Softail-style forward
controls to be mounted to chassis
•Oil tank hidden under transmission for better weight distribution
•Battery mount completely rubber isolated
•Flush axle caps with hidden fasteners
PART #
•Rear 1” stainless axle
0501-0062
•Required primary drive sold separately
Foot controls
and front
motor mounts
DESCRIPTION
Hardlife chassis kit
SUG. RETAIL
$3,450.00
PRIMARY MOTOR PLATE AND BELT KIT
FOR LOWLIFE AND HARDLIFE CHASSIS KITS
•Features an extended length one-piece motor plate
•Comes with belt guard, rear pulley cover, proprietary
3” Gates extended primary belt and all required
mounting hardware
•Works with Independent Cycle’s Lowlife and Hardlife
chassis kits only (except Hardlife RSD rigid frame)
NOTE: Will require the separate purchase of a 3” front
belt drive pulley and a 3” belt drive clutch assembly.
PART #
1120-0180
DESCRIPTION
Primary drive
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$1,250.00
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
Primary, pulleys,
belt, axles and
master cylinder
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
Hidden oil tank
LIGHTING
HARDLIFE RSD RIGID FRAME KIT
•Radial bent original frame constructed of DOM tubing with
a .157/.187 wall thickness
•Features a 40° neck rake with 7” out stretch
•Machined neck stem accepts press-in bearing races
(no need for fork cups)
•Solid machined, triangulated top motor mount
•Low seat height for lower center of gravity
•Machined 1/2” thick transmission plate
•Engine and transmission designed on centerline of frame for excellent balance
•Accepts Evo motors or Twin Cam A motors with adapter plate PART #DS-111120
•Accommodates 240, 280 or 300mm rear tire with full-size belt or chain
•Primary features an extended-length one-piece billet backing plate and comes with both pulleys, exclusive 3” Gates® belt and Rivera Pro Clutch pack,
and mid-foot or forward controls including PM master cylinder
•Kit also includes a 1” 1144 stress-proof axle, flush axle caps, neck bearings, hidden rubber-mounted oil tank, rubber-mounted battery mount and
stainless steel splash shield
PATENT PENDING
PART #
0501-0046
DESCRIPTION
Frame w/ forward controls
SUG. RETAIL
$7,999.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
SLITHER GAS TANK
•High-quality 16-gauge steel gas tank designed
by Jim Nasi Customs
•Designed to fit Independent Cycle Lowlife or Hardlife frames
•Contoured to hug radius of radial backbone
•Includes flush tank mounts, petcock bung and crossovers
welded in place
•Petcock and gas cap not included
•Accepts a 3/8” NPT petcock (sold separately)
•Made in the U.S.A.
PART #
0701-0083
DESCRIPTION
Slither gas tank
SUG. RETAIL
$1,699.95
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
947
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
BAGGER-STYLE
FRAME
•The closest frame
to stock made in the
aftermarket industry
•Designed to accept all
OEM parts without any
modifications needed
•Handcrafted using the
highest-quality CNC’d and laser-cut
components, allowing the builder a
painless bike build
•The strength and quality of this frame
makes it like no other in the industry
•Features stock rake and stock stretch
•Accepts a 130-150mm rear tire, or 200mm
tire with any 200mm kit for a stock frame
•Main frame rails are 11/8” tubing
•Use with any Evolution or Twin Cam
FLT drivetrain
•Rear motor mounts are CNC-machined
•Accepts stock gas tank, fenders, seat, axle,
covers and accessories; stock pivot shaft and
components; stock front end; stock battery
box; stock or Chopper Guys custom billet
swingarm; or 200mm wide tire kit for a stock frame
NOTE: Swingarm not included, see page 950 for custom billet swingarm.
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
PART #
0501-0049
DESCRIPTION
Bagger-style frame
SUG. RETAIL
$2,967.95
FAT GUY 200MM TIRE
BAGGER FRAME KIT
•Run 200mm tire on all
bagger models
•CNC-machined, lasered
and formed components
•Features a 30° rake
•1” extended, billet steel swingarm,
accepts 1” axle
•Lowered 1” to provide a lower center
of gravity for weight ratio
•Symmetrically widened for balance
•Accepts stock or custom Evolution
or Twin Cam FLT style motor,
transmission, front end assembly
and gas tank
NOTE: Swingarm bushing kit
PART #1302-0167, sold separately.
NOTE: Transmission not included.
BRAKES
NOTE: Minor gas tank modifications required.
PART #
0501-0050
DESCRIPTION
200mm tire bagger frame kit
SUG. RETAIL
$3,757.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
948
FAT GUY SPECIAL
FXST/FLST-STYLE FRAME KIT
•Features 11/8” diameter main frame tubes with
a 35° rake and 13/4” stretch
•Frame has a 5/8” offset and is 11/4” wider than
a stock frame
•Pro-style billet tank mounts and pro-style neck
accepts stock triple trees
•Includes swingarm with billet axle plate, axle
kit, axis tube, pivot bearings, bolts
and spacer washers
•Frame will accept a 180 tire on a 51/2”-6” rim
or a 200 tire with the use of a 1/4” offset kit
(PART #DS-199500)
•Made in the U.S.A.
NOTE: See Section 4 for custom seats and seat
pans for Chopper Guys frames.
NOTE: See Section 15 for oil tanks.
PART #
DESCRIPTION
DS-111187 Special FXST/
FLST-style frame
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$2,375.95
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
FAT GUY RIGID BOBBER FRAME
•Lightweight construction
•CNC billet construction of frame components
•Accept stock FXST/FLST-style oil tank and rear caliper
•Has 0” stretch at the backbone with a 30° rake in the neck
•Accepts chain or OEM drive belt set-up
EXHAUST
NOTE: Rigid frames will accept Evo and Shovelhead engines,
or Panheads with upper mount modifications.
PART #
DESCRIPTION
SUG. RETAIL
0501-0048
Bobber 130 Rigid frame
$1,662.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0501-0025
ELECTRICAL
LIGHTING
TWIN CAM FXR-STYLE FRAME KITS
•Main frame rails are 11/4” tubing with a 21/2” square backbone
•Feature a 28° rake and 1” backbone stretch
•Will work with Twin Cam “A” motor and FLT complete drivetrain
•Forward or mid control mounts included, along with a battery box cover
•Wide-tire kit will accept up to a 180mm tire with stock 11/2” belt
0501-0027
•Wide-tire and standard-width kits accept stock-length front ends,
stock fuel tanks and most FXR stock components
•Wide-tire frame is symmetrically widened with engine offset 5/8” to the left;
requires custom seat
•Standard-width frames available in kit or frame-only versions
•Kits include custom billet swingarm, pivot shaft and axle with hardware (unless otherwise noted)
•All are rubber mounted
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
WIDE-TIRE FRAME KIT
STANDARD-WIDTH FRAME KITS
0501-0025
Twin Cam FXR frame kit w/ billet swingarm
$2,500.95 0501-0027
Twin Cam FXR frame only (no swingarm)
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
SUG. RETAIL
$1,662.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
240 FXR DROP SEAT FRAME KITS
•The first frame kit of its kind!
•Set up to run Twin Cam “A” or Evolution drivetrains with
a 240 wide tire and dropped seat
•Features include a 21/2” square backbone, side rails that
have been lowered 2”, 11/4” frame rails, dual swingarm
shock mounts and a billet swingarm
•Add stock or aftermarket FXR model components
•Has both forward and mid control mounts
•Accept custom side covers, stock oil tanks and stock
or aftermarket gas tanks
•CNC-milled mounts and brackets are precision formed
•28° rake
•1/2” offset chain drive kit required
PART #
0501-0059
DESCRIPTION
240 FXR Twin Cam frame kit
SUG. RETAIL
$2,767.95
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
949
SECTION
17
WINDSHIELDS
TOURING
PRO-STREET DROP-SEAT FXR FRAME KIT
•The frame dedicated to those who live in the fast lane
•Includes a 30° rake, 3” lowered neck height, 2” backbone stretch and
a drop-seat
•Frame rails are 11/4”, .120 wall with a 21/2” square, .120 wall
Pro-Street backbone
•Precision formed and CNC-milled mounts and brackets with forward
and mid-control mounts
•Accepts Twin Cam “A” or Evolution FXR/FLT drivetrains
•Accepts Buell or any 29”-30” long front end
•Kit also includes billet swingarm, pivot shaft and axle kit (pivot shaft
is 3/4” and axle is 1”)
PART #
DESCRIPTION
SUG. RETAIL
0501-0066
FXR Pro Street
$2,764.95
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
0501-0024
TRANSMISSION
& DRIVELINE
DS-111115
GASKETS
& SEALS
ELECTRICAL
DS-111127
LIGHTING
FXR FRAME KITS
•Rubber mount like stock
•Stronger and lighter than stock
•Kit includes a rear axle
•Frame weighs 50 lb. and swingarm weighs 15 lb.
•Pro-Street frame will accept a 180 series rear tire with a stock
11/2” rear belt
•Pro-Street specs – 2” stretch, 33° rake, 5/8” offset
•The standard FXR frame has 1” stretch, 28° rake
•Accepts stock FXR accessories
•Brake adapter PART #DS-111167 required to mount OEM
brake caliper on Chopper Guys steel billet swingarm
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-111115 Wide FXR Pro-Street w/ billet swingarm
$2,500.95
0501-0024 Standard FXR frame w/ billet swingarm
2,166.95
DS-111127 Standard FXR frame only
1,662.95
DS-111167 Brake adapter
42.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
950
1301-0058
1302-0167
CUSTOM SWINGARM
•CNC-machined billet steel
•More rigid than a stock swingarm; improves handling
•Fits Chopper Guys Bagger-style frame (PART #0501-0049)
and 82-01 OEM FLHT/FLHX/FLHR/FLTR frames
•Accepts stock pivot shaft and components; 1” axle not included
PART #
DESCRIPTION
1301-0058
Custom swingarm
1302-0167
Bushing kit
FXR BRAKE ADAPTER
SUG. RETAIL
$847.95
285.95
•Brake adapter required to mount OEM
brake caliper on Chopper Guys FXR steel
billet swingarm
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-111167
For 88-94 FXR
$42.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
17
WINDSHIELDS
TOURING
2406-2610
LUGGAGE
2406-2612
2005-2610
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
0912-2610
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
XL RIGID FRAMES
•Available in three styles for use with 86-03 XL motors
•PART #2406-2610 has 0” stretch and 30° rake; uses stock length XL front fork (31”), accepts a flat-side Fat Bob gas tank and uses a 5” or 6” rear fender
•PART #2406-2611 has a 2” stretch in the backbone and 4” stretch in the down tubes with a 40° rake; requires a 12”-over (39”) front fork, does not have
fuel tank mounts and uses a 5” or 6” rear fender
•PART #2406-2612 has a 3” stretch in the backbone and 6” stretch in the down tubes with a 40° rake; requires 15”-over (42”) front fork, does not have fuel
tank mounts and uses a 5” or 6” fender
•Frames are all 1” tubing and include a 3/4” rear axle
•Accept a 130-series tire with a belt drive or a 150-series tire with a chain drive
•Use PM or GMA rigid rear brake caliper kits
•Will also accept XL forward controls or stock mid-controls and most exhaust systems
•Frames will require neck post bearing cups, oil tank and battery box (must be purchased separately)
PART #
DESCRIPTION
SUG. RETAIL
XL FRAMES
2406-2610
0” stretch frame
$844.95
2406-2611
2”/4” stretch frame
1,078.95
2406-2612
3”/6” stretch frame
1,078.95
ACCESSORIES
2005-2610
Raw oil tank
170.95
0912-2610
Battery box
53.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
DRESSER FRAME
HARDWARE,
CHEMICALS
& TOOLS
•OEM-style 98-06 Dresser frame with 26° rake
•Accepts Twin Cam 88 and Evo-style engines with matching
FLT/FLHT transmissions
•Accepts stock sheet metal, forks, swingarm and suspension
•Made in the U.S.A.
PART #
0501-0063
DESCRIPTION
98-06 Dresser-style frame
SUG. RETAIL
$1,999.95
All part numbers in BOLD MAGENTA are new for 2009.
COVERS,
SECURITY
& GENERAL
951
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
0501-0064
0501-0065
ENGINE
TRANSMISSION
& DRIVELINE
EVO CFL 200 FRAME KIT
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
•Fits Evo-style engines, Evo Softail-style 5-speed
transmission and up to a 200mm tire
•Hand-built and sculpted from cold rolled 1018 steel
•Feature 11/8” DOM tubing and 0.120” wall thickness
•38° rake
•PART #0501-0064 has a 2” stretch in the backbone and 2” stretch in the down tubes
•PART #0501-0065 has a 2” stretch in the backbone and 4” stretch in the down tubes
•Accept up to 200mm tire
•Include polished 3-qt. oil tank, battery box, neck badge, fork stop kit, rear 3/4” axle and polished axle covers
•Made in the U.S.A.
NOTE: Webbed neck gusset not included.
PART #
DESCRIPTION
0501-0064
2” up/2” out stretch frame
SUG. RETAIL
$1,999.95
PART #
0501-0065
DESCRIPTION
4” up/2” out stretch frame
SUG. RETAIL
$2,099.95
CABLES
BRAKES
0501-0055
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
952
BIG TWIN BOBBER STYLE RIGID FRAMES
•Made with 11/4” DOM tubing (.120” wall thickness)
•Features 0” stretch in backbone and down tubes; 30° rake
•Designed with an hourglass style neck with internal fork stop
•Includes CNC OEM styled axle adjusters plates, neck gussets, motor mounts and transmission mounting brackets
•Can be run with 4- or 5-speed transmissions
•Frames will accept all Big Twin style motors except Twin Cam
•Will accept direct exchange of FXST/FLST components; some welding will be required
•PART #0501-0055 will accept 130-series tire with a belt drive or a 180-series tire with a chain drive
•PART #0501-0060 will accept 180-series tire with a belt drive or a 200-series tire with a chain drive
NOTE: Will require a 86-99 FXST/FLST length rear axle and axle adjusters with course thread.
PART #
DESCRIPTION
SUG. RETAIL PART #
0501-0055
Big Twin bobber style frame
$1,333.95 0501-0060
DESCRIPTION
Big Twin bobber 200 style frame
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$1,333.95
SECTION
17
WINDSHIELDS
0503-0046
0503-0047
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
DS-111055
FUEL/AIR
SYSTEMS
ENGINE
DS-111061
TRANSMISSION
& DRIVELINE
SOFTAIL WIDE DRIVE KITS
•Available in two styles: one style
keeps the transmission in
the center of the bike (stock
DS-111056
location), and the other
offsets the transmission;
both styles are available
in a hidden-axle
or open-axle design
•Come in two sizes: for
use with 200mm tires
or 240mm tires
•Wide drive kits require
an experienced
mechanic to install
them; installation
of kits that keep the
transmission in the stock
location requires the disassembly
of the transmission to replace the
main shaft and 5th gear (mainshaft and 5th gear included)
•Require the removal of the cast fender strut ears; maintain stock ride height
•Wide drive kits for 00-07 models include swingarm, 3/4” axle, fender struts, spacers, front pulley, all required hardware and instructions
•Wide drive kits for 88-99 models include swingarm, 3/4” axle, fender struts, transmission offset mount, shaft extensions, spacers and other
required hardware and instructions
•200mm kits use 11/2” belt and require a 9” fender; the 240mm kits use a 11/8” belt (07 models use a 20mm belt), require offset 8.5” wheel and
require a 101/2” fender (sold separately)
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
NOTE: Stock calipers on 88-99 applications will not clear rim; require custom calipers.
NOTE: Installation of Wide Drive kits requires a trained technician.
KITS WITH TRANSMISSION IN STOCK LOCATION
PART #
DESCRIPTION
OPEN-AXLE DESIGN
0503-0046
For 07 FLST, FXST, 240mm tire
DS-111050
For 00-05 FXST, 00-06 FLST, 200mm tire
DS-111052
For 00-06 FXST, FLST, 240mm tire
DS-111051
For 90-99 FXST, FLST, 200mm tire
DS-111053
For 90-99 FXST, FLST, 240mm tire
HIDDEN-AXLE DESIGN
0503-0047
For 07 FLST, FXST, 240mm tire
DS-111061
For 00-05 FXST, 00-06 FLST, 200mm tire
DS-111062
For 00-06 FXST, FLST, 240mm tire
DS-111059
For 90-99 FXST, FLST, 200mm tire
DS-111060
For 90-99 FXST, FLST, 240mm tire
SUG. RETAIL
$3,475.95
3,626.95
3,626.95
3,626.95
3,626.95
KITS WITH TRANSMISSION OFFSET
PART #
DESCRIPTION
OPEN-AXLE DESIGN
DS-111055
For 88-99 FXST,
DS-111057
For 88-99 FXST,
HIDDEN-AXLE DESIGN
DS-111056
For 88-99 FXST,
DS-111058
For 88-99 FXST,
3,475.95
3,626.95
3,626.95
3,626.95
3,626.95
240MM SOFTAIL WIDE DRIVE KITS
WITHOUT STRUTS
•Kits include wide swingarm, 3/4” axle, axle covers, shaft extensions,
transmission mount (for 90-99 only), spacers and required hardware
•Does not include rear fender struts; designed for use with RSD
Vintage Rear Fender Kit, PART #1401-0178, or custom 101/2” rear
fender and custom struts
•Installation requires the removal of stock fender struts
•Requires the use of a 11/8” or narrower rear belt
PART #
DESCRIPTION
SUG. RETAIL
0503-0044
For 00-06 FXST, FLST models
$3,368.95
0503-0045
For 90-99 FXST, FLST models
3,368.95
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
FLST, 200mm tire
FLST, 240mm tire
$2,311.95
2,355.95
FLST, 200mm tire
FLST, 240mm tire
2,311.95
2,355.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
953
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
0503-0057
0503-0058
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
0503-0021
0503-0059
ENGINE
200MM WIDE DRIVE KITS FOR DRESSERS
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
•A revolutionary new customization for Dressers; makes
a Dresser look unlike any other bike on the road
3501-0358
•The easiest way to install a wide drive; bolt-on kit requires no modification
•Allows owner to retain saddlebags and stock exhaust; tourpak and backrest
will require OEM detachable docking hardware to properly mount
•Kit includes a wide swingarm with a 1” rear axle, rear fender, fender strut covers, saddlebag
support, billet aluminum primary spacers, transmission components, shaft extension and
all necessary brackets and hardware; 07-08 kits do not require replacing the transmission
shaft, gear, belt or pulley
•Accepts 16” x 5.5” or 18” x 5.5” rear wheels and most tires up to 200mm wide
•97-06 models require a 11/8” belt and rear pulley
•Models with 18” rear use OEM brake caliper; models with 16” rear require a smaller
1401-0189
1401-0188
custom brake caliper
•Installation of tourpak or backrest will require OEM detachable docking hardware and docking kit PART #3550-0075 (sold separately)
•Air valve relocation bracket relocates the air fill valve for the rear suspension when using Wide Drive kit; available separately
NOTE: Installation of Wide Drive kits requires a trained technician.
PART #
DESCRIPTION
SUG. RETAIL
WIDE DRIVE KITS
0503-00571
For 07-08 FLHT, FLHR and FLTR models,
OEM-style fender
$3,520.95
For 07-08 FLHT, FLHR and FLTR models,
0503-00581
custom-style fender with taillight assembly
4,142.95
For 07-08 FLHT, FLHR and FLTR models,
0503-00591
smooth-style fender
3,520.95
0503-0021
For 02-06 FLHT, FLHR and FLTR models,
OEM-style fender
5,457.95
0503-0020
For 01 FLHT, FLHR and FLTR models,
OEM-style fender
5,457.95
0503-0019
For 97-00 FLHT, FLHR and FLTR models,
OEM-style fender
5,457.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
0431-0317
1401-0190
PART #
DESCRIPTION
ACCESSORIES
3501-0358
Saddlebag relocation kit for 07-08 FLHT,
FLHR and FLTR models
0431-0317
Air valve relocation bracket for 97-08 FLHT,
FLHR and FLTR models
REAR FENDERS FOR 97-06 FLHT, FLHR, FLTR
1401-0188
Repl. OEM-style fender
1401-0189
Optional smooth-style fender
1401-0190
Optional custom-style fender
w/ taillight assembly
1
SUG. RETAIL
$500.95
47.95
796.95
796.95
1,502.95
Requires saddlebag relocation kit, PART #3501-0358, in order to reuse
stock saddlebags.
1401-0185
1401-0186
1401-0187
WIDE
FENDER KITS
FOR DRESSERS
•The easiest way
to install a wide
fender; bolt-on kit
requires no modification
•Allows owner to retain stock saddlebags and exhaust
•Kits include one-piece, 14-gauge steel wide fender, fender strut covers, frame extension, support bracket and all necessary hardware
•Accept tires up to 200mm with a wide swingarm conversion or 180mm tires with a chain drive conversion
•Three styles available
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
•Installation of tourpak and backrest
FOR 97-07 FLHT, FLHR, FLTR (CONT)
will require OEM detachable docking FOR 97-07 FLHT, FLHR, FLTR
1401-0185 OEM, taillight cutout
$1,395.95 1401-0187 Custom w/ taillight assembly $2,115.95
hardware and docking kit
1401-0186 Smooth, no taillight cutout
1,395.95
PART #3550-0075 (sold separately)
HARDWARE,
CHEMICALS
& TOOLS
DOCKING KIT FOR WIDE FENDERS
COVERS,
SECURITY
& GENERAL
•Allows use of OEM mounting brackets for tourpaks and backrests on Custom Valley wide fenders for Dressers
•Stainless steel construction
PART #
DESCRIPTION
SUG. RETAIL
3550-0075
Docking kit
$369.95
954
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
2406-1543
SEATS &
SISSY BARS
0503-0060
EXHAUST
FUEL/AIR
SYSTEMS
WIDE DRIVE KITS FOR DYNA GLIDE
•With these kits you can install a 240mm or
200mm tire using the stock belt on a Dyna Glide and still keep everything in the center of the bike
•All kits (except 06-08) include swingarm, 3/4” axle, fender struts, shaft extensions, spacers and all required
hardware and instructions; 06-08 kits include swingarm, 1” axle, fender struts, spacers and all required
hardware and instructions (requires the removal of the cast fender strut ears)
•Installation requires the disassembly of the transmission to replace the main shaft and frame
modifications; the 240mm kits require some clearancing on the inner primary
•Will require the use of a custom wide rear fender (sold separately)
ENGINE
TRANSMISSION
& DRIVELINE
NOTE: Installation of Wide Drive kits requires a trained technician.
PART #
240MM KITS
0503-0060
2406-1536
2406-1535
2406-1534
DESCRIPTION
06-09
02-05
00-01
96-99
Dyna
Dyna
Dyna
Dyna
Glide;
Glide;
Glide;
Glide;
SUG. RETAIL
requires
requires
requires
requires
a
a
a
a
20mm wide belt
11/8” wide belt
11/8” wide belt
11/8” wide belt
$3,475.95
3,733.95
3,733.95
3,733.95
PART #
200MM KITS
2406-1543
2406-1542
2406-1541
2406-1537
DESCRIPTION
02-05
00-01
96-99
96-99
Dyna
Dyna
Dyna
Dyna
Glide;
Glide;
Glide;
Glide;
SUG. RETAIL
requires
requires
requires
requires
a
a
a
a
11/8”
11/8”
11/8”
11/2”
wide
wide
wide
wide
belt
belt
belt
belt
$3,288.95
3,288.95
3,288.95
3,324.95
GASKETS
& SEALS
ELECTRICAL
200MM WIDE DRIVE KIT FOR FXR
LIGHTING
•With these kits you can install a 200mm tire using a 11/8” rear belt and still
keep everything in the center of the bike
•Kits include swingarm, 1” axle, billet aluminum primary
spacer with hardware, all necessary transmission parts, shaft
extension for compensating sprocket, starter with hardware
and detailed instructions
•Will require the use of a custom wide rear fender (sold separately)
HANDLEBARS,
CONTROLS
& MIRRORS
NOTE: Installation of Wide Drive kits requires a trained technician.
PART #
0503-0043
DESCRIPTION
For 90-94 FXR
CABLES
SUG. RETAIL
$3,733.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
0503-0039
FOOTRESTS
& LICENSE
PLATE FRAMES
300MM WIDE TIRE KIT
•300mm bolt-on kits have everything you need to customize the entire back half of your bike
•Includes Baker Right-Side-Drive 6-Speed Complete Transmission Assembly, in your choice of black or polished finish
•Kits also include a complete Harley-Davidson-style black powder-coated swingarm assembly that includes a 1” 4140 steel axle
and polished stainless steel axle spacers for 280mm or 300mm wheels; black powder-coated subframe; polished stainless steel
splashguard and a 13-gauge steel 13” paint-ready fender
PART #
DESCRIPTION
•All the necessary hardware and fasteners to easily complete the project
FOR 00-06 SOFTAILS
are included with the kit – even a comprehensive instruction manual,
0503-0039 Black RSD unit w/ cable clutch, pulley
complete with photos
0503-0040 Black RSD unit w/ hydraulic clutch, pulley
NOTE: Designed for use with Xtreme Machine or Performance
0503-0041 Polished RSD unit w/ hydraulic clutch, sprocket
Machine wheels; additional centering and spacing is necessary
FOR 90-99 SOFTAILS
for fitment with wheels from other manufacturers.
0503-0042 Polished RSD unit w/ hydraulic clutch, sprocket
NOTE: Kit does not include wheels or taillight/license plate assembly.
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$6,994.95
6,994.95
6,994.95
6,994.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
955
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
0503-0079
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
956
BAGGER MO’TIRE 180 REAR TIRE KITS
•The ultimate MO (makeover) for a bagger
•Allows the use of a 180 rear tire while using an OEM belt
•Riders get the cleanliness and reliability of a belt drive without a lot of the work required
with other wide tire kits
•Does not require swingarm replacement or disassembly of the transmission
•Kits include stretched fender, Curvaceous upper filler panels, lower filler panels, pulley,
all necessary mounting hardware and gaskets
•No need for an extended main shaft or offset primary
•Quick, easy installation with the use of Klock Werks Signature E-coated, predrilled, stamped
steel fender and fillers
•Available in 6” or 2” stretch (over stock length) with or without frenched license
plate pocket
•Requires purchase of H-D OEM belt PART #40024-07 for 97-06 models
•Also requires purchase of an 18” x 5.5” rear wheel with a 3.485” pulley side hub
•Detachable 180 tire kits are for use with detachable Tour-Pak®; features slotted fillers and
requires the use of Tour-Pak® Rack
•Tour-Pak® Rack accepts OEM Tour-Pak® and features the Klock Werks logo
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 08 FLHT, FLHR, FLTR W/ STOCK 6-SPEED
0503-0082
6” stretch, frenched license; detachable
0503-0078
6” stretch, frenched license; non-detachable
0503-0084
6” stretch, smooth; detachable
0503-0080
6” stretch, smooth; non-detachable
0503-0081
2” stretch, frenched license; detachable
0503-0077
2” stretch, frenched license; non-detachable
0503-0083
2” stretch, smooth; detachable
0503-0079
2” stretch, smooth; non-detachable
FOR 07 FLHT, FLHR, FLTR W/ STOCK 6-SPEED OR 97-07 W/ S&S 6-SPEED W/ 34-T FRONT PULLEY
0503-0074
6” stretch, frenched license; detachable
0503-0070
6” stretch, frenched license; non-detachable
0503-0076
6” stretch, smooth; detachable
0503-0072
6” stretch, smooth; non-detachable
0503-0073
2” stretch, frenched license; detachable
0503-0069
2” stretch, frenched license; non-detachable
0503-0075
2” stretch, smooth; detachable
0503-0071
2” stretch, smooth; non-detachable
FOR 97-06 FLT, FLHT, FLHR, FLTR W/ STOCK 5-SPEED OR BAKER DD6
0503-0066
6” stretch, frenched license; detachable
0503-0062
6” stretch, frenched license; non-detachable
0503-0068
6” stretch, smooth; detachable
0503-0064
6” stretch, smooth; non-detachable
0503-0065
2” stretch, frenched license; detachable
0503-0061
2” stretch, frenched license; non-detachable
0503-0067
2” stretch, smooth; detachable
0503-0063
2” stretch, smooth; non-detachable
FRENCHED LICENSE PLATES
2030-0307
Chrome lighted
2030-0308
Chrome non-lighted
2030-0309
Raw non-lighted
ACCESSORIES
1501-0249
Upright passenger backrest
3516-0058
Detachable Tour-Pak® Rack
2030-0307
All part numbers in BOLD MAGENTA are new for 2009.
3516-0058
SUG. RETAIL
$1,584.95
1,584.95
1,584.95
1,584.95
1,584.95
1,584.95
1,584.95
1,584.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
1,884.95
199.95
99.95
59.95
229.95
299.95
SECTION
17
WINDSHIELDS
1111-0001
TOURING
TXR STABILIZERS
•CNC-machined from
6061 T-6 aluminum
•Improve handling by triangulating
motor and transmission in the
chassis to eliminate frame wobble
at high speeds and while cornering
•Adjustable intermediate member
with integrated patented Gooden-Tite
polyurethane and aluminum
isolator bushings
•Open plate design with ventilating air scoops
to assist in transmission cooling
•Easy bolt-up installation
•Available in black anodized or polished finish
•Include stainless steel hardware and Heim joints
•Made in the U.S.A.
LUGGAGE
SEATS &
SISSY BARS
1111-0003
1111-0008
PART #
DESCRIPTION
FOR 93-08 FLT, FLHT, FLHR, FLTR, FLHX MODELS
1111-0001
Black anodized
1111-0003
Polished
FOR 93-08 FLT, FLHT, FLHR, FLTR, FLHX MODELS WITH BAKER
PLUS ONE OIL PAN OR CUSTOM CYCLE ENGINEERING FINNED OIL PAN
1111-0007
Black anodized
1111-0008
Polished
EXHAUST
FUEL/AIR
SYSTEMS
SUG. RETAIL
$399.95
449.95
ENGINE
347.95
398.95
TRANSMISSION
& DRIVELINE
DXR STABILIZERS
•CNC-machined from
6061 T-6 aluminum
•Improve handling by
triangulating motor and
transmission in the chassis
to eliminate frame wobble at
high speeds and while cornering
•Adjustable intermediate member with integrated
patented Gooden-Tite polyurethane and aluminum
isolator bushings
•Open plate design with ventilating air scoops
to assist in transmission cooling
•Easy bolt-up installation
•Available in black anodized or polished finish
•Include stainless steel hardware and Heim joints
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 06-09 DYNA MODELS
1111-0009
Black anodized
1111-0010
Polished
GASKETS
& SEALS
ELECTRICAL
LIGHTING
1111-0009
HANDLEBARS,
CONTROLS
& MIRRORS
SUG. RETAIL
$399.95
449.95
CABLES
BRAKES
TANKS &
OIL FILTERS
0933-0047
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
TOURING
LINK
•The answer to
the handling
challenges
faced by most
touring models
has arrived
•Helps stabilize
the chassis by
keeping the
motor/swingarm
assembly aligned with chassis without causing
unnecessary vibration to the rider
•Ground clearance will not be affected
•Easy to install
PART #
DESCRIPTION
SUG. RETAIL
1111-0006
93-08 FL models (all)
$199.95
ULTRA RIDE
STABILIZING SYSTEM
•Dramatically frees your bike
from that “loose” feeling and
high-speed wobbles that can
plague the bike at speed
•System connects the powertrain to the frame by adding stabilizing links
•Allows the drivetrain to move freely in a forward motion, but eliminates
side-to-side movement
•Cut pattern on rear mount plate allows unrestricted air to circulate around the oil bag
•Mount brackets manufactured from 6061-T6 billet aluminum, all mounting hardware and
turnbuckles are stainless steel
PART #
FOR 93-08 FLHT/FLTR/FLHR/FLHX
0933-0047
0933-0049
DESCRIPTION
Chrome
Black
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$399.95
399.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
957
SECTION
17
1302-0207
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
1302-0258
Swingarm not included
1302-0208
SWINGARM RETROFIT
•Retrofits the improved swingarm from 02-08
Touring models to a 80-01 Touring models
•No need to alter transmission housing
•Will require the purchase of a 02-08 style OEM
swingarm with bearings, rear caliper, 1” diameter rear axle
(kit PART #1302-0257) and a 1” rear wheel bearings
•Made in the U.S.A.
SWINGARM CONVERSION RETROFIT KITS
PART #
DESCRIPTION
FOR 80-01 FLT/FLHT/FLHS
1302-0257
Retrofit kit
1302-0258
Retrofit kit w/ 1” axle
PART #
DESCRIPTION
FOR 80-01 FLT/FXR MODELS
1302-0207
Swingarm conversion retrofit kit
1302-0208
Swingarm conversion retrofit kit w/ pivot bolt
SUG. RETAIL
$255.95
296.95
•Replaces stock Cleve Bloc style swingarm bushings with spherical bearings
•Dramatically changes handling and tracking of Dresser models
•Spherical bearings greatly reduce the stiction at the swingarm pivot,
which provides a quicker reaction time to harsh road conditions
•Negates any lateral and torsional movement in the swingarm
•Made in the U.S.A.
SUG. RETAIL
$283.95
345.95
ENGINE
TRANSMISSION
& DRIVELINE
0215-0205
0502-0194
DS-540795
GASKETS
& SEALS
1302-0001
0502-0196
SWINGARM BEARINGS,RACES, BUSHINGS
ELECTRICAL
•Bearings, bushings or racesfor various H-D models
•Sold as a set or individually
1302-0084
SWINGARM BEARING KITS
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
$41.95
PART #
DS-540795
DS-540796
DS-540797
0215-0205
0502-0194
44.95
0502-0196
•Individual bearing kits that include required bearings, seals,
spacers and lock tabs
PART #
DESCRIPTION
1302-0091 For 00-09 Softail models; repl.
OEM #s 9270A, 11282
1302-0084 For 84-99 Softail models; repl.
OEM #s 9076, 11158
1302-0001 For 58-85 Big Twin models (except
Softail, FXR/FLT)
SUG. RETAIL
25.95
DESCRIPTION
Bearing w/ race for 58-84 FX, FL (set); repl. OEM #s 9033 and 9052
Bearing only for 58-84 FX, FL (ea.)
Race only for 58-86 FX, FL (ea.)
Bearing w/ race for 58-84 FX, FL (set); repl. OEM #s 9033 and 9052
Right bearing and race for 82-99 XL; also fits left swingarm bearing
and race for 91-05 Dyna Glide; repl. OEM #47082-81 (set)
Bearing and race for L74-81 XL, 77-78 XLCR; repl. OEM #
47521-74 (ea.); will also fit earlier models that have been updated
w/ bearing kit #47550-74
SUG.
RETAIL
$12.95
7.95
5.95
10.95
7.95
12.95
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
SOFTAIL FLUSH-MOUNT
SWING-ARM PIVOT SHAFT
•Eliminates the nut-bolt and cotter key look
with a flush-mount swing-arm bolt
•Includes shaft with peaked, polished stainless steel end caps
PART #
1302-0166
DESCRIPTION
For 00-07 FXST/FLST; repl. OEM #47610-00
SUG. RETAIL
$112.95
SOFTAIL PIVOT SHAFT KIT
•Kit includes pivot shaft, two bushings,
two chrome spacers, chrome nut and washer
PART #
0309-2250
1302-0259
DESCRIPTION
For 00-07 FXST/FLST; repl. OEM #s 47610-00,
48048-00 and 48049-00
SUG. RETAIL
$46.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
958
SWINGARM PIVOT SHAFTS
1302-0251
•Each part has a 12-point head on both
ends for a symmetrical look and performance
•Special 12-point nuts without a flange have been CNC-machined for each
application; CNC-machined and hand-polished flange washers replace the
factory-stamped washers for a precision look
•Nut end is mirror-polished
•Made from 630 stainless steel with a tensile strength of 170,000 psi
(15% stronger than GR8)
SWINGARM LOCK TABS
PART #
1302-0260
1302-0259
1302-0251
DESCRIPTION
08-09 FXST/FLST
00-07 FXST/FLST
SUG. RETAIL
$149.95
149.95
•Sold in 10-pk.
PART #
1302-0250
DESCRIPTION
For swingarm pivot bolt on 58-84 Big Twin;
repl. OEM #47513-58
For swingarm bearing nut on 52-81 XL;
repl. OEM #47525-52
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$1.55 (ea.)
2.55 (ea.)
SECTION
SWINGARM PIVOT
BOLT SET
SOFTAIL SWINGARM
AXIS TUBE BOLT KIT
PART #
DS-190901
DESCRIPTION
For 84-99 Softail
WINDSHIELDS
•Socket cap fasteners made
from stainless steel with a
polished finish
•Manufactured from only the
best materials that are certified SDF (Seamless
and Defect Free), heat treated to a minimum of
180,000 psi (20% stronger than GR8) and then the
threads are rolled to a UNJ3A spec
•Kit contains two chrome-plated 3/4”-16 x 3”
grade 8 hex bolts and two chrome washers
•Made in the U.S.A.
SUG. RETAIL
$26.95
PART #
1302-0168
TOURING
DESCRIPTION
For 84-99 Softail models
SUG. RETAIL
$62.95
2406-8768
DS-195021
1303-0076
SWINGARM PIVOT BLOCKS
•Chrome-plated, CNC-machined T-6 billet aluminum
•Available in smooth or ball-milled design
•Include mounting hardware
•Made in the U.S.A.
SUG.
SUG.
PART #
DESCRIPTION RETAIL PART #
DESCRIPTION RETAIL
FOR 93-02 FLT/FLHT
FOR 82-94/99-00 FXR
DS-195020 Smooth
$233.95 1303-0076
Smooth
$102.95
DS-195021 Ball-milled
233.95 2406-8768
Ball-milled
102.95
SOCKET-HEAD
SWINGARM
END CAP
BOLT KITS
EXHAUST
•Chrome finish
•Sold in 4-pk.
DS-190123
PART #
DESCRIPTION
FOR FXR OR FLT; REPL. OEM #S 4729 AND 3782
7/16” -14 x 1 1/4” w/ center cap plugs;
DS-190121
repl. OEM #67830-59
7/16” -20 x 1 1/4”
DS-190123
SUG. RETAIL
•Die-cast, chromed and securely
held in place by a setscrew
•Add a clean look
PART #
1303-0026
1303-0025
ENGINE
TRANSMISSION
& DRIVELINE
•Measure .758” i.d. x
1.125” o.d. and are .375” W
•Sold in 2-pk.
PART #
DS-195400
DESCRIPTION
For 58-84 FX/FL models; repl. OEM #47517-58
SUG. RETAIL
$10.95
GASKETS
& SEALS
1303-0025
DESCRIPTION
For 00-07 Softail models
For 84-99 Softail models
SUG. RETAIL
$15.95
13.95
ELECTRICAL
1303-0045
0504-0016
0504-0014
DS-243134
SWINGARM PIVOT BOLT COVERS
•Made of chrome-plated 6061 T-6 billet aluminum
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 00-07 FXST/FLST (EXCEPT FLSTF, FLSTN, FXSTD)
DS-243134
Elite
0504-0016
Gothic
FOR 84-99 SOFTAIL
0504-0014
Elite
0504-0015
Gothic
HANDLEBARS,
CONTROLS
& MIRRORS
SWINGARM PIVOT
BOLT COVERS
•Quality chrome-plated billet
aluminum construction
•Sold in pairs
0504-0015
SUG. RETAIL
$58.95
71.95
SUG.
PART #
DESCRIPTION
RETAIL
FOR 00-07 FXST/FLST (EXCEPT
FXSTD, FLSTF, FLSTN)
1303-0044 Warrior
$59.95
1303-0045 Smooth
59.95
1303-0046 Milled
59.95
1303-0047 Crusader
Maltese cross
59.95
CABLES
1303-0047
PART #
DESCRIPTION
FOR 04-09 XL
1303-0094 Warrior
1303-0091 Nasty
1303-0093 Milled
1303-0092 Crusader
Maltese cross
DESCRIPTION
Repl. OEM #s 67865-89 and 67830-59
•Chrome-plated domed covers
with a smooth finish
•Easy installation with setscrews
•Sold in pairs
•Made in the U.S.A.
SUG. RETAIL
$4.95
PART #
DESCRIPTION
2401-0120 00-07 FXST/FLST (except
FLSTF/FXSTD/FLSTN)
56.95
BRAKES
TANKS &
OIL FILTERS
SUG.
RETAIL
$26.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SWINGARM
PIVOT COVERS
•Chrome covers hide the pivot shaft and nut
•Provide a great finishing touch
•Install quickly
andeasily with
PART #
DESCRIPTION
provided hardware
0214-0046
For 04-09 XL
•Sold in pairs
$56.95
56.95
56.95
FRAMES,
SUSPENSION
& FENDERS
SWINGARM PIVOT COVERS
•Chrome-plated cap plugs the headlight
mounting hole on 59-06 XL and 71-06 FX headlight visors
•Also for dressing up 82-94 FXR swingarm pivots
•Made in the U.S.A.; sold each
SUG.
RETAIL
DASHES
& GAUGES
58.95
71.95
HEADLIGHT
VISOR HOLE
PLUG/
SWINGARM
PIVOT CAP
LIGHTING
1303-0046
1303-0044
PART #
DS-190982
FUEL/AIR
SYSTEMS
$12.95
10.95
SWINGARM
SPACERS
SWINGARM PIVOT
BOLT COVERS
LUGGAGE
SEATS &
SISSY BARS
DS-190121
DS-195020
17
SUG. RETAIL
$49.95
All part numbers in BOLD MAGENTA are new for 2009.
COVERS,
SECURITY
& GENERAL
959
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
EZ-UP
CENTER STANDS
•Raise bike onto
center stand while
rider is still on bike
•Simple to get off stand,
too; just place bike in gear and drive away
•Load carried entirely on bottom of frame rails
•Maintenance free with I-Glide self-lubricating bushing at pivot locations
•Mounts to frame with two bolts in less than five minutes with a 3/4” wrench
•Zinc-plated axle and stainless steel springs
0510-0086
•Available with chrome access arm
•All hardware and illustrated instructions included
•No frame or bike modification required
0510-0087
•Standard center stand fits the standard height suspensions on 89-08 H-D touring bikes that have
the bowtie brace welded between frame rails directly below transmission
•-3/4” center stand fits H-D touring bikes that are lowered in the rear only; for factory-lowered models
including the FLHX and FLHRS or any bike that has been lowered with the H-D Profile rear suspension lowering kits
•-1” center stand fits H-D touring motorcycles that have been lowered in the front and rear; for factory-lowered models including the FLHX and FLHRS
and any touring model that has been lowered with the H-D Profile front and rear suspension lowering kits
PART #
0510-0086
DESCRIPTION
Standard center stand
SUG. RETAIL
$289.95
PART #
0510-0087
DESCRIPTION
-3/4” center stand
SUG. RETAIL
$289.95
PART #
0510-0088
DESCRIPTION
-1” center stand
SUG. RETAIL
$289.95
FUEL/AIR
SYSTEMS
ENGINE
0510-0066
NON-ADJUSTABLE
SPRING-LESS KICKSTANDS
TRANSMISSION
& DRIVELINE
•Spring-loaded kickstands now
available in either Radius or
Rad II styles
•Chrome plated
0510-0072
0510-0068
•Features hidden ball bearing with
return spring for positive feel and lock
•Stainless steel mounting brackets ensure a long-lasting look
WELD-ON KICKSTAND
GASKETS
& SEALS
ELECTRICAL
LIGHTING
•Machined from 6061 polished aluminum with
West Coast Choppers logo
•Features an internal spring and can be located
out of sight for a clean, custom look
•111/2” in length
•Requires modification to frame; 1018 steel
mounting tab needs welding to frame
•Fits 11/8” frame tubing
•Made in the U.S.A.
PART #
0510-0092
DESCRIPTION
Weld-on kickstand
SUG. RETAIL
$299.95
PART #
FOR 00-06 FXST
0510-0068
0510-0072
FOR 84-99 FXST
0510-0066
0510-0067
DESCRIPTION
SUG. RETAIL
Radius, rear
Rad II, rear
Radius, front
Radius, rear
$192.95
239.95
192.95
192.95
PART #
FOR 84-99 FXST
0510-0070
0510-0071
FOR FXR
0510-0069
0510-0073
0510-0070
DESCRIPTION
(CONT)
Rad II, front
Rad II, rear
SUG. RETAIL
$239.95
239.95
Radius, rear
Rad II, rear
192.95
239.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
1” LOWERED
KICKSTANDS
BOLT-ON
SPRINGLESS KICKSTAND
•Chrome-plated forged steel
•1” shorter than stock kickstand
•Mounts to stock mount
and accepts stock spring
•Clean, no-spring look in a
bolt-on version
•Completely smooth, chrome-plated design
PART #
0502-0078
DESCRIPTION
For 36-99 Big Twin
0510-0085
SUG. RETAIL
$174.95
PART #
0510-0085
DS-240019
DESCRIPTION
For 07-09 FXST and FLST models
For 89-06 FXST and FLST models
SUG. RETAIL
$82.95
82.95
DS-240019
DS-233677
DASHES
& GAUGES
1902-0039
0510-0038
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
1902-0036
1902-0037
1902-0038
& LICENSE
PLATE FRAMES CHROME TELESCOPIC KICKSTAND
•Telescopic design allows adjustment of 1”
TIRES,
•Mounting brackets are machined from stainless steel to
TUBES &
eliminate chrome wear in contact area
•Hidden ball-bearing design return spring for positive
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
960
CHROME KICKSTAND KITS
•Complete kit includes a one-piece polished
chrome mount with spring tab, kickstand,
leg stop, spring and nut
•Mounting repair kit available; includes mount, spring, leg stop and nut
•Mounting bracket only may be purchased separately
feel and clean look
•Works great for bikes that have been lowered
PART #
1902-0036
1902-0037
1902-0038
1902-0039
DESCRIPTION
Front mount, 84-99 FXST models, 4-speed FX models
Rear mount, 84-99 FXST (drilling required)
Rear mount, 00-09 FXST models
Rear mount, all FXR models
SUG.
RETAIL
$200.95
200.95
200.95
200.95
SUG.
PART #
DESCRIPTION
RETAIL
DS-233677 Complete kickstand kit for 36-86 FXST, FX and FL models $65.95
0510-0038 Complete kickstand kit for 89-99 Softail models
(standard length)
62.95
0510-0039 Complete kickstand kit for 89-99 Softail models
(1” under stock length)
62.95
DS-233675 Kickstand mounting repair kit for DS-233677
22.95
DS-233676 Repl. mounting bracket only; repl. OEM #50041-80A
16.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
DS-240054
DS-240055
DS-240044
DS-240045
17
WINDSHIELDS
TOURING
DS-240043
LUGGAGE
0510-0065
SEATS &
SISSY BARS
0510-0078
0510-0079
EXHAUST
CHROME KICKSTANDS
PART #
DESCRIPTION
FOR 89-06 FXST, FLST AND 83-06 FLT
DS-2400551 Stock length for 89-06 FXST and FLST models;
repl. OEM #50087-89A (11” L)
DS-2400541 Stock length for 83-06 FLT models;
repl. OEM #50075-83/50075-91A (11” L)
FOR 36-86 BIG TWIN AND 84-88 FXST, FLST
DS-2400441 Stock length; repl. OEM #50061-36E (101/2” L)
0510-00611 Stock length, round (101/2” L)
0510-0062
1” over stock length
DS-2400502 1” over stock length, OEM style
DS-2400452 1” under stock length, custom round
FOR 82-94 FXR MODELS
DS-2400433 Stock length for 82-90 FXR, FXRS and FXLR;
repl. OEM #50031-84A (123/4” L)
FOR 85-09 XL MODELS
0510-0078
For 04-09 models, stock length
0510-0079
For 04-09 models, 1” shorter than stock length
DS-2400011 For 85-88 models that have been lowered 2” (7” L)
SUG.
RETAIL
$46.95
46.95
42.95
58.95
58.95
47.95
81.95
PART #
DESCRIPTION
FOR 85-09 XL MODELS (CONT)
DS-240003
Fits 92-03 Hugger and 97-99 1200 Custom;
replaces OEM #50072-92 (81/4” L)
FOR 52-E84 XL AND K MODELS
0510-0064
Stock length (91/2” L)
DS-2400494 Flat bottom, stock length (91/2” L)
0510-0065
1” over stock length
0510-0063
1” under stock length
1
2
36.95
3
49.95
49.95
52.95
4
SUG.
RETAIL
FUEL/AIR
SYSTEMS
$52.95
58.95
49.95
58.95
58.95
Big Twin, Softail, FLT and XL kickstands are measured from the first bend
at the top to the first bend at the bottom of the kickstand.
Kickstands that are shorter than stock length are for bikes that have
been lowered. Kickstands that are longer than stock length are for bikes
with 4-6” longer fork tubes with no change in rake.
FXR kickstands are measured from the center of the mounting hole to
the first bend at the bottom of the kickstand.
XL kickstands are measured from the center of the mounting hole to the
bend at the bottom of the kickstand.
DS-240201
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
DS-240330
DS-233678
DS-240205
HANDLEBARS,
CONTROLS
& MIRRORS
DS-233679
DS-240004
CABLES
DS-240210
CHROME KICKSTAND SPRINGS
CHROMED
KICKSTAND COMPONENTS
•For various Big Twin models
PART #
DESCRIPTION
DS-240004 Kickstand mounting support for 85-99 FXST,
FLST models (repl. OEM #50018-85)
DS-240201 Kickstand mounting support for 36-85 FX, FXST,
FXWG, FL (except FXR, FXRS); repl. OEM #50014-74
DS-240210 Kickstand leg stop for 36-87 FX, FXST, FXWG,
FL; repl. OEM #50028-74
DS-240205 Kickstand spring plate for 36-90 FX, FXST,
FXWG, FL; repl. OEM #s 50036-36, 50028-74A
SUG. RETAIL
$16.95
16.95
7.95
BRAKES
•Available for a wide selection of
Big Twin and XL models
•Springs are measured from
hook to hook; sold each
PART #
DS-240330
DS-233678
DS-233679
DESCRIPTION
For 71-84 FX, FXWG, FL, FLH; 80-90 FLT,
FLHT; 82-90 FXR, FXRS, FXRT; 57-E84 XL
models; repl. OEM #50011-30 (3.4”)
For 91-06 FXST/FLST, 85-98 FLT, 91-09 XL
and 95-06 Buell; repl. OEM #50005-85A (3.7”)
84-90 XL; repl. OEM #41836-84 (3.9”)
SUG. RETAIL
$3.95
4.95
4.95
FOOTRESTS
& LICENSE
PLATE FRAMES
KICKSTAND WEDGE KIT
•This kit, designed by Don Hotop,
allows you to change the angle of your
kickstand at the frame, rather than
heating and bending your chrome
kickstand to work for lowered bikes
•Maintains the original angle
of the foot board
•6061 billet aluminum construction
•Includes both fine- and coarse-thread
bolts for early and late models and
installation instructions
•CNC-machined from billet steel
•Can be welded to any 11/8”
diameter tubing
•Accepts 52-E84 XL-style kickstands
•Made in the U.S.A.
PART #
DS-111000
DESCRIPTION
Universal kickstand mount
SUG. RETAIL
$61.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
8.95
UNIVERSAL
KICKSTAND MOUNT
TANKS &
OIL FILTERS
PART #
0510-0028
DESCRIPTION
For 81-06 FLT, FLHT, FLHS and
FLHR MODELS LOWERED UP TO 2”
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$43.95
COVERS,
SECURITY
& GENERAL
961
SECTION
17
WINDSHIELDS
KICKSTAND WEDGE
•Aluminum wedge changes the
angle of the kickstand so it does
not have to be bent
•For lowered models only
•Sold each
•Made in the U.S.A.
TOURING
6° ANGLE KICKSTAND WEDGE
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
•Plate enables a 6° lean angle adjustment (up or down)
on side stands with mounting holes 17/16” apart
•CNC-machined from billet with a polished, chromed finish
•Made in the U.S.A.
PART #
0510-0040
DESCRIPTION
Kickstand wedge
PART #
DS-240202
KICKSTAND
ANGLE
PLATE
•For use on
lowered bikes
•Allows you to adjust
the angle of your
kickstand quickly
PART #
and easily
0510-0090
•Sold each
EASY FIND
KICKSTAND EXTENSION
DESCRIPTION
For 36-99 Big Twin (except FL)
SUG.
RETAIL
$23.95
•Chrome extension makes hard-toreach kickstands easier to operate
•Comes with hardware
NOTE: Drilling required.
NOTE: Kickstand sold separately.
PART #
DS-240015
DESCRIPTION
SUG. RETAIL
For 84-08 FLT/FLHT/FLHR/FLTR and 86-06 Softail
models (except 05-06 FLSTN); repl. OEM #50055-90
$19.95
PART #
DS-240212
DESCRIPTION
For all 89-99 Softail models w/ stock kickstand
bracket OEM #50018-85 and 58-84 FL and
FX models (except FXWG) w/ stock kickstand
bracket OEM #50014-74
KICKSTAND EXTENSION
BRAKES
•Made of highly polished stainless steel
•Attaches to the stock kickstand and is adjustable to
extend outward from 13/4” to 23/4”
•Works great with stock covers for easier
accessibility of stock kickstands and necessary when using oversized
primary covers such as the Barnett billet aluminum cover
•Installation is easy without drilling holes
•Made in the U.S.A.
KICKSTAND BUMPER
PART #
0710-0039
PART #
DS-240008
DASHES
& GAUGES
DESCRIPTION
For 86-06 FLH/FLT/FLHT models
and 82-94 FXR models
SUG. RETAIL
SUG. RETAIL
$12.95
•Rubber bumpers
•Sold each to consumer;
sold to dealer in 5-pack
$38.95
DESCRIPTION
For 89-06 FXST, 95-04 FXDS- Convertible,
FXDX, FXDXT 86-00 XL; repl. OEM #62123-66
SUG. RETAIL
$1.95 (ea.)
KICKSTAND BOOT
•Distributes your bike’s weight and
prevents sinking into hot
PART #
asphalt, dirt or grass
0510-0034
•Sold in pack of 12
DESCRIPTION
Kickstand boot
SUG. RETAIL
$7.95
TIRES,
TUBES &
WHEELS
DS-375642
DS-375641
FRAME-MOUNT
KICKSTAND BUMPERS
HARDWARE,
CHEMICALS
& TOOLS
KICKSTAND BUMPER
COVERS,
SECURITY
& GENERAL
PART #
DS-173388
DS-375631
962
$29.95
29.95
•Adjustable kickstand stop protects the
primary case from the kickstand
•Eliminates the need for
the glue-on rubber pad
•Nylon tip screw with jam nut provides
adjustment for proper kickstand position
•Made from 5/16” thick high-strength steel
CABLES
FOOTRESTS
& LICENSE
PLATE FRAMES
SUG. RETAIL
ADJUSTABLE KICKSTAND STOP
HANDLEBARS,
CONTROLS
& MIRRORS
FRAMES,
SUSPENSION
& FENDERS
DS-240021
•Chrome extension for easy reach
•Comes with rubber bumper,
mounting hardware
and instructions
LIGHTING
TANKS &
OIL FILTERS
DS-240022
PART #
DESCRIPTION
REPLACES OEM #S 50212-98 AND 50233-00
DS-240021
For 86-06 FXST, FLST (except 05-06 FLSTN),
84-06 FLT, FLHR and FLTR models
DS-240022
For 93-05 FXD models
NOTE: Must drill 1/4” hole in kickstand.
ELECTRICAL
SUG. RETAIL
$22.95
SUG. RETAIL
$14.95
TRANSMISSION
& DRIVELINE KICKSTAND EXTENSION
GASKETS
& SEALS
DESCRIPTION
For 36-99 Big Twin models
•Easy attachment with doublebacked adhesive (included)
•Rubber kickstand bumpers clip to the
round frame tubes under the primary cover
•Great for custom applications
•Sold each
PART #
DS-375641
DS-375631
DESCRIPTION
Genuine James kickstand bumpers (10-pk.)
Kickstand bumpers (6-pk.)
SUG. RETAIL
$1.95 (ea.)
1.25 (ea.)
DS-375642
DESCRIPTION
11/8” bumper for 91-01 Dyna Glide
(except FXDS-CON); repl. OEM #50054-90
1” bumper for 85-00 FLT/FLHT models;
repl. OEM #50059-85
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$4.95
4.95
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
CRUZ COVERS
•Molded polyurethane
covers replace OEM parts
•Left side features molded
bottle-holder that accepts 20 oz.
torpedo-style bottles and
most 16 oz. bottles; right side
covers the starter and wiring
•Built-in air deflectors keep engine heat off of the rider’s legs
•Ready for paint with minimal prep work
•Install easily without tools
PART #
0504-0094
DESCRIPTION
For 95-07 FLT models
0504-0023
0504-0024
SEATS &
SISSY BARS
EXHAUST
SUG. RETAIL
$199.95
FUEL/AIR
SYSTEMS
CUSTOM FRAME
SIDE PANELS
CHROME SIDE COVERS
•Impressively chromed steel side
covers are designed to
replace the stock black covers
•Sold in pairs
PART #
DS-373675
DESCRIPTION
For 82-94/99-00 FXR models
SUG. RETAIL
$76.95
•Panels add a “full-bodied” look
to the sides of the bike
•Replace OEM side covers and fill-in
around the front of the saddlebags
•Provide a great area to continue the paint scheme
•Panels are available with a cut-out to fit with the OEM
passenger floorboards and mounts or smooth for use
with no passenger floorboards or pegs
•Made from paintable formed ABS plastic; easy to trim or form if needed
•Must be used in conjunction with Carlini floater bars PART #DS-209951 or
the H-D OEM saddlebag support kit #46565-04 (purchased separately)
•Requires drilling and tapping the frame
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 97-08 FLT, FLHT, FLTR AND FLHR MODELS
0504-0023 Panels for OEM passenger floorboards (pr.)
0504-0024 Panels for use w/out passenger
floorboards or pegs (pr.)
SUG. RETAIL
160.95
PART #
DS-373676
PART #
0504-0111
DESCRIPTION
For 97-07 FLHT, FLHR, FLTR
SUG. RETAIL
$99.95
0520-0405
SIDE COVERS
•Stamped-steel construction
•Polished and chrome-plated
•Replace stock painted covers in minutes; no drilling required
•Sold each
PART #
FOR 04-09 XL MODELS
0520-0404
0520-0405
DESCRIPTION
Right side
Left side
SUG. RETAIL
$87.95
87.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
FRONT
FRAME COVER
0520-0404
LIGHTING
BRAKES
•Show-chromed cover fills the “black hole” behind
the rear cylinder and the starter motor
•Also hides the gap between the y-frame member
•No drilling or modifications required for cruise-control equipped models
SUG. RETAIL
$78.95
ELECTRICAL
CABLES
BEHIND THE ENGINE FILLER
PANEL FRAME COVER
DESCRIPTION
For 82-94/99-00 FXR models
GASKETS
& SEALS
HANDLEBARS,
CONTROLS
& MIRRORS
•This easy-to-install chrome accent panel
dresses up the area under the seat and above
the transmission
•Covers the rough OEM frame bracing and extends over the edges
of the frame tubes for a clean, finished look
•Comes complete with mounting hardware
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-720135
For 97-07 FLT/FLHT
(except models w/ cruise control)
$76.95
•ABS plastic comes ready to
sand and paint
•Completely cover the triangle
portion of the frame
•Sold in pairs
•Made in the U.S.A.
TRANSMISSION
& DRIVELINE
$160.95
ACCENT PANEL
CUSTOM SIDE COVERS
ENGINE
•Fits around and
covers front frame
tubes and
lower mounts
•Cleans up front
area of the frame
•Made of formed ABS
paintable plastic
•Supplied with instructions
and hardware
•Requires drilling and tapping the frame
•Made in the U.S.A.
PART #
0504-0022
DESCRIPTION
For 97-07 FLT, FLHT, FLHR and FLTR models
All part numbers in BOLD MAGENTA are new for 2009.
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$72.95
COVERS,
SECURITY
& GENERAL
963
SECTION
17
DS-373759
FRAME COVER SETS
DS-373760
•Cover up those unsightly stock welds without
the hassle and expense of molding and painting
•Made of perfectly formed ABS plastic and come
ready to paint
•Covers are designed to mount to neck area
and rear side panels
•Made in the U.S.A.
PART #
DESCRIPTION
DS-373759
Neck cover set for 93-07 FLT, FLHT and FLHR
DS-373760
Rear side panel cover set for
93-96 FLT, FLHT and FLHR
WINDSHIELDS
TOURING
LUGGAGE
SUG. RETAIL
$78.95
143.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
SWINGARM COVERS/
PHANTOM COVERS KIT
•Easy-to-install chrome covers offer an
alternative to downtime and plating
•Lighted and unlighted versions available
•Both kits include four covers for tube section of
swingarm, two upper swingarm covers,
two Phantom covers and all necessary hardware
•Lighted covers have single-function LEDs
that can be wired as auxiliary lights,
turn signals or brake lights
0504-0002
NOTE: LEDs are not DOT approved.
NOTE: Kit will fit FLSTF, FXSTD or FLSTN models only if stock over-under shotgun exhaust has
been replaced with a staggered dual or 2-into-1 system.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
KITS WITH LED PHANTOM COVERS
KITS WITHOUT LED PHANTOM COVERS
1303-0087
For 08-09 FXST/FLST (except FLSTF, FLSTN)
$199.95 1303-0086
For 08-09 FXST/FLST (except FLSTF, FLSTN)
0504-0002
For 00-07 FXTSD models
199.95 1303-0038
For 00-05 FXST, 00-07 FLST
(except 07 FLSTF, FXSTD and FLSTN)
0504-0018
For 00-05 FXST, 00-07 FLST (except 07 FLSTF,
FXSTD and FLSTN)
199.95 1303-0077
For 86-99 FXST
1303-0031
For 86-99 Softail
199.95
SUG. RETAIL
$159.95
159.95
159.95
1303-0032
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
1303-0033
SWINGARM COVER SET
•Intended for riders who already have Küryakyn’s
Phantom Covers or other axle cover kit
•Set includes a pair of sleek upper swingarm covers and four
easy-to-install covers for the tubular sections of the swingarm
CHROME SWINGARM COVERS
NOTE: In some applications there may be a small gap between the
tubular swingarm covers and the axle cover.
PART #
1303-0032
1303-0033
DESCRIPTION
For 00-05 FXST, 00-07 FLST
(except FLSTF, FXSTD, FLSTN)
For 86-99 Softail
SUG. RETAIL
$129.95
129.95
•Two-piece design for simple, quick installation
•Covers all visible parts of the swingarm, even the axles
•Sold as a set
PART #
1303-0088
DESCRIPTION
For 06-09 FXD/FXDWG
SUG. RETAIL
$199.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
964
LOWER FRONT
FRAME COVER
RIGHT REAR LOWER FRAME COVER
•Stamped chrome lower frame cover bridges the gap between the OEM side cover and the
passenger floorboard
•Covers up the exposed frame tubes and rubber isolation mount
•Sold each
PART #
0504-0119
DESCRIPTION
For 07-08 FLHT/FLHR/FLTR
•Shrouds the kickstand assembly,
front engine stabilizer and footboard
mount with beautiful chrome
PART #
0504-0113
SUG. RETAIL
$69.95
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
For 91-08 FLT, FLHT,
FLHR, FLHX and FLTR
w/o fairing lowers
SUG.
RETAIL
$69.95
SECTION
17
WINDSHIELDS
0504-0029
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
0504-0003
DELUXE NECK COVER KIT
•Add brilliance to a dull area with these smooth,
quickly installed covers that shroud the neck
and extend down the frame
•Cover is enlarged enough on the right side to
accommodate the in-line cruise control pull-off
switch found on all Road King 02-05 models
•Deluxe kit also includes two snap-on down
tube pieces that add coverage almost all the
way down to the floorboard mounts
•Easy to install
PART #
0504-0077
DESCRIPTION
For 95-05 FLT, FLHT,
FLTR, FLHR models
SUG. RETAIL
$169.95
FUEL/AIR
SYSTEMS
NECK COVERS
•Chrome-plated, die-cast construction
•Covers the ugly stock welds on frame
•Two-piece construction for easy installation
•Wiring modifications required on models using the
plug-in-style ignition modules that mount on the frame neck
PART #
0504-0003
0504-0109
0504-0029
0504-0108
0504-0158
DESCRIPTION
For 00-06 FXST (except FXSTD)
For 00-07 FXSTD
For 00-06 FLSTC, FLSTF and 05-06 FLSTN
For 86-99 FLSTC, FLSTF, FLSTN (does not fit FLSTS)
For 06-09 Dyna (except FXDWG)
DOWN TUBE COVERS
0504-0159
ENGINE
0504-0158
SUG. RETAIL
$89.95
89.95
79.95
79.95
139.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
0504-0078
•The easy way to add a touch of chrome to the front frame
down tubes
•Simple snap-on installation
•Sold as a set
PART #
DESCRIPTION
SUG. RETAIL
0504-0159
For 92-99 FXST/FLST
$59.95
0504-0078
For 00-06 FXST/FLST
59.95
0504-0112
For 07-09 FXST/FLST
59.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
0502-0074
CABLES
0502-0075
BRAKES
TANKS &
OIL FILTERS
MID-FRAME COVERS
MID-FRAME COVERS
•Quick, easy way to conceal top frame tubes on Softails
•Steel construction with chrome-plated, creamy smooth finish
•Tuck in behind fender struts and slip up under the fuel tank
•Sold in pairs
PART #
0502-0074
0502-0075
DESCRIPTION
For 00-07 FXST/FLST (except FXSTD)
For 00-07 FXSTD
SUG. RETAIL
$89.95
89.95
DASHES
& GAUGES
•Chrome-plated steel cover creates a beautiful highlight
•Conceals frame welds for a smooth, seamless look
•Installs in just minutes
•Sold in pairs
PART #
0504-0030
DESCRIPTION
For 97-07 FLHT, FLTR and FLHR models
SUG. RETAIL
$99.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
LOWER FRAME COVER
•Eye-catching and easy to install
•Fits below Kuryakyn’s Boomerang frame cover on the left side
of the bike
•Not for use with models that have cross-over exhaust
•Sold each
PART #
DESCRIPTION
SUG. RETAIL
0504-0079
For 95-07 Softail models
$39.95
All part numbers in BOLD MAGENTA are new for 2009.
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
965
SECTION
17
WINDSHIELDS
DS-280303
TOURING
LUGGAGE
SEATS &
SISSY BARS
DS-280304
EXHAUST
FENDER-TO-SADDLEBAG
FILLER PANELS WITH LEDS
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
FLT FILLER PANELS
•Fit all FLT Baggers with hard bags
•Fiberglass construction with gray gel coat finish
•Will not work with detachable accessories
•Made in the U.S.A.
NOTE: Custom installation and some modifications are necessary.
PART #
DESCRIPTION
FOR 95-08 FLT, FLHT, FLTR, FLHR (EXCEPT FLHX)
0504-0028
Filler panels
SUG. RETAIL
$249.95
•Panels feature dual-function LEDs
•Available with chrome or raw finish
•Mount to OEM fender brace
•LEDs are not DOT approved; recommended
for off-road or show use only
•Use of LEDs as marker lights requires a
load equalizer (PART #DS-272236 or BLLE02)
•Will not work with most bag guards
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 93-08 FLT, FLHT, FLTR AND FLHR
(EXCEPT FLHX, FLHRCI, FLHRS/SI)
DS-280303
Chrome filler panels (pr.)
DS-280304
Raw filler panels (pr.)
SUG. RETAIL
$327.95
308.95
ELECTRICAL
FENDER-TO-SADDLEBAG COVERS
•These covers fill the empty space between the
rear fender and OEM saddlebags; without saddlebag guards
•Mount to OEM rear fender braces
•Provides additional surfaces to mount marker lights or turn signals
•Available in a chrome or raw finish
•Made in the U.S.A.
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
NOTE: Not for use with detachable hardware.
PART #
DESCRIPTION
SUG. RETAIL
FOR 93-08 FLT, FLHT, FLTR AND FLHR MODELS
(EXCEPT FLHX, FLHRCI, FLHRS, SI) WITHOUT SADDLEBAG GUARDS
DS-720121
Chrome covers
$139.95
DS-720129
Raw covers
59.95
DS-720121
DS-720129
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
REAR TOP FRAME
RAIL COVERS
•A dressy way to replace the OEM covers when removing the passenger grab rail
•Can be used separately or with Drag-Hotop fender-to-saddlebag space covers
PART #s DS-720121 and DS-720129 for ultimate style
•Come with all necessary mounting hardware and complete installation instructions
•Require removal of rear frame assembly that mounts license plate;
a custom license bracket must be used
•Chrome finish
PART #
DESCRIPTION
SUG. RETAIL
•Sold in pairs
For 97-08 FLT, FLHT, FLTR and FLHR
$164.95
•Made in the U.S.A. DS-720122
CURVACEOUS UPPER FILLERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
0504-0080
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
966
0504-0081
•Accent the line of your fender
and hide clutter for a custom look
•Steel construction with E-coating,
ready to color match paint
•Upper fillers mate up to the stock fender/lower filler
on Street Glides; can also be used on FLT, FLHT, FLHR and FLTR
models when used in conjunction with Klock Werks lower
filler panels
•Requires removal of stock license plate mount bar
•Two versions – smooth for models with or without detachable
backrests; slotted for models with detachable tour packs
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 06-08 FLHX
0504-0080
Smooth fillers for use w/
$169.95
or w/o detachable backrest
0504-0081
Slotted fillers for use
w/ detachable tour rack pack
169.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
0504-0121
17
0504-0133
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
0504-0090
EXHAUST
FUEL/AIR
SYSTEMS
0504-0139
0504-0156
0504-0145
ENGINE
0504-0139
0504-0150
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
Rolled
Bottom
LOWER FILLERS
Contour
Cut
Straight
Bottom
ELECTRICAL
•Fill the void between the lower fender and saddlebags; a minor detail that makes a major impact
•The only steel filler designed to be used with or without detachables
•Detachable style is for use with OEM detachable accessories; available separately
•Constructed from 16-gauge steel and E-coated for rust and corrosion resistance
•Use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area
•LED auxiliary light holes are laser cut for precision fit; oval hole dimensions are 1.875” L x 1” W and round hole diameter is 1.625”; lights sold separately,
see LIGHTING section
•Available in standard for stock bags, Extended and Extended Plus for use with Klock Werks Benchmark rear fenders and OEM or
Klock Werks saddlebags extensions
•Rolled bottom fillers match the look of the bags and serves to line up the fullback bag extensions and Klock Werks stretched fender
•Sold in pairs and include all necessary hardware and instructions to install them
•Made in the U.S.A.
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
CLASSIC ROLLED BOTTOM FOR 99-08 FLHRC WITH OEM LEATHER SADDLEBAGS
PART #
0504-0120
0504-0121
0504-0122
0504-0123
DESCRIPTION
Smooth
Smooth w/ round LED cutout
Smooth w/ horizontal cateye LED cutout
Smooth w/ vertical cateye LED cutout
SUG. RETAIL
$129.95
129.95
129.95
129.95
PART #
0504-0124
0504-0125
0504-0126
0504-0127
DESCRIPTION
Detachable
Detachable w/ round LED cutout
Detachable w/ horizontal cateye LED cutout
Detachable w/ vertical cateye LED cutout
SUG. RETAIL
$129.95
129.95
129.95
129.95
FOR 93-08 FLT, FLHT, FLHR, FLTR MODELS
PART #
DESCRIPTION
SUG. RETAIL
STANDARD LENGTH STRAIGHT BOTTOM FOR USE WITH STOCK LENGTH
FENDER AND OEM SADDLEBAGS
0504-0090
Smooth
$99.95
0504-0128
Smooth w/ round LED cutout
129.95
0504-0129
Smooth w/ horizontal cateye LED cutout
129.95
0504-0130
Smooth w/ vertical cateye LED cutout
129.95
0504-0091
Detachable
99.95
0504-0131
Detachable w/ round LED cutout
129.95
0504-0132
Detachable w/ horizontal cateye LED cutout
129.95
0504-0133
Detachable w/ vertical cateye LED cutout
129.95
EXTENDED LENGTH STRAIGHT BOTTOM FOR USE WITH 2” KLOCK WERKS
STRETCHED REAR FENDER AND OEM SADDLEBAGS
0504-0092
Smooth
99.95
0504-0093
Detachable
99.95
EXTENDED CONTOUR CUT FOR USE WITH 2” KLOCK WERKS STRETCHED
REAR FENDER AND OEM SADDLEBAGS
0504-0142
Smooth
129.95
0504-0143
Smooth w/ round LED cutout
129.95
0504-0144
Smooth w/ horizontal cateye LED cutout
129.95
0504-0145
Smooth w/ vertical cateye LED cutout
129.95
0504-0146
Detachable
129.95
0504-0147
Detachable w/ round LED cutout
129.95
0504-0148
Detachable w/ horizontal cateye LED cutout
129.95
0504-0149
Detachable w/ vertical cateye LED cutout
129.95
PART #
DESCRIPTION
SUG. RETAIL
EXTENDED PLUS CONTOUR CUT FOR USE WITH 6” KLOCK WERKS
STRETCHED REAR FENDER AND KLOCK WERKS SADDLEBAG EXTENSIONS
0504-0150
Smooth
$129.95
0504-0151
Smooth w/ round LED cutout
129.95
0504-0152
Smooth w/ horizontal cateye LED cutout
129.95
0504-0153
Smooth w/ vertical cateye LED cutout
129.95
0504-0154
Detachable
129.95
0504-0155
Detachable w/ round LED cutout
129.95
0504-0156
Detachable w/ horizontal cateye LED cutout
129.95
0504-0157
Detachable w/ vertical cateye LED cutout
129.95
EXTENDED ROLLED BOTTOM FOR USE WITH KLOCK WERKS STRETCHED
REAR FENDER, KLOCK WERKS FULLBACK SADDLEBAG EXTENSIONS AND
HIDDEN EXHAUST
0504-0134
Smooth
129.95
0504-0135
Smooth w/ round LED cutout
129.95
0504-0136
Smooth w/ horizontal cateye LED cutout
129.95
0504-0137
Smooth w/ vertical cateye LED cutout
129.95
0504-0138
Detachable
129.95
0504-0139
Detachable w/ round LED cutout
129.95
0504-0140
Detachable w/ horizontal cateye LED cutout
129.95
0504-0141
Detachable w/ vertical cateye LED cutout
129.95
All part numbers in BOLD MAGENTA are new for 2009.
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
967
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
DS-720227
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
BAGGER REAR FENDER
COVER/SADDLEBAG
EXTENSION KIT
REAR FENDER EXTENSION
AND FILLER PANEL
•Heavy 18-gauge raw steel construction
•Designed to fill in and extend the rear of the fender
for a street glide look
•Extends the fender 4” over OEM
•Requires custom mounting; no hardware is included
•Made in the U.S.A.
PART #
DESCRIPTION
1405-0091 For 96-06 FLTR/FLHR/FLHT models w/ OEM hard
bags and OEM 7 1/4” rear fender
SUG. RETAIL
$298.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
PART #
DS-720227
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-720229
DS-720240
CHROME FRAME
SIDE COVERS
DESCRIPTION
Kit for 97-08 FLT and FLHR models
(except FLHX/FLHRS/FLHRCI)
Fender cover only, 97-08 FLT and FLHR models
Saddlebag extensions only (pr.)
•These are the genuine
rear frame side covers
•Highly polished,
then chrome-plated
to add a unique, clean
look to the right and left rear frame castings
•Left side cover has two additional holes at the bottom that allow secure
mounting and prevent any rattling
PART #
DS-380511
BRAKES
•Developed to fit directly over
existing rear fender; some
modification is required
•Fender cover cleans up that ugly
gap between
fender and factory saddlebags
•Saddlebag extensions can be bolted
on, or for custom applications they can be fiberglassed to
existing saddlebags
•Kit includes one fiberglass fender cover, two fiberglass saddlebag
extensions and all necessary mounting hardware
•Components are available separately
•Parts require finishing and painting
DESCRIPTION
For 86-99 FXST and FLST
$527.95
241.95
294.95
DS-373977
SUG. RETAIL
$53.95
ENGINE
TURNED DESIGN
FRAME INSERTS
SUG. RETAIL
DS-380513
BOOMERANG FRAME COVERS
•Unique, eyecatching design
•Four-piece set held
in place with selfadhesive backs
•Made in the U.S.A.
PART #
DESCRIPTION
1902-8001
For 84-07 FXST/FLST models
(except 00-07 FXSTD, FLSTF, 05-07 FLSTN)
•High-quality chrome metal covers
•Wrap around the front and rear edges of the frame for
complete coverage
•Not for use with passenger floorboards
•Fit belt drive Softail models
SUG. RETAIL
$104.95
R.O.C. Design Patent #37113, U.S. Patent #349,266
PART #
DESCRIPTION
1906-0001
For 00-07 FXSTD w/ low exhaust
DS-373977
For 00-07 FLSTF
DS-380513
For 86-99 FXST, FXSTS, FLST models
SUG. RETAIL
$99.95
99.95
99.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
968
FRAME INSERTS
•Four-piece chrome steel insert set dresses up
any Softail frame
•Held securely in place by special adhesive tape
•Fits neatly into the recessed area of all
frame sections
PART #
DESCRIPTION
DS-380510
For 84-07 Softail models (except
00-07 FLSTF/FXSTD, 05-07 FLSTN)
ENGINE SKID PLATE
•A polished stainless steel version
of the OEM painted skid plate
•Mounting hardware not included
SUG. RETAIL
$15.95
PART #
DS-240090
DESCRIPTION
For 36-84 Big Twin 4-speeds and 84-99 Softail
models; replaces OEM #24490-36
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$29.95
SECTION
CUSTOM
TOP TREES
DS-222998
WINDSHIELDS
0602-0037
•Chrome-plated
billet aluminum
•Allows the use of
most handlebars
or risers with the
standard 3.5”
bolt center
•Made in the U.S.A.
17
TOURING
PART #
DS-222998
DS-333998
DESCRIPTION
For 88-06 FXSTS
For 97-03 FLSTS, 05-07 FLSTSC
LUGGAGE
SUG. RETAIL
$182.95
182.95
SPRINGER TOP TREES
FOR FAT BARS
•Chrome-plated billet aluminum construction
•Allows the use of 1” - 11/2” T-bars with 31/2” center to be mounted
without the riser hanging over the edge of the tree
•Also allows the use of any riser/bar combination with 31/2” centers to be
used on Springer models
PART #
DESCRIPTION
SUG. RETAIL
0602-0037
For 88-06 FXSTS models
$159.95
0602-0069
For 97-03 FLSTS, 05-07 FLSTSC models
159.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
DS-222926
GASKETS
& SEALS
DS-222949
CHROME 41MM
WIDE GLIDE-STYLE
TRIPLE TREES
“MASSIVE GLIDE” TREES
•This innovative chrome triple tree set from Ness creates
the illusion of an inverted fork using your stock fork legs
•Chrome-plated tree assembly
•Comes complete with trees, covers, stem, headlight
mount and all necessary hardware
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 49-99 WIDE GLIDE WITH 41MM FORKS
DS-222926
Grooved
DS-222949
Radius
SUG. RETAIL
$1,051.95
1,009.95
ELECTRICAL
•Available in radius smooth design
•Features cam locks that secure the fork assembly
in the trees and a new adjustable headlight mount
•Includes top and bottom aluminum trees, steering stem and Allen top
bolt, headlight mount and necessary hardware
•Neck bearings, races, dust shields, bearing cups (if used) and fork stop
must be purchased separately
•Made in the U.S.A.
PART #
DS-222036
DESCRIPTION
For 49-99 Wide Glide-style 41mm forks
SUG. RETAIL
$500.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
106170
BRAKES
41MM
WIDE GLIDE
TRIPLE TREES
TANKS &
OIL FILTERS
106110
0408-0088
•Billet aluminum construction
•Raked trees feature a flush top
0408-0096
design eliminates fork tube nuts
•Come in smooth or ball-milled finish
•Raked triple trees designed for custom frames with a 38° or more rake; not designed for stock V-Twin applications
•Trees accept Pro-One fork stop kits PART #DS-222842 or DS-221926 (sold separately)
•Available in chrome and black anodized finish; with or without integral turn signals
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
NOTE: No fork locking capabilities.
NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated
to determine which degree of rake is most suited for your application. Trees with more than 3° of rake should not be
used in stock frame applications. Not recommended for use on rubber mounted chassis.
FOOTRESTS
& LICENSE
PLATE FRAMES
0408-0102
FOR 84-09 FXST/FLST AND CUSTOM APPLICATIONS
PART #
CHROME
106110
106170
106210
106270
106500
106560
106800
106860
2040-0005
DESCRIPTION
0° rake, smooth
0° rake, smooth w/ turn
3° rake, smooth
3° rake, smooth w/ turn
5° rake, smooth
5° rake, smooth w/ turn
7° rake, smooth
7° rake, smooth w/ turn
Repl. amber lens (pr.)
SUG. RETAIL
signals
signals
signals
signals
$479.95
505.95
543.95
568.95
543.95
568.95
543.95
568.95
7.95
PART #
BLACK ANODIZED
0408-0088
0408-0090
0408-0096
0408-0098
0408-0100
0408-0102
0408-0104
2040-0005
DESCRIPTION
0° rake, smooth
0° rake, smooth w/signals
3° rake, smooth
3° rake, smooth w/ turn signals
5° rake, smooth
5° rake, smooth w/ turn signals
7° rake, smooth
Repl. amber lens (pr.)
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$479.95
505.95
543.95
568.95
543.95
568.95
543.95
7.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
969
SECTION
17
WINDSHIELDS
2406-5415
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
0408-0281
DS-222530
DS-222230
41MM TRIPLE TREES
•Chrome-plated, CNC-machined billet aluminum
•Stem threads into underside of top triple tree for cleaner look
•Available in a smooth or radius groove design
•Made in the U.S.A.
NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry must be calculated to determine which degree of
rake is most suited for your application. Trees with more than 3° of rake should not be used in stock frame applications.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
FOR 84-09 FXST, FXWG AND CUSTOM APPLICATIONS
FOR 84-09 FXST, FXWG AND CUSTOM APPLICATIONS (CONT)
2406-7417
7° Elite smooth; chrome
$598.95 DS-222231
5° Elite; chrome
$598.95
2406-5415
5° Elite smooth; chrome
598.95 FOR 93-05 FXDWG
0408-0281
5° Elite smooth; night series
598.95 DS-222232
5° Elite; chrome
598.95
DS-222530
0° Elite; chrome
514.95 2406-5416
5° Elite smooth; chrome
598.95
DS-222230
7° Elite; chrome
598.95
TRANSMISSION
& DRIVELINE GOTHIC 41MM
0408-0219
0408-0219
TRIPLE TREES
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
•Manufactured from
billet aluminum with a chrome-plated finish
•Unique design features a fork stem that
threads in from the bottom and hidden
stainless steel fork tube caps for a clean,
uncluttered top tree
•External fork stops included
•Lower tree is also drilled and tapped for an
optional internal fork stop
•5° and 7° rake styles
•All hardware is stainless steel
0408-0110
NOTE: Raked triple trees change the
handling characteristics of the motorcycle.
Steering geometry must be calculated to determine which degree of
rake is most suited for your application. Trees with more than 3° of rake
should not be used in stock frame applications.
PART #
DESCRIPTION
FOR 84-09 FXST, FXWG AND CUSTOM APPLICATIONS
0408-0109
5° rake
0408-0110
7° rake
SUG. RETAIL
$722.95
722.95
DASHES
& GAUGES
•Manufactured from billet aluminum
•Available with 3° and 5° rake
•Bottom headlight mount
•Has fork lock capability
•All hardware is stainless steel
•Available with a chrome-plated or Night Series finish
0408-0259
NOTE: Raked triple trees change the handling characteristics of the
motorcycle. Steering geometry must be calculated to determine which
degree of rake is most suited for your application. Trees with more than
3° of rake should not be used in stock frame applications.
PART #
DESCRIPTION
FOR 06-09 FXD MODELS
0408-0219
3° rake, mid glide; chrome
0408-0259
3° rake, mid glide; night series
0408-0220
5° rake, mid glide; chrome
0408-0260
5° rake, mid glide; night series
FOR 06-08 FXDWG MODELS
0408-0221
3° rake, wide glide; chrome
0408-0223
5° rake, wide glide; chrome
BRAKES
TANKS &
OIL FILTERS
ELITE 49MM TRIPLE TREES
0408-0238
SUG. RETAIL
$640.95
640.95
640.95
640.95
640.95
640.95
0408-0239
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES 41MM RAKED TRIPLE TREES
•CNC-machined from billet aluminum
TIRES,
•Feature 3° rake
TUBES &
•Made in U.S.A.
WHEELS
NOTE: Raked triple trees change the handling characteristics of the
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
970
motorcycle. Steering geometery must be calculated to determine which
degree of rake is most suited for your application. Trees with more than
3° of rake should not be used in stock frame applications.
PART #
DESCRIPTION
SUG. RETAIL
FOR FLST, FLSTC, FLSTF WITH STOCK TINS AND NACELLE
0408-0238
Chrome
$649.95
0408-0239
Finned black
799.95
0408-0240
Finned chrome
799.95
0408-0213
49MM WIDE GLIDE
TRIPLE TREES
•Precision machined from
6061 T-6 aluminum
•For use in custom applications when
installing a complete OEM 49mm
front end assembly on a 84-09 FXST or custom style frame
•Available in chrome or polished finish
•Made in the U.S.A. by Custom Cycle Engineering
PART #
0408-0213
0408-0214
DESCRIPTION
49mm Wide Glide polished triple tree
49mm Wide Glide chrome triple tree
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$773.95
610.95
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
CHROMED ALUMINUM TRIPLE TREES
FXSTD-STYLE TRIPLE TREE
•Chrome tree includes upper and lower trees and fork stem
•Accepts 41mm fork legs and has lock capability
NOTE: Does not include stem nut, stem nut washer or fork pinch bolts.
PART #
DESCRIPTION
SUG. RETAIL
1809-2150 FXSTD triple tree; repl. OEM #s 45769-00, 45475-00
$336.95
•Precision-machined from 6061 T-6 aluminum, polished, then
chrome-plated for a show-quality finish
•Include a fork stem bolt and washer, internal fork stop kit,
stem nut cover and all necessary hardware
•Headlight mounting bracket must be ordered separately;
see page 972
•Made in the U.S.A. by Custom Cycle Engineering
PART #
DS-222942
DESCRIPTION
For 49-99 FL, FLH, FXST, FXWG
TRANSMISSION
& DRIVELINE
SUG. RETAIL
$561.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DS-222038
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
CHROME 39MM
CONVERSION KITS
DS-222939
CHROME FL-STYLE TRIPLE TREE
•Forged steel construction and
highly chromed
•A distinctive addition to any Harley Big Twin
model with FXST, FXWG and FL fork
tubes (41mm)
NOTE: These
PART #
DS-222939
DS-280034
•Available in Wide Glide and
Mid-Glide styles
•Feature smooth radius design
•Conversion kits include top
and bottom aluminum trees,
steering stem, top bolt, headlight mount, axle,
axle spacer, disc spacer and fender spacers
•Cam locks secure the fork assembly in the
radius design trees
•Radius trees include an adjustable-style headlight mount
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-222957
NOTE: For dual-disc models you must order disc spacer PART #DS-222958.
DS-280034
do not allow fork-lock capability.
DESCRIPTION
Smooth style
Bottom mount headlight bracket w/ mounting
holes measuring 21/2” on center
SUG. RETAIL
$269.95
24.95
PART #
DESCRIPTION
FOR 87-99 WIDE GLIDE
DS-222039
Radius smooth triple trees
DS-222958
Disc spacer for dual-disc application (1.440”)
FOR 87-99 MID-GLIDE
DS-222038
Radius smooth triple trees
DS-222957
Disc spacer for dual-disc application (.718”)
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$631.95
90.95
631.95
86.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
971
SECTION
17
WINDSHIELDS
TOURING
0408-0209
LUGGAGE
0408-0208
SEATS &
SISSY BARS
DS-222828
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
49MM TRIPLE TREE
CONVERSION KITS
•Precision-machined from 6061 T-6
aluminum, polished, then chromeplated for a show-quality finish
•Include triple trees, a fork stem bolt
and washer, internal fork stop kit,
stem nut cover, axle, disc spacer and
all necessary hardware
•Headlight mounting bracket must be
ordered separately
•Made in the U.S.A. by Custom
Cycle Engineering
PART #
DESCRIPTION
0408-0208
49mm conversion for 92-99
0408-0209
49mm conversion for 00-03
0408-0210
49mm conversion for 04-05
0408-0211
49mm conversion for 88-94
0408-0212
49mm conversion for 00-03
0408-0282
49mm conversion for 06-09
0408-0210
Dyna Glide
Dyna Glide
Dyna Glide
FXR, 88-99 XL
XL
FXD
SUG. RETAIL
$765.95
765.95
765.95
765.95
765.95
765.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DS-223010
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
972
DS-285008
39MM BILLET ALUMINUM
WIDE GLIDE TRIPLE TREE
CONVERSION KITS
•Precision chrome-plated 6061 T-6 billet
aluminum triple trees
•Kit includes triple trees with internal fork stop,
axle, axle spacer, rotor spacer and stem nut
•Made in the U.S.A. by Custom Cycle Engineering
PART #
DS-222516
DS-222902
DS-222515
DS-223010
DS-222502
DS-222941
DS-285008
DS-285009
DS-222908
DS-285009
DESCRIPTION
For 00-03 Dyna Glide models
For 91-99 Dyna Glide models
For 00-03 FXR and XL models
For 87-94 FXR and 88-99 XL models
Disc spacer for 00-03 dual-disc applications (1.440”)
Disc spacer for 87-99 dual-disc applications (1.440”)
Short bottom-mount headlight bracket
Long bottom-mount headlight bracket
Fender spacers for 39mm Wide Glide fork kits
SUG.
RETAIL
$704.95
704.95
704.95
704.95
85.95
85.95
53.95
53.95
59.95
CHROMED
ALUMINUM
MID-GLIDE
CONVERSION
KITS
•Truly unique
looks – turns any
77-03 narrow
glide front end
into a mid-glide
DS-222834
front end, which DS-280291
is between
a narrow glide and a Wide Glide
•Precision machined from 6061 T-6 aluminum, polished, then
chrome-plated for a show-quality finish
•Include an Internal Fork Stop system that fits stock Harley or any other
aftermarket frame; also include neck stem, top nut cover, axle, axle
spacer and rotor spacer
•PART #DS-222828 comes equipped with external locking device
•For models with dual-disc applications, order an extra disc spacer;
sold separately
•Made in the U.S.A. by Custom Cycle Engineering
SUG.
PART #
DESCRIPTION
RETAIL
DS-222518 39mm mid-glide kit for 00-03 Dyna Glide models
$704.95
DS-222829 39mm mid-glide kit for 91-99 Dyna Glide models
704.95
DS-222517 39mm mid-glide kit for 00-03 FXR and 00-03 XL models 704.95
DS-222828 39mm mid-glide kit for 87-94 FXR and 88-99 XL models 704.95
DS-222831 35mm mid-glide kit for 77-83 FX models
704.95
DS-222997 Disc spacer for 39mm 87-99 dual-disc
applications (.940”)
85.95
DS-222832 Disc spacer for 35mm dual-disc applications (1.125”)
85.95
DS-280291 Stock narrow glide headlight/visor mount brackets
for rubber-mount risers
49.95
DS-222834 Fender spacers for 39mm forks .95” wide
59.95
DS-222833 Fender spacers for 35mm forks 1.1” wide
59.95
INDICATOR LIGHT PANEL
•Chrome panel encapsulates the stock
indicator lights
•Allows for a neat and functional method
of mounting indicator lights
•Polarizing plate is provided for those
lights with symbols
•Fits neatly into the oval hole on Custom
Cycle Engineering’s top triple trees
•Made in U.S.A. by Custom Cycle Engineering
PART #
DS-222836
DESCRIPTION
For PART #s DS-222942, DS-223010, DS-222828,
DS-222829 and DS-222831
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$76.95
SECTION
17
2406-3906
WINDSHIELDS
2406-2052
39MM TRIPLE TREE
CONVERSION KITS
2406-2413
•Chrome-plated CNC-machined
T-6 billet aluminum with Elite, Elite
smooth, Smooth and Gothic design
•Available with standard (0°), 3° or 5°
rake triple trees with top OEM style
or bottom headlight mount style
•Kits include upper and lower trees,
stem with nut, fork stop, axle with
spacers, fender and rotor spacers
•Accept stock fork assembly, front fender, front wheel and headlight
•Neck post bearings and races are not included
•Include a single disc spacer
•Made in the U.S.A.
0408-0156
TOURING
2406-2053
LUGGAGE
SEATS &
SISSY BARS
NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry
must be calculated to determine which degree of rake is most suited for your application. Trees
with more than 3° of rake should not be used in stock frame applications.
TOP HEADLIGHT MOUNT STYLE
ELITE STYLE
PART #
DESCRIPTION
FOR 04-05 FXD
0408-0057
0° rake, Wide Glide
0408-0065
3° rake, Wide Glide
FOR 00-03 FXD
2406-3906
0° rake, Wide Glide
2406-2412
3° rake, Wide Glide
FOR 91-99 FXD
2406-3902
0° rake, Wide Glide
2406-2404
3° rake, Wide Glide
FOR 08-09 XL
0408-0277
0° rake, Wide Glide
0408-0272
3° rake, Wide Glide
FOR 04-07 XL
0408-0073
0° rake, Wide Glide
0408-0081
3° rake, Wide Glide
FOR 00-03 XL
2406-3907
0° rake, Wide Glide
2406-2414
3° rake, Wide Glide
FOR 87-99 XL, 87-94, 99 FXR
2406-3903
0° rake, Wide Glide
2406-2406
3° rake, Wide Glide
ELITE SMOOTH STYLE
PART #
DESCRIPTION
FOR 04-05 FXD
0408-0064
3° rake, Mid Glide
0408-0070
3° rake, Wide Glide
FOR 00-03 FXD
2406-2413
3° rake, Wide Glide
FOR 91-99 FXD
2406-2401
3° rake, Mid Glide
2406-2405
3° rake, Wide Glide
FOR 08-09 XL
0408-0262
3° rake, Mid Glide
0408-0274
3° rake, Wide Glide
FOR 04-07 XL
0408-0080
3° rake, Mid Glide
0408-0082
3° rake, Wide Glide
FOR 00-03 XL
2406-2411
3° rake, Mid Glide
2406-2415
3° rake, Wide Glide
FOR 87-99 XL, 87-94, 99 FXR
2406-2403
3° rake, Mid Glide
2406-2407
3° rake, Wide Glide
SMOOTH STYLE
PART #
DESCRIPTION
FOR 04-05 FXD
0408-0058
0° rake, Wide Glide
FOR 04-07 XL
0408-0074
0° rake, Wide Glide
EXHAUST
BOTTOM HEADLIGHT MOUNT STYLE
SUG. RETAIL
$823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
SUG. RETAIL
$842.95
842.95
842.95
842.95
842.95
842.95
842.95
842.95
842.95
842.95
842.95
842.95
842.95
SUG. RETAIL
$823.95
823.95
PART #
DESCRIPTION
DISC SPACERS FOR DUAL-DISC APPLICATIONS
DS-222167
For 00-03 Wide Glide (1.405”)
DS-222170
For 87-99 Wide Glide (1.405”)
ELITE STYLE
PART #
DESCRIPTION
FOR 04-05 FXD
0408-0061
0° rake, Wide Glide
0408-0069
3° rake, Wide Glide
FOR 00-03 FXD
2406-3916
0° rake, Wide Glide
2406-2053
3° rake, Wide Glide
FOR 91-99 FXD
2406-3912
0° rake, Wide Glide
2406-2044
3° rake, Wide Glide
FOR 08-09 XL
0408-0276
0° rake, Wide Glide
0408-0271
3° rake, Wide Glide
FOR 04-07 XL
0408-0077
0° rake, Wide Glide
0408-0085
3° rake, Wide Glide
FOR 00-03 XL
2406-3917
0° rake, Wide Glide
2406-2055
3° rake, Wide Glide
FOR 87-99 XL, 87-94, 99 FXR
2406-3913
0° rake, Wide Glide
2406-2047
3° rake, Wide Glide
ELITE SMOOTH STYLE
PART #
DESCRIPTION
FOR 00-03 FXD
2406-3924
0° rake, Mid Glide
2406-2048
3° rake, Mid Glide
2406-3926
0° rake, Wide Glide
2406-2052
3° rake, Wide Glide
FOR 91-99 FXD
2406-3920
0° rake, Mid Glide
2406-2040
3° rake, Mid Glide
2406-3922
0° rake, Wide Glide
2406-2045
3° rake, Wide Glide
FOR 00-03 XL
2406-3925
0° rake, Mid Glide
2406-2050
3° rake, Mid Glide
2406-3927
0° rake, Wide Glide
2406-2054
3° rake, Wide Glide
FOR 87-99 XL, 87-94, 99 FXR
2406-3921
0° rake, Mid Glide
2406-2042
3° rake, Mid Glide
2406-3923
0° rake, Wide Glide
2406-2046
3° rake, Wide Glide
SMOOTH STYLE
PART #
DESCRIPTION
FOR 04-05 FXD
0408-0060
0° rake, Mid Glide
0408-0068
3° rake, Mid Glide
0408-0062
0° rake, Wide Glide
FOR 08-09 XL
0408-0264
0° rake, Mid Glide
0408-0261
3° rake, Mid Glide
0408-0278
0° rake, Wide Glide
0408-0273
3° rake, Wide Glide
SUG. RETAIL
$109.95
109.95
SUG. RETAIL
$823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
SUG. RETAIL
$823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
823.95
842.95
SUG. RETAIL
$823.95
842.95
823.95
823.95
842.95
823.95
846.95
SMOOTH STYLE (CONT)
PART #
DESCRIPTION
FOR 04-07 XL
0408-0076
0° rake, Mid Glide
0408-0084
3° rake, Mid Glide
0408-0078
0° rake, Wide Glide
0408-0086
3° rake, Wide Glide
GOTHIC STYLE
PART #
DESCRIPTION
FOR 04-05 DYNA
0408-0156
0° rake, Mid Glide
0408-0126
3° rake, Mid Glide
0408-0132
5° rake, Mid Glide
0408-0139
0° rake, Wide Glide
0408-0144
3° rake, Wide Glide
0408-0150
5° rake, Wide Glide
FOR 00-03 DYNA
0408-0155
0° rake, Mid Glide
0408-0125
3° rake, Mid Glide
0408-0131
5° rake, Mid Glide
0408-0137
0° rake, Wide Glide
0408-0143
3° rake, Wide Glide
0408-0149
5° rake, Wide Glide
FOR 91-99 DYNA
0408-0154
0° rake, Mid Glide
0408-0124
3° rake, Mid Glide
0408-0130
5° rake, Mid Glide
0408-0136
0° rake, Wide Glide
0408-0142
3° rake, Wide Glide
0408-0148
5° rake, Wide Glide
FOR 08-09 XL
0408-0265
0° rake, Mid Glide
0408-0263
3° rake, Mid Glide
0408-0266
5° rake, Mid Glide
0408-0279
0° rake, Wide Glide
0408-0275
3° rake, Wide Glide
0408-0280
5° rake, Wide Glide
FOR 04-07 XL
0408-0153
0° rake, Mid Glide
0408-0123
3° rake, Mid Glide
0408-0129
5° rake, Mid Glide
0408-0135
0° rake, Wide Glide
0408-0141
3° rake, Wide Glide
0408-0147
5° rake, Wide Glide
FOR 00-03 XL
0408-0152
0° rake, Mid Glide
0408-0122
3° rake, Mid Glide
0408-0128
5° rake, Mid Glide
0408-0134
0° rake, Wide Glide
0408-0140
3° rake, Wide Glide
0408-0146
5° rake, Wide Glide
FOR 87-99 XL AND 87-94/99 FXR
0408-0151
0° rake, Mid Glide
0408-0121
3° rake, Mid Glide
0408-0127
5° rake, Mid Glide
0408-0133
0° rake, Wide Glide
0408-0138
3° rake, Wide Glide
0408-0145
5° rake, Wide Glide
PART #
DESCRIPTION
DISC SPACERS FOR DUAL-DISC APPLICATIONS (CONT)
DS-222168
For 00-03 Mid Glide (.707”)
DS-222169
For 87-99 Mid Glide (.707”)
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$823.95
842.95
823.95
846.95
SUG. RETAIL
$869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
869.95
SUG. RETAIL
$109.95
109.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
973
SECTION
17
49MM WIDE-GLIDE CONVERSION KITS
•Manufactured from billet aluminum
•Available with 3° and 5° rake
•Include triple trees, rotor spacer, fender spacers, axle spacers, axle and instructions
•Available with a chrome-plated or Night Series finish
WINDSHIELDS
0408-0268
NOTE: Raked triple trees change the handling characteristics of the motorcycle. Steering geometry
must be calculated to determine which degree of rake is most suited for your application. Trees
with more than 3° of rake should not be used in stock frame applications.
TOURING
PART #
FOR 08-09 FXD
0408-0267
0408-0268
0408-0269
0408-0270
LUGGAGE
SEATS &
SISSY BARS
DESCRIPTION
SUG. RETAIL
MODELS
3° rake; chrome
$846.95
3° rake; night series
846.95
5° rake; chrome
846.95
5° rake; night series
846.95
PART #
FOR 06-07 FXD
0408-0222
0408-0224
DESCRIPTION
MODELS
3° rake; chrome
5° rake; chrome
SUG. RETAIL
$846.95
846.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
DS-222943
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-222916
39MM CHROME
STEEL WIDE GLIDESTYLE TRIPLE TREE
CONVERSION KITS
•Converts 39mm
narrow glide to Wide
DS-222944
Glide width on single-disc
Dyna Glide, FXR and XL models
•Fork tubes are clamped through the upper and lower trees with
pinch bolts
•Top tree accommodates the stock handlebar dampers; lower tree locks
the front fork assembly to the frame
•Kits include chromed steel upper and lower trees, fork stops, one
aluminum disc spacer (1.440”), 10 socket head screws, axle spacers,
one axle and a crown or top nut
•Made in the U.S.A. by Custom Cycle Engineering
NOTE: Lower tree is drilled to accept bottom-mount headlight mount.
PART #
DS-222943
DS-222951
DS-222941
DS-222944
DESCRIPTION
Wide Glide kit for single disc 87-99 FXR and XL
Wide Glide kit for single disc 91-99 Dyna Glide
Disc spacer for 87-99 dual disc
applications (1.440”)
Chrome headlight mount brackets to mount
OEM headlight/visor to PART #s DS-222943/
DS-222951
•Converts narrow glide front ends to the width of Harley’s
Wide Glide models
•Machined steel plates; no fork stops are provided but can
be purchased separately
•Lower tree drilled to accept a bottom headlight mount
•Made in the U.S.A. by Custom Cycle Engineering
PART #
DS-222916
DS-222932
DS-222933
DESCRIPTION
Kit for 78-83 FX with dual-disc brakes (includes
triple trees, top nut, crown nut, axle, axle
spacers, hub bolts, disc spacers)
Fork stops for a narrow FX, XL style of gas
tank (pr.)
Fork stops for split tanks (pr.)
SUG. RETAIL
$610.95
47.95
47.95
•Allow the use of narrow glide 19” or 21” wheel (found
on FX, FXR, FXD and XL models) to be installed in a 41mm
Wide Glide front end
•Include aluminum disc spacer (second spacer for dual disc
available), socket head screws, axle spacer and axle
•Spacer and axle are cadmium plated; disc spacer
is chrome plated
•Made in the U.S.A.
1809-8001
1809-8002
HARDWARE,
CHEMICALS
& TOOLS
974
WIDE GLIDE-STYLE CONVERSION KIT
85.95
71.95
DS-222933
NARROW-TO-WIDE GLIDE CONVERSION KITS
TIRES,
TUBES &
WHEELS
COVERS,
SECURITY
& GENERAL
SUG. RETAIL
$663.95
663.95
DS-222932
PART #
1809-8001
1809-8002
DS-222964
DS-222964
DS-222963
DS-222946
DESCRIPTION
SUG. RETAIL
Conversion kit for 00-06 single disc (except
04-06 FXD models)
$177.95
.8750” disc spacer (required for dual-disc
applications on 00-06 models)
85.95
Conversion kit for 84-99 single disc
177.95
1.050” spacer (required for dual-disc applications
on 84-99 applications)
85.95
Conversion kit for 77-83 dual disc
234.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
17
WINDSHIELDS
DS-222842
TOURING
EXTERNAL FORK STOP KIT
•Provides simple and reliable fork
stop for custom applications
•Bracket is 6061 T-6 aluminum with
a chrome finish (31/4” o.c. holes)
•Stop is cold-rolled steel and is
drilled and tapped for 10-24 bolt
(requires welding to frame neck)
•Made in the U.S.A.
PART #
DESCRIPTION
0418-0001
For custom applications
DS-221926
LUGGAGE
FORK STOP KITS
SUG. RETAIL
$49.95
•Work on all Pro-One triple trees and many others
•Installation on other trees may require
some drilling
•Available in two styles
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 60-88 BIG TWIN MODELS
DS-222842
Hide-Away fork stop kit
FOR 89-99 FXST/FLST AND 93-95 FXDWG MODELS
DS-221926
Internal fork stop kit
SEATS &
SISSY BARS
SUG. RETAIL
$116.95
88.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
STEERING STEM
BEARINGS AND KITS
UNIVERSAL FORK STOP
•Polished stainless steel construction
•Has two pinch-type stops on a horseshoe bracket
that bolts to the lower triple tree
•For custom applications
PART #
DS-222968
DESCRIPTION
Fork stop
SUG. RETAIL
$59.95
TRANSMISSION
& DRIVELINE
•PART #22-10320 neck post bearing
and race complete replacement set
(includes two bearings, two races
and two dust seals)
•Neck post bearing/race set
and neck post bearing also
available individually
GASKETS
& SEALS
PART #
DESCRIPTION
SUG. RETAIL
FOR 60-84 FL; 71-85 FX; 80-86 FXWG; 84-09 FXST, FLST; 82-09 XL, 82-94
FXR; 91-09 DYNA GLIDE, 80-09 FLT, FLHT, FLTR, FLHR AND 02-09 V-ROD
22-1032
Neck post bearing and race set; repl. OEM #s
48300-60 bearing and 48315-60 race
$22.95
0410-0090 Bearing and race set
$9.95
0410-0091 Neck post bearing only; repl. OEM #48300-60 (ea.)
6.95
CHROME
ADJUSTABLE
STEERING STOP
•Machined from
billet aluminum,
chrome finish
•Made in the U.S.A.
PART #
DS-222874
DESCRIPTION
For most 49-99 Wide Glide models
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
SUG. RETAIL
$62.95
CABLES
NECK POST
BEARING
AND RACES
BRAKES
•Genuine Timken® brand
•Sold individually for
various H-D models
PART #
DESCRIPTION
SUG. RETAIL
FOR 60-84 FL; 71-85 FX; 80-86 FXWG; 84-09 FXST, FLST; 82-09 XL, 82-94
FXR; 91-09 DYNA GLIDE, 80-09 FLT, FLHT, FLTR, FLHR AND 02-09 V-ROD
DS-222700 Timken bearing and race set
$13.95
DS-222855 Neck post bearing only; repl. OEM #48300-60 (ea.)
10.95
DS-222860 Race only; repl. OEM #48315-60 (ea.)
5.95
FOR 79-81 XL
DS-222860 Race only; repl. OEM #48315-60 (ea.)
5.95
DS222800
TANKS &
OIL FILTERS
DASHES
& GAUGES
NECK POST BEARING KIT
•Includes two Timken neck post bearings, two
chromed bearing cups and two chromed
dust covers
PART #
0410-0018
DESCRIPTION
For 60-84 FL and FLH; 71-85 FX; 80-86 FXWG;
84-88 FXST and FLST models
SUG. RETAIL
$104.95
STEERING
STEM
BEARING
ADJUSTING NUTS
1305-0700
NECK POST BEARING CUPS
•Adjusting nuts are available in a chrome finish with
dust cover or a zinc finish without a dust cover
•Chrome Timken-type bearing cups
•Cups sold in pair, races sold each
PART #
DESCRIPTION
SUG. RETAIL
FOR 60-84 FL, FLH, 71-85 FX, 80-86 FXWG AND 84-88 FXST/FLST
1305-0700
Chrome bearing cups w/ races installed (pr.)
$44.95
DS-222800 Chrome bearing cups w/o races installed (pr.)
27.95
DS-222860 Race (ea.)
5.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
DS-222777
PART #
DESCRIPTION
FOR 49-09 BIG TWIN AND 00-09 FXST/00-05 FXDWG MODELS
DS-222776
Chrome nut w/ dust cover; repl.
OEM #48330-86A (ea.)
DS-222777
Zinc nut w/o dust cover; repl.
OEM #48332-48B/C (ea.)
All part numbers in BOLD MAGENTA are new for 2009.
FRAMES,
SUSPENSION
& FENDERS
SUG. RETAIL
$19.95
8.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
975
SECTION
17
WINDSHIELDS
FORK STEM DUST COVERS
TOURING
LUGGAGE
STEM NUT
AND LOCK WASHER KIT
•Upper and lower set of zinc-plated
dust covers
•For use with Timken bearings
•Sold in pairs
PART #
DS-222961
DESCRIPTION
SUG. RETAIL
For 76-09 Big Twin (except 06-09 Dyna Glide) and
82-03 XL models (repl. OEM #s 48361-80/48365-48A)
$6.95
•Precision-machined stock stem
nut and stamped steel lock washer
•For models without steering damper
•Made in the U.S.A.
PART #
DESCRIPTION
DS-189813
49-77 Wide Glide models
SUG. RETAIL
$12.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
2401-0118
2401-0117
TRANSMISSION STEM BOLT KIT
& DRIVELINE •Zinc-plated stem bolt with washer
GASKETS
& SEALS
STEM NUT LOCK WASHERS
•Chrome-plated stem cap available separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 89-09 FLST, FXR, FXD AND XL MODELS
2401-0117 Stem bolt and washer kit; (repl. OEM #4453 / 6655)
$8.95
2401-0118 Chrome plated stem cap
8.95
•Stem nut lock washers for triple trees;
replaces OEM #45717-63
•Sold in 10-pk.
•Made in the U.S.A.
PART #
DS-222158
DESCRIPTION
63-09 Wide Glide models
SUG. RETAIL
$15.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
CHROME STEM BOLT
COVER AND RUBBER PLUG
•Chrome stem bolt cover and
rubber plug for models without
steering damper
•Made in the U.S.A.
PART #
DS-222792
DESCRIPTION
57-78 XL
SUG. RETAIL
$14.95
BRAKES
STEERING STEM BOLT COVER
•Billet aluminum construction with
a chome-plated finish
•Fits over steering stem bolt
•Sold each
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
976
0410-0092
0410-0094
0410-0093
PART #
0410-0100
DESCRIPTION
For XL, FXD and FXR models w/ 39mm forks
SUG. RETAIL
$9.95
FORK STEM
CAP NUTS
•Quality billet
aluminum
construction
•Chrome-plated
•Sold each
PART #
DESCRIPTION
FOR 80-09 WIDE GLIDE MODELS (EXCEPT 06-09 FXDWG)
0410-0092
Warrior
0410-0093
Speed mill
0410-0094
Reflections
0410-0095
Nasty
0410-0095
SUG. RETAIL
$39.95
39.95
39.95
39.95
CHROME FORK
STEM NUT CAP
•Sold separately
•Replaces OEM #45670-80
•Made in the U.S.A.
PART #
1913-3001
DESCRIPTION
Most 80-09 Wide Glide
SUG. RETAIL
$11.95
DS-193009
DS-193619
STEM NUTS
•Chrome-plated replacement
stem nuts for a variety of stock
and custom front ends and
triple trees
•Sold individually
DS-193002
DS-193004
PART #
DESCRIPTION
SUG. RETAIL
FOR 48-09 FL, 80-86 FXWG, 84-09 FXST/FXSTC, 93-08 FXDWG
DS-193009
Acorn nut; (repl. OEM #45718-60)
$11.95
FOR 36-77 BIG TWIN
DS-193002
Acorn nut w/ shoulder
16.95
FOR 71-85 FX, 82-87 FXR/FXRS/FXRT AND 78-87 XL
DS-193619
Hex nut; (repl. OEM #45718-71)
20.95
FOR 57-78 XL
DS-193004
Hex nut
18.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
DS-222911
DS-222910
SEATS &
SISSY BARS
CHROME FORK TINS AND SLIDER COVERS
DS-222898
•High-quality chromed reproduction fork tins
•Slider covers can also be purchased separately
CHROME HEADLIGHT TIN
•Constructed of 16-gauge cold-rolled steel
•Cleans up the front end of your factory
bike in minutes; makes your bike look
different from the others
•Replaces the existing center tin behind
the headlight
PART #
2001-0056
DESCRIPTION
For 86-08
FLSTC models
EXHAUST
NOTE: Models equipped with front passing lights may need
a hole drilled in the rear panel for on/off switch.
SUG. RETAIL
$339.95
NOTE: Always check slider covers for proper clearance.
FUEL/AIR
SYSTEMS
NOTE: Bottom area of slider covers may need to be formed slightly to clear lower
legs and fender.
PART #
DESCRIPTION
FOR ALL 86-08 FLST MODELS
DS-222910
3-piece fork tins; repl. OEM #67808-86, 67816-86, 67820-86
DS-222911
5-piece fork tins; repl. OEM #67808-86, 67816-86, 67820-86, 45964-86
DS-222898
Chrome slider covers; repl. OEM #45964-86 (pr.)
DS-222937
Chrome slider covers for 49-88 FL models; repl. OEM #45964-49 (pr.)
SUG. RETAIL
$92.95
124.95
38.95
39.95
0411-0001
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
0411-0003
0411-0004
0411-0007
RETRO FORK
BOOT COVERS
LIGHTING
•Replaces OEM lower
fork leg covers
•Machined from forged
6061 T-6 billet aluminum
•Available in chrome,
black anodize and black anodize with
diamond cut edges
FORK BELLOWS
•CNC machined from billet aluminum
•Sold in pairs
•Made in the U.S.A.
0411-0002
NOTE: When installing on FLST models or other models with a custom
front fender, check fender clearance before operating the motorcycle.
PART #
DESCRIPTION
SUG. RETAIL
FOR 49-84 FL, 80-09 FLT, FLHT AND 86-09 FLST MODELS
0411-0001
Finned, black
$299.95
0411-0002
Finned, chrome
299.95
HANDLEBARS,
CONTROLS
& MIRRORS
PART #
DESCRIPTION
FOR 86-09 FLST/C/N, FLHR, FLTR, FLT AND 90-09 FLSTF
0411-0003
Chrome
0411-0004
Black
0411-0007
Black diamond cut
FOR 86-09 FLHT AND 06-09 FLHX
0411-0005
Chrome
0411-0006
Black
0411-0008
Black diamond cut
SUG. RETAIL
CABLES
$220.95
220.95
300.95
BRAKES
220.95
220.95
300.95
TANKS &
OIL FILTERS
0412-0096
DASHES
& GAUGES
0412-0097
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
WIND GUARDS
PART #
0412-0096
0412-00971
1
DESCRIPTION
For 60-84 FL/FLH;
repl. OEM #58123-77
For 83-09 FLHT/FLHR/FLHS;
repl. OEM #58121-85B
TIRES,
TUBES &
WHEELS
CHROME LOWER
TRIPLE TREE COVER
•Chrome plated
•Mount easily to front fork brackets
•Deflect wind away from legs and feet
SUG. RETAIL
Not for models equipped with fairing lowers
or lighted fork slide kit.
$57.95
57.95
•Used to cover up the casting
on the lower triple tree
FRONT FORK AIR BAFFLE
•Chrome-plated stamped steel
•Designed to deflect the elements away from
the driver
PART #
DS-222979
DESCRIPTION
For 80-09 FLT and FLHT;
repl. OEM #58520-79B
SUG.
RETAIL
$19.95
All part numbers in BOLD MAGENTA are new for 2009.
PART #
DS-222139
DESCRIPTION
For 80-99 FXWG,
FXST/C; repl.
OEM #s 67773-80
and 67773-80A
SUG.
RETAIL
HARDWARE,
CHEMICALS
& TOOLS
$21.95
COVERS,
SECURITY
& GENERAL
977
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
CUSTOM WIDE SPRINGER
FRONT FORKS
•Classic springer looks with quality second to none from
the premier springer manufacturer
•Two versions available in various lengths
•Wide springer without shock features mounting points
for dual disc brakes;
no front fender mounting points
•Wide springer with shock has a front fender mount
similar to the 88-92 FXSTS
•Distance between rear legs is 8 5/16”;
outside width is 91/2”
•Forks come assembled and include fork neck, top nut,
crown nut, riser-style top clamp and inner springs
•Both springers use standard 1” neck bearings
•Require use of the Paughco axle, available separately;
fork recommended for 21”
wheels only
•Require 1/2-20 riser stud/bolt
NOTE: Overall length is measured from the bottom of the
top clamp to the center of the rear leg pivot. Please note
that 25” stock length forks are the same length as OEM
P-181-ST
forks used on 48-84 FLH Big Twins. The correct length
for the equivalent of a FXSTS springer fork would be +3”
over stock (28” total).
P-S181-ST
P-181-3
FOR ALL 36-09 BIG TWINS (EXCEPT FLT, FLHT, FLHR, FLTR, 04-07 FXD/FXDWG) AND ALL 82-03 XL MODELS
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL PART #
WIDE SPRINGER W/O SHOCK
WIDE SPRINGER W/ SHOCK
AXLES
P-181-ST
Standard; 25” L
$1,267.95 P-S181-ST Standard; 25” L
$1,483.95 P-186B1
P-181-3
+3” over stock; 28” L
1,267.95 P-S181-3
+3” over stock; 28” L
1,483.95 P-186A1
P-181-6
+6” over stock; 31” L
1,267.95 P-S181-6
+6” over stock; 31” L
1,483.95
DESCRIPTION
3/4”
3/4”
SUG. RETAIL
axle kit; OEM brake
axle kit; PM brake
$93.95
93.95
ELECTRICAL
1809-2610
1809-2613
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
1809-2619
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
1809-2612
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
978
NARROW SPRINGER FORKS
WITH TAPERED REAR OVAL LEGS
1809-2617
•Forks come complete with axle, axle spacers,
top nut, crown nut and top triple tree
(for stock-style handlebar risers)
•Do not include shocks or fender mounts
•Available in three lengths: 30”, 33” and 36”
•Made in the U.S.A.
TAPERED LEG WIDE SPRINGER FRONT FORKS
•Feature a tapered leg design like that found on the new-style OEM springer
•Springer forks come in seven lengths and do not have a shock or fender mounts
•The 42”, 45” and 48” springers have a built-in 3° rake so you have less front-end flop
•Each fork includes an axle, axle spacers, top nut, crown nut, top triple tree (for stock-style
handlebar risers) and brake caliper anchor
•Made in the U.S.A.
NOTE: Overall length is measured from the
bottom of the top clamp to the center of the
rear leg pivot.
NOTE: For use with a narrow glide wheel
assembly only.
PART #
DESCRIPTION
SUG. RETAIL
FOR 48-84 FL/FX (EXCEPT 80-84 FLT), 84-09
FXST/FLST, 84-94 FXR, 78-03 XL AND MOST
CUSTOM FRAMES THAT USE A 1” NECK BEARING
1809-2618
30” springer fork
$2,116.95
1809-2619
33” springer fork
2,176.95
1809-2620
36” springer fork
2,234.95
NOTE: Overall length is measured from the top of the top clamp to the center of the rear leg pivot.
SUG.
SUG.
PART #
DESCRIPTION
RETAIL PART #
DESCRIPTION
RETAIL
FOR 48-84 FL/FX (EXCEPT 80-84 FLT), 84-09
FOR 48-84 FL/FX (EXCEPT 80-84 FLT), 84-09
FXST/FLST, 84-94 FXR, 78-03 XL AND MOST
FXST/FLST, 84-94 FXR, 78-03 XL AND MOST
CUSTOM FRAMES THAT USE A 1” NECK BEARING
CUSTOM FRAMES THAT USE A 1” NECK
1809-2610 27” springer
$2,058.95 BEARING (CONT)
1809-2612 33” springer
2,176.95 1809-2615 42” springer with 3° rake $2,352.95
2,411.95
1809-2613 36” springer
2,234.95 1809-2616 45” springer with 3° rake
2,469.95
1809-2614 39” springer
2,293.95 1809-2617 48” springer with 3° rake
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
17
WINDSHIELDS
41MM DEUCE-STYLE
FORK LEG ASSEMBLIES
TOURING
FXSTD-STYLE
FRONT FORK ASSEMBLY
•Complete assemblies include stocklength fork tubes, chrome lower
legs, dust covers, bushings, springs,
damper tubes and seals
•Lower legs have vertical fender
mounting holes
•Accept 00-06 style single-disc brake
•Sold in pairs
•Stock-length fork assembly includes chrome triple
trees, chrome fork legs with satin fork tubes,
all internal components and axle with spacer
•Triple trees accept FXSTD risers or standard risers
when used with riser inserts PART #DS-289290
•For use with 00-06 single-disc-style brake
NOTE: Do not come with fork oil.
PART #
DESCRIPTION
1809-2160 41mm 00-06 Deuce-style fork leg assemblies;
repl. OEM #s 46064-00 and 46066-00
SUG. RETAIL
$586.95
LUGGAGE
SEATS &
SISSY BARS
NOTE: Fork assembly does not include fork oil,
top tree nut and washer (use PART #DS-189813)
or fork pinch bolts.
PART #
1809-2140
DESCRIPTION
00-06 FXSTD fork assembly; repl. OEM #45343-00
SUG. RETAIL
$864.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
STOCK LENGTH
BILLET LOWER
FORK LEGS
•Include removable caliper
1809-0000 114020
0403-0007
0403-0008 0403-0005
brackets for single- and
dual-caliper applications
(except Missile and Rocket style legs)
•Accept stock or custom calipers using 11.5” rotors (calipers not included)
•Feature hidden billet aluminum fender supports
•Available in black anodized or chrome finish; Missile and Rocket styles only available
in chrome
FOR 84-99 FXST, 93-99 FXDWG AND 84-86 FXWG
PART #
CHROME
1809-0000
114020
0403-0007
DESCRIPTION
Smooth, flat
Smooth, round
Missile-style
SUG. RETAIL
$757.95
757.95
757.95
PART #
DESCRIPTION
CHROME (CONT)
0403-0008
Rocket-style
BLACK
0403-0005
Smooth, round
SUG. RETAIL
$757.95
757.95
TRANSMISSION
& DRIVELINE
DS-219881
FORK SKINS™
•An economical way to chrome
the front fork lower legs
•Include a fork brace
for superior handling
•Easy installation; no disassembly required
PART #
DESCRIPTION
SINGLE-DISC APPLICATIONS
DS-219884 For 00-06 FXST, 00-05 FXDWG
41mm forks (except FXSTD)
DS-219886 For 00-07 39mm forks
DS-219881 For 88-99 39mm forks
GASKETS
& SEALS
SUG. RETAIL
$195.95
195.95
195.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
LOWER LEG ACCENTS
•Quick, easy way to add a beautiful chrome finish on lower fork legs (fender bosses down) and
brake caliper brackets
•Does not require the front end to be dismantled for installation
•Stamped steel construction with a durable chrome finish
•Sold as a complete kit
PART #
DESCRIPTION
SUG. RETAIL
0403-0017
For 00-07 FLHT/FLHR/FLTR and FLHX
$279.95
0403-0018
For 08-09 FLHT/FLHR/FLTR and FLHX (do not include caliper covers)
199.95
CABLES
BRAKES
0403-0017
TANKS &
OIL FILTERS
2401-0015
FORK SLIDER DRAIN SCREWS
•Chrome-plated button head Allen screws with copper compression washers
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
FOR 73-09 FX, FXR AND XL MODELS
FOR 80-09 FXWG, FLT AND SOFTAIL/77-84 FL MODELS
2401-0115
Chrome slider drain screw
$3.95 2401-0116
Chrome slider drain screw
$4.95
FORK
DRAIN PLUGS
2401-0393
FORK DRAIN
SCREW KITS
•Kits include chrome
button screws
and seal washers
PART #
DESCRIPTION
FOR 73-09 FX, FXR AND XL MODELS
2401-0393
Drain screw kit; repl. OEM #45790-80BH
FOR 94-05 DYNA AND 99-00 FXR
2401-0394
Drain screw kit; repl. OEM #45790-80CS
2401-0394
SUG. RETAIL
$3.95
3.95
DASHES
& GAUGES
DS-190714
•For 49-09 Big Twin
and XL models
•Sold in pairs (Allenhead kits include
DS-190710
Allen wrench)
DS-190713
PART #
DESCRIPTION
SUG. RETAIL
FOR L77-09 W/ 41MM TUBES; REPL. OEM #45858-77
DS-190710
Polished, Allen-head
$5.95
2401-0291
Chrome, Allen-head
4.95
2401-0292
Chrome, button-head
5.95
FOR 73-09 W/ 35 OR 39MM TUBES (EXCEPT XL1200S);
REPL. OEM #45790-80
DS-190713
Chrome, Allen-head
2.95
FOR 49-E77 W/ 41MM TUBES; REPL. OEM #45830-48
(NO WASHERS)
DS-190714
Chrome, Allen-head (no washers)
3.95
All part numbers in BOLD MAGENTA are new for 2009.
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
979
SECTION
17
WINDSHIELDS
0404-0049
1809-0028
1809-0035
TOURING
49MM HARD
CHROME FORK TUBES
LUGGAGE
HARD CHROME FORK TUBE ASSEMBLIES
•Assemblies come complete with fork tubes, springs, damping rods,
bushings, clips, seals, slider tube caps, fork tube plugs and O-rings
•Available in a wide range of lengths for virtually any
custom application
•Sold in pairs
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
NOTE: Customer must install fork oil.
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-99 FLST/F/N, L84-99 FXST/C,
L84-86 FXWG, 93-99 FXDWG
AND L84-96 FLT MODELS
0404-0031 22.25”
$252.95
1809-0028 24.25” (OEM
length)
265.95
1809-0029 26.25”
277.95
1809-0030 28.25”
290.95
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-99 FLST/F/N, L84-99 FXST/C,
L84-86 FXWG, 93-99 FXDWG
AND L84-96 FLT MODELS (CONT)
1809-0031 30.25”
$310.95
1809-0032 32.25”
335.95
1809-0033 34.25”
366.95
1809-0034 36.25”
385.95
1809-0035 38.25”
398.95
•Finish is electrolyzed for increased hardness of 55-60 Rockwell
•Increases hardness for better long lasting corrosion resistance
•Smoother finish creates less drag and seal wear
•Not as bright of finish as chrome, but more durable
•Check length before ordering
•Sold in pairs
•Lengths given for OEM replacements may not be the exact
OEM length
•Made in the U.S.A.
PART #
DESCR.
FOR 06-09 FXD/FXDWG
0404-0049
23.50”
0404-0050
25.50”
0404-0051
27.50”
0404-0052
29.50”
0404-0053
31.50”
SUG.
RETAIL
$375.95
379.95
383.95
387.95
394.95
PART #
DESCR.
FOR 06-09 FXD/FXDWG
0404-0054
33.50”
0404-0055
35.50”
0404-0056
37.50”
0404-0057
29.50”
SUG.
RETAIL
(CONT)
$398.95
402.95
408.95
412.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
980
0404-0033
SHOW CHROME
FORK TUBES
•Designed to fit a wide
variety of models
•Sold in pairs
•Lengths given for OEM
replacements may not be
the exact OEM length
•Made in the U.S.A.
DS-221471
DS-221472
DS-221420
DS-221425
35MM
DS-221360
SUG.
RETAIL
PART #
DESCRIPTION
FOR 84-86 FXRS; 86 FXR; 84-85 FXSB,
FXE/F; 84-87 XL MODELS
DS-221420 23.50” (Repl. OEM #45407-83
FXE/F, FXR/S, XL)
$181.95
DS-221421 25.50” (Repl. OEM #45392-83
FXSB, FXRT)
185.95
DS-221422 27.50”
189.95
DS-220126 29.50”
194.95
FOR 76-83 FX/FXR; 75-83 XL MODELS (SHOWA)
DS-221200 23.25” (Repl. OEM #45407-73
FX, XL)
181.95
DS-221205 25.25” (Repl. OEM #45644-77
FXR, FXRS, FXS, FXB, FXSB)
185.95
DS-221210 27.25”
189.95
DS-221220 29.25”
194.95
DS-220122 38.25”
222.95
FOR 73-76 FX; 73-74 XL MODELS (KAYABA)
DS-220100 23.50” (Repl. OEM #45977-73
FX, XL)
181.95
DS-220108 25.50”
185.95
DS-220110 27.25”
189.95
FOR 52-72 FX, XL AND K (1.312 DIA.) MODELS
DS-220000 23” (Repl. OEM #45953-71
FX, XL)
181.95
39MM
PART #
DESCRIPTION
SUG. RETAIL
FOR 87-94 FXR, 91-05 FXDL, FXD AND 87-07 XL
MODELS (EXCEPT 1200S, 00-05 FXDX/FXDXT)
DS-221470 22.25”
$187.95
DS-221471 24.25” (Repl. OEM
#45360-90 FXR, XL)
191.95
DS-221472 26.25”
196.95
DS-221473 28.25”
200.95
DS-220123 30.25”
206.95
DS-220124 32.25”
210.95
DS-220125 34.25”
214.95
41MM
41MM (CONT)
SUG.
RETAIL
PART #
DESCRIPTION
FOR 00-09 FLSTC/F, FXST (EXCEPT FXCW/
FXCWC), 93-05 FXDWG, 97-01 FLT AND
97-09 FLHR MODELS
DS-220109 20.25” (Repl. OEM #45890-97
FLT/FLHT)
$179.95
DS-220115 22.25” (Repl. OEM #45930-00
FLST/C/F)
183.95
DS-220111 24.25” (Repl. OEM #45417-00
FXST/C, FXDWG)
187.95
DS-220112 26.25”
191.95
DS-220113 28.25”
196.95
DS-220114 30.25”
200.95
DS-220119 32.25”
206.95
DS-220120 34.25”
210.95
DS-220121 36.25”
214.95
FOR 86-99 FLST/F/N, L84-99 FXST/C, L84-86
FXWG, 93-99 FXDWG, L84-96 FLT AND FLHT
DS-221425 20.25” (Repl. OEM #45827-84
FLT, FLHT)
179.95
DS-221426 22.25” (Repl. OEM #45930-86
FLST/C/F/N))
183.95
DS-221427 24.25” (Repl. OEM #45417-84
FXST/C, FXWG, FXDWG)
187.95
DS-221428 26.25”
191.95
DS-221429 28.25”
196.95
DS-221435 30.25”
200.95
DS-221436 32.25”
204.95
DS-221437 34.25”
210.95
FOR L77-E84 FL, FLH, 80-83 FLT AND FLHT
DS-221350 20.75” (Repl. OEM #45825-77A
FL, FLH, FLT, FLHT)
171.95
DS-220116 22.75”
175.95
DS-221360 24.75”
181.95
SUG.
PART #
DESCRIPTION
RETAIL
FOR L77-E84 FL, FLH,
80-83 FLT AND FLHT (CONT)
DS-220118 26.75”
$185.95
FOR 80-E84 FXWG
DS-221235 24.75” (Repl. OEM
#45417-80 FXWG)
181.95
DS-221236 26.75”
185.95
DS-221237 28.75”
189.95
DS-221238 30.75”
194.95
DS-220117 32.75”
198.95
FOR 49-E77 FL AND FLH
DS-221400 20.50” (Repl. OEM #45950-48
FL, FLH)
155.95
DS-221408 22.50”
159.95
DS-221410 24.50”
163.95
DS-221411 26.50”
167.95
49MM
PART #
DESCRIPTION
FOR 06-09 FXD/FXDWG
0404-0033 23.50”
0404-0034 25.50” (Repl. OEM#
46605-06 FXD)
0404-0035 27.50” (Repl. OEM#
46617-06 FXDWG)
0404-0036 29.50”
0404-0037 31.50”
0404-0038 33.50”
0404-0039 35.50”
0404-0040 37.50”
0404-0041 39.50”
All part numbers in BOLD MAGENTA are new for 2009.
SUG.
RETAIL
$187.95
191.95
196.95
200.95
206.95
210.95
214.95
218.95
222.95
SECTION
17
FORK SPRINGS
0405-0070
•High-quality, high-performance replacement fork springs eliminate
front end sag, reduce nose dive under braking, improve cornering stability, increase ride comfort
and allow forks to utilize full travel
•Each comes with a full two-year warranty
•Made in the U.S.A.; sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
DS-222040 For 83-87 FXRT; 82-87 FXR, FXRS; 85-86 FXRD; 71-86 FX, FXE, FXS, FXSB;
52-87 XL, XR (35mm)
$91.95
11-1525
For 02-09 VRSCA/B/D, 06-09 FXD
91.95
DS-222057 For 87-93 FXRS-SP; 88-93 FXRT; 91-05 Dyna Glide (not FXDWG, FXD, FXDX) (39mm)
91.95
0405-0064 For 04-09 XL
91.95
DS-222056 For 87-94 FXLR; 88-94 FXR, FXRS; 88-03 XL (39mm) (not 92-03 Hugger)
91.95
DS-222045 For 95-05 FXD, 92-03 XL Hugger (39mm)
91.95
DS-222048 For 84-09 FXST, FXSTD, FLST, FLSTF, 93-05 FXDWG; 80-01 FLT/FLHT/FLTR,
06-09 FLHT/FLHX/FLTR, 94-09 FLHR; 80-86 FXWG; 48-84 FL (41mm)
91.95
0405-0070 For 02-05 FLHT, FLTR (fairing models)
91.95
FORK
TUNING KITS
WINDSHIELDS
TOURING
LUGGAGE
DS-222048
SEATS &
SISSY BARS
EXHAUST
DS-221549
•Adjustable dual-rate
fork springs provide
a soft initial ride and then crossover
to a firmer, higher rate for potholes
and other large bumps
•Each set consists of a long spring, a short spring, pre-load spacer material (in most cases),
separating washers and three different metal spacers that determine the crossover from
soft to firm
•Changing the metal spacers allows for differences in rider weight, style, conditions
and personal preferences
•The perfect complement to Works Performance rear shocks
0405-0176
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
V-ROD
BIG TWIN MODELS (CONT)
0405-0178
02-09 VRSCA/B/D
$159.95 0405-0176
84-01 FLT, FLHT, FLTR, 06-09 FLHT, FLHX, FLTR,
94-09 FLHR (41mm Wide Glide)
BIG TWIN MODELS
06-09 FXD (49mm)
DS-221549
00-07 FXSTD (41mm Wide Glide)
129.95 0405-0179
93-05 FXDWG (41mm Wide Glide)
DS-221549
84-09 FLST/C, FXST/C (41mm Wide Glide)
129.95 DS-221549
0405-0177
91-92 FXD, 93-05 FXDL (39mm Wide Glide)
FUEL/AIR
SYSTEMS
ENGINE
SUG. RETAIL
$129.95
159.95
129.95
129.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
FORK SPRINGS
•Accuracy and performance
•Accurate rates within 2%
•Chrome silicon, high stiffness-to-mass ratio,
shot-peened, heat-treated and preset
•Choose from varying spring rates to suit your riding needs
PART #
SPRING RATE (KG PER MM)
SUG. RETAIL
84-09 FLST/FXST, 93-05 FXDWG, 80-86 FXWG, 80-01 FLT/FLHT,
94-09 FLHR, 06-09 FLHT, FLTR, FLHX, 79-85 XL1000 (41MM)
FRSPS-323480
.80kg/mm
$109.95
FRSPS-323485
.85kg/mm
109.95
FRSPS-323490
.90kg/mm
109.95
FRSPS-323495
.95kg/mm
109.95
FRSPS323410
1.00kg/mm
109.95
93-05 FXD, 94-05 FXDS, 99-05 FXDX, 87-94 FXR/FXLR/FXRSP,
88-03 XL1200/C/S, 88-03 XL883/C/HUGGER (39MM)
FRSPS293880
.80kg/mm
109.95
FRSPS293885
.85kg/mm
109.95
FRSPS293890
.90kg/mm
109.95
06-09 FXDL (49MM)
0405-0259
W/ .6-1.1 kg/mm progressive spring
109.95
99 BUELL X1, 99-01 S3T THUNDERBOLT
FRSP-S362785
.85 kg/mm
109.95
FRSP-S362790
.90 kg/mm
109.95
FRSP-S362795
.95 kg/mm
109.95
0416-0011
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
PART #
SPRING RATE (KG PER MM)
97-02 BUELL M2 CYCLONE
FRSP-S373285
.85 kg/mm
FRSP-S373290
.90 kg/mm
FRSP-S373295
.95 kg/mm
FRSP-S373210
1.0 kg/mm
96-98 BUELL S1 LIGHTNING, 95-96 S2 THUNDERBOLT,
00-01 S3 THUNDERBOLT AND 97-98 THUNDERBOLT
FRSP-S353480
.80 kg/mm
FRSP-S353485
.85 kg/mm
FRSP-S353490
.90 kg/mm
FRSP-S353495
.95 kg/mm
SUG. RETAIL
$109.95
109.95
109.95
109.95
109.95
109.95
109.95
109.95
FLEKS3580
0416-0013
COMPLETE FRONT END SUSPENSION KITS
•Race Tech complete front-end suspension kits improve comfort and performance of damping rod forks
•More than just fork lowering kits, these come with Race Tech Gold Valve cartridge fork emulators and high-performance springs
•Also include hardware to lower bike 1” or 2”
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
84-09 FLST, FXST, 93-05 FXDWG, 80-86 FXWG, 80-01 FLT, FLHT, FLTR,
93-05 FXD, 94-98 FXDS, 87-94, 99 FXR, FXLR, FXRSP, 88-03 XL1200/C,
94-09 FLHR, 06-09 FLHT, FLTR, FLHX (41MM FORKS)
88-03 XL 883/C/HUGGER, 04-09 XL (39MM FORKS)
FLEKS3880
W/ .80 kg/mm spring
$259.95 FLEKS3580
W/ .80 kg/mm spring
$259.95
FLEKS3885
W/ .85 kg/mm spring
259.95 FLEKS3585
W/ .85 kg/mm spring
259.95
FLEKS3890
W/ .90 kg/mm spring
259.95 FLEKS3590
W/ .90 kg/mm spring
259.95
02-05 FLT, FLHT, FLTR
02-09 VRSCA/B/D, 06-09 FXDL (49MM FORKS)
1
0416-0011
W/ .6-1.1 kg/mm progressive spring
259.95
W/ .95 kg/mm spring
279.95 0416-0013
1 Includes Gold Valve assembly for cartridge leg and Gold Valve Emulator for damping leg.
All part numbers in BOLD MAGENTA are new for 2009.
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
981
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
FORK LOWERING KITS
•For riders who want the quality of a Race Tech fork lowering kit, but don’t need the added
performance of Gold Valve emulators
0416-0012
•High-performance springs included, along with all hardware necessary to lower bike 1” or 2”
•Better comfort and performance than stock
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
84-09 FLST, FXST, 93-05 FXDWG, 80-86 FXWG,
93-05 FXD, 94-98 FXDS, 87-94, 99 FXR, FXLR, FXRSP, 88-03 XL1200/C,
80-01, 06-09 FLT, FLHT, FLHX, FLTR, 94-09 FLHR (41MM FORKS)
88-03 XL 883/C/HUGGER, 04-09 XL (39MM FORKS)
FLNES3880
W/ .80 kg/mm spring
$119.95 FLNES3580
W/ .80 kg/mm spring
$119.95
FLNES3885
W/ .85 kg/mm spring
119.95 FLNES3585
W/ .85 kg/mm spring
119.95
FLNES3890
W/ .90 kg/mm spring
119.95 FLNES3590
W/ .90 kg/mm spring
119.95
02-05 FLT, FLHT, FLTR
02-09 VRSCA/B/D, 06-09 FXDL (49MM FORKS)
0416-0012
W/ .95 kg/mm spring
109.95 0416-0014
W/ .6-1.1 kg/mm progressive spring
109.95
PS-01559
EXHAUST
FORK LOWERING KIT
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
•Lowering kit utilizes Progressive
Suspension’s experience and knowledge
to provide exact
model applications
•Progressively wound for more comfort
and control over a variety
of road surfaces
•Lowers forks up to 2”
•Kit comes complete with springs,
spacers and installation instructions
DROP-IN FRONT
FORK LOWERING SYSTEM
0416-0034
•Transforms a time-consuming installation process
into an easy 30-minute job
•Lowers front end of your bike up to 2” without
disassembling the forks
•Entire procedure can be accomplished with basic tools
PART #
10-1565
PS-01561
DESCRIPTION
SUG. RETAIL
For 02-09 VRSCA/B/D (lowers 1”)
$117.95
For 80-01, 06-09 FLHT, FLT, FLHR, FLTR; 78-86 FL, FLH;
80-86 FXWG; 84-09 FXST, FLST; 93-05 FXDWG (41mm)
117.95
PS-01560 For 87-94 FXLR; 88-94 FXR, FXRS;
87-94 FXR-SP/CONV.; 88-92 FXRT; 91-92 FXDB/C;
93-99 FXDL (except FXDX); 94-00 FXDS-CONV;
88-09 XL (except 1200S) (39mm)
117.95
PS-01559 For 84-87 Sportster; 82-87 FXR, FXRS;
83-87 FXRT and 84-86 FX (35mm)
117.95
0416-0018 For 06-09 FXD
117.95
PART #
0416-0034
0416-0035
0416-0036
0416-0037
DESCRIPTION
SUG. RETAIL
88-09 XL
$129.95
91-05 FXD (except FXDWG)
129.95
06-09 FXD
129.95
84-09 FXST/FLST, 80-09 FLH/FLT
(non-cartridge models)
129.95
0406-0038 02-05 FLHT/FLTR (cartridge equipped fork models)
84.95
DS-221441
LIGHTING
1310-0391
HANDLEBARS,
CONTROLS
& MIRRORS
LOWBOY FORK
LOWERING KITS
•This is how you get
the look most
everybody wants
•Lower the forks up to 2”
•Come with two rebound
springs and two 30.5mm o.d. progressively wound fork springs
plus instructions
•Easy installation
CABLES
PART #
DS-2214401
BRAKES
DS-221441
TANKS &
OIL FILTERS
DS-2214422
DASHES
& GAUGES
1
2
FRAMES,
SUSPENSION
& FENDERS
DESCRIPTION
For 84-09 FXST, 93-05 FXDWG; 86-09 FLST;
80-86 FXWG; 94-09 FLHR; 80-01,
06-09 FLHT/FLTR, FLT (41mm tubes)
For 87-94 FXRS-SP, FXLR; 88-94 FXR, FXRS, FXRT;
91-05 FXD (except FXDX) ; 88-09 XL 1200
(39mm tubes) (except 00 1200S)
For 83-87 FXE, FXEF, FXSB, FXR, FXRS;
83-86 FXRT, FXRD; 84-87 XLH 883, 1000, 1100
(35mm tubes)
SUG. RETAIL
$99.95
99.95
99.95
Lowers FLT/FLHT 1”.
DS-221442 will not fit pre-83 models because they have no top-out spring.
1310-0392
FOOTRESTS
& LICENSE
KITS
PLATE FRAMES SLAMMER
•Complete lowering kit includes shocks
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
982
and fork springs
•Easy to install fork springs that do not require
the removal of forks
•Drop-in fork springs lower front end up to 2”
•Shocks lower rear up to 21/2”
FORK LOWERING KIT
NOTE: Not for 1200S models.
PART #
1310-0391
1310-0392
1310-0469
1310-0470
1310-0471
FITS MODEL
88-03 XL
04-09 XL
91-05 FXD (except FXDWG)
06-09 FXD
08-09 FLH/FLT
SUG. RETAIL
$299.95
299.95
299.95
299.95
299.95
•The quickest and easiest way to lower front
forks by 11/2”
•Comes with two chrome compression springs,
spring spacers and bushings
•Made in the U.S.A.
PART #
DESCRIPTION
DS-221458
89-06 FXSTS models
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$149.95
SECTION
17
DS-222183
WINDSHIELDS
DS-222180
TOURING
LUGGAGE
DS-222182
DS-222184
CUSTOM FORK DAMPERS FOR
LOWERED APPLICATIONS
1304-0165
COMPLETE LOWERING KITS
•Lowers the front and rear using one kit
•Kit includes shortened dampers, rear shock adjusters
and a shortened chrome kickstand
•Uses OEM front springs
NOTE: Ground clearance and tire clearance must be
checked when installing these kits.
PART #
DESCRIPTION
1304-0166 For 07-09 FXST/FLST exc. Springer and Deuce
(lowers FXST front 21/2”, FLST front 2”, back 11/2”)
DS-222180 For 00-06 FXST/FLST exc. Springer and Deuce
(lowers FXST front 21/2”, FLST front 2”, back 11/2”)
1304-0165 For 07-08 FLHT/FLTR
SUG. RETAIL
•Simplify lowering front end of motorcycle
•Dampers are shortened and drilled for a factory quality ride
•Use stock fork springs
•Sold in pairs
PART #
FITMENT
INCHES LOWERED
DS-222182
00-09 FXST
2.5”
00-09 FLST
2.0”
97-01 FLHT, 06-08 FLHT/
FLTR, 97-08 FLHR
1.5”
DS-222183
84-99 FXST
2.5”
86-99 FLST
2.0”
DS-222184
91-05 FXDL
2.75”
94-05 FXDS
2.75”
94-05 FXD
2.0”
97-03 XL
2.0”
SEATS &
SISSY BARS
EXHAUST
SUG. RETAIL
$53.95
FUEL/AIR
SYSTEMS
ENGINE
53.95
TRANSMISSION
& DRIVELINE
53.95
GASKETS
& SEALS
$155.95
155.95
227.95
ELECTRICAL
0416-0026
0416-0027
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
FRONT FORK LOWERING KITS
GOLD VALVE CARTRIDGE FORK EMULATORS
•Everything you need to lower the front end of
your motorcycle
•Kits include all necessary installation hardware
and instructions
•PART #0416-0026 lowers front forks 11/4” - 2” (kit only
lowers FLT/FLHT model front forks 1”)
•PART #0416-0027 lowers front forks 1” - 2”
PART #
DESCRIPTION
0416-0026 For 84-09 FXST, 93-05 FXWG; 86-09 FLST;
80-86 FXDWG; 94-09 FLHR; 80-01/06-09 FLHT, FLT
w/ 41mm forks
0416-0027 For 87-94 FXRS-SP, FXLR; 88-94 FXR, FXRS, FXRT;
91-05 FXD (except FXDX); 88-03 XL 883/1200
(except 00-03 XL1200S) w/ 39mm forks
•Make damping rod forks perform like well-tuned cartridge forks
•Tunable valves sit on top of damping rods; held in place by the
main springs
•Typical road race track tests show an improvement of 2 seconds per lap
•Simple to install and tuneable for all conditions and rider preferences
PART #
DESCRIPTION
SUG. RETAIL
FEGV-S3802 84-09 FLST, FXST, 93-05 FXDWG, 80-86 FXWG,
80-01, 06-09 FLT, FLHT, FLTR, FLHX, 73-01 FLT, FLHT,
FLTR, 94-09 FLHR (41mm forks)
$159.95
FEGV-S3501 93-05 FXD, 94-98 FXDS, 87-94, 99 FXR, FXLR, FXRSP,
88-03 XL1200/C, 88-03 XL 883/C/Hugger
(39mm forks)
169.95
0450-0112
06-09 FXDL (49mm forks)
169.95
159.95
FEGV-S3001 For all 35mm forks
SUG. RETAIL
$99.95
99.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
GOLD VALVE™ FORK KITS
FOR CARTRIDGE FORKS
•The ultimate front end should feel controlled and not dive excessively; firm with a plush ride
•Gold Valve fork kits give that plush-yet-firm ride by improving the flow area in the piston, which transfers
control of the damping to the valving shims
•Include “Fork Maintenance and Gold Valve Installation” video to facilitate installation
PART #
DESCRIPTION
SUG. RETAIL
FMGV-S2043 99-05 FXDX, 99-05 FXDS, 97-03 XL 1200S
$169.95
FMGV-S2043 99 Buell X1, 97-98 and 00-01 M2 Cyclone, 01 S1 Lightning, 00-01 S3 Thunderbolt,
99-01 S3T Thunderbolt
169.95
All part numbers in BOLD MAGENTA are new for 2009.
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
983
SECTION
17
DS-222044
WINDSHIELDS
TOURING
LUGGAGE
FORK DAMPER RODS
•Stock Sportster and FXR forks
lack rebound damping;
Progressive’s replacement damper rods combat the problem
•Combine them with Progressive Suspension fork
springs for a dramatic improvement
•Made in the U.S.A.; sold in pairs
PART #
DESCRIPTION
DS-222052
All 39mm XL (except 92-03 Hugger) and 87-94 FXRT, FXRS-SP,
FXRS-CON (will not fit Dyna Glide); repl. OEM #45925-88
DAMPER TUBES/
TUBE ASSEMBLIES
DS-222043
•Damper tube assemblies meet
or exceed OEM specifications
•Designed to fit many Showa front forks from 75-99
•Sold each; two required to rebuild or assemble a front end
SUG. RETAIL
$122.95
PART #
DESCRIPTION
DS-222044
For 84-99 FXST, 84-86 FXWG, 93-99 FXDWG models;
repl. OEM #45418-84
For 80-83 FXWG models; repl. OEM #45418-80
For 77-84 FL models; repl. OEM #45831-77
DS-222041
DS-222043
SEATS &
SISSY BARS
DS-222041
SUG. RETAIL
$23.95
25.95
25.95
41MM
DAMPER SPRING
•Sold each
EXHAUST
PART #
DESCRIPTION
DS-222186
For 91-02 FXDWG, L77-99 FXST, FXSTC,
FXWG, FL and FLT; repl. OEM #45855-77
FUEL/AIR
SYSTEMS
$5.95
FRONT FORK
DAMPER TUBE
MOUNTING KIT
ENGINE
TRANSMISSION
& DRIVELINE
SUG. RETAIL
•Kit includes two
socket-head bolts and
two copper washers
•Made in the U.S.A.
PART #
DESCRIPTION
DS-222051
For 75-08 Showa front ends; repl. OEM #45405-75A
FRONT FORK DAMPER SET
•Meets or exceeds OEM specifications
•Consists of one each of the following
components to replace OEM #s: lock
nut (OEM #7725);damper tube (OEM
#46100-48);and small gasket (OEM #46111-48)
•Two sets required to rebuild the front end
PART #
DESCRIPTION
DS-222050
For 49-E77 FL and FLH models
DS-222030
•Precision machined
for an exact fit
SUG. RETAIL
DS-222028
DS-222031
$5.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
FRAMES,
SUSPENSION
& FENDERS
NOTE: Bushings and seals
should be replaced whenever the
front forks are disassembled.
DS-222125
DS-222126
PART #
DESCRIPTION
SUG. RETAIL
FOR 84-09 FXST/C, 93-05 FXDWG, 86-09 FLST AND 84-09 FLHT MODELS (41MM)
DS-222030
Fork tube bushings; repl. OEM #45940-84 (.588” wide)
$8.95
DS-222031
Lower fork leg bushings; repl. OEM #45866-84 (.778” wide)
8.95
FOR 91-05 DYNA GLIDE (EXCEPT FXDWG), 87-94 FXR AND 88-09 XL MODELS (39MM)
DS-222028
Fork tube bushings; repl. OEM #45461-87 (.588” wide)
8.95
DS-222029
Lower fork leg bushings; repl. OEM #45465-87 (.778” wide)
8.95
FOR 84-87 FXR AND 84-87 XL MODELS (35 MM)
DS-222125
Fork tube bushings; repl. OEM #45413-84 (.588” wide)
8.95
DS-222126
Lower fork leg bushings; repl. OEM #45416-84 (.588” wide)
8.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
984
For all models w/ Wide Glide
Showa forks from L77-99;
repl. OEM #45834-77 (ea.)
SUG. RETAIL
$8.95
•Revolutionary low-friction
design ensures high-quality
suspension performance
•Constructed of FEP and tin composite, these Teflon (PTFE) coated
bushings have the lowest friction properties available
•Inner bushings mount on the inner (chrome) fork tube and have Teflon
on the outside of the bushing; outer bushings mount on the outer
(aluminum) fork tube and have Teflon on the inside of the bushing
•Sold in pairs
PART #
DESCRIPTION
FOR 99-01 BUELL S3T THUNDERBOLT (41MM)
FMBI41201P
Inner bushing (20mm wide)
FMBO41202P
Outer bushing (20mm wide)
FOR 00-01 BUELL M2 CYCLONE (41MM)
FMBI41201P
Inner bushing (20mm wide)
FMBO41152P
Outer bushing (15mm wide)
FOR 99 BUELL X1 (43MM)
FMBI43201P
Inner bushing (20mm wide)
FMBO43152P
Outer bushing (15mm wide)
SUG. RETAIL
$24.95
22.95
24.95
22.95
19.95
22.95
DS-189814
UPPER FORK
SLIDER BUSHING
•Replacement slider bushings
manufactured for a precise fit
•Sold individually
FORK SLIDER BOTTOM
CAP STUD WITH NUT
•Package of two
NOTE: Must be reamed.
PART #
DESCRIPTION
DS-189814
DS-189815
For 73-07 Showa/Kayaba forks; repl. OEM #45998-73
For 49-77 Big Twins; repl. OEM #45840-48
SUG. RETAIL
$7.95
7.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
DESCRIPTION
DS-222773
SUPER SLICK
FORK BUSHINGS
•Replace OEM bushings
•Sold in pairs
•Made in Japan
TANKS &
OIL FILTERS
DASHES
& GAUGES
PART #
DS-222029
FORK SLIDER
BUSHINGS
LIGHTING
$53.95
FORK LEG
LOWER STOP
GASKETS
& SEALS
ELECTRICAL
SUG. RETAIL
DS-222787
CHROME FORK
TUBE CAPS
DS-222806
DS-222785
SUG.
RETAIL
PART #
DESCRIPTION
DS-222785
Fork tube caps for 73-85 FX; 82-86 FXR, FXRS;
73-E86 XL (fine thread); repl. OEM #45993-73 (pr.)
Upper fork tube caps for 49-77 FL, FLH (will not work with
headlight shroud); repl. OEM #45754-60 (pr.)
Lower fork tube cap for 49-77 FL, FLH;
repl. OEM #45776-49 (ea.)
DS-222787
DS-222806
PART #
DESCRIPTION
FOR 49-77 FL AND FLH
DS-221451
Upper fork bushing; repl. OEM #45824-49
CHROME FORK TUBE
PLUGS AND CAPS
FORWIDE GLIDE FORKS
•Sold in pairs
20.95
$10.95
DS-222775
PART #
DESCRIPTION
DS-222774
Upper fork tube plugs for all 77-99 Showa Wide Glide forks
(except 84 and later FLT, FLHT, FLHS and FL models
w/ adjustable forks); repl. OEM #45838-77
Slider tube caps for all 80-09 FXST/FLST, FXWG, 93-05
Dyna Wide Glide and 4-speed FXWG models (except FXSTS/
FXSTSB models); repl. OEM #45419-80
$19.95
19.95
DS-222774
SUG. RETAIL
DS-222775
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$24.95
17.95
SECTION
WINDSHIELDS
SPIKED
FORK CAPS
•CNC-machined
from billet aluminum
•Sold in pairs
•Made in the U.S.A.
PART #
0409-0012
TOURING
DS-222529
DESCRIPTION
For 80-09 FXWG, FXST/FLST and 93-05 FXDWG
SUG. RETAIL
$99.95
0409-0004
STEM AND FORK
TUBE NUT COVER KITS
LUGGAGE
•Chrome-plated 6061 T-6 billet aluminum
•Kits include a 13/8” stem nut cover and two fork tube nut covers
•Held firmly in place with setscrews
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR MOST 80-09 WIDE GLIDE FRONT ENDS (EXCEPT 06-09 FXDWG)
DS-222529
Elite nut cover kit
$117.95
0409-0004
Gothic nut cover kit
117.95
FORK TUBE CAP COVERS
•Made of polished billet aluminum
•Available in .44 magnum style
•Made in the U.S.A.
PART #
0450-0004
17
DESCRIPTION
For 41mm and 39mm fork tubes
(except 06-09 Dyna Glide, 00-09 FLT)
SEATS &
SISSY BARS
EXHAUST
SUG. RETAIL
FUEL/AIR
SYSTEMS
$90.95
CHROME
BILLET
FORK TUBE
NUT COVERS
41MM FORK
TUBE COVERS
0412-0061
ENGINE
•Chrome 6061 T-6
billet aluminum
•Fit between the upper
and lower triple
trees on raked Accutronix trees
•Made in the U.S.A.; sold in pairs
•Smooth design to
match OEM stem
nut cover
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-222149 For 87-09 fork tube nuts (except 06-09 Dyna Glide)
$49.95
PART #
0412-0061
DS-222154
TRANSMISSION
& DRIVELINE
DESCRIPTION
For 5°/7° raked triple trees, gothic
For straight triple trees, elite
SUG. RETAIL
$94.95
88.95
GASKETS
& SEALS
ELECTRICAL
CUSTOM BILLET FORK BOOTS
•Exclusive slash-cut design gives you
a new, bold look
•Made from 6061 T-6 billet aluminum
and chrome-plated
•41mm boots have internal O-rings to
keep water out
•Attach firmly with included setscrew
•Made in the U.S.A.; sold in pairs
PART #
DS-222821
LIGHTING
0412-0062
BILLET FORK
SLIDER COLLARS
DESCRIPTION
For 84-09 FXST, 93-05 FXDWG and 80-86 FXWG models
SUG.
RETAIL
$99.95
DS-222812
CUSTOM BILLET
FORK BOOTS
•Chrome billet aluminum
fork boots add a touch
of class to the tops of your fork sliders
•Available in two styles to fit
41mm fork sliders
•Attach firmly with a setscrew
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 84-09 FXST/C, 93-05 FXDWG AND 80-86 FXWG
DS-222812
Ball-milled
DS-222813
Smooth
•Cover the stock dust covers on
41mm Wide Glide front ends
•CNC-machined from billet
aluminum and chrome-plated
•Installation requires removal of fork legs
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
0412-0062
Ball-milled
0412-0063
Smooth
HANDLEBARS,
CONTROLS
& MIRRORS
0412-0063
CABLES
SUG. RETAIL
$87.95
87.95
FORK GUARDS
DS-222813
SUG. RETAIL
$66.95
66.95
DS-219995
TANKS &
OIL FILTERS
•Protect fork seals from
road hazards including
bugs, dirt, rocks, etc.
•Neoprene guards are stretchy and durable;
fit nearly all motorcycle forks
•Machine-washable
•Hook-and-loop fasteners for easy installation
•Available in black only
•Sold in pairs
PART #
200
DESCRIPTION
Fork guards
DASHES
& GAUGES
SUG. RETAIL
$17.95
FORK BOOT COVERS
•Aluminum construction with chrome-plated finish
•Sold in pairs
0406-0017
DESCRIPTION
39mm forks on 88-94 FXR, 88-09 XL;
91-05 FXD; repl. OEM #46002-87
49mm forks on 06-09 FXD/FXDWG, 02-09 VRSC
models (billet machined)
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
FORK BOOTS
PART #
DS-219995
BRAKES
SUG. RETAIL
$14.95
39.95
•Keep dirt and dust out of the
DS-240341
fork seals to ensure long fork life
•Black molded rubber fork boots replace worn stock boots;
sold in pairs
PART #
DESCRIPTION
DS-240341 For 84-09 FXST, 93-05 FXDWG and 80-86 FXWG;
repl. OEM #45420-80
DS-240350 For 76-87 FX, XL (Showa); repl. OEM #45404-75
DS-240360 For 48-E77 FL and FLH
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
HARDWARE,
CHEMICALS
& TOOLS
$6.95
5.95
5.95
COVERS,
SECURITY
& GENERAL
985
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
SUPREME LEGEND U.S. SIGNATURE SERIES
FORK BRACES BY CHOPPERHEAD ROAD
•T-6061 aluminum
•Tightens front end for a smoother ride
•Mount to fork tubes
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 39MM NARROW GLIDE
0415-0006
Chrome
0415-0007
Anodized black
0415-0006
0415-0007
SUG. RETAIL
$120.95
125.95
PART #
DESCRIPTION
FOR 41MM WIDE GLIDE
0415-0008
Chrome
0415-0009
Anodized black
CHROME BILLET
ALUMINUM
FORK TRUSSES
LIGHTING
SUG.
RETAIL
$263.95
263.95
263.95
242.95
DESCRIPTION
49mm for 06-09 FXD
49mm for 06-08 FXDWG
41mm FXSTD
41mm Wide Glide (except FXSTD, 07-09 FXSTC)
SUG.
RETAIL
$171.95
TANKS &
OIL FILTERS
•Machined from 6061 T-6 billet aluminum
•Choose from natural satin,
anodized black or chrome finish
•Extremely lightweight, only 14.5 oz.;
excellent rigidity and strength
•Bolts to lower fork legs
•Totally adjustable to compensate
for any manufacturing inconsistencies
in fork assembly
•Stainless steel hardware
DS-222098
DS-222098
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
986
PART #
DESCRIPTION
DS-222098 For all 80-09 FXST, FXWG and 93-05 FXDWG models
except FXSTD (not for use w/ shrouded forks)
0415-0005 For 00-07 FXSTD
0415-0013
SUG.
RETAIL
$149.95
159.95
DS-222119
DS-222120
PART #
DS-222118
DS-222119
DS-222120
DESCRIPTION
Satin
Anodized black
Chrome
SUG. RETAIL
$119.95
124.95
134.95
DS-221908
SUG. RETAIL
DS-221906
$219.95
STEERING DAMPER KITS
CHROMEPLATED
FORK
BRACE
•Seven-position hydraulic steering dampers
•Fully adjustable; allows full-fork movement
from stop-to-stop
•Dampen unwanted fork oscillations (speed wobble)
•Include required mounting hardware and instructions for installation
•Quality hardened
steel construction
•1” billet aluminum spacers
•Fits 21” wheels
PART #
0415-0002
$149.95
129.95
FOR ALL 88-05 FXR, FXD AND 88-09 XL MODELS
WITH 39MM NARROW GLIDE SHOWA FORKS
SONCY ROAD
FORK STABILIZER
•Clean style; adds
rigidity to 41mm forks
•Billet aluminum with a polished finish
•Bolts to the fork tubes
PART #
DESCRIPTION
For FXST, FXSTD, FXDWG
0415-0001
and FXWG models
SUG. RETAIL
DS-222118
CUSTOM
BILLET
39MM FORK BRACES
0415-0005
•High-quality, chrome-plated, die-cast
aluminum fork braces
•Clamps to the lower fork leg below the dust cap
•Total adjustability prevents binding that may
occur with one-piece fork braces
0415-0012
PART #
DESCRIPTION
FOR 84-09 FXST/FLST W/ 21” WHEELS (EXCEPT FXSTD, FXCW, FXCWC)
0415-0012
Chrome
0415-0013
Black
FORK BRACES
BRAKES
DS-222707
SUG.
DESCRIPTION
RETAIL
39mm Wide Glide conversion kit (9 7/8” center-to-center) $242.95
39mm mid glide
242.95
39mm narrow glide
242.95
35mm narrow glide
242.95
•Designed to replace front
fender on FXST/FLST models
•Practically eliminates front fork flex
•For use with 21” front wheel
•Stamped RSD logo copper badge
riveted to top
•Chrome hardware included; made in the U.S.A.
PART #
DESCRIPTION
2406-8002 For FXWG, FXST, FXDWG and FXSTD models
HANDLEBARS,
CONTROLS
& MIRRORS
PART #
2406-8001
DS-222706
DS-222707
DS-222708
DS-222706
TRACKER FRONT
FORK BRACES
•As in the good old days with
extended front tubes, the need
for a tweek bar is here again
•Vast improvement over the tweek
bars used back in the 60s and 70s
•Feature lightening holes with a compound
arc for added strength and great looks
•Bolts directly to the fork tubes
•Made in the U.S.A.
CABLES
$130.95
135.95
DS-222705
•Manufactured from
a solid piece of 6061
T-6 aluminum, then
chrome-plated
0415-0003
•Designed with
2406-8001
a compound arch
for greater torsional stiffness, which means not only less deflection and twisting but more fender clearance
•Bolts to lower fork legs, which enables the use of dust covers, no need to disassemble the front fork
•Made in the U.S.A. by Custom Cycle Engineering
PART #
0415-0003
0415-0004
DS-222709
DS-222705
SUG. RETAIL
DS-222709
GLIDE TWEEK BAR
ELECTRICAL
$125.95
130.95
PART #
DESCRIPTION
FOR 49MM WIDE GLIDE
0415-0010
Chrome
0415-0011
Anodized black
0415-0004
TRANSMISSION
& DRIVELINE 41MM CHROME WIDE
GASKETS
& SEALS
SUG. RETAIL
DESCRIPTION
For 41mm Wide Glide w/ horizontal
mounting holes on fork legs
SUG. RETAIL
$225.95
PART #
DS-221906
DS-221907
DS-221908
DS-221909
DS-221910
DESCRIPTION
For 00-09 FXST models
For 86-99 FXST models
For L88-03 XL models (w/ 39mm forks)
For 91-05 FXD
For 93-05 FXDWG models
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$224.95
224.95
224.95
224.95
249.95
SECTION
17
WINDSHIELDS
TOURING
1311-0091
LUGGAGE
LEGEND XL1 AIR SUSPENSION SYSTEMS
•Exclusive Kevlar® air spring technology
•Best ride quality; no bottoming-out under any weight or road condition
•Deflective disc dampening offers a smooth ride and eliminates annoying pogo
•CNC-machined from 6061 T-6 and 2011 aluminum
•Suspension system installs in stock location; no modifications necessary
•NEW color-coded plug-and-play wiring for quick and easy installation
•Systems include rider-friendly black handlebar switch for easy “on the go”
adjustability, on-board air compressor, solenoid valve and necessary hardware
•Performance and quality proven under extensive testing since 1998
•Optional chrome handlebar mount switch assembly available separately (PART #0616-0039)
•Made in the U.S.A.
PART #
FOR 04-09 XL MODELS
1311-0091
DESCRIPTION
SUG. RETAIL
Black
$1.599.95
SEATS &
SISSY BARS
EXHAUST
1311-0092
PART #
DESCRIPTION
FOR 04-09 XL MODELS (CONT)
1311-0092
Chrome
SUG. RETAIL
$1.599.95
FUEL/AIR
SYSTEMS
ENGINE
1311-0070
2404-1001
TRANSMISSION
& DRIVELINE
1311-0075
GASKETS
& SEALS
ELECTRICAL
1311-0076
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
L1/D1/V1 AIR SUSPENSION SYSTEMS
•Best ride quality; no bottoming-out under any weight or road condition
•Exclusive Kevlar® air spring technology
•Deflective disc dampening offers a smooth ride and eliminates
annoying pogo
•Suspension system installs in stock location; no modifications necessary
•CNC-machined from 6061 T-6 and 2011 aluminum
•NEW color-coded plug-and-play wiring for quick and easy installation
•Systems include rider-friendly black handlebar switch, on-board air
compressor, solenoid valve and necessary hardware
•Measure 9.75” compressed; 13” extended
•Performance and quality proven under extensive testing since 1998
•FLT and FXD series include black handlebar-mounted control
•Optional chrome handlebar mount switch assembly available separately
(PART #0616-0039)
•Optional fairing mounted gauge and bezel for both FLHT and FLTR
models also available separately
•Made in the U.S.A.
NOTE: Not recommended for FLHX, FLHRS models.
PART #
DESCRIPTION
FOR 99-08 FLT, FLHT, FLHR, FLTR (L1 CT SERIES)
2404-1001
Chrome
1311-0070
Black
FOR 85-98 FLT, FLHT, FLHR, FLTR (L1 CE SERIES)
2404-1000
Chrome
FOR 99-09 FXD MODELS (D1 SERIES)
7807-0027
Chrome
1311-0069
Black
FOR 02-09 VRSCA/B/D V-ROD MODELS (V1 SERIES)
7807-0026
Chrome
1311-0071
Black
SUG. RETAIL
$1,599.95
1,599.95
1,599.95
1,599.95
1,599.95
1,599.95
1,599.95
CABLES
L7 LEGEND AIR SUSPENSION SYSTEM
•Replaces the OEM accessory Low Touring shocks
•Works great in conjunction with the OEM accessory front end
lowering kits
•Exclusive Kevlar® air spring technology
•Best ride quality; no bottoming-out under any weight or road condition
•Deflective disc dampening offers a smooth ride and eliminates
annoying pogo
•CNC-machined from 6061 T-6 and 2011 aluminum
•Suspension system installs in stock location; no modifications necessary
•Systems include rider-friendly black handlebar switch for easy “on the
go” adjustability, on-board air compressor, solenoid valve and
necessary hardware
•Measures 9.5” compressed, 12” extended
•NEW color-coded plug-and-play wiring for quick and easy installation
•Optional chrome handlebar mount switch assembly available separately
(PART #0616-0039)
•Optional fairing mounted gauge and bezel for FLHT and FLTR models also
available separately; see below
•Made in the U.S.A.
NOTE: Does not lower FLHRS, FLHX models.
PART #
DESCRIPTION
FOR 97-08 FLT, FLHT, FLHR, FLHX, FLTR (EXCEPT FLHRSE)
1311-0075
Black
1311-0076
Chrome
FAIRING MOUNTED GAUGE
DESCRIPTION
Fairing mounted gauge
$1,599.95
1,599.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
•Made from 6061 billet aluminum
•Features a black face with chrome bezel
•0-300 PSI dial, fluid filled to prevent needle bounce
•Quick-connect line fitting; air line not included
•Fits into accessory gauge port on FLHT fairings; replaces air temperature gauge on FLTR fairings
PART #
2212-0179
SUG. RETAIL
BRAKES
SUG. RETAIL
$135.00
All part numbers in BOLD MAGENTA are new for 2009.
COVERS,
SECURITY
& GENERAL
987
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
LTR1 LEGEND AIR SUSPENSION SYSTEM
•Best ride quality; no bottoming-out under any weight or road condition
•Exclusive Kevlar® air spring technology
•Deflective disc dampening offers a smooth ride and eliminates annoying pogo
•Suspension system installs in stock location; no modifications necessary
•CNC-machined from 6061 T-6 and 2011 aluminum
•Color-coded plug-and-play wiring for quick and easy installation
•Systems include rider-friendly black handlebar switch, on-board air compressor,
solenoid valve and necessary hardware
•Measures 9.75” compressed; 13” extended
•Performance and quality proven under extensive testing since 1998
•Optional chrome handlebar switch mount assembly available separately
•Optional fairing mounted gauge and bezel for FLHT and FLTR models also available separately
•Made in the U.S.A.
SUG.
PART #
DESCRIPTION
RETAIL
1311-0077 For 99-07 Lehman Touring Trikes $1,599.95
ENGINE
1311-0046
TRANSMISSION
& DRIVELINE
1311-0064
GASKETS
& SEALS
1311-0063
ELECTRICAL
1311-0068
LIGHTING
1311-0047
HANDLEBARS,
CONTROLS
& MIRRORS
Compact
airspring
design
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
Compact shock
body houses
deflective
disc dampening
for improved
ride handling
LEGEND L3/L9 COMPACT-STYLE
AIR SUSPENSION SYSTEMS
L2 AND L8 AIR SUSPENSION SYSTEMS
•The original has just gotten better; redesigned for a better ride
•Features exclusive Kevlar® Air Spring technology
•Best ride quality; offers no bottoming-out under any load condition
•Hydraulic dampening valved to offer a smooth ride
•CNC-machined 6061 T6 billet aluminum
•Suspension system installs in stock location; no modifications necessary
•Includes new black compressor mount, universal micro toggle switch,
on-board air compressor, solenoid valve and all necessary hardware
•Performance and quality proven under extensive testing
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 00-09 FXST/FLST (L2)
1311-0063
Machined
$1,170.95
1311-0064
Black
1,200.95
1311-0065
Chrome
1,285.95
FOR 89-99 FXST/FLST (L8)
1311-0066
Machined
1,170.95
1311-0067
Black
1,200.95
1311-0068
Chrome
1,285.95
•Exclusive Kevlar® Air Spring technology
•Best ride quality; no bottoming-out under any load condition
•Deflective disc dampening valved for a smooth ride and
eliminates annoying pogo
•CNC machined from 6061 T-6 billet aluminum
•Color-coded plug-and-play wiring for quick and
easy installation
•Installs in stock location; no modifications necessary
•Includes new black compressor mount, on-board air compressor, solenoid
valve and all necessary hardware
•Rider-friendly black handlebar switch for easy “on the go” adjustability
•Performance and quality proven under extensive testing
•Optional chrome handlebar switch assembly available separately
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 00-09 FXST/FLST (L3)
1311-0046
Chrome
1311-0045
Black
FOR 89-99 FXST/FLST (L9)
1311-0048
Chrome
1311-0047
Black
HARDWARE,
CHEMICALS
& TOOLS
CHROME HANDLEBAR MOUNT SWITCH ASSEMBLY
COVERS,
SECURITY
& GENERAL
•Optional 1” handlebar switch assembly updates the blade switch assembly that comes with the shocks
•Works with all Legend suspension systems except the L2 and L8 Softail systems
PART #
DESCRIPTION
0616-0039
Switch assembly
988
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$1,799.95
1,599.95
1,799.95
1,599.95
SUG. RETAIL
$161.95
SECTION
17
WINDSHIELDS
DRAG SPECIALTIES SHOCK ABSORBERS
•Shock bodies are steel construction with multi-stage
Velocity sensitive hydraulic dampers
•Feature progressive rate springs that provide a softer initial
response, but resist bottoming better than stock springs
•Improved damping rates for a more controlled ride with
no wallowing
•Adjustable spring pre-load
•Chrome-plated covers and springs for style
•Custom lengths available for stock ride height or a lowered,
custom look
•Manufactured to Drag Specialties specifications
by Progressive Suspension
•Sold in pairs
•Made in the U.S.A.
TOURING
LUGGAGE
SEATS &
SISSY BARS
614-1101-001
EXHAUST
NOTE: Lowering the motorcycle will reduce ground and cornering clearance.
NOTE: When installing replacement shocks on 79-03 XL models, it may be necessary to modify or space the chain guard/belt guard to allow proper
shock clearance.
NOTE: Heavy Duty Applications are recommended for bikes that are operated at or near the manufacturer’s maximum load rating over 50% of the time.
To use the 11” shocks on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender
edge (see Figure 1). Trim the fender as shown in Figure 1 inset. Then install one shock with springs removed and compress shock to verify that belt
guard clearance is sufficient.
STANDARD
APPLICATION
91-09 Dyna Glide (except 00-05 FXDX/FXDXT)
80-08 FLT/FLHT/FLTR/FLHR
82-94 FXR
04-09 XL
79-03 XL, 77-78 XLCR, 83-84 XR 1000
11.0”
614-1101-001
1310-0227
1310-0377
1310-0227
11.5”
614-1150-001
614-1150-001
1310-0381
614-1150-001
12.0”
614-1201-001
-
12.5”
614-1250-002
614-1250-001
1310-0385
614-1250-001
13.0”
614-1300-002
614-1300-001
1310-0388
614-1300-001
SUG. RETAIL
$219.95
219.95
219.95
219.95
219.95
HEAVY DUTY
FITS MODEL
91-09 Dyna Glide (except 00-05 FXDX/FXDXT)
80-08 FLT/FLHT/FLTR/FLHR
82-94 FXR
04-09 XL
79-03 XL, 77-78 XLCR, 83-84 XR1000
11”
1310-0380
1310-0378
1310-0379
1310-0378
11.5”
1310-0382
1310-0382
1310-0383
1310-0382
12”
1310-0384
-
12.5”
1310-0386
614-1250-002
1310-0387
614-1250-002
13”
1310-0389
614-1300-002
1310-0390
614-1300-002
SUG. RETAIL
$219.95
219.95
219.95
219.95
219.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
DRAG SPECIALTIES ADJUSTABLE
SHOCKS FOR FXST/FLST
•Shock length can be adjusted to be the same as stock,
or up to 2” lower to achieve just the right look or seat height
•Fully adjustable spring pre-load
•Improved multi-stage, velocity-sensitive internal valving
with hydraulic anti-bottoming for a comfortable, jolt-free ride
•Freon-gas cell used for fade-free shock operation
•Double-walled construction for extra durability
•Available with a chrome finish for a custom look
•Manufactured to Drag Specialties specifications by Progressive Suspension
•Sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
1310-0194
00-09 FXST/FLST models
1310-0195
89-99 FXST/FLST models
1310-0229
84-88 FXST/FLST models
1310-0195
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
1310-0194
SUG. RETAIL
$465.95
565.95
565.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
AIR LOGIC LEVELING
SUSPENSION KIT
•Included electronic sensor automatically controls
the air pressure in the Airide springs to achieve proper
ride height depending on the weight of the rider/riders
and cargo, eliminating over or under inflation of air bags
due to operator error, and the distraction of
adjusting a manual switch while riding
•Features Firestone Airide springs for proper
expansion and strength
•Bilstein gas shocks specifically valved for the FLT models
•On-board air compressor included
•CNC-machined aluminum shock mount and bag mount
•Spherical bearings in top shock mounts
•All necessary hardware, air lines and mounting brackets included
PART #
DESCRIPTION
1310-0376
For 86-08 FLT, FLHT, FLHR and FLTR
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$1,778.95
All part numbers in BOLD MAGENTA are new for 2009.
COVERS,
SECURITY
& GENERAL
989
SECTION
17
WINDSHIELDS
TOURING
1311-0060
LUGGAGE
Shown fully lowered
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
Shown fully raised
AIRTAIL™ I.A.S. SHOCKS
AND COMPRESSOR KIT
•Integrated air and coil shock absorber
•Uses a linear rate coil combined with dual-chamber air shocks
for a smooth ride and ultimate suspension control
•Inertia Active System (I.A.S.) with Inertia Valve technology
separates wheel movement from chassis movement
•One air chamber for bottoming control and adjusting
suspension for the bike’s load
•The second air chamber adjusts ride height
•Shocks come standard with a manual fill system for use
with a hand pump PART #GP-0-100 (sold separately)
•Optional on-board air compressor kit for Dressers gives you
maximum adjustability and on-the-fly suspension control
•Compressor kit fits 80-07 models only, sold separately
•Compressor kit is now compatible with models equipped with
cruise control
•Shock absorbers sold in pairs
•Made in the U.S.A.
PART #
80-09 FLT/FLHT/FLHR/FLTR
1311-0060
80-07 FLT/FLHT/FLHR/FLTR MODELS
1304-0084
HAND PUMP FOR MANUAL FILL
GP-0-100
1304-0084
GP-0-100
DESCRIPTION
SUG. RETAIL
Airtail shocks
$999.95
Airtail compressor kit
734.95
0-100 PSI hand pump
49.95
CABLES
BRAKES
1311-0061
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE AIRTAIL™ I.A.S. SHOCKS
PLATE FRAMES •Integrated air and coil shock absorber
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
990
Shown fully lowered
•Uses a linear rate coil combined with
dual-chamber air shocks for a smooth ride and ultimate suspension control
•Inertia Active System (I.A.S.) with Inertia Valve technology separates wheel movement
from chassis movement
•One air chamber for bottoming control and adjusting suspension for the bike’s load
•The second air chamber adjusts ride height
•Shocks come standard with a manual fill system for use with a hand pump
PART #GP-0-100 (sold separately)
•Shock absorbers sold in pairs
•Made in the U.S.A.
PART #
DESCRIPTION
1311-0061
91-09 Dyna
GP-0-100
0-100 PSI hand pump
All part numbers in BOLD MAGENTA are new for 2009.
Shown fully raised
GP-0-100
SUG. RETAIL
$1,318.95
49.95
SECTION
17
WINDSHIELDS
TOURING
AIR DRAGGER AIR SHOCKS
•Adjustable ride height air shocks
•Air adjustable shock length can lower the bike up to 2”
•Designed to be easily connected to the stock air lines
found on most touring models
•Optional air line kit available for simple installation on
models without OEM air shocks
•Integrated air and coil shock
•Multi-stage velocity sensitive damping
•Connection kit required for 80-96 FLT/FLHT models,
sold separately
•Optional, easy to install compressor sold separately
LUGGAGE
SEATS &
SISSY BARS
1310-0448
1304-0222
EXHAUST
NOTE: Some or all shocks listed have TUV approval. Refer
to most recent TUV certificate for current listing.
PART #
1310-0448
1304-0211
1304-0222
DESCRIPTION
80-09 FLT/FLHT Air Dragger shocks
80-96 FLT/FLHT connection kit
Optional compressor
FUEL/AIR
SYSTEMS
SUG. RETAIL
$499.95
37.95
459.95
ENGINE
722-1002
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
1304-0214
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
AIRTAIL SHOCKS AND COMPRESSOR KIT
•The Airtail system uses one shock similar to the current FXST/FLST shocks while the other uses dual air chambers
•One chamber is for bottoming control – regardless of passenger or solo rider this raises bike to keep from
bottoming when loaded
•Second chamber is filled to lower the bike to desired height; with first chamber still filled there are no worries
about bottoming-out
•Shocks come standard with a manual fill system; optional on-board air compressor gives you maximum adjustability
and on-the-fly suspension control
•Combine this with the on-board compressor and you can adjust every aspect of your shocks with the touch
of a button
•Shock absorbers sold in pairs
•Made in the U.S.A.
CABLES
BRAKES
NOTE: Not for use on FXCW and FXCWC models.
NOTE: It is not recommended that bike be lowered more than 2”.
PART #
DESCRIPTION
SHOCK ABSORBERS FOR FXST/FLST
722-1002
00-09 FXST/FLSTN
722-1001
89-99 FXST/FLST
COMPRESSOR KIT (INCLUDES ON-BOARD COMPRESSOR AND MANUAL CONTROL SWITCH)
1304-0214
07-09 FXST/FLSTN
30-5101
00-06 FXST/FLST
30-5100
89-99 FXST/FLST
SUG. RETAIL
$822.95
822.95
751.95
751.95
751.95
1310-0204
422 SERIES SHOCKS
•Fully adjustable for ride height and spring preload
•Makes tuning the bike’s suspension for the rider and his or her riding style easy
•Shocks feature a show chrome cover
•Pair of progressive-rate coil springs and purpose-designed monotube
dampers provide superior suspension performance
•Dampers feature a nitrogen charge that eliminates internal oil cavitation
and helps create a consistent ride while resisting heat-induced fade
•Shocks can be adjusted up to 2” lower than stock
•Sold in pairs
•Made in the U.S.A.
PART #
1310-0205
1310-0204
DESCRIPTION
00-09 FXST/FLST, 08-09 FXCW
89-99 FXST/FLST
SUG. RETAIL
$499.95
599.95
All part numbers in BOLD MAGENTA are new for 2009.
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
991
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
412 SERIES SHOCKS
•Manufactured from the finest
materials available
•Designed specifically for Harley models
•412 Series steel spring shocks are nitrogen gas-charged with multi-stage automatic valving
and an adjustable spring preload; proven under extensive testing; easily installed; available
in all black or with chromed springs and end caps (shock cartridge is not chrome)
•Available in standard shocks for the average single rider or heavy-duty shocks better fitted
for the touring rider carrying passengers or a body weight of 225 lb. and up
•Shock absorbers carry a one-year limited warranty; shock springs have lifetime warranties
•Optional shock lights available, see page 693
•TUV approved
NOTE: All shocks are measured center-of-eyelet to center-of-eyelet.
SEATS &
SISSY BARS
NOTE: CHR denotes chrome shock part numbers; BLK denotes black shock part numbers.
Black
NOTE: When installing shocks on 79-09 XL models, it may be necessary to modify or space
the chain/belt guard to allow proper clearance.
Shocks with
chrome covers
Chrome
NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering.
EXHAUST
NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide somewhat slower steering.
NOTE: For OEM shock lengths, see Quick Reference Guide in the back of catalog.
NOTE: Some or all shocks listed have TUV approval. Refer to most recent TUV certificate for current listing.
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
HEAVY-DUTY 412 SERIES SHOCKS
APPLICATION
V-ROD
02-09 VRSCA/B/D/W
FLT, FLHT, FLHR, FLTR
06-09 FLT, FLHT, FLHR, FLTR
80-05 FLT, FLHT, FLHR, FLTR
DYNA
91-09 Dyna Glide (except 00-05 FXDX, FXDXT) w/o cover
91-09 Dyna Glide (except 00-05 FXDX, FXDXT) w/ cover
FXR
88-94 FXR models
XL
04-09 XL
79-03 XL, XLCR
LIGHTING
1
COLOR
11.0”
11.5”
12.0”
12.5”
12.6”
13.0”
13.5”
SUG. RETAIL
CHR
BLK
-
-
-
PS412-4054C
PS412-4054B
-
PS412-4055C
-
-
CHR
BLK
CHR
BLK
-
1310-0480
1310-0481
PS4011C
-
1310-0482
1310-0483
PS412-4050C
PS4050B
1310-0484
1310-0485
PS4124019C
PS4124019B
-
1310-0486
1310-0487
PS4020B
PS4021C
-
299.95
299.95
299.95
299.95
CHR
BLK
CHR
PS4045C1
DS-3100441
PS4047C1
-
PS4044C
DS-310068
PS4046C
-
PS4048C
PS4048B
-
-
-
299.95
299.95
358.95
CHR
BLK
PS4022C
PS4022B
PS4011C
-
PS412-4050C
PS4050B
PS4001C
PS4001B
-
PS4002C
PS4002B
PS4003C
PS4003B
299.95
299.95
CHR
BLK
CHR
BLK
1310-0395
1310-0396
PS4022C
PS4022B
1310-0399
1310-0400
PS4011C
-
1310-0403
1310-0404
PS412-4050C
PS4050B
1310-0407
1310-0408
PS4001C
PS4001B
-
PS4002C
PS4002B
PS4003C
PS4003B
299.95
299.95
299.95
299.95
$299.95
299.95
Fender on FXDWG must be modified – see diagram.
STANDARD 412 SERIES SHOCKS
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
APPLICATION
V-ROD
02-09 VRSCA/B/D/W
FLT, FLHT
06-09 FLT, FLHT, FLHR, FLTR
80-05 FLT, FLHT, FLHR, FLTR
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DYNA
91-09 Dyna Glide (except 00-05 FXDX, FXDXT) w/o cover
91-09 Dyna Glide (except 00-05 FXDX, FXDXT) w/ cover
FXR
88-94 FXR models
FX, FL, FLH 4-SPEED
73-86 FX, FL w/o cover
73-86 FX, FL w/ cover
58-72 FL-FLH w/ cover
XL
04-09 XL
79-03 XL, XLCR
73-78 XLH
73-78 XLCH
53-72 Sportster
1
COLOR
11.0”
11.5”
12.0”
12.5”
13.0”
13.5”
14.25”
SUG. RETAIL
CHR
BLK
-
-
PS412-4051C
PS412-4051B
-
-
-
-
$299.95
299.95
CHR
BLK
CHR
BLK
-
1310-0472
1310-0473
DS-310033
DS-310034
1310-0474
1310-0475
PS4049C
PS4049B
1310-0476
1310-0477
-
1310-0478
1310-0479
PS4002C
PS4002B
PS4003C
PS4003B
-
299.95
299.95
299.95
299.95
CHR
BLK
CHR
DS-3100611
DS-3100261
DS-3100281
-
DS-310060
DS-310053
DS-310036
DS-310038
-
-
-
-
299.95
299.95
358.95
CHR
BLK
DS-310093
DS-310092
DS-310033
DS-310034
-
DS-222000
DS-222010
DS-222001
DS-222011
DS-222002
DS-222012
DS-310059
DS-310057
299.95
299.95
CHR
CHR
CHR
DS-222013
-
-
DS-222004
DS-310089
-
-
-
DS-310087
-
299.95
358.95
358.95
CHR
BLK
CHR
BLK
CHR
CHR
CHR
1310-0393
1310-0394
DS-310093
DS-310092
-
1310-0397
1310-0398
DS-310033
DS-310034
-
1310-0401
1310-0402
PS4049C
PS4049B
-
1310-0405
1310-0406
DS-222000
DS-222010
-
DS-222001
DS-222011
-
DS-222002
DS-222012
DS-222009
DS-222009
DS-222009
DS-310059
DS-310057
DS-222003
DS-222003
DS-222003
299.95
299.95
299.95
299.95
299.95
299.95
299.95
Fender on FXDWG must be modified – see diagram.
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
992
To use the 11” or 11.5” 412 shock on FXDWG models, the fender must be modified as follows: When
the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as
shown in Figure 1 inset. After the fender is trimmed, install one shock with springs removed and
compress shock to verify that belt guard clearance is sufficient.
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
Chrome flame
with chrome
springs
17
WINDSHIELDS
TOURING
812 SERIES SHOCKS
•Manufactured from the finest
materials available
•812 Series steel spring shocks are nitrogen
gas-charged with multi-stage automatic
valving and an adjustable spring preload;
proven under extensive testing; easily
installed; available in chromed springs
and end caps
•Available in standard shocks for the
average single rider or heavy-duty shocks
better fitted for the touring rider carrying
passengers or a body weight of 225 lb.
and up
•Styled covers can be turned in any
direction to achieve a unique custom look
•Optional shock lights available,
see page 693
•TUV approved
•Made in the U.S.A.
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
Vintage
Baloney cut
Chrome flame
with black springs
Double cut
FUEL/AIR
SYSTEMS
ENGINE
NOTE: All shocks are measured center of eyelet to center of eyelet.
NOTE: When installing shocks on 79-09 XL models, it may be necessary to modify or space the chain/belt guard to allow proper clearance.
TRANSMISSION
& DRIVELINE
NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering.
NOTE: A shock which is slightly shorter than stock may slightly alter the head angle and provide somewhat slower steering.
NOTE: Some or all shocks listed have TUV approval. Refer to the most recent TUV certificate for current listing.
NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of catalog.
GASKETS
& SEALS
HEAVY-DUTY 812 SERIES SHOCKS
APPLICATION
FLT, FLHT
80-09 FLT, FLHT, FLHR, FLTR
DYNA
91-09 Dyna Glide (except 00-05 FXDX, FXDXT)
XL
04-09 XL
91-03 XL
COVER STYLE
11.0”
11.5”
12.0”
Baloney Cut
Double Cut
Chrome Flame w/ chrome springs
Chrome Flame w/ black springs
-
1310-0210
1310-0220
-
1310-0216
1310-0226
1310-0274
1310-0275
$439.95
439.95
439.95
439.95
Baloney Cut
Double Cut
Chrome Flame w/ chrome springs
Chrome Flame w/ black springs
Vintage
1310-0215
1310-0225
1310-0272
1310-0273
1310-0295
-
1310-0460
1310-0461
1310-0462
1310-0463
1310-0464
439.95
439.95
439.95
439.95
439.95
Baloney Cut
Double Cut
Chrome Flame
Chrome Flame
Baloney Cut
Double Cut
Chrome Flame
Chrome Flame
1310-0465
1310-0466
1310-0467
1310-0468
1310-0451
1310-0452
1310-0453
1310-0454
1310-0429
1310-0428
1310-0430
1310-0431
1310-0210
1310-0220
1310-0266
1310-0267
1310-0433
1310-0432
1310-0434
1310-0435
1310-0216
1310-0226
-
439.95
439.95
439.95
439.95
439.95
439.95
439.95
439.95
w/ chrome springs
w/ black springs
w/ chrome springs
w/ black springs
SUG. RETAIL
STANDARD 812 SERIES SHOCKS
APPLICATION
FLT, FLHT
80-09 FLT, FLHT, FLHR, FLTR
DYNA
91-09 Dyna Glide (except 95-05 FXDX, FXDXT)
FX, FL, FLH 4-SPEED
73-86 FX, FL
XL
04-09 XL
91-03 XL
COVER STYLE
11.0”
11.5”
12.0”
12.5”
Baloney Cut
Double Cut
-
1310-0208
1310-0218
-
-
$439.95
439.95
Baloney Cut
Double Cut
Chrome Flame w/ chrome springs
Chrome Flame w/ black springs
Vintage
1310-0214
1310-0224
1310-0270
1310-0271
1310-0297
-
1310-0455
1310-0456
1310-0457
1310-0458
1310-0459
-
439.95
439.95
439.95
439.95
439.95
Baloney Cut
Double Cut
Chrome Flame w/ chrome springs
Vintage
1310-0212
1310-0222
1310-0276
1310-0296
-
1310-0211
1310-0221
1310-0277
1310-0294
-
439.95
439.95
439.95
439.95
Baloney cut
Double Cut
Chrome Flame
Chrome Flame
Vintage
Baloney Cut
Double Cut
Chrome Flame
Chrome Flame
Vintage
1310-0421
1310-0420
1310-0422
1310-0423
1310-0419
1310-0207
1310-0217
1310-0262
1310-0263
1310-0298
1310-0425
1310-0424
1310-0426
1310-0427
1310-0208
1310-0218
1310-0264
1310-0265
-
-
1310-0437
1310-0436
1310-0438
1310-0439
1310-0209
1310-0219
1310-0268
1310-0269
-
439.95
439.95
439.95
439.95
439.95
439.95
439.95
439.95
439.95
439.95
w/ chrome springs
w/ black springs
w/ chrome springs
w/ black springs
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
993
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
440 IAS SERIES SHOCKS
•High-pressure gas-charged for consistent damping performance
•Patented Inertia Active System (IAS) damping for unsurpassed handling and comfort
•Top mount threaded preload adjuster allows for fine tuning with a simple twist of the cap
•Feature two independent rebound damping circuits
•Available in chrome billet aluminum end caps with chrome springs or black anodized end
caps with powder coated black springs
•Standard shocks are for the average single rider; heavy-duty shocks are better fitted for the
touring rider carrying passengers or a body weight of 225 lb. and up
•Inertia valve determines whether the soft (wheel) circuit or the firm (chassis) circuit is
utilized to optimize both handling and comfort automatically
•All three damping circuits, compression, as well as soft and firm rebound are also
velocity sensitive
•TUV approved
NOTE: CHR = Chrome covers/chrome springs
BLK = Black covers/black springs
FUEL/AIR
SYSTEMS
NOTE: A shock which is slightly longer
than stock may alter the head angle
slightly and provide somewhat
quicker steering.
ENGINE
NOTE: A shock which is slightly shorter
than stock may slightly alter the head
angle and provide somewhat
slower steering.
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
Black
Chrome
To use the 11” or 11.5” 440, 418 shock on FXDWG
models, the fender must be modified as follows:
When the shock is compressed, the belt guard will
hit the fender edge (see Figure 1). Trim the fender as
shown in Figure 1 inset. After the fender is trimmed,
install one shock with springs removed and compress
shock to verify that belt guard clearance is sufficient.
NOTE: Some or all shocks listed have
TUV approval. Refer to the most recent
TUV certificate for current listing
NOTE: For OEM shock lengths, see the
Quick Reference Guide in the back
of catalog.
HEAVY-DUTY 440 SERIES SHOCKS
ELECTRICAL
LIGHTING
APPLICATION
V-ROD
02-09 VRSCA/B/D/W
FLT, FLHT
06-09 FLT, FLHT, FLHR, FLTR
80-05 FLT, FLHT, FLHR, FLTR
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DYNA GLIDE
91-09 FXD, FXDWG models
FXR
82-94 FXR, FXRS, FXRT, FXLR
XL
04-09 XL
BRAKES
79-03 XL, 83-84 XR1000 models
1
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
994
2
COLOR
11.0”
11.5”
12.0”
12.5”
13.0”
13.5”
SUG. RETAIL
CHR
-
-
-
-
1310-0261
-
CHR
BLK
CHR
BLK
-
1310-0506
1310-0507
1310-0306
440-4011B
1310-0508
1310-0509
1310-0315
440-4050B
1310-0307
440-4019B
1310-0308
440-4020B
1310-0257
440-4021B
645.95
590.95
645.95
589.95
CHR
BLK
-
1310-03181, 2
440-4053B1, 2
1310-02581
440-4044B1
1310-03131
440-4048B1
1310-03161
-
1310-03121
-
645.95
589.95
CHR
BLK
1310-0309
440-4022B
1310-0306
440-4011B
1310-0315
440-4050B
1310-0299
440-4001B
1310-0300
440-4002B
1310-0301
-
645.95
589.95
CHR
BLK
CHR
BLK
1310-0442
1310-0443
1310-0309
440-4022B
1310-0446
1310-0447
1310-0306
440-4011B
1310-0315
440-4050B
1310-0299
-
1310-0300
-
1310-0301
-
645.95
589.95
645.95
589.95
$645.95
00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks.
Fender on FXDWG must be modified – see diagram above.
STANDARD 440 SERIES SHOCKS
APPLICATION
V-ROD
02-09 VRSCA/B/D/W
FLT, FLHT
06-09 FLT, FLHT, FLHR, FLTR
80-05 FLT, FLHT, FLHR, FLTR
DYNA GLIDE
91-09 FXD, FXDWG models
FXR
82-94 FXR, FXRS, FXRT, FXLR
FX, FL/FLH 4-SPEED
73-86 FX, FL
XL
04-09 XL
79-03 XL, 83-84 XR1000 models
1
2
COLOR
11.0”
11.5”
12.0”
12.5”
13.0”
13.5”
CHR
BLK
-
-
1310-0259
440-4054B
-
1310-0260
-
-
CHR
BLK
CHR
BLK
-
1310-0502
1310-0503
1310-0303
440-4006B
1310-0504
1310-0505
1310-0314
440-4049B
1310-0299
-
1310-0300
-
1310-0301
-
645.95
590.95
645.95
589.95
CHR
BLK
-
1310-03171, 2
440-4052B1, 2
1310-03101
-
1310-03111
-
-
-
645.95
589.95
CHR
BLK
1310-0302
440-4005B
1310-0303
440-4006B
1310-0314
440-4049B
-
1310-0304
-
1310-0305
-
645.95
589.95
CHR
-
1310-03181
1310-0258
-
-
-
645.95
CHR
BLK
CHR
BLK
1310-0440
1310-0441
1310-0302
440-4005B
1310-0444
1310-0445
1310-0303
440-4006B
1310-0314
440-4049B
-
1310-0304
-
1310-0305
-
645.95
589.95
645.95
589.95
00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95, to install shocks.
Fender on FXDWG must be modified – see diagram above.
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$645.95
589.95
SECTION
Chrome/
polished
Black
17
WINDSHIELDS
430 SERIES SHOCKS
•Get the best in class dampening performance with this highpressure gas mono tube shock
•Gas and oil separated with a divider piston
•Fade-free in any type of conditions
•Features disk valves for quick and consistent damping
•Threaded preload adjuster allows for fine tuning with a simple
twist of the cap
•Can be mounted with the preload adjuster at the top or bottom
•Includes a durable “Nitro-Steel” piston shaft
•Available in a chrome or black finish
NOTE: A shock which is slightly longer than stock may alter the
head angle slightly and provide somewhat quicker steering.
NOTE: A shock which is slightly shorter than stock may alter the
head angle slightly and provide somewhat slower steering.
NOTE: Some or all shocks listed have TUV approval. Refer to the
most recent TUV certificate for current listing.
NOTE: For OEM shock lengths, see the Quick Reference Guide in
the back of catalog.
TOURING
LUGGAGE
To use the 11” or 11.5” 430, 440, 418 shock on
FXDWG models, the fender must be modified
as follows: When the shock is compressed, the
belt guard will hit the fender edge (see Figure
1). Trim the fender as shown in Figure 1 inset.
After the fender is trimmed, install one shock
with springs removed and compress shock to
verify that belt guard clearance is sufficient.
HEAVY-DUTY 430 SERIES SHOCKS
APPLICATION
COLOR
FLT, FLHT
06-09 FLH/FLT (All) CHR
BLK
80-09 FLT, FLHT,
FLHR, FLTR
CHR
BLK
DYNA GLIDE
91-09 Dyna Glide
(except 00-05
FXDX, FXDXT)
CHR
BLK
XL
04-09 XL
CHR
BLK
CHR
91-03 XL
BLK
EXHAUST
STANDARD 430 SERIES SHOCKS
11.0”
11.5”
12.0”
-
1310-0498
1310-0499
1310-0500
1310-0501
$544.95
499.95
-
1310-0282
1310-0283
1310-0290
1310-0291
543.95
494.95
SUG. RETAIL
APPLICATION
FLT, FLHT
06-09 FLH/FLT (All)
80-09 FLT, FLHT, FLHR, FLTR
1310-0288 1310-0289 -
-
543.95
494.95
-
1310-0415
1310-0416
1310-0290
1310-0291
543.95
494.95
543.95
494.95
1310-0413
1310-0414
1310-0282
1310-0283
SEATS &
SISSY BARS
COLOR 11.0”
11.5”
12.0”
12.5”
CHR
BLK
CHR
BLK
1310-0496
1310-0497
1310-0280
1310-0281
-
-
$544.95
499.95
543.95
494.95
1310-0286 1310-0287 -
-
-
543.95
494.95
1310-0278 1310-0279 -
-
1310-0284
1310-0285
543.95
494.95
1310-0292 -
1310-0293 -
543.95
1310-0409
1310-0410
1310-0278
1310-0279
-
543.95
494.95
543.95
494.95
DYNA GLIDE
91-09 Dyna Glide
(except 00-05 FXDX, FXDXT) CHR
BLK
FXR
91-94, 99-00 FXR
CHR
BLK
FX, FL, FLH 4-SPEED
73-86 FX, FL
CHR
XL
04-09 XL
CHR
BLK
CHR
91-03 XL
BLK
-
1310-0411
1310-0412
1310-0280
1310-0281
SUG. RETAIL
1310-0417
1310-0418
1310-0284
1310-0285
418 SERIES SHOCKS
Black
•Aluminum body twin shock
Chrome
•Five-position, externally adjustable rebound
damping range allows you to dial in the ride you want
•Four-position, easily adjusted spring preload cam lets you adjust
for different load and ride characteristics
•Gas charged for fade-free operation
•Available in standard shocks for the average single rider or heavy-duty shocks better fitted for the
touring rider carrying passengers or a body weight of 225 lb. and up
•Velocity-sensitive, multistage internal damping gives a consistent ride and handling over a variety of
road surfaces
•The body is machined from aircraft-quality aluminum, clear anodized for an attractive and durable finish
•Double-walled construction (steel inner wall) for excellent durability
•Chromoly 4130 steel shaft, hard-chromed and precision-ground for strength and durability
•Complete shock assemblies include chrome or black springs
•TUV approved
•Made in the U.S.A.; sold in pairs
1
2
-
12.0”
12.5”
13.0”
-
PS4821C -
$542.95
1310-0492 1310-0494 1310-0493 1310-0495 -
-
542.95
542.95
80-08 FLT/FLHT/
FLHR/FLTR
PS4811C
PS4811B
-
-
542.95
542.95
DYNA GLIDE
91-08 FXD/FXDWG
PS4844C2 PS4844B2 -
-
542.95
542.95
FX/FL/FLH 4-SPEED
73-86 FX/FL
FXR, XL
82-94 FXR, 79-08 XL
PS4814C
PS4814B
PS4816C
PS4816B
542.95
542.95
PS4845C1,
-
PS4811C
PS4811B
PS4814C
PS4814B
2
-
Fender on FXDWG must be modified – see diagram above.
00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361,
SUG. RETAIL $4.95, to install shocks.
1
2
SPRING
COLOR 11.5”
12.0”
CHR
BLK
1310-0488
1310-0489
CHR
BLK
DS-222017
-
CHR
BLK
DS-2220201,
-
CHR
CHR
BLK
13.5”
1310-0490 1310-0491 -
-
-
$542.95
542.95
PS4812C
PS4812B
-
PS4816C PS4816B -
542.95
542.95
PS4836C2
PS4836B2
DS-2220212 -
-
542.95
542.95
PS4839C
PS4813C
-
-
542.95
DS-222017
-
PS4812C
PS4812B
DS-222018 PS4815C DS-222019
-
2
12.5”
SUG.
RETAIL
13.0”
-
Fender on FXDWG must be modified – see diagram above.
00-05 FXDX/FXDXT models require sleeve kit, PART #2404-0361, SUG. RETAIL $4.95,
to install shocks.
All part numbers in BOLD MAGENTA are new for 2009.
LIGHTING
DASHES
& GAUGES
STANDARD 418 SERIES SHOCKS
APPLICATION
FLT/FLHT
06-09 FLH/FLT (All)
ELECTRICAL
TANKS &
OIL FILTERS
NOTE: Some or all shocks listed have TUV approval. Refer to the most recent TUV certificate
for current listing.
APPLICATION
V-ROD
02-08 VRSCA/B/D CHR
FLT/FLHT
06-09 FLH/FLT (All) CHR
BLK
80-08 FLT/FLHT/
FLHR/FLTR
CHR
BLK
DYNA GLIDE
91-08 FXD, FXDWG CHR
BLK
FXR, XL
82-94 FXR,
79-08 XL
CHR
BLK
GASKETS
& SEALS
BRAKES
NOTE: For OEM shock lengths, see the Quick Reference Guide in the back of catalog.
SUG.
RETAIL
TRANSMISSION
& DRIVELINE
CABLES
NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide
somewhat slower steering.
HEAVY-DUTY 418 SERIES SHOCKS
ENGINE
HANDLEBARS,
CONTROLS
& MIRRORS
NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide
somewhat quicker steering.
SPRING
COLOR 11.5”
FUEL/AIR
SYSTEMS
542.95
542.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
995
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
413 SERIES 15” SHOCKS
416 SERIES AIR SHOCKS
•Manufactured from the finest
materials available
•Designed specifically for Harley models
•416 series air shocks have air adjustability
to allow fine tuning for safety and heavy
loads, plus multi-stage automatic valving
adjusts for all conditions; brushed aluminum
with clear anodized finish
•Made in the U.S.A.
•TUV approved
APPLICATION
LENGTH
80-09 FLT, FLHT, FLHS, FLHR, FLTR
13”
82-86 FXR, 79-08 XL models
12.5”
13.5”
1
•Progressive puts its expertise to work for
high-performance applications
•Longer than stock for increased travel and
ground clearance
•Freon-cell gas system for fade resistance
and superior damping characteristics
•Proper rates provide stability
•Sold in pairs
•TUV approved
PART #
DESCRIPTION
DS-310063
79-09 XL
PART #
DS-2220061
DS-222005
DS-222007
SUG. RETAIL
$399.95
399.95
399.95
02-05 FLHR recommended shock is slightly longer than stock. This may
alter the head angle slightly and provide somewhat quicker steering.
ENGINE
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
REPLACEMENT SPRINGS
FOR PROGRESSIVE
SUSPENSION 12- AND
412-SERIES SHOCKS
DS-222014
DS-310030
•Various rates allow fine-tuning
for specific needs
•Choice of highly chromed and black springs
•Sold in pairs
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
SUG. RETAIL
$277.95
12 SERIES 11.5” SHOCKS
WITHOUT SPRINGS
•Gas-charged with fade-free damping
and consistent operation
•Automatic, six-stage damping adjusts
to a variety of conditions
•Special cams allow easy
preload adjustment
•Springs sold separately; available in a
variety of rates; PART #s DS-222014-16
and DS-310030-32 are recommended
•TUV approved
NOTE: All shocks are measured center-of-eyelet to center-of-eyelet.
PART #
DESCRIPTION
SUG. RETAIL
DS-310049 79-03 XL, 82-94 FXR, 80-09 FLT/FLHT/FLHR/FLTR
$202.95
NOTE: These springs must be ordered when ordering 12-series shocks.
However, they can be used as replacements for the 412-series shocks.
PART #
DESCRIPTION
SUG. RETAIL
DS-2220141 70-120 psi chrome springs (std. spring on
chrome 4000 series shocks)
$92.95
DS-3100301 70-120 psi black springs (std. spring on black
4000 series shocks)
76.95
92.95
DS-2220151 95-140 psi chrome springs
DS-3100311 95-140 psi black springs
76.95
DS-2220161 105-150 psi chrome springs
92.95
DS-3100321 105-150 psi black springs
76.95
DS-310035
125-170 psi black springs
76.95
PS-1370C
90-130 psi chrome spring for 11.5” shocks only
92.95
PS-1370B
90-130 psi black spring for 11.5” shocks only
76.95
PS-1375C
115-155 psi chrome springs for 11” and 11.5”
shocks only
92.95
1
These springs will not fit shock PART #s DS-222003, DS-222009 or DS-310087.
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
GOLD VALVE
SHOCK KIT
•Bolt-on shock valving
for riders serious about
suspension performance
•Improve control, traction,
plushness and resistance to bottoming
•Any qualified mechanic can install them
PART #
DESCRIPTION
SMGV-S4001
For 99 X1 models (40mm x 12mm)
FRONT SHOCK
SUG. RETAIL
$169.95
•Chrome replacement shock
for all OEM Springer forks
•Features plush damping with more ride control
•Made in the U.S.A.
PART #
DESCRIPTION
DS-310094
For 88-06 FXSTS and 97-03 FLSTS,
05-07 FLSTSC models
FRAMES,
SUSPENSION
& FENDERS
BIG SHOCK SPRINGS
TIRES,
TUBES &
WHEELS
COVERS,
SECURITY
& GENERAL
996
$199.95
1312-0131
FOOTRESTS
& LICENSE
PLATE FRAMES
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
31 SERIES SPRINGER DAMPER
•Velocity-sensitive damping provides superior
damping performance
•Attractive chrome finish
•Dual-wall construction for extra durability
PART #
DESCRIPTION
DS-311001
97-09 FLSTS, 05-09 FLSTSC,
88-09 FXSTS Springer models
SUG. RETAIL
$184.95
•Ideal for lowered Softails
•Stronger than stock springs;
prevent bottoming out
•Big Red springs are recommended for solo riders; rated for 1200 psi
•Big Blue springs are recommended if occasionally carrying a passenger
or the rider weight is 220-290 lb.; rated for 1300 psi
•Big Gray springs are for lowered machines that often carry
passengers or the rider weight is 300+ lb.; rated for 1400 psi
•Fit OEM and Progressive Suspension shock absorbers
PART #
DESCRIPTION
SUG. RETAIL
FOR 89-07 FXST
1312-0131
Big Red shock springs
$199.95
1312-0132
Big Blue shock springs
199.95
1312-0133
Big Gray shock springs
199.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
17
WINDSHIELDS
DS-310000
SHOCK ABSORBERS
•Feature hard-chrome high-tensile 1/2” steel shafts and billet aluminum
components with computer-calibrated check ball, spring and orifice damping system
•Chromed-steel hydraulic tube with 13/8” damping piston
and billet aluminum end caps
•Select units feature ARS (adjustable-rate suspension), which allows the rider
to increase or decrease the load-carrying capacity of the shocks up to 50%
without changing the pre-load of the springs
•Dresser shocks are available with two load-carrying capacities: 400-lb. and 500-lb. rider and passenger total weight
PART #
DESCRIPTION
FOR 91-09 DYNA
DS-310000 11.6” L single-rate chrome spring
1310-0075 12.6” L dual-rate chrome spring w/ ARS
DS-310002 12.6” L single-rate chrome spring
FOR 94-05 FXD-CONV.
DS-310021 13” L dual-rate chrome spring
FOR 87-94 FXR
DS-310078 12” L single-rate chrome spring
DS-310077 13” L single-rate chrome spring
FOR 94-09 FLT/HT.
DS-310067 12” L dual-rate black spring w/ ARS (400
DS-310076 12” L dual-rate black spring w/ ARS (500
DS-310095 13” L dual-rate black spring w/ ARS (400
DS-310037 13” L dual-rate black spring w/ ARS (500
SUG.
RETAIL
$509.95
699.95
509.95
559.95
509.95
509.95
lb.
lb.
lb.
lb.
total
total
total
total
weight)
weight)
weight)
weight)
539.95
539.95
539.95
539.95
TOURING
LUGGAGE
DS-310000
DS-310067
PART #
DESCRIPTION
FOR 88-09 XL
DS-310023 12.5” L dual-rate chrome spring
FOR 02-08 VRSCA/B/D
1310-0012 12” L dual-rate chrome spring (1.6” lower than stock)
1310-0011 13” L dual-rate chrome spring (stock length)
FOR 04-09 883/1200 XLH
1310-0078 11.00” L single-rate chrome springs (3” lower at seat)
(100-160 lb. rider)
1310-0077 11.75” L single-rate chrome springs (2” lower at seat)
(175-225 lb. rider)
1310-0076 13.25” L dual-rate chrome springs (stock length)
(175-225 lb. rider)
SUG.
RETAIL
SEATS &
SISSY BARS
$559.95
509.95
559.95
509.95
509.95
559.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ADJUSTABLE SHOCKS
•Available in chrome/
polished aluminum finish
or black wrinkle/black
anodized finish
•Feature a large 113/16”
diameter damping piston
•Adjustable, which allows
lowering the bike up to 13/4” DS-310079
•Heavy-duty shocks available
for riders 250+ lb.
DS-310080
•Rebuildable; made in the U.S.A.
ADJUSTABLE
SHOCK ABSORBERS
•High-performance shock
will improve the handling
of your Buell
•Feature chrome body
with remote reservoir
and single-rate spring
•Measure the existing
shock from mounting eye
to mounting eye to
obtain the correct length
replacement shock
DS-310154
PART #
DESCRIPTION
FOR ALL 94-02 BUELL MODELS (175-225-LB. RIDER)
DS-310154
16.5” L w/ adjustable pre-load
DS-310153
16.5” L w/ adjustable pre-load, rebound damping and
compression damping
DS-310157
14.8” L w/ adjustable pre-load
DS-310156
14.8” L w/ adjustable pre-load, rebound damping and
compression damping
SUG.
RETAIL
$699.95
899.95
699.95
899.95
PART #
FOR 00-09 FXST, FLST
DS-310084
1310-0081
DS-310085
1310-0082
FOR 84-99 FXST, FLST
DS-310079
1310-0079
DS-310080
1310-0080
DESCRIPTION
ELECTRICAL
LIGHTING
SUG. RETAIL
Standard, chrome
Heavy-duty, chrome
Standard, black
Heavy-duty, black
$699.95
699.95
589.95
589.95
Standard, chrome
Heavy-duty, chrome
Standard, black
Heavy-duty, black
$699.95
699.95
589.95
589.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
1311-0054
1311-0053
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
FULLY-ADJUSTABLE REAR AIR SHOCKS
•The latest advance in rear air shocks from Works Performance
•Systems come complete with air-spring and damper unit with internal spring, compressor pump, stainless-steel-sheathed hoses, wiring, fittings,
switches and relays
•Fully adjustable over a range of up to 500 lb., down to the lightest rider
•Air feature allows the rider to run the shocks at full length and travel while riding, yet lower the bike for cruising or when parked
•Also designed to “run flat” in an emergency, which means that should an air line failure occur, the bike can still be ridden at a reduced speed, plus
the system deflates slowly to allow the rider time to safely react
•Black housing with polished billet compressor brackets and switch mount
•Adjusts to lower bike 13/4”
•Sold in pairs
PART #
1311-0054
1311-0053
DESCRIPTION
For 00-09 FXST, FLST
For 89-99 FXST, FLST
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$1,499.95
1,499.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
997
SECTION
17
DS-221800
WINDSHIELDS
TOURING
1304-0210
LUGGAGE
DS-305050
SEATS &
SISSY BARS
1304-0149
1304-0168
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
FXST/FLST LOWERING KITS
REAR ADJUSTABLE
LOWERING KITS
•Adjustable from stock height to 2” lower
than stock
•Kits for early 84-88 will only fit Progressive
FXST/FLST shocks
•Kits for late 89-99 FXST/FLST will fit both the
stock shocks and Progressive FXST/FLST shocks
•Gives bike a sleek, low profile
•Lower from 1-2”
•Each kit includes mounting
hardware or is designed to use
factory hardware
•Made in the U.S.A.
NOTE: Check all clearances prior to riding.
TRANSMISSION
& DRIVELINE
PART #
DESCRIPTION
SUG. RETAIL
DS-221800 For 00-09 FXST/FLST
(except 05-09 FLSTN,
07 FXSTD, FXCW,FXCWC)
$61.95
1304-0168 For 89-99 FXST/FLST
92.95
SUG.
PART #
DESCRIPTION
RETAIL
DS-305050 Chrome, all 00-09 FXST/FLST
OEM shocks only (except
05-09 FLSTN, 07 FXSTD,
08-09 FXCW/FXCWC)
$128.95
DS-305046 Chrome, 89-99 OEM and
Progressive shocks
128.95
ADJUSTABLE REAR LOWERING KIT
•Made from 1144 stress-proof steel
•Zinc-plated finish
•Lowers the rear of the motorcycle up to a full
2” lower than stock
•Accepts all factory mounting hardware
PART #
DESCRIPTION
1304-0210 For 86-99 FXST,
FLST models
1304-0149 For 00-09 FXST, FLST
models (except FLSTN/
FXSTD, FXCW, FXCWC)
SUG. RETAIL
$94.95
54.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1304-0076
1304-0075
REAR ADJUSTABLE
LOWERING KITS
•Reduces height as much
as two inches
•Once installed, look and feel of the
bike can be customized to
rider’s preference
•Made in the U.S.A.
PART #
1304-0076
CABLES
DESCRIPTION
For 00-09 FXST, FLST models (except
08-09 FXCW/C, 05-09 FLSTN, 07 FXSTD)
SUG. RETAIL
PART #
1304-0075
DESCRIPTION
For 89-99 FXST, FLST models
SUG. RETAIL
$79.95
$59.95
DS-221901
BRAKES
TANKS &
OIL FILTERS
DS-310075
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
998
DS-221902
SHOCK LOWERING KITS
DS-221900
DS-310083
•Lower the rear of any FXST/FLST
•Available in standard and adjustable height versions
•Standard kits have four machined spacers and a special shock disassembly tool for 84-88 models, two new shock end rods and
six special nylon washers for 89-99 models
•Adjustable kits are fully adjustable without having to remove shock mounting bolts and feature a sealing design to protect the
heim bearings from the elements
•Both come with instructions for easy installation
PART #
DESCRIPTION
STANDARD KITS
DS-221902
00-09 FXST, FLST (1” lower) (except 05-09 FLSTN, 07 FXSTD, 08-09 FXCW, FXCWC)
DS-310075
89-99 FXST, FLST (11/4” lower)
ADJUSTABLE RIDE HEIGHT KITS
DS-221900
00-09 FXST, FLST (0” to 11/4” lower) (except 05-09 FLSTN, 07 FXSTD, 08-09 FXCW, FXCWC); chrome/gold anodized finish
DS-221901
00-09 FXST, FLST (0” to 11/4” lower) (except 05-09 FLSTN, 07 FXSTD, 08-09 FXCW, FXCWC); silver zinc finish
DS-310083
89-99 FXST, FLST (up to 2” lower); chrome finish
DS-310072
89-99 FXST and FLST (up to 2” lower); standard finish
DS-310071
84-88 FXST and FLST (up to 2” lower); standard finish
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$72.95
79.95
109.95
99.95
129.95
99.95
99.95
SECTION
1304-0172
17
WINDSHIELDS
1304-0170
TOURING
LUGGAGE
1304-0206
1304-0207
SEATS &
SISSY BARS
REAR LOWERING KITS
•Gives your bike a sleek,
low profile
1304-0171
•Finished in black or polished to
match factory swingarm
•Available in standard drop style; lowers approximately 1”
•Each kit includes required mounting hardware or is designed
to use factory hardware
•Made in the U.S.A.
LOWERING KITS
NOTE: Check all clearances prior to riding.
NOTE: Not for use on Hugger, 883/1200C, 883L/1200L, 1200N models.
PART #
DESCRIPTION
1304-0221
For 02-09 FLHT/FLHR/FLTR (except FLHRS, FLHRC)
(steel construction) - 1” drop
1304-0207
For 97-01 FLT, FLHT, FLHR, FLTR - 1” drop
1304-0208
For 85-96 FLT, FLHT, FLHR - 1.5” drop (steel construction)
1304-0150
For 95-05 Dyna Glide - 1.5” drop
1304-0151
For 06-09 Dyna Glide - 1” drop
1304-0153
For 05-09 XL - 1” drop
1304-0206
For 00-04 XL - 1” drop
1304-0209
For L89-99 XL - 1” drop
•All kits are CNC-machined from
6061 billet aluminum unless noted in chart
1304-0209
•Black anodized finish
•Come complete with all necessary mounting hardware and instructions
•FXD kits not for use with FXDB, FXDL, FXDS, FXDXT
NOTE: Check all clearances before operating.
NOTE: Not for use on Hugger 883/1200C, 883L/1200L,
1200N models.
PART #
STANDARD
1304-0170
1304-0179
1304-0172
1304-0173
1304-0171
SUG.
DESCRIPTION
RETAIL
DROP
For 91-99 Dyna models (except FXDWG)
$108.95
For 02-08 FLT, FLHT models
169.95
For all V-Rod models (except Screamin’ Eagle) 92.95
For 00-03 XL
102.95
For 89-99 XL
102.95
REAR SHOCK LOWERING BRACKET KIT
$104.95
94.95
94.95
104.95
104.95
104.95
94.95
94.95
Inside view
•Makes the motorcycle much easier to get off the side stand and gives more
rider control over the motorcycle with its lower center of gravity
•Lowers your bike 1” leaving adequate room for stock tire-to-fender clearance;
designed to retain the use of the stock rubber shock boot
•CNC-machined from billet steel with a black finish
•Easy to install in approximately 30 minutes with common tools, and includes instructions and hardware
•Made in the U.S.A.
NOTE: Saddlebag modification necessary for installation on FLHRC models.
PART #
DESCRIPTION
1304-0204
For 02-09 FLHT, FLHR, FLHX, FLTR models
SUG. RETAIL
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
SUG. RETAIL
$132.95
Outside view
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DS-221443
DS-221455
DS-221454
DS-221462
BRAKES
DS-221456
REAR LOWERING KITS
•Kits are available in chrome,
powder-coat black steel and
polished aluminum
•Simple bolt-on installation; comes
with mounting hardware
•Designed for OEM and most aftermarket stock length shocks
•97-08 FLHT models are lowered approximately 1”; 85-96 FLHT, FLT
DS-221447
models are lowered approximately 1.5” using OEM air shocks
(not for FLHX, FLHRCI, FLHRS/SI models)
•91-09 FXD models are lowered approximately 1” (not for FXDB, FXDL, FXDS, FXDXT)
•86-09 XL models are lowered approximately 1”; wheel travel is reduced 1/2” for stock
(not for Hugger and 883 or 1200 Custom Deluxe, 883L, 1200L, 1200N, XL50)
•87-94 FXR models are lowered approximately 2” (not for FXRT, FXRP)
NOTE: Fender-to-belt and tire clearance must be checked along with frame
Saddlebags may require spacing.
PART #
DESCRIPTION
SUG. RETAIL
CHROME
DS-221476
97-01 FLHT/FLHR/FLTR
$124.95
DS-221454
85-96 FLT/FLHT/FLHR
104.95
1304-0103
06-09 FXD
124.95
DS-221456
87-94 FXR
94.95
1304-0111
05-09 XL
119.95
DS-221905
00-03 XL
94.95
DS-221455
L89-99 XL
94.95
BLACK
1304-0091
02-08 FLHT/FLHR/FLTR
119.95
DS-221475
97-01 FLHT/FLHR/FLTR
104.95
DS-221443
85-96 FLT/FLHT/FLHR
104.95
TANKS &
OIL FILTERS
DS-221446
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-221463
and exhaust clearance.
PART #
BLACK (CONT)
1304-0102
DS-221903
DS-221462
DS-221447
1304-0110
DS-221468
DS-221446
POLISHED ALUMINUM
DS-221463
DS-221904
DS-221468
DESCRIPTION
SUG. RETAIL
06-09 FXD
00-01 FXD
91-99 FXD
87-94 FXR
05-09 XL
00-03 XL
L89-99 XL
$119.95
119.95
109.95
79.95
109.95
79.95
79.95
91-99 FXD
00-01 FXD
114.95
124.95
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
999
SECTION
17
WINDSHIELDS
440 RETRO FIT COVER KIT
TOURING
LUGGAGE
SEATS &
SISSY BARS
•Update the look of your 440 series
shocks with this stylish cover kit
•Available in chrome
•Sold in pairs
PART #
DESCRIPTION
1320-0008
Chrome
CHROME SHOCK
TOP CAPS
•For all swingarm
Harleys with stock shocks
•3/8” longer than stock
for a better fit
•Come with polished stainless steel clamps, screws and nuts
•Sold in pairs
PART #
DESCRIPTION
DS-310040 For 71-86 FX and FXWG; 58-64 FL; 65-84 FL and
FLH models w/o saddlebag guards; and 52-78 XL
models; repl. OEM #s 54704-52 and 54705-52
SUG. RETAIL
$124.95
SUG. RETAIL
$22.95
EXHAUST
CHROMED SHOCK TOP
STUD COVERS
PART #
DS-310012
FUEL/AIR
SYSTEMS
DS-310011
DS-310012
DESCRIPTION
For 82-94 FXR except FXRT, 82-90 XL;
repl. OEM #54707-88A (pr.)
For 73-85 FX; 80-86 FXWG; 70-84 FL;
repl. OEM #54704-65 (pr.)
SUG. RETAIL
$11.95
10.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
PS-5028C
PS-5027C
CHROME SHOCK COVER KITS
FOR PROGRESSIVE SHOCKS
•Available for Progressive 412 series shocks on various H-D models
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
PS-5028C Top covers for 11” Progressive shocks (DS-222013) on
73-86 FX, FL, FLH, 80-86 FXWG; and 11” Progressive
shocks (DS-310061) on 91-09 Dyna Glide models
$86.95
PS-5029C Top covers for 12” Progressive shocks (DS-222004) on
73-86 FX, FL, FLH, 80-86 FXWG; and 12” Progressive
shocks (DS-310060) on 91-09 Dyna Glide models
81.95
PS-5027C Top and bottom covers for 11” Progressive shocks
(DS-310092) on 58-72 FLH w/ cover, 73-84 FLH
4-Speed w/o cover, 80-09 FLT, 82-94 FXR, 77-09 XL
and 83-84 XR1000 models
97.95
CABLES
DS-310124
DS-310125
SOFTAIL SHOCK MOUNTING KITS
•PART #DS-310124 includes two chrome shoulder bolts,
four washers and two nylock nuts
•PART #DS-310125 includes four chrome shoulder bolts
and washers
•Made in the U.S.A.
PART #
DESCRIPTION
DS-310124
For 00-09 Softail models
DS-310125
For 84-99 Softail models
SUG. RETAIL
$17.95
21.95
DS-310182
DS-310186
BRAKES
SHOCK STUDS
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
•Zinc-plated studs are
available in upper and
DS-175032
DS-310185
lower styles
•Nylock nuts are cadmium-plated and cup washers are chrome-plated
•Studs are sold separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
UPPER SHOCK STUDS
LOWER SHOCK STUDS (CONT)
DS-310182
For 73-86 Big Twin
$15.95 DS-310179
For 75-78 XL
DS-310181
For 67-72 Big Twin
15.95 DS-310178
For 56-74 XL
DS-310180
For 58-66 Big Twin
15.95 NUTS AND WASHERS
5/8”-18 thin nylock nuts (2-pk.)
DS-310177
For 75-78 XL
15.95 DS-175032
DS-310176
For 56-74 XL
15.95 DS-310186
Cup washers 3/8” i.d. (10-pk.)
LOWER SHOCK STUDS
DS-310187
Cup washers 5/8” i.d. (10-pk.)
DS-310185
For 67-72 Big Twin
15.95 DS-310188
Cup washers 1/2” i.d. (10-pk.)
COVERS,
SECURITY
& GENERAL
1000
$17.95
15.95
2.95
2.95
2.95
2.95
2401-0183
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
POLISHED
STAINLESS
STEEL
SHOCK
BOLT KITS
THIN NYLOCK
SHOCK STUD NUTS
•Zinc-plated, 5/8”-18 thread
•Sold in 2-packs
•Made in the U.S.A.
PART #
DESCRIPTION
DS-175032 5/8”-18 thin nylock nuts
SUG. RETAIL
$2.95
All part numbers in BOLD MAGENTA are new for 2009.
•Polished to a mirror finish
PART #
DESCRIPTION SUG. RETAIL
2401-0182 For 00-09
Softail models
$26.95
2401-0183 For 84-99
Softail models
46.95
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
Thickster
EXHAUST
Uncut
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
Slicer
GASKETS
& SEALS
Wrapper
ELECTRICAL
Swoop
Tude
Level
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TIRE HUGGER SERIES FRONT FENDERS
•Fenders for 16”/17”/18” tires are 6.25” outside/6” inside width and will accommodate up to a 130 series on Softails and a 140 series on Dressers
in a tire-hugging profile
•21” fenders are 5.875” outside/5.625” inside width and will fit the current 120/21 series tires on 3.5” wide rims
•Fenders are thick enough to add rigidity to the front end, yet they can still be cut or shaped for an even more custom appearance
•E-coating and the use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work
•Fenders are predrilled; installation requires use of Klock Werks Tire Hugger Front Fender Mounting Blocks, available separately
•Made in the U.S.A.
FOR 83-09 FLT, FLHT, FLHX, FLHR, FLTR MODELS
PART #
DESCRIPTION
16”/18” FRONT WHEEL
1401-0212
Thickster
1401-0216
Uncut
1401-0220
Slicer
1401-0224
Wrapper
1401-0228
Swoop
1401-0232
Tude
1401-0236
Level
21” FRONT WHEEL
1401-0213
Thickster
1401-0217
Uncut
1401-0221
Slicer
1401-0225
Wrapper
1401-0229
Swoop
1401-0233
Tude
1401-0237
Level
SUG. RETAIL
$249.95
249.95
249.95
249.95
249.95
249.95
249.95
249.95
249.95
249.95
249.95
249.95
249.95
249.95
FOR 84-09 FXST/FLST MODELS (EXCEPT FXSTD AND SPRINGERS)
AND CUSTOM APPLICATIONS
PART #
DESCRIPTION
SUG. RETAIL
16”/18” FRONT WHEELS
1401-0210
Thickster
$249.95
1401-0214
Uncut
249.95
1401-0218
Slicer
249.95
1401-0222
Wrapper
249.95
1401-0226
Swoop
249.95
1401-0230
Tude
249.95
1401-0234
Level
249.95
21” FRONT WHEEL
1401-0211
Thickster
249.95
1401-0215
Uncut
249.95
1401-0219
Slicer
249.95
1401-0223
Wrapper
249.95
1401-0227
Swoop
249.95
1401-0231
Tude
249.95
1401-0235
Level
249.95
All part numbers in BOLD MAGENTA are new for 2009.
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1001
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
WFB BENCHMARK
FRONT FENDERS
•Fenders are predrilled to fit 16” or
18”, or for a very radically Kustom
look, 21” front wheels
•Stamped from 14-gauge U.S. steel,
these 61/2” wide fenders are
E-coated to prevent rust and
corrosion with the lowest paint prep in the industry
•Following true Klock Werks style, the WFB Benchmark fender
adds a clean yet dramatic flow to your stock FL
•The use of precision deep-draw stamping technology ensures
a consistent flawless finish while minimizing body work
•Installation requires use of Klock Blocks front fender mounting
blocks available separately, PART #s 1410-0022 and 1410-0023
•The Benchmark fenders can be paired with the WFB rear fender
to complete the Klock Werks Kustom look
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 83-09 FLT, FLHT, FLHX, FLHR, FLTR MODELS
1401-0196
16”/18” front wheel
$249.95
FUEL/AIR
SYSTEMS
1401-0196
1401-0194
PART #
DESCRIPTION
FOR 83-09 FLT, FLHT, FLHX, FLHR, FLTR MODELS (CONT)
1401-0194
21” front wheel
SUG. RETAIL
$249.95
BENCHMARK FRONT FENDERS
FOR SOFTAILS
1401-0197
•Stamped from 14-gauge U.S. steel, these
61/2” wide fenders are E-coated to prevent
rust and corrosion with the lowest paint
prep in the industry
•Fenders are predrilled to fit 16”/18”, or 21” front wheels
•May also be used in a variety of custom applications
•The use of precision deep-draw stamping technology
ensures a consistent flawless finish while minimizing
body work
•No mounting blocks required
•Made in the U.S.A.
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
PART #
DESCRIPTION
FOR 84-09 FXST/FLST MODELS (EXCEPT FXSTD
AND SPRINGERS) AND CUSTOM APPLICATIONS
1401-0197
16”/18” front wheel
1401-0195
21” front wheel
1401-0195
ELECTRICAL
SUG. RETAIL
$249.95
249.95
1401-0139
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
CUSTOM REPLACEMENT
FRONT FENDERS
•5.5” and 6.5” wide, heavy-gauge
16-gauge steel construction
•Fenders are inspected personally
by a master fender builder to ensure
straightness, consistency and a flawless finish
with an absolute minimum of finishing bodywork
•Comes predrilled for easy installation
•Require spacers
•Handmade in the U.S.A.
NOTE: All measurements are approximate.
PART #
DESCRIPTION
FOR 94-09 FLT, FLHT, FLHR, FLTR MODELS
1401-0243
51/2” W for 21” front wheel
1401-0139
61/2” W for 16” or 18” front wheel
1401-0243
SUG. RETAIL
$224.95
239.95
PART #
DESCRIPTION
FOR 94-09 FLT, FLHT, FLHR, FLTR MODELS (CONT)
1401-0205
61/2” W for 21” front wheel
SUG. RETAIL
$239.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
1401-0170
1401-0171
PLATE FRAMES FRONT FENDERS
7
•Bolts directly to Softail fender mounts (6 /8” wide) with no spacers required
TIRES,
•Predrilled, horizontal bolt patttern
•4.5” fenders fit a 90/90 tire with a 21” wheel
TUBES &
•5.5” fenders fit a 120/70 tire with a 21” wheel; unless noted
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1002
FOR 84-09 FXST/FLST (EXCEPT FXSTD, SPRINGERS)
PART #
DESCRIPTION
4.5” WIDE
1401-0170
Long, flared
1401-0171
Short, flared
1401-0172
Pointed, flared
5.5” WIDE
1401-0173
Long, flared
SUG. RETAIL
$229.95
229.95
229.95
PART #
5.5” WIDE (CONT)
1401-0174
1401-0175
1401-02061
1
For 23” wheel.
229.95
All part numbers in BOLD MAGENTA are new for 2009.
1401-0172
DESCRIPTION
Short, flared
Pointed, flared
Long, flared
SUG. RETAIL
$229.95
229.95
229.95
SECTION
Long O.C.F.
17
WINDSHIELDS
Stubby
TOURING
Long O.C.F.
1401-0244
LUGGAGE
Rambler
SEATS &
SISSY BARS
Gambler
EXHAUST
FUEL/AIR
SYSTEMS
Rambler
1925-0003
ENGINE
Maverick
Stinger
Outlaw
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
Longshot
Cobra
DS-380469
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
CUSTOM FRONT FENDERS
•Heavy-gauge steel construction
•Fenders are inspected personally by a master fender builder
to ensure straightness, consistency and a flawless finish
with an absolute minimum of finishing bodywork
•Comes undrilled (unless noted) so you can position
it to look and work best for your application
•Handmade in the U.S.A.
NOTE: All measurements are approximate.
PART #
DESCRIPTION
SUG. RETAIL
4.5” WIDE FENDERS
1401-0001
Long O.C.F.; 21” wheels
$229.95
4.75” WIDE FENDERS
1925-2757
Rambler; 19” wheels
229.95
1925-2753
Rambler; 21” wheels
229.95
DS-380278 Duster; 19”/21” wheels
229.95
DS-380279 Maverick;
19”/21” wheels
229.95
DS-380334 Gambler;
19/21” wheels
229.95
DS-380041 Outlaw; 19”/21” wheels
229.95
DS-380371 Stinger; 19” wheels
239.95
DS-380474 Stinger; 21” wheels
239.95
DS-380370 Longshot; 19” wheels
239.95
DS-380473 Longshot; 21” wheels
239.95
5.5” WIDE FENDER
1401-0148
Long O.C.F.; 21” wheels;
433/8” L x 133/4” radius
229.95
TANKS &
OIL FILTERS
Cobra
1925-0002
PART #
DESCRIPTION
SUG. RETAIL
5.5” WIDE FENDER (CONT)
1401-0244
Long O.C.F.; 21” wheels;
$224.95
45” L x 141/4” radius
DS-380489 Stubby;
3” x 21” wheels
239.95
DS-380490 Rambler;
3” x 21” wheels
239.95
DS-380491 Gambler;
3” x 21” wheels
239.95
DS-380492 Longshot;
3” x 21” wheels
225.95
6.25” WIDE FENDERS (16” WHEELS)
1401-0155
Long O.C.F.
229.95
1925-2754
Stubby
229.95
1925-2755
Rambler
229.95
229.95
DS-380276 Duster, 361/2” L
DS-380333 Gambler, 321/2” L
229.95
DS-380369 Stinger, 323/4” L
239.95
DASHES
& GAUGES
PART #
DESCRIPTION
SUG. RETAIL
6.25” WIDE FENDERS (16” WHEELS) (CONT)
1
DS-380372 Longshot, 36 /2” L
$239.95
6.25” WIDE FENDERS (18” WHEELS)
1401-0149
Stubby
229.95
1401-0150
Rambler
229.95
1401-0151
Longshot
229.95
1401-0152
Gambler
229.95
1401-0153
Stinger
229.95
1401-0154
Long O.C.F.
229.95
6.25” WIDE PREDRILLED FENDER FOR FXSTD
1925-0002
Cobra
229.95
1925-0003
Rambler
229.95
6.75” WIDE PREDRILLED FENDER
FOR WIDE GLIDE
DS-380469 Cobra; 21” wheels
228.95
1
All part numbers in BOLD MAGENTA are new for 2009.
Not for use with OEM frames; requires frames
with at least 2” stretch.
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1003
SECTION
17
WINDSHIELDS
DS-393492
TOURING
LUGGAGE
1925-6789
SEATS &
SISSY BARS
DS-393493
EXHAUST
1401-0191
FUEL/AIR
SYSTEMS
ENGINE
FRONT FENDERS
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
•Raw stamped-steel-construction fender maintains a low-tire profile and comes complete with chrome mounts
•Attach with OEM hardware
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
1925-6789
For 00-07 FXSTD (repl. OEM #59876-00)
$59.95 1401-0191
For 93-06 FXSTS; repl. OEM #59176-96A
DS-393492
For 84-08 FXST, 80-86 FXWG models; repl.
DS-393493
For 88-92 FXSTS; repl. OEM #59176-88
OEM #59924-80A
47.95
SUG. RETAIL
$64.95
40.95
STEEL FRONT FENDER
•No rivet, smooth sided
steel construction
•Designed to fit FLSTF front
ends with 16” wheels
•Will also fit FLT/FLHT
models if used in conjunction
with PART # DS-222128
or DS-222129 fender
to fork adapters
PART #
DESCRIPTION
1401-0043
For 90-99 FLSTF models (exc. Springer)
WIDE GLIDE-STYLE
FRONT FENDER
SUG. RETAIL
$122.95
•Custom Wide Glidestyle front fender with
chrome mounting
brackets and raw finish
PART #
DESCRIPTION
DS-393470
For 48-84 FL and FLH models with 19”
or 21” front tires
SUG. RETAIL
$53.95
DS-380038
CABLES
DS-222940
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
XLX-STYLE
FRONT FENDER
•Steel construction with
chromed side braces
PART #
DESCRIPTION
SUG. RETAIL
DS-393482 For 73-85 FX, 82-94 FXR, 91-05 Dyna and 73-09 XL
Narrow Glide front ends w/ 18” or 19” front tires
$47.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1004
DS-380065
FRONT FENDER
•Original-style fender
DS-380031
NOTE: Chrome fender brackets must
be ordered separately.
PART #
DESCRIPTION
SUG. RETAIL
DS-380038 For 73-85 FX, 82-94, 99 FXR, 91-05 FXD and 73-09 XL
models; may be used on FXST and FXWG models
by using fender mounting kit PART #DS-222940;
repl. OEM # 59007-73B
$61.95
DS-380031 Mount brackets for fender (pr.)
24.95
DS-222940 Fender mounting kit for use on 84-09 FXST,
93-05 FXDWG and 80-86 FXWG
15.95
DS-380066
QUICKBOB® STEEL FRONT FENDERS
•Yesterday’s style and Drag Specialties quality steel construction combine
to create a nostalgic look
NOTE: Will fit 78-06 FL, FLHT and FLT models with minor modifications to
supplied spacers.
PART #
DESCRIPTION
SUG. RETAIL
DS-380065
7” Quickbob fender for 49-77 FL and FLH w/
16” front rim and tire (comes with spacers)
$156.95
DS-380066
61/2” Quickbob fender for 80-86 FXWG,
84-09 FXST and 93-05 FXDWG
175.95
REPLACEMENT
FRONT FENDER
•Designed specifically
as an OEM replacement
NOTE: Also fits FLT and FLHT
models when additional trim
holes are drilled.
PART #
DESCRIPTION
DS-393488
For 54-84 FL models; repl. OEM #s 59000-58,
59000-81, 59100-82 and 59101-79A
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$104.95
SECTION
17
WINDSHIELDS
TOURING
1401-0027
LUGGAGE
SEATS &
SISSY BARS
CONVERSION CUT FRONT FENDERS
•As one of the most desired custom modifications, a clean lowered look
for your bike is now available
•Match JNC internal-strut rear fenders
PART #
DESCRIPTION
SUG. RETAIL
1401-0027
6” wide for a 18” wheel
$399.95
1401-0028
6” wide for a 16” wheel
399.95
EXHAUST
FUEL/AIR
SYSTEMS
CANADIAN FRONT FENDER
•Designed by McKay’s Cycle Creations
•High-strength composite glass construction is lighter and stronger
than fiberglass
•Perfectly straight sidewalls
PART #
DESCRIPTION
SUG. RETAIL
8638
For Wide Glide front ends w/ 16” wheels
$216.95
1401-0254
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
THICKY FRONT FENDERS
•Premium 12-gauge steel construction, raw finish
•Heavy sidewalls for full-tire coverage
•Added surface area allows for more elaborate custom
paint designs
•Requires custom mounting and a fender mount spacer kit,
sold separately
PART #
1401-0254
1401-0255
DESCRIPTION
For 16”/18” wheels, 4.75” wide
For 21” wheel, 4.75” wide
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
SUG. RETAIL
$299.95
299.95
1401-0038
CABLES
DEI 21” FRONT FENDER
•Radically-shaped fender is a great
way to upgrade the look of your ride
•12-gauge steel construction, raw finish
•Designed to fit 21” tires
•Measures approximately 4.75” wide
•Requires custom mounting
PART #
1401-0253
DESCRIPTION
DEI fender for 21” wheels
BRAKES
SUG. RETAIL
$299.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1401-0040
1401-0147
FRONT FENDER BLANKS
1401-0145
•180° fender blanks are made from a high quality 13-gauge steel
•Designed to wrap around your tire with the best fit possible while still
providing the proper clearance
•Available with a radius crown
•Blank allows you to use your imagination freely and create a cut to your
personal satisfaction
CUSTOM FRONT FENDER BLANKS
PART #
1401-0169
1401-0038
1401-0039
1401-0040
NOTE: All measurements
PART #
1401-0145
1401-0146
1401-0147
DESCRIPTION
5.25” wide, 28.4” diam. for 120/70-21 tires
6” wide, 26.28” diam. for 16” wheel
6” wide, 26.38” diam. for 18” wheel
43/16” wide, 28.4” diam. for 21” wheel
SUG. RETAIL
$269.95
269.95
269.95
269.95
1401-0146
TIRES,
TUBES &
WHEELS
•Heavy-gauge steel construction
•Sized large enough to cut out your own style
•Comes undrilled so you can position it to look
and work best for your application
•Handmade in the U.S.A.
are approximate.
DESCRIPTION
4.5” W
5.5” W
6.5” W
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$182.95
182.95
182.95
COVERS,
SECURITY
& GENERAL
1005
SECTION
17
1401-0209
WINDSHIELDS
1401-0245
TOURING
LUGGAGE
21” FRONT FENDERS
•Composite and fiberglass construction
•Lightweight yet durable
•Fit tires with a 21” wheel
SEATS &
SISSY BARS
PART #
DESCRIPTION
FOR FLHT/FLHR MODELS
1401-0209
Fits 120/70 tire
1401-0245
Fits 90/90 tire
EXHAUST
SUG. RETAIL
$222.95
214.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRONTDRAGGER FENDERS
•Very popular fiberglass fender design that
matches the Taildragger fenders
•Available for Wide Glide and narrow
glide applications
•Made in the U.S.A.
DS-380256
NOTE: All fenders must be prefitted
before painting.
PART #
FOR USE WITH
DS-380256
DS-380257
DESCRIPTION
16”, 17” OR 18” FRONT WHEELS
63/4” W, for most Wide Glide applications
61/4” W, for FLST applications
SUG. RETAIL
$212.95
212.95
PART #
DESCRIPTION
FOR USE WITH 19” OR 21” FRONT WHEELS
DS-380258
4 3/4” W, for most narrow glide applications
DS-380258
SUG. RETAIL
$161.95
LEGACY
FRONT FENDER
•Dynamic fender
designed to match
Legacy rear fenders
•Measures 61/2” W
•Made in the U.S.A.
CAFE-STYLE
FRONT FENDER
NOTE: For use
with stretched
frames only.
NOTE: Fenders may
vary up to 1/4” W.
PART #
DS-380263
DESCRIPTION
For use w/ any Wide Glide front end
using a 16”, 17” or 18” wheel
FRAMES,
SUSPENSION
& FENDERS
SUG. RETAIL
$186.95
•Created by Arlen Ness
•Sleek design made of
durable ABS plastic
•Easy to install and
ready for primer
and paint
PART #
DS-380048
DESCRIPTION
For most narrow glide-type front ends
SUG. RETAIL
$59.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1006
CUSTOM
FRONT
FENDER
WIDESPORT
FRONT FENDER
•Unique plastic
fender has
distinctive sides
•Easy to install
and ready for
primer and paint
PART #
DS-380047
DESCRIPTION
For most narrow glide-type front forks
SUG. RETAIL
$59.95
•Sleek, ABS plastic
fender is cleaner
looking and lighter
than the Fat
Boy fender
•Made in the U.S.A.
PART #
DESCRIPTION
DS-380037
For Wide Glide using 16” or 18” front wheels
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$84.95
SECTION
17
WINDSHIELDS
TOURING
FAT ROD FRONT FENDER
•Fiberglass construction
•Bagger-style design
•Matching rear fender, (PART #1401-0045)
available separately
PART #
1401-0044
DESCRIPTION
For 02-06 V-Rod
LUGGAGE
SUG. RETAIL
$299.95
1401-0207
SEATS &
SISSY BARS
EXHAUST
1401-0017
8626
FUEL/AIR
SYSTEMS
1925-8639
ENGINE
DS-380090
TRANSMISSION
& DRIVELINE
1401-0130
GASKETS
& SEALS
1401-0015
DS-380091
ELECTRICAL
LIGHTING
DS-380475
HANDLEBARS,
CONTROLS
& MIRRORS
1401-0182
8602S
CABLES
1401-0183
BRAKES
8625
TANKS &
OIL FILTERS
DASHES
& GAUGES
8614
FRAMES,
SUSPENSION
& FENDERS
1401-0208
FRONT FENDERS
•Made from new space-age materials that are lighter
and stronger than fiberglass
•Not predrilled, allows custom positioning
•Prime and paint with minimal prep
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
NARROW GLIDE
1401-0017 Dominator (4.5” W 21”)
$166.95
1401-0098 Dominator Wrap-around (4.5” W 19” 100/90 tire)
166.95
1925-8639 Dominator (51/4” W 18”/19”)
176.95
8626
StreetSweeper (4.5” N.G. 21” wheels 90/90 tire)
260.95
1401-0207 StreetSweeper (4.5” W 18”/19” wheels 100/90 tire)
216.95
DS-380090 Skirted LoBoy (4.5” W 19” wheels 100/90 tire)
153.95
DS-380091 Loboy® (4.5” W 19” wheels 100/90 tire)
153.95
1401-0130 Hugger (4.5” W 19” wheels 100/90 tire)
166.95
WIDE GLIDE
1401-0015 Dominator (7” W 21” wheels 90/90 tire)
166.95
1401-0131
PART #
WIDE GLIDE
1401-0016
DS-380475
1401-0183
8602S
1401-0182
8625
8614
1401-0131
1401-0208
DESCRIPTION
(CONT)
Dominator (7” W 21” wheels 120/70 tire)
Loboy Sweeper (6.5” W 16” wheels)
Loboy Sweeper FL w/ ears (6.5” W 16” wheels)
Loboy Skirted (6.5” W 16” wheels)
Loboy® (6.5” W 16” wheels)
StreetSweeper (6.5” W 16” wheels)
Smooth Sport (6.5” W 16” wheels)
Hugger (6.5” W 16” wheels)
Hugger FL w/ ears (8.5” W 16”/18” wheels)
All part numbers in BOLD MAGENTA are new for 2009.
FOOTRESTS
& LICENSE
PLATE FRAMES
SUG. RETAIL
$166.95
218.95
218.95
166.95
166.95
283.95
153.95
190.95
190.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1007
SECTION
17
WINDSHIELDS
TOURING
FRONT FENDER
ADAPTERS
LUGGAGE
•Chromed aluminum
adapters allow custom
front fender installation
•For RWD 61/2”-wide undrilled front fenders
•1/4” blind hole fender mounts (21/2” on-center)
•5/16” fork leg mounting holes (3” on-center)
•Sold in pairs
•Made in the U.S.A.
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
BILLET FENDER
RELOCATION KIT
•Used to install FLSTF front fender on
FLT front ends without relocating the
installation holes
•Positions front fender to match the sweep of the rear fender
•Machined from billet aluminum and chrome plated
•.517” thick
•Includes all necessary hardware and spacers
PART #
DESCRIPTION
SUG. RETAIL
1925-0001
For 84-99 FLT, FLHT and FLHR models
$158.95
PART #
1410-0011
TRANSMISSION
& DRIVELINE
DS-222128
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
FENDER-TO-FORK ADAPTER FOR 21” WHEEL
•Chromed aluminum adapters allow custom front fender installation
•Designed to work with RWD 51/2” wide undrilled fender
for 3” x 21” wheels
•Measure 1/4” diameter, 21/2” on-center blind hole fender mounts
•5/16” diameter, 3” on-center fork leg mount holes
•Measure 1.250” thick
PART #
1410-0021
DESCRIPTION
For 80-08 FLT models
SUG. RETAIL
$92.95
CABLES
BRAKES
SUG. RETAIL
$92.95
DS-222129
FENDER-TO-FORK
ADAPTERS
GASKETS
& SEALS
ELECTRICAL
DESCRIPTION
For 80-08 FLT models (.886” thick)
•Adapt FLSTF front
fender to any 80-07 FLT
or FLHT style fork using a 16” wheel
•Work with FLSTF fender PART #1401-0043
•Can also be used in many custom applications
•Adapters measure 3 11/16” L x 111/16” W, 3/4” thickness
•Top holes are 5/16” with 23/4” centers, bottom holes are also 5/16”
with 3” centers
•Sold in pairs
PART #
DS-222128
DS-222129
DESCRIPTION
Chrome
Raw
SUG. RETAIL
$74.95
64.95
POLISHED
FENDER ADAPTERS
•Polished billet aluminum
with blind hole design; hides all mounting hardware
•Designed to mount any FXST/FLST (except Springer)
front fender to an FLT- or FLHT-style front fork
•Adapter measures 35/8” L x 15/8” H x 3/4” W
•Made in the U.S.A.
1410-0025
TANKS &
OIL FILTERS
PART #
1410-0002
DESCRIPTION
Fender adapters (pr.)
SUG. RETAIL
$108.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
1410-0026
1410-0018
BILLET FENDER ADAPTERS
FRONT FENDER ADAPTERS
HARDWARE,
CHEMICALS
& TOOLS
•CNC-machined billet aluminum construction
•Relocates stock fender when converting to 21” front wheel
•Available in chrome or black finish
•Holes have 3” centers
•Hidden mounting design
•Sold in pairs
COVERS,
SECURITY
& GENERAL
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-08 FLT, FLHT, FLHR, FLTR AND CUSTOM TOURING MODELS
1410-0025
Chrome
$399.95
1410-0026
Black
399.95
1008
1410-0019
•Chrome billet spacers
•PART #1410-0018 is used when adapting a narrow-glide
fender to a 41mm wide-glide front fork
•PART #1410-0019 is used to adapt a Deuce front fender to
a Wide Glide fork
•Mounting hardware included
•Sold in pairs
•Made in the U.S.A. by Custom Cycle Engineering
PART #
DESCRIPTION
1410-0018
Narrow-glide fender to mid-glide front end
1410-0019
Deuce fender to Wide Glide front end
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$100.95
118.95
SECTION
17
WINDSHIELDS
1410-0028
TOURING
1410-0022
1410-0027
LUGGAGE
SEATS &
SISSY BARS
WFB BENCHMARK
BAGGER FRONT
FENDER BLOCKS
1410-0022
EXHAUST
•Machined from billet aluminum and available in a chrome or raw finish
•Less is more in this minimalist part that provides perfect spacing for your
Road King, Road Glide, Street Glide or Ultra project
•Besides being used with Klock Werks’ Benchmark Front Fenders, they
can be used for a variety of custom applications
•The spacers are 0.750” thick and hole spacing is 3” on center to fit FLT
or FLHT style forks
•Sold in pairs
•Made in the U.S.A.
NOTE: Will not fit Perse front forks.
PART #
DESCRIPTION
FOR 83-09 FLT, FLHT, FLHR, FLTR, FLHX MODELS
1410-0022
Chrome finish
1410-0023
Raw finish
SUG. RETAIL
$79.95
69.95
1410-0039
1410-0031
FUEL/AIR
SYSTEMS
1410-0032
ENGINE
TIRE HUGGER FRONT
FENDER MOUNTING BLOCKS
•Less is more in this minimalist part that provides perfect
spacing for a Tire Hugger Series fender project
•Use with Klock Werks’ front fenders, or they can also be
used for a variety of custom applications
•Machined from billet aluminum and are available in a chrome
or raw finish
•Tire Hugger Series FL spacers measure 5/8” tall by 35/8” long and have 3”
on-center holes; spacers for 21” tires are 1” wide; spacers for 16”/18” tires
are 7/8” wide
•Tire Hugger Series Softail spacers measure 5/8”tall by 3” long and have
33/4” on-center holes; spacers for 21” tires are 3/8” wide; spacers for
16”/18” tires are 1/8” wide
•All are sold in pairs
•Made in the U.S.A.
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
NOTE: Will not fit Perse front forks.
FENDER SPACER KITS
•Billet aluminum construction
1410-0040
•Make installing fenders fast and easy
•Feature Domino styling on one side and smooth styling on the other
for a choice of custom looks
•Spacers are 3.5” L x 1” W; 3” on-center holes
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
FOR 83-09 FLT, FLHT, FLHR, FLTR, FLHX
1410-0039
Satin
$77.95
1410-0040
Black powdercoat
87.95
PART #
DESCRIPTION
FOR 83-09 FLT, FLHT, FLHR, FLTR, FLHX MODELS
1410-0029
16”/18” chrome finish
1410-0030
16”/18” raw finish
1410-0027
21” chrome finish
1410-0028
21” raw finish
SUG. RETAIL
$79.95
69.95
79.95
69.95
PART #
DESCRIPTION
SUG. RETAIL
FOR 84-09 FXST/FLST MODELS (EXCEPT FXSTD AND SPRINGERS)
AND CUSTOM APPLICATIONS
1410-0033
16”/18” chrome finish
$79.95
1410-0034
16”/18” raw finish
69.95
1410-0031
21” chrome finish
79.95
1410-0032
21” raw finish
69.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
1410-0016
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1410-0014
FOOTRESTS
& LICENSE
PLATE FRAMES
FRONT FENDER SPACERS
CHROME FRONT
FENDER SPACER KIT
•For FXSTD models when using a Paul Yaffe
Original front fender
• Includes four spacers, two measuring 1” and
two measuring 13/16”
PART #
DESCRIPTION
1410-0013 For 00-07 FXSTD Deuce
SUG. RETAIL
$99.95
•Billet front fender spacers with brilliant
chrome finish
•Spacers accept 5/16” bolts and have 23/4”
on-center holes
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
$61.95
1410-0014 11/4” W x 4” L x 3/8” T
1410-0015 11/4” W x 4” L x 1/4” T
55.95
1410-0016 3/4” W x 31/2” L x 1” T
61.95
1410-0017 3/4” W x 31/2” L x 3/4” T
55.95
FENDER SPACERS
•Used to mount custom, undrilled narrow
fenders on Deuce front forks (vertical
mounting holes)
•Spacers are 1” thick with holes at 23/4”
on center; accept 5/16” bolts
•Made in the U.S.A.
PART #
1410-0001
All part numbers in BOLD MAGENTA are new for 2009.
DESCRIPTION
Deuce fender
adapters (pr.)
SUG. RETAIL
$108.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1009
SECTION
17
WINDSHIELDS
DS-222846
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
2406-4144
CHROME
FENDER
SPACERS
PART #
MILLED
DS-222846
2406-0984
DS-222847
ELITE
2406-4142
2406-4143
2406-4145
2406-6432
2406-4145
•Billet fender spacers
allow the mounting
of a narrow glide
fender to a Mid Glide
or Wide Glide front
end (except FLT/FLHT)
•Spacers accept 5/16” bolts
•Have 2.750” on-center holes
•Sold in pairs; made in the U.S.A.
CHROME FENDER SPACERS
DESCRIPTION
SUG. RETAIL
41mm Mid Glide (.695”)
41mm Wide Glide (1.00”)
41mm Wide Glide (1.25”)
$107.95
107.95
107.95
41mm Mid Glide (.695”)
41mm Wide Glide (1.00”)
41mm Wide Glide (1.25”)
107.95
107.95
107.95
•Billet fender spacers for mounting a Wide Glide front fender
•Spacers accept 5/16” bolts with 3” on-center holes
•1.25” spacers can be used with custom 21” fenders
•Sold in pairs
•Made in the U.S.A.
PART #
83-09 FLT/FLHT
1410-0036
2406-6432
2406-4144
1410-0037
1410-0038
DESCRIPTION
Elite (.6875”)
Milled (.836”)
Elite (.836”)
Elite (1.25”)
Smooth (1.25”)
ECONOMY
FENDER SPACERS
SLOTTED FRONT
FENDER SPACERS
•Billet 1” fender spacers
allow the mounting of
a narrow glide fender
to a Mid Glide or Wide
Glide 41mm front end
(except FLT/FLHT)
•Accept 5/16”
bolts with 23/4”
on-center holes
•Sold in pairs; made in the U.S.A.
•Chrome-plated, CNC-machined
T-6 aluminum
•Allow easy adapting
of fender to forks
•Spacers accept 5/16”
bolts and have 23/4”
on-center holes
•Made in the U.S.A.
•Sold in pairs
PART #
1410-0012
DESCRIPTION
Economy fender spacer
SUG. RETAIL
$71.95
PART #
7805-7807
SUG. RETAIL
DESCRIPTION
For 41mm Wide-Glide (except FLT/
FLHT); 1.250”
$107.95
107.95
107.95
107.95
73.95
SUG. RETAIL
$72.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FRONT FENDER RIVETS
•Heavy-duty 1/4” x 5/16” stainless steel rivets
•Sold in packs of 25
FOOTRESTS
& LICENSE
PLATE FRAMES FRONT FENDER BRACKETS
•Brackets with rivets; sold in pairs
TIRES,
PART #
DESCRIPTION
TUBES &
DS-380031
For mounting original-style fenders on 73-85 FX, 73-82 XL;
WHEELS
also fits 82-94, 99 FXR, 83-09 XL and 91-05 FXD models
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1010
SUG. RETAIL
$24.95
PART #
DESCRIPTION
DS-380034 For our FX- and XL-style
front fenders, PART #s
DS-380038, DS-380039 and
DS-380041; repl. stock rivets
on 73-85 FX and XL and
82-94 FXRS and FXRT models
SUG.
RETAIL
$16.95
FENDER MOUNT KIT
•Everything needed to mount a stock FX-, FXE- or XL-style front fender onto 73-83 FX models after
the front end has been converted to Wide Glide-style
•Designed for use with our Wide Glide style conversion kits DS-222916
•Spacers measure 11/2” L x 3/4” diameter with 5/16” hole
PART #
DS-222940
DESCRIPTION
For Wide Glide-style front ends
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$15.95
SECTION
17
WINDSHIELDS
TOURING
1401-0246
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
STRETCHED REAR FENDERS
ENGINE
•Available in either 6” stretch for dramatic styling or 2” stretch
for the rider who wants to clean up the back of the bike
•Predrilled to match stock mounting locations and stamped
in 14-gauge US steel
•Finished with an E-coating to prevent rust and corrosion
•Available with or without a stamped license plate recess
TRANSMISSION
& DRIVELINE
NOTE: The 6” Stocker is predrilled to accept Harley-Davidson taillights and turn signals.
PART #
DESCRIPTION
FOR 00-09 FXST/FLST (EXCEPT FXSTD)
1401-0246
6” stretch; french plate pocket
1401-0248
6” stretch; smooth
1401-0250
6” stretch; stocker
SUG. RETAIL
$429.95
389.95
429.95
PART #
DESCRIPTION
FOR 00-09 FXST/FLST (EXCEPT FXSTD) (CONT)
1401-0247
2” stretch; french plate pocket
1401-0249
2” stretch; smooth
SUG. RETAIL
GASKETS
& SEALS
$429.95
389.95
ELECTRICAL
LIGHTING
1401-0251
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
1401-0238
1401-0239
STRETCHED BENCHMARK REAR FENDERS
BUILDERS SERIES STRETCHED REAR FENDERS
•Introducing the Klock Werks Builders Series!
•These fenders are the exact same quality and dimensions as Klock Werks
standard fender but without the mounting holes
•Result yields a smooth finish while minimizing work needed for bodywork
•Stamped with 14-gauge US steel, 71/8” wide and E-Coated to prevent
rust and corrosion
•Available with or without stamped license plate recess
PART #
DESCRIPTION
SUG. RETAIL
FOR 00-09 FXST/FLST (EXCEPT FXSTD)
1401-0251 6” stretch; french plate pocket Builders Series
$429.95
1401-0252 6” stretch; smooth Builders Series
389.95
•Fender is available in either 6” stretch for dynamic styling or 2” stretch
for the rider who wants to clean up the back of their bike
•Predrilled to match stock mounting locations and stamped with
14-gauge steel
•Finished with an E-coating to prevent rust and corrosion
•Available with or without stamped license plate recess
NOTE: The 6” stocker is predrilled to accept Harley-Davidson taillights
and turn signals.
PART #
DESCRIPTION
SUG. RETAIL
FOR 97-08 FLT, FLHT, FLHX, FLHR, FLTR MODELS
1401-0238
2” stretch; frenched license
$449.95
1401-0239
2” stretch; smooth
399.95
All part numbers in BOLD MAGENTA are new for 2009.
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1011
SECTION
17
1401-0193
WINDSHIELDS
TOURING
1401-0192
1401-0193
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
2030-0229
FUEL/AIR
SYSTEMS
2030-0231
ENGINE
WFB BENCHMARK STRETCHED
1401-0201
FENDERS
TRANSMISSION REAR
•Give your Kustom Bagger the dramatic look that Klock
& DRIVELINE
Werks has become known for
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
•Stamped from 14-gauge U.S. steel, these fenders are
E-coated to prevent rust and corrosion with minimal
1401-0202
paint prep required
•The use of precision deep-draw stamping technology ensures a
consistent flawless finish while minimizing body work
•All mounting holes are precut to simplify the installation process
•Fenders fit Rolling Thunder, Daytec, and Chopper Guys 200 tire
Bagger frames and are 8.625” wide and can also be used
in custom applications
•Frenchie frames are billet aluminum in either chrome or raw versions
•Frames are easy to install, include mounting hardware and accept most 4” x 7” license plates
•Frames sold separately
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
FOR 97-08 FLT, FLHT, FLHX, FLHR, FLTR MODELS (7.125” WIDE)
FOR ROLLING THUNDER, DAYTEC, AND CHOPPER GUYS 200 TIRE BAGGER
1401-0192
Fender, smooth style
$389.95 FRAMES (8.625” WIDE)
Fender, smooth style
$389.95
1401-0193
Fender, frenched style
429.95 1401-0201
Fender frenched style
429.95
2030-0229
Frame, chrome lighted
199.95 1401-0202
Frame, chrome lighted
199.95
2030-0231
Frame, chrome
99.95 2030-0246
Frame, chrome
99.95
2030-0230
Frame, raw
59.95 2030-0248
2030-0247
Frame, raw
59.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
VINTAGE REAR FENDER
CONVERSION KITS
1401-0198
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1012
1401-0178
•Add a period-style bobber rear fender to your venerable Softail
•Fender inspired by the Softail conversion Roland Sands Design
created and dubbed El Borracho
•Designed to be used on OEM frames over any rear wide
swingarm kit
•Kits include chrome billet fender struts and steel fender
•200mm fender measures approximately 9” W
•240mm fender measures approximately 10.5” W
•Matching seat kit, gas tank kit and handlebars sold separately
•All mounting hardware included
•Made in the U.S.A.
NOTE: Requires the fender supports to be cut off of stock chassis.
PART #
DESCRIPTION
SUG. RETAIL
FOR 90-07 SOFTAIL W/ 200MM REAR TIRE
1401-0198
Fender kit
$899.95
1401-0200
Fender only
231.95
1411-0014
Fender struts only
828.95
FOR 90-07 SOFTAIL W/ 240MM REAR TIRE
1401-0178
Fender kit
799.95
1401-0199
Fender only
238.95
1411-0013
Fender struts only
659.95
All part numbers in BOLD MAGENTA are new for 2009.
SECTION
17
WINDSHIELDS
Racer
Duster
Cruiser
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
Maverick
Gambler
Longshot
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
Midway
ELECTRICAL
Pro Street
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
2000R
BRAKES
9000R Left side
TANKS &
OIL FILTERS
CUSTOM REAR FENDERS
DASHES
& GAUGES
•Heavy-gauge steel construction; available in seven popular widths
•Swingarm fender features wiring tubes
•Each fender is inspected personally by a master fender builder to ensure straightness,
consistency and a flawless finish with an absolute minimum of finishing bodywork
•Fenders come undrilled so you can position them to look and work best for your application
•Handmade in the U.S.A.
STYLE
FOR SWINGARM FRAMES
Racer
Cruiser
Duster
Maverick
Gambler
Longshot
Midway
Pro Street
FOR RIGID FRAMES
2000R (left-side drive)
2000R-RSD (right-side drive)
9000R (left-side drive)
1
2
3
7.25” WIDE
8.5” WIDE
9” WIDE
10.5” WIDE
11” WIDE
13” WIDE
LENGTH
1401-0242
DS-380327
DS-380328
DS-380332
DS-380357
DS-380470
-
DS-3804683
DS-380329
DS-380331
DS-380358
1401-0003
DS-3804673
DS-380323
DS-380330
DS-380359
1401-0004
7807-00803
-
DS-380620
DS-380619
DS-3806151
DS-3806181
-
-
303/4”
431/2”
451/4”
341/4”
34”
421/2”
375/8”
31”
$393.95
393.95
314.95
299.95
314.95
314.95
324.95
338.95
DS-380624
DS-380625
DS-380621
-
DS-380309
-
1401-01102
-
371/2”
371/2”
371/2”
349.95
384.95
349.95
SUG. RETAIL $359.95.
SUG. RETAIL $368.95.
SUG. RETAIL $394.95.
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1013
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
CUSTOM STRUTLESS
PRO-STREET REAR FENDERS
•Internal strut design eliminates external struts
•Heavy-gauge steel construction ensures strength,
straightness and a flawless finish
•Inspected personally by a master fender builder
•Available without taillight
•For custom applications only (not recommended for OEM frames)
•Made in the U.S.A.
DS-380486
DS-380487
NOTE: Requires welding a mounting plate (included) to the frame before
installing the fender.
PART #
DESCRIPTION
FOR CUSTOM APPLICATIONS
DS-380486
9” wide
SUG. RETAIL
$589.95
1401-0163
PART #
DESCRIPTION
FOR CUSTOM APPLICATIONS (CONT)
DS-380487
11” wide
SUG. RETAIL
$589.95
1401-0134
1401-0136
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
STRUTLESS REAR FENDERS
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
•Internal strut design eliminates external struts
•Heavy-gauge steel construction, 9” wide, ensures strength and a flawless finish
•Available with or without taillight
•Requires the removal of stock framehorns
•Made in the U.S.A.
PART #
DESCRIPTION
FOR 00-05 FXST/FLST
1401-0163
Longshot
1401-0134
Pro Street
1401-0136
Pro Street w/taillight and license plate kit
SUG. RETAIL
$614.95
594.95
954.95
PART #
DESCRIPTION
FOR 86-99 FXST/FLST
1401-0135
Pro Street
SUG. RETAIL
$594.95
1401-0176
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1401-0177
1401-0240
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
OEM-STYLE REAR FENDERS
•Wide stock fenders available with or without a taillight assembly
•Predrilled; no spacers required
•Softail fenders feature flat mounting surface for the electronic panel
•Heavy-gauge steel construction
PART #
DESCRIPTION
SUG. RETAIL
FOR 06-09 FXST MODELS (WITH 200 TIRE)
1401-0176 91/2” W fender only
$338.95
1401-0177 91/2” W fender w/ taillight and license plate kit
649.95
PART #
DESCRIPTION
FOR 97-08 FLT, FLHT, FLHR, FLTR MODELS (WITH 180 TIRE)
1401-0240 81/4” W fender only
SUG. RETAIL
$409.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-380032
DS-380056
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1014
DS-270120
CUSTOM
REAR FENDER
DS-270119
DESCRIPTION
For 80-86 FXWG models; also fits 65-84 FL
for custom application
Chrome taillight/license plate bracket only
REAR FENDER
•Wide Glide-style with a raw steel finish
•Accepts stock fender struts and hardware
•Optional chrome license/taillight bracket, sold separately
•Stock replacement with a raw steel finish
•Optional chrome license/taillight bracket, sold separately
PART #
DS-380056
QUICKBOB®
SUG. RETAIL
$91.95
28.95
PART #
DESCRIPTION
FOR 73-85 FX (EXCEPT FXWG, FXST AND FXR)
DS-380032
Quickbob fender
DS-270120
Chrome taillight/license plate bracket only
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$99.95
45.95
SECTION
17
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
DS-393496
DS-393497
EXHAUST
FAT BOB-STYLE REAR FENDERS
REAR FENDER
•Universal custom fenders with left-hand or right-hand chain cutaway
•Each measures 38” L x 7” W x 51/2” D and has a raw steel finish
PART #
DESCRIPTION
DS-393496
For left-hand chain
DS-393497
For right-hand chain
•Uses stock mounts and has a raw steel finish
•Original-style fender with taillight mounting holes
PART #
DESCRIPTION
DS-380043
For 73-85 FX models
(except FXWG, FXR and FXST)
SUG. RETAIL
$81.95
81.95
FUEL/AIR
SYSTEMS
SUG. RETAIL
$82.95
TRANSMISSION
& DRIVELINE
DS-380067
DS-380058
ENGINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
REAR FENDERS
•Steel construction
•Available in a smooth style with no taillight mount/license plate mount holes or a stock style with
taillight/license plate mount holes
•Fender-mounting holes are drilled for easy installation
•Also fits FXST models if a full fender is desired
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-97 FLST/FLSTC MODELS
DS-380058
Stock-style fender; repl. OEM #59144-87A
$129.95
DS-380067
Smooth-style fender
129.95
DS-380055
REAR FENDER
•An exact steel replacement for the fender
found on 90-95 FLSTF models
PART #
DSECRIPTION
SUG. RETAIL
DS-380068
For 90-95 FLSTF;
repl. OEM #59596-89
$122.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
DS-380057
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
REAR FENDERS
•Steel, one-piece fenders
are reproductions of the ones
found on 4-speed FL
models 80-84
•Available with or without
predrilled taillight mount and
indents for turn
signal mounting
•Can also be used as
a replacement for the early-style
hinged rear fender
DS-380069
(swingarm frames only)
•Replaces OEM #59601-79B
PART #
DESCRIPTION
DS-380055
W/o taillight/turn signal mount (smooth)
DS-380057
W/ taillight/turn signal mount
DS-380069
W/ taillight mount; no indents for turn signal mount
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HINGED REAR FENDER
SUG. RETAIL
$149.95
138.95
149.95
•High quality with a raw steel smooth finish
and no taillight hole
PART #
DESCRIPTION
SUG. RETAIL
DS-393489
For 58-84 FL,
swingarm; repl. OEM
#59604-65A
$144.95
All part numbers in BOLD MAGENTA are new for 2009.
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1015
SECTION
17
WINDSHIELDS
TOURING
DS-380061
LUGGAGE
QUICKBOB®
REAR
FENDER
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
•Unique steel fender converts the look of a stock XL rear fender to an
FXWG-type bobbed rear fender
•Uses XL sissy bar side straps, but it is wider so an 81/4” FX-style sissy bar
back must be used
•Chrome fender struts with hardware, license plate/taillight mount and
your choice of taillight must be ordered separately to
complete installation
REAR FENDER
•Steel construction
•Pre-drilled for easy installation and accepts
the OEM taillight assembly or Drag Specialties
taillight assembly PART #DS-272026
•Direct replacement for stock rear fender
•Measures approximately 71/4” wide
•For 84-96 FXST models; repl. OEM #59914-86A
PART #
DESCRIPTION
DS-380064
For 84-96 FXST models; repl. OEM #59914-86A
SUG. RETAIL
$92.95
NOTE: Components cannot be interchanged with OEM or
aftermarket parts.
PART #
DESCRIPTION
SUG. RETAIL
DS-380061 Quickbob rear fender only for 57-78 XL
$145.95
DS-380062 Quickbob rear fender struts with hardware only
for 57-78 XL (pr.)
141.95
DS-380063 License plate/taillight mount
61.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
1401-0041
DS-393500
LIGHTING
1413-0009
HANDLEBARS,
CONTROLS
& MIRRORS
1401-0042
FAT BOB REAR FENDER
CABLES
BRAKES
•Raw steel finish, 7” wide
•Available pre-drilled for OEM fender struts or undrilled for
custom applications
•Includes taillight/license mount
PART #
DESCRIPTION
1401-0041
OEM pre-drilled for 94-03 XL models
1401-0042
Custom undrilled for 94-03 XL models
6” FLAT REAR FENDER
SUG. RETAIL
$149.95
149.95
•16-gauge, deep-drawn steel with a raw finish
•Each is 41” L x 11/4” D
•Fender bracket sold separately
PART #
DESCRIPTION
SUG. RETAIL
$59.95
DS-393500 6” flat rear fender, bobbed
1413-0009 Chrome fender bracket
17.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1016
DS-380125
STEEL FLAT FENDERS
•Heavy 16-gauge steel construction, 42” long
•Available in 71/2”, 81/2”, 9” and 10” widths
•Made in the U.S.A.
PART #
DESCRIPTION
DS-380125
71/2” wide
DS-380126
81/2” wide
DS-380128
9” wide
1925-2610
10” wide
FAT ROD REAR FENDER
SUG. RETAIL
$59.95
59.95
59.95
59.95
•Fiberglass construction
•Features a recess for Cycle Visions’ Eliminator
taillight assembly (PART #2010-0007), not included
•Matching front fender (PART #1401-0044),
available separately
PART #
DESCRIPTION
1401-0045
For 02-06 VRSCA/B/D
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$359.95
SECTION
17
WINDSHIELDS
TOURING
DS-380250
DS-380252
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
LEGACY™ REAR FENDER
•Dynamic fiberglass fender from Arlen Ness
•Measures approximately 4” longer than the
stock FLSTC fender at the rear and has longer
skirting for a dressy look
•Perfect match to the Legacy™ front fender
PART #DS-380263
•Made in the U.S.A.
•One of the most popular and recognized fiberglass fenders of the ‘90s
•Available in two different widths for custom applications
•Made in the U.S.A.
NOTE: Fenders may vary up to 1/4” in width.
PART #
DS-380262
DESCRIPTION
81/2” W
ENGINE
TRIMMED TAILDRAGGER™REAR FENDERS
SUG. RETAIL
$186.95
NOTE: Fenders may vary up to 1/4”
PART #
DS-380250
DS-380251
DS-380252
in width.
DESCRIPTION
For FXR and Softail, 7” W
For custom applications, 8” W
For custom applications, 81/2” W
TRANSMISSION
& DRIVELINE
SUG. RETAIL
$212.95
212.95
212.95
GASKETS
& SEALS
ELECTRICAL
8611
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DS-380479
DS-380089
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
DS-380476
DS-380483
FRAMES,
SUSPENSION
& FENDERS
1925-8697
FOOTRESTS
& LICENSE
PLATE FRAMES
8620
UNIVERSAL REAR FENDERS
•Made from space-age materials that are lighter and stronger than fiberglass
•Not pre-drilled – you can position them wherever you want
•Glassed-in convoluted tubing makes it simple and easy to wire the taillight
•Ready for primer and paint with minimal preparation
•Made in the U.S.A.
PART #
DS-380479
DS-380482
DS-380089
8611
DS-380476
DS-380478
DESCRIPTION
71/4” Loboy
9” Loboy
71/4” Loboy Classic
81/4” Loboy Classic
71/4” Loboy StreetSweeper
9” Loboy StreetSweeper
SUG. RETAIL
$216.95
229.95
221.95
225.95
268.95
303.95
TIRES,
TUBES &
WHEELS
PART #
DS-380483
DS-380484
8620
8619
1925-8697
DESCRIPTION
81/4” Loboy Fatbob
9” Loboy Fatbob
71/4” StreetSweeper
81/4” Pro Comp Bobbed
9” Dominator Rigid
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$214.95
221.95
367.95
193.95
221.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1017
SECTION
17
1401-0020
1401-0018
WINDSHIELDS
TOURING
1401-0022
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
1401-0023
1401-0181
DS-380481
1401-0179
MODEL-SPECIFIC
CUSTOM
REAR FENDERS
•Made from space-age
materials that are lighter
and stronger than fiberglass
•Not predrilled – you can position them
wherever you want
•Glassed-in convoluted tubing makes it simple
and easy to wire the taillight
•Ready for primer and paint
with minimal preparation
•Made in the U.S.A.
DS-380480
PART #
DESCRIPTION
SUG. RETAIL
FOR 97-05 FLT MODELS
1401-0179
71/4” Loboy Sweeper
$271.95
FOR 00-05 FXST AND 00-09 FLST MODELS (EXCEPT FXSTD, 07-09 FLSTF)
1401-0022
71/4” Loboy Sweeper w/ ECM cutout
271.95
1401-0020
71/4” Loboy Classic w/ ECM cutout
221.95
1401-0018
71/4” StreetSweeper w/ ECM cutout
336.95
1401-0023
71/4” Dominator w/ ECM cutout
183.95
1401-0181
71/4” Hugger
218.95
PART #
DESCRIPTION
FOR 02-05 DYNA MODELS
1401-0093
8” Pro Comp Bobbed
FOR 91-01 DYNA MODELS
DS-380480
63/4” Loboy
FOR 94-03 XL MODELS
DS-380481
63/4” Loboy
SUG. RETAIL
$183.95
221.95
216.95
LIGHTING
1401-0143
HANDLEBARS,
CONTROLS
& MIRRORS
1401-0140
1401-0141
1401-0142
CABLES
BRAKES
TANKS &
OIL FILTERS
CUSTOM REAR FENDER BLANKS
•Heavy-gauge steel construction
•Available in three widths
•Large enough to cut out custom style
•Handmade in the U.S.A.
PART #
FOR SWINGARM FRAMES
1401-0140
1401-0141
1401-0142
1401-0241
1401-0144
DESCRIPTION
SUG. RETAIL
9” wide
11” wide
13” wide; 143/4” radius
13” wide; 16” radius
$269.95
269.95
339.95
319.95
PART #
FOR RIGID FRAMES
1401-0143
1401-0144
DESCRIPTION
11” wide
13” wide
SUG. RETAIL
$294.95
339.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1018
1401-0033
1401-0036
1401-0035
1401-0167
1401-0031
REAR FENDER BLANKS
•180° fender blanks are made from a high-quality 13-gauge steel
•Designed to wrap around your tire with the best fit possible while still providing the proper clearance
•Available with a radius crown or flat top configuration
•Blank allows you to use your imagination freely and create a cut to your personal satisfaction
•Please check tire size before ordering
PART #
1401-0034
1401-0033
1401-0035
1401-0031
1401-0032
DESCRIPTION
9” radius crown 31.5” dia., Softail
9” flat crown 31.5” dia., Softail
9” radius crown 27.5” dia., Rigid
11” radius crown 31.5” dia., Softail
11” radius crown 27.5” dia., Rigid
SUG. RETAIL
$299.95
299.95
299.95
299.95
299.95
PART #
1401-0036
1401-0037
1401-0167
1401-0168
DESCRIPTION
12” radius crown 31.5” dia., Softail
12” radius crown 27.5” dia., Rigid
13” wide, 31.5” dia., Softail
13” wide, 27.5” dia., Rigid
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$299.95
299.95
299.95
299.95
SECTION
POLISHED ALUMINUM
SWINGARM
ROCK GUARDS
WINDSHIELDS
•Available in three widths:
5”, 63/16” and 93/8”
•Measure 12” long
•Fit most aftermarket Softail-style
swingarm frames
•Made in the U.S.A.
REAR FENDER
ROCK GUARD
•Made from high-quality stainless steel
•Available in a polished finish
PART #
DESCRIPTION
DS-240093
For 84-99 FXST/FLST models
SUG. RETAIL
$33.95
PART #
1925-2611
1925-2612
17
TOURING
1925-2611 1925-2612
DESCRIPTION SUG. RETAIL
5” x 12”
$55.95
70.95
63/16” x 12”
PART #
1925-2613
1925-2613
DESCRIPTION SUG. RETAIL
$81.95
93/8” x 12”
LUGGAGE
SEATS &
SISSY BARS
1411-0016
DS-264049
DS-264052
1411-0017
EXHAUST
FUEL/AIR
SYSTEMS
DS-264053
1925-6989
ENGINE
DS-264072
TRANSMISSION
& DRIVELINE
DS-264051
GASKETS
& SEALS
1411-0018
DS-264071
DS-264057
ELECTRICAL
LIGHTING
DS-264055
HANDLEBARS,
CONTROLS
& MIRRORS
REPLACEMENT REAR FENDER STRUTS
•Beautifully chromed rear fender struts; available in
a smooth or stock replacement style; sold in pairs
DS-264056
PART #
DESCRIPTION
STOCK-STYLE FENDER STRUTS
1411-0017
For 00-07 FLSTC/S, 07 FLSTN; repl. OEM #S 59954-03, 59955-03
1411-0016
For 00-05 FXST(except FXSTD), 05-06 FLSTN, 00-06 FLSTF;
repl. OEM #s 59964-03, 59969-03
DS-264049
4-hole for 86-99 FXST/FLST w/o turn signals mounted
to fender struts; repl. OEM #s 59964-86, 59969-86
1411-0019
For 80-86 FXWG; repl. OEM #59961-80, 59960-80
DS-264052
For 72-85 FX; repl. OEM #59928-73, 59686-78
DS-264053
For 58-84 FL; repl. OEM #s 59932-58, 59932-77,
w/o saddlebag mounting holes
1925-6989
For 94-03 XL; repl. OEM #59896-94, 59897-94
DS-264072
For 82-89 XL; repl. OEM #59950-81
DS-264051
For 54-78 XL; repl. OEM #59934-73
CABLES
SUG. RETAIL
$114.95
BRAKES
114.95
114.95
72.95
79.95
79.95
56.95
79.95
79.95
PART #
DESCRIPTION
SMOOTH CUSTOM FENDER STRUTS
1411-0018 For 00-05 FXST/FLST
DS-264071 For 86-99 FXST/FLST
DS-264057 For 80-86 FXWG
DS-264055 For 72-85 FX
DS-264056 For 58-84 FL
SUG. RETAIL
$114.95
109.95
79.95
79.95
79.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-264006
DS-264007
TIRES,
TUBES &
WHEELS
STEEL FENDER STRUTS
•Designed for custom Softail frames without OEM-style strut mounts
•Made from 1/2” thick cold-rolled raw steel with 17/8” offset
•Supplied with bushings for either 3/8” or 1/2” mounting holes
•Available in stock height or 2” lower height
•Made in the U.S.A.
CURVED BILLET FENDER STRUTS
•For Chopper Guys FXST/FLST-style frames
without OEM-style strut mounts
•5/8” solid raw steel; studs and nuts included
PART #
DS-264003
DESCRIPTION
Fat Guy curved billet struts
for 81/2” - 9” fenders
SUG.
RETAIL
$379.95
NOTE: 2” lower fender rails may change seat-to-fender contour.
PART #
DESCRIPTION
FOR 81/2” - 9” FENDERS
DS-264006
Lowered (2”) fender struts
DS-264007
Stock-style fender struts
All part numbers in BOLD MAGENTA are new for 2009.
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$379.95
379.95
COVERS,
SECURITY
& GENERAL
1019
SECTION
17
WINDSHIELDS
1411-0008
1411-0005
TOURING
1411-0015
DS-111205
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
1411-0011
RIGID FENDER SUPPORTS
INTERNAL STRUTS
•Simplifies fabrication of internal strut fenders
•Pre-bent raw steel construction
PART #
FOR 84-06 SOFTAIL FRAMES
1411-0008
1411-0009
FOR 00-07 FXSTD FRAMES
1411-0005
1411-0006
FOR LOWLIFE FRAMES
1411-0011
1411-0012
DESCRIPTION
(EXCEPT FXSTD)
9” struts
11” struts
SUG. RETAIL
$261.95
233.95
9” struts
11” struts
261.95
231.95
12.5” struts
13” struts
253.95
253.95
DESCRIPTION
Rigid fender supports (pr.)
Bones Rigid fender struts (pr.)
SUG. RETAIL
$122.95
132.95
•Comes complete with chrome
bolts, nuts and acorns
•Used for mounting fender
rails to Chopper Guys
Softail-style frames
•Kit includes six 1/2”13 x 1” button-head bolts
and six A/N washers
PART #
DS-190890
DESCRIPTION
Button-head fender rail kit
SUG. RETAIL
$16.95
REAR MOUNTING
FENDER BUNGS
•Machined from
1018 steel
•Easily mount rear fender
where you want it
•Universal fit
•Weld-on steel mounting boss so fender can be mounted to them
•Measures 3/4” diameter, 3/8-16 thread, 11/2” length with 1” of thread
•Set of three
•Made in the U.S.A.
PART #
1410-0035
PART #
DS-111205
1411-0015
FENDER RAIL
MOUNTING KIT
BUTTON-HEAD
FENDER RAIL
BOLT KIT
PART #
DS-189800
•For Chopper Guys 250mm Rigid frames
and other custom applications
•Bolt-on style with fender mounting holes
•Made in the U.S.A.
DESCRIPTION
Rear-mounting fender bungs
DESCRIPTION
58-85 FX/XL, 54-78 XL
CUSTOM
FENDER STRUT
MOUNTING KIT
•Pasties kit for
mounting
fender to struts
•Includes chrome
socket head bolts,
special nuts, flat washers, wrench
and Pasties, 6061
billet aluminum chrome covers
•Made in the U.S.A. by
Custom Cycle Engineering
PART #
DS-190935
SUG. RETAIL
$39.95
SUG. RETAIL
$16.95
DESCRIPTION
For 84-99 FXST models
SUG. RETAIL
$65.95
1405-0103
1405-0104
CHROME LOWER FRONT
FENDER TRIM
FENDER TIP ACCENTS
•Perfectly matches the contour
of the OEM front fenders
•Highly polished and chrome plated
•Includes mounting hardware
PART #
DS-380094
DESCRIPTION
For 87-09 FLT and FLHT; repl. the satin-finished
aluminum OEM trim #s 59233-76, 59231-86
SUG. RETAIL
$24.95
•Chrome complement to the clean fender
look on the Touring models
•Quick, simple installation with
double-sided adhesive
•Sold each
NOTE: Not for use on models with existing fender trim.
PART #
DESCRIPTION
SUG. RETAIL
FOR FLHR, FLHX, FLTR, FLHRSE AND FLHTCUSE (EXCEPT 07 FLHRSE)
1405-0103
Rear fender accent (except 09 models)
$29.95
1405-0104
Front fender accent (leading edge)
29.95
FRAMES,
SUSPENSION
& FENDERS
1412-0001
1412-0004
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1020
1405-0094
1405-0101
1405-0102
INNER FENDER ACCENT
FENDER TIPS
•Stamped steel insert is chrome-plated
•Covers up the plain black
inner fender/splash guard
•Installs easily with double-sided adhesive
•Sold each or in pairs depending on application, see chart
•Great way to cover dinged fender ends
•Easy installation: requires no drilling or tools
•Fit most OEM fenders
PART #
1405-0094
1405-0101
1405-0102
DESCRIPTION
For 00-05 FXST, 00-06 FLST
(except 04 FXSTDSE, FLSTFSE) (pr.)
For 07 FXSTD, FLSTN, FLSTC, FXSTS (ea.)
For 08-09 FXST/FLST models
NOTE: Tip for narrow tire fender will not fit “full
coverage” or skirted fenders.
SUG. RETAIL
$99.95
49.95
119.95
PART #
1412-0001
1412-0002
1412-0003
1412-0004
DESCRIPTION
Narrow tire front fender (leading edge)
FLSTF front fender (leading edge)
FLSTF front fender (trailing edge)
FLSTF rear fender
All part numbers in BOLD MAGENTA are new for 2009.
SUG. RETAIL
$29.95
29.95
29.95
29.95
SECTION
WILD BOAR
FENDER
ORNAMENT
FENDER
ORNAMENT
WINDSHIELDS
•Triple-plated
chrome die-cast
construction
•Excellent detailed
engraving
•Includes mounting studs and gasket
•Made in the U.S.A.
PART #
DESCRIPTION
DS-287563
Eagle head
•Make a real
statement with this
fender ornament
•Features illuminating red eyes
•Two-piece construction allows
easy installation and bulb
replacement
•Requires 12V power source
•Fits most any fender
PART #
DESCRIPTION
DS-111220
Wild boar fender ornament
TOURING
SUG. RETAIL
$224.95
SUG. RETAIL
$49.95
EXHAUST
SKULL HEAD FRONT
FENDER ORNAMENTS
DS-287552
DS-287555
EAGLE HEAD FRONT
FENDER ORNAMENTS
•Die-cast eagle fender ornaments
in two different sizes
•Small measures approximately 11/2” tall; large is approximately 21/2” tall
•Available all chrome or chrome with gold beak, plus
some with eyes that light up
•Fit most front fenders; include gasket and mounting hardware
•Sold individually
PART #
DESCRIPTION
SUG. RETAIL
DS-287556
Small chrome eagle head (gold eyes) (ea.)
$23.95
DS-287555
Small chrome eagle head
w/ lights (red eyes) (ea.)
27.95
DS-287554
Repl. bulb w/ wires for DS-287555 (ea.)
2.35
DS-287553
Large chrome eagle head
w/ lights (amber eyes) (ea.)
52.95
DS-287552
Large chrome/gold eagle head
w/ lights (amber eyes) (ea.)
65.95
A72-BP
Repl. bulb for DS-287553/552 (ea.)
1.95
LUGGAGE
SEATS &
SISSY BARS
DS-287556
DS-287553
17
•Unique skull head ornaments
available with
or without illuminated eyes
DS-287531
•Fit most front fenders
PART #
DESCRIPTION
SUG. RETAIL
DS-287531
Skull head fender ornament
$33.95
DS-287533
Skull head w/ illuminated eyes, chrome
37.95
DS-287554
Repl. bulb w/ wires for DS-287533
2.35
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
SADDLEBAG-TO-FENDER SUPPORT BRACKET
•Gloss black bracket eliminates unsightly OEM
bracket on FLTR/FLHRCI/FLHRS models
•Can be used when removing
rear bumper and rail on
FLT/FLHT models
•Installs easily using
OEM hardware
•Made in the U.S.A.
PART #
DESCRIPTION
7807-0109 For 80-08 FLT models; repl. OEM #91140-98/04
ELECTRICAL
SUG. RETAIL
$41.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
DELUXE REAR MUD
FLAP WITH LIGHTS
REAR BUMPER
ELIMINATOR BAR
•Made out of billet steel with a highly polished chrome finish
•Eliminates that ugly OEM bumper and rail
•Cleans up the rear fender area
•Easy to install; comes with all necessary hardware
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
DS-209949 For 80-08 FLHT/FLT models; repl. OEM# 91023-79
$102.95
CABLES
•Injection-molded with
a chrome-plated, steel light
DS-393740
backing plate insert, chrome
mounting strip and two mini
Baron® Custom Accents marking lights
•Grills sold separately
NOTE: Will fit with trailer hitch PART #DS-720554.
PART #
DESCRIPTION
DS-393740
Mud flap w/ lights
DS-719974
Lens grills (pr.)
BRAKES
SUG. RETAIL
$84.95
11.95
DS-393701
DS-393702
1420-0045
7808-1079
1420-0046
MUD FLAPS
•Constructed of durable 1/8” rubber
•Available in a variety of styles
•Include mounting hardware
DS-393703
•Made in the U.S.A.
SUG.
PART #
DESCRIPTION
RETAIL
1
1
9 /2” W X 6 /2” H
7808-1080 Studded w/ conchos
$23.95
DS-393704 Studded w/ diamond center 19.95
DS-393703 Studded w/ plain center
14.95
DS-393702 Plain
9.95
1420-0045 POW-MIA
14.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-393704
7808-1080
TANKS &
OIL FILTERS
TIRES,
TUBES &
WHEELS
DS-393760
SUG.
PART #
DESCRIPTION
RETAIL
1
1
9 /2” W X 6 /2” H (CONT)
DS-3937601 Studded w/ reflectors
and fringe
$27.95
101/2” W X 8” H
7808-1079 Studded w/ conchos
24.95
DS-393698 Studded w/ diamond center 18.95
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-393698
PART #
DESCRIPTION
101/2” W X 8” H (CONT)
DS-393701 Plain
1420-0046 POW-MIA
1
All part numbers in BOLD MAGENTA are new for 2009.
Nylon-reinforced rubber.
SUG.
RETAIL
$12.95
19.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1021