Untitled - Customs

Transcription

Untitled - Customs

18
1022
SECTION
18
WINDSHIELDS
FORWARD CONTROL KITS
•Chrome-plated steel forward controls
•Replace OEM forward controls or convert from mid-controls
•Include rubber insert footpegs, shift peg and mounting hardware;
use stock brake master cylinder
TOURING
NOTE: Not for use with 2-1 exhaust systems.
PART #
DESCRIPTION
FOR 04-09 XL MODELS
1622-0140
Standard position
1622-0141
2” extended
REPLACEMENT COMPONENTS
1622-0143
Shift lever
1622-0144
Brake pedal
1622-0146
Foot peg
SUG. RETAIL
1622-0140
LUGGAGE
$414.95
469.95
SEATS &
SISSY BARS
24.95
57.95
37.95
EXHAUST
DS-243485
FUEL/AIR
SYSTEMS
DS-243531
FORWARD
CONTROLS
ENGINE
•Updated forward controls
come complete with brake
and shift forward controls
•Chrome-plated mounts and hardware;
come complete with O-ring footpegs
•Will not work with engine guards
TRANSMISSION
& DRIVELINE
NOTE: PART #s DS-243531 and DS-243523 require custom brake line.
PART #
DESCRIPTION
FOR 84-99 FXST, FLST AND 58-84 FX/FL MODELS
DS-243531
Forward controls (includes 3/4” master
cylinder – Kelsey-Hayes)
DS-243523
2” extended forward controls (includes
3/4” master cylinder – Kelsey-Hayes)
1602-0072
Repl. shift lever shaft
1602-0081
Repl. shift lever
1610-0013
Repl. brake pedal
SUG. RETAIL
$483.95
435.95
24.90
29.95
56.95
PART #
DESCRIPTION
FOR 82-94 FXR MODELS
DS-243485
Forward controls
1602-0073
Repl. shift lever shaft
1602-0082
Repl. shift lever
1610-0014
Repl. brake pedal
SUG. RETAIL
$281.95
19.95
19.95
56.95
GASKETS
& SEALS
ELECTRICAL
LIGHTING
DS-243528
HANDLEBARS,
CONTROLS
& MIRRORS
1622-0193
CABLES
BRAKES
FORWARD
CONTROLS
WITHOUT PEGS
1601-0166
FORWARD CONTROL KIT
•Kit includes chrome motor mounts,
shifter arm, brake pedal, linkage rods
for brake and shifter and mounting hardware
•Accept most styles of footpegs and shifter pegs
(must be purchased separately)
NOTE: Controls are compatible with 883/1200C styles of exhaust only.
Not for use with some types of highway bars.
NOTE: Not for use with 2-1 exhaust systems.
PART #
DESCRIPTION
FOR L87-03 XL (EXCEPT 883R W/ 2-1 EXHAUST)
DS-243528
Forward controls
1602-0074
Repl. shift lever
1601-0166
Repl. shift linkage kit
1610-0015
Repl. brake pedal
SUG. RETAIL
•Sturdy steel construction
•Polished with a brilliant chrome finish
•Footpegs and shift peg not included; use standard pegs to achieve
the look you want
•Use stock rear master cylinder
•Includes all necessary mounting hardware
•2” extension kit available separately
PART #
DESCRIPTION
SUG. RETAIL
1622-0193
Forward controls for 91-09 FXD models
$319.95
1622-0194
2” extension kit
99.95
$369.95
27.95
52.95
38.95
1622-0192
FORWARD CONTROLS
•Billet-aluminum construction
•Polished with a brilliant chrome finish
•Includes master cylinder and all necessary mounting hardware
•Footpegs and shift peg not included; use standard pegs to achieve the
look you want
•Adapter kit for FXSTD available separately
PART #
DESCRIPTION
SUG. RETAIL
FOR 00-06 FXST MODELS
1622-0191
Forward controls
$549.95
1622-0192
Adapter kit for FXSTD
24.95
All part numbers in BOLD MAGENTA are new for 2009.
1622-0191
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1023
SECTION
18
WINDSHIELDS
TOURING
1202-1010
(Diamond
chrome)
1622-0214
(Slotted
night series)
1622-0213
(Diamond
night series)
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
1622-0112
(Slotted
w/rubber
pegs)
DS-243442
(Drilled)
1622-0101
(Gothic)
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
1622-0102
(Pearl)
1622-0206
(Diamond)
DS-243451
(Slotted)
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
FORWARD CONTROLS
WITH MASTER CYLINDER
•Made from billet aluminum with stainless hardware
•3/4” thick mounting plates for superior strength
•Feature sealed bearings on the pivot points for
smooth operation and no maintenance
•5/8” bore master cylinder has radius corners with
side-mount brake line fitting
•Shifter and brake arms are splined for complete adjustability
•Available in standard, 3” extended, or 2” under applications
•Also fits most custom frames
•Available with a chrome-plated, Night Series or black anodized finish
•All Night Series controls feature rubber pegs
•Made in the U.S.A.
1622-0207
(Slotted)
1622-0015
(Slotted
w/rubber
pegs, black
NOTE: 00-09 FXST models require a 00-06 style kickstand, bracket and spring plate.
NOTE: Master cylinders accept rebuild kit PART #DS-195042.
NOTE: 3” extended versions will require a custom brake line.
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1024
NOTE: Applications listed without kickstand mount holes will require a custom kickstand.
SUG.
PART #
DESCRIPTION
RETAIL
FOR 00-09 FXST, FXSTD
1622-0010 Gothic; chrome
$1,092.95
1622-0011 Gothic, + 3”; chrome
1,113.95
1622-0111 Pearl; chrome
970.95
1622-0114 Pearl, +3”; chrome
987.95
1202-1010 Diamond; chrome
970.95
1622-0213 Diamond; night series
970.95
1202-1011 Diamond, +3”; chrome
987.95
1622-0215 Diamond, +3”; night series
987.95
1622-0221 Diamond (w/o kickstand
mount holes); chrome
970.95
1622-0222 Diamond (w/o kickstand
mount holes); night series
970.95
1622-0217 Diamond, -2” (w/o kickstand
970.95
1622-0218 Diamond, -2” (w/o kickstand
970.95
1622-0225 Diamond, +3” (w/o kickstand
987.95
1622-0226 Diamond, +3” (w/o kickstand
987.95
DS-243441 Slotted; chrome
970.95
1622-0214 Slotted; night series
970.95
DS-243444 Slotted, +3”; chrome
987.95
1622-0216 Slotted, +3”; night series
987.95
1622-0223 Slotted (w/o kickstand
970.95
1622-0224 Slotted (w/o kickstand
970.95
SUG.
PART #
DESCRIPTION
RETAIL
FOR 00-09 FXST, FXSTD (CONT)
1622-0219 Slotted, -2” (w/o kickstand
$970.95
1622-0220 Slotted, -2” (w/o kickstand
970.95
1622-0227 Slotted, +3” (w/o kickstand
987.95
1622-0228 Slotted, +3” (w/o kickstand
987.95
1622-0112 Slotted w/ rubber
pegs; chrome
970.95
DS-243442 Drilled; chrome
970.95
DS-243445 Drilled, +3”; chrome
987.95
FOR L73-99 FX, 83-86 FL, 80-86 FXWG, 84-99 FXST
1622-0012 Gothic; chrome
1,092.95
1622-0101 Gothic, -2”; chrome
1,092.95
1622-0013 Gothic, +3”; chrome
1,113.95
1622-0118 Gothic (w/o kickstand mount
holes); chrome
1,092.95
1622-0116 Gothic, -2” (w/o kickstand
1,092.95
1622-0120 Gothic, +3” (w/o kickstand
1,113.95
1622-0105 Pearl; chrome
970.95
1622-0102 Pearl, -2”; chrome
970.95
1622-0109 Pearl, +3”; chrome
987.95
1622-0119 Pearl (w/o kickstand mount
holes); chrome
970.95
SUG.
DESCRIPTION
RETAIL
FX, 83-86 FL, 80-86 FXWG,
(CONT)
Pearl, -2” (w/o kickstand
$970.95
1622-0121 Pearl, +3” (w/o kickstand
987.95
1202-1210 Diamond; chrome
970.95
1622-0206 Diamond; night series
970.95
1622-0202 Diamond, -2”; chrome
970.95
1622-0203 Diamond, -2”; night series
970.95
1202-1212 Diamond, +3”; chrome
987.95
1622-0208 Diamond, +3”; night series
987.95
DS-243451 Slotted; chrome
970.95
1622-0207 Slotted; night series
970.95
DS-243631 Slotted, -2”; chrome
970.95
1622-0204 Slotted, -2”; night series
970.95
DS-243453 Slotted, +3”; chrome
987.95
1622-0209 Slotted, +3”; night series
987.95
970.95
DS-243067 Slotted w/rubber pegs; chrome
1622-0015 Slotted w/ rubber pegs;
black anodized
970.95
1622-0016 Slotted, +3 w/ rubber pegs;
black anodized
987.95
REPLACEMENT RUBBER INSERTS FOR RUBBER PEGS
1904-7540 For shifter/brake peg
8.95
1904-7541 For folding/
male mount footpeg
8.95
1904-7542 For forward controls/
rigid mount footpeg
8.95
PART #
FOR L73-99
84-99 FXST
1622-0117
SECTION
FORWARD CONTROLS WITH
HYDRAULIC FOOT CLUTCH
WINDSHIELDS
•Billet aluminum forward controls with hardware
•Hydraulic foot clutch frees left hand for operation of hand shifter
•All feature 5/8” bore master cylinder with radius corners and
side-mount brake line fittings
•Shifter and brake arms are splined for complete adjustability
•Improved alternative for foot operation of clutch compared to mechanical
linkage when using jockey shifter
•Feature sealed bearings on the pivot points for smooth operation
and no maintenance
•Available with a chrome-plated or Night Series finish
1622-0027
TOURING
LUGGAGE
NOTE: 3” extended controls will require a custom brake line.
PART #
DESCRIPTION
FOR 86-99 SOFTAILS AND CUSTOM APPLICATIONS
1622-0104
Gothic; chrome
1622-0107
Gothic, +3”; chrome
1622-0027
Diamond; chrome
SUG. RETAIL
$1,197.95
1,218.95
1,050.95
18
PART #
DESCRIPTION
FOR 86-99 SOFTAILS AND CUSTOM APPLICATIONS (CONT)
1622-0205
Diamond; night series
1622-0108
Diamond, +3”; chrome
SUG. RETAIL
SEATS &
SISSY BARS
$1,050.95
1,113.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
DS-243076
TRANSMISSION
& DRIVELINE
1622-0210
GASKETS
& SEALS
1622-0212
ELECTRICAL
LIGHTING
CHROME FORWARD CONTROLS
•CNC-machined from 6061 T-6 aluminum
•3/4” mounting plates for superior strength
•Feature sealed bearings on the pivot points
for smooth operation and no maintenance
•Assembled with chrome hardware, kit comes
ready to install
•Used with existing stock master cylinder
•Includes foot, shift and brake pegs, swivel
joints, shift and brake rods and instructions
•Available with a chrome-plated or
Night Series finish
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
1622-0168
PART #
DESCRIPTION
L87-99 FXST
DS-243074
Slotted; chrome
91-09 DYNA GLIDE
DS-243402
Milled; chrome
DS-243078
Slotted; chrome
1622-0201
Slotted; night series
1622-0199
Diamond; chrome
1622-0200
Diamond; night series
82-94 FXR
DS-243076
Slotted; chrome
08 FLHT, FLHX, FLHR, FLTR
1622-02311
Slotted, +2”; chrome
1622-02321
Slotted, +2”; night series
2
1622-0235
1622-02362
1622-02291
SUG. RETAIL
$810.95
810.95
810.95
810.95
810.95
810.95
810.95
953.95
953.95
953.95
953.95
953.95
1
2
3
BRAKES
1622-0169
PART #
DESCRIPTION
08 FLHT, FLHX, FLHR, FLTR (CONT)
1622-02301
Diamond, +2”; night series
1622-02332
1622-02342
97-07 FLT, FLHT, FLHX, FLHR, FLTR
1622-01681, 3
1622-02111, 3
DS-2436302, 3
2,
3
1622-0212
1622-01691, 3
1622-02101, 3
SUG. RETAIL
$953.95
953.95
953.95
953.95
953.95
951.95
953.95
953.95
953.95
Recommended for riders with 34” inseam or less. Moves foot position
rearward 2” from standard floorboard position.
Recommended for riders with 34”+ inseams. Moves foot position
forward 2” from standard floorboard position.
Will not fit with engine guards or fairing lowers on 97-07 FLT/FLHT.
PHANTOMZ FORWARD CONTROLS
•High-quality chrome billet
•Available in standard and 3” extended length
•Include footpegs, shift/brake pegs, a 5/8” bore
master cylinder and mounting hardware
•Shift linkage rod is not included; must be ordered separately
1622-0138
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
NOTE: 3” extended controls will require a custom brake line.
HARDWARE,
CHEMICALS
& TOOLS
PART #
DESCRIPTION
SUG. RETAIL
FOR L73-85 FX, 83-86 FL, 80-86 FXWG, 84-99 FXST AND CUSTOM FRAMES
1622-0138
Standard length
$718.95
1622-0139
3” extended length
743.95
COVERS,
SECURITY
& GENERAL
1025
SECTION
18
WINDSHIELDS
Classic Solid
Polished
DS-243706
Left side
TOURING
DS-243674
Left side
Radial Slotted
Chrome
LUGGAGE
DS-243674
Right side
SEATS &
SISSY BARS
DS-243706
Right side
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
1622-0154
Left side
BILLET ALUMINUM
FORWARD CONTROLS
Radial Slotted
Black
•Available in a chrome, highly polished and black finish
•Shifter and brake pedal adjust to suit individual preference
•Master cylinders feature long-wearing bronze bushings,
nylon thrust washers and micro-finished 5/8” bores
•Available in classic and radial designs with wide-band pegs
•Made in the U.S.A. with domestic materials
1622-0154
Right side
NOTE: 07-09 Softails require the use of a 00-06 kickstand assembly.
NOTE: Must order shifter control rod separately for Big Twin kits,
or use a custom rod with 13” to 15” center-to-center length.
NOTE: Shifter control rod is included with XL adapter kit.
GASKETS
& SEALS
ELECTRICAL
LIGHTING
NOTE: See footpegs pages later in this section for matching pegs.
DESCRIPTION
CLASSIC SOLID
FOR 00-09 FXST, FLST
Chrome
DS-243296
Polished
Black
1622-0161
FOR 84-99 FXST, FLST, 73-85 FX, FLH
Chrome
DS-243505
Polished
DS-243706
Black
1622-0148
1
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
RADIAL SLOTTED
DS-243292
DS-243290
1622-0167
DS-243674
1622-0154
DESCRIPTION
FOR 91-09 DYNA GLIDE
Chrome
Polished
Black
FOR 84-94, 99-00 FXR, 85-03 XL
Chrome
Polished
Black
CLASSIC SOLID
RADIAL SLOTTED
DS-243507
DS-243752
1622-0150
1622-0159
1622-0158
1622-0160
DS-243506
DS-243729
1622-0149
1622-0156
1622-0155
1622-0157
XL models require mounting adapter kit PART #DS-243508 fpr 85-90 and PART #DS-243509 for 91-03.
PRICE LIST
PART #
1622-0148
1622-0149
1622-0150
1622-0154
1622-0155
1622-0156
SUG. RETAIL
$805.95
805.95
805.95
805.95
690.95
805.95
PART #
1622-0157
1622-0158
1622-0159
1622-0160
1622-0161
1622-0167
SUG. RETAIL
$805.95
690.95
805.95
805.95
805.95
805.95
PART #
DS-243290
DS-243292
DS-243296
DS-243505
DS-243506
DS-243507
SUG. RETAIL
$690.95
805.95
805.95
805.95
805.95
805.95
PART #
DS-243674
DS-243706
DS-243729
DS-243752
SUG. RETAIL
$805.95
690.95
690.95
690.95
BRAKES
1622-0164
Left side
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1622-0162
Left side
1622-0162
Right side
J-SERIES
1622-0164
Right side
FOOTRESTS FORWARD CONTROLS
& LICENSE •Design features internal reservoir
and hidden banjo fittings for sleek look
PLATE FRAMES •Constructed
of billet aluminum
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1026
•Include 9/16” bore master cylinder
•Can be mounted with or without crash bar
•Stock kick stand can be mounted to controls with included mounting block
•Available in chrome, polished, or black-anodized finish
•Sold as a set
NOTE: 07-09 Softails require the use of a 00-06 kickstand assembly.
PART #
DESCRIPTION
SUG. RETAIL
FOR 00-09 FXST, FLST
1622-0163
Chrome
$920.95
1622-0162
Polished
805.95
1622-0164
Black
920.95
PART #
DESCRIPTION
FOR 84-99 FXST, FLST, 73-85 FX, FLH
1622-0152
Chrome
1622-0151
Polished
1622-0153
Black
SUG. RETAIL
$920.95
805.95
920.95
SECTION
18
WINDSHIELDS
1622-0281
Left side
1622-0166
Left side
TOURING
1622-0166
Right side
1622-0281
Right side
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
J-FL SERIES FORWARD CONTROLS
•The style and feel of forward controls designed specifically for baggers
•Constructed of steel and billet aluminum
•Utilize stock mounts, pivot points and master cylinder
•Can be mounted with or without crash bar
•Stock kick stand can be mounted to controls with included mounting block
•All steel components have a powder-coat black finish; billet aluminum
components are available with chrome or black-anodized finish
•Sold as a set
PART #
DESCRIPTION
FOR 09 FLHT, FLHR, FLHX, FLTR
1622-0287 Chrome
1622-0288 Chrome multi-band
1622-0289 Black
1622-0290 Black multi-band
SUG. RETAIL
$575.95
575.95
575.95
575.95
1622-0165
Right side
1622-0165
Left side
FUEL/AIR
SYSTEMS
ENGINE
PART #
DESCRIPTION
FOR 08 FLHT, FLHR, FLHX, FLTR
1622-0189 Chrome
1622-0190 Black
SUG. RETAIL
$575.95
575.95
575.95
575.95
PART #
DESCRIPTION
SUG. RETAIL
FOR 97-07 FLT, FLHT, FLHR, FLHX, FLTR
1622-0165 Chrome
$575.95
575.95
1622-0166 Black
575.95
575.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
DS-243509
LIGHTING
DS-243511
HANDLEBARS,
CONTROLS
& MIRRORS
1622-0280
CABLES
REBUILD KITS, ADAPTERS AND REPLACEMENT PARTS
PART #
DS-243513
DS-243463
DS-243464
1622-0280
DS-243509
DS-243508
DS-243511
DS-243514
DS-243517
DS-243518
DESCRIPTION
Rebuild kit for JayBrake billet aluminum forward controls w/ 3/4” master cylinder
Rebuild kit for JayBrake billet aluminum forward controls w/ 5/8” master cylinder
Rebuild kit for JayBrake J-Series foward controls w/ 9/16” master cylinder
XL adapter kit for 04-09 5-speed w/ rubber-mounted engine (use w/ FXR model forward control kit)
XL adapter kit for 91-03 5-speed (use w/ FXR model forward control kit)
XL adapter kit for 85-90 4-speed (use w/ FXR model forward control kit)
Stainless steel shifter control rod for Big Twin forward control sets (holes 14” center-to-center)
Repl. wide band footpeg rubbers (8-pk.) for two footpegs
Repl. wide band shifter peg rubbers (4-pk.)
Repl. wide band passenger footpeg rubber set (for two pegs)
SUG. RETAIL
$24.95
24.95
24.95
270.95
270.95
270.95
54.95
18.95
8.95
18.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
FTW FOWARD CONTROLS
•1018 steel construction with black matte military paint
•Feature a Brembo 13mm bore master cylinder with a WCC reservoir, a CFL style brake peg,
a smooth shift peg and FTW style footpegs; mounting hardware not included
•Accepts stock shift linkage
•Matching FTW passenger footpegs are also available
NOTE: Requires the use of a custom brake line.
PART #
1622-0197
DESCRIPTION
For 73-99 FX/FL, FXWG, FXST and custom frames with
73-99 forward control mounts
SUG. RETAIL
$1,049.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1027
SECTION
18
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FORWARD CONTROLS
•Main components are designed to fit
with existing shapes on the engine, primary
and frame for smooth, flowing style
•Flush countersunk fasteners on all mounting
plates for a clean, uncluttered appearance
•All ball joints, linkages and visible hardware
have a beautiful chrome finish
•Igus shifter bearings provide smooth,
maintenance-free operation
•Available in standard and extended
lengths (standard recommended for
riders with an inseam of 33” or less)
•Footpegs and shift lever
sold separately
1622-0058
NOTE: Forward controls are not
compatible with most engine guards.
PART #
DESCRIPTION
FOR 91-09 DYNA GLIDE
1622-0058
Standard forward controls
SUG. RETAIL
$399.95
FUEL/AIR
SYSTEMS
PART #
DESCRIPTION
FOR 91-09 DYNA GLIDE (CONT)
1622-0059
3” extended forward controls
SUG. RETAIL
$399.95
STAGE II CUT-OUT
FORWARD CONTROLS
•Features hidden brake linkage, built-in brake light switch,
sealed ball bearing shifter and brake arms
•Brake arm and shifter arm have a three-angle adjustment
•Uniquely designed folding footpegs have built-in heel
rests and offer rotational adjustment
•Master cylinder uses OEM rebuild kit #42374-86 or
PART #DS-195046
ENGINE
TRANSMISSION
& DRIVELINE
PART #
1622-0023
GASKETS
& SEALS
DESCRIPTION
For 84-99 Softail models and
most custom Softail frames
SUG. RETAIL
$1,059.95
DS-243648
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
1622-0001
Left side
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1622-0001
Right side
FOOTRESTS
BILLET FORWARD CONTROLS
& LICENSE CHROME
•Features hidden brake linkage, built-in brake light switch, sealed ball bearing shifter and brake arms
PLATE FRAMES •Brake arm and shifter arm have a three-angle adjustment
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1028
•Uniquely designed folding footpegs have built-in heel rests and offer rotational adjustment
•Master cylinder uses OEM rebuild kit #42374-86 or PART #DS-195046
NOTE: 00-09 applications will not accept the stock kickstand, requires the use of custom kickstand; kickstand wedge
PART #0510-0040 recommended to add 6° lean angle adjustment.
PART #
DESCRIPTION
FOR 00-09 FXST/FLST MODELS
1622-0002
Forward control kit
1622-0003
Forward control kit w/ rubber inserts
FOR 84-99 FXST, FLST, 70-84 FX, FLH AND ANY CUSTOM FRAME THAT WILL ACCEPT FXST-TYPE FORWARD CONTROLS
DS-243648
Forward control kit
1622-0001
Forward control kit w/ rubber inserts
SUG. RETAIL
$1,269.95
1,299.95
1,269.95
1,299.95
SECTION
18
WINDSHIELDS
1622-0029
1622-0122
TOURING
1622-0028
LUGGAGE
SEATS &
SISSY BARS
1622-0258
1622-0030
EXHAUST
1622-0272
FUEL/AIR
SYSTEMS
ENGINE
1622-0034
TRANSMISSION
& DRIVELINE
1622-0262
1622-0080
GASKETS
& SEALS
ELECTRICAL
CHROME FORWARD CONTROLS WITH MASTER CYLINDER
•Manufactured from 6061 billet aluminum with a high-quality chrome finish
•Pro-Smooth series features side-port 3/4” bore master cylinder and folding footpegs
•Classic series feature a front-port 3/4” bore master cylinder and rigid-mount footpegs
•Tribal series feature a side-port 11/16” bore master cylinder and rigid-mount footpegs
•Medieval and Valor series feature 3/4” bore master cylinder and rigid-mount footpegs
•All Flat Top designs feature a new footrest design with a flat rest and a soft rubber
insert for all-day comfort
•Matching shift pegs and brake pegs are also included with each set of controls
•Master cylinder rebuild kits available separately
1622-0245
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
NOTE: +2” extended controls require an extended shift linkage (12.75”) and an extended brake line.
NOTE: Matching grips and rear pegs also available.
CABLES
NOTE: 00-09 FXST applications will require 00-06 style kickstand, bracket and spring plate.
PART #
DESCRIPTION
FOR 00-09 FXST
1622-0028 Premium 1.5”, chrome
1622-0122 Premium Flat Top,
chrome
1622-0029 Pro-Smooth, chrome
1622-0258 Pro-Smooth, black
1622-0040 Pro-Smooth +2”, chrome
1622-0259 Pro-Smooth +2”, black
1622-0030 Classic, chrome
1622-0263 Classic, black
1622-0041 Classic +2”, chrome
1622-0264 Classic +2”, black
1622-0083 Tribal Lance, chrome
1622-0267 Tribal Lance, black
1622-0248 Valor, chrome
1622-0249 Valor, black
1622-0250 Valor +2”, chrome
1622-0251 Valor +2”, black
1622-0272 Medieval, chrome
1622-0273 Medieval, black
1622-0274 Medieval +2”, chrome
1622-0275 Medieval +2”, black
SUG.
RETAIL
$775.95
740.95
699.95
709.95
735.95
745.95
700.95
710.95
735.95
745.95
825.95
835.95
740.95
750.95
775.95
785.95
759.95
835.95
861.95
870.95
PART #
DESCRIPTION
FOR 84-99 FXST
1622-0032 Premium 1.5”, chrome
1622-0123 Premium Flat Top,
chrome
1622-0033 Pro-Smooth, chrome
1622-0256 Pro-Smooth, black
1622-0261 Classic, black
1622-0080 Tribal, chrome
1622-0266 Tribal, black
1622-0247 Valor +2”, black
SUG.
RETAIL
$775.95
740.95
699.95
709.95
735.95
745.95
700.95
710.95
735.95
745.95
825.95
835.95
740.95
750.95
775.95
785.95
825.95
835.95
860.95
870.95
PART #
DESCRIPTION
FOR 06-09 DYNA GLIDE MODELS
1622-0255 Valor +2”, black
MASTER CYLINDER REBUILD KITS
1731-0151 For 3/4” master cylinder
1731-0152 For 11/16” master cylinder
+3” FORWARD CONTROL EXTENSION KIT
DESCRIPTION
For 84-99 FXST premium controls (PART # 1622-0032)
$735.95
745.95
735.95
745.95
740.95
750.95
775.95
785.95
825.95
835.95
860.95
870.95
35.95
35.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
•3” extension kit helps those who like a little extra room
to stretch out
•Includes mounting plates only; extended-length shift linkage
and brake line are not included and must be
purchased separately
PART #
1622-0049
SUG.
RETAIL
SUG. RETAIL
$175.95
COVERS,
SECURITY
& GENERAL
1029
SECTION
18
1622-0180
Left side
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
BILLET
FORWARD
CONTROLS
•CNC-machined
billet aluminum construction
•Sleek design uses lever pivot for footpeg mount
•Choose from chrome or black finish
•Available in stock and +3” lengths
•Includes footpegs and brake/shifter pegs
1622-0180
Right side
1622-0182
Right side
NOTE: 3” extended kits will require a custom brake line.
EXHAUST
FUEL/AIR
SYSTEMS
NOTE: 07-09 applications will require the use of an 00-06 style kickstand assembly.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
FOR 00-09 FXST/FLST
FOR 00-09 FXST/FLST (CONT)
1622-0180
Stock length, chrome
$995.95 1622-0181
+3” length, chrome
1622-0182
Stock length, black
995.95 1622-0183
+3” length, black
SUG. RETAIL
$995.95
995.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
DS-194680
Right side
DS-194680
Left side
ELECTRICAL
Left side
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
Right side
NESS-TECH® CHROME RADIUS FORWARD CONTROL KITS
•Radius design with integrated 3/4” master cylinder; feature hidden master cylinder linkage
•Available in stock or 3” extended versions (3” extended for FX, FL and FXST/FLST models only)
•Footpegs and shifter pegs are not included, must be purchased separately
•Kits require one pair of male mount footpegs and two shifter pegs
CABLES
BRAKES
NOTE: 07-09
PART #
DS-194680
DS-194683
DS-222814
DS-222815
models require kickstand kit PART # 0510-0084; sold separately
DESCRIPTION
SUG. RETAIL
For 00-09 FXST and FLST models
$1,074.95
For 00-09 FXST and FLST models (3” extended)
1,074.95
For 84-99 Softail, 70-84 FX and FL models
1,074.95
For 84-99 Softail, 70-84 FX and FL models
(3” extended)
1,074.95
PART #
DS-222802
DS-222818
0510-0084
DESCRIPTION
SUG. RETAIL
$35.95
Master cylinder rebuild kit (3/4” bore, late style)
Master cylinder rebuild kit (5/8” bore, early style)
39.95
Kickstand kit for 07-09 models
102.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1030
1622-0171
Left side
1622-0170
Left side
1622-0170
Right side
RETRO FORWARD CONTROLS
1622-0171
Right side
•Retro styled forward controls
•Available in either show quality chrome or rich black anodizing;
black anodized feature machine cuts
•Include custom kickstand mount
NOTE: 07-09 models require kickstand kit.
PART #
DESCRIPTION
FOR 00-09 FXST/FLST
1622-0170
Chrome
1622-0171
Black
SUG. RETAIL
$951.95
951.95
PART #
DESCRIPTION
0510-0084
Kickstand kit for 07-08 models
SUG. RETAIL
$102.95
SECTION
18
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
1622-0172
1622-0173
EXHAUST
3-D FORWARD CONTROLS
•Machined from 6061 T-6 billet aluminum, then show chromed
•11/16” bore works with most custom and stock aftermarket calipers
•Master cylinder features contoured 3-D design and side mount
hidden brake line; master cylinder cover features Thunder 3-D
logo cross
•Sealed roller bearings at pivot points for smooth operation
•Ball detent folding pegs come in matching ball-milled or flamed design
PART #
FOR 86-99 FXST/FLST
1622-0172
DESCRIPTION
SUG. RETAIL
Ball-milled
$1,285.95
FUEL/AIR
SYSTEMS
PART #
DESCRIPTION
1622-0173
Flamed
SUG. RETAIL
ENGINE
$1,285.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
1622-0176
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DEAD END FORWARD CONTROLS
•Manufactured from 6061 T-6 billet aluminum;
finished with high-quality show chrome
•Comes with ball-milled or flamed Dead End
shifter and foot pegs
•Pegs fold up using ball and spring detent
3
• /4” bore master cylinder with hidden side mount for brake line
•Thunder Cycle logo 3-D machined on master cylinder cover
1622-0179
BRAKES
SUG. RETAIL
TANKS &
OIL FILTERS
$884.95
884.95
884.95
DASHES
& GAUGES
NOTE: 07-09 applications will require the use of a 00-06 kickstand assembly.
PART #
00-09 FXST/FLST
1622-0176
1622-0179
86-99 FXST/FLST
1622-0174
DESCRIPTION
SUG. RETAIL
Ball-milled
Flamed
$884.95
884.95
Ball-milled
884.95
PART #
86-99 FXST/FLST (CONT)
1622-0175
1622-0177
1622-0178
DESCRIPTION
Ball-milled, 2” extended
Flamed
Flamed, 2” extended
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
1622-0286
Right
FORWARD CONTROLS
•CNC-machined from billet aluminum
•Unique design and features make these
controls a must-have upgrade for your stock or custom motorcycle
PART #
FOR 86-99 SOFTAIL
1622-0285
DESCRIPTION
Polished
SUG. RETAIL
$396.95
1622-0286
Left
PART #
FOR 86-99 SOFTAIL (CONT)
1622-0286
HARDWARE,
CHEMICALS
& TOOLS
DESCRIPTION
Chrome
SUG. RETAIL
$555.95
COVERS,
SECURITY
& GENERAL
1031
SECTION
18
1622-0097
Left side
WINDSHIELDS
FORWARD CONTROL KITS
TOURING
LUGGAGE
SEATS &
SISSY BARS
•Features an 11/16” bore master cylinder
that is compatible with most stock and
aftermarket rear calipers
•Flush mount reservoir lid and 3-D contoured master
cylinder with hidden brake line mount
•Shifter side control with kickstand mounting holes
•Sealed roller bearings at all pivot points for
1622-0100
smooth operation and lasting durability
•Matching foot and shifter pegs
PART #
DESCRIPTION SUG. RETAIL
included; in a folding style with
00-09 FXST/FLST MODELS
rubber inserts
1622-0099 Chrome
$979.95
NOTE: 07-09 applications will require
979.95
the use of a 00-06 kickstand assembly. 1622-0100 Black
1622-0097
Right side
PART #
87-99 FXST/FLST MODELS
1622-0097 Chrome
$979.95
1622-0098 Black
979.95
EXHAUST
DS-243824
FUEL/AIR
SYSTEMS
DS-243196
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1032
DS-243823
FORWARD CONTROLS
•Chrome billet aluminum with
cutout design
•Include a 3/4” bore
master cylinder
•For offset engines, forward
control spacers available separately
in 1/2” and 3/4” thicknesses
•Optional matching passenger pegs
and shifter rod available; replacement
components sold separately
NOTE: Check fender clearance on FL models
before operating.
DS-375155
PART #
DESCRIPTION
FOR 84-99 SOFTAIL, 70-84 FX/FL
DS-243196
Forward controls
OPTIONAL/REPLACEMENT COMPONENTS
DS-375155
161/8” shifter rod
DS-375156
DS-253012
Repl. brake/shifter rubbers (6-pc. set)
FORWARD
CONTROLS WITH
FLOORBOARD MOUNTS
SUG. RETAIL
$609.95
84.95
83.95
12.95
DS-243824
PART #
DESCRIPTION
OPTIONAL/REPLACEMENT COMPONENTS (CONT)
1/2” shifter spacer
DS-243823
1/2” brake spacer
DS-243824
DS-243828
3/4” brake spacer
DS-243829
DS-243203
•Chrome billet aluminum with
a 3/4” master cylinder
•Available with toe shifter only
or with heel/toe shifter
•Will accept any stock style 86-99
FLST floorboards
DS-243823
•Optional passenger footpegs and shifter rod
available separately
•Spacers available separately for offset motors; sold each
FOR 84-99 FXST/C, 86-99 FLST/C/F/N AND 73-85 FX/FL
PART #
DESCRIPTION
FORWARD CONTROLS
DS-243203
W/ toe shifter only
DS-243204
W/ heel and toe shifter
OPTIONAL/REPLACEMENT COMPONENTS
DS-375156
DS-253012
Repl. brake/shifter rubbers (6-pc. set)
SPACERS
DS-243823
1/2” brake spacer
DS-243824
DS-243828
3/4” brake spacer
DS-243829
SUG. RETAIL
$838.95
838.95
83.95
12.95
26.95
28.95
30.95
30.95
SUG. RETAIL
$26.95
28.95
30.95
30.95
SECTION
18
WINDSHIELDS
TOURING
1622-0065
1622-0019
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
DS-243583
ENGINE
1904-0003
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
1622-0067
TANKS &
OIL FILTERS
1622-0072
CHROME BILLET FORWARD CONTROLS
•Controls feature folding footpeg design, splined adjustable shift shaft for precise shift arm
adjustment, sealed roller bearings on all pivot points and 5/8” bore master cylinder
•Mounting plates, master cylinder, brake and shift levers are 6061 T-6 aluminum
•Footpeg mounts, brake and shift lever shafts machined from chromed stainless steel for strength
•Shift linkage rod, master cylinder and all mounting hardware included
•Matching passenger footpegs available separately; see page 1049
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
NOTE: Accept master cylinder rebuild kit PART #DS-195042.
NOTE: 07-09 applications will require the use of 00-06 style kickstand assembly.
FOR 00-09 FXST/FLST
PART #
CHROME
1622-0019
1622-0020
1904-0001
1904-0006
DESCRIPTION
SUG. RETAIL
Scimitar
2” extended Scimitar
Ball-milled
3” extended cutout
$1,037.95
1,037.95
1,037.95
1,037.95
PART #
BLACK ANODIZED
1622-0065
1622-0066
1622-0069
1622-0074
DESCRIPTION
Scimitar
2” extended Scimitar
Ball-milled
SUG. RETAIL
$1,037.95
1,037.95
1,037.95
1,037.95
FOR 84-99 FXST/FLST, 78-83 FX AND 73-83 FL MODELS
PART #
CHROME
1622-0017
DS-243583
1904-0000
1904-0003
1904-0004
DESCRIPTION
SUG. RETAIL
Scimitar
Ball-milled
3” extended ball-milled
Cutout
$1,037.95
1,037.95
1,037.95
1,037.95
1,037.95
PART #
BLACK ANODIZED
1622-0063
1622-0067
1622-0068
1622-0071
1622-0072
DESCRIPTION
Scimitar
Ball-milled
3” extended ball-milled
Cutout
SUG. RETAIL
$1,037.95
1,037.95
1,037.95
1,037.95
1,037.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1033
SECTION
18
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
FORWARD CONTROL
RELOCATION KIT
•Polished chrome kit relocates the
footpegs, brake lever and shifter
lever almost 3” further forward
to offer a more comfortable
riding position
•Comes complete with chrome
brake and shifter plates and all the
chrome hardware needed to mount the assemblies and kickstand
•Uses original stock footpegs, brake lever, shifter lever and shifter arm
•Instructions included
PART #
DS-243486
DESCRIPTION
For L87-99 FXST (not FLST)
SUG. RETAIL
$212.95
3” FORWARD CONTROL
EXTENSION KITS
1601-0167
•Moves the OEM controls forward
almost 3” for a more comfortable riding position
•Kit includes black anodized billet aluminum adapter plates, extended
stainless-steel rear brake line, extended shifter rod, kickstand spring pin
and necessary hardware
•Uses stock footpegs, brake lever, shift lever and shift arm
PART #
1601-0206
1601-0167
DESCRIPTION
For all 07-09 FXST
For all 00-06 FXST
SUG. RETAIL
$200.95
200.95
EXHAUST
FUEL/AIR
SYSTEMS
EXTENSION KIT
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
•Moves the stock Dyna Wide Glide
controls a full 3” further forward
•Kit includes extension plates,
countersunk trim plates, linkages
and all necessary hardware
•All components are show-chromed
•Requires only basic hand tools
to install
PART #
1622-0079
DS-243020
DESCRIPTION
For 93-02 FXDWG and any Dyna models using
H-D forward controls (OEM # 49080-93A)
SUG. RETAIL
$189.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1034
NOTE: Standard extension kit will require a custom brake line.
1
•Move the OEM
DS-243459
controls forward
2” or 3” for more leg room
•Use stock footpegs, brake lever, shift lever and shift arm
•Kits include black powder coated aluminum adapter plates, stainless
steel extended shifter rod and mounting bolts
•Use 3” extensions for people 6’ 3” and taller
NOTE: Extended rear brake line must be purchased separately; for
the 2” extension use Drag Specialties brake line kit PART #1741-0175
or PART #1741-0707, and for the 3” extension use kit PART #1741-0176
or PART #1741-0708.
PART #
DESCRIPTION
SUG. RETAIL
FOR 00-09 FXST AND FXSTD MODELS
DS-243458
2” forward control extension
$119.95
DS-243459
3” forward control extension
119.95
1622-0242
•Moves your stock controls forward 3” for a more
comfortable ride
•Standard style includes extension plates with stainless
steel shift rod and stainless steel brake line
•Deluxe style includes extension plates, stainless steel
brake line and billet aluminum shifter rod
PART #
DS-243020
DS-243021
FORWARD
CONTROL
EXTENSION
KITS
TANKS &
OIL FILTERS
DASHES
& GAUGES
DS-243021
FORWARD CONTROL EXTENSIONS
DESCRIPTION
Standard extension kit for 00-06 FXST
Deluxe extension kit for 00-05 FXST
SUG. RETAIL
$219.951
329.95
Requires the use of a custom brake line.
3” FORWARD
CONTROL
EXTENSION KITS
•Extend forward controls
with forward-mount master
cylinders by 3”
•Extension plates are billet
aluminum with a chrome or black-anodized finish
•Include mounting hardware and shifter rod
1622-0078
NOTE: Will require the use of a 3” extended rear brake line.
PART #
DESCRIPTION
FOR 84-99 FXST, FXWG, 70-84 FX, FL
1622-0078
Black-anodized
1622-0198
Chrome
SUG. RETAIL
$167.95
167.95
1622-0240
FORWARD CONTROL
ADAPTER PLATE KIT
KICK-BACK
ADAPTER PLATES
1622-0238
•CNC-machined billet aluminum
plates move forward controls backward for shorter riders
•Bolt to the frame where the controls mount from the factory
•Sold in pairs
NOTE: Need 11/8”+ clearance between exhaust and controls, and between
primary and controls, for these to work; may also need to shorten shift
and brake rods depending on controls configuration.
PART #
DESCRIPTION
SUG. RETAIL
FOR 84-99 FXST
1622-0241
13/8” back; black
$119.95
1622-0242
13/8” back; chrome
119.95
FOR 91-09 DYNA MODELS
1622-0239
11/8” back and 1” up; black
119.95
1622-0240
11/8” back and 1” up; chrome
119.95
FOR 82-94 FXR
1622-0237
13/8” back; black
119.95
1622-0238
13/8” back; chrome
119.95
•Backing plate adapter kit allows
mounting of 84-99 forward controls
on to stock 00-09 Twin Cam Softail frames
•Billet aluminum construction with black
anodized finish, includes hardware
PART #
DESCRIPTION
1622-0060
For 00-09 Twin Cam Softail
SUG. RETAIL
$130.95
2” FORWARD
CONTROL EXTENSION
•Extends forward controls
with forward mount
master cylinder by 2”
•Black anodized and
compact in design
NOTE: May require the use of a custom brake line.
PART #
DS-243022
DESCRIPTION
For 84-99 Softail models and most
aftermarket frames
SUG. RETAIL
$139.95
SECTION
18
WINDSHIELDS
TOURING
GO-FORWARD
2” FLOORBOARD
EXTENSION KIT
1622-0005
•Moves floorboards,
shifter and brake forward 2”
•Utilizes stock floorboards,
shift lever, shifter arm and brake arm
•Black powder-coated aluminum extension
plates, stainless steel extended shift rod and
necessary mounting hardware included
•Extended rear brake line must be purchased separately;
Drag Specialties brake line kit PART #1741-0175 or 1741-0707
LUGGAGE
SEATS &
SISSY BARS
7808-2001
EXHAUST
NOTE: Will not work with engine guards, except on FLSTF or highway
bars; designed for use with stock fenders, brake pedals and shift levers
NOTE: Installation of this kit may cause interference between front
fender and floorboards. Check clearance of fender and floorboards with
front fork compressed and extended.
PART #
DESCRIPTION
SUG. RETAIL
7808-2001
For 00-06 FLST models
$129.95
1622-0005
For 86-99 FLST models
199.95
DRIVER FLOORBOARD
MOUNTING BRACKETS
Shift side
Brake side
CHROME BILLET FORWARD
CONTROL CONVERSION KIT
•Turns your stock forward controls into
billet-style controls
•Uses OEM backing plates and linkage
•Kit includes brake pedal, shift lever with peg,
inner shifter arm, footpegs and chrome mounting hardware
PART #
DESCRIPTION
SUG. RETAIL
FOR 00-06 FXST
DS-243155
Forward control conversion kit
$454.95
•Chrome reproductions of
the OEM mounting brackets
•Utilize OEM mounting hardware
•Floorboards are not included; must be purchased separately
PART #
DS-530620
DESCRIPTION
For 83-08 FLT, FLHT (4-pc.)
SUG. RETAIL
$176.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
PASSENGER
BOARD MOUNTS
LIGHTING
PART #
1621-0108
DESCRIPTION
For 93-09 Dresser and Road King models
SUG. RETAIL
$119.95
•Chrome-plated machined steel
•Replace the existing black mounts
•Sold in pairs
PART #
1904-1704
ENGINE
ELECTRICAL
•Replaces the stock black mounts
•Beautiful chrome-plated finish
•Accept stock or most aftermarket
passenger floorboards
•Sold in pairs
PASSENGER
FLOORBOARD MOUNTS
FUEL/AIR
SYSTEMS
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DESCRIPTION
SUG. RETAIL
For 93-09 Dresser models; repl. OEM #52719-93
$99.95
BRAKES
1621-0001
TANKS &
OIL FILTERS
FORWARD CONTROL MOUNTS
•Custom-machined-raw mounts allow
mounting of aftermarket 84-99 style
Softail forward controls to Lowlife/Hardlife frames
•Welding required
PART #
1622-0090
DESCRIPTION
For ICI Lowlife/Hardlife frames
SUG. RETAIL
$154.95
1621-0023
DS-530613
ROAD-ROD® DRIVER FLOORBOARD BRACKET KITS
FORWARD
CONTROLS/
FLOORBOARD
MOUNTING BRACKETS
•Allow for the installation of FLT/FLST style floorboards on a V-Rod
without modifications
•Front brackets are made of aluminum with a polished finish
•Rear brackets are made from steel with a powder-coated finish
NOTE: Floorboards are not included; must be purchased separately.
For front boards only. Rear not available.
NOTE: Does not fit night rod model VRSCD.
PART #
FOR 02-09 VRSCA/B V-ROD
1621-0001
1621-0023
DESCRIPTION
Silver
Black
SUG. RETAIL
$299.95
299.95
DS-530614
DESCRIPTION
Left front floorboard mounting stud;
repl. OEM #50989-86
Left rear floorboard mounting bracket;
repl. OEM #50990-86B
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-530614
•Chrome finish OEM components
PART #
FOR 86-99 FLST
DS-530613
DASHES
& GAUGES
SUG. RETAIL
$9.95
39.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1035
SECTION
18
WINDSHIELDS
FLOORBOARDS
•Machined from 1018 steel, lazer cut and welded
•Feature black matte military paint and a polished stainless insert
•Includes heel/toe shifter and brake arm with a bear-trap style peg
•Measure 16” L x 4” W x 11/4” D
•Matching FTW footpegs for the passenger are also available
TOURING
PART #
1621-0124
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
DESCRIPTION
For 80-07 FLT/FLHT/FLHR/FLTR
SUG. RETAIL
$599.95
RADIUS TEARDROP BILLET
FLOORBOARD KIT
and then show-chrome-plated
•Kit consists of floorboards, rubber
inserts, mounting brackets and hardware
•Radius-style floorboards complement the
radius styling of other Ness products
PART #
DESCRIPTION
SUG. RETAIL
DS-254453 For 80-09 FLT, FLHT, FLHR, FLTR and 00-09 FLST models
$500.95
DS-254441
ENGINE
CHROME BILLET
TRANSMISSION PASSENGER FLOORBOARD KIT
industry first from Arlen Ness
& DRIVELINE •Another
•Made from 3/8” billet aluminum plate that has been machined and fitted with rubber cushion inserts
GASKETS
& SEALS
•All mounting brackets are specially designed to work with the models listed below
•Sold in pairs
PART #
DS-254441
DS-254420
DS-254420
DESCRIPTION
Passenger floorboards for 93-09 FLT models (except FLHRS/SI)
Repl. rubber kit for two floorboards
ELECTRICAL
DS-254434
SUG. RETAIL
$304.95
27.95
DS-254435
DS-254436
LIGHTING
BANANA BOARDS
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
•Bowed floorboards feature machined
billet construction, chrome-plated
finish with black rubber inserts and
bright finish rivets
•Available in two lengths: 181/2” and 133/4”
•Banana shifter pedal and peg are designed to match and fit most H-D shift levers
•Matching rear board covers are also available
•Matches Cyclesmiths’ Banana brake pedal cover PART #DS-254449
1603-0047
PART #
DESCRIPTION
FOR 80-09 FLT, FLHT, FLHS, FLHR AND 86-09 FLST MODELS ORIGINALLY EQUIPPED W/ FLOORBOARDS
DS-254434
181/2” Banana Boards
DS-254435
133/4” Banana Boards
FOR 94-09 FLT, FLHT, FLHS AND FLHR MODELS ORIGINALLY EQUIPPED W/ REAR FLOORBOARDS
DS-254436
Rear board covers
PART #
1603-0047
DESCRIPTION
Banana shifter pedal
SUG. RETAIL
$76.95
PART #
1603-0071
SUG. RETAIL
$311.95
227.95
171.95
DESCRIPTION
Banana shifter peg
SPORT FLOORBOARDS
•Polished billet aluminum construction
•Rubber inlay and rivets match
“Banana Boards” look
•Fully adjustable
•Fits any stock peg mount
PART #
FOR 02-06 VRSCA/B V-ROD
1621-0028
DESCRIPTION
Sport floorboards
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$266.95
MINI BULLET FLOORBOARDS
HARDWARE,
CHEMICALS
& TOOLS
•Precision cast, premium alloy floorboards add
a chrome-plated custom look to your bike
•Replace stock pegs for both passenger and rider
•Standard male clevis mount
COVERS,
SECURITY
& GENERAL
PART #
DESCRIPTION
FOR ALL HD MODELS WITH FOOTPEGS
1621-0056
Rider floorboards
1621-0055
Passenger floorboards
1036
SUG. RETAIL
$185.95
1621-0056
1621-0055
SUG. RETAIL
$200.95
200.95
SECTION
1621-0104
18
1621-0107
1621-0102
WINDSHIELDS
CHROME BILLET FLOORBOARDS
•CNC-machined chrome billet aluminum construction
•Driver and passenger floorboards available
•Available in rectangular and semi-circle styles
•Use OEM hardware
1621-0103
•Sold in pairs
1621-0105
•Matching rear brake pedal, dash covers and saddlebag latch covers available separately
PART #
DESCRIPTION
RECTANGULAR
1621-0102
Driver floorboards for 86-09 FLT, FLHT, FLHR, FLTR, FLST, chrome
1621-0103
Passenger floorboards for 80-09 FLT, FLHT, FLHR, FLTR, chrome
SEMI-CIRCLE
1621-0104
Driver floorboards for 86-09 FLT, FLHT, FLHR, FLTR, FLST, chrome
1621-0105
Driver floorboards for 86-09 FLT, FLHT, FLHR, FLTR, FLST, black
1621-0106
Passenger floorboards for 80-09 FLT, FLHT, FLHR, FLTR, chrome
1621-0107
Passenger floorboards for 80-09 FLT, FLHT, FLHR, FLTR, black
TOURING
1621-0106
SUG. RETAIL
LUGGAGE
$547.95
384.95
499.95
499.95
449.95
449.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ISO™-BOARDS AND ISO™-PASSENGER BOARDS
•Feature super-comfortable ISO™-Ribs that run the full length
of the board
1904-0016
1904-0017
•ISO™-Boards measure 15” overall length and offer several
different foot positions for the driver
•ISO™ Passenger Boards were designed specifically to match the ISO™-Boards
•Sold in pairs
PART #
DESCRIPTION
1904-0016
ISO™-Boards for 86-09 FLST and 83-09 FLT models
1904-0017
ISO™ Passenger Boards for 93-09 FLT and 93-09 FLST models w/ H-D accessory floorboard kits
1621-0027
Male footpeg mounts for PART #1620-0003
ENGINE
1621-0027
SUG. RETAIL
$299.95
189.95
18.95
•Provides better rider comfort by
improving foot and leg positioning
•Five quick adjustment positions to
suit your needs
•Increased leg room improves leg and
knee comfort
•Expanded foot positioning is provided
by 13” length, tapering from 4” wide
1621-0134
1621-0133
down to 23/8”
•Narrowed design allows for greater lean angles without the risk
of touching down
•Polished and chromed billet aluminum construction
•Includes stylized vibration-reducing rubber inlays and replaceable rub
strips and rubber pads
•Easy to install
•Matching passenger ShortBoards available for a great custom look; see right
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-09 FLSTS AND 80-09 FLT/FLHT/FLHR/FLTR MODELS
1621-0133
Solid
$299.95
1621-0134
Enferno
299.95
1621-0129
1621-0129
1621-0130
ADJUSTABLE FL
PASSENGER SHORTBOARDS
•Personalize these adjustable floorboards to
suit your needs
•Choose between 42 different settings
•Provides up to 61/2’ more leg room
•Multiple tilt angles provide stress relief in the thighs, calves and ankles
•Polished and chromed construction
•Comfort and solid foot support is provided by the 81/2” x 31/2” surface
area and vibration-reducing anti-slip rubber pads
•Boards fold up when not in use
•Matching LongBoards are available for a great custom look; see left
PART #
DESCRIPTION
SUG. RETAIL
FOR 93-09 FLT/FLHT/FLHR/FLTR MODELS
1621-0129
Solid
$299.95
1621-0130
Enferno
299.95
SWEPT FRONT AND
REAR FLOORBOARDS
PASSENGER
FLOORBOARD
COMFORT KIT
•Utilizes your stock floorboards
•Choose from six “comfort” positions of height and tilt
•Provides up to 21/2” of additional leg room and widens
the floorboards 11/2” to help ease hip stress
•Relieve calf stress by tilting the rear of the floorboards
•Relaxes your knees to reduce joint stress
•Install and adjust in minutes
DESCRIPTION
93-09 FLT/FLHT/
FLHR/FLTR models
GASKETS
& SEALS
ELECTRICAL
ADJUSTABLE FL
RIDER LONGBOARDS
PART #
1622-0243
TRANSMISSION
& DRIVELINE
SUG. RETAIL
$69.95
•Timeless form, quality and function
606-4100
•Expansive foot resting area with comfortable
606-4600/Down
rubber inserts
•Front floorboards made of stamped steel then chrome plated
and polished to a show-quality finish; use OEM
floorboard mounts
•Rear floorboards made of CNC-machined billet aluminum
then chrome plated and polished to a show-quality finish;
use OEM passenger peg mounts
•Both front and rear floorboard mounts rotate, then you can
606-4600/Up
lock them in the most comfortable riding position
•Quick, easy installation – just bolt them on, adjust them and ride
PART #
DESCRIPTION
SUG. RETAIL
FRONT
606-4100
For all 86-09 Softail models w/ OEM front floorboards
$199.95
606-4100
For all 86-09 Dresser models w/ OEM front floorboards
199.95
REAR
606-4602
For all 00-09 Softail models (except FLSTS/FXSTD/FLSTF)
299.95
606-4604
For all 00-09 Fat Boy models
299.95
606-4600
For all 86-09 Dresser models (except FLHRS/SI)
299.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1037
SECTION
18
WINDSHIELDS
TOURING
DS-254411
LUGGAGE
DS-254413C
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1621-0097
DS-254410
BILLET ALUMINUM FLOORBOARDS
DS-254400
•Machined from 6061 T-6 billet aluminum, then
ball-end milled and triple chrome plated
for a custom look
•Bolts directly on top of stock boards
•Includes all mounting hardware
•Available in a chrome finish
•Sold in pairs
PART #
DESCRIPTION
FOR 86-09 FLT, FLHT, FLHS, FLTR, FLHR AND FLST
DS-254413C
Billet aluminum floorboards
1621-0097
Billet aluminum passenger
floorboard inserts
SUG. RETAIL
$303.95
165.95
FLOORBOARDS
•High-quality replicas of
OEM floorboards
•For stock mounting brackets on
several H-D models
PART #
DS-254411
DS-254410
BOLT-ON
ADJUSTABLE
FLOORBOARDS
DS-254402
•Complete kit; fully
adjustable floorboards
•Allow approximately 7” of fore
and aft adjustment; also offer
foot angle and height adjustability
•All hardware, brackets and
floorboards feature heavy-duty
construction and chrome plating
•Available in Damper style
DS-254409
PART #
DS-254412
DS-254400
DS-254401
DESCRIPTION
For 84-08 FXST, FXSTC, FXSTS and 80-86 FXWG,
plus most bikes w/ clevis-style footpeg mounts
SUG. RETAIL
$124.95
1621-0077
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1621-0076
PASSENGER FOOTRESTS
PASSENGER
FLOORBOARDS
•Billet aluminum construction
with a show chrome finish
•Non-slip rubber pads add
comfort on long rides
•Fold-up design
for added convenience
•Style blends smoothly with the lines of your bike
•Measure approximately 61/4” L x 31/2” W
•Sold in pairs
•Fit on lower frame tube
and mount at the frame
•Come complete with
rubber pads; mounting
hardware not included
•Sold in pairs
NOTE: May require some spacing on custom exhaust applications.
NOTE: Not for kickstart models.
PART #
DESCRIPTION
FOR 58-85 FX, FL AND 80-86 FXWG
DS-720265
Chrome passenger floorboards
DS-720270
Repl. rubber pads (pr.)
SUG. RETAIL
$54.95
12.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1038
DESCRIPTION
SUG. RETAIL
Floorboards w/ damper for 80-09 FLT, FLHT; 86-09
FLSTC; 90-09 FLSTF, FLSTN; repl. OEM #50621-79A
$61.95
Floorboards w/ damper for 66-84 FL, FLH;
71-72 FX; repl. OEM #50603-74A (pr.)
69.95
Repl. rubber pad w/ dampers for driver
floorboards for 91-09 FLT, FLHT and 91-09 FLSTC,
FLSTF, FLSTN; repl. OEM #50614-91 (ea.)
25.95
Repl. rubber only for floorboards w/ damper for
DS-254411, DS-254410; repl. OEM #50614-66 (pr.)
10.95
Moon floorboards for 41-65 FL (pr.); repl. OEM
#50603-40 (will also fit 66-84 FL)
49.95
Repl. rubber for moon floorboards (pr.); repl.
OEM #50614-40
10.95
1621-0077
1
DESCRIPTION
For Softail-style frames w/ 1/2”
mounting holes
For 99-09 FLHT, FLHR, FLTR
SUG. RETAIL
$241.95
286.95
Requires drilling two holes for dowel pins that prevent footrests from
rotating after installation; instructions and template included.
FLOORBOARD EXTENSION KIT
PASSENGER CRUISE
BOARD KIT
•These spacer kits space out your floorboards
an extra .8”
•Provides more room away from the pipes
on the right and the shifters on the left
•Allows full floorboard use instead of just the
outer half; increases comfort and security
•Kit includes stainless steel bolts and
powder-coated aluminum spacers
•High-quality chrome passenger
cruise boards with heavy-duty
rubber pads
•Allow 360° rotation for
personalized mounting
•Mounting hardware included
•Measure 4” W x 6” L
PART #
1621-0049
PART #
1621-00761
DESCRIPTION
For Dyna Glide, FXD, FXL, FXRS and VRSCA/B
SUG. RETAIL
$187.95
PART #
1621-0071
DESCRIPTION
For 97-09 FLT/FLHT/FLHR/FLTR
SUG. RETAIL
$39.95
SECTION
18
1621-0099
WINDSHIELDS
TOURING
LUGGAGE
PASSENGER
FLOORBOARD EXTENDERS
DRIVER FLOORBOARD EXTENSION KITS
•Moves factory floorboards forward 2”
•Provides extra leg room and comfort for taller riders
•Relocation brackets and all mounting hardware included
PART #
DESCRIPTION
FOR 83-08 FLT MODELS
1621-0099
Black
1621-0100
Chrome
SUG. RETAIL
$151.95
171.95
•Extenders move the passenger floor boards out 1”
•Work great on stock motorcycles to give the passenger increased
comfort; necessary when using oversized primary covers such
as the Barnett billet aluminum cover
•These extenders are made of highly polished billet aluminum and
include instructions
PART #
DESCRIPTION
SUG. RETAIL
1621-0069
For 93-09 FLT, FLHT, FLHR and FLTR models
$61.95
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
DS-254442
ENGINE
TRANSMISSION
& DRIVELINE
MINI-FLOORBOARDS
•8” L x 31/2” W x 3/8” thick billet
aluminum mini-floorboards have rotating
male mounts to fit almost any H-D front
or rear application
•Chrome finish, rubber cushions and all hardware included
PART #
DESCRIPTION
DS-254442
Mini-floorboards, male mount
DS-254423
Repl. rubber inserts (8)
DRIVER
FLOORBOARD
EXTENDERS
•Moves the floorboards outward 11/4”
•Provide greater comfort by moving the
legs away from the gas tank and engine heat
•Kit is easy to install using stainless hardware
•Spacers have a black finish
•Compatible with fairing lowers, but not with centerstand
PART #
DESCRIPTION
1621-0098
For 93-08 FHLR and FLHT models
GASKETS
& SEALS
SUG. RETAIL
$218.95
16.95
ELECTRICAL
1811-1111
LIGHTING
1621-0026
SUG. RETAIL
$51.95
HANDLEBARS,
CONTROLS
& MIRRORS
DS-253586
ISO™-WING
MINI BOARDS
CABLES
•Greater surface area
than any other pegs
•Sleek lines and thin profiles
permit use in a variety of applications
for driver or passenger
•Available with male mounts
•Sold in pairs
PART #
DESCRIPTION
DS-253586
ISO™-Wing mini boards
1620-0179
Repl. rubber pads (set of 8)
DS-253337
MINI FLOORBOARDS
SUG. RETAIL
$99.95
19.95
1811-2000
•Chrome-finished billet aluminum
•With male mount
•Sold in pairs
PART #
DESCRIPTION
1621-0026
Maltese Cross w/ rubber inlay
DS-253337
Elite cutout
1811-1111
Elite w/ rubber inlay
1811-2000
Elite w/ rubber inlay and 3” mounting stud
BRAKES
SUG. RETAIL
$165.95
220.95
165.95
231.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
MINI
FLOORBOARDS
•Die-cast construction with
chrome-plating and non-slip rubber matting
•Replace male clevis mount footpegs;
supplementary mounting holes allow
floorboards to rotate 15° for the perfect
riding position
•Measure 4” x 8”
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
1621-0101
Mini floorboards
$52.95
PORK CHOP FOOT PADS
MINI FLOORBOARDS
•Chrome finish with Rail-style
raised rubber inserts
•1/2” male mount
•Sold in pairs
PART #
DESCRIPTION
1620-0388 Mini
floorboards
SUG.
RETAIL
$137.95
•Unique pads look and work great
•6061 T-6 billet aluminum construction
with faceted edges and rubber pads
•Use as peg replacements or as footrest when used with
highway pegs
•Design allows the pads to be angled to rider’s preference
•Measure 7” L x 41/2” W
PART #
PRK-790
DESCRIPTION
Pork chop foot pads
SUG. RETAIL
$199.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1039
SECTION
18
WINDSHIELDS
1621-0078
TOURING
1621-0079
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FLOORBOARD “MINI-SKIRTS”
•Black, ABS plastic insert smoothes out and covers the
underside of your stock or streamliner floorboards
•Add paint or leave them black
•Easy installation – snap into place, held securely with 3M tape
•Sold in pairs
PART #
DESCRIPTION
•Give the stock floorboards
a custom look
•Highly polished chrome-plated steel
skirts cover the lower section of the floorboard
•Easy to install; mount between the rubber isolators
and the upper floorboard and include instructions
•Sold in pairs
SUG. RETAIL
FOR 80-09 FLT, FLHT (EXCEPT FLHRS, FLHX); 86-09 FLST (EXCEPT 05-09 FLSTN,
08-09 FLSTB, 09 FLSTC)
1621-0078
For streamliner floorboards
1621-0079
For stock floorboards
Right
Left
UNDERCOVERS
$74.95
PART #
DESCRIPTION
1904-3002
For 80-09 FLT, FLHT (except FLHTRS, FLHX), 86-09 FLST (except
05-09 FLSTN, 08-09 FLSTSB, 09 FLSTC) and 90-09 FLSTF
74.95
SUG. RETAIL
$42.95
FUEL/AIR
SYSTEMS
ENGINE
GASKETS
& SEALS
ELECTRICAL
SUG.
RETAIL
DESCRIPTION
1621-0123
For 87-09 FLT and
86-09 FLST w/ OEM
D-shaped passenger
floorboards; repl. OEM
#50782-91
LIGHTING
ZOMBIE™
FLOORBOARD COVERS
FLOORBOARD SKINS
•Chrome-plated steel covers
•Install using supplied chrome
self-tapping screws
•Smooth, clean styling
•Sold in pairs
PART #
1621-0122
1621-0121
1621-0121
TRANSMISSION PASSENGER
& DRIVELINE FLOORBOARD COVERS
•Sculpted black rubber pads with
a chromed inlay
•Pad shape is designed to help keep
boots off exhaust pipes
•Pads sold in pairs
•CNC-machined from
6061 T-6 billet aluminum
•Chrome finish
•Sold in pairs
PART #
DESCRIPTION
DS-254444
For most rectangular
floorboards from 40 to
present (except 05-09
FLSTN, 08-09 FLSTSB, 09
FLSTC and FLHRS, FLHX)
$49.95
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
FOR 80-09 FLT, FLHT, FLHR, FLTR (EXCEPT 04-09 FLHTCSE, FLHTCUSE,
FLHRSE, FLHRS, FLHX) AND 86-09 FLST (EXCEPT 05-09 FLSTN, FLSTFSE,
08-09 FLSTSB AND 09 FLSTC)
$271.95
1621-0121
Driver floorboard covers
1621-0122
Passenger floorboard covers
$199.95
99.95
1621-0058
HANDLEBARS,
CONTROLS
& MIRRORS
1621-0060
1621-0057
1621-0057
1621-0059
CABLES
PASSENGER FLOORBOARD GUARDS
•Prevent boot heels from touching the hot exhaust pipe
•Highly-polished stainless-steel guards will also dress up your stock floorboards
BRAKES
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-09 DRESSERS (EXCEPT FLHRS, FLHX)
TANKS &
OIL FILTERS
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-09 SOFTAIL MODELS (EXCEPT 05-09 FLSTN, 08-09 FLSTB, 09 FLSTC)
1621-0057
Combination heel and interior guard set
1621-0059
Interior edge guard set only
$75.95
1621-0058
Combination heel and interior guard set
65.95
1621-0060
Interior edge guard set only
$75.95
65.95
1621-0053
DASHES
& GAUGES
1621-0054
FRAMES,
SUSPENSION
& FENDERS
1621-0054
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1040
1621-0052
1621-0052
1621-0053
1621-0053
DRIVER FLOORBOARD GUARDS
•Prevent your boot heels from melting on the hot exhaust pipe
•Highly-polished stainless-steel guards will also dress up your stock floorboards
•Allow you to keep your eyes safely on the road ahead instead of looking down to see if your heel
is too close to the exhaust pipe
•Full-right/modified left set comes with a left-side guard height that has been modified
by 1/4” to not impede heel shifter
PART #
DESCRIPTION
SUG. RETAIL
FOR 84-09 HD MODELS WITH FLOORBOARDS (EXCEPT FLHRS, FLHX,
05-09 FLSTN, 08-09 FLSTSB, 09 FLSTC)
1621-0053 Full-size right guard/full-size left guard set
1621-0054 Full-size right guard/modified-size left guard set
PART #
DESCRIPTION
FLOORBOARD
ISOLATION DAMPERS
•Sold in 8-pack
SUG. RETAIL
FOR 84-09 HD MODELS WITH FLOORBOARDS (EXCEPT FLHRS, FLHX,
05-09 FLSTN, 08-09 FLSTSB, 09 FLSTC) (CONT)
$96.95
1621-0052 Single right-side only guard
96.95
$53.95
PART #
DESCRIPTION
DS-253006
For 74-91 FL, FLT
and FLST; repl.
OEM #50620-74
SUG.
RETAIL
$5.95
SECTION
18
DS-253591
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
DS-253591
FUEL/AIR
SYSTEMS
ADJUSTABLE HIGHWAY PEG MOUNT
•Features black-finished mounting brackets and
chrome footpeg arms and clevices
•Footpeg mount arms are adjustable and can
be mounted in three pre-set positions to match the rider height and
preferred riding position
•Footpegs not included; accepts most male mount pegs
•Includes all required mounting hardware; visible hardware
is chrome-plated
PART #
1624-0124
DESCRIPTION
For 04-08 XL
SUG. RETAIL
$159.95
DS-243524
ENGINE
TRANSMISSION
& DRIVELINE
THE CHROME MUSTACHE™
•Chrome bar with small ISO™-Pegs that allows
you to stretch out on those long hauls
•Easy installation and fit make this
a must-have item
GASKETS
& SEALS
NOTE: Not recommended for 85-99 FXST or any FXDWG due to the close
proximity of the peg to the brake pedal.
PART #
DS-253590
DS-253591
DS-253592
DESCRIPTION
For 00-09 FXST/FLST
For 86-99 FLST
For 91-05 FXD
SUG. RETAIL
$179.95
179.95
179.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
DS-253696
DS-253699
BRAKES
DS-253698
DS-243625
TANKS &
OIL FILTERS
DASHES
& GAUGES
“RAIL” FOOT AND
SHIFTER PEGS
MOTOR MOUNT HIGHWAY BARS
•Drag’s assortment of chrome-plated highway
bars are engineered for comfortable highway
cruising and good looks
•Come complete with 1/4” steel mounting plates; refer to footpeg pages
for styles
NOTE: Footpegs are sold separately to ease dealer inventory and let
buyer customize his purchase.
NOTE: The kit for L84-03 XL comes without mounting plates.
Use PART #DS-243516.
PART #
DS-243524
DS-243625
APPLICATION
BAR LENGTH STYLE
Female mount
91-09 Dyna Glide 33/8”
L84-03 XL
61/4”
Female mount
SUG. RETAIL
$59.95
39.95
•Another unique design
from Drag and Arlen Ness
•Protective rubber rails run completely
around diameter for great looks no
matter how pegs rotate or pivot
•Each is precisely die-cast,
chrome-plated aluminum
•End cap is super-clean and uses a grade
DS-253696
8 countersunk flat-head socket screw
•Very tight tolerances ensure a greatquality, superstrong footpeg assembly
•Carbon-steel pivot ends are stronger than other die-cast pivots
•Peg diameter is 1.5” (between a standard large-size driver and the smaller
passenger-style pegs); length is 4” without pivot end
•Shifter peg matches footpegs
•Sold in pairs with pivot ends installed
PART #
DS-253699
DS-253696
DS-253698
DS-253700
DESCRIPTION
“Rail” pegs w/ large female mount
“Rail” pegs w/ male mount
“Rail” shifter peg (ea.)
Small dia. (11/4”) “Rail” footpegs (pr.)
w/ 1/2 male mount
SUG. RETAIL
$58.95
53.95
16.95
38.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1041
SECTION
18
WINDSHIELDS
TOURING
LUGGAGE
FOOT PEGS
•Features polished and chrome-plated
die-cast construction
•Knurled nylon insets for style and durability for
all-day riding
•Matching shift peg PART #1603-0053 available
separately; see at right
•Matching grips PART #0630-0372 available
separately; see page 752
•This unique foot peg style is only available from
Drag Specialties
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
SKULL FOOTPEGS
•Billet construction with a chrome-plated finish
•Rubber skull inserts
•Male-mount design
•Sold in pairs
PART #
1620-0466
DESCRIPTION
Skull footpegs (pr.)
DS-253500
SUG. RETAIL
$89.95
PART #
1620-0377
DS-253501
DESCRIPTION
Chrome-plated
footpegs (pr.)
SUG. RETAIL
$59.95
DS-253506
SHIFT PEG
•Features polished and chrome-plated
die-cast construction
•Knurled nylon insets for style and durability for
all-day riding
•This unique shift peg style is only available from
Drag Specialties
•Matching footpegs and grips
available separately
PART #
DESCRIPTION
1603-0053 Chrome-plated shift
peg (ea.)
$24.95
DS-253743
DS-253505
TRANSMISSION
& DRIVELINE
SUG. RETAIL
DS-253510
GASKETS
& SEALS
DS-253503
DS-253507
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
SOFT-RIDE FOOTPEGS
AND SHIFTER PEGS
DS-253515
DS-253517
•Designed to absorb vibrations
•Hollow core, long-lasting neoprene rubber
insert cleats are isolastically mounted on a special chrome
socket-head bolt
•Shifter peg and all replacement components are also available
•For most Harley models
PART #
DESCRIPTION
SUG. RETAIL
DS-253500 Soft-ride large dia. peg w/ male mount (pr.)
$37.95
DS-253501 Soft-ride large dia. footpeg w/ large female
mount (pr.)
37.95
33.95
DS-253506 Soft-ride small dia. peg w/ 5/8” female mount (pr.)
DS-253505 Soft-ride small dia. peg w/ male mount (pr.)
33.95
DS-253510 Soft-ride shifter peg (ea.)
11.95
DS-253330
DS-253340
PART #
DS-253743
DS-253503
DS-253507
DS-253515
DS-253516
DS-253517
DESCRIPTION
Extended Soft-ride 31/4” shifter peg (ea.)
Soft-ride male mounts (pr.)
Soft-ride small 5/8” female mount (pr.)
Soft-ride repl. rubber, large peg (8-pk.)
Soft-ride repl. rubber, small peg (8-pk.)
Soft-ride repl. shifter peg rubber (set)
SUG. RETAIL
$10.95
10.95
9.95
7.95
7.95
2.95
DS-253342
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-253017
DS-253410
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1042
DS-241010
SUNDANCE® FOOTPEGS
DS-253400
•Highly chromed custom footpegs have
neoprene O-rings and are used for many applications
•Matching shift peg sold separately
PART #
DS-253330
DS-253340
DS-253342
DS-253410
SUG.
DESCRIPTION
RETAIL
5/8” female mount footpegs $30.95
Small male mount footpegs
30.95
5” male mount footpegs
39.95
Large male mount footpegs
39.95
PART #
DS-253400
DS-241010
DESCRIPTION
Large female
mount footpegs
Shifter peg
SUG.
RETAIL
$34.95
8.95
NEOPRENE O-RINGS
FOR SUNDANCE® PEGS
•Replacements for original Sundance
neoprene O-rings
SUG.
PART #
DESCRIPTION
RETAIL
3
DS-241015 /4” O-rings for kick pedals
and shift pegs (12-pk.)
$2.95
DS-253017 7/8” O-rings for highway and
passenger pegs (10-pk.)
3.95
DS-253019 1” O-rings for large driver
pegs and flat kick pedal
(10-pk.)
5.95
SECTION
18
WINDSHIELDS
DS-253546
DS-241050
DS-241065
DS-253547
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
DS-241061
FUEL/AIR
SYSTEMS
DS-253541
RUBBER REPLACEMENT DRIVER FOOTPEGS
AND SHIFTER PEG
CHROME ADJUSTABLE
DESIGNER FOOTPEGS
•Rubber driver pegs with zinc-plated steel inserts
PART #
DESCRIPTION
DS-241065
Rubber driver pegs; repl. OEM #50939-52 (pr.)
DS-241060
Repl. rubber footrest cover for 41-85 FL, FLH,
FX, FXE (not FXWG, FXST, FXR); 52-90 XL;
repl. OEM #50940-52 (ea.)
DS-241050
Rubber shifter peg; repl. OEM #34611-65 (ea.)
DS-241061
Repl. driver footrest cover;
repl. OEM #50646-82 (ea.)
•Choose from two styles of heavy steel footpegs
•Durable rubber pad inserts in several designs
•Footpegs feature 180° internal splines allowing pegs to be mounted
at many different angles
•Footpeg mounts have four engagement locking teeth to hold pegs
in place
•Footpegs and mounts are sold separately (in pairs)
DS-253408
SUG. RETAIL
$19.95
5.95
3.95
6.95
DS-253403
DS-253543
NOTE: Use of a thread-locking product is recommended on all
mounting bolts.
SUG.
PART #
DESCRIPTION
RETAIL PART #
DESCRIPTION
DESIGNER FOOTPEGS
FOOTPEG MOUNTS
DS-253546 Rail
$53.95 DS-253541 Male mount
DS-253547 Flamed
53.95 DS-253543 Small female
mount
ENGINE
TRANSMISSION
& DRIVELINE
SUG.
RETAIL
$24.95
GASKETS
& SEALS
ELECTRICAL
27.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
STUD MOUNT
FOOTPEGS
RUBBER VIBRATION-ABSORBING
PASSENGER FOOTPEGS
•OEM-style passenger footpegs available in standard or
extended (5”) length
•All have small male mounts and are finished with chrome end caps
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
DS-253408
Standard
$22.95
DS-253403
Extended length
38.95
DS-253404
DS-253405
•A chromed 3/4”
square steel block
with 3/8”-24 thread
is included for
custom frame
tab mounting
•Also screw onto
the lower shock
mounts of pre-72
Harley models
PART #
DESCRIPTION
DS-253320
Sundance stud mount footpegs
CABLES
BRAKES
SUG. RETAIL
$27.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
DS-253406
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-253407
TIRES,
TUBES &
WHEELS
CHROME FOOTPEGS WITH RUBBER SLEEVES
•Die-cast construction, rubber sleeves and highly polished chrome ends
•Feature the styling of our Sundance® pegs, but with molded rubber
sleeves rather than O-ring grooves
•Sold in pairs unless noted
PART #
DESCRIPTION
SUG. RETAIL
DS-253404
4” rubber footpegs w/ large female mounts
$37.95
DS-253405
Rubber footpegs w/ small female mounts
23.95
DS-253406
Rubber footpegs w/ male mounts
26.95
DS-253407
Rubber shift peg (ea.)
8.95
CLAMP MOUNT FOOTPEGS
HARDWARE,
CHEMICALS
& TOOLS
•Includes chromed 1” and 11/4” steel clamps; designed for clamping pegs
to frames or safety bars
PART #
DESCRIPTION
SUG. RETAIL
DS-253300
Sundance clamp-mount footpegs
$27.95
COVERS,
SECURITY
& GENERAL
1043
SECTION
18
“POPSICLE” FOOTPEGS WITH O-RINGS
•Die-cast, diamond-shaped and highlighted by a black paint outline
•Mount to any 1” dia. engine guard or frame and comes complete with a three-piece
tube clamp for easy mounting
•Unique design won’t pinch the ankle like a round peg can
•Sold in pairs; O-rings included
PART #
DESCRIPTION
DS-253800
Flat footpegs
DS-253019
Repl. O-rings, 1” x 3/32” (10-pk.)
WINDSHIELDS
TOURING
LUGGAGE
1904-6453
SUG. RETAIL
$54.95
1.95
1904-6452
1904-1764
SEATS &
SISSY BARS
FOOTPEGS WITH RUBBER INLAY
•Fold-up design with a chrome finish
•Available in male-mount, bolt-on and
U-clamp style
•Sold in pairs
EXHAUST
FUEL/AIR
SYSTEMS
PART #
1904-6453
1904-6454
1904-6452
1904-1764
1904-6454
DESCRIPTION
Straight male mount
45° male mount
Bolt-on (5/16” mount bolts)
U-clamp (fits 1”-1 1/4” tube)
SUG.
RETAIL
$29.95
29.95
19.95
19.95
ENGINE
TRANSMISSION
& DRIVELINE
1620-0181
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
HIGHWAY PEGS
FOR FORWARD
CONTROL
MODELS
•Arms are adjustable
so you can fine-tune
the footpeg location
•Chrome-plated finish
•Accept any H-D male-mount style footpegs in the highway peg position
•Compatible with stock forward controls
•Recommended for use by riders with inseam of 34” or longer
•Require the use of Küryakyn footpegs
PART #
DESCRIPTION
SUG. RETAIL
1622-0147
Highway pegs for forward control models
$159.95
1603-0010
TANKS &
OIL FILTERS
DASHES
& GAUGES
1610-0020
1610-0020
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
COVERS,
SECURITY
& GENERAL
1044
CRUISE ARM MARK III
•One of Küryakyn’s most popular accessories
•Offers a wide range of adjustment for comfort on the road
•Adjustment range is limited when engine guards are installed
•Entire assembly mounts to the floorboard; reinforcing plate adds
stiffness to the floorboards to keep flex to a minimum
•Installation requires drilling mounting holes in the steel floorboard base
for the adjustable mount and floorboard reinforcing plate – stock rubber
floorboard pads are not affected
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-06 FLST (EXCEPT 05-06 FLSTN AND 05 FLSTFSE) AND
84-06 FLHT/FLHR MODELS W/O FAIRING LOWERS
(EXCEPT 04-05 FLHTCSEI AND 04-06 FLHRS)
1620-0181
Cruise Arm Mark III
$189.95
1620-0182
Cruise Arm Mark III w/ small ISO™-Pegs
219.95
1620-0180
1620-0180
1603-0010
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
1620-0181
1620-0424
1610-0020
STILETTO STIRRUPS
STILETTO PEGS
•For those who ride on the wild side
•Install on any model using male-mount pegs
PART #
DESCRIPTION
1620-0180
Stiletto pegs, male mount (pr.)
1603-0010
Shift peg (ea.)
1610-0020
Brake pedal pad for FXST, FXDWG and Küryakyn
forward controls
SUG. RETAIL
$99.95
26.95
29.95
•Combines the flair of our Stiletto
pegs with a comfortable stirrup
heel rest
•Built-in heel guard keeps boot
heels from scuffing the bike
•Sold in pairs
PART #
DESCRIPTION
1620-0424
Stiletto stirrups w/ pegs (pr.)
1620-0428
Stiletto stirrups w/o footpegs (pr.)
1620-0424
SUG. RETAIL
$169.95
89.95
SECTION
18
WINDSHIELDS
SWITCHBLADE™ FOOTPEGS
TOURING
•Comfortable, versatile and sleek
•Large-surface-area, rubber-isolated footpeg
•Concealed heelrest can be deployed to add the
comfort of Küryakyn ISO™-Stirrups
•Best for use on bikes with forward controls or
forward-mounted footpegs; will work in any
peg location
•Heel rests have curb feeler tabs to protect the
pegs when cornering
•Sold in pairs
PART #
1620-0437
DESCRIPTION
Switchblade pegs (pr.)
LUGGAGE
Shown with
heelrest
deployed
Shown with
heelrest
closed
SEATS &
SISSY BARS
SUG. RETAIL
$129.95
EXHAUST
DS-253585
DS-253583
FUEL/AIR
SYSTEMS
ENGINE
DS-253582
TRANSMISSION
& DRIVELINE
PILOT™ PEGS
ISO®-SWEPTWING PEGS
•Simple, stylish design adds a sleek, streamlined look
to your bike
•Feature the traditional ISO® design to reduce
vibration and provide long-distance comfort
•Sold in pairs
PART #
1620-0369
DESCRIPTION
ISO®-SweptWing pegs w/
male-mount ends (pr.)
SUG. RETAIL
$89.99
•Flowing teardrop male mount pegs
add a unique custom look to any bike
•Available with and without stirrups
•Stirrup style has a guard to prevent
your heel from melting on the front
exhaust pipe
PART #
DS-253582
DS-253584
DS-253583
DS-253585
DS-253584
GASKETS
& SEALS
DESCRIPTION
Pilot pegs (pr.)
Pilot pegs w/ stirrups (pr.)
Pilot shift peg (ea.)
Pilot brake pedal pad for FXST, FXDWG or Küryakyn forward controls
SUG. RETAIL
$69.95
129.95
18.95
29.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
KAISER™ PEGS
•The ultimate chopper footpeg
•Maltese Cross insert with spire pointed end for
that old-school custom look
•Rubber pad inserts add comfort and isolate the
foot from vibration
•Sold in pairs
PART #
1620-0367
DESCRIPTION
Kaiser pegs w/
male-mount ends
SUG. RETAIL
$99.95
BRAKES
WIDOW
PEGS
1603-0073
1611-0015
•Full custom footpeg design
•Ominous black widow design nestled in the rubber pads
PART #
1611-0015
1603-0073
DESCRIPTION
Widow pegs w/ male-mount ends (pr.)
Widow shift peg (ea.)
SUG. RETAIL
$99.95
24.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
ZOMBIE™
PEGS
•Flame design adds timeless style
•Rubber flame inserts provide comfort and help
isolate the foot from vibrations
•Sold in pairs
•Feature a sinister
spire point and
a skull nestled
between the rubber pads
•Sturdy, rugged pegs design
•Include male-mount ends
•Sold in pairs
PART #
1620-0365
PART #
1620-0277
FLAMIN’ PEGS
DESCRIPTION
Flamin’ Pegs w/
male-mount ends
SUG. RETAIL
$99.95
DESCRIPTION
Zombie footpegs w/
male-mount ends
SWINGWING PEGS
SUG. RETAIL
$99.95
Secondary peg
extended
•A convenient alternative
to forward controls
•Our clever cruise peg
features a fold-forward design
•Secondary fold-out peg extends
3” forward and locks into place for added
legroom and comfort
•Sold in pairs
PART #
1611-0014
DESCRIPTION
SwingWing pegs (pr.)
SUG. RETAIL
$159.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1045
SECTION
18
WINDSHIELDS
RETRO™ PEGS
•Combine the classic comfort of ISO™-Pegs with updated styling
•The body of the peg has a thin profile that looks great on any machine
•Most of the interchangeable mounts for the ISO™-Pegs will work for the
Retro™ Pegs
TOURING
LUGGAGE
DS-253581
PART #
DS-253578
DS-253581
DS-253579
DS-253578
SEATS &
SISSY BARS
DS-253580
1620-0422
1603-0072
1611-0022
DS-253580
EXHAUST
DS-253579
DESCRIPTION
Retro pegs w/ male mount (pr.)
Retro pegs w/ ISO™-stirrup (pr.)
Retro brake pedal pad for FXST, FXDWG or
Küryakyn forward controls (ea.)
Retro shift peg (ea.)
Repl. pads for Retro pegs (4-pc.)
Repl. pads for Retro shift peg (2-pc.)
Repl. pads for Retro brake pedal pad (2-pc.)
DS-241103
DS-253595
FUEL/AIR
SYSTEMS
SUG. RETAIL
$69.95
99.95
29.95
18.95
13.95
7.95
9.95
DS-241105
ENGINE
TRANSMISSION
& DRIVELINE
DS-241101
DS-241106
DS-241104
GASKETS
& SEALS
ELECTRICAL
LIGHTING
DS-241102
ISO™-PEGS AND SHIFT PEGS
1620-0426
•Give you a custom look and dampen vibration to boot!
•Interchangeable ends allow use on early- or late-style footpeg mounts
•Hollow-core neoprene inserts are long lasting
•Small peg measures 11/4” in diameter x 45/8” long
•Large peg measures 11/2” in diameter x 47/8” long
•Longhorn peg measures 11/4” in diameter x 53/4” long
•Dually peg measures 21/2” wide x 5” long
•Matching pegs, brake pedal pads and stirrups are available separately
1620-0427
1621-0027
NOTE: ISO™-Pegs components are not compatible with other footpegs such as the Soft-Ride style.
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
PART #
DESCRIPTION
SMALL ISO™-PEGS
DS-241101 Male mount (pr.)
DS-241102 5/8” female mount (pr.)
LARGE ISO™-PEGS
DS-241104 3/4” female mount (pr.)
LONGHORN ISO™-PEGS
SUG. RETAIL
$44.95
44.95
45.95
44.95
49.95
PART #
DESCRIPTION
SUG. RETAIL
DUALLY ISO™-PEGS
DS-253595 Male mount
$69.95
SHIFT PEGS
DS-241105 Std. shift peg (25/8” L)
15.95
DS-241106 Longhorn shift peg (31/4”)
16.95
DS-241114 Small peg rubbers (8-pk.)
10.95
DS-241115 Large peg rubbers (8-pk.)
11.95
PART #
DESCRIPTION
SUG. RETAIL
REPLACEMENT COMPONENTS (CONT)
DS-241116 Shift peg rubbers (4-pk.)
$6.95
1621-0027 Male peg mount (pr.)
18.95
1620-0426 Female mounts for
“bullet” mounts (pr.)
9.95
1620-0427 Female mounts for 5/8”
square mount (pr.)
9.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
1620-0128
DS-241108
FOOTRESTS ISO™-STIRRUPS
•Add a heel rest to the popular ISO™-Peg system
& LICENSE •Give you floorboard comfort without the bulk
PLATE FRAMES •Available with two styles of footpegs, or without footpegs to
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1046
1620-0188
DS-241123
upgrade your existing ISO™-Peg system
•Replacement components also available
PART #
DS-241108
1620-0128
DS-241109
DS-241110
DS-241114
DS-241115
DS-241121
DS-241123
DS-241124
DESCRIPTION
W/o peg male mount (pr.)
W/ Dually pegs male mount (pr.)
W/ large peg, male mount (pr.)
W/ small peg, male mount (pr.)
Repl. small peg rubbers (8-pk.)
Repl. large peg rubbers (8-pk.)
Repl. stirrup pads (pr.)
Repl. stirrup arm and pad (ea.)
Repl. stirrup end, male mount (ea.)
SUG. RETAIL
$89.95
129.95
109.95
109.95
10.95
11.95
9.95
24.95
21.95
DS-241124
ISO™-STIRRUPS
•Now you can add the comfort of ISO™-Stirrups to your
H-D or other style custom footpegs
•Simply remove the standard mount and replace it with
this stirrup assembly
•For use with male-mount style footpegs
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
1620-0188 For use with H-D Aileron (OEM #s
50305-02, 50916-90T or 50915-90T)
or Airfoil (OEM #s 50134-95,
50133-95, 50474-03, 43280-01, 50131-95
or 50130-95) accessory footpegs
$99.95
1620-0189 For use with H-D Flame, Diamond
or Skull accessory footpegs (OEM #s
50312-03, 50506-04 or 50370-04)
99.95
SECTION
18
WINDSHIELDS
ADJUSTABLE
PASSENGER PEGS
FOR FLT
TOURING
1620-0001
•Bolt action locking device
on the swingarm adds two
intermediate positions
•Revised mounting system
allows easier installation and
better fit on newer models
•Do not interfere with floorboard operation
•Motorcycles equipped with Rinehart True
Dual Exhaust require PART #1621-0075 (sold
separately), extended left-side passenger
board mount
SUG.
PART #
DESCRIPTION
RETAIL
DS-253587 Adjustable passenger
pegs for 93-09 FLT
$189.95
1621-0075 Extended left side
passenger board mount
69.95
1620-0001
ADJUSTABLE
PASSENGER PEGS
DS-253587
•Provide five locking
positions for alternative
footrest placement
•Easy one-bolt installation
•Include small ISO™-Pegs on
retractable arms
•Footpegs for female mounts must
1620-0004
be purchased separately
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
1620-0001 For 86-09 FXST, FLST models (except FXSTD, FLSTF FLSTN
and FLSTS w/ OEM exhaust or cross-over exhaust systems) $189.95
1620-0004 For 02-05 FXD/FXDWG models
189.95
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
1620-0185
1620-0185
1620-0186
1624-0036
1624-0035
LONGHORN OFFSET DUALLY HIGHWAY PEGS
UNDERSEAT PEGS
•Give passengers the chopper-style riding position right out of the 60s
•Work great for smaller passengers
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
FOR 86-05 FXST, 86-07 FLST (EXCEPT FXSTD, FLSTFSE AND 07 FLSTF)
1620-0185
Mounts w/ small ISO™-Pegs
$119.95
1620-0186
Mounts w/o pegs
89.95
•Combine our most popular highway peg components into one
easy-to-install product
•Provide long-haul comfort
•Available with 1” or 11/4” quick clamps, install on engine guards
•Fully adjustable
SUG.
PART #
DESCRIPTION
RETAIL
1624-0035 Longhorn offset dually ISO™-Pegs w/ 11/4” clamp (pr.) $139.95
1624-0036 Longhorn offset dually ISO™-Pegs w/ 1” clamp (pr.)
149.95
•These pegs offer an incredible amount
of adjustability
•Entire assembly can be moved up or down on the
engine guard
•Arm of the footpeg can be further adjusted along
a vertical or horizontal arc
•Unique clevis permits angle adjustment of
the footpeg
•Recommended for use on Touring models, FLSTC
model or any bike that has 11/4” dia. engine guards
•Work great with fairing lowers
•All feature the 11/4” Magnum Quick Clamp for quick,
easy installation
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
OFFSET MOUNTS WITH QUICK CLAMPS
1620-0129
Small ISO™-Pegs
$119.95
1620-0130
Large ISO™-Pegs
129.95
1620-0131
Dually ISO™-Pegs
139.95
CLEVIS MOUNT WITH QUICK CLAMPS
1620-0132
Small ISO™-Pegs
89.95
1620-0133
Large ISO™-Pegs
99.95
1620-0134
Dually ISO™-Pegs
129.95
1620-0135
ISO™-Wings
139.95
ISO-STIRRUPS WITH MAGNUM QUICK CLAMPS
1620-0136
Small ISO™-Pegs with
ISO™ Stirrups
159.95
1620-0137
Large ISO™-Pegs with
ISO™ Stirrups
159.95
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
1620-0133
1620-0129
TOUR-TECH™ CRUISE MOUNTS
GASKETS
& SEALS
CABLES
1620-0130
1620-0134
BRAKES
1620-0131
1620-0132
1620-0135
TANKS &
OIL FILTERS
DASHES
& GAUGES
1620-0136
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
1620-0137
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
FOOTPEG ADAPTERS FOR BIG DOG
•For use with most Küryakyn footpegs
•Sold in pairs
PART #
DESCRIPTION
1620-0433
For 04-07 Big Dog
SUG. RETAIL
$29.95
COVERS,
SECURITY
& GENERAL
1047
SECTION
18
1603-0088
WINDSHIELDS
1603-0087
1620-0056
TOURING
1620-0523
LUGGAGE
1620-0522
1620-0406
SEATS &
SISSY BARS
1603-0001
1620-0403
DS-253691
EXHAUST
FUEL/AIR
SYSTEMS
1603-0064
1603-0061
DS-253692
ENGINE
1620-0054
DS-253701
TRANSMISSION
& DRIVELINE
DS-253717
GASKETS
& SEALS
1603-0019
DS-253703
DS-2553718
ELECTRICAL
1620-0439
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1048
DS-253733
DS-253720
LIGHTING
1603-0070
DS-253727
DS-253735
NESS-TECH® FOOTPEGS
AND SHIFT PEGS
•Machined from 6061 T-6 billet
aluminum; available in chrome
or black anodized
•Footpegs are available with
male mounts
•Matching shift pegs
sold separately
STYLE
Deep Cut, chrome
Deep Cut, black
Torpedo
Rocket
Retro
10-band
Twister
Twister, black
Diamond Twister w/ flat bands
Knurled
Knurled, flare tip
Grooved
Grooved, black
Flamed
1620-0234
1603-0020
FOOTPEGS
1620-0522
1620-0523
1620-0056
1620-0403
1620-0406
DS-253691
DS-253701
1620-0054
DS-253717
DS-253720
1620-0439
DS-253733
1620-0234
DS-253740
DS-253740
DS-253742
SHIFT PEG
1603-0087
1603-0088
1603-0001
1603-0061
1603-0064
DS-253692
DS-253703
1603-0019
DS-253718
DS-253727
1603-0070
DS-253735
1603-0020
DS-253742
REPLACEMENT BANDS
DS-243152 (footpegs, 12-pk.), DS-253729 (shift peg, 4-pk.)
PRICE CHART
PART #
1603-0001
1603-0019
1603-0020
1603-0061
1603-0064
1603-0070
1603-0087
SUG. RETAIL
$37.95
61.95
55.95
43.95
43.95
43.95
51.95
PART #
1603-0088
1620-0054
1620-0056
1620-0234
1620-0403
1620-0406
1620-0439
SUG. RETAIL
$51.95
141.95
102.95
145.95
106.95
106.95
131.95
PART #
1620-0522
1620-0523
DS-243152
DS-253691
DS-253692
DS-253701
DS-253703
SUG. RETAIL
$141.95
141.95
14.95
110.95
43.95
106.95
41.95
PART #
DS-253717
DS-253718
DS-253720
DS-253726
DS-253727
DS-253729
DS-253733
SUG. RETAIL
$112.95
43.95
106.95
14.95
37.95
6.95
110.95
PART #
DS-253735
DS-253740
DS-253742
SUG. RETAIL
$43.95
112.95
37.95
SECTION
18
1620-0455
WINDSHIELDS
1620-0404
1904-3393
TOURING
1620-0405
LUGGAGE
1904-1074
SEATS &
SISSY BARS
BILLET FOOTPEGS AND SHIFT PEGS
•Machined from 6061 T-6 billet aluminum
•Choose from chrome or black finish
•Footpegs are available with male mounts
•Matching shift pegs sold separately
PART #
DESCRIPTION
FOOTPEGS
1904-3393
Round hole, chrome
1620-0404
Round hole, black
1620-0455
Oval hole, chrome
1620-0405
Oval hole, black
1904-1079
1603-0062
1603-0063
EXHAUST
SUG. RETAIL
$135.95
139.95
135.95
139.95
1620-0239
PART #
SHIFT PEGS
1904-1074
1603-0062
1904-1079
1603-0063
DESCRIPTION
SUG. RETAIL
Round hole, chrome
Round hole, black
Oval hole, chrome
Oval hole, black
$53.95
53.95
53.95
53.95
ENGINE
1620-0248
1620-0242
FUEL/AIR
SYSTEMS
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
1603-0029
ELECTRICAL
LIGHTING
1603-0028
1620-0410
1620-0409
1620-0411
HANDLEBARS,
CONTROLS
& MIRRORS
FOOTPEGS/MOUNTS AND SHIFTER PEGS
•Footpegs and shifter pegs made from 6061 T-6 billet aluminum
•Footpeg mounts machined from 7075 billet aluminum
•Available in four distinct designs with a chrome or black anodized finish
•Spike head footpegs measure 53/4” L
•Spike head shifter pegs measure 33/4” L
•Polished or black footpeg mounts are offered in three different styles
•Footpegs and mounts are sold in pairs and must be purchased separately
•Footpeg mounts work only with Pro-One foot pegs
•Shifter pegs fit all models (except V-Rod) and Pro-One forward controls;
sold individually
FOOTPEGS
SUG.
PART #
DESCRIPTION RETAIL
CHROME SPIKE HEAD FOOTPEGS
1620-0239 Smooth
$154.95
1620-0241 Ball-milled
154.95
1620-0245 Iron Cross
154.95
1620-0247 Flames
154.95
FOOTPEG MOUNTS
SUG.
PART #
DESCRIPTION RETAIL
BLACK SPIKE HEAD FOOTPEGS
1620-0240 Smooth
$154.95
1620-0242 Ball-milled
154.95
1620-0246 Iron Cross
154.95
1620-0248 Flames
154.95
SHIFTER PEGS
PART #
DESCRIPTION
POLISHED FOOTPEG MOUNTS
1620-0409 3” male mount, for
custom applications
and Pro-One
Forward Controls
1620-0410 Stock Harley-style
male mount
1620-0411 13/4” male mount,
for passenger peg
applications on most
stock HD and customs
SUG. RETAIL
$94.95
88.95
88.95
PART #
DESCRIPTION
BLACK FOOTPEG MOUNTS
1620-0412 3” male mount, for
custom applications
and Pro-One
Forward Controls
1620-0413 Stock Harley-style
male mount
1620-0414 13/4” male mount,
for passenger peg
applications on most
stock HD and customs
SUG. RETAIL
$94.95
88.95
PART #
DESCRIPTION
CHROME SPIKE HEAD PEGS
1603-0021
Smooth
1603-0023
Ball-milled
1603-0027
Iron Cross
1603-0029
Flames
BLACK SPIKE HEAD PEGS
1603-0022
Smooth
1603-0024
Ball-milled
1603-0028
Iron Cross
1603-0030
Flames
SUG. RETAIL
$48.95
48.95
48.95
48.95
48.95
48.95
48.95
48.95
88.95
•Available in scimitar, rubber band and ball-milled styles
•Rubber band style matches forward control sets PART
#s 1904-0003, 1904-0004 and 1904-0006
•Fit all applications with male mount footpegs
•Sold in pairs
SUG. RETAIL
$143.95
116.95
116.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
TIRES,
TUBES &
WHEELS
BILLET FOOTPEGS
DESCRIPTION
Scimitar
Rubber band
Ball-milled
BRAKES
FOOTRESTS
& LICENSE
PLATE FRAMES
1620-0050
PART #
1620-0050
1620-0051
DS-253487
CABLES
DS-253487
1620-0051
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1049
SECTION
18
WINDSHIELDS
1620-0515
TOURING
1620-0514
1620-0067
LUGGAGE
1620-0068
REAR SOFTAIL FOLDING
FLUSH-MOUNT FOOTPEGS
•Pegs are designed to follow the
curvature of the frame so when
they are in the up position they
fit flush with the frame
•Fit in the factory rear peg location
and take just moments to install;
even simpler then the standard
peg set up
•CNC-machined from 6061
aluminum with chrome finish
•Use stainless steel springs and pins
•Available in a cutout design
SEATS &
SISSY BARS
FOOTPEGS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
•Machined from 1018 steel and finished with black
military paint
•5/8” male mounts
•LBC pegs feature a stainless steel dimpled insert
•FTW pegs match FTW forward controls or floorboards
•Also work as passenger pegs
•Sold in pairs
PART #
1620-0514
1620-0515
DESCRIPTION
LBC logo, 11/2” wide x 53/4” long
FTW logo, 13/4” wide x 31/2” long
SUG. RETAIL
$224.95
224.95
TRANSMISSION
& DRIVELINE
1620-0069
1620-0069
PART #
DESCRIPTION
SUG. RETAIL
FOR ALL FXST, FLST WITH SHOTGUN EXHAUST (AND MOST WIDE
TIRE SWINGARMS)
1620-0067
Chrome
$240.95
1620-0068
Black powder-coated
239.95
FOR ALL FXST, FLST (EXCEPT MODELS WITH SHOTGUN EXHAUST)
1620-0069
Black powder-coated
239.95
1904-1029
Chrome
218.95
GASKETS
& SEALS
1603-0008
1620-0177
ELECTRICAL
1620-0467
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CHROME ROUND-STYLE
FOOTPEGS AND SHIFTER PEG
1603-0086
•Footpegs feature a two-piece billet assembly that
allows the body to be rotated to fit the rider’s
personal preference
•Undercut foot area
•Fit standard male mounts
•All parts are fully CNC-machined from billet stock
•Ball-milled styling and fully chrome-plated
•Matching shifter peg available separately
1603-0085
CABLES
1620-0470
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1050
PART #
1620-0177
1603-0008
SERRATED BILLET
FOOTPEGS AND SHIFTER PEGS
•Fully CNC-machined from solid 6061 T-6 aluminum
•Super strong, yet lightweight one-piece construction
•The comfortable serrated foot surface area gives you
a wider area for your feet and provides a good “bite”
onto the bottom of your shoe
•Footpegs feature a pitch adjustment screw that enables
you to change the angle of the peg in order to adjust it to a “level” riding
position (if necessary) so the pegs don’t appear to “lay down” with time,
vibration, etc.
•Shifter peg has serrations on the top surface only – the bottom side is
smooth to provide non-shoe-damaging upshifts; installs easily to most
shift arms with a threaded 5/16”-24 mounting hole
•Footpegs and shifter pegs are available in silver clear anodized or “hard
black” anodized finish
•Footpegs are available in two different lengths and fits most models with
standard Harley female footpeg mounts – short pegs work great for
a passenger peg, while the long pegs work great for driver
or highway pegs
•Sold in pairs
PART #
DESCRIPTION
SHORT FOOTPEGS (35/16” LONG X 21/2” WIDE X 1” THICK)
1620-0467
Black anodized
1620-0468
Clear anodized
9
LONG FOOTPEGS (3 /16” LONG X 21/2” WIDE X 1” THICK)
1620-0469
Black anodized
1620-0470
Clear anodized
SHIFTER PEGS
1603-0085
Black anodized
1603-0086
Clear anodized
SUG. RETAIL
$119.95
119.95
119.95
119.95
34.95
34.95
DESCRIPTION
Footpegs
Shifter peg
SUG. RETAIL
$131.95
34.95
DS-243019
1904-2002
CHROME BILLET FOOTPEGS
•Machined from 6061 T-6 billet aluminum
•Male mount style, measure 43/8” L
•Available with or without built-in heel rests
•Hidden setscrews for height adjustment
•Sold in pairs
PART #
DESCRIPTION
WITH HEEL RESTS
DS-243525
Billet pegs
1904-2002
Billet pegs w/ rubber insert
WITHOUT HEEL RESTS
DS-243019
Billet pegs
1904-2001
Billet pegs w/ rubber insert
SUG. RETAIL
$131.95
149.95
109.95
129.95
SECTION
18
WINDSHIELDS
CONTOUR FOOTPEGS
AND SHIFT PEDALS
•Designed to match Performance
Machine Contour grips
•Rubber wrapped
•Direct stock replacement
1620-0516
•Male-mount design fits most H-D applications
•Available in black anodized or chrome finish
•Replacement rubber and chrome hardware
upgrade available separately
SUG.
PART #
DESCRIPTION
FOOTPEGS
1620-0516 Chrome (pr.)
1620-0517 Black (pr.)
RETAIL
$99.95
99.95
TOURING
1603-0083
1620-0517
2404-0367
1603-0082
SUG.
RETAIL
PART #
DESCRIPTION
SHIFT PEG
1603-0082 Chrome (ea.)
1603-0083 Black (ea.)
$24.95
24.95
SUG.
PART #
DESCRIPTION
RETAIL
1620-0518 Replacement footpeg rubber (ea.) $5.99
1603-0084 Replacement shift rubber (ea.)
4.95
2404-0367 Chrome footpeg hardware kit
7.95
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
1603-0012
1620-0564
FUEL/AIR
SYSTEMS
MALTESE CROSS FOOTPEGS
•Made from 6061 billet aluminum
1620-0190
•Choice of chrome, black anodized or black
powder-coated finish
•Perfect match for Maltese Cross grips and risers
PART #
DESCRIPTION
MALE-MOUNT FOOTPEGS
1620-0190 Chrome footpeg, chrome
cross (pr.)
1620-0191 Black footpeg, polished
cross (pr.)
SUG. RETAIL
$189.95
PART #
DESCRIPTION
SUG. RETAIL
MALE-MOUNT FOOTPEGS (CONT)
1620-0564 Black knurled footpeg (pr.)
$189.95
1620-0565 Black footpeg,
gold cross (pr.)
189.95
189.95
PART #
DESCRIPTION
SUG. RETAIL
SHIFTER/BRAKE PEGS
1603-0011 Chrome peg, chrome cross $69.95 (ea.)
1603-0012 Black peg, polished cross
69.95 (ea.)
1603-0091 Knurled black peg
67.95 (ea.)
1603-0092 Black peg, gold cross
67.95 (ea.)
1620-0071
1603-0004
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
CUSTOM FOOTPEGS
LIGHTING
1620-0526
1603-0089
•Chrome-plated billet footpegs
•Mount to OEM-style footpeg clevis
•Matching shifter pegs also available
•Shifter peg extension moves shifter peg
out 1” for easier access
PART #
FOOTPEGS
1620-0071
1620-0526
HANDLEBARS,
CONTROLS
& MIRRORS
Right
Left
DESCRIPTION
SUG. RETAIL
Rubber
Ali Baba
$109.95
109.95
PART #
SHIFT PEGS
1603-0004
1603-0089
1620-0073
DESCRIPTION
CABLES
SUG. RETAIL
Rubber
Ali Baba
Shifter peg 1” extension
$39.95
39.95
28.95
BRAKES
1620-0284
TANKS &
OIL FILTERS
DS-253309
DASHES
& GAUGES
1620-0049
1620-0283
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
1620-0287
FOLDING FOOTPEGS
•Fold-up design adds convenience
•Chrome billet footpegs with either 1/2”-13 or
3/8”-16 mounting holes
•Two styles available: banded with rubber pads
or slotted style
•Great match for the Thunder Heart
forward controls
•Made in the U.S.A.; sold in pairs
SUG.
PART #
DS-253309
DS-253310
1620-0283
DS-253011
DESCRIPTION
RETAIL
Banded w/ 1/2”-13 mounting hole $126.95
Banded w/ 3/8”-16 mounting hole 115.95
Slotted w/ 1/2”-13 mounting hole 138.95
Repl. footpeg rubbers for
Banded pegs (6-pc. set)
13.95
DEAD END
FOOTPEGS/SHIFT PEGS
•Chrome-plated billet aluminum
PART #
DESCRIPTION
FOOTPEGS (PR.)
1620-0284
1” Ball-milled
1620-0285
3” Ball-milled
1620-0286
1” Flamed
1620-0287
3” Flamed
SHIFTER/BRAKE PEGS (EA.)
1603-0048
Ball-milled
1603-0049
Flamed
SUG. RETAIL
$202.95
212.95
204.95
204.95
51.95
51.95
ADJUSTABLE BILLET FOOTPEGS
•51/2” footpegs can be comfort-adjusted
by loosening the center bolt and turning
to any angle
•Chrome finish with a ball-milled design
•Fit all bikes using male mount footpegs
•Sold as a pair
PART #
DESCRIPTION
DS-253489 Adjustable billet footpegs
SUG. RETAIL
$132.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1051
SECTION
18
1622-0014
WINDSHIELDS
1603-0050
1620-0288
TOURING
LUGGAGE
1624-0025
SEATS &
SISSY BARS
1811-8505
1811-8503
DS-243650
DS-243652
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
CHROME FOOTPEGS
AND SHIFTER/BRAKE PEGS
•Billet 6061 T-6 aluminum construction
•Shifter/brakes peg fits most shifter
and brake pedals that accept
bolt-on peg
1811-8504
PART #
DESCRIPTION
X-FACTOR PEGS
1620-0288
Male mount, 61/4” long
1603-0050
Shifter/brake (pr.), 41/2” long
GOTHIC PEGS
1624-0025
1622-0014
Shifter/brake, 31/2” long (ea.)
KNURLED PEGS
1811-8503
1811-8505
Rigid mount, 73/4” long
1811-8504
Shifter/brake, 21/4” long (ea.)
CHROME FOOTPEGS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1052
•Designed to match the
billet forward control line
•Machined from billet
aluminum and finished
with high-quality
chrome plating
•To be used in a clevisstyle mount with the
stock hardware
•Sold in pairs,
unless noted
SUG. RETAIL
$151.95
128.95
151.95
71.95
151.95
157.95
61.95
1603-0051
PART #
DESCRIPTION
RUBBER PEGS
DS-243652
Rubber (male-mount), 51/2” long
DS-243650
Rigid mount, 73/4” long
DS-243651
Shifter/brake, 37/8” long (pr.)
1603-0051
Radius rubber shifter/brake (pr.), 3” long
1904-7540
For shifter/brake peg
1904-7541
For male-mount footpeg
1904-7542
For rigid-mount footpegs
DS-243082
SUG. RETAIL
$140.95
157.95
98.95
98.95
8.95
8.95
8.95
DS-243577
DS-243083
PART #
DESCRIPTION
STRAIGHT MALE MOUNT FOR SOFTAIL/XL
DS-243082
Slotted
45° MALE MOUNT FOR FXR/DYNA GLIDE
DS-243083
Slotted
SUG. RETAIL
$140.95
140.95
FOLDING
FOOTPEGS
•Chrome-plated
billet aluminum
•Designed to
match Accutronix
billet forward
controls
•Convert
Accutronix
forward controls
to folding-style
footrests
•Include pivot
mounts, 3/8”
mounting bolts
and hardware
•Sold in pairs
PART #
DS-243639
DS-243643
DS-243653
DS-243651
PART #
DESCRIPTION
SUG. RETAIL
45° MALE MOUNT FOR FXR/DYNA GLIDE (CONT)
DS-243577
Milled
$140.95
1904-7541
For folding/male-mount footpegs DS-243652
8.95
DS-243582
DS-243597
DS-243653
DS-243639
FOLDING
PASSENGER FOOTPEGS
DS-243643
DESCRIPTION
Milled
Slotted
Rubber
SUG. RETAIL
$207.95
207.95
207.95
DS-243598
•Mount with 1/2” button head bolts
•Sold in pairs
SUG.
PART #
DESCRIPTION RETAIL
DS-243582
Milled
$207.95
DS-243597
Rubber
207.95
DS-243598
Slotted
207.95
PHANTOMZ FOLDING PASSENGER FOOTPEGS
•High-quality billet aluminum construction with a chrome finish
•Match Phantomz forward controls
•1/2”-13 mounting holes
•Measure 43/4” L; 61/2” L overall with mount
•Sold in pairs
PART #
DESCRIPTION
1620-0290
Phantomz passenger footpegs
SUG. RETAIL
$144.95
SECTION
18
DS-243572
WINDSHIELDS
1620-0395
DS-243571
1620-0399
DS-243512
TOURING
DS-253068
1620-0391
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
1620-0396
DS-253065
DS-253067
FUEL/AIR
SYSTEMS
1603-0058
FOOTPEGS AND
SHIFTER PEGS
DS-253032
1603-0059
•Available in wide band, full rubber
or dovetail styles
•Footpegs sold in pairs; shifter pegs
are sold each
•Available with chrome or black-anodized finish
PART #
DESCRIPTION
SUG. RETAIL
FEMALE-MOUNT PEGS
1620-0400 1.25” full rubber;
chrome
$115.95
1620-0402 1.25” full rubber; black
115.95
MALE-MOUNT PEGS
DS-243512 1” wide band; chrome
115.95
1620-0395 1” wide band; black
115.95
DS-243572 1” full rubber; chrome
115.95
1620-0399 1” full rubber; black
115.95
DS-243571 1” dovetail; chrome
115.95
1620-0397 1” dovetail; black
115.95
DS-253020 1.25” wide band;
chrome
115.95
ENGINE
1603-0060
DS-253033
PART #
DESCRIPTION
SUG. RETAIL
MALE-MOUNT PEGS (CONT)
1620-0396 1.25” wide band; black
$115.95
DS-253022 1.25” dovetail; chrome
115.95
1620-0398 1.25” dovetail; black
115.95
3/8”-16 THREADED SPRING-LOADED FOLDING
MALE-MOUNT PEGS
115.95
115.95
MALE-MOUNT PEGS
115.95
115.95
DS-253067 1” full rubber; chrome
115.95
DS-253034
PART #
DESCRIPTION
SUG. RETAIL
MALE-MOUNT PEGS (CONT)
1620-0394 1” full rubber; black
$115.95
DS-253068 1”dovetail; chrome
115.95
1620-0393 1”dovetail; black
115.95
SHIFTER PEGS
DS-253032 Wide band; chrome
41.95
1603-0058 Wide band; black
41.95
DS-253033 Full rubber; chrome
41.95
1603-0060 Full rubber; black
41.95
DS-253034 Dovetail; chrome
41.95
1603-0059 Dovetail; black
41.95
1603-0057
WIDE BAND
DS-243518
DS-243514
DS-243517
SUG. RETAIL
$18.95
14.95
8.95
FULL RUBBER
DS-253057
1603-0057
DS-253059
DS-243514
SUG. RETAIL
$15.95
21.95
7.95
DOVETAIL
1603-0056
DS-253061
DS-253062
SUG. RETAIL
$31.95
24.95
11.95
1620-0052
1620-0053
PART #
1620-0563
1603-0090
DESCRIPTION
Male-mount footpegs
Shifter peg, male end
RIGID-MOUNT FOOTPEGS
•CNC-machined billet aluminum six-gun footpegs
•Barrels are staggered, ball-milled and left with
a brushed, machine finish
•Polished end caps have .44 magnum bullets in them
•Threaded for 3/8”-16 bolts
SUG. RETAIL
$189.95
84.95
CABLES
PART #
1620-0052
1620-0053
DESCRIPTION
71/2” driver footpegs
31/2” passenger footpegs
TANKS &
OIL FILTERS
DASHES
& GAUGES
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
1620-0563
•CNC-machined billet aluminum six-gun style
•Ball-milled design
•Polished end caps have .44 magnum bullet cases
in them
LIGHTING
FRAMES,
SUSPENSION
& FENDERS
1603-0090
FOOTPEGS AND SHIFTER PEGS
ELECTRICAL
BRAKES
DS-243518
•Replacement peg rubbers are sold for two pegs; replacement shifter rubbers are for one peg
DESCRIPTION
1” pegs
11/4” pegs
Shifter pegs
GASKETS
& SEALS
HANDLEBARS,
CONTROLS
& MIRRORS
1603-0056
REPLACEMENT RUBBER COMPONENTS
FOR JAYBRAKE FOOTPEGS/SHIFTER PEGS
TRANSMISSION
& DRIVELINE
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$230.95
220.95
COVERS,
SECURITY
& GENERAL
1053
SECTION
18
1603-0055
1603-0054
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
SHIFTER PEGS
REAR FINNED FOOTPEGS
•Sold in pairs
PART #
1620-0379
1620-0380
•CNC machined from
billet aluminum
•Finned detailing
•Fits all stock controls
1620-0380
DESCRIPTION
Black
Chrome
SUG. RETAIL
$171.95
171.95
PART #
1603-0054
1603-0055
DESCRIPTION
Black
Chrome
SUG. RETAIL
$40.95
40.95
EXHAUST
1620-0415
1620-0421
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
1620-0535
1620-0416
1620-0417
1620-0538
DRIVER FOOTPEGS
•CNC-machined 6061 T-6 billet aluminum
with chrome-plated or black anodized finish
•Fits stock or most after-market
Harley-Davidson forward controls
•Male mount design
•Sold in pairs
SUG.
PART #
DESCRIPTION
RETAIL
1620-0421 Premium Flat Top, chrome $155.95
1620-0539 Premium Flat Top, black
165.95
1620-0419 Pro Smooth, chrome
150.95
1620-0538 Pro Smooth, black
160.95
150.95
PART #
1620-0540
1620-0415
1620-0535
1620-0416
1620-0536
SUG.
DESCRIPTION
RETAIL
Classic, black
$160.95
150.95
Tribal Lance, chrome
Tribal Lance, black
160.95
Tribal Lance Flat Top, chrome 160.95
Medieval, chrome
160.95
1620-0530
1620-0123
ELECTRICAL
1620-0537
1620-0536
PART #
1620-0537
1620-0541
1620-0452
DESCRIPTION
Medieval, black
Valor, chrome
Valor, black
1620-0532
1620-0126
1620-0541
SUG.
RETAIL
$170.95
160.95
170.95
1620-0195
1620-0215
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
•Billet aluminum footpegs available
in Premium, Premium with rubber,
Pro-Smooth, Classic and Tribal styles
•Matching forward controls available; see page 1029
•Available with a chrome-plated or black anodized finish
•Sold in pairs
PART #
DESCRIPTION
FOR ALL FXST MODELS
1620-0123
Premium, chrome
1620-0531
Premium, black
FOR ALL FXST/FXR/DYNA MODELS
1620-0125
Pro smooth, chrome
1620-0530
Pro smooth, black
FRAMES,
SUSPENSION
& FENDERS
SUG. RETAIL
$150.95
160.95
1620-0596
DASHES
& GAUGES
145.95
155.95
COVERS,
SECURITY
& GENERAL
1054
1620-0527
1620-0529
PART #
DESCRIPTION
SUG. RETAIL
FOR ALL FXST/FXR/DYNA MODELS (CONT)
1620-0126
Classic, chrome
$145.95
1620-0532
Classic, black
155.95
1620-0195
Tribal lance, chrome
145.95
1620-0527
Tribal lance, black
155.95
1620-0528
Medieval, chrome
155.95
1620-0597
PART #
DESCRIPTION
SUG. RETAIL
FOR ALL FXST/FXR/DYNA MODELS (CONT)
1620-0529
Medieval, black
$165.95
1620-0533
Valor, chrome
155.95
1620-0534
Valor, black
165.95
DS-253411
1603-0096
DS-253412
1603-0097
FOOTRESTS
& LICENSE
PLATE FRAMES PASSENGER PEGS AND
SHIFTER/BRAKE PEGS
TIRES,
•Fold-up rubber passenger pegs
TUBES &
•Shifter/brake toe peg with rubber insert
WHEELS
•Available in chrome or black anodized
HARDWARE,
CHEMICALS
& TOOLS
1620-0533
1620-0528
PASSENGER FOOTPEGS
DS-253451
DIAMOND II
FOOTPEGS
AND SHIFT PEGS
•Match Hawg Halters forward controls
PART #
DESCRIPTION
PASSENGER PEGS
1620-0596
Chrome
1620-0597
Black anodized
SHIFTER/BRAKE TOE PEGS
1603-0096
Chrome
1603-0097
Black anodized
SUG. RETAIL
$234.95
234.95
48.95 (ea.)
48.95 (ea.)
•High-quality, chrome-plated billet aluminum
•Matching covers available for air cleaner,
master cylinder and brake caliper insert
•Matching shifter peg sold separately
PART #
DESCRIPTION
SUG. RETAIL
DS-253411 Male mount footpegs
$90.95
DS-253412 Shift peg
26.95
CHROME BILLET CLASSIC
PASSENGER FOOTPEGS
•Billet passenger footpegs that match
Performance Machine’s chrome billet
classic forward controls
SUG.
PART #
DESCRIPTION
RETAIL
DS-253452 For 00-09 FXST
$189.95
DS-253451 For 84-99 FXST
169.95
DS-253450 Universal w/
folding mounts
199.95
SECTION
18
WINDSHIELDS
1620-0519
TOURING
1620-0566
LUGGAGE
MOTO FOOTPEGS
SEATS &
SISSY BARS
1620-0567
•Machined from billet aluminum
•Hardware (PART #2404-0367) sold separately
•Sold in pairs
PART #
DESCRIPTION
1620-0519
Chrome
1620-0520
Black anodized
1620-0520
1620-0569
SUG. RETAIL
$99.95
99.95
1620-0568
EXHAUST
FUEL/AIR
SYSTEMS
FOOTPEGS
SHIFTER PEGS
•Match the Vice hand grips
•CNC-machined
•Sold each
1603-0093
PART #
DESCRIPTION
1603-0093
Chrome
1603-0094
Black
1603-0095
Brass
1603-0094
1603-0095
SUG. RETAIL
$64.95
64.95
81.95
•Match the Vice hand grips
•CNC-machined
•Removable end cap sealed with
an O-ring for easy installation
and storage of registration
•Will work with stock female Clevis if used with PART #1620-0569
•Male mounts sold separately
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
1620-0566
Chrome
$128.95
1620-0567
Black
128.95
1620-0568
Solid brass
164.95
1620-0569
Male mounts for stock H-D female Clevis,
polished stainless (pr.)
82.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
1624-0037
LIGHTING
1624-0038
1624-0155
1624-0156
HANDLEBARS,
CONTROLS
& MIRRORS
1624-0157
CABLES
CLAMP-ON FOOTPEGS
•High-quality billet aluminum clamp-on footpegs will fit any highway bar or frame with 11/4” o.d. tubing
•Footpegs sold in pairs
1624-0039
•Replacement rubber ribs, flat bands and O-rings sold separately; sold in quantities for one set of pegs, unless noted
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
SUG. RETAIL
1624-0155
Black anodized clamp-on O-rings footpegs
$189.95 1624-0039
Chrome clamp-on ribbed footpegs
$187.95
1624-0156
Black anodized clamp-on wide band footpegs
189.95 1620-0236
Repl. O-rings (16-pk.)
7.95
1624-0157
Black anodized clamp-on ribbed footpegs
189.95 1620-0237
Repl. flat bands (6-pk.)
14.95
1624-0037
Chrome clamp-on O-rings footpegs
187.95 1620-0238
Repl. ribs (16-pk.)
20.95
1624-0038
Chrome clamp-on wide band footpegs
187.95
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
DS-253007
FRAMES,
SUSPENSION
& FENDERS
MC220
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-253008
MC320
COMPETITION FOOTPEGS
•Available in satin finish
•Fit any male mount application (FX, FXST, FXR,
FXD and XL models)
•Matching shifter peg available
FOOTPEGS
•Dress up your bike – or add that
finishing custom touch
•Sold in pairs
PART # DESCRIPTION
SUG. RETAIL
$62.95
MC220 1”-11/4” U-clamp mount
MC320 1” aluminum mount; index
adjustable
65.95
PART #
DS-253007
DS-253008
DESCRIPTION
Small footpegs (mid/
rear mount)
Small shifter peg
SUG. RETAIL
$84.95
19.95
MULTI-FACET FOOTPEGS
•Unique design and mirror-like polish reflects
light like nothing else
•Made of show-quality chrome-plated 6061 T-6
billet aluminum
•Measure 4.3” L x 1.375” diameter
•Sold in pairs
PART #
FTP-200
DESCRIPTION
SUG. RETAIL
Multi-facet style footpegs
$99.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1055
SECTION
18
GROOVED
FOOTPEG BOLT KIT
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
•Functional, stylish
fasteners with grooved
socket-heads
•Certified SDF (Seamless and
Defect Free) stainless steel, heat
treated to a minimum of 180,000
psi (20% stronger than GR8) with
threads rolled to a UNJ3A spec
•Sold in set of four
SLEEK
FOOTPEG BOLTS
•Bolts screw into each other,
eliminating unsightly nut and extra thread
•Stainless steel construction with mirror
polished heads
•3/8” diameter barrel
•Sold in pairs
PART #
SFB-740
DESCRIPTION
Sleek footpeg bolts
SUG. RETAIL
$24.95
CHROME FOOTPEG
MOUNTING PINS
PART #
2401-0356
DESCRIPTION
Grooved footpeg bolt kit
SUG. RETAIL
$23.95
FOOTPEG SPRING WASHERS
•Chrome-plated hardened steel
•Pins are held in place by retaining clips
•Eliminate 3/8” bolts held in place
by retaining ring
•For 15/16” wide peg mounts
•Sold each to consumer; sold to dealers in 10-pack
PART #
DESCRIPTION
1904-5041
Footpeg pins
•Used for creating friction
on male-mount footpegs
•Can be used on most aftermarket
male-mount footpegs
•Sold each to consumer; sold to dealer
in 10-pack
SUG. RETAIL
$4.95 (ea.)
PART #
DS-253005
DESCRIPTION
Repl. OEM #50912-72
SUG. RETAIL
$.95 (ea.)
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
SHORT-BONES
HIGHWAY PEG BRACKETS
•Designed with the short-inseam
rider in mind
•Simple and cost-effective way
to relocate the stock highway
bar pegs
•Bolt-on for Dyna Lowrider
•Universal fit for models with 11/4”
engine guards when used with
engine guard clamp PART #DS-203008A and footpeg clevis mount PART #DS-253483
•Brackets are made of polished billet aluminum
•Include easy-to-follow instructions for quick installation
PART #
1624-0045
DESCRIPTION
For 94-09 FXDL/FXD models, 94-09 FLHTC models and 94-06 FHLTCU models
SUG. RETAIL
$58.95
DS-253492
CABLES
DS-253483
DS-253481
BRAKES
1620-0363
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
CHROME PASSENGER FOOTPEG
MOUNT KIT
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1056
REPLACEMENT
CHROME FOOTPEG MOUNTS
•Used for mounting passenger footpegs
or replacing existing OEM footpeg mounts
•Includes mounting hardware
•Accepts most male mount pegs
•Sold in pairs
PART #
DS-252990
1620-0363
•Make it possible to mount Drag Specialties
or OEM footpegs in any location
•Chrome-plated steel construction
DESCRIPTION
For 83-09 XL; repl. OEM #50610-86T
For 04-09 XL models; repl. OEM #49322-04
FOOTRESTS
& LICENSE MALE MOUNT
PLATE FRAMES LOCKABLE
TIRES,
TUBES &
WHEELS
DS-253482
DS-252990
SUG. RETAIL
$37.95
84.95
1620-0183
OFFSETS
•Feature a cogged
head that lets you adjust the offset
•Gives a huge range of adjustment without
the fear of the peg slipping
•Can be used for highway pegs,
passenger pegs, or any H-D-style
male-mount application
•Tapered end accepts any Kuryakyn footpeg
•Sold in pairs
PART #
1620-0183
1620-0184
DESCRIPTION
W/ 2” lockable offset
W/ 4” lockable offset
PART #
DESCRIPTION
SUG. RETAIL
DS-253481 Footpeg bullet mount for 71-86 FX; 65-84 FL, short
$11.95
with 3/8”-24 thread (pr.); repl. OEM #50937-65
DS-253482 Footpeg bullet mount for 71-72 FX; 41-64 FL, long
11.95
with 1/2”-20 thread (pr.); repl. OEM #52683-74
DS-253483 Footpeg clevis mount for 71-94 FX, FXR, FXST; 73-93
12.95
XL, with 1/2”-20 thread; repl. OEM #50900-72 (ea.)
DS-253492 Footpeg clevis mount with 3/8-24” thread (pr.)
18.95
OFFSET
PEG MOUNTS
1620-0184
SUG. RETAIL
$59.95
59.95
•Can be adjusted
to short, tall or
in-between riders
•Allow you to upgrade an existing
set of highway or passenger pegs
•Fit all male-style pegs
•Sold in pairs
PART #
DS-253593
DESCRIPTION
Offset peg mounts (1/2”-13 mounting bolts)
SUG. RETAIL
$44.95
SECTION
DS-253055
DS-253053
18
WINDSHIELDS
DS-253054
TOURING
5/8”
SQUARE
FOOTPEG
MOUNTING
BLOCKS
LUGGAGE
•Chrome steel construction;
DS-253056
available in several lengths
•Accept most female footpegs
•Used on motor mount bars as well as passenger footpeg bars
•Come with 3/8”-16 x 3/4” bolts; sold in pairs
PART #
DS-253053
DS-253054
DESCRIPTION
2” blocks
3” blocks
SUG.
RETAIL
$17.95
17.95
PART #
DS-253055
DS-253056
DESCRIPTION
4” blocks
5” blocks
SUG.
RETAIL
$17.95
19.95
CHROME
FOOTPEG ELEVATORS
•Used to raise the driver
footpegs about 1”
•Include mounting blocks, button
head bolts and nuts; sold in pairs
PART #
1904-8001
DESCRIPTION
Footpeg elevators
PASSENGER FOOTPEG
MOUNTING KIT
SUG. RETAIL
$86.95
DESCRIPTION
For 93-09 FLT
FUEL/AIR
SYSTEMS
SUG. RETAIL
$76.95
ERGONOMIC
FOOTPEG
CLEVISES
SUG. RETAIL
PART #
1904-3395
ENGINE
TRANSMISSION
& DRIVELINE
•Patented clevises
have a built-in 22°
of rearward sweep
to properly mate
the rider’s foot to the footpeg
•Give you hours of riding comfort compared to angled factory pegs
•Sold in pairs
U.S. Patent #5,826,900.
•Chrome passenger footpeg
mounting plates and clevis
replace the rear
footrest brackets
•Any male mount pegs can be used with this bracket set
DESCRIPTION
For 77-84 FL and 77-86 FX;
repl. OEM #s 47116-77 and 47117-77
EXHAUST
•Chrome-plated billet steel
mounting kit allows for the
mounting of passenger footpegs
in place of the OEM floorboards
•Accepts any male
mount footpegs
•Footpegs sold separately
PART #
DS-243659
PASSENGER FOOTPEG
BRACKET SET
PART #
DS-253484
SEATS &
SISSY BARS
DESCRIPTION
Footpeg clevises
GASKETS
& SEALS
ELECTRICAL
SUG. RETAIL
$27.95
LIGHTING
$41.95
HANDLEBARS,
CONTROLS
& MIRRORS
1620-0005
CABLES
BRAKES
PASSENGER FOOTPEG
RELOCATION BRACKET
ROAD-ROD® PASSENGER FOOTPEG RELOCATION KIT
•Relocates the passenger footpegs to the swingarm pivot shaft
•Includes a pivot shaft, chrome-plated end caps and clevises
•Available in chrome or black powder-coat
NOTE: Does not fit VRSCD.
FOR 02-09 VRSCA/B/C V-ROD
PART #
DESCRIPTION
CHROME
1620-0005
W/ custom exhaust
1620-0045
W/ stock or Screamin’ Eagle exhaust
BLACK
1620-0524
W/ custom exhaust
1620-0525
W/ stock or Screamin’ Eagle exhaust
SUG. RETAIL
$299.95
299.95
TANKS &
OIL FILTERS
•Allows use of passenger pegs
with RSD/Vance & Hines Tracker 2-into-1 exhaust system
•Raises passenger pegs 4” above OEM location
•Machined from billet aluminum
•Mounts directly to existing passenger peg mounting hole
•Accepts OEM pegs or any aftermarket male-mount style pegs
•All mounting hardware included
PART #
DESCRIPTION
FOR 86-09 FXST/FLST W/ RSD/VANCE & HINES
TRACKER 2-INTO-1 EXHAUST SYSTEM
1620-0521
Black powdercoat
DASHES
& GAUGES
SUG. RETAIL
$69.95
FOOTRESTS
& LICENSE
PLATE FRAMES
299.95
299.95
PASSENGER PEG
RELOCATION KIT
TIRES,
TUBES &
WHEELS
•Designed to relocate
the passenger footpegs
so the passenger can lean back
against a sissy bar
•Attaches to the frame using stock fender strut bolts
•Chrome finish
NOTE: Footpegs and mounting clevis not included
in kit.
PART #
DESCRIPTION
DS-253486
For all 84-99 FXST/FLST
FRAMES,
SUSPENSION
& FENDERS
HARDWARE,
CHEMICALS
& TOOLS
PASSENGER FOOTPEG
RELOCATION KIT
•Offers an extra footpeg location for the passenger
•Threads into the unused seat mounting hole
NOTE: Will also fit FLST models if OEM frame-mounted seat is not used.
SUG. RETAIL
$19.95
PART #
DS-253485
DESCRIPTION
For 84-99 FXST
SUG. RETAIL
$21.95
COVERS,
SECURITY
& GENERAL
1057
SECTION
18
1811-2990
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
REAR
FOOTPEG MOUNTS
•Chrome billet footpeg mounts
allow you to replace the rear
floorboards on 93-09 FLT/FLHT
models with any male mount
standard footpegs
•Hardware included
•Sold in pairs
PART #
DESCRIPTION
1620-0107
For 93-09 FLT/FLHT
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
SUG. RETAIL
$75.95
•Used to mount malemount pegs to JayBrake
forward controls or custom
applications
•Will accept any male-mount peg
•Mount is 2.9” long and has a 3/8”-16 mounting hole
•Sold in pairs
PART #
DESCRIPTION
DS-253063
Male-peg mounts
•Precision-machined billet T-6 aluminum
•Accept most male-mount pegs and include
3/8” button head peg mounting bolts
1811-2992
•Sold in pairs
PART #
DESCRIPTION
1811-2990
21/2” front peg mounts w/ 3/8”-16 x 11/2” mounting bolts
1811-2991
11/2” rear peg mounts w/ 1/2”-13 mounting holes
1811-2992
11/2” rear peg mounts w/ 3/8”-16 x 2” mounting bolts
•Accept all standard male
mount pegs
•1/2”-13 threads
•Sold in pairs
PART #
DESCRIPTION
DS-253596
Short Magnum peg mounts
SUG. RETAIL
$64.95
SUG. RETAIL
$29.95
FOOTPEG MOUNTS
•Add pegs where you
want them
•CNC-machined from
billet 6061 T-6 aluminum
•Fit all standard male style pegs
•Measure 1.5” x 1” diameter
•Sold in pairs
PART #
DESCRIPTION
HPB-590
Footpeg mounts
COVERS,
SECURITY
& GENERAL
1058
•Uses Küryakyn’s
Magnum Quick Clamps and Clevis
mounts for custom male-mount
footpeg installation
•11/2” diameter clamping area makes these
ideal for use on engine guards
•Beautiful chrome finish
•Sold in pairs
PART #
DESCRIPTION
1624-0151
Universal Criuse Peg mounts w/
11/2” Magnum Quick Clamp
SUG. RETAIL
$75.95
HIGHWAY FOOTPEG
CLAMP AND
MOUNT SETS
•Three-piece design
features chrome-plated
steel clamp with billet 6061 T-6 aluminum
footpeg mount
HCM-208
•State-of-the-art design resists slipping
•Available in 1”, 11/8” and 11/4” dia.
•Sold in pairs
PART #
DESCRIPTION
SUG. RETAIL
HCM-208 1” dia. clamps for aftermarket and some H-D
$52.95
52.95
HCM-209 11/8” dia. clamps for H-D frame down-tubes
HCM-210 11/4” dia. clamps for main H-D engine guard size
52.95
SUG. RETAIL
$33.95
11/4” CLAMP-ON
PEG MOUNTS
•Chrome-plated
die-cast design
•Accept male mount
footpegs only
•Sold in pairs
PART #
DESCRIPTION
DS-203000
11/4” peg
mounts
TWO-PIECE FOOTPEG CLAMPS
SUG. RETAIL
$49.95
CHROME
UNIVERSAL
ACCESSORY
MOUNTS
FOR 1” TUBING
•Chrome-plated CNC-machined
billet aluminum
•Fit 11/4” engine guards or frame
•Accept male-mount pegs
•Sold in pairs
PART #
DESCRIPTION
1611-2123
Footpeg clamps; repl. OEM #50957-02
SUG. RETAIL
$52.95
CHROME CLAMP FOR FOOTPEG BARS
•Chrome mounts with universal fitment
may be used to mount driving lights,
footpegs and many other types of accessories
•Fit 1” diameter tubing
•Sold in pairs
PART #
DESCRIPTION
DS-720218
Chrome universal mounts
•Includes clamps, tapered washers and
all necessary nuts and bolts
•Allows installation of footpeg bars to 1” or 11/4”
frame members
PART #
DESCRIPTION
DS-243803
Chrome clamp assembly (ea.)
SUG. RETAIL
$6.25
SUG. RETAIL
$29.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$75.95
75.95
75.95
UNIVERSAL
CRUISE PEG
MOUNTS
SHORT MAGNUM
PEG MOUNTS
BRAKES
DASHES
& GAUGES
CHROME FOOTPEG MOUNTS
CHROME
FOOTPEG MOUNTS
CABLES
TANKS &
OIL FILTERS
1811-2991
THREE-PIECE FRAME CLAMPS
MAGNUM™ QUICK CLAMPS
•Stainless steel construction
•1/2” mounting hole
•Sold each
PART NO.
DESCRIPTION
1624-0125 11/4” i.d. fits H-D engine guards (pr.)
1624-0126 11/2” i.d. fits some engine guards and Boss Hoss (pr.)
PRICE
$39.95
42.95
•Heavy-duty, chrome-plated three-piece clamps can
be used for mounting exhausts, brake switches, footpegs,
driving lights or other custom applications
•Sold each
PART #
DESCRIPTION
7/8”
2404-0362
2404-0365
1”
2404-0366
11/8”
2404-0363
11/4”
2404-0364
11/2”
SUG. RETAIL
$7.95
7.95
7.95
7.95
7.95
SECTION
DS-720185
DS-720192
7807-0115
18
WINDSHIELDS
TOURING
7807-0114
LUGGAGE
Back view
SEATS &
SISSY BARS
CHROME RADIUS LICENSE PLATE MOUNTS
•Radius license plate mounts offer a unique custom look
•Custom style available in small radius for fenders up to 8” wide
and large radius for fenders 8” and wider
7807-0116
•Both sizes require custom installation; mount using vertical studs on a backing plate
•Three-bolt style fits most OEM fenders that have three-hole bolt pattern (not for bobbed fenders)
•Weld-on style available in concave or convex radius that requires welding of included “tab” for installation; designed to be mounted vertically
•All mounts include frame, backing plate and hardware
•Accepts most 4” x 7” license plates
NOTE: Check tire-to-fender clearance before operating.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
CUSTOM STYLE
THREE-BOLT STYLE
DS-720185
Small radius
$56.95 7807-0114
Three-bolt hole
DS-720192
Large radius
56.95
SUG. RETAIL
$68.95
PART #
DESCRIPTION
WELD-ON STYLE
7807-0115
Concave
7807-0116
Convex
DS-270120
EXHAUST
FUEL/AIR
SYSTEMS
SUG. RETAIL
$68.95
68.95
ENGINE
TRANSMISSION
& DRIVELINE
DS-270119
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
LICENSE PLATE/
TAILLIGHT BRACKETS
BILLET LICENSE
PLATE MOUNT
•Brackets mount a cat eye taillight, either
as a direct bolt-on replacement for stock
80-86 FXWG and 84-99 FXST rear fenders, or on 73-85 FX models with our
Quickbob fender (DS-380032)
PART #
DESCRIPTION
SUG. RETAIL
DS-270120
For FX with Quickbob
$45.95
DS-270119
For FXST and FXWG
28.95
•Chrome-plated
billet aluminum
•Eliminates the OEM turn signal bar, fits under stock and most
aftermarket taillights
•Designed for 7” x 4” license plates
•Can be used with most license plate frames, sold separately
•Includes brackets to allow the removal of the OEM license plate
mount bar
CABLES
BRAKES
TANKS &
OIL FILTERS
NOTE: Use of this license plate mount will require custom mounting of
rear turn signals. On certain models, mounting holes may need to be
enlarged to 5/16”.
PART #
DESCRIPTION
SUG. RETAIL
DS-270110 For 91-08 FLT, FLHT, FLHR, 78-84 FLH and 86-09 FLST
models (except FLSTS/FLSTF, 05-09 FLSTN)
$122.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-720133
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-720134
LAYDOWN LICENSE
PLATE MOUNTS
CHROME LICENSE PLATE MOUNT
•Chrome 4” x 7” mount comes with dual rubber
gaskets, allowing the angle of the mount to be
raised or lowered to meet your needs
•All necessary hardware is supplied
PART #
DESCRIPTION
DS-720814 For 55-09 models w/ the license plate mounted
to the fender above the taillight
SUG. RETAIL
$26.95
•Customized chrome lay-down style license
plate mounts
•Replaces the upright OEM mount
•Bolts to the mounting tab on the OEM taillight
•Includes a chrome support bracket and chrome hardware
•Accepts most standard size license plate frames
PART #
DESCRIPTION
FOR 97-03 FLSTS, 05-07 FLSTSC
DS-720133
Steel
DS-720134
Billet
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
SUG. RETAIL
$49.95
62.95
COVERS,
SECURITY
& GENERAL
1059
SECTION
18
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
CHROME LICENSE
PLATE FRAME
LED LICENSE
PLATE FRAME
•Chrome die-cast metal frame
•Measures 4” x 7”
•Includes chrome
flat-head hardware
PART #
2030-0214
•Chrome-plated frame features two rows of LEDs
•Includes red and clear diamond-style lenses
•Lights can be wired for tag light, taillight or brake light
DESCRIPTION
4” x 7” license plate frame
SUG. RETAIL
$24.95
PART #
DS-720665
DESCRIPTION
Fits 4” x 7” license plates
SUG. RETAIL
$56.95
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
GROOVED LICENSE PLATE FRAME
LED LICENSE PLATE FRAME
•Die-cast frame with a chrome finish
•Hidden mount design for a smooth look
•Features eight dual-function LEDs that can be wired in as additional
taillight/brake light and four LED tag lights
PART #
2040-0045
DESCRIPTION
LED license plate frame
•Ball-end-milled aluminum license plate frame designed for use with OEM
taillight bracket
•Frame measures 83/8” x 47/8”
PART #
DS-720833C
DESCRIPTION
For 84-05 FXST and 80-86 FXWG models
SUG. RETAIL
$49.95
SUG. RETAIL
$41.95
DS-720813
CABLES
BRAKES
DS-720812
TANKS &
OIL FILTERS
DS-720808
DS-720809
EAGLE SPIRIT LICENSE PLATE FRAMES
“LIVE TO RIDE” LICENSE PLATE FRAMES
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
•Chrome die-cast license plate frames
•Gold or chrome eagle and script embossed on the top of each plate
•Measure 5” x 7”
•Sold each
•Chrome- or gold-plated “Live to Ride” license plate frame
•Features an eagle perched at the top
•Center to center on the mounting holes measures 6” x 23/4”
PART #
DS-720808
DS-720809
DESCRIPTION
Gold
Chrome
SUG. RETAIL
$16.95
12.95
FOOTRESTS
& LICENSE
PLATE FRAMES
COVERS,
SECURITY
& GENERAL
1060
DESCRIPTION
Eagle Spirit license plate frame, gold
Eagle Spirit license plate frame, chrome
SUG. RETAIL
$53.95
29.95
AUTOMOTIVE
LICENSE
PLATE FRAME
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
PART #
DS-720812
DS-720813
•Chrome-plated frame
features a skull
design; sized to fit
most automobile
license plates (12” x 6”
license plates)
•A great addition
to the truck,
trailer or car
•Sold each
CHROME LICENSE
PLATE FRAME
•Chrome die-cast
4” x 7” frame
PART #
DS-270220
DESCRIPTION
License plate frame
SUG. RETAIL
$7.95
PART #
2030-0296
DESCRIPTION
License plate frame
SUG. RETAIL
$19.95
SECTION
18
WINDSHIELDS
TOURING
RADIUS BEND LICENSE/
LIGHT BACKING PLATE
backing plate bolts onto stock fender
•Features curved lines, radius edges
and the Ness grooves on the face of
the frame, with no visible mounting
hardware for that sleek custom look
•Designed with a 30° bend on the taillight mounting section for more
visibility on short fender applications
•Provides a solid mount for a Cat Eye taillight (sold separately)
•Frames and taillights sold separately
PART #
DESCRIPTION
SUG. RETAIL
DS-720849
For 55-09 Harley (exc. FLSTS, FXST,
FXDWG, FXWG and VRSCA)
$127.95
1905-0254
LUGGAGE
CHROME LICENSE BACKING PLATES
•Available in billet aluminum
•Comes with all hardware
•Sold each
PART #
DESCRIPTION
FOR 55-09 HARLEY
(EXCEPT FLSTS, FXST, FXSTD, FXDWG, FXWG AND VRSCA)
1905-0254
Rad II
DS-720848
Radius grooved
DS-720848
SEATS &
SISSY BARS
SUG. RETAIL
$116.95
108.95
EXHAUST
FUEL/AIR
SYSTEMS
1905-0226
ENGINE
DS-720187
DS-720850
DS-720189
ALTERNATIVE LICENSE PLATE FRAMES
•Die-cast radius design blends the frame
and backing plate together as one
•May be used with the Ness-Tech® matching backing plate or alone
•Features hidden mounting hardware
•Available with stepped or grooved design
•Measures 7” x 41/16” o.d., with a 63/8” x 33/8” window size and
53/4” x 23/4” mounting pattern
PART #
DESCRIPTION
SUG. RETAIL
DS-720187
Stepped
$49.95
DS-720189
Grooved
49.95
LICENSE PLATE FRAME
•Fully machined, chrome
license plate frame for
71/4” x 41/4” license plates
•Designed to accept Ness-Tech®
backing plates but will fit others
•Comes complete with socket
bolts and nylon locknuts
PART #
DS-720196
DESCRIPTION
Chrome
SUG. RETAIL
$53.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
DS-720847
ELECTRICAL
2030-0139
CHROME LICENSE PLATE FRAMES
•CNC-machined from 6061 T-6 aluminum
•Lighted LED license functions as a brake and taillight
•Feature the Rad II or curved line design in a smooth or grooved style
•No exposed mounting hardware; bolts from the back side
•Rad II frame looks best when used with the Ness-Tech® Rad II backing
plate PART #1905-0254; the radius license plate frames look best when
used with backing plate PART #DS-720848, but will work with others
•Accept most 71/4” x 41/4” license plates
PART #
DESCRIPTION
SUG. RETAIL
1905-0226
Rad II
$74.95
DS-720850
Radius smooth
63.95
DS-720847
Radius grooved
63.95
2030-0139
Radius w/ light
67.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
BILLET LICENSE
PLATE FRAMES
DS-720160
•A necessity for any full-custom project;
a huge impact in a high-profile area on
any custom job
•CNC-machined to a jewel-like finish,
then polished and Cobra
Chrome-plated
•Mounting holes measure
PART #
53/4” x 2 3/4” on center
BLV59000
DS-720170
LICENSE PLATE FRAMES
WITH LINED LENS
•Distinctive frames are made of ABS plastic
with acrylic lenses, and feature a silk-screened line design
•Available with or without border to accept different size plates
•Fits up to 4.9” x 8.2” plate size
U.S. Patent #284,848.
PART #
DS-720160
DS-720170
DESCRIPTION
Chrome w/ lined lens
Chrome w/ lined lens and border
SUG. RETAIL
$39.95
39.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DESCRIPTION
71/4” x 41/4”
SUG. RETAIL
$45.95
TIRES,
TUBES &
WHEELS
LICENSE PLATE FRAME
ASSEMBLY WITH LED LIGHT
HARDWARE,
CHEMICALS
& TOOLS
•Machined from 6061 billet aluminum
with a show-polished finish
•Features LED light for plate visibility
•Accepts 41/8” x 71/8” license plates
•For custom applications
PART #
DESCRIPTION
2030-0293 License plate frame assembly w/ LED plate light
FOOTRESTS
& LICENSE
PLATE FRAMES
SUG. RETAIL
$60.95
COVERS,
SECURITY
& GENERAL
1061
SECTION
18
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
2030-0012
Back view
2030-0012
2030-0011
2030-0013
Back view
2030-0013
IN CLOSE LICENSE PLATE HOLDER
•Billet aluminum with no visible fasteners
•Most tucked-in holder on the market today
•Mounts off the axle on FXST/FLST model applications and off the axle adjuster on FXD/XL applications (3/4” axles only)
•Available with or without illumination
•Available in chrome and black powder-coat finish
•Not for use with shock relocation kits or saddlebags
PART #
CHROME
2030-0338
2030-0334
2030-0011
2030-0324
2030-0340
2030-0336
2030-0185
2030-0332
2030-0012
2030-0326
2030-0184
2030-0330
2030-0013
2030-0328
DESCRIPTION
For
For
For
For
For
For
For
For
For
For
For
For
For
For
08-09
08-09
86-07
86-07
08-09
08-09
06-07
06-07
91-05
91-05
05-07
05-07
86-04
86-04
SUG. RETAIL
FXST/FLST w/o plate light
FXST/FLST w/plate light
Dyna models w/o plate light
Dyna models w/plate light
FXD w/o plate light
FXD w/plate light
XL w/o plate light
XL w/plate light
XL w/o plate light
XL w/plate light
$199.95
229.95
199.95
229.95
199.95
229.95
199.95
229.95
199.95
229.95
199.95
229.95
199.95
229.95
PART #
BLACK
2030-0339
2030-0335
2030-0257
2030-0325
2030-0341
2030-0337
2030-0262
2030-0333
2030-0258
2030-0327
2030-0261
2030-0331
2030-0259
2030-0329
DESCRIPTION
For
For
For
For
For
For
For
For
For
For
For
For
For
For
08-09
08-09
86-07
86-07
08-09
08-09
06-07
06-07
91-05
91-05
05-07
05-07
86-04
86-04
SUG. RETAIL
FXD w/o plate light
FXD w/plate light
XL w/o plate light
XL w/plate light
XL w/o plate light
XL w/plate light
$199.95
229.95
199.95
229.95
199.95
229.95
199.95
229.95
199.95
229.95
199.95
229.95
199.95
229.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
BRAKES
TANKS &
OIL FILTERS
DASHES
& GAUGES
LICENSE PLATE
FRAME WITH LEDS
2030-0093
•Aluminum construction
•Blind-hole design for a clean line
•Available with chrome or black powder-coat finish
•Available with or without plate lights
•Fits all 4” x 7” license plates
NOTE: Lighting is not DOT approved.
PART #
2030-0014
FRAMES,
SUSPENSION
& FENDERS
DESCRIPTION
License plate frame w/ LEDs
SUG. RETAIL
$99.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1062
PART #
2030-0093
2030-0322
2030-0260
2030-0323
DESCRIPTION
Chrome
Chrome w/ plate lights
Black powder-coat
Black powder-coat w/ plate lights
SUG. RETAIL
$29.95
59.95
29.95
59.95
0902-2002
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
2030-0260
BEVELED LICENSE PLATE FRAME
•Polished aluminum with
a chrome finish
•Dual-function red LEDs
•Can be used in run/turn or run/stop applications
•Includes instructions for wiring
•Requires custom installation
2030-0138
LICENSE AND TAILLIGHT
MOUNTING BRACKETS
CHROME LICENSE PLATE FRAMES
•Blind-hole design features mounting studs hidden
on the back for an ultra-clean appearance
•Traditionally styled through-hole license plate frame
uses countersunk mounting bolts (not included)
•CNC-machined from solid plate aluminum
•Fits most 4” x 7” plates
•20° rake gives more tire clearance for lowered bikes
•Accept most flat-backed taillights with a 21/2”
center-to-center mounting bolt configuration
(must be purchased separately)
PART #
0902-2001
0902-2002
DESCRIPTION
For 84-02 FXST
For 96-01 FXDWG
2030-0137
SUG. RETAIL
$185.95
185.95
PART #
2030-0138
2030-0137
DESCRIPTION
Blind-hole plate frame
Through-hole plate frame
SUG. RETAIL
$39.95
36.95
SECTION
18
WINDSHIELDS
TOURING
2030-0136
DS-270015
2030-0135
STYLE KING BILLET LICENSE
PLATE BRACKET WITH FRAME
SEATS &
SISSY BARS
DS-270104
•Holds the plate at a lay-back angle
•CNC-machined from solid plate aluminum
•Fits most 4” x 7” plates
•Fully chromed; choice of smooth or ball-milled design
•Mounts to the chrome back bar; attaches with two bolts
•Will not fit models with Tour Pak
PART #
DESCRIPTION
FOR 84-08 FLT/FLHT (EXCEPT 04-08 FLHR/S)
2030-0135
Ball-milled
2030-0136
Smooth
LUGGAGE
SIDE MOUNT TAG LIGHT/
LICENSE PLATE ASSEMBLY
SUG. RETAIL
$149.95
149.95
•Machined from 6061 T-6 billet aluminum;
polished and chrome-plated
•Mount is sold separately
•Mount can be rotated 15° to get the best look for your application
•Includes a blind hole license plate frame (4” x 7”) and Allen bolts
PART #
DS-270104
DS-270015
DESCRIPTION
Vertical mount tag light/license assembly
Mounting kit for 87-07 FLST/C, 00-05 FXST
SUG. RETAIL
$321.95
101.95
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
CURVED LAYDOWN
LICENSE PLATE MOUNT
•Ball-milled with a
chrome-plated finish
•Mount matches the curve of the
rear fender for a smooth,
clean appearance
•Includes curved license
plate frame
•For 4” x 7” plates
PART #
2030-0300
ELECTRICAL
SWEPT EAGLE
LICENSE PLATE FRAME
DESCRIPTION
For For 97-08 FLHT, 97-08 FLHR
(except 07-08 FLHRSE), 98-08 FLTR
SUG. RETAIL
$79.95
•Chrome-plated ABS frame with
chrome-plated steel backing plate
•Backing plate is drilled for
universal mounting, or mount in
place of stock license plate bracket
•Fits 4” x 7” plates
PART #
2030-0299
DESCRIPTION
For 97-08 FLHR, FLTR, FLHT
LIGHTING
SUG. RETAIL
$59.95
2030-0144
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
CURVED SIDE-MOUNT
LICENSE PLATE HOLDER
•Built-in license plate light
•Sized to fit 4” x 7” license plates
NOTE: Softail applications are
compatible with or without
Küryakyn swingarm covers.
PART #
2030-0266
2030-0195
2030-0197
DESCRIPTION
For 07-09 FXST/FLST
For 86-06 Softail
For 90-05 Dyna,
86-07 XL
BALL-MILLED LICENSE
PLATE FRAMES
•Glistening chrome finish with
ball-milled accents
•Two sizes to fit most plates
(minor modifications to some
plates may still be necessary)
PART #
DESCRIPTION
2030-0144
Small frame (fits 4” x 7” plates)
2030-0145
Large frame (fits 43/8” x 8” plates)
SUG.
RETAIL
$129.95
129.95
129.95
2030-0195
BRAKES
TANKS &
OIL FILTERS
SUG. RETAIL
$29.95
29.95
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
LICENSE PLATE ASSEMBLY WITH INSERTS
•Chrome-plated, die-cast frame uses removable inserts so it can
accommodate large (43/8” x 8”) or small (4” x 7”) license plates
•Fasteners that secure frame to the backing plate
are installed from the rear
•Frame must be installed on mounts that measure less than 81/4” wide
•Includes backing plate, frame and inserts
PART #
2030-0189
DESCRIPTION
License plate frame w/ inserts
SUG. RETAIL
$59.95
CURVED LICENSE PLATE MOUNT WITH FRAME
•Adds the finishing touch to Küryakyn’s Tombstone Taillights
•Mounts to the existing holes on the Tombstone Taillight base plate
(PART # 2010-0083 or 2010-0084)
•Two-piece design encapsulates any 4” x 7” license plate
PART #
2030-0191
DESCRIPTION
Curved license plate frame
SUG. RETAIL
$69.95
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1063
SECTION
18
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
CURVED LAYDOWN LICENSE
PLATE MOUNT WITH FRAME
LICENSE PLATE FRAME
FOR KÜRYAKYN TURN SIGNAL BAR
•Curved backing plate and frame meet cleanly for a finished look
•For use on any H-D model with the standard
3-bolt mounted license plate bracket
•Curved license plate frame is designed to mount on
Küryakyn’s rear turn signal bar (PART #2040-0421)
•Accepts 4” x 7” license plates
PART #
2030-0192
PART #
2030-0193
DESCRIPTION
Curved laydown license plate mount w/ frame
SUG. RETAIL
$69.95
DESCRIPTION
Curved license plate frame
SUG. RETAIL
$59.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
CURVED LICENSE
PLATE MOUNT
WITH FRAME
ELECTRICAL
LAYDOWN LICENSE PLATE HOLDER
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
•Give your bike a sleeker look
•Bracket complements the lines of the fender,
mounts in the same location as stock
PART #
2030-0198
DESCRIPTION
For 94-08 Road King and Road Glide
models w/o Tour-Pak®
SUG. RETAIL
$39.95
•Replaces the stock
black bracket
•Curved look matches
the flow of the
rear fender
•Requires no
drilling to install
and uses stock
license plate light
PART #
2030-0265
DESCRIPTION
For 06-09 FLHX
SUG. RETAIL
$69.95
CABLES
BRAKES
“WHISKERS”
LICENSE PLATE
FRAME RETROFIT
LED KIT
TANKS &
OIL FILTERS
2030-0347
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1064
BLHK01
CHROME “WHISKERS” LED
•Milled 6061 billet aluminum license plate with brilliant
chrome plating and even brighter LED lighting
•Frame fits 71/8” x 41/16” plates
•Available in three styles: amber LED, red LED and red/
amber LED; red/amber LED changes from red to amber
when turn signals are activated, making it perfect for
supplementary run/turn or brake/turn lighting
•Red LED version can be used as supplementary run/
brake/turn lighting if used with Badlands’
Illuminator module
•Chrome mounting hardware sold separately
PART #
2030-0347
2030-0348
2030-0349
BLHK01
DESCRIPTION
Amber LED
Red LED
Red/amber LED
Mounting hardware kit
SUG. RETAIL
$159.95
159.95
179.95
11.95
•Replace the halogen lighting
in the original “Whiskers” license plate
frames with bright LED
•Up to three times brighter than
the original halogen lighting
•Same LED strips as used in the new
LED “Whiskers” license plate frames
•Available in amber, red or red/amber;
red/amber switches from red to
amber when turn signal is activated,
making it ideal for supplementary
running/turn or brake/turn lighting
•Kit includes everything needed
to upgrade from halogen to LED
2040-0501
PART #
2040-0500
2040-0501
2040-0502
DESCRIPTION
Amber
Red
Red/amber
SUG. RETAIL
$69.95
69.95
89.95
CHROME LICENSE PLATE FRAME
•Milled from 6061 T-61/4” plate aluminum,
then ball-milled and chromed for
a show-quality finish
•Chromed mounting hardware included
•Backing plate not included
PART #
BLLPF02
DESCRIPTION
Chrome license plate frame
SUG.
RETAIL
$50.95
SECTION
18
WINDSHIELDS
TOURING
2030-0000
LUGGAGE
LICENSE
PLATE MOUNT
LED
DIRECTIONAL
LICENSE FRAME
•Chrome billet aluminum construction
•Features amber or red LEDs in standard
or sequential design
•Fits most 4" x 7" plates
•Optional tag light illuminates the license plate;
fits inside the frame
LICENSE PLATE
TAILLIGHT ASSEMBLY
•Complete hot rod side mount
•Made from powder-coated 3/8” steel with 3/4”
hole in mounting
•Additional plain red lens included
•May require some minor modification
PART #
2010-0588
DESCRIPTION
For custom
applications
2030-0292
SUG. RETAIL
PART #
2030-0000
2030-0001
2030-0002
2030-0292
$173.95
DESCRIPTION
SUG. RETAIL
Sequential red
$179.95
Sequential amber
179.95
Non-sequential red
179.95
Tag light for license
plate frame
14.95
SEATS &
SISSY BARS
•Do it yourself,
weld-on, universal-fit
plate holder
•Laser-cut from 1018
steel with raw finish
•Features the CFL logo
•Accepts standard-size license plates
•Fits left side of bike
•Mounting bungs included
•Also has a tab for single-bolt taillights
•Measures 4" x 7"
EXHAUST
FUEL/AIR
SYSTEMS
NOTE: Requires welding the mounting bungs
onto bike frame.
PART #
2030-0315
DESCRIPTION
Vertical side-mount
plate holder
SUG. RETAIL
ENGINE
$139.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
DS-272364
DS-272366
7805-1414
ELECTRICAL
LIGHTING
7805-1416
HANDLEBARS,
CONTROLS
& MIRRORS
DS-272365
7805-1415
7805-1417
CABLES
LED LICENSE PLATE FRAME
•Die-cast aluminum with a chrome or black powder-coat finish
•Available with or without LED lights
•Accepts most 4" x 7" license plates (may require redrilling license plate)
•Optional mounting hardware kits sold separately
•Made in U.S.A.
PART #
DESCRIPTION
SUG. RETAIL PART #
DESCRIPTION
CHROME FRAMES
BLACK FRAMES
7805-1414
Dual row LED
$84.95 7805-1415
Dual row LED
DS-272364
Single row LED
59.95 DS-272365
Single row LED
DS-272366
Single row LED
59.95 7805-1417
Standard, no LED
7805-1416
Standard, no LED
23.95
BRAKES
DS-190036
SUG. RETAIL
$84.95
59.95
23.95
PART #
DESCRIPTION
MOUNTING HARDWARE
DS-190036
Chrome
DS-190037
Black
DS-190037
SUG. RETAIL
$10.95
10.95
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
DS-720175
FOOTRESTS
& LICENSE
PLATE FRAMES
DS-720195
CHROME
LICENSE
BACKING PLATE
CUSTOM BILLET
PART #
DS-720099
HARDWARE,
CHEMICALS
& TOOLS
•Chrome billet aluminum construction
•Available in ball-milled or smooth designs
•Chrome billet backing
plate available
in a smooth design
•Measures 4" x 7"
DESCRIPTION
Smooth backing plate
SUG. RETAIL
$39.95
PART #
DS-720175
DS-720195
DESCRIPTION
Ball-milled, (71/4" x 41/4")
Smooth, (71/4" x 41/4")
TIRES,
TUBES &
WHEELS
SUG. RETAIL
$50.95
50.95
COVERS,
SECURITY
& GENERAL
1065
SECTION
18
WINDSHIELDS
TOURING
LUGGAGE
SEATS &
SISSY BARS
2030-0240
WARRIOR 1
LICENSE
PLATE FRAME
•CNC-machined aluminum
•Hidden mounting holes for a clean, smooth look
•Fits most 4" x 7" license plates
PART #
2030-0270
DESCRIPTION
Black
SUG. RETAIL
$67.95
2030-0241
EXHAUST
FUEL/AIR
SYSTEMS
ENGINE
•Machined dimpled finish for style
CONTOURS
LICENSE PLATE TRIM
•Chrome-plated accent trim
for 4" x 7" license plates
•Includes chrome mounting hardware
•Universal fitment
PART #
2030-0250
PART #
2030-0240
2030-0241
DESCRIPTION
Contours license plate trim
DESCRIPTION
Black
Chrome
SUG. RETAIL
$75.95
75.95
SUG. RETAIL
$22.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
WITH RED LED
RAISED LICENSE
PLATE HOLDER
•Chrome die-cast construction
with dual function running/
brake light
•Illuminates license plate
for added visibility
•Fits standard 4" x 7"
license plates
•Chrome ABS license plate
holder with dual-function
LED run/brake light
•Fits standard 4" x 7"
license plates
PART #
2030-0251
DESCRIPTION
License plate holder with red LED
SUG. RETAIL
$102.95
PART #
2030-0253
DESCRIPTION
Raised license plate holder
SUG. RETAIL
$86.95
CABLES
BRAKES
TANKS &
OIL FILTERS
CONTOURS LED
LIGHTED LICENSE
PLATE FRAME
•Chrome ABS license plate holder
with multi-function LED run/
brake/turn lights
•Fits standard 4" x 7" license plates
PART #
2030-0252
DESCRIPTION
Contours LED license plate
SUG. RETAIL
$96.95
DASHES
& GAUGES
•Features 12 LED lights;
can be wired to light
continually or only when brakes are applied
•Chrome-plated housing with red lens
•Adds a superb eye-catching look to any bike
PART #
DS-720176
DESCRIPTION
Lighted license plate frame
SUG. RETAIL
$49.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1066
CHROME LICENSE
PLATE HOLDER
WITH LED
•Die-cast chrome plate
with three LED strips
•Top row of LEDs can be used as auxiliary running or brake light; side rows
can be used as auxiliary marker lights
•Accommodates 7" W x 4" H to 81/2" W x 43/8" H plates
•Outer frame measures 91/8" W x 51/8" H x 3/4" D
NOTE: Not DOT approved.
PART #
2030-0141
DS-720803
DS-720801
DESCRIPTION
LED license plate holder
SUG. RETAIL
$129.95
DS-720805
SPECIALTY LICENSE
PLATE FRAMES
•Available in chrome
•Three unique styles: nugget, chain link,
and twisted metal
PART #
DS-720801
DS-720803
DS-720805
DESCRIPTION
Nugget style, chrome
Chain-link style, chrome
Twisted style, chrome
SUG. RETAIL
$12.95
14.95
14.95
SECTION
18
WINDSHIELDS
MCA-592
MC-592-1
DS-270225
EAGLE LICENSE PLATE FRAMES
PART #
MCA-592
MC-592-1
•Die-cast license plate frames, available in chrome
or gold
•Three-dimensional eagle emblem centered on top
of the frame
PART #
DS-270225
DS-270226
LUGGAGE
•Die-cast frame surrounds all 7" x 4" plates
•Available in chrome or black chrome
•Skin-packed on a display card
•Sold each
DS-270226
DESCRIPTION
Eagle license plate frame, chrome
Eagle license plate frame, gold
DESCRIPTION
Chrome frame
Black chrome frame
SUG. RETAIL
$5.95
5.95
FUEL/AIR
SYSTEMS
SIDE-MOUNT LICENSE PLATE
AND TAILLIGHT BRACKETS
•Simple and sturdy way to mount
a license plate
•PART #s 2030-0345 and 2030-0346 accept
most cat eye style brake lights
•Mounts horizontally to most 3/4" axles
•Made from tough stainless steel for
durability and great finish
•Chrome-plated stamped steel
•Slotted holes to fit most plates;
measures 7" x 5"
•Accepts most license plate frames
PART #
DS-720156
DESCRIPTION
For 97-08 FLHT, FLHR and FLTR models
SUG. RETAIL
$29.95
PART #
2030-0343
2030-0344
2030-0345
2030-0346
ENGINE
2030-0343
2030-0346
DESCRIPTION
Left side
Right side
Fit cat eye lights, left side
Fit cat eye lights, right side
SUG. RETAIL
$68.95
68.95
71.95
71.95
CAT EYE TAILLIGHT/
LICENSE PLATE
MOUNT BRACKET
LICENSE PLATE MOUNT
PART #
DS-270101
SUG.
PART #
DESCRIPTION
RETAIL
FOR 91-08 FLT, 78-84 FLH AND 86-09 FLST
(EXCEPT FLSTS, FLSTF AND 05-09 FLSTN)
1905-0000 License plate mount
$59.95
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
•Allows a cat eye taillight to be
flush-mounted along with a license
plate, giving a clean, custom look
•Taillight sold separately
•Made of 303 stainless steel
•Relocates license plate under taillight
•Can be used with or without OEM
or aftermarket light bars
SEATS &
SISSY BARS
EXHAUST
SUG. RETAIL
$8.95
15.95
SLANTED
LICENSE PLATE
BACKING PLATE
TOURING
LIGHTING
DESCRIPTION
SUG. RETAIL
Taillight/license plate
mount bracket
$22.95
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
REPLACEMENT LICENSE PLATE BRACKET
•Chrome replacement license plate bracket
•Mounts to most custom fenders and is adjustable
to accept almost any license plate
PART #
DESCRIPTION
DS-193810 For most Harleys (except FXWG,
FXDWG, FLSTS, FXST and FLT); repl.
OEM #s 59626-84 and 59983-75
BRAKES
LICENSE PLATE SIDE
MOUNT BRACKET
SUG.
RETAIL
•Used with all license plates
that have a three-hole
mounting pattern; mounts
the license plate on the
left side of the swingarm
$18.95
PART #
DESCRIPTION
FOR 87-99 FXST/FLST
DS-270121
Side mount bracket
TANKS &
OIL FILTERS
SUG. RETAIL
DASHES
& GAUGES
$121.95
FRAMES,
SUSPENSION
& FENDERS
BAG-IT!™
•Now all bikes can
have easy-access
storage space
•Works on any U.S. license
plate bracket and with
any Harley-Davidson
windshield bag or any
bag with a 1" W spaced
bag bracket attached to the bag
•Made of one-piece stamped steel with chrome plating
•Installation is no harder than putting on a license plate
•Features additional holes for added mounting points (should the rider desire it) or allows for
virtually any type of small bag to be mounted (bag not included)
LICENSE PLATE BAR ELIMINATOR
•Allows you to retain the stock saddlebag
support brackets when removing the license
plate support tube
•Made of 10-gauge steel with a chrome polish
•Sold in pairs
PART #
2030-0256
DESCRIPTION
For 97-08
FLT/FLHT models
SUG. RETAIL
$29.95
NOTE: Requires at least 7" of clearance from the top edge of your license plate to anything above
the license plate that may interfere with the Bag-It!.
PART #
3550-0056
DESCRIPTION
Bag-It!
SUG. RETAIL
$49.95
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1067
SECTION
18
After
WINDSHIELDS
0521-0683
1802-0006
Before
1801-0018
FRAME TUBE HOLE PLUGS
•Fill the holes in the rear frame tubes when
you remove the stock license plate bar on Dresser models
•Billet aluminum construction with a chrome finish
•Sold in pairs
TOURING
0521-0046
LUGGAGE
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
PART #
1802-0006
1801-0018
DESCRIPTION
Round tip hole plugs
Bullet tip hole plugs
PYRAMID COVERS
•The Pyramid covers the three holes on the rear
fender (above the stock or Eliminator taillight) when
relocating the license plate mount
•Available in polished chrome-plated aluminum
or black construction
PART #
FOR 86-09 FLST, 99-03 XL
AND 99-09 FXD DYNA MODELS
0521-0046 Chrome
$29.95
PART #
FOR 86-09 FLST, 99-03 XL
AND 99-09 FXD DYNA MODELS (CONT)
0521-0683 Black
$29.95
REAR BAR ACCENT
•Covers up the exposed license
plate mounting bosses when the license plate is moved from the rear bar
•Quick, easy way to add a custom touch
PART #
0521-0443
ENGINE
DESCRIPTION
For 97-08 FLHR (except 07 FLHRSE), 98-08 FLTR,
97-08 FLHT (04 FLHTCSE requires antenna relocation)
ELECTRICAL
LIGHTING
•Covers the exposed
holes in the
2030-0263
fender when
the stock license plate bracket is removed
•Completely cover the "footprint" left by the stock mount
•Sold each
2030-0264
LICENSE PLATE
MOUNTING GASKETS
PART #
DESCRIPTION
SUG. RETAIL
FOR ALL H-D MODELS WITH STANDARD 3-BOLT FENDER-MOUNTED
LICENSE PLATE BRACKET
2030-0263 Cover w/ interchangeable Maltese Cross or Skull emblem
$29.95
2030-0264 Tribal cover
19.95
2030-0242
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
2030-0243
2030-0244
2030-0245
COVERS,
SECURITY
& GENERAL
1068
PART #
2030-0015
2030-0016
PART #
2030-0094
2030-0095
MILITARY STICKER PLATES
•Made of 16-gauge steel
•Has a surface area of 2" x 6" for military base sticker
•PART #s 2030-0242 and 2030-0243 mount on front
forks, using the two brake caliper bolts on 00-07
Big Twins and Sportsters
•PART #s 2030-0244 and 2030-0245 mount on frame down tubes
•Available with chrome or black powder-coat finish
DESCRIPTION
Flat style
Wedge style
SUG. RETAIL
$2.95 (ea.)
2.95 (ea.)
PART #
2030-0242
2030-0243
2030-0244
2030-0245
DESCRIPTION
Caliper mount; chrome
Caliper mount; black
Down tube mount; chrome
Down tube mount; black
•Texas/Maryland plate has /2"
mounting hole with a 31/2" x 23/8"
square for those states that
have a larger inspection sticker
•Available in chrome or factory
black wrinkle finish
•Choice of three border designs
U.S. patent #416,520 and #430,074
DESCRIPTION
For 11/8" frames
For 11/4" frames
SUG.
RETAIL
$38.95
38.95
PART #
2030-0268
2030-0269
DESCRIPTION
For 13/8" frames
For 11/2" frames
SUG.
RETAIL
$51.95
51.95
INSPECTION
STICKER PLATE
SUG. RETAIL
$29.95
29.95
29.95
29.95
•Manufactured from
aluminum alloy
•Black vinyl coating to
enhance appearance and provide long-lasting wear
•Sold each
PART #
CH0620
DS-270150
FOOTRESTS
& LICENSE
PLATE FRAMES INSPECTION TAG PLATES
•Show-quality designer plates made
TIRES,
of 6061 billet aluminum
TUBES &
•Side-mount and center-mount plates have 1/2"
mounting hole with a 2 3/4" square for sticker
WHEELS
1
HARDWARE,
CHEMICALS
& TOOLS
2030-0016
•Black rubber material
•Feature OEM bolt mounting pattern
•Sold in packs of five
•Billet aluminum with
a chrome finish
•Clever design puts the
inspection tag over the
bolt heads so that it can't be removed without
destroying the tag, making it invalid
2030-0095
•Vertically adjustable to the frame for a parallel fit
•Also great for parking permits, beach passes, military passes or any other
type of tag
CABLES
TANKS &
OIL FILTERS
$29.95
NON-REMOVABLE
INSPECTION PLATE
HANDLEBARS,
CONTROLS
& MIRRORS
BRAKES
SUG. RETAIL
2030-0015
LICENSE PLATE
TRANSMISSION MOUNTING
& DRIVELINE HOLE COVERS
GASKETS
& SEALS
SUG. RETAIL
$54.95
54.95
DESCRIPTION
Inspection sticker plate
DS-270151
DS-270152
DS-270154
DS-270155
SUG. RETAIL
$2.95
2030-0267
DS-270153
PART #
SIDE MOUNT
DS-270150
DS-270151
DS-270152
DS-270153
DS-270154
DS-270155
DESCRIPTION
Chrome ball-milled
Chrome triple ball-milled
Chrome triple curve ball-milled
Black ball-milled
Black triple ball-milled
Black triple curve ball-milled
SUG. RETAIL
$32.95
32.95
32.95
26.95
26.95
26.95
2030-0032
PART #
DESCRIPTION
CENTER MOUNT
7805-9999
Chrome ball-milled
2030-0032
Black ball-milled
TEXAS/MARYLAND
2030-0200
Chrome ball-milled
2030-0267
Black ball-milled
SUG. RETAIL
$34.95
26.95
32.95
26.95
SECTION
18
WINDSHIELDS
TOURING
LED LICENSE PLATE MOUNTING KITS
•Available in red or amber
•Can be used as running lights or extra brake lights
•Includes 1/4" bolts, nuts and washers
•Sold in 4-pack
PART #
DS-190405
DS-190406
LED LICENSE PLATE
MOUNTING BOLTS
DESCRIPTION
Red
Amber
SUG. RETAIL
$13.95
16.95
LUGGAGE
•Chrome license plate mounting bolts in a hex shape
•LED light in the center of each bolt; one red and one blue
•LEDs flash; great for wiring to brake lights
PART #
25-9100
DESCRIPTION
LED license plate mounting bolts
SUG. RETAIL
$29.95
EXHAUST
LICENSE PLATE
FASTENERS
•License plate bolt
assembly is complete
with a Phillips head
bolt, two washers and a locking hex nut
•Thread size of the bolt is 10/24" x 5/8" L
•Available in bag of 100
SKULL LED LICENSE PLATE
MOUNTING BOLTS
•Chrome skull license plate bolts
•Feature blue LEDs for lighting up the eyes
PART #
25-9140
DESCRIPTION
Skull LED license plate mounting bolts
SUG. RETAIL
$34.95
PART #
CH-100
FUEL/AIR
SYSTEMS
DESCRIPTION
License plate fasteners (ea.)
SUG. RETAIL
$.50
ENGINE
TRANSMISSION
& DRIVELINE
LP-600
2030-0010
NYLON LICENSE
PLATE FASTENERS
GASKETS
& SEALS
LICENSE PLATE ACORN SET
•Will never corrode, rust or loosen
•Remove and install with fingers
•Sold in bags of 100 bolts and nuts
PART #
LP-600
2030-0010
SEATS &
SISSY BARS
DESCRIPTION
License bolts/nuts, white (100-pk.)
License bolts/nuts, black (100-pk.)
SUG. RETAIL
$.35 (ea.)
.35 (ea.)
•Each set includes four bolts,
complete with custom acorn nuts
•Excellent for mounting license plates
onto motorcycles
PART #
DESCRIPTION
DS-190190
License plate set
ELECTRICAL
SUG. RETAIL
$6.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CH4A
DS-270199
DS-270107
DS-270108
LICENSE PLATE BOLTS
DESCRIPTION
Skull
Eagle
Joker
Devil
CH4G
LICENSE PLATE
REFLECTORS
SUG. RETAIL
$46.95
46.95
46.95
46.95
2401-0084
PART #
DESCRIPTION
SUG. RETAIL
CH150A
Amber, (150-pk.) $.50 (ea.)
CH150B
Blue, (150-pk.)
.50 (ea.)
CH150R
Red, (150-pk.)
.50 (ea.)
DS-272080 Amber, (40-pk.)
.50 (ea.)
DS-272081 Red, (40-pk.)
.50 (ea.)
CH4R
PART #
DESCRIPTION
DS-272082 Blue, (40-pk.)
CH4A
Amber, (4-pk.)
CH4B
Blue, (4-pk.)
CH4G
Green, (4-pk.)
CH4R
Red, (4-pk.)
SUG. RETAIL
$.50 (ea.)
2.95 (ea.)
2.95 (ea.)
2.95 (ea.)
2.95 (ea.)
LICENSE PLATE BOLTS
PART #
1905-0121
1905-0122
1905-0144
DESCRIPTION
U.S.A. flag
Skull
8-ball
SUG. RETAIL
$10.95
10.95
10.95
PART #
1905-0146
2030-0021
2030-0022
TANKS &
OIL FILTERS
DASHES
& GAUGES
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
MOTOBOLTS
•Precision manufactured from
the finest-quality materials,
including billet aircraft alloy
aluminum – anodized to preserve finish
•Feature highly detailed full-color logos that are
fade-proof, waterproof and protected by a clear
1905-0121
polycarbonate coating as used in jet fighter canopies
7
3
• /16" head, /4" thread reach, sold in pairs with nuts
and washers included
CABLES
BRAKES
•Plastic reflectors commonly
used on license plate frames
•Available in 4 pk., small tub of 40
and large tub of 150
•Die-cast construction with
chrome finish
•Bolts are 1/4"-20 x 3/4"
•Sold in 4-pks.
PART #
DS-270199
DS-270107
DS-270108
2401-0084
CH4B
1905-0121
2030-0021
1905-0122
2030-0022
DESCRIPTION
SUG. RETAIL
Confederate flag
$10.95
Flames
10.95
Surfer cross
10.95
PART #
2030-0103
2030-0104
1905-0144
2030-0103
DESCRIPTION
Iron cross
Biohazard
1905-0146
2030-0104
SUG. RETAIL
$10.95
10.95
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1069
SECTION
18
WINDSHIELDS
TOURING
LUGGAGE
DS-280202
DS-280201
AIR SCOOP
SEATS &
SISSY BARS
EXHAUST
FUEL/AIR
SYSTEMS
•Handcrafted fiberglass with
large oval intake opening
•Does not hamper airflow to voltage regulator or oil cooler
•E-Z mount for Softail models makes mounting clean
and simple (must be purchased separately)
DS-280204
PART #
AIR SCOOPS
DS-280201
DS-280202
E-Z MOUNT
DS-280204
DESCRIPTION
SUG. RETAIL
For 91-98 Dyna models
For 84-99 FXST/FLST models
$141.95
141.95
For 84-99 FXST/FLST models
49.95
TOOLBOX MOUNTING KITS
•Chrome toolbox mounts feature a spacer and longer
bolt for spacing the footpeg away from the toolbox
•For the right or left sides; toolboxes must
be purchased separately
PART #
FOR 84-99 FXST/FLST
DS-273663
DS-273664
DESCRIPTION
SUG. RETAIL
Left side
Right side
$34.95
34.95
ENGINE
TRANSMISSION
& DRIVELINE
GASKETS
& SEALS
ELECTRICAL
CHROME
TEARDROP
TOOLBOXES
TOOLBOX
MOUNTING BRACKET
•Beautiful reproductions
of the original toolboxes
found on the early models
•Bolt-on bracket mounts toolbox
PART # DS-373655 to left-side
passenger peg block
•Stock peg bracket may be turned
upside down or relocated
to bottom stud
PART #
DS-273666
PART #
DS-373655
DESCRIPTION
For 77-86 FX, FXWG (except FXST)
SUG. RETAIL
$34.95
DS-373701
DESCRIPTION
Right chrome teardrop toolbox;
repl. OEM #64205-40
Left chrome teardrop toolbox;
repl. OEM #64206-89
SUG. RETAIL
$65.95
65.95
LIGHTING
HANDLEBARS,
CONTROLS
& MIRRORS
CABLES
TEARDROP
TOOLBOX POUCHES
BRAKES
•Put an end to tools banging
around in your teardrop toolbox
•Made from black 1,000-denier
Cordura® with a polyurethane
coating that offers excellent
water resistance
•Zippers are non-rusting and edges are bound to help retain their shape
TANKS &
OIL FILTERS
DASHES
& GAUGES
PART #
DS-373692
DS-373693
CHROME STASH TUBES
DESCRIPTION
Teardrop toolbox pouch, right
Teardrop toolbox pouch, left
3550-0082
SUG. RETAIL
$19.95
19.95
3550-0083
•Available in 10" long
or 7" short styles
•Measure 21/4" in diameter
•Open on both ends for easy access
•Clamps included for 1" to 11/4"
DS-373493
and 11/2" frame tubes
•CNC machined from billet
aluminum and chrome plated
•Replacement clamps available separately
PART #
DESCRIPTION
1" TO 11/4" MOUNT
DS-373493 10"
DS-373495 7"
0713-0056 Repl. clamp
SUG.
RETAIL
$187.95
176.95
66.95
DS-373495
Replacement clamp
PART #
DESCRIPTION
11/2" MOUNT
3550-0019 10"
3550-0020 7"
0713-0057 Repl. clamp
SUG.
RETAIL
$187.95
176.95
66.95
FRAMES,
SUSPENSION
& FENDERS
FOOTRESTS
& LICENSE
PLATE FRAMES
TIRES,
TUBES &
WHEELS
HARDWARE,
CHEMICALS
& TOOLS
COVERS,
SECURITY
& GENERAL
1070
STORAGE TUBES
•The perfect place to store tools, a T-shirt,
registration papers, glasses or other loose items
while on the ride
•Measure 8" L x 4" diameter
•Install securely on any frame downtube using either 11/8" or 11/4"
diameter clamp
SUG.
PART #
DESCRIPTION RETAIL
W/ 11/8" MOUNTING CLAMP
3550-0080 Smooth
$185.95
3550-0081 Fluted
185.95
SUG.
PART #
DESCRIPTION RETAIL
W/ 11/4" MOUNTING CLAMP
3550-0082 Smooth
$185.95
3550-0083 Fluted
185.95
STASH TRAY
•Provides a great place
for tools, spark plugs,
gloves, etc.
•Durable ABS
plastic construction
•Fits snugly under the seat
between the frame rails on all models with flip-up seat
PART #
DS-373678
DESCRIPTION
For 82-94 FXR
SUG. RETAIL
$43.95

Untitled - Customs

Transcription

Similar documents

5-Star Universal Solo Seats and Pillion Pads Sportster 1200X/C/L/N

Untitled - Customs

Section 7 - PrestonCycle