cabling and installation accessories

Transcription

WHO ARE WE?
Specialist in commodities and equipement for
electricians, Bizline markets its products through
the Rexel group, world leader in the distribution of
electrical supplies.
Bizline has a comprehensive offering with over
2,000 references covering your daily needs: cabling
accessories, hardware, tapes & chemicals, hand tools
& power tools, worksite equipment and personal
protection equipment.
BIZLINE IN
THE WORLD
Today, Bizline is present in more than
1,200 branches in the world, mainly
in Europe (France, Belgium, Germany,
Luxembourg, Switzerland, Sweden, Finland,
Italy, Spain, Portugal), but also in America
(Brazil, Chile, Peru, USA) and Oceania
(Australia and New Zealand).
Find all our products at www.bizline.com
BIZLINE'S COMMITMENTS!
PROVIDE OUR CLIENTS WITH THE
BEST QUALITY & SAFETY POSSIBLE!
Before any products launch, we test it for quality and conformity
in our own COFRAC-approved laboratory.
Being COFRAC-approved means that our laboratory is a lever to increase
the confidence of our customers, thus they can trust the quality of the
products which are tested with standardized and internationally approved
test methods.
CERTIFICATION
No.1-2279 SCOPE
AVAILABLE ON
WWW.COFRAC.FR
« This internal test laboratory ensures all Bizline products comply
with current national and international standards enforced in our
different markets. »
Alain Nouma,
Bizline Technical, Quality and Laboratory Manager
EXAMPLES OF TESTS PERFORMED IN OUR LABORATORY:
Resistance to
corrosion
ROHS compliance
check
Traction test
Cut-off power
and normal operation
OTHER TYPES OF TESTS (NON EXHAUSTIVE):
h Hardness
h Resistance to heat
h Dielectric test
h Isolation resistance
h Falls
h Impact
OUR GUARANTEE
Other than consumables, our products come with a
guarantee that begins from the date of invoicing.
The guarantee time varies according to the product.
This guarantee applies to any manufacturing defect
under normal conditions of use, maintenance and
storage.
h Climatic resistance
h Etc.
Hand tools
LIFE
TIME
Power tools
Standard cable reels
*
GUARANTEE
YEARS
GUARANTEE
YEAR
GUARANTEE
Professional cable reels
YEARS
GUARANTEE
Site lighting
YEARS
GUARANTEE
Spare parts
3 MONTHS
* In our catalogue, hand tools with a lifetime guarantee are
marked with the appropriate logo.
1
TECHNICAL INFORMATION
1
THE MAIN MARKS OF
CONFORMITY
2
The granting and the use of the marks of conformity (NF,
VDE, etc.) is a voluntary approach, but it guarantees to the
consumer that the quality of the product, and in particular
its conformity to standards, is regularly checked by an
independent laboratory and that its production is subject
to a quality assurance procedure.
Mark of conformity
Certiﬁcation bodies
Countries
LCIE
FRANCE
VDE
GERMANY
SEMKO
SWEDEN
IMQ
ITALY
UL
USA
UL
Canadian Standards
Association
3
IP CODES:
INDEX OF PROTECTION
st
ingress of solid
Levels 1 Number
foreign objects
2nd Number
Ingress of water
0
Not protected
Not protected
1
Protected against solid objects
larger than 50 mm
IP 1x
Protected against vertically
falling drops of water
IP x1
2
larger than 12 mm
IP 2x
Protected against falling water at a
maximum angle of 15°
IP x2
3
larger than 2.5 mm
IP 3x
Protected against falling water at a
maximum angle of 60°
IP x3
4
larger than 1 mm
IP 4x
Protected against water splashes
IP x4
5
Protected against dust
IP 5x
Protected against water jets
IP x5
6
Dust-tight
IP 6x
Protected against waves at sea
IP x6
7
Protected against the effects
of temporary immersion
IP x7
8
Protected against the effects
of prolonged immersion
IP x8
CANADA/USA
CANADA
PROTECTION AGAINST
ELECTRIC SHOCKS
4
CODES OF PROTECTION AGAINST
IMPACTS
Codes of protection against impacts
Three classes of insulation are defined:
Class I
Class II
Class III
Functional insulation
with earthing of
accessible metal parts
Functional insulation
completed by additional
or reinforced insulation,
no earthing
Very low voltage supply
Symbol
Symbol
Symbol
IP xx1/AG1
IP xx5/AG2
IP xx7/AG3
IP xx9/AG4
Weight
150 g
500 g
1.5 kg
5 kg
Height of fall
15 cm
40 cm
40 cm
40 cm
Impact energy
(Joules)
0.225 J
2J
6J
20 J
Codes of protection against impacts
III
IK
01
IK
02
IK
03
IK
04
IK
05
IK
06
IK
07
IK
08
IK
09
IK
10
Impact energy
0.15j 0.23j 0.35j 0.5j
(Joules)
0.7j
1j
2j
5j
10j
20j
Find all our products at
www.bizline.com
2
PICTOGRAMS
TIPS
SLOTTED
PHILIPS® (PH)
POZIDRIV® (PZ)
TORX®
RESISTORX®
PZ/SLOTTED
HEX
HOLLOW HEX
BIT HOLDER
CABLES AND WIRES
Al
Cu
RIGID
SEMI-RIGID
SOFT
SUITED FOR ALUMINIUM
AND COPPER
MULTIPLE STRAND
CABLE
MATERIALS
METAL
SOLID MATERIALS
HOLLOW MATERIALS
CONCRETE
REINFORCED
CONCRETE
Cu
STAINLESS
STEEL
INOX
CELLULAR CONCRETE
Al
WOOD
PLASTERBOARD
POLYSTYRENE
STAINLESS STEEL
ALUMINIUM/COPPER
HOLLOW BRICK
SOLID BRICK
STONE
GLASS
GRANIT
MARBLE
STONEWARE
COMPLIANCE WITH REGULATIONS
ALL NORMATIVE AND SAFETY INFORMATION (SDS, TEST REPORTS, ETC.)
IS INDICATED BY THIS PICTOGRAM IN OUR CATALOGUE:
»
3
CONTENTS
6
Fixings for cables
CABLING AND INSTALLATION ACCESSORIES
94
POWER TOOLS AND ACCESSORIES
220
SITE AND WORKSHOP EQUIPMENT
260
PROTECTION, SAFETY AND SIGNS
280
PLUMBING AND SOLAR APPLICATIONS
4
P.25
NNuts
t andd bbolts
P.66
P.71
Stainless steel screws,
nuts and bolts
Insulating tapes
Multi-purpose tapes
Tapes for specific applications
P.96
P.97
P.99
TAPES AND CHEMICALS
186
Connections
Connect
tti sealing
li
P.20
Scr
Screws
rews
HARDWARE
HAND TOOLS
Connectionn systems
P.16
64
114
Fixings
gs ffor
or tubes
and conduits
P.8
Pliers
Screwdrivers
P.116
P.127
Pliers and
screwdrivers sets
P.73
Cable cutters
Cable strippers
Crimping pliers
P.133
P.135
P.140
P.129
Drill/drivers
Screw bits
Rotary hammer
Core drill
Angle grinder
P.188
P.190
P.191
P.192
P.195
Dispenser reels
P.222
Pull-wires
and accessories
Cable rods
and accessories
P.224
P.232
Cable reels
P.237
Multi-way
extension leads
Extension cords
P.243
P.241
Workwear
Feet protection
Head protection
Eyes protection
P.262
P.265
P.267
P.270
Fasteners
Fast
Sealing
Plumbing hand tools
Photovoltaic accessories
P.282
P.288
P.293
P.295
TAPES AND CHEMICALS
CONTENTS
RT2012 flush-mounting boxes
and accessories
BE'BOX and accessories
PProtection
t ti n ffor spotlight
spotlights
P.34
P.36
P.29
Plugs
Supporting
porting systems
P.75
P.82
Lamp sockets and devices to
connect light fixtures
Cable wall plates
Earthing
P.42
P.43
P.37
Industrial cabling
components
P.47
Cable tray fasteners
and fixings
P.90
Chemical fixings
PU and fire- resistant foams
Maintenance aerosols
P.101
P.106
P.110
Wrenches
Cutting, sawing and
filing tools
P.144
Hammer range
Fixing tools
Solder tools
Marking tools
Measuring tools
P.162
P.164
P.165
P.167
P.170
P.153
Electrical
ectrical insp
inspection
and testing devices
Tool storage
Tool sets
P.177
P.183
P.174
Wall chaser
Vacuum cleaner
Jigsaw
Hot air gun
Drill bits
Hole saws
Cutting discs
Blades
P.196
P.197
P.198
P.199
P.200
P.208
P.215
P.217
Plugs
and connectors
Electrical connection
Lighting
P.244
P.246
P.244
High access
i
t
equipment
Fillers, plasters
and accessories
P.249
P.250
Cleaning material
Hygiene
Stowage
P.253
P.255
P.256
Workshop
furniture
P.257
Respiratory protection
Ears protection
Hands protection
Safety kits
Safety signs and lockout/tagout
P.271
P.272
P.273
P.276
P.276
i
Index by reference p.298 to 311
Alphabetical index p.312 to 320
5
CABLING AND
INSTALLATION
ACCESSORIES
6
CABLING AND INSTALLATION
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
FIXINGS FOR CABLES
P.8
FIXINGS FOR TUBES AND CONDUITS
P.16
CONNECTION SYSTEMS
P.20
CONNECTIONS SEALING
P.25
RT2012
(FRENCH THERMAL REGULATION)
FLUSH-MOUNTING BOXES
AND ACCESSORIES
P.29
BE’BOX AND ACCESSORIES
P.34
PROTECTION FOR SPOTLIGHTS
P.36
LAMP SOCKETS AND DEVICES TO
CONNECT LIGHT FIXTURES
P.37
CABLE WALL PLATES
P.42
EARTHING
P.43
INDUSTRIAL CABLING COMPONENTS
P.47
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
AND SOLAR APPLICATIONS
7
FIXINGS FOR CABLES
CABLE TIES AND ACCESSORIES
Different types of polyamide:
There are many sorts of polyamide, the most common being PA 6.6. These materials offer excellent mechanical and chemical
properties, differing according to their type: PA 6.6, PA 11, PA 12, etc. Certain grades of polyamide, such as PA 6.6, are sensitive
to temperature and humidity, they can be loaded or unloaded with water, hence modifying their properties, a phenomenon called
"moisture regain".
TECHNICAL POLYAMIDE INSTALLATION CABLE TIES
These cable ties are designed for indoor and outdoor cable fixing.
Ideal answer to mechanical and environmental constraints in electrical installations, industrial
wiring and outdoor fixings.
Technical polymer for outdoor use.
Raw material flammability: UL 94 - HB.
Humidity absorption: <1 % (23 °C - 50 % R.H.).
Installation temperature: -30 °C to +60 °C.
Operating temperature: -45 °C to +85 °C.
Glow wire resistance 1.5 mm (IEC 60695-2-11): 650 °C.
The raw materials used to produce these cable ties follow the EC Directives: 2002/95/EC
(RoHS).

Easy insertion.
More flexible for easier fitting.
Temporary position for passing cables before final tightening.
Reference
Length (mm)
Width (mm)
Thickness (mm)
Minimum clamping Ø (mm)
Traction strength (N)
Head type
BIZ 111 809
180
9
1.9
10
390
Single saddle
Quantity per box
100
BIZ 112 609
260
9
1.9
26
540
Double saddle
100
BIZ 113 609
360
9
1.9
26
540
Double saddle
100
BIZ 115 109
510
9
2.2
70
540
Double saddle
100
BIZ 117 609
760
9
2.35
70
540
Double saddle
100
Quantity per bag
PA 6.6 INSTALLATION CABLE TIES
These cable ties are designed for indoor and outdoor cable fixing.
Material: polyamide 6.6.
Raw material flammability: UL 94 V2.
Humidity absorption: 2.5 % (50 % R.H.).

Resistance to chemicals: insensitive to motor oil, grease, petroleum products.
Halogen free.
Reference
8
Length (mm)
Width (mm)
Thickness (mm)
Minimum clamping Ø (mm)
Head type
BIZ 669 180
180
9
2.05
15
360
Single saddle
100
BIZ 669 260
260
9
2.05
25
550
Double saddle
100
BIZ 669 360
360
9
2.05
25
550
Double saddle
100
BIZ 669 510
510
9
2.05
75
550
Double saddle
100
BIZ 669 760
760
9
2.05
75
550
Double saddle
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
FIXINGS FOR CABLES
PA 6.6 CABLE TIES
Polyamide 6.6 is a semi-crystalline industrial thermoplastic with high mechanical strength.

High abrasion resistance.
Excellent resistance to low temperatures and temperature changes.
Halogen free.
Reference
Colour
Length (mm)
Width (mm)
Maximum clamping Ø (mm)
Thickness (mm)
Quantity per bag
BIZ 300 001
Black
100
2.5
22
80
1.12
100
BIZ 300 003
Black
142
2.5
35
180
1.22
100
BIZ 300 005
Black
142
3.2
34
180
1.17
100
BIZ 300 007
Black
203
2.5
55
80
1.22
100
BIZ 300 009
Black
203
3.6
52
180
1.17
100
BIZ 300 011
Black
190
4.8
49
220
1.24
100
BIZ 300 013
Black
292
3.6
82
180
1.17
100
BIZ 300 015
Black
300
4.8
83
220
1.24
100
BIZ 300 017
Black
368
4.8
105
220
1.24
100
BIZ 300 023
Black
380
7.6
105
550
1.91
100
BIZ 300 025
Black
203
7.6
52
550
1.91
100
BIZ 300 027
Black
762
9
227
800
1.8
100
BIZ 340 111
Black
190
4.8
49
220
1.24
1000
BIZ 340 113
Black
292
3.6
82
180
1.17
1000
BIZ 340 115
Black
300
4.8
83
220
1.24
1000
BIZ 340 117
Black
368
4.8
105
220
1.24
1000
BIZ 300 002
Transparent
100
2.5
22
80
1.12
100
BIZ 300 004
Transparent
142
2.5
35
180
1.22
100
BIZ 300 006
Transparent
142
3.2
34
180
1.17
100
BIZ 300 008
Transparent
203
2.5
55
80
1.22
100
BIZ 300 010
Transparent
203
3.6
52
180
1.17
100
BIZ 300 012
Transparent
190
4.8
49
220
1.24
100
BIZ 300 014
Transparent
292
3.6
82
180
1.17
100
BIZ 300 016
Transparent
300
4.8
83
220
1.24
100
BIZ 300 018
Transparent
368
4.8
105
220
1.24
100
BIZ 300 024
Transparent
380
7.6
105
550
1.91
100
BIZ 300 026
Transparent
203
7.6
52
550
1.91
100
BIZ 300 028
Transparent
762
9
227
800
1.8
100
ANTI-UV PA 6.6 CABLE TIES

Anti-UV treatment.
Halogen free.
Reference
Colour
Length (mm)
Width (mm)
Thickness (mm)
Quantity per bag
BIZ 340 001
Black
100
2.5
22
80
1.12
100
BIZ 340 003
Black
142
2.5
35
80
1.22
100
BIZ 340 005
Black
142
3.2
34
180
1.17
100
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
For outdoor use, photovoltaic installations, etc.
Material: polyamide 6.6 with adjuvant guaranteeing resistance to UV radiation.
9
FIXINGS FOR CABLES
Reference
Colour
Length (mm)
Width (mm)
Thickness (mm)
Quantity per bag
BIZ 340 007
Black
203
2.5
55
80
1.22
100
BIZ 340 009
Black
203
3.6
52
180
1.17
100
BIZ 340 011
Black
190
4.8
49
220
1.24
100
BIZ 340 013
Black
292
3.6
82
180
1.17
100
BIZ 340 015
Black
300
4.8
83
220
1.24
100
BIZ 340 017
Black
368
4.8
105
220
1.24
100
BIZ 340 023
Black
380
7.6
105
550
1.91
100
BIZ 340 025
Black
203
7.6
52
550
1.91
100
BIZ 340 027
Black
762
9
227
800
1.8
100
SELF-GRIPPING CABLE TIES
For fixing and organizing data cables (UTP, STP, Fibre, etc.).
Designed to clamp cables without impacting the data transmission rate likely to occur with
typical cable ties.

Easy ﬁtting.
Reusable.
Reference
Type
Length (mm)
Length (m)
Width (mm)
Quantity per bag
BIZ 300 110
Cable ties
210
-
16
20
BIZ 300 111
Roll
-
10
20
1
STAINLESS STEEL CABLE TIES
Recommended for use in corrosive environments (food, chemical and dairy industry, hospitals,
etc.).
In AISI 304 stainless steel to EN 10088 No. 1-4301.
Salt spray resistance: no red rust after 48 hr.
Thickness: 0.265 mm.
Hardness: 310 Hv (approx. HRC 30) minimum.
Halogen free.

May be tightened by hand.
Ball locking system.
Reference
10
Length (mm)
Width (mm)
Quantity per bag
BIZ 300 100
201
4.6
51
460
100
BIZ 300 101
360
4.6
102
460
100
BIZ 300 102
360
7.9
102
1140
50
BIZ 300 103
520
7.9
152
1140
50
BIZ 300 104
838
7.9
254
1140
50
BIZ 300 105
1016
7.9
305
1140
50
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
FIXINGS FOR CABLES
ADHESIVE AND SCREW-ON MOUNTING BASES
Used with cable ties for the quick fixing of electrical cables.
Operating temperature: -40 °C to +86 °C for the base.
Adhesive operating temperature: -10 °C to +80 °C.
Reference
Colour
Length (mm)
Width (mm)
Tear resistance (N)
Quantity per box
BIZ 300 019
Transparent
28
28
160
100
BIZ 300 020
Uv black
28
28
160
100
BIZ 300 021
Transparent
19
19
100
100
BIZ 300 022
Uv black
19
19
100
100
CABLE TIES MOUNTING BASES
For the quick fixing of cables, tubes and conduits using cable ties up to 9 mm wide.
Colour: black.
Reference
Screw Ø (mm)
Width (mm)
Height (mm)
Quantity per box
5
14
18
100
BIZ 710 251
WALL PLUG MOUNTING BASES
Reference
Type
Drilling Ø (mm)
Length (mm)
Width (mm)
Height (mm)
BIZ 710 250
Standard
8
37
9.2
6.5
100
BIZ 710 252
Wall stand-off
8
37
9.2
13
100
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
Quantity per box
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
For the quick fixing of cables, tubes and conduits using cable ties up to 9 mm wide.
Colour: black.
11
FIXINGS FOR CABLES
CABLE CLIPS
NAIL CABLE CLIPS AP SERIES
•
•
•
•
Rigid fixing for cables and conduits between 5 mm and 25 mm Ø.
Flexible fixings for cables and conduits between 8 mm and 20 mm Ø.
For solid materials (solid concrete, solid masonry) and wood.
Can be suitable for hollow materials (hollow brick and block) depending on the thickness.
Material: high density polyethylene (PEHD).
Colour: grey RAL 7035.
Nail in bright zinc hardened steel, treated against rust.
Cable Ø marked on each clip.
Reference
Cable Ø (mm)
Nail Ø (mm)
Nail length (mm)
Quantity per pot
BIZ 310 105
5
2.5
18
200
BIZ 310 106
6
2.5
25
100
BIZ 310 107
7
2.5
25
100
BIZ 310 108
8
2.5
30
100
BIZ 310 109
9
2.5
30
100
BIZ 310 110
10
2.5
30
100
BIZ 310 112
12
2.5
30
100
BIZ 310 114
14
3
35
100
BIZ 310 116
16
3.2
38
100
BIZ 310 119
20
3.2
38
50
BIZ 310 125
25
3.2
47
50
BIZ 310 150
Multi-diameter 8/10
2
25
100
BIZ 310 151
11/15
2
35
100
BIZ 310 152
Multi-diameter 16/20
2
40
100
NAIL CABLE CLIPS BC SERIES
Nail cable clips for installations of round cables.
Available in several sizes and different colours. Indoor and outdoor installation.
Corrosion class: C4.
Nail material: electroplated steel, hardened steel. Acid-resistant.
Clip material: PeHD, impact resistant.
Halogen free.
UV stabilized.

Nail bends before breaking.
Flexible design: one type can ﬁt several cable sizes.
Colour code on the pack for an easier identiﬁcation of the size.
Reference
12
Type
Colour
Cable Ø (mm)
Nail length (mm)
Nail useful length (mm)
Nail Ø (mm)
Quantity per bag
BIZ 310 025
BC C4-3-5
White
3-5
20
15
1.2
100
BIZ 310 026
BC C4-4-6
White
4-6
20
14
1.2
100
BIZ 310 027
BC C4-5-7
White
5-7
20
12
1.2
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
FIXINGS FOR CABLES
CABLE CLIPS
Reference
Type
Colour
Cable Ø (mm)
Nail length (mm)
Nail useful length (mm)
Nail Ø (mm)
Quantity per bag
BIZ 310 028
BC C4-7-10
White
7-10
25
15
1.5
100
BIZ 310 029
BC C4-7-10
White
7-10
30
21
1.5
100
BIZ 310 030
BC C4-8-12
White
8-12
30
18
2
100
BIZ 310 031
BC C4-8-12
White
8-12
35
23
2
100
BIZ 310 032
BC C4-8-12
White
8-12
45
33
2
100
BIZ 310 033
BC C4-10-14
White
10-14
30
18
2
100
BIZ 310 034
BC C4-10-14
White
10-14
35
22
2
100
BIZ 310 035
BC C4-10-14
White
10-14
45
33
2
100
BIZ 310 036
BC C4-14-20
White
14-20
35
18
2.2
100
BIZ 310 037
BC C4-14-20
White
14-20
45
26
2.2
100
BIZ 310 038
BC C4-18-22
White
18-22
45
23
2.2
50
BIZ 310 039
BC C4-22-26
White
22-26
45
19
2.2
50
BIZ 310 040
BC C4-7-10
Black
7-10
30
20
1.5
100
BIZ 310 041
BC C4-10-14
Black
10-14
35
23
2
100
BIZ 310 042
BC C4-14-20
Black
14-20
35
18
2
100
BIZ 310 043
BC C4-14-20
Black
14-20
45
28
2
100
BIZ 310 044
BC C4-18-22
Black
18-22
45
23
2.2
50
BIZ 310 045
BC C4-22-26
Black
22-26
45
19
2.2
50
BIZ 310 046
BC C4-3-5
Natural
3-5
16
11
1.2
100
BIZ 310 047
BC C4-3-5
Natural
3-5
20
15
1.2
100
BIZ 310 048
BC C4-4-6
Natural
4-6
20
14
1.2
100
BIZ 310 049
BC C4-5-7
Natural
5-7
20
12
1.2
100
Screw Ø (mm)
Quantity per bag
5
100
SCREW CABLE CLIPS
Screw cable clips for installations of round cables.
Avaiable in several sizes and different colours.
Indoor and outdoor installation.
Screw material: electroplated steel, hardened steel. Acid-resistant.
Cross slotted head type PH2.
Halogen free.
UV stabilized.
Reference
BIZ 310 050
Type
Colour
Cable Ø (mm)
Screw length (mm)
BCS C4-7-10
White
7-10
40
Screw useful length
(mm)
30.5
BIZ 310 051
BCS C4-8-12
White
8-12
40
30
5
100
BIZ 310 052
BCS C4-10-14
White
10-14
40
27.5
5
100
BIZ 310 053
BCS C4-14-18
White
14-18
40
24
5
100
BIZ 310 054
BCS C4-18-22
White
18-22
40
21
5
50
BIZ 310 055
BCS C4-22-26
White
22-26
40
14.5
5
50
BIZ 310 056
BCS C4-8-12
Black
8-12
40
30
5
100
BIZ 310 057
BCS C4-10-14
Black
10-14
40
27.5
5
100
BIZ 310 058
BCS C4-14-18
Black
14-18
40
24
5
100
BIZ 310 059
BCS C4-18-22
Black
18-22
40
21
5
50
BIZ 310 060
BCS C4-22-26
Black
22-26
40
14.5
5
50
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

13
FIXINGS FOR CABLES
CABLE CLAMPS
METAL CLAMPS
Standard metal clamps for installation of round cables in wood and wood-based materials.
Available with one or two notched nails in different lengths and for several sizes of cables.
Material: galvanized steel, white painting.
Colour: white.

Notched nails for a better tensile strength.
Painting adapted to the colour of cable.
Reference
Type
Cable Ø (mm)
Nail length (mm)
Nail
BIZ 310 085
BV 8R16
8
16
One
Quantity per bag
200
BIZ 310 086
BV 10R16
10
16
One
200
BIZ 310 087
BV 8R25
8
25
One
200
BIZ 310 088
BV 10R25
10
25
One
200
BIZ 310 089
BV 8R12
8
12
One
200
BIZ 310 095
BVD 8R16
8
16
Two
100
BIZ 310 096
BVD 10R16
10
16
Two
50
BIZ 310 097
BVD 12R16
12
16
Two
50
BKK METAL CLAMPS
Metal clamps for installations of round cables.
Available with or without screw in different lengths and for several sizes of cables.
Material: galvanized steel, powder-coated.
Colour: white.

Powder-coated in the colour of the cable.
Delivered with adapted mounting tool.
Reference
14
Type
Cable Ø (mm)
Nail length (mm)
Nail Ø (mm)
Screw
Quantity per bag
BIZ 310 070
BKK 7-10
7-10
18
2
No
100
BIZ 310 071
BKK 7-10
7-10
25
2
No
100
BIZ 310 072
BKK 7-10
7-10
40
2
No
100
BIZ 310 073
BKK 8-12
8-12
18
2
No
100
BIZ 310 074
BKK 8-12
8-12
25
2
No
100
BIZ 310 075
BKK 8-12
8-12
40
2
No
100
BIZ 310 076
BKK 10-14
10-14
25
2
No
100
BIZ 310 077
BKK 10-14
10-14
40
2
No
50
BIZ 310 078
BKK 10-14
14-20
25
2
No
50
BIZ 310 079
BKK 10-14
14-20
40
2
No
50
BIZ 310 080
BKK S 7-10
7-10
25
2.9
Yes
100
BIZ 310 081
BKK S 8-12
8-12
25
2.9
Yes
100
BIZ 310 082
BKK S 10-14
10-14
25
2.9
Yes
100
BIZ 310 083
BKK S 14-20
14-20
25
2.9
Yes
50
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
FIXINGS FOR CABLES
CABLE CLAMPS
BKK METAL CLAMPS
ACCESSORY
MOUNTING TOOL FOR BKK METAL CLAMPS
Mounting tool for installation of BKK and BKK S metal clamps.
Colour: black.
Reference
Size
BIZ 310 100
7-10
BIZ 310 101
8-12
BIZ 310 102
10-14
BIZ 310 103
14-20
PLASTIC CLAMPS
Plastic clamps for round cables/conduits.
Available for several sizes of cables.
Material: PeHD, impact resistant.
Halogen free.
UV stabilized.
Colour: white.

Cable Ø marked on each clamp.
Reference
Type
Cable Ø (mm)
Screw Ø (mm)
BIZ 310 064
BK 5-7
5-7
5
Quantity per bag
100
BIZ 310 065
BK 7-10
7-10
5
100
BIZ 310 066
BK 10-14
10-14
5
100
BIZ 310 067
BK 14-20
14-20
6
100
BIZ 310 068
BK 20-26
20-26
6
50
DOWEL CLAMPS
For fitting telecoms and TV cables to blockwork, concrete, brick, etc.
Temperature range:
• +80 °C continuous/+130 °C peak.
• -10 °C fitting/-40 °C use.
Reference
Cable Ø (mm)
Use
Quantity per box
BIZ 310 200
3-13
For cables 1 x 3G2.5 maximum
100
BIZ 310 201
13-28
For cables and IRO plastic tubing 16/20/25
50
BIZ 310 202
28-40
For cables and IRO tubing 32/40
25
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Resistance to tear-out: 100 N measured in B25 concrete.
Halogen and silicon free.
15
FIXINGS FOR CABLES
CABLE CLAMPS
CABLE CLEATS
Cleats supplied with 6 x 55 mm plug fitted.
Holds and manages cables.
Flame resistance: VDE 0471/DIN IEC 695.
Glow wire test: 960 °C.
UV resistance: 5 years in a warm/dry or warm/damp climate without change of properties for
use.

Quick and economical cable ﬁxing system.
Reference
Capacity in number of cables (3 x 1.5 mm² cables)
Quantity
BIZ 710 237
8
200
BIZ 710 238
16
100
2-POSITIONS CABLE GUIDES
Cable guides supplied with 6 x 55 mm plug fitted.
Flame resistance: VDE 0471/DIN IEC 695.
Operating temperature: 80 °C continuous, 130 °C peak, 10 °C when fitting, 40 °C in use.
UV resistance: 5 years in a warm/dry or warm/damp climate without change of properties for
use.

Wall or ceiling ﬁxing.
The best alternative to installing cable trays, tie mounts, etc.
Reference
Capacity in number of cables (3 x 1.5 mm² cables)
Quantity
BIZ 710 235
15
100
BIZ 710 236
30
50
PLUG CLIPS
Plug clips for installations of round cables.
Available in simple and double conduit capacity.
Indoor and outdoor installation.
Nail material: electroplated steel, hardened steel. Acid-resistant.
Halogen free.
UV stabilized.
Operating temperature: -40 °C to + 80 °C.
Colour: natural.

Type
Cable Ø (mm)
BIZ 310 061
BPCN 16-19
16-19
Number of pipes/
conduits capacity
One
BIZ 310 062
BPCN 19-22
19-22
BIZ 310 063
BDPCN 16-19
16-19
Reference
16
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Plug length (mm)
Plug Ø (mm)
Nail length (mm)
Nail Ø (mm)
Quantity per bag
23
5.5
40
2.5
100
One
23
5.5
40
2.5
100
Two
23
5.5
40
2.5
100
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TUBE FIXING MOUNTING BASES
For the quick, secure, indoor fixing of IRL plastic tubing.
Resistance to pull-out: 360 N (average value).
Plug: drilling Ø: 8 mm.

Saves time: the threaded plug is supplied in the same box as the tube ﬁxing tie base for the
BIZ 710 245 and BIZ 710 246 references.
Extremely easy to install: excellent control and tightening of the cable tie. The screw head
does not impede the passage of the cable tie.
The tie base takes 5.5 mm Ø screws.
The M7 threaded plug can be used as a central behind ﬁxing of a junction box.
Reference
Tube Ø (mm)
Drilling Ø (mm)
Threaded plug
Quantity per box
BIZ 710 245
16-32
8
M7
100 tube fixing bases + 100 plugs
BIZ 710 246
40-63
8
M7
100 tube fixing bases + 100 plugs
BIZ 710 247
-
8
M7
100 plugs
BIZ 710 248
16-32
-
-
100 tube fixing bases
BIZ 710 249
40-63
-
-
100 tube fixing bases
"CLIPEO" PLUG CLAMPS
For fixing multi-layer pipes.
Polyamide 6.

Requires no special ﬁtting tool or drilling.
Reference
Drilling Ø (mm)
Tube Ø (mm)
Quantity per box
BIZ 710 240
8
16
100
BIZ 710 241
8
20
100
BIZ 710 242
8
25
100
PLASTIC BIZCLIPS
Reference
Type
Drilling Ø (mm)
Tube and conduits Ø (mm)
Quantity per box
BIZ 710 225
Single saddle
8
16
100
BIZ 710 226
Single saddle
8
20
100
BIZ 710 227
Single saddle
8
25
100
BIZ 710 332
Single saddle
8
32
50
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
For fixing pipes.
Polyamide 6.
Colour: grey.
17
PLASTIC BIZCLIPS
Reference
Type
Drilling Ø (mm)
Quantity per box
BIZ 710 330
Double saddle
8
16
100
BIZ 710 228
Double saddle
8
20
100
BIZ 710 229
Double saddle
8
25
50
ACCESSORY
BAGCLIP PLUGS
For easy installation of "CLIPEO" and "BIZCLIPS" plugs in friable materials
(drywalls, gypsum tiles).
Polyamide 6.
Reference
BIZ 710 239
Drilling Ø (mm)
Quantity per box
12
100
HIGH-STRENGTH PERFORATED METAL CLAMPS
Fixing electrical cables and ICTA conduits.
Material: zinc-plated steel.
Reference
Tube Ø (mm)
Quantity per box
BIZ 710 290
16
100
BIZ 710 291
20
100
BIZ 710 292
25
50
HIGH-STRENGTH METAL CLAMPS
Fixing electrical cables and ICTA conduits.
Reference
18
Tube Ø (mm)
Quantity
BIZ 310 300
16
100
BIZ 310 301
20
100
BIZ 310 302
25
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
ELECTROPLATED METAL CLAMPS
Electroplated metal clamps with two nails for installations of round cables and conduits in
wood and wood-based materials.
Available in different lengths and for several sizes of cables and conduits.
Material: electroplated steel, hardened steel.
Colour: yellow.

Notched nails for a better tensile strength.
Reference
Type
Cable Ø (mm)
Nail length (mm)
Quantity per bag
BIZ 310 090
BM 16R16
16
16
50
BIZ 310 091
BM 20R20
20
20
50
BIZ 310 093
BM 25R30
25
30
30
BIZ 310 092
BM 27R32
27
32
20
BIZ 310 094
BM 32R35
32
35
20
STEEL EDGE CLIPS
For fixing electrical tubes or cables by clamping the H or I beam in metallic framework.
Material: crIll passivated zinc-plated steel.
Operating temperatures: 150 °C max.
Resistance to salt mist before red rust: 400 hours.
Reference
Thickness of metal sheet (mm)
Cable Ø (mm)
Quantity per box
BIZ 710 260
2/7
6/9
100
BIZ 710 261
2/7
10/14
100
BIZ 710 262
2/7
15/21
100
BIZ 710 263
2/7
22/32
100
BIZ 710 264
8/12
6/9
100
BIZ 710 265
8/12
10/14
100
BIZ 710 266
8/12
15/21
100
BIZ 710 267
8/12
22/32
100
CONNECTING SLEEVES
Reference
Quantity per box
BIZ 710 230
16
50
BIZ 710 231
20
50
BIZ 710 232
25
40
BIZ 710 234
32
20
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Allow conduits and tubing to be joined together (conduits /conduits or conduits/tube).
For ICTA conduits.
Material: polypropylene.
19
CONDUIT CLIPS
“Omega” shape to fit in slots.
For electrical slots and grooves.
For fitting 16-20 mm sheaths and tubes.
Colour: grey to DIN specifications.
Reference
Quantity per bucket
BIZ 710 233
100
CONNECTION SYSTEMS
TERMINAL BLOCKS
12-way polypropylene terminal blocks.
Supplied with screws engaged at 1/3.

»
Ultra-ﬂexible blocks.
Can be separated in 1.5 turns without the use of tools.
EN 60998, NF EN 60695-2, CEI 60664-1
Reference
Section (mm²)
Length (mm)
Height (mm)
Depth (mm)
Voltage (V)
Current (A)
Colour
BIZ 320 001
2.5
93
13
16
400
24
Black
Quantity
10
BIZ 320 002
6
109
14
17
400
41
Black
10
BIZ 320 003
10
131
16
20
400
57
Black
10
BIZ 320 004
16
153
20
23
400
76
Black
10
BIZ 320 005
25
204
24
32
400
101
Black
10
BIZ 320 006
2.5
93
13
16
400
24
White
10
BIZ 320 007
6
109
14
17
400
41
White
10
BIZ 320 008
10
131
16
20
400
57
White
10
BIZ 320 009
16
153
20
23
400
76
White
10
BIZ 320 010
25
204
24
32
400
101
White
10
RIGID PP TERMINAL BLOCKS
Black 12-way polypropylene terminal blocks with brass terminal.
Supplied with unscrewed captive screws for easy wire insertion.

Can be separated without the use of tools.
Reference
20
Section (mm²)
Length (mm)
Height (mm)
Depth (mm)
Voltage (V)
Current (A)
BIZ 320 101
2.5-4
93.9
13.4
17
450
24
10
BIZ 320 102
6
116.5
14.7
20
450
41
10
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Quantity
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CONNECTION SYSTEMS
Reference
Section (mm²)
Length (mm)
Height (mm)
Depth (mm)
Voltage (V)
Current (A)
BIZ 320 103
10
142.8
17.4
23
450
57
Quantity
10
BIZ 320 104
16
161.9
21.5
28.5
450
76
10
BIZ 320 105
25-35
177.2
27.5
31
450
125
10
BIZ 320 106
2.5-4
93.9
13.4
17
450
24
10
BIZ 320 107
6
116.5
14.7
20
450
41
10
BIZ 320 108
10
142.8
17.4
23
450
57
10
BIZ 320 109
16
161.9
21.5
28.5
450
76
10
BIZ 320 110
25-35
177.2
27.5
31
450
125
10
TRANSPARENT TERMINAL BLOCKS
Blocks of 10 polycarbonate terminals (5 terminals for BIZ 320 020).

Excellent visibility of connections directly by transparency.
Can be separated without the use of tools.
Maximum safety with a single input per block.
Reference
Section (mm²)
Length (mm)
Height (mm)
Depth (mm)
Voltage (V)
Number of holes
Quantity
BIZ 320 015
1.5
90
15.5
16.5
450
10
10
BIZ 320 016
2.5
110
18.5
20
450
10
10
BIZ 320 017
4
116
19.7
22.2
450
10
10
BIZ 320 018
6
137
22
24.5
450
10
10
BIZ 320 019
10
157
25
29
500
10
10
BIZ 320 020
16
100
31
34.7
500
5
10
TRANSPARENT SCREW CONNECTORS
Transparent single connectors.
Excellent visibility of connections directly by transparency.
Maximum safety with a single input per block.
Reference
Section (mm²)
Length (mm)
Height (mm)
Depth (mm)
Voltage (V)
BIZ 320 021
2 x 16
21
25
25
450
BIZ 320 022
2 x 25
26
29
29
450
BIZ 320 023
2 x 35
32
31
33
500
BIZ 320 024
2 x 2.5
9.7
18.5
20
450
BIZ 320 025
2x4
10.4
19.7
22.2
450
BIZ 320 026
2x6
12.5
22
24.5
450
BIZ 320 027
2 x 10
14.6
25
29
500
BIZ 320 028
2 x 16
20
31
34.7
500
BIZ 320 029
2 x 25
22
40
38.5
500
BIZ 320 030
2 x 35
24.5
42.8
45.5
500
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

21
CONNECTION SYSTEMS
POLYAMIDE TERMINAL BLOCKS
Material: polyamide.

Self-extinguishing.
Halogen free.
Reference
A (mm)
L (mm)
Section (mm²)
Quantity
BIZ 000 980
28.5
164
6
10
BIZ 000 982
28.5
24
10
10
BIZ 000 984
28.5
27.2
16
10
BIZ 000 986
28.5
29.3
25
10
BIZ 000 988
28.5
34.2
35
10
Quantity per carton box
CHRISTA'L PUSH-IN WIRE CONNECTORS
Self-extinguishing V0 approved automatic connection terminals.
Glow wire test: 960 °C < 5 s (NF EN 60 998-2-2).
For solid wires from 1 to 2.5 mm².
Material: polycarbonate body and polyamide 6.6 colour-coded parts.
Voltage: 450 V.
Intensity: 24 A.
Technical documentation available on our web site: Test report.

Test point for quick checking of the connection.
Reference
Number of inputs
Colour
Quantity per pot
BIZ 300 422
2
Red
100
-
BIZ 300 433
3
Orange
100
-
BIZ 300 444
4
Yellow
100
-
BIZ 300 455
5
Grey
50
-
BIZ 300 488
8 (2 x 4)
Black
50
-
BIZ 300 499
-
100 mixed connectors
-
BIZ 720 422
2
Red
-
1000
BIZ 720 433
3
Orange
-
1000
BIZ 720 444
4
Yellow
-
1000
BIZ 720 455
5
Grey
-
1000
BIZ 720 488
8 (2 x 4)
Black
-
1000
OPAQUE PUSH-IN WIRE CONNECTORS
Automatic connection terminals.
For solid wires from 1 to 2.5 mm².
Material: UL 94 V2 thermoplastic.
Voltage: 450 V.
Intensity: 24 A.
Reference
22
Number of inputs
Colour
Quantity per pot
BIZ 300 306
2
Red
100
-
BIZ 300 307
3
Orange
100
-
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CONNECTION SYSTEMS
Reference
Number of inputs
Colour
Quantity per pot
BIZ 300 308
4
Yellow
100
-
BIZ 300 309
5
Grey
50
-
BIZ 300 310
8 (2 x 4)
Black
50
-
BIZ 720 306
2
Red
-
1000
BIZ 720 307
3
Orange
-
1000
BIZ 720 308
4
Yellow
-
1000
BIZ 720 309
5
Grey
-
500
BIZ 720 310
8 (2 x 4)
Black
-
500
CHRISTA'L PUSH-IN WIRE CONNECTORS CASE
Contains:
•
•
•
•
•
•
•
•
•
1 case with 4 storage trays.
100 Christa'l 2 input connectors.
1000 4 x 30 mm Pozidriv chipwood screws.
1000 4 x 35 mm Pozidriv chipwood screws.
250 6 x 30 mm Alfa plugs for solid materials.
Reference
BIZ 790 508
CHRISTA'L FLEX PUSH-IN WIRE CONNECTORS
Glow wire test: 960 °C < 5 s (NF EN 60 998-2-2).
For solid wires from 0.5 to 2.5 mm². For semi-solid wires from 0.5 to 2.5 mm².
Voltage: 450 V.
Intensity: 24 A.
Two independent contact blades: for connecting wires with different cross-sections and nature,
increased tearing resistance.
Test point for quick connection check.
Visual connection inspection.
Number of inputs marked with colour code.
Reference
Number of inputs
Colour
Quantity per pot
BIZ 300 402
2
Yellow
100
BIZ 300 403
3
Orange
100
BIZ 300 404
4
Transparent
75
BIZ 300 405
5
Blue
50
BIZ 300 406
6
Purple
50
BIZ 300 408
8
Blue
40
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

23
CONNECTION SYSTEMS
XPRESS CONNECTORS
Enable the quick connection of two conductors.
Material: polyamide body self-extinguishing glass fibre V0.
Contact resistance less than 1 mΩ.
Maximum contact resistance variation less to 0.30 mΩ.
Isolation resistance (standard NFC 93050-1) immersed (20 days) greater than 1011 Ω.
Dielectric rigidity (50 Hz) greater than 2000 V.

Self-stripping.
Self-extinguishing V0.
Reference
BIZ 300 311
Current (A)
Dimensions (mm)
Quantity
30
17 x 18 x 28
50
3 POLES LEVER PUSH-IN WIRE CONNECTORS FOR RIGID AND FLEXIBLE WIRE
Flexible wire cross-section: 0.75 to 2.5 mm².
Rigid wire cross-section: 0.75 to 2.5 mm².
Material: polyamide 6.6 terminal 25 % GF V0.
Copper connection system.
Voltage: 400 V.
Intensity: 24 A.
Strip off 16 mm.

Connectors compatible with ﬂexible/rigid wires.
Direct insertion of stripped rigid wires: gain of time.
Reference
BIZ 300 503
Number of inputs
Quantity per pot
3
50
SOLID/STRANDED WIRE CONNECTORS
Connection of radiators, light fittings, etc.
Voltage: 400 V.
Intensity: 24 A.

Direct connection without tools.
Reference
24
Wire type
Stranded wires (mm²)
Solid wires (mm²)
Colour
Quantity per box
BIZ 300 490
1 stranded/1 solid wire
0.5/1.5
0.75/2.5
Grey
100
BIZ 300 491
1 stranded/2 solid wires
0.5/1.5
0.75/2.5
White
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CONNECTION SYSTEMS
LOW CURRENT CONNECTORS
For single and multi-strand conductors, depending on Ø, between 0.35 and 0.9 mm.
Recommended for all applications and especially digital telecoms.
Approved by the main international telecoms operators.
Positive and continuity high compression technology allows to install our connectors on
alarms and other detection and safety systems.
The BIZ 330 002 connector allows full cable bypass connection (use on LED) with single
and multi-strand conductor supply lines.
Pre-greased version, waterproof (except BIZ 330 002).
Contact resistance less than 0.30 mΩ.
Lightning resistance: 15,000 A.
Electrical rigidity greater than 3000 V.

Use on LED and alarms.
High compression technology ensuring true axial stripping of the wires.
Reliability 10-60 times greater than “U shape” technology.
Number of inputs
Type
Green
2
Extension
Maximum insulating Ø,
all materials (mm)
1.63
Blue
2 patches
Junction
1.63
100
Red
2/5*
Extension/junction
1.82
100
Reference
Colour
BIZ 330 001
BIZ 330 002
BIZ 330 003
Quantity per box
100
* (2/3 : 0.35 to 0.90 mm Ø ; 5: 0.40 mm Ø).
ACCESSORY
CRIMPING TOOL FOR LOW CURRENT CONNECTORS
Ensures the cutting of copper conductors diameter from 0.1 to 0.9 mm.
Comfortable plastic-shrouded handles.

Lightweight tool for repetitive use.
Reference
BIZ 330 004
CONNECTIONS SEALING
BIZ’GEL SEALING GEL

Two components gel with high dielectric, thermal and sealing characteristics.
In two practical bottles, the required quantity of the two components should be mixed in
the ratio 1:1.
Sealing and insulation of electrical connections.
Ideal for sealing junction boxes outdoors or in damp environments.
Suitable for sealing outdoor automated devices, intercoms, outdoor electrical and
swimming pool installations, etc.
Dielectric strength: > 20 kV/mm.
Volume resistivity: > 2.1015 Ω/cm.
Voltage: from 0.6 to 1 kV.
Installation temperature: +0 °C to +40 °C.
Operating temperature after polymerisation: -40 °C to +200 °C.
Fast reticulation: less than 10 minutes at 23 °C.
Protection index: IP 68.
Technical documentation available on our web site: SDS.
Power may be switched back on in under 10 minutes.
Easily re-accessible.
Non toxic.
No shelf-life.
Polymerisation, even at low temperatures.
Reference
Net volume (l)
BIZ 710 295
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
1
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
25
CONNECTIONS SEALING
BIZ’GEL SEALING GEL, POUCH
Two components gel with high dielectric, thermal and sealing characteristics.
Sealed pouches with preset dosage of the bi-component sealing gel.
Ideal for sealing junction boxes installed outdoors or in humid environment, with its preset
dosage adapted to the dimensions of most standard junction boxes.
Suitable for sealing outdoor automated devices, intercoms, outdoor electrical and swimming
pool installations, etc.
Volume resistivity: > 2.1015 Ω/cm.
Voltage: from 0.6 to 1 kV.
Installation temperature: +0 °C to +40 °C.
Fast reticulation: less than 10 minutes at 23 °C.
Protection index: IP68.

Dosage preset according to the box to be ﬁlled.
Power may be switched back on in under 10 minutes.
Non toxic.
No shelf-life.
Polymerisation, even at low temperatures.
Reference
Net volume (ml)
Dimensions of junction boxes to fill (L x W x H mm)
BIZ 710 305
170
Ø 60
BIZ 710 306
210
Ø 80
BIZ 710 307
420
100 x 100 x 50 ou 120 x 80 x 50
BIZ’GEL MAX SEALING GEL
SELF-AMALGAMATING and REUSABLE bi-component gel.
Contained in a single bottle with separation, the 2 components must be mixed with a 1:1
ratio.
Ideal for sealing junction boxes outdoors or in damp environments.
Voltage: up to 1 kV.
Fast reticulation: 15 minutes approx. at 25 °C.

Reusable!
Self-amalgamating.
Power back on within 15 minutes approx.
Non toxic.
No shelf-life.
Reference
Net volume (l)
BIZ 710 395
26
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
1
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CONNECTIONS SEALING
BIZ’GEL EXPRESS SEALING GEL
Injectable and ready-to-use mono-component gel in 280 ml cartridge.
Ideal for watertitghness of confined junction boxes, just inject BIZ'GEL EXPRESS regardless of
the position of your junction box or connection system.
Ideal solution for watertightness of all junction boxes in your worksites!
Voltage: up to 1 kV.

Already cross-linked, ready to use.
Reusable.
Self-amalgamating.
Usable immediately at low temperature down to -40 °C!
No mixing, no waiting time.
Non toxic.
No shelf-life.
Reference
Net volume (ml)
BIZ 710 000
ACCESSORY
280
GUN FOR CARTRIDGES AND INTUMESCENT FOAM
Reference
BIZ 710 320
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
For cartridges max. (ml)
Length (mm)
330
400
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
(g)
800
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Body and trigger in reinforced steel.
Aluminium handle.
No-drip function.
Compatible with intumescent foam BIZ 710 319.
27
CONNECTIONS SEALING
SQUALE MINI
Connector's sealing cover for cables with a section up to 4 mm².
Supplied by 8 without connection system.
Ensures quick and safe sealing of your connections.
Ideal in outdoor, damp or immersed environments.
Contains neutral and non toxic insulating gel.

IP68 for immersed installations.
Quick repair of your damaged cables.
Non toxic.
Reference
BIZ 710 293
Capacity 1 conductor (mm²)
Capacity 2 conductors (mm²)
Dimensions (mm)
Quantity
1-4
1-4
61 x 18
8
SQUALE CONNECTION KITS
For connecting, insulating, sealing and protecting copper electrical cables.
Supplied with cable centring device and cable ties for holding conduits.
Voltage: 0.6 to 1 kV.
Protection rating: IP68.

IP 68 for immersed installations.
Full range dedicated to residential and tertiary.
Non toxic.
Reference
Capacity 1 conductor (mm²)
Dimensions (mm)
2.5-50
2.5-6
2.5-6
2.5-6
105 x 55
BIZ 710 298
2.5-150
2.5-16
2.5-10
2.5-10
180 x 60
BIZ 710 299
120-240
16-35
10-25
10-25
210 x 65
BIZ 710 294
SQUALE CONNECTION KITS FOR JUNCTION
For connecting, insulating, sealing and protecting copper electrical cables.
Ideal in outdoor, damp and immersed environments.
Voltage: 0.6 to 1 kV.
Protection rating: IP68.
Supplied with 5-input connection system and 4 cable ties for perfect watertightness.

IP68 watertightness for your junctions.
Easy and quick installation.
Comprehensive product with connection system.
Non toxic.
Reference
28
Main cable capacity (mm²)
Junction cable capacity (mm²)
Main cable maximum Ø (mm)
Junction cable maximum Ø (mm)
Dimensions (mm)
BIZ 710 308
Up to 5 x 1.5 to 6
Up to 5 x 1.5 to 4
22.5
18.5
138 x 60 x 37
BIZ 710 309
Up to 5 x 4 to 16
Up to 5 x 1.5 to 4
26
18.5
194 x 74 x 43
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
RT2012 (FRENCH THERMAL REGULATION) FLUSH-MOUNTING BOXES AND ACCESSORIES
AIRTIGHT FLUSH-MOUNTING BOXES FOR DRY WALLS
ONE-GANG FLUSH-MOUNTING BOXES R'BOX
Compliant with the french Thermal Regulation 2012.
For dry partition and air tightness.
IP20.
Glow wire test at 850 °C.
Vertical adjustments with 3 screws.
Mixed recess screws accepting the constraint of a drill.
Fast pitch screws for instant mounting.

Metallic guided ﬂaps.
Thin wide ﬂanges.
Captive screw.
Anti-rotation system.
Large wiring volume.
98 % air tightness.
Reference
Depth (mm)
Ø (mm)
BIZ 500 140
40
67
BIZ 500 150
50
67
PACK OF 100 ONE-GANG FLUSH-MOUNTING BOXES R'BOX
Supplied with 67 mm Ø hole saw.
Reference
BIZ 500 100
Depth (mm)
Ø (mm)
Quantity
40
67
100
Reference
BIZ 500 132
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Depth (mm)
Ø (mm)
40
85
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
32 A ONE-GANG FLUSH-MOUNTING BOXES R'BOX
29
MULTI-GANGS FLUSH-MOUNTING BOXES
IP20.
Vertical adjustments with 3 screws.
Mixed recess screws accepting the constraint of a drill.
Fast pitch screws for instant mounting.

»
Horizontal/vertical mounting.
IP 20
Reference
Number of gangs
Ø (mm)
Depth (mm)
Interaxis (mm)
BIZ 500 240
2
67
40
71
BIZ 500 250
2
67
50
71
BIZ 500 340
3
67
40
71
BIZ 500 350
3
67
50
71
BIZ 500 440
4
67
40
71
BIZ 502 240
2x2
67
50
71
AIRTIGHT ACCESSORIES
SEALING PLUGS
Reference
Ø (mm)
Quantity per bag
BIZ 500 016
16
20
BIZ 500 020
20
20
BIZ 500 025
25
10
BIZ 500 032
32
1
BIZ 500 040
40
1
AIRTIGHT SLEEVES
To be used on airtight building shells crossed by the conduits to maintain
airtightness.
Reference
Number of inputs
Length (mm)
Width (mm)
Quantity per bag
1
150
150
10
BIZ 501 500
30
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
AIRTIGHT SLEEVES
Reference
Number of inputs
Length (mm)
Width (mm)
Quantity per bag
BIZ 500 850
1
85
85
10
BIZ 502 150
2
200
150
2
BIZ 502 000
4
200
200
2
SEALING INSERT FOR FLUSH-MOUNTING BOX
To be used on flush-mounting boxes in renovation when they could not be removed.
Reference
Ø (mm)
BIZ 500 141
67
AIRTIGHT CEILING LIGHT MOUNTING BOXES
CEILING LIGHT MOUNTING BOX R'BOX
Tapping accepting a fixing system up to 25 kg.
Automatic connection marked by Ph + N + Earth colour code to avoid failures.

Supplied with eyebolt and IP44 protection cap avoiding paint projections.
Curved rigid pre-holding cover.
Reference
BIZ 500 067
Depth (mm)
Ø (mm)
50
67
Reference
BIZ 527 067
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Type
Depth (mm)
Ø (mm)
R’Box DCL centre point kit 67 mm Ø + E27 socket
50
67
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
CEILING LIGHT MOUNTING BOX R'BOX KIT
31
CEILING LIGHT MOUNTING BOX FIX'R KIT
Fix'R model with automatic connection system turned at 45°.

Fix'R system integrates the securization of the ceiling light directly in the box.
Reference
BIZ 527 267
Type
R’Box DCL centre point kit 67 mm Ø + 2 m integrated
fixing + E27 socket
Depth (mm)
Ø (mm)
50
67
AIRTIGHT WALL LIGHT CONNECTION BOXES
WALL LIGHT MOUNTING BOX R'BOX
Reference
Depth (mm)
Ø (mm)
BIZ 500 154
40
54
BIZ 500 167
50
67
WALL LIGHT MOUNTING BOX R'BOX KIT

Supplied with IP44 protection cap avoiding paint projections.
Curved rigid pre-holding cover.
Reference
BIZ 506 027
32
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Depth (mm)
Ø (mm)
50
67
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
JUNCTION CASINGS R'BOX
Reference
Depth (mm)
Length (mm)
Width (mm)
BIZ 501 711
40
170
110
BIZ 502 519
50
250
190
Depth (mm)
Length (mm)
Width (mm)
80
250
250
JUNCTION CASING FOR ATTICS R'BOX

HEQ (High Environmental Quality) junction casing.
Reference
BIZ 502 525
ACCESSORIES
To drill steel, stainless steel, wood, metal and plastic.
Material: bi-metal HSS steel with 8 % cobalt.
Cutting depth: 38 mm.
HRC > 60.
Supplied without shaft.
Reference
BIZ 700 884
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Applications
Ø (mm)
Fittings
67
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
BI-METAL HSS HOLE SAW WITH 8 % COBALT
33
UNIVERSAL FLUSH MOUNTING BOXES AND ACCESSORIES
UNIVERSAL FLUSH MOUNTING BOX WITH OR WITHOUT SCREWS
Masonry.
Horizontal tube entry: 2 x 20 mm + 2 x 16 mm.
Vertical tube entry: 1 x 16 mm + 2 x 20 mm.
Ground tube entry: 4 x 16 mm.
Reference
Length (mm)
Width (mm)
Depth (mm)
Screw
BIZ 500 000
60
60
50
No
BIZ 500 001
60
60
65
No
BIZ 500 002
60
60
50
Yes
BIZ 500 003
60
60
65
Yes
ACCESSORY
INTERAXIS ADAPTER 71 MM
For universal flush mounting boxes:
BIZ 500 000/BIZ 500 001/BIZ 500 002/BIZ 500 003.
Reference
Depth (mm)
Length (mm)
Width (mm)
50
60
11
BIZ 500 013
ACCESSORY
COVER FOR FLUSH MOUNTING BOXES
Adapted cover for universal flush mounting boxes: BIZ 500 000/BIZ 500 001/BIZ 500 002/BIZ 500 003.
Reference
BIZ 500 014
UNIVERSAL AIRTIGHT FLUSH MOUNTING BOX
Masonry.
Horizontal tube entry: 2 x 20 mm + 2 x 16 mm.
Vertical tube entry: 2 x 20 mm + 2 x 16 mm.
Ground tube entry: 2 x 20 mm + 2 x 16 mm.
Airtight version with sealing diaphragms.

»
Insert cables or tubes without tools.
Built-in cable holding device, tube self blocking.
PEB energy certificate
Reference
Length (mm)
Width (mm)
Depth (mm)
Screw
60
60
50
Yes
BIZ 500 050
34
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
DRY WALL FLUSH MOUTING BOXES AND ACCESSORIES
DRY WALL FLUSH MOUNTING BOX
Dry walls.
Horizontal or vertical interaxis 71 mm.

With 2 ﬁtting screws.
Reference
Number of gangs
Depth (mm)
Ø (mm)
Punch in openings Ø 20 mm
Cable entries
BIZ 500 005
1
47
68
4
6
BIZ 500 006
1
61
68
4
6
BIZ 500 007
2
47
68
4
8
ACCESSORY
COVER FOR DRY WALL BOXES
Adapted cover for dry wall boxes.
Reference
Ø (mm)
BIZ 500 004
83
AIRTIGHT DRY WALL FLUSH MOUNTING BOX
Dry walls.
Airtight version with sealing diaphragms.

PEB energy certificate
Reference
Ø (mm)
Depth (mm)
Cable entries
BIZ 500 008
68
48
3 x 1.5/3 x 2.5 ou 5 x 1.5
BIZ 500 009
68
61
3 x 1.5/3 x 2.5 ou 5 x 1.5
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
With 2 ﬁtting screws.
Insert cables or tubes without tools.
Built-in cable holding device, tube self blocking.
35
PROTECTION FOR SPOTLIGHTS
BIZSPOT PROTECTION FOR SPOTLIGHTS
Designed to secure spotlights embedded in false ceilings.
Use BIZSPOT or the BIZSPOT + extension kit to create a space between the rear part
of the spotlight and the insulator inside the false ceiling, to create a ventilation zone
meeting the installation recommendations of fixture manufacturers.
This allows thermal calories to be dissipated, to prevent the insulator from being
damaged and risk of fire resulting from overheating.
Material: polyamide 6.6 charged with 15 % glass fibre.
Borehole: 60 to 90 mm.
Protection height at the insulator:
• Bizspot : 9.5 cm.
• Bizspot + extension: 17 cm.
Height under Bizspot for spot installation:
• Fitting in the false ceiling: 79.5 mm.
• Fitting on base: 95 mm.

Avoids overheating and risks of ﬁre due to heat generated by the ﬁxture in contact with the
insulating wool.
Creates a heat clearing zone over a height of 100 to 150 mm. Easy installation with its selfadjustment system.
Can be used on new or existing installations.
Compatible with halogen spotlights and most 5 and 10 W LED spotlights.
Reference
Quantity per box
BIZ 700 845
ACCESSORY
10
BIZSPOT EXTENSION
Designed specifically for the BIZSPOT, the extension creates additional space behind
your spotlight, for more ventilation as recommended for certain installations.
Height: 79.5 mm.
Maximum Ø: 200 mm.
Minimum Ø: 60 mm.
Protection height at the insulator:
• BIZSPOT only: 9.5 cm.
• BIZSPOT + extension: 17 cm.

Easy installation.
Maximum safety.
Reference
Quantity per box
BIZ 700 846
5
BIZSPOT FOR BLOW-IN INSULATION
Protection of embedded spotlights in case of blow-in insulation.
Borehole: 60 to 90 mm.

Designed speciﬁcally for blow-in insulation.
Easy installation with its self-adjustment system.
High thermal dissipation to avoid reducing the lifetime of embedded spotlights.
Reference
Quantity per bag
BIZ 700 900
36
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
5
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
LAMP SOCKETS AND DEVICES TO CONNECT LIGHT FIXTURES
PLUGS AND LAMP SOCKETS DEVICES DCL
(FRENCH REGULATION FOR THE CONNECTION OF LIGHT FIXTURES)
Safe and simple: switch to DCL!
1/ Apply the new standards:
Light fitting connection devices have become mandatory following the evolution of NF C15-100, for housing having building permits
filed since October 2001. Compliance of connection devices relies on the UTE C 61 390 and NF EN 61 184 standards for B22
sockets and NF EN 60 238 for E27 sockets.
2/ Make your life easier:
Light fittings are connected or disconnected easily in a single operation, without tool.
3/ Reinforce safety:
DCL plugs and sockets feature a flexible tab ensuring proper mechanical linking of the connector with the DCL box. The light fitting
hangs from the center box hook.
DCL E27 SOCKET AND PLUG
To implement temporary lighting without tool and the light dot test.
Suitable for energy saving lamps.
Supplied with a DCL 2P+E - 6 A detachable socket.
For subsequent connection of a class I or II luminary - E27 socket, 4 A-75 W maximum.

Perfectly suitable for energy saving lamps.
Reference
BIZ 620 161
DCL B22 SOCKET AND PLUG
To implement temporary lighting without tool and the light dot test.
Suitable for energy saving lamps.
Supplied with a DCL 2P+E - 6 A detachable socket.
For subsequent connection of a class I or II luminary - B22 socket, 2 A-75 W maximum.

Perfectly suitable for energy saving lamps.
Reference
BIZ 620 162
DCL PLUG
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Used for simple connection before clipping in the DCL box.
2P + E - 6 A - 250 V~.
Screw connector for conductors 0.5 to 1mm².
Plug flush with box cover when clipped.
BIZ 620 160
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
37
STANDARD CEILING LIGHT MOUNTING BOXES
CEILING LIGHT MOUNTING BOX KIT FIX'R
Fix'R model with automatic connection system turned at 45°.

Fix'R system integrates the securization of the ceiling light directly in the box.
Reference
BIZ 512 627
Depth (mm)
Ø (mm)
50
67
CEILING LIGHT MOUNTING BOX
Reference
BIZ 510 067
Depth (mm)
Ø (mm)
50
67
COVERS FOR CEILING LIGHT MOUNTING BOXES
COVERS
Curved rigid cover.

Pre-holding system without cup hooks.
Reference
38
Type
Ø (mm)
BIZ 500 085
DCL cover 85 mm Ø
85
BIZ 500 120
DCL cover 120 mm Ø
120
BIZ 544 085
DCL 85 mm Ø cover with IP44 watertightness gasket
85
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
COVERS AND HOOKS
Reference
Type
Ø (mm)
BIZ 501 285
DCL 120 mm cover with 85 mm hook
120
BIZ 501 210
DCL 120 mm cover with 100 mm hook
120
COVERS AND CUP HOOKS KIT
Kit contains:
• 1 DCL 120 mm Ø cover with 85 mm cup hooks.
• 1 E27 socket.
Reference
BIZ 527 128
CUP HOOKS
Reference
Length (mm)
Quantity per bag
BIZ 510 100
100
10
BIZ 510 085
85
10
BIZ 510 120
120
10
BIZ 510 130
130
10
BIZ 510 145
145
10
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Insulated cup hooks.
39
WORKSITE LAMP SOCKETS
Applications:
Special renovation lamp holders.
Technical details:
Maximum lamp power: 250 V~ - 2 A - 100 W.
Automatic connection for rigid cable.
Cable clamp (installation tester) and clip-in lid.
Removable tester and lid.
Benefits:
Can be fitted without tool by closing the lid around the clipped-in and connected holder.
E27 LAMPHOLDER
Reference
BIZ 620 102
E27 LAMPHOLDER TESTER
Reference
BIZ 620 103
B22 LAMPHOLDER
Reference
BIZ 620 101
B22 LAMPHOLDER TESTER
Reference
40
BIZ 620 100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
PLASTIC LAMP SOCKETS
Applications:
Replacement lamp holders.
Technical details:
Maximum lamp power 250 V~-4 A-150 W .
Nylon lamp holders.
Clamp holder locking device.
Threaded fitting: 10 mm Ø.
SINGLE RING E27 LAMPHOLDER
Reference
BIZ 620 112
DOUBLE RING E27 LAMPHOLDER
Reference
BIZ 620 113
SINGLE RING B22 LAMPHOLDER
Reference
BIZ 620 110
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
DOUBLE RING B22 LAMPHOLDER
BIZ 620 111
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
41
CABLE WALL PLATES
AIRTIGHT CABLE WALL PLATES
IP44 16/20 A SCREW-ON CABLE WALL PLATE
Material: polycarbonate.
Screw fixing.
Apparent screws.
IP44 sealing gasket.
Reference
BIZ 700 983
IP44 16/20 A CLAW CABLE WALL PLATE
Screw and/or claw fixing.
IP44 sealing gasket.
Reference
BIZ 700 984
LEAKY CABLE WALL PLATES
10/20 A CLAW FIXING CABLE WALL PLATE
Screw and/or claw fixing.
»
UTE-C 61-392
Reference
BIZ 700 982
10/20 A SCREW FIXING CABLE WALL PLATE
Screw fixing.
Visible screws.
»
UTE-C 61-392
Reference
BIZ 700 980
20/32 A SCREW FIXING CABLE WALL PLATE
Screw fixing.
Visible screws.
»
UTE-C 61-392
Reference
42
BIZ 700 981
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
EARTHING
GALVANIZED STEEL CRUCIFORM EARTH RODS
Pointed tip rods for easier ground penetration.
Reference
Material
Length (m)
BIZ 710 810
Galvanised steel
1.5
3.810
BIZ 710 811
Galvanised steel
2
5.040
(kg)
GALVANIZED STEEL ROUND EARTH RODS
Earthing domestic installations.
Ø: 16 mm.
Strength 70 kg/mm².
Connecting clamp max tightening capacity 50 mm² stranded copper.
Hot galvanised steel to EN ISO 1461.
Coating thickness between 85 and 105 μ.
»
NFC 15-100
Reference
Length (m)
BIZ 710 803
1
BIZ 710 804
1.5
BIZ 710 805
2
GALVANIZED STEEL CLOVERLEAF EARTH RODS
Earthing domestic installations.
Ø: 16 mm.
Strength 70 kg per mm².
Connecting clamp max tightening capacity 50 mm² stranded copper.
Hot galvanised steel to EN ISO 1461.
Coating thickness between 85 and 105 μ.
»
NFC 15-100
Reference
Length (m)
BIZ 710 800
1
BIZ 710 801
1.5
BIZ 710 802
2
COPPER-PLATED STEEL ROUND EARTH RODS
Steel earth rods coated with a 100 μ copper coat.
Use threaded sleeves to assemble several rods up to the length required.
Material
Copper thickness (μm)
Thread type
Length (m)
Ø (mm)
BIZ 710 812
Reference
Steel
100
5/8"
1.5
14.2
1.9
BIZ 710 813
Steel
100
5/8"
2.1
14.2
2.53
BIZ 710 814
Steel
100
3/4"
1.5
17.2
2.7
BIZ 710 815
Steel
100
3/4"
2.1
17.2
3.6
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
(kg)
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

43
EARTHING
CONNECTING SLEEVES FOR COPPER-PLATED STEEL EARTH RODS
To connect two threaded earth rods together.
Reference
Material
Thread type
Ø (mm)
Length (mm)
BIZ 710 430
Brass
5/8"
22
60
BIZ 710 431
Brass
3/4"
24
60
EARTH CLAMPS FOR COPPER-PLATED STEEL EARTH RODS
For connecting the earth cable to the earth rod.
Reference
Material
Thread type
Tightening torque (Nm)
BIZ 710 432
Brass
5/8"
22
BIZ 710 433
Brass
3/4"
22
DRIVING HEADS FOR COPPER-PLATED STEEL EARTH RODS
For safe driving of threaded earth rods.
Reference
Material
Thread type
BIZ 710 434
Steel
5/8"
BIZ 710 435
Steel
3/4"
PLASTIC INSPECTION PORT
Height: 100 mm.
Internal Ø (under lid): 170 mm.
Internal Ø (under base): 190 mm.
"Earthing" indicated on lid.
Reference
44
BIZ 710 300
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
EARTHING
EARTHING ISOLATION BARS
For disconnecting the installation from the earth rod to measure the earth resistance.
For connecting the earth from the installation to the earth rod.
For cables with a section up to 45 mm².
Reference
Strip type
Insulation type
Section (mm²)
Length (mm)
Height (mm)
BIZ 710 286
Low
Plastic without plate
45
12.5
20
Width (mm)
3
BIZ 710 426
Low
Plastic without plate
2 x 45 + 8 x 10
12.5
20
12.2
BIZ 710 301
High
Porcelain and metal plate
45
150
65
3
EARTHING CLAMPS WITH LABEL
Earthing conductors (for example galvanised steel, copper, stainless steel pipe systems, etc.).
Supplied with a "Don't disconnect" label (not fitted).

1 screw for tightening around the pipe.
1 screw for the earth connection.
Reference
Tube clamping capacity
(mm)
8-17.5
Tongue Material
BIZ 710 450
Tinned bronze
BIZ 710 451
Nickel-plated gunmetal
BIZ 710 452
Nickel-plated gunmetal
Section (mm²)
Tab length (mm)
Tongue width (mm)
Quantity per box
1 x 2.5/2 x 6
120
15
10
17.5-48
1 x 2.5/2 x 16
200
15
7
17.5-114
1 x 2.5/2 x 16
400
23
6
EARTHING CLAMPS WITHOUT LABEL
Earthing conductors (for example galvanised steel, copper, stainless steel pipe systems, etc.).

1 screw for tightening around the pipe
1 screw for the earth connection.
Reference
Tongue Material
BIZ 710 445
Stainless steel
Tube clamping capacity
(mm)
14-38
BIZ 710 446
Stainless steel
BIZ 710 447
BIZ 710 448
Section (mm²)
Tab length (mm)
Tongue width (mm)
Quantity per box
2.5-16
120
20
10
14-52
2.5-16
190
20
10
Stainless steel
14-114
2.5-16
420
20
10
Stainless steel
14-168
2.5-16
600
20
10
EARTH TERMINALS
»
NFC 15-100
Reference
Type
Section (mm²)
Quantity per box
BIZ 710 287
M6
25
30
BIZ 710 288
M6
35
20
BIZ 710 289
M6
60
12
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
For fixing to and earthing cable trays.
Material: brass.
Terminals with threaded screws.
45
EARTHING
EARTH DISTRIBUTION BLOCK
For connecting:
• 1 35 mm² maximum cable without cutting (main line).
• 4 subscriber lines, 25 mm² maximum.
• 1 35 mm² junction maximum (or fifth subscriber line).
Material: brass profile, PC/ABS enclosure.
Protection index IPXXB.
Reference
Length (mm)
Width (mm)
Height (mm)
110
40
40
BIZ 710 304
BRASS NUT AND SCREW KIT
Used with M6 earth terminals and bi-metal washers. M6 for fixing to cable trays.
Kit containing:
• 50 M6 x 22 mm brass screws equipped with a non-threaded part for fitting a bimetal
washer.
• 50 M6 hexagonal brass nuts - DIN 934.
Reference
BIZ 710 303
BI-METAL WASHERS
Fixing earth terminals to cable trays.
Ideal for installing photovoltaic panels.

Avoids electrochemical corrosion (galvanic couple) between metal parts made of different
materials DIN 46 228 part 1.
Reference
Washer Ø (mm)
Hole type
Thickness (mm)
Quantity per box
30
M6
2
50
Dimensions (mm)
BIZ 710 302
CLAW LINKS EARTH CONNECTORS
For earth cable connections or junctions.
Reference
46
Body Material
Screw Material
Section (mm²)
BIZ 710 437
Brass
Galvanized steel
6-25
25 x 25 x 21
BIZ 710 436
Brass
Galvanized steel
16-50
35 x 30 x 23
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CABLE ENDS
SINGLE CABLE ENDS
Enables a reliable, equipotential link to be created on a multi-strand wire.
Socket material: tinned electrolytic copper.
Insulating material: polypropylene collar.

»
Halogen free.
Colour code according to NFC 63-023
Reference
Section (mm²)
L1 (mm)
L2 (mm)
Size 1 (mm)
S1 (mm)
Size 2 (mm)
S2 (mm)
Colour
Quantity
BIZ 225 001
0.5
13.5
8
1.1
0.15
2.5
0.25
White
100
Packaging type
Bag
BIZ 225 002
0.75
14
8
1.3
0.15
2.8
0.25
Blue
100
Bag
BIZ 225 003
1
14.5
8
1.5
0.15
3
0.3
Red
100
Bag
BIZ 225 004
1.5
14.5
8
1.8
0.15
3.4
0.3
Black
100
Bag
BIZ 225 005
2.5
15
8
2.3
0.15
4.2
0.3
Grey
100
Bag
BIZ 225 006
4
18
10
2.9
0.2
4.8
0.3
Orange
100
Bag
BIZ 225 007
6
20
12
3.6
0.2
6.2
0.3
Green
100
Bag
BIZ 225 008
10
21
12
4.6
0.2
7.5
0.3
Brown
100
Bag
BIZ 225 009
16
23
12
6
0.2
8.8
0.4
White
100
Bag
BIZ 225 010
25
31
18
7.5
0.2
11
0.5
Black
50
Bag
BIZ 225 101
0.5
13.5
8
1.1
0.15
2.5
0.25
White
500
Carton box
BIZ 225 102
0.75
14
8
1.3
0.15
2.8
0.25
Blue
500
Carton box
BIZ 225 103
1
14.5
8
1.5
0.15
3
0.3
Red
500
Carton box
BIZ 225 104
1.5
14.5
8
1.8
0.15
3.4
0.3
Black
500
Carton box
BIZ 225 105
2.5
15
8
2.3
0.15
4.2
0.3
Grey
500
Carton box
SINGLE CABLE ENDS SP
Enables a reliable, equipotential link to be created on a multi-strand wire.
Halogen free.
Reference
Section (mm²)
L1 (mm)
L2 (mm)
Size 1 (mm)
S1 (mm)
Size 2 (mm)
S2 (mm)
Colour
Quantity
BIZ 000 900
0.5
14.5
8.2
1
0.15
2.6
0.25
White
100
BIZ 000 905
0.75
14.6
8.2
1.2
0.15
2.8
0.25
Blue
100
BIZ 000 910
1
14.6
8.2
1.4
0.15
3
0.25
Red
100
BIZ 000 915
1.5
14.6
8.2
1.7
0.15
3.5
0.25
Black
100
BIZ 000 935
10
21.5
12
4.5
0.2
7.6
0.4
Brown
100
BIZ 000 940
16
22.2
12
5.8
0.2
8.8
0.4
Beige
100
BIZ 000 920
2.5
15.2
8.2
2.2
0.15
4
0.25
Grey
100
BIZ 000 945
25
29
16
7.3
0.2
11.2
0.4
Black
50
BIZ 000 950
35
30
16
8.3
0.2
12.5
0.5
Red
50
BIZ 000 925
4
16.5
9
2.8
0.2
4.4
0.3
Orange
100
BIZ 000 955
50
36
19
10.3
0.3
15
0.6
Blue
50
BIZ 000 930
6
20
12
3.5
0.2
6.3
0.3
Green
100
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

47
CABLE ENDS
DOUBLE CABLE ENDS
Enables a reliable, equipotential link to be created with two multi-strand conductors.
Ideal for inserting two conductors into a single terminal.

»
Halogen free.
Colour code according to NFC 63-023
Reference
Section (mm²)
L1 (mm)
L2 (mm)
Size 1 (mm)
S1 (mm)
Size 2 (mm)
S2 (mm)
Colour
BIZ 225 050
2 x 0.75
15
8
1.8
0.15
2.6/4.5
0.25
Blue
Quantity per box
100
BIZ 225 051
2x1
15
8
2.05
0.15
3.0/5.1
0.3
Red
100
BIZ 225 052
2 x 1.5
16
8
2.3
0.15
3.5/6.4
0.3
Black
100
BIZ 225 053
2 x 2.5
18.5
10
2.9
0.2
4.0/7.5
0.25
Grey
100
Quantity per box
DOUBLE CABLE ENDS SP
Reference
48
Section (mm²)
L1 (mm)
L2 (mm)
Size 1 (mm)
S1 (mm)
Size 2 (mm)
S2 (mm)
Colour
BIZ 000 960
0.5
15
8
1.5
0.15
4.7
0.25
White
100
BIZ 000 962
0.75
15
8
1.8
0.15
5
0.25
Grey
100
BIZ 000 964
1
15
8
2.3
0.15
5.4
0.3
Red
100
BIZ 000 966
1.5
16
8
2.3
0.15
6.6
0.3
Black
100
BIZ 000 974
10
26
14
6.5
0.2
13
0.4
Red
100
100
BIZ 000 976
16
30
14
8.3
0.3
18.4
0.4
Blue
BIZ 000 968
2.5
18.5
10
2.9
0.2
7.8
0.3
Blue
100
BIZ 000 970
4
23
12
3.8
0.2
8.8
0.3
Grey
100
BIZ 000 972
6
26
14
4.9
0.2
10
0.4
Yellow
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
PRE-INSULATED TERMINALS AND SLEEVES
Bizline proposes a complete UL-approved range of pre-insulated terminals and sleeves with PVC insulator.
The ring and forked terminals as well as the sleeves are made with a tongue in electrolytic copper, whereas clips are in brass.
All terminals are tin-coated to protect them from oxidation and are striated to enhance contact with the cable and increase the
resistance to traction after crimping.
Maximum conditions of use: 105 °C and 600 V for round and fork terminals, 75 °C and 300 V for clips and sleeves.
PRE-INSULATED TERMINALS AND SLEEVES, WIRE CROSS-SECTION 0.5 TO 1.5 MM²
EN 61210
BIZ 230 000
Ring terminal
Connector
Screw Ø (mm)
material
Tinned copper
3
BIZ 230 001
Ring terminal
Tinned copper
BIZ 230 002
Ring terminal
BIZ 230 003
BIZ 230 004
Reference
Type
A (mm)
T (mm)
L (mm)
5.5
3.2
18.7
4
1.7
0.75
100
4
6.6
4.3
20.6
4
1.7
0.75
100
Plastic box
Tinned copper
5
8
5.3
22
4
1.7
0.75
100
Plastic box
Ring terminal
Tinned copper
6
11.6
6.4
28
4
1.7
0.75
100
Plastic box
Ring terminal
Tinned copper
8
11.6
8.4
28
4
1.7
0.75
100
Plastic box
BIZ 230 005
Ring terminal
Tinned copper
10
13.6
10.5
31.7
4
1.7
0.75
100
Plastic box
BIZ 251 000
Fork terminal
Tinned copper
3
5.7
3.2
22.2
4
1.7
0.75
100
Plastic box
BIZ 251 001
Fork terminal
Tinned copper
4
6.4
4.3
22.2
4
1.7
0.75
100
Plastic box
BIZ 251 002
Fork terminal
Tinned copper
5
8.1
5.3
22.2
4
1.7
0.75
100
Plastic box
BIZ 251 003
Fork terminal
Tinned copper
6
9.5
6.4
22.2
4
1.7
0.75
100
Plastic box
BIZ 251 004
Fork terminal
Tinned copper
8
14
84
27.5
4
1.7
0.75
100
Plastic box
BIZ 245 001
Sleeve
Tinned copper
-
-
-
24.6
4
1.8
-
100
Plastic box
BIZ 240 001
Tab terminal
Tinned brass
-
6.35
-
21
4
1.7
0.8
100
Plastic box
BIZ 235 002
Receptacle terminal, 6,3 x 0.5 mm
Tinned brass
-
6.6
-
20.5
4
1.7
0.4
100
Plastic box
BIZ 235 001
Receptacle terminal, 2.8 x 0.5 mm
Tinned brass
-
3.2
-
18.6
4
1.7
0.3
100
Plastic box
BIZ 235 003
Tinned brass
-
3.2
-
18.6
4
1.7
0.3
100
Plastic box
BIZ 235 030
Tinned brass
-
6.6
-
22
4
1.7
0.4
100
Plastic box
BIZ 235 051
Tinned brass
-
3.2
-
18.6
4
1.7
0.3
100
Plastic box
BIZ 235 052
Tinned brass
-
3.2
-
18.6
4
1.7
0.3
100
Plastic box
BIZ 241 001
Tab/Receptacle terminal 6.3 x 0.8 mm
Tinned brass
-
6.6
6.35
22
4
1.7
0.4
100
Plastic box
BIZ 000 602
Ring terminal
Tinned copper
3
5.5
3.2
18.7
4
1.7
0.75
100
Bag
BIZ 000 600
Ring terminal
Tinned copper
4
6.6
4.3
20.6
4
1.7
0.75
100
Bag
BIZ 000 605
Ring terminal
Tinned copper
5
8
5.3
22
4
1.7
0.75
100
Bag
BIZ 000 610
Ring terminal
Tinned copper
6
11.6
6.4
28
4
1.7
0.75
100
Bag
BIZ 000 611
Ring terminal
Tinned copper
8
11.6
8.4
28
4
1.7
0.75
100
Bag
BIZ 000 612
Ring terminal
Tinned copper
10
13.6
10.5
31.7
4
1.7
0.75
100
Bag
BIZ 000 800
Fork terminal
Tinned copper
3
5.7
3.2
22.2
4
1.7
0.75
100
Bag
BIZ 000 805
Fork terminal
Tinned copper
4
6.4
4.3
22.2
4
1.7
0.75
100
Bag
BIZ 000 810
Fork terminal
Tinned copper
5
8.1
5.3
22.2
4
1.7
0.75
100
Bag
BIZ 000 815
Fork terminal
Tinned copper
6
9.5
6.4
22.2
4
1.7
0.75
100
Bag
BIZ 000 816
Fork terminal
Tinned brass
8
14
84
27.5
4
1.7
0.75
100
Bag
BIZ 000 870
Sleeve
Tinned brass
-
-
-
24.6
4
1.8
-
100
Bag
BIZ 000 880
Tab terminal
Tinned brass
-
6.35
-
21
4
1.7
0.8
100
Bag
BIZ 000 850
Tinned brass
-
3.2
-
18.6
4
1.7
0.3
100
Bag
BIZ 000 851
Tinned brass
-
6.6
-
20.5
4
1.7
0.4
100
Bag
BIZ 000 852
Tinned brass
-
3.2
-
18.6
4
1.7
0.3
100
Bag
BIZ 000 865
Tinned brass
-
6.6
-
22
4
1.7
0.4
100
Bag
BIZ 000 866
Fully insulated receptacle terminal, 2.8 x 0.5 mm
Tinned brass
-
3.2
-
18.6
4
1.7
0.3
100
Bag
BIZ 000 867
Fully insulated receptacle terminal, 2.8 x 0.8 mm
Tinned brass
-
3.2
-
18.6
4
1.7
0.3
100
Bag
BIZ 000 875
Male/Female Clip 6.3 x 0.8 mm
Tinned brass
-
6.6
6.35
22
4
1.7
0.4
100
Bag
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
E Ø (mm) Ø I (mm) Thickness (mm) Quantity Packaging type
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
Plastic box
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
49
PRE-INSULATED TERMINALS AND SLEEVES, WIRE CROSS-SECTION 1,5 TO 2,5 MM²
»
EN 61210
BIZ 230 006
Ring terminal
Connector
Screw Ø (mm)
material
Tinned copper
3
6.6
3.2
19.3
4.5
2.3
0.8
100
Plastic box
BIZ 230 010
Ring terminal
Tinned copper
4
6.6
4.3
20.9
4.5
2.3
0.8
100
Plastic box
BIZ 230 011
Ring terminal
Tinned copper
5
8.5
5.3
23.3
4.5
2.3
0.8
100
Plastic box
BIZ 230 012
Ring terminal
Tinned copper
6
12
6.4
28.3
4.5
2.3
0.8
100
Plastic box
BIZ 230 013
Ring terminal
Tinned copper
8
12
8.4
28.5
4.5
2.3
0.8
100
Plastic box
BIZ 230 014
Ring terminal
Tinned copper
10
13.6
10.5
32
4.5
2.3
0.8
100
Plastic box
BIZ 251 005
Fork terminal
Tinned copper
3
5.7
3.2
22.5
4.5
2.3
0.8
100
Plastic box
BIZ 252 001
Fork terminal
Tinned copper
4
6.4
4.3
22.5
4.5
2.3
0.8
100
Plastic box
BIZ 252 002
Fork terminal
Tinned copper
5
7.9
5.3
22.5
4.5
2.3
0.8
100
Plastic box
BIZ 252 003
Fork terminal
Tinned copper
6
9.3
6.4
22.5
4.5
2.3
0.8
100
Plastic box
BIZ 252 004
Fork terminal
Tinned copper
8
14
8.4
27.8
4.5
2.3
0.8
100
Plastic box
BIZ 252 005
Fork terminal
Tinned copper
10
17.5
10.5
32.2
4.5
2.3
0.8
100
Plastic box
BIZ 245 020
25 mm long sleeve
Tinned copper
-
-
-
24.6
4.5
2.3
-
100
Plastic box
BIZ 240 010
Tab terminal 6.3 x 0.8 mm
Tinned brass
-
6.35
-
21
4.5
2.3
0.4
100
Plastic box
BIZ 235 010
Tinned brass
-
6.6
-
20.5
4.5
2.3
0.4
100
Plastic box
BIZ 235 040
Tinned brass
-
6.6
-
22
4.5
2.3
0.4
100
Plastic box
BIZ 241 010
Tinned brass
-
6.6
6.35
22
4.5
2.3
0.4
100
Plastic box
BIZ 000 614
Ring terminal
Tinned copper
3
6.6
3.2
19.3
4.5
2.3
0.8
100
Bag
BIZ 000 615
Ring terminal
Tinned copper
4
6.6
4.3
20.9
4.5
2.3
0.8
100
Bag
BIZ 000 620
Ring terminal
Tinned copper
5
8.5
5.3
23.3
4.5
2.3
0.8
100
Bag
BIZ 000 625
Ring terminal
Tinned copper
6
12
6.4
28.3
4.5
2.3
0.8
100
Bag
BIZ 000 626
Ring terminal
Tinned copper
8
12
8.4
28.5
4.5
2.3
0.8
100
Bag
BIZ 000 627
Ring terminal
Tinned copper
10
13.6
10.5
32
4.5
2.3
0.8
100
Bag
BIZ 000 819
Fork terminal
Tinned copper
3
5.7
3.2
22.5
4.5
2.3
0.8
100
Bag
BIZ 000 820
Fork terminal
Tinned copper
4
6.4
4.3
22.5
4.5
2.3
0.8
100
Bag
BIZ 000 825
Fork terminal
Tinned copper
5
7.9
5.3
22.5
4.5
2.3
0.8
100
Bag
BIZ 000 830
Fork terminal
Tinned copper
6
9.3
6.4
22.5
4.5
2.3
0.8
100
Bag
BIZ 000 831
Fork terminal
Tinned copper
8
14
8.4
27.8
4.5
2.3
0.8
100
Bag
BIZ 000 832
Fork terminal
Tinned copper
10
17.5
10.5
32.2
4.5
2.3
0.8
100
Bag
BIZ 000 871
25 mm long sleeve
Tinned brass
-
-
-
24.6
4.5
2.3
-
100
Bag
BIZ 000 881
Tinned brass
-
6.35
-
21
4.5
2.3
0.8
100
Bag
BIZ 000 855
Tinned brass
-
6.6
-
20.5
4.5
2.3
0.8
100
Bag
Fully insulated receptacle terminal, 6.3 x 0.8 mm Tinned brass
-
6.6
-
22
4.5
2.3
0.8
100
Bag
-
6.6
6.35
22
4.5
2.3
0.8
100
Bag
Reference
BIZ 000 868
BIZ 000 876
50
Type
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Tinned brass
A (mm)
T (mm)
L (mm)
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
PRE-INSULATED TERMINALS AND SLEEVES, WIRE CROSS-SECTION 4 TO 6 MM²
»
EN 61210
BIZ 230 018
Ring terminal
Connector
Screw Ø (mm)
material
Tinned copper
3
7.2
3.7
23.8
6.3
3.4
1
100
Plastic box
BIZ 230 019
Ring terminal
Tinned copper
4
7.2
4.3
23.8
6.3
3.4
1
100
Plastic box
BIZ 230 020
Ring terminal
Tinned copper
5
9.5
5.3
27.1
6.3
3.4
1
100
Plastic box
BIZ 230 021
Ring terminal
Tinned copper
6
12
6.4
30.6
6.3
3.4
1
100
Plastic box
BIZ 230 022
Ring terminal
Tinned copper
8
15
8.4
35.1
6.3
3.4
1
50
Plastic box
BIZ 230 023
Ring terminal
Tinned copper
10
15
10.5
35.1
6.3
3.4
1
50
Plastic box
BIZ 253 004
Fork terminal
Tinned copper
3
7.2
3.7
25.5
6.3
3.4
1
100
Plastic box
BIZ 253 000
Fork terminal
Tinned copper
4
7.2
4.3
25.5
6.3
3.4
1
100
Plastic box
BIZ 253 001
Fork terminal
Tinned copper
5
9
5.3
26.6
6.3
3.4
1
100
Plastic box
BIZ 253 002
Fork terminal
Tinned copper
6
9
6.4
26.6
6.3
3.4
1
100
Plastic box
BIZ 253 003
Fork terminal
Tinned copper
8
14
8.4
31.6
6.3
3.4
1
50
Plastic box
BIZ 245 030
30 mm long sleeve
Tinned copper
-
-
-
26.5
6.3
3.4
-
100
Plastic box
BIZ 240 020
Tinned brass
-
6.35
-
24
6.3
3.4
0.4
100
Plastic box
BIZ 235 020
Tinned brass
-
6.6
-
23.5
6.3
3.4
0.4
50
Plastic box
Reference
Type
A (mm)
T (mm)
L (mm)
BIZ 235 054
Tinned brass
-
6.6
-
24.3
6.3
3.4
0.4
100
Plastic box
BIZ 241 020
Tinned brass
-
6.6
6.35
24
6.3
3.4
0.4
100
Plastic box
BIZ 000 628
Ring terminal
Tinned copper
3
7.2
3.7
23.8
6.3
3.4
1
100
Plastic box
BIZ 000 629
Ring terminal
Tinned copper
4
7.2
4.3
23.8
6.3
3.4
1
100
Bag
BIZ 000 630
Ring terminal
Tinned copper
5
9.5
5.3
27.1
6.3
3.4
1
100
Bag
BIZ 000 635
Ring terminal
Tinned copper
6
12
6.4
30.6
6.3
3.4
1
100
Bag
BIZ 000 640
Ring terminal
Tinned copper
8
15
8.4
35.1
6.3
3.4
1
50
Bag
BIZ 000 645
Ring terminal
Tinned copper
10
15
10.5
35.1
6.3
3.4
1
50
Bag
BIZ 000 834
Fork terminal
Tinned copper
3
7.2
3.7
25.5
6.3
3.4
1
100
Bag
BIZ 000 835
Fork terminal
Tinned copper
4
7.2
4.3
25.5
6.3
3.4
1
100
Bag
BIZ 000 840
Fork terminal
Tinned copper
5
9
5.3
26.6
6.3
3.4
1
100
Bag
BIZ 000 845
Fork terminal
Tinned copper
6
9
6.4
26.6
6.3
3.4
1
100
Bag
BIZ 000 846
Fork terminal
Tinned copper
8
14
8.4
31.6
6.3
3.4
1
50
Bag
BIZ 000 872
30 mm long sleeve
Tinned brass
-
-
-
26.5
6.3
3.4
-
100
Bag
BIZ 000 882
Tinned brass
-
6.35
-
24
6.3
3.4
0.4
100
Bag
BIZ 000 860
Tinned brass
-
6.6
-
23.5
6.3
3.4
0.4
50
Bag
Fully insulated receptacle terminal, 6.3 x 0.8 mm Tinned brass
-
6.6
-
24.3
6.3
3.4
0.4
100
Bag
-
6.6
6.35
24
6.3
3.4
0.4
100
Bag
BIZ 000 869
Tinned brass
BIZ 000 877
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
51
ACCESSORY
CRIMPING PLIERS FOR PRE-INSULATED TERMINALS
Bizline terminals are UL homologated with these pliers.
Reference
Die identifier
Applications
Crimping section range (mm²)
BIZ 790 275
A
Crimping ring, forked terminals and sleeves
0.5-6
BIZ 790 276
C
Clip crimping
0.5-6
BOX OF 200 PRE-INSULATED LUGS AND CRIMPS
Contains:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
20
20
10
10
20
20
10
20
10
10
10
10
10
10
10
M4 red round terminals 0.5-1.5.
M4 blue round terminals 1.5-2.5.
M5 yellow round terminals 4-6.
red sleeves 0.5-1.5.
blue sleeves 1.5-2.5.
yellow sleeves 4-6.
red female clips 0.5-1.5 6,3 x 0.8 mm.
blue female clips 1.5-2.5 6,3 x 0.8 mm.
yellow female clips 4-6 6,3 x 0.8 mm.
Reference
BIZ 250 001
BOX OF 350 PRE-INSULATED LUGS AND CRIMPS
Selection box of 350 lugs (14 compartments with 25 lugs in each):
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
25
25
25
25
25
25
25
25
25
25
25
25
25
red female clips 0.5-1.5 6.35 x 0.8 mm.
blue female clips 1.5-2.5 6.35 x 0.8 mm.
red sleeves 0.5-1.5.
blue sleeves 1.5-2.5.
yellow sleeves 4-6.
Box with 14 compartments BIZ 700 529.
Reference
52
BIZ 250 000
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
COPPER TERMINAL LUGS
COPPER TERMINAL LUGS NFC 20-130
Body in annealed electrolytic copper ensuring optimum ductility for perfect crimping.
Flared barrel end for easy cable entry.
Inspection hole for verifying the correct position of the cable before crimping.

»
Optimum ductility to ensure perfect crimping.
Quick veriﬁcation of the installation before crimping with inspection hole.
NF C 20-130
Reference
Section (mm²)
Screw Ø (mm)
Inside Ø (mm)
Width (mm)
Quantity per box
BIZ 230 025
6
6
3.3
34.5
50
BIZ 230 026
10
6
4.2
34.5
50
BIZ 230 027
10
8
4.2
38.5
50
BIZ 230 028
16
6
5.3
38.5
50
BIZ 230 029
16
8
5.3
42.5
50
BIZ 230 030
25
6
6.6
40
50
BIZ 230 031
25
8
6.6
44
50
BIZ 230 032
25
10
6.6
49
50
BIZ 230 033
35
8
7.9
45
25
BIZ 230 034
35
10
7.9
50
25
BIZ 230 035
50
8
9.2
50.5
25
BIZ 230 036
50
10
9.2
55.5
25
BIZ 230 037
70
10
11
59
10
BIZ 230 038
95
10
13.1
65
10
BIZ 230 039
95
12
13.1
73
10
BIZ 230 040
120
12
14.5
76
5
BIZ 230 041
150
12
12.8
85.5
5
BIZ 230 042
185
12
12.8
91.5
4
BIZ 230 043
240
14
12.8
93.5
2
BIZ 230 044
300
14
14.5
104
2
IEC 61238-1
Reference
Section (mm²)
Screw Ø (mm)
Ø T (mm)
Ø I (mm)
L (mm)
A (mm)
C1 (mm)
C2 (mm)
Quantity per box
BIZ 000 100
1.5
4
4.3
1.8
18
8.7
5
4
100
BIZ 000 120
10
6
6.4
4.7
27
11.9
7
6
100
BIZ 000 200
120
12
13
15.6
63
28.9
14
12
10
BIZ 000 205
120
14
14.5
15.6
67
28.9
16
14
10
BIZ 000 210
120
16
16.5
15.6
71
28.9
17
16
10
BIZ 000 215
150
12
13
16.5
75
30.4
16
14
10
BIZ 000 220
150
14
14.5
16.5
79
30.4
18
16
10
BIZ 000 225
150
16
16.5
16.5
79
30.4
18
16
10
BIZ 000 140
16
10
10.5
5.6
34.5
18
10
9
100
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
53
Reference
Section (mm²)
Screw Ø (mm)
Ø T (mm)
Ø I (mm)
L (mm)
A (mm)
C1 (mm)
C2 (mm)
Quantity per box
BIZ 000 130
16
6
6.4
5.6
28.5
11.9
7
6
100
BIZ 000 135
16
8
8.3
5.6
31
15
8
7.5
100
BIZ 000 230
185
12
13
18.8
80
34
16
14
10
BIZ 000 235
185
16
16.5
18.8
85
34
18
17
10
BIZ 000 105
2.5
4
4.3
2.7
18
8.7
5
4
100
BIZ 000 240
240
12
13
21.2
86
38.4
16
14
5
BIZ 000 245
240
16
16.5
21.2
91
38.4
18
17
5
BIZ 000 150
25
10
10.5
7.1
39
18
11
10
50
BIZ 000 145
25
8
8.3
7.1
34
15
8.5
7.5
50
BIZ 000 250
300
16
16.5
23.4
100
41.7
19
18
5
BIZ 000 160
35
10
10.5
8.7
42
19
11
10
50
BIZ 000 155
35
8
8.3
8.7
38
15.7
9
8
50
BIZ 000 110
4
6
6.4
3.3
23
11
6
5.5
100
BIZ 000 165
50
10
10.5
9.8
47
20
11
10
20
BIZ 000 170
50
12
13
9.8
51
21
13
12
20
100
BIZ 000 115
6
6
6.4
3.8
24
10.3
6
5.5
BIZ 000 175
70
10
10.5
11.5
51
21.5
11
10
20
BIZ 000 180
70
12
13
11.5
53
21.5
12
11
20
BIZ 000 185
95
10
10.5
13.5
55
24.7
11
11
20
BIZ 000 190
95
12
13
13.5
57
24.7
12
12
20
BIZ 000 195
95
16
16.5
13.5
64
27
16
15
20
BIZ 000 125
10
8
8.3
4.7
30
15
8
8
100
COPPER TERMINAL SLEEVES
Reference
54
Section (mm²)
Ø I (mm)
L (mm)
Quantity per box
BIZ 000 400
1.5
1.8
15
100
BIZ 000 405
2.5
2.7
15
100
BIZ 000 410
4
3.3
22
100
BIZ 000 415
6
3.8
22
100
BIZ 000 420
10
4.7
25
100
BIZ 000 425
16
5.6
27
100
BIZ 000 430
25
7.1
29
50
BIZ 000 435
35
8.7
33
50
BIZ 000 440
50
9.8
35
20
BIZ 000 445
70
11.5
39
20
BIZ 000 450
95
13.5
43
20
BIZ 000 455
120
15.6
47
10
BIZ 000 460
150
16.5
58
10
BIZ 000 465
185
18.9
64
10
BIZ 000 470
240
21.2
75
5
BIZ 000 475
300
23.4
90
5
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CRIMPING PLIERS FOR COPPER TERMINAL LUGS AND SLEEVES
LIFE
TIME
GUARANTEE
Hexagonal crimping. Complies with NFC 20-130 (LCIE test report available on request).
Not suitable for crimping aluminium parts.
Jaw material: carbon steel chrome.
Handles material: plastic coated.
Reference
Applications
Section (mm²)
Length (mm)
BIZ 700 012
Copper terminals lugs and sleeves
6/10/16/25/35/50
520
2
BIZ 700 013
6/10/16/25/35/50/70/95/120
660
3.5
ACCESSORY
(kg)
SET OF 2 SPARE DIES FOR COPPER TERMINAL LUGS AND SLEEVES
Supplied in pairs.
Dies material: carbon steel chrome finish.
Reference
Applications
Section (mm²)
BIZ 700 273
For crimping pliers BIZ 700 012
6/10/16/25/35/50
BIZ 700 274
6/10/16/25/35/50/70/95/120
CABLE GLANDS AND ACCESSORIES
PG THREAD PLASTIC CABLE GLANDS
Anti-vibration cap.
Material: polyamide 6.
Neoprene sealing ring for IP68 rating, 5 bars (50 m) 30 minutes.
Base-mounted hexagonal lock nut in polyamide 6 reinforced with fiberglass.
Glow wire test: 750 °C UL 94 V2 30 seconds.
Peak temperature: +150 °C.
Colour: light grey RAL 7035.

Manufactured to DIN EN 50262 (ISO thread) and UTE C 68-311/DIN 40430
IP 68
BIZ 205 009
PG 9
Minimum cable Ø
(mm)
4
BIZ 205 011
PG 11
5
10
2.5
22
19.1
0.752
10
BIZ 205 013
PG 13,5
6
12
2.5
24
20.9
0.823
10
Reference
Thread type
Maximum cable Ø
(mm)
8
Tightening torque
(Nm)
2.5
Spanner
(mm)
19
Recommended punch
size* (mm)
15.7
Recommended punch
size* (inches)
0.618
Quantity
10
* Indicative values shown (greater than thread Ø to facilitate installation without damaging parts).
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
»
Halogen free.
55
PG THREAD PLASTIC CABLE GLANDS
BIZ 205 016
PG 16
Minimum cable Ø
(mm)
10
BIZ 205 021
PG 21
13
18
5
33
BIZ 206 007
PG 7
3
6.5
1.7
15
13
0.512
BIZ 206 009
PG 9
4
8
2.5
19
15.7
0.618
1
BIZ 206 011
PG 11
5
10
2.5
22
19.1
0.752
1
BIZ 206 013
PG 13,5
6
12
2.5
24
20.9
0.823
1
BIZ 206 016
PG 16
10
14
3.3
27
23
0.906
1
BIZ 206 021
PG 21
13
18
5
33
28.8
1.134
1
BIZ 206 029
PG 29
18
25
5
42
37.5
1.476
1
BIZ 206 036
PG 36
22
32
12
53
47.5
1.870
1
BIZ 206 042
PG 42
30
38
12
60
54.5
2.146
1
BIZ 206 048
PG 48
34
44
12
65
60.5
2.382
1
22
Recommended punch
size* (mm)
16.5
Recommended punch
size* (inches)
0.650
Reference
Thread type
Maximum cable Ø
(mm)
14
Tightening torque
(Nm)
3.3
Spanner
(mm)
27
Recommended punch
size* (mm)
23
Recommended punch
size* (inches)
0.906
28.8
1.134
5
1
Quantity
5
ISO/METRIC THREAD PLASTIC CABLE GLANDS
Anti-vibration cap.
Neoprene sealing ring for IP68 rating, 5 bars (50 m) for 30 minutes.
Base-mounted hexagonal lock nut in polyamide 6 reinforced with fiberglass.
Glow wire test: 750 °C UL 94 V2 30 seconds.
Peak temperature: +150 °C.
Colour: light grey RAL 7035.

»
»
Halogen free.
Manufactured to DIN EN 50262 (ISO thread) and UTE C 68-311/DIN 40430
IP 68
BIZ 205 116
ISO 16
Minimum cable Ø
(mm)
5
BIZ 205 120
ISO 20
6
12
2.5
24
20.5
0.807
10
BIZ 205 125
ISO 25
13
18
5
33
25.5
1.004
5
BIZ 206 112
ISO 12
3
6.5
1.7
15
12.5
0.492
1
BIZ 206 116
ISO 16
5
10
2.5
22
16.5
0.650
1
BIZ 206 120
ISO 20
6
12
2.5
24
20.5
0.807
1
BIZ 206 125
ISO 25
13
18
5
33
25.5
1.004
1
BIZ 206 132
ISO 32
18
25
12
42
32.5
1.280
1
BIZ 206 140
ISO 40
22
32
12
53
40.5
1.594
1
BIZ 206 150
ISO 50
30
38
12
60
50.5
1.988
1
BIZ 206 163
ISO 63
34
44
12
65
63.5
2.500
1
Reference
Thread type
Maximum cable Ø
(mm)
10
Tightening torque
(Nm)
2.5
Spanner (mm)
Quantity
10
PG BLIND-STOPS + LOCKNUTS
The blind-stop is fitted in place of the gland in changing installations.
RAL 7035 threaded grey polyamide 6.
Sealing ring provides IP68 protection (IP54 if the seal is not fitted).
Each blind-stop is supplied with a corresponding locknut.

Ensures IP68 protection (blind-stop + sealing ring + locknut).
Reference
BIZ 207 007
Thread type
Quantity per bag
PG 7
100
* Indicative values shown (greater than thread Ø to facilitate installation without damaging parts).
56
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
PG BLIND-STOPS + LOCKNUTS
Reference
Thread type
Quantity per bag
BIZ 207 009
PG 9
100
BIZ 207 011
PG 11
100
BIZ 207 013
PG 13,5
100
BIZ 207 016
PG 16
50
BIZ 207 021
PG 21
25
BIZ 207 029
PG 29
10
BIZ 207 036
PG 36
10
ISO/METRIC BLIND-STOPS + LOCKNUTS
The blind-stop is fitted in place of the gland in changing installations.
RAL 7035 threaded grey polyamide 6.
Sealing ring provides IP68 protection (IP54 if the seal is not fitted).
Each blind-stop is supplied with a corresponding locknut.

Ensures IP68 protection (blind-stop + sealing ring + locknut).
Reference
Thread type
Quantity per bag
BIZ 207 112
ISO 12
100
BIZ 207 116
ISO 16
100
BIZ 207 120
ISO 20
100
BIZ 207 125
ISO 25
25
BIZ 207 132
ISO 32
10
BIZ 207 140
ISO 40
10
PROTECTION TABS FOR PLASTIC GLANDS
The cap is screwed on to the cable gland body in the normal way, providing IP68 sealing of
the installation while awaiting cabling.
Colour: Black RAL 9005.
Quickly and easily secures an installation awaiting cabling.
Reference
Thread type
Quantity per bag
BIZ 209 007
PG 7
100
BIZ 209 009
PG 9
100
BIZ 209 112
ISO 12
100
BIZ 209 011
PG 11/ISO 16
100
BIZ 209 013
PG 13,5/ISO 20
100
BIZ 209 016
PG 16
50
BIZ 209 021
PG 21/ISO 25
25
BIZ 209 029
PG 29/ISO 32
10
BIZ 209 036
PG 36/ISO 40
10
BIZ 209 042
PG 42/ISO 50
1
BIZ 209 048
PG 48/ISO 63
1
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

57
HEAT-SHRINK TUBING
Description:
• Adhesive-free thin wall tubing:
Enables the covering of items of similar and greatly differing Ø.
• Thick wall tubing with adhesive:
Specific applications (example: underground installations, reestablishing cable insulation, electrical connection insulation, shrouding
busbars).
Applications:
For general and specific applications in the following areas:
electrical insulation, marking and identification, protection (mechanical against corrosion), management and maintenance of wires.
For wires and cables from 1.5 to 39 mm Ø before shrinking.
Technical details:
Thin wall, 3/1 shrinkage in length of 1 metre.
Heat-shrink tubing in flexible flameretardant reticulated polyolefin.
Marking of the Bizline reference on each item.
• 3/1 and 2/1 shrinkage without adhesive:
Self-extinguishing in accordance with UL224.
Shrinking temperature: > 110 °C .
Operating temperature: -55 °C to +125 °C (continuous).
Classification: SAE-AMS-DTL-23053/5 Class 1, UL-224 125 °C 600 V, VDE certificate, IEC 60684-3-212 type C.
Conforms to European directives 2002/95/EC (RoHS), 2002/96/EC (WEEE) and 2003/11/E.
• 3/1 shrinkage with adhesive:
Self-extinguishing in accordance with IEC 60684-2-26.
Shrinking temperature: > 130 °C.
Operating temperature: -55 °C to +130 °C (continuous).
Classification SAE-AMS-DTL- 23056/15 Class 1, IEC 60684-3-214, sealing in accordance with VDE 0278 P3.
3/1 HEAT-SHRINK TUBING WITHOUT ADHESIVE
Thin wall, 3/1 shrinkage in length of 1 meter.
For 1.5 to 39 mm Ø cables before shrinking.

Reference marked on each heat-shrink tube for quick identiﬁcation.
Reference
58
Colour of Sleeve
Wall Ø before shrinking (mm)
Wall Ø after shrinking (mm)
Wall thickness after free shrinking (mm)
BIZ 215 001
Black
1.5
0.5
0.45
BIZ 215 002
Black
3
1
0.55
BIZ 215 003
Black
6
2
0.70
BIZ 215 004
Black
9
3
0.70
BIZ 215 005
Black
12
4
0.70
BIZ 215 006
Black
18
6
0.80
BIZ 215 007
Black
24
8
1.00
BIZ 215 008
Black
39
13
1.15
BIZ 215 011
Green/yellow
1.5
0.5
0.45
BIZ 215 012
Green/yellow
3
1
0.55
BIZ 215 013
Green/yellow
6
2
0.70
BIZ 215 014
Green/yellow
9
3
0.70
BIZ 215 015
Green/yellow
12
4
0.70
BIZ 215 016
Green/yellow
18
6
0.80
BIZ 215 017
Green/yellow
24
8
1.00
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HEAT-SHRINK TUBING
Reference
Colour of Sleeve
BIZ 215 018
Green/yellow
39
13
1.15
BIZ 215 021
Blue
1.5
0.5
0.45
BIZ 215 022
Blue
3
1
0.55
BIZ 215 023
Blue
6
2
0.70
BIZ 215 024
Blue
9
3
0.70
BIZ 215 025
Blue
12
4
0.70
BIZ 215 026
Blue
18
6
0.80
BIZ 215 027
Blue
24
8
1.00
BIZ 215 028
Blue
39
13
1.15
BIZ 215 031
Transparent
1.5
0.5
0.45
BIZ 215 032
Transparent
3
1
0.55
BIZ 215 033
Transparent
6
2
0.70
BIZ 215 034
Transparent
9
3
0.70
BIZ 215 035
Transparent
12
4
0.70
BIZ 215 036
Transparent
18
6
0.80
BIZ 215 037
Transparent
24
8
1.00
BIZ 215 038
Transparent
39
13
1.15
BIZ 215 041
Red
1.5
0.5
0.45
BIZ 215 042
Red
3
1
0.55
BIZ 215 043
Red
6
2
0.70
BIZ 215 044
Red
9
3
0.70
BIZ 215 045
Red
12
4
0.70
BIZ 215 046
Red
18
6
0.80
BIZ 215 047
Red
24
8
1.00
BIZ 215 048
Red
39
13
1.15
DISPENSER FOR 3/1 HEAT-SHRINK TUBING WITHOUT ADHESIVE
Thin wall 3/1 heat-shrink in cardboard dispenser.
For wires and cables from 3 to 24 mm Ø before shrinking.
Optimum protection of the heat-shrink.
Easy storage.
Colour of Sleeve
BIZ 217 001
Black
3
1
Wall thickness after free shrinking
(mm)
0.55
BIZ 217 002
Black
6
2
0.70
10
BIZ 217 003
Black
9
3
0.70
8
BIZ 217 004
Black
12
4
0.70
6
BIZ 217 005
Black
18
6
0.80
5
BIZ 217 006
Black
24
8
1.00
4
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
Quantity per box (m)
12
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

59
HEAT-SHRINK TUBING
THICK WALL 3/1 HEAT-SHRINK TUBING WITH ADHESIVE
Thick wall, 3/1 shrinking in length of 1 meter.
For wires and cables from 12 to 85 mm Ø before shrinking.
Shrinking temperature: > 130 °C.
»
»
Self-extinguishing in accordance with IEC -60684-2-26.
Classiﬁcation SAE-AMS-DTL23056/15 Class 1, IEC 60684-3-214, sealing in accordance with VDE 0278 P3
Reference
Colour of Sleeve
BIZ 218 001
Black
12
3
2.3
BIZ 218 002
Black
19
6
3.3
BIZ 218 003
Black
30
8
4.8
BIZ 218 004
Black
38
12
4.6
BIZ 218 005
Black
48
15
4.8
BIZ 218 006
Black
65
16
4.8
BIZ 218 007
Black
85
26
4.8
BOX OF BLACK 3/1 HEAT-SHRINK SLEEVES
Case with 210 sleeves.
For wires and cables from 1,5 to 18 mm Ø before shrinking.
Thin wall, 3/1 shrinking.
Material: reticled polyolefin.

Saves space.
Optimum selection.
Length of sleeve (mm)
Colour
Quantity
1,5
1,5
3
3
6
6
9
9
12
18
0,5
0,5
1
1
2
2
3
3
4
6
35
35
35
35
35
35
35
35
80
80
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
50
50
25
25
15
15
10
10
5
5
BIZ 219 001
Reference
BOX OF COLOURED 3/1 HEAT-SHRINK SLEEVES
Total length: 24.8 m/432 sleeves.
For wires and cables from 1,5 to 24 mm Ø before shrinking.
Thin wall, 3/1 shrinking.
Total length: 24.8 m.

Easy storage.
Optimum protection.
Length of sleeve (mm)
Quantity/Colour
1,5
1,5
3
3
3
3
6
6
6
12
12
12
12
24
0,5
0,5
1
1
1
1
2
2
2
4
4
4
4
8
40
40
50
50
40
40
60
50
60
100
100
100
170
250
25 x black / 25 x brown
50 x green-yellow
40 x black / 40 x transparent
50 x green-yellow
50 x blue
25 x red / 25 x brown
10 x black / 10 x transparent
5 x green-yellow / 5 x transparent
10 x red / 10 x blue
10 x black
10 x transparent
5 x green-yellow / 5 x brown
7 x blue / 7 x red
8 x black
Reference
60
BIZ 219 002
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HEAT-SHRINK TUBING
Thin wall, 2/1 shrinkage in length of 1 meter.
For wires and cables from 50,8 to 101.6 mm Ø before shrinking.
Reference
Colour of Sleeve
BIZ 216 001
Black
50.8
25.4
1.14
BIZ 216 002
Black
76.2
38.1
1.27
BIZ 216 003
Black
101.6
50.8
1.40
BIZ 216 021
Blue
50.8
25.4
1.14
BIZ 216 022
Blue
76.2
38.1
1.27
BIZ 216 023
Blue
101.6
50.8
1.40
BIZ 216 031
Transparent
50.8
25.4
1.14
BIZ 216 032
Transparent
76.2
38.1
1.27
BIZ 216 033
Transparent
101.6
50.8
1.40
BIZ 216 041
Red
50.8
25.4
1.14
BIZ 216 042
Red
76.2
38.1
1.27
BIZ 216 043
Red
101.6
50.8
1.40
Number of strands
BRAIDED SLEEVING
Colour: black.
Continuous temperature in use: +140 °C.
Peak temperature in use: +160 °C.
Min. operating temperature: -30 °C.
Self-extinguishing to UL94V2.
Aggressiveness of released gases (standard UTE C-20453): less than 20.
Density: 1.14.
Rate of humidity take-up at 23 °C and 50 % relative humidity: 2.3 %.
Strand Ø: 0.26 mm.
Packed in a carton of 25 m.
Halogen free.
Optimum working ﬂexibility and minimum shape memory.
End of reel indication 2 m from the end.
Reference
Ø Minimum (mm)
Nominal Ø (mm)
maximum Ø (mm)
BIZ 210 010
8
10
14
144
BIZ 210 012
10
12
16
160
BIZ 210 016
14
16
20
200
BIZ 210 020
16
20
25
264
BIZ 210 030
25
30
35
288
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

61
RIBBED SLEEVES
To protect, hold and organise cables.
Material: polyethylene.

Halogen free.
Reference
Colour
Ø (mm)
Compatible wire Ø (mm)
Width (mm)
Thickness (mm)
Length (m)
Quantity
BIZ 210 108
Black
8
6-30
12
0.75
10
Plastic bag
BIZ 210 115
Black
15
12-35
15.5
1
10
Plastic bag
BIZ 210 120
Black
19
15-50
19.2
1.2
10
Plastic bag
BIZ 210 125
Black
24
20-100
21.5
1.3
10
Plastic bag
BIZ 210 208
White
8
6-30
12
0.75
10
Plastic bag
BIZ 210 215
White
15
12-35
15.5
1
10
Plastic bag
BIZ 210 220
White
19
15-50
19.2
1.2
10
Plastic bag
BIZ 210 225
White
24
20-100
21.5
1.3
10
Plastic bag
DIN RAILS
1- ASSYMETRIC RAILS:
For the click or screw fixing of terminal blocks or devices
with the aid of accessories.
2- SYMETRIC RAILS:
For the click fixing of any modular device without
accessories (terminals, circuit breakers, etc.).
Height 7.5 mm: used for fixing lightweight devices
(domestic, offices, industry).
Height 15 mm: used for fixing heavier devices and/or
when there are greater distances between attachment
points.
Salt spray resistance: 96 hours minimum.
»
European directive 2002/96/EC (RoHS)
Reference
62
Type
Width (mm)
Height (mm)
Length (m)
Thickness (mm)
BIZ 200 210
Solid symmetrical
35
15
2
1.5
BIZ 200 215
Solid symmetrical
35
7.5
2
1
BIZ 200 225
Solid asymmetrical
32
15
2
1.5
BIZ 200 235
Perforated symmetrical
35
15
2
1.5
BIZ 200 240
Perforated symmetrical
35
7.5
2
1
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
63
HARDWARE
64
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
SCREWS
P.66
NUTS AND BOLTS
P.71
STAINLESS STEEL SCREWS,
NUTS AND BOLTS
P.73
PLUGS
P.75
SUPPORTING SYSTEMS
P.82
CABLE TRAY FASTENERS
AND FIXINGS
P.90
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
65
HARDWARE
SCREWS
CHIPBOARD SCREWS
TORX® CHIPBOARD SCREWS
Production fixing in wood.
Bichromate-coated steel.

Stronger tightening torque.
Reference
Head type
Ø (mm)
Length (mm)
Threaded length (mm)
Quantity per box
Packaging type
BIZ 710 630
Countersunk
3
20
Full
300
Plastic box
BIZ 710 631
Countersunk
3
25
Full
300
Plastic box
BIZ 710 632
Countersunk
4
20
Full
200
Plastic box
BIZ 710 633
Countersunk
4
25
Full
200
Plastic box
BIZ 710 634
Countersunk
4
30
Full
200
Plastic box
BIZ 710 635
Countersunk
4
35
Full
150
Plastic box
BIZ 710 636
Countersunk
4
40
Full
150
Plastic box
BIZ 710 637
Countersunk
5
30
Full
100
Plastic box
BIZ 710 638
Countersunk
5
35
Full
100
Plastic box
BIZ 710 639
Countersunk
5
40
Full
100
Plastic box
BIZ 710 640
Countersunk
5
50
Full
100
Plastic box
BIZ 710 641
Countersunk
6
40
Full
100
Plastic box
BIZ 710 642
Countersunk
6
50
Full
100
Plastic box
BIZ 710 643
Countersunk
6
60
Full
80
Plastic box
BIZ 710 644
Countersunk
6
80
Partial 50
60
Plastic box
BIZ 710 645
Countersunk
6
100
Partial 60
50
Plastic box
POZIDRIV CHIPBOARD SCREWS
Reference
66
Head type
Ø (mm)
Length (mm)
Quantity per box
Packaging type
BIZ 710 010
Countersunk
3
20
Full
300
Plastic box
BIZ 710 011
Countersunk
3
25
Full
300
Plastic box
BIZ 710 001
Countersunk
4
20
Full
200
Plastic box
BIZ 710 002
Countersunk
4
25
Full
200
Plastic box
BIZ 710 003
Countersunk
4
30
Full
200
Plastic box
BIZ 710 004
Countersunk
4
35
Full
150
Plastic box
BIZ 710 005
Countersunk
4
40
Full
150
Plastic box
BIZ 710 006
Countersunk
5
30
Full
100
Plastic box
BIZ 710 007
Countersunk
5
35
Full
100
Plastic box
BIZ 710 008
Countersunk
5
40
Full
100
Plastic box
BIZ 710 009
Countersunk
5
50
Full
100
Plastic box
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
SCREWS
CHIPBOARD SCREWS
Reference
Head type
Ø (mm)
Length (mm)
Quantity per box
Packaging type
BIZ 710 012
Countersunk
6
40
Full
100
Plastic box
BIZ 710 013
Countersunk
6
50
Full
100
Plastic box
BIZ 710 014
Countersunk
6
60
Full
80
Plastic box
BIZ 710 016
Countersunk
6
80
Partial 50
60
Plastic box
BIZ 710 015
Countersunk
6
100
Partial 60
50
Plastic box
BIZ 720 001
Countersunk
3
20
Full
1000
Pouring spout carton box
BIZ 720 002
Countersunk
3
25
Full
1000
BIZ 720 003
Countersunk
4
20
Full
1000
BIZ 720 004
Countersunk
4
25
Full
1000
BIZ 720 005
Countersunk
4
30
Full
1000
BIZ 720 006
Countersunk
4
35
Full
1000
BIZ 720 007
Countersunk
4
40
Full
750
BIZ 720 808
Countersunk
4
45
Full
500
BIZ 720 809
Countersunk
4
50
Full
500
BIZ 720 810
Countersunk
4
60
Partial 40
500
BIZ 720 008
Countersunk
5
30
Full
800
BIZ 720 009
Countersunk
5
35
Full
700
BIZ 720 010
Countersunk
5
40
Full
600
BIZ 720 011
Countersunk
5
50
Full
500
BIZ 720 815
Countersunk
5
60
Partial 40
200
BIZ 720 816
Countersunk
5
70
Partial 50
200
BIZ 720 817
Countersunk
5
80
Partial 50
200
BIZ 720 012
Countersunk
6
40
Full
400
BIZ 720 013
Countersunk
6
50
Full
350
BIZ 720 014
Countersunk
6
60
Full
200
BIZ 720 821
Countersunk
6
70
Partial 45
150
BIZ 720 015
Countersunk
6
80
Full
150
BIZ 720 016
Countersunk
6
100
Full
150
DRYWALL SCREWS
Phosphate-coated steel.

EN 14566 + A1
Reference
Head type
Ø (mm)
Length (mm)
Quantity per box
Packaging type
BIZ 710 030
Countersunk
3.5
25
200
Plastic box
BIZ 710 031
Countersunk
3.5
35
200
Plastic box
BIZ 720 030
Countersunk
3.5
25
1000
Carton box
BIZ 720 031
Countersunk
3.5
35
1000
Carton box
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
Slotted head for better embedding and burying.
Sharp point requiring no pre-drilling of wood or steel proﬁles for the easier installation
of plasterboard.
Machine or manual insertion.
67
HARDWARE
SCREWS
COACH SCREWS
Ideal for assembly work, structures and wood joinery.
Zinc-plated steel.

»
Hexagonal head for applying maximum torque.
DIN 571
Reference
Ø (mm)
Length (mm)
Quantity per box
Packaging type
BIZ 710 070
6
30
40
Plastic box
BIZ 710 071
6
40
40
Plastic box
BIZ 710 072
6
50
40
Plastic box
BIZ 710 073
8
40
25
Plastic box
BIZ 710 074
8
60
20
Plastic box
BIZ 720 071
6
40
200
BIZ 720 072
6
50
200
BIZ 720 073
8
40
200
BIZ 720 074
8
60
100
BIZ 720 075
10
80
50
BIZ 720 076
10
100
50
NAILS
Head in hardened steel.

Very resistant.
Reference
Ø (mm)
Length (mm)
Quantity per box
Packaging type
BIZ 710 270
1.5
25
1000 approx.
Plastic box
BIZ 710 271
2
35
450 approx.
Plastic box
SELF-DRILLING METAL SCREWS
PH2 PAN HEAD SELF-DRILLING METAL SHEET SCREWS
For fixing thin mechanical parts to light metal structures.
Rapid insertion in production situations (cladding) using an electric driver.
5 μ zinc-plated steel.

»
The screw’s drill-shaped tip makes pre-drilling unnecessary in steel up to 6 mm thick.
DIN 7504O
Reference
68
Head type
Ø (mm)
Length (mm)
Quantity per box
BIZ 710 018
Pan
3.5
9.5
200
Plastic box
BIZ 710 019
Pan
3.5
13
200
Plastic box
BIZ 710 025
Pan
3.5
19
200
Plastic box
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Packaging type
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
SCREWS
Reference
Head type
Ø (mm)
Length (mm)
Quantity per box
BIZ 710 020
Pan
4.2
13
200
Packaging type
Plastic box
BIZ 710 021
Pan
4.2
16
200
Plastic box
BIZ 710 023
Pan
4.8
16
200
Plastic box
BIZ 710 022
Pan
4.8
19
200
Plastic box
BIZ 710 024
Pan
4.8
25
200
Plastic box
BIZ 720 020
Pan
4.2
13
500
BIZ 720 021
Pan
4.2
16
500
BIZ 720 023
Pan
4.8
16
500
BIZ 720 022
Pan
4.8
19
500
BIZ 720 024
Pan
4.8
25
500
PH2 COUNTERSUNK HEAD SELF-DRILLING METAL SHEET SCREWS

»
Special for assembling wood on steel. DIN 7504O
Reference
Head type
Ø (mm)
Length (mm)
Quantity per plastic box
BIZ 710 600
Countersunk
3.5
16
200
BIZ 710 601
Countersunk
3.9
16
200
BIZ 710 602
Countersunk
3.9
19
200
BIZ 710 603
Countersunk
3.9
25
200
BIZ 710 604
Countersunk
4.2
19
200
BIZ 710 605
Countersunk
4.2
25
200
BIZ 710 606
Countersunk
4.2
32
200
BIZ 710 607
Countersunk
4.8
25
200
BIZ 710 608
Countersunk
4.8
38
200
TORX® DRIVE SELF-DRILLING METAL SHEET SCREWS

»
High tightening torque without damaging either the tool or the screw. DIN 7504M
Reference
Head type
Ø (mm)
Length (mm)
BIZ 710 032
Pan
3.5
13
200
BIZ 710 033
Pan
3.5
19
200
BIZ 710 034
Pan
4.2
13
200
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Supplied with 1 bit.
69
HARDWARE
SCREWS
Reference
Head type
Ø (mm)
Length (mm)
BIZ 710 035
Pan
4.2
16
200
BIZ 710 036
Pan
4.8
16
200
BIZ 710 037
Pan
4.8
19
200
BIZ 710 038
Pan
4.8
25
200
NO.2 SQUARE-DRIVE SELF-DRILLING METAL SHEET SCREWS
Supplied with a 2/25 bit.

»
DIN 7504M
Reference
Head type
Ø (mm)
Length (mm)
BIZ 710 618
Pan
3.5
9.5
200
BIZ 710 619
Pan
3.5
13
200
BIZ 710 620
Pan
4.2
13
200
BIZ 710 621
Pan
4.2
16
200
BIZ 710 622
Pan
4.8
16
200
BIZ 710 623
Pan
4.8
19
200
BIZ 710 624
Pan
4.8
25
200
HEXAGONAL HEAD SELF-DRILLING METAL SHEET SCREWS WITH COLLAR

»
70
DIN 7504K
Reference
Head type
Ø (mm)
Length (mm)
Washer Ø (mm)
BIZ 710 026
Hexagonal
4.2
16
8.8
200
BIZ 710 027
Hexagonal
4.8
16
10.5
200
BIZ 710 028
Hexagonal
4.8
19
10.5
200
BIZ 710 029
Hexagonal
6.3
25
13.5
200
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
NUTS AND BOLTS
CARRIAGE BOLTS (ROUND HEAD, SQUARE COLLAR)
For fastening and fixing wire mesh cable trays.
Zinc-plated steel.
Square collar:
• Minimum height: 2.4 mm.
• Maximum height: 3 mm.
»
ISO 8678
Reference
Thread type
Length (mm)
BIZ 710 060
M6
12
100
BIZ 710 061
M6
16
100
BIZ 710 062
M6
20
100
BIZ 710 063
M6
30
100
CARRIAGE BOLTS (ROUND HEAD, SHORT SQUARE COLLAR)
For fastening and fixing wire mesh and perforated cable trays.
Zinc-plated steel.
Collar height: 1 mm.
Square collar: 6 x 6 mm.

Short collar: optimum tightening for perforated cable trays.
Reference
BIZ 710 068
Thread type
Length (mm)
M6
20
100
STOVE BOLTS
Ideal for metal on metal and wood on metal fastening.
Zinc-plated steel.
Optimum spread of tightening pressure on steel and aluminum sheets.
Can be tightened with a cross-head screwdriver.
Reference
Thread type
Length (mm)
BIZ 710 064
M6
12
100
BIZ 710 065
M6
16
100
BIZ 710 066
M6
20
100
BIZ 710 067
M6
30
100
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

71
HARDWARE
NUTS AND BOLTS
HEXAGONAL HEAD SET SCREWS
For metal on metal and wood on metal fastening.
In 4.6 zinc-plated steel.
Fully threaded. Reference
Thread type
Length (mm)
BIZ 710 040
M4
20
100
BIZ 710 041
M4
30
100
BIZ 710 042
M4
40
100
BIZ 710 043
M5
30
80
BIZ 710 044
M5
40
50
BIZ 710 045
M6
40
50
BIZ 710 046
M6
60
50
BIZ 710 047
M8
40
40
BIZ 710 048
M8
60
20
BIZ 710 049
M10
40
20
BIZ 710 039
M12
60
20
WIDE FLAT WASHERS
»
ISO 7093
Reference
Inside Ø (mm)
Outside Ø (mm)
Thickness (mm)
6
18
1.2
100
BIZ 710 166
EXTRA WIDE FLAT WASHERS
Enables the part being fixed to adapt better to the diameter of the screw.
»
ISO 7094
Reference
72
Inside Ø (mm)
Outside Ø (mm)
Thickness (mm)
Quantity per box
Packaging type
BIZ 710 160
4
16
0.8
200
Plastic box
BIZ 710 161
5
20
1
200
Plastic box
BIZ 710 162
6
25
1.2
100
Plastic box
BIZ 710 163
8
30
1.5
50
Plastic box
BIZ 710 164
10
36
2
50
Plastic box
BIZ 710 165
12
40
2.5
30
Plastic box
BIZ 720 160
4
16
0.8
500
BIZ 720 161
5
20
1
500
BIZ 720 162
6
25
1.2
200
BIZ 720 163
8
30
1.5
100
BIZ 720 164
10
36
2
100
BIZ 720 165
12
40
2.5
100
BIZ 720 166
14
45
2.5
100
BIZ 720 167
16
50
3
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
NUTS AND BOLTS
HEXAGONAL NUTS
»
DIN 934/EN 6923
Reference
Thread type
Quantity per box
Packaging type
BIZ 710 050
M4
200
Plastic box
BIZ 710 051
M5
200
Plastic box
BIZ 710 052
M6
100
Plastic box
BIZ 710 054
M6 serrated flange nut
100
Plastic box
BIZ 710 053
M8
100
Plastic box
BIZ 710 055
M10
50
Plastic box
BIZ 710 056
M12
30
Plastic box
BIZ 720 050
M4
500
BIZ 720 051
M5
500
BIZ 720 052
M6
500
BIZ 720 053
M8
200
BIZ 720 055
M10
100
BIZ 720 056
M12
50
BIZ 720 057
M14
50
BIZ 720 058
M16
25
STAINLESS STEEL SCREWS, NUTS AND BOLTS
STAINLESS STEEL POZIDRIV CHIPBOARD SCREWS
Reference
Head type
Ø (mm)
Length (mm)
BIZ 710 490
Countersunk
3
20
200
BIZ 710 491
Countersunk
3
25
200
BIZ 710 492
Countersunk
4
20
200
BIZ 710 493
Countersunk
4
25
200
BIZ 710 494
Countersunk
4
30
200
BIZ 710 495
Countersunk
4
35
200
BIZ 710 496
Countersunk
4
40
200
BIZ 710 497
Countersunk
5
30
200
BIZ 710 498
Countersunk
5
35
200
BIZ 710 499
Countersunk
5
40
200
BIZ 710 500
Countersunk
5
50
200
BIZ 710 501
Countersunk
6
40
100
BIZ 710 503
Countersunk
6
50
100
BIZ 710 504
Countersunk
6
100
100
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Fully threaded.
A2 stainless steel.
73
HARDWARE
STAINLESS STEEL COACH SCREWS
Ideal for assembly work, structures and wood joinery.
A2 stainless steel.

Hexagonal head for applying maximum torque.
Reference
Ø (mm)
Length (mm)
BIZ 710 510
6
30
200
BIZ 710 511
6
40
200
BIZ 710 512
6
50
200
BIZ 710 513
8
40
100
BIZ 710 514
8
60
100
STAINLESS STEEL CARRIAGE BOLTS (ROUND HEAD, SQUARE COLLAR)
A2 stainless steel.
Short square collar:
• Maximum height: 2.3 mm.
Supplied without nut.

»
High resistance to corrosion.
DIN 603
Reference
Thread type
Length (mm)
BIZ 710 530
M6
12
100
BIZ 710 531
M6
16
100
BIZ 710 532
M6
20
100
BIZ 710 533
M6
30
100
STAINLESS STEEL HEXAGONAL HEAD SCREWS
A2 stainless steel.
Fully threaded.
»
DIN 933
Reference
74
Thread type
Length (mm)
BIZ 710 460
M4
20
200
BIZ 710 461
M4
30
200
BIZ 710 462
M4
40
200
BIZ 710 463
M5
30
200
BIZ 710 464
M5
40
200
BIZ 710 465
M6
40
200
BIZ 710 466
M6
60
200
BIZ 710 467
M8
40
100
BIZ 710 468
M8
60
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
STAINLESS STEEL HEXAGONAL NUTS
A2 stainless steel.
»
DIN 934
Reference
Thread type
Notched base
BIZ 710 470
M4
No
200
BIZ 710 471
M5
No
200
BIZ 710 472
M6
No
200
BIZ 710 474
M6
Yes
200
BIZ 710 473
M8
No
200
STAINLESS STEEL EXTRA WIDE FLAT WASHERS
A2 stainless steel.
Reference
Inside Ø (mm)
Outside Ø (mm)
Thickness (mm)
BIZ 710 480
4
16
0.8
200
BIZ 710 481
5
20
1
200
BIZ 710 482
6
24
1.2
200
BIZ 710 483
8
30
1.5
200
PLUGS
ALFA SOLID MATERIAL PLUGS
For light fixing in solid materials (C20/C25 concrete, concrete blocks and solid bricks).
Polyamide 6.
Anti-rotation features prevent spinning in the hole.
Flange provides perfect positioning.
BIZ 710 080
Drilling Ø
(mm)
5
Plug length
(mm)
25
Drilling depth
(mm)
35
Screw Ø
(mm)
3-4
BIZ 710 081
6
30
40
3.5-5
5
BIZ 710 095
7
30
40
4-5.5
BIZ 710 082
8
40
55
4.5-6
Reference
Thickness of the part Tear-out resistance (daN)*
to be fixed (mm)
C20/C25 concrete
2
19
Tear-out resistance
(daN)* brick
18
With flange
250
Plastic box
30
28
With flange
250
Plastic box
5
31
29
With flange
200
Plastic box
5
33
31
With flange
120
Plastic box
Shape
Quantity
Packaging type
BIZ 710 083
10
50
65
6-8
5
50
47
With flange
60
Plastic box
BIZ 710 084
12
60
75
8-10
5
60
55
With flange
35
Plastic box
BIZ 720 081
6
30
40
3.5-5
5
30
28
With flange
1000
Bag
* 1 daN = approx. 1 kg.
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

75
HARDWARE
PLUGS
BIZ 720 082
Drilling Ø
(mm)
8
Plug length
(mm)
40
Drilling depth
(mm)
55
Screw Ø
(mm)
4.5-6
BIZ 710 145
6
30
40
3.5-5
Reference
to be fixed (mm)
C20/C25 concrete
5
33
5
30
Tear-out resistance
(daN)* brick
31
Shape
Quantity
With flange
1000
Bag
31
Without flange
250
Plastic box
Packaging type
BIZ 710 146
7
30
40
4-5.5
5
31
29
Without flange
200
Plastic box
BIZ 710 147
8
40
55
4.5-6
5
33
31
Without flange
120
Plastic box
BIZ 710 148
10
50
65
6-8
5
50
47
Without flange
60
Plastic box
TAURUS SOLID AND HOLLOW MATERIAL PLUGS
For light and medium fixing in solid and hollow materials.
Polyamide 6.
Drilling Ø
(mm)
Plug length
(mm)
BIZ 710 126
5
25
Minimum
drilling depth
(mm)
35
BIZ 710 127
6
30
BIZ 710 128
8
40
BIZ 710 129
10
50
Reference
Screw Ø
(mm)
to be fixed (mm)
C20/C25 concrete
Tear-out resistance
(daN)* brick
Tear-out resistance
(daN)* hollow brick
Quantity per plastic
box
4
2
30
28
18
250
40
4.5-5
5
32
31
26
250
50
5-6
5
38
37
28
120
60
6-8
5
60
58
-
60
UNIVERSAL PLUGS ON STRIPS
For light and medium fixing in all main materials (solid and hollow).
High-density polyethylene.

Clip for ﬁxing to a belt.
Colour coded for quick identiﬁcation of diameter.
BIZ 710 120
Drilling Ø
(mm)
6
Plug length
(mm)
23
BIZ 710 121
8
30
Reference
2/5
Tear-out resistance
(daN)* concrete
30
Tear-out resistance
(daN)* hollow brick
10
Tear-out resistance (daN)*
in 13 mm plasterboard
7
4/7
37
15
9
Screw Ø (mm)
Colour
Quantity
Packaging type
Green
200
Strips
Yellow
150
Strips
UNIK UNIVERSAL PLUGS
For fixing light weight objects in all walls and floors (electrical panels, boxes, detectors,
radiators, lighting, junction boxes, etc.)
Polypropylene.

Expand over entire length for very high resistance in all materials.
Fill in oversized cavities, already used or slightly damaged without altering effectiveness.
Short plug: quick installation.
Drilling Ø
(mm)
Plug length
(mm)
BIZ 710 650
5
24
Minimum
drilling depth
(mm)
34
Yellow
96
Strips
BIZ 710 651
6
28
38
3.5-5
30
24
14
8
Red
96
Strips
BIZ 710 652
7
30
40
4-6
33
25
20
10
Brown
96
Strips
Reference
Screw Ø
(mm)
3-4.5
Tear-out resistance
Tear-out
Tear-out
Tear-out resistance
(daN)* C20/C25 resistance (daN)* resistance (daN)* (daN)* in 13 mm
concrete
brick
hollow brick
plasterboard
25
14
12
7
Colour
Quantity Packaging type
76
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
PLUGS
Drilling Ø
(mm)
Plug length
(mm)
BIZ 710 653
8
32
Minimum
drilling depth
(mm)
42
BIZ 710 654
10
36
46
5-8
65
27
34
BIZ 720 651
6
28
38
3.5-5
30
24
14
8
Blue
500
Bulk
BIZ 720 653
8
32
42
4.5-6
39
27
27
10
Blue
300
Bulk
Reference
Tear-out resistance
Tear-out
Tear-out
Tear-out resistance
(daN)* C20/C25 resistance (daN)* resistance (daN)* (daN)* in 13 mm
concrete
brick
hollow brick
plasterboard
39
27
27
10
Screw Ø
(mm)
4.5-6
13
Colour
Blue
80
Strips
Grey
80
Strips
MX MULTI-MATERIAL PLUGS
For light and medium fixing in all types of materials: solid, hollow, soft and hard (lighting,
TV wall mounts and support systems, radiators, electrical boards, electrical devices, etc.)
Suitable for plasterboard.
Polyamide 6.

4 expansion zones and grooved body: very good grip.
Shape lock: excellent grip in hollow materials.
4 anti-rotation lugs + 2 lugs for easier use in plasterboard.
Egg-shaped tip: easy insertion.
Drilling Ø
(mm)
Plug length
(mm)
BIZ 710 661
6
30
Minimum
drilling depth
(mm)
40
4-5
40
12
25
5**
BIZ 710 662
8
40
50
5-6
50
15
30
9***
60
BIZ 710 663
10
50
60
6-8
70
30
36
9***
40
Reference
Screw Ø
(mm)
Tear-out resistance (daN)* Cellular concrete tear
C20/C25 concrete
resistance (daN)*
Tear-out resistance
(daN)* hollow brick
Tear-out resistance (daN)* Quantity per plastic
in 13 mm plasterboard
box
100
** Maximum thickness 9.5 mm. *** Maximum thickness 12.5 mm. HAMMER PLUGS
Fixing of wiring ducts, cable trays, angles, etc.
Polyamide 6.
Reinforced slotted flange.
Includes pozidriv countersunk screw in 4.8 zinc-plated steel.
Easy hammer ﬁxing.
Reference
Drilling Ø
(mm)
Minimum
Thickness of
Length
drilling depth the part to be
(mm)
(mm)
fixed (mm)
25
35
1
Collar Ø
(mm)
Tear-out resistance
Tear-out resistance
(daN)* 25N/mm
(daN)* brick
concrete
80
80
Shear resistance
(daN)* concrete
25N/mm
90
Shear resistance
(daN)* brick
BIZ 710 114
5
90
200
Plastic box
BIZ 710 115
6
35
45
5
10
100
100
100
100
100
Plastic box
BIZ 710 116
5
36
45
5
9
90
90
100
100
100
Plastic box
BIZ 710 117
6
55
65
25
10
110
100
110
100
80
Plastic box
BIZ 710 118
8
75
85
30
11
160
150
150
150
40
Plastic box
BIZ 710 119**
6
35
45
6
10
100
100
100
100
100
Plastic box
BIZ 710 138
5
25
35
1
9
80
80
90
90
200
Carton box
BIZ 710 139
6
35
45
5
10
100
100
100
100
200
Carton box
9
**Fitted with a hanger screw for the quick ﬁxing of ties, thimbles, pipes, etc.
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

77
HARDWARE
PLUGS
STORM PLUGS
Ideal alternative to a hammer plug.
Polypropylene.
Slotted flange.
Supplied with zinc-plated screws with an innovative head for drill bit.

Very quick to set.
Will not damage the parts being fixed.
Easy fitting, even in confined spaces.
BIZ 710 134
Drilling Ø
(mm)
5
BIZ 710 135
6
Reference
30
Minimum drilling
depth (mm)
35
Thickness of the part to be
fixed (mm)
5
Collar Ø
(mm)
8.60
in concrete 300 kg/mm²
64
Shear resistance
(daN)*
120
Quantity per plastic
box
100
40
45
10
9.55
78
161
100
Length (mm)
MULTI-MATERIAL METAL ANCHORS
Two operating principles: knotting in hollow masonry and expanding in solid materials.
For fixing in hollow or solid blocks, brick + filler, concrete and stone.
Ideal for fixing cable trays, slabs, wire ducts, ladders, AC units, radiators, etc.
With a thread pitch enabling fixing with a chipboard screw if desired.
Supplied with hexagonal head screw 6 x 60 mm.

Fixing in solid or hollow materials.
Reference
BIZ 710 133
concrete
80
Concrete shearing resistance
(daN)*
170
Peel strength (daN)* hollow brick
55
Tear-out resistance (daN)* hollow
brick
110
40
METAL HOLLOW WALL ANCHORS
Screw head suitable for flat or Phillips screwdriver.
Plasticized steel washer and toothed sleeve to prevent the wall plug from rotating during
tightening.
Screws supplied.
Fixing heavy loads in hollow materials.
M4, M5 and M6 plugs: stamped in one piece with detachable folded sleeves to reduce the
risk of breakage.
M8 plugs: welded nuts and sleeves.

Possible to remove the sleeve in the event of error.
Reference
Thread type
Length (mm)
Drilling Ø (mm)
Wall thickness (mm)
Screw head type
BIZ 710 090
M4
32
8
6/16
Round
60
BIZ 710 091
M5
36
10
6/16
Round
40
BIZ 710 097
M5
50
10
6/16
Round
30
BIZ 710 092
M6
36
11
6/16
Round
30
BIZ 710 098
M6
50
11
6/16
Round
25
BIZ 710 099
M8
36
13
6/16
Hexagonal
25
78
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
PLUGS
NAIL ANCHORS
For wiring ducts and mouldings.
Polyamide 6.
Reference
Length (mm)
30
100
BIZ 710 112
SELF-DRILLING SCREWS
For fixing pre-drilled (6 mm) skirtings and wiring ducts.
Polyamide 6.
Reference
Shear resistance (daN)*
5
10
200
BIZ 710 113
SELF-DRILLING MINI-PLUGS
Quick fixing of wiring ducts and mouldings.
Suitable for fixing to plaster type hollow materials.
Safety factor 1:5.
Zamac (zinc/aluminum alloy).

Screw straight in for maximum time saving.
Countersunk head.
May be inserted using power tools.
Reference
Plug length (mm)
BIZ 710 109
26
Tear-out resistance (daN)* in 13 mm
plasterboard
4.5
Shearing resistance (daN)* 12.5 mm
plasterboard
12
200
SELF-DRILLING PLUGS
Reference
BIZ 710 111
Plug length (mm)
Screw dimensions (mm)
35
4.5 x 35
Tear-out resistance (daN)* in 13
mm plasterboard
6
Shearing resistance (daN)* 12.5
mm plasterboard
18
Quantity per box
100
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Fixing in hollow plasterboard partitions.
Safety factor 1:5.
Zamac (zinc/aluminum alloy).
Supplied with panhead Pozidriv screws in bichromate-coated steel.
79
HARDWARE
PLUGS
PLUGS + SCREWS + SCREWDRIVER CASE
Supplied with 1000 V isolated PZ2 Pozidriv screwdriver.
Reference
Quantity
BIZ 710 096
200
TORNADO SELF-DRILLING PLUGS
Expansion self-drilling plugs with retractable cone for guaranteed fixing and high load capacity.
Safety factor 1:5.
Fixes light elements in hollow partitions from 10 to 26 mm or plaster tiles with 8 mm Ø hole
pre-drilled.
Polyamide + glass fiber.
Supplied with 4.5 mm Ø screws.

Time saving.
Resistance to high load.
No damage in the partition.
Reference
BIZ 710 124
Plug length
(mm)
39
Screw Ø
(mm)
4.5
Thickness of the part to
be fixed (mm)
10
Tightening torque
(Nm)
2.2/2.4
Tearing out resistance (daN)*
12.5 mm plasterboard
9
Shearing resistance (daN)*
12.5 mm plasterboard
24
50
ISOBIZ POLYSTYRENE PLUGS
For light suspensions: pipes, tubes or small electrical devices (lights, etc.).
Particularly suited to polystyrene hollow tiles found in crawl spaces, basements or garages.
Polyethylene.
Supplied with screws.

Quick ﬁtting by hand or screwdriver.
Perfect ﬁnish: the head does not protrude.
Versatile: screw or screw tab.
Reference
Screw dimensions (mm)
Length (mm)
4.5 x 35
40
40
BIZ 710 125
80
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
PLUGS
SIMPLE PARTITION FLAT ANCHORS
The ideal solution for fixing light or medium loads to FERMACEL®, AQUAPANEL®,
FIBRALITE® and ISOREL® type plasterboard.
Safety factor 1:2.

Flat plug: no risk of rotation when inserting screw.
Geometry allows the plug to be ﬁtted without damaging the material.
Reference
Tearing out resistance (daN)* 12.5 mm plasterboard
Shearing resistance (daN)* 12.5 mm plasterboard
15
30
100
BIZ 710 130
DOUBLE PARTITION FLAT ANCHORS
Nails in, expands when screw is inserted.
Fixing in double thickness of 13 mm thick plasterboard, cellular concrete and plaster tiles.
Safety factor 1:2.
Zinc-plated steel.
Reference
Tearing out resistance (daN)* 2 x 12.5 mm plasterboard
Shearing resistance (daN)* 2 x 12.5 mm plasterboard
25
70
50
BIZ 710 131
THROUGH BOLT ANCHORS
Heavy fixing in solid materials.
Bolt in zinc-plated steel.
Expansion ring in A2 stainless steel. Technical documentation available on request: Declaration of compliance.
Stainless steel expansion ring for a long life and maximum strength.
Long thread that can make up for drilling errors.
Pre-ﬁtted nuts and washers: saves time.
Anvil end to protect the thread during hammering.
Thread type
Length
(mm)
Drilling Ø
(mm)
Drilling depth
(mm)
BIZ 710 176**
M6
55
6
40
Thickness of the
part to be fixed
(mm)
5
BIZ 710 177**
M8
50
8
45
2
BIZ 710 178
M8
75
8
65
BIZ 710 179
M8
90
8
65
Reference
Tightening torque
(Nm)
Tear-out resistance
(daN)* concrete
Concrete shearing Quantity per plastic
resistance (daN)*
box
30
140
190
10
22
430
440
10
15
45
430
440
10
30
61
430
440
10
** Outside European Technical Approval.
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

81
HARDWARE
PLUGS
ADJUSTABLE TOGGLES T ANCHORS FOR HOLLOW PARTITIONS
Fixing in dry and hollow materials such as blocks, bricks, plasterboards and false ceilings.
Zinc-plated toggle.
Adjustable polypropylene ring.
Toggle length: 50 mm.
Minimum cavity depth: 48 mm.
Minimum length screwed into the toggle: 20 mm.
Safety factor 1:4.

Saves time: quick adjustment of the length.
Reduced storage needs: A single plug for all hollow materials between 10 and 92 mm thick.
Can be completely disassembled.
Screw Ø (mm)
Drilling Ø (mm)
Material thickness
(mm)
BIZ 710 155
5
12
10-92
Tearing out resistance (daN)* 12.5
mm plasterboard
13
BIZ 710 156
6
12
10-92
13
Reference
Tearing out resis- Shearing resistance Shearing resistance
(daN)* 2 x 12.5 mm
tance (daN)* 2 x 12.5 (daN)* 12.5 mm
mm plasterboard
plasterboard
plasterboard
22
33
67
22
33
Quantity per carton
box
50
67
50
BRASS PLUGS
Ideal for light suspension work.
Brass.
Expands by screwing.

Grooved body provides maximum grip.
Reference
Thread type
Drilling Ø (mm)
Length (mm)
Permitted load (daN)*
Quantity per box
BIZ 710 420
M6
8
23
220
100
BIZ 710 421
M8
10
30
300
50
BIZ 710 422
M10
12
33
350
50
BIZ 710 423
M12
15
40
400
25
SUPPORTING SYSTEMS
TOGGLE HOOKS
For light-duty fixing in hollow materials.
Common application: supporting lighting in a false ceiling.
White zinc-plated steel.
Fitted using 25 mm wide washers.
Pivoting nut.
Reference
Type
Screw Ø (mm)
Thread length (mm)
Toggle length (mm)
BIZ 710 150
"000"
5
70
50
Maximum wall thickness
(mm)
45
BIZ 710 151
"00"
5
90
85
BIZ 710 152
"0"
6
110
79
Drilling Ø (mm)
18
10
50
18
10
65
24
10
82
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
SUPPORTING SYSTEMS
TOGGLE EYE HOOKS
Suspending light weights from the ceiling.
Nut breaking strength in steel plate: 100 kg (Value given from the point of initial distortion of
the part).
Reference
Type
Screw Ø (mm)
Thread length (mm)
Toggle length (mm)
BIZ 710 321
"00"
5
87
79
Maximum wall thickness
(mm)
38
BIZ 710 322
"00"
6
83
79
40
14
15
BIZ 710 323
"0"
6
110
95
54
16
10
Drilling Ø (mm)
14
15
TOGGLES
For M6 threaded rods.
Nut breaking strength in steel plate: 100 kg (Value given from the point of initial distortion
of the part).
Reference
Type
Screw Ø (mm)
Thread length (mm)
Toggle length (mm)
Drilling Ø (mm)
BIZ 710 154
"0"
6
100
95
16
20
CUP HOOKS
Suspension in solid materials. Set in a plug.
Reference
BIZ 710 153
Screw Ø (mm)
Plug Ø (mm)
Length (mm)
Quantity per box
4
5
30
50
Tear-out resistance concrete
(safety coeff 1:4) (kg)
70
Tear-out resistance in pine
(safety coeff 1:3) (kg)
40
Special concrete suspension screw with fitting tool.
May be used in wood.
Fully threaded nickel chrome-plated steel.
Supplied with fitting tool.

Economical: needs no plug.
Practical: ﬁtting tool is set on a power tool.
Reference
BIZ 710 175
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Drilling Ø (mm)
5
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
50
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
SUSPENSION SCREW-BOLT
83
HARDWARE
SUPPORTING SYSTEMS
SUSPENSION LOCKS WITH INTEGRATED UNLOCKING SYSTEM
The quickest alternative to the traditional suspension system.
For electrical and mechanical installations such as fastening of cable trays, light fixtures,
ventilation ducts, signs or any other static suspension.
Suspension locks with built-in unlocking system compatible with steel cables
Ø 1.5 and 2.5 mm.
• Load accepted (cable Ø 1.5 mm): 35 kg*.
• Load accepted (cable Ø 2.5 mm): 70 kg*.
* The strengths given for the BIZ 710 365 and BIZ 710 366 locks require the use of
BIZ 710 360, BIZ 710 361, BIZ 710 363 and BIZ 710 364 cables.
APAVE test report available on request.

Easy and quick adjustment without speciﬁc tool.
Reduced assembly time.
No predeﬁned length for maximum adaptability.
Reference
Compatible wire Ø (mm)
Quantity per box
BIZ 710 365
1.5-2.5
25
BIZ 710 366
1.5-2.5
100
REEL OF WIRE
Create wire loops for static light-duty suspensions.
Woven steel wire.
Strand core: 7 x 7 steel brands.
Reference
Cable Ø (mm)
Length (m)
BIZ 710 360
1.5
50
BIZ 710 363
1.5
150
BIZ 710 361
2.5
50
BIZ 710 364
2.5
150
Y-FIT ACCESSORIES FOR CABLE TRAYS
Ideal for hanging all types of wire mesh cable trays and compatible with certain perforated
cable trays.
Steel cable Ø 2 mm.
Length of strands 300 mm with galvanized steel hook at each end.

Single anchoring point, no adjustment required.
Snap hooks: easy removal for maintenance.
Reference
BIZ 710 357
84
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Load accepted (kg)
70
10
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
SUPPORTING SYSTEMS
Y-FIT ACCESSORIES FOR LIGHT FIXTURES
Easy solution to hang any type of light fixtures.
Steel cable Ø 1.5 mm.
400 mm strands with 40 mm end tips at each end.

Easy and quick ﬁtting without speciﬁc tool.
Single anchoring point, no adjustment required.
Reference
BIZ 710 358
Load accepted (kg)
35
10
SECURING KITS FOR FLUSH MOUNTING CEILING BOXES
The kit allows rear fastening on the framework as per NFC 15-100 standard for surface
mounted or suspended light fixtures up to 25 kg.
Kit contains:
• 5 suspension locks.
• 5 steel cables Ø 1.5 mm, cable length 1.5 m with a welded end and an M6 threaded bit on
the other end.

The M6 threading is compatible with all ceiling mouting boxes in the market.
Reference
BIZ 710 355
Load accepted (kg)
25
5
SECURING KITS FOR RECESSED LIGHT FIXTURES
This kit is used to secure recessed lights or downlights to the closest solid structure
(beam, ceiling or wall).
Kit contains:

The spring clips adapt to all holes from Ø 6 to 8 mm.
Easy clipping on all types of U-bolt.
Reference
BIZ 710 356
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Load accepted (kg)
30
5
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
• 5 suspension locks.
• 5 steel cables Ø 1.5 mm, length 2 m both ends welded.
• 5 spring clips.
85
HARDWARE
SUPPORTING SYSTEMS
SUSPENSION HOOKS
For fixing perforated bands up to 25 mm wide.
Suspension fixings for concrete, blocks, solid brick, slabs, stone.
Safety coefficient 1:4.
A2 stainless steel.
Supplied with fitting tool.
CSTB ED/05-010 report.
Technical documentation available on request: Test report.

Cost-efﬁcient: quick and easy to ﬁt, no plugs required.
Reference
Tear-out resistance (daN)* concrete
Maximum width of perforated band (mm)
Quantity
65
25
50
BIZ 710 312
PERFORATED BANDS, 10 M
Supporting pipes, fixing cables, etc.
Sendzimir galvanised finish 1.0332 steel (pre-galvanised).
»
ISO 4998
Reference
Length (m)
Width (mm)
Thickness (mm)
Hole Ø (mm)
BIZ 710 310
10
12
0.7
5.5
70
BIZ 710 311
10
17
0.7
6.5
98
"S" HOOKS
Standard round hooks.
Zinc-plated steel.
Reference
Ø (mm)
Total height (mm)
Total length (mm)
Opening width (mm)
BIZ 710 170
3.4
29.5
24
5
100
BIZ 710 173
4
34.5
27
6
50
CHAINS
Durable hanging. e.g. security (theft), etc. (BIZ 710 172).
Must not be used for lifting, coupling or load carrying.
Long-link, electro-zinc steel, ordinary straight chain.
»
DIN 5685/C
Reference
BIZ 710 171
Length (m)
Ø (mm)
25
2.5
Internal link dimen- External link dimen- Numbers of links per Elastic limit or test
sions (L x W) (mm) sions (L x W) (mm)
meter
load (daN)*
24 x 5
29 x 10
41.5
75
40
(kg)
2.5
BIZ 710 172
25
3
26 x 6
32 x 12
38.5
112
56
4
BIZ 710 174
100
2.5
24 x 5
29 x 10
41.5
75
40
10
86
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
SUPPORTING SYSTEMS
STEEL EDGE CLIPS
For fixing electrical tubes or cables by clamping the H or I beam in metallic framework.
Material: crIll passivated zinc-plated steel.
Operating temperatures: 150 °C max.
Resistance to salt mist before red rust: 400 hours.
Reference
Cable Ø (mm)
Quantity per box
BIZ 710 260
2/7
6/9
100
BIZ 710 261
2/7
10/14
100
BIZ 710 262
2/7
15/21
100
BIZ 710 263
2/7
22/32
100
BIZ 710 264
8/12
6/9
100
BIZ 710 265
8/12
10/14
100
BIZ 710 266
8/12
15/21
100
BIZ 710 267
8/12
22/32
100
IPN BEAM CLAMPS
MULTI-PURPOSE TIGRE® BEAM CLAMPS
Quick, multi-purpose fixing system usable with “S” suspension hooks, M6 threaded rods, M8
smooth rods, wire and 9 mm cable ties.
Enables fixing and hanging on beams 2 to 24 mm thick.
Hardened steel with MAGNI® 2-layer 12 micron finish.
Tensile strengh (safety factor 1:4): static load up to 120 kg on 6 mm thick beams.
Salt spray resistance: 600 hours.
Technical documentation available on our web site: User manual.

Easy installation: manually or using a hammer.
Reference
Quantity per box
BIZ 710 370
2-8
100
BIZ 710 373
2-8
25
BIZ 710 371
8-16
50
BIZ 710 374
8-16
20
BIZ 710 372
16-24
20
CHAIN SUSPENSION BEAM CLAMPS
CK-67 Carbon steel to DIN 17222.
HRC 43-45 hardness after treatment.
Salt spray resistance: 480 hours (DIN 50021).
DIN 17222/DIN 50021
Reference
Tensile strength (safety coeff 1:3) (kg)
BIZ 710 375
4-10
90
25
BIZ 710 376
10-15
90
25
BIZ 710 335
15-20
90
25
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
Quantity per box
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
87
HARDWARE
SUPPORTING SYSTEMS
IPN BEAM CLAMPS
M6 THREADED ROD BEAM CLAMPS
»
DIN 17222/DIN 50021
Reference
Quantity per box
BIZ 710 377
4-10
70
25
BIZ 710 378
10-15
70
25
BIZ 710 336
15-20
70
25
CABLE TIE BEAM CLAMPS
»
DIN 17222/DIN 50021
Reference
Quantity per box
BIZ 710 337
4-10
90
25
BIZ 710 338
10-15
90
25
BIZ 710 339
15-20
90
25
"FASTEN ALL" RAIL FOR IPN/IPE BEAM
Install cable trays, ventilation ducts, light fixtures, pipes, or any suspension
on 2 to 20 mm thick beams.
Use with "S" hooks, M6, M8 and M10 threaded rods, wires, plumbing hooks,
cable ties.
Can also be used to support cable trays.
Graded steel rail 1.0242 Sendzimir galvanized finish.
Clamps in zinc-plated steel.
Finish caps.
CSTB report n° EEM 12 26038684.

Easy ﬁxing without drilling or welding.
Used to hang heavy and dynamic loads.
Multi-purpose.
Reference
Length
(mm)
Thickness of metal sheet
(mm)
Distance between the hooks
(mm)
80
BIZ 710 345
400
< 12
Load configuration
Acceptable load
(daN)*
Centered
189
Off-centered 100 mm
54
Off-centered 150 mm
45
Off-centered 200 mm
32.5
Off-centered 260 mm (max)
30
120
Centered
172
160
Centered
108
88
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
SUPPORTING SYSTEMS
"FASTEN ALL" RAIL FOR IPN/IPE BEAM
Length
(mm)
Reference
BIZ 710 346
Thickness of metal sheet
(mm)
Distance between the hooks
(mm)
Load configuration
80
23
Centered
289
Off-centered 100 mm
99
Acceptable load
(daN)*
120
400
< 20
Off-centered 150 mm
72
30
Centered
210
160
180
Centered
203
Centered
215
Off-centered 100 mm
116
Off-centered 150 mm
113
Off-centered 200 mm
117
120
BIZ 710 347
ACCESSORY
600
< 20
Off-centered 300 mm
41
42
160
Centered
208
180
Centered
193
SLIDING NUTS
To be combined with "Fasten-All" rails BIZ 710 345, BIZ 710 346 and BIZ 710 347.
Metallic part in 1.0332 zinc-plated steel.
Green polyoxymethylene plastic spring.

Automatic locking upon tightening.
Pre-assembled version: 40 % time saving product!
Reference
Thread type
Type
BIZ 710 342
M8
Bare
50
BIZ 710 343
M10
Bare
25
BIZ 710 340
M8
Pre-assembled
15
BIZ 710 341
M10
Pre-assembled
15
THREADED RODS
Blue-white zinc-coated steel, 5/7 μ class 4.6.

NFE 25 136
Reference
Thread type
Length (m)
Thread pitch
BIZ 710 200
M6
1
100
Colour
Red
BIZ 710 201
M8
1
125
Dark blue
BIZ 710 206
M10
1
150
Green
BIZ 710 207
M12
1
175
Black
BIZ 720 200
M6
2
100
Red
BIZ 720 201
M8
2
125
Dark blue
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
Saves time by identiﬁcation of the threads with colour coding on the end of each length.
89
HARDWARE
SUPPORTING SYSTEMS
STAINLESS STEEL THREADED RODS
A2 stainless steel.
»
DIN 976
Reference
Thread type
Length (m)
Thread pitch
BIZ 710 520
M6
1
100
BIZ 710 521
M8
1
125
THREADED RODS CONNECTORS
Female/female connectors.
Joining threaded rods.
Zinc-plated steel.

Adapt the rod length perfectly to the work.
Reference
Thread type
External shape
Length (mm)
Thread pitch
M6
Cylindrical
30
100
50
BIZ 710 203
M8
Cylindrical
30
125
50
BIZ 710 204
M10
Hexagonal
19
150
25
BIZ 710 205
M12
Hexagonal
20
175
25
BIZ 710 202
CABLE TRAY FASTENERS AND FIXINGS
CARRIAGE BOLTS (ROUND HEAD, SQUARE COLLAR)
For fastening and fixing wire mesh cable trays.
Zinc-plated steel.
Square collar:
• Maximum height: 3 mm.
»
ISO 8678
Reference
90
Thread type
Length (mm)
BIZ 710 060
M6
12
100
BIZ 710 061
M6
16
100
BIZ 710 062
M6
20
100
BIZ 710 063
M6
30
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
CARRIAGE BOLTS (ROUND HEAD, SHORT SQUARE COLLAR)
Zinc-plated steel.
Collar height: 1 mm.
Square collar: 6 x 6 mm.

Short collar: optimum tightening for perforated cable trays.
Reference
BIZ 710 068
Thread type
Length (mm)
M6
20
100
B30 CLIPS
For assembling all wire mesh cable trays: connections and elbows.
Compatible with all brands of wire mesh cable trays.
Zinc-plated steel.
Square hole: 7 x 7 mm.
Reference
BIZ 710 410
Length (mm)
Quantity per bag
30
50
B20 CLIPS
Zinc-plated steel.
Square hole: 7 x 7 mm.
Reference
BIZ 710 411
Length (mm)
Quantity per bag
22
50
B20/B30 CONNECTION KIT
Kit contains:
• Carriage bolts 6 x 20 mm.
• B20 clips.
• B30 clips.

Zinc-plated steel.
All assembly components grouped in the same box.
Reference
BIZ 710 413
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
50
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
91
HARDWARE
B20 FAST CONNECTION KIT
Kit contains:
• B20 clips with welded bolts 6 x 20 mm.
• Flanged nuts M6.
For assembling all wire mesh cable trays.
Zinc-plated steel.
Notched nut base Ø: 1.7 mm.

Welded clips and carriage bolts to save time upon assembly.
Wide notched base nut to block the wires.
Reference
BIZ 710 412
Thread type
M6
50
SPLICE BAR 225 MM
Bolted splice bar.
For reinforcing all wire mesh cable trays.
Pre-galvanized steel.
3 perforations:
• 2 oblong 7 x 12 mm.
• 1 square 7 x 7 mm.
Reference
Length (mm)
BIZ 710 417
225
FLAT SPLICE BAR 1200 MM
Bolted splice bar.
For reinforcing all wire mesh cable trays.
Can be used for long radius elbows.
Zinc-plated steel.
Oblong perforation: 30 x 7 mm.

Can be trimmed to any length with a shear or bolt cutter if needed.
Reference
Length (mm)
BIZ 710 418
1200
MULTI-PURPOSE CLAMP
Used as:
• Wall support for up to 100 mm wide wire mesh cable trays.
• Junction box support.
• Ground support for running cable trays in the false floor.

One part, three uses!
Reference
Tensile strength (daN)*
BIZ 710 414
100
92
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
SIDE HANGING CLIP
Side holder for suspension of wire mesh cable trays by M6 to M10 threaded rods.
For up to 300 mm wide trays.

Enables to stack several cable trays.
Can also be ﬁxed on Strut rail 41 x 21 mm.
Reference
BIZ 710 415
100
B40 CLIP
Central suspension clip for M6 to M8 threaded rods.
Also used to assemble two crossing cable trays.
For up to 200 mm wide trays.
Fastened by pair.
Perforation 7 x 20 mm and 8.5 mm Ø.
BIZ 710 416
Length (mm)
40
100
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
93
TAPES AND
CHEMICALS
94
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES
T
APES AN
AND
ND C
CHEMICALS
HEMIC
CALS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
INSULATING TAPES
P.96
MULTI-PURPOSE TAPES
P.97
TAPES FOR SPECIFIC APPLICATIONS
P.99
CHEMICAL FIXINGS
P.101
PU AND FIRE- RESISTANT FOAMS
P.106
MAINTENANCE AEROSOLS
P.110
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
95
TAPES AND CHEMICALS
INSULATING TAPES
ELECTRICAL INSULATION TAPES 15 MM X 10 M X 0.15 MM
Electrical insulation, protection and identification.
General use.
Plasticized PVC tapes, synthetic rubber adhesive mass.
Flexible, press-on adhesive tape.
Flame-retardant/Self-extinguishing.
Acid and alkali resistant.
Lead free.
Dimensions: 15 mm x 10 m x 0.15 mm.
Tensile strength: > 20 N/cm.
Elongation at break: > 125 %.
Adhesion to steel 2B: 1.80 N/cm.
Adhesion to backing: 1.80 N/cm.
Dielectric strength: 40 kV/mm.
Insulation resistance: 1011 Ω/25 mm.
Operating temperature: 0 °C to +90 °C.
Application temperature: -10 °C to +40 °C.
»
EN 60454, IEC 60454-3-1-5/F-PVC P/90 certified
Reference
Colour
Quantity per bag
BIZ 350 010
Yellow;green;white;black;blue;red;grey;brown
8
BIZ 350 012
White
8
BIZ 350 013
Black
8
BIZ 350 014
Blue
8
BIZ 350 015
Red
8
BIZ 350 016
Grey
8
BIZ 350 017
Yellow/green
8
BIZ 350 018
Brown
8
BIZ 350 019
Yellow
8
ELECTRICAL INSULATION TAPES 19 MM X 20 M X 0.15 MM
Electrical insulation, protection and identification.
General use.
Plasticized PVC tapes, synthetic rubber adhesive mass.
Pressure-sensitive flexible tape.
Acid and alkali resistant.
Lead free.
Tensile strength: > 20 N/m.
Elongation at break: > 125 %.
Insulation resistance: 1011 Ω/25 mm.
Operating temperature: 0 °C to +90 °C.
»
96
EN 60454
Reference
Colour
Quantity per bag
BIZ 350 091
Green
8
BIZ 350 092
White
8
BIZ 350 093
Black
8
BIZ 350 094
Blue
8
BIZ 350 095
Red
8
BIZ 350 096
Grey
8
BIZ 350 097
Yellow/green
8
BIZ 350 098
Brown
8
BIZ 350 099
Yellow
8
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES AND CHEMICALS
INSULATING TAPES
HIGH PERFORMANCE VINYL TAPE
High performance electrical vinyl tape.
Synthetic rubber adhesive mass.
Flexible, press-on adhesive tape.
High resistance to sunshine, water, oil, acid, alkali and corrosive chemicals.
Lead free.
Implementation of cable harnesses, splicing, wire and cable terminations.
Repairing conduits.
Electrical insulation at high and low temperatures.
Suitable for outdoor use, UV-resistant.
Tensile strength: 32 N/cm.
Elongation at break: 240 %.
Insulation resistance: 5.0 x 109 Ω/25 mm.

»
High resistance to extreme temperatures.
UV resistant.
No feathering.
EN 60454, IEC 60454-3-1-11/F-PVCp/105 certified
Reference
Colour
BIZ 225 033
Black
MULTI-PURPOSE TAPES
MULTI-PURPOSE VINYL TAPE
Embossed PVC tape, natural rubber adhesive mass.
Easily moulded to shape.
General use.
Protection and retention of wires and cables.
Adhesion: 1.5 N/cm.
Unroll force: 2.8 N/cm.
Water resistant.
Suitable for indoor and outdoor use.
Can be torn by hand.
Reference
Colour
BIZ 351 030
White
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS

PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
97
TAPES AND CHEMICALS
MULTI-PURPOSE TAPES
DUCT TAPE
Polyethylene fabric tape, natural rubber adhesive mass.
Joints and repairs on PVC ducting.
Sealing and thermal insulation of ventilation ducts.
Connections between extractor units and pipework.
Adhesion: 4.5 N/cm.

Resistant to heat and humidity.
High adhesion.
Reference
Colour
BIZ 351 020
Grey
VINYL TAPES
PVC tape, rubber adhesive mass.
Suitable for outdoor use, UV resistant.
General use, marking and demarcating.
Fixing and securing plastic sheeting.
Repairing plastic sacks.
Joining and sealing insulation materials (insulation panels, polystyrene, glass fibre, etc.).
Dimensions: 33 m x 0.13 mm.
Adhesion: 1 N/cm.

Damp resistant.
Good resistance to abrasion, oils, acids and alkalis.
Reference
98
Width (mm)
Colour
BIZ 351 010
50
Orange
BIZ 351 011
75
Orange
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES AND CHEMICALS
DOUBLE-SIDED PE FOAM TAPE
Double-sided PE foam tape, solvented acrylic adhesive.
Assembly operations for which a good load bearing capacity is required.
Hanging mirrors, rods and mouldings.
Signs and panels.
Adhesion at 180° on stainless steel: 12 N/cm.
Tensile strength: 65 N/10 mm2.
Density: 100 kg/m 3.
Application temperature: +15 °C to +30 °C.
Bonding period (at 23 °C): 24 hr.

Suitable for indoor and outdoor use (high resistance to UV, humidity and solvents).
Excellent performance against shearing.
Reference
Colour
BIZ 351 070
White
MECHANICAL VENTILATION TAPES
Aluminium tape, acrylic adhesive mass.
Joints in galvanised steel pipework.
Adhesion: 10 N/cm.
Operating temperature: 100 °C.

High adhesion.
Reference
Colour
BIZ 351 021
Aluminum
MASKING TAPE
Crepe paper tape, solvented rubber adhesive mass.
General and temporary use.
Adheres to all types of materials: metal, glass, plastic, rubber, etc.
Will not leave residues up to 60 °C.
For interior use; if used outdoors, remove the tape within 8 hours of application.
Adhesion: 2 N/cm.
Quality perfectly suited to professional painters’ needs.
Solvent resistant.
Reference
Colour
BIZ 351 060
Cream
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS

PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
99
TAPES AND CHEMICALS
RED/WHITE ADHESIVE DEMARCATION TAPE
Floor marking of evacuation routes.
Identification of safety equipment areas (first aid equipment, fire point, etc.).
Identification of hazardous or flammable substances.
Adhesion: 1.2 N/cm.
Unrolling force: 2.3 N/cm.
Reference
BIZ 351 050
YELLOW/BLACK ADHESIVE DEMARCATION TAPE
Marking of hazardous traffic routes in workshops.
Identification of mobile equipments.
Demarcation of areas with restricted passage.
Adhesion: 1.2 N/cm.
Reference
BIZ 351 051
SITE MARKING TAPE
Non-adhesive PET tape.
Reference
100
BIZ 351 040
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES AND CHEMICALS
CHEMICAL FIXINGS
SEALANTS
SILICONE SEALANTS
Resistant to mold and fungus growth.
Bonds without primer on surfaces such as glass, enamel, ceramic, faience, epoxy, stainless
steel, polyester, anodized aluminium, painted or varnished wood and stainless metals.
For:
• Finishing joints and seals in damp premises (showers, bath tubs, sinks, kitchens),
• Sealing and finish seals in prefabrication, traditional construction and renovation,
caulking seal,
• Elastic cap in glazing/mirrors,
• Flexible glue of miscellaneous materials,
• Joinery framework finishing.
Resistance to temperature: -40 °C to +120 °C.
Skin forming time: 5 min (23 °C/50 % R.H.).
Curing speed: 3.5 mm/24 hr (23 °C/50 % R.H.).
Storage: 12 months in sealed original packaging, between +5 °C and +25 °C.
Lifetime: 12 months.

Quick curing.
Permanent ﬂexibility.
Yellowing resistant.
Reference
Colour
Net volume (ml)
BIZ 710 212
White
300
BIZ 710 213
Transparent
300
ACRYLIC SEALANT
For:
• Connection and finish joints before painting,
• Fills cracks in plaster, wood, cement and concrete,
• Connection joints in construction and tightening of wood, alu or PVC joinery
with inside masonry,
• Gluing and jointing cellular concrete.
Smoothing time: 5 min (23 °C and 55 % R.H.).
Durable elasticity.
Does not corrode metals.
Good resistance to climatic ageing and U.V.
Can be painted.
Reference
Colour
Net volume (ml)
BIZ 710 218
White
300
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

101
TAPES AND CHEMICALS
CHEMICAL FIXINGS
SEALANTS
MS POLYMER SEALANT ADHESIVE
Bonds without primer to most materials: wood, brick, concrete, natural stone, floor tiles,
ceramic, steel, aluminium, zinc, copper, chrome-plated and stainless steel, glass, synthetic
materials and miscellaneous insulation, even on humid surfaces.
Free of reagent isocyanates, nor silicons.
For:
•
•
•
•
•
•
Small movement seals in traditional or prefabricated buildings,
Flexible gluing of cladding panels on wood, concrete, masonry or metallic structures,
Small movement seals in the building,
Flexible gluing of decorative indoor or outdoor elements,
Sealing gasket of roof and dripping elements,
Watertight seals in metallic construction.
Transparent sealant adhesive allows also gluing and repairing on transparent materials
or objects such as showcases, glazed assemblies, used indoors.
Polymerisation speed: 2-3 mm/24 hr.
Storage: +5 °C and +25 °C.

Can be painted.
Reference
Colour
Net volume (ml)
Lifetime
BIZ 710 208
White
300
12 months
BIZ 710 209
Transparent
300
9 months
FIXATION ADHESIVES
ACRYLIC ADHESIVE
Bonds onto wood, stone, concrete, plaster and insulation material such as polystyrene and
polyurethane, etc.
For:
• Gluing mouldings, rosaces, rails, skirting, cleats and panelling,
• Gluing framework and door panel cladding, lighting appliques, cornices,
columns and consoles,
• Gluing natural stone and faience,
• Gluing small size slabs and tiles,
• Gluing and finish of plaster blocks.
Resistance to breakage:
• 20 kg/cm² (4 h/23 °C).
• 30 kg/cm² (8 h/23 °C).

102
Solvent free.
Drip proof.
Reference
Colour
Net volume (ml)
BIZ 710 210
White
300
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES AND CHEMICALS
CHEMICAL FIXINGS
FIXATION ADHESIVES
NEOPRENE ADHESIVE
Bonds on materials such as wood, chipwood, multiplex, rigid PVC, stone, concrete, faience,
etc.
For:
•
•
•
•
Gluing distribution boxes and cable conduits,
Gluing small size slabs and tiles,
Gluing skirting, panels, architraves, thresholds, moldings and skirting,
Fastening lattice and panelling.
Toluene free.
Resistance to breakage:
• 0.5 kg/cm² (4 h/20 °C).
• 15 kg/cm² (168 h/20 °C).
Lifetime: 9 months.

Drip proof.
Reference
Colour
Net volume (ml)
BIZ 710 219
Beige
300
CYANOACRYLATE GLUES
Ethyl ether multipurpose adhesives.
Ideal for gluing synthetic materials and rubbers, especially elastomers.
Colourless.
Maximum crack filling capacity: 0.10 mm.
Low viscosity: 20-40 mPa.s.
Initial adherence:
• On aluminium 30-60 seconds,
• On Nora rubber: 2-10 seconds,
• On hard PVC: 5-30 seconds.
Maximum adhesion after 24 hours.
Resistance to traction and shearing: 13 N/mm2 on hard PVC, 12 N/mm2 on ABS, 13 N/mm2
on PC (tested according to DIN 53283).
Lifetime: 9 months at room temperature.
Extremely quick setting.
Reference
Volume (ml)
Colour
BIZ 710 384
3
Colourless
BIZ 710 385
20
Colourless
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

103
TAPES AND CHEMICALS
CHEMICAL FIXINGS
CHEMICAL RESINS
CHEMICAL RESINS
Styrene-free acrylate epoxy resins.
Cartridges supplied with nozzle.
For:
•
•
•
•
Threaded rods,
Ring or hook,
Anchor,
Shutter hinge, etc.
Minimum setting time:
• 35 minutes at 10 °C,
• 15 minutes at 20 °C.
Temperature rating: -5 °C to +35 °C.

BIZ 710 215 for use without plunger.
Reference
Volume (ml)
BIZ 710 215
170
BIZ 710 314
310
ACCESSORY
LOT OF 10 THREADED RODS
Dimensions: 10 x 110 mm.
Supplied with 10 nuts and 10 bolts.
BIZ 710 297
Reference
ACCESSORY
LOT OF 10 NOZZLES
BIZ 710 315
Reference
ACCESSORY
LOT OF 10 ANCHORS
Reference
BIZ 710 316
CHEMICAL RESIN KIT
Kit contains:
•
•
•
•
•
•
•
1
2
4
4
4
4
4
chemical resin cartridge, 170 ml (BIZ 710 215).
nozzles.
anchors 16 x 85 mm (16 mm Ø drill size).
threaded rods 10 x 110.
plastic nuts.
steel nuts.
steel washers.
Reference
104
BIZ 710 216
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES AND CHEMICALS
CHEMICAL FIXINGS
GUNS FOR CHEMICAL FIXINGS
CAULKING GUN
Aluminium handle.
No-drip function.
Fitted out with a ladder hook.
Reference
Length (mm)
310
230
BIZ 710 214
(g)
480
Aluminium handle.
No-drip function.
Reference
Length (mm)
330
400
BIZ 710 320
(g)
800
THREAD LOCKING

Replaces washers.
Stops accidental unscrewing due to vibration and/or changes in temperature.
Resistant to chemicals and solvents.
Stops leaks of gaseous substances.
Withstands temperatures: -60 °C to +150 °C.
Reference
BIZ 710 386
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Volume (ml)
Colour
24
Blue
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Hardens on contact with metal in the absence of air.
Completely fills thread hollows.
Locking screws and threaded parts (threaded rods, bolts, nuts, etc.) of maximum size M36.
Fixing of cylindrical parts (shaft/hub, pulleys, bearings, etc).
Sealing of surfaces and tubes/screwed connections (conduits).
Hydraulic and pneumatic lines, refrigerant and compressed lines, air screwed connections, etc.
Raised viscosity (2000 to 7000 tm).
Resistance to shearing 9-13 N/mm² to DIN 54452.
Effective for a gap of 0.25 mm maximum.
105
TAPES AND CHEMICALS
FIRE-RESISTANT INTUMESCENT FOAMS AND ACCESSORIES
INTUMESCENT FIRE-RESISTANT FOAMS
2 hours (EI 120) fire-resistant foams complying with European standard 1366-3 for
the treatment of cable ducts in walls and floors.
BIZ 710 317 supplied with 2 mixers and one extension tube for the access of difficult areas.
Treatment of cable passage inside concrete walls, slabs and light plasterboard partition.
Opening up to 500 x 300 mm in concrete.
Dual component cartridges.
Fire resistance: EI 120.
Storage temperature: +5 °C to +30 °C.
Lifetime: 18 months in its closed packaging in a cool dry place.
Technical documentation available on our web site: Test report/Test report 2/SDS.

Excellent yield:
•BIZ 710 317/400 ml = 5 l expanded.
•BIZ 710 319/210 ml = 2.6 l expanded.
Sealed to smoke, gas and heat.
Saves time.
Without halogen-based derivatives.
Reference
Net volume (ml)
Colour
BIZ 710 317
400
Aluminium grey
BIZ 710 319
210
Aluminium grey
ACCESSORY
GUN FOR INTUMESCENT FOAM 400 ML
Gun for BIZ 710 317.
Force: 6 kN.
Piston movement: 2.5 mm by pressure.
Reference
Length (mm)
BIZ 710 318
(g)
312
1100
Aluminium handle.
No-drip function.
Reference
Length (mm)
330
400
BIZ 710 320
106
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
(g)
800
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES AND CHEMICALS
EXPANDING PU FOAMS AND ACCESSORIES
FIRE RESISTANT EXPANDING PU FOAMS
Single-component polyurethane-based foams.
Tests carried out as part of the EN 1366/4 European Standard, concerning polyurethane foam
joints between two concrete slabs.
This product is not suitable for gap filling in cable raceways (in this case, use
intumescent foam BIZ 710 317 or BIZ 710 319).
Supplied with pair of CE gloves under the cap.
Excellent adhesion to all typical construction materials, except polyethylene, silicone,
oil and grease, stripping agents or other similar substances.
Fire resistance: EI 120 or 240 (according to seal width and configuration,
data available in EFECTIS report).
Fire rating: B1.
Skinning: 8 mn approx. (at 20°C/65% R.H).
Completely dry: 24 hr approx., 12 for 20 mm.
May be cut after polymerisation.
Colour: light red.
Resistant to ageing but not to UV radiation.
Technical documentation available on our web site: Test report/SDS.
Yield:
•Spray 750 ml manual version = up to 40 l.
•Spray 750 ml gun version = up to 45 l.
Easy to apply manually or using gun BIZ 710 383 (precise dosing).
Very good thermal and acoustic insulation.
Very good dimensional stability (no shrinkage or post expansion).
HCFC and CFC free.
Long storage time.
Reference
Type
Net volume (ml)
Colour
BIZ 710 394
Hand applied
750
Light red
BIZ 710 391
Gun applied
750
Light red
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

107
TAPES AND CHEMICALS
STANDARD EXPANDING PU FOAMS
Single-component polyurethane-based foams.
Supplied with pair of CE gloves under the cap.
For:
•
•
•
•
•
•
Insulating gaps walls, ceilings, floors and small cross-section shafts.
Gluing and sound-proofing panels.
Insulation, embedding pipes, panels, tiles and corrugated sheeting.
Acoustic and thermal insulation.
Filling cracks and grooves.
Fitting and fixing door and window frames.
Fire rating: B3.
Approximate skinning: 7 to 9 min approx. (at 20 °C/65 % R.H).
Completely dry: 24 h approx., 12 for 20 mm.
May be cut after polymerisation.
Resistant to ageing but not to UV radiation.
Lifetime: In its closed packaging in a cool dry place.
Gun application: 21 months/Manual application: 15 months.

Yield:
•Spray 500 ml manual version = up to 25 l.
•Spray 750 ml gun version = up to 45 l.
Easy to apply manually or using gun BIZ 710 383 (precise dosing).
Very good thermal and acoustic insulation.
Very good dimensional stability (no shrinkage or post expansion).
HCFC and CFC free.
Long storage time.
Reference
Type
Net volume (ml)
Colour
BIZ 710 393
Hand applied
500
Champagne yellow
BIZ 710 390
Gun applied
750
Champagne yellow
PU FOAM GUN
Aluminium spray gun body.
Aluminium adapter, Teflon® coated.
Stainless steel needle.
Copper barrel and nozzle.
Plastic handle.
Chrome-plated iron trigger.
Reference
108
BIZ 710 383
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES AND CHEMICALS
FOAM AND GUN CLEANER
Solvented base for the quick cleaning of PU foam guns (internal and external) and foam that
has not yet hardened.
Reference
BIZ 710 392
Net volume (ml)
Colour
500
Colourless
PU FOAM LOT
Contains:
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
• 5 expanding PU foams gun applied 750 ml (BIZ 710 390).
• 1 foam and gun cleaner 500 ml (BIZ 710 392).
• 1 PU foam gun (BIZ 710 383).
BIZ 710 389
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
109
TAPES AND CHEMICALS
ELECTRONIC MAINTENANCE
ANTISTATIC OPTICAL SURFACE CLEANER
For the efficient removal of dust from optical surfaces.
For:
• LCD and plasma flat screens.
• Can be used on all modern surfaces; non-aggressive.
Non-flammable.

Will not run.
Restores optical properties.
Leaves no trace after application.
Antistatic effect against dust.
Contains no abrasive or solvent.
Reference
Net volume (ml)
BIZ 750 140
400
QUICK DRYING DEGREASING CLEANER
Deep cleans and degreases contacts and electrical systems.
Chlorine-solvent-free formulation.
Highly flammable.
Supplied with a pipette.

Good solvent power.
Efﬁciently replaces classic cleaners based on chlorine solvents, while reducing aggressiveness
problems on certain plastics and harmful vapour effects.
Reference
Net volume (ml)
BIZ 750 101
150
BIZ 750 102
500
LUBRICATING CLEANERS FOR ALL CONTACTS
Clean by depositing a protective lubricating film on contacts and electrical systems.
For:
• Electronic and electrical systems (relays, contactors, transformers).
• Precision engineering.
• Metal, plastic and composite surfaces.
Non-flammable.
Reference
110
Net volume (ml)
BIZ 750 150
400
BIZ 750 151
125
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES AND CHEMICALS
DRY GAS DUST REMOVER
Dries and removes dust.
Ideal for electrical equipment and electronic and/or precision components.
Non-flammable.
Reference
Net volume (ml)
BIZ 750 001
400
INSULATING PROTECTIVE VARNISH
Protects from humidity and corrosion by depositing a protective insulating film.
For:
• Outdoor access control systems.
• Electronic components.
Highly flammable.
Reference
Net volume (ml)
BIZ 750 111
500
TRANSLUCENT SILICONE LUBRICANT
Quickly lubricates plastics.
Pulling wires and cables.
Stops rubbers from sticking and drying.
Protects electrical contacts against humidity.
Highly flammable.
Colourless.
Good compressibility, good thermal stability.
Surface water repellent and non-stick treatment.
Prevents weld splashes from sticking.
Reference
Net volume (ml)
BIZ 750 030
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES

500
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
111
TAPES AND CHEMICALS
BUTANE GAS REFILL
Highly flammable.

Special gas mixture for reﬁlling lighters and soldering irons.
Use upside down.
Reference
Net volume (ml)
BIZ 700 213
150
GENERAL MAINTENANCE
GALVANISING AND ZINC COATING
Cold galvanising of metal surfaces for protection against corrosion and oxidation.
Highly flammable.

Good resistance to chemicals (except acids) and bad weather.
Good adhesion.
Quick drying.
Reference
Net volume (ml)
Resistance to Temperatures (°C)
Resistance to bad weather
BIZ 750 020
500
200
Normal
BIZ 750 021
500
250
Extreme
MULTI-PURPOSE LUBRICATING OIL
Lubricates.
Releases.
Repels damp.
Protects against corrosion.
Removes dust.
For:
• Locks, hinges, bolts, pipes, slides, etc.
• Cable drums, aerials, electrical and mechanical tools, coils, etc.
Highly flammable.
Reference
Net volume (ml)
BIZ 750 040
112
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
500
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
TAPES AND CHEMICALS
GENERAL MAINTENANCE
TRANSLUCENT SILICONE GREASE
For the quick greasing of elastomers and plastic/metal joints.
Highly flammable.

Good compressibility and thermal stability.
Surface water repellent treatment.
Prevents weld splashes from sticking.
Reference
Net volume (ml)
BIZ 750 010
500
LABEL REMOVER
Removes all adhesives and glue residue, traces and dirt from stickers, labels and tapes, while
leaving the surface unaffected.
Eliminates graffiti from metallic surfaces.
Suitable for use on all metal and glass surfaces.
Highly flammable.
Reference
Net volume (ml)
BIZ 750 004
500
TOUCH-UP PAINT

High pigment content and excellent covering capacity: 400 ml = 1 m².
Excellent resistance to bad weather and impacts: good surface hardness.
Reference
Colour
RAL
BIZ 750 160
Flint grey
7032
400
BIZ 750 161
Creamy white
9001
400
BIZ 750 162
Light grey
7035
400
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
Net volume (ml)
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Rectify scratches and damages on enclosures, cabinets, machines and vehicles.
Adhere perfectly to bare metal, aluminium and galvanised steel.
Recommended temperature rating: +10 °C to +27 °C.
Time until touch dry: 10 min.
Time until completely dry: 24 hr.
Use head up.
Chlorine-solvent-free formulation.
Highly flammable.
113
HAND TOOLS
114
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PLIERS
P.116
SCREWDRIVERS
P.127
PLIERS AND SCREWDRIVERS SETS
P.129
CABLE CUTTERS
P.133
CABLE STRIPPERS
P.135
CRIMPING PLIERS
P.140
WRENCHES
P.144
CUTTING, SAWING
AND FILING TOOLS
P.153
HAMMER RANGE
P.162
FIXING TOOLS
P.164
SOLDER TOOLS
P.165
MARKING TOOLS
P.167
MEASURING TOOLS
P.170
ELECTRICAL INSPECTION
AND TESTING DEVICES
P.174
TOOL STORAGE
P.177
TOOL SETS
P.183
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
115
HAND TOOLS
PLIERS
STRIPPING PLIERS
1000 V INSULATED STRIPPING PLIERS
LIFE
TIME
GUARANTEE
Polished head.
Multi-component grip.
»
IEC 60900
Reference
BIZ 790 023
Length (mm)
160
(g)
Stripping capacity
Cutting edge hardness (HRC)
165
Ø 5 mm/10 mm²
60-64
PREMIUM 1000 V INSULATED STRIPPING PLIERS
LIFE
TIME
GUARANTEE
Chrome plated head.

»
Reference
BIZ 790 223
Chrome-plating confers high resistance to corrosion.
IEC 60900
Length (mm)
160
(g)
Stripping capacity
165
Ø 5 mm/10 mm²
60-64
NON-INSULATED STRIPPING PLIERS
LIFE
TIME
GUARANTEE
Polished head.
Plastic coated.
Reference
BIZ 790 122
116
Length (mm)
160
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
(g)
Stripping capacity
130
Ø 5 mm/10 mm²
60
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
PLIERS
CUTTING PLIERS
1000 V INSULATED DIAGONAL CUTTERS
LIFE
TIME
GUARANTEE
Polished head.
IEC 60900
Reference
BIZ 790 026
Length
(mm)
160
(g)
220
Flexible wire cutting capacity Rigid wire cutting capacity
max Ø (mm)
max Ø (mm)
3
2.3
Piano wire cutting capacity
max Ø (mm)
1.6
Cutting edge hardness
(HRC)
60
1000 V INSULATED REINFORCED DIAGONAL CUTTERS
LIFE
TIME
GUARANTEE
Polished head.
»
IEC 60900
BIZ 790 030
Length
(mm)
180
(g)
260
BIZ 790 034
200
290
Reference
max Ø (mm)
max Ø (mm)
3.8
2.7
4.2
3
max Ø (mm)
2.3
(HRC)
64
2.5
64
1000 V INSULATED CUTTING NIPPERS
LIFE
TIME
GUARANTEE
Polished head.
»
IEC 60900
Reference
BIZ 790 033
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Length
(mm)
160
(g)
265
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
max Ø (mm)
max Ø (mm)
3.5
2.2
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
max Ø (mm)
2
(HRC)
64
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
117
HAND TOOLS
PLIERS
CUTTING PLIERS
PREMIUM 1000 V INSULATED DIAGONAL CUTTERS
LIFE
TIME
GUARANTEE
Chrome plated head.

»
Reference
Length (mm)
IEC 60900
BIZ 790 220
145
(g)
175
BIZ 790 221
160
220
max Ø (mm)
max Ø (mm)
2.8
2
3
max Ø (mm)
1.4
(HRC)
60
1.6
60
2.3
PREMIUM 1000 V INSULATED REINFORCED
LIFE
TIME
DIAGONAL CUTTERS
GUARANTEE
Chrome plated head.

»
Reference
Length (mm)
IEC 60900
BIZ 790 230
160
(g)
220
BIZ 790 234
200
290
max Ø (mm)
max Ø (mm)
3.5
2.5
4.2
max Ø (mm)
2.0
(HRC)
64
2.5
64
3
1000 V PREMIUM INSULATED 2 IN 1 DIAGONAL
CUTTERS
LIFE
TIME
GUARANTEE
Chrome plated head.

»
Reference
BIZ 790 222
118
Length
(mm)
160
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Easy cutting and stripping with a single tool.
IEC 60900
(g)
220
Stripping capacity
1.5 mm²/2.5 mm²
Flexible wire cutting capacity
max Ø (mm)
2.2
(HRC)
60
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
PLIERS
CUTTING PLIERS
1000 V PREMIUM INSULATED 6 IN 1
LIFE
TIME
MULTIFUNCTION PLIERS
GUARANTEE
1. For cutting stranded wires 3.5 mm Ø, rigid wires 2.5 mm Ø and piano wire 2 mm Ø.
2. For stripping wires of 1.5 and 2.5 mm².
3. For crimping terminals of 1.5 and 2.5 mm².
4. For looping wires of Ø 4.5 and 6 mm.
5. For cutting M3.5 and M4 bolts.
6. For cutting wires and wiring clips flush.
Polished finish.
Dual material handles.

»
Reference
BIZ 790 035
6 current functions in a single tool.
Ergonomic head tilted by 25° and slim to access difﬁcult points.
IEC 60900
Length
L th
(mm)
(g)
Rigid wire cutting capacity
max Ø (mm)
max Ø (mm)
180
220
2.5
2
(HRC)
64 for the cutting part ;
42 for flush cutting
LOW EFFORT CUTTERS
LIFE
TIME
GUARANTEE
Metal part in carbon steel.
Dual material grip.
These pliers develop a force twice superior to standard pliers thanks to a double lever effect.
Reference
BIZ 790 022
Length
(mm)
180
(g)
220
max Ø (mm)
max Ø (mm)
3.3
2.6
max Ø (mm)
1.8
(HRC)
58
NON-INSULATED DIAGONAL CUTTERS
LIFE
TIME
GUARANTEE
Polished head.
Plastic coated.
BIZ 790 126
Length
(mm)
160
(g)
178
BIZ 790 129
180
240
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
max Ø (mm)
max Ø (mm)
3.4
2.5
3.8
2.7
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
max Ø (mm)
2
(HRC)
64
2.2
64
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

119
HAND TOOLS
PLIERS
COMBINATION PLIERS
1000 V INSULATED COMBINATION PLIERS
LIFE
TIME
GUARANTEE
Polished head.
»
IEC 60900
Reference
BIZ 790 024
Length
(mm)
180
(g)
265
max Ø (mm)
2.8
max Ø (mm)
2.5
(HRC)
60
PREMIUM 1000 V INSULATED COMBINATION PLIERS
LIFE
TIME
GUARANTEE
Chrome plated head.

»
Reference
BIZ 790 225
Length
(mm)
180
IEC 60900
(g)
265
max Ø (mm)
2.8
max Ø (mm)
2.5
(HRC)
60
LONG NOSE PLIERS
1000 V INSULATED HALF-ROUND LONG NOSE PLIERS
LIFE
TIME
GUARANTEE
Polished head.
»
IEC 60900
BIZ 790 027
Length
(mm)
160
(g)
145
max Ø (mm)
2.5
max Ø (mm)
1.6
(HRC)
60
BIZ 790 031
200
190
2.8
1.8
60
Reference
120
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
PLIERS
LONG NOSE PLIERS
1000 V INSULATED HALF-ROUND LONG ANGLED NOSE PLIERS
LIFE
TIME
GUARANTEE
Polished head.
»
IEC 60900
BIZ 790 028
Length
(mm)
160
(g)
145
max Ø (mm)
2.5
max Ø (mm)
1.6
(HRC)
60
BIZ 790 032
200
190
2.8
1.8
60
Reference
PREMIUM 1000 V INSULATED HALF-ROUND LONG
LIFE
TIME
NOSE PLIERS
GUARANTEE
Chrome plated head.

»
IEC 60900
BIZ 790 227
Length
(mm)
160
(g)
145
max Ø (mm)
2.5
max Ø (mm)
1.6
(HRC)
60
BIZ 790 231
200
190
2.5
1.6
60
Reference
PREMIUM 1000 V INSULATED HALF-ROUND LONG
LIFE
TIME
ANGLED NOSE PLIERS
GUARANTEE
Chrome plated head.
»
IEC 60900
BIZ 790 228
Length
(mm)
160
(g)
145
max Ø (mm)
2.5
max Ø (mm)
1.6
(HRC)
60
BIZ 790 232
200
190
2.8
1.8
60
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

121
HAND TOOLS
PLIERS
LONG NOSE PLIERS
NON-INSULATED HALF-ROUND LONG NOSE PLIERS
LIFE
TIME
GUARANTEE
Polished head.
Plastic coated.
Reference
BIZ 790 127
Length (mm)
max Ø (mm)
1.8
(g)
200
170
max Ø (mm)
2.8
(HRC)
60
WATER PUMP AND LOCKING PLIERS
1000 V INSULATED WATER PUMP PLIERS
LIFE
TIME
GUARANTEE
Box joint.
Polished head.
»
IEC 60900
Reference
BIZ 790 029
Length (mm)
(g)
250
330
Adjustment positions
Opening Ø (mm)
7
10-36
PREMIUM 1000 V INSULATED WATER PUMP PLIERS
LIFE
TIME
GUARANTEE
Box joint.
Chrome plated head.
»
Reference
BIZ 790 229
122
IEC 60900
Length (mm)
(g)
250
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
330
Opening Ø (mm)
7
10-36
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
PLIERS
NON INSULATED WATER PUMP PLIERS
LIFE
TIME
GUARANTEE
Box joint.
Reference
BIZ 400 007
Length (mm)
(g)
240
200
Opening Ø (mm)
7
10-32
SELF-ADJUSTING WATER PUMP PLIERS
LIFE
TIME
GUARANTEE
Plastic coated handles.
Adjusts to all sizes automatically.
Reference
Length (mm)
Opening Ø (mm)
BIZ 790 047
180
200
Self-adjustable
32
BIZ 790 048
250
390
Self-adjustable
40
(g)
SELF GRIPPING WRENCH
LIFE
TIME
GUARANTEE
Wheel adjustment.
Return spring on unlocking lever.
Jaws in forged steel.
Reference
BIZ 700 599
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Length (mm)
250
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
(g)
800
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
Opening Ø (mm)
85
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

123
HAND TOOLS
PLIERS
ELECTRONICS PLIERS
LONG NOSE ELECTRONICS PLIERS
LIFE
TIME
GUARANTEE
Polished head.
Reference
BIZ 700 302
Length
(mm)
130
Jaws length
(mm)
33
(g)
112
For wire of maximum Ø
(mm)
0.91
Maximum resistance to a
pulled wire (Mpa)
84
(HRC)
55-62
ELECTRONICS HIGH PRECISION CUTTERS
LIFE
TIME
GUARANTEE
Do not use for cutting steel cables.
21° angle cutting edge.
Reference
Length (mm)
BIZ 700 862
(g)
180
For wire of maximum Ø (mm)
Hardness (HRC)
1.3
52-56
80
CUTTING PLIERS FOR ELECTRONICS
LIFE
TIME
GUARANTEE
Polished head.
BIZ 700 300
Length
(mm)
110
(g)
112
Jaws length
(mm)
14.5
For wire of maximum Ø
(mm)
1.2
Maximum resistance to a
pulled wire (Mpa)
126
(HRC)
58-62
BIZ 700 301
115
112
15
0.91
84
55-62
Reference
124
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
PLIERS
ELECTRONICS PLIERS
ELECTRONICS TOOL BOX
LIFE
TIME
GUARANTEE
Box contains:
8 electronics screwdrivers-length 152 mm including blade 60 mm:
•
•
•
•
•
•
•
•
1
1
1
1
1
1
1
1
slotted screwdriver, 1.2
PH 000 screwdriver.
PH 00 screwdriver.
PH 0 screwdriver.
mm.
mm.
mm.
mm.
mm.
3 electronics pliers:
• 1 electronics pliers BIZ 700 300.
Electronics screwdrivers blades in satin chrome steel with polished tip.
Handles in polypropylene and elastomer.
Reference
BIZ 700 516
STRAIGHT TWEEZERS
LIFE
TIME
GUARANTEE
Stainless steel.
Reference
BIZ 700 585
PLUG PLIERS
METAL PLUG INSERTION TOOL
LIFE
TIME
GUARANTEE
Tool for inserting metal plugs in hollow materials 4 to 8 mm Ø.
Easy to use in corners.
Reference
BIZ 700 297
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
(g)
365
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
Screw type
Pulling distance (mm)
Contact surface (mm)
M4 M5 M6 M8
20
20 x 20
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

125
HAND TOOLS
PLIERS
PLUG PLIERS
METAL PLUG RATCHET INSERTION TOOL
LIFE
TIME
GUARANTEE
Tool for inserting metal plugs in hollow materials 4 to 8 mm Ø.

5 notch ratchet to facilitate the expansion operation.
Increased pulling stroke for saving time.
Reference
(g)
BIZ 790 200
542
Screw type
Pulling distance (mm)
M4 M5 M6 M8
30
CABLE TIE PLIERS
CABLE TIE PLIERS
LIFE
TIME
GUARANTEE
For installation and cable ties from 3.6 to 9.5 mm wide and 1.3 to 2.3 mm thick.
Spring lifetime 60,000 cycles.
Body in carbon steel.
Reference
BIZ 700 010
STAINLESS STEEL CLAMP PLIERS
LIFE
TIME
GUARANTEE
For fastening and cutting 4.5 to 12 mm wide stainless steel clamps.
Reference
126
BIZ 790 010
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
SCREWDRIVERS
1000 V INSULATED SCREWDRIVERS
LIFE
TIME
GUARANTEE
Chrome vanadium steel with blackening finishing.
Polypropylene insulation.

IEC 60900
Reference
Tip
Blade width (mm)
BIZ 700 014
Slotted
2.5
Length (mm)
75
BIZ 700 015
Slotted
3
100
BIZ 700 485
Slotted
3.5
100
BIZ 700 016
Slotted
4
100
BIZ 700 017
Slotted
5.5
125
BIZ 700 018
Slotted
6.5
150
BIZ 700 509
Slotted
8
175
BIZ 700 504
PH0
3
60
BIZ 700 021
PH1
4.5
80
BIZ 700 022
PH2
6
100
BIZ 700 508
PH3
8
150
BIZ 700 500
PZ0
3
60
BIZ 700 019
PZ1
4.5
80
BIZ 700 020
PZ2
6
100
BIZ 700 510
PZ3
8
150
BIZ 700 465
RESISTORX®10
10
100
BIZ 700 466
RESISTORX®15
15
125
BIZ 700 467
RESISTORX®20
20
125
BIZ 700 468
RESISTORX®25
25
125
1000 V COMBINATION HEAD INSULATED SCREWDRIVER FOR MODULAR EQUIPMENT
GUARANTEE
The solution for mixed head screws on electrical equipment (contactors, residual current
switches, isolators, relays, circuit breakers, enclosures).
Blade in high-quality alloy steel for extra hard wear.

»
LIFE
TIME
Optimum grip of the screw due to the combination head reducing wear on the screw and
ensuring better torque.
Ergonomic handle for better grip.
Identiﬁcation facilitated by the head being marked at the top of the handle.
IEC 60900
Reference
Tip
Length (mm)
BIZ 700 486
Double print PZ1/Slotted 1
75
BIZ 700 487
Double print PZ2/Slotted 2
100
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
Ergonomic handle for better use and improved torque.
127
HAND TOOLS
SCREWDRIVERS
1000 V INSULATED SCREWDRIVER BIT HOLDER AND 11 BITS
LIFE
TIME
GUARANTEE
Magnetic bit holder 1/4" hex. (6.35 mm).
Supplied in a storage box containing:
• 3 x slotted bits (4.5 x 0.6 mm/5.5 x 1 mm/6.5 x 1.2 mm).
• 3 x PH bits (PH1/PH2/PH3).
• 2 x PZ bits (PZ1/PZ2).
Bits in chrome vanadium steel.
Maximum torque: 24 Nm.
Length: 220 mm.
Weight: 220 g.

»
Ergonomic handle for better grip.
IEC 60900
Reference
BIZ 700 490
NON-INSULATED SCREWDRIVERS
LIFE
TIME
GUARANTEE
Blade in chrome steel.
Polypropylene handle.
Reference
128
Tip
Blade width (mm)
BIZ 700 574
Slotted
2.5
75
BIZ 700 575
Slotted
3.5
100
BIZ 700 576
Slotted
4
100
BIZ 700 577
Slotted
5.5
125
BIZ 700 578
Slotted
6.5
150
BIZ 700 573
Slotted
8
150
BIZ 700 581
PH1
-
100
BIZ 700 582
PH2
-
125
BIZ 700 583
PZ0
-
75
BIZ 700 579
PZ1
-
100
BIZ 700 580
PZ2
-
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Length (mm)
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
SCREWDRIVERS
RATCHET SCREWDRIVER
LIFE
TIME
GUARANTEE
Supplied with 8 bits:
• 3 x slotted bits (4.5 x 0.6 mm/5.5 x 1 mm/6.5 x 1.2 mm).
• 3 x PH bits (PH1/PH2/PH3).
• 2 x PZ bits (PZ1/PZ2).
Telescopic storage of 8 bits in the handle.
Magnetic bit holder 1/4" hex. (6.35 mm).
Bits in chrome vanadium steel.
Length: 220 mm.
Weight: 220 g.

Easy screwing/unscrewing with the ratchet option.
Reference
BIZ 700 492
PLIERS SETS
ELECTRICIANS KIT OF 3 1000 V INSULATED PLIERS
LIFE
TIME
GUARANTEE
Kit contains:
• 1 x 1000 V insulated stripping pliers 160 mm (BIZ 790 023).
• 1 x 1000 V insulated diagonal cutters 160 mm (BIZ 790 026).
• 1 x 1000 V insulated half-round long nose pliers 200 mm (BIZ 790 031).
»
IEC 60900
Reference
BIZ 790 090
STANDARD KIT OF 3 1000 V INSULATED PLIERS
LIFE
TIME
GUARANTEE
Kit contains:
• 1 x 1000 V insulated stripping pliers 160 mm (BIZ 790 023).
• 1 x 1000 V insulated combination pliers 180 mm (BIZ 790 024).
• 1 x 1000 V insulated half-round long nose pliers 200 mm (BIZ 790 031).
IEC 60900
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
»
BIZ 790 091
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
129
HAND TOOLS
PLIERS SETS
KIT OF 4 1000 V PREMIUM INSULATED PLIERS
LIFE
TIME
GUARANTEE
Kit contains:
• 1 x 1000 V insulated Chrome plated stripping pliers 160 mm (BIZ 790 223).
• 1 x 1000 V insulated Chrome plated combination pliers 180 mm (BIZ 790 225).
• 1 x 1000 V insulated Chrome plated half-round long nose pliers 200 mm (BIZ 790 231).
• 1 x 1000 V insulated Chrome plated reinforced cutting pliers 200 mm (BIZ 790 234).

»
IEC 60900
BIZ 790 240
Reference
SCREWDRIVERS SETS
KIT OF 4 1000 V INSULATED SCREWDRIVERS AND 3 PLIERS
GUARANTEE
Kit contains:
•
•
•
•
•
•
•
1
1
1
1
1
1
1
»
x
x
x
x
x
x
x
1000
1000
1000
1000
1000
1000
1000
V
V
V
V
V
V
V
insulated
insulated
insulated
insulated
insulated
insulated
insulated
slotted screwdriver 3 x 100 (BIZ 700 015).
PZ1 screwdriver 4.5 x 80 (BIZ 700 019).
PZ2 screwdriver 6 x 100 (BIZ 700 020).
stripping pliers 160 mm (BIZ 790 023).
combination pliers 180 mm (BIZ 790 024).
diagonal cutters 160 mm (BIZ 790 026).
IEC 60900
Reference
BIZ 790 094
KIT OF 5 1000 V INSULATED SCREWDRIVERS + TESTER
1
1
1
1
1
1
x
x
x
x
x
x
1000 V
1000 V
1000 V
1000 V
1000 V
voltage
Reference
130
LIFE
TIME
GUARANTEE
Set contains:
•
•
•
•
•
•
LIFE
TIME
insulated slotted screwdriver 2.5 x 75 (BIZ 700 014).
insulated slotted screwdriver 4 x 100 (BIZ 700 016).
insulated PH1 screwdriver 4.8 x 80 (BIZ 700 021).
insulated PH2 screwdriver 6 x 100 (BIZ 700 022).
tester 220-250 V, 140 mm.
BIZ 700 860
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
SCREWDRIVERS SETS
KIT OF 6 1000 V INSULATED SCREWDRIVERS
GUARANTEE
Kit contains:
•
•
•
•
•
•
1
1
1
1
1
1
x
x
x
x
x
x
1000
1000
1000
1000
1000
1000
V
V
V
V
V
V
insulated
insulated
insulated
insulated
insulated
insulated
slotted screwdriver 3.5 x 100 (BIZ 700 485).
PH1 screwdriver 4.8 x 80 (BIZ 700 021).
PH2 screwdriver 6 x 100 (BIZ 700 022).
BIZ 700 483
Reference
1
1
1
1
1
1
x
x
x
x
x
x
1000
1000
1000
1000
1000
1000
V
V
V
V
V
V
insulated
insulated
insulated
insulated
insulated
insulated
PH1 screwdriver 4.8 x 80 (BIZ 700 021).
PH2 screwdriver 6 x 100 (BIZ 700 022).
BIZ 700 456
Reference
»
x
x
x
x
x
x
x
x
1000 V
1000 V
1000 V
1000 V
1000 V
1000 V
1000 V
voltage
insulated PZ1 screwdriver 4.5 x 80 (BIZ 700 019).
insulated PZ2 screwdriver 6 x 100 (BIZ 700 020).
tester 220-250 V, 140 mm.
1
1
1
1
1
1
1
1
LIFE
TIME
GUARANTEE
Kit contains:
•
•
•
•
•
•
•
•
LIFE
TIME
GUARANTEE
Kit contains:
•
•
•
•
•
•
LIFE
TIME
IEC 60900
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 700 093
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
131
HAND TOOLS
SCREWDRIVERS SETS
KIT OF 4 1000 V RESISTORX® SCREWDRIVERS
LIFE
TIME
GUARANTEE
Kit contains:
•
•
•
•
1
1
1
1
x
x
x
x
1000
1000
1000
1000
V
V
V
V
insulated
insulated
insulated
insulated
RESISTORX®
RESISTORX®
RESISTORX®
RESISTORX®
screwdriver
screwdriver
screwdriver
screwdriver
10
15
20
25
x
x
x
x
100
125
125
125
(BIZ
(BIZ
(BIZ
(BIZ
700
700
700
700
465).
466).
467).
468).
BIZ 700 523
Reference
KIT OF 5 1000 V INSULATED SOCKET SCREWDRIVERS
GUARANTEE
Kit contains:
•
•
•
•
•
1
1
1
1
1
»
x
x
x
x
x
1000
1000
1000
1000
1000
insulated
insulated
insulated
insulated
insulated
hex
hex
hex
hex
hex
socket
socket
socket
socket
socket
screwdriver
screwdriver
screwdriver
screwdriver
screwdriver
5 x 125.
7 x 125.
8 x 125.
10 x 125.
13 x 125.
IEC 60900:2004
Reference
132
V
V
V
V
V
LIFE
TIME
BIZ 700 458
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
CABLE CUTTERS
HAND CABLE CUTTERS
CABLE CUTTERS
LIFE
TIME
GUARANTEE
Cable Ø maximum (mm)
Flexible copper cutting capacity (cable cross-section) (mm²)
Length (mm)
BIZ 700 278
Reference
8
16
162
175
BIZ 700 201
10
25
162
173
(g)
HEAVY–DUTY CABLE CUTTER
LIFE
TIME
GUARANTEE
Reference
BIZ 700 001
Length (mm)
21
70
230
(g)
430
AUTOMATIC CABLE CUTTERS
PREMIUM 1000 V INSULATED AUTOMATIC
LIFE
TIME
CABLE CUTTERS
GUARANTEE
Forged steel.
Polished head.
»
Reference
Reduced cutting effort thanks to the return spring built into the central rivet.
Head angled by 25° for cutting comfort even in difﬁcult access locations.
Safety clips into closed position.
IEC 60900
Length (mm)
BIZ 790 036
18
50
180
305
BIZ 790 213
25
70
220
380
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
(g)
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

133
HAND TOOLS
CABLE CUTTERS
RATCHET CABLE CUTTERS
RATCHET CABLE CUTTER, 150 MM²
LIFE
TIME
GUARANTEE
For cables maximum 32 mm Ø.
For copper cable maximum section 150 mm².
For aluminium cable maximum section 240 mm².
Reference
Cutting capacity maximum (cable section) (mm²)
Length (mm)
32
Cu 150/Al 240
254
BIZ 700 011
(g)
770
LIFE
TIME
GUARANTEE
Reference
Lengthh (m)
52
Cu 300/Al 400
335
BIZ 700 202
(g)
1050
RATCHET CABLE CUTTER "ROBUST", 400 MM²
LIFE
TIME
GUARANTEE
Forged steel.
Soft touch plastic handle.

Reference
Cutting capacity maximum (cable section) (mm²)
Length (mm)
54
Cu 400/Al 480
310
BIZ 790 020
134
Built-in fastening tab for support when cutting the cable.
Effort demultiplied by high performance ratchet.
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
(g)
1000
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
CABLE STRIPPERS
STRIPPING KNIVES
STRIPPING KNIFE
LIFE
TIME
GUARANTEE
Supplied with a rigid plastic holster for belt carrying.
Blade shaped and sharpened for perfect stripping of electric cables.
Stainless steel blade 35 mm.
Blue plastic handle.
Reference
Length (mm)
BIZ 700 447
(g)
140
100
CABLE STRIPPER KNIFE WITH HOOKED BLADE
LIFE
TIME
BIZ 790 008
Reference
SPARE BLADE FOR STRIPPING KNIVES
BIZ 790 008 AND BIZ 790 019
LIFE
TIME
GUARANTEE
BIZ 790 009
Reference
CABLE STRIPPER KNIFE WITHOUT HOOKED BLADE
LIFE
TIME
GUARANTEE
Circular and longitudinal stripping by self-swivelling blade.
For round cables 8 to 28 mm Ø.
Adjustable stripping thickness.
Self-swivel spare blade included in the tool's body.
SPARE BLADE FOR STRIPPING KNIVES
BIZ 790 008 AND BIZ 790 019
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
LIFE
TIME
GUARANTEE
BIZ 790 009
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
BIZ 790 019
Reference
ACCESSORY
58
GUARANTEE
Self-swivel spare blade included in the tool's body.
ACCESSORY
Hardness (HRC)
135
HAND TOOLS
CABLE STRIPPERS
STRIPPING KNIVES
CABLE STRIPPER
LIFE
TIME
GUARANTEE
For round cables.
Reference
Cable Ø (mm)
BIZ 700 003
4.5-25
BIZ 700 004
25-36
ACCESSORY
SPARE BLADE FOR STRIPPING KNIVES 700 003 AND BIZ 700 004
Steel blade.
Lifetime 2,000 cuts.
BIZ 700 085
Reference
AUTOMATIC STRIPPING PLIERS
AUTOMATIC STRIPPING GUN PLIERS 0.08 TO 2.5 MM²
For cutting and stripping round, flat or semi-flat wires and cables, from 0.08 to 2.5 mm².
Stripping length adjustment stop from 3 to 17 mm.
Fitted with a wire cutter (2.5 mm² maximum).

GUARANTEE
Gun shape for easier repeat operations.
Reference
Stripping capacity
BIZ 700 071
ACCESSORY
Reference
136
LIFE
TIME
0.08-2.5 mm²
SPARE JAW FOR BIZ 700 071
BIZ 700 209
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
CABLE STRIPPERS
AUTOMATIC STRIPPING PLIERS 0.2 TO 6 MM²
GUARANTEE
Strips wires of 0.2/0.5/0.75/1/1.5/2.5/4/6 mm².
Reference
Stripping capacity
BIZ 700 043
0.2-6 mm²
AUTOMATIC STRIPPING GUN 0.2 TO 6 MM²
LIFE
TIME
GUARANTEE
For stripping round, flat or semi-flat wires and cables, from 0.2 to 6 mm².
Optical stripping length adjustment up to 15 mm.
Fitted with a wire cutter (2.5 mm Ø maximum).
BIZ 700 081
Reference
ACCESSORY
Reference
BIZ 700 210
AUTOMATIC STRIPPING GUN PLIERS 0.2 TO 6 MM²
LIFE
TIME
GUARANTEE
For stripping round wires and cables of a 0.2 to 6 mm² section.
Gun shape suited to regular stripping operations.
Reference
Stripping capacity
BIZ 790 017
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES

LIFE
TIME
0.2-6 mm²
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
137
HAND TOOLS
CABLE STRIPPERS
GUARANTEE
For stripping round, flat or semi-flat wires and cables, from 0.02 to 10 mm².

Opening jaw height manual adjustment according to stripped insulator hardness.
Flexible mechanism for comfortable repetitive work (for example cableman).
Reference
Stripping capacity
BIZ 790 015
ACCESSORY
0.02-10 mm²
BIZ 790 016
Reference
AUTOMATIC STRIPPING PLIERS 6 TO 16 MM²
LIFE
TIME
GUARANTEE
For stripping round wires and cables from 6 to 16 mm² section.
No adjustment stop, through product allowing to strip at any location.
Optical stripping length adjustment 15-18-20 mm.

Circular incision for simpliﬁed stripping of all types of insulators.
Reference
Stripping capacity
BIZ 790 013
ACCESSORY
Reference
138
LIFE
TIME
6-16 mm²
SPARE BLADES FOR BIZ 790 013
BIZ 790 018
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
CABLE STRIPPERS
AUTOMATIC STRIPPING PLIERS FOR FLAT AND ROUND CABLES
For stripping PVC double or triple wire cables from 0.75 mm² to 4.0 mm², flexible wires from
0.5 mm² to 16 mm² and rigid wires from 0.5 to 10 mm².
Optical stripping length adjustment 8-24 mm.

LIFE
TIME
GUARANTEE
The 5-position ﬁne adjustment allows to adapt the trigger to the type of cable used.
Reference
BIZ 700 451
AUTOMATIC STRIPPING PLIERS FOR SOLAR
AND PHOTOVOLTAIC CABLES 1.5 TO 6 MM²
LIFE
TIME
GUARANTEE
For stripping all current flexible cables in the solar technique sector, from 1.5 to 6 mm².
Fitted with a wire cutter (3 mm Ø maximum).

Fine adjustment with 5 positions ensures easy removal of the multilayer insulation in solar
cables.
Reference
Stripping capacity
BIZ 790 021
1.5-6 mm²
MULTI-STRIPPER TOOLS
MULTI-STRIPPER TOOL
LIFE
TIME
GUARANTEE
Circular and longitudinal stripping.
For stripping round wires 0.5 to 6 mm² section.
Wire stripper 0.5 to 6 mm².
Cable cutter (6 mm² maximum).
Flush unsheathing, ideal for difﬁcult access.
Reference
BIZ 700 186
MULTI-STRIPPER TOOL WITH BLADE
LIFE
TIME
GUARANTEE
Circular and longitudinal stripping.
For stripping round wires 0.2 to 4 mm² section.
Retractable straight cutting blade.

Precision cable and wire stripping, ideal for working on ﬂush boxes and junction boxes.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 790 014
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
139
HAND TOOLS
CABLE STRIPPERS
COAXIAL CABLE STRIPPER
LIFE
TIME
GUARANTEE
To strip coax cables, p.e. cables, TV antenna cables, cables with 4.8-7.5 mm Ø and round
PVC cables 3 x 0.75 mm².
Reference
BIZ 700 857
WIRE STRIPPER
LIFE
TIME
GUARANTEE
Carbon steel jaws.
Reference
Stripping capacity
BIZ 700 277
0.5-4 mm²
CRIMPING PLIERS
TERMINALS AND CABLE ENDS CRIMPING PLIERS
LIFE
TIME
GUARANTEE
Length: 229 mm.
Weight: 570 g.
Reference
140
Applications
Section (mm²)
BIZ 700 005
Pre-insulated terminals and sleeves
0.5-6
BIZ 700 006
Insulated and non-insulated cable ends
0.5-4
BIZ 700 009
6-16
BIZ 700 008
Non-insulated terminals and sleeves
1.5-10
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
CRIMPING PLIERS
SQUARE TERMINAL CRIMPING PLIERS
LIFE
TIME
GUARANTEE
For crimping 0.08 to 10 mm² insulated and non-insulated terminals.
Polished head.

Reference
BIZ 790 001
A single die to crimp 0.08 to 10 mm² terminals.
The die adjusts automatically to the size of the terminal to crimp.
Applications
Section (mm²)
Length (mm)
0.08-10
180
(g)
380
CRIMPING PLIERS FOR RJ45, RJ11 AND RJ12 CONNECTORS
LIFE
TIME
GUARANTEE
Pliers with ratchet.
Includes cable cutting and stripping functions.
For crimping 4, 6 and 8-contact modular connectors, RJ45, RJ11 and RJ12.
Polished head.
Reference
BIZ 700 587
Applications
Length (mm)
RJ45/RJ11/RJ12
210
(g)
510
10-IN-1 MULTI-PURPOSE PLIERS
LIFE
TIME
GUARANTEE
The following functions are combined in a single tool:
Tightening.
Stripping from 0.8 mm² to 2.6 mm².
Twisting wires up to 3 mm Ø.
Cutting flexible copper and aluminium wires.
Cutting rigid steel wires of 3 mm Ø.
Bold cutter M3 to M5.
Crimping of insulated and cable ends 0.5 to 6 mm².
Reference
BIZ 700 002
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Applications
Section (mm²)
0.5-6
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
(g)
200
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
•
•
•
•
•
•
•
141
HAND TOOLS
CRIMPING PLIERS
MOBILE CRIMP TOOL AND DIE SETS
CRIMPING TOOL FRAME
LIFE
TIME
GUARANTEE
No crimping dies included.

»
Parallel crimping with approximate 1,000 kg (10,000 N) of contact pressure.
Tested over 2000 crimping cycles. Crimping in compliance with standards EN 60352-2, EN 60999-1 and UL 486A
BIZ 700 260
Reference
ACCESSORY
CRIMPING DIES
Dies supplied with a protection wallet.
High resistance phosphate finish steel crimping dies (HRC 35–55/HV 450–515).

»
Interchangeable dies are kept together with a special pin to simplify handling and prevent loss.
EN 60352-2, EN 60999-1, UL 486A
Reference
BIZ 700 261
BIZ 700 262
142
sertissage_marteau
Applications
Section (mm²)
Dies for insulated and non-insulated cable ends
0.25-10
16-25
BIZ 700 263
For pre-insulated connectors (lugs, clips and crimps)
0.5-2.5
BIZ 700 264
0.1-0.4/4-6
BIZ 700 265
Dies for tube lugs and end to end connectors
4-10
BIZ 700 266
Dies for non-insulated male and female clips
0.5-6
BIZ 700 267
Dies for computer connectors
RJ 45 8/8
BIZ 700 268
Dies for coaxial computer connectors
RJ11 6/6.6/4.6/2
BIZ 700 269
CATV RG6/RG59
BIZ 700 270
BNC RG58/RG59/RG62/RG71
BIZ 790 271
Photovoltaic connector
MC4
BIZ 790 272
MC3
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
CRIMPING PLIERS
CRIMPING TOOL KIT FOR 0.25 TO 10 MM² PRE-INSULATED CABLE ENDS
LIFE
TIME
GUARANTEE
Contains:
• 1 adjustable crimping pliers BIZ 700 260 for interchangeable dies.
• 1 die for cable ends from 0.25 to 10 mm² (BIZ 700 261).

High crimping capacity for most current cable ends.
BIZ 700 271
Reference
ACCESSORY
STORAGE BOX FOR MOBILE CRIMP TOOL
Box with double foam inside.
Storage for crimping pliers and 10 dies.
BIZ 700 272
Reference
CRIMPING PLIERS FOR COPPER TERMINALS LUGS AND SLEEVES
CRIMPING PLIERS FOR COPPER TERMINAL LUGS AND SLEEVES
LIFE
TIME
GUARANTEE
Hexagonal crimping. Complies with NFC 20-130 (LCIE test report available on request).
Not suitable for crimping aluminium parts.
Jaw material: carbon steel chrome.
Handles material: plastic coated.
Applications
Section (mm²)
Length (mm)
BIZ 700 012
6/10/16/25/35/50
520
2
BIZ 700 013
6/10/16/25/35/50/70/95/120
660
3.5
ACCESSORY
(kg)
SET OF 2 SPARE DIES FOR COPPER TERMINAL LUGS AND SLEEVES
Supplied in pairs.
Dies material: carbon steel chrome finish.
Reference
Applications
Section (mm²)
BIZ 700 273
6/10/16/25/35/50
BIZ 700 274
6/10/16/25/35/50/70/95/120
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Reference
143
HAND TOOLS
WRENCHES
OPEN-END WRENCHES
OPEN-END WRENCHES
LIFE
TIME
GUARANTEE
Chrome Vanadium steel.
Polished chrome finish.
Dimensions (mm)
Length (mm)
BIZ 700 588
Reference
6x7
108
BIZ 700 589
8x9
121
BIZ 700 590
10 x 11
134
BIZ 700 591
12 x 13
151
BIZ 700 592
14 x 15
166
BIZ 700 593
16 x 17
184
BIZ 700 594
18 x 19
201
BIZ 700 595
20 x 22
216
BIZ 700 596
21 x 23
234
BIZ 700 597
24 x 26
253
SET OF 10 OPEN-END WRENCHES
LIFE
TIME
GUARANTEE
Dimensions:
6 x 7/8 X 9/10 x 11/12 x 13/14 x 15/16 x 17/18 x 19/20 x 22/21 x 23/24 x 26 mm.
Polished chrome finish. Reference
BIZ 700 488
POUCH OF 10 OPEN-END WRENCHES
LIFE
TIME
GUARANTEE
Dimensions:
6 x 7/8 x 9/10 x 11/12 x 13/14 x 15/16 x 17/18 x 19/20 x 22/21 x 23/24 x 26 mm.
Polished chromed finish.
Reference
144
BIZ 700 449
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
WRENCHES
COMBINATION WRENCHES
SINGLE COMBINATION WRENCHES
LIFE
TIME
GUARANTEE
Number of points: 12.
Reference
Dimensions (mm)
Length (mm)
BIZ 700 470
6
100
BIZ 700 160
7
110
BIZ 700 161
8
120
BIZ 700 162
9
130
BIZ 700 163
10
141
BIZ 700 164
11
151
BIZ 700 165
12
161
BIZ 700 166
13
171
BIZ 700 471
14
181
BIZ 700 472
15
191
BIZ 700 167
16
201
BIZ 700 168
17
212
BIZ 700 169
18
222
BIZ 700 170
19
231
BIZ 700 473
20
241
BIZ 700 474
21
251
BIZ 700 475
22
261
BIZ 700 476
23
272
BIZ 700 477
24
284
BIZ 700 478
25
300
BIZ 700 479
26
317
SET OF 8 COMBINATION WRENCHES
LIFE
TIME
GUARANTEE
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Dimensions: 8/9/10/11/12/13/17/19 mm.
BIZ 700 041
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
145
HAND TOOLS
WRENCHES
SOCKET WRENCHES
SINGLE SOCKET WRENCHES
LIFE
TIME
GUARANTEE
6 x 12 points.
Dimensions (mm)
Length (mm)
BIZ 700 116
Reference
6
107
BIZ 700 117
7
113
BIZ 700 118
8
121
BIZ 700 119
9
124
BIZ 700 120
10
130
BIZ 700 121
11
138
BIZ 700 122
12
143
BIZ 700 123
13
150
BIZ 700 124
14
163
BIZ 700 125
15
170
BIZ 700 126
16
179
BIZ 700 127
17
196
BIZ 700 128
18
203
BIZ 700 129
19
210
BIZ 700 304
20
218
BIZ 700 305
21
223
BIZ 700 306
22
225
BIZ 700 307
23
237
BIZ 700 308
24
246
BIZ 700 309
25
252
BIZ 700 310
26
259
SET OF 6 SOCKET WRENCHES
LIFE
TIME
GUARANTEE
Dimensions: 6/7/8/10/13/17 mm.
6 x 12 points.
Reference
146
BIZ 700 066
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
WRENCHES
RATCHET WRENCHES
SET OF 7 RATCHET WRENCHES
LIFE
TIME
GUARANTEE
Dimensions: 8/10/11/12/13/17/19 mm.
BIZ 700 191
REVERSIBLE RATCHET RING WRENCH 4 SIZES
LIFE
TIME
GUARANTEE
Dimensions: 10/13/17/19 mm.
Built-in reversing levers.
72 teeth mechanism.
5° increments.
Mirror finish.
Reference
BIZ 790 202
Dimensions (mm)
Length (mm)
10/13/17/19
230
(g)
290
LIFE
TIME
GUARANTEE
Dimensions: 10/13 mm.
Built-in reversing levers.
72 teeth mechanism.
5° increments.
Mirror finish.

15° angled heads for working in narrow sectors.
Reference
BIZ 790 007
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Dimensions (mm)
Length (mm)
10/13
150
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
(g)
80
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Reference
147
HAND TOOLS
WRENCHES
RATCHET SOCKET WRENCHES SETS
37-PIECES RATCHET SOCKET SET
LIFE
TIME
GUARANTEE
Set contains:
•
•
•
•
•
•
•
•
•
•
•
12 x 1/4" drive sockets (4/4.5/5/5.5/6/7/8/9/10/11/12/13).
7 Torx bits (T8/T10/T15/T20/T25/T30/T40).
4 Hex bits (3/4/5/6).
3 PZ bits (PZ1/PZ2/PZ3).
3 slotted bits (4/5.5/7).
3 PH bits (PH1/PH2/PH3).
1 x 1/4 " drive reversible ratchet wrench.
1 x 1/4 " drive universal joint.
1 x 1/4 " drive spinner handle.
1 x 1/4 " drive 150 mm extension.
1 x 1/4 " bit adapter.
Satin steel finish.
Reference
BIZ 700 078
38-PIECES THREADED ROD GO-THROUGH SOCKET SET
GUARANTEE
Set contains:
•
•
•
•
•
•
•
•
•
•
•
LIFE
TIME
13 x 1/4" drive sockets (4/4.5/5/5.5/6/7/8/9/10/11/12/13/14).
6 Torx bits (T10/T15/T20/T25/T30/T40).
4 Flat bits (3/4/5/6).
3 PH bits (1/2/3).
3 PZ bits (PZ1/PZ2/PZ3).
4 Hex bits (3/4/5/6).
1 x 1/4 " drive 75 mm extension.
1 hollow ratchet wrench.
1 x 1/4 " drive universal joint.
1 x 1/4 " drive spinner handle.
1 x 1/4 " bit adapter.
Satin steel finish.
Reference
148
BIZ 700 203
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
WRENCHES
ADJUSTABLE WRENCHES
ADJUSTABLE WRENCHES
LIFE
TIME
GUARANTEE
Burnished thumb wheel and head.
Reference
Jaw opening (mm)
Length (mm)
BIZ 700 183
26
150
155
BIZ 700 059
38.5
300
770
(g)
ADJUSTABLE RATCHET WRENCH
LIFE
TIME
GUARANTEE
Chrome Molybdenum steel.

Saves time.
Grip and shape makes it easy to use.
Reference
Jaw opening (mm)
Length (mm)
32
250
BIZ 700 598
(g)
565
HEXAGON KEYS
9 BALL-POINT HEX KEY CLIP SET
LIFE
TIME
GUARANTEE
Dimensions: 1.5/2/2.5/3/4/5/6/8/10 mm.
Supplied in a folding case for storage.
Anti-rust burnished.
Weight with sleeve: 430 g.
Easy tightening even in conﬁned spaces with long stem and ball point.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES

BIZ 700 230
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
149
HAND TOOLS
WRENCHES
HEXAGON KEYS
9 HEX KEY CLIP SET
LIFE
TIME
GUARANTEE
Dimensions: 1.5/2/2.5/3/4/5/6/8/10 mm.
Supplied in a folding case for storage.
Weight with sleeve: 430 g.
Reference
BIZ 700 063
7 HEX KEY FOLDING SET
LIFE
TIME
GUARANTEE
Dimensions: 2/2.5/3/4/5/6/8 mm.
Multi-component grip for comfortable use.
Weight: 300 g.
Reference
BIZ 700 298
8 TORX® KEY FOLDING SET
LIFE
TIME
GUARANTEE
Dimensions: T9/T10/T15/T20/T25/T27/T30/T40.
Multi-component grip for comfortable use.
Weight: 200 g.

A single recess for TORX® and RESISTORX® screws.
Reference
BIZ 700 299
ELECTRICAL CABINET KEYS
CONTROL CABINET KEY
LIFE
TIME
GUARANTEE
Containing:
•
•
•
•
Square (5, 6, 7-8 mm).
Triangle (9 mm).
Bit-key (3-5 mm).
1/4" flat bit (1.0 x 7 mm) and PH2.
Reference
150
BIZ 700 494
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
WRENCHES
UNIVERSAL KEY
LIFE
TIME
GUARANTEE
Containing:
•
•
•
•
•
Square (5, 6, 7-8 mm),
Triangle (7, 8-9 mm and 10-11 mm),
Bit-key (3-5 mm),
Half-moon (6 mm).
Central square 5 mm to bleed radiators.
With chain with a spring hook to attach it to the belt.
Reference
BIZ 790 194
ELECTRICIAN’S PEN-STYLE KEY
LIFE
TIME
GUARANTEE
Containing:
•
•
•
•
Square (5, 6, 7-8 mm).
Triangle (9 mm).
Bit-key (3-5 mm).
1/4" PH2 bit.
Bit storage in the body.
Reference
BIZ 700 495
WORKSITE'S PEN-STYLE KEY
LIFE
TIME
GUARANTEE
Containing:
•
•
•
•
Square (5, 8 mm),
Triangle (9 mm),
Stepped male square (6-9 mm),
1/4" PH2 bit.
Bit storage in the body.
Reference
BIZ 700 496
FOLDABLE CONTROL CABINET KEY
LIFE
TIME
GUARANTEE
Containing:
• Square (5/6/7-8 mm).
• Triangle (9 mm),
• Bit-key (3-5 mm),
Heads swivel over 360° on axis.
Supplied with PH2 head.

Magnetic heads and insert for all 1/4'' screw bits.
Fastening clip to keep the tool handy.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 790 201
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
151
HAND TOOLS
WRENCHES
CALIBRATION KEY FOR DIAZED DII-DIII FUSES
LIFE
TIME
GUARANTEE
For fitting and removing DIAZED DII and DIII calibration rings.
DII screw bit at one end of the key and DIII bits at the other.
Reference
BIZ 790 216
SWEDISH S WRENCH
LIFE
TIME
GUARANTEE
Swedish 1” S wrench in Chrome Vanadium steel.
Forged from solid steel, no welding.
3 contact points.
Reference
Length (mm)
BIZ 400 002
Jaw opening (mm)
(kg)
416
1.3
38
STILLSON WRENCH
LIFE
TIME
GUARANTEE
18'' pipe wrench with a double heated-treated forged upper jaw and a lower jaw with seat
relieving the strain on the fixing pin.
Hardened adjusting wheel, monoblock handle.

Double spring provides immediate grip and perfect ratchet action.
Reference
Length (mm)
BIZ 400 003
Jaw opening (mm)
(kg)
450
1.8
61
LIFE
TIME
GUARANTEE

Reference
152
Length (mm)
Opening Ø (mm)
BIZ 790 047
180
200
Self-adjustable
32
BIZ 790 048
250
390
Self-adjustable
40
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
(g)
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
CUTTING, SAWING AND FILING TOOLS
UTILITY KNIVES
18 MM AUTOMATICALLY RELOADING UTILITY KNIFE
LIFE
TIME
GUARANTEE
Supplied with 3 blades (1 mounted + 2 in handle storage).
Blade width 18 mm snaps into 8 sections.
Metal blade guide with built-in blade snapper.
Self-blocking blade.

Blade locking system on the back for difﬁcult jobs.
Automatic blade loading.
Excellent grip thanks to bimaterial handle.
BIZ 700 187
Reference
ACCESSORY
SET OF 10 BLADES FOR UTILITY KNIFE BIZ 700 187
Protection container with 10 blades.
Carbon steel.
Blade snaps into 8 sections.
Reference
BIZ 700 188
Quantity of blades
Blade width (mm)
Blade thickness (mm)
Length (mm)
10
18
0.5
100
25 MM LOCKING SCREW UTILITY KNIFE
LIFE
TIME
GUARANTEE
Supplied with 1 blade.
Carbon steel blade, width 25 mm, thickness 7 mm, 6 snap-off sections.
Plastic body with elastomer coating.
Stainless steel guide with built-in snapper.
Fitted with a screw to lock and release the blade.
BIZ 700 069
Reference
ACCESSORY
SET OF 10 BLADES FOR UTILITY KNIFE BIZ 700 069
Reference
BIZ 700 070
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Quantity of blades
Blade width (mm)
Length (mm)
10
25
0.7
126
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Supplied in protective case containing 10 blades.
Carbon steel.
Blade snaps into 6 sections.
153
HAND TOOLS
UTILITY KNIVES
RETRACTABLE UTILITY KNIFE WITH INTERCHANGEABLE BLADE
LIFE
TIME
GUARANTEE
Supplied with 1 trapezoidal blade.
Non-snapping 2-position trapezoidal blade.
Zinc alloy body.
Blade maintained when used by pressing the trigger.
Blade retracts when trigger is released at the end of application. BIZ 700 040
Reference
ACCESSORY
SET OF 10 TRAPEZOIDAL BLADES FOR UTILITY KNIFE BIZ 700 040
Supplied in protective case containing 10 blades.
Carbon steel.
Trapezoidal blade for use in both directions.
Non-snapping blades.
Reference
Quantity of blades
Blade width (mm)
Length (mm)
10
19
0.6
55
BIZ 700 178
SCISSORS AND SHEARS
ELECTRICIAN’S SCISSORS 22 MM² "CLASICO"
LIFE
TIME
GUARANTEE
Supplied with storage pouch.
For flexible aluminium or copper cables 22 m² maximum cross-section.
Ideally suited for cutting tapes or cabling clamps.
Carbon stainless steel notched blade.
Red fibre glass reinforced nylon handle.
Reference
BIZ 700 042
ELECTRICIAN’S SCISSORS 50 MM² "ULTIMA"
LIFE
TIME
GUARANTEE
Supplied with rigid plastic holster.
For flexible aluminium or copper cables 50 m² maximum cross-section.
Ideally suited for cutting tapes or cabling clamps.
Carbon stainless steel notched blade.
Reference
154
BIZ 790 042
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
SCISSORS AND SHEARS
ELECTRICIAN'S KNIFE
LIFE
TIME
GUARANTEE
2-blades knife (1 hooked and 1 straight).
Black ABS handle.
Reference
BIZ 700 115
BIZLINE 10 YEARS ELECTRICIAN'S KNIFE
LIFE
TIME
GUARANTEE
Supplied with suedine sheath.
Carbon steel folding blades (1 straight + 1 hooked).
Olive tree handle.

Reference
Genuine handcrafted according to French cutler's tradition.
BIZ 790 115
CABLE SNIPS "CROCO"
LIFE
TIME
GUARANTEE
For cutting electrical cables (type H07), tubes, wiring ducts and retainers, cardboard, etc.
42 mm toothed polished stainless steel blade.

Light and easy to use thanks to return spring.
Reference
BIZ 700 524
Length (mm)
(g)
190
120
CABLE SNIPS "CROCO MAX"
LIFE
TIME
GUARANTEE

Reference
BIZ 790 044
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Light and easy to use thanks to return spring.
Head angled by 25° for cutting comfort even in difﬁcult access locations.
2 cutting angle setting positions: 24 mm & 31 mm.
Built-in wire cutter notch to cut rigid wire up to 2.5 mm Ø without damaging the blade cutting edge.
Length (mm)
(g)
200
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
170
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
For easy cutting of small sections of flexible cables, small moldings, wiring ducts,
electric conduits, cardboard, etc.
Also cuts rigid wire up to 2.5 mm Ø.
50 mm toothed polished stainless steel blade.
155
HAND TOOLS
SCISSORS AND SHEARS
PVC PIPE SHEARS
LIFE
TIME
GUARANTEE
For cutting conduits suitable for PVC rigid or flexible conduit pipes and similar materials
(PP,PE and PB).
Max. cutting capacity 42 mm (tubes and conduits) and 40 x 12.5 (mini truncking).
Reinforced structure with 2 material handle.
Stainless steel blade.
Safety clips in closed position.
Reference
Length (mm)
BIZ 790 037
ACCESSORY
Reference
(g)
155
470
SPARE BLADE FOR PVC PIPE SHEARS BIZ 790 037
BIZ 790 038
METAL SHEARS
LIFE
TIME
GUARANTEE
Automatic opening ratchet and high demultiplication.
For cutting sheet metal and stainless steel (false ceilings, electrical cabinets).
For cutting 0.8 mm stainless steel and mild steel up to 1.2 mm thick.
Forged jaws in molybdenum chrome steel.
42 mm micro-toothed blades with HRC 59-62 hardness.
Reference
BIZ 700 211
STEEL CABLE SNIPS
LIFE
TIME
For cutting cables and wires 4 mm Ø maximum and spring steel of 1.5 mm Ø maximum.
Length: 190 mm.
Weight: 300 g.

Blades in SK5 steel alloy HRC 58-60 hardness for clean cutting of wires.
Reference
156
GUARANTEE
BIZ 700 303
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
SCISSORS AND SHEARS
BOLT CUTTER
LIFE
TIME
GUARANTEE
Tubular arm bolt cutters.
Jaws no.1.
Maximum capacity 10 mm Ø in 60 kg/mm² steel.
Polished finish jaws.
Length: 600 mm.
Weight: 2.8 kg.

Recessed bolts: reduced footprint against a classical model.
Bevelled jaw with end stop for optimum use of the blades.
BIZ 700 313
Reference
PUNCHES
SET OF 8 PG/ISO PUNCHES
LIFE
TIME
GUARANTEE
3-point cutting tips for easy cutting without rejects.
Contains the following cutters and screws:
•
•
•
•
•
•
•
•
•
•
15.2 mm/PG 9.
16.5 mm/ISO 16.
18.6 mm/PG 11.
20.4 mm/PG 13 and ISO 20.
22.5 mm/PG 16.
25.4 mm/ISO 25.
28.3 mm/PG 21.
32.5 mm/ISO 32.
1 x ball-bearing draw-in bolts MF 10 x 1.0 x 50 mm (BIZ 700 291).
1 x ball-bearing draw-in bolts MF 12 x 1.5 x 60 mm (BIZ 700 292).
Supplied with 30 g of cutting paste.
1 mm cutting capacity in stainless steel with M10 screw and 2 mm with M12 screw.
2 mm cutting capacity in sheet iron with M10 screw and 3 mm with M12 screw.
High carbon steel.
Quick, easy cutting without burrs.
Energy saving (Reduced by 67 %).
BIZ 700 294
Reference
ACCESSORY
CUTTING PASTE 30 G

Extends punch lifetime and helps drilling.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 700 293
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
157
HAND TOOLS
PUNCHES
ACCESSORY
BALL-BEARING DRAW-IN BOLTS
Reference
Length (mm)
BIZ 700 291
50
BIZ 700 292
60
ACCESSORY
Thread type
PG 9/ISO 16/PG 11/PG 13/ISO 20/PG 16/
ISO 25
Thread pitch
Drilling Ø (mm)
M10
10.5-11
PG 21/ISO 32
M12
12.5-13
SET OF PUNCHES
Supplied with ball-bearing draw-in bolt.
Reference
Ø (mm)
Thread type
BIZ 700 283
15.2
PG 9
BIZ 700 284
16.5
ISO 16
BIZ 700 285
18.6
PG 11
BIZ 700 286
20.4
PG 13 & ISO 20
BIZ 700 287
22.5
PG 16
BIZ 700 288
25.4
ISO 25
BIZ 700 289
28.3
PG 21
BIZ 700 290
32.5
ISO 32
SAWS
30 CM HACKSAW
LIFE
TIME
GUARANTEE
Supplied with 3 HSS bi-metal blades, 24 teeth per inch.
Cuts wood and metal.
Aluminium frame with elastomer handle.
Blade length: 300 mm.

45° and 90° cutting angles.
Blade tension adjustment.
BIZ 700 035
Reference
ACCESSORY
SET OF 10 SAW BLADES LENGTH 30 CM
HSS bi-metal, 24 teeth per inch.
Reference
BIZ 700 036
158
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Thickness (mm)
Length (mm)
Width (mm)
0.63
300
12.5
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
SAWS
PADSAW FOR DRYWALLS
LIFE
TIME
GUARANTEE
Carbon steel blade, 1.2 mm thick.
Wooden handle with suspension hole.
Length: 160 mm.
Reference
BIZ 700 175
ADJUSTABLE MINI-HACKSAW
Supplied with 1 HSS bi-metal blades, 25 teeth per inch.
Cuts wood and metal.
Steel frame.
Beech handle.
Blade length: 150 mm.

Handle adjustable in all positions.
Reference
BIZ 790 055
SET OF 12 SAW BLADES LENGTH 15 CM
Set of 12 saw blades.
HSS bi-metal, 25 teeth per inch.
Reference
Thickness (mm)
Length (mm)
Width (mm)
0.4
150
6
BIZ 790 056
STANDARD METAL FILES
TRIANGLE FILE 150 MM
LIFE
TIME
Reference
BIZ 700 507
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Shape
Type
Finish
Length (mm)
Triangular
Double cut
Second cut
150
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
(g)
160
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
GUARANTEE
159
HAND TOOLS
STANDARD METAL FILES
HALF-ROUND FILE 200 MM
LIFE
TIME
GUARANTEE
Reference
BIZ 700 082
Shape
Type
Finish
Length (mm)
Half-round
Double cut
Second cut
200
(g)
225
ROUND FILE 150 MM
LIFE
TIME
GUARANTEE
Reference
Shape
Type
Finish
Length (mm)
BIZ 700 083
Round
Double cut
Second cut
150
(g)
110
FLAT FILE 200 MM
LIFE
TIME
GUARANTEE
Reference
BIZ 700 315
Shape
Type
Finish
Length (mm)
Flat
Double cut
Second cut
200
(g)
195
SCANDINAVIAN CUTTING TOOLS
SWEDISH KNIFE
LIFE
TIME
GUARANTEE
Multiple use knife with extreme cutting edge.
Red and black bimaterial handle.
Reference
BIZ 700 439
160
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Length (mm)
Hardness (HRC)
(g)
230
100
58
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
STRIPPING KNIFE
LIFE
TIME
GUARANTEE
Blade shaped and sharpened for perfect stripping of electric cables.
Blue plastic handle.
Reference
Length (mm)
BIZ 700 447
Hardness (HRC)
(g)
140
100
58
PUNCH KNIFE
LIFE
TIME
GUARANTEE
Cable inserting knife for boxes, outlets, plastic lids.
Stainless steel blade.
Black plastic handle.
Reference
Length (mm)
BIZ 700 448
Hardness (HRC)
(g)
130
100
60
MULTI-FUNCTION SHEARS
LIFE
TIME
GUARANTEE
For cutting plastic (wiring ducts and retainers, etc.) electrical wires and cables,
rubber, leather, paper, etc.
Upper blade in SK5 steel, HRC 53-58.
Lower blade in S50C steel.
Reference
Length (mm)
BIZ 790 005
290
SPARE BLADE FOR SHEARS BIZ 790 005
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
ACCESSORY
(g)
215
BIZ 790 006
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
161
HAND TOOLS
HAMMER RANGE
HAMMERS
ELECTRICIAN'S HAMMER
LIFE
TIME
GUARANTEE
Reference
Head shape
Head Material
Length (mm)
BIZ 700 046
Electrician's
Forged steel
250
(g)
200
ENGINEER'S HAMMERS
Reference
Head shape
Head Material
Handle Material
Length (mm)
BIZ 700 047
Riveting
Forged steel
Hickory
280
500
BIZ 700 854
Riveting
Forged steel
Hickory
300
300
BIZ 700 855
Riveting
Forged steel
Hickory
320
500
(g)
CLUB HAMMERS
LIFE
TIME
GUARANTEE
Reference
Head shape
Head Material
Handle Material
Length (mm)
BIZ 700 075
Club
Forged steel
Hickory
260
1250
BIZ 700 856
Club
Forged steel
Hickory
260
1250
(g)
CLAW HAMMER
LIFE
TIME
GUARANTEE
Reference
BIZ 790 004
162
Head shape
Head Material
Handle Material
Length (mm)
Claw
Polished steel
Plastic coated steel
320
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
(g)
480
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
HAMMER RANGE
SHOCK TOOLS
MASON'S POINTED CHISEL
LIFE
TIME
GUARANTEE
Carbon steel.
Black oxide finish.
With safety guard.
Reference
Length (mm)
Width (mm)
300
100
BIZ 700 525
(g)
660
MASON'S COLD CHISEL TUBULAR SHAPE
LIFE
TIME
GUARANTEE
Carbon steel.
Black oxide finish.
With safety guard.
Reference
Length (mm)
Width (mm)
300
100
BIZ 700 584
(g)
670
MASON'S COLD CHISEL
LIFE
TIME
GUARANTEE
Flat profile.
Reference
Length (mm)
Width (mm)
300
29
BIZ 790 217
PRECISION CENTRE PUNCH
LIFE
TIME
GUARANTEE
Chrome-plated steel.
BIZ 700 073
AUTOMATIC CENTRE PUNCH
LIFE
TIME
GUARANTEE
Can be used on wood or metal.
Steel blade with polished finish.
Chrome-plated body.
Body Ø: 9.5 mm.
Stem Ø: 3 mm.
Length: 110 mm.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 700 397
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Reference
(g)
600
163
HAND TOOLS
HAMMER RANGE
SHOCK TOOLS
SCRIBER
LIFE
TIME
GUARANTEE
Polished steel.
Double-ended scriber.
Ø: 4 mm.
BIZ 700 396
Reference
FIXING TOOLS
STAPLER
LIFE
TIME
For low voltage round cables up to 6 mm Ø.
Examples: TV cables, networks, telecoms, alarms.
To power settings: 10 kg and 13.5 kg.
Can be used with staple leg lengths: 6, 10, 12 and 14 mm (BIZ 700 079 and BIZ 700 080).
Height of crown: 4 mm.
Weight: 845 g.
BIZ 700 068
Reference
ACCESSORY
GUARANTEE
STAPLES
Packed by carton of 1000.
Reference
Height (mm)
BIZ 700 079
12
BIZ 700 080
14
80 W GLUE GUN
Contains:
• Glue gun.
• Gun stand.
• 12 translucent glue sticks 11 mm Ø length 200 mm.
For gluing wood, plastic, fabric, synthetic foam, etc.
Maximum power: 80 W.
Temperature range: 120-193 °C.
Weight: 320 g.
Reference
164
BIZ 700 034
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
FIXING TOOLS
ACCESSORY
BAG OF 50 GLUE STICKS
Glue sticks 11 mm Ø and 200 mm length.
Tensile strength at 23 °C: 27 kg/cm².
Flow rate: 22 g/min.
Operating temperature dependent on viscosity: 170 °C (193 °C around the nozzle).
Temperature at which the glue becomes soft: 85 °C.
BIZ 700 033
Reference
SOLDER TOOLS
GAS SOLDERING IRON
LIFE
TIME
GUARANTEE
Equivalent power: 30-125 W.
Bit temperature: 250-550 °C.

Gas canister (38 ml for a use during 3 hours and a half average).
Blow torch function for heatshrink tubes; simply undo the metal ring.
BIZ 700 212
Reference
ACCESSORY
CONICAL TIP WITH 1.6 MM POINT
Tip 1.6 mm Ø.
BIZ 700 460
Reference
ACCESSORY
DEFLECTOR NOZZLE FOR HEATSHRINK SLEEVING
For heatshrink sleeving.
BIZ 700 462
Reference
SPARE JET
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
ACCESSORY
BIZ 700 464
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
165
HAND TOOLS
SOLDER TOOLS
BUTANE GAS REFILL
Highly flammable.

Special gas mixture for reﬁlling lighters and soldering irons.
Use upside down.
Reference
Net volume (ml)
BIZ 700 213
150
DUAL POWER SOLDERING IRON
LIFE
TIME
Supplied with straight bit 4 mm Ø, one sponge, solder (1 mm, Sn 99 % + Cu 1 %, 8 g) and a
stand.
Electronic and electrical work.
Equivalent power: 20/40 N/mm².
Power supply: 230 V.
Preheating: 7-10 minutes.
Maximum temperature for 20 W: 340 °C.
Maximum temperature for 40 W: 500 °C.
BIZ 700 489
Reference
ACCESSORY
GUARANTEE
STRAIGHT BIT FOR DUAL POWER SOLDERING IRON BIZ 700 489
Ø: 4 mm.
BIZ 700 457
Reference
DESOLDERING PUMP
LIFE
TIME
GUARANTEE
3
Capacity: 7.7 cm .
Metal body.
Nylon tip (ESD).
Electrical resistance: 10 5 Ω.
Tip withstands 200 °C.
Length: 195 mm.
Ø: 20 mm.

Biases static charges.
Protects fragile electronic components.
Reference
ACCESSORY
Reference
166
BIZ 700 461
SPARE TIP FOR BIZ 700 461
BIZ 700 463
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
SOLDER TOOLS
SOLDER ROLLS
Composition: Sn (tin) 99.3 % and Cu (copper) 0.7 %.
Reference
Thickness (mm)
(g)
BIZ 700 099
500
10/10 (1 mm)
BIZ 790 218
500
15/10 (1.5 mm)
BIZ 700 100
500
20/10 (2 mm)
MARKING TOOLS
WORKSITE PAINT SPRAYS
Temporary marking 9-10 months depending on the support types, application
conditions and UV exposure.
Fast drying, even on damp supports.
Particularly suited for use on the ceiling (BIZ 740 100).
Dries in 5 minutes.
Net volume: 500 ml.
Lifetime: 2 years stored in a dry place.

Environmentally friendly with over 25 % water content.
Safety cap preventing untimely activation and dripping (except BIZ 740 100).
BIZ 740 100 has a 360° multidirectional valve for all-angle marking.
Reference
Colour
BIZ 740 100
Fluo cherry red
BIZ 740 101
Fluo blue
BIZ 740 102
Fluo green
BIZ 740 103
Fluo yellow
BIZ 740 104
Fluo orange
BIZ 740 105
Non fluo white
MARKING LINE KIT

Supplied with a blue powder refill, 120 g.
Red ABS case with black handle.
Blue/white high strength polycotton line, 30 metres. 1 mm Ø.
Fast rewind 4/1 compared with classical marking line.
Handle may be disengaged: simple pressure on the handle shaft locks the line.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 700 037
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
167
HAND TOOLS
MARKING TOOLS
WORKSITE POWDERS
Finely-balanced sodium carbonate, sulphur and silica refills for maximum adhesion of the
powder to the line.
Cleans off with soapy water on non-porous surfaces.
Net weight: 120 g.

High density, non-volatile powder for a perfectly clear line.
Reference
Colour
Powder composition
Applications
BIZ 700 295
Yellow
Yellow iron oxide
Use internally on plasterboard before painting
BIZ 700 296
Red
Red iron oxide
Use outdoors
BIZ 700 038
Ultramarine
Sodium carbonate, sulphur and silica
For interior and exterior use
MARKING CHALKS
Box of 12 chalks.
For marking on metal, stone, dry and damp wood, tiles, plastic, asphalt, paper and
cardboard.
Ø: 12 mm.
Length: 120 mm.
Reference
Colour
BIZ 700 852
Red
BIZ 700 853
Yellow
JOINER'S PENCILS
For writing on wood, cardboard, paper, concrete.
Basswood.
HB lead.
Length: 180 mm.
Reference
Quantity
BIZ 790 002
1
BIZ 790 003
5
SPECIAL CABLE MARKING PEN
Indelible marker, quick drying, water and light resistant.
For writing on all types of material such as plastic, metal, glass, board.
Tip Ø 0.8 mm.
Reference
168
BIZ 700 399
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
MARKING TOOLS
BLACK CABLE MARKING PEN
Indelible marker, quick drying, water and light resistant.
For marking electrical cables, high precision mechanical components, cable ties and labels.
Tip Ø 0.75 mm.
BIZ 790 204
Reference
BLACK MARKER
Black indelible marker, water and light resistant.
Ideal for marking on white adhesive tape, plastic, stone, wood, metal, glass, etc.
Tip Ø 0.6 mm.
Reference
Quantity
BIZ 740 002
1
BIZ 740 001
4
KIWIPOINT MARKER
Black indelible marker, quick drying, water and light resistant.
All surfaces.
Stainless steel tip 25 mm.

Marking in difﬁcult access areas with its 25 mm tip.
BIZ 700 428
Reference
PICA DRY GRAPHITE LEAD PENCIL
Supplied with 1 graphite lead.
For marking and writing on all surfaces and materials. Ideal for surfaces which are rough,
dusty, humid, oily, dark, etc.
Telescopic lead pencil.
Lead protected by a cap.
Cap contains a sharpener.

Erasable marking on all smooth surfaces with damp cloth.
Ideal for drill holes and conﬁned spaces.
BIZ 790 214
Reference
ACCESSORY
SPARE LEADS FOR BIZ 790 214
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Box of 10 graphite leads.
BIZ 790 215
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
169
HAND TOOLS
MEASURING TOOLS
LEVELS
40 CM ALUMINIUM LEVEL
LIFE
TIME
GUARANTEE
3 vials: horizontal, vertical, and 45° angle.
Aluminium level.
Vials machined in shock-resistant acrylic.
Fluorescent liquid resistant to UV radiation.
Shock-proof end tips.
Graded upper sole.
Reference
BIZ 700 044
Length (cm)
Precision (mm/m)
40
0.5
(g)
250
25 CM MAGNETIC LEVEL
LIFE
TIME
GUARANTEE
3 vials: horizontal, vertical, and 45° angle.
Reinforced plastic body.

Dual-visibility of vertical leveling for easy and precise reading.
Base magnetic along the whole length for adhesion on metallic surfaces.
Reference
BIZ 700 206
Length (mm)
Precision (mm/m)
250
0.5
(g)
140
43 CM ELECTRICIAN'S LEVEL
LIFE
TIME
GUARANTEE
2 vials: horizontal and vertical.
Measuring and marking the drilling distance when fitting sockets and switches.
Aluminium level.
Marking of drill holes every 71 mm as per the DIN 49075 standard.
Compatible with all sizes of pencils thanks to the notches built into the upper sole
Reference
BIZ 700 381
Length (mm)
Precision (mm/m)
430
0.5
(g)
260
120 CM ELECTRICIAN'S LEVEL
LIFE
TIME
GUARANTEE
2 vials: horizontal and vertical.
Measuring and marking the drilling zone when fitting sockets and switches.
Aluminium level.
Compatible with all sizes of pencils thanks to the notches built into the upper sole
Reference
BIZ 700 383
170
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Length (mm)
Precision (mm/m)
1200
0.5
(g)
470
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
MEASURING TOOLS
LEVELS
ELECTRICIAN’S MAGNETIC POCKET LEVEL
LIFE
TIME
GUARANTEE
1 horizontal vial.
For the quick alignment of flush switches and sockets.
Plastic body.
Rare earth magnet.

Base plate allowing to position the level on the edge of switches or sockets.
Magnet 5 times more powerful than a typical ferrite magnet.
Reference
Length (mm)
Precision (mm/m)
70
1
BIZ 700 386
(g)
50
10 CM ELECTRICIAN'S POCKET LEVEL
LIFE
TIME
GUARANTEE
1 horizontal vial.
Aluminium level.
Vial machined in shock-resistant acrylic.
Fluorescent liquid resistant to UV radiation. Shock-proof end tips.

Reference
Length (mm)
Precision (mm/m)
100
0.5
BIZ 700 384
(g)
20
LASER LEVEL
YEARS
GUARANTEE
3 laser lines: horizontal, vertical, cross.
Supplied with storage pouch and instruction manual.
For the horizontal and vertical alignment of electrical sockets, switches, cables, pipes,
worktops, wall coverings, radiator brackets.
Shock-absorbing rubber casing.
1/4" threading (adapts to tripod BIZ 700 388).
Battery type 3 batteries 1.5 V AAA (not supplied).
Dimensions: 71 x 47 x 96 mm.
Weight: 455 g.

Compact, easy to put in a tool box.
Protection by silicon fairing.
Pendulum locking for transport. Reference
BIZ 700 276
Numbers of beams
Laser Class
Maximum span (m)
Precision (mm/m)
Unit of measure
Temperature in use (°C)
2
Class II
20
+/- 0.3/10
m/feet
-10/+45
FIBREGLASS FOLDING RULE
LIFE
TIME
GUARANTEE

Non-conductive metal ends.
EC III embossed graduations with red decimals.
Fibreglass reinforced folding polyamide rule.
Steel spring on each section.
10 sections.
Length: 2 m.
Width of sections:16 mm.
Reversed order graduations on the back for ease of reading.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 700 311
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
171
HAND TOOLS
MEASURING TOOLS
WOODEN FOLDING RULE
LIFE
TIME
GUARANTEE
Metal ends.
EC III embossed graduations with red decimals compliant with European standards.
Beech wood.
Steel spring on each section.
Transparent protective varnish.
10 sections.
Length: 2 m.
Width of sections 16 mm.
Thickness of sections: 2.4 mm.

Reversed order graduations on the back for ease of reading.
Reference
BIZ 700 427
MAGNETIC MEASURING TAPE
LIFE
TIME
GUARANTEE
Reinforced case in ABS reinforced with silicon.
Graduations on both sides. - Class II - CE Standard.
Anti-reflective, water-resistant, nylon-treated steel tape.
Magnetic tip.
Manual tape locking by slider button and automatic return.
Stainless steel screws.
Inside measurement by adding the casing size.
Belt clip.

Shock-resistant structure.
Magnetic tip for easier measurements.
Reference
Length (m)
Tape width (mm)
BIZ 790 040
3
16
BIZ 700 389
5
25
BIZ 790 041
8
25
LONG MEASURING TAPE
LIFE
TIME
GUARANTEE
Non-conductive, washable tape.
The case and mechanism can be dismantled.
ABS case with rubber handle.
Fibreglass tape -Class III (tolerance ± 20.6 mm in 50 m).
Steel rewind mechanism and crank.
Length: 50 m.

Ultra-fast rewind.
Return speed three times faster than an ordinary tape.
Reference
BIZ 700 205
STAINLESS STEEL RULE
LIFE
TIME
GUARANTEE
Length: 30 cm.
Metric measurement scale.
Reference
172
BIZ 700 505
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
MEASURING TOOLS
VERNIER CALIPER
LIFE
TIME
GUARANTEE
Supplied in protective box.
Inside, outside and depth measurement.
Capacity: 150 mm.
Precision: 1/20th mm.
Unit of measurement: metric and inches. BIZ 700 506
Reference
DIGITAL VERNIER CALIPER
LIFE
TIME
GUARANTEE
Supplied in protective box including one SR44 button cell.
LCD display.
Inside, outside and depth measurement.
Capacity: 150 mm.
Precision: 1/1000th mm.
Unit of measurement: metric and inches.
BIZ 700 398
JOINERS SQUARE
LIFE
TIME
GUARANTEE
th
Precision: 1/25 .
Reference
BIZ 700 395
LASER DISTANCE MEASURER
YEARS
GUARANTEE
Supplied with a transport cover, wrist strap, 9 V battery and instruction manual.
Measures lengths, areas and volumes.
Wavelength: 650 nm.
1/4" threading (adapts to tripod BIZ 700 388).
Battery type: 1 9 V battery (supplied).
Battery life: up to 5000 measurements.
Weight: 142 g.

With robust shock-absorbing casing.
Automatic switch-off for battery saving.
With spirit level for horizontal alignment.
Reference
BIZ 700 394
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Numbers of beams
Laser Class
Maximum span (m)
Precision (mm/m)
Unit of measure
Temperature in use (°C)
1
Class II
50
+/- 2/50
m/feet
0-40
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Reference
173
HAND TOOLS
MEASURING TOOLS
TRIPOD FOR LASERS BIZ 700 276 AND BIZ 700 394
1/4" thread.
Suitable for laser level BIZ 700 276 and laser distance measurer BIZ 700 394.
Reference
BIZ 700 388
ELECTRICAL INSPECTION AND TESTING DEVICES
SET OF TWO VOLTAGE TESTERS
LIFE
TIME
GUARANTEE
Set contains:
• 1 voltage tester 140 mm, 100-250 V.
• 1 voltage tester 190 mm, 100-250 V.
With pocket clip.
Reference
BIZ 700 031
SET OF 5 VOLTAGE TESTERS
LIFE
TIME
GUARANTEE
Set contains:
• 5 voltage testers 3 x 140 mm, 100-250 V.
With pocket clip.
Reference
BIZ 700 425
VOLTAGE DETECTOR
YEAR
Supplied with 2 1.5 V AAA batteries and instruction manual.
Checking the presence of AC voltage (230 V) in cables, outlets, switches, terminal boxes,
fuses without direct contact with the stripped connector.
Power surge category: CAT III 1000 V.
Voltage range: 50-1000 V.
Auto-test function.
Weight: 35.5 g.

»
Compact with pen format.
EN 61010-1
Reference
174
GUARANTEE
BIZ 780 010
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
VOLTAGE TESTER
YEAR
Automatic AC/DC detection, audible signal in AC.
Visual and audible indication for measuring lighting continuity in the work area.
Self-test function.
Supplied with two batteries and user manual.
Checking that a previously switched-off circuit is dead, measuring continuity and phase
rotation.
Display 15 LEDs.
Operating temperature: -10 °C to 55 °C.
Weight: 240 g.

»
Touch point may be changed from 4 mm to 2 mm.
Work zone lighting.
IEC 61243-3, EN 61010-1
Reference
BIZ 780 011
Safety standard
CAT III 1000 V/CAT IV 600 V
Voltage detection AC/DC (V)
12-690
Continuity (kΩ)
0-300
Test current (μA)
5
Frequency (Hz)
50/60
Rotary ﬁeld indication (V)
100-400
Response time
< 0.1 sec.
Protection index
IP 64
4000 PTS DIGITAL MULTIMETER
YEAR
Supplied with two measuring probes, one temperature probe, One 9 V battery and an
instruction manual.
Measures voltage, resistance and current.
Selection: auto and manual range.
Digital display and backlit screen.
Operating temperature: 0-50 °C.
Weight: 220 g.

GUARANTEE
Non-contact ACV detection.
Compact, easy to use.
Shock-resistant casing.
IEC 61010
Reference
BIZ 780 012
Safety standard
CAT III 600 V
Display (pts)
4000
Voltage DC (V)
600 (+/-0.5 %)
Voltage AC (V)
600 (+/-1.2 %)
Current DC (A)
10 (+/-2.5 %)
Current AC (A)
10 (+/-3 %)
Resistance range (MΩs)
40 (+/-0.8 %)
Diode check
Yes
Continuity buzzer
Yes/150 Ω
Capacity (μF)
100 (+/-3 %)
Temperature (K type thermocouple) (°C)
-20/760
Frequency (Mhz)
10 (+/-1.5 %)
Selection
Auto and manual range
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
»
GUARANTEE
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
175
HAND TOOLS
CLAMP METER
YEAR
Supplied with carry case, 2 1.5 V (AAA) batteries, two measuring probes and user manual.
Checking for the presence of load current, AC voltage and continuity.
Digital display counts 2000 pts.
Handle Ø: 26 mm.
Weight: 220 g.
»
GUARANTEE
IEC 61010
Reference
BIZ 780 013
Safety standard
CAT II 600 V / CAT III 300 V
Current AC (A)
2-400 (+/-1.5 % +5)
Voltage AC (V)
2-600 (+/-1.2 % +5)
Voltage DC (V)
0.2-600 (+/-0.8 % +1)
Resistance range (Ω)
200-20 M (+/-1 % +2)
Diode check
Yes
Continuity buzzer
Yes
ENDOSCOPIC CAMERA 1 METRE
YEARS
Waterproof wireless 9 mm inspection camera with detachable screen allowing to view up to
10 metres away from the point observed.
The colour monitor features a video recording and snapshot function.
The data can be transmitted to a PC via a micro SD card or by connecting to a USB port,
and can also be viewed on a TV screen using the AV cable.
GUARANTEE
Supplied in a carrying case with:
•
•
•
•
•
•
•
•
•
•
1
1
1
1
1
1
1
1
1
4
camera 9 mm x 1 m.
handle support.
3.5'' LCD monitor.
2GB micro SD card.
mains adapter.
accessories kit: magnet and mirror.
AV cable.
USB cable.
pull rod adapter.
AA batteries.
The ideal tool for inspecting electrical, mechanical, piping or ventilation and A/C installations.
With its 9 mm camera, the endoscope enters confined and dark spaces with its 4-LED builtin lighting system.
It also allows quick identification of any connection problem, objects obstructing cable
passage in conduits or hollow partitions, but also crawl spaces.
Recorded media can be added to inspection files but also be used as evidence in case of
disputes or as support for explanations to end clients.
A specific adapter allows to use the endoscope and pull rods with their accessories to
recover objects or pass cables.

Visual inspection of conﬁned and dark spaces.
Waterproof camera (IP 67) with 4-LED lighting system.
Detachable colour screen for wireless viewing up to 10 m.
Compatible with pull rods and their accessories.
Reference
ACCESSORY
Reference
176
BIZ 790 130
1 M EXTENSION CORD FOR ENDOSCOPIC CAMERA
BIZ 790 131
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
TOOL STORAGE
TOOL BAGS
TOOL BELT
15-compartment belt:
•
•
•
•
2
2
2
1
storage pockets for tools, each with five compartments.
pockets for screws and nails.
retention loops for electrician’s or riveting hammer.
tape measure clip.
Contents non-included.
600 denier polyester.
Reference
BIZ 700 228
LARGE TOOL BAG
Tool bag with large central pocket.
Reinforced floor and zip fastening.
Supplied with shoulder strap.
Reference
BIZ 700 226
Length (mm)
Width (mm)
Height (mm)
440
230
320
Length (mm)
Width (mm)
Height (mm)
420
205
264
"LA COSTABELLE" TOOL BAG
Reference
BIZ 700 229
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Supplied with shoulder strap.
Plastic floor.
Removable soft top.
With multiple inside/outside pockets.
Side fixing loops for bulky tools (levels, saws, drawings, etc.).
Small parts storage box.
With foam-covered steel carry handle.
177
HAND TOOLS
TOOL STORAGE
TOOL BOXES
STANDARD PLASTIC TOOL BOX
Including portable tote-tray.
Tool box with storage compartment for small parts in the lid
(plugs, screws, fastenings, etc.).
Material: polypropylene (PP).
Colour: black.
Reference
Height (mm)
Length (mm)
Depth (mm)
Lockable
BIZ 700 469
150
320
135
No
Maximum load (kg)
5
BIZ 700 484
200
400
180
Yes
8
ULTRA-STRONG PLASTIC TOOL BOX
Including portable tote-tray and 2 removable organisers.
Colour: black.

Tool box with two oragnisers for small parts in the lid (plugs, screws, fastenings, etc.).
Reference
Height (mm)
Length (mm)
Width (mm)
Lockable
Maximum load (kg)
260
518
275
Yes
30
BIZ 700 221
MULTI-STORAGE PLASTIC TOOL BOX
Tool box with two storage drawers and six compartments.
Including portable tote-tray.
Reference
BIZ 700 222
178
Length (mm)
Width (mm)
Height (mm)
Useful volume (l)
Lockable
Numbers of compartments
Material
Colour
474
239
248
27
Yes
6
Polypropylene
Red
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
TOOL STORAGE
TOOL BOXES
METAL TOOL BOX
Tool box with 5 compartments.
Material: in sheet steel.
Thickness: 8/10th.
Colour: red.
Reference
Height (mm)
Length (mm)
Width (mm)
200
450
200
BIZ 700 107
STORAGE CASE WITH 4 ORGANISERS
Storage case with carrying handle.
Including:
• 2 organisers with 12 compartments,
• 1 organiser with 14 compartments (BIZ 700 529),
• 1 organiser with 16 compartments.
Contents not included.

Can be ﬁxed to the wall.
Reference
Height (mm)
Length (mm)
Width (mm)
Numbers of plates
310
376
265
4
BIZ 700 220
ACCESSORY
(kg)
5
ORGANISER CASE 14 COMPARTMENTS
With 14 compartments.
U profile transparent lid.
Adapts to storage box BIZ 700 220.
Reference
BIZ 700 529
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Height (mm)
Length (mm)
Width (mm)
57
338
261
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
(kg)
0.86
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

179
HAND TOOLS
TOOL STORAGE
TOOL BOXES
With 15 compartments.
Body: grey polypropylene.
Lid: translucid U-shaped polycarbonate profile.
Reference
Height (mm)
Length (mm)
Width (mm)
79
413
330
Height (mm)
Length (mm)
Depth (mm)
325
315
140
Height (mm)
Length (mm)
Width (mm)
306
375
147
BIZ 700 223
(kg)
1.5
CARRYING PLASTIC DRAWER UNIT
15-drawer carry box with separators.
With carry handle.
Body and drawers: polypropylene.
Reference
BIZ 700 482
(kg)
0.4
FIXED METAL DRAWER UNIT
34-drawer fixed unit.
Free-standing or fixed (screws not included).
Body: metal.
Drawers: polypropylene.
Reference
BIZ 700 480
180
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
(kg)
3.3
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
TOOL STORAGE
TOOL CASES
PRIMO TOOL CASE
Including two tool-carrier panels.
Storage in reinforced fabric pockets and elastic bands.
Removable tool pallets and adaptable bottom storage.
Key lockable (set of two keys).
Black ABS shell.
Aluminium frame.
Multi-component handle.
Reference
BIZ 700 064
Height (mm)
Width (mm)
Length (mm)
190
350
470
(kg)
4.4
Maximum load (kg)
25
MASTER TOOL CASE
Including two tool pallets.
Storage in reinforced rubber racks and elastic bands.
Body in polypropylene plastic.
Aluminium frame.
High strength rubber carrying handle.

Polypropylene injection ensures constant body thickness while guaranteeing high shock
resistance.
The rubber blade racks ensure the tools are well maintained.
Reference
BIZ 790 502
Height (mm)
Width (mm)
Depth (mm)
380
470
215
(kg)
6
Maximum load (kg)
25
MASTER TROLLEY TOOL CASE

Polypropylene injection ensures constant body thickness while guaranteeing high shock
resistance.
The rubber blade racks ensure the tools are well maintained.
Reference
BIZ 790 503
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Height (mm)
Width (mm)
Depth (mm)
380
470
215
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
(kg)
6
Maximum load (kg)
25
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Tool case on wheels with telescopic handle.
Including two tool pallets.
Aluminium frame.
High strength rubber carrying handle.
181
HAND TOOLS
TOOL STORAGE
TOOL CASES
TECHNO ROLL TOOL CASE
Tool case on wheels with telescopic handle.
Including three tool pallets.
Removable upper pallet and adaptable bottom storage.
Black ABS shell.
Forged steel frame.
Metal carrying handle.
Reference
BIZ 790 504
Height (mm)
Width (mm)
Depth (mm)
410
485
250
(kg)
8.8
Maximum load (kg)
35
WORKSITE STORAGE BOX
Multiple storage rolling worksite box.
Supplied with portable tote-tray.
Volume: 105 l.
High strength rubber carrying handles.

Stackable (maximum load 100 kg).
Humidity and weather protection with injected bimaterial gasket.
Padlocking provision for securing on worksites.
Reference
BIZ 790 501
Height (mm)
Width (mm)
Depth (mm)
490
820
370
(kg)
8
Maximum load (kg)
50
STORAGE BOX WITH BUILT-IN LID
Volume: 65 l.
Material: recycled polypropylene.
Built-in lid.
Colour: anthracite grey.

Stackable boxes.
Reference
BIZ 700 520
182
Usable height (mm)
Useful length (mm)
Width (mm)
365
600
400
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
(kg)
3.5
Maximum load (kg)
66
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
TOOL SETS
ABS TOOL CASE SET - 17 ITEMS
Black ABS tool case (BIZ 700 064) including:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
cable tie plier (BIZ 700 010).
1000 V insulated slotted screwdriver 2.5 x 75 (BIZ 700 014).
1000 V insulated slotted screwdriver 3 x 100 (BIZ 700 015).
1000 V insulated PZ1 screwdriver 4.5 x 80 (BIZ 700 019).
1000 V insulated PZ2 screwdriver 6 x 100 (BIZ 700 020).
1000 V insulated stripping pliers 160 mm (BIZ 790 023).
1000 V insulated diagonal cutters 160 mm (BIZ 790 026).
1000 V insulated half-round long nose pliers 160 mm (BIZ 790 027).
1000 V insulated half-round long angled nose pliers 160 mm (BIZ 790 028).
electrician's scissors 22 mm² « CLASICO » (BIZ 700 042).
electrician's hammer (BIZ 700 046).
cable stripper knife with hooked blade (BIZ 790 008).
magnetic measuring tape 5 m (BIZ 700 389).
voltage detector (BIZ 780 010).
Reference
BIZ 700 096
PLASTIC TOOL BOX - 14 ITEMS
Plastic tool box (BIZ 700 221) including:
1
1
1
1
1
1
1
1
1
1
1
1
1
1
x
x
x
x
x
x
x
x
x
x
x
x
x
x
cable tie plier (BIZ 700 010).
1000 V insulated stripping pliers 160 mm (BIZ 790 023).
1000 V insulated diagonal cutter 160 mm (BIZ 790 026).
1000 V insulated half-round long nose pliers 160 mm (BIZ 790 027).
electrician's hammer (BIZ 700 046).
magnetic measuring tape 5 m (BIZ 700 389).
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
BIZ 700 227
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
183
HAND TOOLS
TOOL SETS
"LA COSTABELLE" TOOL BAG - 18 ITEMS
"La Costabelle" tool bag (BIZ 700 229) including:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1000 V insulated combination head screwdriver PZ1/slotted 1 x 75 (BIZ 700 486).
1000 V insulated combination head screwdriver PZ2/slotted 2 x 100 (BIZ 700 487).
1000 V insulated Chrome plated combination pliers 180 mm (BIZ 790 225).
1000 V insulated Chrome plated reinforced cutters 160 mm (BIZ 790 230).
1000 V insulated Chrome plated half-round long nose pliers 200 mm (BIZ 790 231).
set of 2 voltage testers (BIZ 700 031).
joiner’s pencil (BIZ 790 002).
wooden folding rule (BIZ 700 427).
mini-hacksaw (BIZ 700 314).
automatic stripping gun pliers 0.2 to 6 mm² (BIZ 790 017).
engineer’s hammer 300 mm (BIZ 700 854).
25 cm magnetic insulated level (BIZ 700 206).
Reference
BIZ 700 842
ABS TOOL CASE SET - 20 ITEMS
Black ABS tool case (BIZ 700 064) including:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1000 V insulated PH1 screwdriver 4.8 x 80 (BIZ 700 021).
1000 V insulated PH2 screwdriver 6 x 100 (BIZ 700 022).
Reference
184
BIZ 700 843
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HAND TOOLS
TOOL SETS
LEATHER TOOL CASE - 20 ITEMS
Leather tool case (BIZ 700 065) including:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1000 V insulated PH1 screwdriver 4.8 x 80 (BIZ 700 021).
1000 V insulated PH2 screwdriver 6 x 100 (BIZ 700 022).
BIZ 700 844
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
185
POWER TOOLS
AND
ACCESSORIES
186
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
DRILL/DRIVERS
P.188
SCREW BITS
P.190
ROTARY HAMMER
P.191
CORE DRILL
P.192
ANGLE GRINDER
P.195
WALL CHASER
P.196
VACUUM CLEANER
P.197
JIGSAW
P.198
HOT AIR GUN
P.199
DRILL BITS
P.200
HOLE SAWS
P.208
CUTTING DISCS
P.215
BLADES
P.217
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
187
DRILL/DRIVERS
CORDLESS DRILL/DRIVER 14.4 V/3 AH
YEARS
GUARANTEE
•
•
•
•
2
1
1
1
x 3.0 Ah Lithium-Ion batteries.
charger.
x 13 mm Ø QUIXS rapid-action chuck.
user manual.
Guarantee 2 years except accessories 6 months.

Compact design.
Light and powerful Lithium-Ion battery.
Robust with its cast aluminium gear casing.
Safe time with the QUICKS rapid-action chuck changing system.
Comfortable work with the battery charge lamp and work zone lighting.
Reference
BIZ VP1442
Battery Voltage
14.4 V/3 Ah Li-ion
First speed range (rpm)
0-360
Second speed range (rpm)
0-1500
Torque setting
21
Chuck (mm)
1.5-13
Maximum screw Ø in wood (mm)
10
Maximum drilling Ø in steel (mm)
13
Maximum drilling Ø in wood (mm)
38
Load time (min)
30
Maximum soft/hard torque (Nm)
35/55
Weight without/with chuck (kg)
1.6/1.9
ACCESSORY
QUIXS CHUCK FOR VP1442 DRIVER
Quick-change chuck for drills up to 13 mm Ø maximum.
Reference
ACCESSORY
Reference
ACCESSORY
Reference
ACCESSORY
BIZ 780 005
BATTERY CHARGER FOR VP1442 DRILL/DRIVER
BIZ 780 015
ANGLE DRILLING HEAD FOR BIZ VP1081 AND VP1442
BIZ 780 007
LITHIUM-ION BATTERY FOR VP1442 DRILL/DRIVER
14.4 V/3.0 Ah Lithium-Ion battery.
Reference
188
BIZ 780 014
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
DRILL/DRIVERS
CORDLESS DRILL/DRIVER 10.8 V/1.3 AH
YEARS
GUARANTEE
•
•
•
•
•
•
2
1
1
1
1
1
x 1.3 Ah Lithium-Ion batteries.
charger.
angle drilling head.
x 8 mm Ø QUIXS rapid-action chuck.
battery-powered LED lamp.
user manual.
Guarantee 2 years except accessories 6 months.

QUIXS chuck for screwing and drilling.
Screwdriver bit can be left in the holder even when the chuck is ﬁtted.
Drill driver 10.8 V battery compatible with LED lamp.
Powerful integrated LED for optimum lighting of the working area.
Reference
BIZ VP1081
Battery Voltage
10.8 V/1.3 AH Li-ion
No-load speed (rpm)
0-450
Torque setting
12
Chuck (mm)
0.8-8
20
8
6
Maximum soft/hard torque (Nm)
6/20
Load time (min)
30
0.8
(kg)
ACCESSORY
LITHIUM-ION BATTERY FOR VP1081 DRIVER
10.8 V/1.3 Ah Lithium-Ion battery.
BIZ 780 018
Reference
ACCESSORY
Quick-change chuck for drills up to 8 mm Ø maximum.
BIZ 780 020
Reference
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
ACCESSORY
BIZ 780 007
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
189
SCREW BITS
SCREW BITS
1/4" hex. fitting.
Reference
Tip
Length (mm)
Quantity
BIZ 781 012
PZ1
90
Set of 2
BIZ 781 013
PZ2
90
Set of 2
BIZ 781 014
PZ1
25
Set of 5
BIZ 781 015
PZ2
25
Set of 5
BIZ 781 006
Square
25
Set of 5
BIZ 781 005
Torx 25
25
Set of 5
BIZ 781 018
PH2 100 mm 1/4"
100
Set of 2
BIZ 781 016
PH2 25 mm 1/4"
25
Set of 2
BIZ 781 017
PH2 70 mm 1/4"
70
Set of 2
ACCESSORY
1/4" MAGNETIC BIT HOLDER
1/4" hex. fitting.
Reference
Length (mm)
BIZ 781 010
63
BIZ 781 011
100
SET OF 10 SCREW BITS + 1 BIT HOLDER
Composition:
•
•
•
•
2
4
4
1
x
x
x
x
slotted bits: 5.5/6.5.
PH bits: PH2 (3 pieces)/PH3.
PZ bits: PZ2 (3 pieces)/PZ3.
magnetic bit holder screw holder side and 1/4” hex. bits.
Supplied in a carry case.

Hands-free insertion of screws with the bit holder equipped with a magnetic washer to take and
hold a screw.
Automatic adjustment to the depth of the screw’s head to ensure screwing with no cam-out.
Set converts into repair screwdriver.
Reference
Numbers of bits
Material
Shank
10
Chrome vanadium steel
1/4" hex
BIZ 700 491
(g)
165
BELT SET OF 20 SCREW BITS
Composition:
•
•
•
•
•
•
5
5
5
5
1
1
x
x
x
x
x
x
slotted bits: 2.5/3/4/5/6 mm.
PH bits: PH1 (2 pieces)/PH2 (2 pieces)/PH3.
PZ bits: PZ1 (2 pieces)/PZ2 (2 pieces)/PZ3.
Torx bits: T10/T15/T20/T25/T30.
bit holder for the insertion and removal of 1/4” hex. bit, length 60 mm.
bit holder for 1/4” socket, length 50 mm.
Supplied in storage block with belt clip.
Reference
Numbers of bits
Material
Shank
20
1/4" 6 pans
BIZ 700 519
190
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
(g)
170
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
SCREW BITS
SET OF 32 SCREW BITS + 1 BIT HOLDER
Composition:
•
•
•
•
•
•
8
8
6
6
4
1
x
x
x
x
x
x
Hex. bits: 1.5/2/2.5/3/4/5/5.5/6.
Torx bits: T8/T10/T15/T20/T25/T27/T30/T40.
PZ bits: PZ0/PZ1 (2 pieces)/PZ2 (2 pieces)/PZ3.
PH bits : PH0/PH1 (2 pieces)/PH2 (2 pieces)/PH3.
slotted bits: 3/4/5/6.
magnetic bit holder for insertion and removal of 1/4” hex. bits.
Supplied in a flexible shock-resistant case.
Reference
BIZ 700 039
Material
Numbers of bits
Shank
32
1/4" 6 pans
(g)
225
DAMAGED SCREW EXTRACTOR
Hex shank fitting.
Remove non tempered screws with damaged head.
Box with 2 dimensions for 6 to 10 mm and 12 to 14 mm screws.
Tempered and quenched HSS steel.
Reference
BIZ 780 009
ROTARY HAMMER
ROTARY HAMMER 800 W WITH SDS+
YEARS
GUARANTEE
•
•
•
•
1
1
1
1
x
x
x
x
RAPID supply cable: 4 m.
2-component soft hand grip.
depth gauge.
user manual.
Accessories guaranteed 6 months.
Electronic switch for precise starting.
Clockwise/anti-clockwise direction of rotation.
Synchronised change between drilling and chiselling.
Motor winding shielded against dust
Exceptional power/weight ratio: 2.95 kg produces 3.2 J.
Reference
(kg)
BIZ MP800
2.95
Power (W)
800
Impact energy (J)
2.8
Hammer speed (shots/min)
4900
Speed when drilling without percussion (rpm)
0-1000
Speed when drilling with percussion (rpm)
0-900
40
13
Maximum drilling Ø in light alloys (mm)
16
Maximum drilling in reinforced concrete (mm)
26
8
Maximum hole saw Ø (mm)
68
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT

PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
191
ROTARY HAMMER
ACCESSORY
2-COMPONENT SOFT HAND GRIP FOR MP800
Supplied with depth gauge limiting the drilling depth.
For use on MP800 hammer.
BIZ 780 024
Reference
ACCESSORY
SDS+ ADAPTER SCREW FOR MP800
Adapter screw has 1/2" M16 thread on one end and an SDS+ fitting at the other end.

1/4" drive hex. bit holder hidden in the thread.
BIZ 780 031
Reference
ACCESSORY
KEYLESS CHUCK FOR MP800
Keyless chuck for cylindrical drill bits up to 13 mm max.
For use with adapter screw SDS+ BIZ 780 031.
BIZ 780 004
Reference
ACCESSORY
QUICK-ACTION LOCK POWER SUPPLY CABLE
Compatible with hammer MP800, angle grinder DQ1101 and jigsaw ST500.
Length: 6 m.

Cable equipped with an antikink reinforcement, reducing the need for repairs.
Click ﬁtting for changing tools.
Reference
Length (m)
BIZ 780 090
6
CORE DRILL
1800 W CORE DRILL
YEARS
GUARANTEE
Supplied in a carrying case with a tube of silicone and a user manual.
Horizontal or vertical drilling in all masonry weather.
Dry core drilling (ability to wet drill).
Use on the fly or on base for repetitive or heavy work.
1”1/4 external and 1/2” internal fitting.
Single speed by electronic variator:
Electronic cut-off in case of overloading.
Weight: 5.2 kg.

192
Micro-percussion system for faster drilling and longer lifetime of diamond core bits.
Immediate restart in case of machine stop.
Electronically managed slow start for easier drilling.
Reference
BIZ FO1800
Power (W)
1800
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CORE DRILL
1800 W CORE DRILL
Drilling capacity (mm)
30-200
Micro-hammer (shots/min)
28000
Drill speed (rpm)
1150
Maximum torque (Nm)
24
ACCESSORY
DIAMOND DRY CORE DRILL BITS
Dry core drill bits.
Laser-welded segments for better resistance to tear-out.
Height of segments 10 mm.
1" 1/4 fitting.
Each core drill is supplied with a centering ring, to drill without support.
For all masonry materials: concrete, construction blocks, brick, etc.
Reference
Ø (mm)
Length (mm)
BIZ 782 040
82
400
BIZ 782 041
112
400
BIZ 782 042
132
400
BIZ 782 044
164
400
BIZ 782 043
202
300
ACCESSORY
COPPER PASTE
Facilitates the core drill bit removing.
Net weight: 20 g.
BIZ 782 046
Reference
ACCESSORY
CENTERING SHAFT FOR CORE DRILL BIZ FO1800
Ensures that drilling by hand is completely safe.
Retractable centre point shaft.
Installed on core drills with a max length of 400 mm.
BIZ 782 045
Reference
ACCESSORY
CENTERING RINGS
Reference
Ø (mm)
BIZ 782 025
82
BIZ 782 026
112
BIZ 782 027
132
BIZ 782 028
202
BIZ 782 029
164
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Maintains the axis at the centre of the crown.
Always use with the centering axis BIZ 782 045.
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
193
CORE DRILL
ACCESSORY
DRILL STAND FOR CORE DRILL BIZ FO1800
For all repetitive or heavy drilling.
Supplied with fixings.
To be used with the BIZ core drill BIZ FO1800.
For water or dry core drilling.
Core drilling Ø: 82-202 mm.
Weight: 13.7 kg.
Reference
ACCESSORY
BIZ 782 048
LOT OF 5 PLUGS AND FIXINGS FOR DRILL STAND
Kit composed of 5 M12 heavy duty plugs, one fixing rod and a locking nut.
Drilling Ø: 16 mm.
Reference
ACCESSORY
BIZ 782 049
FIXING PLUG FOR CORE DRILL STAND
M12 heavy duty fixing plug.
Drilling Ø: 16 mm.
Reference
ACCESSORY
Reference
194
BIZ 782 052
ADAPTER FOR EXTERNAL WATER SUPPLY FOR BIZ FO1800
BIZ 782 047
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CORE DRILL
ACCESSORY
WATER PUMP 8 L
BIZ 782 060
Reference
ACCESSORY
WATER COLLECTOR
Composition:
• Drill guide with drain hose.
• Rubber cap to be cut to the core's dimensions (BIZ 782 062).
Only in the case if water drilling on stand.
BIZ 782 061
Reference
ACCESSORY
RUBBER CAP UP TO Ø 200 MM
Reference
BIZ 782 062
ANGLE GRINDER
ANGLE GRINDER 1100 W
YEARS
GUARANTEE
•
•
•
•
•
1 x 4 m quick-action power supply cable.
2-component soft hand grip.
1 x face spanner.
1 x tightening nut.
1 x user manual.
Special winding protection for the motor.
Protective cover can be swivelled without using any tools.
No electronic variator.
Gear housing in aluminium.
Reference
BIZ DQ1101
Power (W)
1100
No-load speed (rpm)
1100
Discs Ø
125
Grinding spindle thread
(kg)
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES

M14
2.2
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
195
ANGLE GRINDER
ACCESSORY
FACE SPANNER
BIZ 780 061
Reference
ACCESSORY
TIGHTENING NUT
BIZ 780 062
Reference
ACCESSORY
Length: 6 m.

Reference
Length (m)
BIZ 780 090
6
WALL CHASER
WALL CHASER 1800 W
YEARS
GUARANTEE
Supplied in a steel carrying case with:
• 2 x 15 mm Ø diamond dry cutting discs for hard and very hard materials, fitted adjusted to
30 mm wide and 30 mm deep.
• 1 x 13/17 flat spanner.
• 1 x tommy bar for fitting and removing discs.
• 1 x user manual.
Can be used with vacuum cleaner BIZ AD1400.
For dry cutting in concrete, brick, stone, sandstone/limestone, etc.
Heavy duty.
Electronic variator:
Automatic stop in case of overloading or locking.
Weight: 5.6 kg.

196
Electronic variator: immediate re-start after shutdown.
Electronic slow start for easier handling.
Reference
BIZ RD1800
Power (W)
1800
No-load speed (rpm)
7800
Disc Ø (mm)
150
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
WALL CHASER
WALL CHASER 1800 W
Maximum groove depth (mm)
7-45
Maximum groove width (mm)
7-35
Mains cable length (m)
3.85
Acoustic power (dB)
100
VACUUM CLEANER
VACUUM CLEANER 1400 W
YEARS
GUARANTEE
Supplied with:
• 2 x fitted, high-strength, pleated polyester dust filters.
• 1 x 38 mm Ø suction hose, 5 metres long.
• 1 x user manual.
• Wet and dry vacuum cleaner.
• Suction of drilling and cutting dust.
• Site cleaning.
Automatic cleaning by electromagnetic unblocking.
Integrated power socket for connecting power tools (RD1800 wall chaser, FO1800 core drill).
Reference
BIZ AD1400
Power (W)
1400
Maximum suction power (L/sec)
61
Maximum vacuum (mbar)
248
Usable tank capacity (L)
20
Mains cable length (m)
8
Dimensions (mm)
570 x 400 x 420
12.7
(kg)
ACCESSORY
SET OF TWO DUST FILTERS FOR BIZ AD1400
BIZ 780 051
Reference
ACCESSORY
SET OF FIVE DISPOSABLE PAPER BAGS
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES

BIZ 780 052
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
197
VACUUM CLEANER
ACCESSORY
SUCTION HOSE Ø 38 MM LENGTH 5 M
BIZ 780 053
Reference
ACCESSORY
ACCESSORY KIT FOR BIZ AD1400
Composition:
•
•
•
•
•
1
1
1
1
1
x
x
x
x
x
chrome steel bent tube
chrome steel straight tube.
dust brush.
water suction brush.
suction nozzle.
Reference
BIZ 780 054
CONICAL CONNECTING PIECE FOR BIZ AD1400
Outer connecting piece Ø 40 mm and inner Ø 35 mm suitable for HILTI® machines.
Reference
BIZ 780 050
JIGSAW
JIGSAW 500 W
YEARS
GUARANTEE
•
•
•
•
•
1
1
1
1
1
x
x
x
x
x
parallel guide.
4 m quick-action lock power supply cable.
anti-splinter guard for sawplate.
blade with 74 mm cutting length for quick coarse cutting.
user manual.

198
X-male click keyless saw blade change.
Sawplate adjustable to 22.5° and 45°.
Dust screen and speed adjustment for the material to be cut makes for safe working.
Keep the site clean with the 35 mm connector for a vacuum cleaner hose.
Reference
BIZ ST500
Power (W)
500
No-load speed (rpm)
3400
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
JIGSAW
JIGSAW 500 W
Speed setting range (rpm)
600-3400
Stroke height (mm)
19
Wood cutting capacity (mm)
80
Metal cutting capacity (mm)
5
Bevel cutting (mm)
22.5° and 45°
Setting the pendulum
3 settings
1.7
(kg)
ACCESSORY
Length: 6 m.

Reference
Length (m)
BIZ 780 090
6
HOT AIR GUN
HOT AIR GUN 1600 W
YEARS
GUARANTEE
• For heating heatshrink tubes plastic and rubber sleeves.
• For plumbing work (soldering copper tubing).
• For stripping paint from wood.
Ceramic heating element for prolonged use.
Electronic temperature adjustment between 80 and 600°C for precision working.
Stand for static use.
Hot air lock-on button for continuous operation at a constant temperature.
Reference
BIZ SD1600
Power (W)
1600
Air ﬂow (L/min)
(kg)
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES

400
0.7
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
199
DRILL BITS
SDS+ HAMMER DRILL BITS "XTREME" 4 CUTTING
EDGES - UNITS

Reference
• One-piece carbide tip with four cutting edges.
• Centring point.
• Quadruple helix and cylindrical body for quick removal of dust.
Ø (mm)
Total length (mm)
Useful length (mm)
BIZ 700 650
5
110
50
BIZ 700 651
5
160
100
BIZ 700 657
5.5
110
50
BIZ 700 658
5.5
160
100
BIZ 700 652
6
110
50
BIZ 700 653
6
160
100
BIZ 780 072
6
210
150
BIZ 780 077
6
260
200
BIZ 780 070
7
160
100
BIZ 700 654
8
110
50
BIZ 700 655
8
160
100
BIZ 780 073
8
210
150
BIZ 780 078
8
260
200
BIZ 780 082
8
450
400
BIZ 700 656
10
160
100
BIZ 780 074
10
210
150
BIZ 780 079
10
260
200
BIZ 780 083
10
450
400
BIZ 780 071
12
160
100
BIZ 780 075
12
210
150
BIZ 780 080
12
260
200
BIZ 780 084
12
450
400
BIZ 780 076
14
210
150
BIZ 780 081
14
260
200
BIZ 780 085
14
450
400
BIZ 780 086
18
450
400
BIZ 780 087
20
450
400
BIZ 780 088
22
450
400
BIZ 780 089
25
450
400
SDS+ HAMMER DRILL BITS 2 CUTTING EDGES - UNITS

Two cutting-edge carbide tip.
Centring point.
Quick removal of dust.
Direct transmission of the hammer energy to the drilling tip.
Reference
BIZ 700 601
200
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Ø (mm)
Total length (mm)
Useful length (mm)
4
110
50
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
DRILL BITS
Ø (mm)
Total length (mm)
BIZ 700 602
5
110
50
BIZ 700 603
5
160
100
BIZ 700 646
5.5
110
50
BIZ 700 647
5.5
160
100
BIZ 700 604
6
110
50
BIZ 700 605
6
160
100
BIZ 700 648
6
210
150
BIZ 700 606
6
260
200
BIZ 700 607
6
310
250
BIZ 700 608
7
160
100
BIZ 700 609
7
260
200
BIZ 700 610
8
110
50
BIZ 700 611
8
160
100
BIZ 700 612
8
210
150
BIZ 700 613
8
260
200
BIZ 700 614
8
310
250
BIZ 700 615
8
450
400
BIZ 700 616
10
160
100
BIZ 700 617
10
210
150
BIZ 700 618
10
260
200
BIZ 700 619
10
310
250
BIZ 700 620
10
450
400
BIZ 700 621
12
160
100
BIZ 700 622
12
210
150
BIZ 700 623
12
260
200
BIZ 700 624
12
310
250
BIZ 700 625
12
450
400
BIZ 700 626
12
600
550
BIZ 700 627
12
1000
950
BIZ 700 628
14
160
100
BIZ 700 629
14
210
150
BIZ 700 630
14
260
200
BIZ 700 631
14
450
400
BIZ 700 632
15
260
200
BIZ 700 633
16
210
150
BIZ 700 634
16
260
200
BIZ 700 635
16
450
400
BIZ 700 636
16
600
550
BIZ 700 637
18
210
150
BIZ 700 638
18
450
400
BIZ 700 639
20
210
150
BIZ 700 640
20
260
200
BIZ 700 641
20
450
400
BIZ 700 642
20
600
550
BIZ 700 643
22
450
400
BIZ 700 644
24
450
400
BIZ 700 645
26
450
400
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
Useful length (mm)
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Reference
201
DRILL BITS
SDS+ HAMMER DRILL BITS 2 CUTTING EDGES - SETS
Reference
BIZ 700 680
Ø (mm)
5
Total length (mm)
110
Useful length (mm)
50
Quantity
10
BIZ 700 687
5.5
110
50
10
BIZ 700 681
6
110
50
10
BIZ 700 682
6
160
100
10
BIZ 700 683
8
110
50
10
BIZ 700 684
8
160
100
10
BIZ 700 685
10
160
100
10
BIZ 700 686
12
160
100
5
SDS+ HAMMER DRILL BITS SET - 7 ITEMS
2 cutting edges.
Composition of Ø:
•
•
•
•
•
•
•
5 x 110 mm.
6 x 110 mm.
6 x 160 mm.
8 x 110 mm.
8 x 160 mm.
10 x 160 mm.
12 x 160 mm.
Reference
BIZ 700 196
Packaging type
Numbers of drill bits
Metal box
7
SDS-MAX HAMMER DRILL BITS - UNITS
For efficient drilling in hard and very hard materials such as concrete, reinforced concrete,
natural stone and masonry

Carbide tip with four cutting edges at 130° cutting angle.
Centring point.
Quadruple helix and cylindrical body for quick removal of dust.
Reference
202
Ø (mm)
Total length (mm)
Useful length (mm)
Head type
BIZ 700 660
14
540
400
2 cutting edges
BIZ 700 661
16
340
200
4 cutting edges
BIZ 700 662
16
540
400
4 cutting edges
BIZ 700 663
18
540
400
4 cutting edges
BIZ 700 664
20
520
400
4 cutting edges
BIZ 700 665
22
520
400
4 cutting edges
BIZ 700 666
22
920
800
4 cutting edges
BIZ 700 667
25
520
400
4 cutting edges
BIZ 700 668
25
920
800
4 cutting edges
BIZ 700 669
30
570
450
4 cutting edges
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
DRILL BITS
Reference
Ø (mm)
Total length (mm)
Useful length (mm)
Head type
BIZ 700 670
32
920
800
4 cutting edges
BIZ 700 671
35
570
450
4 cutting edges
Shank Ø (mm)
POINTED AND FLAT CHISELS
Reference
Shank
Designation
Total length (mm)
BIZ 700 690
SDS-Max
Pointed chisel
400
18
BIZ 700 691
SDS-Max
Flat chisel
400
18
BIZ 700 692
SDS+
Pointed chisel
250
10
BIZ 700 693
SDS+
Flat chisel
250
10
CYLINDRICAL MULTI-MATERIAL DRILL BITS - UNITS
Ideal for tiles, ceramics, porcelain, marble, masonry, metal, wood and plastic.
Cylindrical shank.
Carbide tips sharpened on diamond grinding wheel.
Red polished helix and flute.

Longer drill bits to drill through different materials in a single operation and with a single drill
bit.
Reference
Ø (mm)
Total length (mm)
Useful length (mm)
BIZ 700 742
5
150
85
BIZ 700 744
6
150
85
BIZ 700 746
8
200
135
BIZ 700 748
10
200
135
BIZ 700 749
12
220
150
BIZ 700 750
14
220
150
BIZ 700 753
5.5
150
85
HEX. SHANK MULTI-MATERIAL DRILL BITS - UNITS
Reference
Ø (mm)
Total length (mm)
Useful length (mm)
BIZ 700 740
4
88
39
BIZ 700 741
5
99
39
BIZ 700 743
6
114
54
BIZ 700 745
8
120
80
BIZ 700 747
10
120
80
BIZ 700 752
5.5
99
39
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Ideal for tiles, ceramics, porcelain, marble, masonry, metal, wood and plastic.
Hexagonal shank.
Carbide tips sharpened on diamond grinding wheel.
Polished helix and flute.
203
DRILL BITS
HEX. SHANK MULTI-MATERIAL DRILL BITS SET - 5 ITEMS
Box contains the following Ø: 4/5/6/8/10 mm.
Hexagonal shank.
Two cutting-edge carbide tip.
Polished helix and flute.
Reference
BIZ 700 751
CYLINDRICAL HSS METAL DRILL BITS
For drilling copper, brass, nickel, zinc and plastics.
Particularly suitable for 600 N/mm² carbon steels, standard 800 N/mm² steels and standard
900 N/mm² steel alloys.
Not suitable for drilling in stainless steel.
Cylindrical shank.
Monoblock head.
Helix angle between 23° and 33°.

Its construction and ﬂared shape offer several advantages:
•
•
•
•
No blocking in the tool.
Less friction.
Extended life time.
Excellent elasticity.
Reference
204
Ø (mm)
Total length (mm)
Useful length (mm)
BIZ 700 701
1
34
12
Quantity
Set of 3
BIZ 700 702
1.5
40
18
Set of 3
BIZ 700 703
2
49
24
Set of 3
BIZ 700 704
2.5
57
30
Set of 3
BIZ 700 705
3
61
33
Set of 3
BIZ 700 706
3.2
65
36
Set of 3
BIZ 700 707
3.3
65
36
Set of 3
BIZ 700 708
3.5
70
39
Set of 3
BIZ 700 709
4
75
43
Set of 2
BIZ 700 710
4.2
75
43
Set of 2
BIZ 700 711
4.5
80
47
Set of 2
BIZ 700 712
4.8
86
52
Set of 2
BIZ 700 713
5
86
52
Set of 2
BIZ 700 714
5.5
93
57
Set of 2
BIZ 700 715
6
93
57
Set of 2
BIZ 700 716
6.5
101
63
Per unit
BIZ 700 717
7
109
69
Per unit
BIZ 700 718
7.5
109
69
Per unit
BIZ 700 719
8
117
75
Per unit
BIZ 700 720
8.5
117
75
Per unit
BIZ 700 721
9
125
81
Per unit
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
DRILL BITS
Reference
Ø (mm)
Total length (mm)
Useful length (mm)
Quantity
BIZ 700 722
9.5
125
81
Per unit
BIZ 700 724
10
133
87
Per unit
BIZ 700 725
10.5
133
87
Per unit
BIZ 700 726
11
142
94
Per unit
BIZ 700 727
11.5
142
94
Per unit
BIZ 700 728
12
151
101
Per unit
BIZ 700 729
13
151
101
Per unit
CYLINDRICAL SHANK HSS METAL DRILL BITS SET - 10 ITEMS
Box contains the following Ø: 1/2/3/4/5/6/7/8/9/10 mm.
For drilling copper, brass, nickel, zinc and plastics.
Not suitable for drilling in stainless steel.
Reference
BIZ 700 723
CYLINDRICAL SHANK METAL HSS DRILL BITS SET - 19 ITEMS
Al
Cu
Kit comprising Ø from 1 to 10 in steps of 0.5 mm.
For drilling alloy and non-alloy steels, cast iron, aluminium, copper, brass and bronze.
Reference
BIZ 700 757
CYLINDRICAL SHANK HSS METAL 5 % COBALT DRILL BITS SET - 25 ITEMS
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Box contains Ø 1 to 13 mm in steps of 0.5 mm.
For all metals including stainless steel.
Cylindrical shank.
HSS 5 % cobalt drills.
BIZ 700 194
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
205
DRILL BITS
ISO AND PG STEP DRILL BIT
Compatible with PG and ISO.
Laser marked steps.
Three flats milled on Ø 10 mm shank to prevent slipping in the chuck.
Drills through meta sheet up to 2 mm thick.
For drilling non-ferrous metals, stainless steel and synthetic materials up to 4 mm thickness.
Hexagonal shank 10 mm Ø.
5 % cobalt HSS steel.
Helix flutes.
Cross shaped sharpening.

Fast chip evacuation by helix ﬂute increases cutting capacity.
5 % cobalt steel for constant drilling temperature and for long life.
Drilling accuracy with offset point.
Reference
Shank Ø (mm)
Hardness (HRC)
Numbers of floors
10
65-66
13
BIZ 700 095
8 MM Ø SIDE CUTTING BIT
For non-ferrous metals, sheet metal, copper, brass, nickel, zinc, construction wood,
chipboard, plasterboard, plastics.
Perfect for drilling irregular holes without limit to their shape, using the deep cutting teeth.
TiN (titanium nitride) HSS drill bit.
Cylindrical shank.
Tip angle 118°.
Sharpened cross-shape tip.
Reference
Ø (mm)
Total length (mm)
Useful length (mm)
Quantity
8
93
57
Per unit
BIZ 700 700
SET OF 7 TAPS + 7 DRILLS
Contains:
• 7 taps: M3/M4/M5/M6/M8/M10/M12.
• 7 drills: 2.5/3.3/4.2/5/6.8/8.5/10.2 mm.
• 1 tap wrench.
Precision shaped and sized, milled, self-centring HSS drills with accurate dimensions to
produce the tapping holes.
For steel, cast iron, light alloys.
Reference
206
BIZ 700 180
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
DRILL BITS
HEX. SHANK WOOD SPADE DRILL BITS
Ideal for drilling hard and soft wood.
Possibility of producing curved holes for conduits, tubes and cables.
Hexagonal shank.
Re-sharpenable bits.
Total length: 152 mm.
Useful length: 112 mm.

Their self-centring, threaded point with two chip breakers makes drilling a quick operation.
Lasts three times longer than a standard wood bit.
Reference
Ø (mm)
Quantity
BIZ 700 440
13/18/22/28/35/40
Set of 6
BIZ 700 441
13
Per unit
BIZ 700 442
18
Per unit
BIZ 700 443
22
Per unit
BIZ 700 444
28
Per unit
BIZ 700 445
35
Per unit
BIZ 700 446
40
Per unit
BIZ 700 800
6
Per unit
BIZ 700 802
10
Per unit
BIZ 700 822
10
Per unit
BIZ 700 803
12
Per unit
BIZ 700 823
12
Per unit
BIZ 700 826
16
Per unit
BIZ 700 806
17
Per unit
BIZ 700 827
17
Per unit
BIZ 700 828
18
Per unit
BIZ 700 808
20
Per unit
BIZ 700 830
20
Per unit
BIZ 700 831
22
Per unit
BIZ 700 835
28
Per unit
BIZ 700 820
6
Per unit
BIZ 700 805
16
Per unit
BIZ 700 824
13
Per unit
BIZ 700 838
35
Per unit
BIZ 700 841
40
Per unit
CYLINDRICAL SHANK WOOD DRILL BITS SET - 7 ITEMS
Contains:
• 5 HSS 3-point drills Ø 5/6/8/10/12 mm.
• 2 HSS milling drills Ø 12.4/16.5 mm.
Cylindrical shank.
Land, shank and flute polished.
Three-point drills: one centring point and two cutting points.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 700 755
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
207
DRILL BITS
CUTTING SPRAY 50 ML
Before drilling, for easier entry into hard-to areas.
During drilling to control the rise in temperature of hole saws and the material.

Extends hole saws, pilot drills and metal drills life.
Reference
Net volume (ml)
BIZ 700 414
50
HOLE SAWS
BI-METAL 8 % COBALT HOLE SAWS - STANDARD
BI-METAL 8 % COBALT HOLE SAWS STANDARD - UNITS
Supplied without shaft.
To drill steel, stainless steel, wood, metal and plastic.
Reference
208
Ø (mm)
BIZ 700 863
16
BIZ 700 864
17
BIZ 700 865
19
BIZ 700 866
20
BIZ 700 867
21
BIZ 700 868
22
BIZ 700 869
25
BIZ 700 870
29
BIZ 700 871
32
BIZ 700 872
33
BIZ 700 873
38
BIZ 700 874
40
BIZ 700 875
41
BIZ 700 876
48
BIZ 700 877
51
BIZ 700 878
54
BIZ 700 879
57
BIZ 700 880
60
BIZ 700 881
63
BIZ 700 882
64
BIZ 700 883
65
BIZ 700 884
67
BIZ 700 885
68
BIZ 700 886
70
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HOLE SAWS
Reference
Ø (mm)
BIZ 700 887
73
BIZ 700 888
76
BIZ 700 889
79
BIZ 700 890
80
BIZ 700 415
83
BIZ 700 891
86
BIZ 700 416
92
BIZ 700 417
95
BIZ 700 418
100
BIZ 700 892
102
BIZ 700 893
105
BIZ 700 894
127
ACCESSORY
SHAFTS FOR BI-METAL HOLE SAWS STANDARD
Hexagonal shank.
Fitted with a 6.35 mm Ø HSS pilot drill and length 80 mm.
Reference
Applications
BIZ 700 896
For hole saws 14 to 30 mm Ø
BIZ 700 897
For hole saws 31 to 210 mm Ø
ACCESSORY
HSS PILOT DRILL FOR BIZ 700 896 AND BIZ 700 897 SHAFTS
HSS pilot drill.
Hexagonal shank.
Ø: 6.35 mm.
Length: 80 mm.
BIZ 700 898
Reference
ACCESSORY
SHAFTS FOR CLIC HOLE SAWS
Reference
Shank
Ø drill (mm)
Total length (mm)
Useful length (mm)
Material
Point angle (°)
BIZ 700 430
Hex
6.35
80
38
HSS
135
BIZ 700 431
SDS-plus
6.35
80
38
HSS
135
ACCESSORY
HSS PILOT DRILL FOR BI-METAL 8 % COBALT HOLE SAWS
Reference
BIZ 700 433
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Shank
Ø (mm)
Total length (mm)
Useful length (mm)
Point angle (°)
1/4" hex
6.35
80
38
135
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Supplied in standard with HSS pilot drill (BIZ 700 433).
For all 14-152 mm Ø clic hole saws.
209
HOLE SAWS
ACCESSORY
SET OF TWO CLIC ADAPTERS
Composition:
• 1 small adapter for 14-32 mm standard hole saws.
• 1 large adapter for 33-152 mm standard hole saws.
To change a bi-metal HSS hole saw into a Clic hole saw.
Reference
BIZ 700 432
BI-METAL 8 % COBALT HOLE SAWS STANDARD - SET
Contains:
• 8 x hole saws Ø 38/40/54/64/67/68/76/86 mm.
• 1 x hexagonal shank shaft for hole saws 31 to 210 mm Ø.
• 1 x centering drill 6.35 x 80 mm.
To drill steel, stainless steel, wood and plastic.
Reference
BIZ 700 895
BI-METAL 8 % COBALT HOLE SAWS - CLIC
BI-METAL 8 % COBALT HOLE SAWS CLIC - UNITS
Supplied without shaft or pilot drill.
Ideally suited to stainless steel, steel, cast iron, aluminium (alloy and non-alloy) , non-ferrous
metals and natural and hard wood.
Bi-metal HSS steel with 8 % cobalt.
Saw depth: 40 mm.
Number of teeth per inch: 4/6.
BIZ 700 400
32
Recommended speed in
wood and PVC (rpm)
2400
40
275
140
410
BIZ 700 401
40
2100
40
220
110
330
BIZ 700 402
54
2000
40
160
80
240
BIZ 700 403
65
1850
40
130
65
200
BIZ 700 404
67
1800
40
130
65
195
BIZ 700 405
86
1500
40
100
50
150
BIZ 700 569
105
1000
40
80
40
120
BIZ 700 531
16
3000
40
530
275
825
BIZ 700 533
19
3000
40
460
230
690
BIZ 700 534
20
3000
40
440
220
675
BIZ 700 536
22
3000
40
390
195
580
BIZ 700 538
25
2700
40
350
175
525
BIZ 700 551
51
2000
40
170
85
255
BIZ 700 554
57
2000
40
150
75
225
BIZ 700 556
60
2000
40
140
70
220
BIZ 700 560
73
1800
40
120
60
180
Reference
210
Ø (mm)
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Depth of cut (mm)
Steel (rpm)
Stainless steel (rpm)
Aluminium (rpm)
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HOLE SAWS
Reference
BIZ 700 561
ACCESSORY
Recommended speed in
wood and PVC (rpm)
1800
Ø (mm)
76
Depth of cut (mm)
Steel (rpm)
Stainless steel (rpm)
Aluminium (rpm)
40
115
55
170
Reference
Shank
Ø drill (mm)
Total length (mm)
Useful length (mm)
Material
Point angle (°)
BIZ 700 430
Hex
6.35
80
38
HSS
135
BIZ 700 431
SDS-plus
6.35
80
38
HSS
135
ACCESSORY
Reference
BIZ 700 433
Shank
Ø (mm)
Total length (mm)
Useful length (mm)
Point angle (°)
1/4" hex
6.35
80
38
135
BI-METAL 8 % COBALT HOLE SAWS CLIC Ø 67 MM SET
Pack with hole saw + hex shaft + HSS pilot drill 80 mm.
Reference
BIZ 700 436
MULTI-MATERIAL HOLE SAWS - CLIC
Supplied without shaft or pilot drill.
Ideal for solid and hollow brick, construction materials, plasterboard, plaster blocks, wall tiling,
natural and hard wood, pantiles, cellular concrete, etc.
Not suitable for concrete.
Saw depth: 60 mm.
Four diamond-honed tungsten carbide tips for exceptional, long-lasting performance.
Wide ejection notches BIZ 700 420
40
Recommended speed in wood and
chipboard panels (rpm)
800
600
400
BIZ 700 421
55
700
500
400
BIZ 700 423
68
600
400
400
BIZ 700 424
85
400
300
300
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Ø (mm)
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
Plastic materials (rpm)
Recommended speed in tile (rpm)
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
MULTI-MATERIAL HOLE SAWS CLIC - UNITS
211
HOLE SAWS
ACCESSORY
Reference
Shank
Ø drill (mm)
Total length (mm)
Useful length (mm)
Material
Point angle (°)
BIZ 700 430
Hex
6.35
80
38
HSS
135
BIZ 700 431
SDS-plus
6.35
80
38
HSS
135
ACCESSORY
HSS PILOT DRILL FOR MULTI-MATERIAL HOLE SAWS
1/4" hex. shank drill bits.
Reference
BIZ 700 434
ACCESSORY
Total length (mm)
Useful length (mm)
Shank
Ø (mm)
Point angle (°)
120
78
1/4" hex
6.35
135
CARBIDE PILOT DRILL FOR MULTI-MATERIAL HOLE SAWS
Reference
BIZ 700 437
Total length (mm)
Useful length (mm)
Shank
Ø (mm)
Point angle (°)
120
80
1/4" hex
6.35
118
DIAMOND HOLE SAW - CLIC
DIAMOND HOLE SAW CLIC 68 MM Ø
Ideally suited to drill ceramic materials up to class V.
For inside improvement work in kitchens, bathrooms, etc.
For use with driver-drill with shank for hole saw CLIC BIZ 700 430, but without pilot drill.
Ø: 68 mm.

Diamond coating for a longer life when drilling harder tiles.
Extra-ﬁne cutting edge for quick, clean cuts with no breakout.
“Clic system” for quick ﬁtting.
Side holes for the removal of drilling cores.
Reference
212
BIZ 700 438
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HOLE SAWS
ACCESSORY
Reference
Shank
Ø drill (mm)
Total length (mm)
Useful length (mm)
Material
Point angle (°)
BIZ 700 430
Hex
6.35
80
38
HSS
135
BIZ 700 431
SDS-plus
6.35
80
38
HSS
135
ACCESSORY
DRILLING GUIDE
For 19 to 83 mm Ø hole saws.

Ensures precise drilling in all positions, even at an angle.
Drilling guide with suction cup.
BIZ 780 055
Reference
ACCESSORY
WATER RESERVOIR
For use with BIZ 780 055 drilling guide for a constant and regular spraying of the drilling
area when using diamond drill BIZ 700 438.

Large capacity 0.9 litres.
Can be used anywhere, since it comes with a 180 cm pipe.
Reference
BIZ 780 056
CONCRETE HOLE SAWS
SDS+ CONCRETE HOLE SAWS - UNITS
Reference
Ø drill (mm)
Ø (mm)
Useful length (mm)
Total length (mm)
BIZ 700 184
8
65
70
120
BIZ 700 185
8
67
70
120
BIZ 700 419
8
71
70
120
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Supplied with carbide pilot drill BIZ 700 694 with flats for fitting to the hole saw holder.
For use with SDS+ hammer with hammer-action on and BIZ MP800.
For (non-reinforced) concrete and masonry.
SDS+ hole shank.
Carbide tips.
213
HOLE SAWS
CONCRETE HOLE SAWS
ACCESSORY
PILOT DRILL FOR SDS+ CONCRETE HOLE SAW
Reference
BIZ 700 694
Ø (mm)
Total length (mm)
Useful length (mm)
8
120
70
SDS-MAX CONCRETE HOLE SAW
Supplied with screwless removable carbide pilot drill BIZ 700 696.
For drilling and chiselling work.
For concrete, reinforced concrete, natural stone, masonry and marble.
SDS-Max hole holder.
Carbide tips.
Reference
Ø (mm)
Ø drill (mm)
Total length (mm)
Useful length (mm)
68
12
290
170
BIZ 700 695
ACCESSORY
M16 PILOT DRILL FOR SDS-MAX CONCRETE HOLE SAW BIZ 700 695
Reference
BIZ 700 696
Ø (mm)
Total length (mm)
Useful length (mm)
12
128
50
MULTI-DIAMETER HOLE SAW
Supplied with anti-dust hood.
To cut holes from 48 to 305 mm Ø.
Maximum depth 30 mm.
To cut through plywood, staff, plasterboard, acrylic, fibrocement boards, etc.
Caution: not suitable for metal.

Adjustable blade positions.
Supplied with two carbide blades and two HSS blades.
Reference
214
BIZ 700 197
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HOLE SAWS
ACCESSORY
HSS PILOT DRILL
BIZ 700 198
Reference
ACCESSORY
SET OF TWO HSS BLADES
Plasterboard, solid wood, BA13/plasterboard, veneer wood, plywood.
BIZ 700 199
Reference
ACCESSORY
SET OF TWO CARBIDE BLADES
Staff, wood laminates, particle board, fibre-cement, plexiglass.
Reference
BIZ 700 200
CUTTING DISCS
DIAMOND DISCS
10 mm high laser-welded segments.
Synthetic diamond (99.99 % carbon).
RED DIAMOND DISCS
Reference
Ø (mm)
BIZ 782 001
125
BIZ 782 002
150
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
For hard and very hard materials.
Continuous reinforced ribbed rim.
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
215
CUTTING DISCS
DIAMOND DISCS
SILVER DIAMOND DISCS
For hard and multi-purpose materials.
Segmented rim.
Reference
Ø (mm)
BIZ 782 010
125
BIZ 782 011
150
BLACK DIAMOND DISCS
For abrasive/soft materials.
Continuous ribbed rim. Reinforced.
Reference
Ø (mm)
BIZ 782 020
125
BIZ 782 021
150
CUT-OFF WHEELS
STONE CUTTING WHEELS - SET OF 5
Reference
BIZ 781 002
Ø (mm)
Drilling (mm)
Thickness (mm)
Hub type
125
22.23
3
Domed
STAINLESS STEEL AND METAL CUTTING WHEELS - SET OF 10
Reference
BIZ 781 001
216
Ø (mm)
Drilling (mm)
Thickness (mm)
Hub type
125
22.23
1.6
Flat
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
BLADES
JIG-SAW BLADES FOR WOOD
Simple clip-in fitting.
SPECIAL QUICK BLADES FOR WOOD - SET OF 5
Very clean quick cutting.
In hard or soft wood between 4 and 50 mm thick, particle board, plastics and fibre board.
Tooth length 74 mm with a pitch of 3 mm.
HCS blade (quick-cutting carbon steel), ribbed and reamed.
Reference
BIZ 782 030
BLADES FOR CLEAN CUTS IN WOOD - SET OF 2
Very clean quick cutting.
In hard or soft wood between 2 and 65 mm thick, particle board and fibre board.
Tooth length 91 mm with a pitch of 2-3 mm.
HCS blade (quick-cutting carbon steel), bared and honed.
Reference
BIZ 782 031
BLADES FOR CUTTING CURVES IN WOOD - SET OF 5
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Straight and curved cuts.
In hard and soft wood and plywood between 2 and 15 mm.
HCS blade (quick-cutting carbon steel), offset and relieved.
BIZ 782 032
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
217
BLADES
JIG-SAW BLADES FOR METAL
Simple clip-in fitting.
BLADES FOR CUTTING CURVES IN STEEL - SET OF 5
Curved cut.
In thin sheet between 1.5 and 4 mm thick.
Tooth length 57 mm with a pitch of 1.5 mm.
Bi-metal blade, offset and reamed.

High breaking strength and long-lasting.
Reference
BIZ 782 034
SPECIAL QUICK BLADES FOR STEEL - SET OF 2
Rapid multi-purpose cutting.
In all types of metals (pipes and mouldings, aluminium), thin sheet between 1.5 and 10 mm
thick.
Tooth length 74 mm with a pitch of 1.2-2.6 mm.
HSS blade (rapid steel), ribbed and reamed.
Reference
BIZ 782 033
BLADES FOR STAINLESS STEEL - SET OF 2
Straight and fine cutting.
For stainless sheet between 1.5 to 3 mm.
Tooth length 59 mm with a pitch of 1.1 mm.
Carbide edge.

Long lasting.
Reference
BIZ 782 036
BLADES FOR CURVED CUTTING IN ALUMINIUM - SET OF 5
Quick cutting of curves.
For the quick cutting of curves in copper/tin alloys and aluminium (pipes and mouldings), thin
and thick sheets between 3 and 15 mm thick.
HSS blade (rapid steel), ribbed and reamed.
Reference
218
BIZ 782 035
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
219
SITE AND
WORKSHOP
EQUIPMENT
220
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
DISPENSER REELS
P.222
PULL-WIRES AND ACCESSORIES
P.224
CABLE RODS AND ACCESSORIES
P.232
CABLE REELS
P.237
MULTI-WAY EXTENSION LEADS
P.241
EXTENSION CORDS
P.243
PLUGS AND CONNECTORS
P.244
ELECTRICAL CONNECTION
P.244
LIGHTING
P.246
HIGH ACCESS EQUIPMENT
P.249
FILLERS, PLASTERS
AND ACCESSORIES
P.250
CLEANING MATERIAL
P.253
HYGIENE
P.255
STOWAGE
P.256
WORKSHOP FURNITURE
P.257
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
221
DISPENSER REELS
DRUM ROLLERS
FOLDING DRUM ROLLER

Compact, takes up minimum space.
Reference
BIZ 700 275
Maximum load (kg)
Drum roller dimensions (mm)
Drum roller weight (kg)
Drum Ø (mm)
Maximum drum width (mm)
150
564 x 500 x 82
6.25
300-1050
530
MONOBLOCK DRUM ROLLER
Reference
Maximum load (kg)
Drum roller dimensions (mm)
Drum Ø (mm)
Maximum drum width (mm)
BIZ 700 208
150
564 x 500 x 82
6.25
300-1050
530
BIZ 700 848
300
625 x 550 x 65
10
350-1200
565
DRUM ROLLER STAND
Drum roller stand dimensions (closed): length 575 x width 110 x height 150 mm.
English-style folding for easier rotation of the drum.

Two separate stand parts which can be packed together like a suitcase with a handle for
carrying to site.
Reference
Maximum load (kg)
Drum Ø (mm)
300
10
1030
BIZ 700 207
ACCESSORY
STABILISATION KIT FOR DRUM ROLLER
Reinforced steel end plates, 1.5 mm thick.
6 possible positions for the two rollers.

Ultra-light product providing optimum performance from the 300 kg drum roller stand.
Reference
222
BIZ 700 517
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
DISPENSER REELS
DRUM ROLLERS
HORIZONTAL UNWINDER 50 KG
Double plate horizontal unwinder.
Unwinder weight: 3.4 kg.
Maximum drum roller Ø: 800 mm.
Maximum drum roller weight: 50 kg.
Ø: 240 mm.
Central holder Ø: 50 mm.
Handling and locking ring: M10.

Double plate design for maximum stability.
Reference
BIZ 700 847
BIZ ROLL CABLE AND CONDUIT FEEDER
• For rolls of cable and ICT conduit between 120 and 250 mm Ø.
• For rolls of cable with a 25 mm central core and max height of 300 mm.
Finished in white zinc-plated steel.

Ultra-compact folding roller.
Ready for use in just a few seconds.
Reference
BIZ 700 282
Maximum load (kg)
Outside Ø (mm)
Height of vertical pins (mm)
80
7
825
380
MINI DRUM ROLLER 30 KG
Made of 1 composite tube, 2 fastening rings and 4 fiberglass rods.
Designed for unwinding small cable drums in electrical, intercom or telecom facilities.
Composite tube 44 mm Ø.
Steel connecting rings.
High strength 335 mm long fiberglass support rods.
Pull wire rods are compatible with the connecting rings to create long unwinders.
Reference
Maximum load (kg)
BIZ 700 849
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES

30
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
223
NYLON PULL-WIRES
Low range with average performance over short distances up to 20 m.
Strong, flexible but poor dynamism with shape memory.
Ideal solution for minor cable pulling works for a lesser cost.
NYLON PULL-WIRES WITH BIZKART CASING
Supplied under BIZKART casing with:
• A flexible head with pulling eye, M4 (BIZ 700 088).
• A pulling eye, M4 (BIZ 700 087).
For pulling cables through conduits and electrical ducts.
Hexagonal crimping.
Removable flexible head and eye.
Reference
Length (m)
Pull-wire Ø (mm)
Thread type
Breakage (kg)
BIZ 700 101
10
4
M4
70
BIZ 700 102
15
4
M4
70
BIZ 700 103
20
4
M4
70
NYLON PULL-WIRES WITHOUT CASING
Supplied with:
Hexagonal crimping.

Removable ﬂexible head and eye.
Reference
Length (m)
Pull-wire Ø (mm)
Thread type
Breakage (kg)
BIZ 700 410
10
4
M4
70
BIZ 700 411
15
4
M4
70
BIZ 700 412
20
4
M4
70
BIZ 700 413
30
4
M4
70
ACCESSORIES FOR NYLON PULL-WIRES
Reference
Description
BIZ 700 087
PULLING EYE, M4
BIZ 700 088
FLEXIBLE HEAD WITH PULLING EYE, M4
KIT OF TWO CABLE GRIPS, M4
BIZ 700 089
224
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Kit contains:
• 1 steel cable grip for 6 to 12 mm Ø cables.
• 1 nylon cable grip for 6 to 10 mm Ø cables.
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POLYESTER PULL-WIRES
Excellent performance over full length even in conduits with other cables present or very windy.
With good dynamism and particularly high strength and flexibility.
POLYESTER PULL-WIRE WITH BIZKART CASING
• A rigid head with pulling eye, M5, Ø 8 mm (BIZ 700 240).
• A pulling eye, M5, Ø 6 mm (BIZ 700 241).
Pulling cable through conduits even obstructed.
Triple twisted polyester.

No shape memory.
Low risk of breakage.
Long lasting.
Reference
BIZ 700 391
Length (m)
Pull-wire Ø (mm)
Thread type
Breakage (kg)
20
4.5
M5
150
POLYESTER PULL-WIRES WITH DISPENSER REEL
Supplied with:
•
•
•
•
A
A
A
A
dispenser reel.
slide wheel, M5, Ø 30 mm (BIZ 700 243).
flexible guide head with ball, M5 (BIZ 700 238).
pulling eye, M5, Ø 6 mm (BIZ 700 241).
Pulling cable through conduits even obstructed.
Triple twisted polyester.

No shape memory.
Low risk of breakage.
Long lasting.
Reference
Length (m)
Pull-wire Ø (mm)
Thread type
Breakage (kg)
BIZ 700 392
30
6
M5
200
BIZ 700 393
50
6
M5
200
ACCESSORIES FOR POLYESTER PULL-WIRES
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Description
BIZ 700 241
PULLING EYE, M5, Ø 6 MM
BIZ 700 240
RIGID HEAD WITH PULLING EYE, M5, Ø 8 MM
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Reference
225
STEEL-NYLON PULL-WIRES
Excellent between 20 and 100 m.
Ideal effectiveness level with good dynamism and proper strength, but with shape memory.
STEEL-NYLON PULL-WIRES WITH BIZKART CASING
• A rigid head with pulling eye, M5, Ø 8 mm (BIZ 700 240).
• A pulling eye, M5, Ø 6 mm (BIZ 700 241).
Reference
Length (m)
Pull-wire Ø (mm)
Thread type
Breakage (kg)
BIZ 700 233
20
4
M5
130
BIZ 700 234
30
4
M5
130
Breakage (kg)
STEEL-NYLON PULL-WIRES WITHOUT CASING
Supplied with:
• For BIZ 700 235: Flexible guide head with ball, M5 (BIZ 700 238) and pulling eye, M5
(BIZ 700 242).
• For BIZ 700 251: Flexible guide head with ball, M12 (BIZ 700 247) and a 30 mm Ø roller
that can be transformed into a pulling eye, M5 (BIZ 700 248).
Hexagonal crimping.
Reference
Length (m)
Pull-wire Ø (mm)
Thread type
BIZ 700 235
52
6
M5
350
BIZ 700 251
102
10
M12
800
Breakage (kg)
STEEL-NYLON PULL-WIRES WITH DISPENSER REEL
Supplied with:
• For BIZ 700 236: a dispenser reel (height 70 cm, BIZ 700 237), a rigid head with pulling eye,
M5 Ø 8 mm (BIZ 700 239), a flexible guide head with ball, M5 (BIZ 700 238) and a pulling
eye, M5, Ø 8 mm (BIZ 700 242).
• For BIZ 700 244: a dispenser reel (height 124 cm, BIZ 700 250), a flexible guide head with
ball, M12 (BIZ 700 247) and a roller, M12, Ø 30 mm that can be transformed into a pulling
eye (BIZ 700 248).
Hexagonal crimping.
Reference
226
Length (m)
Pull-wire Ø (mm)
Thread type
BIZ 700 236
52
6
M5
350
BIZ 700 244
102
10
M12
800
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
ACCESSORIES FOR STEEL-NYLON PULL-WIRES - Ø 4 MM
Reference
Description
BIZ 700 241
BIZ 700 240
BIZ 700 390
HOOK, M5
Reference
Description
BIZ 700 242
BIZ 700 239
BIZ 700 243
ALUMINIUM ROLLER, M5, Ø 30 MM
BIZ 700 238
FLEXIBLE GUIDE HEAD WITH BALL, M5, Ø 8 MM
BIZ 700 237
DISPENSER REEL HEIGHT 70 CM
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Description
BIZ 700 248
BIZ 700 257
CONNECTING SLEEVE, FEMALE/FEMALE M12/M12
BIZ 700 452
REPAIR KIT FOR STEEL/NYLON 10 MM Ø PULL-WIRES
BIZ 700 250
DISPENSER REEL HEIGHT 1.24 M
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
BIZ 700 247
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
227
FIBERGLASS PULL-WIRES
The most dynamic of all pull wires.
No shape memory.
The best performance over long distances.
Rigid and fragile, they require particular care at closed passage angles and handling upon pulling likely to damage them.
FIBERGLASS PULL-WIRES WITH BIZKART CASING
• A repair kit (2 M4 threaded end pieces, a connector sleeve and a 3 g tube of cyanoacrylate
glue, BIZ 700 216).
Hexagonal crimping.
Removable eye and flexible head.
Reference
Length (m)
Pull-wire Ø (mm)
Thread type
Breakage (kg)
BIZ 700 076
30
3
M4
70
BIZ 700 086
50
3
M4
70
FIBERGLASS PULL-WIRES WITHOUT CASING
Supplied with:
• BIZ 700 259: a flexible guide head with ball, M5 (BIZ 700 238), a roller, M5, Ø 30 mm
(BIZ 700 243) and a pulling eye, M5 (BIZ 700 242).
• BIZ 700 252 and BIZ 700 253: a flexible guide head with ball, M12 (BIZ 700 247) and
a roller, M12, Ø 53 mm that can be transformed into a pulling eye, M5 (BIZ 700 248).
For pulling cables through electrical ducts.
Hexagonal crimping.
Removable eye and head.
Reference
Length (m)
Pull-wire Ø (mm)
Thread type
Breakage (kg)
BIZ 700 259
52
6
M5
200
BIZ 700 252
102
9
M12
350
BIZ 700 253
202
11
M12
500
FIBERGLASS PULL-WIRES WITH DISPENSER REEL
Supplied with:
• BIZ 700 258: a reel (height 70 cm, BIZ 700 237), a flexible guide head with ball, M5
(BIZ 700 238), a roller, M5, Ø 30 mm (BIZ 700 243) and a pulling eye, M5 (BIZ 700 242).
• BIZ 700 245 and BIZ 700 246: a reel (height 1.24 m, BIZ 700 250), a flexible guide head
with ball, M12 (BIZ 700 247) and a roller, M12, Ø 53 mm that can be transformed into a
pulling eye, M5 (BIZ 700 249).
Pulling cables in electrical conduits over long distances.

Maximum dynamism for easy working over long distances.
Reference
228
Length (m)
Pull-wire Ø (mm)
Thread type
Breakage (kg)
BIZ 700 258
52
6
M5
200
BIZ 700 245
102
9
M12
350
BIZ 700 246
202
11
M12
500
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
ACCESSORIES FOR FIBERGLASS PULL-WIRES - Ø 3 MM
Reference
Description
BIZ 700 087
PULLING EYE, M4
BIZ 700 088
FLEXIBLE HEAD WITH PULLING EYE, M4
BIZ 700 216
REPAIR KIT FOR FIBERGLASS PULL-WIRES Ø 3 MM
ACCESSORIES FOR FIBERGLASS PULL-WIRES Ø 6 MM
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Description
BIZ 700 239
BIZ 700 390
HOOK, M5
BIZ 700 238
BIZ 700 243
BIZ 700 450
BIZ 700 256
REPAIR GLUE FOR FIBERGLASS PULL-WIRES Ø 6 MM,
9 MM AND 11 MM
BIZ 700 237
DISPENSER REEL HEIGHT 70 CM
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
BIZ 700 242
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
229
ACCESSORIES FOR FIBERGLASS PULL-WIRES Ø 9 AND 11 MM
Reference
230
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Description
BIZ 700 247
BIZ 700 249
BIZ 700 257
CONNECTING SLEEVE, FEMALE/FEMALE M12/M12
BIZ 700 254
BIZ 700 255
BIZ 700 256
REPAIR GLUE FOR FIBERGLASS PULL-WIRES Ø 6 MM,
9 MM AND 11 MM
BIZ 700 250
DISPENSER REEL HEIGHT 1.24 M
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
ACCESSORIES FOR ANY PULL-WIRES TYPE
CABLE GRIPS
Accessory for pulling cables through ducts and conduits.
Reference
Cable Ø (mm)
Cable grips material
BIZ 790 150
6-12
Galvanized steel
Breakage (kg)
300
BIZ 790 151
13-19
Galvanized steel
400
BIZ 790 152
20-26
Galvanized steel
400
BIZ 790 153
27-32
Galvanized steel
400
BIZ 790 154
6-10
Polyamid
100
BIZ 790 155
13-19
Polyamid
150
BIZ 790 156
20-26
Polyamid
150
BIZ 790 157
27-32
Polyamid
150
KIT OF 2 M4/M5 ADAPTERS
Kit includes:
• 1 brass M4 female/M5 male adapter.
• 1 brass M5 female/M4 male adapter.
To use all M4 threading accessories with your M5 threaded rods or wire pullers, and
conversely your M5 accessories with your M4 threaded rods or wire pullers.
Reference
BIZ 790 145
ICTA CONDUIT PULLER
Contains 3 conduit pullers 16/20/25 mm.
Pulling conduits.
Tensile strength from 20 to 45 kg according to model.

Quick: 5 seconds is all it takes to ﬁt or remove it.
No need to make intermediate holes to locate your conduits inside the walls.
No need to make holes in conduits.
Compatible with all brands of ICTA conduit on the market.
Reference
BIZ 700 181
WIRE PULLING LUBRICANT BIZ LUB'

For the trouble-free pulling of wires and cables in conduits, trunking and electrical ducts.
Ph neutral (6.5 ± 0.5).
Operating temperature: -5 °C to +82 °C (freezes at -5 °C).
Density: 1.010 ± 0.01 g/ml.
Viscosity: 3400 ± 200 cps.
Dry residue: 12 °C.
Volume: 1 l.
Lifetime: 5 years.
Non-inﬂammable, non-corrosive, non-toxic.
For use with high and low-current cables.
High lubricating capability.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 700 231
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
231
12 M FIBERGLASS CABLE ROD KIT
Kit includes:
•
•
•
•
•
•
•
•
12 rods of 1 m.
1 round end tip.
1 flat end tip.
1 pulling ring that can be changed into an eye.
1 female/female adapter.
1 large hook.
1 flexible nylon guide, 17.5 cm.
1 flexible nylon guide, 33 cm.
Supplied with a storage tube.
Pulling cables through false ceilings, hollow partitions, ducts and conduits.
Reference
Ø (mm)
Colour
5
Red
BIZ 700 130
10 M CABLE ROD KIT
Kit includes:
•
•
•
•
•
•
•
•
10 rods of 1 m.
1 round end tip.
1 flat end tip.
1 pulling ring that can be changed into an eye.
1 female/female adapter.
1 large hook.
1 flexible nylon guide, 17.5 cm.
1 flexible nylon guide, 33 cm.
Reference
Ø (mm)
Colour
BIZ 700 145
4
Yellow
BIZ 700 146
6
Black
3 M CABLE ROD KIT
Kit includes:
•
•
•
•
•
•
•
9
1
1
1
1
1
1
fiberglass rods of 33 cm.
round end tip.
eye.
female/female adapter.
large hook.
flexible nylon guide, 17.5 cm.
flexible nylon guide, 33 cm.
Pulling cables through hollow partitions and conduits.

Easy storage.
Practical: suitable for work in conﬁned spaces.
Reference
232
Ø (mm)
Colour
BIZ 700 131
5
Red
BIZ 700 147
4
Yellow
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
COMPLETE CABLE ROD KIT
Kit includes:
• BIZ 700 130: Kit of 12 x 1 m red fiberglass rods Ø 5 mm, 1 round end tip, 1 flat end tip,
1 pulling ring that can be changed into an eye, 1 female/female adapter, 1 large hook,
1 flexible nylon guide 17.5 cm and 1 flexible nylon guide 33 cm.
• BIZ 700 133: 2 nylon flexible guide kit 17.5 cm and 33 cm.
• BIZ 700 134: Magnetic location kit (compass and magnet).
• BIZ 700 135: Mini-LED kit.
• BIZ 700 151: Set of 3 spare batteries for mini-LED.
• BIZ 700 137: Kit of 2 x 1 m black fiberglass Ø 6 mm.
• BIZ 700 148: 30 cm chain and magnet kit.
• BIZ 700 150: Kit of 2 cleaning brushes.
• BIZ 700 153: Kit of 2 flexible guides with shape memory.
• BIZ 700 155: Kit of 2 rods Ø 5 mm with rotary connectors.
• BIZ 700 157: Kit of 5 cable grips, 4-30 mm.
Reference
BIZ 790 144
ACCESSORIES FOR CABLES RODS
KIT OF 6 ACCESSORIES FOR CABLE RODS
Kit includes:
•
•
•
•
•
•
1
1
1
1
1
1
round end tip.
flat end tip.
female/female adapter.
large hook.
small hook.
pulling ring that can be changed into an eye.
Reference
BIZ 700 132
Reference
Ø (mm)
Colour
Length (m)
BIZ 700 136
5
Red
2x1
BIZ 700 137
6
Black
2x1
BIZ 700 138
4
Yellow
2 x 0.35
BIZ 700 139
4
Yellow
2x1
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
KIT OF 2 CABLE RODS
233
KIT OF 2 NYLON GUIDE
Reference
Composition
BIZ 700 140
2x1m
BIZ 700 133
1 x 33 cm + 1 x 7.5 cm
MINI LED KIT FOR CABLE RODS
A white LED lamp supplied with 3 button cells.
Facilitates work in confined, poorly lit spaces.
Light intensity: 15000 mcd.
Light angle: 15°.
Reference
BIZ 700 135
KIT OF 3 SPARE BATTERIES FOR MINI LED
For LED bulb (BIZ 700 135).
Reference
BIZ 700 151
MAGNETIC LOCATION KIT
Kit includes:
• 1 compass.
• 1 magnet (lifting capacity 2.5 kg).
Location of the position of the rod inside the wall.

Easy location prevents unnecessary drilling.
The magnet may be used on its own on a rod to recover difﬁcult-to-access objects.
Reference
234
BIZ 700 134
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
EMPTY STORAGE TUBES
Reference
Length (cm)
BIZ 700 141
115
BIZ 700 142
38
BIZ 700 143
19.5
30 CM CHAIN AND MAGNET KIT
Kit includes:
• 1 30 cm steel chain with a female tip (tensile strenght 3 kg).
• 1 powerful magnet (lifting capacity 2.5 kg).
Allows a connection to be made between two rods coming from opposite directions in
confined spaces such as inside partition walls, false ceilings, sanitary voids, etc.
Reference
BIZ 700 148
ALL-PURPOSE HEAD
The specially designed shape of the head enables it to pass over any obstacles present,
particularly in false ceilings and over cable trays.
Reference
BIZ 700 152
KIT OF 2 FLEXIBLE GUIDES WITH SHAPE MEMORY
Kit includes:
• 1 shape memory flexible guide, 17.5 cm
• 1 shape memory flexible guide, 25 cm.
Holds the cable perfectly when pulling through conduits.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 700 153
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
235
KIT OF 2 CLEANING BRUSHES
Kit includes:
• 1 small brush (40 x 25 mm) in twisted nylon (thickness: 0.35 mm).
• 1 large brush (40 x 50 mm) in twisted nylon (thickness: 0.900 mm).
Cleaning blocked conduits.
Ideal for guiding rods through conduits: avoids the rod touching the edges of the conduit.
Reference
BIZ 700 150
KIT OF 2 RODS WITH ROTARY CONNECTORS
Guarantees a good connection between rods in any difficult situation
where rods can sometimes come unscrewed.
Reference
Colour
Ø (mm)
BIZ 700 156
Yellow
4
BIZ 700 155
Red
5
SNAP-HOOK FOR CABLE RODS
Allows to attach quickly cables to pull.

Can replace a hook.
Reference
BIZ 700 158
KIT OF 5 CABLE GRIPS 4-30 MM
Kit includes 5 cable grips:
•
•
•
•
•
1
1
1
1
1
for
for
for
for
for
4-6 mm cables.
6-10 mm cables.
11-15 mm cables.
16-22 mm cables.
23-30 mm cables.
Made of stainless steel and equipped with threaded tips for cable rods.
Tensile strenght: 80 kg.
Reference
BIZ 700 157
KIT OF 2 CABLE GRIPS 6-15 MM
Kit includes 2 cable grips:
• 1 for 6-10 mm cables.
• 1 for 11-15 mm cables.
Made of stainless steel and equipped with threaded tips for cable rods.
Tensile strenght: 80 kg.
Reference
236
BIZ 700 149
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CABLE REELS
PROFESSIONAL CABLE REELS - PLUG TYPE E (FRENCH PLUG)
Compliant with regulations:
Meet NF EN 61242, with thermal overload protection and manual reset.
Technical specifications:
IP 44.
Base with 4 flap cover sockets 2P+E 16 A 230 V.
Max. power: 1000 W rolled/3500 W unrolled.
Benefits:
•
•
•
•
•
•
Extremely stable with its double U-shape structure.
Extremely solid for professional use.
With cable guide to assist with rolling/unrolling.
Stand designed so that the cable does not slide behind the drum.
Ergonomic carry handle.
Rotating winder.
PROFESSIONAL CABLE REELS 25 M AND 40 M H07RN-F - PLUG TYPE E
(FRENCH PLUG)
YEARS
GUARANTEE
Plastic drum (non-recycled PP) impact resistant.
Reinforced steel frame, baked epoxy/polyester coating.
»
»
NF EN 61242
IP 44
Reference
Cable length (m)
Cable type
BIZ 700 973
40
H07RN-F 3G1.5
BIZ 700 974
25
H07RN-F 3G2.5
PROFESSIONAL CABLE REEL WITH A NON-ROTATIVE BASE
40 M H07RN-F 3G1.5 PLUG - TYPE E (FRENCH PLUG)
YEARS
GUARANTEE

NF EN 61242
IP 44
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
»
»
Non-rotative outlet base: Does not turn while rolling/unrolling. Prevents the cords that are
plugged from tangling.
BIZ 700 975
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
237
CABLE REELS
PROFESSIONAL CABLE REELS - PLUG TYPE E (FRENCH PLUG)
PROFESSIONAL CABLE REEL WITH A NON-ROTATIVE BASE AND AN EXTERNAL
OUTLET BLOCK 40 M H07RN-F 3G1.5 - PLUG TYPE E (FRENCH PLUG)
YEARS
GUARANTEE
External outlet block with 4 flap cover sockets 2P+E 16 A 230 V.
Non-rotative central base. Cable supply length: 1.40 m.

»
»
Ideal for use at height or in places with difﬁcult access.
External rubber block for greater resistance to impacts.
Non-rotative base allowing remote work while preventing the supply cable from twisting and
tangling.
NF EN 61242
IP 44
Reference
BIZ 700 976
PROFESSIONAL CABLE REEL WITH 30 MA RESIDUAL CURRENT DEVICE 25 M
H07RN-F 3G2.5 - PLUG TYPE E (FRENCH PLUG)
YEARS
GUARANTEE

»
»
Optimum human safety for work on outdoor sites.
Meets OPPBTP recommendations.
NF EN 61242
IP 44
Reference
BIZ 700 977
PROFESSIONAL CABLE REEL WITH METALLIC FRAME 30 M
H07RN-F 3G1.5 - PLUG TYPE E (FRENCH PLUG)
YEARS
GUARANTEE
Frame in galvanised steel.
Reinforced hub in insulating material.
Frame in galvanised steel tube.
»
»
NF EN 61242
IP 44
Reference
238
BIZ 700 978
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CABLE REELS
PROFESSIONAL CABLE REELS - PLUG TYPE F (SCHUKO PLUG)
Meet SEMKO as per EN 61242, with thermal overload protection and manual reset.
IP 44.
Base with 3 flap cover sockets 2P+E 16 A 230 V.
Max. power: 1000 W rolled/3500 W unrolled.
Benefits:
•
•
•
•
•
•
Extremely stable with its double U-shape structure.
Extremely solid for professional use.
With cable guide to assist with rolling/unrolling.
Stand designed so that the cable does not slide behind the drum.
Rotating winder.
PROFESSIONAL CABLE REELS 25 M AND 40 M
H05RR-F 3G1.5 - PLUG TYPE F (SCHUKO PLUG)
YEARS
GUARANTEE
»
»
EN 61242
IP 44
Reference
Length (m)
BIZ 700 911
40
BIZ 700 912
25
PROFESSIONAL CABLE REEL WITH NON-ROTATIVE BASE 40 M
H05RR-F 3G1.5 - PLUG TYPE F (SCHUKO PLUG)
YEARS
GUARANTEE

EN 61 242
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
»
Non-rotative plug base: Does not turn while reeling/unreeling.
Prevents cords that are plugged from tangling.
BIZ 700 913
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
239
CABLE REELS
PROFESSIONAL CABLE REELS - PLUG TYPE F (SCHUKO PLUG)
PROFESSIONAL CABLE REEL WITH NON-ROTATIVE BASE AND AN EXTERNAL
OUTLET BLOCK 40 M H05RR-F 3G1.5 - PLUG TYPE F (SCHUKO PLUG)
YEARS
GUARANTEE
Building site reel with separate block and fixed base.
External outlet block with 3 flap cover sockets 2P+E 16 A 230 V.
Non-rotative central base. Cable supply length: 1.40 m.

»
»
Ideal for use at height or in places with difﬁcult access.
External rubber block for greater resistance to impacts.
Non-rotative base allowing remote work while preventing the supply cable from twisting and
tangling.
EN 61242
IP 44
Reference
BIZ 700 914
STANDARD CABLE REELS - PLUG TYPE E (FRENCH PLUG)
Meets NF EN 61242, with thermal overload protection and manual reset.
Base with 4 sockets 2P+E 16 A 230 V with safety shutters.
Maximum power: 1000 W rolled/3500 W unrolled.
Steel frame.
STANDARD CABLE REELS 25 M AND 40 M
H05VV-F 3G1.5 - PLUG TYPE E (FRENCH PLUG)
»
GUARANTEE
NF EN 61242
Reference
240
YEAR
Cable length (m)
BIZ 700 972
25
BIZ 700 971
40
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
UNCABLED MULTI-WAY EXTENSION LEAD - PLUG TYPE E (FRENCH PLUG)
Extension lead without cable and without switch.
16 A, maximum power 3680 W 230 V.
With safety shutters.
To use with H05VV-F 3G1.5 mm² cable.
Colour: white.
»
NFC 61-314
Reference
BIZ 700 970
Number of sockets
Dimensions (mm)
4 x 2P+E
237 x 48 x 39
STANDARD MULTI-WAY EXTENSION LEADS - PLUG TYPE E (FRENCH PLUG)
Colour: white.
»
NFC 61-314
Reference
Number of sockets
Cable length (m)
Cable type
Dimensions (mm)
BIZ 700 953
3 x 2P+E
1.5
H05VV-F 3G1.0 mm² with 2P+E plug
190 x 54 x 41
BIZ 700 954
4 x 2P+E
1.5
233 x 54 x 41
BIZ 700 955
4 x 2P+E
3
233 x 54 x 41
MULTI-WAY EXTENSION LEADS - PLUG TYPE F (SCHUKO PLUG)
Colour: white.
IEC 60884-1
Reference
Number of sockets
Cable length (m)
Cable type
BIZ 700 990
3 x 2P+E
3
H05VV-F3G1,5 mm²
190 x 50 x 41
BIZ 700 991
3 x 2P+E
2
H05VV-F3G1,5 mm²
190 x 50 x 41
BIZ 700 992
3 x 2P+E
3
H05VV-F3G1,5 mm²
190 x 50 x 41
BIZ 700 993
3 x 2P+E
5
H05VV-F3G1,5 mm²
190 x 50 x 41
BIZ 700 994
6 x 2P+E
1.5
H05VV-F3G1,5 mm²
310 x 50 x 41
BIZ 700 995
6 x 2P+E
3
H05VV-F3G1,5 mm²
310 x 50 x 41
BIZ 700 996
6 x 2P+E
5
H05VV-F3G1,5 mm²
310 x 50 x 41
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
Dimensions (mm)
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
241
MULTI-WAY EXTENSION LEADS WITH USB PORTS - PLUG TYPE E (FRENCH PLUG)
2 USB ports.
Colour: white.

»
2 autonomous USB chargers.
NFC 61-314
Reference
Number of sockets
Cable length (m)
Cable type
BIZ 700 945
3 x 2P+E
1.5
BIZ 700 946
5 x 2P+E
1.5
MULTI-WAY EXTENSION LEADS WITH SWITCH - PLUG TYPE E (FRENCH PLUG)
With light switch.
Colour: white.
»
NFC 61-314
Reference
Number of sockets
Cable length (m)
Cable type
Dimensions (mm)
BIZ 700 963
3 x 2P+E
1.5
223 x 54 x 41
BIZ 700 964
4 x 2P+E
1.5
266 x 54 x 41
BIZ 700 965
5 x 2P+E
1.5
309 x 54 x 41
BIZ 700 966
6 x 2P+E
1.5
352 x 54 x 41
BIZ 700 967
6 x 2P+E
3
352 x 54 x 41
MULTI-WAY EXTENSION LEADS WITH SWITCH - PLUG TYPE F (SCHUKO PLUG)
With light switch.
Colour: white.
»
IEC 60884-1
Reference
242
Number of sockets
Cable length (m)
Cable type
BIZ 700 997
6 x 2P+E
1.5
H05VV-F 3G1,5 with 2P+E plug
350 x 50 x 41
BIZ 700 998
6 x 2P+E
3
H05VV-F 3G1,5 with 2P+E plug
350 x 50 x 41
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Dimensions (mm)
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
3-WAY SOCKET - PLUG TYPE E (FRENCH PLUG)
Colour: white.
»
NFC 61-314
Reference
Number of sockets
BIZ 700 910
3 x 2P+E
EXTENSION CORDS
STANDARD EXTENSION CORDS - PLUG TYPE E (FRENCH PLUG)
2P+E 16 A socket and plug with safety shutters.
Maximum power 3680 W 230 V.
Colour: white.
»
»
NFC 61-314
IP 20
Reference
Cable length (m)
Cable type
3
H05VV-F 3G1.5 mm²
BIZ 700 923
BIZ 700 924
5
H05VV-F 3G1.5 mm²
BIZ 700 925
10
H05VV-F 3G1.5 mm²
PROFESSIONAL EXTENSION CORDS - PLUG TYPE E (FRENCH PLUG)
2P+E 16 A socket and plug with safety shutters and flap cover.
Colour: black.
»
»
NFC 61-314
IP 44
Reference
Cable length (m)
Cable type
BIZ 700 926
5
H07RN-F 3G1.5 mm²
BIZ 700 927
10
H07RN-F 3G1.5 mm²
STANDARD EXTENSION CORDS - PLUG TYPE F (SCHUKO PLUG)
2P+E 16 A socket and plug with safety shutters.
Colour: white.
DIN VDE 0620-1
IP 20
Reference
BIZ 700 906
Cable length (m)
Cable type
3
H05VV-F 3G1,5 mm²
BIZ 700 907
6
H05VV-F 3G1,5 mm²
BIZ 700 908
10
H05VV-F 3G1,5 mm²
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
»
243
RUBBER PLUGS AND CONNECTORS
IP 44 plug and extension.
For fitting to cable H07RN-F 3G1.5 mm².
For Class I equipment.
Plugs and connectors in thermoplastic elastomer.
Connectors with safety shutters.
Pin Ø: 4.8 mm.
Colour: black.
»
»
NFC 61-314
IK 08
Reference
Type
BIZ 700 930
16 A 2P+E straight plug
BIZ 700 931
16 A 2P+E straight connector
BIZ 700 932
Connector with 2 x 16 A 2P+E flap cover sockets
PLASTIC PLUGS AND CONNECTORS
For fitting to cable Ø 11 mm maximum.
For Class I equipment.
Connectors with safety shutters.
Pin Ø: 4.8 mm.
Colour: white.
»
NFC 61-314
Reference
Type
BIZ 700 940
16 A 2P+E plug with ring
BIZ 700 941
16 A 2P+E connector with ring
BIZ 700 942
16 A 2P+E side exit plug
BIZ 700 943
16 A 2P+E straight plug
BIZ 700 944
16 A 2P+E straight connector
ELECTRICAL CORD 2.5 A 2 M
2.5 A 2P plug.
Colour: white.
Reference
Cable type
BIZ 700 935
244
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
H03VVH2-F 2 x 0.75 mm²
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
ELECTRICAL CORD 2.5 A 3 M
2.5 A 2P plug.
Colour: white.
Reference
Cable type
BIZ 700 936
H03VVH2-F 2 x 0.75 mm²
ELECTRICAL CORD 16 A 2 M
16 A 2P + E plug.
Colour: white.
»
DIN VDE 0620-1
Reference
Cable type
BIZ 700 937
H05VV-F 3G0.75 mm²
16 A 2P + E plug.
Colour: white.
»
DIN VDE 0620-1
Reference
Cable type
BIZ 700 938
H05VV-F 3G0.75 mm²
16 A 2P + E plug.
Colour: white.
DIN VDE 0620-1
Reference
Cable type
BIZ 700 939
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
»
H05VV-F 3G0.75 mm²
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
245
LIGHTING
INSPECTION LAMPS
11 W FLUORESCENT INSPECTION LAMP
YEARS
GUARANTEE
Tip and handle made of impact-resistant PP.
Impact-resistant polycarbonate enclosure.
With 5 m H05RN-F 2 x 1.0 mm² cable.
2P 16 A 230 V 50 Hz plug.
G23 lamp holder.
Supplied with 11 W fluo lamp.

»
»
Fitted with an electronic ballast.
With switch and rotating steel hook.
NF EN 60598-2-8
IP 44
Reference
BIZ 625 012
LED INSPECTION LAMP
YEARS
GUARANTEE
Portable 28 leds rechargeable lamp.
On-Off switch.
NI-MH rechargeable battery:
• Output: 3.6 V DC.
Charger:
• Input: 100-240 V AC, 50/60 Hz, < 5 Watt.
• Output: 4.5 V DC, < 2.5 Watt.
Operating time about 4 to 5 hours.

»
»
Plastic folding hook, 360° rotation.
Magnetic holder.
Low power consumption.
Long lasting.
NF EN 60598-2-8
IP 20
Reference
BIZ 625 006
60 W INSPECTION LAMP
YEARS
GUARANTEE
Insulated, impact-resistant PVC handle.
Swiveling protective steel cage for easy bulb replacement.
180° wrap-around reflector.
With 5 m H05VV-F 2 x 0.75 mm² cable.
2P 2.5 A 230 V 50 Hz plug.
60 W max. bulb, E27 lamp holder.
Supplied without bulb.

»
»
With switch and rotating steel hanging hook.
Lamp usable with low energy bulbs.
NF EN 60598-2-8
IP 20
Reference
246
BIZ 625 010
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
LIGHTING
INSPECTION LAMPS
100 W INSPECTION LAMP
YEARS
Protective glass with reflector.
Rubber handle.
Protective steel cage, top opening for bulb replacement.
With 5 m H07RN-F 2 x 1.0 mm² cable.
2P 16 A 230 V 50 Hz plug.
100 W max. bulb, E27 lamp holder.
Supplied without bulb.
Compatible with energy-saving bulbs, complying with Directive EuP 2005/32/CE.

»
»
GUARANTEE
Hexagonal edge to prevent the lamp from rolling when placed on the ground.
Lamp usable with low energy bulbs.
NF EN 60598-2-8
IP 54
Reference
BIZ 625 011
WORK LIGHTS
FLUORESCENT WORK LIGHT 2 X 36 W
YEARS
GUARANTEE
Impact-resistant polycarbonate shield.
Electronic ballast.
Medium illumination at 1 meter: 733 Lx.
Luminous flux: 5800 lm.
Multi-position stand made of steel.
5 m H07RN-F 2G1.5 mm² cable.
2P+E 16 A 250 V 50 Hz plug.
2G11 lamp holder.
Supplied with 2 x 36 W fluo lamps.

NF EN 60598-2-5
IP 54, IK 10
Reference
(kg)
BIZ 625 015
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
»
»
Fitted with an electronic ballast.
Can be placed on the ground or fitted to tripod BIZ 625 016.
Multi-position stand allows varying angles of tilt both when the light is placed on the ground or
used on a tripod.
With two IP 54 flap cover sockets on the back.
Extremely strong and suitable for intensive work on site.
Easy replacement of fluo lamps.
Low weight for ease of transport.
3.6
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
247
LIGHTING
WORK LIGHTS
TRIPOD FOR BIZ 625 015 FLUORESCENT WORK LIGHT
YEARS
GUARANTEE
Zinc-plated steel.

»
Cable can be coiled on to the tripod for easy handling.
NF EN 60598-2-5
Reference
(kg)
BIZ 625 016
4.2
400 W PORTABLE HALOGEN LIGHT, CLASS C, OUTPUT 500 W
YEARS
GUARANTEE
400 W class C 2000-hour, 9200 lm halogen meeting Directive EuP 2005/32/EC governing the
eco design of lighting products.
Cast aluminium housing.
Removable chrome protective cage and pre-stressed safety glass pane.
Tubular stand in galvanised steel.
2P+E 16 A 230 V 50 Hz plug.
R7s lamp holder.
Supplied with one 400 W class C halogen lamp.
Colour: aluminium.

»
»
Light tiltable on its stand, with end stop.
NF EN 60598-2-5
IP 54
Reference
(kg)
BIZ 625 013
2.52
400 W PORTABLE HALOGEN LIGHT ON TRIPOD, CLASS C, OUTPUT 500 W
400 W class C 2000-hour, 9200 lm halogen meeting Directive EuP 2005/32/EC governing the
eco design of lighting products.
Cast aluminium housing.
Removable chrome protective cage and pre-stressed safety glass pane.
Telescopic tripod, adjustable between 0.7 and 2.0 m.
Baked paint finish tube.
2P+E 16 A 230 V 50 Hz plug.
R7s lamp holder.
Supplied with one 400 W class C halogen lamp.
Colour: blue.

»
»
GUARANTEE
Light tiltable on its stand, with end stop.
Captive legs integral with the tripod..
NF EN 60598-2-5
IP 44
Reference
(kg)
BIZ 625 014
248
YEARS
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
5.38
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HIGH ACCESS EQUIPMENT
TELESCOPIC LADDER
Supplied with a carry bag.
Material: anodized aluminium.

»
Compact.
Easy to transport with its carry bag.
Quick opening.
Adjustable at the appropriate height thanks to an individual locking system for each rung.
Easy to close with its centralized unlocking system.
EN 131
Reference
Number of rungs
Step width (mm)
11
39
BIZ 730 915
Maximum access
height (m)
4.1
Width (cm)
Height folded (cm)
Height unfolded (m)
39
72
3.2
Width (cm)
Height folded (cm)
Height unfolded (m)
65
65
1.7
Maximum weight
withstood per rung (kg)
150
(kg)
8.2
TELESCOPIC STEPLADDER
Supplied with a carry bag.
Material: anodized aluminium.

EN 131
Reference
Number of rungs
Step width (mm)
4+2
39
BIZ 730 916
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Maximum access
height (m)
2.5
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
Maximum weight
withstood per rung (kg)
150
(kg)
9.9
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
Compact.
Easy to transport with its carry bag.
Quick opening.
Easy to close with its centralized unlocking system.
249
FILLERS, PLASTERS AND ACCESSORIES
FILLER
Filler, ready to use.
Indoor and outdoor use.
Re-usable after opening.
Smooth finish.
Will not stain or drip.
Does not shrink on drying.
Can be sanded, drilled, and painted.
Repair product, filler and finish for cracks, holes, splits.
Appearance: white paste.
Lifetime: 3 years from date of manufacture, 2 years after opening if the product is stored
hermetically.

Ready to use.
Will not drip.
Quick setting.
Reference
BIZ 740 121
Volume (ml)
Packaging type
750
Pot
QUICK-SET CEMENT
Resists compression:
• After 15 min: 4 MPa.
• After 24 hr: 13.5 MPa.
• After 7 days: 22 MPa (meets EN196-1).
Setting time: 4-5 min.
Open time: 2-3 min.
Colour: powder grey.
Lifetime: 3 years if stored closed in original packaging and protected from humidity.

Very quick setting, especially suited for use by professionals.
Bucket with carry handle for easy transport.
Reference
(kg)
BIZ 740 123
5
Packaging type
Bucket
QUICK-SET PLASTER
Setting time: 20 min.
Open time: 3-6 min.
Colour: white powder.
Lifetime: 3 years if stored closed in original packaging and protected from humidity.

250
Very quick setting, especially suited for use by professionals.
Bucket with carry handle for easy transport.
Reference
(kg)
BIZ 740 122
6
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Packaging type
Bucket
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
ACCESSORIES FOR COATING AND PLASTERS
BROWN PLASTIC TROUGH
Reference
BIZ 700 174
BLACK RUBBER TROUGH
Reference
BIZ 700 493
RECTANGULAR PLASTIC FLOAT, 270 X 180 MM
Reference
BIZ 700 173
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
CAT TONGE SHAPED TROWEL 16 CM
BIZ 700 171
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
251
ROUND ITALIAN TROWEL 22 CM
Reference
BIZ 700 172
SQUARE ITALIAN TROWEL 22 CM
Reference
BIZ 700 177
BUILDING KIT
Kit includes:
•
•
•
•
1
1
1
1
float (BIZ 700 173).
cat tongue shaped trowel (BIZ 700 171).
Italian trowel (BIZ 700 172).
trough.
Reference
BIZ 700 179
BRICKLAYER'S KIT
Kit includes:
•
•
•
•
1
1
1
1
club hammer 1.5 kg (BIZ 700 075).
cold chisel.
pointed chisel.
trough.
Reference
252
BIZ 700 106
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
CLEANING MATERIAL
BROOM HEAD 29 CM
Broom head supplied without handle.
Indoor/outdoor.
Fiber: pure vegetal coco.
One-piece wood frame.
Built-in polypropylene screw socket 24 mm Ø.
Reference
Length (cm)
BIZ 730 920
29
BROOM HEAD 60 CM
Broom head supplied without handle.
Indoor/outdoor.
Wood frame.
Slanted galvanised metal socket 28 mm Ø.
Reference
Length (cm)
BIZ 730 921
60
BROOM HANDLE Ø 24 MM
Wood handle.
Polypropylene 24 mm Ø screw bit.
Stick fitted with a polypropylene fastener.
Reference
Length (cm)
BIZ 730 922
130
BROOM HANDLE Ø 28 MM
28 mm Ø tip for metal socket.
Maritime pine wood handle with a fastener.
Reference
Length (cm)
BIZ 730 923
140
TELESCOPIC BROOM HANDLE
Reference
Length (cm)
BIZ 730 924
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Material: epoxy lacquered metal.
Polypropylene 24 mm Ø screw bit.
Rotating polypropylene fastener.
2 x 75
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
253
CLEANING MATERIAL
BANISTER BRUSH
Indoor/outdoor.
Frame: wood with fastening hole.
Short handle.
Reference
Length (cm)
BIZ 730 926
29
DUSTPAN
Handle: wood with hanging hole.
Material: zinc-plated metal.
Reference
Length (cm)
Width (cm)
21.7
11
BIZ 730 925
BIN BAG
With closing tie.
Material: recycled low density PE.
Reference
Height (cm)
Width (cm)
Thickness (μ)
Colour
Quantity
120
50/32
60
Black
Roll of 15 bags
BIZ 730 927
RUBBLE BAGS
Material: polyethylene.
Reference
BIZ 700 214
Useful volume (l)
Maximum load (kg)
Height (cm)
Width (cm)
Colour
ur
Quantity per bag
50
50
95
55
White
10
Useful volume (l)
Maximum load (kg)
Height (cm)
Width (cm)
Colour
our
Quantity
Q
per bag
50
50
90
55
White
10
Thickness (μ)
Length (m)
Width (m)
Reel width (m)
Surface (mm²)
Packaging type
50
50
3
1.5
150
Roll
WOVEN RUBBLE BAGS
Reference
BIZ 700 215
POLYETHYLENE FILM
To protect floors, walls, furniture, etc.
Material: low density PE 100 % virgin material.
Reference
BIZ 730 928
254
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HYGIENE
SOLVENT FREE WORKSHOP CREAM
For industry in general, maintenance, workshops.
Quickly and effectively removes lubricant, resin, brake dust and dye type dirt.
Can with built-in doser.
Low odour.
pH: 6.

»
Micro beads for effective, nonaggressive cleaning.
Solvent free.
Non-perfumed.
Biodegradable (more than 90 %).
NFT 73101
Reference
Colour
BIZ 751 020
Green
CLEANING HAND WIPES
Cleaning hands and dirt such as: paint, resins, adhesives, lubricants, oils, diesel, tar, bitumen,
inks, waxes, grass, coal and graphite.
Impregnated wipes.
Lifetime: 24 months from date of manufacture.

Solvent free.
Used without water.
Strong paper (42 g/m²), biodegradable and hypoallergenic.
Reference
Width (mm)
Length (mm)
Colour
Grammage (g/m²)
Quantity per pot
266
200
Red
42
70
BIZ 751 010
WIPING ROLL
Pack of 2 rolls.
Material: pure white cellulose.
Dimension of a sheet W x L: 300 mm x 210 mm.
Number of plies: 2.
Sheet weight: 2 g x 20 mm2.
Pack of 1000 sheets per roll.

Central and lateral dispensing.
Reference
Colour
BIZ 751 030
White
WALL-MOUNT ROLL DISPENSER
Reference
BIZ 751 031
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Fixing type
Length (mm)
Height (mm)
Wall
400
520
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Supplied with fixings.
Epoxy-coated wall dispenser.
Fold-up ABS flap.
255
STOWAGE
STRAPS WITH TIGHTENING BUCKLE
For strapping and stowing light loads on trailers, galleries, etc.
»
EN 12195-2
Reference
Length (m)
Width (mm)
Breaking load (daN)
Colour
BIZ 730 930
1.5
25
400
Yellow
BIZ 730 931
3
25
400
Black
1 PART STRAP WITH RATCHET
Fitted with a ratchet tensioner.
For strapping and stowing medium loads on trailers, galleries, etc.
Material: polyester.
»
EN 12195-2
Reference
Length (m)
Width (mm)
Breaking load (daN)
Colour
5
25
1600
Black
BIZ 730 932
2 PART STRAP WITH RATCHET
Strap 1 fitted with a ratchet tensioner and a claw hook.
Strap 2 fitted with a claw hook.
For strapping and stowing medium loads on trailers, galleries, etc.
Material: polyester.
»
EN 12195-2
Reference
BIZ 730 933
Length (cm)
Width (mm)
Breaking load (daN)
Colour
40 + 460
25
800
Black
SET OF 12 BUNGEE CORDS
Set includes:
•
•
•
•
•
•
2
2
1
4
1
2
bungee cords length 45 cm.
bungee cord length 75 cm.
adjustable bungee cord length 75 cm.
universal bungee cords length 16 cm.
For easy transport and storage of various types of equipment (trunking, rails, posts, etc.).
Reference
256
BIZ 700 219
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
WORKSHOP FURNITURE
"OPTIMUM" WORKSHOP FURNITURE
Specially designed for workshop storage, Bizline workshop range provides maximum modularity for minimum space consumption.
Modular:
You adapt the number and type of units, shelves and storage units to suit your needs.
Progressive:
You can fix different types of unit to the side or on top.
Economical:
You don’t have to order what you don’t need.
Made entirely of 10/10 e sheet steel, finished in epoxy paint, it adapts to every need and every storage situation.
UNITS
• BIZ 730 901: 3-drawer unit supplied with two keys. Can take up to five fixed
or sliding shelves.
• BIZ 730 902: simple empty units, supplied without shelf.
Steel sheet thickness: 10/10e mm.
Colour: RAL 7001.
Reference
L x H x D (mm)
Useful L x H x D (mm)
Maximum load per shelf (kg)
Maximum load per drawer (kg)
BIZ 730 902
800 x 600 x 350
N/A
45
N/A
BIZ 730 901
800 x 600 x 350
708 x 269 x 172
N/A
45
SHELVES
Reference
Shelf's useful dimensions (mm)
Type
Maximum load (kg)
BIZ 730 903
708 x 331
Sliding shelf with handle
45
BIZ 730 904
742 x 331
Fixed
45
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Shelves for simple units: fixed or sliding in 10/10e sheet steel.
Shelves may be divided: BIZ 730 908 (Shelf separator, sold individually).
7 separators per shelf maximum.
Colour: RAL 3002.
257
WORKSHOP FURNITURE
THREADED ROD KIT
Set of two items for storing threaded rods.
Colour: RAL 7001.
Reference
BIZ 730 907
KIT OF 10 HOOKS
Lot of 10 hooks for fitting to the side walls of the simple or 3-drawer units.
Reference
Length (mm)
BIZ 730 910
50
SHELF SEPARATORS
Longitudinal separator for fixed or sliding shelf.
Colour: RAL 3002.
Sold individually.
Reference
BIZ 730 908
DRAWER SEPARATOR KIT
Lot of 14 separators for 3 drawers unit.
Kit includes:
• 4 longitudinal separators.
• 4 intermediate separators.
• 6 small separators.
Colour: RAL 3002.
Sold in a pack of 14.
Reference
258
BIZ 730 909
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
WORKSHOP FURNITURE
BACK PANEL
BizLine back panel.
Colour: RAL 7001.
Reference
BIZ 730 911
SET OF TWO WALL BRACKETS
Set of two depth-adjustable wall brackets.
Colour: RAL 7001.
Supplied without wall fixings.
Reference
BIZ 730 906
SET OF FOUR ADJUSTABLE FEET
Set of four feet for single or 3-drawer unit.
Reference
Maximum load (kg)
BIZ 730 905
450
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
259
PROTECTION,
SAFETY
AND SIGNS
260
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
WORKWEAR
P.262
FEET PROTECTION
P.265
HEAD PROTECTION
P.267
EYES PROTECTION
P.270
RESPIRATORY PROTECTION
P.271
EARS PROTECTION
P.272
HANDS PROTECTION
P.273
SAFETY KITS
P.276
SAFETY SIGNS
AND LOCKOUT/TAGOUT
P.276
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
261
WORKWEAR
SNICKERS WORK TROUSERS
Category I.
Mixture of 60 % cotton/40 % polyester, 340 g/mm².
Kneepad inserts and trousers bottoms reinforced with Cordura®*.
Multiple pockets: two gusseted back pockets for greater comfort, telephone pocket, side
pockets.
Canvas+TM mesh, 2 x 2 cross web fabric for greater strength and durability.
Colour: grey.
**High-technology polyamide fibre fabric, extremely strong and resistant against wear and
abrasion.

Very durable fabric.
Comfortable and functional:
• Knee pads inserted from the top.
• Patented design enabling them to be positioned at two different heights.
Reference
French size
Swedish size
BIZ 730 798
38
44
BIZ 730 799
40
46
BIZ 730 800
42
48
BIZ 730 801
44
50
BIZ 730 802
46
52
BIZ 730 803
48
54
ACCESSORY
SNICKERS KNEE PADS
Double-layer knee pads, flexible and ventilated on the inside, wear resistant outer layer.
100 % polyethylene.
Single size.
Color: yellow/black.

»
Flexible and wrapping around the knee, they perfectly protect your knees against hygroma.
EN 14404 + A1
Reference
BIZ 730 810
BIZLINE WORK JACKET
Category I.
100 % cotton, 290 g/m².
Adjustable, self-supporting waist band.
Front zip under Velcro flap.
Multiple pockets: breast, front, cell phone pocket sewn on to the sleeve.

262
Gusseted back for comfort, giving greater ease of movement.
Reference
Colour
BIZ 730 855
Black
S
BIZ 730 856
Black
M
BIZ 730 857
Black
L
BIZ 730 858
Black
XL
BIZ 730 859
Black
XXL
BIZ 730 885
Beige/black
S
BIZ 730 886
Beige/black
M
BIZ 730 887
Beige/black
L
BIZ 730 888
Beige/black
XL
BIZ 730 889
Beige/black
XXL
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Size
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
WORKWEAR
BIZLINE WORK TROUSERS
Category I.
100 % cotton, 290 g/m².
Knee pad inserts reinforced with Cordura®*.
Multiple triple overlocked reinforced pockets: cargo pocket, rule pocket, gusseted front
pockets.
* High-technology polyamide fiber fabric, extremely strong and resistant against wear and
abrasion.

Triple overlocked reinforced pockets.
Elasticated waist and wide belt loops.
Ample cut for easier movement.
Reference
Colour
Size
BIZ 730 840
Black
38
BIZ 730 841
Black
40
BIZ 730 842
Black
42
BIZ 730 843
Black
44
BIZ 730 844
Black
46
BIZ 730 845
Black
48
BIZ 730 846
Black
50
BIZ 730 809
Beige/black
38
BIZ 730 811
Beige/black
40
BIZ 730 812
Beige/black
42
BIZ 730 813
Beige/black
44
BIZ 730 814
Beige/black
46
BIZ 730 815
Beige/black
48
BIZ 730 816
Beige/black
50
ACCESSORY
BIZLINE KNEE PADS
Flexible, cushioned knee pads.
Dual density vinyl acetate copolymer.
Single size.

»
Light and comfortable, they protect your knees against hygroma.
EN 14404
Reference
BIZ 730 835
YELLOW 3-BAND SAFETY VEST
Category II.
Fluorescent 120 g/m² polyester mesh and class 2 reflective bands.
Self-supporting waist band closure.
EN 471
»
EN 471 2
2
Reference
Size
BIZ 730 831
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
XL
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
263
WORKWEAR
SOFTSHELL JACKET
For genuine protection against climatic contingencies (cold, rain, fine snow and wind).
330 g/m² softshell jacket composed of:
• An outer layer: 96 % polyester and 4 % Spandex®.
• A central layer: a membrane, with a TPU breathing film, ensuring 8000 mm water resistance
and 800 mvp breathability.
• An inner layer: microfleece.
Waist cord.
Adjustable wrists.
Multiple zip pockets.
Reflective biases.
Colour: grey/black.

Regulates temperature.
Evacuates perspiration.
Freedom of movement.
Reference
Size
BIZ 730 865
M
BIZ 730 866
L
BIZ 730 867
XL
BIZ 730 868
XXL
FLEECE SWEATER
100 % polyester 540 g/m² anti-pilling fleece.
100 % nylon contrasted panels on the sleeves.
Plastic YKK zip lock.
Knitted base and wrists.
Hand-warmer side pockets.
Colour: black.

Comfortable and warm.
Outer anti-pilling treated.
Reference
Size
BIZ 730 875
M
BIZ 730 876
L
BIZ 730 877
XL
BIZ 730 878
XXL
BODY WARMER
Outside: 100 % tear-proof nylon, water-resistant polyurethane coating.
Inside: fleece lined 100 % polyester anti-pilling 280 g/m².
Colour: black.

Comfortable and warm: ﬂeecy lining.
Multiple zip and Velcro pockets.
Reference
Size
BIZ 730 895
264
M
BIZ 730 896
L
BIZ 730 897
XL
BIZ 730 898
XXL
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
FEET PROTECTION
OREGA SHOES S1P-SRC
Anti-puncture midsole in polymer composite.
Category II.
Upper: mesh and cow split leather.
Microfiber front reinforced with triple seam.
Polyester lining, high density MTP foam.
Removable fitted insole, antibacterial and antistatic with vibration damping system.
Wide protective toe cap in polymer composite.
Non-metallic anti-puncture midsole in Layertex and comfort layer in EVA.
Rubber/nitrile outsole.
Weight: 1.01 kg (size 42).
Colour: beige.

»
Optimum comfort, especially when spending a long time kneeling, due to a very thin, ﬂexible
sole, to a lightweight wide polymer toe-cap and a non-metallic puncture-resistant midsole.
Ideal for working indoors.
Textile mesh ensuring foot respiration and better evacuation of perspiration.
Front microﬁber reinforcement for additional wear resistance.
EN ISO 20345 + amendments
Reference
Size
BIZ 730 354
37
BIZ 730 355
38
BIZ 730 356
39
BIZ 730 357
40
BIZ 730 358
41
BIZ 730 359
42
BIZ 730 360
43
BIZ 730 361
44
BIZ 730 362
45
BIZ 730 363
46
BIZ 730 364
47
APPALACHES SHOES S1P-SRC
Category II.
Upper: cow split leather.
Removable fitted insole. Antibacterial with integrated vibration damping system.
Non-metallic anti-puncture midsole in Layertex and comfort layer in EVA.
Colour: brown.

Reference
Size
BIZ 730 340
38
BIZ 730 341
39
BIZ 730 342
40
BIZ 730 343
41
BIZ 730 344
42
BIZ 730 345
43
BIZ 730 346
44
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
»
Increased comfort from the wide polymer toe cap, lighter than steel.
Great ﬂexibility and lightness from the non-metallic puncture-resistant midsole which is also
thermally non-conductive.
Rubber/nitrile outsole providing excellent grip on the ground.
Front microﬁbre reinforcement for added wear resistance.
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
265
FEET PROTECTION
Reference
Size
BIZ 730 347
45
BIZ 730 348
46
BIZ 730 349
47
IMPACT SHOES S3
Category II.
Upper: mesh and cow split leather.
Polyester mining, high density MTP foam.
Removable fitted insole. Anti-bacterial and antistatic with integrated vibration damping
system.
Non-metallic, puncture-resistant midsole in Layertex 5 and EVA comfort layer.
Colour: black.

»
Increased comfort from the wide polymer toe cap, lighter than steel.
Great ﬂexibility and lightness from the non-metallic puncture-resistant midsole which is also
thermally non-conductive.
Multi-purpose, for indoor and outdoor applications, due to its protection against water
penetration and excellent grip.
Cow split leather front for a good wear resistance.
Reference
Size
BIZ 730 325
37
BIZ 730 326
38
BIZ 730 327
39
BIZ 730 328
40
BIZ 730 329
41
BIZ 730 330
42
BIZ 730 331
43
BIZ 730 332
44
BIZ 730 333
45
BIZ 730 334
46
BIZ 730 335
47
CARPATES SHOES S3
Steel anti-puncture midsole.
Category II.
Upper: leather.
Lace fastening with reinforced eyelets.
Removable fitted insole. Antibacterial with integrated vibration damping system.
Wide protective toe cap.
Metallic puncture-resistant midsole in low density polyurethane.
Double density polyurethane outsole.
Colour: black.

»
266
Back-reﬂective strips on the sides and front of the shoe.
Reference
Size
BIZ 730 370
38
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
FEET PROTECTION
CARPATES SHOES S3
Reference
Size
BIZ 730 371
39
BIZ 730 372
40
BIZ 730 373
41
BIZ 730 374
42
BIZ 730 375
43
BIZ 730 376
44
BIZ 730 377
45
BIZ 730 378
46
BIZ 730 379
47
HEAD PROTECTION
HELMETS AND CAPS
BUMP CAP
Cap with internal shell to protect against superficial knocks and injuries.
Ideal for indoor work and working in confined spaces.
Protects the user when bumping into hard, static objects that could cause superficial injuries.
Category III.
ABS shell with foam for comfort.
Side ventilation.
Hook and loop strip adjustment.
Size 54 to 59.
Fabric: 100 % cotton.
Colour: black.

»
Removable shell: allows the cap to be cleaned.
EN 812
Reference
BIZ 730 220
STANDARD SAFETY HELMET
Protection against impacts and falling objects.
Category III.
Polyethylene helmet.
Plastic harness with 6 points adjustable by slide.
Adjustable size range: 52 to 61 cm.
Weight: 330 g.
Colour: white.
Additional optional tests:
»
• Electrical insulation: 440 VAC.
EN 397
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
BIZ 730 203
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
267
HEAD PROTECTION
HELMETS AND CAPS
ELECTRICIAN'S HELMET WITH INTEGRATED SPECTACLES
Protection against impacts, falling objects and electrical insulation.
Category III.
ABS safety helmet.
Deformable shell for optimum impact absorption.
4-point textile harness with slide adjustment.
Weight: 310 g.
Colour: white.
• High temperature test: +90 °C.
Clear polycarbonate spectacles.
Optical class 1.
Impact resistance: scale F (162 km/h).

Extremely light ABS helmet.
Integrated spectacles to avoid losing or forgetting them.
Optimum neck grip thanks to the special shape of the slide.
Good resistance to aging and to UV.
Can be used with head lamp BIZ 730 401 using ﬁxing hooks BIZ 730 420.
Can be used with protective visor BIZ 730 201.
»
Helmet:
- EN 397
- EN 50365: Electrical isolation 1000 V AC/1500 V DC
- ANSI Z89.A: Electrical isolation 20 000 V AC
»
Spectacles: EN 166
Reference
BIZ 730 204
IDRA HELMET WITH INTEGRATED FULL FACE VISOR
Integral protection of the eyes, face and head against electrical arcs, impacts, solid particles,
liquid and molten metal splashes.
Category III.
Polyamide safety helmet with integrated bubble visor.
Double shell in pressure-moulded polyamide.
Textile harness with chin strap, adjustable slip ratchet neck grip.
Weight: 620 g.
Colour: white.
• Low temperature test: -20 °C.
• Electrical insulation: 440 VAC.
Polycarbonate visor.
Optical class 2.
Impact resistance: scale B (432 km/h).

»
»
Lifting, integrated, anti-UV-treated, non-misting, non-scratch visor.
Can be used in conjunction with head lamp BIZ 730 401 which ﬁts on to the front of the helmet
(hole provided for the purpose).
Supplied with a bag and a fabric and plastic chinstrap.
Helmet: EN 397
Visor: EN 166 and EN 170
Reference
BIZ 730 210
SET OF 4 HELMET CLIPS
Clips for fixing headlight BIZ 730 401 on most helmets.
Material: polyamide.
Reference
268
BIZ 730 420
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HEAD PROTECTION
HELMETS AND CAPS
DIRECTIONAL HEADLIGHT WITH 4 LEDS
Headlight with removable, washable adjustable band.
For head size: min. 350 mm to max. 980.
Light source: 4 long-life LEDs 5 mm (do not change).
Illuminated area: 40 m² (new batteries).
Energy source: 3 LR03 batteries supplied (4.5 V).
Directional beam: 180°.
Materials:
• Body: polyamide + mineral.
• Front bumper: polyurethane.
• Shield: polycarbonate.
Size: 35 to 98 cm.

Flexible in use:
•
•
•
•
Headlight on band.
Free-standing.
Clipped to a helmet with a 20 x 3 mm groove.
Clipped on a belt or pocket.
Protection against accidental switch-on.
Shockproof.
Reference
BIZ 730 401
MULTI-SUPPORT 3-LEDS CLIP ON LAMP
Clip lamp with non-slip dual material jaws.
Clips on any support up to 36 mm thick.
Magnetic.
Stands on any flat surface (protective feet).
Light source: 3 long-life LEDs 5 mm (not to change).
Illuminated area: 40 m² (new batteries).
Energy source: 3 LR03 batteries supplied (4.5 V).
Directional beam: 180°.
Materials:
• Body: polyamide and mineral.
• Front bumper: polyurethane.
• Shield: polycarbonate.

Protection against accidental switch-on.
Anti-impact protection.
Flexible in use: magnetic, stands, clips.
Reference
BIZ 730 410
PROTECTIVE VISORS
PROTECTIVE VISOR FOR SAFETY HELMET BIZ 730 204

»
The necessary safety helmet accessory for protection against electrical arcs, solid particles
and liquid splashes.
Category III.
Lifting visor carrier in insulating plastic.
Fits to safety helmet BIZ 730 204.
Treated against UV, clear polycarbonate visor.
Allows simultaneous use of ear defenders.
Supplied with a protective bag.
EN 166-F8
Reference
(g)
BIZ 730 201
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
255
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
269
HEAD PROTECTION
PROTECTIVE VISORS
LIFTING PROTECTIVE VISOR MOUNTED ON HEADBAND
Protects the eyes and face from electrical arcs, solid particles and liquid splashes.
Category III.
Clear polycarbonate visor on polypropylene head band with forehead protector.
Slip ratchet adjustable headband.

»
Supplied with a protective bag.
EN 166-F8
Reference
(g)
BIZ 730 202
170
EYES PROTECTION
STANDARD SAFETY SPECTACLES
Category II.
Clear polycarbonate lenses.
Wraparound shape.
Impact resistant.
Black nylon frame.

»
Side arms adjustable for length.
Treated against scratching.
EN 166
Reference
Optical class
BIZ 730 303
1
SAFETY SPECTACLES WITH FLEXIBLE TIPS
Category II.
Wraparound shape.
Frame: black/red.

»
Tilting arms for optimum adjustment.
Flexible tips for increased comfort: avoid irritation and cutting feeling; ensure spectacles will
not slide and fall down the nose.
Treated against UV.
Supplied in protective case.
EN 166 and EN 170
Reference
Optical class
BIZ 730 300
270
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
1
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
EYES PROTECTION
OVERSPECTACLES
Category II.
Lenses and frame in clear polycarbonate.
Impact resistant.

»
Allows normal corrective spectacles to be worn underneath.
Maximum front and side protection: wide arms, forehead protection bar.
Resistant to impacts at extremes of temperature (-5 °C to +55 °C).
Treated against UV.
EN 166 and EN 170
Reference
Optical class
BIZ 730 301
1
GOGGLES
Protection against dust and impacts at extremes of temperature.
Drilling, sanding, grinding, etc.
Category II.
Flexible PVC frame with ventilation.
Impact resistant.

»
Allows normal corrective spectacles to be worn underneath.
Resistant to impacts at extremes of temperature (-5 °C to +55 °C).
Treated against UV.
EN 166 and EN 170
Reference
Optical class
BIZ 730 302
1
RESPIRATORY PROTECTION
FFP1 DISPOSABLE RESPIRATORY MASKS
Protection against large size, non-toxic particles and dust.
Sanding, grinding, sand-blasting, sawing, polishing, etc.
Category II.
Non-valved masks.

»
Folded masks in individual bag for easy storage and optimum hygiene.
With nose grip for a perfect ﬁt.
EN 149
Reference
Quantity
BIZ 730 310
5
FFP3 DISPOSABLE RESPIRATORY MASK

»
Protection against very fine, toxic dust particles (<0.2 μM).
Category II.
Valved mask.
Folded mask in individual bag for easy storage and optimum hygiene.
Valved for extra easy breathing with nose grip for a perfect ﬁt.
EN 149
Reference
Quantity
BIZ 730 320
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
1
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
271
EARS PROTECTION
EAR DEFENDERS
Category II.
Sound attenuation: SNR = 23 dB.
H: 27, M: 20, L: 13.
Polyoxymethylene band with ABS cups.
Elastomeric cushions.

»
Adjustable band.
Reduced lateral pressure (10.2 N) and elastomeric cushions for added comfort.
EN 352-1
Reference
BIZ 730 230
EARBAND
Category II.
H: 24, M: 16, L: 14.
»
EN 352-2
Reference
BIZ 730 231
EAR PLUGS ON STRING
Category II.
H: 36, M: 34, L: 33.

»
On string to allow the plugs to be kept around the neck without losing them.
Packed in pairs in an individual bag for maximum hygiene.
EN 352-2
Reference
Quantity
BIZ 730 232
272
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Box of 5 pairs
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HANDS PROTECTION
LEVEL 3 ANTI-CUT GLOVES
Handling of sheet metals, profiles, all cutting parts, even slightly greasy.
Category II.
Knitted gloves in polyethylene/polyamide thread.
Dyneema® fiber.
Polyurethane coating.
Colour: blue mottle/violet.
4/4 abrasion resistance.
3/5 resistance to cutting by slicing.
4/4 tear resistance.
3/4 resistance to puncturing.

»
Very good dexterity.
Flexible and comfortable.
Non-slip.
EN 388
4 3 4 3
Reference
Size
BIZ 730 123
9
BIZ 730 124
10
LEVEL 5 ANTI-CUT GLOVES
Maximum protection with wear indicator for work with a high risk of cuts.
Handling blades and cutting tools, sharp materials and glass.
Category II.
Knitted gloves in a stainless steel based composite fiber, with an internal orange thread wear
indicator.
With PVC dots on the palms.
Colour: mottled black/orange.
X resistance to puncturing.

• New glove: level 5 against cutting.
• Worn glove: level 3 against cutting.
Very good dexterity.
Flexible and comfortable.
EN 388
»
With wear indicator: visual check on the level of protection.
4 5 4 X
Reference
Size
BIZ 730 127
9
BIZ 730 128
10
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
273
HANDS PROTECTION
FINE HANDLING GLOVES
Handling and assembly of small parts, precision work, light handling, packing, maintenance.
Category II.
100 % polyamide knitted gloves.
Highly flexible polyurethane coating.
Colour: grey.

»
Excellent ease of movement.
Very ﬂexible and comfortable.
Excellent resistance to abrasion.
Waterproof palm and ﬁngers.
EN 388
4 1 2 1
Reference
Size
BIZ 730 121
9
BIZ 730 122
10
WET AND DRY HANDLING GLOVES
Intensive handling in wet environment (outdoor work) or dry environment
(all construction, wiring work).
Category II.
American cut gloves.
Glove and wrist reinforcement in water and oil resistant leather.
Elasticated knitted wrist.
Colour: beige.

»
Long life and performance: excellent resistance to abrasion and tearing.
Flexible and comfortable top grade leather.
Flexibility and comfort: no seams.
EN 388
3 1 2 2
Reference
274
Size
BIZ 730 129
9
BIZ 730 130
10
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HANDS PROTECTION
DRY HANDLING GLOVES
Heavy handling in dry environment.
Category II.
Cowhide palm, fabric back.
Colour: grey/red.

»
Robust, suitable for all heavy handling operations in dry environments.
EN 388
3 1 2 2
Reference
Size
BIZ 730 110
10
DISPOSABLE GLOVES
Any operation presenting a minor risk. Short duration work.
Category I.
Latex gloves. Rolled edge.
Disposable.
Fit either hand.
Non sterile.

»
Pre-powdered: limits the effects of sweating and makes putting on/taking off easier.
EN 420
Reference
Size
Quantity
9
Box of 100 gloves
Reference
Size
Quantity
BIZ 730 101
9-10
6 pairs
BIZ 730 115
COTTON UNDER GLOVES
Any operation presenting a minor risk.
Protection against dirt.
Category I.
100 % jersey cotton.
Flat cut with soft elasticated cuff.
Fits either hand.
Light and comfortable.
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

275
SAFETY KITS
SAFETY KIT
Kit contains:
•
•
•
•
Goggles BIZ 730 302.
Disposable respiratory masks FFP1 BIZ 730 310 (packed by 5).
Ear defenders BIZ 730 230.
Level 3 anti-cut gloves, size 9, BIZ 730 123.

The essentials you need for protecting yourself all in one kit.
Reference
BIZ 730 233
SAFETY SIGNS AND LOCKOUT/TAGOUT
ADHESIVES
Vinyl-reinforced adhesive labels.
Solvent and damp resistant: petrol C, toluene, trichloroethylene, acetone.
Packed in dispenser box, divisible into 2s (100 x 100) or 3s (50 x 50).
Reference
Type of sign
Dimensions (mm)
Quantity per box
BIZ 730 700
"Electrical hazard" triangle
50 x 50
30
BIZ 730 701
100 x 100
20
BIZ 730 710
"Danger of death" triangle
50 x 50
30
BIZ 730 711
100 x 100
20
PHOTOVOLTAIC SIGNS
Polymer vinyl reinforced adhesive labels.
Packaged in individual plastic bag.
To be affixed on the AC section of photovoltaic installations, the inverter and DC section, as
indicated by the diagram at the back of the sets of BIZ 730 725 and BIZ 730 726 adhesives.

Resistant to humidity.
Two plates available:
• One with all useful symbols,
• The other with the symbols used most often several times.
An installation diagram at the back of each plate.
Reference
Dimensions (mm)
Number of adhesives
BIZ 730 725*
136 x 216
11
BIZ 730 726*
136 x 235
9
* Only avalaible in French.
276
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
SIGNS AND NOTICES
Pre-drilled PVC signs and notices.
Thickness: 1 mm +/- 0.05 mm.
Tensile strength: 13 Mpa.
Class M1.
Elongation at tear: minimum 15 %.
With anti-UV protective varnish for indoor or outdoor use.

Easy to handle, these PVC signs and notices have no sharp edges and will not cut hands.
Will not yellow over time.
Reference
Designation
Dimensions (mm)
BIZ 730 720
100 x 100
Quantity
3
BIZ 730 721
100 x 100
3
BIZ 730 780*
"Danger, high voltage" sign
200 x 600
1
BIZ 730 730*
"First aid for electric shock" sign
350 x 500
1
BIZ 730 740*
"Safety instructions" sign
350 x 500
1
BIZ 730 750*
"General instructions" sign
350 x 500
1
LOCKOUT TAGS "DO NOT USE/MACHINE DISABLED"
In flexible polypropylene.
Outer Ø: 80 mm.
Ø for passing a cable tie: 10 mm.
Thickness: 0.3 +/- 0.05 mm.
Tensile strength:150-1300 Mpa.
Deformation at maximum load: 5-15 %.
Maximum load at break: 25-40 N/mm².
For indoor use.

Non-tear.
Reference
Quantity
BIZ 730 760*
3
LOCKOUT SIGNS "DO NOT USE/MACHINE DISABLED"
In flexible polypropylene.
Thickness: 0.3+/- 0.05 mm.
Tensile strength: 1150-1300 Mpa.
Deformation at maximum load: 5-15 %.
Maximum load at break: 25-40 N/mm².
For indoor use.
Non-tear.
Reference

Quantity
BIZ 730 770*
3
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
277
SITE MARKING TAPE
Non-adhesive PET tape.
Reference
BIZ 351 040
Floor marking of evacuation routes.
Identification of safety equipment areas (first aid equipment, fire point, etc.).
Identification of hazardous or flammable substances.
Adhesion: 1.2 N/cm.
Reference
BIZ 351 050
Marking of hazardous traffic routes in workshops.
Identification of mobile equipments.
Demarcation of areas with restricted passage.
Adhesion: 1.2 N/cm.
Reference
BIZ 351 051
LOCKOUT/TAGOUT SAFETY PADLOCK
Supplied with two identical keys (all padlocks with the same reference have the same key).
Disabling potentially dangerous machines and equipments during maintenance and repair
work.
Keyed alike padlock.
Reinforced, non-conductive nylon body.
Hardened steel shackle.
A = 37 mm.
B = 44 mm.
C = 38 mm.
D = 6.5 mm.
E = 20 mm.
F = 17 mm.

Insulated robust body.
Resistant to impacts, chemicals and corrosion.
Reference
278
Colour
BIZ 730 600
Red
BIZ 730 601
Red
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
BRASS PADLOCKS
30 MM BRASS COMBINATION PADLOCK
Three-digit code.
A = 30 mm.
B = 40 mm.
C = 26 mm.
D = 4.8 mm.
E = 16 mm.
F = 13 mm.
Reference
BIZ 700 572
30 MM BRASS KEY PADLOCK
Supplied with three keys.
Keyed different.
A = 30 mm.
B = 28 mm.
C = 17 mm.
D = 5.5 mm.
E = 18 mm.
F = 13 mm.
Reference
BIZ 700 570
40 MM BRASS KEY PADLOCK
Keyed different.
A = 40 mm.
B = 33 mm.
C = 23 mm.
D = 6.3 mm.
E = 23 mm.
F = 14 mm.
Reference
BIZ 700 571
40 MM HIGH SHACKLE BRASS KEY PADLOCK
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Keyed different.
A = 40 mm.
B = 33 mm.
C = 63 mm.
D = 6.4 mm.
E = 23 mm.
F = 15 mm.
BIZ 700 453
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
279
PLUMBING
AND SOLAR
APPLICATIONS
280
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
FASTENERS
P.282
SEALING
P.288
PLUMBING HAND TOOLS
P.293
PHOTOVOLTAIC ACCESSORIES
P.295
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
281
FASTENERS
FIXING FOR COPPER PIPES
STANDARD CLAMPS 7 X 150
Fitting clamps for copper pipes.
Threading 7 x 150.
Zinc-plated steel.
Reference
Metal clamps type
Tube Ø (mm)
Quantity per box
BIZ 400 020
Single
12
100
BIZ 400 021
Single
14
100
BIZ 400 022
Single
16
100
BIZ 400 023
Single
18
100
BIZ 710 181
Single
20
100
BIZ 400 024
Single
22
100
BIZ 400 025
Single
28
50
BIZ 400 026
Single
32
50
BIZ 400 027
Double
12
100
BIZ 400 028
Double
14
100
BIZ 400 029
Double
16
100
BIZ 400 030
Double
18
50
BIZ 400 031
Double
22
50
STANDARD CLAMPS 7 X 100
Fitting clamps for copper pipes.
Threading 7 x 100.
Zinc-plated steel.
Reference
282
Metal clamps type
Tube Ø (mm)
Quantity per box
BIZ 400 200
Single
10
100
BIZ 400 201
Single
12
100
BIZ 400 202
Single
15
100
BIZ 400 203
Single
18
100
BIZ 400 204
Single
20
100
BIZ 400 205
Single
22
50
BIZ 400 206
Single
28
50
BIZ 400 207
Double
10
100
BIZ 400 208
Double
12
100
BIZ 400 209
Double
15
50
BIZ 400 210
Double
18
50
BIZ 400 211
Double
20
50
BIZ 400 212
Double
22
50
BIZ 400 213
Double
28
50
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
FASTENERS
SOUNDPROOFING CLAMPS 7 X 150
Soundproofing metal clamps in zinc-plated steel for copper pipes.
Threading 7 x 150.
Zinc-plated steel.
Reference
Metal clamps type
Tube Ø (mm)
Quantity per box
BIZ 400 032
Single
12
100
BIZ 400 033
Single
14
100
BIZ 400 034
Single
16
100
BIZ 400 035
Single
18
100
BIZ 400 036
Single
22
100
BIZ 400 037
Single
28
50
BIZ 400 038
Single
32
50
BIZ 400 039
Double
12
100
BIZ 400 040
Double
14
100
BIZ 400 041
Double
16
50
BIZ 400 042
Double
18
50
BIZ 400 043
Double
22
50
SOUNDPROOFING CLAMPS 7 X 100
Reference
Metal clamps type
Tube Ø (mm)
Quantity per box
BIZ 400 214
Single
10
100
BIZ 400 215
Single
12
100
BIZ 400 216
Single
15
100
BIZ 400 217
Single
18
100
BIZ 400 218
Single
20
100
BIZ 400 219
Single
22
50
BIZ 400 220
Single
28
50
BIZ 400 221
Double
10
100
BIZ 400 222
Double
12
100
BIZ 400 223
Double
15
50
BIZ 400 224
Double
18
50
BIZ 400 225
Double
20
50
BIZ 400 226
Double
22
50
BIZ 400 227
Double
28
50
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Soundproofing metal clamps in zinc-plated steel for copper pipes.
Threading 7 x 100.
Zinc-plated steel.
283
FASTENERS
SPACING WASHERS
Conical spacing washers.
Zinc-plated steel.
Reference
Height (mm)
Quantity per box
BIZ 400 047
9
100
BIZ 400 048
14
100
BIZ 400 049
19
100
BIZ 400 050
24
100
SPACERS MALE/FEMALE 7 X 150
Threading 7 x 150.
Zinc-plated steel.
Reference
Dimensions (mm)
Quantity per box
BIZ 400 051
7 x 20
100
BIZ 400 052
7 x 30
100
BIZ 400 053
7 x 40
100
DOUBLE THREADED SCREWS 7 X 150
Double threaded screws for wood and metal.
Threading 7 x 150.
Zinc-plated steel.
Reference
284
Dimensions (mm)
Quantity per box
BIZ 400 044
7 x 40
100
BIZ 400 045
7 x 50
100
BIZ 400 046
7 x 60
100
BIZ 400 058
6 x 50
100
BIZ 400 059
6 x 70
100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
FASTENERS
DOUBLE THREADED SCREWS 7 X 100
Double threaded screws for wood and metal.
Threading 7 x 100.
Zinc-plated steel.
Reference
Dimensions (mm)
Quantity per box
BIZ 400 228
7 x 40
100
BIZ 400 229
7 x 60
100
METALLIC PLUGS
Zinc-plated steel.
Reference
Dimensions (mm)
Quantity per box
BIZ 400 054
6 x 37
100
BIZ 400 055
6 x 53
100
BIZ 400 056
6 x 66
100
FIXING FOR MULTILAYER PIPES
"CLIPEO" PLUG CLAMPS
Polyamide 6.
Reference
Drilling Ø (mm)
Tube Ø (mm)
Quantity per box
BIZ 710 240
8
16
100
BIZ 710 241
8
20
100
BIZ 710 242
8
25
100
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

285
FASTENERS
BIZRINGS
Polyamide 6.
Colour: white.

Secure fasteners.
Reference
Type
Drilling Ø (mm)
Tube Ø (mm)
BIZ 400 070
Single
8
15-16
Quantity per box
100
BIZ 400 071
Single
8
20
100
BIZ 400 072
Double
8
15-16
50
BIZ 400 073
Double
8
20
50
FIXING FOR PLASTIC PIPES
PLASTIC BIZCLIPS
For fixing pipes.
Polyamide 6.
Colour: grey.
Reference
Type
Drilling Ø (mm)
Quantity per box
BIZ 710 225
Single saddle
8
16
100
BIZ 710 226
Single saddle
8
20
100
BIZ 710 227
Single saddle
8
25
100
BIZ 710 332
Single saddle
8
32
50
BIZ 710 330
Double saddle
8
16
100
BIZ 710 228
Double saddle
8
20
100
BIZ 710 229
Double saddle
8
25
50
ACCESSORY
BAGCLIP PLUGS
For easy installation of "CLIPEO" and "BIZCLIPS" plugs in friable materials (drywalls, gypsum
tiles).
Polyamide 6.
Reference
BIZ 710 239
286
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Drilling Ø (mm)
Quantity per box
12
100
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
FASTENERS
MOUNTING KITS
SOLID WALL WATER HEATER KIT
Kit contains:
•
•
•
•
4
4
4
4
wood/metal dual thread screws in bichromated steel, 10 mm Ø x 120 mm.
polypropylene flat washers (will not deform the lugs on the water heater).
steel bolts and 4 steel washers.
plastic plugs, 14 mm Ø x 69 mm.
Reference
Drilling Ø (mm)
BIZ 710 140
14
WATER HEATER KIT FOR INSULATED HOLLOW WALLS
For insulated hollow materials.
Kit contains:
•
•
•
•
•
•
4
2
2
2
2
2
plastic plugs 16 Ø x 240 mm.
coach screws with welded washers, 12 mm Ø x 240 mm.
dual threaded screws 12 Ø x 280 mm with flats for easier screwing.
threaded load spreading washers.
nuts, 12 mm Ø.
washers, 12 mm Ø.

Clever system which reaches the second cell of the block or brick when using a 100 mm
maximum polystyrene-insulated plasterboard.
The load spreading washers avoid crushing the plasterboard.
Reference
BIZ 710 141
WATER HEATER KIT FOR NON-INSULATED HOLLOW WALLS
For non-insulated hollow materials.
Kit contains:
• 4 plastic plugs 14 Ø x 130 mm.
• 4 coach screws with welded washers, 10 Ø x 140 mm.
Clever system which reaches the second cell of the block or brick and produces a anchoring
equivalent to embedding in the structure itself.
The welded washer on the anchor bolt prevents it from forcing its way behind the lug on the
water heater.
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES

BIZ 710 142
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
287
SEALING
SILICONE SEALANTS
Resistant to mold and fungus growth.
For:
• Finishing joints and seals in damp premises (showers, bath tubs, sinks, kitchens),
• Sealing and finish seals in prefabrication, traditional construction and renovation, caulking
seal,
• Elastic cap in glazing/mirrors,
• Flexible glue of miscellaneous materials,
• Joinery framework finishing.
Skin forming time: 5 min (23 °C/50 % R.H.).
Curing speed: 3.5 mm/24 hr (23 °C/50 % R.H.).

Quick curing.
Permanent ﬂexibility.
Yellowing resistant.
Reference
Colour
Net volume (ml)
BIZ 710 212
White
300
BIZ 710 213
Transparent
300
CAULKING GUN
Aluminium handle.
No-drip function.
Fitted out with a ladder hook.
Reference
Length (mm)
310
230
BIZ 710 214
(g)
480
Aluminium handle.
No-drip function.
Reference
Length (mm)
330
400
BIZ 710 320
288
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
(g)
800
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
SEALING
Embossed PVC tape, natural rubber adhesive mass.
Easily moulded to shape.
General use.
Protection and retention of wires and cables.
Adhesion: 1.5 N/cm.

Water resistant.
Suitable for indoor and outdoor use.
Reference
Colour
BIZ 351 030
White
Aluminium tape, acrylic adhesive mass.
Joints in galvanised steel pipework.
Adhesion: 10 N/cm.

High adhesion.
Reference
Colour
BIZ 351 021
Aluminum
ABRASIVE STRIP
Abrasive strip for reaming metal and plastic.
Aluminium oxide doublebonded abrasive.
Very flexible strip for use on small diameters.
For all reaming, cleaning, rust removal and polishing work.
Cleaning pipes and connectors (copper, steel, PVC) before welding.
Grit: 80.
Dimensions: 38 mm x 25 m.

Resistant to clogging.
Suitable for use in a damp environment.
Can be cut by hand.
Reference
BIZ 400 017
PVC CLEANING SOLVENT
Reference
Net volume (ml)
BIZ 400 016
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Cleaning solvent for rigid PVC connectors.
Prepares surfaces before gluing by removing grease and eliminating dirt.
125
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
289
SEALING
GLUE FOR RIGID PVC PIPES
Glue for joining rigid PVC, ideal for use on both pressurized and evacuation pipe work.
Resists to hot and cold water and detergents.
Transparent.
Part of the approved product list for contact with drinking water.
Environmental approval IRH 06 CLP NY002.
Pressure resistance: 40 bars.
Setting time before use: For Ø up to 160 mm:
• Evacuation of waste water: 1 hr.
• Drinking water: 24 hr (rinse 30 minutes before putting into use).
• Water under pressure: 24 hr (1 hr for Ø up to 90 mm).
Storage temperature: -5 °C to +35 °C.
Operating temperature: +5 °C to +35 °C.

Drip proof.
Reference
Net volume (ml)
BIZ 400 015
500
PTFE TAPES
For sealing threaded connections in metal.
Dimensions: 12 mm x 12 m.
»
EN 751-3 for BIZ 400 010 and EN 751-3/6 for BIZ 400 011
Reference
Type
Thickness (mm)
Density (g/m²)
Applications
BIZ 400 010
Standard
0.075
30
For fine threads
BIZ 400 011
High density
0.1
80
For coarse or damaged threads
LINEN YARN
Extra-fine, combed linen yarn, retted in water.
Used with Bizline jointing compound (BIZ 400 013).

Economical: no waste when using, will not tangle or knot.
Approximately 100 joints (1,1/2 ”).
Easy to use: simply pull to select.
Practical: takes up little space, easy to store.
Reference
BIZ 400 012
290
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
Packaging type
(g)
80
Dispenser
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
SEALING
JOINTING COMPOUND FOR THREADED METAL JOINTS
Jointing compound for sealing threaded metal connectors. Use with Bizline linen yarn
(BIZ 400 012).
Compatible with drinking water installations: formulated from raw materials on the approved
lists (IRH environmental approval 07 CLP NY 003) and approval WRAS 0610513.
Pressure resistance: 200 bars with linen yarn.

»
Will not dry out, enabling an easy dismantling.
EN 751-2
Reference
(g)
BIZ 400 013
500
RESIN FOR THREADED METAL JOINTS
Anaerobic resin for threaded conic and cylindrical metal connectors.
All domestic hot and cold water pipe work.
Approved for contact with drinking water according to WRAS BS 6920.
Tested by the CSTB on domestic hot and cold water systems.
Work on clean, dry and de-greased connectors.
Apply the product to the first four threads of the male part.
Smooth out, assemble and tighten.
Operating temperature: -30 °C to 90 °C in a continue use, 110 °C peak.
Polymerization time: 1 hr to 3 hr.
Put back under pressure at 20 °C after: 15 minutes at 4 bars, 2 hours at 30 bars.
Maximum gap across the Ø: 0.25 mm.
»
EN 751-1 class H
Reference
BIZ 400 014
SEALS
FIBER WASHERS
Reference
Dimensions (mm)
Quantity per bag
BIZ 400 075
12 x 17
100
BIZ 400 076
15 x 21
100
BIZ 400 077
20 x 27
100
BIZ 400 078
26 x 34
100
BIZ 400 079
33 x 42
50
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
Thickness: 2 mm.
Maximum operating temperature: 80 °C.
291
SEALING
SEALS
GAS SEALS
Thickness: 2 mm.
Minimum operating temperature: -180 °C.
Maximum operating temperature:
• In continuous service: +250 °C.
• As a peak: +350 °C.
Pressure resistance: 100 bars.
Reference
Dimensions (mm)
Quantity per bag
BIZ 400 080
12 x 17
100
BIZ 400 081
15 x 21
100
BIZ 400 082
20 x 27
100
BIZ 400 083
26 x 34
100
BOX OF 720 FIBER WASHERS
Box of 720 fiber washers:
•
•
•
•
•
260 washers 12 x 17 mm.
Maximum operating temperature: 80 °C.
Reference
BIZ 400 085
GAS LEAK DETECTOR
Detects any gas or air leaks quickly on all types of tubing, valves, cylinders, pressure tanks
without interruption of use.
Usable on all types of systems under gas and air pressure without the formation of dangerous
compounds with carbon dioxide (CO2), propane, butane, acetylene, mains natural or coal gas,
nitrogen, nitrous oxide (N2O) or hydrofluoric carbide.
»
Complies with standard DIN-DVGW under NG-5170BS0303. Non-inflammable
Reference
292
BIZ 400 100
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
PLUMBING HAND TOOLS
PLUMBING PLIERS
LIFE
TIME
GUARANTEE
Box joint.
Reference
BIZ 400 007
Length (mm)
(g)
240
Opening Ø (mm)
7
10-32
200
SWEDISH S WRENCH
LIFE
TIME
GUARANTEE
Swedish 1” S wrench in Chrome Vanadium steel.
Forged from solid steel, no welding.
3 contact points.
Reference
Length (mm)
BIZ 400 002
Jaw opening (mm)
(kg)
416
1.3
38
STILLSON WRENCH
LIFE
TIME
GUARANTEE
18'' pipe wrench with a double heated-treated forged upper jaw and a lower jaw with seat
relieving the strain on the fixing pin.
Hardened adjusting wheel, monoblock handle.
Double spring provides immediate grip and perfect ratchet action.
Reference
Length (mm)
BIZ 400 003
Jaw opening (mm)
(kg)
450
1.8
61
LIFE
TIME
GUARANTEE

Opening Ø (mm)
BIZ 790 047
180
200
Self-adjustable
32
BIZ 790 048
250
390
Self-adjustable
40
Reference
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
Length (mm)
(g)
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

293
PLUMBING HAND TOOLS
PLUMBING TUBE CUTTERS
MINI TUBE CUTTER, 3-16 MM
LIFE
TIME
GUARANTEE
Al
Cu
Mini tube cutter for copper and aluminium.
Grooved rollers for cutting near flares.

Compact body and small size slides for working in conﬁned spaces.
Reference
BIZ 400 005
TELESCOPIC TUBE CUTTER, 3-32 MM
LIFE
TIME
GUARANTEE
Al
Cu
Telescopic tube cutter for copper and aluminium pipes.
Protected screw advance, grooved rollers for cutting near flares.
Integrated articulated de-burrer.
Supplied with spare wheel in the handle.
Reference
BIZ 400 018
INTERNAL-EXTERNAL REAMER
LIFE
TIME
GUARANTEE
Multi-use reamer for 6-42 mm copper pipes.
Weight: 0.03 kg.
Reference
BIZ 400 006
MANUAL CROSSBOW BENDER
LIFE
TIME
Manual crossbow bender for ductile copper, composites and mild steel tubing between 10
and 22 mm.
Supplied in case with formers from 12 to 22 mm (Ø 10/12/14/16/18/22).
Reference
ACCESSORY
GUARANTEE
BIZ 400 001
ROLLER FOR CROSSBOW BENDER
Aluminium roller for tubes 15 mm Ø.
Reference
294
BIZ 400 019
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
PHOTOVOLTAIC HAND TOOLS
AUTOMATIC STRIPPING PLIERS FOR SOLAR
LIFE
TIME
AND PHOTOVOLTAIC CABLES 1.5 TO 6 MM²
GUARANTEE
For stripping all current flexible cables in the solar technique sector, from 1.5 to 6 mm².
Fitted with a wire cutter (3 mm Ø maximum).

Fine adjustment with 5 positions ensures easy removal of the multilayer insulation in solar
cables.
Reference
Stripping capacity
BIZ 790 021
1.5-6 mm²
CRIMPING TOOL FRAME
LIFE
TIME
GUARANTEE
No crimping dies included.

»
Parallel crimping with approximate 1,000 kg (10,000 N) of contact pressure.
Tested over 2000 crimping cycles.
Crimping in compliance with standards EN 60352-2, EN 60999-1 and UL 486A
BIZ 700 260
Reference
ACCESSORY
CRIMPING DIES
High resistance phosphate finish steel crimping dies (HRC 35–55/HV 450–515).

EN 60352-2, EN 60999-1, UL 486A
Reference
BIZ 700 261
BIZ 700 262
sertissage_marteau
Applications
Section (mm²)
0.25-10
16-25
BIZ 700 263
0.5-2.5
BIZ 700 264
0.1-0.4/4-6
BIZ 700 265
Dies for tube lugs and end to end connectors
4-10
BIZ 700 266
Dies for non-insulated male and female clips
0.5-6
BIZ 700 267
Dies for computer connectors
RJ 45 8/8
BIZ 700 268
RJ11 6/6.6/4.6/2
BIZ 700 269
CATV RG6/RG59
BIZ 700 270
BNC RG58/RG59/RG62/RG71
BIZ 790 271
MC4
BIZ 790 272
MC3
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS
»
Interchangeable dies are kept together with a special pin to simplify handling and prevent loss.
295
DIES FOR ADAPTABLE CRIMPING PLIERS
Dies in HRC 35-55/HV 450-515 phosphate treated steel.

»
Integral dies to prevent loss.
EN 60352-2, EN 60999-1, UL 486A
Reference
Section (mm²)
Applications
BIZ 790 271
MC4
BIZ 790 272
MC3
SOLAR CONNEXION AND FASTENERS
EARTHING CLAMPS FOR PHOTOVOLTAIC INSTALLATIONS
Self-stripping clamps to implement the equipotential link between an earth cable and the
aluminum frame of the solar panel as recommended in the UTE 15-712-1 guide.
The claws penetrate under the anodic coating of the frame and the inner edges of the clamp
punctures the insulating material for optimum contact with the copper earth cable.
Earthing clamps for:
• Flexible multi-strand 6 mm² wire.
• System with 15 A maximum over intensity.
Suitable for all panels with an aluminum frame 1.5 to 2.5 mm thick and minimum 12 mm deep.
In C67S steel with Depton 20 to 30 μ surface treatment (based on zinc and tin).

Strip, connect and attach to the frame in a single operation.
Very high resistance in corrosive environments.
Excellent resistance to pull out value.
No drilling necessary.
Limits at the maximum the galvanic corrosion.
Reference
Quantity per bag
BIZ 710 368
500
BIZ 710 369
100
ACCESSORY
EARTHING CLAMP PLIER
Plier with a knob adjustment system guaranteeing the installation
of BIZ 710 368 and BIZ 710 369 earthing clamps on your solar panels.
Reference
296
BIZ 710 367
CABLING
AND INSTALLATION
ACCESSORIES
ACCESSORIES
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
HARDWARE
TAPES AND CHEMICALS
HAND TOOLS
For outdoor use, photovoltaic installations, etc.
Material: polyamide 6.6 with adjuvant guaranteeing resistance to UV radiation.

Anti-UV treatment.
Halogen free.
Reference
Colour
Length (mm)
Width (mm)
BIZ 340 001
Black
100
2.5
Maximum clamping
Ø (mm)
22
BIZ 340 003
Black
142
2.5
35
BIZ 340 005
Black
142
3.2
BIZ 340 007
Black
203
BIZ 340 009
Black
BIZ 340 011
BIZ 340 013
Thickness (mm)
Quantity per bag
80
1.12
100
80
1.22
100
34
180
1.17
100
2.5
55
80
1.22
100
203
3.6
52
180
1.17
100
Black
190
4.8
49
220
1.24
100
Black
292
3.6
82
180
1.17
100
BIZ 340 015
Black
300
4.8
83
220
1.24
100
BIZ 340 017
Black
368
4.8
105
220
1.24
100
BIZ 340 023
Black
380
7.6
105
550
1.91
100
BIZ 340 025
Black
203
7.6
52
550
1.91
100
BIZ 340 027
Black
762
9
227
800
1.8
100
SOLAR SAFETY SIGNS
PHOTOVOLTAIC SIGNS
Polymer vinyl reinforced adhesive labels.
Packaged in individual plastic bag.
To be affixed on the AC section of photovoltaic installations, the inverter and
DC section, as indicated by the diagram at the back of the sets of BIZ 730 725
and BIZ 730 726 adhesives.

Resistant to humidity.
Two plates available:
• One with all useful symbols,
• The other with the symbols used most often several times.
An installation diagram at the back of each plate.
Reference
Dimensions (mm)
Number of adhesives
BIZ 730 725*
136 x 216
11
BIZ 730 726*
136 x 235
9
POWER TOOLS AND
POWER
TOOLS AND
ACCESSORIES
ACCESSORIES
SITE AND WORKSHOP
SITE AND
WORKSHOP
EQUIPMENT
EQUIPMENT
PROTECTION, SAFETY
PROTECTION,
SAFETY
AND SIGNS
AND SIGNS
PLUMBING
PLUMBING
AND SOLAR
APPLICATIONS

297
INDEX BY REFERENCE
XXX
BIZ 000 100
BIZ 000 105
BIZ 000 110
BIZ 000 115
BIZ 000 120
BIZ 000 125
BIZ 000 130
BIZ 000 135
BIZ 000 140
BIZ 000 145
BIZ 000 150
BIZ 000 155
BIZ 000 160
BIZ 000 165
BIZ 000 170
BIZ 000 175
BIZ 000 180
BIZ 000 185
BIZ 000 190
BIZ 000 195
BIZ 000 200
BIZ 000 205
BIZ 000 210
BIZ 000 215
BIZ 000 220
BIZ 000 225
BIZ 000 230
BIZ 000 235
BIZ 000 240
BIZ 000 245
BIZ 000 250
BIZ 000 400
BIZ 000 405
BIZ 000 410
BIZ 000 415
BIZ 000 420
BIZ 000 425
BIZ 000 430
BIZ 000 435
BIZ 000 440
BIZ 000 445
BIZ 000 450
BIZ 000 455
BIZ 000 460
BIZ 000 465
BIZ 000 470
BIZ 000 475
BIZ 000 600
BIZ 000 602
BIZ 000 605
BIZ 000 610
BIZ 000 611
BIZ 000 612
BIZ 000 614
BIZ 000 615
BIZ 000 620
298
53
54
54
54
53
54
54
54
53
54
54
54
54
54
54
54
54
54
54
54
53
53
53
53
53
53
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
49
49
49
49
49
49
50
50
50
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
000 625
000 626
000 627
000 628
000 629
000 630
000 635
000 640
000 645
000 800
000 805
000 810
000 815
000 816
000 819
000 820
000 825
000 830
000 831
000 832
000 834
000 835
000 840
000 845
000 846
000 850
000 851
000 852
000 855
000 860
000 865
000 866
000 867
000 868
000 869
000 870
000 871
000 872
000 875
000 876
000 877
000 880
000 881
000 882
000 900
000 905
000 910
000 915
000 920
000 925
000 930
000 935
000 940
000 945
000 950
000 955
50
50
50
51
51
51
51
51
51
49
49
49
49
49
50
50
50
50
50
50
51
51
51
51
51
49
49
49
50
51
49
49
49
50
51
49
50
51
49
50
51
49
50
51
47
47
47
47
47
47
47
47
47
47
47
47
BIZ 000 960
BIZ 000 962
BIZ 000 964
BIZ 000 966
BIZ 000 968
BIZ 000 970
BIZ 000 972
BIZ 000 974
BIZ 000 976
BIZ 000 980
BIZ 000 982
BIZ 000 984
BIZ 000 986
BIZ 000 988
BIZ 111 809
BIZ 112 609
BIZ 113 609
BIZ 115 109
BIZ 117 609
BIZ 200 210
BIZ 200 215
BIZ 200 225
BIZ 200 235
BIZ 200 240
BIZ 205 009
BIZ 205 011
BIZ 205 013
BIZ 205 016
BIZ 205 021
BIZ 205 116
BIZ 205 120
BIZ 205 125
BIZ 206 007
BIZ 206 009
BIZ 206 011
BIZ 206 013
BIZ 206 016
BIZ 206 021
BIZ 206 029
BIZ 206 036
BIZ 206 042
BIZ 206 048
BIZ 206 112
BIZ 206 116
BIZ 206 120
BIZ 206 125
BIZ 206 132
BIZ 206 140
BIZ 206 150
BIZ 206 163
BIZ 207 007
BIZ 207 009
BIZ 207 011
BIZ 207 013
BIZ 207 016
BIZ 207 021
48
48
48
48
48
48
48
48
48
22
22
22
22
22
8
8
8
8
8
62
62
62
62
62
55
55
55
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
56
57
57
57
57
57
INDEX BY REFERENCE
XXX
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
207
207
207
207
207
207
207
207
209
209
209
209
209
209
209
209
209
209
209
210
210
210
210
210
210
210
210
210
210
210
210
210
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
029
036
112
116
120
125
132
140
007
009
011
013
016
021
029
036
042
048
112
010
012
016
020
030
108
115
120
125
208
215
220
225
001
002
003
004
005
006
007
008
011
012
013
014
015
016
017
018
021
022
023
024
025
026
027
028
POWER TOOLS AND
ACCESSORIES
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
61
61
61
61
61
62
62
62
62
62
62
62
62
58
58
58
58
58
58
58
58
58
58
58
58
58
58
58
59
59
59
59
59
59
59
59
59
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
215
216
216
216
216
216
216
216
216
216
216
216
216
217
217
217
217
217
217
218
218
218
218
218
218
218
219
219
225
225
225
225
225
225
225
225
225
225
225
225
225
031
032
033
034
035
036
037
038
041
042
043
044
045
046
047
048
001
002
003
021
022
023
031
032
033
041
042
043
001
002
003
004
005
006
001
002
003
004
005
006
007
001
002
001
002
003
004
005
006
007
008
009
010
033
050
051
SITE AND WORKSHOP
EQUIPMENT
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
59
61
61
61
61
61
61
61
61
61
61
61
61
59
59
59
59
59
59
60
60
60
60
60
60
60
60
60
47
47
47
47
47
47
47
47
47
47
97
48
48
BIZ 225 052
BIZ 225 053
BIZ 225 101
BIZ 225 102
BIZ 225 103
BIZ 225 104
BIZ 225 105
BIZ 230 000
BIZ 230 001
BIZ 230 002
BIZ 230 003
BIZ 230 004
BIZ 230 005
BIZ 230 006
BIZ 230 010
BIZ 230 011
BIZ 230 012
BIZ 230 013
BIZ 230 014
BIZ 230 018
BIZ 230 019
BIZ 230 020
BIZ 230 021
BIZ 230 022
BIZ 230 023
BIZ 230 025
BIZ 230 026
BIZ 230 027
BIZ 230 028
BIZ 230 029
BIZ 230 030
BIZ 230 031
BIZ 230 032
BIZ 230 033
BIZ 230 034
BIZ 230 035
BIZ 230 036
BIZ 230 037
BIZ 230 038
BIZ 230 039
BIZ 230 040
BIZ 230 041
BIZ 230 042
BIZ 230 043
BIZ 230 044
BIZ 235 001
BIZ 235 002
BIZ 235 003
BIZ 235 010
BIZ 235 020
BIZ 235 030
BIZ 235 040
BIZ 235 051
BIZ 235 052
BIZ 235 054
BIZ 240 001
PROTECTION, SAFETY
AND SIGNS
48
48
47
47
47
47
47
49
49
49
49
49
49
50
50
50
50
50
50
51
51
51
51
51
51
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
53
49
49
49
50
51
49
50
49
49
51
49
PLUMBING
299
INDEX BY REFERENCE
XXX
BIZ 240 010
BIZ 240 020
BIZ 241 001
BIZ 241 010
BIZ 241 020
BIZ 245 001
BIZ 245 020
BIZ 245 030
BIZ 250 000
BIZ 250 001
BIZ 251 000
BIZ 251 001
BIZ 251 002
BIZ 251 003
BIZ 251 004
BIZ 251 005
BIZ 252 001
BIZ 252 002
BIZ 252 003
BIZ 252 004
BIZ 252 005
BIZ 253 000
BIZ 253 001
BIZ 253 002
BIZ 253 003
BIZ 253 004
BIZ 300 001
BIZ 300 002
BIZ 300 003
BIZ 300 004
BIZ 300 005
BIZ 300 006
BIZ 300 007
BIZ 300 008
BIZ 300 009
BIZ 300 010
BIZ 300 011
BIZ 300 012
BIZ 300 013
BIZ 300 014
BIZ 300 015
BIZ 300 016
BIZ 300 017
BIZ 300 018
BIZ 300 019
BIZ 300 020
BIZ 300 021
BIZ 300 022
BIZ 300 023
BIZ 300 024
BIZ 300 025
BIZ 300 026
BIZ 300 027
BIZ 300 028
BIZ 300 100
BIZ 300 101
300
50
51
49
50
51
49
50
51
52
52
49
49
49
49
49
50
50
50
50
50
50
51
51
51
51
51
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
11
11
11
11
9
9
9
9
9
9
10
10
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
102
103
104
105
110
111
306
307
308
309
310
311
402
403
404
405
406
408
422
433
444
455
488
490
491
499
503
025
026
027
028
029
030
031
032
033
034
035
036
037
038
039
040
041
042
043
044
045
046
047
048
049
050
051
052
053
10
10
10
10
10
10
22
22
23
23
23
24
23
23
23
23
23
23
22
22
22
22
22
24
24
22
24
12
12
12
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
310
054
055
056
057
058
059
060
061
062
063
064
065
066
067
068
070
071
072
073
074
075
076
077
078
079
080
081
082
083
085
086
087
088
089
090
091
092
093
094
095
096
097
100
101
102
103
105
106
107
108
109
110
112
114
13
13
13
13
13
13
13
16
16
16
15
15
15
15
15
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
19
19
19
19
19
14
14
14
15
15
15
15
12
12
12
12
12
12
12
12
INDEX BY REFERENCE
XXX
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
310
310
310
310
310
310
310
310
310
310
310
310
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
320
330
330
330
330
340
340
340
340
116
119
125
150
151
152
200
201
202
300
301
302
001
002
003
004
005
006
007
008
009
010
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
101
102
103
104
105
106
107
108
109
110
001
002
003
004
001
003
005
007
POWER TOOLS AND
ACCESSORIES
9,
9,
9,
10,
12
12
12
12
12
12
15
15
15
18
18
18
20
20
20
20
20
20
20
20
20
20
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
21
20
20
21
21
21
21
21
21
21
21
25
25
25
25
297
297
297
297
BIZ 340 009
BIZ 340 011
BIZ 340 013
BIZ 340 015
BIZ 340 017
BIZ 340 023
BIZ 340 025
BIZ 340 027
BIZ 340 111
BIZ 340 113
BIZ 340 115
BIZ 340 117
BIZ 350 010
BIZ 350 012
BIZ 350 013
BIZ 350 014
BIZ 350 015
BIZ 350 016
BIZ 350 017
BIZ 350 018
BIZ 350 019
BIZ 350 091
BIZ 350 092
BIZ 350 093
BIZ 350 094
BIZ 350 095
BIZ 350 096
BIZ 350 097
BIZ 350 098
BIZ 350 099
BIZ 351 010
BIZ 351 011
BIZ 351 020
BIZ 351 021
BIZ 351 030
BIZ 351 040
BIZ 351 050
BIZ 351 051
BIZ 351 060
BIZ 351 070
BIZ 400 001
BIZ 400 002
BIZ 400 003
BIZ 400 005
BIZ 400 006
BIZ 400 007
BIZ 400 010
BIZ 400 011
BIZ 400 012
BIZ 400 013
BIZ 400 014
BIZ 400 015
BIZ 400 016
BIZ 400 017
BIZ 400 018
BIZ 400 019
SITE AND WORKSHOP
EQUIPMENT
10,
10,
10,
10,
10,
10,
10,
10,
99,
97,
100,
100,
100,
152,
152,
123,
297
297
297
297
297
297
297
297
9
9
9
9
96
96
96
96
96
96
96
96
96
96
96
96
96
96
96
96
96
96
98
98
98
289
289
278
278
278
99
99
294
293
293
294
294
293
290
290
290
291
291
290
289
289
294
294
BIZ 400 020
BIZ 400 021
BIZ 400 022
BIZ 400 023
BIZ 400 024
BIZ 400 025
BIZ 400 026
BIZ 400 027
BIZ 400 028
BIZ 400 029
BIZ 400 030
BIZ 400 031
BIZ 400 032
BIZ 400 033
BIZ 400 034
BIZ 400 035
BIZ 400 036
BIZ 400 037
BIZ 400 038
BIZ 400 039
BIZ 400 040
BIZ 400 041
BIZ 400 042
BIZ 400 043
BIZ 400 044
BIZ 400 045
BIZ 400 046
BIZ 400 047
BIZ 400 048
BIZ 400 049
BIZ 400 050
BIZ 400 051
BIZ 400 052
BIZ 400 053
BIZ 400 054
BIZ 400 055
BIZ 400 056
BIZ 400 058
BIZ 400 059
BIZ 400 070
BIZ 400 071
BIZ 400 072
BIZ 400 073
BIZ 400 075
BIZ 400 076
BIZ 400 077
BIZ 400 078
BIZ 400 079
BIZ 400 080
BIZ 400 081
BIZ 400 082
BIZ 400 083
BIZ 400 085
BIZ 400 100
BIZ 400 200
BIZ 400 201
PROTECTION, SAFETY
AND SIGNS
282
282
282
282
282
282
282
282
282
282
282
282
283
283
283
283
283
283
283
283
283
283
283
283
284
284
284
284
284
284
284
284
284
284
285
285
285
284
284
286
286
286
286
291
291
291
291
291
292
292
292
292
292
292
282
282
PLUMBING
301
INDEX BY REFERENCE
XXX
BIZ 400 202
BIZ 400 203
BIZ 400 204
BIZ 400 205
BIZ 400 206
BIZ 400 207
BIZ 400 208
BIZ 400 209
BIZ 400 210
BIZ 400 211
BIZ 400 212
BIZ 400 213
BIZ 400 214
BIZ 400 215
BIZ 400 216
BIZ 400 217
BIZ 400 218
BIZ 400 219
BIZ 400 220
BIZ 400 221
BIZ 400 222
BIZ 400 223
BIZ 400 224
BIZ 400 225
BIZ 400 226
BIZ 400 227
BIZ 400 228
BIZ 400 229
BIZ 500 000
BIZ 500 001
BIZ 500 002
BIZ 500 003
BIZ 500 004
BIZ 500 005
BIZ 500 006
BIZ 500 007
BIZ 500 008
BIZ 500 009
BIZ 500 013
BIZ 500 014
BIZ 500 016
BIZ 500 020
BIZ 500 025
BIZ 500 032
BIZ 500 040
BIZ 500 050
BIZ 500 067
BIZ 500 085
BIZ 500 100
BIZ 500 120
BIZ 500 132
BIZ 500 140
BIZ 500 141
BIZ 500 150
BIZ 500 154
BIZ 500 167
302
282
282
282
282
282
282
282
282
282
282
282
282
283
283
283
283
283
283
283
283
283
283
283
283
283
283
285
285
34
34
34
34
35
35
35
35
35
35
34
34
30
30
30
30
30
34
31
38
29
38
29
29
31
29
32
32
BIZ 500 240
BIZ 500 250
BIZ 500 340
BIZ 500 350
BIZ 500 440
BIZ 500 850
BIZ 501 210
BIZ 501 285
BIZ 501 500
BIZ 501 711
BIZ 502 000
BIZ 502 150
BIZ 502 240
BIZ 502 519
BIZ 502 525
BIZ 506 027
BIZ 510 067
BIZ 510 085
BIZ 510 100
BIZ 510 120
BIZ 510 130
BIZ 510 145
BIZ 512 627
BIZ 527 067
BIZ 527 128
BIZ 527 267
BIZ 544 085
BIZ 620 100
BIZ 620 101
BIZ 620 102
BIZ 620 103
BIZ 620 110
BIZ 620 111
BIZ 620 112
BIZ 620 113
BIZ 620 160
BIZ 620 161
BIZ 620 162
BIZ 625 006
BIZ 625 010
BIZ 625 011
BIZ 625 012
BIZ 625 013
BIZ 625 014
BIZ 625 015
BIZ 625 016
BIZ 669 180
BIZ 669 260
BIZ 669 360
BIZ 669 510
BIZ 669 760
BIZ 700 001
BIZ 700 002
BIZ 700 003
BIZ 700 004
BIZ 700 005
30
30
30
30
30
31
39
39
30
33
31
31
30
33
33
32
38
39
39
39
39
39
38
31
39
32
38
40
40
40
40
41
41
41
41
37
37
37
246
246
247
246
248
248
247
248
8
8
8
8
8
133
141
136
136
140
BIZ 700 006
BIZ 700 008
BIZ 700 009
BIZ 700 010
BIZ 700 011
BIZ 700 012
BIZ 700 013
BIZ 700 014
BIZ 700 015
BIZ 700 016
BIZ 700 017
BIZ 700 018
BIZ 700 019
BIZ 700 020
BIZ 700 021
BIZ 700 022
BIZ 700 031
BIZ 700 033
BIZ 700 034
BIZ 700 035
BIZ 700 036
BIZ 700 037
BIZ 700 038
BIZ 700 039
BIZ 700 040
BIZ 700 041
BIZ 700 042
BIZ 700 043
BIZ 700 044
BIZ 700 046
BIZ 700 047
BIZ 700 059
BIZ 700 063
BIZ 700 064
BIZ 700 066
BIZ 700 068
BIZ 700 069
BIZ 700 070
BIZ 700 071
BIZ 700 073
BIZ 700 075
BIZ 700 076
BIZ 700 078
BIZ 700 079
BIZ 700 080
BIZ 700 081
BIZ 700 082
BIZ 700 083
BIZ 700 085
BIZ 700 086
BIZ 700 087
BIZ 700 088
BIZ 700 089
BIZ 700 093
BIZ 700 095
BIZ 700 096
55,
55,
224,
224,
140
140
140
126
134
143
143
127
127
127
127
127
127
127
127
127
174
165
164
158
158
167
168
191
154
145
154
137
170
162
162
149
150
181
146
164
153
153
136
163
162
228
148
164
164
137
160
160
136
228
229
229
224
131
206
183
INDEX BY REFERENCE
XXX
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
099
100
101
102
103
106
107
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
145
146
147
148
149
150
151
152
153
155
156
157
158
160
161
162
163
164
165
166
POWER TOOLS AND
ACCESSORIES
167
167
224
224
224
252
179
155
146
146
146
146
146
146
146
146
146
146
146
146
146
146
232
232
233
234
234
234
233
233
233
233
234
235
235
235
232
232
232
235
236
236
234
235
235
236
236
236
236
145
145
145
145
145
145
145
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
167
168
169
170
171
172
173
174
175
177
178
179
180
181
183
184
185
186
187
188
191
194
196
197
198
199
200
201
202
203
205
206
207
208
209
210
211
212
213
214
215
216
219
220
221
222
223
226
227
228
229
230
231
233
234
235
SITE AND WORKSHOP
EQUIPMENT
145
145
145
145
251
252
251
251
159
252
154
252
206
231
149
213
213
139
153
153
147
205
202
214
215
215
215
133
134
148
172
170
222
222
136
137
156
165
112, 166
254
254
229
256
179
178
178
180
177
183
177
177
149
231
226
226
226
BIZ 700 236
BIZ 700 237
BIZ 700 238
BIZ 700 239
BIZ 700 240
BIZ 700 241
BIZ 700 242
BIZ 700 243
BIZ 700 244
BIZ 700 245
BIZ 700 246
BIZ 700 247
BIZ 700 248
BIZ 700 249
BIZ 700 250
BIZ 700 251
BIZ 700 252
BIZ 700 253
BIZ 700 254
BIZ 700 255
BIZ 700 256
BIZ 700 257
BIZ 700 258
BIZ 700 259
BIZ 700 260
BIZ 700 261
BIZ 700 262
BIZ 700 263
BIZ 700 264
BIZ 700 265
BIZ 700 266
BIZ 700 267
BIZ 700 268
BIZ 700 269
BIZ 700 270
BIZ 700 271
BIZ 700 272
BIZ 700 273
BIZ 700 274
BIZ 700 275
BIZ 700 276
BIZ 700 277
BIZ 700 278
BIZ 700 282
BIZ 700 283
BIZ 700 284
BIZ 700 285
BIZ 700 286
BIZ 700 287
BIZ 700 288
BIZ 700 289
BIZ 700 290
BIZ 700 291
BIZ 700 292
BIZ 700 293
BIZ 700 294
PROTECTION, SAFETY
AND SIGNS
227,
227,
227,
225,
225,
227,
227,
227,
227,
229,
227,
142,
142,
142,
142,
142,
142,
142,
142,
142,
142,
142,
55,
55,
226
229
229
229
227
227
229
229
226
228
228
239
227
230
230
226
228
228
230
230
230
230
228
228
295
295
295
295
295
295
295
295
295
295
295
143
143
143
143
222
171
140
133
223
158
158
158
158
158
158
158
158
158
158
157
157
PLUMBING
303
INDEX BY REFERENCE
XXX
BIZ 700 295
BIZ 700 296
BIZ 700 297
BIZ 700 298
BIZ 700 299
BIZ 700 300
BIZ 700 301
BIZ 700 302
BIZ 700 303
BIZ 700 304
BIZ 700 305
BIZ 700 306
BIZ 700 307
BIZ 700 308
BIZ 700 309
BIZ 700 310
BIZ 700 311
BIZ 700 313
BIZ 700 315
BIZ 700 381
BIZ 700 383
BIZ 700 384
BIZ 700 386
BIZ 700 388
BIZ 700 389
BIZ 700 390
BIZ 700 391
BIZ 700 392
BIZ 700 393
BIZ 700 394
BIZ 700 395
BIZ 700 396
BIZ 700 397
BIZ 700 398
BIZ 700 399
BIZ 700 400
BIZ 700 401
BIZ 700 402
BIZ 700 403
BIZ 700 404
BIZ 700 405
BIZ 700 410
BIZ 700 411
BIZ 700 412
BIZ 700 413
BIZ 700 414
BIZ 700 415
BIZ 700 416
BIZ 700 417
BIZ 700 418
BIZ 700 419
BIZ 700 420
BIZ 700 421
BIZ 700 423
BIZ 700 424
BIZ 700 425
304
168
168
125
150
150
124
124
124
156
146
146
146
146
146
146
146
171
157
160
170
170
171
171
174
172
227, 229
225
225
225
173
173
164
163
173
168
210
210
210
210
210
210
224
224
224
224
208
209
209
209
209
213
211
211
211
211
174
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
700 427
700 428
700 430
700 431
700 432
700 433
700 434
700 436
700 437
700 438
700 439
700 440
700 441
700 442
700 443
700 444
700 445
700 446
700 447
700 448
700 449
700 450
700 451
700 452
700 453
700 456
700 457
700 458
700 460
700 461
700 462
700 463
700 464
700 465
700 466
700 467
700 468
700 469
700 470
700 471
700 472
700 473
700 474
700 475
700 476
700 477
700 478
700 479
700 480
700 482
700 483
700 484
700 485
700 486
700 487
700 488
209, 211, 212,
209, 211, 212,
209,
135,
172
169
213
213
210
211
212
211
212
212
160
207
207
207
207
207
207
207
161
161
144
229
139
227
279
131
166
132
165
166
165
166
165
127
127
127
127
178
145
145
145
145
145
145
145
145
145
145
180
180
131
178
127
127
127
144
BIZ 700 489
BIZ 700 490
BIZ 700 491
BIZ 700 492
BIZ 700 493
BIZ 700 494
BIZ 700 495
BIZ 700 496
BIZ 700 500
BIZ 700 504
BIZ 700 505
BIZ 700 506
BIZ 700 507
BIZ 700 508
BIZ 700 509
BIZ 700 510
BIZ 700 516
BIZ 700 517
BIZ 700 519
BIZ 700 520
BIZ 700 523
BIZ 700 524
BIZ 700 525
BIZ 700 529
BIZ 700 531
BIZ 700 533
BIZ 700 534
BIZ 700 536
BIZ 700 538
BIZ 700 551
BIZ 700 554
BIZ 700 556
BIZ 700 560
BIZ 700 561
BIZ 700 569
BIZ 700 570
BIZ 700 571
BIZ 700 572
BIZ 700 573
BIZ 700 574
BIZ 700 575
BIZ 700 576
BIZ 700 577
BIZ 700 578
BIZ 700 579
BIZ 700 580
BIZ 700 581
BIZ 700 582
BIZ 700 583
BIZ 700 584
BIZ 700 585
BIZ 700 587
BIZ 700 588
BIZ 700 589
BIZ 700 590
BIZ 700 591
166
128
190
129
251
150
151
151
127
127
172
173
159
127
127
127
125
222
190
182
132
155
163
179
210
210
210
210
210
210
210
210
210
211
210
279
279
279
128
128
128
128
128
128
128
128
128
128
128
163
125
141
144
144
144
144
INDEX BY REFERENCE
XXX
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
592
593
594
595
596
597
598
599
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
POWER TOOLS AND
ACCESSORIES
144
144
144
144
144
144
149
123
200
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
201
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
650
651
652
653
654
655
656
657
658
660
661
662
663
664
665
666
667
668
669
670
671
680
681
682
683
684
685
686
687
690
691
692
693
694
695
696
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
SITE AND WORKSHOP
EQUIPMENT
200
200
200
200
200
200
200
200
200
202
202
202
202
202
202
202
202
202
202
203
203
202
202
202
202
202
202
202
202
203
203
203
203
214
214
214
206
204
204
204
204
204
204
204
204
204
204
204
204
204
204
204
204
204
204
204
BIZ 700 720
BIZ 700 721
BIZ 700 722
BIZ 700 723
BIZ 700 724
BIZ 700 725
BIZ 700 726
BIZ 700 727
BIZ 700 728
BIZ 700 729
BIZ 700 740
BIZ 700 741
BIZ 700 742
BIZ 700 743
BIZ 700 744
BIZ 700 745
BIZ 700 746
BIZ 700 747
BIZ 700 748
BIZ 700 749
BIZ 700 750
BIZ 700 751
BIZ 700 752
BIZ 700 753
BIZ 700 755
BIZ 700 757
BIZ 700 800
BIZ 700 802
BIZ 700 803
BIZ 700 805
BIZ 700 806
BIZ 700 808
BIZ 700 820
BIZ 700 822
BIZ 700 823
BIZ 700 824
BIZ 700 826
BIZ 700 827
BIZ 700 828
BIZ 700 830
BIZ 700 831
BIZ 700 835
BIZ 700 838
BIZ 700 841
BIZ 700 842
BIZ 700 843
BIZ 700 844
BIZ 700 845
BIZ 700 846
BIZ 700 847
BIZ 700 848
BIZ 700 849
BIZ 700 852
BIZ 700 853
BIZ 700 854
BIZ 700 855
PROTECTION, SAFETY
AND SIGNS
204
204
205
205
205
205
205
205
205
205
203
203
203
203
203
203
203
203
203
203
203
204
203
203
207
205
207
207
207
207
207
207
207
207
207
207
207
207
207
207
207
207
207
207
184
184
185
36
36
223
222
223
168
168
162
162
PLUMBING
305
INDEX BY REFERENCE
XXX
BIZ 700 856
BIZ 700 857
BIZ 700 860
BIZ 700 862
BIZ 700 863
BIZ 700 864
BIZ 700 865
BIZ 700 866
BIZ 700 867
BIZ 700 868
BIZ 700 869
BIZ 700 870
BIZ 700 871
BIZ 700 872
BIZ 700 873
BIZ 700 874
BIZ 700 875
BIZ 700 876
BIZ 700 877
BIZ 700 878
BIZ 700 879
BIZ 700 880
BIZ 700 881
BIZ 700 882
BIZ 700 883
BIZ 700 884
BIZ 700 885
BIZ 700 886
BIZ 700 887
BIZ 700 888
BIZ 700 889
BIZ 700 890
BIZ 700 891
BIZ 700 892
BIZ 700 893
BIZ 700 894
BIZ 700 895
BIZ 700 896
BIZ 700 897
BIZ 700 898
BIZ 700 900
BIZ 700 906
BIZ 700 907
BIZ 700 908
BIZ 700 910
BIZ 700 911
BIZ 700 912
BIZ 700 913
BIZ 700 914
BIZ 700 923
BIZ 700 924
BIZ 700 925
BIZ 700 926
BIZ 700 927
BIZ 700 930
BIZ 700 931
306
162
140
130
124
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
208
33, 208
208
208
209
209
209
209
209
209
209
209
210
209
209
209
36
243
243
243
243
239
239
239
240
243
243
243
243
243
244
244
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
700 932
700 935
700 936
700 937
700 938
700 939
700 940
700 941
700 942
700 943
700 944
700 945
700 946
700 953
700 954
700 955
700 963
700 964
700 965
700 966
700 967
700 970
700 971
700 972
700 973
700 974
700 975
700 976
700 977
700 978
700 980
700 981
700 982
700 983
700 984
700 990
700 991
700 992
700 993
700 994
700 995
700 996
700 997
700 998
710 000
710 001
710 002
710 003
710 004
710 005
710 006
710 007
710 008
710 009
710 010
710 011
244
244
245
245
245
245
244
244
244
244
244
242
242
241
241
241
242
242
242
242
242
241
240
240
237
237
237
238
238
238
42
42
42
42
42
241
241
241
241
241
241
241
242
242
27
66
66
66
66
66
66
66
66
66
66
66
BIZ 710 012
BIZ 710 013
BIZ 710 014
BIZ 710 015
BIZ 710 016
BIZ 710 018
BIZ 710 019
BIZ 710 020
BIZ 710 021
BIZ 710 022
BIZ 710 023
BIZ 710 024
BIZ 710 025
BIZ 710 026
BIZ 710 027
BIZ 710 028
BIZ 710 029
BIZ 710 030
BIZ 710 031
BIZ 710 032
BIZ 710 033
BIZ 710 034
BIZ 710 035
BIZ 710 036
BIZ 710 037
BIZ 710 038
BIZ 710 039
BIZ 710 040
BIZ 710 041
BIZ 710 042
BIZ 710 043
BIZ 710 044
BIZ 710 045
BIZ 710 046
BIZ 710 047
BIZ 710 048
BIZ 710 049
BIZ 710 050
BIZ 710 051
BIZ 710 052
BIZ 710 053
BIZ 710 054
BIZ 710 055
BIZ 710 056
BIZ 710 060
BIZ 710 061
BIZ 710 062
BIZ 710 063
BIZ 710 064
BIZ 710 065
BIZ 710 066
BIZ 710 067
BIZ 710 068
BIZ 710 070
BIZ 710 071
BIZ 710 072
71,
71,
71,
71,
71,
67
67
67
67
67
68
68
69
69
69
69
69
68
70
70
70
70
67
67
69
69
69
70
70
70
70
72
72
72
72
72
72
72
72
72
72
72
73
73
73
73
73
73
73
90
90
90
90
71
71
71
71
91
68
68
68
INDEX BY REFERENCE
XXX
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
073
074
080
081
082
083
084
090
091
092
095
096
097
098
099
109
111
112
113
114
115
116
117
118
119
120
121
124
125
126
127
128
129
130
131
133
134
135
138
139
140
141
142
145
146
147
148
150
151
152
153
154
155
156
160
161
POWER TOOLS AND
ACCESSORIES
68
68
75
75
75
75
75
78
78
78
75
80
78
78
78
79
79
79
79
77
77
77
77
77
77
76
76
80
80
76
76
76
76
81
81
78
78
78
77
77
287
287
287
76
76
76
76
82
82
82
83
83
82
82
72
72
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
710
162
163
164
165
166
170
171
172
173
174
175
176
177
178
179
181
200
201
202
203
204
205
206
207
208
209
210
212
213
214
215
216
218
219
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
245
246
247
248
SITE AND WORKSHOP
EQUIPMENT
101,
101,
105,
17,
17,
17,
18,
18,
18,
17,
17,
17,
72
72
72
72
72
86
86
86
86
86
83
81
81
81
81
282
89
89
90
90
90
90
89
89
102
102
102
288
288
288
104
104
101
103
286
286
286
286
286
19
19
19
20
19
16
16
16
16
286
285
285
285
17
17
17
17
BIZ 710 249
BIZ 710 250
BIZ 710 251
BIZ 710 252
BIZ 710 260
BIZ 710 261
BIZ 710 262
BIZ 710 263
BIZ 710 264
BIZ 710 265
BIZ 710 266
BIZ 710 267
BIZ 710 270
BIZ 710 271
BIZ 710 286
BIZ 710 287
BIZ 710 288
BIZ 710 289
BIZ 710 290
BIZ 710 291
BIZ 710 292
BIZ 710 293
BIZ 710 294
BIZ 710 295
BIZ 710 297
BIZ 710 298
BIZ 710 299
BIZ 710 300
BIZ 710 301
BIZ 710 302
BIZ 710 303
BIZ 710 304
BIZ 710 305
BIZ 710 306
BIZ 710 307
BIZ 710 308
BIZ 710 309
BIZ 710 310
BIZ 710 311
BIZ 710 312
BIZ 710 314
BIZ 710 315
BIZ 710 316
BIZ 710 317
BIZ 710 318
BIZ 710 319
BIZ 710 320
BIZ 710 321
BIZ 710 322
BIZ 710 323
BIZ 710 330
BIZ 710 332
BIZ 710 335
BIZ 710 336
BIZ 710 337
BIZ 710 338
PROTECTION, SAFETY
AND SIGNS
17
11
11
11
19, 87
19, 87
19, 87
19, 87
19, 87
19, 87
19, 87
19, 87
68
68
45
45
45
45
18
18
18
28
28
25
104
28
28
44
45
46
46
46
26
26
26
28
28
86
86
86
104
104
104
106
106
106
27, 106, 288
83
83
83
18, 286
17, 286
87
88
88
88
PLUMBING
307
INDEX BY REFERENCE
XXX
BIZ 710 339
BIZ 710 340
BIZ 710 341
BIZ 710 342
BIZ 710 343
BIZ 710 345
BIZ 710 346
BIZ 710 347
BIZ 710 355
BIZ 710 356
BIZ 710 357
BIZ 710 358
BIZ 710 360
BIZ 710 361
BIZ 710 363
BIZ 710 364
BIZ 710 365
BIZ 710 366
BIZ 710 367
BIZ 710 368
BIZ 710 369
BIZ 710 370
BIZ 710 371
BIZ 710 372
BIZ 710 373
BIZ 710 374
BIZ 710 375
BIZ 710 376
BIZ 710 377
BIZ 710 378
BIZ 710 383
BIZ 710 384
BIZ 710 385
BIZ 710 386
BIZ 710 389
BIZ 710 390
BIZ 710 391
BIZ 710 392
BIZ 710 393
BIZ 710 394
BIZ 710 395
BIZ 710 410
BIZ 710 411
BIZ 710 412
BIZ 710 413
BIZ 710 414
BIZ 710 415
BIZ 710 416
BIZ 710 417
BIZ 710 418
BIZ 710 420
BIZ 710 421
BIZ 710 422
BIZ 710 423
BIZ 710 426
BIZ 710 430
308
88
89
89
89
89
88
89
89
85
85
84
85
84
84
84
84
84
84
296
296
296
87
87
87
87
87
87
87
88
88
108
103
103
105
109
108
107
109
108
107
26
91
91
92
91
92
93
93
92
92
82
82
82
82
45
44
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
710 431
710 432
710 433
710 434
710 435
710 436
710 437
710 445
710 446
710 447
710 448
710 450
710 451
710 452
710 460
710 461
710 462
710 463
710 464
710 465
710 466
710 467
710 468
710 470
710 471
710 472
710 473
710 474
710 480
710 481
710 482
710 483
710 490
710 491
710 492
710 493
710 494
710 495
710 496
710 497
710 498
710 499
710 500
710 501
710 503
710 504
710 510
710 511
710 512
710 513
710 514
710 520
710 521
710 530
710 531
710 532
44
44
44
44
44
46
46
45
45
45
45
45
45
45
74
74
74
74
74
74
74
74
74
75
75
75
75
75
75
75
75
75
73
73
73
73
73
73
73
73
73
73
73
73
73
73
74
74
74
74
74
90
90
74
74
74
BIZ 710 533
BIZ 710 600
BIZ 710 601
BIZ 710 602
BIZ 710 603
BIZ 710 604
BIZ 710 605
BIZ 710 606
BIZ 710 607
BIZ 710 608
BIZ 710 618
BIZ 710 619
BIZ 710 620
BIZ 710 621
BIZ 710 622
BIZ 710 623
BIZ 710 624
BIZ 710 630
BIZ 710 631
BIZ 710 632
BIZ 710 633
BIZ 710 634
BIZ 710 635
BIZ 710 636
BIZ 710 637
BIZ 710 638
BIZ 710 639
BIZ 710 640
BIZ 710 641
BIZ 710 642
BIZ 710 643
BIZ 710 644
BIZ 710 645
BIZ 710 650
BIZ 710 651
BIZ 710 652
BIZ 710 653
BIZ 710 654
BIZ 710 661
BIZ 710 662
BIZ 710 663
BIZ 710 800
BIZ 710 801
BIZ 710 802
BIZ 710 803
BIZ 710 804
BIZ 710 805
BIZ 710 810
BIZ 710 811
BIZ 710 812
BIZ 710 813
BIZ 710 814
BIZ 710 815
BIZ 720 001
BIZ 720 002
BIZ 720 003
74
69
69
69
69
69
69
69
69
69
70
70
70
70
70
70
70
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
76
76
76
77
77
77
77
77
43
43
43
43
43
43
43
43
43
43
43
43
67
67
67
INDEX BY REFERENCE
XXX
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
720
004
005
006
007
008
009
010
011
012
013
014
015
016
020
021
022
023
024
030
031
050
051
052
053
055
056
057
058
071
072
073
074
075
076
081
082
160
161
162
163
164
165
166
167
200
201
306
307
308
309
310
422
433
444
455
488
POWER TOOLS AND
ACCESSORIES
67
67
67
67
67
67
67
67
67
67
67
67
67
69
69
69
69
69
67
67
73
73
73
73
73
73
73
73
68
68
68
68
68
68
75
76
72
72
72
72
72
72
72
72
89
89
23
23
23
23
23
22
22
22
22
22
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
720
720
720
720
720
720
720
720
720
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
730
651
653
808
809
810
815
816
817
821
101
110
115
121
122
123
124
127
128
129
130
201
202
203
204
210
220
230
231
232
233
300
301
302
303
310
320
325
326
327
328
329
330
331
332
333
334
335
340
341
342
343
344
345
346
347
348
SITE AND WORKSHOP
EQUIPMENT
77
77
67
67
67
67
67
67
67
275
275
275
274
274
273
273
273
273
274
274
269
270
267
268
268
267
272
272
272
276
270
271
271
270
271
271
266
266
266
266
266
266
266
266
266
266
266
265
265
265
265
265
265
265
266
266
BIZ 730 349
BIZ 730 354
BIZ 730 355
BIZ 730 356
BIZ 730 357
BIZ 730 358
BIZ 730 359
BIZ 730 360
BIZ 730 361
BIZ 730 362
BIZ 730 363
BIZ 730 364
BIZ 730 370
BIZ 730 371
BIZ 730 372
BIZ 730 373
BIZ 730 374
BIZ 730 375
BIZ 730 376
BIZ 730 377
BIZ 730 378
BIZ 730 379
BIZ 730 401
BIZ 730 410
BIZ 730 420
BIZ 730 600
BIZ 730 601
BIZ 730 700
BIZ 730 701
BIZ 730 710
BIZ 730 711
BIZ 730 720
BIZ 730 721
BIZ 730 725
BIZ 730 726
BIZ 730 730
BIZ 730 740
BIZ 730 750
BIZ 730 760
BIZ 730 770
BIZ 730 780
BIZ 730 798
BIZ 730 799
BIZ 730 800
BIZ 730 801
BIZ 730 802
BIZ 730 803
BIZ 730 809
BIZ 730 810
BIZ 730 811
BIZ 730 812
BIZ 730 813
BIZ 730 814
BIZ 730 815
BIZ 730 816
BIZ 730 831
PROTECTION, SAFETY
AND SIGNS
266
265
265
265
265
265
265
265
265
265
265
265
266
267
267
267
267
267
267
267
267
267
269
269
268
278
278
276
276
276
276
277
277
276, 297
276, 297
277
277
277
277
277
277
262
262
262
262
262
262
263
262
263
263
263
263
263
263
263
PLUMBING
309
INDEX BY REFERENCE
XXX
BIZ 730 835
BIZ 730 840
BIZ 730 841
BIZ 730 842
BIZ 730 843
BIZ 730 844
BIZ 730 845
BIZ 730 846
BIZ 730 855
BIZ 730 856
BIZ 730 857
BIZ 730 858
BIZ 730 859
BIZ 730 865
BIZ 730 866
BIZ 730 867
BIZ 730 868
BIZ 730 875
BIZ 730 876
BIZ 730 877
BIZ 730 878
BIZ 730 885
BIZ 730 886
BIZ 730 887
BIZ 730 888
BIZ 730 889
BIZ 730 895
BIZ 730 896
BIZ 730 897
BIZ 730 898
BIZ 730 901
BIZ 730 902
BIZ 730 903
BIZ 730 904
BIZ 730 905
BIZ 730 906
BIZ 730 907
BIZ 730 908
BIZ 730 909
BIZ 730 910
BIZ 730 911
BIZ 730 915
BIZ 730 916
BIZ 730 920
BIZ 730 921
BIZ 730 922
BIZ 730 923
BIZ 730 924
BIZ 730 925
BIZ 730 926
BIZ 730 927
BIZ 730 928
BIZ 730 930
BIZ 730 931
BIZ 730 932
BIZ 730 933
310
263
263
263
263
263
263
263
263
262
262
262
262
262
264
264
264
264
264
264
264
264
262
262
262
262
262
264
264
264
264
257
257
257
257
259
259
258
258
258
258
259
249
249
253
253
253
253
253
254
254
254
254
256
256
256
256
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
740 001
740 002
740 100
740 101
740 102
740 103
740 104
740 105
740 121
740 122
740 123
750 001
750 004
750 010
750 020
750 021
750 030
750 040
750 101
750 102
750 111
750 140
750 150
750 151
750 160
750 161
750 162
751 010
751 020
751 030
751 031
780 004
780 005
780 007
780 009
780 010
780 011
780 012
780 013
780 014
780 015
780 018
780 020
780 024
780 031
780 050
780 051
780 052
780 053
780 054
780 055
780 056
780 061
780 062
780 070
780 071
169
169
167
167
167
167
167
167
250
250
250
111
113
113
112
112
111
112
110
110
111
110
110
110
113
113
113
255
255
255
255
192
188
188, 189
191
174
175
175
176
188
188
189
189
192
192
198
197
197
198
198
213
213
196
196
200
200
BIZ 780 072
BIZ 780 073
BIZ 780 074
BIZ 780 075
BIZ 780 076
BIZ 780 077
BIZ 780 078
BIZ 780 079
BIZ 780 080
BIZ 780 081
BIZ 780 082
BIZ 780 083
BIZ 780 084
BIZ 780 085
BIZ 780 086
BIZ 780 087
BIZ 780 088
BIZ 780 089
BIZ 780 090
BIZ 781 001
BIZ 781 002
BIZ 781 005
BIZ 781 006
BIZ 781 010
BIZ 781 011
BIZ 781 012
BIZ 781 013
BIZ 781 014
BIZ 781 015
BIZ 781 016
BIZ 781 017
BIZ 781 018
BIZ 782 001
BIZ 782 002
BIZ 782 010
BIZ 782 011
BIZ 782 020
BIZ 782 021
BIZ 782 025
BIZ 782 026
BIZ 782 027
BIZ 782 028
BIZ 782 029
BIZ 782 030
BIZ 782 031
BIZ 782 032
BIZ 782 033
BIZ 782 034
BIZ 782 035
BIZ 782 036
BIZ 782 040
BIZ 782 041
BIZ 782 042
BIZ 782 043
BIZ 782 044
BIZ 782 045
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
192, 196, 199
216
216
190
190
190
190
190
190
190
190
190
190
190
215
215
216
216
216
216
193
193
193
193
193
217
217
217
218
218
218
218
193
193
193
193
193
193
INDEX BY REFERENCE
XXX
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
BIZ
782
782
782
782
782
782
782
782
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
790
046
047
048
049
052
060
061
062
001
002
003
004
005
006
007
008
009
010
013
014
015
016
017
018
019
020
021
022
023
024
026
027
028
029
030
031
032
033
034
035
036
037
038
040
041
042
044
047
048
055
056
090
091
094
115
122
POWER TOOLS AND
ACCESSORIES
193
194
194
194
194
195
195
195
141
168
168
162
161
161
147
135
135
126
138
139
138
138
137
138
135
134
139, 295
119
116
120
117
120
121
122
117
120
121
117
117
119
133
156
156
172
172
154
155
123, 152, 293
123, 152, 293
159
159
129
129
130
155
116
BIZ 790 126
BIZ 790 127
BIZ 790 129
BIZ 790 130
BIZ 790 131
BIZ 790 144
BIZ 790 145
BIZ 790 150
BIZ 790 151
BIZ 790 152
BIZ 790 153
BIZ 790 154
BIZ 790 155
BIZ 790 156
BIZ 790 157
BIZ 790 194
BIZ 790 200
BIZ 790 201
BIZ 790 202
BIZ 790 204
BIZ 790 213
BIZ 790 214
BIZ 790 215
BIZ 790 216
BIZ 790 217
BIZ 790 218
BIZ 790 220
BIZ 790 221
BIZ 790 222
BIZ 790 223
BIZ 790 225
BIZ 790 227
BIZ 790 228
BIZ 790 229
BIZ 790 230
BIZ 790 231
BIZ 790 232
BIZ 790 234
BIZ 790 240
BIZ 790 271
BIZ 790 272
BIZ 790 275
BIZ 790 276
BIZ 790 501
BIZ 790 502
BIZ 790 503
BIZ 790 504
BIZ 790 508
BIZ AD1400
BIZ DQ1101
BIZ FO1800
BIZ MP800
BIZ RD1800
BIZ SD1600
BIZ ST500
BIZ VP1081
BIZ VP1442
SITE AND WORKSHOP
EQUIPMENT
119
122
119
176
176
233
231
231
231
231
231
231
231
231
231
151
126
151
147
169
133
169
169
152
163
167
118
118
118
116
120
121
121
122
118
121
121
118
130
142, 295, 296
142, 295, 296
52
52
182
181
181
182
23
197
195
192
191
196
199
198
189
188
PROTECTION, SAFETY
AND SIGNS
PLUMBING
311
ALPHABETICAL INDEX
A
ABRASIVE STRIP
289
ABS TOOL CASE SETS
183-184
233-236
251-252
ACCESSORIES FOR FIBERGLASS PULL-WIRES
229-230
ACCESSORIES FOR NYLON PULL-WIRES
224
ACCESSORIES FOR POLYESTER PULL-WIRES
225
ACCESSORIES FOR STEEL-NYLON PULL-WIRES
227
ACCESSORY KIT FOR BIZ AD1400
198
ACRYLIC ADHESIVE
102
ACRYLIC SEALANT
101
ADAPTER FOR EXTERNAL WATER SUPPLY FOR BIZ FO1800
194
ADHESIVE AND SCREW-ON MOUNTING BASES
11
ADHESIVES
276
ADJUSTABLE FEET
259
ADJUSTABLE MINI-HACKSAW
159
ADJUSTABLE RATCHET WRENCH
149
ADJUSTABLE TOGGLES T ANCHORS
FOR HOLLOW PARTITIONS
ADJUSTABLE WRENCHES
AIRTIGHT CABLE WALL PLATES
82
149
30-31
42
31-32
AIRTIGHT DRY WALL FLUSH MOUNTING BOX
35
AIRTIGHT SLEEVES
29-30
30
32-33
75
ALL-PURPOSE HEAD
235
ALUMINIUM LEVEL
170
188
ANGLE GRINDER 1100 W
195
ANTI-CUT GLOVES
273
ANTISTATIC OPTICAL SURFACE CLEANER
110
9
265
AUTOMATICALLY RELOADING UTILITY KNIFE
153
AUTOMATIC CABLE CUTTERS
133
AUTOMATIC CENTRE PUNCH
163
AUTOMATIC STRIPPING GUN 0.2 TO 6 MM²
137
AUTOMATIC STRIPPING GUN PLIERS 0.2 TO 6 MM²
137
AUTOMATIC STRIPPING GUN PLIERS 0.08 TO 2.5 MM²
136
312
B
136-139
137
138
AUTOMATIC STRIPPING PLIERS 6 TO 16 MM²
138
AUTOMATIC STRIPPING PLIERS FOR FLAT
AND ROUND CABLES
139
AUTOMATIC STRIPPING PLIERS FOR SOLAR AND
PHOTOVOLTAIC CABLES 1.5 TO 6 MM²
139
B20/B30 CONNECTION KIT
B20 CLIPS
B20 FAST CONNECTION KIT
B22 LAMPHOLDER
B22 LAMPHOLDER TESTER
B30 CLIPS
B40 CLIP
BACK PANEL
BAGCLIP PLUGS
BAG OF 50 GLUE STICKS
BALL-BEARING DRAW-IN BOLTS
BANISTER BRUSH
BATTERY CHARGER FOR VP1442 DRILL/DRIVER
BELT SET OF 20 SCREW BITS
BI-METAL 8 % COBALT HOLE SAWS CLIC Ø 67 MM SET
BI-METAL 8 % COBALT HOLE SAWS STANDARD - SET
BI-METAL HSS HOLE SAW WITH 8 % COBALT
BI-METAL WASHERS
BIN BAG
BIZ’GEL EXPRESS SEALING GEL
BIZ’GEL MAX SEALING GEL
BIZ’GEL SEALING GEL
BIZ’GEL SEALING GEL, POUCH
BIZ LUB'
BIZRINGS
BIZ ROLL CABLE AND CONDUIT FEEDER
BIZSPOT EXTENSION
BIZSPOT FOR BLOW-IN INSULATION
BIZSPOT PROTECTION FOR SPOTLIGHTS
BKK METAL CLAMPS
BLACK CABLE MARKING PEN
BLACK MARKER
BLACK RUBBER TROUGH
BLADES FOR CURVED CUTTING IN ALUMINIUM
BLADES FOR STAINLESS STEEL
BLADES FOR STEEL
BLADES FOR UTILITY KNIFE BIZ 700 069
BLADES FOR UTILITY KNIFE BIZ 700 187
BLADES FOR WOOD
BLIND-STOPS + LOCKNUTS FOR CABLE GLANDS
BODY WARMER
BOLT CUTTER
BOX OF BLACK 3/1 HEAT-SHRINK SLEEVES
BOX OF COLOURED 3/1 HEAT-SHRINK SLEEVES
BRAIDED SLEEVING
BRASS COMBINATION PADLOCK
BRASS KEY PADLOCK
BRASS NUT AND SCREW KIT
BRASS PADLOCKS
91
91
92
40
40
91
93
259
18
165
158
254
188
190
210-211
211
210
208-210
210
208
33
46
254
27
26
25
26
231
286
223
36
36
36
14
169
169
251
218
218
218
153
153
217
56-57
264
157
60
60
61
279
279
46
279
ALPHABETICAL INDEX
B
BRASS PLUGS
BRICKLAYER'S KIT
BROOM HANDLES
BROOM HEADS
BROWN PLASTIC TROUGH
BUILDING KIT
BUMP CAP
BUNGEE CORDS
BUTANE GAS REFILL
C
82
252
253
253
251
252
267
256
112
C
CABLE CLAMPS
CABLE CLEATS
CABLE CLIPS
CABLE CUTTERS
CABLE ENDS
CABLE GRIPS
CABLE GUIDES
CABLE REELS
CABLE ROD KITS
CABLE SNIPS "CROCO"
CABLE SNIPS "CROCO MAX"
CABLE STRIPPER
CABLE STRIPPER KNIFE WITH HOOKED BLADE
CABLE STRIPPER KNIFE WITHOUT HOOKED BLADE
CABLE TIE BEAM CLAMPS
CABLE TIE PLIERS
CABLE TIES MOUNTING BASES
CALIBRATION KEY FOR DIAZED DII-DIII FUSES
CARBIDE BLADES FOR MULTI-DIAMETER HOLE SAW
CARBIDE PILOT DRILL FOR MULTI-MATERIAL HOLE SAWS
CARPATES SHOES S3
CARRIAGE BOLTS
CARRYING PLASTIC DRAWER UNIT
CAT TONGE SHAPED TROWEL 16 CM
CAULKING GUN
CEILING LIGHT MOUNTING BOX
CEILING LIGHT MOUNTING BOX FIX'R KIT
CEILING LIGHT MOUNTING BOX KIT FIX'R
CEILING LIGHT MOUNTING BOX R'BOX
CENTERING RINGS
CENTERING SHAFT FOR CORE DRILL BIZ FO1800
CHAIN AND MAGNET KIT
CHAINS
CHAIN SUSPENSION BEAM CLAMPS
CHEMICAL RESIN KIT
CHEMICAL RESINS
CHIPBOARD SCREWS
CHRISTA'L FLEX PUSH-IN WIRE CONNECTORS
14-16
16
12
133
47-48
55-57
231
16
237-240
232-233
155
155
136
135
135
88
126
08-11
11
152
215
212
266
71
180
251
105
38
32
38
31
193
193
235
86
87
104
104
66-67
23
CHRISTA'L PUSH-IN WIRE CONNECTORS
CHRISTA'L PUSH-IN WIRE CONNECTORS CASE
CLAMP METER
CLAW HAMMER
CLAW LINKS EARTH CONNECTORS
CLEANING BRUSHES
CLEANING HAND WIPES
CLIC ADAPTERS
CLIPEO PLUG CLAMPS
CLUB HAMMERS
COACH SCREWS
COAXIAL CABLE STRIPPER
COMBINATION HEAD SCREWDRIVER
FOR MODULAR EQUIPMENT 1000 V
COMBINATION PLIERS
COMBINATION PLIERS 1000 V
COMBINATION WRENCHES
CONCRETE HOLE SAWS
CONDUIT CLIPS
CONICAL CONNECTING PIECE FOR BIZ AD1400
CONICAL TIP WITH 1.6 MM POINT
CONNECTING SLEEVES
CONNECTING SLEEVES
FOR COPPER-PLATED STEEL EARTH RODS
CONTROL CABINET KEY
COPPER PASTE
COPPER-PLATED STEEL ROUND EARTH RODS
COPPER TERMINAL LUGS NFC 20-130
COPPER TERMINAL SLEEVES
CORDLESS DRILL/DRIVER 10.8 V/1.3 AH
CORDLESS DRILL/DRIVER 14.4 V/3 AH
CORE DRILL
COSTABELLE TOOL BAG
COSTABELLE TOOL BAG - 18 ITEMS
COTTON UNDER GLOVES
COVER FOR DRY WALL BOXES
COVER FOR FLUSH MOUNTING BOXES
COVERS
COVERS AND CUP HOOKS KIT
COVERS AND HOOKS
CRIMPING DIES
CRIMPING PLIERS
FOR COPPER TERMINAL LUGS AND SLEEVES
CRIMPING PLIERS FOR PRE-INSULATED TERMINALS
CRIMPING PLIERS
FOR RJ45, RJ11 AND RJ12 CONNECTORS
CRIMPING TOOL FOR LOW CURRENT CONNECTORS
CRIMPING TOOL FRAME
CRIMPING TOOL KIT
FOR 0.25 TO 10 MM² PRE-INSULATED CABLE ENDS
CUP HOOKS
CUT-OFF WHEELS
22
23
176
162
46
236
255
210
17
162
68
140
127
120
120
145
213-214
20
198
165
19
44
150
193
43
53-54
53
54
189
188
192
177
184
275
35
34
38
39
39
38-39
142
55, 143
52
141
25
142
143
39
216
313
ALPHABETICAL INDEX
C
D
CUTTING NIPPERS 1000 V
117
CUTTING PASTE
157
CUTTING PLIERS
117-119
CUTTING PLIERS FOR ELECTRONICS
124
CUTTING SPRAY
208
CYANOACRYLATE GLUES
103
204
CYLINDRICAL MULTI-MATERIAL DRILL BITS - UNITS
203
CYLINDRICAL SHANK HSS METAL 5 % COBALT DRILL BITS SET
205
CYLINDRICAL SHANK HSS METAL DRILL BITS SETS
205
CYLINDRICAL SHANK WOOD DRILL BITS SET
207
D
DAMAGED SCREW EXTRACTOR
DCL B22 SOCKET AND PLUG
DCL E27 SOCKET AND PLUG
DCL PLUG
DEFLECTOR NOZZLE FOR HEATSHRINK SLEEVING
DESOLDERING PUMP
DIAGONAL CUTTERS 1000 V
DIAMOND DISCS
DIAMOND DRY CORE DRILL BITS
DIES FOR ADAPTABLE CRIMPING PLIERS
DIGITAL MULTIMETER
DIGITAL VERNIER CALIPER
DIN RAILS
DIRECTIONAL HEADLIGHT WITH 4 LEDS
DISPENSER FOR 3/1 HEAT-SHRINK TUBING
WITHOUT ADHESIVE
DISPOSABLE GLOVES
DISPOSABLE PAPER BAGS
DOUBLE CABLE ENDS
DOUBLE PARTITION FLAT ANCHORS
DOUBLE RING B22 LAMPHOLDER
DOUBLE RING E27 LAMPHOLDER
DOUBLE-SIDED PE FOAM TAPE
DOUBLE THREADED SCREWS
DOWEL CLAMPS
DRAWER SEPARATOR KIT
DRILLING GUIDE
DRILL STAND FOR CORE DRILL BIZ FO1800
DRIVING HEADS FOR COPPER-PLATED STEEL EARTH RODS
DRUM ROLLERS
DRUM ROLLER STAND
DRY GAS DUST REMOVER
DRY HANDLING GLOVES
DRY WALL FLUSH MOUNTING BOX
DRY WALL FLUSH MOUTING BOXES AND ACCESSORIES
DRYWALL SCREWS
DUAL POWER SOLDERING IRON
DUCT TAPE
314
191
37
37
37
165
166
117
215-216
193
212-213
296
175
173
62
269
59
275
197
48
81
41
41
99
284-285
15
258
213
194
44
222-223
222
111
275
35
35
67
166
98
DUST FILTERS FOR BIZ AD1400
DUSTPAN
197
254
E
E27 LAMPHOLDER
E27 LAMPHOLDER TESTER
EARBAND
EAR DEFENDERS
EAR PLUGS ON STRING
EARTH CLAMPS FOR COPPER-PLATED STEEL EARTH RODS
EARTH DISTRIBUTION BLOCK
EARTHING CLAMP PLIER
EARTHING CLAMPS FOR PHOTOVOLTAIC INSTALLATIONS
EARTHING CLAMPS WITH LABEL
EARTHING CLAMPS WITHOUT LABEL
EARTHING ISOLATION BARS
EARTH TERMINALS
ELECTRICAL CORDS
ELECTRICAL INSULATION TAPES
ELECTRICIAN'S HAMMER
ELECTRICIAN'S HELMET WITH INTEGRATED SPECTACLES
ELECTRICIANS KIT OF 3 1000 V INSULATED PLIERS
ELECTRICIAN'S KNIFE
ELECTRICIAN'S LEVEL
ELECTRICIAN’S MAGNETIC POCKET LEVEL
ELECTRICIAN’S PEN-STYLE KEY
ELECTRICIAN'S POCKET LEVEL
ELECTRICIAN’S SCISSORS 22 MM² "CLASICO"
ELECTRICIAN’S SCISSORS 50 MM² "ULTIMA"
ELECTRONICS HIGH PRECISION CUTTERS
ELECTRONICS PLIERS
ELECTRONICS TOOL BOX
ELECTROPLATED METAL CLAMPS
ENDOSCOPIC CAMERA
ENGINEER'S HAMMERS
EXTENSION CORD FOR ENDOSCOPIC CAMERA
EXTENSION CORDS
EXTENSION LEADS
EXTRA WIDE FLAT WASHERS
40
40
272
272
272
44
46
296
296
45
45
45
45
150-152
244-245
96
162
268
129
155
170
171
151
171
154
154
110-112
124
124-125
125
19
176
162
107-109
176
243
241-242
72
F
FACE SPANNER
FASTEN ALL RAIL FOR IPN/IPE BEAM
FIBERGLASS PULL-WIRES
FIBER WASHERS
FIBREGLASS FOLDING RULE
FILLER
196
88
228
291-292
171
250
ALPHABETICAL INDEX
F
H
FINE HANDLING GLOVES
274
FIRE RESISTANT EXPANDING PU FOAMS
107
FIRE-RESISTANT INTUMESCENT FOAMS AND ACCESSORIES
106
FIXATION ADHESIVES
102-103
FIXED METAL DRAWER UNIT
180
FIXING CABLE WALL PLATE
42
282-285
285-286
FIXING FOR PLASTIC PIPES
286
FIXING PLUG FOR CORE DRILL STAND
194
FLAT FILE 200 MM
160
FLAT SPLICE BAR 1200 MM
92
FLEECE SWEATER
264
FLEXIBLE GUIDES WITH SHAPE MEMORY
235
FLUORESCENT WORK LIGHT
247
FLUSH-MOUNTING BOXES R'BOX
29
FOAM AND GUN CLEANER
109
FOLDABLE CONTROL CABINET KEY
151
FOLDING DRUM ROLLER
222
G
GALVANISING AND ZINC COATING
GALVANIZED STEEL CLOVERLEAF EARTH RODS
GALVANIZED STEEL CRUCIFORM EARTH RODS
GALVANIZED STEEL ROUND EARTH RODS
GAS LEAK DETECTOR
GAS SEALS
GAS SOLDERING IRON
GENERAL MAINTENANCE
GLUE FOR RIGID PVC PIPES
GLUE GUN
GOGGLES
GUN FOR INTUMESCENT FOAM 400 ML
GUNS FOR CHEMICAL FIXINGS
112
43
43
43
292
292
165
112-113
290
164
271
27
106
105
HELMETS AND CAPS
70
HEXAGONAL HEAD SET SCREWS
72
HEXAGONAL NUTS
73
HEXAGONAL SHANK MULTI-MATERIAL DRILL BITS SET - 5 ITEMS
204
HEXAGONAL SHANK MULTI-MATERIAL DRILL BITS - UNITS
203
HEXAGONAL SHANK WOOD SPADE DRILL BITS
HEXAGON KEYS
HIGH PERFORMANCE VINYL TAPE
HIGH SHACKLE BRASS KEY PADLOCK
HIGH-STRENGTH METAL CLAMPS
HIGH-STRENGTH PERFORATED METAL CLAMPS
HALF-ROUND FILE 200 MM
160
HALF-ROUND LONG ANGLED NOSE PLIERS 1000 V
121
HALF-ROUND LONG NOSE PLIERS 1000 V
120
HAMMER PLUGS
HAMMERS
HAND CABLE CUTTERS
HEAT-SHRINK TUBING
HEAT-SHRINK TUBING WITHOUT ADHESIVE
279
18
18
HOT AIR GUN 1600 W
199
HSS BLADES FOR MULTI-DIAMETER HOLE SAW
215
HSS PILOT DRILL
215
209
HSS PILOT DRILL FOR BIZ 700 896
AND BIZ 700 897 SHAFTS
209
HSS PILOT DRILL FOR MULTI-MATERIAL HOLE SAWS
212
I
ICTA CONDUIT PULLER
231
IDRA HELMET WITH INTEGRATED FULL FACE VISOR
268
IMPACT SHOES S3
266
INSPECTION LAMPS
INSULATING PROTECTIVE VARNISH
INTERAXIS ADAPTER 71 MM
246-247
111
34
INTERNAL-EXTERNAL REAMER
294
INTUMESCENT FIRE-RESISTANT FOAMS
106
IP44 16/20 A CLAW CABLE WALL PLATE
42
IP44 16/20 A SCREW-ON CABLE WALL PLATE
42
ISOBIZ POLYSTYRENE PLUGS
158
97
223
ISO AND PG STEP DRILL BIT
HACKSAW
207
149-150
HORIZONTAL UNWINDER
IPN BEAM CLAMPS
H
267-269
HEXAGONAL HEAD SELF-DRILLING METAL SHEET SCREWS
WITH COLLAR
87-88
206
80
J
JIGSAW 500 W
198
77
JIG-SAW BLADES FOR METAL
218
162
JIG-SAW BLADES FOR WOOD
217
133
JOINER'S PENCILS
168
JOINERS SQUARE
173
JOINTING COMPOUND FOR THREADED METAL JOINTS
291
58-61
58
HEAVY–DUTY CABLE CUTTER
133
JUNCTION CASING FOR ATTICS R'BOX
33
HELMET CLIPS
268
JUNCTION CASINGS R'BOX
33
315
ALPHABETICAL INDEX
K
KEY FOLDING SET
KEYLESS CHUCK FOR MP800
KIT OF 4 1000 V INSULATED SCREWDRIVERS AND 3 PLIERS
KIT OF 4 1000 V PREMIUM INSULATED PLIERS
KIT OF 4 1000 V RESISTORX® SCREWDRIVERS
KIT OF 5 1000 V INSULATED SOCKET SCREWDRIVERS
KIT OF 6 1000 V INSULATED SCREWDRIVERS
KIT OF 6 ACCESSORIES FOR CABLE RODS
KIT OF 10 HOOKS
KIWIPOINT MARKER
KNEE PADS
M
150
192
130
130
132
130
132
131
131
233
131
258
169
263
L
LABEL REMOVER
LARGE TOOL BAG
LASER DISTANCE MEASURER
LASER LEVEL
LEAKY CABLE WALL PLATES
LEATHER TOOL CASE - 20 ITEMS
LEVELS
LIFTING PROTECTIVE VISOR MOUNTED ON HEADBAND
LINEN YARN
LITHIUM-ION BATTERY FOR VP1081 DRIVER
LITHIUM-ION BATTERY FOR VP1442 DRILL/DRIVER
LOCKING SCREW UTILITY KNIFE
LOCKOUT SIGNS "DO NOT USE/MACHINE DISABLED"
LOCKOUT/TAGOUT SAFETY PADLOCK
LOCKOUT TAGS "DO NOT USE/MACHINE DISABLED"
LONG MEASURING TAPE
LONG NOSE ELECTRONICS PLIERS
LONG NOSE PLIERS
LOW CURRENT CONNECTORS
LOW EFFORT CUTTERS
LUBRICATING CLEANERS FOR ALL CONTACTS
113
177
173
171
42
185
170-171
270
290
189
188
153
277
278
277
172
124
120-122
25
119
110
M
M4/M5 ADAPTER
M6 THREADED ROD BEAM CLAMPS
M16 PILOT DRILL FOR SDS-MAX CONCRETE HOLE
SAW BIZ 700 695
MAGNETIC BIT HOLDER
MAGNETIC LEVEL
MAGNETIC LOCATION KIT
MAGNETIC MEASURING TAPE
MANUAL CROSSBOW BENDER
MARKING CHALKS
MARKING LINE KIT
316
MASKING TAPE
MASON'S COLD CHISEL
MASON'S COLD CHISEL TUBULAR SHAPE
MASON'S POINTED CHISEL
MASTER TOOL CASE
MASTER TROLLEY TOOL CASE
METAL CLAMPS
METAL FILES
METAL HOLLOW WALL ANCHORS
METALLIC PLUGS
METAL PLUG INSERTION TOOL
METAL PLUG RATCHET INSERTION TOOL
METAL SHEARS
METAL TOOL BOX
MINI DRUM ROLLER
MINI LED KIT FOR CABLE RODS
MINI TUBE CUTTER
MONOBLOCK DRUM ROLLER
MOUNTING KITS
MOUNTING TOOL FOR BKK METAL CLAMPS
MS POLYMER SEALANT ADHESIVE
MULTI-FUNCTION SHEARS
MULTI-GANGS FLUSH-MOUNTING BOXES
MULTI-MATERIAL HOLE SAWS CLIC - UNITS
MULTI-MATERIAL METAL ANCHORS
MULTI-PURPOSE CLAMP
MULTI-PURPOSE LUBRICATING OIL
MULTI-PURPOSE PLIERS 10-IN-1
MULTI-PURPOSE TIGRE® BEAM CLAMPS
MULTI-STORAGE PLASTIC TOOL BOX
MULTI-STRIPPER TOOLS
MULTI-STRIPPER TOOL WITH BLADE
MULTI-SUPPORT 3-LEDS CLIP ON LAMP
MX MULTI-MATERIAL PLUGS
99
163
163
163
181
181
99
14
159-160
78
285
125
126
156
179
223
234
294
142-143
222
287
15
102
214-215
161
30
211-212
211
78
92
112
141
87
97
178
139
139
269
77
N
231
88
214
190
170
234
172
294
168
167
NAIL ANCHORS
NAIL CABLE CLIPS AP SERIES
NAILS
NEOPRENE ADHESIVE
NO.2 SQUARE-DRIVE SELF-DRILLING METAL
SHEET SCREWS
NON-INSULATED DIAGONAL CUTTERS
NON-INSULATED HALF-ROUND LONG NOSE PLIERS
NON-INSULATED STRIPPING PLIERS
79
12
12
68
103
70
119
122
128-129
116
ALPHABETICAL INDEX
N
NYLON GUIDE
NYLON PULL-WIRES
P
123
234
224
O
OFT HAND GRIP FOR MP800
ONE-GANG FLUSH-MOUNTING BOXES R'BOX
OPEN-END WRENCHES
OPTIMUM WORKSHOP FURNITURE
OREGA SHOES S1P-SRC
OVERSPECTACLES
192
29
22
144
257-259
265
179
180
271
P
PA 6.6 CABLE TIES
PA 6.6 INSTALLATION CABLE TIES
PADSAW FOR DRYWALLS
PERFORATED BANDS
PG/ISO PUNCHES
PH2 COUNTERSUNK HEAD SELF-DRILLING METAL SHEET
SCREWS
PHOTOVOLTAIC SIGNS
PICA DRY GRAPHITE LEAD PENCIL
PILOT DRILL FOR SDS+ CONCRETE HOLE SAW
PLASTIC BIZCLIPS
PLASTIC CLAMPS
PLASTIC INSPECTION PORT
PLASTIC LAMP SOCKETS
PLASTIC TOOL BOX - 14 ITEMS
PLIERS SETS
PLUG CLIPS
PLUG PLIERS
PLUGS AND LAMP SOCKETS DEVICES DCL (FRENCH
REGULATION FOR THE CONNECTION OF LIGHT FIXTURES)
PLUGS + SCREWS + SCREWDRIVER CASE
PLUMBING PLIERS
PLUMBING TUBE CUTTERS
POINTED AND FLAT CHISELS
POLYAMIDE TERMINAL BLOCKS
POLYESTER PULL-WIRES
POLYETHYLENE FILM
PORTABLE HALOGEN LIGHTS
POUCH OF 10 OPEN-END WRENCHES
PRECISION CENTRE PUNCH
PRE-INSULATED LUGS AND CRIMPS
9
8
159
86
157
69
68
295-296
276
169
214
17
15
44
41
183
129-130
16
125-126
244
37
80
293
294
203
22
225
254
248
144
66
163
52
49-52
PREMIUM 2 IN 1 DIAGONAL CUTTERS 1000 V
118
PREMIUM 6 IN 1 MULTIFUNCTION PLIERS 1000 V
119
PREMIUM 1000 V INSULATED AUTOMATIC CABLE CUTTERS
133
PREMIUM 1000 V INSULATED COMBINATION PLIERS
120
PREMIUM 1000 V INSULATED DIAGONAL CUTTERS
118
PREMIUM 1000 V INSULATED HALF-ROUND
121
LONG ANGLED NOSE PLIERS
PREMIUM 1000 V INSULATED HALF-ROUND
121
LONG NOSE PLIERS
PREMIUM 1000 V INSULATED REINFORCED
118
DIAGONAL CUTTERS
PREMIUM 1000 V INSULATED STRIPPING PLIERS
116
PREMIUM 1000 V INSULATED WATER PUMP PLIERS
122
PRIMO TOOL CASE
181
PROFESSIONAL CABLE REELS
237-240
PROTECTION TABS FOR PLASTIC GLANDS
57
PROTECTIVE VISOR FOR SAFETY HELMET BIZ 730 204
269
PROTECTIVE VISORS
270
PTFE TAPES
290
PU FOAM GUN
108
PU FOAM LOT
109
PUNCHES
157-158
PUNCH KNIFE
161
PUSH-IN WIRE CONNECTORS FOR RIGID
24
AND FLEXIBLE WIRE
PVC CLEANING SOLVENT
289
PVC PIPE SHEARS
156
Q
QUICK DRYING DEGREASING CLEANER
QUICK-SET CEMENT
QUICK-SET PLASTER
192
110
250
250
189
188
R
RATCHET CABLE CUTTER "ROBUST", 400 MM²
RATCHET CABLE CUTTERS
RATCHET SCREWDRIVER
RATCHET SOCKET SET
RATCHET SOCKET WRENCHES SETS
RATCHET WRENCHES
RECTANGULAR PLASTIC FLOAT, 270 X 180 MM
RED DIAMOND DISCS FOR MULTI-DIAMETER HOLE SAW
REEL OF WIRE
REINFORCED DIAGONAL CUTTERS 1000 V
134
134
134
134
129
148
148
147
251
215
100
84
117
317
ALPHABETICAL INDEX
R
RESIN FOR THREADED METAL JOINTS
RESPIRATORY MASKS
RETRACTABLE UTILITY KNIFE
WITH INTERCHANGEABLE BLADE
RIBBED SLEEVES
RODS WITH ROTARY CONNECTORS
ROLLER FOR CROSSBOW BENDER
ROTARY HAMMER 800 W WITH SDS+
ROUND FILE 150 MM
RUBBER CAP UP TO Ø 200 MM
RUBBLE BAGS
S
291
271
154
147
147
62
20
236
294
191
160
195
254
S
SAFETY KIT
SAFETY SPECTACLES
SAW BLADES LENGTH 15 CM
SAW BLADES LENGTH 30 CM
SAWS
SCISSORS AND SHEARS
SCREW BITS
SCREW CABLE CLIPS
SCREWDRIVER BIT HOLDER AND 11 BITS 1000 V
SCREWDRIVERS 1000 V
SCREWDRIVERS SETS
SCRIBER
SDS+ ADAPTER SCREW FOR MP800
SDS+ CONCRETE HOLE SAWS - UNITS
SDS+ HAMMER DRILL BITS 2 CUTTING EDGES - SETS
SDS+ HAMMER DRILL BITS SET - 7 ITEMS
SDS+ HAMMER DRILL BITS "XTREME"
4 CUTTING EDGES - UNITS
SDS-MAX CONCRETE HOLE SAW
SEALANTS
SEALING INSERT FOR FLUSH-MOUNTING BOX
SEALING PLUGS
SEALS
SECURING KITS FOR FLUSH MOUNTING CEILING BOXES
SECURING KITS FOR RECESSED LIGHT FIXTURES
SELF-DRILLING MINI-PLUGS
SELF-DRILLING PLUGS
SELF-DRILLING SCREWS
SELF-GRIPPING CABLE TIES
SELF GRIPPING WRENCH
SHAFTS FOR BI-METAL HOLE SAWS STANDARD
318
276
270
159
158
158-159
160-161
154-157
190-191
13
128
127-128
130-132
164
192
213
202
200
202
200
214
202
101-102
31
30
291-292
85
85
123
68-70
79
79
79
10
123
209
SHELF SEPARATORS
SHELVES
SHOCK TOOLS
S HOOKS
SIDE CUTTING BIT
SIDE HANGING CLIP
SIGNS AND NOTICES
SILICONE SEALANTS
SIMPLE PARTITION FLAT ANCHORS
SINGLE CABLE ENDS
SINGLE COMBINATION WRENCHES
SINGLE RING B22 LAMPHOLDER
SINGLE RING E27 LAMPHOLDER
SINGLE SOCKET WRENCHES
SITE MARKING TAPE
SNAP-HOOK FOR CABLE RODS
SNICKERS KNEE PADS
SNICKERS WORK TROUSERS
SOCKET
SOCKET WRENCHES
SOFTSHELL JACKET
SOLAR SAFETY SIGNS
SOLDER ROLLS
SOLID/STRANDED WIRE CONNECTORS
SOLID WALL WATER HEATER KIT
SOLVENT FREE WORKSHOP CREAM
SOUNDPROOFING CLAMPS
SPACERS MALE/FEMALE
SPACING WASHERS
SPARE BATTERIES FOR MINI LED
SPARE BLADE FOR PVC PIPE SHEARS BIZ 790 037
SPARE BLADE FOR SHEARS BIZ 790 005
SPARE BLADE
FOR STRIPPING KNIVES 700 003 AND BIZ 700 004
SPARE BLADE
FOR STRIPPING KNIVES BIZ 790 008 AND BIZ 790 019
SPARE BLADES FOR BIZ 790 013
SPARE DIES FOR COPPER TERMINAL LUGS AND SLEEVES
SPARE JET
SPARE LEADS FOR BIZ 790 214
SPARE TIP FOR BIZ 700 461
SPECIAL CABLE MARKING PEN
SPLICE BAR 225 MM
SQUALE CONNECTION KITS
SQUALE CONNECTION KITS FOR JUNCTION
SQUALE MINI
SQUARE TERMINAL CRIMPING PLIERS
209
258
257
163-164
86
206
93
277
101
81
47
145
41
41
146
100
236
262
262
243
146
264
296-297
297
167
24
287
255
283
284
284
234
156
161
136
135
138
55
136
137
138
165
169
166
168
92
28
28
28
141
ALPHABETICAL INDEX
S
STABILISATION KIT FOR DRUM ROLLER
STAINLESS STEEL AND METAL CUTTING WHEELS
STAINLESS STEEL CABLE TIES
STAINLESS STEEL CARRIAGE BOLTS
(ROUND HEAD, SQUARE COLLAR)
STAINLESS STEEL CLAMP PLIERS
STAINLESS STEEL COACH SCREWS
STAINLESS STEEL EXTRA WIDE FLAT WASHERS
STAINLESS STEEL HEXAGONAL HEAD SCREWS
STAINLESS STEEL HEXAGONAL NUTS
STAINLESS STEEL POZIDRIV CHIPBOARD SCREWS
STAINLESS STEEL RULE
STAINLESS STEEL THREADED RODS
STAPLER
STAPLES
STEEL CABLE SNIPS
STEEL EDGE CLIPS
STEEL-NYLON PULL-WIRES
STILLSON WRENCH
STONE CUTTING WHEELS
STORAGE BOX FOR MOBILE CRIMP TOOL
STORAGE BOX WITH BUILT-IN LID
STORAGE CASE WITH 4 ORGANISERS
STORAGE TUBES FOR CABLE RODS
STORM PLUGS
STOVE BOLTS
STRAIGHT BIT
FOR DUAL POWER SOLDERING IRON BIZ 700 489
STRAIGHT TWEEZERS
STRAPS WITH RATCHET
STRAPS WITH TIGHTENING BUCKLE
STRIPPING KNIVES
STRIPPING PLIERS
STRIPPING PLIERS 1000 V
SUCTION HOSE
SUSPENSION HOOKS
SUSPENSION LOCKS WITH INTEGRATED
UNLOCKING SYSTEM
SUSPENSION SCREW-BOLT
SWEDISH KNIFE
SWEDISH S WRENCH
T
222
216
10
74
126
74
75
74
75
73
172
90
164
164
156
19
226
152
216
143
182
179
235
78
71
166
125
256
256
135-136
116
116
198
86
84
83
160
152
T
TAPS + 7 DRILLS
TAURUS SOLID AND HOLLOW MATERIAL PLUGS
TECHNICAL POLYAMIDE INSTALLATION CABLE TIES
THICK WALL 3/1 HEAT-SHRINK TUBING WITH ADHESIVE
THREADED ROD GO-THROUGH SOCKET SET
THREADED ROD KIT
THREADED RODS
THREADED RODS CONNECTORS
THREAD LOCKING
THROUGH BOLT ANCHORS
TIGHTENING NUT
TOGGLE EYE HOOKS
TOGGLE HOOKS
TOGGLES
TOOL BAGS
TOOL BELT
TOOL BOXES
TOOL CASES
TORNADO SELF-DRILLING PLUGS
TORX® CHIPBOARD SCREWS
TOUCH-UP PAINT
TRANSLUCENT SILICONE GREASE
TRANSLUCENT SILICONE LUBRICANT
TRANSPARENT SCREW CONNECTORS
TRANSPARENT TERMINAL BLOCKS
TRAPEZOIDAL BLADES FOR UTILITY KNIFE BIZ 700 040
TRIANGLE FILE 150 MM
TRIPOD FOR BIZ 625 015 FLUORESCENT WORK LIGHT
TRIPOD FOR LASERS BIZ 700 276 AND BIZ 700 394
TROWELS
TUBE FIXING MOUNTING BASES
U
ULTRA-STRONG PLASTIC TOOL BOX
76
8
TECHNO ROLL TOOL CASE
182
TELESCOPIC BROOM HANDLE
253
76
UNIVERSAL AIRTIGHT FLUSH MOUNTING BOX
34
UNIVERSAL FLUSH MOUNTING BOXES AND ACCESSORIES
UNIVERSAL FLUSH MOUNTING BOX
WITH OR WITHOUT SCREWS
UNIVERSAL KEY
34
UTILITY KNIVES
151
76
153-154
VACUUM CLEANER 1400 W
197
173
TELESCOPIC LADDER
249
TELESCOPIC STEPLADDER
249
VINYL TAPES
TELESCOPIC TUBE CUTTER
294
VOLTAGE DETECTOR
20
34
V
VERNIER CALIPER
TERMINAL BLOCKS
178
UNIVERSAL PLUGS ON STRIPS
206
140-141
60
148
258
89
90
105
81
196
83
82
83
177
177
178-180
181-182
80
66
69
113
113
111
21
21
154
159
248
174
252
17
VOLTAGE TESTERS
98
174
174-175
319
ALPHABETICAL INDEX
W
WALL BRACKETS
259
WALL CHASER 1800 W
196
WALL LIGHT MOUNTING BOX R'BOX
32
WALL LIGHT MOUNTING BOX R'BOX KIT
32
WALL-MOUNT ROLL DISPENSER
255
WALL PLUG MOUNTING BASES
11
WATER COLLECTOR
195
WATER HEATER KIT FOR INSULATED HOLLOW WALLS
287
WATER HEATER KIT FOR NON-INSULATED HOLLOW WALLS
287
WATER PUMP 8 L
195
122-123
WATER PUMP PLIERS 1000 V
122
WATER RESERVOIR
213
WET AND DRY HANDLING GLOVES
274
WIDE FLAT WASHERS
72
WIPING ROLL
255
WIRE STRIPPER
140
WOODEN FOLDING RULE
172
WORK JACKET
262
WORK LIGHTS
247-248
WORKSITE LAMP SOCKETS
40
WORKSITE PAINT SPRAYS
167
WORKSITE POWDERS
168
WORKSITE'S PEN-STYLE KEY
151
WORKSITE STORAGE BOX
182
WORK TROUSERS
263
WOVEN RUBBLE BAGS
254
X
XPRESS CONNECTORS
24
Y
YELLOW 3-BAND SAFETY VEST
Y-FIT ACCESSORIES FOR CABLE TRAYS
Y-FIT ACCESSORIES FOR LIGHT FIXTURES
263
100
84
85
BIZLINE SAS - 13, boulevard du fort de Vaux - 75017 Paris - France - 331816538 RCS Paris - Photographs and documents not binding - Within the limits of available stocks.
Registered trade marks: POZIDRIV by European Industrial Service Ltd, PHILIPS by PHILIPS SCREW CO., SDS-Plus and SDS-Max by BOSCH, TORX by TEXTRON Inc., NYLON by DUPONT,
CORDURA by INVISTA, DYNEEMA by DSM, Snickers by Snickers Workwear AB, Dickies by Williamson-Dickie Mfg.CO., Aquapanel and Fibralith by Knauf/USG Systems GmbH & Co,
Fermacel by the XELLA group, Isorel by ISOROY S.A., Spandex by Invista, YKK by Yoshida SA, VELCRO by VELCRO International BV.
Photographic credits: J-C DRUAIS, STUDIO AD’HOC, PRISMA, CMM CONSULTING, SHOREBREAK, ELECTRICIENS SANS FRONTIÈRES - Our thanks to Abdel from ABN ELEC.
320
Outdoor
connections
Swimming pool
installations
Self-amalgamating and
re-usable gel
Operating temperature:
- 40 °C to +110 °C
No shelf life
Non toxic
IP68
For injection
Usable with standard
caulking guns
Graphic charter created by 5 Mars/Cover created by 5ème Etage-Edited by Compilsoft-Printed in January 2014
Video
surveillance
system

cabling and installation accessories

Transcription

Similar documents

NEW - EXPERT

Sale 2806B April 26, 2015 Boston

Fasteners - Würth Elektronik Oy