SPARE PARTS - Line One Distributors

Transcription

SPARE
PARTS
CONTENTS.
P.2
P.3
P.4
P.5
P.6
P.7
P.8
P.9
P.10
P.11
P.12
P.13
P.14
P.15
P.16
P.17
P.18
P.19
P.20
P.21
P.22
P.23
P.24
P.25
P.26
P.27
P.28
P.29
P.30
P.31
P.32
P.33
P.34
P.35
P.36
P.37
P.38
P.39
P.40
P.41
P.42
P.43
P.44
P.45
P.46
P.47
SPARK PERFORMANCE PARTS
RXP. RXP-‐X. RXT. RXT-‐X PERFORMANCE PARTS
FXSHO. FZR. FZS PERFORMANCE PARTS
FX140. FX160 PERFORMANCE PARTS
SOLAS SCOOP GRATES & TOOLS
HYDROTURF MAT SETS
R&D RIDE PLATES & SCOOP GRATES
SOLAS IMPELLERS
SOLAS IMPELLERS
BLOWSION
BLOWSION
BILGE PUMP KITS
BATTERIES & SPARK PLUGS
ACCESSORIES
KAWASAKI TOP END REBUILD KITS
SEADOO TOP END REBUILD KITS
YAMAHA TOP END REBUILD KITS
SMALL END BEARINGS. ENGINE VALVES
VALVE SPRINGS. RETAINERS. KEEPERS
CYLINDER HEADS
CAM SHAFTS
SEADOO CRANKSHAFTS
YAMAHA CRANKSHAFTS
GASKET SETS . OIL SEALS
ENGINE MOUNTS
SEADOO OIL PUMP REPAIR KITS
YAMAHA SHORT BLOCK ENGINES
DRIVESHAFTS. INTERMEDIATE HOUSING
DRIVESHAFT & JET PUMP REBUILD KITS
WEAR RINGS. YAMAHA PUMP HOUSINGS
COUPLERS. COMPLETE SEADOO JET PUMP HOUSINGS
CARBURETTOR REBUILD KITS
FUEL PRIMER KITS. SEADOO THROTTLE BODY
AIR FILTERS
FUEL & OIL FILTERS. MOTUL OIL
STARTER MOTORS
SOLENOIDS. IGNITION COILS. RELAYS
SUPERCHARGER REBUILD KITS
SEADOO POWER VALVE REBUILD KITS
CABLES -‐ THROTTLE. STEERING. REVERSE. TILT
P.1
Sea-Doo Performance
Spark
Rear Exhaust Kit
Our rear exhaust kit delivers performance and cutting-edge style to your 2-seater Sea-Doo Spark.
Allows for removal of restrictive sound suppression system located between water box and hull
exit. Improves engine performance by reducing back pressure and restriction. Includes mandrel
bent aluminum exhaust tube that is powder coated to prevent corrosion, large billet throughhull exhaust outlet, OEM exhaust outlet block-off and high-temp silicone couplers along with all
necessary mounting hardware & installation instructions. Fits 2 seater Sea-Doo Spark models
only.
Key Features:
Improved performance & reduced back pressure.
Large aluminum rear exhaust exit looks awesome!
All components anodized and powder coated to prevent corrosion.
Fits 2 seater Sea-Doo Spark only.
RS15130 - £349.00
Free Flow Exhaust Kit
Replaces the restrictive sound suppression system located between the water box and hull exit on
your 2 or 3 passenger Sea-Doo Spark. Improves engine performance by reducing back pressure
and harmful detonation. Includes billet exhaust outlet that installs in original exit location, mandrel
bent aluminum tubing, high-temp silicone couplers and complete installation instructions.
Key Features:
Improved performance & reduced back pressure.
Mandrel bent aluminum tubing is powder coated to prevent corrosion.
Aluminum construction and high temp silicon couplers hold up to backfires & overheats.
Fits both 2 & 3 passenger Sea-Doo Spark models
RS16130 - £249.00
R&D Spark Power Filter
The R&D Spark Power Filter Kit will add a noticeable increase in throttle response and overall
power by opening up and allowing more air flow over the super restrictive O.E.M. air plenum box.
The O.E.M. filters are known to be over restrictive causing sluggish low-end power. The R&D Filter
Kit incorporates and adds needed intake track length proven to increase overall torque and power
on 4 stroke engines. The R&D Filter is easy to install in 30 minutes, adds peak rpm’s and power
with a great sound tone. The R&D Air Filter element is lifetime serviceable over the restrictive non
serviceable stock filter.
203 00900 - £199.00
Spark Waterbox
Unique exhaust baffle design increases the low-end power and mid-range pull of your SPARK’s
900cc engine. Delivers up to 5hp on modified engines along with significant torque gains. Highstrength aluminum construction will survive backfires and meltdowns. Developed on our Dyno and
tested extensively on the water, this water box features radiused exhaust tubes and dished end
caps for optimum exhaust flow. Recommended for use with RIVA Free Flow Exhaust Kits or RIVA
Rear Exhaust Kits. Includes detailed installation instructions.
Key Features:
Delivers up to 5hp on modified craft.
Direct replacement for restrictive OEM water box.
Beaded inlet & outlet flanges for reliable coupler retention.
Radiused exhaust tubes & dished end caps.
Powder coated to prevent corrosion.
RS16131 -£399.00
Line One Distributors Ltd: 01285 655123
2
Sea-Doo Performance
Spark
Spark Sponson Kit
Our race proven Pro-Series Sponsons will dramatically improve the handling of your craft with
their superior blade & backing plate design. Includes a bulletproof mounting system that features
a solid backing plate and four anchor points with billet inserts in sponson fins. Sponson depth is
adjustable to control the amount of influence they have on the craft. Easy installation uses original
mounting studs. Includes necessary hardware and installation instructions.
Fits 2-up & 3-up models.
RS26130 - £299.00
R&D Spark Intake Grate
The R&D Spark Aquavein Intake Grate will noticeably increase overall handling performance,
significantly reduce cavitation, increase acceleration, and add 1+ mph to top end performance in
flat water conditions! A 2-3 mph speed improvement (over stock) will be gained in rough water
conditions. The Spark Aquavein will deliver a noticeable increase in rear end traction, and top
speed stability. Low and high speed cornering stability is also significantly increased. The R&D
Aquavein is a must have performance part addition.
113-96001 - £249.00
R&D Spark Pump Seal Kit
The R&D Spark Pump Shoe Seal Kit will seal up the pump inlet to noticeably reduce cavitation.
Positive Pump hook-up, and top speed performance are increased with a perfectly sealed pump
system
163-81901 - £69.00
Trim Tabs
Our precision machined Trim Tab Kit keeps your Spark from bouncing in choppy conditions.
Delivers improved pump hook-up and reduced porpoising by extending the hull’s planing surface.
Top speed is increased in rough water and unaffected in smooth conditions. Constructed of
billet aluminum and anodized to prevent corrosion. Includes aluminum backing plates for secure
mounting. Allows use of factory boarding step.
RS27130_FPT -£POA
R&D Spark Ride Plate
Improve the handling and performance of the Spark with the new R&D Pro Series Ride Plate. R&D
has redesigned the centre section and added overall length to the ride plate. The R&D Ride Plate
transforms the vertical bow jump into forward momentum by keeping the pump hooked up and
driving forward without speed loss.
RDS29 £229.00
Steering System
Introducing the ultimate race proven steering system for your Sea-Doo SPARK. Steering shaft is
constructed of aircraft grade aluminum tubing for maximum strength & rigidity. Directly replaces
plastic system with a stronger unit that provides variable tilt positions. Delivers a precision feel
and the confidence to push your craft to the limit with improved dependability and comfort.
Bulletproof bar clamp will accept any 7/8” handlebar or 1-1/8” bulge bar. Includes all necessary
installation hardware and instructions.
RS20110 - £890.00
Biillet Throttle & Brake Levers
Our billet lever set for Sea-Doo iControl models provides superior control and comfort along with
cutting edge styling. Directly replaces the OEM plastic parts with high quality C-N-C machined
throttle and brake levers. Features more responsive stainless steel return spring for a precision
feel. Gunmetal gray anodized coating prevents corrosion. Installs easily with included instructions.
RS24090_Iicl - £129.00
3
Sea-Doo Performance
Spark
Engine Access Kit
This kit provides excellent access to your Spark’s engine compartment without removing the deck.
Allows for routine maintenance such as oil & spark plug changes, rinsing off salt water, post ride
ventilation, etc. Kit installs under seat with no visible modifications when seat is in place. Includes
access panel with integrated fire extinguisher storage along with aluminum support bracket, all
necessary mounting hardware and detailed installation instructions.
Key Features:
Provides easy access to engine compartment.
Integrated fire extinguisher storage.
No visible modifications with seat in place.
Applications: All Spark 2-Up & 3-Up models.
RS4-130-EAK - £149.00
Stainless Steel Washer Kits
Sturdy stainless steel washer kits directly replace the original weak plastic washers that are prone
to crack and shear under use. Provides an awesome cosmetic upgrade along with increased
durability. Precision machined washers are electro polished providing excellent fit and finish. A
must for repeatedly removing & replacing your deck for regular maintenance & inspection. Kits
include one extra washer along with installation instructions.
Installation of both kits will provide a uniform look and maximum durability.
RS4-130-WUK-1 Engine Access Deck Kit: Includes 21 precision machined stainless
washers for main (centre) engine access deck. £49.00
RS4-130-WUK-2 Front & Rear Deck Kit: Includes 31 precision machined stainless
washers for front and rear decks. £59.00
Billet Aluminum Backing Plate Kit
Our billet aluminum backing plate kit provides a bulletproof mounting system for your Spark’s
intake grate. Precision machined from T6 aluminum, this kit enables you to install and remove
your intake grate without deck removal. Also upgrades factory bilge pump and drain plug systems
by lowering water inlet points for drier operation. This kit is an essential safety feature for modified
craft due to the added stress on intake grate mounting points.
Key Features:
Allows intake grate to be removed & replaced without deck removal.
Bulletproof mounting system reinforces the plastic hull for added strength.
Improves efficiency of syphon bilge pump system.
Improves effectiveness of hull drain plug.
Applications: All Spark 2-Up & 3-Up models
RS21130-BPK-R - £129.00I
Solus Spark Impeller
12-17 degree pitch, designed to give overall gains on bottom, mid & top end performance, only fit
a Solas Impeller if you also fit a Aquavein & Pump Seal Kit at the same time.
SOS023 - £249.00
4
Sea-Doo Performance
RXP. RXP-X. RXT. RXT-X. GTX-S/C
Power Filter Kit
Delivers greatly improved acceleration and a 1~2 mph (150~200 rpm) top speed increase by
replacing the restrictive stock intake system. The Power Filter® feeds the supercharger with
a steady diet of cool air via a large 3” diameter intake duct and oversized K&N filter element.
Ducting is precision formed from a race proven composite that will not conduct heat to incoming
air. Installs securely via a silicone coupler and sturdy bracket. Includes pre-filter element. NOTE: It
will be necessary to upgrade your stock pump impeller to a steeper pitch when using the Power Filter
Kit.
RS13050-06 – Fits: RXP. RXT. GTX S/C. RXP-X. RXT-X. - £249.00
RS13100-S - POWER FILTER KIT: RXT / GTX iS / aS - £259.00
Power Filter Kit RXT260
The RXT-X 260 Power Filter Kit draws cold air from outside your engine compartment delivering
awesome performance and eliminating power-robbing heat intake. Forward air intake is separated
from hot engine compartment with rigid thermal bulkhead that installs between engine &
fuel tank. Cold air is delivered to engine via large 4” smooth-bore ducting that is attached to
supercharger with unique velocity stack and sturdy billet clamps. Requires use of RIVA Catch Can/
Oil Breather System (part# RS19050-BCC - see page 3).
RS13100- Fits 2010-2015 RXT-X 260 only - £439.00
RS13110 - POWER FILTER KIT: 260 RXP-X - £439.00
Free Flow Exhaust Kits
the watercraft. Improves engine performance by reducing back-pressure and harmful detonation.
Includes mandrel bent aluminium tubing that is powder coated to prevent corrosion, high-temp
silicone replacement coupler, stainless steel hose clamp and installation instructions.
RS16080 Fits RXP-X. RXT-X & 255hp non-iControl - £99.00
RS16090 - Fits all Sea-Doo models with S3 hulls including iS & aS units. - £219.95
Rear Exhaust Kit
Kit allows removal of restrictive sound suppression system located between waterbox and hull
exit. Improves engine performance by reducing back-pressure and restriction. Strategically
placed fitting injects water just before exhaust exit to suppress sound level. Includes custom
molded exhaust tube, billet through-hull exhaust outlet and OE exhaust outlet block-off along
with all necessary mounting hardware & installation instructions. NOTE: Removal of O.P.A.S. and
installation of RIVA Performance O.P.A.S Block-off Kit is necessary to accommodate installation of
RIVA Rear Exhaust Kit for all models.
RS15050-1 – Fits: RXP. RXT. GTX S/C. RXP-X. RXT-X 255hp non-iControl & 215hp £269.00 - When fitting to an RXP-X or RXT-X you must also fit
RS17080-ICUK - Intercooler Up-Grade Kit - £489.00
RS15100-2 Rear Exhaust Kit - Fits 2010-2011 RXT-X 260 only - £269.00
(does not fit iS & aS models).
RS15110 - RXP-X 260 - £289.00
Engine Breather, Oil Catch Can
Easy to install catch can/oil breather eliminates power-robbing crankcase fumes and oil vapour
from your engine’s air intake. Increases horsepower by removing the engine’s requirement to burn
relatively non-combustible oil. Also improves intercooler efficiency by preventing the oil sludge
coating that lowers thermal efficiency. Excess oil vapour is routed to our translucent catch can
where it condenses and collects for occasional draining via integrated petcock valve. Kit includes
K&N breather and Sea-Doo mounting bracket along with all necessary hardware & installation
instructions.
RS19050-BCC – Fits All SD 4 Stroke (Except S3 Suspended Deck) - £129.00
5
Sea-Doo Performance
Heavy Duty Washer Kits
These are direct replacements for the original clutch washers that are prone to fail on the SeaDoo’s. Precision machined from tool grade steel to increase durability. Will not break up and
damage engine at end of service life.
RS1751-HDW-945 (‘04+’05 models) £119.95
RS1751-HDW-946 (’06+’07 models) £119.95
RS1751-HDW-948 - (08 & NEWER 260/255/215hp) - £119.95
Top Loader Scoop Grates
The top-loader intake grates feature a unique tapered wing design that eliminates prop spin and
cavitation while delivering enhanced acceleration and top-speed. Deep side rails improve stability
and handling. Race Legal. Instantly adds 3mph to the X models.
RS22050 – Fits: RXP 215hp- £149.00
RS22055 – Fits: RXT. GTX S/C - £149.00
RS22080 – Fits: RXP-X. RXT-X 255hp non-iControl - £149.00
Solas Impeller
Solas Concord Impellers increase low-end thrust and top-end speed. Constructed of high strength
stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for
reduced cavitation. All “R” model Solas impellers are designed to be fitted in conjunction with a
Stage 1 Kit.
For application guide please refer to the Solas section on page 16
Stainless Steel Impeller Liner
Original Sea-Doo impeller liners are made from a plastic/composite material which is prone to
damage when a stone enters the pump housing, the stainless steel liners are much more durable
than the OEM liner and are longer wearing.
SOWR – Fits: RXP. RXT. RXP-X. RXT-X - £129.95
SOWR.1 - Fits: GTX 4Tec/155 & 185 hp - £129.95
VTS Extension Rod
The precision-machined VTS Extension Rod allows maximum “nozzle down” adjustment after
installation the RIVA Pump Wedge. Necessary on modified craft to keep bow down during initial
acceleration while still providing maximum top speed advantage when trimmed up. Adjustable
design comes preset for RIVA 2° Pump Wedge. For 255/215hp non-iControl models only
RS23050-1-ER - Fits: RXP. RXT. GTX S/C. RXP-X. RXT-X - £95.00
for details of the RIVA race bred Stage Kits
visit: www.lineonedist.co.uk
6
Sea-Doo Performance
Pump Wedge
Pump Wedges substantially improve the top-speed of your craft 1~2mph. The precisionmachined 2-degree wedge trims up your pump nozzle raising the bow of your craft for less
drag. RIVA Pump Wedge features a unique double-sided lip to retain silicone sealant and prevent
cavitation. Constructed of aircraft grade anodised aluminium.
NOTE: We do not recommend installing our Pump Wedge without installing an aftermarket intake
grate such as our Top-Loader Intake Grates (RXP part# RS22050 / RXT. GTX part# RS22055).
Our Performance Development Team has found that installing the Pump Wedge without an
aftermarket intake grate causes the craft to handle unpredictably.For 255/215hp non-iControl
models only
RS23050 – Fits: RXP. RXT. GTX S/C. RXP-X. RXT-X - £129.00
Pro-Series Sponson Kit
Our race proven Pro-Series Sponsons will dramatically improve the handling of your craft with
their superior blade & backing plate design. Includes a bulletproof mounting system that features
a solid backing plate and five anchor points with billet inserts in sponson fins. Sponson depth is
adjustable to control the amount of influence they have on the craft. Easy installation uses original
mounting studs. Includes necessary hardware and installation instructions. For 255/215hp noniControl models only
RS26050 – Fits: RXP. RXT. GTX S/C. RXP-X. RXT-X - £339.00
RIVA’s race proven sponsons deliver a significant handling improvement through increased adjustability, strength and design. Adjustable billet aluminum stabilizer wing allows you to tune lean-in
handling characteristics. Bulletproof aluminum mounting inserts add strength and increase vertical adjustability. Sponson fins are precision machined from high strength material that will not flex
under extreme conditions.
RS26110 - RXP-X / RXT-X 2012 260hp - £399.00
O.P.A.S Performance Block-Off
Designed to cleanly and easily cover the openings left when O.P.A.S. is removed preventing water
from entering the hull. Made from billet aluminum utilizing O-ring seals. Anodized to prevent
corrosion. Installs easily with stock hardware.
RS29050-1 - Fits: RXP. RXT. GTX S/C. RXP-X. RXT-X - £129.00
7
Yamaha Performance
FX-SHO. FZR. FZS. FX-SVHO
Rear Exhaust Kit
The rear exhaust kit for the FZR-FZS delivers performance and cutting-edge style. Allows for
removal of restrictive sound suppression system located between water box and hull exit.
Improves engine performance by reducing back pressure and restriction. Includes mandrel bent
aluminum exhaust tube that is powder coated to prevent corrosion, large billet through-hull
exhaust outlet, billet OEM exhaust outlet block-off and high-temp silicone couplers along with all
necessary mounting hardware & installation instructions.
RY15050 - £329.00 - Fits: FZR/FZS
RY15070 - £329.00 - Fits: 2012 & newer FX-SHO & FX-HO (NA) models only
FZR. FZS. FX-SHO Water Box
Developed on the RIVA Dyno and tested extensively on the water, this water box features radiused
exhaust tubes and end caps for optimum exhaust flow. Unique exhaust baffle will increase the
low-end power and mid-range pull of your Yamaha watercraft. Delivers up to 15hp on modified
engines along with significant torque gains. High-strength aluminum construction will survive
backfires and meltdowns. Powder coated to prevent corrosion. A must for modified motors.
Delivers up to 15hp on modified craft! Machined hose flanges for reliable coupler retention.
Radiused exhaust tubes & end caps. Powdercoated to prevent corrosion.
RY16041 - £379.00
Performance Power Filter
The Power Filter feeds your SHO a steady diet of cool air delivering greatly improved acceleration
and rpm. Replaces restrictive stock air box with a high-volume, precision-formed intake duct that
attaches to the supercharger via a large 4” adapter. Cool air enters the system via an oversized
K&N filter element. Includes water-repellent pre-filter and detailed installation instructions.
RY13040 - £279.00 - Also Fits SHO/FZR/FZS/SVHO
RY13070 - £279.00 - Fits SHO ‘12+ /FX SVHO
your watercraft. Improves engine performance by reducing back pressure and harmful detonation.
Includes mandrel bent aluminium tubing that is powder coated to prevent corrosion, high-temp
silicone replacement coupler and installation instructions.
RY16040 - £189.00 - Also Fits SHO/FZR/FZS/SVHO
RY16070 – FX SVHO - £189.00
Intake Manifold Up-Grade Kit
The Intake Manifold Upgrade Kit enables your SHO engine to produce more horsepower by delivering increased air flow and boost pressure (+1lb). Precision tapered billet sleeve directly replaces
restrictive mesh element in intake manifold. Provides improved low-end punch and mid range
pull through quick & easy installation. Includes detailed installation instructions. NOTE: Our testing
has determined the stock ECU will compensate for the increased boost provided by our Intake
Manifold Upgrade Kit.
RY12040-IMUK - £39.00
Fits all FX-SHO & FZ Models & 2013 FX-HO & VX Models SVHO/FX SVHO
Power Plenum Flame Arrester
The R&D High Flow Filter design replaces the restrictive stock filter inside the OEM air box. This
is the only performance filter that utilizes the water resistant OEM air box, allowing improved air
flow. Why? Because replacing the OEM paper filter element with the R&D high flow filter allows
more air flow which equals more power and improved performance. The washable and reusable
design means this will be the last filter you will ever have to buy.
200-01800 - £99.95 - Fits: SHO/FZR/FZS
8
Yamaha Performance
Surge Protector Kit
The R&D Yamaha Surge Protector Kit will significantly improve supercharger clutch and compressor wheel performance and reliability by eliminating damaging compressor surge. This turbulence
is the primary cause of undue stress on the supercharger compressor wheel, intercooler, clutch
system, and its components. As soon as the throttle valve is opened, the blow off valve immediately closes and the compressor can supply its full boost potentials to the engine. Note: Can only
be fitted with Multiport (612-92005)
612-18008 - £299.00 - Fits SHO/FZR/FZS
Multi-Pressure Port Boost Gauge/Surge/RRFPR Adaptor Kit
The R&D Yamaha Multi-Pressure Port Adaptor Kit will allow quick and easy hook up of digital
or manual boost gauges with the R&D Multi-port billet adaptor. The R&D Pressure Port Adaptor
installs between the MAP sensor and the MAP sensor bracket as a “bolt on” part with no
modifications. The R&D Pressure Port Adaptor Kit comes complete with longer MAP sensor
mounting screws, o-ring seals, nylon cable ties, all mounting hardware and instructions.
612-92005 - £49.95 - Fits SHO/FZR/FZS
612-92006 - £17.95 - Fits SHO ‘12+
Engine Breather Up-Grade Kit
Easy to install Engine Breather Upgrade Kit eliminates power-robbing crankcase emissions
from your engine’s air intake. Increases horsepower by removing the engine’s requirement to
burn relatively non-combustible oil. Also improves intercooler efficiency by preventing the oil
sludge coating that lowers thermal efficiency. Easy installation retains highly efficient OEM air/oil
separator system. Kit includes pre-formed hose with attached K&N filter along with all necessary
hardware & instructions.
RY19040-EBUK-1 – £49.95 - Fits SHO/FZR/FZS
RY19040-12-EBUK - £49.95 - Fits `12 & Newer 1.8L
Top Loader Scoop Grate
Top-Loader intake grate improves hook up and handling in rough conditions. Centre wing eliminates prop spin and cavitation found with the stock grate along with the SHO’s tendency to drop
on its nose when the throttle is let off at high speeds. Powder coated to prevent corrosion.
RY22040 - £249.00 – Fits SHO & FX ‘08-11
RY22070 - £329.00 – Fits `12 & Newer FX Models
9
Yamaha Performance
Pump Seal Kit
Dramatically reduce cavitation and prop spin with our easy to install Pro Pump Seal Kits. Location
specific, molded inserts fill the voids in OEM pump inlet shoe that bleed air into pump causing
cavitation. Recommended for modified craft using aftermarket intake grates. Includes detailed
installation instructions.
RDY34.4 - SHO - When using RIVA Scoop Grate - £75.00
RDY34.5 - SHO - When using R&D Scoop Grate - £75.00
RDY34.7 - FZR/FZS When using RIVA Scoop Grate - £75.00
RDY34.8 - FZR/FZS When using R&D Scoop Grate - £75.00
RDY34.9 FX SVHO when using RIVA Scoop Grate - £75.00
RDY34.1 FX SVHO when using R&D Scoop Grate - £75.00
Solas Impeller
Solas Concord and Super Camber Impellers will increase low-end thrust and top-end speed.
Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive
hub-end water seal for reduced cavitation.
SOY003.2 – YS-CD-13/22 - £249.00 Fits: FX-SHO. FZR/FZS
YS-DF-13/22R – RIVA Race Impeller - £339 - Fits: FX-SHO. FZR/FZS
SOY023 YV-CD-13/20 Fits FX SVHO
Performance Ride Plate
The Performance Ride Plate for the new SHO improves top speed and reduces porpoising. Unique
design provides quicker planing and improved handling. Compatible with OEM speedo sender.
RY21040 - £249.00 - Fits SHO
RY21050 - £249.00 – Fits FZR/FZS and 08 to 11 FX models
Unique blade design provides a significant improvement to the handling characteristics. Reduces
rough water hunting and rolling sometimes experienced with stock sponsons. Sponson depth is
adjustable to control the amount of influence they have on craft. Easily installs to stock mounting
points with RIVA’s bulletproof mounting system that features billet inserts in sponson fins.
RY2625 - £249.00 – Fits FX-SHO/FZR/FZS/VX All
10
Yamaha Performance
FX140. FX160 HO Cruiser
Power Filter Flame Arrester
The FX Power Filter® is a direct replacement for the restrictive stock air filter in the OEM air box.
Delivers increased airflow to engine providing improved throttle response, acceleration and top
speed. Screen-type element will not soak up excess engine oil, as does the OEM paper element
that increasingly restricts performance. Power Filter is designed to work in conjunction with
Velocity Stacks so as to optimise performance.
RY1325 - £99.00 - Fits `08~02 FX-140 Models (MR-1 Engine)
Velocity Stack Kit
Designed to increase horsepower and torque throughout the RPM range on your FX140 or FXHO
The easily installed Velocity Stack Kit replaces the restrictive factory flame arrestors providing
improved throttle response and top-speed. Kit includes four Velocity Stacks machined from billet
aluminium that utilize O-ring seals and set screws to lock onto throttle body and are anodised to
prevent corrosion. Sold in sets of four.
RY1325-VSK - £129.00
Replaces the restrictive sound suppression system located between the waterbox and hull exit on
your watercraft. Improves engine performance by reducing back pressure and harmful detonation.
Easy installation with noticeable results.
RY1625 - £129.00 - Fits `02~08 FX-140 Models (MR-1 Engine)
Top Loader Scoop Grate
Our Top-Loader intake grate improves hook up and handling in rough conditions. Centre wing
eliminates prop spin and cavitation found with the stock grate along with the FX’s tendency to
drop on its nose when the throttle is let off at high speeds. Powder coated to prevent corrosion.
RY22040 – Fits ‘08 FX - £199.00 RY22325 – Fits FX 02-07 models - £169.00
Pump Seal Kit
Dramatically reduce cavitation and prop spin with our easy to install Pro Pump Seal Kits. Location
specific, molded inserts fill the voids in OEM pump inlet shoe that bleed air into pump causing
cavitation. Recommended for modified craft using aftermarket intake grates. Includes detailed
installation instructions.
RY2525 – Fits All FX £79.00
Performance Ride Plate
Improves Top Speed and Handling, Provides Quicker Planing, Great for Riding Multiple Passengers, Compatible with OEM Speedo Sender.
RY21025 – Fits FX models: ’02-’04 - £199.00 RY21026 – Fits FX ’05 -’08 - £199.00
Solas Impeller
Solas Concord and Super Camber Impellers will increase low-end thrust and top-end speed.
Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive
hub-end water seal for reduced cavitation.
SOY002 – YG-DF-14/20 – Fits: FX-HO. FX-HO Cruiser £249.00 - Fits `02~08 FX Models
SOY004 – YF-CD-12/18 – Fits: FX140. FX Cruiser £249.00 - Fits `02~08 FX Models
Unique blade design provides a significant improvement to the handling characteristics. Reduces
rough water hunting and rolling sometimes experienced with stock sponsons. Sponson depth is
adjustable to control the amount of influence they have on craft. Easily installs to stock mounting
points with RIVA’s bulletproof mounting system that features billet inserts in sponson fins.. Fits all
Yamaha SHO, FX & VX models.
RY2625 - £249.00
11
Solas Scoop Grates
& Specialist Tools
Solas Yamaha Top Loading Scoop Grates
Part No
Description
Retail £
SOG005
SUPERJET UP TO 2007, WAVEBLASTER
99.00
SOG009
FX HIGH OUTPUT, FX CRUISER HIGH OUTPUT UP TO ‘07
99.00
Solas Kawasaki Top Loading Scoop Grates
SOG006
ULTRA 150
69.00
SOG008
750SX, 750SXI, 750XIR
69.00
Solas Sea-Doo Top Loading Scoop Grates
SOG010
RXP 215HP
99.00
SOG011
RXT, GTX 4 TEC
99.00
SOG003
RXX, XP/XP DI, XP LTD, GTI LE, GTI RFI
79.00
SOG001
GTX LTD, GTX DI, LRV DI, GSX LTD
79.00
SOG002
GSX RFI, GTX RFI, GTX PRO, GSX, GS
79.00
SOG004
EARLY 650 &720 MODELS
79.00
Solas Impeller Removal Tools
SO0005
ALL KAWASAKI
14.95
SO0005
SEA-DOO (NOT SR, SRX)
14.95
SO0008
SEA-DOO SR SERIES
14.95
SO0009
SEA-DOO SRX & SRZ SERIES
14.95
SO0006
YAMAHA YB SERIES
14.95
SO0007
YF, YG SERIES
14.95
SO0005
YH SERIES
14.95
SO0004
YV & YS SERIES
14.95
Solas Yamaha Drive Shaft Holding Tools
SO0010
YB SERIES
19.95
SO0011
YF, YD (CONCORD), YG SERIES
19.95
SO0012
YV & YS SERIES
19.95
SeaDoo
Kawasaki
12
Yamaha
Hydro-Turf Mat Kits &
Seat Covers
Yamaha Mat Kits
HTY13*
VX110 (05-09)
79.95
HTY12 - HTY12.1*
FX140 / FX Cruiser - SHO. FZR.FZS
79.95
HTY11*
GP1300R / GP1200R / GP800R
79.95
HTY10*
GP760 / GP800 / GP1200 (97-99)
79.95
HTY09*
XL1200LTD (99-01) / XL800 / XLT1200 / XLT800
79.95
HTY08*
Venture XL1200 (98) / XL700 & 760 (98-04)
79.95
HTY03
Superjet Freestyle Kit
99.95
HTY03.1
Superjet Freestyle with Kicker Cut-Outs
HTY02
Superjet (96+)
79.95
HTY01
Superjet (90-95)
79.95
HTY15*
VX110 (‘10+) VXR, VXS
79.95
129.95
Sea-Doo Mat Kits
Part No
Description
Retail £
HTS10*
RXP RXP-X
79.95
HTS09*
GTX (03-06) / GTX 4-TEC (02-05) / GTX DI (02-03) / RXT & X
79.95
HTS12 *
RXP-X 260 ‘12+
79.00
HTS13 *
Spark
79.00
Universal Splash Guard
Kawasaki Mat Kits
Part No
Description
Retail £
HTK15*
250X 260X & 300X
79.95
HTK14
Ultra150
69.95
HTK07
800SX-R
69.95
*Mat Set comes complete with 3M backing so no need to buy a pot of glue
Hydro-Turf Accessories
Design Your Own Seat Cover
1. Tell us which seat cover you want to design.
2. We e mail you a line drawing and colour swatch.
3. You send it back with your colour choice.
4. Three weeks and you get a brand new swanky custom-made
seat cover.
See Numbered Drawing
HTA01
Black Diamond Moulded Sheet 40” x 62”
59.95
HTA11
Side Rail Kit - fits 750SX, 800SXR, Supejet
39.95
HTA03
Universal Sit Down Splash Guard
49.95
HTA08
Superjet Hood Seal
16.95
BS44
Mat Glue Adhesive
9.95
HTA01.3M
Black Diamond Moulded Sheet with 3M backing size 40” x 62”
89.95
13
03/01/2008 15:15
R&D Ride Plates &
Aquavein Scoop Grates
Kawasaki Aquavein Scoop Grates
Part No
Description
Retail £
RDK10.1
250X & 260X
199.00
RDK07
800SXR
169.00
RDK09
300X
199.00
Yamaha Aquavein Scoop Grates
RDY10
VX110
169.00
RDY09
FX140/HO
149.00
RDY08
GPR
149.00
RDY07
XL & All XLT
159.00
RDY01
Superjet ‘96-’07
159.00
RDY01.1
Superjet ‘08 +
169.00
RDY37
SHO. ‘08 11HO.
199.00
RDY39
FZR / FZS
199.00
RDY38
SHO ‘12+
199.00
Sea-Doo Aquavein Scoop Grates
RDS08
RXT
129.00
RDS10
RXP
129.00
RDS25
RXP-X/RXT-X
149.00
RDS25.1
RXP-X / RXT-X – Double Deep Race Grate
169.00
RDS26
260 HP iS Models
169.00
RDS27
RXP-X 2012+
169.00
RDS28
Spark
239.00
RDY17
GPR
159.00
RDY13
Superjet F/style
159.00
RDY14
Superjet Racing
159.00
RDY14.1
’08 + Superjet Freeride
179.00
RDY36
FX-SHO
229.00
RDY42
FZR / FZS Adjustable Ride Plate
229.00
RDY43
VXR. VXS
229.00
Yamaha Ride Plates
Kawasaki Ride Plates
RDK33
250X & 260X
229.95
RDK14
800SXR
169.00
RDK35
300X
229.00
14
Solas Impellers
Kawasaki Impellers
Part No
Code-Pitch
Description
Retail £
SOK019
KR-CD-15/2
310X
249.00
SOK018
KR-CD-14/21
300X
249.00
SOK021
KX-CD-16/21
250X/260X
249.00
SOK002
KG-DF-13/25
STX-R (STOCK)
249.00
SOK003
KG-CD-13/19
1100STX-DI, 1100STX, 1100ZXI, STX-12F
249.00
SOK004
KG-CD-14/21
STX-15F
249.00
SOK005
KG-CD-12/18
900STX ‘03
249.00
SOK006
KH-DF-16/20
ULTRA 150
249.00
SOK007
KF-SC-16/23
900STX ’97-02, 900STS, 900ZXI
249.00
SOK008
KP-DF-13/22
800SXR (STOCK)
249.00
SOK009
KP-DF-14/23
800SXR (MODIFIED)
249.00
SOK010
KE-CD-11/16
750: ALL MODELS
239.00
SOK014
KA-SC-14/19
650: ALL MODELS
239.00
SOK015
KD-SC-14/19
550SX ‘90+
189.00
SOK016
KB-SC-14/19
JS550 UP TO ‘89
189.00
SOK017
KC-SC-14/19
JS300, JS440
189.00
SOY003.2
YS-CD-13/22
FX-SHO/FZR/FZS 2008 - 2013
249.00
SOY003.3
YS-CD-13/19
FX HO / FX Cruiser HO, VXR, VXS NA Engines
249.00
SOY001
YH-CD-18/22
VX110, SPORT, DELUXE, CRUISER ’05 +
249.00
SOY002
YG-DF-14/20
FX-HO, FX-HO CRUISER, GP1300R ’05 +
249.00
SOY004
YF-CD-12/18
FX-140, XLT1200, SUV, FX CRUISER
249.00
SOY005
YF-CD-13/19
GP1300R UP TO ’04, GP1200R ’02 +
249.00
SOY007
YF-CD-11/14
GP800R, XLT800, XL800 ‘04
249.00
SOY009
YD-CD-12/18
XL1200, WR1100, WV1100
249.00
SOY010
YD-CD-13/19
GP1200, GP1200R UP TO ‘99
249.00
SOY011
YD-CD-11/14
XL700, XL760, 760 VENTURE, WBII
249.00
SOY013
YB-CD-13/17
SUPERJET, upto 2008 701, GP760, XL800 ‘99
239.00
SOY014
YQ-CD-12/18
SUPERJET 2009 +
239.00
SOY018
YA-SC-14/19
WJ650, WR500, WJ500
189.00
SOY023
YV-CD-13/20
SVHO, FX SVHO (Cruiser) FZR, FZS ’14+
249.00
Yamaha Impellers
15
Solas Impellers
Sea-Doo Impellers
Part No
Code-Pitch
Description
Retail £
SOS022
SRZ-CD-13/18
RXT Wakepro/GTX 215hp 2009 + all models
249.00
SOS020
SRZ-CD-15/21
255hp/260hp 2009 + all models
249.00
SOS021
SRZ-CD-14/19
RXP 215hp 2009 + all models
249.00
SOS001
SRX-CD-13/18
RXT, GTX LTD (215HP) WAKE SC upto 2008
249.00
SOS002
SRX-CD-14/19
RXP stock upto 2008
249.00
SOS002.1
SRX-CD-15/21
RXP-X, RXT-X STOCK & LIMITED upto 2008
249.00
SOS003
SRX-CD-15/20
RXP, RXT (MODIFIED) upto 2008
249.00
SOS004
SR-CD-13/21
GTX 4-TEC SUPERCHARGE MODIFIED
249.00
SOS005
SR-CD-12/20
GTX 4 TEC SUPERCHARGE STOCK
249.00
SOS006
SR-CD11/19
GTX 4 TEC
249.00
SOS007
ST-DF-13/19
ALL 951 ENGINES (EXCEPT GSX LTD ‘97)
239.00
SOS010
SE-SC-13/16
GSX LIMITED - 1997 Model Only
239.00
SOS011
SF-CD-15/23
GSX RFI, GTX RFI
239.00
SOS012
SD-CD-15/23
ALL 782 ENGINES (STOCK)
239.00
SOS013
SD-CD-16/24
ALL 782 ENGINES (MODIFIED)
239.00
SOS016
ST-CD-10/16
GTI, GTI LE, GTI RFI, GTS
239.00
SOS018
SD-SC-14/19
580, 650, 720
239.00
SOS019
SR-CD-10/18
GTI ’06 +
249.00
SOS023
SK-CD-12/17
Spark All Models
249.00
Race Prepared Performance Impellers by RIVA - Sea-Doo
Part No
Code-Pitch
Description
Retail £
SRX-CD-15/22R
SRX-CD-15/22R
ALL SEADOO UP TO 2008
339.00
SRZ-CD-15/20R
SRZ-CD-15/20R
ALL SEADOO 2011 & 2012
339.00
SRZ-CD-15/22R
SRZ-CD-15/22R
ALL SEADOO 2009 & 2010
339.00
SRZ-CD-15/19R
SRZ-CD-15/19R
ALL SEADOO 260hp 2013 - 2014
339.00
Race Prepared Performance Impellers by RIVA - Yamaha
YS-DF-13/22R
YS-DF-13/22R
FX-SHO, FZR, FZS
16
339.00
Blowsion Stand Up Products
Billet Steering System
Features: CNC manufactured from billet aluminum & stainless steel for added strength. Heavy
duty bearings - top sealed bearing for durability & lower thrust bearing for smooth turning.
Three O-rings to protect the bearings from salt water corrosion while the redesigned shortened
turn plate moves the rider to a more forward position to reduce porpoising and allow a more
aggressive riding position. With three steering ratio positions, the multiple bar clamp option allows
you to run standard straight or freestyle bars, as well as Phat Clamped 1 1/8 inch tapered straight
and riser handlebars. Removable steering arm on turnplate allows you to adjust the turn-plate
between Yamaha & Kawasaki applications. Please note: the system works with all 2009 and
older Blowsion and UMI turnplates as well as most aftermarket brands. Bars and Phat Clamp are
sold separately.
Part No: 03.05.004 - £189.00
Kommand Phat Clamp
Constructed of 6061 Aluminum and carbon grey anodized this ultra trick clamp allows the rider
to move even further forward in the tray. Allows rider to retrofit Blowsion, UMI and many other
steering system turn plates on the market to run the Blowsion straight and V Riser Phat bars.
Developed in conjunction with Blowsion Pro Freeriders Ross Champion and Pierre Maixent
Part No: 03.05.018 - £79.95
Blowsion Kommand Handlebars
Freestyle V shape design with cross bar, 0 & 4 degree bend - Part No: 03-05-141 - £59.95
Standard diameter straight bar - Part No: 03-05-147 - £59.95
Phat Design oversized straight bar (for Phat Clamp only) - Part No: 03-05-145 - £59.95
Phat Design oversized rise bar (for Phat Clamp only) - Part No: 03-05-146 - £59.95
Billet Throttle Lever
The new Blowsion straight pull finger throttles provide superior fit and feel whether you are on the
waves or on the buoys. Lever angle is situated to reduce hand and arm fatigue. Delrin bushings
eliminate the play common in OEM throttles and provide a smooth throttle pull. All stainless
hardware at the hinge point eliminates corrosion and play. No C clips used. Available for all
models. Available in anodized Silver, Black, Orange, Red, Yellow, Blue and Lime Green.
Part No: 03.01.065 - £59.95
Throttle adapters must be used when installing. Available for Kawasaki, Yamaha, Seadoo - see
below.
Throttle Cable Adapters
Required when fitting Billet Throttle Lever.
UMI036 - Yamaha throttle cable adapter - £9.95
UMI037 - 96+ Kawasaki throttle cable adapter - £9.95
UMI038 - Sea-Doo throttle cable adapter - £9.95
17
Blowsion Stand Up Products
Pole Spring
Heavy duty handlepole spring for the 96+ Super Jet and 94-95 Yamaha FX1. Drop in fit and well
high tension design for those riders desiring a feather light handlepole. No more broken springs or
2 hour/2 beer installations!
BS33 - ‘96+ Superjet - £34.95
BS33.1 -Kawasaki 750SX / 800SXR Pole Spring - £39.95
Billet Bilge Outlets
Blowsion machined aluminum bilge fittings are a clean replacement of the bulky plastic fittings
usually supplied with aftermarket bilge pump kits. These fittings have a hose flange machined on
them so no hose clamp is necessary. Available in anodized silver, black, green, red, yellow/gold,
blue and orange.
Part No: 04.03.028 - £14.95
Water By-Pass Fitting
Blowsion water bypass fittings increase engine performance by diverting some of the water from
the cylinder head to the bypass fitting, rather than forcing all of the water through the exhaust
system. The machined bypass fitting are angled at 90 degrees. Available in anodized silver, black,
violet, blue, green, yellow-gold and red
Part No: 04.03.005 - £14.95
Alluminum Nose Bushes
Billet aluminum bow eye bushings. Available in anodized blue, green, orange, red, yellow/gold,
black and silver.
Part No: 04-03-047 - £14.95
ODI & Troy Lee Lock On Grips
Part No
Description
Retail £
BS50
Ruffian: black
24.95
BS51
Extreme: black, red
24.95
BS52
Rogue: black
24.95
BS53.2
Troy Lee Design: Yellow
24.95
BS53.3
Troy Lee Design: White
24.95
BS53.4
Troy Lee Design: Orange
24.95
ODI Extreme
Thinner grip, medium
composition
ODI Rogue
Thicker grip, softer composition
ODI Ruffian
Good universal grip
Troy Lee Design Grips in White, Yellow & Orange
18
Bilge Pump Kits
Kawasaki Bilge Pump Kits
Part No
Description
Retail £
BK07
Kawasaki Stand Up with Handlebar Mounted On/Off Switch
159.95
BK08
Kawasaki Stand Up with Panel Mounted On/Off Switch
129.95
BK09*
Kawasaki Sit Down with Handlebar Mounted On/Off Switch*
139.95
BK10
Kawasaki Sit Down with Panel Mounted On/Off Switch
99.95
Yamaha Bilge Pump Kits
BK01
Yamaha Superjet with Handlebar Mounted On/Off Switch
159.95
BK02
Yamaha Superjet with Panel Mounted On/Off Switch
109.95
BK03
Yamaha Sit Down with Handlebar Mounted On/Off Switch
139.95
BK04
Yamaha Sit Down with Panel Mounted On/Off Switch
99.95
Sea-Doo Bilge Pump Kits
BK05
Sea-Doo with Panel Mounted On/Off Switch
99.95
BK06*
Sea-Doo with Handlebar Mounted On/Off Switch*
139.95
* Handlebar mounted on/off switch can only be installed if PWC is fitted with aftermarket handlebars.
Bilge System Components
Part No
Description
Retail £
HP001
500GPH Pump
29.95
HP003
Kawasaki Stand Up Handlebar Mounted On/Off Switch
79.95
HP004
All Yamaha Handlebar Mounted On/Off Switch
79.95
HP006
Universal Handlebar Mounted On/Off Switch
79.95
HP007
Panel Mounted On/Off Switch
59.95
HP010
Yamaha Bilge Bracket – Superjet ‘95+
29.95
HP015
Kawasaki Bilge Bracket – 800SXR
29.95
HP011
Bilge Hose (2’)
9.95
HP012
Electrical Fitting Kit
9.95
UMI025
Alloy Bilge Outlet for in 8 colours see below
16.95
RY8100
Yamaha Duck Bill Quick Drain Kit
34.95
RS8100
Sea Doo Duck Bill Quick Drain Kit
34.95
BS41
Kawasaki Duck Bill Quick Drain Kit
34.95
RY8100A
Duck Bill Replacement Valve
19.95
19
All Stand Up PWC Kits Include:
• 500GPH Bilge Pump
• On/Off Switch
• Bilge Mounting Bracket
• Bilge Hose
• Electrical Fitting Kit
• Alloy Bilge Outlet
• Step-by-Step Fitting Instructions
All Sit Down PWC Kits Include:
• 500GPH Bilge Pump
• On/Off Switch
• Bilge Hose
• Electrical Fitting Kit
• Alloy Bilge Outlet
• Step-by-Step Fitting Instructions
Batteries & Spark Plugs
Batteries
EW1312
AGM Sealed gel battery
59.95
EW1313
Varta battery kit - Kawasaki 98+
89.95
EW1313.1
Sea-Doo Stroke Battery
99.95
EW1314
Optimate 4 battery charger
59.95
Lead Acid Battery. Specifically designed for the
use of all Sea-Doo 4 Stroke Watercraft.
EW1313.1 - £99.95
Totally Sealed Gel Battery. 12Volt 20AH. Valve Regulated.
High Density Active Plate Material.
Dimensions: W 175mm. D 70mm. H 165mm
EW1312 - £59.95
NGK Spark Plugs
NGK001
BR8ES
3.45
NGK002
BR7ES
3.45
NGK003
BR7HS
3.45
NGK004
BR8HS
3.45
NGK005
BR9ES
3.45
NGK006
BR8ES-11 - Yamaha GPR
3.45
NGK007
DCPR8E - Sea-Doo 4-Stroke
5.50
NGK007.1
ZFR4F-11 – Sea-Doo 951 DI
4.95
NGK008
CR9EB - Yamaha 4-Stroke
5.95
NGK009
CR9EK - Kawasaki 4-Stroke)
9.10
NGK010
PZFR7G-G - Kawasaki Di
NGK011
Waterproof Plug Caps - each
4.95
NGK014
PMR9B – Kawasaki 250/260
14.95
NGK016
LFR6A-11 Yamaha SHO/FZR/FZS
Lead Acid Sealed Battery for the use with
all Kawasaki ‘98 + Models.
EW1313 - £89.95
NGK Waterproof Plug Caps
14.95
3.95
20
Accessories
Castrol
Oils
RIVA Accessories
RY8-A2394
Anchor Sack - Red, Blue or Yellow
39.95
RY8500
Universal Flush Kit
29.00
A8582
Yamaha Flush Kit End
29.00
RS8500
Sea-Doo Flush Kit - up to 1996
14.00
RYWL
Universal Floating Lanyard
(not for Sea-Doo DESS)
18.95
RS8CL
Sea-Doo DESS Floating Lanyard
29.95
VP Racing Fuel Jugs
VP08
Fuel Jug, Red - 20 litres
44.50
VP09
Fuel Jug, Blue - 20 litres
44.50
VP10
Fuel Jug, White - 20 litres
44.50
VP05
Replacement filler tube
9.95
VP06
Replacement Twist Cap
9.95
VP07
Replacement Vent Cap
5.95
All Fuel Jugs come complete with filler tube.
21
TOP END REBUILD KITS -‐ KAWASAKI
Each kit includes: Pistons, Rings, all Gaskets needed and Upper Needle Bearings
MODEL KAWASAKI
550SX
YEAR
SIZE
PART NO
RRP
82-‐90
STD-‐1.00
010-‐812
£149.00
650 ALL
91-‐96
STD-‐1.00
010-‐810
£169.00
750 20mm
92-‐95
STD-‐1.00
010-‐820
£169.00
750 22mm
95-‐97
STD-‐1.00
010-‐821
£189.00
800
ALL
STD-‐1.00
010-‐843
£210.00
900
ALL
STD-‐1.00
010-‐840
£269.00
900STX
97-‐98
STD-‐1.00
010-‐840.1
£299.00
1100STX
1100ZXI
97-‐99
96-‐03
STD-‐1.00
010-‐821
£299.00
1100STX DI
00-‐03
STD-‐1.00
010-‐842
£310.00
1200 ULTRA 150
1200STXR
99-‐05
STD-‐1.00
010-‐841
£310.00
STX-‐12F
03-‐'07
STD-‐.50
010-‐844
£479.00
STX-‐15F
04-‐'07
STD-‐.50
010-‐845
£479.00
ULTRA 250X
07-‐'08
STD
010-‐846
£539.00
ULTRA 260
09-‐'10
STD
010-‐847
£539.00
ULTRA 300
11-‐'13
STD
010-‐848
£539.00
LINE ONE DISTRIBUTORS LTD: 01285 655123. [email protected]
P.22
TOP END REBUILD KITS -‐ SEA-‐DOO
TOP END REBUILD KITS SEA-‐DOO
Each kit includes: Pistons, Rings, all Gaskets needed, Small End Bearings
MODEL
SEADOO
580
YEAR
SIZE
PART NO
RRP
92 +
STD-‐1.00
010-‐815
£189.00
650
94 +
STD-‐1.00
010-‐816
£189.00
720
ALL
STD-‐1.00
010-‐817
£189.00
800
ALL
STD-‐1.00
010-‐818
£189.00
800RFI
ALL
STD-‐1.00
010-‐808
£189.00
951 CARB
ALL
STD-‐1.00
010-‐819
£259.00
951DI
ALL
STD-‐1.00
010-‐809
£259.00
4-‐TEC
03 '07
STD-‐.50
010-‐860
£369.00
GTX 4-‐TEC
185HP
05 '06
STD-‐.50
010-‐861
£369.00
GTX 4-‐TEC
RXP, RXT
S/CHARGED
215.255.260
05 '13
STD-‐.75
010-‐862
£499.00
LINE ONE DISTRIBUTORS LTD TEL: 01285 655123. [email protected]
P.23
TOP END REBUILD KITS -‐ YAMAHA
Includes Pistons, Rings, all Gaskets needed and Upper Needle Bearings
MODEL YAMAHA
701 (61X)
YEAR
SIZE
PART NO
All
Std -‐ 1.00
010-‐825
£169.00
760
All
Std -‐ 1.00
010-‐826
£199.00
800
All
Std -‐ 1.00
010-‐828
£229.00
1100 2T
All
Std -‐ 1.00
010-‐827
£279.00
1200 non PV
All
Std -‐ 1.00
010-‐826
£320
1200R
All
Std -‐ 1.00
010-‐829
£369.00
1300 GPR
All
Std -‐ 1.00
010-‐824
£359.00
FX140
All
Std -‐ .50
010-‐870
£390.00
FX 140 HO
All
Std -‐ .25
010-‐871
£390.00
VX 1100
All
Std -‐ .25
010-‐872
£390.00
FX 1800
All
Std -‐ 1.00
010-‐873
£520.00
FX 1800 HO
All
Std -‐ 1.00
010-‐874
£529.00
P.24
RRP
SMALL END BEARINGS -‐ ENGINE VALVES
KAWASAKI
650
750/900 20MM
750/800/1100 22MM
1200 ULTRA
010-‐110
010-‐113
010-‐117
010-‐118
£9.95
£9.95
£9.95
£9.95
010-‐120
010-‐128
£9.95
£9.95
010-‐121
010-‐119
010-‐122
£9.95
£9.95
£9.95
YAMAHA
650/701/760
800/1200R/1300R
SEA-‐DOO
720/800
951
4-‐TEC 4 STROKE ENGINE VALVES
INTAKE VALVES
KAWASAKI
ALL 4 STROKES (8 REQ'D)
010-‐011
£16.95
SEA-‐DOO
4-‐TEC (6 REQ'D)
4-‐TEC RACE SPEC
010-‐005
010-‐005R
£14.95
£29.95
YAMAHA
FX 140 / VX1100 (4 REQ'D)
FX 140 / VX1100 (8 REQ'D)
FZR /FZS / VXR / VXS /FX '08+
010-‐020
010-‐015
010-‐016
£7.95
£7.95
£12.95
EXHAUST VALVES
KAWASAKI
ALL 4 STROKES (8 REQ'D)
010-‐012
£29.95
SEA-‐DOO
4-‐TEC (6 REQ'D)
4-‐TEC RACE SPEC
010-‐010
010-‐010R
£29.95
£36.95
YAMAHA
FX 140 / VX1100 (8 REQ'D)
FZR / FZS/ VXR / VXS / FX '08+
010-‐025
010-‐024
£12.95
£14.95
P 25
VALVE SPRINGS -‐ RETAINERS & KEEPERS
SEA-‐DOO VALVE SPRING INNER
(6 REQUIRED)
010-‐031
£4.95
SEA-‐DOO VALVE SPRING OUTER
(6 REQUIRED)
010-‐030
£4.95
YAMAHA VALVE SPRING INTAKE INNER
(12 REQUIRED)
010-‐032
£2.95
YAMAHA VALVE SPRING INTAKE OUTER
(8 REQUIRED)
010-‐033
£2.95
KAWASAKI VALVE SPRING RETAINER
(16 REQUIRED)
010-‐002-‐01
£4.95
SEA-‐DOO VALVE SPRING RTETAINER
(12 REQUIRED)
010-‐002
£4.95
SEA-‐DOO TITANIUM RETAINER
(12 REQUIRED)
010-‐001
£9.95
YAMAHA VALVE SPRING RETAINER
(16 REQUIRED)
010-‐002-‐02
£4.95
KAWASAKI VALVE KEEPERS
(32 REQUIRED)
010-‐059
£0.99
SEA-‐DOO VALVE KEEPERS
(SOLD IN PAIRS 24 REQUIRED)
010-‐003
£6.95
YAMAHA VALVE KEEPERS INTAKE
(24 REQUIRED)
010-‐057
£0.99
YAMAHA VALVE KEEPERS EXHAUST
(16 REQUIRED)
010-‐058
£0.99
VALVE RETAINERS
VALVE KEEPERS
P.26
CYLINDER HEADS
SEA-‐DOO 1503 4-‐TEC CYLINDER HEAD BARE CASTING
INCLUDES CASTING WITH VALVE SEATS & VALVE GUIDES INSTALLED
010-‐5000
2003 -‐ 2012
£495.00
SEA-‐DOO 1503 4-‐TEC CYINDER HEAD LOADED WITHOUT CAMS
INCLUDES CASTING WITH VALVES, VALVE SEATS, VALVE GUIDES, VALVE SPRINGS
VALVE SEALS, VALVE RETAINERS AND LOCKS INSTALLED.
010-‐5000K
2003 -‐ 2012
£799.00
YAMAHA 1100 4-‐STROKE CYLINDER HEAD BARE CASTING
INCLUDES CASTING WITH CAM HOLD DOWNS, VALVE SEATS, VALVE GUIDES INSTALLED
010-‐5005
2004 -‐ 2008 1100 FX HIGH OUTPUT
2005 -‐ 2012 1100VX
£899.00
YAMAHA 1100 4-‐STROKE CYLINDER HEAD LOADED (WITHOUT CAMS)
INCLUDES CASTING WITH CAM HOLD DOWNS, VALVES, VALVE SEATS, VALVE GUIDES
VALVE SPRINGS, VALVE SEALS, VALVE RETAINERS AND LOCKS INSTALLED
(TAPPETS AND SHIMS NOT INCLUDED)
010-‐5005-‐01
2004 -‐ 2008 1100 FX HIGH OUTPUT
£1,299.00
YAMAHA 1100 4-‐STROKE CYLINDER HEAD LOADED (WITH CAMS)
INCLUDES CASTING WITH CAMS, CAM HOLD OWNS, VALVES, VALVE SEATS
VALVEGUIDES, VALVE SPRINGS, VALVE SEATS, VALVE RETAINERS AND LOCKS INSTALLED
(TAPPETS AND SHIMS NOT INCLUDED)
010-‐5005K
2004 -‐ 2008 1100 FX HIGH OUTPUT £1690.
P.27
CAM SHAFTS -‐ CHAINS -‐ GUIDES
CAM SHAFTS
010-‐085 -‐ SEA-‐DOO 4-‐TEC
2002 -‐ 2008
£259.00
010-‐086 -‐ YAMAHA FX 140 INT
2002 -‐ 2008
£129.00
010-‐087 -‐ YAMAHA FX 140 EXH
2002 -‐ 2008
£129.00
CAM CHAIN SPROCKET
010-‐080 -‐ YAMAHA VX / FX 1100
£29.95
TIMING CHAINS
010-‐064 -‐ KAWASAKI STX 12/15F
£49.95
010-‐060 -‐ SEA-‐DOO 4 TEC ALL MODELS
£49.95
010-‐062 -‐ YAMAHA FX 140 / FX / VX
£22.95
010-‐063 -‐ YAMAHA FX 1800
£26.95
TIMING GUIDES
010-‐070 -‐ SEADOO T / GUIDE
O.E: 420.236.540 4-‐TEC ALL £3.95
010-‐071 -‐ SEA-‐DOO C / GUIDE
O.E: 420.236.500 4-‐TEC ALL £4.95
010-‐073 -‐ YAMAHA GUIDE 2
O.E: 5B122410000 FX 140 / VX1100
£5.95
010-‐074 -‐ YAMAHA DAMPER 1
O.E: 4XV122520000 FX 140 / VX 1100
£26.95
010-‐075 -‐ YAMAHA DAMPER 2
O.E: 4XV122510000 FX 140 / VX 1100
£15.95
P.28
WSM SEA-‐DOO CRANKSHAFTS
SEA-‐DOO
010-‐1017WSM
720 ALL
£465.00
010-‐1018WSM
800 CARB
£499.00
010-‐1018-‐01WSM
800 RFI
£525.00
010-‐1019WSM
951 CARB
£525.00
010-‐1019-‐01 WSM
951 DI
£525.00
010-‐1060WSM
4-‐TEC 2003 -‐ 2005
(Web Only)
4-‐TEC 2006 -‐ 2009
(Web Only)
£620.00
010-‐1061WSM
£799.00
010-‐471-‐01
010-‐471
CRANK CENTRE GEAR 580
CRANK CENTRE GEAR 650/720/800
010-‐190
010-‐190-‐05
4-‐TEC CRANK BEARING SHELL (4 REQD)
4-‐TEC CRANK BEARING SHELL (4 REQD)
010-‐191
010-‐191-‐05
4-‐TEC CENTRE MAIN THRUST HALF (2 REQD) STD
4-‐TEC CENTRE MAIN THRUST HALF (2 REQD) 0.50
010-‐192
010-‐192-‐05
£29.95
£29.95
STD
0.5
£14.95
£19.95
£14.95
£19.95
4-‐TEC LOWER ROD BEARING (3 REQD)
STD
£10.95
4-‐TEC LOWER ROD BEARING (3 REQD)
0.5
£19.95
P.29
WSM YAMAHA CRANKSHAFTS
010-‐1025WSM
650 / 701 / 760
£420.00
010-‐1028WSM
800 ALL
£579.00
0101025WSM
1100 2 STROKE ALL
£579.00
010-‐1026WSM
1200 ALL
£579.00
010-‐1028-‐01WSM
1200R 1300R
(Web Only)
ALL FX/VX 1000-‐1100
(Web Only)
£720.00
010-‐1072WSM
£799.00
LINE ONE DITSRIBUTORS LTD. 01285 655123. [email protected]
P.30
Gaskets & Oil Seals
Maintenance
Kawasaki Top End Gasket Kits
Part No
Description
GTK10
Crank Case Seals
Retail £
GTK01
Kawasaki 440, 550
19.95
440
24.95
GTK02
Kawasaki 650, 750
19.95
GTK11
JS 550 ‘86-90
24.95
GTK03
Kawasaki 900, 1100
19.95
GTK12
550SX ‘91+
29.95
GTK04
Kawasaki Ultra150, STX-R
19.95
GTK13
650
34.95
GTY01
Yamaha 650, 701, 760, 1100, 1200
24.95
GTK14
750
34.95
GTY02
Yamaha GP800 ‘98+
24.95
GTK15
800
34.95
GTY03
Yamaha GP1200R, XL1200LTD ‘99+
19.95
GTK16
900
64.95
GTS01
Sea-Doo 650, 720
14.95
GTK17
1100
64.95
GTS02
Sea-Doo 785, 800
14.95
GTK18
Ultra150, STX-R
79.95
GTS03
Sea-Doo 951 ‘98+
14.95
GTK19
250X, 260X
199.95
GTK20
300X
199.95
Yamaha Top End Gasket Kits
Sea-Doo Top End Gasket Kits
GTS010
720
49.95
GTS011
785/800 with seals
74.95
84.95
GTY10
650
29.95
GTS012
951 with seals
GTY11
701 up to ’95
39.95
GTS013
4-Tec Complete Kit W-Seals
GTY12
701 ‘96+
39.95
GTS014
951 Head Gasket
69.95
GTY13
760
39.95
GTS015
4-Tec Head Gasket
69.95
GTY14
800
49.95
GTY15
1100
59.95
Yamaha Complete Gasket Set with Oil Seals
GTY16
1200
129.95
GTY17
GP1200R, XL1200LTD, PV
149.95
GTY18
GP1300R
129.95
GTY19
FX140
129.95
GTY20
FXH0
129.95
GTY21
VX110
129.95
GTY22
FX SHO, VXR, VXS
169.00
Yamaha Superjet Individual Gaskets
GTY20
Head Gasket 96+
14.95
GTY21
Base Gasket 96+
4.95
GTY22
Exhaust Manifold Gasket 96+
6.95
GTY23
Flywheel Cover Gasket 96+
9.95
GTY24
Header Pipe Gasket
9.95
31
189.95
Heavy Duty Engine Mounts
Sea-Doo Engine Mounts
Yamaha Engine Mounts
580, 650, 720 - All Years
650, 701 Superjet
HPS01 - £32.95
HPY01 - £29.95
800, 951 Front - 1 Required
XL Ltd, XLT 1200
HPS02 - £39.95
HPY02 - £44.95
800, 951 Rear- 2 Required
GP1200R, GP1300, GP1300R &
FX, VX110, FX Cruiser
HPS03 - £39.95
HPY03 - £44.95
All 4- Tec Rear - 2 Required
Waveblaster ll, FX1
HPS04 - £36.95
HPY04 - £36.95
All 4 –Tec Front - 1 Required
GP800, GP1200, XL1200
XLT800, GP760, 1200 SUV
Waveblaster 1 & 800
HPS05 - £37.95
HPY05 - £36.95
GP800R,
Kawasaki Engine Mounts
HPY06 - £39.95
JS440, JS550
HPK01 - £34.95
650, 750 (except ZXi)
900 & 1100STX
Heavy Duty Engine Mounts
HPK02 - £34.95
750, 900, 1100ZXi
Stronger than
Original Manufacturer
Ultra 150/STXR Rear
2 Required
HPK03 - £37.95
Ultra 150/STXR Front
1 Required
Up to 50% Cheaper than
Original Manufacturer
HPK04 - £37.95
32
SEA-‐DOO OIL PUMP REPAIR KITS. OIL BLOCK OFFS
PRIMARY OIL PUMP REPAIR KIT (REAR)
FITS ALL 4-‐TECS '02 -‐ '14
PLEASE SEE IMAGE AS TO THE CONTENTS OF KIT
010-‐1200
£99.95
SECONDARY OIL PUMP REPAIR KIT
FITS ALL 4 STROKES (EXCEPT RXP)
010-‐1205
£99.95
SECONDARY OIL PUMP KIT (FRONT)
2005 RXP ONLY
010-‐1215
£99.95
SECONDARY OIL PUMP REPAIR KIT (FRONT)
FITS ALL 2006 -‐ 2012 4 STROKES
PLEASE SEE IMAGE AS TO THE CONTENTS OF THE KIT
010-‐1215
£99.95
OIL PUMP BLOCK OFF PLATES
KAWASAKI 011-‐205
650 / 750
011-‐206
900 / 1100
SEA-‐DOO
011-‐212
580 / 650 / 720
011-‐213
800 / 951
YAMAHA
011-‐205
650 / 701 / 760
011-‐216
1100 / 1200
011-‐206
800 / 1200R
£9.95
£9.95
£9.95
£9.95
£9.95
£9.95
£9.95
LINE ONE DISTRIBUTORS LTD. 01285 655123. [email protected]
P.33
YAMAHA 1200R CYLINDER KIT. YAMAHA SHORT BLOCK ENGINE
NO CORE EXHANGE / NEW CYLINDER
KIT INCLUDES : NEW NIKOSIL CYLINDER, POWER VALVE, PISTON KIT
FITS: GP 00 -‐ 2002, XL 99 -‐ 01, XLT 02 -‐ 05
010-‐6029K
£445.00
SEA-‐DOO 951 DI COMPRESSOR REBUILD KIT
KIT INCLUDES ROD, PISTON KIT, SLEEVE
010-‐9051K
£39.95
YAMAHA SHORT BLOCK ENGINES
INCLUDES CRANKCASES, CRANKSHAFT, PISTONS
010-‐6000-‐01
010-‐6001-‐01
FX CRUISER HO
04 -‐ '08
VX CRUISER, DELUXE, SPORT
YAMAHA ENGINE CASES
010-‐6000
FX HIGH OUTPUT
010-‐6001
VX 1100
05 -‐ '08
£3,369
£2,995
£1,189
£1,189
P.34
SHAFTS: DRIVE -‐ COUPLING -‐ PUMP. COMPLETE INTERMEDIATE HOUSINGS
YAMAHA
003-‐170
003-‐181
003-‐178
003-‐182
003-‐182-‐01
SUPERJET
XL, XLT, FX140
GPR
FXHO, VXR, VXS
FZR, FZS
£190.00
£190.00
£190.00
£229.00
£229.00
SEA-‐DOO
003-‐156
003-‐158
003-‐158-‐01
ALL GTX 4TEC
RXP, RXP-‐X
GTXLTD, RXT
£179.00
£179.00
£179.00
003-‐158-‐01KIT
CHANGES OE STYLE O-‐RING SEA-‐DOO DRIVESHAFT TO A CLIP STYLE DRIVESHAFT
FOR CONTENTS OF KIT PLEASE SEE IMAGE BELOW
£339.00
YAMAHA COUPLING SHAFTS
003-‐250
003-‐253
003-‐255
003-‐260
SUPERJET '96 -‐ 2009
GP1200/800
XLT, 1300GPR
FXHO, SHO, FZR, FZS, VXR
£99.00
£170.00
£159.00
£159.00
SEA-‐DOO IMPELLER PUMP SHAFTS
003-‐106
003-‐108
003-‐113
003-‐113-‐01
003-‐113-‐02
580, 650, 720, 800
951 ST RANGE
4-‐TEC ALL '02 '03
4-‐TEC ALL 04-‐ '08
4-‐TEC ALL '09 -‐ '14
£65.00
£65.00
£65.00
£65.00
£65.00
KAWASAKI INTERMEDIATE BEARING HOUSING COMPLETE
003-‐405-‐01
ALL 650, 750, 800, 900 4-‐STROKES
£110.00
YAMAHA INTERMEDIATE BEARING HOUSING COMPLETE
003-‐402-‐01
EARLY 650
003-‐400-‐01
701, 760, 1100, 1200,XLT, GPR
£149.00
£149.00
SEA-‐DOO INTERMEDIATE BEARING HOUSING COMPLETE
003-‐115-‐01
580, 650, 720
003-‐116-‐01
ALL XP '97 -‐ 04
£49.95
£49.95
P.35
P.34
DRIVESHAFT & JET PUMP REBUILD KITS
SEA-‐DOO DRIVESHAFT REBUILD KITS
003-‐118-‐KIT
XP96, GS, GTI, GTX, SP, SPX
003-‐118-‐01-‐KIT
GTX 4-‐TEC '05, RXT '05+, GTI06
003-‐118-‐02-‐KIT
GTX 4-‐TEC '06+, RXP '04+
£69.00
£99.95
£89.95
JET PUMP RE-‐BUILD KITS
KAWASAKI
003-‐609
STX 900, 1100, STX-‐R12,15 -‐ '04
003-‐606
ULTRA 150 ALL
003-‐607
650, 750, 800
003-‐608
ZXI 750, 900
003-‐614
STX-‐R 12F, 15F '05+
003-‐614-‐01
260X, 300X
£45.00
£52.95
£45.00
£45.00
£52.95
£52.95
YAMAHA
003-‐626
003-‐627
003-‐629
003-‐630
003-‐631
003-‐638
003-‐628
VX110
GPR, XLT, SUV, FX
GP, XL
SUPEREJET, VXR, FX1, WB1
WR1100, WB 760, XL760
FX140, FXHO
FZR, FZS, VXR, VXS, FX1800
£39.95
£39.95
£39.95
£39.95
£39.95
£39.95
£39.95
SEA-‐DOO
003-‐640
003-‐641
003-‐643
003-‐644
003-‐645
580, 650
720, 800, 951 UP TO '98
951 '99+
GTX 4-‐TEC '02 -‐ '03
ALL 4-‐TEC '04+
£49.95
£49.95
£59.95
£69.95
£69.95
P.36
JET PUMP WEAR RINGS & HOUSINGS
O.E STYLE SEA-‐DOO WEAR RINGS
003-‐499
4-‐TEC 215, 255, 260HP 003-‐502
4-‐TEC 155, 185HP 003-‐503 951 4-‐TEC '02 -‐ '03
003-‐500
580, 650, 720, 800
STAINLESS STEEL SEA-‐DOO WEAR RINGS
SOWR
4-‐TEC 215, 255, 260HP
SOWR1
GTX-‐4TEC SUPERCHARGE
SOWR2
SPARK
163-‐81590
SPARK WEAR RING SEAL
£59.95
£59.95
£49.95
£49.95
£129.95
£129.95
£179.95
£29.95
YAMAHA PUMP HOUSING WITH REMOVABLE COMPOSITE LINER
003-‐505
GP, WV 1100
£149.95
003-‐506
GP800, 760
£149.95
003-‐505-‐01
760WB
£149.95
003-‐507
701 SUPERJET
£129.95
003-‐508
GPR, XLT, VX110, FX SHO
£179.95
REPLACEMENT COMPOSITE LINERS FOR ABOVE
003-‐521
FITS 003-‐506/507
003-‐520
FITS 003-‐505
003-‐522
FITS 003-‐508
£39.95
£39.95
£39.95
YAMAHA SUPERJET ALLUMINUM INTAKE DUCT
02-‐02-‐432 FITS ALL YEARS SUPERJET & WAVEBLASTER £149.00
P.37
DRIVE COUPLERS & SEA-‐DOO COMPLETE JET PUMP HOUSINGS
YAMAHA
003-‐219
24MM 3 FINGER D/SHAFT
003-‐220
27MM 3 FINGER CRANK
003-‐221
27MM 5 FINGER
003-‐222
24MM 5 FINGER
003-‐223
27MM 5 FINGER
003-‐224
24MM 5 FINGER
PRICE IS FOR ONE COUPLER.
COUPLING RUBBERS
003-‐204
003-‐206
003-‐207
O.E # 6R745813-‐CA
£29.95
O.E #6M645813328P
£29.95
O.E # 63M45813019M £29.95
O.E # 64T45813018P
£29.95
O.E # 66E458131094
£29.95
O.E # 68N455930094
£29.95
USE WITH 003-‐223/224
USE WITH 003-‐219/220
USE WITH 003-‐221/222
£19.95
£14.95
£14.95
SEA-‐DOO COMPLETE JET PUMP HOUSING
INCLUDES HOUSING, WEAR RING, BEARINGS, OIL SEALS, O RINGS, PUMPSHAFT & PUMP CONE.
003-‐700K
720,800
£399.95
003-‐710K
951
£399.95
003-‐720K
4-‐TEC 130/155HP (SOLAS SR RANGE)
£399.95
003-‐721K
4-‐TEC 215/255HP (SOLAS SRX RANGE)
£399.95
003-‐723K
09 -‐ '13 4-‐TEC 215/255/260 (SOLAS SRZ RANGE) £399.95
P.38
Carburetter Re-build Kits
Carburetter Re-Build Kits
Mikuni I Series 44mm
Fits:
Yamaha GP800, GP800R, XL800, XLT800, GP1200R, XL1200LTD, XLT1200.
HP080 - £59.95
Mikuni I Series 46mm
Fits:
Sea-Doo 951 ’98 + (XP Ltd, GTX Ltd, GSX Ltd)
HP081 - £59.95
Mikuni Super BN38, 44, 46mm
Fits:
Yamaha SJ650, SJ701, WB701, 650T, 650TX, 700TX, PROVXR,650TL, 700TL, WRIII, FX1,
WR701, WR760, WR1100, WV701, WV760, WV1100, GP760, GP1200, XL760, XL1200.
Kawasaki 750’98 to’02, 800SXR,
Sea-Doo 720, 800
HP082 - £59.95
Mikuni BN38, 44
Fits:
Kawasaki JS300/440/550 up to 1990
Sea-Doo 580, 650
HP083 - £54.95
Keihin 38, 40mm 42mm CDK II
Fits:
Kawasaki JS550SX (silver engine), 650 (silver engine), 750 ’93 to‘97,
900ZXi, 900STX, 1100ZXi.
HP084 - £79.95
Keihin 28mm
Fits:
Kawasaki 650 with black engine.
HP085 - £49.95
Ultra 150
Carb Re-Build KIt
HP086 - £69.95
Kawasaki Fuel Pump Rebuild Kit
006-405 - £19.95
39
SEA-‐DOO THROTTLE BODY -‐ PRIMER KITS -‐ FUEL & COOLING LINE
4-‐TEC COMPLETE THROTTLE BODY
006-‐100
FITTS ALL 4 TEC
£335.00
006-‐600
UNIVERSAL 90 DEGREE FUEL VALVE
£14.95
006-‐602
UNIVERSAL STRAIGHT FUEL VALVE
£14.95
HP030
HP031
HP031
MIKUNI SINGLE PRIMER KIT
MIKUNI DUAL PRIMER KIT
MIKUNI TRIPPLE PRIMER KIT
£19.95
£24.95
£29.95
HP033
HP034
HP035
KEIHIN SINGLE PRIMER KIT
KEIHIN DUAL PRIMER KIT
KEIHIN TRIPPLE PRIMER KIT
£19.95
£24.95
£29.95
PRIMER KITS
COLOURED FUEL LINE
SOLD PER FOOT. AVAILABLE IN BLUE, ORANGE, GREEN
£2.00
COLOURED COOLING LINE
SOLD PER FOOT. AVAILABLE IN BLUE, BLACK
£3.50
P.40
AIR FILTERS
YAMAHA WASHABLE AIR FILTERS
006-‐590
006-‐592
006-‐594
SHO, FZR, FZS HO
£99.95
VX1100 CRUIS, SPORT, DELUXE £69.95
FX140, FX CRUISER
£99.95
TAUCETI AIR FILTERS: FA-‐PRO-‐2.5
£54.95
TAUCETI CARB ADAPTERS SOLD INDIVIDUALLY
AD-‐S38-‐11
YAMAHA SUPERJET
AD-‐140-‐11
KAWASAKI 800SXR
DELTA FORCE V3 REED BLOCK ASSEMBLY
V3W150-‐2
YAMAHA SUPERJET
V3W150-‐2
KAWASAKI 800SXR
£19.95
£19.95
£229.00
£229.00
P.41
Motul Oil Products
and Fuel & Oil Filters
Watercraft
Covers
Fuel & Oil Filters
Part No
Description
Retail £
OFY01
Kawasaki / Yamaha (Not SHO, FZR, FZS) Oil Filter
OFY03
Yamaha Oil Filter for SHO/FZS/FZR
OFS01
Sea-Doo 4 Stroke Oil Filter
9.95
OFS04
7.95
RY0501
Yamaha Fuel Filter – All Non Powervalve
14.95
RY0502
Yamaha Fuel Filter – All GPR & XLT Powervalve
14.95
HTA09
4 Stroke Oil Extractor
54.95
9.95
14.95
Yamaha / Kawasaki Oil Filter
Yamaha Fuel Filter
Fits all Non Powervalve
Yamaha Engines
Yamaha Fuel Filter
All GPR & XLT Powervalve Engines
4 Stroke Oil Extractor
Motul Marine Products
Part No
Description
Retail £
M01
Specific Dijet 2-Stroke Oil.
100% Synthetic biodegradable lubricant specially designed
for PWC with Direct Injection or carburetted engines. High
Speciation Race Bred Oil for SD 800/951
Ester-based 80% Biodegradable formula according to
standard CEC L-33-A93
API TC, JASO FC, ISO-L-EGD (4 Litre Bottle)
39.00
M02
Powerjet 2-Stroke Oil.
Mineral Based lubricant for 2-Stroke engines. Excellent level
of cleanliness guaranteed by the NMMA TC-W3 Standard. (4
Litre Bottle)
29.95
M03
Powerjet 4-Stroke Oil.
Technosynthese 10W40 lubricant specially developed for the
latest generation of High Performance 4-Stroke PWC, with or
without a turbo or supercharger. (4 Litre Bottle)
27.95
M04
E.Z.LUBE Multi-Protect 400m
Multi-use spray lubricant especially formulated for Marine
use. Helps to un-seize corroded parts and lubricates cables
and steering systems. Protects all metallic parts against
corrosion by leaving a protective film. Can also be used as a
fogging oil
4.95
42
Starter Motors
Aqua Torque Starters - Kawasaki
Aqua Torque Starters - Sea-Doo
Kawasaki Starter Motor
Fits 650, 750, 800, 900, 1100
Sea-Doo Starter Motor
Fits 580, 650, 720
AT001 - £199.95
AT007 - £199.95
Fits 440, 550
Fits 800 Eight Tooth Model
AT002 - £149.95
AT008-8 - £199.95
Fits Ultra 150, STX-R
Fits 800 Nine Tooth Model
AT003 - £229.95
AT008-9 - £199.95
Aqua Torque Starters - Yamaha
Fits 951
Yamaha Starter Motor
Fits 650, 701
AT009 - £209.95
AT004 - £199.95
Fits 4 TEC
Fits 800, 1100, 1200, 1300GPR
AT010 - £245.00
AT005 - £209.95
Aqua Torque Starter Bendix - All Models
Fits FX140
Starter Bendix
Fits all Yamaha - Kawasaki 650,
750, 800, 900, 1100 and SeaDoo 951
AT011 - £109.95
AT006 - £245.95
Fits 1800cc ‘08+
Aqua Torque starters produce
25% more torque than the
OEM equivelent
AT012 - £249.95
43
ELECTRICAL: SOLENOIDS -‐ IGNITION COILS -‐ CDIS -‐ RELAYS -‐ VOLTAGE REGULATORS
WE KEEP THE FOLLOWING ELECTRICAL COMPONENTS IN STOCK, IF YOU REQUIRE
A SOLENOID, IGNITION COIL, CDI, RELAY, COIL, VOLTAGE REGULATOR WHICH IS NOT LISTED
WE WILL ADD IT TO OUR WEEKLY STOCK ORDER.
SOLENOID
004-‐124 ALL YAMAHA '87 -‐ '01
O.E # 6G181941-‐10
004-‐125 ALL YAMAHA '02+
O.E. # 68N81940-‐00
004-‐120-‐02 SEA-‐DOO 2 STROKE & ALL 4-‐TEC O.E # 278 002-‐347
£29.95
£29.95
£24.95
IGNITION COIL
004-‐157 YAMAHA ALL 2-‐STROKE / KAWI 750
004-‐197 YAMAHA '08 -‐ '09 FX ALL + SHO O.E # 6S582310 00
004-‐199 YAMAHA FX & VX
O.E # 6D3823100000
004-‐174 SEA-‐DOO ALL MODELS
O.E # 290 664 020
£59.95
£94.95
£89.95
£69.95
004-‐231-‐01
SEA-‐DOO ALL 4-‐TEC & RFI O.E # 278 001-‐581
£99.95
004-‐212-‐01
YAMAHA SUPERJET CDI WITH ADJUSTABLE LIMITER
£229.95
P.44
SEA-‐DOO SUPERCHARGER RE-‐BUILD KIT
COMPLETE SUPER CHARGER REPAIR KIT
010-‐102K
ALL 4-‐TEC INTER-‐COOLED MODELS
215 & 255 HP (16 TOOTH)
£255.00
010-‐103K
GTX 4 TEC 2003 -‐ 2006 / ALL NON
INTERCOOLED & 185 HP MOTORS
£255.00
SEA-‐DOO ROTARY VALVE COMPLETE ASSEMBLY
010-‐455K
010-‐457K
580, 650, 720
800 ALL
£79.95
£79.95
YAMAHA POWER VALVES
Fits 800 -‐ 1300 all 95 -‐ 08
KIT IS FOR ONE POWER VALVE -‐ SEE IMAGE FOR KIT CONTENTS
010-‐500K
£89.95
YAMAHA CATALYTIC REMOVAL PLATE
010-‐600
010-‐605
GP1200R / 1300R / XLT1200 / XL 1200LTD
CAT TEMP SENSOR CHIP
£89.95
£19.95
P.45
SEA-‐DOO POWER VALVE RE-‐BUILD KITS
FITS: 800 95 -‐ 97, GSX / GTX 800 96 -‐ 97, SPX 800 97 -‐ 98
KIT IS FOR 1 POWER VALVE -‐ SEE IMAGE FOR CONTENTS OF KIT.
010-‐495K
£149.95
FITS: GSX RFI 800 99 01, GTI RFI 800 2003, GTX RFI 800 98 -‐ 99
KIT IS FOR ONE POWER VALVE -‐ SEE IMAGE FOR CONTENTS OF KIT 010-‐496K
£149.95
FITS GSX LTD 951 98 -‐ 99, GTX, LRV, RX 951 2000, GTX 951 01 -‐ 02, LRV 951 2001
KIT IS FOR ONE POWER VALVE -‐ SEE IMAGE FOR CONTENTS OF KIT
010-‐497K
£149.95
FITS GTX DI 951 00 -‐ 03, RX DI 951 00 -‐ 03, LRV DI 951 2002, 3D DI 951, XP DI 951 01 -‐ 04
KIT IS FOR ONE POWER VALVE -‐ SEE IMAGE FOR CONTENTS OF KIT
010-‐498K
£149.95
P.46
CABLES: THROTTLE -‐ STEERING -‐ REVERSE -‐ TILT
WE KEEP THE FOLLOWING CABLES IN STOCK, BUT IF YOU REQUIRE ANOTHER MODEL
WE CAN ADD IT TO OUR WEEKLY STOCK ORDER. AS A GENERAL RULE THEY ARE 50%
CHEAPER THAN O.E.M
YAMAHA THROTTLE CABLE
002-‐055-‐06
SUPERJET 1996 -‐ 2012
£65.00
YAMAHA STEERING CABLE
002-‐059-‐03
SUPERJET 1996 -‐ 2007
002-‐059-‐06
SUPERJET 2008 -‐ 2012
£79.95
£79.95
SEA-‐DOO STEERING CABLE
002-‐045-‐04
951 XP, DI, GTX, GTX LTD, 002-‐046-‐05
RXT -‐ 3 SEATER
002-‐046-‐06
RXP -‐ 2 SEATER
£119.00
£129.95
£129.95
LINE ONE DISTRIBUTORS LTD: 01285 655123. [email protected] P.47
k
u
.
o
.c
t
s
i
ed .uk
n
o
ne ist.co
i
l
.
w ned
w
w
eo 123
s:
r
n
i
e
l
d
5
@
r
5
s
o
6
e
5
ne l: sal
i
8
l
2
n
1
i
o
0
e m a Te l :
we also supply genuine OEM spare parts from Yamaha, Kawasaki and Sea-Doo

SPARE PARTS - Line One Distributors

Transcription

Similar documents

Yamaha News,ENG,No.6,1996,11月,11月,Growing from the roots up

performance ride plates - Jet

Spec Tech

Freefall Gear List

89-***-14

Sonic Advetnures Equipment List

G.M.C. CCKW 353 DUMP TRUCK

pgs. 1172-1175 - Marshall Distributing

studio library

kit fissaggio collettori solari termici orizzontali a 45° su

Sonic Advetnures Equipment List

Apresentação