moellermarine.com sceptermarine.com

Transcription

2014
moellermarine.com
sceptermarine.com
What’s New for 2014
Table of Contents
International / Dinghy Mates..3
USA Portable Tanks..4
Replacement Parts..5
Fluid Transfer &
Storage Technology
Engineered Specifically for the
Recreational Boating Industry
Topside Fuel Tanks..6
Fuel Line Assemblies..7
Primer Bulbs / Fuel Line Hose..9
Fuel Line Connectors..10
Clear Site™ Fuel Filters..11
Water Separating Fuel Filters..11
In-line Fuel Filters..12
Flo n’ Go™ Duramax, MaxFlo..13
Jerry Cans..15
Gas Walker..17
Dock Cart and Accessories..18
Permanent Tanks..19
Fuel Senders & Gauges..25
Fuel Accessories..26
Connectors & Teflon® Tape..27
Valves & Vents..28
Ice Station Zero Ice Chest..29
Swingback Coolers / Live Wells..30
Innovation. That’s what it’s always been about. The kind of innovation that looks beyond
current boundaries toward the possibility of something better, something stronger –
Moeller Marine Products and Scepter Corporation have made it happen.
Our companies have successfully formed a partnership in the marine aftermarket to bring
you a total program in fluid transfer and containment technology providing you a single
source solution for all of your products.
Combining manufacturing and marketing efforts, both companies are the recognized market leaders for innovation and fluid transfer systems.
OEM Select Products Based on innovation and
quality, boat and engine manufacturers rely on products supplied by Moeller Marine Products and Scepter
Corp. You now have the ability to purchase these same
products under our OEM Select offering. OEM Select means you can offer aftermarket
replacement parts supplied by the original equipment manufacturer.
Moeller Marine Products and Scepter Corp., your source for OEM Select fuel system components, topside and permanent fuel tanks, waste tanks, water tanks, battery boxes, drain
tubes & plugs, ice chests, seating and more!
Live Wells..34
Injection Molded Battery Boxes & Trays..35
Battery Accessories..36
Roto-Molded Battery Boxes..38
To take advantage of the best parts available, look for the SELECT logo throughout the
catalog to quickly identify our large selection of original equipment parts.
ECO Checked The “ECO Checked” symbol ensures that the products shown meet or
exceed state or federal regulations governing vapor emissions, helping to improve air quality and reduce exposure to
toxic chemicals. This symbol guarantees that products are of
the finest environmental quality. Look for the ECO Checked
symbol which will indicate approved jerry cans, fuel lines and
bulk hose items.
Fluid Extractors..39
Drain Tubes, Fittings & Flanging Tools..40
Snap-Tite® & Turn-Tite® Bailer Plugs..41
Drain Plug / Grommets..42
Motor Flushers..45
Funnels, Storage & Snubber..46
Marine Paint..47
Low Permeation Certified A United States CARB/EPA
regulatory time line has been established by the Federal
and State agencies that set the permeation level requirements for all Marine Tank Fuel Hoses. This change took
effect January 1, 2009; all fuel hoses must meet the following permeation requirements: < 15 g/m2/day. Permeation can be described as a “wicking
effect” in which the hydro carbon molecules, in the fuel, migrate through the wall of the fuel
line. Canada has introduced MERV legislation governing emission compliance standards for
selected marine products made and/or sold in Canada on certain 2012 and later models. For
additional information visit the Scepter marine website (www.sceptermarine.ca).
All Moeller & Scepter “Low Permeation” hoses will be certified and an executive order will
be present on the hose to indicate the hose meets Federal and State compliancy regulations.
Look for this “Low Permeation” icon on our new fuel lines.
1|
© Moeller Marine Products, Inc.
© Scepter Corporation
Round and Oblong Sized
Live Wells (pg.34)
Constructed of one piece, seamless, heavy-duty
Polyethylene roto molded plastic in four convenient, efficient sizes. Each tank comes with
molded in deck fasteners for easy deck hold
down and include drain plugs for quick draining and cleaning. Lids are recessed but allow
for quick access. Ready to convert to bait well
application with plumbing accessory kit. One
Year Warranty. Available in White & Light Blue.
Boatbuilders have featured
Moeller’s molded polyethylene, double-wall insulated, swing back seats
in their boats for decades. Whether a
small skiff or a larger center console,
Moeller has a cooler/live well flip-flop
seat to fit many models of boats.
Moeller’s flat panel aluminum supports slide fore/aft and have
advantages over other
side pole configurations.
Features protection from corrosion
(internal and external to the fuel tank).
Standard with a SAE 5 hole mounting
bolt pattern. Construction head and support engineered grade thermo polymer.
• Temperature Range -40°F to 176°F,
-40°C to 85°C.
• Meets requirements of ISO 10088,
ABYC H-24, 33CFR 183.590 and ISO
8846.
When two of the largest suppliers to the recreational boating industry combine their
resources, you can expect the best from the very best.
Helm Seats..31
Water / Waste Tanks & Adapter Kits..33
Camo Seating (pg.30)
Reed Array
Sending Units
(pg.25)
NEW
PRODUCT
Motor Flushers (pg. 45)
Center Console
Topside Fuel Tanks (pg. 6)
Designed to fit under the Seat of Boston
Whaler®
Montauk® series boats and other
Easy to install in seconds for out of the
popular
center
console models. Constructed of
water engine flushing applications.
cross-link
polyethylene
with UV-stabilized resin.
Designed to fit Inboards, performance
Available
in
two
fuel
capacities, 22 gallons
ski boats and all boats with a tear drop
and
18
gallons.
BR
version tanks are
shaped slotted thru hull water intake!
manufactured
in
UV
stabilized
Red resin
Stainless Steel T fitting slides into the
and
are
designed
for
boats
manufactured
after
intake slot in either direction for a quick
2011
that
require
EPA
compliant
evaporative
fit.
New Product Designation Look for
emissions standards.
Flusher is supported with 360 degree
the New Product symbol. Throughout the catalog
• Exclusive PL3 360° swivel pick up design
plastic support ring insuring a tight fit to
all new products will be disignated with this new
the bottom of the boat. No more trying to • EPA compliant (BR) tanks include swing style
product symbol.
fuel sight gauge & EPA self-venting fuel cap
fit between the trailer bunks and secure
Made In North America a pole to the ground. A quick couple of • Non EPA tanks include Kelch fuel cap with
Many of our products are made in turns of the locking nut and the flusher is sight gauge with vented fuel cap (boats built
prior to 2011)
either America or Canada and are fully secure and ready to use.
• Will not rust, delaminate, or experience
designated with this symbol.
galvanic corrosion.
More than 40 New
Products throughout
the catalog
|2
USA
CDN / International
/ 08189
008189
•Engineered as a transom mounted marine
fuel tank.
•Patented design.
04156
04157
•Not approved for sale in USA.
•ISO & CSA certified.
Bow
0LP 6
62004
49LP
6200
781
1 / 03
00378
ller)
5 (Moe
P / 0936
620009L 8667 (Scepter)
/0
008667
/ 08190
008190
DinghyMate ™
•Manufactured from
lightweight, high
strength cross-linked
polyethylene for durable
performance.
03LP
6200
921
1 / 04
00492
158
8 / 04
00415
3780
80 / 0
0037
er)
7 (Moell
P / 0936
L
r)
3
te
1
0
p
0
e
3
6
(Sc
/ 08669
008669
/ 08191
008191
• Includes a
universal 1/4"
NPT fuel pick-up
adapter.
• Mechanical direct sight gauge with easy-to-read
indicator.
• Fulfills all your outboard engine needs.
•Approved for use worldwide.
•ISO & CSA certified.
oeller)
366 (M
LP / 09 (Scepter)
2
1
0
0
3
6
/ 08668
008668
OEM/Neptune
00857
6 / 08
576
00859
0 / 08
590 N
eptun
e
Dimensions
008580
/ 08580
The dimensions
logo helps identify what is considered length,
width, and
height throughout the catalog.
008592
/ 08592
Neptun
e
Manufacturer Identification
For ease of identification of items throughout the catalog, we have presented each companies part number by color. Moeller’s part numbers are in red
while Scepter’s part numbers are in blue.
Moeller
Part No.
Size inches
Size mm
Replacement
Pickup
Replacement
Cap
620003LP
3 Gal
16.75'L x 10.75'W x 8.00'H
621002-10
305994-10
620049LP
6 Gal
20.50'L x 12.75'W x 10.50'H
624002-10
305994-10
620040LP
6 Gal
19.50'L x 16'W,6.50W x 12.00'H
621003-10
305994-10
Scepter
Part No.
Capacity
Size inches
Size mm
620009LP
09365
9 Gal/34L
22.90'L x 14.30'W x 11.75'H
582mmL x 364mmW x 299mmH
009210
09210
009315
09315
004158
04158
3 Gal/11.4 L
16.75'L x 10.75'W x 8.00'H
009098
09098
008935
08935
630012LP
09366
12 Gal/45L
22.90'L x 14.30'W x 13.60'H
009221
09221
008935
08935
004921
04921
6 Gal/22.7L
20.50'L x 12.75'W x 10.50'H
009101
09101
008935
08935
630013LP
09367
12 Gal/45L
24.30'L x 18.10'W x 10.75'H
009209
09209
009315
09315
003780
03780
3.2 Gal/12L
14.25'L x 10.25'W x 9.00'H
008095
08095
008935
08935
008590
08590
3 Gal/11.4L
16.75'L x 10.75'W x 8.00'H
009098
09098
009315
09315
003781
03781
6.6 Gal/25L
21.25'L x 14.00'W x 9.75'H
008096
08096
008935
08935
008592
08592
6 Gal/22.7
20.50'L x 12.75'W x 10.50'H
009101
09101
009315
09315
008189
08189
9 Gal/34L
22.90'L x 14.30'W x11.75'H
009209
09209
008935
08935
008576
08576
3.2 Gal/12L
14.25'L x 10.50'W x 9.00H
008095
08095
009315
09315
008190
08190
12Gal/45L
22.90'L x 14.30'W x 13.60'H
009210
09210
008935
08935
008580
08580
6.6 Gal/25L
21.25'L x 14.00'W x 9.75'H
008096
08096
009315
09315
008191
08191
12Gal/45L
24.30'L x 18.10'W x 10.75'H
009221
09221
008935
08935
008667
08667
9 Gal/34L
22.90'L x 14.30'W x 11.75'H
009209
09209
009315
09315
004156
04156
3Gal/11.4L
23.00'L x 6.50'W x 12.75'H
009104
009104
008935
08935
008668
08668
12 Gal/45L
22.90'L x 14.3'W x 13.60'H
009210
09210
009315
09315
004157
04157
6 Gal/22.7L
26.00'L x 8.00'W x 14.75'H
009106
09106
008935
08935
008669
08669
12 Gal/45L
24.30'L x 18.10'W x 10.75'H
009221
09221
009315
09315
Replacement
Cap
Capacity
Moeller
Part No.
3|
Replacement
Pickup
Scepter
Part No.
(All dimensions shown are nominal)
|4
Replacement Parts
Part No.
Description
031001-10 09514 Gauge assembly for 3G (031103), 6G (031106), 9G (031109), 12G Low (031212)
Moeller
031004-10 09517 Gauge assembly for 12G High (031112)
031003-10 09516 Withdrawal assembly for 12G Low (031212)
031002-10 09515 Withdrawal assembly for 3G (031103), 6G (031106), 9G (031109)
031005-10 09518 Withdrawal assembly for 12G High (031112)
621001-10 09519
Gauge assembly for Ultra 3G (620003,620003LP), 6G (620049, 620049LP), 6 Bow
(620040LP), 9 Gas (630014LP), & LPT 12G (630013LP)
(Tempo by Moeller)
621007-10 09525 Withdrawal assembly for Ultra PBW 12 (630012, 630012LP)
Moeller
621006-10 09524 Gauge assembly for Ultra PBW 12G (630012, 630012LP)
621005-10 09523 Gasket and screws for mod plate
621002-10 09520 Withdrawal assembly for Ultra 3G (620003, 620003LP) & 6G (620049, 620049LP)
Fits Tank
Topside Fuel Tanks
We’ve revolutionized the marine industry standards for topside fuel tanks above 12
gallon capacity, providing engineering that looks and performs better than any other fuel
tanks available. Moeller and Scepter are your one source solution for innovative fuel tank
technology.
We’ve added our new barrier technology to the Low Perm certified topside tank options to meet
these new requirements. This new low perm technology is being used today by the marine industry’s leading boat builders.
Moeller’s topside tanks are manufactured with tough rotationally molded, cross-linked polyethylene plastic and are well suited to today’s highly corrosive ethanol fuels. Topside tanks are available in 6 different
fuel capacities and models that meet the needs of boats manufactured prior to 2011 as well as boats manufactured after 2011 requiring the new “BR” (barrier version) for low permeation standards....”BR” tank models
include an EPA complaint two way auto vented fuel cap and include a manual swing arm sight gauge. Add our
optional electric capsule ( Part No. 035760-10 shown on page 25 to the sight gauge and you can direct connect to
a fuel gauge on your dash. The pre-2011 topside tank options include the more traditional cap/sight gauge option without the “BR” technology..Tank capacities are
measured at the full fill line molded in the side of each tank.
621008-10 09520 Withdrawal assembly for Ultra 6 Bow (620040LP) & 9 Gas (630014LP)
26
0315
621009-10 09525 Withdrawal assembly for Ultra LPT 12G (630013LP)
Scepter
5|
009098
09098 Fuel pick-up elbow assembly for 11.4L / 3 Gallon Neptune
009101
09101 Fuel pick-up elbow assembly for 22.7L / 6 Gallon Neptune
009089
09089 Fuel pick-up elbow assembly for 12L / 3.2 Gallon Scepter
009092
09092 Fuel pick-up elbow assembly for 25L / 6.6 Gallon Scepter
009104
09104 Fuel pick-up elbow assembly for 11.4L / 3 gallon DinghyMate
009107
09107 Fuel pick-up elbow assembly for 22.7L / 6 gallon DinghyMate
009209
09209 Fuel pick-up assy for 34L / 9 Gallon Scepter / Moeller tanks (08189 / 08867 / 09365)
009210
09210 Fuel pick-up assy for 45L / 12 Gallon Low Scepter / Moeller tanks (08191 / 08868 / 09367)
009221
09221 Fuel pick-up assy for 45L / 12 Gallon Tall Scepter / Moeller tanks (08190 / 08869 / 09366)
008095
08095 Fuel pick-up/gauge manifold assembly for 12L / 3.2 Gallon Scepter OEM Select
008096
08096 Fuel pick-up/gauge manifold assembly for 25L / 6.6 Gallon Scepter OEM Select
009067
09067 pick-up / gauge manifold assemblies
009315
09315 Scepter EPA cap with tether
008935
08935 Scepter manual vent cap (non - EPA product)
Scepter fuel pick-up kit (flange gasket, 4 screws & 4 washers) for all Scepter fuel
009036
09036 Scepter portable tank fuel removal spout
009086
09086
Cap gasket for all Scepter marine tanks - display
Topside Tank
Hold Down Kit
BR
526
031
621501-10 09526 Moeller/Tempo manual vent fuel cap (pre-2011)
305994-10 09876 EPA approved moeller fuel cap (2011)
103
/ 07
R
03B
1
/ 07
Part No.
Description
035711-1007148 Hold Down Kit for Topside Fuel Tank & Battery Box
(72” length) (Kit includes two (2) universal nylon straps with
quick-release buckle, four (4) stainless steel hold down
brackets & mounting screws.
Center Console & Boston Whaler® Topside Tanks
• Two new models to choose from, 18 gallon and 22 gallon capacity.
• Manufactured with cross-linked polyethylene plastic, will not delaminate, rust
or promote galvanic corrosion.
• Specifically designed for use in Boston Whaler® Montauk® 15’ and 17’
center consoles and other popular makes and models.
• Exclusive PL3 pickup design with 360° swivel.
• Also includes 305194 - 12.25” Kelch fuel cap with sight gauge and vent.
• Pre-2011 models includes 305194 - 12.25" Kelch Fuel Cap with sight gauge and
vent, Post-2011 models includes our new EPA self-venting fuel cap (305994-10)
and separate fuel sender/sight gauge.
• Pre-2011 tanks are made with white cross-linked polyethylene, Post 2011 models
include our Low Perm Certified “BR” barrier and are manufactured with red
cross-linknd polyethylene plastic.
031527BR / 10086
031527 / 10085
For boats built
before 2011
For boats built after 2011
requiring EPA Compliance
Moeller
Part No.
Scepter
Part No.
Moeller
Part No.
Scepter
Part No.
Capacity
Size inches
031615
07100
031615BR
07100BR
14 Gal/53L
43.00'L x 15.00'W 6.88'H
031818
07101
031818BR
07101BR
15 Gal/57L
42.50'L x 14.75'W 7.63'H
031620
07102
031620BR
07102BR
18 Gal/68L
28.00'L x 15.00'W 12.37'H
031527
10085
031527BR
10085
18 Gal/68L
43.00'L x 15.00'W 5.88'H
031626
08679
031626BR
08679BR
22 Gal/83L
29.25'L x 20.50'W 12.25'H
031526
07103
031526BR
07103BR
24 Gal/91L
29.25'L x 19.00'W 12.25'H
Products subject to change without notice.
Size mm
|6
Keep your fuel lines operating at peak performance to insure your outboard
motor runs smoothly. Moeller offers a wide variety of OEM compatible
replacement assemblies that promotes maximum fuel flow!
• Assemblies use a compounded, tough &
pliable UV-resistant hose.
• Includes fittings built to OEM specifications
for replacement parts.
Tank
Part No.
International Part No. / Description
034385-10LPA 08309
007482 07482
Tank Fitting
(Not included)
033477-10 / 05837
ts to
c
e
n
Con
793
ne
Engi
o
t
ects
Conn 3482-10 / 05791
03
Engine
On
(This is part
of your engine)
™
Actual motor connector on
your engine will look different
95
/ 074
8-10
1
0334
Maximum
Flow for Improved
Engine Performance
5
0/0
86-1
0334
3/8" I.D. Hose, Clip Style Fuel Line Assembly;
1998 & Newer Engines
1997 & Older Build Your Own: Select a 3/8" universal fuel
line assembly and connect to tank with 033481-10 / 05815
and connect to engine with 033418-10 / 09476
034388-10LPA 08310
007483 07483
™
033418-10 / 09476
7
749
0/0
21-1
0334
5822
0/0
0-1
3348
0
™
Moeller Primer Bulbs feature gasoline and
solvent-resistant construction, stainless steel
clamps, and dual internal check valves to ensure a
more rapid prime while preventing fuel flow back.
™
034590-10LP
034690-10LP
034790-10LP
3/8" I.D. Hose, Bayonet Style
Fuel Line Assembly;
Cast Aluminum Fittings
10 /
810334
034391-10LPA 08313
22
80
0334
033400-10 / 04068
Description
Primer Bulb with 3/8" Hose Barbs
/ 058
-10
007486 07486
5
0581
CDN/INT’L Part #
005869
05869
007494
07494
007813
07813
3/8" I.D. Hose, Fuel Line Assembly
l
ersa
Univ
Universal
Fit End:
Customize your fuel line
assembly to match the
existing connector on
your engine end!
™
007489 07489
033470-10 / 04075
• Fuel line hose for fuel system rigging
3/8" I.D. Hose, Fuel Line Assembly
l
ersa
Univ
Universal
Fit End:
Customize your fuel
line assembly to match
the existing connector
on your engine end!
• Sold in a 100' (30.5 meter) reel box.
• Designed to be used above the deck.
• B1 hose designed for above deck applications.
• Type A-1 hose=fire retardant
™
034386-10LPA 10140
5827
0/0
98-1
009478 09478
033496-10 / 05829
0334
034375LP
034313LP
034376LP
034314LP
3/8" I.D. Hose, Fuel Line Assembly c/w Tank
Fitting for Model Y91+
034390-10LPA08312
033389-10LPA
034395-10LPA
034387-10LPA
08311
08318
10084
007485
007484
007491
n/a
07485
07484
07491
n/a
3/8" I.D. Hose, 80" (203cm) long, B1-15
3/8" I.D. Hose, 12' (3.66m) long, B1-15
5/16" I.D. Hose, 80" (203cm) long, B1-15
3/8” I.D. Hose, 12’ (3.66m) long , *A1-15
08319
08320
08331
10083
CDN/INT’L Part # Description
007492 07492 3/8" I.D. Bulk Fuel Line (B1-15)
007493 07493 5/16" I.D. Bulk Fuel Line (B1-15)
008355 08355
1/4" I.D. Bulk Fuel Line (B1-15)
n/a n/a
3/8” I.D. Bulk Fuel Line (A1-15)
l
ersa
Universal Fit End:
Customize your fuel line
assembly to match the
existing connector on
your fuel tank!
Univ
*Type A-1 hose=fire retardant
•Uses o-ring construction on all fittings
for tight, leak-free connections.
•Clamshell packaging is consumer
accepted with self-selling graphics!
KolorKeyed Engine Manufacture
When the KolorKeyed logo is present on catalog pages, it signifies that the package graphics are designed for easy manufacture identification. The colors represented within the KolorKeyed logo corresponds to the color on the package. This helps the customer identify the correct part at the retail level.
The braided hose in photos has been altered for better viewing, it is
18-1/2" (470mm) long on tank end & 55 1/2" (1410mm) long on the motor end.
Part No.
Description
03432010141 50’ roll of 1 1/2” ID Fuel Fill
Hose
03433010142 100’ roll of 5/8” ID Vent Hose
034394-10LPA 08316
5815
0/0
81-1
0334
roducts subject to change without notice.
P
Next Page
76 |
|8
Fuel Line Connectors
Package Icons
Allow Quick Connector
Type Identification
3/8"
033410-10 05787
033480-10 05822
5/16"
0334
T
/4 NP
1
033482-10 05791
09476
10
8
1
4
3
03
o kit
comb
lbow
0
9 °E
with
0
477-1
033
05837
combo kit
with 90° Elbow
wer
& Ne
1998e Engines
Styl
1998
05793
-10
6
8
4
3
03
&
s
ngine
tyle E
rS
Newe
033464-10 05800
1998 & Newer Style
Engines
™
Front
Profile
033484-10 05799
5/16"
0334
61-10
05
801
3/8"
033467-10 05781
033487-10 05785
0335
03-10
3/8"
5/16"
033497-10 05783
033488-10 05779
0
502-1
033
-10
33501
0
0
498-1
96-10
0334
05829
33
r 0
Newees
&
1
199 e Engin
Styl
05827
1
N
991 &
ines
2001 & Newer Style Engines
e Eng
Styl
ewer
033481-10 05815
5/16"
515002-1008024
033451-10 05810
3/8"
3/8"
70-10
04
075
™
Front
Profile
033492-10 05809
9|
04
065
0334
3/8"
Front
Profile
Teflon ® Tape
63-10
04
070
Front
Profile
033471-10 05813
™
0334
3/8"
3/8"
05784
PT
1997 & Older: Use
033481-10 / 05815 (Yamaha)
for engine connector.
3/8"
05778
1/4 N
0334
50-10
05
811
0334
91-10
07
372
3/8"
497
07
21-10
00-10
04
068
3/8"
Front
Profile
033418-10 09476
0334
| 10
Protect Your Investment with Moeller Filters.
™
Corrosion Protection Options:
Moeller’s innovation for fuel system design helps you protect
your two- and four-stroke engines from dirt and water contaminates.
Standard
Inboard Engines
Best Value!
Fuel Water Seperator/filters
Moeller’s Clear View In-line
Fuel Filters trap dirt and other
metallic particles. The design
allows for immediate inspection of
your fuel condition with clear vial.
Universal kit includes 1/4", 5/16"
and 3/8" O.D. barbs.
• 20 Micron Filtration!
• Not for use on
inboard engines!
Water Separating
Marine Fuel Filters
Composite
Powder Coated Aluminum
For use with inboard
& outboard engines!
Clear Site with Hydro-Shield™ offers the ultimate protection against water & other
contaminates and extends the life of the filter by draining collected water from the fuel
system. This provides cleaner fuel critical for today’s engines to operate at peak performance!
Features
•85 gallons per hour flo-rate at 3"
of mercury.
•Provides cleaner fuel for today’s
engines to operate.
UV Protected Resin Drainage Bowl
with Easy Turn Thumb Screw
High Performance 3/8 NPT Ports
Lower vacuum pressure drop rates
Will Not Separate 2-Cycle
Oil from Gasoline
10 Micron Filtration
•85 gallons per hour flo-rate at 3"
of mercury.
•UV protected aluminum bowl meets
industry fire test requirements.
3
3
3
3
3
�
�
(Filter Head & Water Collecting
Bowl are Reusable)
Part No.
Filter Head Part No.
Filter Head
033314-1007823
Composite 033339-1007825 Powder Coated
033328-1007800 Powder Coated Aluminum
Aluminum
Filter & Bowl Kit
Complete Kits
Includes filter head, filter, water
collecting bowl,
barbs & plugs
(Water Collecting Bowl is Reusable)
Includes filter & water
collecting bowl, comes with Viton
O-Ring
Replacement Filter Available
Replace filter every 50 hours,
comes with Viton O-Ring
art No.
Replacement
Part No.
Replacement P
033329-10 07811 Filter
& Bowl
033340-10 07824 Filter & Bowl
03333609544 Bowl
033337
08022 Bowl
Part No.
033315-1007812
• Outboard engine use only.
• Not for use with diesel fuel.
11 |
Part No.
033315-1007812
• Not for use with diesel fuel.
3
�
3
Includes 2 universal water separating fuel
filters, 1 composite filter head with 3/8
NPT hi-flow ports, barbs
033322-1007112
and plugs.
In-Line Fuel Filters
Moeller’s In-line Disposable fuel filters
trap dirt and other metallic particles.
The design allows for
immediate inspection of your fuel condition with clear vial.
• 10 Micron Filtration!
• Not for use on
inboard engines!
Part No.
Description
033318-1007108 Clear View In-line
Fuel Filter Replacement 3 Pack
033319-1007109 Universal In-line Clear View
Fuel Filter with 3/8", 5/16",
& 1/4" Barbs in Kit
New Fuel Filters NEW
PRODUCT
• 10 Micron
Filtration!
• Not for use on
inboard engines!
• Disposable In-line fuel filters.
• Three barb sizes to choose
from.
• Replaces Mercury
35-16494, 35-816296T,
35-816296.
Water Separating Fuel Filter Kits
(Filter Head is Reusable)
Includes filter head, filter, barbs & plugs
Part No.
Filter Head
033320-1007110 Powder Coated
Aluminum
Replacement Water Separating Fuel
Filters (Replace filter every 50 hours)
Part No.
Application
033323-1007113 Long - Universal
& Mercury
033324-1007114 Short - Universal,
Yamaha & Mercury
033325-1007115 OMC
(Johnson Evinrude)
•Not recommended for use
with diesel engines.
Part No.
033317-1007480
033316-1007481
Description
Disposable In-line Fuel
Filter with 3/8" Barb
Part No.
033350-1010143
033351-1010144
033352-10 10145
™
•Water separating
canisters ensure
no other contaminates
or rust will contribute to
a blocked fuel system.
•Trap the smallest particles and
emulsified water from gasoline.
•Designed for Mercury, BRP (Johnson
& Evinrude), Yamaha, Suzuki, Honda,
Tohatsu and Nissan engines.
Universal application as well.
•Not recommended for use with electric
fuel pumps using in-line fuel filters.
Bonus
Pack Available!
Description
| 12
Fuel Transfer Products
006792
06792
EPA / CARB
approved models
Part #
006792 06792
006932 06932
008341 08341
008338 08338
Description
Duramax
Replacement Hose
MaxFlo Combo
MaxFlo Pump Only
The Duramax fluid transfer siphon pump and patented
Flo n’ Go hand pump provide the only re-filling and fluid
transfer system you’ll ever need. With environmentally
responsible features, we’ve stopped accidental spills
and overfilling, providing safer transfer for you and the
ecosystem.
• Composed of a durable, high-density polyethylene in
vibrant red for use with gasoline, diesel, or kerosene
fuels.
• Comes complete with a patented Flo n’ Go
hand pump & pump holder handle.
• Internal spiral support prevents kinking.
• 14 gallon (53 litre) volume capacity
and a 10' (305cm) long fuel hose.
• Includes a bolt on hanger for
convenient hose storage.
• Quickly refuels, using a UN approved,
manually vented fill cap.
• Fluid transfer on level surfaces with minimal priming.
• Sturdy, 6 inch (152mm) wheels, makes
maneuverability a breeze over rough terrains.
• Ergonomically designed, heavy-duty top handle
with extra deep base unit handholds for transport.
• Recessed grooves provide nuisance free
strapping locations for safer transport.
• Dual mechanical shut-off valves, at both tank and
hose, for spill-proof Flo n’ Go disconnection.
• Meets D.O.T. & UN transportation requirements.
Includes
6.6 Gallon
(25 Litre)
AB Series
Jerry Can
13 |
006922
06922
Flo n’ go is Perfect for:
•Boat Engines
•Jetski’s
•Personal Watercraft
•Lawntractors
•Farm Equipment
•ATV’s / Dirt Bikes
• Lawn Mowers
• Trimmers
• Chainsaws
• Generators
• Blowers
• Edgers
…and much more!
008266
08266
Combo Kit
CDN / Int.
008338
08338
US
EPA
Compliant
Includes 5.0
Gallon AB Series
Jerry Can
008341
08341
•International
use/sale only.
•Included rubber cones fit most neck openings.
•Rubber cone design doesn’t rely on US neck finish sizes.
•Same features as maxflo listed above, does not include
safety shut-off valve.
| 14
USA
Canadian / International
Scepter Continues to Set the Standard for Jerry Cans
Always the leader in portable fuel can technology, Scepter developed the original plastic
Jerry Can and changed the industry forever. For almost half a century Scepter has continued
to set the standard with evolving product features that are breaking new ground in away-fromthe-pump fuel transport and transfer like our new Child Resistant Closures (CRC’s) available on our
full line. All of our Jerry Cans feature an extra Large, durable, molded-in handle that provides superior
comfort, pouring and carrying ability. Scepter is your single source solution for Jerry Cans.
EPA Approved Spill Proof CARB Fueling Systems
• Ecologically friendly, the Scepter line of “ECO” spill proof
Jerry Cans are the safest products available and provide
100% compliance with California’s Air Resource Board
(CARB) emission and spill control regulations.
• Feature CRC’s and a patented automatic shut-off
spout that stops overflows, closes automatically and
self-seals to guard against unwanted vapor emissions when not in use.
The Evolution of the “Original” Self Venting Fueling Systems
• Scepter Jerry Cans are virtually indestructible, manufactured from
high-density, unbreakable polyethylene that is rustproof,
crush-resistant and non-corroding.
007624/ 07624
• Features a reversible self-venting spout –
CRC Closure
no need to worry about separate vent closures.
• Scepter manufactures the only complete line
available for gasoline, diesel, kerosene and water
in a wide variety of sizes.
• All sizes easily attach to the patented
Flo n‘ Go™ hand pump.
• "Available with UN, CSA and 003609
/ 03609
Standards Australia
Approvals"
003711 / 03711
005086 / 05086
005090 / 05090
004933 / 04933
005092 / 05092
004933 / 04933
005898 / 05898
NEW
PRODUCT
007539 / 07539
Military Use Jerry Can
•UN approved.
•Flouro-elastomer.
gasket doesn’t swell.
•Used by most
NATO countries. •Can be used with
blended fuels.
•Fits standard
military bracket.
00003 / 0003
(*Available after 1/1/2014)
007624/ 07624
Moeller Part
No.
007649/ 07649
Scepter
Part No.
00002 / 0002
Spill Proof Spout
00001 / 0001
Desc.
• Stops overflows, closes automatically and
self-seals to guard against unwanted vapor
emissions when not in use.
• Ecologically friendly.
• Automatic shut off.
007450
07450
1.25 Gallon/5L CARB Jerry Can with CRC
Desc.
007378
07378
2.5 Gallon/10L CARB Jerry Can with CRC
07081
5L/1.25 Gallon Self Venting Jerry Can
005096
05096
5 Gallon/18.8L CARB Jerry Can with CRC
007079
07079
*000001
*00001
1 Gallon/4L CARB Jerry Can
007622
07622
*00002
2 Gallon/8L CARB Jerry Can with CRC
07539
25L/6.6 Gallon Self Venting Jerry Can (Photo represents above tanks)
Replacement Parts
*000002
007539
*000003
*00003
007649
07649
20L/5.3 Gallon Diesel Self Venting Jerry Can (Yellow)
Parts Kit
*000004
*00004
007624
07624
20L/5.3 Gallon Self Venting Kerosene Jerry Can (Blue)
*000005
*00005
5 Gallon/18.8L CARB Kerosene Jerry Can with CRC
003609
03609
20L/5.3 Gallon Manual Venting Military Style Gas Can
004933
04933
5.3 Gallon/20L Military Style Water Can
003711
03711
20L/5.3 Gallon Manual Venting Military Style Diesel Can
005898
05898
5 Gallon/18.8L CARB Diesel Jerry Can with CRC (Yellow)
004933
04933
20L/5.3 Gallon Military Style Water Can
005092
05092
5 Gallon/18.8L CARB Kerosene Jerry Can with CRC (Blue)
005552
05552
5 Gallon (18.9L) Military Jerry Can (This product can not be sold in the continental US according to CARB /EPA regulations.)
005086
05086
5.3 Gallon/20L CARB Military Style Gas Can with CRC
003583
03583
Replacement Parts Kit (3 pieces) w/out Flixible Spout
005090
05090
5.3 Gallon/20L CARB Military Style Diesel Can with CRC
003647
03647
Replacement Parts Kit (4 pieces) with Flixible Spout
005459
05459
Patented Spill Proof Spout
Moeller
Part No.
Scepter
Part No.
007081
15 |
Flexible Spout
CRC Closure
| 16
|
Dock Cart & Accessories
Gas Walker
GW14
GW29 KW29 DW29
Moeller
Part No.
Scepter
Part No.
730025
08413
730014
Desc.
Same Great Fuel Transport
Available NOW!
Drip Tray NEW
PRODUCT
Outboard Motor Lock NEW
PRODUCT
•
•
•
•
•
•
•
•
•
•
•
•
• Tough, rugged HDPE.
• Catches oil / fluids under any engine or lower unit.
• Prevents spills onto the ground.
• Ideal tray for wet gear.
• Dimensions: 37.5” x 25.0” / 95cm x 64cm.
• Perfect for smaller motors.
• Eliminate access to outboard theft.
• Durable brass lock and hardened steel bracket.
• Vinyl covered for maximum corrosion resistance.
Part No.
Description
00695106951
Drip Tray
Part No.
Description
04290310114
Outboard Motor Lock
Heavy Duty Dock Cart NEW
PRODUCT
Spare Tire Carrier NEW
PRODUCT
3.5 gallons (13.25 L) per
minute (average flow rate).
Durable cross-linked
polyethylene with UV
inhibitors construction.
Built-in handle makes
maneuvering a fully loaded
Gas Walker to the doc easy!
Brass shut-off valve safely
controls fuel flow.
Locking plate prevents accidental discharge or theft of fuel.
Manually vented fuel cap has easy-to-grip ribs.
Molded-in hose storage compartment helps keep your
storage area neat and safe.
Electric static discharge grounding wire is included.
Safe for use with gasoline, diesel & kerosene - Do Not Mix!
Meets US requirements for
transporting gasoline.
The GW-29 Gas Walker Comes
with a 10' fuel hose
assembly, the GW-14 Gas
Walker comes with a 6' fuel
hose assembly.
Certified DOT and UN as
"special container".
Empty
Full
Capacity
GW29 Gas
44lb/20kg
223lb/101kg
08448
GW14 Gas
22lb/10kg
730026
09084
DW29 Gas
730027
09085
KW29 Kerosene
035771
09545
Digital Flow Meter (Gallons)
035772
09601
Digital Flow Meter (Liters)
730001-10
09257
Bung Adapter for Gas Walker
730002-10
09528
Butress Plug for GAs Walker
730003-10
09529
Gas Walker hose strap
730090
08427
Rotary Hand Pump
731005
09616
Hose Nozzle Kit for GW14
731006
09617
Hose Nozzle Kit for GW29
731005
Size inches
Size mm
29Gal/110L
19.5'L x 19W 43.25'H
109lb/49kg
14Gal/53L
16'L x 19'W 35'H
44lb/20kg
223lb/101kg
29Gal/110L
19.5'L x 19W 43.25'H
44lb/20kg
223lb/101kg
29Gal/110L
19.5'L x 19W 43.25'H
Accessories/Replacement Parts
730003-10
730001-10 730002-10
035771
Easily transport all your boating accessories from
the car to the boat! Sealed wheel bearings will
provide years of no maintenance use! Curved
handle bar provides effortless maneuverability and
is removable for storage. Capacity 300 lbs.
• Inside dimensions: 25"W x 18"D x 43"L
• 20" solid rubber tires and composite rims are
non-corrosive.
• 11.2 cubic feet of capacity to top of rim.
• Easily tilted to remove materials from inside the bin. • Heavy duty spare tire carrier for under belly spare
tire mounts.
• Easily cleaned with soap and water.
•
Two
piece construction.
• Comes complete with drain plug.
• Fits tire size R215 and smaller
• Heavy duty locking hasps.
• Helps to keep road debris and sunlight off of
tire to help the tire stay fresh longer.
Part No.
Description
03337010108
Spare Tire Cover Assembly
• Non-corrosive
• Ergonomic design
17 |
• 10” pneumatic tires
• Eases maneuvering
• Rolls smoothly even when
completely filled!
• Large handle is easy to
grip when maneuvering
• Extremely tough construction
• For when pumping location
isn’t suitable for gravity feed
• Part No. 730090
Part No.
Description
04313009914
Dock Cart
| 18
Permanent Tanks
Visit moellermarine.com for detailed downloadable pdf drawings!
Below-Deck Technology with
Moeller’s Above-&-Beyond Innovation
Unlike aluminum tanks, this comprehensive line of cross-linked polyethylene models is a
distinctive Moeller innovation: featuring ethanol and biodiesel compliant corrosion / pit
resistance and exclusive Moeller Tite™ pioneering. Each tank is complete with molded fill neck
and withdrawal/vent fittings molded directly into the shell.
Moeller is your single source for the ultimate in below-deck technology.
• Utilizes rotationally molded, cross-linked polyethylene plastic, allowing for complex
shape designs beyond conventional and restricted aluminum tanks.
• Our fittings meet E15 requirements, hold the highest O.D. and I.D. tolerances
in the industry, and allow quality connections with rigid low perm hoses.
• Machined aluminum 3/8" withdraw fitting has 360° Swivel
Poplock capability for hook-up convenience.
• Ideally suited for gasoline and diesel
use with appropriate return kit
(035724-10 / 07153).
• Convenient hold down
grooves molded directly into
select tank shells work great
with Moeller’s Permanent
Fuel Tank Hold Down Kit
(035710 / 07147).
• Conforms to all ABYC,
NMMA and U.S.C.G. Coast
Guard regulations.
• All aftermarket parts
have CE certification.
•Exclusive barrier
technology is available on
every Moeller permanent tank
that meets CARB and EPA
requirements. Ask Us How!
Add 2-1/8" (54mm) to tank height
dimension to accommodate fill
height. Helpful Hint: You may have
more area above your fill than the
rest of your tank, this will allow you
to have a larger tank!
19 |
Hold Down Kit
Part No.Description
035710 Permanent Fuel Tank
Hold Down Kit
07147
(Four Brackets Per Kit)
032612 / 07117
032512 / 07116
032513 / 07118
032514 / 07115
032718 / 07124
032518 / 07121
032515 / 07120
032618 / 07123
032819 / 07122
Moeller
Part No.
Scepter
Part No.
Desc.
Cap.
Size inches
Size mm
032512
07116
12 Gal
12 Gal/45L
24.50"L x 18.50"W 7.25"H
032612
07117
12 Gal
12 Gal/45L
032513
07118
13 Gal
032514
07119
032515
032519 / 07126
Bracket
Tie Down
Diesel
Return
# Fuel
Pickups
622mmL x 470mmW x
184mmH
035710/
07147 or
300110
no
1
Rochester
"Swing Arm"
no
20"L x 14"W 11.75"H
508mmL x 356mmW x
299mmH
035710/
07147 or
300110/
09542
no
1
Rochester
"Swing Arm"
no
13 Gal/49L
32"L x 10.19"W 10.19"H
813mmL x 259mmW x
259mmH
300110
no
1
Rochester
"Swing Arm"
no
14 Gal
14 Gal/53L
18"L x 11.75"W 16.25"H
457mmL x 299mmW x
413mmH
300110
no
1
Rochester
"Swing Arm"
no
07120
15 Gal
15 Gal/57L
18.50"L x 17.75"W 12.50"H
470mmL x 451mmW x
318mmH
035710/
07147 or
300110/
09542
no
1
Rochester
"Swing Arm"
no
032518
07121
17 Gal
17 Gal/65L
36.50"L x 18.25"W 7.25"H
927mmL x 464mmW x
184mmH
035710/
07147 or
300110/
09542
no
1
Rochester
"Swing Arm"
no
032618
07123
Port Side
Withdraw
19Gal/72L
39"L x 8.25"W(T) x 5.25"W(B)
x 17.75"H
991mmL x 210mmW(T) x
133mmW(B) x 451mmH
300110
no
1
Rochester
"Swing Arm"
no
032718
07124
Starboard
Side
Withdraw
19Gal/72L
39"L x 8.25"W(T) x 5.25"W(B)
x 17.75"H
991mmL x 210mmL(F) x
133mmW x451mmH
300110
no
1
Rochester
"Swing Arm"
no
032819
07122
19 Gal
19Gal/72L
32"L(R) x 18"L(F) x 20.75"W x
9.56"H
813mmL(R) x 457mmL(F) x
527mmW x243mmH
035710/
07147
no
1
Rochester
"Swing Arm"
no
032519
07126
19 Gal
19Gal/72L
26.00"L x 16.00"W 11.75"H
660mmL x 406mmW x
299mmH
035710/
07147 or
300110/
09542
no
1
Rochester
"Swing Arm"
no
Sender
Belly
Tank
| 20
Permanent Fuel Tanks
032627 / 07136
032619 / 07127
032719 / 07128
032818 / 07125
032631 / 07143
032522 / 07130
032623 / 07134
032524 / 07131
032534 / 07141
032629 / 07139
032535 / 07142
032624 / 07132
032525 / 07133
032527 / 07135
032640-1 / 07762
032640 / 07144
032537 / 07145
Bracket
Tie
Down
Diesel
Return
# Fuel
Pickups
Moeller
Part No.
Scepter
Part No.
Desc.
Cap.
Size inches
Size mm
no
032627
07136
27 Gal
27 Gal/102L
36"L x 11.81"W 16.28"H
300110/
09542
no
1
Rochester
"Swing Arm"
no
Rochester
"Swing Arm"
no
032528
07137
27 Gal
27 Gal/102L
49"L x 24.50"W 7.88"H
Custom
unless
000210-4
no
1
Rochester
"Swing Arm"
yes
1
Rochester
"Swing Arm"
no
032529
07140
29 Gal
29 Gal/110L
43"L x 25.75"W 8.00"H
Custom
unless
000210-4
no
1
Rochester
"Swing Arm"
yes
no
1
Rochester
"Swing Arm"
no
032629
07139
29 Gal
29 Gal/110L
23"L x 18.75"W 16.50"H
035710/
07147
no
1
Rochester
"Swing Arm"
no
035710/
07147
no
1
Rochester
"Swing Arm"
no
032631
07143
30 Gal
30 Gal/114L
32"L x 17.50"W x 14.00"H
035710/
07147
no
1
Rochester
"Swing Arm"
no
Custom
no
1
Rochester
"Swing Arm"
no
032534
07141
32 Gal
32Gal/122L
59.84"L x 25.34"W x 7.38"H
Custom
unless
000210-4
no
1
Rochester
"Swing Arm"
yes
51"L x 8.75"W(T) x
5.00"W(B) x 17.88"H
1295mmL x 610mmL(F) x 127mmW
x454mmH
300110/
09542
no
1
Rochester
"Swing Arm"
no
032535
07142
35 Gal
35Gal/132L
69.50"L x 16"W x 8"H
300110/
09542
no
1
Rochester
"Swing Arm"
no
24Gal/91L
51"L x 8.75"W(T) x
5.00"W(B) x 17.88"H
1295mmL x 610mmL(F) x 127mmW
x454mmH
300110/
09542
no
1
Rochester
"Swing Arm"
no
032537
07145
35 Gal
35Gal/133L
26"L x 20.50"W x 17.50"H
035710/
07147
no
1
Rochester
"Swing Arm"
no
25 Gal
25Gal/95L
47"L(R) x 18.03"L x 7.50"H
1194mmL x 458mmW x191mmH
300110/
09542
no
1
Rochester
"Swing Arm"
no
032640
07144
40 Gal
40Gal/151L
26"L x 20.50"W x 18.50"H
035710/
07147
no
1
Rochester
"Swing Arm"
no
27 Gal
27Gal/102L
36.50"L x 16.00"W
11.75"H
035710/
07147 or
300110/
09542
optional
see note
1
Rochester
"Swing Arm"
no
032640-1
07762
40 Gal
40Gal/151L
26"L x 20.50"W 18.50"H
035710/
07147
no
1
Reed Style
no
Moeller
Part No.
Scepter
Part No.
Desc.
Cap.
Size inches
Size mm
032619
07127
19 Gal
19 Gal/72L
18.50"L x 14"W 18"H
032719
07128
19 Gal
19 Gal/72L
032818
07125
20 Gal
032520
07129
032522
Bracket
Tie Down
Diesel
Return
# Fuel
Pickups
300110/
09542
no
1
Rochester
"Swing Arm"
47"L x 10.25"W 10.19"H
Custom or
300110/
09542
no
1
20 Gal/76L
58"L x 6"W 14.75"H
300110/
09542
no
20 Gal
20 Gal/76L
26"L x 11.75"W 16.25"H
300110/
09542
07130
22 Gal
22 Gal/83L
22"L x 15"W x 17.00"H
032623
07134
23 Gal
23Gal/87L
24"L x 20"W x 12"H
032624
07132
Starboard
Side
Withdraw
24Gal/91L
032524
07131
Port
Side
Withdraw
032525
07133
032527
07135
21 |
032529 / 07140
032528 / 07137
032520 / 07129
Sender
Belly
Tank
* can be added(extra 3/8" NPT insert with plug)
Sender
Belly
Tank
| 22
Permanent Fuel Tanks
032540 / 08146
032552 / 08143
032550 / 07146
032555 / 07688
032585 / 09079
032580 / 09078
032555-1 / 07526
032558 / 07527
032560 / 09074
032599 / 09082
032590 / 09080
032699 / 09083
032690/ 09082
032111/ 09071
032564 / 09075
032576 / 09077
032570 / 09076
032150/ 09073
032126/ 09072
Some tank images are
computer renderings of the
tank and not the actual photo
of the tank.
Moeller
Part No.
Scepter
Part No.
Desc.
Cap.
Size inches
Size mm
032540
08146
39 Gal
39 Gal/148L
51.75"L x 28"W 8.25"H
032550
07146
50 Gal
50 Gal/189L
032552
08143
52 Gal
52 Gal/193L
Moeller
Part No.
Scepter
Part No.
Desc.
Cap.
Size inches
Size mm
Bracket
Tie Down
yes
032580
09078
80 Gal
80 Gal/91L
66.93"L x 26.77"W 12.60"H
Rochester
"Swing Arm"
no
032585
09079
85 Gal
85 Gal/322L
53.63"L x 34.75"W 13.75"H
1
Rochester
"Swing Arm"
yes
032590
09080
90 Gal
90 Gal/341L
57.50"L x 30.75"W 14.56"H
Optional
see note
*1
Rochester
"Swing Arm"
yes
032690
09082
90 Gal
90 Gal/341L
Bracket
Tie Down
Diesel
Return
# Fuel
Pickups
000220-1
(Large L
Bracket
comes with
tank)
no
1
Rochester
"Swing Arm"
45"L x 12.50"W 22.00"H
300110/
09542
no
1
60"L x 24"W 10"H
Custom
no
Sender
Belly
Tank
Diesel
Return
# Fuel
Pickups
Custom
Optional
see note
Custom
77"L x 31"W 10"H
Sender
Belly
Tank
2
Reed style
yes
yes
1
Rochester
"Swing
Arm"
yes
Custom
Optional
see note
*1
Reed style
yes
000220-1
(Large L
Bracket
comes with
tank)
Optional
see note
*1
Reed style
yes
032555
07688
55 Gal
55 Gal/208L
51"L x 25.50"W 12.50"H
Custom
unless
000210-4 or
000210-6
032555-1
07526
55 Gal
55 Gal/208L
51"L x 25.50"W 12.50"H
Custom
unless
000210-4 or
000210-6
Optional
see note
*1
Reed Style
yes
032599
09082
99 Gal
99 Gal/375L
69"L x 23.56"W 16.63"H
Custom
no
2
Reed style
no
032558
07527
58 Gal
58Gal/220L
44"L x 21.50"W x 15.75"H
Custom
no
1
Rochester
"Swing Arm"
no
032699
09083
99 Gal
99Gal/375L
56"L x 29.75"W x 15.50"H
Custom
no
1
Reed style
yes
032560
09074
60 Gal
60Gal/227L
62"L x 24.50"W x 11.25"H
Custom
unless
000210-4
no
2
Rochester
"Swing Arm""
yes
032111
09071
111 Gal
111Gal/420L
75"L x 24"W x 16"H
Custom
yes
1
Reed style
yes
032564
09075
64 Gal
64Gal/242L
45.83"L x 27.89"W x 13.82"H
Custom
unless
000210-4
no
1
Rochester
"Swing Arm"
yes
032126
09072
126 Gal
126Gal/477L
54"L x 32"W x 19"H
Custom
yes
1
Reed style
no
032570
09076
70 Gal
70Gal/265L
50.50"L x 24.74"W x 16.14"H
1283mmL x 629mmW x410mmH
Custom
Optional
see note
*1
Reed Style
yes
032150
09073
150 Gal
150Gal/568L
66.69"L x 33.44"W x 17.63"H
Custom
unless
000210-4
no
2
Reed style
w/Deutsch
connectors
yes
032576
09077
76 Gal
76Gal/299L
48"L x 27.75"W 15.50"H
Custom
unless
000210-4
23 |
no
1
Reed Style
yes
| 24
Senders & Gauges
Mechanical
Electric
Universal Gas/Diesel
Reed Array
Fuel Accessories
Reed Switch
Permanent Tank Fuel
Installation Kit
Topside Tank Hold
Down Kit
NEW
PRODUCT
Swingarm Mechanical Sending Units
with a direct site gauge or with the
conversion capsule gathers fuel level
information with the float. While
accurate, the gauge will fluctuate as the
fuel in the tank “slosh” around the tank
when boating because of the moving
parts - the float.
Swingarm Electric Sending Units
gather fuel level information the same
way as the mechanical sending units. It
does however connect to a dash mounted
gauge without a conversion capsule.
They are also a DIY product, letting the
consumer measure their tank depth and
make the swingarm the correct length.
•Direct Site Gauge is
complete on unit
Replacement Direct Site
Gauge available 035759-1007167
Part No.
Tank Depth
035750-1007158 7-1/2" 191mm
035751-1007159
8"
203mm
035752-10 07160
10"
254mm
035753-1007161 11-3/4" 300mm
035754-1007162
12"
305mm
035755-1007163
14"
356mm
035756-10 07164 16-1/4" 413mm
035757-1007165 17-3/4" 451mm
035758-10 07166
22"
559mm
Requires Dash
Mounted Gauge
Universal Fuel Level Sender
w/Diesel Return Designed for top
mounting in aluminum, plastic or stainless
steel fuel tanks in all types of marine
vessels. All stainless steel construction
resists corrosion and is ethanol compliant.
Meets and exceeds current NMMA and
ABYC specifications.
Reed Array Sending Units Features
protection from corrosion (internal and
external to the fuel tank). Standard with
a SAE 5 hole mounting bolt pattern.
Construction of Head - Engineering-grade
thermo-polymer. Suitable for gas, ethanol, diesel, bio-diesel and non-potable
water use.
•
Temperature Range -40°F
S
S
1/4"
•
NPT
female
thread
w/3/8"
Barb
•Internal components will not rust
to 176°F, -40°C to 85°C
•1/4" ground spade terminal
or corrode
•Pre-bent 90 degree float arm
• Meets requirements of ISO 10088, ABYC
•Float rotates easily in 90° increments
H-24, 33CFR 183.590 and ISO 8846
for tank wall & baffle clearance
standards.
Part No.
Tank Depth *Tank Depth
Part No.
Part No.
Tank Depth 035722-1007151 6-12" 152-305mm 035789-10 09543 6-24" 152-610mm 035791-10 10089 6-24” 152-610mm
035729-1007152 12-24" 305-610mm
035725-10 07154 4-28" 102-685mm
*035726-1007155
4-28" 102-685mm
*Complete Kit,
comes complete
with dash
mounted gauge.
Other styles are available upon request.
Calibrated to 33-240 Ohm’s
An industry Standard
Complete with 5-hole gasket and
screws.
Compatible with
Dash Mounted
Gauge 33-240 Ohm’s
3
3
3
Compatible with
Dash Mounted
*Tank Depth
Part No.
152mm
6”
035773-10 09920
178mm
7”
035774-10 09921
203mm
8"
035769-1008350
229mm
9"
035761-1007169
279mm
11"
035762-1007170
330mm
13"
035764-10 07171
381mm
15"
035765-1007172
035767-1007173 18-1/2" 445mm
533mm
21"
035768-1008351
584mm
23"
035770-10 08352
Tank Mounting Strips
• 2" W (50.8mm) x 30" L between tank
and hull
(762mm) x 1/4" H
(6.35mm)
• Black
3
3
3
Compatible with
Dash Mounted
3
Compatible with
Dash Mounted
3
Compatible with
Dash Mounted
3
Part No.
Description
035731-1009566 Tank Mounting Strips
*Sender length is 1" shorter than tank depth.
Part No.
Tank Depth
035724-1007153 12-24" 305-610mm 035728-1007157
Includes retainer ring.
035727-1007156
rosion, while insuring a secure
installation of tank.
(8 each) 22"L Tank Cradle Metal Straps
(2 each) 1/4"-20 x 3" Fully Threaded Hex Head Bolt
(8 each) 1/4"-20 x 1/2" Phillips Head Cap Screw
(10 each) 1/4"-20 Nylock Nut
(4 each) #14 x 1-1/4" Phillips Button Head Screw
Fuel Pick-Ups
3
3
• Can also be
used for
padding with
hold down straps.
Dash Mounted
Cradle Tank Hold
Down Kit
Part No.
Description
30011009542 Cradle Tank Hold down Kit
screws.
Universal 5-Hole Gasket
complete with fine/course
replacement screws and
washers
(Kit includes two (2) universal
nylon straps with quick-release
buckle, four (4) stainless steel
hold down brackets and mounting
screws.
• Closed Cell
Poly Foam
Construction
3
3
with Diesel Return To meet the needs
of a return line found on diesel and some
fuel injection engines, Moeller’s patentpending design ensures all needs are met.
Part No.
Description
035711-1007148 Hold Down Kit for Topside
Fuel Tank (72” length)
Below Deck Tank Mounting Strips
Self-adhesive mounting strips
cushion between the tank
and the hull and provide
room for circulation. Can
be used for topside
tanks as well.
•Plastic coated straps resist corSold in a pair.
Cushion strips
Complete with 5-hole
gasket and screws.
Options
25 |
•Stainless Steel construction provides
efficient performance
•A direct Original Equipment
Manufactured replacement
(Includes everything you need:
Deck fill, (2) 1-1/8”, and (4)
2-1/4” stainless steel hose
clamps, chrome-plated brass
thru-hull vent, 1-1/2” fuel fill
hose and 25” (63cm) of 5/8”
vent hose and 5/8” brass hose
barb, 2 mounting strips.
3
3
Shown attached to
mechanical sending unit.
Part No.
035760-1007168
Reed Switch Sending Units collect fuel
level information more consistently than
swingarm senders. They achieve this by
taking the measurement from the float
- which is still a moving part. However,
the fluctuation is much less because the
range of motion is much less.
Part No.
Description
03572307150 Fuel Tank Installation Kit
screws.
Options
Conversion Capsule Converts fuel level
reading from standard direct site gauge
to electric dash mounted gauge (33-240
Ohm’s).
screws.
Description
Requires Dash
Mounted Gauge
Requires Dash
Mounted Gauge
Features
Direct Site
*Limited Lifetime
Warranty
Part Numbers, Fuel Level Readings & Tank Depths
Part Numbers, Fuel Level Readings & Tank Depths
Features
Description
*Three Year Warranty
•Quick-release buckle
•Corrosion resistant stainless
steel fasteners
•A
luminum fitting 1/4
NPT
•3/8" I.D. Nylon
tubing
Deck Plate Fill
•C
onveniently designed
with screw
mount and splash lip.
• Ideal for use
with 1-1/2"
I.D. fill hose.
Part No.
Description
035740-1007195 Deck Plate Fill for Gasoline
Part No.
033500-1207413
033500-2407414
033100-12 09447
, 033100-2409448
Description
12" Threaded
24" Threaded
12" Poplock
24" Poplock
| 26
Connectors
Make the Right Connection.
From brass to aluminum, menders to elbows – connect with Moeller quality,
OEM fuel connectors for your permanent fuel tank requirements.
• Features high-quality brass and aluminum fittings.
Valves & Vents
Get More, Save More
with Moeller Quality.
Constructed of brass, these Moeller must-have valves meet ABYC H-24 requirements
and provide anti-siphon protection. Choose Moeller for all your valve needs.
Brass Hose Menders
Part No.
033211-1007196
033212-1007197
033213-10 07198
184008-1008023
Description
1/4" Hose Menders
5/16" Hose Menders
3/8" Hose Menders
Two (2) Stainless Steel Hose Clamps
*Each hose mender includes two (2) Stainless Steel Clamps
Fuel Fittings
Part No.
033402-1007202
033403-1007203
033417-10 07205
033429-1007206
Brass Nipple / Male
Brass Reducer / Female
Description
1/4 NPT X 1/8 FNPT Brass Reducer
1/4 NPT Male Brass Nipple
1/4 FNPT X 1/8 MNPT Brass Reducer
1/8 FNPT X 1/4 FNPT Brass Reducer
Brass Reducer / Male
Bulkhead Fittings
Moeller
Part No.
Scepter
Part No.
033306-10
Description
Style
08362
3/8 Barb, 1/4 NPT Brass Shut-Off
(A) Shut-Off
033300-10
07176
1/4 FNPT Male/Female Brass Shut-off
(B) Shut-Off
033301-10
07177
1/4 FNPT Male/Male Brass Shut-off
(B) Shut-Off
033303-10
07179
1/4 FNPT Female/Female Brass Shut-off
(B) Shut-Off
033302-10
07178
1/4 FNPT Brass Three-Way
(C) Three-Way
Connects (2) permanent tanks
to a single motor.
033305-10
07181
1/4 FNPT Brass Three-Way Valve-Click
(C) Three-Way
Connects (2) permanent
tanks to a single motor.
033312-10
07182
3/8 FNPT Brass Three-Way
(C) Three-Way
033304-10
07180
1/4 FNPT Brass Four-Way
(D) Four Way
Part No.
Description
033210-1007200 Straight 3/8" Brass Bulkhead
033435-1007211 1/4 FNPT Brass Bulkhead
Elbows
Male / Male
Male / Female
Part No.
Description
033206-1007199 Male/Female 3/8 NPT Brass Elbow
033436-1007212 Male/Female 1/4 NPT Brass Elbow
033438-1007213 Male/Male 1/4 NPT Brass Elbow
• Scoop vent
• White nylon
• Large 95 x 78 x
30mm display pack
009030 / 09030
009033 / 09033
Brass Hose Barbs / Male Thread
Brass / Male Thread
Aluminum / Male Thread
Part No.
033401-1007201
033405-1007204
033430-1007207
033432-1007208
033433-1007209
033434-1007210
Description
1/4 NPT X1/4" Brass Barb
1/4 NPT X 3/8" Brass Barb
1/8 NPT X1/4" Brass Barb
Aluminum Hose Barbs / Male Thread
Brass / Female Thread
Part No.
Description
033441-1007214 1/4 NPT X 1/4" Aluminum Hose Barb
Teflon Tape
®
515002-1008024
27 |
Brass Hose Barbs / Female Thread
Part No.
Description
033476-1007218 1/4 NPT x 5/16" Hose Barb
033474-1007217 1/4 NPT x 1/4" Hose Barb
033478-1007219 1/4 NPT x 3/8" Hose Barb
C
D
Installation instructions available at www.moellermarine.com
Scoop Vent
033435-10 / 07211
033210-10 / 07200
B
A
Part No.
00903009030
00903309033
Description
Scoop Vent White
Drain/Vent Short Cloud White Nylon. "Knock
In Barb" - Display Pack
Thru-Hull Vents
•Vent hose to the
fuel tank for
thru-hull ventilation.
•Plated finish.
Part No.
033201-1007193
035732-1007194
009024-10 09024
009024-10 /
09024
035732-10 / 07194
033201-10 /
07193
Description
90° Elbow
Thru-Hull Vent, Accommodates 5/8" I.D. Vent Hose
Thru-Hull Vent for Hulls Up to 1/2"
Thick, Accommodates 5/8" Vent Hose
Drain, Anchor. For 5/8" (16mm) Hose. White - Display Pack Thick, Accommodates 5/8" Vent Hose
Anti-Siphon Valves
•Anti-siphon valves, are required by Federal Law and the USCG on all permanent fuel tank installations.
Use 15 (Brass) calibrated for HP 200 & above and 30 (Aluminum) calibrated for HP below 200.
•Delivers Coast Guard/industry standard anti-siphon protection on all gasoline-powered boats.
•Combines anti-siphon protection with a
convenient hose barb design.
Part No.
033801-1007220
033802-1007221
033805-1008363
033807-1008364
033808-1008365
033806-1008366
Description
3/8" Barb, 1/4 NPT, Aluminum Anti-Siphon Valve
3/8" Barb, 1/4 NPT, Brass Anti-Siphon Valve
15 CAL
30 CAL
| 28
Coolers / Swing Back Seating
94 Quart / 89 Litre
043129 34.75"L x 18.63"W x 17.75"H
07806 883mmL x 473mmW x 451mmH
125 Quart / 118 Litre
04312644.50"L x 19.50"W x 21.25"H
07518 1130mmL x 495mmW x 540mmH
043127 51.75"L x 20.75"W x 20.00"H
07519 1314mmL x 527mmW x 508mmH
© Moeller Marine Products, Inc. / © Scepter Corporation
04312862.758"L x 22.50"W x 24.25"H
07520 1594mmL x 572mmW x 616mmH
Arctic Technology Break-through
Ice-Station Zero with Arctic Technology is the latest breakthrough in portable cooler engineering. Ideally suited for
fishing, camping, hunting, or any outdoor activity where
rugged durability and long-term cooling is a necessity.
Our sturdy ice-chest is the perfect companion for every
sportsman and outdoor enthusiast.
• High impact, seamless, Arctic White MDPE
double-walled construction that withstands sitting, standing, and environmental punishments.
• Each lid seal undergoes a 24 hour pressure fitting process
to ensure the best seal possible.
• Seaworthy design provides longer life with corrosion
resistant stainless steel hinges and t-nut
fasteners that hold the lid secure.
• Higher R value insulation retains the cold longer.
• Resilient, FDA approved polyethylene won’t absorb
or transfer odors; no more fishy smells to worry
about.
• Specially formed insulating foam is a moisture resistant, thick-celled latticework that keeps the inside
temperature where you need it:
warm or cold.
• Secure Cam-Latch Closures keep lid closed
tight, reducing heat leakage.
• Stout rope handles allow easy toting.
• Self Adhesive bumper pads provided to help
prevent sliding on deck surfaces.
• Zero drain design completely empties liquid.
• Dual drains are standard for simpler,
hassle free cleaning.
As a Seat, a Cooler or a Livewell,
You’re Sittin’ Comfortably with Moeller.
Boatbuilders have featured Moeller’s molded polyethylene, double-wall insulated,
swing back seats in their boats for decades. Whether a small skiff or a larger center
console, Moeller has a cooler/live well swing back seat to fit many models of boats.
Moeller’s flat panel aluminum supports slide fore/aft and have advantages over other
side pole configurations as rope and fishing line will not latch on.
•Molded mounting plates make installation easy •OEM marine-grade pleated vinyl
•Corrosion resistant composite seat frame
•Mildew-resistant thread
•Double-wall foam insulated base
•Deep foam cushions
•H
igh impact, seamless, MDPE double-walled construc- •Stainless steel hardware
tion that withstands sitting, standing, and environmental punishments
Cooler Mounting Kit. NEW
PRODUCT
Seat back swings forward.
Hold Down Kit & More.
29 |
NEW
PRODUCT
Part No.
18500907805
18500807804
020897-1008028
020896-1008029
185004-1008030
4290210113
Description
Ice Chest Hold Down Kit for 94 qt. (89 Litre)
Ice Chest Hold Down Kit for 125, 170, and
270 qt. (118, 161, and 256 Litre)
Replacement Drain Plug for 94 qt. (89 Litre)
Replacement Drain Plug for 125, 170, and
270 qt. (118, 161, and 256 Litre)
T-Latch Replacement Kit (Previous Styles)
Cooler Mounting Kit
Part No.
ST2200P07358
ST2201P10128
ST2202P10129
ST2203P10130
ST3000 07361
ST3001 10131
ST300210132
ST300310133
Easily accessible
Cooler / Livewell area.
Description
Deluxe Swing Back Cooler / Livewell / Seat, 72 Quart (68 Litre) Capacity - White
Deluxe Swing Back Cooler / Livewell / Seat, 72 Quart (68 Litre) Capacity - Tan/Camo
Deluxe Swing Back Cooler / Livewell / Seat, 72 Quart (68 Litre) Capacity - Green/Camo
Deluxe Swing Back Cooler / Livewell / Seat, 72 Quart (68 Litre) Capacity - Black/Camo
Custom Swing Back Cooler / Livewell / Seat, 50 Quart (47 Litre) Capacity - White
Custom Swing Back Cooler / Livewell / Seat, 50 Quart (47 Litre) Capacity - Tan/Camo
Custom Swing Back Cooler / Livewell / Seat, 50 Quart (47 Litre) Capacity - Green/Camo
Custom Swing Back Cooler / Livewell / Seat, 50 Quart (47 Litre) Capacity - Black/Camo
| 30
Put Yourself in the
Driver’s Seat with Moeller.
From the largest offering of durable OEM polyethylene shells for the marine industry,
Moeller now makes this popular seat selection available to the aftermarket. Many
different configurations offer boaters UV-stabilized seating from smaller runabouts to
larger center consoles and flybridges. With UV-resistant, marine-grade vinyl standard and
innovative design in every chair package, Moeller continues to be the industry leader in helm
seating. All rotationally molded seat packages include durable, black, injection molded,
mounting plates for use with any slider or swivel that has a standard marine mounting hole pattern. Many other unfinished helm seat designs are also available from
Moeller on a supplemental CD.
Heavy Duty Helm Seats
026333-HD / 07365
•Small radius offers boaters ability
to use it in limited deck space
•Tapered European look
reduces excessive bulk in the
chair yet no compromise in
integrity or strength
•Mounting plate molded
directly into seat
–20.50"D x 16.75"W
Classified as Type B seat ABYC H-31
x 19.50"H
–521mmD x 425mmW x 495mmH
Part No.
026333-HD07365
31501307366
33501309620
Description
White 315013 Chair and Cushion Set
White 315013 Chair Only
White Cushion Set for CU2333-2D Chair
ST2000-HD / 07369
•Standard Seat with Molded Arms
•An Industry Favorite
–21.45"D x 20.50"W x 17.82"H
–545mmD x 521mmW x 453mmH
Part No.
ST2000-HD07369
ST2000-D07370
CU1000-2D07371
Description
White 2000 Chair, Cushion Set and Mounting Plate
White 2000 Cushion Set
ST2050-HD / 07374
•Narrow Standard Seat
for Tight Applications
•Gettin’ You Out of
Those Tight Squeezes
–15.25"D x 16.50"W x 15.25"H
–387mmD x 419mmW x
387mmH
Part No.
ST2050-HD07374
ST2050-D07375
CU1050-2D07376
Description
ST2070-HD / 07381
ST2071-HD / 07384
•Economy Seat
•Durable & Affordable
–17.50"D x 15.63"W x 16.25"H
470mmH
•Safe, Secure Seating for
the Offshore Boater
–21.45"D x 20.50"W x 19.32"H
492mmH
Mounting Plate
•Made of High Density
Polyethylene
•Enables You to Mount Seat
to Spider or Seat Swivel
•Standard Seat Slider Bolt
Pattern (5" x 12")
Part No.
Description
305919-1208367 Mounting Plate
Part No.
ST2070-HD07381
ST2070-D07382
CU1070-2D07383
Part No.
ST2071-HD07384
ST2071-D07385
CU1071-2D07386
Description
ST2080-HD / 07387
ST2090-HD / 07390
•Extra-Wide Offshore Seat
with Padded Armrest
•Top-of-the-Line Comfort
in Any Weather
–18"D x 17.25"W
x 20"H
–457mmD x 438mmW
x 507mmH
•Extra-Wide, Ladder Back Seat
•A True Fisherman’s Chair
–24.50"D x 24.25"W x 20.50"H
–622mmD x
616mmW x
521mmH
Part No.
ST2080-HD07387
ST2080-D07388
CU1080-2D07389
31|
Description
Description
Part No.
ST2090-HD07390
ST2090-D07391
CU1090-2D07392
Description
| 32
Live Wells
Water/Waste Tanks
(35mm)
(51mm)
(35mm)
(51mm)
From Customer Feedback, Moeller has
combined waste & water tanks in order
to reduce inventory and carrying costs!
•A vast array of combo water / waste tank sizes
ensures you the right fit for your vessel needs.
•Feature nominal wall thickness of 0.300" (7.6mm).
•Resin meets FDA spec CFT177 1520 requirements.
•Satisfies all U.S. Coast Guard standards.
•Provides standard NPT openings for vent, fill & drain.
•Polyethylene tanks will not filter taste into water or
emit waste odors.
•Exclusively manufactured
by Moeller: your leader
in innovation, design
and technology.
More sizes and configurations
available at moellermarine.com
Part No.
041204 07237
Capacity
4 Gallon / 15 Litre
Dimensions (Inches)
11.75"L x 10.25"W x 9.25"H
Dimensions (Millimeters)
“A”
5.13" 130mm
041206 07238
5 Gallon / 19 Litre
16.00"L x 11.75"W x 8.00"H
5.88" 149mm
041209 07239
9 Gallon / 34 Litre
17.00"L x 13.75"W x 10.25"H
6.88" 175mm
041215 07240
12 Gallon / 45 Litre
24.25"L x 15.25"W x 8.75"H
7.63" 194mm
04122007241
21.00"L x 17.00"W x 14.00"H
8.50" 216mm
04122407242
22.50"L x 22.50"W x 12.00"H
11.25" 286
041225 07243
29.50"L x 16.63"W x 12.75"H
8.31" 211mm
04122907244
28 Gallon / 106 Litre 23.50"L x 20.00"W x 15.50"H
10.00" 254mm
Round and Oblong Sized Live Wells
Constructed of one piece, seamless, heavy-duty Polyethylene roto molded plastic in
six convenient, efficient sizes. Each tank comes with molded in 10/24”deck fasteners
for easy deck hold down and include drain plugs for quick draining and cleaning. Lids
are recessed but allow for quick access. Ready to convert to bait well application with
plumbing accessory kit. One Year Warranty. Available in White & Light Blue.
042280/ 09916
042283/ 09919
mm
Pre-Installed 4” ID Access Cleanout Located Top Center of Tanks Listed Below
Part No.
04123007245
Capacity
Dimensions (Inches)
Dimensions (Millimeters)
“A”
11.50" 292mm
041239 07246 38 Gallon / 144 Litre 32.00"L x 21.50"W @ top x 19.75"W @ bottom x 14.50"H
813mmL x 546mmW @ top x 502mmW @ bottom x 368mmH
10.75" 273mm
041245 07247
10.44" 265mm
041277 07248
11.63 295mm
Water/Waste Tank Adapter Kits
Part No. Description
04131107249Straight Pipe-to-Hose Kit
33 |
Contains parts required to attach
hoses to tanks: (2) 1/2 NPT; 1/2" Barb;
(2) 1-1/2 NPT; 1-1/2" Barb; (1) 1-1/2"MNPT; 1/2"
FNPT Reducer, Teflon Tape.
(Also for use with previous
style waste only tanks)
4” ID
04139007251 90° Pipe-to-Hose Kit
041336 07250 Relocation Kit
Contains parts required to attach
hoses to tanks: (2) 1/2" NPT; 1/2" Barb;
(2) 90 1-1/2": NPT; x 1-1/2" Barb; (1) 1-1/2"MNPT;
1/2" FNPT Reducer, Teflon Tape.
.
Contains fittings required to move location of fittings for
custom installations: (1) access plate, 4" I.D.; (1) 1-1/2 NPT plug; (2) 1/2 NPT plug;
(2) 5/8" plastic thru-hull fitting for supply or vent; (2) 1-1/2 plastic thru-hull fittings
for fill; (6) stainless steel screws, washers and nuts; Teflon tape.
042282/ 09918
Part No.
04228009916
042280-W10124
04228109917
042281-W10125
04228209918
042282-W10126
04228309919
042283-W10127
042284 10157
042284-W10158
042285 10159
042285-W10160
Description
23 Gal /87L,18”H x 20”D
23 Gal /87L,18”H x 20”D
29 Gal /110L,17”H x 23”D
29 Gal /110L,17”H x 23”D
26 Gal /98L,16”H x 28”L x 16.38”W
26 Gal/98L,16”H x 28”L x 16.38”W
49 Gal/185L,18”H x 29”D
49 Gal/185L,18”H x 29”D
40 Gal/151L,18”H x 35.3”L x 20.25”W
40 Gal/151L,18”H x 35.3”L x 20.25”W
100 Gal/379L, 25”H x 36.5”D
100 Gal/379L, 25”H x 36.5”D
042281/ 09917
| 34
Battery Accessories
Battery Handle
with One-Touch Charge Indicator
& 12 Volt Adapter Built-in!
•T
he Power Plant holds 27, 30 & 31
series batteries.
• Non-corrosive hi-strength
plastic construction.
• Easy-to-use one-touch charge indicator.
• 12 Volt adapter built-in to lid!
(Includes 10 amp fuse for added protection.)
• Complete with hold-down strap and
mounting hardware!
• Fits new style battery dimensions!
Power Plant
Holds 27, 30, & 31 Series Batteries
04220716.50"L x 9.13"W x 11.50"H
07512 420mmL x 232mmW x 293mmH
Holds batteries up to 13.25"L x 7.25"W x 8.88"H / 337mmL x 184mmW x 225mmH
REPLACEMENT
39" / 102cm Battery Strap
•Includes Footman
Loops & Stainless
Steel Screws.
• Fits most 27 Series battery boxes.
• Allows for easy installation in confined areas.
Battery Boxes
• Non-corrosive hi-strength plastic construction.
• Complete with hold-down strap.
and mounting hardware!
• Complies with industry
requirements.
Holds PWC Lawn & Garden Batteries
0422319.5"L x 7.5"W x 8.5"H
09615 241mmL x 190mmW x 216mmH
Holds 24 Series Batteries
04221314.00"L x 9.62"W x 10.75"H
07258 355mmL x 244mmW x 273mmH
Holds 27, 30, & 31 Series Batteries
042217-1007262
Battery Trays
• Non-corrosive hi-strength plastic construction.
•Self-locking security knobs.
•Easy to install.
• The hold down rods on the current battery
trays are SS
04221512.75"L x 7.50"W x 9.50"H
07260 324mmL x 191mmW x 241mmH
NEW
PRODUCT
Part No.
Description
04223510111 Battery box carry handle fits most grouped 27 battery
boxes
04221416.37"L x 9.50"W x 11.37"H
07259 415mmL x 241mmW x 288mmH
Strap Battery Trays
• Heavy duty battery
tray includes tray,
quick release buckle
and strap.
•T
wo models that
securely fits either
a 24 or 27 series
battery.
NEW
PRODUCT
Battery Box Hold Down Kit
•Quick-release buckle.
•Corrosion resistant
stainless steel
fasteners.
04223214.38"L x 7.50"W x 11.25"H
09621 365mmL x 191mmW x 286mmH
Holds batteries up to 11.75"L x 6.75W x 7.75"H / 298mmL x 171mmW x 197mmH
042233
10109
35 |
11.25”L x 7.00”W x 1.25”H
Holds 29 - 31 Series Batteries
04221615.38"L x 8.00"W x 12.00"H
07261 391mmL x 203mmW x 305mmH
14.5 height of strap
Part No.
035711-1007148
Description
Hold Down Kit for Topside Fuel Tank & Battery Box
(72” length) (Kit includes two (2) universal nylon straps
with quick-release buckle, four (4) stainless steel hold
down brackets and mounting screws.
042234
10110
12.50”L x 7.00”W x 1.50”H
Holds batteries up to 11.75"L x 6.75W x 7.75"H / 298mmL x 171mmW x 197mmH
| 36
Roto-Molded Battery Boxes
Battery Accessories
Battery Terminal Covers
•Meets Coast Guard safety
regulations for anti-short
protection.
•Accepts up to 1/2" O.D.
cable with flexible PVC
covers.
•Set includes (1) black and
(1) red cover.
NEW
PRODUCT
Moeller’s complete line of roto-molded battery boxes come in 7 sizes, and are
seamlessly designed to tackle the elements for long-life battery performance.
• Non-corrosive high-strength polyethylene construction resists chemicals and rust.
• Maintains tough properties with nominal 0.185" (4.7mm) wall thickness.
• Complies to industry requirements and meets Coast Guard regulations (ABYC Reg E10).
Captive hold
down fasteners
Double-wall lid
construction for
added strength
Part No.
Description
099078-1007264 Battery Terminal Cover Set
099078-0207809 Red Battery Terminal Covers (Bulk)
099079-0207810 Black Battery Terminal Covers (Bulk)
Digital Battery Indicator Gauge
•Condition Indicator
•Takes the guesswork out of battery condition.
•Gauge indicates remaining charge.
•LED display provides quick easy read.
• Trolling motor, marine, auto/farm, lawn/garden
Battery Indicator Gauge
•Eliminate the guess work.
• Instantly determine condition
of your 12-volt battery system.
• Expanded scale allows for
easy to read battery level.
• Rear backlit scale.
Part No.
Description
042218-1007263 Portable Hand Held Battery Power Gauge
Battery Disconnect Switch
Roto Battery Switches
042227
042219-10
Part No.
Description
042219-1007511 Battery Disconnect Switch with Key
042227 09541 Replacement Key
37 |
042221 / 09389
Designed to work with 1 and 2 battery systems.
Includes any 4 direction battery cable routing. Ideal
for smaller trailerable boats with the need for a battery shut-off switch or two battery charging.
Two Battery
Copper tinned wire screws/nuts for
On-On-Off
connections.
•Length 2.72" (69mm)
Width 2.72" (69mm)
Height 2.87" (73mm)
•Two models available, On-Off or
On-On-Off.
•Voltage Rating: 12-50 Volts DC.
•Continuous Rating: 200 Amps DC.
•Cranking Rating: 1000 Amps DC.
One Battery
On-Off
042227
Part No.
Description
042228-1009538 One Battery On-Off
042229-1009539 Two Battery On-On-Off Scalloped cable
entry/exit points
on all four sides
Mounting flanges
on all four sides for
easy installation
Part No.
Description
04223610112 Digital Battery Indicator Gauge
• Conveniently places on/off switch on
bulkhead.
• 110 amp continuously at
12V / 500 amp at 12V for
10 seconds.
• Key & cover have environmentproof boot to reduce corrosion.
• Prevents battery discharge
and unauthorized use.
One piece
seamless bottom
construction
042222 / 09390
042224 / 09392
042230 / 09611
042225 / 09393
Moeller
Part No.
Scepter
Part No.
042221
09389
4D Battery Box
042222
09390
2 Std. Batteries Box
042230
09611
GC2 Battery Box
042223
09391
8D Battery Box
042224
09392
Double 8D Low
Battery Box
042225
09393
8D High Battery Box
042226
09394
Double 8D High
Battery Box
Description
Dimensions (Outside) Dimensions (Inside)
26.5"L x 14.5"W x 12.75"H
18.86”L x 15.36”W x 11.79”H
15.60”L x 11.35”W x 13.01”H
26.75”L x 17”W x 13.25”H
29.50”L x 26.5”W x 13”H
26.625”L x 16.875”W x 15”H
29.375”L x 26.625”W x 14.75”H
042223 / 09391
042226 / 09394
Weight
Fits Batteries
21.5"L x 9.375"W x 10"H
15lbs/7kg
21"L x 9.25"W x 9.5"H
533mmL x 235mmW x 241H
13.75"L x 10.25"W x 8.75"H
10lbs/5kg
13.75"L x 10.25"W x 8.75"H
14.61"L x 10.48"W x 13.01"H
16.2lbs/7.3kg
14.61"L x 10.48"W x 13.01"H
21.75"L x 11.75"W x 10.125"H
16.2lbs/7.3kg
21.5"L x 11.5W x 10"H
24.50"L x 21.125"W x 10.25"H
26.8lbs/12kg
24"L x 21"W x 10 H
21.625"L x 11.875"W x 10.25"H
19lbs/9kg
21"L x 11.5"W x 10"H
24.625"L x 21.25"W x 10.25"H
30.6lbs/14kg
24.5"L x 21.25"W x 10"H
Dimensional drawings available at moellermarine.com
| 38
Moeller Design
Drain Tubes
Fluid Extractor
NEW!
Moeller Puts the Extra in EXTRActors.
Exclusively designed to handle larger fluid extraction applications,
Moeller’s Fluid Extractors tackle the toughest jobs with ease.
Suitable for all forms of fluid extractions. Not for use with gasoline!
Brass Oil Transfer Pump NEW
PRODUCT
Brass pump allows for the transfer or
extraction of gas, oil, water and diesel fuel.
(241mmL x 267mmW x 368mmH)
7.0L/7.2
Quarts
9.5" L x 10.5" W x 14.5”H
15.0L/16 Quarts
9.5" L x 10.5" W x 18”H
9.5" L x 10.5" W x 18”H
Detail of the fold
down foot in the UP
position.
•
•
•
•
•
•
•
•
•
•
•
Easy to operate. suitable for engine
oil, gear oil, brake fluid, coolant,
water, etc. (Not for use with
gasoline!)
Two air outlets with check valves
on the handle allow for easy & quick
release of air pressure from the
extractor.
Decompression valve allows easy
release of the negative pressure.
Fixing valve & safety cup allow for
automatic shut-off.
Non-spark, non-power fluid extractor.
Includes 3 nylon tubes that can be
used for any non-corrosive fluid.
Fluid temperature range: 35° - 200° F
(1°- 95°C)
Air Inlet: 1/4”
AVG. Air cons: 2CFM
Working pressure range: 40 - 170psi
(2.8 - 11.7 Bar 0.28 - 1.17 Mpa)
5.0L/5.2
Quarts
Part No.
Description
03533009451 5.0L/5.2 Quarts Fluid Extractor
03534009574 7.0L/7.2 Quarts Fluid Extractor
03536010058 15.0L/16 Quarts Fluid Extractor
39 |
7L (7.2 Qt) 5L (5.2 Qt) Ideal for use in:
Removing stagnant bilge fluids in hard to reach areas, hobby, lawn
& garden, agriculture, marine, automobiles, household, ATV &
much more!
• Manual Pressure relief
• NEW Dual action vacuum
valve delivers gulp-free,
pump works
mess-free performance!
with both the upstroke and
downstroke
• NEW Fold-down Foot bracand gets the job done right in
es are built-in and provide
less time!
added stability.
• Extracts warm or cold oil.
• NEW Thread-on extraction
tube kit & garden hose
• No electric or air power
adapter kit included!
required.
• Automatic shut-off float elimi- • Available in convenient
sizes, 5.0L & 7.0L capacity.
nates overflow.
• No-mess features! Tethered
cap & easy-pour spout.
For replacement parts, please go
to www.moellermarine.com.
• NEW Bucket style handle
makes it easy to transport and
pour used oil!
Economy Fluid Extractor Kit
•
Universal self priming hand
pump.
•
Ideal for oil, water and other
fluids.
Kit includes:
•
•
Two 38" (96.5cm) dipstick tubes
and 40" (101.6cm) tubing.
Self priming pump.
Specifically designed for aluminum boats as a 1" drain
for transom, live well or bait well. Easily flanged fitting eliminates need for welding. An o-ring
forms a watertight seal in 0.04" to 0.09"
wall thickness.
New bucket style
handle detail.
NEW
PRODUCT
15L (16 Qt) Pneumatic / Manual
Operation Fluid Extractor
Drain Fittings Kit
Part No.
Description
033331-1007399 Economy Fluid Extractor Kit
Part No.
Description
04290410115 Brass Oil Transfer Pump
Part No.
Description
020848-00107275 Drain Fittings Kit
Drain Tubes
Flanging Tools
•Flanged 90° on one end to function as a drain
for transom, motorwell, livewell or baitwell.
•For use with Moeller’s Snap-Tite®, Turn-Tite®, &
Trail-n-Bail® Plugs.
•Installation requires a Drain
Fittings Kit (20848-001 / 07275)
021002-225D / 07291
and flanging tool.
021002-800D / 07299
For use with brass plugs
Part No. (Brass) LengthDescription
021253-225D07313 2-1/4"57mm1-1/4" OD Drain Tube
021253-300D07315 3"76mm
1-1/4" OD Drain Tube
021253-388D07317 3-7/8"98mm1-1/4" OD Drain Tube
For use with brass plugs
Part No. (Brass)
021003-188D07301
021003-225D07303
021003-300D07305
021003-400D07307
021003-600D07309
021003-800D07311
021003-1400D08026
*021003-1500D08027
For use with aluminum plugs
Part No. (Aluminum)Length
021002-188D07289
1-7/8" 48mm
021002-225D07291
2-1/4" 57mm
021002-300D07293
3"
76mm
021002-400D07295
4"
102mm
021002-600D07297
6"
152mm
021002-800D07299
8"
203mm
14"
356mm
15"
381mm
*Fits Boston Whaler Montauk
Motorwell Drain Tubes
•Concentric rings snap-lock in place for tight leak proof
seal in 1" diameter opening.
•Durable plastic will not rot, bend or mildew.
•For motorwell, livewell or baitwell.
•3/4" (19mm) to 2-1/2" (64mm) long.
Use Part 051006-10 / 07342
(Deck & Baitwell Plug) to seal opening.
Part No.
Description
020300-1007268 Motorwell Drain Tube
020300-00107807 Motorwell Drain Tube - Bulk
020314-0007271 Motorwell Drain Tube Installation Tool
Includes required flanges for drain tube installation.
Instructions available online www.moellermarine.com.
Part No.
Description
020700-0007272 1" O.D. Flanging Tool
020704-0007273 1-1/4" O.D. Flanging Tool
020720-0007274 Flanging Tool for Drain Fittings Kit
(020848-001 / 07275)
Description
1" OD Drain Tube
1" OD Drain Tube
1" OD Drain Tube
1" OD Drain Tube
1" OD Drain Tube
1" OD Drain Tube
1" OD Drain Tube
1" OD Drain Tube
021253-388D / 07317
*021003-225D / 07303
Transom Drain Tube
Our transom drain tube has
(3) recessed holes for a flush
fit to the boat transom
or exterior - which will
/
allow water to drain 020304-10
07270
when boat is trailered.
Part No.
Description
020303-00107269 Transom Drain Tube (Includes 1 drain plug)
020304-10 / 07270
020304-1007270 Transom Drain Plug, (5) per package
| 40
Drain Plugs, Grommets & Accessories
Seal it Right. Seal it Tite® with Moeller.
Our Snap-Tite® and Turn-Tite® plugs have been the industry benchmark in bailer plugs for
many years. Known for their durability and ease of use, these plugs provide boaters a
lasting seal on the water. Moeller buckets of plugs are widely recognized at retail locations
and offer excellent buying add-ons at checkout counters.
Snap-Tite
®
Deck & Baitwell Plugs
A neoprene body, these Moeller innovations provide a leak-proof, non-slip
seal featuring stainless steel plates and adjustable brass cam snaps.
Part No.
051001-1007331
051002-1007333
051003-1007335
051004-1007337
051005-1007339
051006-1007341
051007-1007343
051008-1007345
051009-1007347
051010-1007373
Description
3/8" I.D. Deck & Baitwell Plug
Air Chamber Plug
Part No.
Description
029000-00107319 1" Brass Snap-Tite (Bulk pack of 50)
029000-1007321 1" Brass Snap-Tite (Clam Shell Packaging)
029000-5007323 1" Brass Snap-Tite Display (50 pcs. in Bucket)
029001-00107324 1" Brass Snap and Turn-Tite bulk
(25 pcs. each of 1" Turn-Tite & 1" Snap-Tite)
029070-00107326 1" Aluminum Snap-Tite (Bulk pack of 50)
029070-1007329 1" Aluminum Snap-Tite (Clam Shell Packaging)
029070-5007330 1" Aluminum Snap-Tite Display (50 pcs. in Bucket)
029055 095411.25" Brass Snap-Tite
029055-00107325 1.25" Brass Snap-Tite (50-Pack)
Turn-Tite
®
Specifically designed to
seal 5/8" openings in
baitwells, livewells or
dry boxes. Just pop in
the black neoprene
rubber plug for a
secure, tight fit.
009021 / 09021
009027-09027
Part No.
Description
009021 09021 Transom Drain Plug, (5) per package
009027
09027 Plug & Base. White. Large - Display Pack
Scupper Valve NEW
PRODUCT
• Molded white plastic with soft black
flapper valve.
• Uses #6 fasteners (Not included)
Tiller Rope Grommets
•Recessed mounting holes for #6
fasteners.
•Prevents damage to control cables.
•I.D. 2-7/8" diameter with a
1/2" bottom flange.
Part No.
Description
020101-1007633 Plastic Tiller Rope Grommet (Fits 3" / 76mm)
Part No.
Description
020308-1010088 Cockpit Scupper Valve 2-7/8”
Brass Drain Plug NEW
PRODUCT
Automatic Drain Plug
• Depth 5/8”
41 |
• Plug & Base. White.
Medium - Display
Pack.
Part No.
Description
090801-1007353 Air Chamber Plugs
•Cast brass flange with brass plug.
•1/2" IPT Thread.
•Flange OD 2"
Part No.
Description
020895-00107280 1" Aluminum Turn-Tite (Bulk pack of 50)
020895-5007282 1" Aluminum Turn-Tite Display (50 pcs. in Bucket)
020899-1007284 1" Brass Turn-Tite (Clam Shell Packaging)
020899-00107286 1" Brass Turn-Tite (Bulk pack of 50)
020899-5007288 1" Brass Turn-Tite Display (50 pcs. in Bucket)
020883 072791.25" Brass Turn-Tite (Bulk)
020883-001072781.25" Brass Turn-Tite (50-Pack)
Plug & Base, Drain Anchor
Part No.
Description
020305-1010064 Replacement Plug
020306-1010149 SS Garboard Drain Plug Kit Kit
020307-1010087 Brass Drain Plug
• Flapper automatically
drains water from hull
when under way.
• Water tight seal
when boat is idle.
• Flexible neoprene plug
inserts in the transom drain hole.
• Fits 1" (25mm) dia. drains,
up to 2-1/4" (57mm) thick
transoms.
Part No.
Description
051011-1008368 Automatic Flapper Drain Plug Set
051011-1109479 Replacement Flapper Valve
Snap-Tite ®/ Turn-Tite ® Bailer Plugs
| 42
Fishing Rod Holders
Rod Holders
Choose Your Style.
Moeller’s new rod holders meet the needs of the serious fisherman. Options include flush mount, surface
mount, vertical mount in both plastic and Stainless Steel.
Knife and plier holder included with the SS/plastic vertical rod
holder models (091032, 091034,091035, 091036). Everything
you need to protect your expensive fishing rods and make them
easily accessible.
Flush Mount
Rod Holder
Rod Holder NEW
PRODUCT
• Length: 9-1/2”
• Inside Diameter: 1-5/8”
• Mounts at 30” angle
• Corrosion resistant
• Single rod holder
• Super nylon construction
• Easy installation using bracket mounts included
Part No.
Description
091027 10062 Rod Holder Flush Mnt. Black
091028
10063 Rod Holder Flush Mnt. White
Part No.
Description
09103210119 Rod Holder Brkt. Mount White
Tournament Rod
Holder
NEW
PRODUCT
NEW
PRODUCT
• Pivots up and down
• Swivels 360 degrees
• Unique Locking System
• Stainless steel mounting for
1” square rail
Part No.
Description
09102910061 Single Rod Holder
Aluminum Rod Holder NEW
PRODUCT
Rod Holder NEW
PRODUCT
Rod Holder SS NEW
PRODUCT
• Stainless steel construction
• Easy installation using bracket
mounts included
• Easy installation using clamp on brackets
Part No.
Description
09102610117 Bracket Mount Rod Holder Stainless Steel
Part No.
Description
091030 10139 Rod Holder SS
2 Rod Holder NEW
PRODUCT
3 Rod Holder NEW
PRODUCT
Part No.
Description
09103310120 2 Rod Holder Single Construction
Part No.
Description
09103410121 3 Rod Holder Single Construction
2 Rod Holder SS NEW
PRODUCT
3 Rod Holder SS NEW
PRODUCT
• Two rod holder
• Durable nylon
construction
• Easy installation using
hardware provided
• Three rod holder
• Durable nylon construction
• Easy installation using hardware provided
Fishing Rod Holders
•Kit comes complete with (4) 7"
lengths of aluminum track, (8)
vinyl rod holders and all
hardware.
•Securely holds rod
tip and handle.
•Permanent set not
required; adjustable.
•Mounts vertical or
horizontal in boats
or storage areas.
•Also ideal for
bow/stern light
staff holder.
Part No.
Description
091025-1007634 Fishing Rod Holder Set
091038-0010146 Repl. Rubber Inserts (8)
• Two rod holder
• Easy installation
using hardware
provided
• Three rod holder
• Easy installation using hardware provided
• Durable, economical and corrosion resistant
• Soft foam inserts for pole protection
• Measures 7-13/16” L x 2-1/4”W x 3-1/4” H
Part No.
Description
09103710060 Aluminum Fishing Rod Holder
43 |
Part No.
Description
09103510122 2 Rod Holder Stainless Steel
Part No.
Description
09103610123 3 Rod Holder Stainless Steel
| 44
Motor Flushers
Extend Your Motor Life –
Quickly, Easily, Effectively.
Moeller offers a comprehensive series of motor flushers that flush
contaminates from your lower unit cooling systems. Each quickly removes salt and mineral build-up with a simple flush that slips over side water inlets on most inboard and outboard lower units. Install in seconds using just a garden hose.
099076-00 / 07393
099085-00 / 10041
• No tools required
• Easy to install in seconds for
out of the water engine
flushing applications.
• Easy-to-use
• For use on all lower units
NEW
PRODUCT
• Designed to fit Inboards,
performance ski
boats and all boat
• Ideal in low-pressure condi
tions prevalent around marinas with a thru hull
water intake!
• Improved water flow with
• Stainless Steel T fitting slides
rectangular cups will virtu
into the intake slot in
ally eliminate water leakage
either direction for a
for higher-pressure flushing.
quick fit.
• Flusher is supported with
with side water inlets;
360 degree plastic support
includes Volvo's SX.
ring insuring a tight fit to the
099082-00 / 07396
bottom of the boat.
Dual Water Feed
• No more trying to fit between
• A customer-favorite for all
the trailer bunks and secure a
engines over 50 horsepower.
pole to the ground.
• Improved water flow with
• A quick couple of turns of the
rectangular cups will virtually
locking nut and the flusher is
eliminate water leakage for
fully secure and ready to use.
higher-pressure flushing.
099077-00 / 07395
with side water inlets;
includes Volvos.
380160 / 09564
Professional Dual Water Feed
Motor Flusher
• Installs in seconds
• Rectangular cups
Volvo Round Cup
• No tools required!
• Easy-to-use!
• Large cup prevents
water blow-by or
fall-off during usage.
Ideal for Generator Sets
009042-00 / 09042
8"
200mm
6"
150mm
03603
03595
08672
4"
100mm
6" (150mm) Funnel and
8" (200mm) Funnel
008672 08672 Multi-use 3" OD Funnel
Heavy-Duty Shop Repair Bin
• Rustproof, dentproof & resists
temperature changes.
•Multi-use design is perfect for marine parts.
•Flush handles take up less room.
•Hinged lid securely closes and is lockable.
•24"L x 20"W x 12"H / 609mmL x
508mmW x 304mmH
Part No.
Description
00832808328 Heavy Duty Marine Storage Box
Lower Unit Pump NEW
PRODUCT
Transom Pad
•Rubber pad is oil and weather resistant.
•Reduces motor vibration noise.
•Fits most outboards to 25hp.
•Protects transom.
0"
11.0
• Telescoping tube
allows precise
alignment for
hard-to-reach areas.
– Fits 200; 250; 270; 280 & 290 hp lower units Garden hose quick connect application
45 |
Part No.
Description
00359503595 18" (455mm) Rigid Funnel
00360303603 18" (455mm) Flex Funnel
00359003590 3 Funnel Assortment
Includes 4" (100mm) Funnel,
5"
099080-00 / 07790
• No tools required:
Telescoping flusher
installs in minutes.
Scepter’s funnels are perfect for all your boat engine and automotive
uses. Manufactured from quality, high-density polymers;
they won’t rust, dent, or crack.
• Made from a tough, high-density polypropylene.
• Great for gas / oil mix 2-cycle engine needs.
• A size for every need with standard funnel options from
4” to 8” (100mm to 200mm) diameters in the funnel
assortment.
• Specialty funnel:including, a super funnel, a transmission
funnel, and a flex funnel.
.7
• HD Metal yoke for added
strength and extended use.
Adjustable
Inboard Engine
More Resistant to Maintenance
Chores Than You Are.
14
• Designed for engines above
75 HP.
099081-00 / 07397
Funnels, Storage
• Quart size pump for outboard lower units,
power trim and tilt units.
• Fits outboards and stern drives with
3/8-16 threaded
screws.
• Fits outboards:
Johnson/Evinrude,
Mercury/Mariner,
Suzuki 25 Hp &
larger and Yamaha 8
Hp & larger.
Part No.
Description
099074-1007517 Transom Pad
Part No.
Description
04290510116 Lower Unit Pump
6"
6.8
| 46
Color Vision
Your Single Solution
for Complete Coverage
• Color matched to your engine’s
original color.
• Approved for use up to 250°
Offering a wide array of quality tested paint & primer products formulated to resist the
varying elements of the marine environment; we’ve got the finishing touches and protection you
need. Our fast drying aerosol sprays make it easy to create a professional finish: from primer to clear
coat.
• Formulated for the marine
environment.
• For use on all outboard &
inboard engines, stern drive
and lower unit applications
Primed for Your Environment
• We offer three types of quick-drying primer, providing you with the first line of defense against
corrosion and deterioration.
• Quick-dry formula!
• Oil & Gasoline Resistant.
• Creates an even, bondable surface needed for color coat adhesion.
• 12 oz. Net Weight.
The Most Up-To-Date OEM Colors
• Produces an insulating barrier that goes beyond aesthetic
appeal.
• Formula is resistant to oil and gasoline solvents within the
marine environment.
• Paints are color matched to the most up-to-date line of OEM
paint colors.
The Choice for Finishing
• Our finest acrylic resin Clear Coat completes your surface coverage.
• Fortifies your surface’s resistance to harsh environmental conditions.
• Creates the depth and luster necessary for a professional shine.
• Can be reapplied any time to maintain protective luster.
Special Tips
Special Tips For Best Results When Painting:
Use aerosol when can temperature is between 15.0C and 30.0C (60.0F and A00023908748 Paint Display with Signage
86.0F).
• A primer may be required before
painting. Check label directions to see
if a primer is recommended and, if so,
Part No.OEM# Description
for what applications.
025103 08034
Cummins Tan
• It is better to apply several light coats
025107 08035
Evinrude Blue Metallic
than one heavy coat. See label directions
for recommended recoating time.
02551607431
Honda Oyster Silver Metallic
02545407423 173547 Johnson/Evinrude Light Blue Metallic (1978-87)
02546107424 173744 Johnson/Evinrude White (1972-Pres.)
02535007419 92-78383-12 Mercury Phantom Black
02547807449 395222 OMC Charcoal (1986-Pres.)
02547907426 395127 OMC Cobra Charcoal Metallic (1985-Pres.)
Heat and solvent resistant acrylic
02542507420 172756 OMC White (1964-76)
lacquer is formulated for the extended
02543307421 172748 OMC White (1977-80)
staying power boat engines need.
02580409556Suzuki “Shadow Black”
• Color matched to your
02580509557Suzuki “Charcoal Metallic”
engine’s original color.
02551307429
Tohatsu Light Blue Metallic (1984-Pres.)
• For use on all outboard
02543607422
Volvo Aquamatic White (1972-Pres.)
& inboard engines, stern
025817 09889
Volvo Engine Charcoal/Grey
drive and lower unit
025815 09887
Volvo Engine Red
applications.
02581609888
Volvo Grey, DPX & DPS Drives
• 12 oz. Net
02548807427
Volvo I/O Grey (1989-Pres.)
Weight.
02581809890
Volvo Silver
02581409886
Yamaha Blue Gray
02551507430
Yamaha Dark Blue Metallic (1994-97)
025469 07425 LUB87PNTSLVR Yamaha Metallic Blue Silver (1985-90)
02581309885
Yamaha Shiny Black
47 | © Scepter Corporation
Engine Paint
Marine Paint
*High Temp
up to 1200º
02522507434 Alpine GM Green(1977-Pres.)
02510407802 Caterpillar Yellow
02532007445 Chris Craft Blue
02534007446 Chrysler Blue
02549107428 Crusader Blue
02547507447 Diesel Red
02520307433 Gloss Black
02580909561 *High Heat Aluminum
02580609558 *High Heat Black
02580809560 *High Heat Charcoal
02580709559 *High Heat Metallic Black
02581109562 *High Heat White
02510007442 Neptune Gloss Black
02510207443 Neptune Flat Black
02510907444 Sea Foam Gloss White
02547307448 Volvo Green
02590009850 Olive Drab Camoflauge
02590110107 Camo Paint 3 Pack
Zinc Primers
Clear Coat
Finishing any paint
project should include
application of Moeller’s
Clear Coat increases
luster and depth.
• Formulated for the
marine environment.
• For use on all outboard
& inboard engines, stern
drive and lower unit
applications.
• Enhanced U.V. Protection.
02551907432 Clear Coat
Camo Paint NEW
PRODUCT
3 Pack
Tan, Black, Olive Drab
Camoflauge paint 3 pack.
02590110107 Camo Paint 3 Pack
• For aluminum surfaces above or
below the waterline use our Zinc
Chromate. This powerful primer
etches into the aluminum, forming
a strong surface/primer union that
is resistant to corrosion. For professional use only.
Sandable Primer
• For steel and iron surfaces, especially welded joints, above or
below the water line, use our Zinc
Cold Galvanizing or Zinc Phosphate.
This corrosive barrier contains a
high percentage (95%) of zinc, for
maximum resistance against solvents & abrasions.
• Improves bonding of
color coat.
02542107440 Zinc Chromate Yellow
02547207441 Zinc Chromate Green
02580007437 Cold Galvanizing Primer
02580107438 Zinc Phosphate Yellow Zinc
02580207439 Green Zinc Phosphate
02580309563 Bright Zinc Galvanizing
For surfaces above the
waterline, including bare
metal, steel, iron,
fiberglass, and wood.
• Helps Fight Rust.
• Helps level nicks
& hairline cracks.
0257300743 Red Oxide
02574007436 Platinum Grey
| 48
Your Single Source Solution.
A Proud Division of the Moore Company
801 N. Spring Street,
Sparta, Tennessee, USA 38583
moellermarine.com
Let Moeller’s innovative people and
products show you how to drive
your sales by calling 931.738.8090,
or faxing 931.738.9835.
170 Midwest Road, Toronto,
Ontario, Canada M1P 3A9
sceptermarine.com
Let Scepter’s innovative people and
products show you how to drive
your sales by calling 800.387.6018
or faxing 416-751-4451.
©2014 Moeller Marine Products, Inc. / Scepter Corporation 2014-MSCATALOG-01

moellermarine.com sceptermarine.com

Transcription

Similar documents

suzuki - Fuelpak

Window Sticker

GAL VALLETENZANO (LOCAL ECONOMIC DEVELOPMENT

Window Sticker - FordDirect.com

Hiller / Bell 47 Turbine Helicopter Technical Specifications and

John Sheehan - State Ag and Rural Leaders

2014 valkyrie - Honda Powersports

Bleeding Air from Diesel Fuel Lines and Filters

Scepter Marine

Member Discount Fuel Program - Terre Haute Chamber of Commerce

Window Sticker - FordDirect.com