Latex Acrylique Force1 - Condor Chimiques Inc.

Comments

Transcription

Latex Acrylique Force1 - Condor Chimiques Inc.
Latex Acrylique Force1
Description
Acrylic Latex rust inhibitor is a low VOC content, high quality elastomeric coating for
corrosion control. Made of special raw materials which give excellent rust inhibition
properties, it also releases a pleasant smell during application. It protects metal surfaces
that are constantly exposed to humidity and corrosive vapors. It is mainly used for
automotive, industrial and agricultural applications. Easy to apply, its semi-liquid
consistency allows it to scatter in small cracks and other confined places where water
could cumulate and cause damages. Once dried, it forms a durable and flexible
protective film that doesn’t leak. Used on internal surfaces, this rust inhibitor coating
offers an effective long term protection . Slightly green and without solvent, it is
formulated to respect the environment.
Surface Preparation
Use a degreaser to eliminate all dirt and be sure that surface is free of oil, frost, dust,
chipped paint, humidity, rust and any loose or deteriorated materials that could affect
bounding.
Application
Stir well before use. After surface is clean and dry, promptly apply in thin coat of at least
5 mils (1/16 in.) thickness, with a sprayer or a paintbrush. Use necessary security
precautions as for individual protection and for cleanliness of application site.
Cleanning
Clean tools and equipment with water.
Package
Available in 4L, 19,9 L 60 L and 205 L
Shelf Life
12 months after purchasing date when kept in its tightly closed original container. Store
shielded away from the sun to avoid product’s premature degradation..
Condor Chimiques Inc.
2645 B, Terra-Jet, St-Cyrille-de-Wendover, Québec, J1Z 1B3
www.condor.pro
[email protected]
Phone.: 819-474-6661
Fax.: 819-474-6681
Latex Acrylique Force1
Warning
Technical Data Table
Specifications
Appearence
Green Color Gel
Solids by Volume
60 % to 70 %
Weight
1,36 (about)
Coverage
3,2 m²/L (about) by coat de 1/32 mm
(16mil)
Dry Time
at 50 % H.R. 20° C (68° F)
Dry to the touch
2 hours (approx)
Service Temperature
-40° C to 90° C ( -40° F to 194° F) Dry
coating
Caracteristics
Permanent Rust Proofing for new and
old vehicles Long Lasting Protective
coating Film that never dries Dripless
MAY IRRITATE EYES AND SKIN. Do not
get in eyes, on skin or on clothing. Keep
out of reach of children.
FIRST AID TREATMENT: Contains
Stoddard solvent. If swallowed, call a
Poison Control Centre or doctor
immediately. Do not induce vomiting. If
in eyes, rinse with water for 15 minutes.
If on skin, clean with mineral oil
followed by soapy water then rinse well.
* Drying time depends on application method, temperature and porosity surfaces
Warranty
The customer shall verify of the suitability of this product for the intended purpose.
Applicator's skill, weather and surface conditions being beyond manufacturer's
control, we limit our liability to replacement of defective material only in sealed
container, within 1 year of proof of purchase. FOB plant.
Condor Chimiques Inc.
2645 B, Terra-Jet, St-Cyrille-de-Wendover, Québec, J1Z 1B3
www.condor.pro
[email protected]
Phone.: 819-474-6661
Fax.: 819-474-6681
Powered by TCPDF (www.tcpdf.org)